Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
new file mode 100644
index 0000000..73348c3
--- /dev/null
+++ b/include/asm-m32r/system.h
@@ -0,0 +1,299 @@
+#ifndef _ASM_M32R_SYSTEM_H
+#define _ASM_M32R_SYSTEM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 by Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ *
+ * `next' and `prev' should be struct task_struct, but it isn't always defined
+ */
+
+#ifndef CONFIG_SMP
+#define prepare_to_switch() do { } while(0)
+#endif /* not CONFIG_SMP */
+
+#define switch_to(prev, next, last) do { \
+ register unsigned long arg0 __asm__ ("r0") = (unsigned long)prev; \
+ register unsigned long arg1 __asm__ ("r1") = (unsigned long)next; \
+ register unsigned long *oldsp __asm__ ("r2") = &(prev->thread.sp); \
+ register unsigned long *newsp __asm__ ("r3") = &(next->thread.sp); \
+ register unsigned long *oldlr __asm__ ("r4") = &(prev->thread.lr); \
+ register unsigned long *newlr __asm__ ("r5") = &(next->thread.lr); \
+ register struct task_struct *__last __asm__ ("r6"); \
+ __asm__ __volatile__ ( \
+ "st r8, @-r15 \n\t" \
+ "st r9, @-r15 \n\t" \
+ "st r10, @-r15 \n\t" \
+ "st r11, @-r15 \n\t" \
+ "st r12, @-r15 \n\t" \
+ "st r13, @-r15 \n\t" \
+ "st r14, @-r15 \n\t" \
+ "seth r14, #high(1f) \n\t" \
+ "or3 r14, r14, #low(1f) \n\t" \
+ "st r14, @r4 ; store old LR \n\t" \
+ "st r15, @r2 ; store old SP \n\t" \
+ "ld r15, @r3 ; load new SP \n\t" \
+ "st r0, @-r15 ; store 'prev' onto new stack \n\t" \
+ "ld r14, @r5 ; load new LR \n\t" \
+ "jmp r14 \n\t" \
+ ".fillinsn \n " \
+ "1: \n\t" \
+ "ld r6, @r15+ ; load 'prev' from new stack \n\t" \
+ "ld r14, @r15+ \n\t" \
+ "ld r13, @r15+ \n\t" \
+ "ld r12, @r15+ \n\t" \
+ "ld r11, @r15+ \n\t" \
+ "ld r10, @r15+ \n\t" \
+ "ld r9, @r15+ \n\t" \
+ "ld r8, @r15+ \n\t" \
+ : "=&r" (__last) \
+ : "r" (arg0), "r" (arg1), "r" (oldsp), "r" (newsp), \
+ "r" (oldlr), "r" (newlr) \
+ : "memory" \
+ ); \
+ last = __last; \
+} while(0)
+
+/* Interrupt Control */
+#if !defined(CONFIG_CHIP_M32102)
+#define local_irq_enable() \
+ __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory")
+#define local_irq_disable() \
+ __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory")
+#else /* CONFIG_CHIP_M32102 */
+static inline void local_irq_enable(void)
+{
+ unsigned long tmpreg;
+ __asm__ __volatile__(
+ "mvfc %0, psw; \n\t"
+ "or3 %0, %0, #0x0040; \n\t"
+ "mvtc %0, psw; \n\t"
+ : "=&r" (tmpreg) : : "cbit", "memory");
+}
+
+static inline void local_irq_disable(void)
+{
+ unsigned long tmpreg0, tmpreg1;
+ __asm__ __volatile__(
+ "ld24 %0, #0 ; Use 32-bit insn. \n\t"
+ "mvfc %1, psw ; No interrupt can be accepted here. \n\t"
+ "mvtc %0, psw \n\t"
+ "and3 %0, %1, #0xffbf \n\t"
+ "mvtc %0, psw \n\t"
+ : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory");
+}
+#endif /* CONFIG_CHIP_M32102 */
+
+#define local_save_flags(x) \
+ __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */)
+
+#define local_irq_restore(x) \
+ __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \
+ : "r" (x) : "cbit", "memory")
+
+#if !defined(CONFIG_CHIP_M32102)
+#define local_irq_save(x) \
+ __asm__ __volatile__( \
+ "mvfc %0, psw; \n\t" \
+ "clrpsw #0x40 -> nop; \n\t" \
+ : "=r" (x) : /* no input */ : "memory")
+#else /* CONFIG_CHIP_M32102 */
+#define local_irq_save(x) \
+ ({ \
+ unsigned long tmpreg; \
+ __asm__ __volatile__( \
+ "ld24 %1, #0 \n\t" \
+ "mvfc %0, psw \n\t" \
+ "mvtc %1, psw \n\t" \
+ "and3 %1, %0, #0xffbf \n\t" \
+ "mvtc %1, psw \n\t" \
+ : "=r" (x), "=&r" (tmpreg) \
+ : : "cbit", "memory"); \
+ })
+#endif /* CONFIG_CHIP_M32102 */
+
+#define irqs_disabled() \
+ ({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ !(flags & 0x40); \
+ })
+
+#endif /* __KERNEL__ */
+
+#define nop() __asm__ __volatile__ ("nop" : : )
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+#ifdef CONFIG_SMP
+extern void __xchg_called_with_bad_pointer(void);
+#endif
+
+#ifdef CONFIG_CHIP_M32700_TS1
+#define DCACHE_CLEAR(reg0, reg1, addr) \
+ "seth "reg1", #high(dcache_dummy); \n\t" \
+ "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \
+ "lock "reg0", @"reg1"; \n\t" \
+ "add3 "reg0", "addr", #0x1000; \n\t" \
+ "ld "reg0", @"reg0"; \n\t" \
+ "add3 "reg0", "addr", #0x2000; \n\t" \
+ "ld "reg0", @"reg0"; \n\t" \
+ "unlock "reg0", @"reg1"; \n\t"
+ /* FIXME: This workaround code cannot handle kenrel modules
+ * correctly under SMP environment.
+ */
+#else /* CONFIG_CHIP_M32700_TS1 */
+#define DCACHE_CLEAR(reg0, reg1, addr)
+#endif /* CONFIG_CHIP_M32700_TS1 */
+
+static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr,
+ int size)
+{
+ unsigned long flags;
+ unsigned long tmp = 0;
+
+ local_irq_save(flags);
+
+ switch (size) {
+#ifndef CONFIG_SMP
+ case 1:
+ __asm__ __volatile__ (
+ "ldb %0, @%2 \n\t"
+ "stb %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__ (
+ "ldh %0, @%2 \n\t"
+ "sth %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__ (
+ "ld %0, @%2 \n\t"
+ "st %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+#else /* CONFIG_SMP */
+ case 4:
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%2")
+ "lock %0, @%2; \n\t"
+ "unlock %1, @%2; \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ break;
+ default:
+ __xchg_called_with_bad_pointer();
+#endif /* CONFIG_SMP */
+ }
+
+ local_irq_restore(flags);
+
+ return (tmp);
+}
+
+/*
+ * Memory barrier.
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ */
+#define mb() barrier()
+#define rmb() mb()
+#define wmb() mb()
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like thiswhere there are no data dependencies.
+ **/
+
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#endif
+
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_M32R_SYSTEM_H */