The ixp2000 driver for the enp2611 was developed on a board with
three gigabit ports, but some enp2611 models only have two ports
(and only one onboard PM3386.) The current driver assumes there
are always three ports and so it doesn't work on the two-port
version of the board at all.
This patch adds a bit of logic to the enp2611 driver to limit the
number of ports to 2 if the second PM3386 isn't detected.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index 6f7dce8..b67f586 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -149,6 +149,8 @@
int status;
dev = nds[i];
+ if (dev == NULL)
+ continue;
status = pm3386_is_link_up(i);
if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@
static int __init enp2611_init_module(void)
{
+ int ports;
int i;
if (!machine_is_enp2611())
@@ -199,7 +202,8 @@
caleb_reset();
pm3386_reset();
- for (i = 0; i < 3; i++) {
+ ports = pm3386_port_count();
+ for (i = 0; i < ports; i++) {
nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
@@ -215,9 +219,10 @@
ixp2400_msf_init(&enp2611_msf_parameters);
- if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
- for (i = 0; i < 3; i++)
- free_netdev(nds[i]);
+ if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+ for (i = 0; i < ports; i++)
+ if (nds[i])
+ free_netdev(nds[i]);
return -EINVAL;
}
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
index 5c7ab75..5224651 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@@ -86,40 +86,53 @@
pm3386_reg_write(port >> 1, reg, value);
}
+int pm3386_secondary_present(void)
+{
+ return pm3386_reg_read(1, 0) == 0x3386;
+}
void pm3386_reset(void)
{
u8 mac[3][6];
+ int secondary;
+
+ secondary = pm3386_secondary_present();
/* Save programmed MAC addresses. */
pm3386_get_mac(0, mac[0]);
pm3386_get_mac(1, mac[1]);
- pm3386_get_mac(2, mac[2]);
+ if (secondary)
+ pm3386_get_mac(2, mac[2]);
/* Assert analog and digital reset. */
pm3386_reg_write(0, 0x002, 0x0060);
- pm3386_reg_write(1, 0x002, 0x0060);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0060);
mdelay(1);
/* Deassert analog reset. */
pm3386_reg_write(0, 0x002, 0x0062);
- pm3386_reg_write(1, 0x002, 0x0062);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0062);
mdelay(10);
/* Deassert digital reset. */
pm3386_reg_write(0, 0x002, 0x0063);
- pm3386_reg_write(1, 0x002, 0x0063);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0063);
mdelay(10);
/* Restore programmed MAC addresses. */
pm3386_set_mac(0, mac[0]);
pm3386_set_mac(1, mac[1]);
- pm3386_set_mac(2, mac[2]);
+ if (secondary)
+ pm3386_set_mac(2, mac[2]);
/* Disable carrier on all ports. */
pm3386_set_carrier(0, 0);
pm3386_set_carrier(1, 0);
- pm3386_set_carrier(2, 0);
+ if (secondary)
+ pm3386_set_carrier(2, 0);
}
static u16 swaph(u16 x)
@@ -127,6 +140,11 @@
return ((x << 8) | (x >> 8)) & 0xffff;
}
+int pm3386_port_count(void)
+{
+ return 2 + pm3386_secondary_present();
+}
+
void pm3386_init_port(int port)
{
int pm = port >> 1;
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
index fe92bb0..cc4183d 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@@ -13,6 +13,7 @@
#define __PM3386_H
void pm3386_reset(void);
+int pm3386_port_count(void);
void pm3386_init_port(int port);
void pm3386_get_mac(int port, u8 *mac);
void pm3386_set_mac(int port, u8 *mac);