diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h
new file mode 100644
index 0000000..6669193
--- /dev/null
+++ b/include/asm-arm26/ecard.h
@@ -0,0 +1,294 @@
+/*
+ * linux/include/asm-arm26/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ *  11-12-1996	RMK	Further minor improvements
+ *  12-09-1997	RMK	Added interrupt enable/disable for card level
+ *  18-05-2003  IM      Adjusted for ARM26
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ *                        Manufacturer  Product ID
+ */
+#define MANU_ACORN		0x0000
+#define PROD_ACORN_SCSI			0x0002
+#define PROD_ACORN_ETHER1		0x0003
+#define PROD_ACORN_MFM			0x000b
+
+#define MANU_CCONCEPTS		0x0009
+#define PROD_CCONCEPTS_COLOURCARD	0x0050
+
+#define MANU_ANT2		0x0011
+#define PROD_ANT_ETHER3			0x00a4
+
+#define MANU_ATOMWIDE		0x0017
+#define PROD_ATOMWIDE_3PSERIAL		0x0090
+
+#define MANU_IRLAM_INSTRUMENTS	0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
+
+#define MANU_OAK		0x0021
+#define PROD_OAK_SCSI			0x0058
+
+#define MANU_MORLEY		0x002b
+#define PROD_MORLEY_SCSI_UNCACHED	0x0067
+
+#define MANU_CUMANA		0x003a
+#define PROD_CUMANA_SCSI_2		0x003a
+#define PROD_CUMANA_SCSI_1		0x00a0
+
+#define MANU_ICS		0x003c
+#define PROD_ICS_IDE			0x00ae
+
+#define MANU_ICS2		0x003d
+#define PROD_ICS2_IDE			0x00ae
+
+#define MANU_SERPORT		0x003f
+#define PROD_SERPORT_DSPORT		0x00b9
+
+#define MANU_ARXE		0x0041
+#define PROD_ARXE_SCSI			0x00be
+
+#define MANU_I3			0x0046
+#define PROD_I3_ETHERLAN500		0x00d4
+#define PROD_I3_ETHERLAN600		0x00ec
+#define PROD_I3_ETHERLAN600A		0x011e
+
+#define MANU_ANT		0x0053
+#define PROD_ANT_ETHERM			0x00d8
+#define PROD_ANT_ETHERB			0x00e4
+
+#define MANU_ALSYSTEMS		0x005b
+#define PROD_ALSYS_SCSIATAPI		0x0107
+
+#define MANU_MCS		0x0063
+#define PROD_MCS_CONNECT32		0x0125
+
+#define MANU_EESOX		0x0064
+#define PROD_EESOX_SCSI2		0x008c
+
+#define MANU_YELLOWSTONE	0x0096
+#define PROD_YELLOWSTONE_RAPIDE32	0x0120
+
+#define MANU_SIMTEC             0x005f
+#define PROD_SIMTEC_IDE8                0x0130
+#define PROD_SIMTEC_IDE16               0x0131
+
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS	4
+
+typedef enum {				/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;
+
+struct ecard_id {			/* Card ID structure		*/
+	unsigned short	manufacturer;
+	unsigned short	product;
+	void		*data;
+};
+
+struct in_ecid {			/* Packed card ID information	*/
+	unsigned short	product;	/* Product code			*/
+	unsigned short	manufacturer;	/* Manufacturer code		*/
+	unsigned char	id:4;		/* Simple ID			*/
+	unsigned char	cd:1;		/* Chunk dir present		*/
+	unsigned char	is:1;		/* Interrupt status pointers	*/
+	unsigned char	w:2;		/* Width			*/
+	unsigned char	country;	/* Country			*/
+	unsigned char	irqmask;	/* IRQ mask			*/
+	unsigned char	fiqmask;	/* FIQ mask			*/
+	unsigned long	irqoff;		/* IRQ offset			*/
+	unsigned long	fiqoff;		/* FIQ offset			*/
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct {			/* Card handler routines	*/
+	void (*irqenable)(ecard_t *ec, int irqnr);
+	void (*irqdisable)(ecard_t *ec, int irqnr);
+	int  (*irqpending)(ecard_t *ec);
+	void (*fiqenable)(ecard_t *ec, int fiqnr);
+	void (*fiqdisable)(ecard_t *ec, int fiqnr);
+	int  (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES	(6)
+
+#define ECARD_RES_IOCSLOW	(0)
+#define ECARD_RES_IOCMEDIUM	(1)
+#define ECARD_RES_IOCFAST	(2)
+#define ECARD_RES_IOCSYNC	(3)
+#define ECARD_RES_MEMC		(4)
+#define ECARD_RES_EASI		(5)
+
+#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
+					 (ec)->resource[nr].start + 1)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+	struct expansion_card  *next;
+
+	struct device		dev;
+	struct resource		resource[ECARD_NUM_RESOURCES];
+
+	/* Public data */
+	volatile unsigned char *irqaddr;     /* address of IRQ register */
+	volatile unsigned char *fiqaddr;     /* address of FIQ register */
+	unsigned char		irqmask;     /* IRQ mask */
+	unsigned char		fiqmask;     /* FIQ mask */
+	unsigned char  		claimed;     /* Card claimed? */
+
+	void			*irq_data;   /* Data for use for IRQ by card */
+	void			*fiq_data;   /* Data for use for FIQ by card */
+	const expansioncard_ops_t *ops;	     /* Enable/Disable Ops for card */
+
+	CONST unsigned int	slot_no;     /* Slot number */
+	CONST unsigned int	dma;         /* DMA number (for request_dma) */
+	CONST unsigned int	irq;         /* IRQ number (for request_irq) */
+	CONST unsigned int	fiq;         /* FIQ number (for request_irq) */
+	CONST card_type_t	type;        /* Type of card */
+	CONST struct in_ecid	cid;         /* Card Identification */
+
+	/* Private internal data */
+	const char		*card_desc;  /* Card description */
+	CONST unsigned int	podaddr;     /* Base Linux address for card */
+	CONST loader_t		loader;      /* loader program */
+	u64			dma_mask;
+};
+
+struct in_chunk_dir {
+	unsigned int start_offset;
+	union {
+		unsigned char string[256];
+		unsigned char data[1];
+	} d;
+};
+
+/*
+ * ecard_claim: claim an expansion card entry
+ * FIXME - are these atomic / called with interrupts off ?
+ */
+#define ecard_claim(ec) ((ec)->claimed = 1)
+
+/*
+ * ecard_release: release an expansion card entry
+ */
+#define ecard_release(ec) ((ec)->claimed = 0)
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Obtain the address of a card
+ */
+extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
+
+#ifdef ECARD_C
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+	unsigned char	r_irq:1;
+	unsigned char	r_zero:1;
+	unsigned char	r_fiq:1;
+	unsigned char	r_id:4;
+	unsigned char	r_a:1;
+
+	unsigned char	r_cd:1;
+	unsigned char	r_is:1;
+	unsigned char	r_w:2;
+	unsigned char	r_r1:4;
+
+	unsigned char	r_r2:8;
+
+	unsigned char	r_prod[2];
+
+	unsigned char	r_manu[2];
+
+	unsigned char	r_country;
+
+	unsigned char	r_irqmask;
+	unsigned char	r_irqoff[3];
+
+	unsigned char	r_fiqmask;
+	unsigned char	r_fiqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+	unsigned char r_id;
+	unsigned char r_len[3];
+	unsigned long r_start;
+	union {
+		char string[256];
+		char data[1];
+	} d;
+#define c_id(x)		((x)->r_id)
+#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x)	((x)->r_start)
+};
+
+#endif
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
+	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
+	const struct ecard_id	*id_table;
+	unsigned int		id;
+	struct device_driver	drv;
+};
+
+#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif