arch/mips/sibyte/sb1250/bus_watcher.c - kernel/msm - Gitiles

 /*
  * Copyright (C) 2002,2003 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */

 /*
  * The Bus Watcher monitors internal bus transactions and maintains
  * counts of transactions with error status, logging details and
  * causing one of several interrupts.  This driver provides a handler
  * for those interrupts which aggregates the counts (to avoid
  * saturating the 8-bit counters) and provides a presence in
  * /proc/bus_watcher if PROC_FS is on.
  */

 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <asm/system.h>
 #include <asm/io.h>

 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>


 struct bw_stats_struct {
 	uint64_t status;
 	uint32_t l2_err;
 	uint32_t memio_err;
 	int status_printed;
 	unsigned long l2_cor_d;
 	unsigned long l2_bad_d;
 	unsigned long l2_cor_t;
 	unsigned long l2_bad_t;
 	unsigned long mem_cor_d;
 	unsigned long mem_bad_d;
 	unsigned long bus_error;
 } bw_stats;


 static void print_summary(uint32_t status, uint32_t l2_err,
 			  uint32_t memio_err)
 {
 	printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
 	printk("\nLast recorded signature:\n");
 	printk("Request %02x from %d, answered by %d with Dcode %d\n",
 	       (unsigned int)(G_SCD_BERR_TID(status) & 0x3f),
 	       (int)(G_SCD_BERR_TID(status) >> 6),
 	       (int)G_SCD_BERR_RID(status),
 	       (int)G_SCD_BERR_DCODE(status));
 }

 /*
  * check_bus_watcher is exported for use in situations where we want
  * to see the most recent status of the bus watcher, which might have
  * already been destructively read out of the registers.
  *
  * notes: this is currently used by the cache error handler
  *        should provide locking against the interrupt handler
  */
 void check_bus_watcher(void)
 {
 	u32 status, l2_err, memio_err;

 #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
 	/* Destructive read, clears register and interrupt */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
 #else
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
 #endif
 	if (!(status & 0x7fffffff)) {
 		printk("Using last values reaped by bus watcher driver\n");
 		status = bw_stats.status;
 		l2_err = bw_stats.l2_err;
 		memio_err = bw_stats.memio_err;
 	} else {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 	}
 	if (status & ~(1UL << 31))
 		print_summary(status, l2_err, memio_err);
 	else
 		printk("Bus watcher indicates no error\n");
 }

 static int bw_print_buffer(char *page, struct bw_stats_struct *stats)
 {
 	int len;

 	len = sprintf(page, "SiByte Bus Watcher statistics\n");
 	len += sprintf(page+len, "-----------------------------\n");
 	len += sprintf(page+len, "L2-d-cor %8ld\nL2-d-bad %8ld\n",
 		       stats->l2_cor_d, stats->l2_bad_d);
 	len += sprintf(page+len, "L2-t-cor %8ld\nL2-t-bad %8ld\n",
 		       stats->l2_cor_t, stats->l2_bad_t);
 	len += sprintf(page+len, "MC-d-cor %8ld\nMC-d-bad %8ld\n",
 		       stats->mem_cor_d, stats->mem_bad_d);
 	len += sprintf(page+len, "IO-err   %8ld\n", stats->bus_error);
 	len += sprintf(page+len, "\nLast recorded signature:\n");
 	len += sprintf(page+len, "Request %02x from %d, answered by %d with Dcode %d\n",
 		       (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f),
 		       (int)(G_SCD_BERR_TID(stats->status) >> 6),
 		       (int)G_SCD_BERR_RID(stats->status),
 		       (int)G_SCD_BERR_DCODE(stats->status));
 	/* XXXKW indicate multiple errors between printings, or stats
            collection (or both)? */
 	if (stats->status & M_SCD_BERR_MULTERRS)
 		len += sprintf(page+len, "Multiple errors observed since last check.\n");
 	if (stats->status_printed) {
 		len += sprintf(page+len, "(no change since last printing)\n");
 	} else {
 		stats->status_printed = 1;
 	}

 	return len;
 }

 #ifdef CONFIG_PROC_FS

 /* For simplicity, I want to assume a single read is required each
    time */
 static int bw_read_proc(char *page, char **start, off_t off,
 			int count, int *eof, void *data)
 {
 	int len;

 	if (off == 0) {
 		len = bw_print_buffer(page, data);
 		*start = page;
 	} else {
 		len = 0;
 		*eof = 1;
 	}
 	return len;
 }

 static void create_proc_decoder(struct bw_stats_struct *stats)
 {
 	struct proc_dir_entry *ent;

 	ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL,
 				     bw_read_proc, stats);
 	if (!ent) {
 		printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n");
 		return;
 	}
 }

 #endif /* CONFIG_PROC_FS */

 /*
  * sibyte_bw_int - handle bus watcher interrupts and accumulate counts
  *
  * notes: possible re-entry due to multiple sources
  *        should check/indicate saturation
  */
 static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs)
 {
 	struct bw_stats_struct *stats = data;
 	unsigned long cntr;
 #ifdef CONFIG_SIBYTE_BW_TRACE
 	int i;
 #endif
 #ifndef CONFIG_PROC_FS
 	char bw_buf[1024];
 #endif

 #ifdef CONFIG_SIBYTE_BW_TRACE
 	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));

 	for (i=0; i<256*6; i++)
 		printk("%016llx\n",
 		       (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));

 	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
 #endif

 	/* Destructive read, clears register and interrupt */
 	stats->status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
 	stats->status_printed = 0;

 	stats->l2_err = cntr = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 	stats->l2_cor_d += G_SCD_L2ECC_CORR_D(cntr);
 	stats->l2_bad_d += G_SCD_L2ECC_BAD_D(cntr);
 	stats->l2_cor_t += G_SCD_L2ECC_CORR_T(cntr);
 	stats->l2_bad_t += G_SCD_L2ECC_BAD_T(cntr);
 	csr_out32(0, IOADDR(A_BUS_L2_ERRORS));

 	stats->memio_err = cntr = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 	stats->mem_cor_d += G_SCD_MEM_ECC_CORR(cntr);
 	stats->mem_bad_d += G_SCD_MEM_ECC_BAD(cntr);
 	stats->bus_error += G_SCD_MEM_BUSERR(cntr);
 	csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS));

 #ifndef CONFIG_PROC_FS
 	bw_print_buffer(bw_buf, stats);
 	printk(bw_buf);
 #endif

 	return IRQ_HANDLED;
 }

 int __init sibyte_bus_watcher(void)
 {
 	memset(&bw_stats, 0, sizeof(struct bw_stats_struct));
 	bw_stats.status_printed = 1;

 	if (request_irq(K_INT_BAD_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
 		printk("Failed to register bus watcher BAD_ECC irq\n");
 		return -1;
 	}
 	if (request_irq(K_INT_COR_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
 		free_irq(K_INT_BAD_ECC, &bw_stats);
 		printk("Failed to register bus watcher COR_ECC irq\n");
 		return -1;
 	}
 	if (request_irq(K_INT_IO_BUS, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
 		free_irq(K_INT_BAD_ECC, &bw_stats);
 		free_irq(K_INT_COR_ECC, &bw_stats);
 		printk("Failed to register bus watcher IO_BUS irq\n");
 		return -1;
 	}

 #ifdef CONFIG_PROC_FS
 	create_proc_decoder(&bw_stats);
 #endif

 #ifdef CONFIG_SIBYTE_BW_TRACE
 	csr_out32((M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
 		   K_SCD_TRSEQ_TRIGGER_ALL),
 		  IOADDR(A_SCD_TRACE_SEQUENCE_0));
 	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
 #endif

 	return 0;
 }

 __initcall(sibyte_bus_watcher);
	/*
	* Copyright (C) 2002,2003 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	/*
	* The Bus Watcher monitors internal bus transactions and maintains
	* counts of transactions with error status, logging details and
	* causing one of several interrupts. This driver provides a handler
	* for those interrupts which aggregates the counts (to avoid
	* saturating the 8-bit counters) and provides a presence in
	* /proc/bus_watcher if PROC_FS is on.
	*/

	#include <linux/config.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/interrupt.h>
	#include <linux/sched.h>
	#include <linux/proc_fs.h>
	#include <asm/system.h>
	#include <asm/io.h>

	#include <asm/sibyte/sb1250.h>
	#include <asm/sibyte/sb1250_regs.h>
	#include <asm/sibyte/sb1250_int.h>
	#include <asm/sibyte/sb1250_scd.h>


	struct bw_stats_struct {
	uint64_t status;
	uint32_t l2_err;
	uint32_t memio_err;
	int status_printed;
	unsigned long l2_cor_d;
	unsigned long l2_bad_d;
	unsigned long l2_cor_t;
	unsigned long l2_bad_t;
	unsigned long mem_cor_d;
	unsigned long mem_bad_d;
	unsigned long bus_error;
	} bw_stats;


	static void print_summary(uint32_t status, uint32_t l2_err,
	uint32_t memio_err)
	{
	printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
	printk("\nLast recorded signature:\n");
	printk("Request %02x from %d, answered by %d with Dcode %d\n",
	(unsigned int)(G_SCD_BERR_TID(status) & 0x3f),
	(int)(G_SCD_BERR_TID(status) >> 6),
	(int)G_SCD_BERR_RID(status),
	(int)G_SCD_BERR_DCODE(status));
	}

	/*
	* check_bus_watcher is exported for use in situations where we want
	* to see the most recent status of the bus watcher, which might have
	* already been destructively read out of the registers.
	*
	* notes: this is currently used by the cache error handler
	* should provide locking against the interrupt handler
	*/
	void check_bus_watcher(void)
	{
	u32 status, l2_err, memio_err;

	#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
	/* Destructive read, clears register and interrupt */
	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
	#else
	/* Use non-destructive register */
	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
	#endif
	if (!(status & 0x7fffffff)) {
	printk("Using last values reaped by bus watcher driver\n");
	status = bw_stats.status;
	l2_err = bw_stats.l2_err;
	memio_err = bw_stats.memio_err;
	} else {
	l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
	memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
	}
	if (status & ~(1UL << 31))
	print_summary(status, l2_err, memio_err);
	else
	printk("Bus watcher indicates no error\n");
	}

	static int bw_print_buffer(char page, struct bw_stats_struct stats)
	{
	int len;

	len = sprintf(page, "SiByte Bus Watcher statistics\n");
	len += sprintf(page+len, "-----------------------------\n");
	len += sprintf(page+len, "L2-d-cor %8ld\nL2-d-bad %8ld\n",
	stats->l2_cor_d, stats->l2_bad_d);
	len += sprintf(page+len, "L2-t-cor %8ld\nL2-t-bad %8ld\n",
	stats->l2_cor_t, stats->l2_bad_t);
	len += sprintf(page+len, "MC-d-cor %8ld\nMC-d-bad %8ld\n",
	stats->mem_cor_d, stats->mem_bad_d);
	len += sprintf(page+len, "IO-err %8ld\n", stats->bus_error);
	len += sprintf(page+len, "\nLast recorded signature:\n");
	len += sprintf(page+len, "Request %02x from %d, answered by %d with Dcode %d\n",
	(unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f),
	(int)(G_SCD_BERR_TID(stats->status) >> 6),
	(int)G_SCD_BERR_RID(stats->status),
	(int)G_SCD_BERR_DCODE(stats->status));
	/* XXXKW indicate multiple errors between printings, or stats
	collection (or both)? */
	if (stats->status & M_SCD_BERR_MULTERRS)
	len += sprintf(page+len, "Multiple errors observed since last check.\n");
	if (stats->status_printed) {
	len += sprintf(page+len, "(no change since last printing)\n");
	} else {
	stats->status_printed = 1;
	}

	return len;
	}

	#ifdef CONFIG_PROC_FS

	/* For simplicity, I want to assume a single read is required each
	time */
	static int bw_read_proc(char page, char *start, off_t off,
	int count, int eof, void data)
	{
	int len;

	if (off == 0) {
	len = bw_print_buffer(page, data);
	*start = page;
	} else {
	len = 0;
	*eof = 1;
	}
	return len;
	}

	static void create_proc_decoder(struct bw_stats_struct *stats)
	{
	struct proc_dir_entry *ent;

	ent = create_proc_read_entry("bus_watcher", S_IWUSR \| S_IRUGO, NULL,
	bw_read_proc, stats);
	if (!ent) {
	printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n");
	return;
	}
	}

	#endif /* CONFIG_PROC_FS */

	/*
	* sibyte_bw_int - handle bus watcher interrupts and accumulate counts
	*
	* notes: possible re-entry due to multiple sources
	* should check/indicate saturation
	*/
	static irqreturn_t sibyte_bw_int(int irq, void data, struct pt_regs regs)
	{
	struct bw_stats_struct *stats = data;
	unsigned long cntr;
	#ifdef CONFIG_SIBYTE_BW_TRACE
	int i;
	#endif
	#ifndef CONFIG_PROC_FS
	char bw_buf[1024];
	#endif

	#ifdef CONFIG_SIBYTE_BW_TRACE
	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
	csr_out32(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));

	for (i=0; i<256*6; i++)
	printk("%016llx\n",
	(unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));

	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
	#endif

	/* Destructive read, clears register and interrupt */
	stats->status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
	stats->status_printed = 0;

	stats->l2_err = cntr = csr_in32(IOADDR(A_BUS_L2_ERRORS));
	stats->l2_cor_d += G_SCD_L2ECC_CORR_D(cntr);
	stats->l2_bad_d += G_SCD_L2ECC_BAD_D(cntr);
	stats->l2_cor_t += G_SCD_L2ECC_CORR_T(cntr);
	stats->l2_bad_t += G_SCD_L2ECC_BAD_T(cntr);
	csr_out32(0, IOADDR(A_BUS_L2_ERRORS));

	stats->memio_err = cntr = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
	stats->mem_cor_d += G_SCD_MEM_ECC_CORR(cntr);
	stats->mem_bad_d += G_SCD_MEM_ECC_BAD(cntr);
	stats->bus_error += G_SCD_MEM_BUSERR(cntr);
	csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS));

	#ifndef CONFIG_PROC_FS
	bw_print_buffer(bw_buf, stats);
	printk(bw_buf);
	#endif

	return IRQ_HANDLED;
	}

	int __init sibyte_bus_watcher(void)
	{
	memset(&bw_stats, 0, sizeof(struct bw_stats_struct));
	bw_stats.status_printed = 1;

	if (request_irq(K_INT_BAD_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
	printk("Failed to register bus watcher BAD_ECC irq\n");
	return -1;
	}
	if (request_irq(K_INT_COR_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
	free_irq(K_INT_BAD_ECC, &bw_stats);
	printk("Failed to register bus watcher COR_ECC irq\n");
	return -1;
	}
	if (request_irq(K_INT_IO_BUS, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
	free_irq(K_INT_BAD_ECC, &bw_stats);
	free_irq(K_INT_COR_ECC, &bw_stats);
	printk("Failed to register bus watcher IO_BUS irq\n");
	return -1;
	}

	#ifdef CONFIG_PROC_FS
	create_proc_decoder(&bw_stats);
	#endif

	#ifdef CONFIG_SIBYTE_BW_TRACE
	csr_out32((M_SCD_TRSEQ_ASAMPLE \| M_SCD_TRSEQ_DSAMPLE \|
	K_SCD_TRSEQ_TRIGGER_ALL),
	IOADDR(A_SCD_TRACE_SEQUENCE_0));
	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
	#endif

	return 0;
	}

	__initcall(sibyte_bus_watcher);