Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
new file mode 100644
index 0000000..e25f33d
--- /dev/null
+++ b/drivers/net/tulip/dmfe.c
@@ -0,0 +1,2066 @@
+/*
+ A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast
+ ethernet driver for Linux.
+ Copyright (C) 1997 Sten Wang
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ DAVICOM Web-Site: www.davicom.com.tw
+
+ Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw
+ Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu>
+
+ (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+ Marcelo Tosatti <marcelo@conectiva.com.br> :
+ Made it compile in 2.3 (device to net_device)
+
+ Alan Cox <alan@redhat.com> :
+ Cleaned up for kernel merge.
+ Removed the back compatibility support
+ Reformatted, fixing spelling etc as I went
+ Removed IRQ 0-15 assumption
+
+ Jeff Garzik <jgarzik@pobox.com> :
+ Updated to use new PCI driver API.
+ Resource usage cleanups.
+ Report driver version to user.
+
+ Tobias Ringstrom <tori@unhappy.mine.nu> :
+ Cleaned up and added SMP safety. Thanks go to Jeff Garzik,
+ Andrew Morton and Frank Davis for the SMP safety fixes.
+
+ Vojtech Pavlik <vojtech@suse.cz> :
+ Cleaned up pointer arithmetics.
+ Fixed a lot of 64bit issues.
+ Cleaned up printk()s a bit.
+ Fixed some obvious big endian problems.
+
+ Tobias Ringstrom <tori@unhappy.mine.nu> :
+ Use time_after for jiffies calculation. Added ethtool
+ support. Updated PCI resource allocation. Do not
+ forget to unmap PCI mapped skbs.
+
+ Alan Cox <alan@redhat.com>
+ Added new PCI identifiers provided by Clear Zhang at ALi
+ for their 1563 ethernet device.
+
+ TODO
+
+ Implement pci_driver::suspend() and pci_driver::resume()
+ power management methods.
+
+ Check on 64 bit boxes.
+ Check and fix on big endian boxes.
+
+ Test and make sure PCI latency is now correct for all cases.
+*/
+
+#define DRV_NAME "dmfe"
+#define DRV_VERSION "1.36.4"
+#define DRV_RELDATE "2002-01-17"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
+#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */
+#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */
+#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */
+
+#define DM9102_IO_SIZE 0x80
+#define DM9102A_IO_SIZE 0x100
+#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */
+#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
+#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x600
+#define RX_ALLOC_SIZE 0x620
+#define DM910X_RESET 1
+#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */
+#define CR6_DEFAULT 0x00080000 /* HD */
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define DMFE_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+#define DM9801_NOISE_FLOOR 8
+#define DM9802_NOISE_FLOOR 5
+
+#define DMFE_10MHF 0
+#define DMFE_100MHF 1
+#define DMFE_10MFD 4
+#define DMFE_100MFD 5
+#define DMFE_AUTO 8
+#define DMFE_1M_HPNA 0x10
+
+#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */
+#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */
+#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */
+#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */
+#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */
+#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
+#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
+
+#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+
+#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
+#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)
+
+/* Sten Check */
+#define DEVICE net_device
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ struct sk_buff *rx_skb_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct dmfe_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ u32 chip_revision; /* Chip revision */
+ struct DEVICE *next_dev; /* next device */
+ struct pci_dev *pdev; /* PCI device */
+ spinlock_t lock;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_insert_ptr;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+ unsigned long tx_queue_cnt; /* wait to send packet count */
+ unsigned long rx_avail_cnt; /* available rx descriptor count */
+ unsigned long interval_rx_cnt; /* rx packet count a callback time */
+
+ u16 HPNA_command; /* For HPNA register 16 */
+ u16 HPNA_timer; /* For HPNA remote device check */
+ u16 dbug_cnt;
+ u16 NIC_capability; /* NIC media capability */
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */
+ u8 chip_type; /* Keep DM9102A chip type */
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work media mode */
+ u8 phy_addr;
+ u8 link_failed; /* Ever link failed */
+ u8 wait_reset; /* Hardware failed, need to reset */
+ u8 dm910x_chk_mode; /* Operating mode check */
+ u8 first_in_callback; /* Flag to record state */
+ struct timer_list timer;
+
+ /* System defined statistic counter */
+ struct net_device_stats stats;
+
+ /* Driver defined statistic counter */
+ unsigned long tx_fifo_underrun;
+ unsigned long tx_loss_carrier;
+ unsigned long tx_no_carrier;
+ unsigned long tx_late_collision;
+ unsigned long tx_excessive_collision;
+ unsigned long tx_jabber_timeout;
+ unsigned long reset_count;
+ unsigned long reset_cr8;
+ unsigned long reset_fatal;
+ unsigned long reset_TXtimeout;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+};
+
+enum dmfe_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum dmfe_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static char version[] __devinitdata =
+ KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version "
+ DRV_VERSION " (" DRV_RELDATE ")\n";
+
+static int dmfe_debug;
+static unsigned char dmfe_media_mode = DMFE_AUTO;
+static u32 dmfe_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static unsigned char mode = 8;
+static u8 chkmode = 1;
+static u8 HPNA_mode; /* Default: Low Power/High Speed */
+static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */
+static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */
+static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */
+static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control
+ 4: TX pause packet */
+
+
+/* function declaration ------------------------------------- */
+static int dmfe_open(struct DEVICE *);
+static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
+static int dmfe_stop(struct DEVICE *);
+static struct net_device_stats * dmfe_get_stats(struct DEVICE *);
+static void dmfe_set_filter_mode(struct DEVICE *);
+static struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long ,int);
+static irqreturn_t dmfe_interrupt(int , void *, struct pt_regs *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_dmfe (struct net_device *dev);
+#endif
+static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
+static void allocate_rx_buffer(struct dmfe_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct DEVICE * ,int);
+static void dm9132_id_table(struct DEVICE * ,int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_write_1bit(unsigned long, u32);
+static u16 phy_read_1bit(unsigned long);
+static u8 dmfe_sense_speed(struct dmfe_board_info *);
+static void dmfe_process_mode(struct dmfe_board_info *);
+static void dmfe_timer(unsigned long);
+static inline u32 cal_CRC(unsigned char *, unsigned int, u8);
+static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
+static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
+static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
+static void dmfe_dynamic_reset(struct DEVICE *);
+static void dmfe_free_rxbuffer(struct dmfe_board_info *);
+static void dmfe_init_dm910x(struct DEVICE *);
+static void dmfe_parse_srom(struct dmfe_board_info *);
+static void dmfe_program_DM9801(struct dmfe_board_info *, int);
+static void dmfe_program_DM9802(struct dmfe_board_info *);
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
+static void dmfe_set_phyxcer(struct dmfe_board_info *);
+
+/* DM910X network baord routine ---------------------------- */
+
+/*
+ * Search DM910X board ,allocate space and register it
+ */
+
+static int __devinit dmfe_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct dmfe_board_info *db; /* board information structure */
+ struct net_device *dev;
+ u32 dev_rev, pci_pmr;
+ int i, err;
+
+ DMFE_DBUG(0, "dmfe_init_one()", 0);
+
+ if (!printed_version++)
+ printk(version);
+
+ /* Init network device */
+ dev = alloc_etherdev(sizeof(*db));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ err = -ENODEV;
+ goto err_out_free;
+ }
+
+ /* Enable Master/IO access, Disable memory access */
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_out_free;
+
+ if (!pci_resource_start(pdev, 0)) {
+ printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Read Chip revision */
+ pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
+
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+ printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */
+
+ /* Set Latency Timer 80h */
+ /* FIXME: setting values > 32 breaks some SiS 559x stuff.
+ Need a PCI quirk.. */
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
+#endif
+
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Init system & device */
+ db = netdev_priv(dev);
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+ db->chip_id = ent->driver_data;
+ db->ioaddr = pci_resource_start(pdev, 0);
+ db->chip_revision = dev_rev;
+
+ db->pdev = pdev;
+
+ dev->base_addr = db->ioaddr;
+ dev->irq = pdev->irq;
+ pci_set_drvdata(pdev, dev);
+ dev->open = &dmfe_open;
+ dev->hard_start_xmit = &dmfe_start_xmit;
+ dev->stop = &dmfe_stop;
+ dev->get_stats = &dmfe_get_stats;
+ dev->set_multicast_list = &dmfe_set_filter_mode;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &poll_dmfe;
+#endif
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ spin_lock_init(&db->lock);
+
+ pci_read_config_dword(pdev, 0x50, &pci_pmr);
+ pci_pmr &= 0x70000;
+ if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+ db->chip_type = 1; /* DM9102A E3 */
+ else
+ db->chip_type = 0;
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+ /* Set Node address */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = db->srom[20 + i];
+
+ err = register_netdev (dev);
+ if (err)
+ goto err_out_res;
+
+ printk(KERN_INFO "%s: Davicom DM%04lx at pci%s,",
+ dev->name,
+ ent->driver_data >> 16,
+ pci_name(pdev));
+ for (i = 0; i < 6; i++)
+ printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(", irq %d.\n", dev->irq);
+
+ pci_set_master(pdev);
+
+ return 0;
+
+err_out_res:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_free:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+
+ return err;
+}
+
+
+static void __devexit dmfe_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ DMFE_DBUG(0, "dmfe_remove_one()", 0);
+
+ if (dev) {
+ pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ db->desc_pool_dma_ptr);
+ pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+ unregister_netdev(dev);
+ pci_release_regions(pdev);
+ free_netdev(dev); /* free board information */
+ pci_set_drvdata(pdev, NULL);
+ }
+
+ DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
+}
+
+
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
+ */
+
+static int dmfe_open(struct DEVICE *dev)
+{
+ int ret;
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ DMFE_DBUG(0, "dmfe_open", 0);
+
+ ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev);
+ if (ret)
+ return ret;
+
+ /* system variable init */
+ db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set;
+ db->tx_packet_cnt = 0;
+ db->tx_queue_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ db->wait_reset = 0;
+
+ db->first_in_callback = 0;
+ db->NIC_capability = 0xf; /* All capability*/
+ db->PHY_reg4 = 0x1e0;
+
+ /* CR6 operation mode decision */
+ if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
+ (db->chip_revision >= 0x02000030) ) {
+ db->cr6_data |= DMFE_TXTH_256;
+ db->cr0_data = CR0_DEFAULT;
+ db->dm910x_chk_mode=4; /* Enter the normal mode */
+ } else {
+ db->cr6_data |= CR6_SFT; /* Store & Forward mode */
+ db->cr0_data = 0;
+ db->dm910x_chk_mode = 1; /* Enter the check mode */
+ }
+
+ /* Initilize DM910X board */
+ dmfe_init_dm910x(dev);
+
+ /* Active System Interface */
+ netif_wake_queue(dev);
+
+ /* set and active a timer process */
+ init_timer(&db->timer);
+ db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
+ db->timer.data = (unsigned long)dev;
+ db->timer.function = &dmfe_timer;
+ add_timer(&db->timer);
+
+ return 0;
+}
+
+
+/* Initilize DM910X board
+ * Reset DM910X board
+ * Initilize TX/Rx descriptor chain structure
+ * Send the set-up frame
+ * Enable Tx/Rx machine
+ */
+
+static void dmfe_init_dm910x(struct DEVICE *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = db->ioaddr;
+
+ DMFE_DBUG(0, "dmfe_init_dm910x()", 0);
+
+ /* Reset DM910x MAC controller */
+ outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */
+ udelay(100);
+ outl(db->cr0_data, ioaddr + DCR0);
+ udelay(5);
+
+ /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */
+ db->phy_addr = 1;
+
+ /* Parser SROM and media mode */
+ dmfe_parse_srom(db);
+ db->media_mode = dmfe_media_mode;
+
+ /* RESET Phyxcer Chip by GPR port bit 7 */
+ outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */
+ if (db->chip_id == PCI_DM9009_ID) {
+ outl(0x80, ioaddr + DCR12); /* Issue RESET signal */
+ mdelay(300); /* Delay 300 ms */
+ }
+ outl(0x0, ioaddr + DCR12); /* Clear RESET signal */
+
+ /* Process Phyxcer Media Mode */
+ if ( !(db->media_mode & 0x10) ) /* Force 1M mode */
+ dmfe_set_phyxcer(db);
+
+ /* Media Mode Process */
+ if ( !(db->media_mode & DMFE_AUTO) )
+ db->op_mode = db->media_mode; /* Force Mode */
+
+ /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ dmfe_descriptor_init(db, ioaddr);
+
+ /* Init CR6 to program DM910x operation */
+ update_cr6(db->cr6_data, ioaddr);
+
+ /* Send setup frame */
+ if (db->chip_id == PCI_DM9132_ID)
+ dm9132_id_table(dev, dev->mc_count); /* DM9132 */
+ else
+ send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+
+ /* Init CR7, interrupt active bit */
+ db->cr7_data = CR7_DEFAULT;
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ /* Init CR15, Tx jabber and Rx watchdog timer */
+ outl(db->cr15_data, ioaddr + DCR15);
+
+ /* Enable DM910X Tx/Rx function */
+ db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000;
+ update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+
+static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ struct tx_desc *txptr;
+ unsigned long flags;
+
+ DMFE_DBUG(0, "dmfe_start_xmit", 0);
+
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
+ /* Too large packet check */
+ if (skb->len > MAX_PACKET_SIZE) {
+ printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* No Tx resource check, it never happen nromally */
+ if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_queue_cnt);
+ return 1;
+ }
+
+ /* Disable NIC interrupt */
+ outl(0, dev->base_addr + DCR7);
+
+ /* transmit this packet */
+ txptr = db->tx_insert_ptr;
+ memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+ txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+ /* Point to next transmit free descriptor */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+
+ /* Transmit Packet Process */
+ if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ dev->trans_start = jiffies; /* saved time stamp */
+ } else {
+ db->tx_queue_cnt++; /* queue TX packet */
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ }
+
+ /* Tx resource check */
+ if ( db->tx_queue_cnt < TX_FREE_DESC_CNT )
+ netif_wake_queue(dev);
+
+ /* Restore CR7 to enable interrupt */
+ spin_unlock_irqrestore(&db->lock, flags);
+ outl(db->cr7_data, dev->base_addr + DCR7);
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+
+static int dmfe_stop(struct DEVICE *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ DMFE_DBUG(0, "dmfe_stop", 0);
+
+ /* disable system */
+ netif_stop_queue(dev);
+
+ /* deleted timer */
+ del_timer_sync(&db->timer);
+
+ /* Reset & stop DM910X board */
+ outl(DM910X_RESET, ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* free interrupt */
+ free_irq(dev->irq, dev);
+
+ /* free allocated rx buffer */
+ dmfe_free_rxbuffer(db);
+
+#if 0
+ /* show statistic counter */
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ db->tx_fifo_underrun, db->tx_excessive_collision,
+ db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+ db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+ db->reset_fatal, db->reset_TXtimeout);
+#endif
+
+ return 0;
+}
+
+
+/*
+ * DM9102 insterrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t dmfe_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct DEVICE *dev = dev_id;
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ DMFE_DBUG(0, "dmfe_interrupt()", 0);
+
+ if (!dev) {
+ DMFE_DBUG(1, "dmfe_interrupt() without DEVICE arg", 0);
+ return IRQ_NONE;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Got DM910X status */
+ db->cr5_data = inl(ioaddr + DCR5);
+ outl(db->cr5_data, ioaddr + DCR5);
+ if ( !(db->cr5_data & 0xc1) ) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ /* Disable all interrupt in CR7 to solve the interrupt edge problem */
+ outl(0, ioaddr + DCR7);
+
+ /* Check system status */
+ if (db->cr5_data & 0x2000) {
+ /* system bus error happen */
+ DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+ db->reset_fatal++;
+ db->wait_reset = 1; /* Need to RESET */
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ /* Received the coming packet */
+ if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+ dmfe_rx_packet(dev, db);
+
+ /* reallocate rx descriptor buffer */
+ if (db->rx_avail_cnt<RX_DESC_CNT)
+ allocate_rx_buffer(db);
+
+ /* Free the transmitted descriptor */
+ if ( db->cr5_data & 0x01)
+ dmfe_free_tx_pkt(dev, db);
+
+ /* Mode Check */
+ if (db->dm910x_chk_mode & 0x2) {
+ db->dm910x_chk_mode = 0x4;
+ db->cr6_data |= 0x100;
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+
+ /* Restore CR7 to enable interrupt mask */
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_dmfe (struct net_device *dev)
+{
+ /* disable_irq here is not very nice, but with the lockless
+ interrupt handler we have no other choice. */
+ disable_irq(dev->irq);
+ dmfe_interrupt (dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+/*
+ * Free TX resource after TX complete
+ */
+
+static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
+{
+ struct tx_desc *txptr;
+ unsigned long ioaddr = dev->base_addr;
+ u32 tdes0;
+
+ txptr = db->tx_remove_ptr;
+ while(db->tx_packet_cnt) {
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
+ break;
+
+ /* A packet sent completed */
+ db->tx_packet_cnt--;
+ db->stats.tx_packets++;
+
+ /* Transmit statistic counter */
+ if ( tdes0 != 0x7fffffff ) {
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ db->stats.collisions += (tdes0 >> 3) & 0xf;
+ db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ if (tdes0 & TDES0_ERR_MASK) {
+ db->stats.tx_errors++;
+
+ if (tdes0 & 0x0002) { /* UnderRun */
+ db->tx_fifo_underrun++;
+ if ( !(db->cr6_data & CR6_SFT) ) {
+ db->cr6_data = db->cr6_data | CR6_SFT;
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ }
+ if (tdes0 & 0x0100)
+ db->tx_excessive_collision++;
+ if (tdes0 & 0x0200)
+ db->tx_late_collision++;
+ if (tdes0 & 0x0400)
+ db->tx_no_carrier++;
+ if (tdes0 & 0x0800)
+ db->tx_loss_carrier++;
+ if (tdes0 & 0x4000)
+ db->tx_jabber_timeout++;
+ }
+ }
+
+ txptr = txptr->next_tx_desc;
+ }/* End of while */
+
+ /* Update TX remove pointer to next */
+ db->tx_remove_ptr = txptr;
+
+ /* Send the Tx packet in queue */
+ if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ db->tx_queue_cnt--;
+ outl(0x1, ioaddr + DCR1); /* Issue Tx polling */
+ dev->trans_start = jiffies; /* saved time stamp */
+ }
+
+ /* Resource available check */
+ if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT )
+ netif_wake_queue(dev); /* Active upper layer, send again */
+}
+
+
+/*
+ * Calculate the CRC valude of the Rx packet
+ * flag = 1 : return the reverse CRC (for the received packet CRC)
+ * 0 : return the normal CRC (for Hash Table index)
+ */
+
+static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
+{
+ u32 crc = crc32(~0, Data, Len);
+ if (flag) crc = ~crc;
+ return crc;
+}
+
+
+/*
+ * Receive the come packet and pass to upper layer
+ */
+
+static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+ int rxlen;
+ u32 rdes0;
+
+ rxptr = db->rx_ready_ptr;
+
+ while(db->rx_avail_cnt) {
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+ if (rdes0 & 0x80000000) /* packet owner check */
+ break;
+
+ db->rx_avail_cnt--;
+ db->interval_rx_cnt++;
+
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ if ( (rdes0 & 0x300) != 0x300) {
+ /* A packet without First/Last flag */
+ /* reuse this SKB */
+ DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ /* A packet with First/Last flag */
+ rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+ /* error summary bit check */
+ if (rdes0 & 0x8000) {
+ /* This is a error packet */
+ //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+ db->stats.rx_errors++;
+ if (rdes0 & 1)
+ db->stats.rx_fifo_errors++;
+ if (rdes0 & 2)
+ db->stats.rx_crc_errors++;
+ if (rdes0 & 0x80)
+ db->stats.rx_length_errors++;
+ }
+
+ if ( !(rdes0 & 0x8000) ||
+ ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+ skb = rxptr->rx_skb_ptr;
+
+ /* Received Packet CRC check need or not */
+ if ( (db->dm910x_chk_mode & 1) &&
+ (cal_CRC(skb->tail, rxlen, 1) !=
+ (*(u32 *) (skb->tail+rxlen) ))) { /* FIXME (?) */
+ /* Found a error received packet */
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ db->dm910x_chk_mode = 3;
+ } else {
+ /* Good packet, send to upper layer */
+ /* Shorst packet used new SKB */
+ if ( (rxlen < RX_COPY_SIZE) &&
+ ( (skb = dev_alloc_skb(rxlen + 2) )
+ != NULL) ) {
+ /* size less than COPY_SIZE, allocate a rxlen SKB */
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16byte align */
+ memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ skb->dev = dev;
+ skb_put(skb, rxlen);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ db->stats.rx_packets++;
+ db->stats.rx_bytes += rxlen;
+ }
+ } else {
+ /* Reuse SKB buffer when the packet is error */
+ DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+ }
+ }
+
+ rxptr = rxptr->next_rx_desc;
+ }
+
+ db->rx_ready_ptr = rxptr;
+}
+
+
+/*
+ * Get statistics from driver.
+ */
+
+static struct net_device_stats * dmfe_get_stats(struct DEVICE *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ DMFE_DBUG(0, "dmfe_get_stats", 0);
+ return &db->stats;
+}
+
+
+/*
+ * Set DM910X multicast address
+ */
+
+static void dmfe_set_filter_mode(struct DEVICE * dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+
+ DMFE_DBUG(0, "dmfe_set_filter_mode()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+ if (dev->flags & IFF_PROMISC) {
+ DMFE_DBUG(0, "Enable PROM Mode", 0);
+ db->cr6_data |= CR6_PM | CR6_PBF;
+ update_cr6(db->cr6_data, db->ioaddr);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ if (dev->flags & IFF_ALLMULTI || dev->mc_count > DMFE_MAX_MULTICAST) {
+ DMFE_DBUG(0, "Pass all multicast address", dev->mc_count);
+ db->cr6_data &= ~(CR6_PM | CR6_PBF);
+ db->cr6_data |= CR6_PAM;
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ DMFE_DBUG(0, "Set multicast address", dev->mc_count);
+ if (db->chip_id == PCI_DM9132_ID)
+ dm9132_id_table(dev, dev->mc_count); /* DM9132 */
+ else
+ send_filter_frame(dev, dev->mc_count); /* DM9102/DM9102A */
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct dmfe_board_info *np = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ if (np->pdev)
+ strcpy(info->bus_info, pci_name(np->pdev));
+ else
+ sprintf(info->bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+/*
+ * A periodic timer routine
+ * Dynamic media sense, allocate Rx buffer...
+ */
+
+static void dmfe_timer(unsigned long data)
+{
+ u32 tmp_cr8;
+ unsigned char tmp_cr12;
+ struct DEVICE *dev = (struct DEVICE *) data;
+ struct dmfe_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+
+ DMFE_DBUG(0, "dmfe_timer()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Media mode process when Link OK before enter this route */
+ if (db->first_in_callback == 0) {
+ db->first_in_callback = 1;
+ if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
+ db->cr6_data &= ~0x40000;
+ update_cr6(db->cr6_data, db->ioaddr);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+ db->cr6_data |= 0x40000;
+ update_cr6(db->cr6_data, db->ioaddr);
+ db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+ }
+
+
+ /* Operating Mode Check */
+ if ( (db->dm910x_chk_mode & 0x1) &&
+ (db->stats.rx_packets > MAX_CHECK_PACKET) )
+ db->dm910x_chk_mode = 0x4;
+
+ /* Dynamic reset DM910X : system error or transmit time-out */
+ tmp_cr8 = inl(db->ioaddr + DCR8);
+ if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+ db->reset_cr8++;
+ db->wait_reset = 1;
+ }
+ db->interval_rx_cnt = 0;
+
+ /* TX polling kick monitor */
+ if ( db->tx_packet_cnt &&
+ time_after(jiffies, dev->trans_start + DMFE_TX_KICK) ) {
+ outl(0x1, dev->base_addr + DCR1); /* Tx polling again */
+
+ /* TX Timeout */
+ if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) {
+ db->reset_TXtimeout++;
+ db->wait_reset = 1;
+ printk(KERN_WARNING "%s: Tx timeout - resetting\n",
+ dev->name);
+ }
+ }
+
+ if (db->wait_reset) {
+ DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+ db->reset_count++;
+ dmfe_dynamic_reset(dev);
+ db->first_in_callback = 0;
+ db->timer.expires = DMFE_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ /* Link status check, Dynamic media type change */
+ if (db->chip_id == PCI_DM9132_ID)
+ tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */
+ else
+ tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
+
+ if ( ((db->chip_id == PCI_DM9102_ID) &&
+ (db->chip_revision == 0x02000030)) ||
+ ((db->chip_id == PCI_DM9132_ID) &&
+ (db->chip_revision == 0x02000010)) ) {
+ /* DM9102A Chip */
+ if (tmp_cr12 & 2)
+ tmp_cr12 = 0x0; /* Link failed */
+ else
+ tmp_cr12 = 0x3; /* Link OK */
+ }
+
+ if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+ /* Link Failed */
+ DMFE_DBUG(0, "Link Failed", tmp_cr12);
+ db->link_failed = 1;
+
+ /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+ /* AUTO or force 1M Homerun/Longrun don't need */
+ if ( !(db->media_mode & 0x38) )
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+
+ /* AUTO mode, if INT phyxcer link failed, select EXT device */
+ if (db->media_mode & DMFE_AUTO) {
+ /* 10/100M link failed, used 1M Home-Net */
+ db->cr6_data|=0x00040000; /* bit18=1, MII */
+ db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ } else
+ if ((tmp_cr12 & 0x3) && db->link_failed) {
+ DMFE_DBUG(0, "Link link OK", tmp_cr12);
+ db->link_failed = 0;
+
+ /* Auto Sense Speed */
+ if ( (db->media_mode & DMFE_AUTO) &&
+ dmfe_sense_speed(db) )
+ db->link_failed = 1;
+ dmfe_process_mode(db);
+ /* SHOW_MEDIA_TYPE(db->op_mode); */
+ }
+
+ /* HPNA remote command check */
+ if (db->HPNA_command & 0xf00) {
+ db->HPNA_timer--;
+ if (!db->HPNA_timer)
+ dmfe_HPNA_remote_cmd_chk(db);
+ }
+
+ /* Timer active again */
+ db->timer.expires = DMFE_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ * Dynamic reset the DM910X board
+ * Stop DM910X board
+ * Free Tx/Rx allocated memory
+ * Reset DM910X board
+ * Re-initilize DM910X board
+ */
+
+static void dmfe_dynamic_reset(struct DEVICE *dev)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+
+ DMFE_DBUG(0, "dmfe_dynamic_reset()", 0);
+
+ /* Sopt MAC controller */
+ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
+ update_cr6(db->cr6_data, dev->base_addr);
+ outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
+ outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+ /* Disable upper layer interface */
+ netif_stop_queue(dev);
+
+ /* Free Rx Allocate buffer */
+ dmfe_free_rxbuffer(db);
+
+ /* system variable init */
+ db->tx_packet_cnt = 0;
+ db->tx_queue_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ db->wait_reset = 0;
+
+ /* Re-initilize DM910X board */
+ dmfe_init_dm910x(dev);
+
+ /* Restart upper layer interface */
+ netif_wake_queue(dev);
+}
+
+
+/*
+ * free all allocated rx buffer
+ */
+
+static void dmfe_free_rxbuffer(struct dmfe_board_info * db)
+{
+ DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0);
+
+ /* free allocated rx buffer */
+ while (db->rx_avail_cnt) {
+ dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+ db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+ db->rx_avail_cnt--;
+ }
+}
+
+
+/*
+ * Reuse the SK buffer
+ */
+
+static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
+{
+ struct rx_desc *rxptr = db->rx_insert_ptr;
+
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+ rxptr->rx_skb_ptr = skb;
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ db->rx_avail_cnt++;
+ db->rx_insert_ptr = rxptr->next_rx_desc;
+ } else
+ DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ * Initialize transmit/Receive descriptor
+ * Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr)
+{
+ struct tx_desc *tmp_tx;
+ struct rx_desc *tmp_rx;
+ unsigned char *tmp_buf;
+ dma_addr_t tmp_tx_dma, tmp_rx_dma;
+ dma_addr_t tmp_buf_dma;
+ int i;
+
+ DMFE_DBUG(0, "dmfe_descriptor_init()", 0);
+
+ /* tx descriptor start pointer */
+ db->tx_insert_ptr = db->first_tx_desc;
+ db->tx_remove_ptr = db->first_tx_desc;
+ outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+
+ /* rx descriptor start pointer */
+ db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->rx_insert_ptr = db->first_rx_desc;
+ db->rx_ready_ptr = db->first_rx_desc;
+ outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+
+ /* Init Transmit chain */
+ tmp_buf = db->buf_pool_start;
+ tmp_buf_dma = db->buf_pool_dma_start;
+ tmp_tx_dma = db->first_tx_desc_dma;
+ for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx->tx_buf_ptr = tmp_buf;
+ tmp_tx->tdes0 = cpu_to_le32(0);
+ tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
+ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+ tmp_tx_dma += sizeof(struct tx_desc);
+ tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
+ tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+ }
+ (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+ tmp_tx->next_tx_desc = db->first_tx_desc;
+
+ /* Init Receive descriptor chain */
+ tmp_rx_dma=db->first_rx_desc_dma;
+ for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+ tmp_rx->rdes0 = cpu_to_le32(0);
+ tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+ tmp_rx_dma += sizeof(struct rx_desc);
+ tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+ tmp_rx->next_rx_desc = tmp_rx + 1;
+ }
+ (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+ tmp_rx->next_rx_desc = db->first_rx_desc;
+
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
+}
+
+
+/*
+ * Update CR6 value
+ * Firstly stop DM910X , then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+ u32 cr6_tmp;
+
+ cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */
+ outl(cr6_tmp, ioaddr + DCR6);
+ udelay(5);
+ outl(cr6_data, ioaddr + DCR6);
+ udelay(5);
+}
+
+
+/*
+ * Send a setup frame for DM9132
+ * This setup frame initilize DM910X address filter mode
+*/
+
+static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
+{
+ struct dev_mc_list *mcptr;
+ u16 * addrptr;
+ unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */
+ u32 hash_val;
+ u16 i, hash_table[4];
+
+ DMFE_DBUG(0, "dm9132_id_table()", 0);
+
+ /* Node address */
+ addrptr = (u16 *) dev->dev_addr;
+ outw(addrptr[0], ioaddr);
+ ioaddr += 4;
+ outw(addrptr[1], ioaddr);
+ ioaddr += 4;
+ outw(addrptr[2], ioaddr);
+ ioaddr += 4;
+
+ /* Clear Hash Table */
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0x0;
+
+ /* broadcast address */
+ hash_table[3] = 0x8000;
+
+ /* the multicast address in Hash Table : 64 bits */
+ for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+ hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+ }
+
+ /* Write the hash table to MAC MD table */
+ for (i = 0; i < 4; i++, ioaddr += 4)
+ outw(hash_table[i], ioaddr);
+}
+
+
+/*
+ * Send a setup frame for DM9102/DM9102A
+ * This setup frame initilize DM910X address filter mode
+ */
+
+static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
+{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ struct dev_mc_list *mcptr;
+ struct tx_desc *txptr;
+ u16 * addrptr;
+ u32 * suptr;
+ int i;
+
+ DMFE_DBUG(0, "send_filter_frame()", 0);
+
+ txptr = db->tx_insert_ptr;
+ suptr = (u32 *) txptr->tx_buf_ptr;
+
+ /* Node address */
+ addrptr = (u16 *) dev->dev_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+
+ /* broadcast address */
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+
+ /* fit the multicast address */
+ for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ addrptr = (u16 *) mcptr->dmi_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+ }
+
+ for (; i<14; i++) {
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ }
+
+ /* prepare the setup frame */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+ txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+ /* Resource Check and Send the setup packet */
+ if (!db->tx_packet_cnt) {
+ /* Resource Empty */
+ db->tx_packet_cnt++;
+ txptr->tdes0 = cpu_to_le32(0x80000000);
+ update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ update_cr6(db->cr6_data, dev->base_addr);
+ dev->trans_start = jiffies;
+ } else
+ db->tx_queue_cnt++; /* Put in TX queue */
+}
+
+
+/*
+ * Allocate rx buffer,
+ * As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct dmfe_board_info *db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+
+ rxptr = db->rx_insert_ptr;
+
+ while(db->rx_avail_cnt < RX_DESC_CNT) {
+ if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+ break;
+ rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ rxptr = rxptr->next_rx_desc;
+ db->rx_avail_cnt++;
+ }
+
+ db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+
+/*
+ * Auto sense the media mode
+ */
+
+static u8 dmfe_sense_speed(struct dmfe_board_info * db)
+{
+ u8 ErrFlag = 0;
+ u16 phy_mode;
+
+ /* CR6 bit18=0, select 10/100M */
+ update_cr6( (db->cr6_data & ~0x40000), db->ioaddr);
+
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+ if ( (phy_mode & 0x24) == 0x24 ) {
+ if (db->chip_id == PCI_DM9132_ID) /* DM9132 */
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 7, db->chip_id) & 0xf000;
+ else /* DM9102/DM9102A */
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000;
+ /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+ switch (phy_mode) {
+ case 0x1000: db->op_mode = DMFE_10MHF; break;
+ case 0x2000: db->op_mode = DMFE_10MFD; break;
+ case 0x4000: db->op_mode = DMFE_100MHF; break;
+ case 0x8000: db->op_mode = DMFE_100MFD; break;
+ default: db->op_mode = DMFE_10MHF;
+ ErrFlag = 1;
+ break;
+ }
+ } else {
+ db->op_mode = DMFE_10MHF;
+ DMFE_DBUG(0, "Link Failed :", phy_mode);
+ ErrFlag = 1;
+ }
+
+ return ErrFlag;
+}
+
+
+/*
+ * Set 10/100 phyxcer capability
+ * AUTO mode : phyxcer register4 is NIC capability
+ * Force mode: phyxcer register4 is the force media
+ */
+
+static void dmfe_set_phyxcer(struct dmfe_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Select 10/100M phyxcer */
+ db->cr6_data &= ~0x40000;
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* DM9009 Chip: Phyxcer reg18 bit12=0 */
+ if (db->chip_id == PCI_DM9009_ID) {
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 18, db->chip_id) & ~0x1000;
+ phy_write(db->ioaddr, db->phy_addr, 18, phy_reg, db->chip_id);
+ }
+
+ /* Phyxcer capability setting */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+ if (db->media_mode & DMFE_AUTO) {
+ /* AUTO Mode */
+ phy_reg |= db->PHY_reg4;
+ } else {
+ /* Force Mode */
+ switch(db->media_mode) {
+ case DMFE_10MHF: phy_reg |= 0x20; break;
+ case DMFE_10MFD: phy_reg |= 0x40; break;
+ case DMFE_100MHF: phy_reg |= 0x80; break;
+ case DMFE_100MFD: phy_reg |= 0x100; break;
+ }
+ if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61;
+ }
+
+ /* Write new capability to Phyxcer Reg4 */
+ if ( !(phy_reg & 0x01e0)) {
+ phy_reg|=db->PHY_reg4;
+ db->media_mode|=DMFE_AUTO;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ /* Restart Auto-Negotiation */
+ if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
+ if ( !db->chip_type )
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+}
+
+
+/*
+ * Process op-mode
+ * AUTO mode : PHY controller in Auto-negotiation Mode
+ * Force mode: PHY controller in force mode with HUB
+ * N-way force capability with SWITCH
+ */
+
+static void dmfe_process_mode(struct dmfe_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Full Duplex Mode Check */
+ if (db->op_mode & 0x4)
+ db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
+ else
+ db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
+
+ /* Transciver Selection */
+ if (db->op_mode & 0x10) /* 1M HomePNA */
+ db->cr6_data |= 0x40000;/* External MII select */
+ else
+ db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */
+
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* 10/100M phyxcer force mode need */
+ if ( !(db->media_mode & 0x18)) {
+ /* Forece Mode */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+ if ( !(phy_reg & 0x1) ) {
+ /* parter without N-Way capability */
+ phy_reg = 0x0;
+ switch(db->op_mode) {
+ case DMFE_10MHF: phy_reg = 0x0; break;
+ case DMFE_10MFD: phy_reg = 0x100; break;
+ case DMFE_100MHF: phy_reg = 0x2000; break;
+ case DMFE_100MFD: phy_reg = 0x2100; break;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+ mdelay(20);
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ }
+ }
+}
+
+
+/*
+ * Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+{
+ u16 i;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_DM9132_ID) {
+ ioaddr = iobase + 0x80 + offset * 4;
+ outw(phy_data, ioaddr);
+ } else {
+ /* DM9102/DM9102A Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0);
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+
+ /* Send write command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0);
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+
+ /* written trasnition */
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+ phy_write_1bit(ioaddr, PHY_DATA_0);
+
+ /* Write a word data to PHY controller */
+ for ( i = 0x8000; i > 0; i >>= 1)
+ phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+ }
+}
+
+
+/*
+ * Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+ int i;
+ u16 phy_data;
+ unsigned long ioaddr;
+
+ if (chip_id == PCI_DM9132_ID) {
+ /* DM9132 Chip */
+ ioaddr = iobase + 0x80 + offset * 4;
+ phy_data = inw(ioaddr);
+ } else {
+ /* DM9102/DM9102A Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0);
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+
+ /* Send read command(10) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_1);
+ phy_write_1bit(ioaddr, PHY_DATA_0);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0);
+
+ /* Skip transition state */
+ phy_read_1bit(ioaddr);
+
+ /* read 16bit data */
+ for (phy_data = 0, i = 0; i < 16; i++) {
+ phy_data <<= 1;
+ phy_data |= phy_read_1bit(ioaddr);
+ }
+ }
+
+ return phy_data;
+}
+
+
+/*
+ * Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data)
+{
+ outl(phy_data, ioaddr); /* MII Clock Low */
+ udelay(1);
+ outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ udelay(1);
+ outl(phy_data, ioaddr); /* MII Clock Low */
+ udelay(1);
+}
+
+
+/*
+ * Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr)
+{
+ u16 phy_data;
+
+ outl(0x50000, ioaddr);
+ udelay(1);
+ phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+ outl(0x40000, ioaddr);
+ udelay(1);
+
+ return phy_data;
+}
+
+
+/*
+ * Parser SROM and media mode
+ */
+
+static void dmfe_parse_srom(struct dmfe_board_info * db)
+{
+ char * srom = db->srom;
+ int dmfe_mode, tmp_reg;
+
+ DMFE_DBUG(0, "dmfe_parse_srom() ", 0);
+
+ /* Init CR15 */
+ db->cr15_data = CR15_DEFAULT;
+
+ /* Check SROM Version */
+ if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) {
+ /* SROM V4.01 */
+ /* Get NIC support media mode */
+ db->NIC_capability = le16_to_cpup(srom + 34);
+ db->PHY_reg4 = 0;
+ for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
+ switch( db->NIC_capability & tmp_reg ) {
+ case 0x1: db->PHY_reg4 |= 0x0020; break;
+ case 0x2: db->PHY_reg4 |= 0x0040; break;
+ case 0x4: db->PHY_reg4 |= 0x0080; break;
+ case 0x8: db->PHY_reg4 |= 0x0100; break;
+ }
+ }
+
+ /* Media Mode Force or not check */
+ dmfe_mode = le32_to_cpup(srom + 34) & le32_to_cpup(srom + 36);
+ switch(dmfe_mode) {
+ case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */
+ case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */
+ case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */
+ case 0x100:
+ case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */
+ }
+
+ /* Special Function setting */
+ /* VLAN function */
+ if ( (SF_mode & 0x1) || (srom[43] & 0x80) )
+ db->cr15_data |= 0x40;
+
+ /* Flow Control */
+ if ( (SF_mode & 0x2) || (srom[40] & 0x1) )
+ db->cr15_data |= 0x400;
+
+ /* TX pause packet */
+ if ( (SF_mode & 0x4) || (srom[40] & 0xe) )
+ db->cr15_data |= 0x9800;
+ }
+
+ /* Parse HPNA parameter */
+ db->HPNA_command = 1;
+
+ /* Accept remote command or not */
+ if (HPNA_rx_cmd == 0)
+ db->HPNA_command |= 0x8000;
+
+ /* Issue remote command & operation mode */
+ if (HPNA_tx_cmd == 1)
+ switch(HPNA_mode) { /* Issue Remote Command */
+ case 0: db->HPNA_command |= 0x0904; break;
+ case 1: db->HPNA_command |= 0x0a00; break;
+ case 2: db->HPNA_command |= 0x0506; break;
+ case 3: db->HPNA_command |= 0x0602; break;
+ }
+ else
+ switch(HPNA_mode) { /* Don't Issue */
+ case 0: db->HPNA_command |= 0x0004; break;
+ case 1: db->HPNA_command |= 0x0000; break;
+ case 2: db->HPNA_command |= 0x0006; break;
+ case 3: db->HPNA_command |= 0x0002; break;
+ }
+
+ /* Check DM9801 or DM9802 present or not */
+ db->HPNA_present = 0;
+ update_cr6(db->cr6_data|0x40000, db->ioaddr);
+ tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
+ if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) {
+ /* DM9801 or DM9802 present */
+ db->HPNA_timer = 8;
+ if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) {
+ /* DM9801 HomeRun */
+ db->HPNA_present = 1;
+ dmfe_program_DM9801(db, tmp_reg);
+ } else {
+ /* DM9802 LongRun */
+ db->HPNA_present = 2;
+ dmfe_program_DM9802(db);
+ }
+ }
+
+}
+
+
+/*
+ * Init HomeRun DM9801
+ */
+
+static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev)
+{
+ uint reg17, reg25;
+
+ if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR;
+ switch(HPNA_rev) {
+ case 0xb900: /* DM9801 E3 */
+ db->HPNA_command |= 0x1000;
+ reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id);
+ reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
+ reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+ break;
+ case 0xb901: /* DM9801 E4 */
+ reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+ reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor;
+ reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+ reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3;
+ break;
+ case 0xb902: /* DM9801 E5 */
+ case 0xb903: /* DM9801 E6 */
+ default:
+ db->HPNA_command |= 0x1000;
+ reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+ reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5;
+ reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+ reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor;
+ break;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id);
+}
+
+
+/*
+ * Init HomeRun DM9802
+ */
+
+static void dmfe_program_DM9802(struct dmfe_board_info * db)
+{
+ uint phy_reg;
+
+ if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
+ phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+ phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor;
+ phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id);
+}
+
+
+/*
+ * Check remote HPNA power and speed status. If not correct,
+ * issue command again.
+*/
+
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
+{
+ uint phy_reg;
+
+ /* Got remote device status */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60;
+ switch(phy_reg) {
+ case 0x00: phy_reg = 0x0a00;break; /* LP/LS */
+ case 0x20: phy_reg = 0x0900;break; /* LP/HS */
+ case 0x40: phy_reg = 0x0600;break; /* HP/LS */
+ case 0x60: phy_reg = 0x0500;break; /* HP/HS */
+ }
+
+ /* Check remote device status match our setting ot not */
+ if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
+ phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+ db->HPNA_timer=8;
+ } else
+ db->HPNA_timer=600; /* Match, every 10 minutes, check */
+}
+
+
+
+static struct pci_device_id dmfe_pci_tbl[] = {
+ { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
+ { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
+ { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
+ { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
+
+
+static struct pci_driver dmfe_driver = {
+ .name = "dmfe",
+ .id_table = dmfe_pci_tbl,
+ .probe = dmfe_init_one,
+ .remove = __devexit_p(dmfe_remove_one),
+};
+
+MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw");
+MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(debug, int, 0);
+module_param(mode, byte, 0);
+module_param(cr6set, int, 0);
+module_param(chkmode, byte, 0);
+module_param(HPNA_mode, byte, 0);
+module_param(HPNA_rx_cmd, byte, 0);
+module_param(HPNA_tx_cmd, byte, 0);
+module_param(HPNA_NoiseFloor, byte, 0);
+module_param(SF_mode, byte, 0);
+MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function (bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
+
+/* Description:
+ * when user used insmod to add module, system invoked init_module()
+ * to initilize and register.
+ */
+
+static int __init dmfe_init_module(void)
+{
+ int rc;
+
+ printk(version);
+ printed_version = 1;
+
+ DMFE_DBUG(0, "init_module() ", debug);
+
+ if (debug)
+ dmfe_debug = debug; /* set debug flag */
+ if (cr6set)
+ dmfe_cr6_user_set = cr6set;
+
+ switch(mode) {
+ case DMFE_10MHF:
+ case DMFE_100MHF:
+ case DMFE_10MFD:
+ case DMFE_100MFD:
+ case DMFE_1M_HPNA:
+ dmfe_media_mode = mode;
+ break;
+ default:dmfe_media_mode = DMFE_AUTO;
+ break;
+ }
+
+ if (HPNA_mode > 4)
+ HPNA_mode = 0; /* Default: LP/HS */
+ if (HPNA_rx_cmd > 1)
+ HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */
+ if (HPNA_tx_cmd > 1)
+ HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */
+ if (HPNA_NoiseFloor > 15)
+ HPNA_NoiseFloor = 0;
+
+ rc = pci_module_init(&dmfe_driver);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+
+/*
+ * Description:
+ * when user used rmmod to delete module, system invoked clean_module()
+ * to un-register all registered services.
+ */
+
+static void __exit dmfe_cleanup_module(void)
+{
+ DMFE_DBUG(0, "dmfe_clean_module() ", debug);
+ pci_unregister_driver(&dmfe_driver);
+}
+
+module_init(dmfe_init_module);
+module_exit(dmfe_cleanup_module);