Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h
new file mode 100644
index 0000000..427245f
--- /dev/null
+++ b/include/asm-sh/bigsur/bigsur.h
@@ -0,0 +1,80 @@
+/*
+ *
+ * Hitachi Big Sur Eval Board support
+ *
+ * Dustin McIntire (dustin@sensoria.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Derived from Hitachi SH7751 reference manual
+ *
+ */
+
+#ifndef _ASM_BIGSUR_H_
+#define _ASM_BIGSUR_H_
+
+#include <asm/irq.h>
+#include <asm/hd64465/hd64465.h>
+
+/* 7751 Internal IRQ's used by external CPLD controller */
+#define BIGSUR_IRQ_LOW 0
+#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */
+#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
+#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM)
+#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */
+#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \
+ BIGSUR_2NDLVL_IRQ_NUM)
+
+/* PCI interrupt base number (A_INTA-A_INTD) */
+#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10)
+
+/* CPLD registers and external chip addresses */
+#define BIGSUR_HD64464_ADDR 0xB2000000
+#define BIGSUR_DGDR 0xB1FFFE00
+#define BIGSUR_BIDR 0xB1FFFD00
+#define BIGSUR_CSLR 0xB1FFFC00
+#define BIGSUR_SW1R 0xB1FFFB00
+#define BIGSUR_DBGR 0xB1FFFA00
+#define BIGSUR_BDTR 0xB1FFF900
+#define BIGSUR_BDRR 0xB1FFF800
+#define BIGSUR_PPR1 0xB1FFF700
+#define BIGSUR_PPR2 0xB1FFF600
+#define BIGSUR_IDE2 0xB1FFF500
+#define BIGSUR_IDE3 0xB1FFF400
+#define BIGSUR_SPCR 0xB1FFF300
+#define BIGSUR_ETHR 0xB1FE0000
+#define BIGSUR_PPDR 0xB1FDFF00
+#define BIGSUR_ICTL 0xB1FDFE00
+#define BIGSUR_ICMD 0xB1FDFD00
+#define BIGSUR_DMA0 0xB1FDFC00
+#define BIGSUR_DMA1 0xB1FDFB00
+#define BIGSUR_IRQ0 0xB1FDFA00
+#define BIGSUR_IRQ1 0xB1FDF900
+#define BIGSUR_IRQ2 0xB1FDF800
+#define BIGSUR_IRQ3 0xB1FDF700
+#define BIGSUR_IMR0 0xB1FDF600
+#define BIGSUR_IMR1 0xB1FDF500
+#define BIGSUR_IMR2 0xB1FDF400
+#define BIGSUR_IMR3 0xB1FDF300
+#define BIGSUR_IRLMR0 0xB1FDF200
+#define BIGSUR_IRLMR1 0xB1FDF100
+#define BIGSUR_V320USC_ADDR 0xB1000000
+#define BIGSUR_HD64465_ADDR 0xB0000000
+#define BIGSUR_INTERNAL_BASE 0xB0000000
+
+/* SMC ethernet card parameters */
+#define BIGSUR_ETHER_IOPORT 0x220
+
+/* IDE register paramters */
+#define BIGSUR_IDECMD_IOPORT 0x1f0
+#define BIGSUR_IDECTL_IOPORT 0x1f8
+
+/* LED bit position in BIGSUR_CSLR */
+#define BIGSUR_LED (1<<4)
+
+/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
+#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB
+#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB
+
+#endif /* _ASM_BIGSUR_H_ */