Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-alpha/core_irongate.h b/include/asm-alpha/core_irongate.h
new file mode 100644
index 0000000..24b2db5
--- /dev/null
+++ b/include/asm-alpha/core_irongate.h
@@ -0,0 +1,232 @@
+#ifndef __ALPHA_IRONGATE__H__
+#define __ALPHA_IRONGATE__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * IRONGATE is the internal name for the AMD-751 K7 core logic chipset
+ * which provides memory controller and PCI access for NAUTILUS-based
+ * EV6 (21264) systems.
+ *
+ * This file is based on:
+ *
+ * IronGate management library, (c) 1999 Alpha Processor, Inc.
+ * Copyright (C) 1999 Alpha Processor, Inc.,
+ * (David Daniel, Stig Telfer, Soohoon Lee)
+ */
+
+/*
+ * The 21264 supports, and internally recognizes, a 44-bit physical
+ * address space that is divided equally between memory address space
+ * and I/O address space. Memory address space resides in the lower
+ * half of the physical address space (PA[43]=0) and I/O address space
+ * resides in the upper half of the physical address space (PA[43]=1).
+ */
+
+/*
+ * Irongate CSR map. Some of the CSRs are 8 or 16 bits, but all access
+ * through the routines given is 32-bit.
+ *
+ * The first 0x40 bytes are standard as per the PCI spec.
+ */
+
+typedef volatile __u32 igcsr32;
+
+typedef struct {
+ igcsr32 dev_vendor; /* 0x00 - device ID, vendor ID */
+ igcsr32 stat_cmd; /* 0x04 - status, command */
+ igcsr32 class; /* 0x08 - class code, rev ID */
+ igcsr32 latency; /* 0x0C - header type, PCI latency */
+ igcsr32 bar0; /* 0x10 - BAR0 - AGP */
+ igcsr32 bar1; /* 0x14 - BAR1 - GART */
+ igcsr32 bar2; /* 0x18 - Power Management reg block */
+
+ igcsr32 rsrvd0[6]; /* 0x1C-0x33 reserved */
+
+ igcsr32 capptr; /* 0x34 - Capabilities pointer */
+
+ igcsr32 rsrvd1[2]; /* 0x38-0x3F reserved */
+
+ igcsr32 bacsr10; /* 0x40 - base address chip selects */
+ igcsr32 bacsr32; /* 0x44 - base address chip selects */
+ igcsr32 bacsr54_eccms761; /* 0x48 - 751: base addr. chip selects
+ 761: ECC, mode/status */
+
+ igcsr32 rsrvd2[1]; /* 0x4C-0x4F reserved */
+
+ igcsr32 drammap; /* 0x50 - address mapping control */
+ igcsr32 dramtm; /* 0x54 - timing, driver strength */
+ igcsr32 dramms; /* 0x58 - DRAM mode/status */
+
+ igcsr32 rsrvd3[1]; /* 0x5C-0x5F reserved */
+
+ igcsr32 biu0; /* 0x60 - bus interface unit */
+ igcsr32 biusip; /* 0x64 - Serial initialisation pkt */
+
+ igcsr32 rsrvd4[2]; /* 0x68-0x6F reserved */
+
+ igcsr32 mro; /* 0x70 - memory request optimiser */
+
+ igcsr32 rsrvd5[3]; /* 0x74-0x7F reserved */
+
+ igcsr32 whami; /* 0x80 - who am I */
+ igcsr32 pciarb; /* 0x84 - PCI arbitration control */
+ igcsr32 pcicfg; /* 0x88 - PCI config status */
+
+ igcsr32 rsrvd6[4]; /* 0x8C-0x9B reserved */
+
+ igcsr32 pci_mem; /* 0x9C - PCI top of memory,
+ 761 only */
+
+ /* AGP (bus 1) control registers */
+ igcsr32 agpcap; /* 0xA0 - AGP Capability Identifier */
+ igcsr32 agpstat; /* 0xA4 - AGP status register */
+ igcsr32 agpcmd; /* 0xA8 - AGP control register */
+ igcsr32 agpva; /* 0xAC - AGP Virtual Address Space */
+ igcsr32 agpmode; /* 0xB0 - AGP/GART mode control */
+} Irongate0;
+
+
+typedef struct {
+
+ igcsr32 dev_vendor; /* 0x00 - Device and Vendor IDs */
+ igcsr32 stat_cmd; /* 0x04 - Status and Command regs */
+ igcsr32 class; /* 0x08 - subclass, baseclass etc */
+ igcsr32 htype; /* 0x0C - header type (at 0x0E) */
+ igcsr32 rsrvd0[2]; /* 0x10-0x17 reserved */
+ igcsr32 busnos; /* 0x18 - Primary, secondary bus nos */
+ igcsr32 io_baselim_regs; /* 0x1C - IO base, IO lim, AGP status */
+ igcsr32 mem_baselim; /* 0x20 - memory base, memory lim */
+ igcsr32 pfmem_baselim; /* 0x24 - prefetchable base, lim */
+ igcsr32 rsrvd1[2]; /* 0x28-0x2F reserved */
+ igcsr32 io_baselim; /* 0x30 - IO base, IO limit */
+ igcsr32 rsrvd2[2]; /* 0x34-0x3B - reserved */
+ igcsr32 interrupt; /* 0x3C - interrupt, PCI bridge ctrl */
+
+} Irongate1;
+
+extern igcsr32 *IronECC;
+
+/*
+ * Memory spaces:
+ */
+
+/* Irongate is consistent with a subset of the Tsunami memory map */
+#ifdef USE_48_BIT_KSEG
+#define IRONGATE_BIAS 0x80000000000UL
+#else
+#define IRONGATE_BIAS 0x10000000000UL
+#endif
+
+
+#define IRONGATE_MEM (IDENT_ADDR | IRONGATE_BIAS | 0x000000000UL)
+#define IRONGATE_IACK_SC (IDENT_ADDR | IRONGATE_BIAS | 0x1F8000000UL)
+#define IRONGATE_IO (IDENT_ADDR | IRONGATE_BIAS | 0x1FC000000UL)
+#define IRONGATE_CONF (IDENT_ADDR | IRONGATE_BIAS | 0x1FE000000UL)
+
+/*
+ * PCI Configuration space accesses are formed like so:
+ *
+ * 0x1FE << 24 | : 2 2 2 2 1 1 1 1 : 1 1 1 1 1 1 0 0 : 0 0 0 0 0 0 0 0 :
+ * : 3 2 1 0 9 8 7 6 : 5 4 3 2 1 0 9 8 : 7 6 5 4 3 2 1 0 :
+ * ---bus numer--- -device-- -fun- ---register----
+ */
+
+#define IGCSR(dev,fun,reg) ( IRONGATE_CONF | \
+ ((dev)<<11) | \
+ ((fun)<<8) | \
+ (reg) )
+
+#define IRONGATE0 ((Irongate0 *) IGCSR(0, 0, 0))
+#define IRONGATE1 ((Irongate1 *) IGCSR(1, 0, 0))
+
+/*
+ * Data structure for handling IRONGATE machine checks:
+ * This is the standard OSF logout frame
+ */
+
+#define SCB_Q_SYSERR 0x620 /* OSF definitions */
+#define SCB_Q_PROCERR 0x630
+#define SCB_Q_SYSMCHK 0x660
+#define SCB_Q_PROCMCHK 0x670
+
+struct el_IRONGATE_sysdata_mcheck {
+ __u32 FrameSize; /* Bytes, including this field */
+ __u32 FrameFlags; /* <31> = Retry, <30> = Second Error */
+ __u32 CpuOffset; /* Offset to CPU-specific into */
+ __u32 SystemOffset; /* Offset to system-specific info */
+ __u32 MCHK_Code;
+ __u32 MCHK_Frame_Rev;
+ __u64 I_STAT;
+ __u64 DC_STAT;
+ __u64 C_ADDR;
+ __u64 DC1_SYNDROME;
+ __u64 DC0_SYNDROME;
+ __u64 C_STAT;
+ __u64 C_STS;
+ __u64 RESERVED0;
+ __u64 EXC_ADDR;
+ __u64 IER_CM;
+ __u64 ISUM;
+ __u64 MM_STAT;
+ __u64 PAL_BASE;
+ __u64 I_CTL;
+ __u64 PCTX;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * IRONGATE (AMD-751) PCI/memory support chip for the EV6 (21264) and
+ * K7 can only use linear accesses to get at PCI memory and I/O spaces.
+ */
+
+/*
+ * Memory functions. All accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *irongate_ioportmap(unsigned long addr)
+{
+ return (void __iomem *)(addr + IRONGATE_IO);
+}
+
+extern void __iomem *irongate_ioremap(unsigned long addr, unsigned long size);
+extern void irongate_iounmap(volatile void __iomem *addr);
+
+__EXTERN_INLINE int irongate_is_ioaddr(unsigned long addr)
+{
+ return addr >= IRONGATE_MEM;
+}
+
+__EXTERN_INLINE int irongate_is_mmio(const volatile void __iomem *xaddr)
+{
+ unsigned long addr = (unsigned long)xaddr;
+ return addr < IRONGATE_IO || addr >= IRONGATE_CONF;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX irongate
+#define irongate_trivial_rw_bw 1
+#define irongate_trivial_rw_lq 1
+#define irongate_trivial_io_bw 1
+#define irongate_trivial_io_lq 1
+#define irongate_trivial_iounmap 0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_IRONGATE__H__ */