Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
new file mode 100644
index 0000000..653e99f
--- /dev/null
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -0,0 +1,774 @@
+/*******************************************************************************
+
+
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgb_hw.h"
+#include "ixgb_ee.h"
+/* Local prototypes */
+static uint16_t ixgb_shift_in_bits(struct ixgb_hw *hw);
+
+static void ixgb_shift_out_bits(struct ixgb_hw *hw,
+ uint16_t data,
+ uint16_t count);
+static void ixgb_standby_eeprom(struct ixgb_hw *hw);
+
+static boolean_t ixgb_wait_eeprom_command(struct ixgb_hw *hw);
+
+static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
+
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_raise_clock(struct ixgb_hw *hw,
+ uint32_t *eecd_reg)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg | IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ udelay(50);
+ return;
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_lower_clock(struct ixgb_hw *hw,
+ uint32_t *eecd_reg)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ udelay(50);
+ return;
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void
+ixgb_shift_out_bits(struct ixgb_hw *hw,
+ uint16_t data,
+ uint16_t count)
+{
+ uint32_t eecd_reg;
+ uint32_t mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd_reg &= ~IXGB_EECD_DI;
+
+ if(data & mask)
+ eecd_reg |= IXGB_EECD_DI;
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ udelay(50);
+
+ ixgb_raise_clock(hw, &eecd_reg);
+ ixgb_lower_clock(hw, &eecd_reg);
+
+ mask = mask >> 1;
+
+ } while(mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd_reg &= ~IXGB_EECD_DI;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ return;
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static uint16_t
+ixgb_shift_in_bits(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+ uint32_t i;
+ uint16_t data;
+
+ /* In order to read a register from the EEPROM, we need to shift 16 bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the "DO"
+ * bit. During this "shifting in" process the "DI" bit should always be
+ * clear..
+ */
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ data = 0;
+
+ for(i = 0; i < 16; i++) {
+ data = data << 1;
+ ixgb_raise_clock(hw, &eecd_reg);
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DI);
+ if(eecd_reg & IXGB_EECD_DO)
+ data |= 1;
+
+ ixgb_lower_clock(hw, &eecd_reg);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static void
+ixgb_setup_eeprom(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Clear SK and DI */
+ eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ /* Set CS */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ return;
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_standby_eeprom(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Deselct EEPROM */
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+
+ /* Clock high */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+
+ /* Select EEPROM */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+
+ /* Clock low */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+ return;
+}
+
+/******************************************************************************
+ * Raises then lowers the EEPROM's clock pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clock_eeprom(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Rising edge of clock */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+
+ /* Falling edge of clock */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ udelay(50);
+ return;
+}
+
+/******************************************************************************
+ * Terminates a command by lowering the EEPROM's chip select pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_cleanup_eeprom(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ ixgb_clock_eeprom(hw);
+ return;
+}
+
+/******************************************************************************
+ * Waits for the EEPROM to finish the current command.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * The command is done when the EEPROM's data out pin goes high.
+ *
+ * Returns:
+ * TRUE: EEPROM data pin is high before timeout.
+ * FALSE: Time expired.
+ *****************************************************************************/
+static boolean_t
+ixgb_wait_eeprom_command(struct ixgb_hw *hw)
+{
+ uint32_t eecd_reg;
+ uint32_t i;
+
+ /* Toggle the CS line. This in effect tells to EEPROM to actually execute
+ * the command in question.
+ */
+ ixgb_standby_eeprom(hw);
+
+ /* Now read DO repeatedly until is high (equal to '1'). The EEEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for(i = 0; i < 200; i++) {
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ if(eecd_reg & IXGB_EECD_DO)
+ return (TRUE);
+
+ udelay(50);
+ }
+ ASSERT(0);
+ return (FALSE);
+}
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *
+ * Returns:
+ * TRUE: Checksum is valid
+ * FALSE: Checksum is not valid.
+ *****************************************************************************/
+boolean_t
+ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
+{
+ uint16_t checksum = 0;
+ uint16_t i;
+
+ for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ if(checksum == (uint16_t) EEPROM_SUM)
+ return (TRUE);
+ else
+ return (FALSE);
+}
+
+/******************************************************************************
+ * Calculates the EEPROM checksum and writes it to the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ *****************************************************************************/
+void
+ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
+{
+ uint16_t checksum = 0;
+ uint16_t i;
+
+ for(i = 0; i < EEPROM_CHECKSUM_REG; i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ checksum = (uint16_t) EEPROM_SUM - checksum;
+
+ ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
+ return;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * reg - offset within the EEPROM to be written to
+ * data - 16 bit word to be writen to the EEPROM
+ *
+ * If ixgb_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ *
+ *****************************************************************************/
+void
+ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ /* Prepare the EEPROM for writing */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
+ * plus 4-bit dummy). This puts the EEPROM into write/erase mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Prepare the EEPROM */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the Write command (3-bit opcode + 6-bit addr) */
+ ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Send the data */
+ ixgb_shift_out_bits(hw, data, 16);
+
+ ixgb_wait_eeprom_command(hw);
+
+ /* Recover from write */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
+ * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
+ * mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Done with writing */
+ ixgb_cleanup_eeprom(hw);
+
+ /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
+ ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR;
+
+ return;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of 16 bit word in the EEPROM to read
+ *
+ * Returns:
+ * The 16-bit value read from the eeprom
+ *****************************************************************************/
+uint16_t
+ixgb_read_eeprom(struct ixgb_hw *hw,
+ uint16_t offset)
+{
+ uint16_t data;
+
+ /* Prepare the EEPROM for reading */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the READ command (opcode + addr) */
+ ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
+ /*
+ * We have a 64 word EEPROM, there are 6 address bits
+ */
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Read the data */
+ data = ixgb_shift_in_bits(hw);
+
+ /* End this read operation */
+ ixgb_standby_eeprom(hw);
+
+ return (data);
+}
+
+/******************************************************************************
+ * Reads eeprom and stores data in shared structure.
+ * Validates eeprom checksum and eeprom signature.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * TRUE: if eeprom read is successful
+ * FALSE: otherwise.
+ *****************************************************************************/
+boolean_t
+ixgb_get_eeprom_data(struct ixgb_hw *hw)
+{
+ uint16_t i;
+ uint16_t checksum = 0;
+ struct ixgb_ee_map_type *ee_map;
+
+ DEBUGFUNC("ixgb_get_eeprom_data");
+
+ ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ DEBUGOUT("ixgb_ee: Reading eeprom data\n");
+ for(i = 0; i < IXGB_EEPROM_SIZE ; i++) {
+ uint16_t ee_data;
+ ee_data = ixgb_read_eeprom(hw, i);
+ checksum += ee_data;
+ hw->eeprom[i] = le16_to_cpu(ee_data);
+ }
+
+ if (checksum != (uint16_t) EEPROM_SUM) {
+ DEBUGOUT("ixgb_ee: Checksum invalid.\n");
+ /* clear the init_ctrl_reg_1 to signify that the cache is
+ * invalidated */
+ ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR;
+ return (FALSE);
+ }
+
+ if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK))
+ != le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) {
+ DEBUGOUT("ixgb_ee: Signature invalid.\n");
+ return(FALSE);
+ }
+
+ return(TRUE);
+}
+
+/******************************************************************************
+ * Local function to check if the eeprom signature is good
+ * If the eeprom signature is good, calls ixgb)get_eeprom_data.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * TRUE: eeprom signature was good and the eeprom read was successful
+ * FALSE: otherwise.
+ ******************************************************************************/
+static boolean_t
+ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK))
+ == le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) {
+ return (TRUE);
+ } else {
+ return ixgb_get_eeprom_data(hw);
+ }
+}
+
+/******************************************************************************
+ * return a word from the eeprom
+ *
+ * hw - Struct containing variables accessed by shared code
+ * index - Offset of eeprom word
+ *
+ * Returns:
+ * Word at indexed offset in eeprom, if valid, 0 otherwise.
+ ******************************************************************************/
+uint16_t
+ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index)
+{
+
+ if ((index < IXGB_EEPROM_SIZE) &&
+ (ixgb_check_and_get_eeprom_data(hw) == TRUE)) {
+ return(hw->eeprom[index]);
+ }
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the mac address from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
+ *
+ * Returns: None.
+ ******************************************************************************/
+void
+ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
+ uint8_t *mac_addr)
+{
+ int i;
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ DEBUGFUNC("ixgb_get_ee_mac_addr");
+
+ if (ixgb_check_and_get_eeprom_data(hw) == TRUE) {
+ for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
+ mac_addr[i] = ee_map->mac_addr[i];
+ DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]);
+ }
+ }
+}
+
+/******************************************************************************
+ * return the compatibility flags from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * compatibility flags if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_compatibility(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->compatibility);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Printed Board Assembly number from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * PBA number if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint32_t
+ixgb_get_ee_pba_number(struct ixgb_hw *hw)
+{
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return (le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
+ | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16));
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Initialization Control Word 1 from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->init_ctrl_reg_1);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Initialization Control Word 2 from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->init_ctrl_reg_2);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Subsystem Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Subsystem Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_subsystem_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->subsystem_id);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Sub Vendor Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Sub Vendor Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_subvendor_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->subvendor_id);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Device Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Device Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_device_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->device_id);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Vendor Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Device Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_vendor_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->vendor_id);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the Software Defined Pins Register from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * SDP Register if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint16_t
+ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->swdpins_reg);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the D3 Power Management Bits from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * D3 Power Management Bits if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint8_t
+ixgb_get_ee_d3_power(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->d3_power);
+
+ return(0);
+}
+
+/******************************************************************************
+ * return the D0 Power Management Bits from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * D0 Power Management Bits if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+uint8_t
+ixgb_get_ee_d0_power(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ return(ee_map->d0_power);
+
+ return(0);
+}