Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
new file mode 100644
index 0000000..7690d98
--- /dev/null
+++ b/drivers/usb/host/sl811.h
@@ -0,0 +1,266 @@
+/*
+ * SL811HS register declarations and HCD data structures
+ *
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ * Copyright (C) 2001 Cypress Semiconductor Inc.
+ */
+
+/*
+ * SL811HS has transfer registers, and control registers. In host/master
+ * mode one set of registers is used; in peripheral/slave mode, another.
+ * - SL11H only has some "A" transfer registers from 0x00-0x04
+ * - SL811HS also has "B" registers from 0x08-0x0c
+ * - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
+ */
+
+#define SL811_EP_A(base) ((base) + 0)
+#define SL811_EP_B(base) ((base) + 8)
+
+#define SL811_HOST_BUF 0x00
+#define SL811_PERIPH_EP0 0x00
+#define SL811_PERIPH_EP1 0x10
+#define SL811_PERIPH_EP2 0x20
+#define SL811_PERIPH_EP3 0x30
+
+
+/* TRANSFER REGISTERS: host and peripheral sides are similar
+ * except for the control models (master vs slave).
+ */
+#define SL11H_HOSTCTLREG 0
+# define SL11H_HCTLMASK_ARM 0x01
+# define SL11H_HCTLMASK_ENABLE 0x02
+# define SL11H_HCTLMASK_IN 0x00
+# define SL11H_HCTLMASK_OUT 0x04
+# define SL11H_HCTLMASK_ISOCH 0x10
+# define SL11H_HCTLMASK_AFTERSOF 0x20
+# define SL11H_HCTLMASK_TOGGLE 0x40
+# define SL11H_HCTLMASK_PREAMBLE 0x80
+#define SL11H_BUFADDRREG 1
+#define SL11H_BUFLNTHREG 2
+#define SL11H_PKTSTATREG 3 /* read */
+# define SL11H_STATMASK_ACK 0x01
+# define SL11H_STATMASK_ERROR 0x02
+# define SL11H_STATMASK_TMOUT 0x04
+# define SL11H_STATMASK_SEQ 0x08
+# define SL11H_STATMASK_SETUP 0x10
+# define SL11H_STATMASK_OVF 0x20
+# define SL11H_STATMASK_NAK 0x40
+# define SL11H_STATMASK_STALL 0x80
+#define SL11H_PIDEPREG 3 /* write */
+# define SL_SETUP 0xd0
+# define SL_IN 0x90
+# define SL_OUT 0x10
+# define SL_SOF 0x50
+# define SL_PREAMBLE 0xc0
+# define SL_NAK 0xa0
+# define SL_STALL 0xe0
+# define SL_DATA0 0x30
+# define SL_DATA1 0xb0
+#define SL11H_XFERCNTREG 4 /* read */
+#define SL11H_DEVADDRREG 4 /* write */
+
+
+/* CONTROL REGISTERS: host and peripheral are very different.
+ */
+#define SL11H_CTLREG1 5
+# define SL11H_CTL1MASK_SOF_ENA 0x01
+# define SL11H_CTL1MASK_FORCE 0x18
+# define SL11H_CTL1MASK_NORMAL 0x00
+# define SL11H_CTL1MASK_SE0 0x08 /* reset */
+# define SL11H_CTL1MASK_J 0x10
+# define SL11H_CTL1MASK_K 0x18 /* resume */
+# define SL11H_CTL1MASK_LSPD 0x20
+# define SL11H_CTL1MASK_SUSPEND 0x40
+#define SL11H_IRQ_ENABLE 6
+# define SL11H_INTMASK_DONE_A 0x01
+# define SL11H_INTMASK_DONE_B 0x02
+# define SL11H_INTMASK_SOFINTR 0x10
+# define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */
+# define SL11H_INTMASK_RD 0x40
+# define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */
+#define SL11S_ADDRESS 7
+
+/* 0x08-0x0c are for the B buffer (not in SL11) */
+
+#define SL11H_IRQ_STATUS 0x0D /* write to ack */
+#define SL11H_HWREVREG 0x0E /* read */
+# define SL11H_HWRMASK_HWREV 0xF0
+#define SL11H_SOFLOWREG 0x0E /* write */
+#define SL11H_SOFTMRREG 0x0F /* read */
+
+/* a write to this register enables SL811HS features.
+ * HOST flag presumably overrides the chip input signal?
+ */
+#define SL811HS_CTLREG2 0x0F
+# define SL811HS_CTL2MASK_SOF_MASK 0x3F
+# define SL811HS_CTL2MASK_DSWAP 0x40
+# define SL811HS_CTL2MASK_HOST 0x80
+
+#define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e)
+
+
+/* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
+ * that's 240 bytes, which we'll split evenly between A and B sides.
+ * Only ISO can use more than 64 bytes per packet.
+ * (The SL11S has 0x40..0xff for buffers.)
+ */
+#define H_MAXPACKET 120 /* bytes in A or B fifos */
+
+#define SL11H_DATA_START 0x10
+#define SL811HS_PACKET_BUF(is_a) ((is_a) \
+ ? SL11H_DATA_START \
+ : (SL11H_DATA_START + H_MAXPACKET))
+
+/*-------------------------------------------------------------------------*/
+
+#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
+#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
+
+struct sl811 {
+ spinlock_t lock;
+ void __iomem *addr_reg;
+ void __iomem *data_reg;
+ struct sl811_platform_data *board;
+ struct proc_dir_entry *pde;
+
+ unsigned long stat_insrmv;
+ unsigned long stat_wake;
+ unsigned long stat_sof;
+ unsigned long stat_a;
+ unsigned long stat_b;
+ unsigned long stat_lost;
+ unsigned long stat_overrun;
+
+ /* sw model */
+ struct timer_list timer;
+ struct sl811h_ep *next_periodic;
+ struct sl811h_ep *next_async;
+
+ struct sl811h_ep *active_a;
+ unsigned long jiffies_a;
+ struct sl811h_ep *active_b;
+ unsigned long jiffies_b;
+
+ u32 port1;
+ u8 ctrl1, ctrl2, irq_enable;
+ u16 frame;
+
+ /* async schedule: control, bulk */
+ struct list_head async;
+
+ /* periodic schedule: interrupt, iso */
+ u16 load[PERIODIC_SIZE];
+ struct sl811h_ep *periodic[PERIODIC_SIZE];
+ unsigned periodic_count;
+};
+
+static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
+{
+ return (struct sl811 *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
+{
+ return container_of((void *) sl811, struct usb_hcd, hcd_priv);
+}
+
+struct sl811h_ep {
+ struct usb_host_endpoint *hep;
+ struct usb_device *udev;
+
+ u8 defctrl;
+ u8 maxpacket;
+ u8 epnum;
+ u8 nextpid;
+
+ u16 error_count;
+ u16 nak_count;
+ u16 length; /* of current packet */
+
+ /* periodic schedule */
+ u16 period;
+ u16 branch;
+ u16 load;
+ struct sl811h_ep *next;
+
+ /* async schedule */
+ struct list_head schedule;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* These register utilities should work for the SL811S register API too
+ * NOTE: caller must hold sl811->lock.
+ */
+
+static inline u8 sl811_read(struct sl811 *sl811, int reg)
+{
+ writeb(reg, sl811->addr_reg);
+ return readb(sl811->data_reg);
+}
+
+static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
+{
+ writeb(reg, sl811->addr_reg);
+ writeb(val, sl811->data_reg);
+}
+
+static inline void
+sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
+{
+ const u8 *data;
+ void __iomem *data_reg;
+
+ if (!count)
+ return;
+ writeb(addr, sl811->addr_reg);
+
+ data = buf;
+ data_reg = sl811->data_reg;
+ do {
+ writeb(*data++, data_reg);
+ } while (--count);
+}
+
+static inline void
+sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
+{
+ u8 *data;
+ void __iomem *data_reg;
+
+ if (!count)
+ return;
+ writeb(addr, sl811->addr_reg);
+
+ data = buf;
+ data_reg = sl811->data_reg;
+ do {
+ *data++ = readb(data_reg);
+ } while (--count);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(stuff...) printk(KERN_DEBUG "sl811: " stuff)
+#else
+#define DBG(stuff...) do{}while(0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(stuff...) do{}while(0)
+#endif
+
+#ifdef PACKET_TRACE
+# define PACKET VDBG
+#else
+# define PACKET(stuff...) do{}while(0)
+#endif
+
+#define ERR(stuff...) printk(KERN_ERR "sl811: " stuff)
+#define WARN(stuff...) printk(KERN_WARNING "sl811: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "sl811: " stuff)
+