[SCSI] lpfc 8.1.1: Miscellaneous Cleanups
Miscellaneous Cleanups:
- Remove ProgType READ_REV mailbox command value check in lpfc_config_port_prep.
- Convert simple printk to an lpfc_printf_log in queuecommand.
- Modify lpfc_abort_handler message 0749 to display more accurate text and data.
- Minor style cleanup: fix 3 long lines in lpfc_hw.h
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 86c4198..bf0c25f 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -266,9 +266,11 @@
struct {
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t nameType:4; /* FC Word 0, bit 28:31 */
- uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
+ uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit
+ 8:11 of IEEE ext */
#else /* __LITTLE_ENDIAN_BITFIELD */
- uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */
+ uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit
+ 8:11 of IEEE ext */
uint8_t nameType:4; /* FC Word 0, bit 28:31 */
#endif
@@ -278,7 +280,8 @@
#define NAME_IP_TYPE 0x4 /* IP address */
#define NAME_CCITT_TYPE 0xC
#define NAME_CCITT_GR_TYPE 0xE
- uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE extended Lsb */
+ uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE
+ extended Lsb */
uint8_t IEEE[6]; /* FC IEEE address */
} s;
uint8_t wwn[8];
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0749811..3eebe66 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -126,34 +126,26 @@
return -ERESTART;
}
- /* The HBA's current state is provided by the ProgType and rr fields.
- * Read and check the value of these fields before continuing to config
- * this port.
+ /*
+ * The value of rr must be 1 since the driver set the cv field to 1.
+ * This setting requires the FW to set all revision fields.
*/
- if (mb->un.varRdRev.rr == 0 || mb->un.varRdRev.un.b.ProgType != 2) {
- /* Old firmware */
+ if (mb->un.varRdRev.rr == 0) {
vp->rev.rBit = 0;
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_INIT,
- "%d:0440 Adapter failed to init, mbxCmd x%x "
- "READ_REV detected outdated firmware"
- "Data: x%x\n",
- phba->brd_no,
- mb->mbxCommand, 0);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0440 Adapter failed to init, READ_REV has "
+ "missing revision information.\n",
+ phba->brd_no);
mempool_free(pmb, phba->mbox_mem_pool);
return -ERESTART;
- } else {
- vp->rev.rBit = 1;
- vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
- memcpy(vp->rev.sli1FwName,
- (char*)mb->un.varRdRev.sli1FwName, 16);
- vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
- memcpy(vp->rev.sli2FwName,
- (char *)mb->un.varRdRev.sli2FwName, 16);
}
/* Save information as VPD data */
+ vp->rev.rBit = 1;
+ vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
+ memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
+ vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
+ memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
vp->rev.biuRev = mb->un.varRdRev.biuRev;
vp->rev.smRev = mb->un.varRdRev.smRev;
vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c63275e..0aa5ca6 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -721,8 +721,9 @@
}
lpfc_cmd = lpfc_sli_get_scsi_buf (phba);
if (lpfc_cmd == NULL) {
- printk(KERN_WARNING "%s: No buffer available - list empty, "
- "total count %d\n", __FUNCTION__, phba->total_scsi_bufs);
+ lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+ "%d:0707 driver's buffer pool is empty, "
+ "IO busied\n", phba->brd_no);
goto out_host_busy;
}
@@ -844,8 +845,8 @@
out:
lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0749 SCSI layer issued abort device: ret %#x, "
- "ID %d, LUN %d, snum %#lx\n",
+ "%d:0749 SCSI Layer I/O Abort Request "
+ "Status x%x ID %d LUN %d snum %#lx\n",
phba->brd_no, ret, cmnd->device->id,
cmnd->device->lun, cmnd->serial_number);