Merge branch 'fixes-non-critical' into next/drivers2
fixes-non-critical has already been merged upstream, and there are a
handful of annoying context conflicts that it makes sense to resolve
before sending up. Part of this is because there was parallel development
going on between more urgent fixes and general driver fixups, it should
settle down once the lpc32xx platform reaches a more steady state.
Conflicts:
arch/arm/mach-lpc32xx/clock.c
arch/arm/mach-lpc32xx/common.h
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
new file mode 100644
index 0000000..27dcaab
--- /dev/null
+++ b/Documentation/IRQ-domain.txt
@@ -0,0 +1,117 @@
+irq_domain interrupt number mapping library
+
+The current design of the Linux kernel uses a single large number
+space where each separate IRQ source is assigned a different number.
+This is simple when there is only one interrupt controller, but in
+systems with multiple interrupt controllers the kernel must ensure
+that each one gets assigned non-overlapping allocations of Linux
+IRQ numbers.
+
+The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of
+irq numbers, but they don't provide any support for reverse mapping of
+the controller-local IRQ (hwirq) number into the Linux IRQ number
+space.
+
+The irq_domain library adds mapping between hwirq and IRQ numbers on
+top of the irq_alloc_desc*() API. An irq_domain to manage mapping is
+preferred over interrupt controller drivers open coding their own
+reverse mapping scheme.
+
+irq_domain also implements translation from Device Tree interrupt
+specifiers to hwirq numbers, and can be easily extended to support
+other IRQ topology data sources.
+
+=== irq_domain usage ===
+An interrupt controller driver creates and registers an irq_domain by
+calling one of the irq_domain_add_*() functions (each mapping method
+has a different allocator function, more on that later). The function
+will return a pointer to the irq_domain on success. The caller must
+provide the allocator function with an irq_domain_ops structure with
+the .map callback populated as a minimum.
+
+In most cases, the irq_domain will begin empty without any mappings
+between hwirq and IRQ numbers. Mappings are added to the irq_domain
+by calling irq_create_mapping() which accepts the irq_domain and a
+hwirq number as arguments. If a mapping for the hwirq doesn't already
+exist then it will allocate a new Linux irq_desc, associate it with
+the hwirq, and call the .map() callback so the driver can perform any
+required hardware setup.
+
+When an interrupt is received, irq_find_mapping() function should
+be used to find the Linux IRQ number from the hwirq number.
+
+If the driver has the Linux IRQ number or the irq_data pointer, and
+needs to know the associated hwirq number (such as in the irq_chip
+callbacks) then it can be directly obtained from irq_data->hwirq.
+
+=== Types of irq_domain mappings ===
+There are several mechanisms available for reverse mapping from hwirq
+to Linux irq, and each mechanism uses a different allocation function.
+Which reverse map type should be used depends on the use case. Each
+of the reverse map types are described below:
+
+==== Linear ====
+irq_domain_add_linear()
+
+The linear reverse map maintains a fixed size table indexed by the
+hwirq number. When a hwirq is mapped, an irq_desc is allocated for
+the hwirq, and the IRQ number is stored in the table.
+
+The Linear map is a good choice when the maximum number of hwirqs is
+fixed and a relatively small number (~ < 256). The advantages of this
+map are fixed time lookup for IRQ numbers, and irq_descs are only
+allocated for in-use IRQs. The disadvantage is that the table must be
+as large as the largest possible hwirq number.
+
+The majority of drivers should use the linear map.
+
+==== Tree ====
+irq_domain_add_tree()
+
+The irq_domain maintains a radix tree map from hwirq numbers to Linux
+IRQs. When an hwirq is mapped, an irq_desc is allocated and the
+hwirq is used as the lookup key for the radix tree.
+
+The tree map is a good choice if the hwirq number can be very large
+since it doesn't need to allocate a table as large as the largest
+hwirq number. The disadvantage is that hwirq to IRQ number lookup is
+dependent on how many entries are in the table.
+
+Very few drivers should need this mapping. At the moment, powerpc
+iseries is the only user.
+
+==== No Map ===-
+irq_domain_add_nomap()
+
+The No Map mapping is to be used when the hwirq number is
+programmable in the hardware. In this case it is best to program the
+Linux IRQ number into the hardware itself so that no mapping is
+required. Calling irq_create_direct_mapping() will allocate a Linux
+IRQ number and call the .map() callback so that driver can program the
+Linux IRQ number into the hardware.
+
+Most drivers cannot use this mapping.
+
+==== Legacy ====
+irq_domain_add_legacy()
+irq_domain_add_legacy_isa()
+
+The Legacy mapping is a special case for drivers that already have a
+range of irq_descs allocated for the hwirqs. It is used when the
+driver cannot be immediately converted to use the linear mapping. For
+example, many embedded system board support files use a set of #defines
+for IRQ numbers that are passed to struct device registrations. In that
+case the Linux IRQ numbers cannot be dynamically assigned and the legacy
+mapping should be used.
+
+The legacy map assumes a contiguous range of IRQ numbers has already
+been allocated for the controller and that the IRQ number can be
+calculated by adding a fixed offset to the hwirq number, and
+visa-versa. The disadvantage is that it requires the interrupt
+controller to manage IRQ allocations and it requires an irq_desc to be
+allocated for every hwirq, even if it is unused.
+
+The legacy map should only be used if fixed IRQ mappings must be
+supported. For example, ISA controllers would use the legacy map for
+mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
+numbers.
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
new file mode 100644
index 0000000..6528e21
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -0,0 +1,21 @@
+* Samsung Exynos Power Domains
+
+Exynos processors include support for multiple power domains which are used
+to gate power to one or more peripherals on the processor.
+
+Required Properties:
+- compatiable: should be one of the following.
+ * samsung,exynos4210-pd - for exynos4210 type power domain.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+Optional Properties:
+- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
+ state during boot and remains to be turned-off until explicitly turned-on.
+
+Example:
+
+ lcd0: power-domain-lcd0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x10>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/emc.txt
new file mode 100644
index 0000000..09335f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/emc.txt
@@ -0,0 +1,100 @@
+Embedded Memory Controller
+
+Properties:
+- name : Should be emc
+- #address-cells : Should be 1
+- #size-cells : Should be 0
+- compatible : Should contain "nvidia,tegra20-emc".
+- reg : Offset and length of the register set for the device
+- nvidia,use-ram-code : If present, the sub-nodes will be addressed
+ and chosen using the ramcode board selector. If omitted, only one
+ set of tables can be present and said tables will be used
+ irrespective of ram-code configuration.
+
+Child device nodes describe the memory settings for different configurations and clock rates.
+
+Example:
+
+ emc@7000f400 {
+ #address-cells = < 1 >;
+ #size-cells = < 0 >;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f4000 0x200>;
+ }
+
+
+Embedded Memory Controller ram-code table
+
+If the emc node has the nvidia,use-ram-code property present, then the
+next level of nodes below the emc table are used to specify which settings
+apply for which ram-code settings.
+
+If the emc node lacks the nvidia,use-ram-code property, this level is omitted
+and the tables are stored directly under the emc node (see below).
+
+Properties:
+
+- name : Should be emc-tables
+- nvidia,ram-code : the binary representation of the ram-code board strappings
+ for which this node (and children) are valid.
+
+
+
+Embedded Memory Controller configuration table
+
+This is a table containing the EMC register settings for the various
+operating speeds of the memory controller. They are always located as
+subnodes of the emc controller node.
+
+There are two ways of specifying which tables to use:
+
+* The simplest is if there is just one set of tables in the device tree,
+ and they will always be used (based on which frequency is used).
+ This is the preferred method, especially when firmware can fill in
+ this information based on the specific system information and just
+ pass it on to the kernel.
+
+* The slightly more complex one is when more than one memory configuration
+ might exist on the system. The Tegra20 platform handles this during
+ early boot by selecting one out of possible 4 memory settings based
+ on a 2-pin "ram code" bootstrap setting on the board. The values of
+ these strappings can be read through a register in the SoC, and thus
+ used to select which tables to use.
+
+Properties:
+- name : Should be emc-table
+- compatible : Should contain "nvidia,tegra20-emc-table".
+- reg : either an opaque enumerator to tell different tables apart, or
+ the valid frequency for which the table should be used (in kHz).
+- clock-frequency : the clock frequency for the EMC at which this
+ table should be used (in kHz).
+- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
+ for operation at the 'clock-frequency' setting.
+ The order and contents of the registers are:
+ RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
+ WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
+ PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
+ TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
+ ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
+ ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
+ CFG_CLKTRIM_1, CFG_CLKTRIM_2
+
+ emc-table@166000 {
+ reg = <166000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 166000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
+
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 333000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
new file mode 100644
index 0000000..b5846e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -0,0 +1,19 @@
+NVIDIA Tegra Power Management Controller (PMC)
+
+Properties:
+- name : Should be pmc
+- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- reg : Offset and length of the register set for the device
+- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
+ The PMU is an external Power Management Unit, whose interrupt output
+ signal is fed into the PMC. This signal is optionally inverted, and then
+ fed into the ARM GIC. The PMC is not involved in the detection or
+ handling of this interrupt signal, merely its inversion.
+
+Example:
+
+pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ nvidia,invert-interrupt;
+};
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
new file mode 100644
index 0000000..90fa7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -0,0 +1,30 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..023c952 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -1,8 +1,40 @@
-NVIDIA Tegra 2 GPIO controller
+NVIDIA Tegra GPIO controller
Required properties:
-- compatible : "nvidia,tegra20-gpio"
+- compatible : "nvidia,tegra<chip>-gpio"
+- reg : Physical base address and length of the controller's registers.
+- interrupts : The interrupt outputs from the controller. For Tegra20,
+ there should be 7 interrupts specified, and for Tegra30, there should
+ be 8 interrupts specified.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+- interrupt-controller : Marks the device node as an interrupt controller.
+
+Example:
+
+gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+};
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0ffac0..1bea46a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,17 +510,3 @@
convert to using pci_scan_root_bus() so they can supply a list of
bus resources when the bus is created.
Who: Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What: The CAP9 SoC family will be removed
-When: 3.4
-Files: arch/arm/mach-at91/at91cap9.c
- arch/arm/mach-at91/at91cap9_devices.c
- arch/arm/mach-at91/include/mach/at91cap9.h
- arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- arch/arm/mach-at91/board-cap9adk.c
-Why: The code is not actively maintained and platforms are now hard to find.
-Who: Nicolas Ferre <nicolas.ferre@atmel.com>
- Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 3321d75..24c94d6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3638,6 +3638,15 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
+IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M: Grant Likely <grant.likely@secretlab.ca>
+T: git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next
+S: Maintained
+F: Documentation/IRQ-domain.txt
+F: include/linux/irqdomain.h
+F: kernel/irq/irqdomain.c
+
ISAPNP
M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4bd38cb..3b3de99 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@
select CLKDEV_LOOKUP
help
This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 and AT91CAP9 processors.
+ AT91SAM9 processors.
config ARCH_BCMRING
bool "Broadcom BCMRING"
@@ -754,7 +754,7 @@
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
+ select CLKDEV_LOOKUP
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d..66ca801 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,47 +81,14 @@
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
- config DEBUG_LL_UART_NONE
- bool "No low-level debugging UART"
- help
- Say Y here if your platform doesn't provide a UART option
- below. This relies on your platform choosing the right UART
- definition internally in order for low-level debugging to
- work.
-
- config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- help
- Say Y here if you want the debug print routines to direct
- their output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel and on the XScale with the PEEDI.
-
- Note that the system will appear to hang during boot if there
- is nothing connected to read from the DCC.
-
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+ bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
- config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the 8250 at PCI COM1.
-
- config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port in the DC21285 (Footbridge).
-
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -199,61 +180,12 @@
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART
- bool "i.MX6Q Debug UART"
+ config DEBUG_IMX6Q_UART4
+ bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q.
-
- config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 0 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 1 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 2 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_REALVIEW_STD_PORT
- bool "RealView Default UART"
- depends on ARCH_REALVIEW
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on RealView EB, PB11MP, PBA8
- and PBX platforms.
-
- config DEBUG_REALVIEW_PB1176_PORT
- bool "RealView PB1176 UART"
- depends on MACH_REALVIEW_PB1176
- help
- Say Y here if you want the debug print routines to direct
- their output to the standard serial port on the RealView
- PB1176 platform.
+ on i.MX6Q UART4.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
@@ -292,6 +224,74 @@
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_LL_UART_NONE
+ bool "No low-level debugging UART"
+ help
+ Say Y here if your platform doesn't provide a UART option
+ below. This relies on your platform choosing the right UART
+ definition internally in order for low-level debugging to
+ work.
+
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 80afa1b..6e8447d 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -10,19 +10,25 @@
reg = < 0x00000000 0x40000000 >;
};
+ pmc@7000f400 {
+ nvidia,invert-interrupt;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
- codec: wm8903@1a {
+ wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
- interrupts = < 347 >;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
gpio-controller;
#gpio-cells = <2>;
- /* 0x8000 = Not configured */
- gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
};
};
@@ -38,13 +44,32 @@
clock-frequency = <400000>;
};
- sound {
- compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+ i2s@70002a00 {
+ status = "disable";
+ };
- spkr-en-gpios = <&codec 2 0>;
- hp-det-gpios = <&gpio 178 0>;
- int-mic-en-gpios = <&gpio 184 0>;
- ext-mic-en-gpios = <&gpio 185 0>;
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-harmony",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Harmony";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
serial@70006000 {
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 825d295..e4b552b 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -12,6 +12,13 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ alc5632: alc5632@1e {
+ compatible = "realtek,alc5632";
+ reg = <0x1e>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
i2c@7000c400 {
@@ -37,6 +44,29 @@
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-alc5632-paz00",
+ "nvidia,tegra-audio-alc5632";
+
+ nvidia,model = "Compal PAZ00";
+
+ nvidia,audio-routing =
+ "Int Spk", "SPKOUT",
+ "Int Spk", "SPKOUTN",
+ "Headset Mic", "MICBIAS1",
+ "MIC1", "Headset Mic",
+ "Headset Stereophone", "HPR",
+ "Headset Stereophone", "HPL";
+
+ nvidia,audio-codec = <&alc5632>;
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+
serial@70006000 {
clock-frequency = <216000000>;
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index b55a02e..876d5c9 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -13,6 +13,20 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
@@ -32,6 +46,32 @@
};
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-seaboard",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Seaboard";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1R", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
@@ -93,4 +133,42 @@
gpio-key,wakeup;
};
};
+
+ emc@7000f400 {
+ emc-table@190000 {
+ reg = < 190000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 190000 >;
+ nvidia,emc-registers = < 0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+
+ emc-table@380000 {
+ reg = < 380000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 380000 >;
+ nvidia,emc-registers = < 0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
index 3b3ee7d..2524768 100644
--- a/arch/arm/boot/dts/tegra-trimslice.dts
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -26,6 +26,18 @@
status = "disable";
};
+ i2s@70002800 {
+ status = "disable";
+ };
+
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ das@70000c00 {
+ status = "disable";
+ };
+
serial@70006000 {
clock-frequency = < 216000000 >;
};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index c7d3b87..2dcff87 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -12,6 +12,20 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
@@ -26,6 +40,34 @@
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-ventana",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Ventana";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 3da7afd..ec1f010 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,11 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
@@ -12,6 +17,27 @@
< 0x50040100 0x0100 >;
};
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -44,18 +70,18 @@
interrupts = < 0 53 0x04 >;
};
- i2s@70002800 {
+ tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 0 13 0x04 >;
- dma-channel = < 2 >;
+ nvidia,dma-request-selector = < &apbdma 2 >;
};
- i2s@70002a00 {
+ tegra_i2s2: i2s@70002a00 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = < 0 3 0x04 >;
- dma-channel = < 1 >;
+ nvidia,dma-request-selector = < &apbdma 1 >;
};
das@70000c00 {
@@ -75,6 +101,8 @@
0 89 0x04 >;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
};
pinmux: pinmux@70000000 {
@@ -120,6 +148,13 @@
interrupts = < 0 91 0x04 >;
};
+ emc@7000f400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x200>;
+ };
+
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ee7db98..ac4b75c 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,11 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
@@ -12,6 +17,43 @@
< 0x50040100 0x0100 >;
};
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -55,9 +97,18 @@
gpio: gpio@6000d000 {
compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
- interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04 >;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
};
serial@70006000 {
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index c47d619..f0783be 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -51,7 +51,6 @@
};
struct gic_chip_data {
- unsigned int irq_offset;
union gic_base dist_base;
union gic_base cpu_base;
#ifdef CONFIG_CPU_PM
@@ -61,9 +60,7 @@
u32 __percpu *saved_ppi_enable;
u32 __percpu *saved_ppi_conf;
#endif
-#ifdef CONFIG_IRQ_DOMAIN
- struct irq_domain domain;
-#endif
+ struct irq_domain *domain;
unsigned int gic_irqs;
#ifdef CONFIG_GIC_NON_BANKED
void __iomem *(*get_base)(union gic_base *);
@@ -282,7 +279,7 @@
irqnr = irqstat & ~0x1c00;
if (likely(irqnr > 15 && irqnr < 1021)) {
- irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+ irqnr = irq_find_mapping(gic->domain, irqnr);
handle_IRQ(irqnr, regs);
continue;
}
@@ -314,8 +311,8 @@
if (gic_irq == 1023)
goto out;
- cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
- if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
+ cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
+ if (unlikely(gic_irq < 32 || gic_irq > 1020))
do_bad_IRQ(cascade_irq, desc);
else
generic_handle_irq(cascade_irq);
@@ -348,10 +345,9 @@
static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int i, irq;
+ unsigned int i;
u32 cpumask;
unsigned int gic_irqs = gic->gic_irqs;
- struct irq_domain *domain = &gic->domain;
void __iomem *base = gic_data_dist_base(gic);
u32 cpu = cpu_logical_map(smp_processor_id());
@@ -386,23 +382,6 @@
for (i = 32; i < gic_irqs; i += 32)
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
- /*
- * Setup the Linux IRQ subsystem.
- */
- irq_domain_for_each_irq(domain, i, irq) {
- if (i < 32) {
- irq_set_percpu_devid(irq);
- irq_set_chip_and_handler(irq, &gic_chip,
- handle_percpu_devid_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
- } else {
- irq_set_chip_and_handler(irq, &gic_chip,
- handle_fasteoi_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- irq_set_chip_data(irq, gic);
- }
-
writel_relaxed(1, base + GIC_DIST_CTRL);
}
@@ -618,11 +597,27 @@
}
#endif
-#ifdef CONFIG_OF
-static int gic_irq_domain_dt_translate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type)
+static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ if (hw < 32) {
+ irq_set_percpu_devid(irq);
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_percpu_devid_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
+ } else {
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_fasteoi_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ irq_set_chip_data(irq, d->host_data);
+ return 0;
+}
+
+static int gic_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
{
if (d->of_node != controller)
return -EINVAL;
@@ -639,26 +634,23 @@
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
return 0;
}
-#endif
const struct irq_domain_ops gic_irq_domain_ops = {
-#ifdef CONFIG_OF
- .dt_translate = gic_irq_domain_dt_translate,
-#endif
+ .map = gic_irq_domain_map,
+ .xlate = gic_irq_domain_xlate,
};
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
- u32 percpu_offset)
+ u32 percpu_offset, struct device_node *node)
{
+ irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
- struct irq_domain *domain;
- int gic_irqs;
+ int gic_irqs, irq_base;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
- domain = &gic->domain;
#ifdef CONFIG_GIC_NON_BANKED
if (percpu_offset) { /* Frankein-GIC without banked registers... */
unsigned int cpu;
@@ -694,10 +686,10 @@
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
*/
- domain->hwirq_base = 32;
+ hwirq_base = 32;
if (gic_nr == 0) {
if ((irq_start & 31) > 0) {
- domain->hwirq_base = 16;
+ hwirq_base = 16;
if (irq_start != -1)
irq_start = (irq_start & ~31) + 16;
}
@@ -713,17 +705,17 @@
gic_irqs = 1020;
gic->gic_irqs = gic_irqs;
- domain->nr_irq = gic_irqs - domain->hwirq_base;
- domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq,
- numa_node_id());
- if (IS_ERR_VALUE(domain->irq_base)) {
+ gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
+ irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
irq_start);
- domain->irq_base = irq_start;
+ irq_base = irq_start;
}
- domain->priv = gic;
- domain->ops = &gic_irq_domain_ops;
- irq_domain_add(domain);
+ gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+ hwirq_base, &gic_irq_domain_ops, gic);
+ if (WARN_ON(!gic->domain))
+ return;
gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic);
@@ -768,7 +760,6 @@
void __iomem *dist_base;
u32 percpu_offset;
int irq;
- struct irq_domain *domain = &gic_data[gic_cnt].domain;
if (WARN_ON(!node))
return -ENODEV;
@@ -782,9 +773,7 @@
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
percpu_offset = 0;
- domain->of_node = of_node_get(node);
-
- gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
+ gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
if (parent) {
irq = irq_of_parse_and_map(node, 0);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index dcb004a..7a66311 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -56,7 +56,7 @@
u32 int_enable;
u32 soft_int;
u32 protect;
- struct irq_domain domain;
+ struct irq_domain *domain;
};
/* we cannot allocate memory when VICs are initially registered */
@@ -192,14 +192,8 @@
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
-
- v->domain.irq_base = irq;
- v->domain.nr_irq = 32;
-#ifdef CONFIG_OF_IRQ
- v->domain.of_node = of_node_get(node);
-#endif /* CONFIG_OF */
- v->domain.ops = &irq_domain_simple_ops;
- irq_domain_add(&v->domain);
+ v->domain = irq_domain_add_legacy(node, 32, irq, 0,
+ &irq_domain_simple_ops, v);
}
static void vic_ack_irq(struct irq_data *d)
@@ -348,7 +342,7 @@
vic_register(base, irq_start, 0, node);
}
-static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+void __init __vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources,
struct device_node *node)
{
@@ -444,7 +438,7 @@
stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
while (stat) {
irq = ffs(stat) - 1;
- handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+ handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
stat &= ~(1 << irq);
handled = 1;
}
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb2..0000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index d88fb87..b5ac644 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -45,6 +45,7 @@
CONFIG_FPE_NWFPE_XP=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
+CONFIG_SMSC911X=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -79,6 +80,8 @@
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
CONFIG_DM9000=y
CONFIG_SMC91X=y
CONFIG_SMC911X=y
@@ -116,6 +119,21 @@
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_MEDIA=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_VIDEO_MX2_HOSTSUPPORT=y
+CONFIG_VIDEO_MX2=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a4fb2e..6ae457a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -26,7 +26,6 @@
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
@@ -82,8 +81,9 @@
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
# CONFIG_NET_VENDOR_FARADAY is not set
-CONFIG_FEC=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
@@ -126,7 +126,39 @@
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_MX3_VIDEO=y
+CONFIG_VIDEO_MX3=y
+CONFIG_FB=y
+CONFIG_FB_MX3=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 443675d..a691ef4 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -101,7 +101,7 @@
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_REGULATOR=y
-CONFIG_REGULATOR_BQ24022=y
+CONFIG_REGULATOR_GPIO=y
CONFIG_FB=y
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 4bdfe00..4b1ce6c 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -39,7 +39,7 @@
extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
- u32 offset);
+ u32 offset, struct device_node *);
int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
void gic_handle_irq(struct pt_regs *regs);
@@ -49,7 +49,7 @@
static inline void gic_init(unsigned int nr, int start,
void __iomem *dist , void __iomem *cpu)
{
- gic_init_bases(nr, start, dist, cpu, 0);
+ gic_init_bases(nr, start, dist, cpu, 0, NULL);
}
#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f42ebd6..e14af1a 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -47,6 +47,8 @@
struct device_node;
struct pt_regs;
+void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources,
+ u32 resume_sources, struct device_node *node);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
int vic_of_init(struct device_node *node, struct device_node *parent);
void vic_handle_irq(struct pt_regs *regs);
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc..424aa45 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c..008e7ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@
static volatile int hlt_counter;
-#include <mach/system.h>
-
void disable_hlt(void)
{
hlt_counter++;
@@ -181,13 +179,17 @@
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
- * This is our default idle handler. We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
*/
+
+void (*arm_pm_idle)(void);
+
static void default_idle(void)
{
- if (!need_resched())
- arch_idle();
+ if (arm_pm_idle)
+ arm_pm_idle();
+ else
+ cpu_do_idle();
local_irq_enable();
}
@@ -215,6 +217,10 @@
cpu_die();
#endif
+ /*
+ * We need to disable interrupts here
+ * to ensure we don't miss a wakeup call.
+ */
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
@@ -222,19 +228,18 @@
if (hlt_counter) {
local_irq_enable();
cpu_relax();
- } else {
+ } else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
- * This will eventually be removed - pm_idle
- * functions should always return with IRQs
- * enabled.
+ * pm_idle functions must always
+ * return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
+ } else
local_irq_enable();
- }
}
leds_event(led_idle_end);
rcu_idle_exit();
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00..0284e66 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,15 +102,6 @@
select HAVE_AT91_DBGU1
select AT91_SAM9G45_RESET
-config ARCH_AT91CAP9
- bool "AT91CAP9"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
- select AT91_SAM9G45_RESET
-
config ARCH_AT91X40
bool "AT91x40"
select ARCH_USES_GETTIMEOFFSET
@@ -447,21 +438,6 @@
# ----------------------------------------------------------
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
- bool "Atmel AT91CAP9A-DK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -544,7 +520,7 @@
depends on HAVE_AT91_DBGU0
config AT91_EARLY_DBGU1
- bool "DBGU on 9263, 9g45 and cap9"
+ bool "DBGU on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fb..aeb76f1 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,6 @@
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -81,9 +80,6 @@
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafad..2fd051e 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
- zreladdr-y += 0x70008000
-params_phys-y := 0x70000100
-initrd_phys-y := 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index a42edc2..0000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
- .name = "pioABCD_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
- .name = "mpb0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
- .name = "mpb1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
- .name = "mpb2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
- .name = "mpb3_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
- .name = "mpb4_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
- .name = "can_clk",
- .pmc_mask = 1 << AT91CAP9_ID_CAN,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91CAP9_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
- .name = "aestdes_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91CAP9_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioABCD_clk,
- &mpb0_clk,
- &mpb1_clk,
- &mpb2_clk,
- &mpb3_clk,
- &mpb4_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ac97_clk,
- &tcb_clk,
- &pwm_clk,
- &macb_clk,
- &aestdes_clk,
- &adc_clk,
- &isi_clk,
- &lcdc_clk,
- &dma_clk,
- &udphs_clk,
- &ohci_clk,
- // irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioABCD_clk),
- CLKDEV_CON_ID("pioB", &pioABCD_clk),
- CLKDEV_CON_ID("pioC", &pioABCD_clk),
- CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
- {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOA,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOB,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOC,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOD,
- }
-};
-
-/* --------------------------------------------------------------------
- * AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
- at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
- at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
- at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
- at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
- arm_pm_restart = at91sam9g45_restart;
- at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91cap9_gpio, 4);
-
- /* Remember the silicon revision */
- if (cpu_is_at91cap9_revB())
- system_rev = 0xB;
- else if (cpu_is_at91cap9_revC())
- system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A, B, C and D */
- 0, /* MP Block Peripheral 0 */
- 0, /* MP Block Peripheral 1 */
- 0, /* MP Block Peripheral 2 */
- 0, /* MP Block Peripheral 3 */
- 0, /* MP Block Peripheral 4 */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
- 3, /* CAN */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0, /* Advanced Encryption Standard, Triple DES*/
- 0, /* Analog-to-Digital Converter */
- 0, /* Image Sensor Interface */
- 3, /* LCD Controller */
- 0, /* DMA Controller */
- 2, /* USB Device Port */
- 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
- .map_io = at91cap9_map_io,
- .default_irq_priority = at91cap9_default_irq_priority,
- .ioremap_registers = at91cap9_ioremap_registers,
- .register_clocks = at91cap9_register_clocks,
- .init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7..0000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91CAP9_UHP_BASE,
- .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_UHP,
- .end = AT91CAP9_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i], 0);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91CAP9_UDPHS_FIFO,
- .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_UDPHS,
- .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91CAP9_ID_UDPHS,
- .end = AT91CAP9_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 3, 1, 1),
- EP("ep2", 2, 1024, 3, 1, 1),
- EP("ep3", 3, 1024, 2, 1, 1),
- EP("ep4", 4, 1024, 2, 1, 1),
- EP("ep5", 5, 1024, 2, 1, 0),
- EP("ep6", 6, 1024, 2, 1, 0),
- EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- if (cpu_is_at91cap9_revB()) {
- irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
- AT91_MATRIX_UDPHS_BYPASS_LOCK);
- }
- else
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
- if (data && gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_EMAC,
- .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_EMAC,
- .end = AT91CAP9_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI0,
- .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI0,
- .end = AT91CAP9_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc0_device = {
- .name = "at91_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI1,
- .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI1,
- .end = AT91CAP9_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc1_device = {
- .name = "at91_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- if (mmc_id == 0) { /* MCI0 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
-
- mmc0_data = *data;
- platform_device_register(&at91cap9_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA16, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA17, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA18, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
- at91_set_A_periph(AT91_PIN_PA21, 1);
- }
-
- mmc1_data = *data;
- platform_device_register(&at91cap9_mmc1_device);
- }
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_ECC,
- .end = AT91CAP9_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91cap9_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TWI,
- .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TWI,
- .end = AT91CAP9_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI0,
- .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI0,
- .end = AT91CAP9_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI1,
- .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI1,
- .end = AT91CAP9_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91cap9_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91cap9_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TCB0,
- .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TCB,
- .end = AT91CAP9_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91cap9_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91CAP9_BASE_RTT,
- .end = AT91CAP9_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
- platform_device_register(&at91cap9_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91CAP9_BASE_WDT,
- .end = AT91CAP9_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91cap9_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_PWMC,
- .end = AT91CAP9_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_PWMC,
- .end = AT91CAP9_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_pwm0_device = {
- .name = "atmel_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_mask,
- },
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */
-
- pwm_mask = mask;
-
- platform_device_register(&at91cap9_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_AC97C,
- .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_AC97C,
- .end = AT91CAP9_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ac97_device = {
- .name = "atmel_ac97c",
- .id = 1,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91cap9_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91CAP9_LCDC_BASE,
- .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_LCDC,
- .end = AT91CAP9_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC0,
- .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC0,
- .end = AT91CAP9_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc0_device = {
- .name = "ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC1,
- .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC1,
- .end = AT91CAP9_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc1_device = {
- .name = "ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91CAP9_ID_SSC0:
- pdev = &at91cap9_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91CAP9_ID_SSC1:
- pdev = &at91cap9_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_DBGU,
- .end = AT91CAP9_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US0,
- .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US0,
- .end = AT91CAP9_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US1,
- .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US1,
- .end = AT91CAP9_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US2,
- .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US2,
- .end = AT91CAP9_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91cap9_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91CAP9_ID_US0:
- pdev = &at91cap9_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91CAP9_ID_US1:
- pdev = &at91cap9_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91CAP9_ID_US2:
- pdev = &at91cap9_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91cap9_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174..dd6e2de 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,6 +289,15 @@
}
};
+static void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
@@ -314,6 +323,7 @@
static void __init at91rm9200_initialize(void)
{
+ arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba..9ac8c6f 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -328,8 +329,15 @@
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
+static void at91sam9260_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9260_initialize(void)
{
+ arm_pm_idle = at91sam9260_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff..ab76868 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -286,8 +287,15 @@
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
+static void at91sam9261_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9261_initialize(void)
{
+ arm_pm_idle = at91sam9261_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c..247ab63 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -307,8 +308,15 @@
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
}
+static void at91sam9263_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9263_initialize(void)
{
+ arm_pm_idle = at91sam9263_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 366a776..70709ab 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -891,7 +891,8 @@
.num_resources = ARRAY_SIZE(isi_resources),
};
-void __init at91_add_device_isi(void)
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
{
at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
@@ -904,14 +905,20 @@
at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+
+ /* TODO: register the PCK for ISI_MCK and set its parent */
+ }
}
#else
-void __init at91_add_device_isi(void) {}
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96..5b12192 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,6 +317,12 @@
}
};
+static void at91sam9g45_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@@ -337,6 +343,7 @@
static void __init at91sam9g45_initialize(void)
{
+ arm_pm_idle = at91sam9g45_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 96e2adc..bd4e68c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -14,6 +14,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -28,7 +29,10 @@
#include <mach/at_hdmac.h>
#include <mach/atmel-mci.h>
+#include <media/atmel-isi.h>
+
#include "generic.h"
+#include "clock.h"
/* --------------------------------------------------------------------
@@ -870,6 +874,96 @@
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_ISI,
+ .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_ISI,
+ .end = AT91SAM9G45_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+ .name = "atmel_isi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &isi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &isi_data,
+ },
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+ CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
+{
+ struct clk *pck;
+ struct clk *parent;
+
+ if (!data)
+ return;
+ isi_data = *data;
+
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
+
+ platform_device_register(&at91sam9g45_isi_device);
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
+
+ pck = clk_get(NULL, "pck1");
+ parent = clk_get(NULL, "plla");
+
+ BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+ if (clk_set_parent(pck, parent)) {
+ pr_err("Failed to set PCK's parent\n");
+ } else {
+ /* Register PCK as ISI_MCK */
+ isi_mck_lookups[0].clk = pck;
+ clkdev_add_table(isi_mck_lookups,
+ ARRAY_SIZE(isi_mck_lookups));
+ }
+
+ clk_put(pck);
+ clk_put(parent);
+ }
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
+#endif
+
/* --------------------------------------------------------------------
* LCD Controller
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a8..fd60e22 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -291,8 +292,15 @@
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
+static void at91sam9rl_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9rl_initialize(void)
{
+ arm_pm_idle = at91sam9rl_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd..0154b7f 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
@@ -37,8 +38,19 @@
return AT91X40_MASTER_CLOCK;
}
+static void at91x40_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+ cpu_do_idle();
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
+ arm_pm_idle = at91x40_idle;
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
deleted file mode 100644
index ac3de4f..0000000
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cap9adk.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cap9adk_init_early(void)
-{
- /* Initialize processor: 12 MHz crystal */
- at91_initialize(12000000);
-
- /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
- at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
- /* ... POWER LED always on */
- at91_set_gpio_output(AT91_PIN_PC29, 1);
-
- /* Setup the serial ports and console */
- at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cap9adk_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
- .vbus_pin = AT91_PIN_PB31,
-};
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init cap9adk_add_device_ts(void)
-{
- at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
- at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
-}
-#else
-static void __init cap9adk_add_device_ts(void) {}
-#endif
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info cap9adk_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PC4,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cap9adk_mmc_data = {
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cap9adk_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
- {
- .name = "NAND partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata cap9adk_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = AT91_PIN_PD15,
- .parts = cap9adk_nand_partitions,
- .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 2,
- .ncs_write_setup = 1,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 6,
- .nrd_pulse = 4,
- .ncs_write_pulse = 6,
- .nwe_pulse = 4,
-
- .read_cycle = 8,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 1,
-};
-
-static void __init cap9adk_add_device_nand(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (cap9adk_nand_data.bus_width_16)
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
-
- at91_add_device_nand(&cap9adk_nand_data);
-}
-
-
-/*
- * NOR flash
- */
-static struct mtd_partition cap9adk_nor_partitions[] = {
- {
- .name = "NOR partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data cap9adk_nor_data = {
- .width = 2,
- .parts = cap9adk_nor_partitions,
- .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
-};
-
-#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE SZ_8M
-
-static struct resource nor_flash_resources[] = {
- {
- .start = NOR_BASE,
- .end = NOR_BASE + NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cap9adk_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cap9adk_nor_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
- .ncs_read_setup = 2,
- .nrd_setup = 4,
- .ncs_write_setup = 2,
- .nwe_setup = 4,
-
- .ncs_read_pulse = 10,
- .nrd_pulse = 8,
- .ncs_write_pulse = 10,
- .nwe_pulse = 8,
-
- .read_cycle = 16,
- .write_cycle = 16,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
- .tdf_cycles = 1,
-};
-
-static __init void cap9adk_add_device_nor(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
-
- platform_device_register(&cap9adk_nor_flash);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
- if (on)
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data cap9adk_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-static void __init cap9adk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&cap9adk_usbh_data);
- /* USB HS */
- at91_add_device_usba(&cap9adk_usba_udc_data);
- /* SPI */
- at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
- /* Touchscreen */
- cap9adk_add_device_ts();
- /* MMC */
- at91_add_device_mmc(1, &cap9adk_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&cap9adk_macb_data);
- /* NAND */
- cap9adk_add_device_nand();
- /* NOR Flash */
- cap9adk_add_device_nor();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LCD Controller */
- at91_add_device_lcdc(&cap9adk_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&cap9adk_ac97_data);
-}
-
-MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
- /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = cap9adk_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cap9adk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index eec02cd..1815152 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-at91/board-flexibity.c
*
- * Copyright (C) 2010 Flexibity
+ * Copyright (C) 2010-2011 Flexibity
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
*
@@ -62,6 +62,13 @@
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
+/* I2C devices */
+static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1307", 0x68),
+ },
+};
+
/* SPI devices */
static struct spi_board_info flexibity_spi_devices[] = {
{ /* DataFlash chip */
@@ -141,6 +148,9 @@
at91_add_device_usbh(&flexibity_usbh_data);
/* USB Device */
at91_add_device_udc(&flexibity_udc_data);
+ /* I2C */
+ at91_add_device_i2c(flexibity_i2c_devices,
+ ARRAY_SIZE(flexibity_i2c_devices));
/* SPI */
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ea0d1b9..57497e2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,11 +24,13 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
-#include <linux/clk.h>
#include <linux/atmel-mci.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -185,6 +187,71 @@
/*
+ * ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+ .frate = ISI_CFG1_FRATE_CAPTURE_ALL,
+ /* to use codec and preview path simultaneously */
+ .full_mode = 1,
+ .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+ /* ISI_MCK is provided by programmable clock or external clock */
+ .mck_hz = 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+ /* ISI board for ek using default 8-bits connection */
+ return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+ /* enable or disable the camera */
+ pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+ at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+ if (!on)
+ goto out;
+
+ /* If enabled, give a reset impulse */
+ at91_set_gpio_output(AT91_PIN_PD12, 0);
+ msleep(20);
+ at91_set_gpio_output(AT91_PIN_PD12, 1);
+ msleep(100);
+
+out:
+ return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = i2c_camera_power,
+ .query_bus_param = isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
+};
+#endif
+
+
+/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -377,7 +444,12 @@
#endif
};
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+ &isi_ov2640,
+#endif
+};
static void __init ek_board_init(void)
{
@@ -399,6 +471,8 @@
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
+ /* ISI, using programmable clock as ISI_MCK */
+ at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
@@ -410,6 +484,8 @@
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* Other platform devices */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 61873f3..aa04e22 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,8 +47,7 @@
/*
* Chips have some kind of clocks : group them by functionality
*/
-#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl() \
+#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
@@ -602,8 +601,6 @@
cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 5941334..7e8280e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -45,7 +45,6 @@
extern void __init at91sam9263_set_console_clock(int id);
extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
-extern void __init at91cap9_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
#else
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e..dbdd6ae 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,10 +23,8 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -40,7 +38,7 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
@@ -48,7 +46,7 @@
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
@@ -87,7 +85,7 @@
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
@@ -117,17 +115,15 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
-#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9] */
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
deleted file mode 100644
index 61d9529..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS 0xfff78000
-#define AT91CAP9_BASE_TCB0 0xfff7c000
-#define AT91CAP9_BASE_TC0 0xfff7c000
-#define AT91CAP9_BASE_TC1 0xfff7c040
-#define AT91CAP9_BASE_TC2 0xfff7c080
-#define AT91CAP9_BASE_MCI0 0xfff80000
-#define AT91CAP9_BASE_MCI1 0xfff84000
-#define AT91CAP9_BASE_TWI 0xfff88000
-#define AT91CAP9_BASE_US0 0xfff8c000
-#define AT91CAP9_BASE_US1 0xfff90000
-#define AT91CAP9_BASE_US2 0xfff94000
-#define AT91CAP9_BASE_SSC0 0xfff98000
-#define AT91CAP9_BASE_SSC1 0xfff9c000
-#define AT91CAP9_BASE_AC97C 0xfffa0000
-#define AT91CAP9_BASE_SPI0 0xfffa4000
-#define AT91CAP9_BASE_SPI1 0xfffa8000
-#define AT91CAP9_BASE_CAN 0xfffac000
-#define AT91CAP9_BASE_PWMC 0xfffb8000
-#define AT91CAP9_BASE_EMAC 0xfffbc000
-#define AT91CAP9_BASE_ADC 0xfffc0000
-#define AT91CAP9_BASE_ISI 0xfffc4000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
- (0xfffffd50 - AT91_BASE_SYS) : \
- (0xfffffd60 - AT91_BASE_SYS))
-
-#define AT91CAP9_BASE_ECC 0xffffe200
-#define AT91CAP9_BASE_DMA 0xffffec00
-#define AT91CAP9_BASE_SMC 0xffffe800
-#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1
-#define AT91CAP9_BASE_PIOA 0xfffff200
-#define AT91CAP9_BASE_PIOB 0xfffff400
-#define AT91CAP9_BASE_PIOC 0xfffff600
-#define AT91CAP9_BASE_PIOD 0xfffff800
-#define AT91CAP9_BASE_RSTC 0xfffffd00
-#define AT91CAP9_BASE_SHDWC 0xfffffd10
-#define AT91CAP9_BASE_RTT 0xfffffd20
-#define AT91CAP9_BASE_PIT 0xfffffd30
-#define AT91CAP9_BASE_WDT 0xfffffd40
-
-#define AT91_USART0 AT91CAP9_BASE_US0
-#define AT91_USART1 AT91CAP9_BASE_US1
-#define AT91_USART2 AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
deleted file mode 100644
index 4b9d4af..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
-#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
-#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
-#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index e2f8da8..5d4a9f8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -59,7 +59,6 @@
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
-#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
@@ -76,7 +75,6 @@
#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
-#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -94,11 +92,9 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91CAP9_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
@@ -106,16 +102,10 @@
#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
-#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 3b33f07..dc8d6d4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -107,6 +107,8 @@
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
+ u8 correction_cap; /* PMECC correction capability */
+ u16 sector_size; /* Sector size for PMECC */
struct mtd_partition *parts;
unsigned int num_parts;
};
@@ -179,7 +181,9 @@
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
-extern void __init at91_add_device_isi(void);
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck);
/* Touchscreen Controller */
struct at91_tsadcc_data {
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index f6ce936..0118c33 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,7 +25,6 @@
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
-#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
@@ -51,10 +50,6 @@
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-/* PMC revision */
-#define ARCH_REVISION_CAP9_B 0x399
-#define ARCH_REVISION_CAP9_C 0x601
-
/* RM9200 type */
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
@@ -63,9 +58,6 @@
/* 920T */
AT91_SOC_RM9200,
- /* CAP */
- AT91_SOC_CAP9,
-
/* SAM92xx */
AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
@@ -86,9 +78,6 @@
/* RM9200 */
AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
- /* CAP9 */
- AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
-
/* SAM9260 */
AT91_SOC_SAM9XE,
@@ -195,16 +184,6 @@
#define cpu_is_at91sam9x25() (0)
#endif
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9)
-#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
-#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
-#else
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
-#endif
-
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 2d0e4e9..c213f2862 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,7 +19,7 @@
/* DBGU base */
/* rm9200, 9260/9g20, 9261/9g10, 9rl */
#define AT91_BASE_DBGU0 0xfffff200
-/* 9263, 9g45, cap9 */
+/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
#if defined(CONFIG_ARCH_AT91RM9200)
@@ -34,8 +34,6 @@
#include <mach/at91sam9rl.h>
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3..0000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-#ifdef AT91_PS
- at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Post-RM9200 processors need this in conjunction with the above
- * to save power when idle.
- */
- cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379..87be5aa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -150,11 +150,6 @@
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91cap9()) {
- if ((scsr & AT91CAP9_PMC_UHP) != 0) {
- pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
- }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 7eb40d2..218d816 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -24,24 +24,6 @@
#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
: : "r" (0))
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91sam9_ddrsdr.h>
-
-
-static inline u32 sdram_selfrefresh_enable(void)
-{
- u32 saved_lpr, lpr;
-
- saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
-
- lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
- return saved_lpr;
-}
-
-#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
-#define wait_for_interrupt_enable() cpu_do_idle()
-
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9_ddrsdr.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 92dfb84..f8539a8 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,8 +18,7 @@
#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
@@ -130,8 +129,7 @@
/* Put SDRAM in self-refresh mode */
mov r3, #1
str r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* prepare for DDRAM self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
@@ -263,8 +261,7 @@
#ifdef CONFIG_ARCH_AT91RM9200
/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_DDRSDRC_LPR]
@@ -305,8 +302,7 @@
#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
#else
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 69d3fc4..620c67e 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -86,20 +86,6 @@
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
- case ARCH_ID_AT91CAP9: {
-#ifdef CONFIG_AT91_PMC_UNIT
- u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
-
- if (pmc_ver == ARCH_REVISION_CAP9_B)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
- else if (pmc_ver == ARCH_REVISION_CAP9_C)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
-#endif
- at91_soc_initdata.type = AT91_SOC_CAP9;
- at91_boot_soc = at91cap9_soc;
- break;
- }
-
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
at91_boot_soc = at91rm9200_soc;
@@ -200,7 +186,6 @@
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
- [AT91_SOC_CAP9] = "at91cap9",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
@@ -221,8 +206,6 @@
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
- [AT91_SOC_CAP9_REV_B] = "at91cap9 revB",
- [AT91_SOC_CAP9_REV_C] = "at91cap9 revC",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 4588ae6..5db4aa4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -13,7 +13,6 @@
};
extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91cap9_soc;
extern struct at91_init_soc at91rm9200_soc;
extern struct at91_init_soc at91sam9260_soc;
extern struct at91_init_soc at91sam9261_soc;
@@ -27,10 +26,6 @@
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91CAP9)
-#define at91cap9_soc at91_boot_soc
-#endif
-
#if !defined(CONFIG_ARCH_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e..22e4e0a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
-#define AMBA_DEVICE(name, initname, base, plat, size) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = initname, \
- .platform_data = plat \
- }, \
- .res = { \
- .start = MM_ADDR_IO_##base, \
- .end = MM_ADDR_IO_##base + (size) - 1, \
- .flags = IORESOURCE_MEM \
- }, \
- .dma_mask = ~0, \
- .irq = { \
- IRQ_##base \
- } \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250..0000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b..8736c1a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@
{
soft_restart(0);
}
+
+static void clps711x_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+ arm_pm_idle = clps711x_idle;
+ return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8..0000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/system.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
- clps_writel(1, HALT);
- __asm__ __volatile__(
- "mov r0, r0\n\
- mov r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 275341f..82ed753 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -26,13 +26,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/dm355.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
+#include "davinci.h"
+
/* NOTE: this is geared for the standard config, with a socketed
* 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
* swap chips, maybe with a different block size, partitioning may
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index e99db28..d74a8b3 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -23,13 +23,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/dm355.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
+#include "davinci.h"
+
/* NOTE: this is geared for the standard config, with a socketed
* 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
* swap chips, maybe with a different block size, partitioning may
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 849311d..5bce2b8 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <mach/mux.h>
-#include <mach/dm365.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
@@ -42,6 +41,8 @@
#include <media/tvp514x.h>
+#include "davinci.h"
+
static inline int have_imager(void)
{
/* REVISIT when it's supported, trigger via Kconfig */
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1247ecd..3683306 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -30,7 +30,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
@@ -40,6 +39,8 @@
#include <mach/usb.h>
#include <mach/aemif.h>
+#include "davinci.h"
+
#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
@@ -189,7 +190,7 @@
.num_resources = 0,
};
-static struct tvp514x_platform_data tvp5146_pdata = {
+static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
.vs_polarity = 1
@@ -197,7 +198,7 @@
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
+static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
{
.index = 0,
.name = "Composite",
@@ -217,7 +218,7 @@
* ouput that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
-static struct vpfe_route tvp5146_routes[] = {
+static struct vpfe_route dm644xevm_tvp5146_routes[] = {
{
.input = INPUT_CVBS_VI2B,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
@@ -228,13 +229,13 @@
},
};
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
+static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
{
.name = "tvp5146",
.grp_id = 0,
- .num_inputs = ARRAY_SIZE(tvp5146_inputs),
- .inputs = tvp5146_inputs,
- .routes = tvp5146_routes,
+ .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
+ .inputs = dm644xevm_tvp5146_inputs,
+ .routes = dm644xevm_tvp5146_routes,
.can_route = 1,
.ccdc_if_params = {
.if_type = VPFE_BT656,
@@ -243,15 +244,15 @@
},
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
+ .platform_data = &dm644xevm_tvp5146_pdata,
},
},
};
-static struct vpfe_config vpfe_cfg = {
- .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+static struct vpfe_config dm644xevm_capture_cfg = {
+ .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
.i2c_adapter_id = 1,
- .sub_devs = vpfe_sub_devs,
+ .sub_devs = dm644xevm_vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",
};
@@ -612,6 +613,113 @@
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standard timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
+ {
+ .name = "ntsc",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_525_60},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {11, 10},
+ .fps = {30000, 1001},
+ .left_margin = 0x79,
+ .upper_margin = 0x10,
+ },
+ {
+ .name = "pal",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_625_50},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {54, 59},
+ .fps = {25, 1},
+ .left_margin = 0x7e,
+ .upper_margin = 0x16,
+ },
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+ {
+ .name = "480p59_94",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_480P59_94},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {1, 1},
+ .fps = {5994, 100},
+ .left_margin = 0x80,
+ .upper_margin = 0x20,
+ },
+ {
+ .name = "576p50",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_576P50},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {1, 1},
+ .fps = {50, 1},
+ .left_margin = 0x7e,
+ .upper_margin = 0x30,
+ },
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more
+ * than one output. Userspace applications use index of the array to
+ * set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
+ .modes = dm644xevm_enc_std_timing,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_PRESETS,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "480p59_94",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
+ .modes = dm644xevm_enc_preset_timing,
+ },
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+ .module_name = "dm644x-vpbe-display",
+ .i2c_adapter_id = 1,
+ .osd = {
+ .module_name = VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
+ .outputs = dm644xevm_vpbe_outputs,
+};
+
static struct platform_device *davinci_evm_devices[] __initdata = {
&davinci_fb_device,
&rtc_dev,
@@ -624,8 +732,6 @@
static void __init
davinci_evm_map_io(void)
{
- /* setup input configuration for VPFE input devices */
- dm644x_set_vpfe_config(&vpfe_cfg);
dm644x_init();
}
@@ -697,6 +803,7 @@
evm_init_i2c();
davinci_setup_mmc(0, &dm6446evm_mmc_config);
+ dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_evm_snd_data);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 872ac69..d72ab94 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -36,7 +36,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/dm646x.h>
#include <mach/common.h>
#include <mach/serial.h>
#include <mach/i2c.h>
@@ -45,6 +44,7 @@
#include <mach/cdce949.h>
#include <mach/aemif.h>
+#include "davinci.h"
#include "clock.h"
#define NAND_BLOCK_SIZE SZ_128K
@@ -410,8 +410,6 @@
.bus_delay = 0 /* usec */,
};
-#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38)
-#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
#define VCH2CLK_SYSCLK8 (BIT(9))
#define VCH2CLK_AUXCLK (BIT(9) | BIT(8))
@@ -429,8 +427,6 @@
#define TVP5147_CH0 "tvp514x-0"
#define TVP5147_CH1 "tvp514x-1"
-static void __iomem *vpif_vidclkctl_reg;
-static void __iomem *vpif_vsclkdis_reg;
/* spin lock for updating above registers */
static spinlock_t vpif_reg_lock;
@@ -441,14 +437,14 @@
int val = 0;
int err = 0;
- if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+ if (!cpld_client)
return -ENXIO;
/* disable the clock */
spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(vpif_vsclkdis_reg);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
value |= (VIDCH3CLK | VIDCH2CLK);
- __raw_writel(value, vpif_vsclkdis_reg);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
spin_unlock_irqrestore(&vpif_reg_lock, flags);
val = i2c_smbus_read_byte(cpld_client);
@@ -464,7 +460,7 @@
if (err)
return err;
- value = __raw_readl(vpif_vidclkctl_reg);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
value &= ~(VCH2CLK_MASK);
value &= ~(VCH3CLK_MASK);
@@ -473,13 +469,13 @@
else
value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
- __raw_writel(value, vpif_vidclkctl_reg);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(vpif_vsclkdis_reg);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
/* enable the clock */
value &= ~(VIDCH3CLK | VIDCH2CLK);
- __raw_writel(value, vpif_vsclkdis_reg);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
spin_unlock_irqrestore(&vpif_reg_lock, flags);
return 0;
@@ -564,7 +560,7 @@
int val;
u32 value;
- if (!vpif_vidclkctl_reg || !cpld_client)
+ if (!cpld_client)
return -ENXIO;
val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +568,7 @@
return val;
spin_lock_irqsave(&vpif_reg_lock, flags);
- value = __raw_readl(vpif_vidclkctl_reg);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
if (mux_mode) {
val &= VPIF_INPUT_TWO_CHANNEL;
value |= VIDCH1CLK;
@@ -580,7 +576,7 @@
val |= VPIF_INPUT_ONE_CHANNEL;
value &= ~VIDCH1CLK;
}
- __raw_writel(value, vpif_vidclkctl_reg);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
spin_unlock_irqrestore(&vpif_reg_lock, flags);
err = i2c_smbus_write_byte(cpld_client, val);
@@ -674,12 +670,6 @@
static void __init evm_init_video(void)
{
- vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
- vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
- if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
- pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
- return;
- }
spin_lock_init(&vpif_reg_lock);
dm646x_setup_vpif(&dm646x_vpif_display_config,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 8d34f51..a772bb4 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -30,7 +30,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
@@ -39,6 +38,8 @@
#include <mach/mmc.h>
#include <mach/usb.h>
+#include "davinci.h"
+
#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 31da3c5..76e67509 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -35,13 +35,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include "davinci.h"
+
#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
new file mode 100644
index 0000000..3e519da
--- /dev/null
+++ b/arch/arm/mach-davinci/davinci.h
@@ -0,0 +1,102 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x, DM355, DM365, and DM646x.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ * Copyright (c) 2007 Deep Root Systems, LLC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DAVINCI_H
+#define __DAVINCI_H
+
+#include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <linux/davinci_emac.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/asp.h>
+#include <mach/keyscan.h>
+#include <mach/hardware.h>
+
+#include <media/davinci/vpfe_capture.h>
+#include <media/davinci/vpif_types.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_osd.h>
+
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000
+#define SYSMOD_VIDCLKCTL 0x38
+#define SYSMOD_VPSS_CLKCTL 0x44
+#define SYSMOD_VDD3P3VPWDN 0x48
+#define SYSMOD_VSCLKDIS 0x6c
+#define SYSMOD_PUPDCTL1 0x7c
+
+extern void __iomem *davinci_sysmod_base;
+#define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x))
+void davinci_map_sysmod(void);
+
+/* DM355 base addresses */
+#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+#define ASP1_TX_EVT_EN 1
+#define ASP1_RX_EVT_EN 2
+
+/* DM365 base addresses */
+#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+
+/* DM644x base addresses */
+#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+/* DM646x base addresses */
+#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000
+#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
+
+/* DM355 function declarations */
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_set_vpfe_config(struct vpfe_config *cfg);
+
+/* DM365 function declarations */
+void __init dm365_init(void);
+void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_vc(struct snd_platform_data *pdata);
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void __init dm365_init_rtc(void);
+void dm365_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+void dm365_set_vpfe_config(struct vpfe_config *cfg);
+
+/* DM644x function declarations */
+void __init dm644x_init(void);
+void __init dm644x_init_asp(struct snd_platform_data *pdata);
+int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+
+/* DM646x function declarations */
+void __init dm646x_init(void);
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
+int __init dm646x_init_edma(struct edma_rsv_info *rsv);
+void dm646x_video_init(void);
+void dm646x_setup_vpif(struct vpif_display_config *,
+ struct vpif_capture_config *);
+#endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 50c0156..d2f96662 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,6 +23,7 @@
#include <mach/mmc.h>
#include <mach/time.h>
+#include "davinci.h"
#include "clock.h"
#define DAVINCI_I2C_BASE 0x01C21000
@@ -33,8 +34,19 @@
#define DM365_MMCSD0_BASE 0x01D11000
#define DM365_MMCSD1_BASE 0x01D00000
-/* System control register offsets */
-#define DM64XX_VDD3P3V_PWDN 0x48
+void __iomem *davinci_sysmod_base;
+
+void davinci_map_sysmod(void)
+{
+ davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE,
+ 0x800);
+ /*
+ * Throw a bug since a lot of board initialization code depends
+ * on system module availability. ioremap() failing this early
+ * need careful looking into anyway.
+ */
+ BUG_ON(!davinci_sysmod_base);
+}
static struct resource i2c_resources[] = {
{
@@ -212,12 +224,12 @@
davinci_cfg_reg(DM355_SD1_DATA2);
davinci_cfg_reg(DM355_SD1_DATA3);
} else if (cpu_is_davinci_dm365()) {
- void __iomem *pupdctl1 =
- IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
-
/* Configure pull down control */
- __raw_writel((__raw_readl(pupdctl1) & ~0xfc0),
- pupdctl1);
+ unsigned v;
+
+ v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
+ __raw_writel(v & ~0xfc0,
+ DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
@@ -246,11 +258,9 @@
mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
} else if (cpu_is_davinci_dm644x()) {
/* REVISIT: should this be in board-init code? */
- void __iomem *base =
- IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
-
/* Power-on 3.3V IO cells */
- __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+ __raw_writel(0,
+ DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
/*Set up the pull regiter for MMC */
davinci_cfg_reg(DM644X_MSTK);
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 19667cf..fd3d09a 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -18,7 +18,6 @@
#include <asm/mach/map.h>
-#include <mach/dm355.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
@@ -31,6 +30,7 @@
#include <mach/spi.h>
#include <mach/gpio-davinci.h>
+#include "davinci.h"
#include "clock.h"
#include "mux.h"
@@ -871,6 +871,7 @@
void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
+ davinci_map_sysmod();
}
static int __init dm355_init_devices(void)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f15b435..1a2e953 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -21,7 +21,6 @@
#include <asm/mach/map.h>
-#include <mach/dm365.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
@@ -35,11 +34,28 @@
#include <mach/spi.h>
#include <mach/gpio-davinci.h>
+#include "davinci.h"
#include "clock.h"
#include "mux.h"
#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */
+/* Base of key scan register bank */
+#define DM365_KEYSCAN_BASE 0x01c69400
+
+#define DM365_RTC_BASE 0x01c69000
+
+#define DAVINCI_DM365_VC_BASE 0x01d0c000
+#define DAVINCI_DMA_VC_TX 2
+#define DAVINCI_DMA_VC_RX 3
+
+#define DM365_EMAC_BASE 0x01d07000
+#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000)
+#define DM365_EMAC_CNTRL_OFFSET 0x0000
+#define DM365_EMAC_CNTRL_MOD_OFFSET 0x3000
+#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000
+#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000
+
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -1122,6 +1138,7 @@
void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
+ davinci_map_sysmod();
}
static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 43a48ee..c8b8666 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -15,7 +15,6 @@
#include <asm/mach/map.h>
-#include <mach/dm644x.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@@ -27,6 +26,7 @@
#include <mach/asp.h>
#include <mach/gpio-davinci.h>
+#include "davinci.h"
#include "clock.h"
#include "mux.h"
@@ -35,6 +35,13 @@
*/
#define DM644X_REF_FREQ 27000000
+#define DM644X_EMAC_BASE 0x01c80000
+#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000)
+#define DM644X_EMAC_CNTRL_OFFSET 0x0000
+#define DM644X_EMAC_CNTRL_MOD_OFFSET 0x1000
+#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000
+#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000
+
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -587,13 +594,15 @@
.resource = dm644x_asp_resources,
};
+#define DM644X_VPSS_BASE 0x01c73400
+
static struct resource dm644x_vpss_resources[] = {
{
/* VPSS Base address */
.name = "vpss",
- .start = 0x01c73400,
- .end = 0x01c73400 + 0xff,
- .flags = IORESOURCE_MEM,
+ .start = DM644X_VPSS_BASE,
+ .end = DM644X_VPSS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
},
};
@@ -605,7 +614,7 @@
.resource = dm644x_vpss_resources,
};
-static struct resource vpfe_resources[] = {
+static struct resource dm644x_vpfe_resources[] = {
{
.start = IRQ_VDINT0,
.end = IRQ_VDINT0,
@@ -618,7 +627,7 @@
},
};
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
static struct resource dm644x_ccdc_resource[] = {
/* CCDC Base address */
{
@@ -634,27 +643,149 @@
.num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
.resource = dm644x_ccdc_resource,
.dev = {
- .dma_mask = &vpfe_capture_dma_mask,
+ .dma_mask = &dm644x_video_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
-static struct platform_device vpfe_capture_dev = {
+static struct platform_device dm644x_vpfe_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
- .num_resources = ARRAY_SIZE(vpfe_resources),
- .resource = vpfe_resources,
+ .num_resources = ARRAY_SIZE(dm644x_vpfe_resources),
+ .resource = dm644x_vpfe_resources,
.dev = {
- .dma_mask = &vpfe_capture_dma_mask,
+ .dma_mask = &dm644x_video_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
-void dm644x_set_vpfe_config(struct vpfe_config *cfg)
+#define DM644X_OSD_BASE 0x01c72600
+
+static struct resource dm644x_osd_resources[] = {
+ {
+ .start = DM644X_OSD_BASE,
+ .end = DM644X_OSD_BASE + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct osd_platform_data dm644x_osd_data = {
+ .vpbe_type = VPBE_VERSION_1,
+};
+
+static struct platform_device dm644x_osd_dev = {
+ .name = VPBE_OSD_SUBDEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_osd_resources),
+ .resource = dm644x_osd_resources,
+ .dev = {
+ .dma_mask = &dm644x_video_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dm644x_osd_data,
+ },
+};
+
+#define DM644X_VENC_BASE 0x01c72400
+
+static struct resource dm644x_venc_resources[] = {
+ {
+ .start = DM644X_VENC_BASE,
+ .end = DM644X_VENC_BASE + 0x17f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+#define DM644X_VPSS_MUXSEL_PLL2_MODE BIT(0)
+#define DM644X_VPSS_MUXSEL_VPBECLK_MODE BIT(1)
+#define DM644X_VPSS_VENCLKEN BIT(3)
+#define DM644X_VPSS_DACCLKEN BIT(4)
+
+static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
+ unsigned int mode)
{
- vpfe_capture_dev.dev.platform_data = cfg;
+ int ret = 0;
+ u32 v = DM644X_VPSS_VENCLKEN;
+
+ switch (type) {
+ case VPBE_ENC_STD:
+ v |= DM644X_VPSS_DACCLKEN;
+ writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+ break;
+ case VPBE_ENC_DV_PRESET:
+ switch (mode) {
+ case V4L2_DV_480P59_94:
+ case V4L2_DV_576P50:
+ v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
+ DM644X_VPSS_DACCLKEN;
+ writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+ break;
+ case V4L2_DV_720P60:
+ case V4L2_DV_1080I60:
+ case V4L2_DV_1080P30:
+ /*
+ * For HD, use external clock source since
+ * HD requires higher clock rate
+ */
+ v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
+ writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
}
+static struct resource dm644x_v4l2_disp_resources[] = {
+ {
+ .start = IRQ_VENCINT,
+ .end = IRQ_VENCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_vpbe_display = {
+ .name = "vpbe-v4l2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_v4l2_disp_resources),
+ .resource = dm644x_v4l2_disp_resources,
+ .dev = {
+ .dma_mask = &dm644x_video_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct venc_platform_data dm644x_venc_pdata = {
+ .venc_type = VPBE_VERSION_1,
+ .setup_clock = dm644x_venc_setup_clock,
+};
+
+static struct platform_device dm644x_venc_dev = {
+ .name = VPBE_VENC_SUBDEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm644x_venc_resources),
+ .resource = dm644x_venc_resources,
+ .dev = {
+ .dma_mask = &dm644x_video_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dm644x_venc_pdata,
+ },
+};
+
+static struct platform_device dm644x_vpbe_dev = {
+ .name = "vpbe_controller",
+ .id = -1,
+ .dev = {
+ .dma_mask = &dm644x_video_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
/*----------------------------------------------------------------------*/
static struct map_desc dm644x_io_desc[] = {
@@ -779,6 +910,35 @@
void __init dm644x_init(void)
{
davinci_common_init(&davinci_soc_info_dm644x);
+ davinci_map_sysmod();
+}
+
+int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
+ struct vpbe_config *vpbe_cfg)
+{
+ if (vpfe_cfg || vpbe_cfg)
+ platform_device_register(&dm644x_vpss_device);
+
+ if (vpfe_cfg) {
+ dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
+ platform_device_register(&dm644x_ccdc_dev);
+ platform_device_register(&dm644x_vpfe_dev);
+ /* Add ccdc clock aliases */
+ clk_add_alias("master", dm644x_ccdc_dev.name,
+ "vpss_master", NULL);
+ clk_add_alias("slave", dm644x_ccdc_dev.name,
+ "vpss_slave", NULL);
+ }
+
+ if (vpbe_cfg) {
+ dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
+ platform_device_register(&dm644x_osd_dev);
+ platform_device_register(&dm644x_venc_dev);
+ platform_device_register(&dm644x_vpbe_dev);
+ platform_device_register(&dm644x_vpbe_display);
+ }
+
+ return 0;
}
static int __init dm644x_init_devices(void)
@@ -786,9 +946,6 @@
if (!cpu_is_davinci_dm644x())
return 0;
- /* Add ccdc clock aliases */
- clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
- clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
platform_device_register(&dm644x_edma_device);
platform_device_register(&dm644x_mdio_device);
@@ -796,10 +953,6 @@
clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
NULL, &dm644x_emac_device.dev);
- platform_device_register(&dm644x_vpss_device);
- platform_device_register(&dm644x_ccdc_dev);
- platform_device_register(&vpfe_capture_dev);
-
return 0;
}
postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 00f7743..9eb87c1 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -16,7 +16,6 @@
#include <asm/mach/map.h>
-#include <mach/dm646x.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@@ -28,12 +27,11 @@
#include <mach/asp.h>
#include <mach/gpio-davinci.h>
+#include "davinci.h"
#include "clock.h"
#include "mux.h"
#define DAVINCI_VPIF_BASE (0x01C12000)
-#define VDD3P3V_PWDN_OFFSET (0x48)
-#define VSCLKDIS_OFFSET (0x6C)
#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
BIT_MASK(0))
@@ -46,6 +44,13 @@
#define DM646X_REF_FREQ 27000000
#define DM646X_AUX_FREQ 24000000
+#define DM646X_EMAC_BASE 0x01c80000
+#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
+#define DM646X_EMAC_CNTRL_OFFSET 0x0000
+#define DM646X_EMAC_CNTRL_MOD_OFFSET 0x1000
+#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
+#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
+
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
@@ -873,15 +878,14 @@
struct vpif_capture_config *capture_config)
{
unsigned int value;
- void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
- value = __raw_readl(base + VSCLKDIS_OFFSET);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
value &= ~VSCLKDIS_MASK;
- __raw_writel(value, base + VSCLKDIS_OFFSET);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
- value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+ value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
value &= ~VDD3P3V_VID_MASK;
- __raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+ __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
@@ -905,6 +909,7 @@
void __init dm646x_init(void)
{
davinci_common_init(&davinci_soc_info_dm646x);
+ davinci_map_sysmod();
}
static int __init dm646x_init_devices(void)
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
deleted file mode 100644
index 36dff4a..0000000
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Chip specific defines for DM355 SoC
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DM355_H
-#define __ASM_ARCH_DM355_H
-
-#include <mach/hardware.h>
-#include <mach/asp.h>
-#include <media/davinci/vpfe_capture.h>
-
-#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01E10000
-#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-
-#define ASP1_TX_EVT_EN 1
-#define ASP1_RX_EVT_EN 2
-
-struct spi_board_info;
-
-void __init dm355_init(void);
-void dm355_init_spi0(unsigned chipselect_mask,
- struct spi_board_info *info, unsigned len);
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
-
-#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
deleted file mode 100644
index 2563bf4..0000000
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_DM365_H
-#define __ASM_ARCH_DM665_H
-
-#include <linux/platform_device.h>
-#include <linux/davinci_emac.h>
-#include <mach/hardware.h>
-#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <media/davinci/vpfe_capture.h>
-
-#define DM365_EMAC_BASE (0x01D07000)
-#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET (0x0000)
-#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000)
-#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000)
-#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000)
-
-/* Base of key scan register bank */
-#define DM365_KEYSCAN_BASE (0x01C69400)
-
-#define DM365_RTC_BASE (0x01C69000)
-
-#define DAVINCI_DM365_VC_BASE (0x01D0C000)
-#define DAVINCI_DMA_VC_TX 2
-#define DAVINCI_DMA_VC_RX 3
-
-#define DM365_ASYNC_EMIF_CONTROL_BASE 0x01D10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-
-void __init dm365_init(void);
-void __init dm365_init_asp(struct snd_platform_data *pdata);
-void __init dm365_init_vc(struct snd_platform_data *pdata);
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void __init dm365_init_rtc(void);
-void dm365_init_spi0(unsigned chipselect_mask,
- struct spi_board_info *info, unsigned len);
-
-void dm365_set_vpfe_config(struct vpfe_config *cfg);
-#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
deleted file mode 100644
index 5a1b26d..0000000
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * This file contains the processor specific definitions
- * of the TI DM644x.
- *
- * Copyright (C) 2008 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_DM644X_H
-#define __ASM_ARCH_DM644X_H
-
-#include <linux/davinci_emac.h>
-#include <mach/hardware.h>
-#include <mach/asp.h>
-#include <media/davinci/vpfe_capture.h>
-
-#define DM644X_EMAC_BASE (0x01C80000)
-#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000)
-#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
-#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
-#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
-
-#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000
-#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
-#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
-
-void __init dm644x_init(void);
-void __init dm644x_init_asp(struct snd_platform_data *pdata);
-void dm644x_set_vpfe_config(struct vpfe_config *cfg);
-
-#endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
deleted file mode 100644
index a8ee6c9..0000000
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Chip specific defines for DM646x SoC
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DM646X_H
-#define __ASM_ARCH_DM646X_H
-
-#include <mach/hardware.h>
-#include <mach/asp.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/davinci_emac.h>
-#include <media/davinci/vpif_types.h>
-
-#define DM646X_EMAC_BASE (0x01C80000)
-#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
-#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
-#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
-#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
-
-#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000
-#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
-
-void __init dm646x_init(void);
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int __init dm646x_init_edma(struct edma_rsv_info *rsv);
-
-void dm646x_video_init(void);
-
-void dm646x_setup_vpif(struct vpif_display_config *,
- struct vpif_capture_config *);
-
-#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 414e0b9..0209b1f 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -19,8 +19,6 @@
* and the chip/board init code should then explicitly include
* <chipname>.h
*/
-#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
-
/*
* I/O mapping
*/
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a01..0000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954..0000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad0..804c912 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@
&am79c961_device,
};
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+ const char *irq_stat = (char *)0xff000000;
+
+ /* disable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+ /* wait for an interrupt to occur */
+ while (!*irq_stat);
+
+ /* enable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
static int __init ebsa110_init(void)
{
+ arm_pm_idle = ebsa110_idle;
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65..0000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/system.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 24203f9..903edb0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@
.set_mctrl = ep93xx_uart_set_mctrl,
};
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "apb:uart1",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART1_PHYS_BASE,
- .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART1, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+ { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-static struct amba_device uart2_device = {
- .dev = {
- .init_name = "apb:uart2",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART2_PHYS_BASE,
- .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART2, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+ { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
-static struct amba_device uart3_device = {
- .dev = {
- .init_name = "apb:uart3",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART3_PHYS_BASE,
- .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART3, NO_IRQ },
- .periphid = 0x00041010,
-};
-
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+ { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
static struct resource ep93xx_rtc_resource[] = {
{
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7c..0000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5d602f6..0fe9e5a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -34,6 +34,7 @@
select ARM_CPU_SUSPEND if PM
select S5P_PM if PM
select S5P_SLEEP if PM
+ select PM_GENERIC_DOMAINS
help
Enable EXYNOS4210 CPU support
@@ -41,6 +42,7 @@
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
help
@@ -50,6 +52,7 @@
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4412 SoC support
@@ -74,11 +77,6 @@
help
Common setup code for FIMD0.
-config EXYNOS4_DEV_PD
- bool
- help
- Compile in platform device definitions for Power Domain
-
config EXYNOS4_DEV_SYSMMU
bool
help
@@ -195,7 +193,6 @@
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_DEV_SYSMMU
@@ -243,7 +240,6 @@
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
@@ -277,7 +273,6 @@
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -310,7 +305,6 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_PD
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
@@ -333,6 +327,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_DMA
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5fc202c..9a4c098 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -12,11 +12,13 @@
# Core
-obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o
+obj-$(CONFIG_ARCH_EXYNOS) += common.o
+obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o
@@ -45,7 +47,6 @@
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
new file mode 100644
index 0000000..1bc0b75
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -0,0 +1,1572 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+#include "clock-exynos4.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
+ SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TV),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
+ SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
+ SAVE_ITEM(EXYNOS4_CLKDIV_TV),
+ SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
+ SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
+ SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
+ SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
+ SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
+ SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
+ SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
+};
+#endif
+
+static struct clk exynos4_clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+static struct clk exynos4_clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+static struct clk exynos4_clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
+ .rate = 27000000,
+};
+
+static struct clk exynos4_clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
+}
+
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
+}
+
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
+}
+
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos4_clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &exynos4_clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+struct clksrc_clk exynos4_clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+
+ /* reg_src will be added in each SoCs' clock */
+};
+
+static struct clk *exynos4_clkset_moutcore_list[] = {
+ [0] = &exynos4_clk_mout_apll.clk,
+ [1] = &exynos4_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_moutcore = {
+ .sources = exynos4_clkset_moutcore_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list),
+};
+
+static struct clksrc_clk exynos4_clk_moutcore = {
+ .clk = {
+ .name = "moutcore",
+ },
+ .sources = &exynos4_clkset_moutcore,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_coreclk = {
+ .clk = {
+ .name = "core_clk",
+ .parent = &exynos4_clk_moutcore.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corem0 = {
+ .clk = {
+ .name = "aclk_corem0",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_cores = {
+ .clk = {
+ .name = "aclk_cores",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corem1 = {
+ .clk = {
+ .name = "aclk_corem1",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_periphclk = {
+ .clk = {
+ .name = "periphclk",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+static struct clk *exynos4_clkset_corebus_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+struct clksrc_sources exynos4_clkset_mout_corebus = {
+ .sources = exynos4_clkset_corebus_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_corebus = {
+ .clk = {
+ .name = "mout_corebus",
+ },
+ .sources = &exynos4_clkset_mout_corebus,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_dmc = {
+ .clk = {
+ .name = "sclk_dmc",
+ .parent = &exynos4_clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_cored = {
+ .clk = {
+ .name = "aclk_cored",
+ .parent = &exynos4_clk_sclk_dmc.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corep = {
+ .clk = {
+ .name = "aclk_corep",
+ .parent = &exynos4_clk_aclk_cored.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &exynos4_clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &exynos4_clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos4_clkset_aclk_top_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_aclk = {
+ .sources = exynos4_clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos4_clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_100 = {
+ .clk = {
+ .name = "aclk_100",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_160 = {
+ .clk = {
+ .name = "aclk_160",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+struct clksrc_clk exynos4_clk_aclk_133 = {
+ .clk = {
+ .name = "aclk_133",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *exynos4_clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &exynos4_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos4_clkset_vpllsrc = {
+ .sources = exynos4_clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos4_clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos4_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_vpllsrc,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_sclk_vpll_list[] = {
+ [0] = &exynos4_clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_vpll = {
+ .sources = exynos4_clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &exynos4_clkset_sclk_vpll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static struct clk exynos4_init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1<<24),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "dwmmc",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "adc",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "keypad",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "rtc",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "watchdog",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "usbhost",
+ .enable = exynos4_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "otg",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "fimg2d",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "SYSMMU_MDMA",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "SYSMMU_FIMC0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "SYSMMU_FIMC1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "SYSMMU_FIMC2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "SYSMMU_FIMC3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "SYSMMU_JPEG",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "SYSMMU_FIMD0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_FIMD1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_PCIe",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "SYSMMU_G2D",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "SYSMMU_ROTATOR",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_TV",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_MFC_L",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "SYSMMU_MFC_R",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }
+};
+
+static struct clk exynos4_init_clocks_on[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+static struct clk exynos4_clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
+static struct clk exynos4_clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos4_clk_mdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.2",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)),
+};
+
+struct clk *exynos4_clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_xusbxti,
+ [2] = &exynos4_clk_sclk_hdmi27m,
+ [3] = &exynos4_clk_sclk_usbphy0,
+ [4] = &exynos4_clk_sclk_usbphy1,
+ [5] = &exynos4_clk_sclk_hdmiphy,
+ [6] = &exynos4_clk_mout_mpll.clk,
+ [7] = &exynos4_clk_mout_epll.clk,
+ [8] = &exynos4_clk_sclk_vpll.clk,
+};
+
+struct clksrc_sources exynos4_clkset_group = {
+ .sources = exynos4_clkset_group_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list),
+};
+
+static struct clk *exynos4_clkset_mout_g2d0_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d0 = {
+ .sources = exynos4_clkset_mout_g2d0_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ },
+ .sources = &exynos4_clkset_mout_g2d0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_g2d1_list[] = {
+ [0] = &exynos4_clk_mout_epll.clk,
+ [1] = &exynos4_clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d1 = {
+ .sources = exynos4_clkset_mout_g2d1_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ },
+ .sources = &exynos4_clkset_mout_g2d1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_g2d_list[] = {
+ [0] = &exynos4_clk_mout_g2d0.clk,
+ [1] = &exynos4_clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d = {
+ .sources = exynos4_clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list),
+};
+
+static struct clk *exynos4_clkset_mout_mfc0_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
+ .sources = exynos4_clkset_mout_mfc0_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_mfc0 = {
+ .clk = {
+ .name = "mout_mfc0",
+ },
+ .sources = &exynos4_clkset_mout_mfc0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_mfc1_list[] = {
+ [0] = &exynos4_clk_mout_epll.clk,
+ [1] = &exynos4_clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
+ .sources = exynos4_clkset_mout_mfc1_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_mfc1 = {
+ .clk = {
+ .name = "mout_mfc1",
+ },
+ .sources = &exynos4_clkset_mout_mfc1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_mfc_list[] = {
+ [0] = &exynos4_clk_mout_mfc0.clk,
+ [1] = &exynos4_clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc = {
+ .sources = exynos4_clkset_mout_mfc_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
+};
+
+static struct clk *exynos4_clkset_sclk_dac_list[] = {
+ [0] = &exynos4_clk_sclk_vpll.clk,
+ [1] = &exynos4_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_dac = {
+ .sources = exynos4_clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_sclk_dac,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &exynos4_clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
+ [0] = &exynos4_clk_sclk_pixel.clk,
+ [1] = &exynos4_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
+ .sources = exynos4_clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_sclk_hdmi,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_sclk_mixer_list[] = {
+ [0] = &exynos4_clk_sclk_dac.clk,
+ [1] = &exynos4_clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_mixer = {
+ .sources = exynos4_clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_sclk_mixer,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *exynos4_sclk_tv[] = {
+ &exynos4_clk_sclk_dac,
+ &exynos4_clk_sclk_pixel,
+ &exynos4_clk_sclk_hdmi,
+ &exynos4_clk_sclk_mixer,
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_pwm",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clksrc_mask_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ },
+ .sources = &exynos4_clkset_mout_g2d,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mfc",
+ .devname = "s5p-mfc",
+ },
+ .sources = &exynos4_clkset_mout_mfc,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_dwmmc",
+ .parent = &exynos4_clk_dout_mmc4.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos4_clk_dout_mmc0.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos4_clk_dout_mmc1.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos4_clk_dout_mmc2.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos4_clk_dout_mmc3.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos4_sysclks[] = {
+ &exynos4_clk_mout_apll,
+ &exynos4_clk_sclk_apll,
+ &exynos4_clk_mout_epll,
+ &exynos4_clk_mout_mpll,
+ &exynos4_clk_moutcore,
+ &exynos4_clk_coreclk,
+ &exynos4_clk_armclk,
+ &exynos4_clk_aclk_corem0,
+ &exynos4_clk_aclk_cores,
+ &exynos4_clk_aclk_corem1,
+ &exynos4_clk_periphclk,
+ &exynos4_clk_mout_corebus,
+ &exynos4_clk_sclk_dmc,
+ &exynos4_clk_aclk_cored,
+ &exynos4_clk_aclk_corep,
+ &exynos4_clk_aclk_acp,
+ &exynos4_clk_pclk_acp,
+ &exynos4_clk_vpllsrc,
+ &exynos4_clk_sclk_vpll,
+ &exynos4_clk_aclk_200,
+ &exynos4_clk_aclk_100,
+ &exynos4_clk_aclk_160,
+ &exynos4_clk_aclk_133,
+ &exynos4_clk_dout_mmc0,
+ &exynos4_clk_dout_mmc1,
+ &exynos4_clk_dout_mmc2,
+ &exynos4_clk_dout_mmc3,
+ &exynos4_clk_dout_mmc4,
+ &exynos4_clk_mout_mfc0,
+ &exynos4_clk_mout_mfc1,
+};
+
+static struct clk *exynos4_clk_cdev[] = {
+ &exynos4_clk_pdma0,
+ &exynos4_clk_pdma1,
+ &exynos4_clk_mdma1,
+};
+
+static struct clksrc_clk *exynos4_clksrc_cdev[] = {
+ &exynos4_clk_sclk_uart0,
+ &exynos4_clk_sclk_uart1,
+ &exynos4_clk_sclk_uart2,
+ &exynos4_clk_sclk_uart3,
+ &exynos4_clk_sclk_mmc0,
+ &exynos4_clk_sclk_mmc1,
+ &exynos4_clk_sclk_mmc2,
+ &exynos4_clk_sclk_mmc3,
+ &exynos4_clk_sclk_spi0,
+ &exynos4_clk_sclk_spi1,
+ &exynos4_clk_sclk_spi2,
+
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
+ CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
+};
+
+static int xtal_rate;
+
+static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
+{
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
+ else
+ return 0;
+}
+
+static struct clk_ops exynos4_fout_apll_ops = {
+ .get_rate = exynos4_fout_apll_get_rate,
+};
+
+static u32 exynos4_vpll_div[][8] = {
+ { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
+ { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con0, vpll_con1 = 0;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
+ vpll_con0 &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
+ vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
+ PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
+ PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
+ if (exynos4_vpll_div[i][0] == rate) {
+ vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][7] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(exynos4_vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
+ __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+ .get_rate = exynos4_vpll_get_rate,
+ .set_rate = exynos4_vpll_set_rate,
+};
+
+void __init_or_cpufreq exynos4_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long sclk_dmc;
+ unsigned long aclk_200;
+ unsigned long aclk_100;
+ unsigned long aclk_160;
+ unsigned long aclk_133;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
+ __raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
+
+ vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
+ __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
+ __raw_readl(EXYNOS4_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
+ __raw_readl(EXYNOS4_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
+
+ clk_fout_apll.ops = &exynos4_fout_apll_ops;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &exynos4_vpll_ops;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+ apll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&exynos4_clk_armclk.clk);
+ sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
+
+ aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
+ aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
+ aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
+ aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
+
+ printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+ "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+ armclk, sclk_dmc, aclk_200,
+ aclk_100, aclk_160, aclk_133);
+
+ clk_f.rate = armclk;
+ clk_h.rate = sclk_dmc;
+ clk_p.rate = aclk_100;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
+ s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
+}
+
+static struct clk *exynos4_clks[] __initdata = {
+ &exynos4_clk_sclk_hdmi27m,
+ &exynos4_clk_sclk_hdmiphy,
+ &exynos4_clk_sclk_usbphy0,
+ &exynos4_clk_sclk_usbphy1,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+static struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
+void __init exynos4_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
+ s3c_register_clksrc(exynos4_sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
+ s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
+ s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
+
+ s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
+ s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
+
+ s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
+ s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
+
+ s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
+ s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
+ clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
+
+ register_syscore_ops(&exynos4_clock_syscore_ops);
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
new file mode 100644
index 0000000..cb71c29
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos4.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk exynos4_clk_aclk_133;
+extern struct clksrc_clk exynos4_clk_mout_mpll;
+
+extern struct clksrc_sources exynos4_clkset_mout_corebus;
+extern struct clksrc_sources exynos4_clkset_group;
+
+extern struct clk *exynos4_clkset_aclk_top_list[];
+extern struct clk *exynos4_clkset_group_list[];
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index 13312cc..3b131e4 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/clock-exynos4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4210 - Clock support
@@ -28,20 +26,20 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
#include "common.h"
+#include "clock-exynos4.h"
#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+ SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
+ SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
+ SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
};
#endif
@@ -51,7 +49,7 @@
static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+ return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
}
static struct clksrc_clk clksrcs[] = {
@@ -62,9 +60,9 @@
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 24),
},
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ .sources = &exynos4_clkset_mout_corebus,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_fimd",
@@ -72,9 +70,9 @@
.enable = exynos4_clksrc_mask_lcd1_ctrl,
.ctrlbit = (1 << 0),
},
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
},
};
@@ -82,13 +80,13 @@
{
.name = "sataphy",
.id = -1,
- .parent = &clk_aclk_133.clk,
+ .parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "sata",
.id = -1,
- .parent = &clk_aclk_133.clk,
+ .parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
@@ -117,7 +115,7 @@
#define exynos4210_clock_resume NULL
#endif
-struct syscore_ops exynos4210_clock_syscore_ops = {
+static struct syscore_ops exynos4210_clock_syscore_ops = {
.suspend = exynos4210_clock_suspend,
.resume = exynos4210_clock_resume,
};
@@ -126,9 +124,9 @@
{
int ptr;
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
- clk_mout_mpll.reg_src.shift = 8;
- clk_mout_mpll.reg_src.size = 1;
+ exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
+ exynos4_clk_mout_mpll.reg_src.shift = 8;
+ exynos4_clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 48af285..3ecc01e 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/clock-exynos4212.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4212 - Clock support
@@ -28,22 +26,22 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
#include "common.h"
+#include "clock-exynos4.h"
#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+ SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
+ SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
+ SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
+ SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
};
#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
- [1] = &clk_mout_mpll.clk,
+ [1] = &exynos4_clk_mout_mpll.clk,
};
static struct clksrc_sources clk_src_mpll_user = {
@@ -56,7 +54,7 @@
.name = "mout_mpll_user",
},
.sources = &clk_src_mpll_user,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
};
static struct clksrc_clk *sysclks[] = {
@@ -89,7 +87,7 @@
#define exynos4212_clock_resume NULL
#endif
-struct syscore_ops exynos4212_clock_syscore_ops = {
+static struct syscore_ops exynos4212_clock_syscore_ops = {
.suspend = exynos4212_clock_suspend,
.resume = exynos4212_clock_resume,
};
@@ -99,15 +97,15 @@
int ptr;
/* usbphy1 is removed */
- clkset_group_list[4] = NULL;
+ exynos4_clkset_group_list[4] = NULL;
/* mout_mpll_user is used */
- clkset_group_list[6] = &clk_mout_mpll_user.clk;
- clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+ exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
- clk_mout_mpll.reg_src.shift = 12;
- clk_mout_mpll.reg_src.size = 1;
+ exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
+ exynos4_clk_mout_mpll.reg_src.shift = 12;
+ exynos4_clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
deleted file mode 100644
index 187287a..0000000
--- a/arch/arm/mach-exynos/clock.c
+++ /dev/null
@@ -1,1564 +0,0 @@
-/* linux/arch/arm/mach-exynos4/clock.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/sysmmu.h>
-#include <mach/exynos4-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-};
-#endif
-
-struct clk clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-struct clk clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *clkset_moutcore_list[] = {
- [0] = &clk_mout_apll.clk,
- [1] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_moutcore = {
- .sources = clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(clkset_moutcore_list),
-};
-
-static struct clksrc_clk clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &clkset_moutcore,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &clk_moutcore.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-struct clk *clkset_corebus_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_mout_corebus = {
- .sources = clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(clkset_corebus_list),
-};
-
-static struct clksrc_clk clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &clk_aclk_cored.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &clk_aclk_acp.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *clkset_aclk_top_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_aclk = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
-static struct clksrc_clk clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources clkset_vpllsrc = {
- .sources = clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_vpllsrc,
- .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_vpll_list[] = {
- [0] = &clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources clkset_sclk_vpll = {
- .sources = clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
-};
-
-struct clksrc_clk clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &clkset_sclk_vpll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "dwmmc",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "dac",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "mixer",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "vp",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "hdmiphy",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dacphy",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_dac_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "SYSMMU_MDMA",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "SYSMMU_FIMC0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "SYSMMU_FIMC1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "SYSMMU_FIMC2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "SYSMMU_FIMC3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "SYSMMU_JPEG",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "SYSMMU_FIMD0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_FIMD1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_PCIe",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "SYSMMU_G2D",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "SYSMMU_ROTATOR",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_TV",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_MFC_L",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "SYSMMU_MFC_R",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-struct clk *clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &clk_sclk_hdmi27m,
- [3] = &clk_sclk_usbphy0,
- [4] = &clk_sclk_usbphy1,
- [5] = &clk_sclk_hdmiphy,
- [6] = &clk_mout_mpll.clk,
- [7] = &clk_mout_epll.clk,
- [8] = &clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources clkset_group = {
- .sources = clkset_group_list,
- .nr_sources = ARRAY_SIZE(clkset_group_list),
-};
-
-static struct clk *clkset_mout_g2d0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d0 = {
- .sources = clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
-};
-
-static struct clksrc_clk clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &clkset_mout_g2d0,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d1 = {
- .sources = clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
-};
-
-static struct clksrc_clk clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &clkset_mout_g2d1,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d_list[] = {
- [0] = &clk_mout_g2d0.clk,
- [1] = &clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d = {
- .sources = clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
-};
-
-static struct clk *clkset_mout_mfc0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc0 = {
- .sources = clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &clkset_mout_mfc0,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc1 = {
- .sources = clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &clkset_mout_mfc1,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc_list[] = {
- [0] = &clk_mout_mfc0.clk,
- [1] = &clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc = {
- .sources = clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
-};
-
-static struct clk *clkset_sclk_dac_list[] = {
- [0] = &clk_sclk_vpll.clk,
- [1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_dac = {
- .sources = clkset_sclk_dac_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk clk_sclk_dac = {
- .clk = {
- .name = "sclk_dac",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_sclk_dac,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *clkset_sclk_hdmi_list[] = {
- [0] = &clk_sclk_pixel.clk,
- [1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_hdmi = {
- .sources = clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_sclk_hdmi,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_mixer_list[] = {
- [0] = &clk_sclk_dac.clk,
- [1] = &clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources clkset_sclk_mixer = {
- .sources = clkset_sclk_mixer_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk clk_sclk_mixer = {
- .clk = {
- .name = "sclk_mixer",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_sclk_mixer,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *sclk_tv[] = {
- &clk_sclk_dac,
- &clk_sclk_pixel,
- &clk_sclk_hdmi,
- &clk_sclk_mixer,
-};
-
-static struct clksrc_clk clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &clkset_mout_g2d,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &clkset_mout_mfc,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dwmmc",
- .parent = &clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-static struct clksrc_clk clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc3 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_sclk_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_moutcore,
- &clk_coreclk,
- &clk_armclk,
- &clk_aclk_corem0,
- &clk_aclk_cores,
- &clk_aclk_corem1,
- &clk_periphclk,
- &clk_mout_corebus,
- &clk_sclk_dmc,
- &clk_aclk_cored,
- &clk_aclk_corep,
- &clk_aclk_acp,
- &clk_pclk_acp,
- &clk_vpllsrc,
- &clk_sclk_vpll,
- &clk_aclk_200,
- &clk_aclk_100,
- &clk_aclk_160,
- &clk_aclk_133,
- &clk_dout_mmc0,
- &clk_dout_mmc1,
- &clk_dout_mmc2,
- &clk_dout_mmc3,
- &clk_dout_mmc4,
- &clk_mout_mfc0,
- &clk_mout_mfc1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_pdma0,
- &clk_pdma1,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uart0,
- &clk_sclk_uart1,
- &clk_sclk_uart2,
- &clk_sclk_uart3,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_mmc3,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_spi2,
-
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 vpll_div[][8] = {
- { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
- { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int vpll_con0, vpll_con1 = 0;
- unsigned int i;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- vpll_con0 = __raw_readl(S5P_VPLL_CON0);
- vpll_con0 &= ~(0x1 << 27 | \
- PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- vpll_con1 = __raw_readl(S5P_VPLL_CON1);
- vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
- PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
- PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
- if (vpll_div[i][0] == rate) {
- vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
- vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
- vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
- vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
- vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
- vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
- vpll_con0 |= vpll_div[i][7] << 27;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(vpll_div)) {
- printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- __raw_writel(vpll_con0, S5P_VPLL_CON0);
- __raw_writel(vpll_con1, S5P_VPLL_CON1);
-
- /* Wait for VPLL lock */
- while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
- continue;
-
- clk->rate = rate;
- return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
- .get_rate = exynos4_vpll_get_rate,
- .set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.ops = &exynos4_vpll_ops;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&clk_armclk.clk);
- sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_sclk_hdmi27m,
- &clk_sclk_hdmiphy,
- &clk_sclk_usbphy0,
- &clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
- s3c_register_clksrc(sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
- s3c_disable_clocks(clk_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
- register_syscore_ops(&exynos4_clock_syscore_ops);
- s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index c59e188..85f0e24 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -156,21 +156,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_GPIO1,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO2,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO3,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
- .length = SZ_256,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_DMC0,
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
.length = SZ_4K,
@@ -201,14 +186,6 @@
},
};
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -402,7 +379,7 @@
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
if (!of_have_populated_dt())
- gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+ gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
#ifdef CONFIG_OF
else
of_irq_init(exynos4_dt_irq_match);
@@ -467,10 +444,6 @@
int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
return device_register(&exynos4_dev);
}
@@ -673,7 +646,7 @@
chained_irq_exit(chip, desc);
}
-int __init exynos4_init_irq_eint(void)
+static int __init exynos4_init_irq_eint(void)
{
int irq;
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 1ac49de..8c1efe6 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,12 +15,21 @@
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
void exynos4_setup_clocks(void);
void exynos4210_register_clocks(void);
void exynos4212_register_clocks(void);
+#else
+#define exynos4_register_clocks()
+#define exynos4_setup_clocks()
+
+#define exynos4210_register_clocks()
+#define exynos4212_register_clocks()
+#endif
+
void exynos4_restart(char mode, const char *cmd);
extern struct sys_timer exynos4_timer;
diff --git a/arch/arm/mach-exynos/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c
deleted file mode 100644
index 3273f25..0000000
--- a/arch/arm/mach-exynos/dev-pd.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-pd.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Power Domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <mach/regs-pmu.h>
-
-#include <plat/pd.h>
-
-static int exynos4_pd_enable(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- u32 timeout;
-
- __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
-
- /* Wait max 1ms */
- timeout = 10;
- while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
- != S5P_INT_LOCAL_PWR_EN) {
- if (timeout == 0) {
- printk(KERN_ERR "Power domain %s enable failed.\n",
- dev_name(dev));
- return -ETIMEDOUT;
- }
- timeout--;
- udelay(100);
- }
-
- return 0;
-}
-
-static int exynos4_pd_disable(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- u32 timeout;
-
- __raw_writel(0, pdata->base);
-
- /* Wait max 1ms */
- timeout = 10;
- while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
- if (timeout == 0) {
- printk(KERN_ERR "Power domain %s disable failed.\n",
- dev_name(dev));
- return -ETIMEDOUT;
- }
- timeout--;
- udelay(100);
- }
-
- return 0;
-}
-
-struct platform_device exynos4_device_pd[] = {
- {
- .name = "samsung-pd",
- .id = 0,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_MFC_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 1,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_G3D_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 2,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_LCD0_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 3,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_LCD1_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 4,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_TV_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 5,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_CAM_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 6,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_GPS_CONF,
- },
- },
- },
-};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd2..13607c4 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -29,6 +29,7 @@
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
@@ -36,7 +37,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 exynos4210_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
@@ -69,28 +70,47 @@
DMACH_AC97_PCMOUT,
};
-struct dma_pl330_platdata exynos4_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
+static u8 exynos4212_pdma0_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
+ DMACH_MIPI_HSI0,
+ DMACH_MIPI_HSI1,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_SLIMBUS0_RX,
+ DMACH_SLIMBUS0_TX,
+ DMACH_SLIMBUS2_RX,
+ DMACH_SLIMBUS2_TX,
+ DMACH_SLIMBUS4_RX,
+ DMACH_SLIMBUS4_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_MIPI_HSI4,
+ DMACH_MIPI_HSI5,
};
-struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+struct dma_pl330_platdata exynos4_pdma0_pdata;
-u8 pdma1_peri[] = {
+static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
+ EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
+
+static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
@@ -118,39 +138,94 @@
DMACH_SLIMBUS5_TX,
};
-struct dma_pl330_platdata exynos4_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
+static u8 exynos4212_pdma1_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MIPI_HSI2,
+ DMACH_MIPI_HSI3,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_SLIMBUS1_RX,
+ DMACH_SLIMBUS1_TX,
+ DMACH_SLIMBUS3_RX,
+ DMACH_SLIMBUS3_TX,
+ DMACH_SLIMBUS5_RX,
+ DMACH_SLIMBUS5_TX,
+ DMACH_SLIMBUS0AUX_RX,
+ DMACH_SLIMBUS0AUX_TX,
+ DMACH_SPDIF,
+ DMACH_MIPI_HSI6,
+ DMACH_MIPI_HSI7,
};
-struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
+static struct dma_pl330_platdata exynos4_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
+ EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
+
+static u8 mdma_peri[] = {
+ DMACH_MTOM_0,
+ DMACH_MTOM_1,
+ DMACH_MTOM_2,
+ DMACH_MTOM_3,
+ DMACH_MTOM_4,
+ DMACH_MTOM_5,
+ DMACH_MTOM_6,
+ DMACH_MTOM_7,
};
+static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(mdma_peri),
+ .peri_id = mdma_peri,
+};
+
+static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
+ EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata);
+
static int __init exynos4_dma_init(void)
{
if (of_have_populated_dt())
return 0;
+ if (soc_is_exynos4210()) {
+ exynos4_pdma0_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4210_pdma0_peri);
+ exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+ exynos4_pdma1_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4210_pdma1_peri);
+ exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ exynos4_pdma0_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4212_pdma0_peri);
+ exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+ exynos4_pdma1_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4212_pdma1_peri);
+ exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+ }
+
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+ amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+
+ dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
+ amba_device_register(&exynos4_mdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-exynos/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h
deleted file mode 100644
index a07fcbf..0000000
--- a/arch/arm/mach-exynos/include/mach/exynos4-clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clk clk_sclk_hdmi27m;
-extern struct clk clk_sclk_usbphy0;
-extern struct clk clk_sclk_usbphy1;
-extern struct clk clk_sclk_hdmiphy;
-
-extern struct clksrc_clk clk_sclk_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_aclk_133;
-extern struct clksrc_clk clk_mout_epll;
-extern struct clksrc_clk clk_sclk_vpll;
-
-extern struct clk *clkset_corebus_list[];
-extern struct clksrc_sources clkset_mout_corebus;
-
-extern struct clk *clkset_aclk_top_list[];
-extern struct clksrc_sources clkset_aclk;
-
-extern struct clk *clkset_group_list[];
-extern struct clksrc_sources clkset_group;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
index 80523ca..d7498af 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - GPIO lib support
+ * EXYNOS - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,9 +12,13 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
+/* Macro for EXYNOS GPIO numbering */
-/* GPIO bank sizes */
+#define EXYNOS_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+/* EXYNOS4 GPIO bank sizes */
+
#define EXYNOS4_GPIO_A0_NR (8)
#define EXYNOS4_GPIO_A1_NR (6)
#define EXYNOS4_GPIO_B_NR (8)
@@ -54,52 +57,50 @@
#define EXYNOS4_GPIO_Y6_NR (8)
#define EXYNOS4_GPIO_Z_NR (7)
-/* GPIO bank numbers */
+/* EXYNOS4 GPIO bank numbers */
-#define EXYNOS4_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
+enum exynos4_gpio_number {
EXYNOS4_GPIO_A0_START = 0,
- EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
- EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
- EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
- EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
- EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
- EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
- EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
- EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
- EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
- EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
- EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
- EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
- EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
- EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
- EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
- EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
- EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
- EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
- EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
- EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
- EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
- EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
- EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
- EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
- EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
- EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
- EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
- EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
- EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
- EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
- EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
- EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
- EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
- EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
- EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
- EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
+ EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0),
+ EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1),
+ EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B),
+ EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
+ EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
+ EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
+ EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
+ EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
+ EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
+ EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
+ EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
+ EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
+ EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
+ EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
+ EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
+ EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3),
+ EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0),
+ EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1),
+ EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0),
+ EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1),
+ EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2),
+ EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3),
+ EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0),
+ EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1),
+ EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2),
+ EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0),
+ EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1),
+ EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2),
+ EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3),
+ EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0),
+ EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1),
+ EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2),
+ EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3),
+ EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4),
+ EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5),
+ EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
};
/* EXYNOS4 GPIO number definitions */
+
#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
@@ -139,11 +140,147 @@
#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr))
/* the end of the EXYNOS4 specific gpios */
-#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
-#define S3C_GPIO_END EXYNOS4_GPIO_END
-/* define the number of gpios we need to the one after the GPZ() range */
-#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
+
+/* EXYNOS5 GPIO bank sizes */
+
+#define EXYNOS5_GPIO_A0_NR (8)
+#define EXYNOS5_GPIO_A1_NR (6)
+#define EXYNOS5_GPIO_A2_NR (8)
+#define EXYNOS5_GPIO_B0_NR (5)
+#define EXYNOS5_GPIO_B1_NR (5)
+#define EXYNOS5_GPIO_B2_NR (4)
+#define EXYNOS5_GPIO_B3_NR (4)
+#define EXYNOS5_GPIO_C0_NR (7)
+#define EXYNOS5_GPIO_C1_NR (7)
+#define EXYNOS5_GPIO_C2_NR (7)
+#define EXYNOS5_GPIO_C3_NR (7)
+#define EXYNOS5_GPIO_D0_NR (8)
+#define EXYNOS5_GPIO_D1_NR (8)
+#define EXYNOS5_GPIO_Y0_NR (6)
+#define EXYNOS5_GPIO_Y1_NR (4)
+#define EXYNOS5_GPIO_Y2_NR (6)
+#define EXYNOS5_GPIO_Y3_NR (8)
+#define EXYNOS5_GPIO_Y4_NR (8)
+#define EXYNOS5_GPIO_Y5_NR (8)
+#define EXYNOS5_GPIO_Y6_NR (8)
+#define EXYNOS5_GPIO_X0_NR (8)
+#define EXYNOS5_GPIO_X1_NR (8)
+#define EXYNOS5_GPIO_X2_NR (8)
+#define EXYNOS5_GPIO_X3_NR (8)
+#define EXYNOS5_GPIO_E0_NR (8)
+#define EXYNOS5_GPIO_E1_NR (2)
+#define EXYNOS5_GPIO_F0_NR (4)
+#define EXYNOS5_GPIO_F1_NR (4)
+#define EXYNOS5_GPIO_G0_NR (8)
+#define EXYNOS5_GPIO_G1_NR (8)
+#define EXYNOS5_GPIO_G2_NR (2)
+#define EXYNOS5_GPIO_H0_NR (4)
+#define EXYNOS5_GPIO_H1_NR (8)
+#define EXYNOS5_GPIO_V0_NR (8)
+#define EXYNOS5_GPIO_V1_NR (8)
+#define EXYNOS5_GPIO_V2_NR (8)
+#define EXYNOS5_GPIO_V3_NR (8)
+#define EXYNOS5_GPIO_V4_NR (2)
+#define EXYNOS5_GPIO_Z_NR (7)
+
+/* EXYNOS5 GPIO bank numbers */
+
+enum exynos5_gpio_number {
+ EXYNOS5_GPIO_A0_START = 0,
+ EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0),
+ EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1),
+ EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2),
+ EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0),
+ EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1),
+ EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2),
+ EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3),
+ EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
+ EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
+ EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
+ EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+ EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
+ EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
+ EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
+ EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1),
+ EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2),
+ EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3),
+ EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4),
+ EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5),
+ EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6),
+ EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0),
+ EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1),
+ EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2),
+ EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3),
+ EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0),
+ EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1),
+ EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0),
+ EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1),
+ EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0),
+ EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1),
+ EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2),
+ EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0),
+ EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1),
+ EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0),
+ EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1),
+ EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2),
+ EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3),
+ EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4),
+};
+
+/* EXYNOS5 GPIO number definitions */
+
+#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr))
+#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr))
+#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr))
+#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr))
+#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr))
+#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr))
+#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr))
+#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr))
+#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr))
+#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr))
+#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr))
+#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr))
+#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr))
+#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr))
+#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr))
+#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr))
+#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr))
+#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr))
+#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr))
+#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr))
+#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr))
+#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr))
+#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr))
+#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr))
+#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr))
+#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr))
+#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr))
+#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr))
+#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr))
+#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr))
+#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr))
+#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr))
+#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr))
+#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr))
+#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr))
+#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr))
+#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr))
+#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr))
+
+/* the end of the EXYNOS5 specific gpios */
+
+#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1)
+
+/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */
+
+#define S3C_GPIO_END (EXYNOS5_GPIO_END)
+
+/* define the number of gpios */
+
+#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END)
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index f77bce0..1d401c9 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -43,6 +43,8 @@
#define IRQ_EINT15 IRQ_SPI(31)
#define IRQ_EINT16_31 IRQ_SPI(32)
+#define IRQ_MDMA0 IRQ_SPI(33)
+#define IRQ_MDMA1 IRQ_SPI(34)
#define IRQ_PDMA0 IRQ_SPI(35)
#define IRQ_PDMA1 IRQ_SPI(36)
#define IRQ_TIMER0_VIC IRQ_SPI(37)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c754a22..07c79c9 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -67,7 +67,8 @@
#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_L2CC 0x10502000
-#define EXYNOS4_PA_MDMA 0x10810000
+#define EXYNOS4_PA_MDMA0 0x10810000
+#define EXYNOS4_PA_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
@@ -95,6 +96,10 @@
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
#define EXYNOS4_PA_GPIO3 0x03860000
+#define EXYNOS5_PA_GPIO1 0x11400000
+#define EXYNOS5_PA_GPIO2 0x13400000
+#define EXYNOS5_PA_GPIO3 0x10D10000
+#define EXYNOS5_PA_GPIO4 0x03860000
#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index 6c37ebe..1e4abd6 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -16,195 +16,247 @@
#include <plat/cpu.h>
#include <mach/map.h>
-#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
+#define EXYNOS_CLKREG(x) (S5P_VA_CMU + (x))
-#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500)
-#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600)
-#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800)
+#define EXYNOS4_CLKDIV_LEFTBUS EXYNOS_CLKREG(0x04500)
+#define EXYNOS4_CLKDIV_STAT_LEFTBUS EXYNOS_CLKREG(0x04600)
+#define EXYNOS4_CLKGATE_IP_LEFTBUS EXYNOS_CLKREG(0x04800)
-#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500)
-#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
-#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
+#define EXYNOS4_CLKDIV_RIGHTBUS EXYNOS_CLKREG(0x08500)
+#define EXYNOS4_CLKDIV_STAT_RIGHTBUS EXYNOS_CLKREG(0x08600)
+#define EXYNOS4_CLKGATE_IP_RIGHTBUS EXYNOS_CLKREG(0x08800)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
-#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
+#define EXYNOS4_EPLL_LOCK EXYNOS_CLKREG(0x0C010)
+#define EXYNOS4_VPLL_LOCK EXYNOS_CLKREG(0x0C020)
-#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
-#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
-#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
-#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124)
+#define EXYNOS4_EPLL_CON0 EXYNOS_CLKREG(0x0C110)
+#define EXYNOS4_EPLL_CON1 EXYNOS_CLKREG(0x0C114)
+#define EXYNOS4_VPLL_CON0 EXYNOS_CLKREG(0x0C120)
+#define EXYNOS4_VPLL_CON1 EXYNOS_CLKREG(0x0C124)
-#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
-#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
-#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
-#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
-#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
-#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
-#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
-#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
-#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
-#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
-#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define EXYNOS4_CLKSRC_TOP0 EXYNOS_CLKREG(0x0C210)
+#define EXYNOS4_CLKSRC_TOP1 EXYNOS_CLKREG(0x0C214)
+#define EXYNOS4_CLKSRC_CAM EXYNOS_CLKREG(0x0C220)
+#define EXYNOS4_CLKSRC_TV EXYNOS_CLKREG(0x0C224)
+#define EXYNOS4_CLKSRC_MFC EXYNOS_CLKREG(0x0C228)
+#define EXYNOS4_CLKSRC_G3D EXYNOS_CLKREG(0x0C22C)
+#define EXYNOS4_CLKSRC_IMAGE EXYNOS_CLKREG(0x0C230)
+#define EXYNOS4_CLKSRC_LCD0 EXYNOS_CLKREG(0x0C234)
+#define EXYNOS4_CLKSRC_MAUDIO EXYNOS_CLKREG(0x0C23C)
+#define EXYNOS4_CLKSRC_FSYS EXYNOS_CLKREG(0x0C240)
+#define EXYNOS4_CLKSRC_PERIL0 EXYNOS_CLKREG(0x0C250)
+#define EXYNOS4_CLKSRC_PERIL1 EXYNOS_CLKREG(0x0C254)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+#define EXYNOS4_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x0C310)
+#define EXYNOS4_CLKSRC_MASK_CAM EXYNOS_CLKREG(0x0C320)
+#define EXYNOS4_CLKSRC_MASK_TV EXYNOS_CLKREG(0x0C324)
+#define EXYNOS4_CLKSRC_MASK_LCD0 EXYNOS_CLKREG(0x0C334)
+#define EXYNOS4_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x0C33C)
+#define EXYNOS4_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x0C340)
+#define EXYNOS4_CLKSRC_MASK_PERIL0 EXYNOS_CLKREG(0x0C350)
+#define EXYNOS4_CLKSRC_MASK_PERIL1 EXYNOS_CLKREG(0x0C354)
-#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
-#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
-#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
-#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528)
-#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
-#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
-#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
-#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
-#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
-#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
-#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
-#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
-#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
-#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
-#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
-#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
-#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
-#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
+#define EXYNOS4_CLKDIV_TOP EXYNOS_CLKREG(0x0C510)
+#define EXYNOS4_CLKDIV_CAM EXYNOS_CLKREG(0x0C520)
+#define EXYNOS4_CLKDIV_TV EXYNOS_CLKREG(0x0C524)
+#define EXYNOS4_CLKDIV_MFC EXYNOS_CLKREG(0x0C528)
+#define EXYNOS4_CLKDIV_G3D EXYNOS_CLKREG(0x0C52C)
+#define EXYNOS4_CLKDIV_IMAGE EXYNOS_CLKREG(0x0C530)
+#define EXYNOS4_CLKDIV_LCD0 EXYNOS_CLKREG(0x0C534)
+#define EXYNOS4_CLKDIV_MAUDIO EXYNOS_CLKREG(0x0C53C)
+#define EXYNOS4_CLKDIV_FSYS0 EXYNOS_CLKREG(0x0C540)
+#define EXYNOS4_CLKDIV_FSYS1 EXYNOS_CLKREG(0x0C544)
+#define EXYNOS4_CLKDIV_FSYS2 EXYNOS_CLKREG(0x0C548)
+#define EXYNOS4_CLKDIV_FSYS3 EXYNOS_CLKREG(0x0C54C)
+#define EXYNOS4_CLKDIV_PERIL0 EXYNOS_CLKREG(0x0C550)
+#define EXYNOS4_CLKDIV_PERIL1 EXYNOS_CLKREG(0x0C554)
+#define EXYNOS4_CLKDIV_PERIL2 EXYNOS_CLKREG(0x0C558)
+#define EXYNOS4_CLKDIV_PERIL3 EXYNOS_CLKREG(0x0C55C)
+#define EXYNOS4_CLKDIV_PERIL4 EXYNOS_CLKREG(0x0C560)
+#define EXYNOS4_CLKDIV_PERIL5 EXYNOS_CLKREG(0x0C564)
+#define EXYNOS4_CLKDIV2_RATIO EXYNOS_CLKREG(0x0C580)
-#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
+#define EXYNOS4_CLKDIV_STAT_TOP EXYNOS_CLKREG(0x0C610)
+#define EXYNOS4_CLKDIV_STAT_MFC EXYNOS_CLKREG(0x0C628)
-#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
-#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
-#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
-#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
-#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C930) : \
- S5P_CLKREG(0x04930))
-#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
-#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
-#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
-#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
-#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C960) : \
- S5P_CLKREG(0x08960))
-#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
-#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
-#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
+#define EXYNOS4_CLKGATE_SCLKCAM EXYNOS_CLKREG(0x0C820)
+#define EXYNOS4_CLKGATE_IP_CAM EXYNOS_CLKREG(0x0C920)
+#define EXYNOS4_CLKGATE_IP_TV EXYNOS_CLKREG(0x0C924)
+#define EXYNOS4_CLKGATE_IP_MFC EXYNOS_CLKREG(0x0C928)
+#define EXYNOS4_CLKGATE_IP_G3D EXYNOS_CLKREG(0x0C92C)
+#define EXYNOS4_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x0C930) : \
+ EXYNOS_CLKREG(0x04930))
+#define EXYNOS4210_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x0C930)
+#define EXYNOS4212_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x04930)
+#define EXYNOS4_CLKGATE_IP_LCD0 EXYNOS_CLKREG(0x0C934)
+#define EXYNOS4_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x0C940)
+#define EXYNOS4_CLKGATE_IP_GPS EXYNOS_CLKREG(0x0C94C)
+#define EXYNOS4_CLKGATE_IP_PERIL EXYNOS_CLKREG(0x0C950)
+#define EXYNOS4_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x0C960) : \
+ EXYNOS_CLKREG(0x08960))
+#define EXYNOS4210_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x0C960)
+#define EXYNOS4212_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x08960)
+#define EXYNOS4_CLKGATE_BLOCK EXYNOS_CLKREG(0x0C970)
-#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
-#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200)
-#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500)
-#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504)
-#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600)
-#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
+#define EXYNOS4_CLKSRC_MASK_DMC EXYNOS_CLKREG(0x10300)
+#define EXYNOS4_CLKSRC_DMC EXYNOS_CLKREG(0x10200)
+#define EXYNOS4_CLKDIV_DMC0 EXYNOS_CLKREG(0x10500)
+#define EXYNOS4_CLKDIV_DMC1 EXYNOS_CLKREG(0x10504)
+#define EXYNOS4_CLKDIV_STAT_DMC0 EXYNOS_CLKREG(0x10600)
+#define EXYNOS4_CLKDIV_STAT_DMC1 EXYNOS_CLKREG(0x10604)
+#define EXYNOS4_CLKGATE_IP_DMC EXYNOS_CLKREG(0x10900)
-#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14004) : \
- S5P_CLKREG(0x10008))
-#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
-#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14108) : \
- S5P_CLKREG(0x10108))
-#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x1410C) : \
- S5P_CLKREG(0x1010C))
+#define EXYNOS4_DMC_PAUSE_CTRL EXYNOS_CLKREG(0x11094)
+#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0)
-#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
-#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
+#define EXYNOS4_APLL_LOCK EXYNOS_CLKREG(0x14000)
+#define EXYNOS4_MPLL_LOCK (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x14004) : \
+ EXYNOS_CLKREG(0x10008))
+#define EXYNOS4_APLL_CON0 EXYNOS_CLKREG(0x14100)
+#define EXYNOS4_APLL_CON1 EXYNOS_CLKREG(0x14104)
+#define EXYNOS4_MPLL_CON0 (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x14108) : \
+ EXYNOS_CLKREG(0x10108))
+#define EXYNOS4_MPLL_CON1 (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x1410C) : \
+ EXYNOS_CLKREG(0x1010C))
-#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500)
-#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504)
-#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600)
-#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604)
+#define EXYNOS4_CLKSRC_CPU EXYNOS_CLKREG(0x14200)
+#define EXYNOS4_CLKMUX_STATCPU EXYNOS_CLKREG(0x14400)
-#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
-#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900)
+#define EXYNOS4_CLKDIV_CPU EXYNOS_CLKREG(0x14500)
+#define EXYNOS4_CLKDIV_CPU1 EXYNOS_CLKREG(0x14504)
+#define EXYNOS4_CLKDIV_STATCPU EXYNOS_CLKREG(0x14600)
+#define EXYNOS4_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x14604)
-#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */
+#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800)
+#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900)
-#define S5P_APLLCON0_ENABLE_SHIFT (31)
-#define S5P_APLLCON0_LOCKED_SHIFT (29)
-#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
-#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
+#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */
-#define S5P_EPLLCON0_ENABLE_SHIFT (31)
-#define S5P_EPLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_APLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
+#define EXYNOS4_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
-#define S5P_VPLLCON0_ENABLE_SHIFT (31)
-#define S5P_VPLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_EPLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
-#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
+#define EXYNOS4_VPLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
-#define S5P_CLKDIV_CPU0_CORE_SHIFT (0)
-#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4)
-#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8)
-#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT)
-#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12)
-#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT)
-#define S5P_CLKDIV_CPU0_ATB_SHIFT (16)
-#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT)
-#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
-#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT)
-#define S5P_CLKDIV_CPU0_APLL_SHIFT (24)
-#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
+#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
+#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-#define S5P_CLKDIV_DMC0_ACP_SHIFT (0)
-#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
-#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
-#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8)
-#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT)
-#define S5P_CLKDIV_DMC0_DMC_SHIFT (12)
-#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16)
-#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20)
-#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT)
-#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24)
-#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT)
-#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28)
-#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT (0)
+#define EXYNOS4_CLKDIV_CPU0_CORE_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT (4)
+#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT (8)
+#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT (12)
+#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT (16)
+#define EXYNOS4_CLKDIV_CPU0_ATB_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
+#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT (24)
+#define EXYNOS4_CLKDIV_CPU0_APLL_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT 28
+#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0)
-#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4)
-#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8)
-#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12)
-#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT)
-#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16)
-#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT 0
+#define EXYNOS4_CLKDIV_CPU1_COPY_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT 4
+#define EXYNOS4_CLKDIV_CPU1_HPM_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT 8
+#define EXYNOS4_CLKDIV_CPU1_CORES_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT)
-#define S5P_CLKDIV_BUS_GDLR_SHIFT (0)
-#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
-#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
-#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0)
+#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
+#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8)
+#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12)
+#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16)
+#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20)
+#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24)
+#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28)
+#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
+
+#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0)
+#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4)
+#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8)
+#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12)
+#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16)
+#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24)
+#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
+
+#define EXYNOS4_CLKDIV_MFC_SHIFT (0)
+#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
+
+#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0)
+#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4)
+#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8)
+#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12)
+#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16)
+#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20)
+#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24)
+#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
+
+#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0)
+#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
+#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4)
+#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
+
+#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0)
+#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4)
+#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8)
+#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12)
+#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
/* Only for EXYNOS4210 */
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+#define EXYNOS4210_CLKSRC_LCD1 EXYNOS_CLKREG(0x0C238)
+#define EXYNOS4210_CLKSRC_MASK_LCD1 EXYNOS_CLKREG(0x0C338)
+#define EXYNOS4210_CLKDIV_LCD1 EXYNOS_CLKREG(0x0C538)
+#define EXYNOS4210_CLKGATE_IP_LCD1 EXYNOS_CLKREG(0x0C938)
+
+/* Only for EXYNOS4212 */
+
+#define EXYNOS4_CLKDIV_CAM1 EXYNOS_CLKREG(0x0C568)
+
+#define EXYNOS4_CLKDIV_STAT_CAM1 EXYNOS_CLKREG(0x0C668)
+
+#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
+#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
-#define S5P_EPLL_CON S5P_EPLL_CON0
+#define S5P_EPLL_CON EXYNOS4_EPLL_CON0
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6d..0000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 435261f..7bc296b 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -115,7 +115,7 @@
};
static struct regulator_consumer_supply emmc_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "dw_mmc"),
};
@@ -413,7 +413,7 @@
REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
};
static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+ REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
};
static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
@@ -1263,9 +1263,6 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_CAM],
&s5p_device_fimc_md,
/* NURI Devices */
@@ -1315,14 +1312,6 @@
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
- s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
- s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 0679b8a..b4d032d 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -412,7 +412,7 @@
{ MAX8997_BUCK7, &max8997_buck7_data },
};
-struct max8997_platform_data __initdata origen_max8997_pdata = {
+static struct max8997_platform_data __initdata origen_max8997_pdata = {
.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
.regulators = origen_max8997_regulators,
@@ -621,13 +621,6 @@
&s5p_device_mfc_r,
&s5p_device_mixer,
&exynos4_device_ohci,
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_pd[PD_MFC],
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
};
@@ -695,13 +688,6 @@
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
- s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
- s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
- s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
-
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
}
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index b2c5557..5258b85 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -277,13 +277,6 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
&exynos4_device_spdif,
&exynos4_device_sysmmu,
&samsung_asoc_dma,
@@ -336,10 +329,6 @@
WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-
- /* setup dependencies between TV devices */
- s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
- s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
}
static void __init smdkv310_map_io(void)
@@ -379,7 +368,6 @@
clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(SMDKV310, "SMDKV310")
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 3893995..bc2860b 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -743,7 +743,7 @@
};
static struct regulator_consumer_supply mmc0_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
};
static struct regulator_init_data mmc0_fixed_voltage_init_data = {
@@ -971,7 +971,6 @@
&s3c_device_i2c5,
&s5p_device_i2c_hdmiphy,
&hdmi_fixed_voltage,
- &exynos4_device_pd[PD_TV],
&s5p_device_hdmi,
&s5p_device_sdo,
&s5p_device_mixer,
@@ -984,9 +983,6 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_CAM],
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
@@ -999,16 +995,12 @@
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
-void s5p_tv_setup(void)
+static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-
- /* setup dependencies between TV devices */
- s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
- s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
}
static void __init universal_reserve(void)
@@ -1042,15 +1034,6 @@
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
- s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
- s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
- s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e190130..f105bd2 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -38,29 +38,29 @@
#include <mach/pmu.h>
static struct sleep_save exynos4_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
- { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
- { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
- { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
- { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
- { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
+ { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
+ { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
+ { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
static struct sleep_save exynos4210_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+ { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
};
static struct sleep_save exynos4_epll_save[] = {
- SAVE_ITEM(S5P_EPLL_CON0),
- SAVE_ITEM(S5P_EPLL_CON1),
+ SAVE_ITEM(EXYNOS4_EPLL_CON0),
+ SAVE_ITEM(EXYNOS4_EPLL_CON1),
};
static struct sleep_save exynos4_vpll_save[] = {
- SAVE_ITEM(S5P_VPLL_CON0),
- SAVE_ITEM(S5P_VPLL_CON1),
+ SAVE_ITEM(EXYNOS4_VPLL_CON0),
+ SAVE_ITEM(EXYNOS4_VPLL_CON1),
};
static struct sleep_save exynos4_core_save[] = {
@@ -239,7 +239,7 @@
locktime = (3000 / pll_in_rate) * p_div;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
- __raw_writel(lockcnt, S5P_EPLL_LOCK);
+ __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
s3c_pm_do_restore_core(exynos4_epll_save,
ARRAY_SIZE(exynos4_epll_save));
@@ -257,7 +257,7 @@
locktime = 750;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
- __raw_writel(lockcnt, S5P_VPLL_LOCK);
+ __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
s3c_pm_do_restore_core(exynos4_vpll_save,
ARRAY_SIZE(exynos4_vpll_save));
@@ -268,14 +268,14 @@
do {
if (epll_wait) {
- pll_con = __raw_readl(S5P_EPLL_CON0);
- if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
+ pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
+ if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
epll_wait = 0;
}
if (vpll_wait) {
- pll_con = __raw_readl(S5P_VPLL_CON0);
- if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
+ pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
+ if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
vpll_wait = 0;
}
} while (epll_wait || vpll_wait);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
new file mode 100644
index 0000000..13b3068
--- /dev/null
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -0,0 +1,201 @@
+/*
+ * Exynos Generic power domain support.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Implementation of Exynos specific power domain control which is used in
+ * conjunction with runtime-pm. Support for both device-tree and non-device-tree
+ * based power domain support is included.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+
+#include <mach/regs-pmu.h>
+#include <plat/devs.h>
+
+/*
+ * Exynos specific wrapper around the generic power domain
+ */
+struct exynos_pm_domain {
+ void __iomem *base;
+ char const *name;
+ bool is_off;
+ struct generic_pm_domain pd;
+};
+
+static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+ struct exynos_pm_domain *pd;
+ void __iomem *base;
+ u32 timeout, pwr;
+ char *op;
+
+ pd = container_of(domain, struct exynos_pm_domain, pd);
+ base = pd->base;
+
+ pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+ __raw_writel(pwr, base);
+
+ /* Wait max 1ms */
+ timeout = 10;
+
+ while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) {
+ if (!timeout) {
+ op = (power_on) ? "enable" : "disable";
+ pr_err("Power domain %s %s failed\n", domain->name, op);
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ cpu_relax();
+ usleep_range(80, 100);
+ }
+ return 0;
+}
+
+static int exynos_pd_power_on(struct generic_pm_domain *domain)
+{
+ return exynos_pd_power(domain, true);
+}
+
+static int exynos_pd_power_off(struct generic_pm_domain *domain)
+{
+ return exynos_pd_power(domain, false);
+}
+
+#define EXYNOS_GPD(PD, BASE, NAME) \
+static struct exynos_pm_domain PD = { \
+ .base = (void __iomem *)BASE, \
+ .name = NAME, \
+ .pd = { \
+ .power_off = exynos_pd_power_off, \
+ .power_on = exynos_pd_power_on, \
+ }, \
+}
+
+#ifdef CONFIG_OF
+static __init int exynos_pm_dt_parse_domains(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+ struct exynos_pm_domain *pd;
+
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ pr_err("%s: failed to allocate memory for domain\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
+ pd->is_off = true;
+ pd->name = np->name;
+ pd->base = of_iomap(np, 0);
+ pd->pd.power_off = exynos_pd_power_off;
+ pd->pd.power_on = exynos_pd_power_on;
+ pd->pd.of_node = np;
+ pm_genpd_init(&pd->pd, NULL, false);
+ }
+ return 0;
+}
+#else
+static __init int exynos_pm_dt_parse_domains(void)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+ struct exynos_pm_domain *pd)
+{
+ if (pdev->dev.bus) {
+ if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+ pr_info("%s: error in adding %s device to %s power"
+ "domain\n", __func__, dev_name(&pdev->dev),
+ pd->name);
+ }
+}
+
+EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc");
+EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d");
+EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0");
+EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1");
+EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv");
+EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam");
+EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps");
+
+static struct exynos_pm_domain *exynos4_pm_domains[] = {
+ &exynos4_pd_mfc,
+ &exynos4_pd_g3d,
+ &exynos4_pd_lcd0,
+ &exynos4_pd_lcd1,
+ &exynos4_pd_tv,
+ &exynos4_pd_cam,
+ &exynos4_pd_gps,
+};
+
+static __init int exynos4_pm_init_power_domain(void)
+{
+ int idx;
+
+ if (of_have_populated_dt())
+ return exynos_pm_dt_parse_domains();
+
+ for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
+ pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
+ exynos4_pm_domains[idx]->is_off);
+
+#ifdef CONFIG_S5P_DEV_FIMD0
+ exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
+#endif
+#ifdef CONFIG_S5P_DEV_TV
+ exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv);
+ exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv);
+#endif
+#ifdef CONFIG_S5P_DEV_MFC
+ exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC0
+ exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+ exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+ exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC3
+ exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_CSIS0
+ exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_CSIS1
+ exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_G2D
+ exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0);
+#endif
+#ifdef CONFIG_S5P_DEV_JPEG
+ exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam);
+#endif
+ return 0;
+}
+arch_initcall(exynos4_pm_init_power_domain);
+
+static __init int exynos_pm_late_initcall(void)
+{
+ pm_genpd_poweroff_unused();
+ return 0;
+}
+late_initcall(exynos_pm_late_initcall);
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a58..0000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b9..7355c0b 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o devices.o gpio.o
+obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 0000000..92bbd6b
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should call enable_hlt() in init code, since by default it is
+ * disabled.
+ */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+ arm_pm_idle = gemini_idle;
+ return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f8..a33b5a1 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-static inline void arch_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts here since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should call enable_hlt() in init code, since by default it is
- * disabled.
- */
- local_irq_enable();
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8f..ca70e5f 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@
unsigned int i, mode = 0, level = 0;
/*
- * Disable arch_idle() by default since it is buggy
- * For more info see arch/arm/mach-gemini/include/mach/system.h
+ * Disable the idle handler by default since it is buggy
+ * For more info see arch/arm/mach-gemini/idle.c
*/
disable_hlt();
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6b..e756d1a 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
+
+static void h720x__idle(void)
+{
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+ nop();
+ nop();
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+ nop();
+ nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+ arm_pm_idle = h720x__idle;
+ return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e..0000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4defb97..f7da872 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -304,6 +304,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 2d88f8b..111c328 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -329,6 +329,12 @@
#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+#define BP_CCOSR_CKO1_EN 7
+#define BP_CCOSR_CKO1_PODF 4
+#define BM_CCOSR_CKO1_PODF (0x7 << 4)
+#define BP_CCOSR_CKO1_SEL 0
+#define BM_CCOSR_CKO1_SEL (0xf << 0)
+
#define FREQ_480M 480000000
#define FREQ_528M 528000000
#define FREQ_594M 594000000
@@ -393,6 +399,7 @@
static struct clk ipu2_di0_clk;
static struct clk ipu2_di1_clk;
static struct clk enfc_clk;
+static struct clk cko1_clk;
static struct clk dummy_clk = {};
static unsigned long external_high_reference;
@@ -938,6 +945,24 @@
writel_relaxed(reg, clk->enable_reg);
}
+static int _clk_enable_1b(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg |= 0x1 << clk->enable_shift;
+ writel_relaxed(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable_1b(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg &= ~(0x1 << clk->enable_shift);
+ writel_relaxed(reg, clk->enable_reg);
+}
+
struct divider {
struct clk *clk;
void __iomem *reg;
@@ -983,6 +1008,7 @@
DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
+DEF_CLK_DIV1(cko1_div, &cko1_clk, CCOSR, CKO1);
#define DEF_CLK_DIV2(d, c, r, b) \
static struct divider d = { \
@@ -1038,6 +1064,7 @@
&enfc_div,
&spdif_div,
&asrc_serial_div,
+ &cko1_div,
};
static unsigned long ldb_di_clk_get_rate(struct clk *clk)
@@ -1625,6 +1652,32 @@
DEF_IPU_MUX(1);
DEF_IPU_MUX(2);
+static struct multiplexer cko1_mux = {
+ .clk = &cko1_clk,
+ .reg = CCOSR,
+ .bp = BP_CCOSR_CKO1_SEL,
+ .bm = BM_CCOSR_CKO1_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &pll2_bus,
+ &pll1_sys,
+ &pll5_video,
+ &dummy_clk,
+ &axi_clk,
+ &enfc_clk,
+ &ipu1_di0_clk,
+ &ipu1_di1_clk,
+ &ipu2_di0_clk,
+ &ipu2_di1_clk,
+ &ahb_clk,
+ &ipg_clk,
+ &ipg_perclk,
+ &ckil_clk,
+ &pll4_audio,
+ NULL
+ },
+};
+
static struct multiplexer *multiplexers[] = {
&axi_mux,
&periph_mux,
@@ -1667,6 +1720,7 @@
&ipu2_di1_mux,
&ipu1_mux,
&ipu2_mux,
+ &cko1_mux,
};
static int _clk_set_parent(struct clk *clk, struct clk *parent)
@@ -1690,7 +1744,7 @@
break;
i++;
}
- if (!m->parents[i])
+ if (!m->parents[i] || m->parents[i] == &dummy_clk)
return -EINVAL;
val = readl_relaxed(m->reg);
@@ -1745,6 +1799,20 @@
.secondary = s, \
}
+#define DEF_CLK_1B(name, er, es, p, s) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = _clk_enable_1b, \
+ .disable = _clk_disable_1b, \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
@@ -1811,6 +1879,7 @@
DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
+DEF_CLK_1B(cko1_clk, CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
static int pcie_clk_enable(struct clk *clk)
{
@@ -1922,6 +1991,7 @@
_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+ _REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
};
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
@@ -2029,6 +2099,8 @@
clk_set_rate(&usdhc3_clk, 49500000);
clk_set_rate(&usdhc4_clk, 49500000);
+ clk_set_parent(&cko1_clk, &ahb_clk);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index e6bad17..1e03ef4 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -47,7 +47,7 @@
static int __init imx51_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- irq_domain_add_simple(np, 0);
+ irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@@ -57,7 +57,7 @@
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
- irq_domain_add_simple(np, gpio_irq_base);
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 05ebb3e..fd5be0f 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -51,7 +51,7 @@
static int __init imx53_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- irq_domain_add_simple(np, 0);
+ irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@@ -61,7 +61,7 @@
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
- irq_domain_add_simple(np, gpio_irq_base);
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index d4ab6f2..0213f8d 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,7 +17,7 @@
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
+#ifdef CONFIG_DEBUG_IMX6Q_UART4
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
.length = MX6Q_UART4_SIZE,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index c257281..6075d4d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -97,7 +97,8 @@
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
- irq_domain_add_simple(np, gpio_irq_base);
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+ NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 8d9f955..e432d4a 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -37,8 +37,8 @@
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,6 +159,18 @@
.resource = &mx21ads_flash_resource,
};
+static const struct resource mx21ads_cs8900_resources[] __initconst = {
+ DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+ DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+};
+
+static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
+ .name = "cs89x0",
+ .id = 0,
+ .res = mx21ads_cs8900_resources,
+ .num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
+};
+
static const struct imxuart_platform_data uart_pdata_rts __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -292,6 +304,8 @@
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ platform_device_register_full(
+ (struct platform_device_info *)&mx21ads_cs8900_devinfo);
}
static void __init mx21ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 18f3581..c6d385c 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -31,6 +31,8 @@
#include <linux/regulator/machine.h>
#include <linux/spi/l4f00242t03.h>
+#include <media/soc_camera.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -52,6 +54,8 @@
#define SD1_CD IMX_GPIO_NR(2, 26)
#define LCD_RESET IMX_GPIO_NR(1, 3)
#define LCD_ENABLE IMX_GPIO_NR(1, 31)
+#define CSI_PWRDWN IMX_GPIO_NR(4, 19)
+#define CSI_RESET IMX_GPIO_NR(3, 6)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
@@ -141,6 +145,26 @@
PA30_PF_CONTRAST,
LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
LCD_RESET | GPIO_GPIO | GPIO_OUT,
+ /* CSI */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
+ CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
+ CSI_RESET | GPIO_GPIO | GPIO_OUT,
+};
+
+static struct gpio mx27_3ds_camera_gpios[] = {
+ { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
+ { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -242,6 +266,7 @@
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("vcore", "spi0.0"),
+ REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
};
static struct regulator_init_data vmmc1_init = {
@@ -270,6 +295,22 @@
.consumer_supplies = vgen_consumers,
};
+static struct regulator_consumer_supply vvib_consumers[] = {
+ REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+ .constraints = {
+ .min_uV = 1300000,
+ .max_uV = 1300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+ .consumer_supplies = vvib_consumers,
+};
+
static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
{
.id = MC13783_REG_VMMC1,
@@ -283,6 +324,9 @@
}, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_VVIB, /* Power OV2640 */
+ .init_data = &vvib_init,
},
};
@@ -311,6 +355,51 @@
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
+static int mx27_3ds_camera_power(struct device *dev, int on)
+{
+ /* enable or disable the camera */
+ pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+ gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
+
+ if (!on)
+ goto out;
+
+ /* If enabled, give a reset impulse */
+ gpio_set_value(CSI_RESET, 0);
+ msleep(20);
+ gpio_set_value(CSI_RESET, 1);
+ msleep(100);
+
+out:
+ return 0;
+}
+
+static struct i2c_board_info mx27_3ds_i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
+ { .supply = "cmos_vcore" },
+ { .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &mx27_3ds_i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = mx27_3ds_camera_power,
+ .regulators = mx27_3ds_camera_regs,
+ .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs),
+};
+
+static struct platform_device mx27_3ds_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
+};
+
static struct imx_fb_videomode mx27_3ds_modes[] = {
{ /* 480x640 @ 60 Hz */
.mode = {
@@ -367,12 +456,21 @@
},
};
+static struct platform_device *devices[] __initdata = {
+ &mx27_3ds_ov2640,
+};
+
+static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
+ .clk = 26000000,
+};
+
static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
static void __init mx27pdk_init(void)
{
+ int ret;
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -404,7 +502,17 @@
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+ ret = gpio_request_array(mx27_3ds_camera_gpios,
+ ARRAY_SIZE(mx27_3ds_camera_gpios));
+ if (ret) {
+ pr_err("Failed to request camera gpios");
+ iclink_ov2640.power = NULL;
+ }
+
+ imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
}
static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4917aab..4518e54 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -28,7 +28,6 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31ads.h>
#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -39,6 +38,9 @@
#include "devices-imx31.h"
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
+
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
@@ -62,6 +64,7 @@
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
@@ -69,6 +72,10 @@
#define MXC_MAX_EXP_IO_LINES 16
+/* CS8900 */
+#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define CS4_CS8900_MMIO_START 0x20000
+
/*
* The serial port definition structure.
*/
@@ -101,11 +108,29 @@
},
};
+static const struct resource mx31ads_cs8900_resources[] __initconst = {
+ DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
+ DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+};
+
+static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
+ .name = "cs89x0",
+ .id = 0,
+ .res = mx31ads_cs8900_resources,
+ .num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
+};
+
static int __init mxc_init_extuart(void)
{
return platform_device_register(&serial_device);
}
+static void __init mxc_init_ext_ethernet(void)
+{
+ platform_device_register_full(
+ (struct platform_device_info *)&mx31ads_cs8900_devinfo);
+}
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -492,12 +517,15 @@
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
-/* static mappings */
+/*
+ * Static mappings, starting from the CS4 start address up to the start address
+ * of the CS8900.
+ */
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE / 2,
+ .length = CS4_CS8900_MMIO_START,
.type = MT_DEVICE
},
};
@@ -522,6 +550,7 @@
mxc_init_imx_uart();
mxc_init_i2c();
mxc_init_audio();
+ mxc_init_ext_ethernet();
}
static void __init mx31ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f225262..96e042d 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,7 +507,7 @@
struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
- clk_enable(clk);
+ clk_prepare_enable(clk);
mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 8a31e6f..6222151 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@
{
unsigned long reg = 0;
- if (!need_resched())
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- local_irq_enable();
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
+ arm_pm_idle = imx3_idle;
}
void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
+ arm_pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfe..49549a7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@
static void imx5_idle(void)
{
- if (!need_resched()) {
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- goto err0;
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (tzic_enable_wake())
- goto err1;
- cpu_do_idle();
-err1:
- clk_disable(gpc_dvfs_clk);
+ /* gpc clock is needed for SRPG */
+ if (gpc_dvfs_clk == NULL) {
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return;
}
-err0:
- local_irq_enable();
+ clk_enable(gpc_dvfs_clk);
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (tzic_enable_wake() != 0)
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
}
/*
@@ -108,7 +102,7 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- pm_idle = imx5_idle;
+ arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f..6fcffa7 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 6dc0934..e26a9cb 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -89,7 +89,7 @@
static int mx5_suspend_prepare(void)
{
- return clk_enable(gpc_dvfs_clk);
+ return clk_prepare_enable(gpc_dvfs_clk);
}
static int mx5_suspend_enter(suspend_state_t state)
@@ -119,7 +119,7 @@
static void mx5_suspend_finish(void)
{
- clk_disable(gpc_dvfs_clk);
+ clk_disable_unprepare(gpc_dvfs_clk);
}
static int mx5_pm_valid(suspend_state_t state)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab..15b87f2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
static struct amba_pl010_data integrator_uart_data;
-static struct amba_device rtc_device = {
- .dev = {
- .init_name = "mb:15",
- },
- .res = {
- .start = INTEGRATOR_RTC_BASE,
- .end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
+#define KMI0_IRQ { IRQ_KMIINT0 }
+#define KMI1_IRQ { IRQ_KMIINT1 }
-static struct amba_device uart0_device = {
- .dev = {
- .init_name = "mb:16",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART0_BASE,
- .end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+ INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "mb:17",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART1_BASE,
- .end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+ INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-static struct amba_device kmi0_device = {
- .dev = {
- .init_name = "mb:18",
- },
- .res = {
- .start = KMI0_BASE,
- .end = KMI0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+ INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
-static struct amba_device kmi1_device = {
- .dev = {
- .init_name = "mb:19",
- },
- .res = {
- .start = KMI1_BASE,
- .end = KMI1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a..3e538da 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@
pc_base = dev->resource.start + idev->offset;
- d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = amba_device_alloc(NULL, pc_base, SZ_4K);
if (!d)
continue;
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
- d->res.start = dev->resource.start + idev->offset;
- d->res.end = d->res.start + SZ_4K - 1;
- d->res.flags = IORESOURCE_MEM;
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
d->dev.platform_data = idev->platform_data;
- ret = amba_device_register(d, &dev->resource);
+ ret = amba_device_add(d, &dev->resource);
if (ret) {
dev_err(&d->dev, "unable to register device: %d\n", ret);
- kfree(d);
+ amba_device_put(d);
}
}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514e..0000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6..be9ead4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@
.gpio_cd = -1,
};
-static struct amba_device mmc_device = {
- .dev = {
- .init_name = "mb:1c",
- .platform_data = &mmc_data,
- },
- .res = {
- .start = INTEGRATOR_CP_MMC_BASE,
- .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
- .periphid = 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-static struct amba_device aaci_device = {
- .dev = {
- .init_name = "mb:1d",
- },
- .res = {
- .start = INTEGRATOR_CP_AACI_BASE,
- .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_AACIINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
/*
@@ -425,21 +407,8 @@
.remove = versatile_clcd_remove_dma,
};
-static struct amba_device clcd_device = {
- .dev = {
- .init_name = "mb:c0",
- .coherent_dma_mask = ~0,
- .platform_data = &clcd_data,
- },
- .res = {
- .start = INTCP_PA_CLCD_BASE,
- .end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = { IRQ_CP_CLCDCINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3..0000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727..0000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e76..0000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b..0000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb9..7c1495e 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@
void __init ixp23xx_sys_init(void)
{
+ /* by default, the idle code is disabled */
+ disable_hlt();
+
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4..a6329a0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@
{
int i = 0;
+ /*
+ * ixp4xx does not implement the XScale PWRMODE register
+ * so it must not call cpu_do_idle().
+ */
+ disable_hlt();
+
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9be..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
- /* ixp4xx does not implement the XScale PWRMODE register,
- * so it must not call cpu_do_idle() here.
- */
-#if 0
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde0..0000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992..0000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks,
- */
- cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index fde6635..75946ac 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,5 +29,30 @@
endmenu
+menu "LPC32XX chip components"
+
+config ARCH_LPC32XX_IRAM_FOR_NET
+ bool "Use IRAM for network buffers"
+ default y
+ help
+ Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
+ network buffer. If the total combined required buffer sizes is
+ larger than the size of IRAM, then SDRAM will be used instead.
+
+ This can be enabled safely if the IRAM is not intended for other
+ uses.
+
+config ARCH_LPC32XX_MII_SUPPORT
+ bool "Check to enable MII support or leave disabled for RMII support"
+ help
+ Say Y here to enable MII support, or N for RMII support. Regardless of
+ which support is selected, the ethernet interface driver needs to be
+ selected in the device driver networking section.
+
+ The PHY3250 reference board uses RMII, so users of this board should
+ say N.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 0e01bf4..b7ef511 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -87,6 +87,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/amba/bus.h>
@@ -100,6 +101,8 @@
static DEFINE_SPINLOCK(global_clkregs_lock);
+static int usb_pll_enable, usb_pll_valid;
+
static struct clk clk_armpll;
static struct clk clk_usbpll;
@@ -384,30 +387,62 @@
static int local_usbpll_enable(struct clk *clk, int enable)
{
u32 reg;
- int ret = -ENODEV;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ int ret = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(20);
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- if (enable == 0) {
- reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
- LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
+ LPC32XX_CLKPWR_USB_CTRL);
+
+ if (enable && usb_pll_valid && usb_pll_enable) {
+ ret = -ENODEV;
+ /*
+ * If the PLL rate has been previously set, then the rate
+ * in the PLL register is valid and can be enabled here.
+ * Otherwise, it needs to be enabled as part of setrate.
+ */
+
+ /*
+ * Gate clock into PLL
+ */
reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- /* Wait for PLL lock */
+ /*
+ * Enable PLL
+ */
+ reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ /*
+ * Wait for PLL to lock
+ */
while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
ret = 0;
+ else
+ udelay(10);
}
+ /*
+ * Gate clock from PLL if PLL is locked
+ */
if (ret == 0) {
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
+ LPC32XX_CLKPWR_USB_CTRL);
+ } else {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
}
+ } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) {
+ usb_pll_valid = 0;
+ usb_pll_enable = 0;
}
return ret;
@@ -425,7 +460,7 @@
*/
rate = rate * 1000;
- clkin = clk->parent->rate;
+ clkin = clk->get_rate(clk);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -439,7 +474,8 @@
static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
{
- u32 clkin, reg, usbdiv;
+ int ret = -ENODEV;
+ u32 clkin, usbdiv;
struct clk_pll_setup pllsetup;
/*
@@ -448,7 +484,7 @@
*/
rate = rate * 1000;
- clkin = clk->get_rate(clk);
+ clkin = clk->get_rate(clk->parent);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -457,22 +493,25 @@
if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
return -EINVAL;
+ /*
+ * Disable PLL clocks during PLL change
+ */
local_usbpll_enable(clk, 0);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- pllsetup.analog_on = 1;
+ pllsetup.analog_on = 0;
local_clk_usbpll_setup(&pllsetup);
- clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+ /*
+ * Start USB PLL and check PLL status
+ */
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ usb_pll_valid = 1;
+ usb_pll_enable = 1;
- return 0;
+ ret = local_usbpll_enable(clk, 1);
+ if (ret >= 0)
+ clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+ return ret;
}
static struct clk clk_usbpll = {
@@ -721,6 +760,41 @@
.get_rate = local_return_parent_rate,
};
+static int adc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+ u32 divider;
+
+ /* Use PERIPH_CLOCK */
+ tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+ tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+ /*
+ * Set clock divider so that we have equal to or less than
+ * 4.5MHz clock at ADC
+ */
+ divider = clk->get_rate(clk) / 4500000 + 1;
+ tmp |= divider;
+ __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+ /* synchronize rate of this clock w/ actual HW setting */
+ clk->rate = clk->get_rate(clk->parent) / divider;
+
+ if (enable == 0)
+ __raw_writel(0, clk->enable_reg);
+ else
+ __raw_writel(clk->enable_mask, clk->enable_reg);
+
+ return 0;
+}
+
+static struct clk clk_adc = {
+ .parent = &clk_pclk,
+ .enable = adc_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+ .get_rate = local_return_parent_rate,
+};
+
static int mmc_onoff_enable(struct clk *clk, int enable)
{
u32 tmp;
@@ -1055,6 +1129,7 @@
_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+ _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 369b152..bbbf063 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -138,6 +138,75 @@
};
/*
+ * ADC support
+ */
+static struct resource adc_resources[] = {
+ {
+ .start = LPC32XX_ADC_BASE,
+ .end = LPC32XX_ADC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_TS_IRQ,
+ .end = IRQ_LPC32XX_TS_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_adc_device = {
+ .name = "lpc32xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(adc_resources),
+ .resource = adc_resources,
+};
+
+/*
+ * USB support
+ */
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+static struct resource ohci_resources[] = {
+ {
+ .start = IO_ADDRESS(LPC32XX_USB_BASE),
+ .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_USB_HOST,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+struct platform_device lpc32xx_ohci_device = {
+ .name = "usb-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+ .num_resources = ARRAY_SIZE(ohci_resources),
+ .resource = ohci_resources,
+};
+
+/*
+ * Network Support
+ */
+static struct resource net_resources[] = {
+ [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
+ [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
+ [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
+};
+
+static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
+struct platform_device lpc32xx_net_device = {
+ .name = "lpc-eth",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lpc32xx_mac_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(net_resources),
+ .resource = net_resources,
+};
+
+/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 75640bfb..68e45e8 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -19,6 +19,7 @@
#ifndef __LPC32XX_COMMON_H
#define __LPC32XX_COMMON_H
+#include <mach/board.h>
#include <linux/platform_device.h>
/*
@@ -29,7 +30,10 @@
extern struct platform_device lpc32xx_i2c1_device;
extern struct platform_device lpc32xx_i2c2_device;
extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_adc_device;
extern struct platform_device lpc32xx_rtc_device;
+extern struct platform_device lpc32xx_ohci_device;
+extern struct platform_device lpc32xx_net_device;
/*
* Other arch specific structures and functions
@@ -66,7 +70,6 @@
extern void lpc32xx_get_uid(u32 devid[4]);
extern u32 lpc32xx_return_iram_size(void);
-
/*
* Pointers used for sizing and copying suspend function data
*/
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/board.h
similarity index 77%
rename from arch/arm/mach-lpc32xx/include/mach/system.h
rename to arch/arm/mach-lpc32xx/include/mach/board.h
index bf176c9..52531ca 100644
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ b/arch/arm/mach-lpc32xx/include/mach/board.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
+ * arm/arch/mach-lpc32xx/include/mach/board.h
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
@@ -16,12 +16,9 @@
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
+extern u32 lpc32xx_return_iram_size(void);
-#endif
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index c74de01..d080cb1 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -150,6 +150,10 @@
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
},
+ [IRQ_LPC32XX_ETHERNET] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
+ },
[IRQ_LPC32XX_USB_OTG_ATX] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 945a2f2..7f7401e 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/board.h>
#include <mach/gpio-lpc32xx.h>
#include "common.h"
@@ -149,20 +150,8 @@
.remove = lpc32xx_clcd_remove,
};
-static struct amba_device lpc32xx_clcd_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:clcd",
- .platform_data = &lpc32xx_clcd_data,
- },
- .res = {
- .start = LPC32XX_LCD_BASE,
- .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+ LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
@@ -191,20 +180,8 @@
.enable_dma = 0,
};
-static struct amba_device lpc32xx_ssp0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:ssp0",
- .platform_data = &lpc32xx_ssp0_data,
- },
- .res = {
- .start = LPC32XX_SSP0_BASE,
- .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+ LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
@@ -278,6 +255,9 @@
&lpc32xx_i2c2_device,
&lpc32xx_watchdog_device,
&lpc32xx_gpio_led_device,
+ &lpc32xx_adc_device,
+ &lpc32xx_ohci_device,
+ &lpc32xx_net_device,
};
static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 4de13ab..e2e1f1e 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -22,6 +22,7 @@
extern struct pxa_device_desc pxa910_device_nand;
extern struct platform_device pxa910_device_gpio;
+extern struct platform_device pxa910_device_rtc;
static inline int pxa910_add_uart(int id)
{
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 1a96585..8a37fb0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -57,6 +57,7 @@
#define APBC_PXA910_SSP1 APBC_REG(0x01c)
#define APBC_PXA910_SSP2 APBC_REG(0x020)
#define APBC_PXA910_IPC APBC_REG(0x024)
+#define APBC_PXA910_RTC APBC_REG(0x028)
#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
#define APBC_PXA910_KPC APBC_REG(0x030)
#define APBC_PXA910_TIMERS APBC_REG(0x034)
diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h
new file mode 100644
index 0000000..5bff886
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/addr-map.h>
+
+#define RTC_VIRT_BASE (APB_VIRT_BASE + 0x10000)
+#define RTC_REG(x) (*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR RTC_REG(0x00) /* RTC Count Register */
+#define RTAR RTC_REG(0x04) /* RTC Alarm Register */
+#define RTSR RTC_REG(0x08) /* RTC Status Register */
+#define RTTR RTC_REG(0x0C) /* RTC Timer Trim Register */
+
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001ea..0000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 3241a25..b6e1527 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -92,6 +92,7 @@
static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
+static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -109,6 +110,7 @@
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
};
static int __init pxa910_init(void)
@@ -183,3 +185,28 @@
.num_resources = ARRAY_SIZE(pxa910_resource_gpio),
.resource = pxa910_resource_gpio,
};
+
+static struct resource pxa910_resource_rtc[] = {
+ {
+ .start = 0xd4010000,
+ .end = 0xd401003f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA910_RTC_INT,
+ .end = IRQ_PXA910_RTC_INT,
+ .name = "rtc 1Hz",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_PXA910_RTC_ALARM,
+ .end = IRQ_PXA910_RTC_ALARM,
+ .name = "rtc alarm",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa910_device_rtc = {
+ .name = "sa1100-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa910_resource_rtc),
+ .resource = pxa910_resource_rtc,
+};
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 5ac5d58..e72c709d 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -124,6 +124,7 @@
static struct platform_device *ttc_dkb_devices[] = {
&pxa910_device_gpio,
+ &pxa910_device_rtc,
&ttc_dkb_device_onenand,
};
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 0a11342..962e711 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -80,12 +80,8 @@
static void __init msm8x60_dt_init(void)
{
- struct device_node *node;
-
- node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
- MSM8X60_QGIC_DIST_PHYS);
- if (node)
- irq_domain_add_simple(node, GIC_SPI_START);
+ irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
+ GIC_SPI_START);
if (of_machine_is_compatible("qcom,msm8660-surf")) {
printk(KERN_INFO "Init surf UART registers\n");
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f05..0000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
- mrc p15, 0, r1, c1, c0, 0 /* read current CR */
- bic r0, r1, #(1 << 2) /* clear dcache bit */
- bic r0, r0, #(1 << 12) /* clear icache bit */
- mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
-
- mov r0, #0 /* prepare wfi value */
- mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
- mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
- mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
-
- mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
-#endif
- mov pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 0000000..0c9e13c
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+ asm volatile (
+
+ "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
+ "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
+ "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
+
+ "mov r0, #0 /* prepare wfi value */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
+ "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
+
+ "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
+
+ : : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+ arm_pm_idle = msm_idle;
+ return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b..f5fb2ec 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*
*/
-void arch_idle(void);
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a538..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index e12e112..aec3471 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -456,6 +456,7 @@
_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
+ _REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
};
static int clk_misc_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5d68e41..8dd7b02 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -643,6 +643,7 @@
_REGISTER_CLOCK("duart", NULL, uart_clk)
_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
+ _REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 3fa651d..4d1329d 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@
#define mx23_add_auart0() mx23_add_auart(0)
#define mx23_add_auart1() mx23_add_auart(1)
+extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
+#define mx23_add_gpmi_nand(pdata) \
+ mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
+
extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
#define mx23_add_mxs_mmc(id, pdata) \
mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 4f50094..9dbeae1 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -34,6 +34,10 @@
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
+extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
+#define mx28_add_gpmi_nand(pdata) \
+ mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
+
extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847..01faffe 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@
int __init mxs_add_amba_device(const struct amba_device *dev)
{
- struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+ struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+ dev->res.start, resource_size(&dev->res));
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
- *adev = *dev;
+ adev->irq[0] = dev->irq[0];
+ adev->irq[1] = dev->irq[1];
- return amba_device_register(adev, &iomem_resource);
+ return amba_device_add(adev, &iomem_resource);
}
struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 18b6bf5..b8913df 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -12,6 +12,9 @@
select HAVE_CAN_FLEXCAN if CAN
bool
+config MXS_HAVE_PLATFORM_GPMI_NAND
+ bool
+
config MXS_HAVE_PLATFORM_MXS_I2C
bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index f52e3e5..c8f5c95 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -3,6 +3,7 @@
obj-y += platform-dma.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db0..a5479f7 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
- .irq = {soc ## _INT_DUART, NO_IRQ}, \
+ .irq = {soc ## _INT_DUART}, \
}
#ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
new file mode 100644
index 0000000..3e22df5
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+#include <linux/dma-mapping.h>
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
+ .devid = "imx23-gpmi-nand",
+ .res = {
+ /* GPMI */
+ DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
+ GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
+ GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+ /* BCH */
+ DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
+ GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
+ GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+ /* DMA */
+ DEFINE_RES_NAMED(MX23_DMA_GPMI0,
+ MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME,
+ IORESOURCE_DMA),
+ DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+ },
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
+ .devid = "imx28-gpmi-nand",
+ .res = {
+ /* GPMI */
+ DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
+ GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
+ GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
+ /* BCH */
+ DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
+ GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
+ GPMI_NAND_BCH_INTERRUPT_RES_NAME),
+ /* DMA */
+ DEFINE_RES_NAMED(MX28_DMA_GPMI0,
+ MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME,
+ IORESOURCE_DMA),
+ DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME),
+ },
+};
+#endif
+
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+ const struct mxs_gpmi_nand_data *data)
+{
+ return mxs_add_platform_device_dmamask(data->devid, -1,
+ data->res, GPMI_NAND_RES_SIZE,
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index dc369c1..f2e3839 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -66,6 +66,16 @@
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+/* gpmi-nand */
+#include <linux/mtd/gpmi-nand.h>
+struct mxs_gpmi_nand_data {
+ const char *devid;
+ const struct resource res[GPMI_NAND_RES_SIZE];
+};
+struct platform_device *__init
+mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
+ const struct mxs_gpmi_nand_data *data);
+
/* i2c */
struct mxs_mxs_i2c_data {
int id;
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb..0000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da..a9b4bbc 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
static int mxs_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b991323..2cdf6ef 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@
{
}
-static struct amba_device fb_device = {
- .dev = {
- .init_name = "fb",
- .coherent_dma_mask = ~0,
- },
- .res = {
- .start = 0x00104000,
- .end = 0x00104fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36..0000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf..f6f74ad 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@
#endif
}
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+ { IRQ_UART0 }, NULL);
-static struct amba_device uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+ { IRQ_UART1 }, NULL);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4..27f43a4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@
GPIO_DEVICE(3),
};
-static struct amba_device cpu8815_amba_rng = {
- .dev = {
- .init_name = "rng",
- },
- __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
static struct platform_device *platform_devs[] __initdata = {
cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@
};
static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng
+ &cpu8815_amba_rng_device
};
static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b..0000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * mach-nomadik/include/mach/system.h
- *
- * Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a..0000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20c..0c2c366 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
-#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -108,13 +108,7 @@
__u32 use_idlect1 = arm_idlect1_mask;
int do_sleep = 0;
- local_irq_disable();
local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
- local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
local_fiq_enable();
- local_irq_enable();
}
/*
@@ -583,8 +575,6 @@
#endif /* DEBUG && CONFIG_PROC_FS */
-static void (*saved_idle)(void) = NULL;
-
/*
* omap_pm_prepare - Do preliminary suspend work.
*
@@ -592,8 +582,7 @@
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
+ disable_hlt();
return 0;
}
@@ -630,7 +619,7 @@
static void omap_pm_finish(void)
{
- pm_idle = saved_idle;
+ enable_hlt();
}
@@ -687,7 +676,7 @@
return -ENODEV;
}
- pm_idle = omap1_pm_idle;
+ arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index ad49762..45fdfe2 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -68,7 +68,7 @@
{
struct device_node *node = of_find_matching_node(NULL, intc_match);
if (node)
- irq_domain_add_simple(node, 0);
+ irq_domain_add_legacy(node, 32, 0, 0, &irq_domain_simple_ops, NULL);
omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e2..ce91aad 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@
#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
-static struct amba_device omap3_etb_device = {
- .dev = {
- .init_name = "etb",
- },
- .res = {
- .start = ETB_BASE,
- .end = ETB_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
- .dev = {
- .init_name = "etm",
- },
- .res = {
- .start = ETM_BASE,
- .end = ETM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
static int __init emu_init(void)
{
@@ -66,4 +45,3 @@
}
subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721..0000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 3c8dd92..34b9766d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -29,6 +29,7 @@
#include "omap_hwmod_common_data.h"
+#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
@@ -376,6 +377,16 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+ { .irq = 18},
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+ { .irq = 19},
+ { .irq = -1 }
+};
+
/* L4 CORE -> SR1 interface */
static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
{
@@ -2664,6 +2675,10 @@
};
/* SR1 */
+static struct omap_smartreflex_dev_attr sr1_dev_attr = {
+ .sensor_voltdm_name = "mpu_iva",
+};
+
static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
&omap3_l4_core__sr1,
};
@@ -2672,7 +2687,6 @@
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2684,6 +2698,8 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
+ .dev_attr = &sr1_dev_attr,
+ .mpu_irqs = omap3_smartreflex_mpu_irqs,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2691,7 +2707,6 @@
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2703,9 +2718,15 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
+ .dev_attr = &sr1_dev_attr,
+ .mpu_irqs = omap3_smartreflex_mpu_irqs,
};
/* SR2 */
+static struct omap_smartreflex_dev_attr sr2_dev_attr = {
+ .sensor_voltdm_name = "core",
+};
+
static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
&omap3_l4_core__sr2,
};
@@ -2714,7 +2735,6 @@
.name = "sr2_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
- .vdd_name = "core",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2726,6 +2746,8 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
+ .dev_attr = &sr2_dev_attr,
+ .mpu_irqs = omap3_smartreflex_core_irqs,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2733,7 +2755,6 @@
.name = "sr2_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
- .vdd_name = "core",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2745,6 +2766,8 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
+ .dev_attr = &sr2_dev_attr,
+ .mpu_irqs = omap3_smartreflex_core_irqs,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index acb561e..08daa5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -33,6 +33,7 @@
#include "omap_hwmod_common_data.h"
+#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
@@ -3962,6 +3963,10 @@
};
/* smartreflex_core */
+static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
+ .sensor_voltdm_name = "core",
+};
+
static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
@@ -3998,7 +4003,6 @@
.mpu_irqs = omap44xx_smartreflex_core_irqs,
.main_clk = "smartreflex_core_fck",
- .vdd_name = "core",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
@@ -4008,9 +4012,14 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
+ .dev_attr = &smartreflex_core_dev_attr,
};
/* smartreflex_iva */
+static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
+ .sensor_voltdm_name = "iva",
+};
+
static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
@@ -4046,7 +4055,6 @@
.clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_iva_irqs,
.main_clk = "smartreflex_iva_fck",
- .vdd_name = "iva",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
@@ -4056,9 +4064,14 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
+ .dev_attr = &smartreflex_iva_dev_attr,
};
/* smartreflex_mpu */
+static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
+ .sensor_voltdm_name = "mpu",
+};
+
static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
@@ -4094,7 +4107,6 @@
.clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_mpu_irqs,
.main_clk = "smartreflex_mpu_fck",
- .vdd_name = "mpu",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
@@ -4104,6 +4116,7 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
+ .dev_attr = &smartreflex_mpu_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 23de98d..a4eb5c2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -226,7 +226,6 @@
static void omap2_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
if (!omap2_can_sleep()) {
@@ -243,7 +242,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -462,7 +460,7 @@
}
suspend_set_ops(&omap_pm_ops);
- pm_idle = omap2_pm_idle;
+ arm_pm_idle = omap2_pm_idle;
return 0;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc69875..b77df73 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@
static void omap3_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
- if (omap_irq_pending() || need_resched())
+ if (omap_irq_pending())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- pm_idle = omap3_pm_idle;
+ arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7..c840689 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
- local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
- local_irq_enable();
}
/**
@@ -255,8 +253,8 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- /* Overwrite the default arch_idle() */
- pm_idle = omap_default_idle;
+ /* Overwrite the default cpu_do_idle() */
+ arm_pm_idle = omap_default_idle;
omap4_idle_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118a..873b51d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 53d9d0a..955566e 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -29,6 +29,7 @@
static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
{
+ sr_disable_errgen(voltdm);
omap_vp_disable(voltdm);
sr_disable(voltdm);
if (is_volt_reset)
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 47c77a1..008fbd7 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -36,6 +36,12 @@
#define SR_DISABLE_TIMEOUT 200
struct omap_sr {
+ struct list_head node;
+ struct platform_device *pdev;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+ struct dentry *dbg_dir;
+ unsigned int irq;
int srid;
int ip_type;
int nvalue_count;
@@ -49,13 +55,7 @@
u32 senp_avgweight;
u32 senp_mod;
u32 senn_mod;
- unsigned int irq;
void __iomem *base;
- struct platform_device *pdev;
- struct list_head node;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
- struct dentry *dbg_dir;
};
/* sr_list contains all the instances of smartreflex module */
@@ -74,10 +74,6 @@
u32 value)
{
u32 reg_val;
- u32 errconfig_offs = 0, errconfig_mask = 0;
-
- reg_val = __raw_readl(sr->base + offset);
- reg_val &= ~mask;
/*
* Smartreflex error config register is special as it contains
@@ -88,16 +84,15 @@
* if they are currently set, but does allow the caller to write
* those bits.
*/
- if (sr->ip_type == SR_TYPE_V1) {
- errconfig_offs = ERRCONFIG_V1;
- errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
- } else if (sr->ip_type == SR_TYPE_V2) {
- errconfig_offs = ERRCONFIG_V2;
- errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
- }
+ if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
+ mask |= ERRCONFIG_STATUS_V1_MASK;
+ else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
+ mask |= ERRCONFIG_VPBOUNDINTST_V2;
- if (offset == errconfig_offs)
- reg_val &= ~errconfig_mask;
+ reg_val = __raw_readl(sr->base + offset);
+ reg_val &= ~mask;
+
+ value &= mask;
reg_val |= value;
@@ -128,21 +123,28 @@
static irqreturn_t sr_interrupt(int irq, void *data)
{
- struct omap_sr *sr_info = (struct omap_sr *)data;
+ struct omap_sr *sr_info = data;
u32 status = 0;
- if (sr_info->ip_type == SR_TYPE_V1) {
+ switch (sr_info->ip_type) {
+ case SR_TYPE_V1:
/* Read the status bits */
status = sr_read_reg(sr_info, ERRCONFIG_V1);
/* Clear them by writing back */
sr_write_reg(sr_info, ERRCONFIG_V1, status);
- } else if (sr_info->ip_type == SR_TYPE_V2) {
+ break;
+ case SR_TYPE_V2:
/* Read the status bits */
status = sr_read_reg(sr_info, IRQSTATUS);
/* Clear them by writing back */
sr_write_reg(sr_info, IRQSTATUS, status);
+ break;
+ default:
+ dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
+ sr_info->ip_type);
+ return IRQ_NONE;
}
if (sr_class->notify)
@@ -166,6 +168,7 @@
__func__);
return;
}
+
sys_clk_speed = clk_get_rate(sys_ck);
clk_put(sys_ck);
@@ -267,7 +270,7 @@
goto error;
}
ret = request_irq(sr_info->irq, sr_interrupt,
- 0, name, (void *)sr_info);
+ 0, name, sr_info);
if (ret)
goto error;
disable_irq(sr_info->irq);
@@ -288,12 +291,15 @@
"not function as desired\n", __func__);
kfree(name);
kfree(sr_info);
+
return ret;
}
static void sr_v1_disable(struct omap_sr *sr)
{
int timeout = 0;
+ int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+ ERRCONFIG_MCUBOUNDINTST;
/* Enable MCUDisableAcknowledge interrupt */
sr_modify_reg(sr, ERRCONFIG_V1,
@@ -302,13 +308,13 @@
/* SRCONFIG - disable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
- /* Disable all other SR interrupts and clear the status */
+ /* Disable all other SR interrupts and clear the status as needed */
+ if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
+ errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
sr_modify_reg(sr, ERRCONFIG_V1,
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
- (ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
- ERRCONFIG_MCUBOUNDINTST |
- ERRCONFIG_VPBOUNDINTST_V1));
+ errconf_val);
/*
* Wait for SR to be disabled.
@@ -337,9 +343,17 @@
/* SRCONFIG - disable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
- /* Disable all other SR interrupts and clear the status */
- sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+ /*
+ * Disable all other SR interrupts and clear the status
+ * write to status register ONLY on need basis - only if status
+ * is set.
+ */
+ if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
+ sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
ERRCONFIG_VPBOUNDINTST_V2);
+ else
+ sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+ 0x0);
sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
IRQENABLE_MCUVALIDINT |
IRQENABLE_MCUBOUNDSINT));
@@ -398,15 +412,16 @@
*/
int sr_configure_errgen(struct voltagedomain *voltdm)
{
- u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
- u32 vpboundint_st, senp_en = 0, senn_en = 0;
+ u32 sr_config, sr_errconfig, errconfig_offs;
+ u32 vpboundint_en, vpboundint_st;
+ u32 senp_en = 0, senn_en = 0;
u8 senp_shift, senn_shift;
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
- return -EINVAL;
+ return PTR_ERR(sr);
}
if (!sr->clk_length)
@@ -418,20 +433,23 @@
sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
- if (sr->ip_type == SR_TYPE_V1) {
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
sr_config |= SRCONFIG_DELAYCTRL;
senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
errconfig_offs = ERRCONFIG_V1;
vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
- } else if (sr->ip_type == SR_TYPE_V2) {
+ break;
+ case SR_TYPE_V2:
senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
errconfig_offs = ERRCONFIG_V2;
vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
- } else {
+ break;
+ default:
dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
"module without specifying the ip\n", __func__);
return -EINVAL;
@@ -447,8 +465,55 @@
sr_errconfig);
/* Enabling the interrupts if the ERROR module is used */
- sr_modify_reg(sr, errconfig_offs,
- vpboundint_en, (vpboundint_en | vpboundint_st));
+ sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
+ vpboundint_en);
+
+ return 0;
+}
+
+/**
+ * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
+ * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable the error generator module inside the smartreflex module.
+ *
+ * Returns 0 on success and error value in case of failure.
+ */
+int sr_disable_errgen(struct voltagedomain *voltdm)
+{
+ u32 errconfig_offs;
+ u32 vpboundint_en, vpboundint_st;
+ struct omap_sr *sr = _sr_lookup(voltdm);
+
+ if (IS_ERR(sr)) {
+ pr_warning("%s: omap_sr struct for sr_%s not found\n",
+ __func__, voltdm->name);
+ return PTR_ERR(sr);
+ }
+
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
+ errconfig_offs = ERRCONFIG_V1;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+ break;
+ case SR_TYPE_V2:
+ errconfig_offs = ERRCONFIG_V2;
+ vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+ vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+ "module without specifying the ip\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Disable the interrupts of ERROR module */
+ sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
+
+ /* Disable the Sensor and errorgen */
+ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
return 0;
}
@@ -475,7 +540,7 @@
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
- return -EINVAL;
+ return PTR_ERR(sr);
}
if (!sr->clk_length)
@@ -488,14 +553,17 @@
SRCONFIG_SENENABLE |
(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
- if (sr->ip_type == SR_TYPE_V1) {
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
sr_config |= SRCONFIG_DELAYCTRL;
senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
- } else if (sr->ip_type == SR_TYPE_V2) {
+ break;
+ case SR_TYPE_V2:
senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
- } else {
+ break;
+ default:
dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
"module without specifying the ip\n", __func__);
return -EINVAL;
@@ -511,20 +579,27 @@
* Enabling the interrupts if MINMAXAVG module is used.
* TODO: check if all the interrupts are mandatory
*/
- if (sr->ip_type == SR_TYPE_V1) {
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
sr_modify_reg(sr, ERRCONFIG_V1,
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
ERRCONFIG_MCUBOUNDINTEN),
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
- } else if (sr->ip_type == SR_TYPE_V2) {
+ break;
+ case SR_TYPE_V2:
sr_write_reg(sr, IRQSTATUS,
IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
sr_write_reg(sr, IRQENABLE_SET,
IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+ "module without specifying the ip\n", __func__);
+ return -EINVAL;
}
return 0;
@@ -543,15 +618,15 @@
*/
int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
{
- u32 nvalue_reciprocal;
struct omap_volt_data *volt_data;
struct omap_sr *sr = _sr_lookup(voltdm);
+ u32 nvalue_reciprocal;
int ret;
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
- return -EINVAL;
+ return PTR_ERR(sr);
}
volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
@@ -559,7 +634,7 @@
if (IS_ERR(volt_data)) {
dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
"for nominal voltage %ld\n", __func__, volt);
- return -ENODATA;
+ return PTR_ERR(volt_data);
}
nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
@@ -617,10 +692,17 @@
* disable the clocks.
*/
if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
- if (sr->ip_type == SR_TYPE_V1)
+ switch (sr->ip_type) {
+ case SR_TYPE_V1:
sr_v1_disable(sr);
- else if (sr->ip_type == SR_TYPE_V2)
+ break;
+ case SR_TYPE_V2:
sr_v2_disable(sr);
+ break;
+ default:
+ dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
+ sr->ip_type);
+ }
}
pm_runtime_put_sync_suspend(&sr->pdev->dev);
@@ -779,10 +861,10 @@
sr_pmic_data = pmic_data;
}
-/* PM Debug Fs enteries to enable disable smartreflex. */
+/* PM Debug FS entries to enable and disable smartreflex. */
static int omap_sr_autocomp_show(void *data, u64 *val)
{
- struct omap_sr *sr_info = (struct omap_sr *) data;
+ struct omap_sr *sr_info = data;
if (!sr_info) {
pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -796,7 +878,7 @@
static int omap_sr_autocomp_store(void *data, u64 val)
{
- struct omap_sr *sr_info = (struct omap_sr *) data;
+ struct omap_sr *sr_info = data;
if (!sr_info) {
pr_warning("%s: omap_sr struct not found\n", __func__);
@@ -804,7 +886,7 @@
}
/* Sanity check */
- if (val && (val != 1)) {
+ if (val > 1) {
pr_warning("%s: Invalid argument %lld\n", __func__, val);
return -EINVAL;
}
@@ -821,11 +903,11 @@
}
DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
- omap_sr_autocomp_store, "%llu\n");
+ omap_sr_autocomp_store, "%llu\n");
static int __init omap_sr_probe(struct platform_device *pdev)
{
- struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+ struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
struct dentry *nvalue_dir;
@@ -833,12 +915,15 @@
int i, ret = 0;
char *name;
+ sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
__func__);
return -ENOMEM;
}
+ platform_set_drvdata(pdev, sr_info);
+
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
ret = -EINVAL;
@@ -904,7 +989,7 @@
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
if (!sr_dbg_dir) {
sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
- if (!sr_dbg_dir) {
+ if (IS_ERR_OR_NULL(sr_dbg_dir)) {
ret = PTR_ERR(sr_dbg_dir);
pr_err("%s:sr debugfs dir creation failed(%d)\n",
__func__, ret);
@@ -921,7 +1006,7 @@
}
sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
kfree(name);
- if (IS_ERR(sr_info->dbg_dir)) {
+ if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
ret = PTR_ERR(sr_info->dbg_dir);
@@ -938,7 +1023,7 @@
&sr_info->err_minlimit);
nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
- if (IS_ERR(nvalue_dir)) {
+ if (IS_ERR_OR_NULL(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
ret = PTR_ERR(nvalue_dir);
@@ -994,7 +1079,7 @@
if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
- return -EINVAL;
+ return PTR_ERR(sr_info);
}
if (sr_info->autocomp_active)
@@ -1011,8 +1096,32 @@
return 0;
}
+static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+{
+ struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct omap_sr *sr_info;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+ return;
+ }
+
+ sr_info = _sr_lookup(pdata->voltdm);
+ if (IS_ERR(sr_info)) {
+ dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+ __func__);
+ return;
+ }
+
+ if (sr_info->autocomp_active)
+ sr_stop_vddautocomp(sr_info);
+
+ return;
+}
+
static struct platform_driver smartreflex_driver = {
.remove = __devexit_p(omap_sr_remove),
+ .shutdown = __devexit_p(omap_sr_shutdown),
.driver = {
.name = "smartreflex",
},
@@ -1042,12 +1151,12 @@
return 0;
}
+late_initcall(sr_init);
static void __exit sr_exit(void)
{
platform_driver_unregister(&smartreflex_driver);
}
-late_initcall(sr_init);
module_exit(sr_exit);
MODULE_DESCRIPTION("OMAP Smartreflex Driver");
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index 5f35b9e..5809141 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -152,6 +152,15 @@
void (*sr_pmic_init) (void);
};
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name: Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+ const char *sensor_voltdm_name;
+};
+
#ifdef CONFIG_OMAP_SMARTREFLEX
/*
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
@@ -231,6 +240,7 @@
int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
void sr_disable(struct voltagedomain *voltdm);
int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_disable_errgen(struct voltagedomain *voltdm);
int sr_configure_minmax(struct voltagedomain *voltdm);
/* API to register the smartreflex class driver with the smartreflex driver */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 78c9437..a503e1e 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -74,6 +74,7 @@
struct omap_sr_data *sr_data;
struct platform_device *pdev;
struct omap_volt_data *volt_data;
+ struct omap_smartreflex_dev_attr *sr_dev_attr;
char *name = "smartreflex";
static int i;
@@ -84,9 +85,11 @@
return -ENOMEM;
}
- if (!oh->vdd_name) {
+ sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+ if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
pr_err("%s: No voltage domain specified for %s."
- "Cannot initialize\n", __func__, oh->name);
+ "Cannot initialize\n", __func__,
+ oh->name);
goto exit;
}
@@ -94,10 +97,10 @@
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
- sr_data->voltdm = voltdm_lookup(oh->vdd_name);
+ sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
- __func__, oh->vdd_name);
+ __func__, sr_dev_attr->sensor_voltdm_name);
goto exit;
}
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a265..0000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb..0000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching and wait for interrupt
- * tricks.
- */
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe71..0000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9..0000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index d93ceef..37c2de9 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -68,7 +68,7 @@
if (!sirfsoc_intc_base)
panic("unable to map intc cpu registers\n");
- irq_domain_add_simple(np, 0);
+ irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
of_node_put(np);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 5bc1312..84f2d70 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -406,20 +406,17 @@
[1] = {
.start = IRQ_RTC1Hz,
.end = IRQ_RTC1Hz,
+ .name = "rtc 1Hz",
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_RTCAlrm,
.end = IRQ_RTCAlrm,
+ .name = "rtc alarm",
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device sa1100_device_rtc = {
- .name = "sa1100-rtc",
- .id = -1,
-};
-
struct platform_device pxa_device_rtc = {
.name = "pxa-rtc",
.id = -1,
@@ -427,6 +424,27 @@
.resource = pxa_rtc_resources,
};
+static struct resource sa1100_rtc_resources[] = {
+ {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .name = "rtc 1Hz",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .name = "rtc alarm",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device sa1100_device_rtc = {
+ .name = "sa1100-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sa1100_rtc_resources),
+ .resource = sa1100_rtc_resources,
+};
+
static struct resource pxa_ac97_resources[] = {
[0] = {
.start = 0x40500000,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 208eef1..8a1ef27 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -28,7 +28,8 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
-#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max1586.h>
#include <linux/spi/ads7846.h>
@@ -682,14 +683,34 @@
.consumer_supplies = bq24022_consumers,
};
-static struct bq24022_mach_info bq24022_info = {
- .gpio_nce = GPIO72_HX4700_BQ24022_nCHARGE_EN,
- .gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
- .init_data = &bq24022_init_data,
+static struct gpio bq24022_gpios[] = {
+ { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+ { .value = 100000, .gpios = (0 << 0) },
+ { .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+ .supply_name = "bq24022",
+
+ .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 0,
+
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
+
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
- .name = "bq24022",
+ .name = "gpio-regulator",
.id = -1,
.dev = {
.platform_data = &bq24022_info,
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd..0000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 3d6baf9..5e26f3e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,7 +25,8 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
-#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
@@ -596,14 +597,34 @@
.consumer_supplies = bq24022_consumers,
};
-static struct bq24022_mach_info bq24022_info = {
- .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
- .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
- .init_data = &bq24022_init_data,
+static struct gpio bq24022_gpios[] = {
+ { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+ { .value = 100000, .gpios = (0 << 0) },
+ { .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+ .supply_name = "bq24022",
+
+ .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 0,
+
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
+
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
- .name = "bq24022",
+ .name = "gpio-regulator",
.id = -1,
.dev = {
.platform_data = &bq24022_info,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 3918a67..1570d45 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -89,6 +89,7 @@
INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 5ce434b..47601f8 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -231,6 +231,7 @@
INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
void __init pxa95x_init_irq(void)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57a..f8f2c0a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
#include <asm/setup.h>
#include <asm/leds.h>
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = REALVIEW_##base##_BASE, \
- .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625..708f841 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
@@ -73,7 +74,6 @@
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-#define IRQ_PB1176_GPIO0 -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671..0000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145..157e1bc 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_EB_GPIO2 }
+#define GPIO3_IRQ { IRQ_EB_GPIO3 }
-#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_EB_KMI0 }
+#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD }
+#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ { }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
+#define GPIO1_IRQ { IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ { IRQ_EB_SCI }
+#define EB_UART0_IRQ { IRQ_EB_UART0 }
+#define EB_UART1_IRQ { IRQ_EB_UART1 }
+#define EB_UART2_IRQ { IRQ_EB_UART2 }
+#define EB_UART3_IRQ { IRQ_EB_UART3 }
+#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94..b1d7caf 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@
/*
* RealView PB1176 AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
+#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PB1176_KMI0 }
+#define KMI1_IRQ { IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
+#define SCTL_IRQ { }
+#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
+#define SCI_IRQ { IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
-AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
-AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
+AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335..ae7fe54 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@
* RealView PB11MPCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
+#define DMAC_IRQ { IRQ_PB11MP_DMAC }
+#define SCTL_IRQ { }
+#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
+#define SCI_IRQ { IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59..5965017 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@
* RealView PBA8Core AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
+#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBA8_KMI0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
+#define DMAC_IRQ { IRQ_PBA8_DMAC }
+#define SCTL_IRQ { }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
+#define SCI_IRQ { IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac71564..1cd9956 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@
* RealView PBXCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
+#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBX_KMI0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
+#define DMAC_IRQ { IRQ_PBX_DMAC }
+#define SCTL_IRQ { }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC }
+#define SCI_IRQ { IRQ_PBX_SCI }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab9..0000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
- unsigned long tmp;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++) {
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
- }
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
- if (s3c24xx_idle != NULL)
- (s3c24xx_idle)();
- else
- s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 41245a6..6b21ba1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -162,7 +162,7 @@
return (latch_state >> (offset + 16)) & 1;
}
-struct gpio_chip h1940_latch_gpiochip = {
+static struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
@@ -304,7 +304,7 @@
{ .volt = 3841, .cur = 0, .level = 0},
};
-int h1940_bat_init(void)
+static int h1940_bat_init(void)
{
int ret;
@@ -317,17 +317,17 @@
}
-void h1940_bat_exit(void)
+static void h1940_bat_exit(void)
{
gpio_free(H1940_LATCH_SM803_ENABLE);
}
-void h1940_enable_charger(void)
+static void h1940_enable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
}
-void h1940_disable_charger(void)
+static void h1940_disable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
}
@@ -364,7 +364,7 @@
},
};
-DEFINE_SPINLOCK(h1940_blink_spin);
+static DEFINE_SPINLOCK(h1940_blink_spin);
int h1940_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85..c6eac98 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
-
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
@@ -164,7 +162,7 @@
/* set our idle function */
- s3c24xx_idle = s3c2412_idle;
+ arm_pm_idle = s3c2412_idle;
/* register our io-tables */
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 59f54d1..e01490d 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -132,12 +132,6 @@
.ctrlbit = S3C2416_HCLKCON_HSMMC0,
};
-void __init_or_cpufreq s3c2416_setup_clocks(void)
-{
- s3c2443_common_setup_clocks(s3c2416_get_pll);
-}
-
-
static struct clksrc_clk *clksrcs[] __initdata = {
&hsspi_eplldiv,
&hsspi_mux,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index eebe1e7..30a44f8 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -125,7 +125,7 @@
}
};
-void smdk2416_hsudc_gpio_init(void)
+static void smdk2416_hsudc_gpio_init(void)
{
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
@@ -133,20 +133,20 @@
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
}
-void smdk2416_hsudc_gpio_uninit(void)
+static void smdk2416_hsudc_gpio_uninit(void)
{
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
}
-struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
+static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
.epnum = 9,
.gpio_init = smdk2416_hsudc_gpio_init,
.gpio_uninit = smdk2416_hsudc_gpio_uninit,
};
-struct s3c_fb_pd_win smdk2416_fb_win[] = {
+static struct s3c_fb_pd_win smdk2416_fb_win[] = {
[0] = {
/* think this is the same as the smdk6410 */
.win_mode = {
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d28..0e9a71c 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
@@ -60,6 +59,7 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -88,8 +88,6 @@
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- /* s3c24xx_idle = s3c2416_idle; */
-
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
@@ -101,6 +99,7 @@
s3c_fb_setname("s3c2443-fb");
s3c_adc_setname("s3c2416-adc");
+ s3c_rtc_setname("s3c2416-rtc");
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9a4a5bc..cfd2020 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -258,7 +258,7 @@
.ramp_time = 5,
};
-struct pcf50633_platform_data gta02_pcf_pdata = {
+static struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
PCF50633_INT1_USBREM |
@@ -404,7 +404,7 @@
};
-struct platform_device s3c24xx_pwm_device = {
+static struct platform_device s3c24xx_pwm_device = {
.name = "s3c24xx_pwm",
.num_resources = 0,
};
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 6f68abf..200debb 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -217,7 +217,7 @@
{ .volt = 3820, .cur = 0, .level = 0},
};
-int rx1950_bat_init(void)
+static int rx1950_bat_init(void)
{
int ret;
@@ -236,25 +236,25 @@
return ret;
}
-void rx1950_bat_exit(void)
+static void rx1950_bat_exit(void)
{
gpio_free(S3C2410_GPJ(2));
gpio_free(S3C2410_GPJ(3));
}
-void rx1950_enable_charger(void)
+static void rx1950_enable_charger(void)
{
gpio_direction_output(S3C2410_GPJ(2), 1);
gpio_direction_output(S3C2410_GPJ(3), 1);
}
-void rx1950_disable_charger(void)
+static void rx1950_disable_charger(void)
{
gpio_direction_output(S3C2410_GPJ(2), 0);
gpio_direction_output(S3C2410_GPJ(3), 0);
}
-DEFINE_SPINLOCK(rx1950_blink_spin);
+static DEFINE_SPINLOCK(rx1950_blink_spin);
static int rx1950_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
@@ -382,7 +382,7 @@
static struct pwm_device *lcd_pwm;
-void rx1950_lcd_power(int enable)
+static void rx1950_lcd_power(int enable)
{
int i;
static int enabled;
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index b9deaeb..b7778a9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
+#include <plat/rtc-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -73,6 +74,7 @@
s3c_fb_setname("s3c2443-fb");
s3c_adc_setname("s3c2443-adc");
+ s3c_rtc_setname("s3c2443-rtc");
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 5eb9c9a..7a10be6 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -25,8 +25,6 @@
void s3c64xx_restart(char mode, const char *cmd);
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
-
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed43..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 8bec61e..0c7e1d9 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -96,7 +96,7 @@
S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
}
-struct syscore_ops s3c64xx_irq_syscore_ops = {
+static struct syscore_ops s3c64xx_irq_syscore_ops = {
.suspend = s3c64xx_irq_pm_suspend,
.resume = s3c64xx_irq_pm_resume,
};
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index 241d0e6..57e7189 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -73,7 +73,7 @@
{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
};
-unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
u32 clkdiv;
@@ -84,7 +84,8 @@
return rate / (clkdiv + 1);
}
-unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
+ unsigned long rate)
{
u32 iter;
@@ -96,7 +97,7 @@
return clock_table[ARRAY_SIZE(clock_table) - 1][0];
}
-int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
{
u32 round_tmp;
u32 iter;
@@ -148,7 +149,7 @@
return 0;
}
-struct clk_ops s5p64x0_clkarm_ops = {
+static struct clk_ops s5p64x0_clkarm_ops = {
.get_rate = s5p64x0_armclk_get_rate,
.set_rate = s5p64x0_armclk_set_rate,
.round_rate = s5p64x0_armclk_round_rate,
@@ -173,7 +174,7 @@
.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
};
-struct clk *clkset_hclk_low_list[] = {
+static struct clk *clkset_hclk_low_list[] = {
&clk_mout_apll.clk,
&clk_mout_mpll.clk,
};
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a3..9143f8b 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@
{
unsigned long val;
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
- cpu_do_idle();
- }
- local_irq_enable();
+ cpu_do_idle();
}
/*
@@ -286,7 +283,7 @@
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
- pm_idle = s5p64x0_idle;
+ arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c07..2ee5dc0 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -38,7 +38,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 s5p6440_pdma_peri[] = {
+static u8 s5p6440_pdma_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -63,12 +63,12 @@
DMACH_SPI1_RX,
};
-struct dma_pl330_platdata s5p6440_pdma_pdata = {
+static struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
.peri_id = s5p6440_pdma_peri,
};
-u8 s5p6450_pdma_peri[] = {
+static u8 s5p6450_pdma_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -103,39 +103,27 @@
DMACH_UART5_TX,
};
-struct dma_pl330_platdata s5p6450_pdma_pdata = {
+static struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
.peri_id = s5p6450_pdma_peri,
};
-struct amba_device s5p64x0_device_pdma = {
- .dev = {
- .init_name = "dma-pl330",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .res = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
+ S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
if (soc_is_s5p6450()) {
dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
} else {
dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
}
- amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+ amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
index ff85b4b..0ef47d1 100644
--- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -22,16 +22,9 @@
extern int s5p64x0_epll_enable(struct clk *clk, int enable);
extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
-extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
-extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
-extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
-
-extern struct clk_ops s5p64x0_clkarm_ops;
-
extern struct clksrc_clk clk_armclk;
extern struct clksrc_clk clk_dout_mpll;
-extern struct clk *clkset_hclk_low_list[];
extern struct clksrc_sources clkset_hclk_low;
extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e09..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 247194d..16eca4e 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -170,7 +170,7 @@
[1] = &clk_div_apll2.clk,
};
-struct clksrc_sources clk_src_mout_am = {
+static struct clksrc_sources clk_src_mout_am = {
.sources = clk_src_mout_am_list,
.nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
};
@@ -212,7 +212,7 @@
[1] = &clk_div_d1_bus.clk,
};
-struct clksrc_sources clk_src_mout_onenand = {
+static struct clksrc_sources clk_src_mout_onenand = {
.sources = clk_src_mout_onenand_list,
.nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
};
@@ -756,7 +756,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group1 = {
+static struct clksrc_sources clk_src_group1 = {
.sources = clk_src_group1_list,
.nr_sources = ARRAY_SIZE(clk_src_group1_list),
};
@@ -766,7 +766,7 @@
[1] = &clk_div_mpll.clk,
};
-struct clksrc_sources clk_src_group2 = {
+static struct clksrc_sources clk_src_group2 = {
.sources = clk_src_group2_list,
.nr_sources = ARRAY_SIZE(clk_src_group2_list),
};
@@ -780,7 +780,7 @@
[5] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group3 = {
+static struct clksrc_sources clk_src_group3 = {
.sources = clk_src_group3_list,
.nr_sources = ARRAY_SIZE(clk_src_group3_list),
};
@@ -806,7 +806,7 @@
[5] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group4 = {
+static struct clksrc_sources clk_src_group4 = {
.sources = clk_src_group4_list,
.nr_sources = ARRAY_SIZE(clk_src_group4_list),
};
@@ -831,7 +831,7 @@
[4] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group5 = {
+static struct clksrc_sources clk_src_group5 = {
.sources = clk_src_group5_list,
.nr_sources = ARRAY_SIZE(clk_src_group5_list),
};
@@ -854,7 +854,7 @@
[2] = &clk_div_hdmi.clk,
};
-struct clksrc_sources clk_src_group6 = {
+static struct clksrc_sources clk_src_group6 = {
.sources = clk_src_group6_list,
.nr_sources = ARRAY_SIZE(clk_src_group6_list),
};
@@ -866,7 +866,7 @@
[3] = &clk_vclk54m,
};
-struct clksrc_sources clk_src_group7 = {
+static struct clksrc_sources clk_src_group7 = {
.sources = clk_src_group7_list,
.nr_sources = ARRAY_SIZE(clk_src_group7_list),
};
@@ -877,7 +877,7 @@
[2] = &clk_fin_epll,
};
-struct clksrc_sources clk_src_mmc0 = {
+static struct clksrc_sources clk_src_mmc0 = {
.sources = clk_src_mmc0_list,
.nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
};
@@ -889,7 +889,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_mmc12 = {
+static struct clksrc_sources clk_src_mmc12 = {
.sources = clk_src_mmc12_list,
.nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
};
@@ -901,7 +901,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_irda_usb = {
+static struct clksrc_sources clk_src_irda_usb = {
.sources = clk_src_irda_usb_list,
.nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
};
@@ -912,7 +912,7 @@
[2] = &clk_div_mpll.clk,
};
-struct clksrc_sources clk_src_pwi = {
+static struct clksrc_sources clk_src_pwi = {
.sources = clk_src_pwi_list,
.nr_sources = ARRAY_SIZE(clk_src_pwi_list),
};
@@ -923,7 +923,7 @@
[2] = &clk_sclk_audio2.clk,
};
-struct clksrc_sources clk_src_sclk_spdif = {
+static struct clksrc_sources clk_src_sclk_spdif = {
.sources = clk_sclk_spdif_list,
.nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
};
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c909573..ff71e2d 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@
}
};
-static void s5pc100_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
/*
* s5pc100_map_io
*
@@ -210,10 +202,6 @@
int __init s5pc100_init(void)
{
printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pc100_idle;
-
return device_register(&s5pc100_dev);
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d3..afd8db2 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,7 +35,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -68,28 +68,15 @@
DMACH_HSI_TX,
};
-struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri_id = pdma0_peri,
};
-struct amba_device s5pc100_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma0_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
+ S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -122,36 +109,23 @@
DMACH_MSM_REQ3,
};
-struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri_id = pdma1_peri,
};
-struct amba_device s5pc100_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma1_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
+ S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c2..0000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdc..4c9e902 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@
}
};
-static void s5pv210_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@
int __init s5pv210_init(void)
{
printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pv210_idle;
-
return device_register(&s5pv210_dev);
}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0..86ce62f 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -35,7 +35,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -66,28 +66,15 @@
DMACH_SPDIF,
};
-struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+static struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri_id = pdma0_peri,
};
-struct amba_device s5pv210_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma0_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
+ S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -122,36 +109,23 @@
DMACH_PCM2_TX,
};
-struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+static struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri_id = pdma1_peri,
};
-struct amba_device s5pv210_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma1_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
+ S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ce..0000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index ff91526..2cf5ed7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -844,7 +844,7 @@
},
};
-struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.isp_info = goni_camera_sensors,
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index dff9ea7..0933c8e 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -140,7 +140,7 @@
.dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
};
-struct platform_device smdkv210_dm9000 = {
+static struct platform_device smdkv210_dm9000 = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dab3c63..172ebd0 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,17 +11,29 @@
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
#include <mach/hardware.h>
-/*
- * Very simple clock implementation - we only have one clock to deal with.
- */
+struct clkops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+};
+
struct clk {
+ const struct clkops *ops;
unsigned int enabled;
};
-static void clk_gpio27_enable(void)
+#define DEFINE_CLK(_name, _ops) \
+struct clk clk_##_name = { \
+ .ops = _ops, \
+ }
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void clk_gpio27_enable(struct clk *clk)
{
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -32,38 +44,24 @@
TUCR = TUCR_3_6864MHz;
}
-static void clk_gpio27_disable(void)
+static void clk_gpio27_disable(struct clk *clk)
{
TUCR = 0;
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
}
-static struct clk clk_gpio27;
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- const char *devname = dev_name(dev);
-
- return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- clk_gpio27_enable();
- spin_unlock_irqrestore(&clocks_lock, flags);
+ if (clk) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->ops->enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+
return 0;
}
EXPORT_SYMBOL(clk_enable);
@@ -72,17 +70,31 @@
{
unsigned long flags;
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- clk_gpio27_disable();
- spin_unlock_irqrestore(&clocks_lock, flags);
+ if (clk) {
+ WARN_ON(clk->enabled == 0);
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->ops->disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
}
EXPORT_SYMBOL(clk_disable);
-unsigned long clk_get_rate(struct clk *clk)
+const struct clkops clk_gpio27_ops = {
+ .enable = clk_gpio27_enable,
+ .disable = clk_gpio27_disable,
+};
+
+static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+
+static struct clk_lookup sa11xx_clkregs[] = {
+ CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
+ CLKDEV_INIT("sa1100-rtc", NULL, NULL),
+};
+
+static int __init sa11xx_clk_init(void)
{
- return 3686400;
+ clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
+ return 0;
}
-EXPORT_SYMBOL(clk_get_rate);
+core_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index bb10ee2..7c1ebf4 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -345,9 +345,17 @@
sa11x0_register_device(&sa11x0ir_device, irda);
}
+static struct resource sa1100_rtc_resources[] = {
+ DEFINE_RES_MEM(0x90010000, 0x9001003f),
+ DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
+ DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
+};
+
static struct platform_device sa11x0rtc_device = {
.name = "sa1100-rtc",
.id = -1,
+ .num_resources = ARRAY_SIZE(sa1100_rtc_resources),
+ .resource = sa1100_rtc_resources,
};
static struct platform_device *sa11x0_devices[] __initdata = {
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208..0000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c25..6a2a7f2 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@
.init = shark_timer_init,
};
+static void shark_init_early(void)
+{
+ disable_hlt();
+}
+
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.map_io = shark_map_io,
+ .init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5..0000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18..3bbcb3f 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee63..0000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4..9da50e281 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@
.irq_base = SPEAR300_GPIO1_INT_BASE,
};
-struct amba_device spear300_gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+ {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45d..b1733c3 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
-struct amba_device spear3xx_gpio_device = {
- .dev = {
- .init_name = "gpio",
- .platform_data = &gpio_plat_data,
- },
- .res = {
- .start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+ {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
-struct amba_device spear3xx_uart_device = {
- .dev = {
- .init_name = "uart",
- },
- .res = {
- .start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+ {SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be..0000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628..b997b1b 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_0, NO_IRQ},
+ .irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
@@ -44,7 +44,7 @@
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_1, NO_IRQ},
+ .irq = {IRQ_UART_1},
}
};
@@ -73,7 +73,7 @@
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+ .irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
@@ -84,7 +84,7 @@
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+ .irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
@@ -95,7 +95,7 @@
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_APPL_GPIO, NO_IRQ},
+ .irq = {IRQ_APPL_GPIO},
}
};
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e120ff5..e0b7a4d 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -7,6 +7,7 @@
obj-y += timer.o
obj-y += pinmux.o
obj-y += fuse.o
+obj-y += pmc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
@@ -15,7 +16,7 @@
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
+obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
new file mode 100644
index 0000000..e75451e
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+
+#include <mach/dma.h>
+#include <mach/iomap.h>
+
+#include "apbio.h"
+
+static DEFINE_MUTEX(tegra_apb_dma_lock);
+
+static struct tegra_dma_channel *tegra_apb_dma;
+static u32 *tegra_apb_bb;
+static dma_addr_t tegra_apb_bb_phys;
+static DECLARE_COMPLETION(tegra_apb_wait);
+
+bool tegra_apb_init(void)
+{
+ struct tegra_dma_channel *ch;
+
+ mutex_lock(&tegra_apb_dma_lock);
+
+ /* Check to see if we raced to setup */
+ if (tegra_apb_dma)
+ goto out;
+
+ ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
+ TEGRA_DMA_SHARED);
+
+ if (!ch)
+ goto out_fail;
+
+ tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
+ &tegra_apb_bb_phys, GFP_KERNEL);
+ if (!tegra_apb_bb) {
+ pr_err("%s: can not allocate bounce buffer\n", __func__);
+ tegra_dma_free_channel(ch);
+ goto out_fail;
+ }
+
+ tegra_apb_dma = ch;
+out:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return true;
+
+out_fail:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return false;
+}
+
+static void apb_dma_complete(struct tegra_dma_req *req)
+{
+ complete(&tegra_apb_wait);
+}
+
+u32 tegra_apb_readl(unsigned long offset)
+{
+ struct tegra_dma_req req;
+ int ret;
+
+ if (!tegra_apb_dma && !tegra_apb_init())
+ return readl(IO_TO_VIRT(offset));
+
+ mutex_lock(&tegra_apb_dma_lock);
+ req.complete = apb_dma_complete;
+ req.to_memory = 1;
+ req.dest_addr = tegra_apb_bb_phys;
+ req.dest_bus_width = 32;
+ req.dest_wrap = 1;
+ req.source_addr = offset;
+ req.source_bus_width = 32;
+ req.source_wrap = 4;
+ req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+ req.size = 4;
+
+ INIT_COMPLETION(tegra_apb_wait);
+
+ tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+ ret = wait_for_completion_timeout(&tegra_apb_wait,
+ msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb read dma timed out")) {
+ tegra_dma_dequeue_req(tegra_apb_dma, &req);
+ *(u32 *)tegra_apb_bb = 0;
+ }
+
+ mutex_unlock(&tegra_apb_dma_lock);
+ return *((u32 *)tegra_apb_bb);
+}
+
+void tegra_apb_writel(u32 value, unsigned long offset)
+{
+ struct tegra_dma_req req;
+ int ret;
+
+ if (!tegra_apb_dma && !tegra_apb_init()) {
+ writel(value, IO_TO_VIRT(offset));
+ return;
+ }
+
+ mutex_lock(&tegra_apb_dma_lock);
+ *((u32 *)tegra_apb_bb) = value;
+ req.complete = apb_dma_complete;
+ req.to_memory = 0;
+ req.dest_addr = offset;
+ req.dest_wrap = 4;
+ req.dest_bus_width = 32;
+ req.source_addr = tegra_apb_bb_phys;
+ req.source_bus_width = 32;
+ req.source_wrap = 1;
+ req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+ req.size = 4;
+
+ INIT_COMPLETION(tegra_apb_wait);
+
+ tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+ ret = wait_for_completion_timeout(&tegra_apb_wait,
+ msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb write dma timed out"))
+ tegra_dma_dequeue_req(tegra_apb_dma, &req);
+
+ mutex_unlock(&tegra_apb_dma_lock);
+}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
new file mode 100644
index 0000000..8b49e8c
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_APBIO_H
+#define __MACH_TEGRA_APBIO_H
+
+#ifdef CONFIG_TEGRA_SYSTEM_DMA
+
+u32 tegra_apb_readl(unsigned long offset);
+void tegra_apb_writel(u32 value, unsigned long offset);
+
+#else
+#include <asm/io.h>
+#include <mach/io.h>
+
+static inline u32 tegra_apb_readl(unsigned long offset)
+{
+ return readl(IO_TO_VIRT(offset));
+}
+
+static inline void tegra_apb_writel(u32 value, unsigned long offset)
+{
+ writel(value, IO_TO_VIRT(offset));
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 21d1285..976edfb0 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -18,18 +18,13 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/io.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
-#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board-harmony.h"
-#define PMC_CTRL 0x0
-#define PMC_CTRL_INTR_LOW (1 << 17)
-
static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
REGULATOR_SUPPLY("pex_clk", NULL),
};
@@ -114,16 +109,6 @@
int __init harmony_regulator_init(void)
{
- void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
- u32 pmc_ctrl;
-
- /*
- * Configure the power management controller to trigger PMU
- * interrupts when low
- */
- pmc_ctrl = readl(pmc + PMC_CTRL);
- writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
-
i2c_register_board_info(3, harmony_regulators, 1);
return 0;
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 789bdc9..c00aadb 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -101,7 +101,6 @@
static struct i2c_board_info __initdata wm8903_board_info = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &harmony_wm8903_pdata,
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
};
static void __init harmony_i2c_init(void)
@@ -111,6 +110,7 @@
platform_device_register(&tegra_i2c_device3);
platform_device_register(&tegra_i2c_device4);
+ wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
i2c_register_board_info(0, &wm8903_board_info, 1);
}
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index ebac65f..d669847 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -159,7 +159,6 @@
static struct i2c_board_info __initdata isl29018_device = {
I2C_BOARD_INFO("isl29018", 0x44),
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_ISL29018_IRQ),
};
static struct i2c_board_info __initdata adt7461_device = {
@@ -183,7 +182,6 @@
static struct i2c_board_info __initdata wm8903_device = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &wm8903_pdata,
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
};
static int seaboard_ehci_init(void)
@@ -214,7 +212,10 @@
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
+ isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+
+ wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb901..47ad750 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,11 +27,28 @@
#include <asm/hardware/gic.h>
#include <mach/iomap.h>
-#include <mach/system.h>
#include "board.h"
#include "clock.h"
#include "fuse.h"
+#include "pmc.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
+u32 tegra_uart_config[3] = {
+ /* Debug UART initialization required */
+ 1,
+ /* Debug UART physical address */
+ (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
+ /* Debug UART virtual address */
+ (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
+};
#ifdef CONFIG_OF
static const struct of_device_id tegra_dt_irq_match[] __initconst = {
@@ -96,15 +113,19 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ disable_hlt(); /* idle WFI usage needs to be confirmed */
+
tegra_init_fuse();
tegra2_init_clocks();
tegra_clk_init_from_table(tegra20_clk_init_table);
tegra_init_cache(0x331, 0x441);
+ tegra_pmc_init();
}
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
void __init tegra30_init_early(void)
{
tegra_init_cache(0x441, 0x551);
+ tegra_pmc_init();
}
#endif
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index c0cf967..abea4f6 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -33,6 +33,8 @@
#include <mach/iomap.h>
#include <mach/suspend.h>
+#include "apbio.h"
+
#define APB_DMA_GEN 0x000
#define GEN_ENABLE (1<<31)
@@ -50,8 +52,6 @@
#define CSR_ONCE (1<<27)
#define CSR_FLOW (1<<21)
#define CSR_REQ_SEL_SHIFT 16
-#define CSR_REQ_SEL_MASK (0x1F<<CSR_REQ_SEL_SHIFT)
-#define CSR_REQ_SEL_INVALID (31<<CSR_REQ_SEL_SHIFT)
#define CSR_WCOUNT_SHIFT 2
#define CSR_WCOUNT_MASK 0xFFFC
@@ -133,6 +133,7 @@
static bool tegra_dma_initialized;
static DEFINE_MUTEX(tegra_dma_lock);
+static DEFINE_SPINLOCK(enable_lock);
static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
@@ -180,36 +181,94 @@
static int tegra_dma_cancel(struct tegra_dma_channel *ch)
{
- u32 csr;
unsigned long irq_flags;
spin_lock_irqsave(&ch->lock, irq_flags);
while (!list_empty(&ch->list))
list_del(ch->list.next);
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_REQ_SEL_MASK;
- csr |= CSR_REQ_SEL_INVALID;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
tegra_dma_stop(ch);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return 0;
}
+static unsigned int get_channel_status(struct tegra_dma_channel *ch,
+ struct tegra_dma_req *req, bool is_stop_dma)
+{
+ void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+ unsigned int status;
+
+ if (is_stop_dma) {
+ /*
+ * STOP the DMA and get the transfer count.
+ * Getting the transfer count is tricky.
+ * - Globally disable DMA on all channels
+ * - Read the channel's status register to know the number
+ * of pending bytes to be transfered.
+ * - Stop the dma channel
+ * - Globally re-enable DMA to resume other transfers
+ */
+ spin_lock(&enable_lock);
+ writel(0, addr + APB_DMA_GEN);
+ udelay(20);
+ status = readl(ch->addr + APB_DMA_CHAN_STA);
+ tegra_dma_stop(ch);
+ writel(GEN_ENABLE, addr + APB_DMA_GEN);
+ spin_unlock(&enable_lock);
+ if (status & STA_ISE_EOC) {
+ pr_err("Got Dma Int here clearing");
+ writel(status, ch->addr + APB_DMA_CHAN_STA);
+ }
+ req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
+ } else {
+ status = readl(ch->addr + APB_DMA_CHAN_STA);
+ }
+ return status;
+}
+
+/* should be called with the channel lock held */
+static unsigned int dma_active_count(struct tegra_dma_channel *ch,
+ struct tegra_dma_req *req, unsigned int status)
+{
+ unsigned int to_transfer;
+ unsigned int req_transfer_count;
+ unsigned int bytes_transferred;
+
+ to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
+ req_transfer_count = ch->req_transfer_count + 1;
+ bytes_transferred = req_transfer_count;
+ if (status & STA_BUSY)
+ bytes_transferred -= to_transfer;
+ /*
+ * In continuous transfer mode, DMA only tracks the count of the
+ * half DMA buffer. So, if the DMA already finished half the DMA
+ * then add the half buffer to the completed count.
+ */
+ if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
+ if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
+ bytes_transferred += req_transfer_count;
+ if (status & STA_ISE_EOC)
+ bytes_transferred += req_transfer_count;
+ }
+ bytes_transferred *= 4;
+ return bytes_transferred;
+}
+
int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
struct tegra_dma_req *_req)
{
- unsigned int csr;
unsigned int status;
struct tegra_dma_req *req = NULL;
int found = 0;
unsigned long irq_flags;
- int to_transfer;
- int req_transfer_count;
+ int stop = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
+
+ if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
+ stop = 1;
+
list_for_each_entry(req, &ch->list, node) {
if (req == _req) {
list_del(&req->node);
@@ -222,47 +281,12 @@
return 0;
}
- /* STOP the DMA and get the transfer count.
- * Getting the transfer count is tricky.
- * - Change the source selector to invalid to stop the DMA from
- * FIFO to memory.
- * - Read the status register to know the number of pending
- * bytes to be transferred.
- * - Finally stop or program the DMA to the next buffer in the
- * list.
- */
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_REQ_SEL_MASK;
- csr |= CSR_REQ_SEL_INVALID;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+ if (!stop)
+ goto skip_stop_dma;
- /* Get the transfer count */
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT;
- req_transfer_count = ch->req_transfer_count;
- req_transfer_count += 1;
- to_transfer += 1;
+ status = get_channel_status(ch, req, true);
+ req->bytes_transferred = dma_active_count(ch, req, status);
- req->bytes_transferred = req_transfer_count;
-
- if (status & STA_BUSY)
- req->bytes_transferred -= to_transfer;
-
- /* In continuous transfer mode, DMA only tracks the count of the
- * half DMA buffer. So, if the DMA already finished half the DMA
- * then add the half buffer to the completed count.
- *
- * FIXME: There can be a race here. What if the req to
- * dequue happens at the same time as the DMA just moved to
- * the new buffer and SW didn't yet received the interrupt?
- */
- if (ch->mode & TEGRA_DMA_MODE_CONTINOUS)
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
- req->bytes_transferred += req_transfer_count;
-
- req->bytes_transferred *= 4;
-
- tegra_dma_stop(ch);
if (!list_empty(&ch->list)) {
/* if the list is not empty, queue the next request */
struct tegra_dma_req *next_req;
@@ -270,6 +294,8 @@
typeof(*next_req), node);
tegra_dma_update_hw(ch, next_req);
}
+
+skip_stop_dma:
req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -357,7 +383,7 @@
int channel;
struct tegra_dma_channel *ch = NULL;
- if (WARN_ON(!tegra_dma_initialized))
+ if (!tegra_dma_initialized)
return NULL;
mutex_lock(&tegra_dma_lock);
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index 1fa26d9..17fdd40 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -23,20 +23,70 @@
#include <mach/iomap.h>
#include "fuse.h"
+#include "apbio.h"
#define FUSE_UID_LOW 0x108
#define FUSE_UID_HIGH 0x10c
#define FUSE_SKU_INFO 0x110
#define FUSE_SPARE_BIT 0x200
-static inline u32 fuse_readl(unsigned long offset)
+int tegra_sku_id;
+int tegra_cpu_process_id;
+int tegra_core_process_id;
+enum tegra_revision tegra_revision;
+
+/* The BCT to use at boot is specified by board straps that can be read
+ * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
+ */
+int tegra_bct_strapping;
+
+#define STRAP_OPT 0x008
+#define GMI_AD0 (1 << 4)
+#define GMI_AD1 (1 << 5)
+#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
+#define RAM_CODE_SHIFT 4
+
+static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
+ [TEGRA_REVISION_UNKNOWN] = "unknown",
+ [TEGRA_REVISION_A01] = "A01",
+ [TEGRA_REVISION_A02] = "A02",
+ [TEGRA_REVISION_A03] = "A03",
+ [TEGRA_REVISION_A03p] = "A03 prime",
+ [TEGRA_REVISION_A04] = "A04",
+};
+
+static inline u32 tegra_fuse_readl(unsigned long offset)
{
- return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+ return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
}
-static inline void fuse_writel(u32 value, unsigned long offset)
+static inline bool get_spare_fuse(int bit)
{
- writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+ return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4);
+}
+
+static enum tegra_revision tegra_get_revision(void)
+{
+ void __iomem *chip_id = IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804;
+ u32 id = readl(chip_id);
+ u32 minor_rev = (id >> 16) & 0xf;
+ u32 chipid = (id >> 8) & 0xff;
+
+ switch (minor_rev) {
+ case 1:
+ return TEGRA_REVISION_A01;
+ case 2:
+ return TEGRA_REVISION_A02;
+ case 3:
+ if (chipid == 0x20 && (get_spare_fuse(18) || get_spare_fuse(19)))
+ return TEGRA_REVISION_A03p;
+ else
+ return TEGRA_REVISION_A03;
+ case 4:
+ return TEGRA_REVISION_A04;
+ default:
+ return TEGRA_REVISION_UNKNOWN;
+ }
}
void tegra_init_fuse(void)
@@ -45,40 +95,31 @@
reg |= 1 << 28;
writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
- pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n",
- tegra_sku_id(), tegra_cpu_process_id(),
- tegra_core_process_id());
+ reg = tegra_fuse_readl(FUSE_SKU_INFO);
+ tegra_sku_id = reg & 0xFF;
+
+ reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+ tegra_cpu_process_id = (reg >> 6) & 3;
+
+ reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+ tegra_core_process_id = (reg >> 12) & 3;
+
+ reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+ tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
+
+ tegra_revision = tegra_get_revision();
+
+ pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
+ tegra_revision_name[tegra_get_revision()],
+ tegra_sku_id, tegra_cpu_process_id,
+ tegra_core_process_id);
}
unsigned long long tegra_chip_uid(void)
{
unsigned long long lo, hi;
- lo = fuse_readl(FUSE_UID_LOW);
- hi = fuse_readl(FUSE_UID_HIGH);
+ lo = tegra_fuse_readl(FUSE_UID_LOW);
+ hi = tegra_fuse_readl(FUSE_UID_HIGH);
return (hi << 32ull) | lo;
}
-
-int tegra_sku_id(void)
-{
- int sku_id;
- u32 reg = fuse_readl(FUSE_SKU_INFO);
- sku_id = reg & 0xFF;
- return sku_id;
-}
-
-int tegra_cpu_process_id(void)
-{
- int cpu_process_id;
- u32 reg = fuse_readl(FUSE_SPARE_BIT);
- cpu_process_id = (reg >> 6) & 3;
- return cpu_process_id;
-}
-
-int tegra_core_process_id(void)
-{
- int core_process_id;
- u32 reg = fuse_readl(FUSE_SPARE_BIT);
- core_process_id = (reg >> 12) & 3;
- return core_process_id;
-}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index 584b2e2..d65d2ab 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/mach-tegra/fuse.c
- *
* Copyright (C) 2010 Google, Inc.
*
* Author:
@@ -17,8 +15,34 @@
*
*/
+#ifndef __MACH_TEGRA_FUSE_H
+#define __MACH_TEGRA_FUSE_H
+
+enum tegra_revision {
+ TEGRA_REVISION_UNKNOWN = 0,
+ TEGRA_REVISION_A01,
+ TEGRA_REVISION_A02,
+ TEGRA_REVISION_A03,
+ TEGRA_REVISION_A03p,
+ TEGRA_REVISION_A04,
+ TEGRA_REVISION_MAX,
+};
+
+#define SKU_ID_T20 8
+#define SKU_ID_T25SE 20
+#define SKU_ID_AP25 23
+#define SKU_ID_T25 24
+#define SKU_ID_AP25E 27
+#define SKU_ID_T25E 28
+
+extern int tegra_sku_id;
+extern int tegra_cpu_process_id;
+extern int tegra_core_process_id;
+extern enum tegra_revision tegra_revision;
+
+extern int tegra_bct_strapping;
+
unsigned long long tegra_chip_uid(void);
-int tegra_sku_id(void);
-int tegra_cpu_process_id(void);
-int tegra_core_process_id(void);
void tegra_init_fuse(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 619abc6..90069ab 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -1,11 +1,17 @@
/*
* arch/arm/mach-tegra/include/mach/debug-macro.S
*
- * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -18,18 +24,78 @@
*
*/
+#include <linux/serial_reg.h>
+
#include <mach/io.h>
#include <mach/iomap.h>
+#include <mach/irammap.h>
- .macro addruart, rp, rv, tmp
- ldr \rp, =IO_APB_PHYS @ physical
- ldr \rv, =IO_APB_VIRT @ virtual
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- .endm
+ .macro addruart, rp, rv, tmp
+ adr \rp, 99f @ actual addr of 99f
+ ldr \rv, [\rp] @ linked addr is stored there
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ linked tegra_uart_config
+ sub \tmp, \rp, \rv @ actual tegra_uart_config
+ ldr \rp, [\tmp] @ Load tegra_uart_config
+ cmp \rp, #1 @ needs intitialization?
+ bne 100f @ no; go load the addresses
+ mov \rv, #0 @ yes; record init is done
+ str \rv, [\tmp]
+ mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
+ movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
+ movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
+ cmp \rv, \rp @ Cookie present?
+ bne 100f @ No, use default UART
+ mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
+ str \rv, [\tmp, #4] @ Store in tegra_uart_phys
+ sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
+ add \rv, \rv, #IO_APB_VIRT
+ str \rv, [\tmp, #8] @ Store in tegra_uart_virt
+ b 100f
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .align
+99: .word .
+ .word tegra_uart_config
+ .ltorg
+100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
+ ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
+ .endm
+
+#define UART_SHIFT 2
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
+ * We use the fact that all 5 valid UART addresses all have something in the
+ * 2nd-to-lowest byte.
+ */
+
+ .macro senduart, rd, rx
+ tst \rx, #0x0000ff00
+ strneb \rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+ .endm
+
+ .macro busyuart, rd, rx
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1001b
+1002:
+ .endm
+
+ .macro waituart, rd, rx
+#ifdef FLOW_CONTROL
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+1002:
+#endif
+ .endm
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
index 87d37fd..6140820 100644
--- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -25,8 +25,6 @@
#define TEGRA_NR_GPIOS INT_GPIO_NR
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-
struct tegra_gpio_table {
int gpio; /* GPIO number */
bool enable; /* Enable for GPIO at init? */
diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/include/mach/irammap.h
new file mode 100644
index 0000000..0cbe632
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/irammap.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_IRAMMAP_H
+#define __MACH_TEGRA_IRAMMAP_H
+
+#include <asm/sizes.h>
+
+/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
+#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
+#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
+
+/*
+ * These locations are written to by uncompress.h, and read by debug-macro.S.
+ * The first word holds the cookie value if the data is valid. The second
+ * word holds the UART physical address.
+ */
+#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K
+#define TEGRA_IRAM_DEBUG_UART_SIZE 8
+#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988..0000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 4e83237..5a440f3 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -2,10 +2,14 @@
* arch/arm/mach-tegra/include/mach/uncompress.h
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -25,36 +29,130 @@
#include <linux/serial_reg.h>
#include <mach/iomap.h>
+#include <mach/irammap.h>
+
+#define BIT(x) (1 << (x))
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+#define DEBUG_UART_SHIFT 2
+
+volatile u8 *uart;
static void putc(int c)
{
- volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
- int shift = 2;
-
if (uart == NULL)
return;
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+ while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
barrier();
- uart[UART_TX << shift] = c;
+ uart[UART_TX << DEBUG_UART_SHIFT] = c;
}
static inline void flush(void)
{
}
+static inline void save_uart_address(void)
+{
+ u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
+
+ if (uart) {
+ buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
+ buf[1] = (u32)uart;
+ } else
+ buf[0] = 0;
+}
+
+/*
+ * Setup before decompression. This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
static inline void arch_decomp_setup(void)
{
- volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
- int shift = 2;
+ static const struct {
+ u32 base;
+ u32 reset_reg;
+ u32 clock_reg;
+ u32 bit;
+ } uarts[] = {
+ {
+ TEGRA_UARTA_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 6,
+ },
+ {
+ TEGRA_UARTB_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 7,
+ },
+ {
+ TEGRA_UARTC_BASE,
+ TEGRA_CLK_RESET_BASE + 0x08,
+ TEGRA_CLK_RESET_BASE + 0x14,
+ 23,
+ },
+ {
+ TEGRA_UARTD_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 1,
+ },
+ {
+ TEGRA_UARTE_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 2,
+ },
+ };
+ int i;
+ volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+ u32 chip, div;
+ /*
+ * Look for the first UART that:
+ * a) Is not in reset.
+ * b) Is clocked.
+ * c) Has a 'D' in the scratchpad register.
+ *
+ * Note that on Tegra30, the first two conditions are required, since
+ * if not true, accesses to the UART scratch register will hang.
+ * Tegra20 doesn't have this issue.
+ *
+ * The intent is that the bootloader will tell the kernel which UART
+ * to use by setting up those conditions. If nothing found, we'll fall
+ * back to what's specified in TEGRA_DEBUG_UART_BASE.
+ */
+ for (i = 0; i < ARRAY_SIZE(uarts); i++) {
+ if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+ continue;
+
+ if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ continue;
+
+ uart = (volatile u8 *)uarts[i].base;
+ if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
+ continue;
+
+ break;
+ }
+ if (i == ARRAY_SIZE(uarts))
+ uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+ save_uart_address();
if (uart == NULL)
return;
- uart[UART_LCR << shift] |= UART_LCR_DLAB;
- uart[UART_DLL << shift] = 0x75;
- uart[UART_DLM << shift] = 0x0;
- uart[UART_LCR << shift] = 3;
+ chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
+ if (chip == 0x20)
+ div = 0x0075;
+ else
+ div = 0x00dd;
+
+ uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
+ uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
+ uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
+ uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
}
static inline void arch_decomp_wdog(void)
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
new file mode 100644
index 0000000..7af6a54
--- /dev/null
+++ b/arch/arm/mach-tegra/pmc.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <mach/iomap.h>
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_INTR_LOW (1 << 17)
+
+static inline u32 tegra_pmc_readl(u32 reg)
+{
+ return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+static inline void tegra_pmc_writel(u32 val, u32 reg)
+{
+ writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id matches[] __initconst = {
+ { .compatible = "nvidia,tegra20-pmc" },
+ { }
+};
+#endif
+
+void __init tegra_pmc_init(void)
+{
+ /*
+ * For now, Harmony is the only board that uses the PMC, and it wants
+ * the signal inverted. Seaboard would too if it used the PMC.
+ * Hopefully by the time other boards want to use the PMC, everything
+ * will be device-tree, or they also want it inverted.
+ */
+ bool invert_interrupt = true;
+ u32 val;
+
+#ifdef CONFIG_OF
+ if (of_have_populated_dt()) {
+ struct device_node *np;
+
+ invert_interrupt = false;
+
+ np = of_find_matching_node(NULL, matches);
+ if (np) {
+ if (of_find_property(np, "nvidia,invert-interrupt",
+ NULL))
+ invert_interrupt = true;
+ }
+ }
+#endif
+
+ val = tegra_pmc_readl(PMC_CTRL);
+ if (invert_interrupt)
+ val |= PMC_CTRL_INTR_LOW;
+ else
+ val &= ~PMC_CTRL_INTR_LOW;
+ tegra_pmc_writel(val, PMC_CTRL);
+}
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-tegra/pmc.h
similarity index 69%
rename from arch/arm/mach-highbank/include/mach/system.h
rename to arch/arm/mach-tegra/pmc.h
index b1d8b5f..8995ee4 100644
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -10,15 +10,14 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
*/
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
+#ifndef __MACH_TEGRA_PMC_H
+#define __MACH_TEGRA_PMC_H
+
+void tegra_pmc_init(void);
#endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index ff9e6b6..74d314f 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -720,7 +720,7 @@
{
tegra2_pll_clk_init(c);
- if (tegra_sku_id() == 7)
+ if (tegra_sku_id == 7)
c->max_rate = 750000000;
}
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 0f7ae6e..5070d83 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -16,14 +16,19 @@
*/
#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tegra_emc.h>
#include <mach/iomap.h>
#include "tegra2_emc.h"
+#include "fuse.h"
#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
static bool emc_enable = true;
@@ -32,18 +37,17 @@
#endif
module_param(emc_enable, bool, 0644);
-static void __iomem *emc = IO_ADDRESS(TEGRA_EMC_BASE);
-static const struct tegra_emc_table *tegra_emc_table;
-static int tegra_emc_table_size;
+static struct platform_device *emc_pdev;
+static void __iomem *emc_regbase;
static inline void emc_writel(u32 val, unsigned long addr)
{
- writel(val, emc + addr);
+ writel(val, emc_regbase + addr);
}
static inline u32 emc_readl(unsigned long addr)
{
- return readl(emc + addr);
+ return readl(emc_regbase + addr);
}
static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
@@ -98,15 +102,15 @@
/* Select the closest EMC rate that is higher than the requested rate */
long tegra_emc_round_rate(unsigned long rate)
{
+ struct tegra_emc_pdata *pdata;
int i;
int best = -1;
unsigned long distance = ULONG_MAX;
- if (!tegra_emc_table)
+ if (!emc_pdev)
return -EINVAL;
- if (!emc_enable)
- return -EINVAL;
+ pdata = emc_pdev->dev.platform_data;
pr_debug("%s: %lu\n", __func__, rate);
@@ -116,10 +120,10 @@
*/
rate = rate / 2 / 1000;
- for (i = 0; i < tegra_emc_table_size; i++) {
- if (tegra_emc_table[i].rate >= rate &&
- (tegra_emc_table[i].rate - rate) < distance) {
- distance = tegra_emc_table[i].rate - rate;
+ for (i = 0; i < pdata->num_tables; i++) {
+ if (pdata->tables[i].rate >= rate &&
+ (pdata->tables[i].rate - rate) < distance) {
+ distance = pdata->tables[i].rate - rate;
best = i;
}
}
@@ -127,9 +131,9 @@
if (best < 0)
return -EINVAL;
- pr_debug("%s: using %lu\n", __func__, tegra_emc_table[best].rate);
+ pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate);
- return tegra_emc_table[best].rate * 2 * 1000;
+ return pdata->tables[best].rate * 2 * 1000;
}
/*
@@ -142,37 +146,211 @@
*/
int tegra_emc_set_rate(unsigned long rate)
{
+ struct tegra_emc_pdata *pdata;
int i;
int j;
- if (!tegra_emc_table)
+ if (!emc_pdev)
return -EINVAL;
+ pdata = emc_pdev->dev.platform_data;
+
/*
* The EMC clock rate is twice the bus rate, and the bus rate is
* measured in kHz
*/
rate = rate / 2 / 1000;
- for (i = 0; i < tegra_emc_table_size; i++)
- if (tegra_emc_table[i].rate == rate)
+ for (i = 0; i < pdata->num_tables; i++)
+ if (pdata->tables[i].rate == rate)
break;
- if (i >= tegra_emc_table_size)
+ if (i >= pdata->num_tables)
return -EINVAL;
pr_debug("%s: setting to %lu\n", __func__, rate);
for (j = 0; j < TEGRA_EMC_NUM_REGS; j++)
- emc_writel(tegra_emc_table[i].regs[j], emc_reg_addr[j]);
+ emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]);
- emc_readl(tegra_emc_table[i].regs[TEGRA_EMC_NUM_REGS - 1]);
+ emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]);
return 0;
}
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size)
+#ifdef CONFIG_OF
+static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np)
{
- tegra_emc_table = table;
- tegra_emc_table_size = table_size;
+ struct device_node *iter;
+ u32 reg;
+
+ for_each_child_of_node(np, iter) {
+ if (of_property_read_u32(np, "nvidia,ram-code", ®))
+ continue;
+ if (reg == tegra_bct_strapping)
+ return of_node_get(iter);
+ }
+
+ return NULL;
}
+
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *tnp, *iter;
+ struct tegra_emc_pdata *pdata;
+ int ret, i, num_tables;
+
+ if (!np)
+ return NULL;
+
+ if (of_find_property(np, "nvidia,use-ram-code", NULL)) {
+ tnp = tegra_emc_ramcode_devnode(np);
+ if (!tnp)
+ dev_warn(&pdev->dev,
+ "can't find emc table for ram-code 0x%02x\n",
+ tegra_bct_strapping);
+ } else
+ tnp = of_node_get(np);
+
+ if (!tnp)
+ return NULL;
+
+ num_tables = 0;
+ for_each_child_of_node(tnp, iter)
+ if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table"))
+ num_tables++;
+
+ if (!num_tables) {
+ pdata = NULL;
+ goto out;
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata->tables = devm_kzalloc(&pdev->dev,
+ sizeof(*pdata->tables) * num_tables,
+ GFP_KERNEL);
+
+ i = 0;
+ for_each_child_of_node(tnp, iter) {
+ u32 prop;
+
+ ret = of_property_read_u32(iter, "clock-frequency", &prop);
+ if (ret) {
+ dev_err(&pdev->dev, "no clock-frequency in %s\n",
+ iter->full_name);
+ continue;
+ }
+ pdata->tables[i].rate = prop;
+
+ ret = of_property_read_u32_array(iter, "nvidia,emc-registers",
+ pdata->tables[i].regs,
+ TEGRA_EMC_NUM_REGS);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "malformed emc-registers property in %s\n",
+ iter->full_name);
+ continue;
+ }
+
+ i++;
+ }
+ pdata->num_tables = i;
+
+out:
+ of_node_put(tnp);
+ return pdata;
+}
+#else
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
+static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev)
+{
+ struct clk *c = clk_get_sys(NULL, "emc");
+ struct tegra_emc_pdata *pdata;
+ unsigned long khz;
+ int i;
+
+ WARN_ON(pdev->dev.platform_data);
+ BUG_ON(IS_ERR_OR_NULL(c));
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
+ GFP_KERNEL);
+
+ pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000;
+
+ for (i = 0; i < TEGRA_EMC_NUM_REGS; i++)
+ pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]);
+
+ pdata->num_tables = 1;
+
+ khz = pdata->tables[0].rate;
+ dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, "
+ "%ld kHz mem\n", khz * 2, khz);
+
+ return pdata;
+}
+
+static int __devinit tegra_emc_probe(struct platform_device *pdev)
+{
+ struct tegra_emc_pdata *pdata;
+ struct resource *res;
+
+ if (!emc_enable) {
+ dev_err(&pdev->dev, "disabled per module parameter\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing register base\n");
+ return -ENOMEM;
+ }
+
+ emc_regbase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!emc_regbase) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ return -ENOMEM;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ pdata = tegra_emc_dt_parse_pdata(pdev);
+
+ if (!pdata)
+ pdata = tegra_emc_fill_pdata(pdev);
+
+ pdev->dev.platform_data = pdata;
+
+ emc_pdev = pdev;
+
+ return 0;
+}
+
+static struct of_device_id tegra_emc_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-emc", },
+ { },
+};
+
+static struct platform_driver tegra_emc_driver = {
+ .driver = {
+ .name = "tegra-emc",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_emc_of_match,
+ },
+ .probe = tegra_emc_probe,
+};
+
+static int __init tegra_emc_init(void)
+{
+ return platform_driver_register(&tegra_emc_driver);
+}
+device_initcall(tegra_emc_init);
diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h
index 19f08cb..f61409b 100644
--- a/arch/arm/mach-tegra/tegra2_emc.h
+++ b/arch/arm/mach-tegra/tegra2_emc.h
@@ -15,13 +15,10 @@
*
*/
-#define TEGRA_EMC_NUM_REGS 46
-
-struct tegra_emc_table {
- unsigned long rate;
- u32 regs[TEGRA_EMC_NUM_REGS];
-};
+#ifndef __MACH_TEGRA_TEGRA2_EMC_H_
+#define __MACH_TEGRA_TEGRA2_EMC_H
int tegra_emc_set_rate(unsigned long rate);
long tegra_emc_round_rate(unsigned long rate);
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926..b986560 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -94,19 +94,9 @@
#endif
};
-static struct amba_device uart0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart0", /* Slow device at 0x3000 offset */
- .platform_data = &uart0_plat_data,
- },
- .res = {
- .start = U300_UART0_BASE,
- .end = U300_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+ { IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@
#endif
};
-static struct amba_device uart1_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart1", /* Fast device at 0x7000 offset */
- .platform_data = &uart1_plat_data,
- },
- .res = {
- .start = U300_UART1_BASE,
- .end = U300_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+ { IRQ_U300_UART1 }, &uart1_plat_data);
#endif
-static struct amba_device pl172_device = {
- .dev = {
- .init_name = "pl172", /* AHB device at 0x4000 offset */
- .platform_data = NULL,
- },
- .res = {
- .start = U300_EMIF_CFG_BASE,
- .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
/*
* Everything within this next ifdef deals with external devices connected to
* the APP SPI bus.
*/
-static struct amba_device pl022_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "pl022", /* Fast device at 0x6000 offset */
- },
- .res = {
- .start = U300_SPI_BASE,
- .end = U300_SPI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_SPI, NO_IRQ },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+ { IRQ_U300_SPI }, NULL);
-static struct amba_device mmcsd_device = {
- .dev = {
- .init_name = "mmci", /* Fast device at 0x1000 offset */
- .platform_data = NULL, /* Added later */
- },
- .res = {
- .start = U300_MMCSD_BASE,
- .end = U300_MMCSD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+ U300_MMCSD_IRQS, NULL);
/*
* The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e..0000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..898a645 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -26,29 +26,22 @@
struct amba_device *dev;
int ret;
- dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ dev = amba_device_alloc(name, base, SZ_4K);
if (!dev)
return ERR_PTR(-ENOMEM);
- dev->dev.init_name = name;
-
- dev->res.start = base;
- dev->res.end = base + SZ_4K - 1;
- dev->res.flags = IORESOURCE_MEM;
-
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
- dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- kfree(dev);
+ amba_device_put(dev);
return ERR_PTR(ret);
}
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c9..0000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 02b7b93..0968772 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -98,8 +98,11 @@
void __init versatile_init_irq(void)
{
- vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
- irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START);
+ struct device_node *np;
+
+ np = of_find_matching_node_by_address(NULL, vic_of_match,
+ VERSATILE_VIC_BASE);
+ __vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
@@ -582,58 +585,58 @@
.num_chipselect = 1,
};
-#define AACI_IRQ { IRQ_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_AACI }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_SIC_KMI0 }
+#define KMI1_IRQ { IRQ_SIC_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ { }
+#define MPMC_IRQ { }
+#define CLCD_IRQ { IRQ_CLCDINT }
+#define DMAC_IRQ { IRQ_DMAINT }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ { }
+#define WATCHDOG_IRQ { IRQ_WDOGINT }
+#define GPIO0_IRQ { IRQ_GPIOINT0 }
+#define GPIO1_IRQ { IRQ_GPIOINT1 }
+#define RTC_IRQ { IRQ_RTCINT }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ { IRQ_SCIINT }
+#define UART0_IRQ { IRQ_UARTINT0 }
+#define UART1_IRQ { IRQ_UARTINT1 }
+#define UART2_IRQ { IRQ_UARTINT2 }
+#define SSP_IRQ { IRQ_SSPINT }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+APB_DEVICE(aaci, "fpga:04", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:07", KMI1, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:00", SMC, NULL);
+AHB_DEVICE(mpmc, "dev:10", MPMC, NULL);
+AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:30", DMAC, NULL);
+APB_DEVICE(sctl, "dev:e0", SCTL, NULL);
+APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+APB_DEVICE(rtc, "dev:e8", RTC, NULL);
+APB_DEVICE(sci0, "dev:f0", SCI, NULL);
+APB_DEVICE(uart0, "dev:f1", UART0, NULL);
+APB_DEVICE(uart1, "dev:f2", UART1, NULL);
+APB_DEVICE(uart2, "dev:f3", UART2, NULL);
+APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f55..683e607 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@
extern struct of_dev_auxdata versatile_auxdata_lookup[];
#endif
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = VERSATILE_##base##_BASE, \
- .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#endif
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347..0000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c19..1973833 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@
.irq_base = IRQ_GPIO3_START,
};
-#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ { IRQ_SIC_UART3 }
+#define SCI1_IRQ { IRQ_SIC_SCI3 }
#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_GPIOINT2 }
+#define GPIO3_IRQ { IRQ_GPIOINT3 }
/*
* These devices are connected via the DMA APB bridge
*/
/* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
-AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
-AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3, NULL);
+APB_DEVICE(sci1, "fpga:0a", SCI1, NULL);
+APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f439715..9f0f282 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,2 @@
#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat) \
-struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0UL, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = base, \
- .end = base + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0UL, \
- .irq = IRQ_##base, \
- /* .dma = DMA_##base,*/ \
-}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c1..1b1d2e4 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -109,10 +109,10 @@
.remove = versatile_clcd_remove_dma,
};
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4..a40468f 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -35,7 +35,7 @@
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
-#define IRQ_CT_CA9X4_DMC { -1 }
+#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e..0000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca..ad64f97 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -266,16 +266,16 @@
.status = v2m_mmci_status,
};
-static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL);
-static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL);
-static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757e..58fa801 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
/* PM Software Reset request register */
#define VT8500_PMSR_VIRT 0xf8130060
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110be..db82568 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@
void __init nuc900_board_init(struct platform_device **device, int size)
{
+ disable_hlt();
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb93..0000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b..0000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 8cced35..0e51fc3 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -73,13 +73,13 @@
return -ENOMEM;
if (audmux_clk)
- clk_enable(audmux_clk);
+ clk_prepare_enable(audmux_clk);
ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
if (audmux_clk)
- clk_disable(audmux_clk);
+ clk_disable_unprepare(audmux_clk);
ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
pdcr, ptcr);
@@ -172,13 +172,13 @@
return -ENOSYS;
if (audmux_clk)
- clk_enable(audmux_clk);
+ clk_prepare_enable(audmux_clk);
writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
if (audmux_clk)
- clk_disable(audmux_clk);
+ clk_disable_unprepare(audmux_clk);
return 0;
}
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
index d8a56ae..ade4a1c 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -60,9 +60,9 @@
dev_err(dev, "no sata clock.\n");
return PTR_ERR(sata_clk);
}
- ret = clk_enable(sata_clk);
+ ret = clk_prepare_enable(sata_clk);
if (ret) {
- dev_err(dev, "can't enable sata clock.\n");
+ dev_err(dev, "can't prepare/enable sata clock.\n");
goto put_sata_clk;
}
@@ -73,9 +73,9 @@
ret = PTR_ERR(sata_ref_clk);
goto release_sata_clk;
}
- ret = clk_enable(sata_ref_clk);
+ ret = clk_prepare_enable(sata_ref_clk);
if (ret) {
- dev_err(dev, "can't enable sata ref clock.\n");
+ dev_err(dev, "can't prepare/enable sata ref clock.\n");
goto put_sata_ref_clk;
}
@@ -104,11 +104,11 @@
return 0;
release_sata_ref_clk:
- clk_disable(sata_ref_clk);
+ clk_disable_unprepare(sata_ref_clk);
put_sata_ref_clk:
clk_put(sata_ref_clk);
release_sata_clk:
- clk_disable(sata_clk);
+ clk_disable_unprepare(sata_clk);
put_sata_clk:
clk_put(sata_clk);
@@ -117,10 +117,10 @@
static void imx_sata_exit(struct device *dev)
{
- clk_disable(sata_ref_clk);
+ clk_disable_unprepare(sata_ref_clk);
clk_put(sata_ref_clk);
- clk_disable(sata_clk);
+ clk_disable_unprepare(sata_clk);
clk_put(sata_clk);
}
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index d3467f8..9129c9e 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -203,7 +203,7 @@
void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
- clk_enable(timer_clk);
+ clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 94b60dd4..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/*
- * These symbols are used by drivers/net/cs89x0.c.
- * This is ugly as hell, but we have to provide them until
- * someone fixed the driver.
- */
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE 0x020000
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 6e192c4..8ddda36 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,7 +24,7 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
index 233d0a5..1b90803 100644
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -60,8 +60,7 @@
static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
{
- return !strcmp(dev_name(chan->device->dev), "imx31-sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx35-sdma") ||
+ return strstr(dev_name(chan->device->dev), "sdma") ||
!strcmp(dev_name(chan->device->dev), "imx-dma");
}
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df..0000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index e032717..c0cab22 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -132,7 +132,7 @@
int rc = 0;
if (!pwm->clk_enabled) {
- rc = clk_enable(pwm->clk);
+ rc = clk_prepare_enable(pwm->clk);
if (!rc)
pwm->clk_enabled = 1;
}
@@ -145,7 +145,7 @@
writel(0, pwm->mmio_base + MX3_PWMCR);
if (pwm->clk_enabled) {
- clk_disable(pwm->clk);
+ clk_disable_unprepare(pwm->clk);
pwm->clk_enabled = 0;
}
}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 3599bf2..f30dcac 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -48,7 +48,7 @@
clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
- clk_enable(clk);
+ clk_prepare_enable(clk);
wcr_enable = (1 << 2);
}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 1c96cdb..7daf7c9 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -283,7 +283,7 @@
{
uint32_t tctl_val;
- clk_enable(timer_clk);
+ clk_prepare_enable(timer_clk);
timer_base = base;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6470101..9e8e63d 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -484,7 +484,6 @@
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
- * @vdd_name: voltage domain name
* @voltdm: pointer to voltage domain (filled in at runtime)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
@@ -528,7 +527,6 @@
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
struct clockdomain *clkdm;
- char *vdd_name;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd7..0000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda..32a0993 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
@@ -190,8 +191,34 @@
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 95e6819..037b448 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -53,7 +53,7 @@
* elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
* such directly equating the two source clocks is impossible.
*/
-struct clk clk_mpllref = {
+static struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
};
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index c496b35..139c050 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -200,7 +200,7 @@
#endif
};
-int __init s5p_init_irq_eint(void)
+static int __init s5p_init_irq_eint(void)
{
int irq;
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 1fdfaa4..82c7311 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -41,7 +41,7 @@
void (*handler)(unsigned int, struct irq_desc *);
};
-LIST_HEAD(banks);
+static LIST_HEAD(banks);
static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
{
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index d21d744..d322ba8 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -744,17 +744,6 @@
};
#endif /* CONFIG_PLAT_S3C24XX */
-#ifdef CONFIG_CPU_S3C2440
-struct platform_device s3c2412_device_iis = {
- .name = "s3c2412-iis",
- .id = -1,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
/* IDE CFCON */
#ifdef CONFIG_SAMSUNG_DEV_IDE
@@ -1078,7 +1067,7 @@
DEFINE_RES_IRQ(IRQ_PMU)
};
-struct platform_device s5p_device_pmu = {
+static struct platform_device s5p_device_pmu = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = ARRAY_SIZE(s5p_pmu_resource),
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 0747c77..301d9c3 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -116,7 +116,7 @@
return dmaengine_terminate_all((struct dma_chan *)ch);
}
-struct samsung_dma_ops dmadev_ops = {
+static struct samsung_dma_ops dmadev_ops = {
.request = samsung_dmadev_request,
.release = samsung_dmadev_release,
.prepare = samsung_dmadev_prepare,
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index c5eaad5..0670f37 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -82,6 +82,22 @@
DMACH_SLIMBUS4_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
+ DMACH_MIPI_HSI0,
+ DMACH_MIPI_HSI1,
+ DMACH_MIPI_HSI2,
+ DMACH_MIPI_HSI3,
+ DMACH_MIPI_HSI4,
+ DMACH_MIPI_HSI5,
+ DMACH_MIPI_HSI6,
+ DMACH_MIPI_HSI7,
+ DMACH_MTOM_0,
+ DMACH_MTOM_1,
+ DMACH_MTOM_2,
+ DMACH_MTOM_3,
+ DMACH_MTOM_4,
+ DMACH_MTOM_5,
+ DMACH_MTOM_6,
+ DMACH_MTOM_7,
/* END Marker, also used to denote a reserved channel */
DMACH_MAX,
};
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 30b7cc1..0f8263e 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -18,51 +18,54 @@
#define S3C2410_INTP_ALM (1 << 1)
#define S3C2410_INTP_TIC (1 << 0)
-#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-#define S3C64XX_RTCCON_TICEN (1<<8)
+#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN (1 << 0)
+#define S3C2410_RTCCON_CNTSEL (1 << 2)
+#define S3C2410_RTCCON_CLKRST (1 << 3)
+#define S3C2443_RTCCON_TICSEL (1 << 4)
+#define S3C64XX_RTCCON_TICEN (1 << 8)
-#define S3C64XX_RTCCON_TICMSK (0xF<<7)
-#define S3C64XX_RTCCON_TICSHT (7)
+#define S3C2410_TICNT S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE (1 << 7)
-#define S3C2410_TICNT S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE (1<<7)
+/* S3C2443: tick count is 15 bit wide
+ * TICNT[6:0] contains upper 7 bits
+ * TICNT1[7:0] contains lower 8 bits
+ */
+#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8)
+#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C)
+#define S3C2443_TICNT1_PART(x) (x & 0xff)
-#define S3C2410_RTCALM S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN (1<<4)
-#define S3C2410_RTCALM_DAYEN (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN (1<<1)
-#define S3C2410_RTCALM_SECEN (1<<0)
+/* S3C2416: tick count is 32 bit wide
+ * TICNT[6:0] contains bits [14:8]
+ * TICNT1[7:0] contains lower 8 bits
+ * TICNT2[16:0] contains upper 17 bits
+ */
+#define S3C2416_TICNT2 S3C2410_RTCREG(0x48)
+#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15)
-#define S3C2410_RTCALM_ALL \
- S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
- S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
- S3C2410_RTCALM_SECEN
+#define S3C2410_RTCALM S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN (1 << 6)
+#define S3C2410_RTCALM_YEAREN (1 << 5)
+#define S3C2410_RTCALM_MONEN (1 << 4)
+#define S3C2410_RTCALM_DAYEN (1 << 3)
+#define S3C2410_RTCALM_HOUREN (1 << 2)
+#define S3C2410_RTCALM_MINEN (1 << 1)
+#define S3C2410_RTCALM_SECEN (1 << 0)
+#define S3C2410_ALMSEC S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c)
-#define S3C2410_ALMSEC S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c)
+#define S3C2410_ALMDATE S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68)
-#define S3C2410_ALMDATE S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88)
-
+#define S3C2410_RTCSEC S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCMON S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88)
#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h
new file mode 100644
index 0000000..21d8594
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/rtc-core.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_RTC_CORE_H
+#define __ASM_PLAT_RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
+ s3c_device_rtc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_RTC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index f82f888..317e246 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -40,6 +40,7 @@
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @clk_type: Type of clock divider method (see clk_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
@@ -63,6 +64,7 @@
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
+ unsigned int host_caps2;
unsigned int pm_caps;
enum cd_types cd_type;
enum clk_types clk_type;
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 0f70718..fa78aa7 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -53,6 +53,8 @@
set->cfg_gpio = pd->cfg_gpio;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
+ if (pd->host_caps2)
+ set->host_caps2 |= pd->host_caps2;
if (pd->pm_caps)
set->pm_caps |= pd->pm_caps;
if (pd->clk_type)
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83..0000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 8181293..16a24b1 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -30,9 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 26e67f0..3c64b28 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -12,6 +12,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_MEMBLOCK
select HAVE_SPARSE_IRQ
+ select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h
index a6ae3c9..f13b78d 100644
--- a/arch/c6x/include/asm/irq.h
+++ b/arch/c6x/include/asm/irq.h
@@ -13,6 +13,7 @@
#ifndef _ASM_C6X_IRQ_H
#define _ASM_C6X_IRQ_H
+#include <linux/irqdomain.h>
#include <linux/threads.h>
#include <linux/list.h>
#include <linux/radix-tree.h>
@@ -41,253 +42,9 @@
/* This number is used when no interrupt has been assigned */
#define NO_IRQ 0
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are fairly agnostic to the fact that
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart host->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-struct irq_host;
-struct radix_tree_root;
-struct device_node;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
- /* Match an interrupt controller device node to a host, returns
- * 1 on a match
- */
- int (*match)(struct irq_host *h, struct device_node *node);
-
- /* Create or update a mapping between a virtual irq number and a hw
- * irq number. This is called only once for a given mapping.
- */
- int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
- /* Dispose of such a mapping */
- void (*unmap)(struct irq_host *h, unsigned int virq);
-
- /* Translate device-tree interrupt specifier from raw format coming
- * from the firmware to a irq_hw_number_t (interrupt line number) and
- * type (sense) that can be passed to set_irq_type(). In the absence
- * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
- * will return the hw number in the first cell and IRQ_TYPE_NONE for
- * the type (which amount to keeping whatever default value the
- * interrupt controller has for that line)
- */
- int (*xlate)(struct irq_host *h, struct device_node *ctrler,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
- struct list_head link;
-
- /* type of reverse mapping technique */
- unsigned int revmap_type;
-#define IRQ_HOST_MAP_PRIORITY 0 /* core priority irqs, get irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE 3 /* radix tree */
- union {
- struct {
- unsigned int size;
- unsigned int *revmap;
- } linear;
- struct radix_tree_root tree;
- } revmap_data;
- struct irq_host_ops *ops;
- void *host_data;
- irq_hw_number_t inval_irq;
-
- /* Optional device node pointer */
- struct device_node *of_node;
-};
-
struct irq_data;
extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
-extern bool virq_is_host(unsigned int virq, struct irq_host *host);
-
-/**
- * irq_alloc_host - Allocate a new irq_host data structure
- * @of_node: optional device-tree node of the interrupt controller
- * @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
- * @ops: map/unmap host callbacks
- * @inval_irq: provide a hw number in that host space that is always invalid
- *
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
- * for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
- * later during boot automatically (the reverse mapping will use the slow path
- * until that happens).
- */
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
- unsigned int revmap_type,
- unsigned int revmap_arg,
- struct irq_host_ops *ops,
- irq_hw_number_t inval_irq);
-
-
-/**
- * irq_find_host - Locates a host for a given device node
- * @node: device-tree node of the interrupt controller
- */
-extern struct irq_host *irq_find_host(struct device_node *node);
-
-
-/**
- * irq_set_default_host - Set a "default" host
- * @host: default host pointer
- *
- * For convenience, it's possible to set a "default" host that will be used
- * whenever NULL is passed to irq_create_mapping(). It makes life easier for
- * platforms that want to manipulate a few hard coded interrupt numbers that
- * aren't properly represented in the device-tree.
- */
-extern void irq_set_default_host(struct irq_host *host);
-
-
-/**
- * irq_set_virq_count - Set the maximum number of virt irqs
- * @count: number of linux virtual irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-extern void irq_set_virq_count(unsigned int count);
-
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-extern void irq_dispose_mapping(unsigned int virq);
-
-/**
- * irq_find_mapping - Find a linux virq from an hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a slow path, for use by generic code. It's expected that an
- * irq controller implementation directly calls the appropriate low level
- * mapping function.
- */
-extern unsigned int irq_find_mapping(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-/**
- * irq_create_direct_mapping - Allocate a virq for direct mapping
- * @host: host to allocate the virq for or NULL for default host
- *
- * This routine is used for irq controllers which can choose the hardware
- * interrupt numbers they generate. In such a case it's simplest to use
- * the linux virq as the hardware interrupt number.
- */
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
-
-/**
- * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
- * @host: host owning this hardware interrupt
- * @virq: linux irq number
- * @hwirq: hardware irq number in that host space
- *
- * This is for use by irq controllers that use a radix tree reverse
- * mapping for fast lookup.
- */
-extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq);
-
-/**
- * irq_radix_revmap_lookup - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses radix tree
- * revmaps
- */
-extern unsigned int irq_radix_revmap_lookup(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-/**
- * irq_linear_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses linear
- * revmaps. It does fallback to the slow path if the revmap doesn't exist
- * yet and will create the revmap entry with appropriate locking
- */
-
-extern unsigned int irq_linear_revmap(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-
-
-/**
- * irq_alloc_virt - Allocate virtual irq numbers
- * @host: host owning these new virtual irqs
- * @count: number of consecutive numbers to allocate
- * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
- *
- * This is a low level function that is used internally by irq_create_mapping()
- * and that can be used by some irq controllers implementations for things
- * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
- */
-extern unsigned int irq_alloc_virt(struct irq_host *host,
- unsigned int count,
- unsigned int hint);
-
-/**
- * irq_free_virt - Free virtual irq numbers
- * @virq: virtual irq number of the first interrupt to free
- * @count: number of interrupts to free
- *
- * This function is the opposite of irq_alloc_virt. It will not clear reverse
- * maps, this should be done previously by unmap'ing the interrupt. In fact,
- * all interrupts covered by the range being freed should have been unmapped
- * prior to calling this.
- */
-extern void irq_free_virt(unsigned int virq, unsigned int count);
extern void __init init_pic_c64xplus(void);
diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c
index 0929e4b..d77bcfd 100644
--- a/arch/c6x/kernel/irq.c
+++ b/arch/c6x/kernel/irq.c
@@ -73,10 +73,10 @@
set_irq_regs(old_regs);
}
-static struct irq_host *core_host;
+static struct irq_domain *core_domain;
-static int core_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
+static int core_domain_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
{
if (hw < 4 || hw >= NR_PRIORITY_IRQS)
return -EINVAL;
@@ -86,8 +86,9 @@
return 0;
}
-static struct irq_host_ops core_host_ops = {
- .map = core_host_map,
+static const struct irq_domain_ops core_domain_ops = {
+ .map = core_domain_map,
+ .xlate = irq_domain_xlate_onecell,
};
void __init init_IRQ(void)
@@ -100,10 +101,11 @@
np = of_find_compatible_node(NULL, NULL, "ti,c64x+core-pic");
if (np != NULL) {
/* create the core host */
- core_host = irq_alloc_host(np, IRQ_HOST_MAP_PRIORITY, 0,
- &core_host_ops, 0);
- if (core_host)
- irq_set_default_host(core_host);
+ core_domain = irq_domain_add_legacy(np, NR_PRIORITY_IRQS,
+ 0, 0, &core_domain_ops,
+ NULL);
+ if (core_domain)
+ irq_set_default_host(core_domain);
of_node_put(np);
}
@@ -128,601 +130,15 @@
return 0;
}
-/*
- * IRQ controller and virtual interrupts
- */
-
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
- irq_hw_number_t hwirq;
- struct irq_host *host;
-};
-
-static LIST_HEAD(irq_hosts);
-static DEFINE_RAW_SPINLOCK(irq_big_lock);
-static DEFINE_MUTEX(revmap_trees_mutex);
-static struct irq_map_entry irq_map[NR_IRQS];
-static unsigned int irq_virq_count = NR_IRQS;
-static struct irq_host *irq_default_host;
-
irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
{
- return irq_map[d->irq].hwirq;
+ return d->hwirq;
}
EXPORT_SYMBOL_GPL(irqd_to_hwirq);
irq_hw_number_t virq_to_hw(unsigned int virq)
{
- return irq_map[virq].hwirq;
+ struct irq_data *irq_data = irq_get_irq_data(virq);
+ return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
}
EXPORT_SYMBOL_GPL(virq_to_hw);
-
-bool virq_is_host(unsigned int virq, struct irq_host *host)
-{
- return irq_map[virq].host == host;
-}
-EXPORT_SYMBOL_GPL(virq_is_host);
-
-static int default_irq_host_match(struct irq_host *h, struct device_node *np)
-{
- return h->of_node != NULL && h->of_node == np;
-}
-
-struct irq_host *irq_alloc_host(struct device_node *of_node,
- unsigned int revmap_type,
- unsigned int revmap_arg,
- struct irq_host_ops *ops,
- irq_hw_number_t inval_irq)
-{
- struct irq_host *host;
- unsigned int size = sizeof(struct irq_host);
- unsigned int i;
- unsigned int *rmap;
- unsigned long flags;
-
- /* Allocate structure and revmap table if using linear mapping */
- if (revmap_type == IRQ_HOST_MAP_LINEAR)
- size += revmap_arg * sizeof(unsigned int);
- host = kzalloc(size, GFP_KERNEL);
- if (host == NULL)
- return NULL;
-
- /* Fill structure */
- host->revmap_type = revmap_type;
- host->inval_irq = inval_irq;
- host->ops = ops;
- host->of_node = of_node_get(of_node);
-
- if (host->ops->match == NULL)
- host->ops->match = default_irq_host_match;
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
-
- /* Check for the priority controller. */
- if (revmap_type == IRQ_HOST_MAP_PRIORITY) {
- if (irq_map[0].host != NULL) {
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- of_node_put(host->of_node);
- kfree(host);
- return NULL;
- }
- irq_map[0].host = host;
- }
-
- list_add(&host->link, &irq_hosts);
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
-
- /* Additional setups per revmap type */
- switch (revmap_type) {
- case IRQ_HOST_MAP_PRIORITY:
- /* 0 is always the invalid number for priority */
- host->inval_irq = 0;
- /* setup us as the host for all priority interrupts */
- for (i = 1; i < NR_PRIORITY_IRQS; i++) {
- irq_map[i].hwirq = i;
- smp_wmb();
- irq_map[i].host = host;
- smp_wmb();
-
- ops->map(host, i, i);
- }
- break;
- case IRQ_HOST_MAP_LINEAR:
- rmap = (unsigned int *)(host + 1);
- for (i = 0; i < revmap_arg; i++)
- rmap[i] = NO_IRQ;
- host->revmap_data.linear.size = revmap_arg;
- smp_wmb();
- host->revmap_data.linear.revmap = rmap;
- break;
- case IRQ_HOST_MAP_TREE:
- INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
- break;
- default:
- break;
- }
-
- pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
-
- return host;
-}
-
-struct irq_host *irq_find_host(struct device_node *node)
-{
- struct irq_host *h, *found = NULL;
- unsigned long flags;
-
- /* We might want to match the legacy controller last since
- * it might potentially be set to match all interrupts in
- * the absence of a device node. This isn't a problem so far
- * yet though...
- */
- raw_spin_lock_irqsave(&irq_big_lock, flags);
- list_for_each_entry(h, &irq_hosts, link)
- if (h->ops->match(h, node)) {
- found = h;
- break;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return found;
-}
-EXPORT_SYMBOL_GPL(irq_find_host);
-
-void irq_set_default_host(struct irq_host *host)
-{
- pr_debug("irq: Default host set to @0x%p\n", host);
-
- irq_default_host = host;
-}
-
-void irq_set_virq_count(unsigned int count)
-{
- pr_debug("irq: Trying to set virq count to %d\n", count);
-
- BUG_ON(count < NR_PRIORITY_IRQS);
- if (count < NR_IRQS)
- irq_virq_count = count;
-}
-
-static int irq_setup_virq(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- int res;
-
- res = irq_alloc_desc_at(virq, 0);
- if (res != virq) {
- pr_debug("irq: -> allocating desc failed\n");
- goto error;
- }
-
- /* map it */
- smp_wmb();
- irq_map[virq].hwirq = hwirq;
- smp_mb();
-
- if (host->ops->map(host, virq, hwirq)) {
- pr_debug("irq: -> mapping failed, freeing\n");
- goto errdesc;
- }
-
- irq_clear_status_flags(virq, IRQ_NOREQUEST);
-
- return 0;
-
-errdesc:
- irq_free_descs(virq, 1);
-error:
- irq_free_virt(virq, 1);
- return -1;
-}
-
-unsigned int irq_create_direct_mapping(struct irq_host *host)
-{
- unsigned int virq;
-
- if (host == NULL)
- host = irq_default_host;
-
- BUG_ON(host == NULL);
- WARN_ON(host->revmap_type != IRQ_HOST_MAP_NOMAP);
-
- virq = irq_alloc_virt(host, 1, 0);
- if (virq == NO_IRQ) {
- pr_debug("irq: create_direct virq allocation failed\n");
- return NO_IRQ;
- }
-
- pr_debug("irq: create_direct obtained virq %d\n", virq);
-
- if (irq_setup_virq(host, virq, virq))
- return NO_IRQ;
-
- return virq;
-}
-
-unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int virq, hint;
-
- pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
-
- /* Look for default host if nececssary */
- if (host == NULL)
- host = irq_default_host;
- if (host == NULL) {
- printk(KERN_WARNING "irq_create_mapping called for"
- " NULL host, hwirq=%lx\n", hwirq);
- WARN_ON(1);
- return NO_IRQ;
- }
- pr_debug("irq: -> using host @%p\n", host);
-
- /* Check if mapping already exists */
- virq = irq_find_mapping(host, hwirq);
- if (virq != NO_IRQ) {
- pr_debug("irq: -> existing mapping on virq %d\n", virq);
- return virq;
- }
-
- /* Allocate a virtual interrupt number */
- hint = hwirq % irq_virq_count;
- virq = irq_alloc_virt(host, 1, hint);
- if (virq == NO_IRQ) {
- pr_debug("irq: -> virq allocation failed\n");
- return NO_IRQ;
- }
-
- if (irq_setup_virq(host, virq, hwirq))
- return NO_IRQ;
-
- pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n",
- hwirq, host->of_node ? host->of_node->full_name : "null", virq);
-
- return virq;
-}
-EXPORT_SYMBOL_GPL(irq_create_mapping);
-
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- struct irq_host *host;
- irq_hw_number_t hwirq;
- unsigned int type = IRQ_TYPE_NONE;
- unsigned int virq;
-
- if (controller == NULL)
- host = irq_default_host;
- else
- host = irq_find_host(controller);
- if (host == NULL) {
- printk(KERN_WARNING "irq: no irq host found for %s !\n",
- controller->full_name);
- return NO_IRQ;
- }
-
- /* If host has no translation, then we assume interrupt line */
- if (host->ops->xlate == NULL)
- hwirq = intspec[0];
- else {
- if (host->ops->xlate(host, controller, intspec, intsize,
- &hwirq, &type))
- return NO_IRQ;
- }
-
- /* Create mapping */
- virq = irq_create_mapping(host, hwirq);
- if (virq == NO_IRQ)
- return virq;
-
- /* Set type if specified and different than the current one */
- if (type != IRQ_TYPE_NONE &&
- type != (irqd_get_trigger_type(irq_get_irq_data(virq))))
- irq_set_irq_type(virq, type);
- return virq;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-
-void irq_dispose_mapping(unsigned int virq)
-{
- struct irq_host *host;
- irq_hw_number_t hwirq;
-
- if (virq == NO_IRQ)
- return;
-
- /* Never unmap priority interrupts */
- if (virq < NR_PRIORITY_IRQS)
- return;
-
- host = irq_map[virq].host;
- if (WARN_ON(host == NULL))
- return;
-
- irq_set_status_flags(virq, IRQ_NOREQUEST);
-
- /* remove chip and handler */
- irq_set_chip_and_handler(virq, NULL, NULL);
-
- /* Make sure it's completed */
- synchronize_irq(virq);
-
- /* Tell the PIC about it */
- if (host->ops->unmap)
- host->ops->unmap(host, virq);
- smp_mb();
-
- /* Clear reverse map */
- hwirq = irq_map[virq].hwirq;
- switch (host->revmap_type) {
- case IRQ_HOST_MAP_LINEAR:
- if (hwirq < host->revmap_data.linear.size)
- host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
- break;
- case IRQ_HOST_MAP_TREE:
- mutex_lock(&revmap_trees_mutex);
- radix_tree_delete(&host->revmap_data.tree, hwirq);
- mutex_unlock(&revmap_trees_mutex);
- break;
- }
-
- /* Destroy map */
- smp_mb();
- irq_map[virq].hwirq = host->inval_irq;
-
- irq_free_descs(virq, 1);
- /* Free it */
- irq_free_virt(virq, 1);
-}
-EXPORT_SYMBOL_GPL(irq_dispose_mapping);
-
-unsigned int irq_find_mapping(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int i;
- unsigned int hint = hwirq % irq_virq_count;
-
- /* Look for default host if nececssary */
- if (host == NULL)
- host = irq_default_host;
- if (host == NULL)
- return NO_IRQ;
-
- /* Slow path does a linear search of the map */
- i = hint;
- do {
- if (irq_map[i].host == host &&
- irq_map[i].hwirq == hwirq)
- return i;
- i++;
- if (i >= irq_virq_count)
- i = 4;
- } while (i != hint);
- return NO_IRQ;
-}
-EXPORT_SYMBOL_GPL(irq_find_mapping);
-
-unsigned int irq_radix_revmap_lookup(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- struct irq_map_entry *ptr;
- unsigned int virq;
-
- if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE))
- return irq_find_mapping(host, hwirq);
-
- /*
- * The ptr returned references the static global irq_map.
- * but freeing an irq can delete nodes along the path to
- * do the lookup via call_rcu.
- */
- rcu_read_lock();
- ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
- rcu_read_unlock();
-
- /*
- * If found in radix tree, then fine.
- * Else fallback to linear lookup - this should not happen in practice
- * as it means that we failed to insert the node in the radix tree.
- */
- if (ptr)
- virq = ptr - irq_map;
- else
- virq = irq_find_mapping(host, hwirq);
-
- return virq;
-}
-
-void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE))
- return;
-
- if (virq != NO_IRQ) {
- mutex_lock(&revmap_trees_mutex);
- radix_tree_insert(&host->revmap_data.tree, hwirq,
- &irq_map[virq]);
- mutex_unlock(&revmap_trees_mutex);
- }
-}
-
-unsigned int irq_linear_revmap(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int *revmap;
-
- if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR))
- return irq_find_mapping(host, hwirq);
-
- /* Check revmap bounds */
- if (unlikely(hwirq >= host->revmap_data.linear.size))
- return irq_find_mapping(host, hwirq);
-
- /* Check if revmap was allocated */
- revmap = host->revmap_data.linear.revmap;
- if (unlikely(revmap == NULL))
- return irq_find_mapping(host, hwirq);
-
- /* Fill up revmap with slow path if no mapping found */
- if (unlikely(revmap[hwirq] == NO_IRQ))
- revmap[hwirq] = irq_find_mapping(host, hwirq);
-
- return revmap[hwirq];
-}
-
-unsigned int irq_alloc_virt(struct irq_host *host,
- unsigned int count,
- unsigned int hint)
-{
- unsigned long flags;
- unsigned int i, j, found = NO_IRQ;
-
- if (count == 0 || count > (irq_virq_count - NR_PRIORITY_IRQS))
- return NO_IRQ;
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
-
- /* Use hint for 1 interrupt if any */
- if (count == 1 && hint >= NR_PRIORITY_IRQS &&
- hint < irq_virq_count && irq_map[hint].host == NULL) {
- found = hint;
- goto hint_found;
- }
-
- /* Look for count consecutive numbers in the allocatable
- * (non-legacy) space
- */
- for (i = NR_PRIORITY_IRQS, j = 0; i < irq_virq_count; i++) {
- if (irq_map[i].host != NULL)
- j = 0;
- else
- j++;
-
- if (j == count) {
- found = i - count + 1;
- break;
- }
- }
- if (found == NO_IRQ) {
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return NO_IRQ;
- }
- hint_found:
- for (i = found; i < (found + count); i++) {
- irq_map[i].hwirq = host->inval_irq;
- smp_wmb();
- irq_map[i].host = host;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return found;
-}
-
-void irq_free_virt(unsigned int virq, unsigned int count)
-{
- unsigned long flags;
- unsigned int i;
-
- WARN_ON(virq < NR_PRIORITY_IRQS);
- WARN_ON(count == 0 || (virq + count) > irq_virq_count);
-
- if (virq < NR_PRIORITY_IRQS) {
- if (virq + count < NR_PRIORITY_IRQS)
- return;
- count -= NR_PRIORITY_IRQS - virq;
- virq = NR_PRIORITY_IRQS;
- }
-
- if (count > irq_virq_count || virq > irq_virq_count - count) {
- if (virq > irq_virq_count)
- return;
- count = irq_virq_count - virq;
- }
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
- for (i = virq; i < (virq + count); i++) {
- struct irq_host *host;
-
- host = irq_map[i].host;
- irq_map[i].hwirq = host->inval_irq;
- smp_wmb();
- irq_map[i].host = NULL;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
-}
-
-#ifdef CONFIG_VIRQ_DEBUG
-static int virq_debug_show(struct seq_file *m, void *private)
-{
- unsigned long flags;
- struct irq_desc *desc;
- const char *p;
- static const char none[] = "none";
- void *data;
- int i;
-
- seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
- "chip name", "chip data", "host name");
-
- for (i = 1; i < nr_irqs; i++) {
- desc = irq_to_desc(i);
- if (!desc)
- continue;
-
- raw_spin_lock_irqsave(&desc->lock, flags);
-
- if (desc->action && desc->action->handler) {
- struct irq_chip *chip;
-
- seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05lx ", irq_map[i].hwirq);
-
- chip = irq_desc_get_chip(desc);
- if (chip && chip->name)
- p = chip->name;
- else
- p = none;
- seq_printf(m, "%-15s ", p);
-
- data = irq_desc_get_chip_data(desc);
- seq_printf(m, "0x%16p ", data);
-
- if (irq_map[i].host && irq_map[i].host->of_node)
- p = irq_map[i].host->of_node->full_name;
- else
- p = none;
- seq_printf(m, "%s\n", p);
- }
-
- raw_spin_unlock_irqrestore(&desc->lock, flags);
- }
-
- return 0;
-}
-
-static int virq_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, virq_debug_show, inode->i_private);
-}
-
-static const struct file_operations virq_debug_fops = {
- .open = virq_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init irq_debugfs_init(void)
-{
- if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
- NULL, &virq_debug_fops) == NULL)
- return -ENOMEM;
-
- return 0;
-}
-device_initcall(irq_debugfs_init);
-#endif /* CONFIG_VIRQ_DEBUG */
diff --git a/arch/c6x/platforms/megamod-pic.c b/arch/c6x/platforms/megamod-pic.c
index 7c37a94..c1c4e2a 100644
--- a/arch/c6x/platforms/megamod-pic.c
+++ b/arch/c6x/platforms/megamod-pic.c
@@ -48,7 +48,7 @@
};
struct megamod_pic {
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
struct megamod_regs __iomem *regs;
raw_spinlock_t lock;
@@ -116,7 +116,7 @@
}
}
-static int megamod_map(struct irq_host *h, unsigned int virq,
+static int megamod_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct megamod_pic *pic = h->host_data;
@@ -136,21 +136,9 @@
return 0;
}
-static int megamod_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type)
-
-{
- /* megamod intspecs must have 1 cell */
- BUG_ON(intsize != 1);
- *out_hwirq = intspec[0];
- *out_type = IRQ_TYPE_NONE;
- return 0;
-}
-
-static struct irq_host_ops megamod_host_ops = {
+static const struct irq_domain_ops megamod_domain_ops = {
.map = megamod_map,
- .xlate = megamod_xlate,
+ .xlate = irq_domain_xlate_onecell,
};
static void __init set_megamod_mux(struct megamod_pic *pic, int src, int output)
@@ -223,9 +211,8 @@
return NULL;
}
- pic->irqhost = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- NR_COMBINERS * 32, &megamod_host_ops,
- IRQ_UNMAPPED);
+ pic->irqhost = irq_domain_add_linear(np, NR_COMBINERS * 32,
+ &megamod_domain_ops, pic);
if (!pic->irqhost) {
pr_err("%s: Could not alloc host.\n", np->full_name);
goto error_free;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c8d6efb..11060fa 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -14,6 +14,7 @@
select TRACING_SUPPORT
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index cd1ac9a..fb3c05a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_HARDIRQ_H
-#define _ASM_MICROBLAZE_HARDIRQ_H
-
-/* should be defined in each interrupt controller driver */
-extern unsigned int get_irq(struct pt_regs *regs);
-
#include <asm-generic/hardirq.h>
-
-#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index a175132..bab3b13 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -9,49 +9,13 @@
#ifndef _ASM_MICROBLAZE_IRQ_H
#define _ASM_MICROBLAZE_IRQ_H
-
-/*
- * Linux IRQ# is currently offset by one to map to the hardware
- * irq number. So hardware IRQ0 maps to Linux irq 1.
- */
-#define NO_IRQ_OFFSET 1
-#define IRQ_OFFSET NO_IRQ_OFFSET
-#define NR_IRQS (32 + IRQ_OFFSET)
+#define NR_IRQS (32 + 1)
#include <asm-generic/irq.h>
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-extern unsigned int nr_irq;
-
struct pt_regs;
extern void do_IRQ(struct pt_regs *regs);
-/** FIXME - not implement
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-static inline void irq_dispose_mapping(unsigned int virq)
-{
- return;
-}
-
-struct irq_host;
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq);
+/* should be defined in each interrupt controller driver */
+extern unsigned int get_irq(void);
#endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 44b177e..ad12067 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
+#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <asm/page.h>
#include <linux/io.h>
@@ -25,8 +26,6 @@
#define INTC_BASE intc_baseaddr
#endif
-unsigned int nr_irq;
-
/* No one else should require these constants, so define them locally here. */
#define ISR 0x00 /* Interrupt Status Register */
#define IPR 0x04 /* Interrupt Pending Register */
@@ -84,24 +83,45 @@
.irq_mask_ack = intc_mask_ack,
};
-unsigned int get_irq(struct pt_regs *regs)
-{
- int irq;
+static struct irq_domain *root_domain;
- /*
- * NOTE: This function is the one that needs to be improved in
- * order to handle multiple interrupt controllers. It currently
- * is hardcoded to check for interrupts only on the first INTC.
- */
- irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET;
- pr_debug("get_irq: %d\n", irq);
+unsigned int get_irq(void)
+{
+ unsigned int hwirq, irq = -1;
+
+ hwirq = in_be32(INTC_BASE + IVR);
+ if (hwirq != -1U)
+ irq = irq_find_mapping(root_domain, hwirq);
+
+ pr_debug("get_irq: hwirq=%d, irq=%d\n", hwirq, irq);
return irq;
}
+int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ u32 intr_mask = (u32)d->host_data;
+
+ if (intr_mask & (1 << hw)) {
+ irq_set_chip_and_handler_name(irq, &intc_dev,
+ handle_edge_irq, "edge");
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ } else {
+ irq_set_chip_and_handler_name(irq, &intc_dev,
+ handle_level_irq, "level");
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ }
+ return 0;
+}
+
+static const struct irq_domain_ops xintc_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+ .map = xintc_map,
+};
+
void __init init_IRQ(void)
{
- u32 i, intr_mask;
+ u32 nr_irq, intr_mask;
struct device_node *intc = NULL;
#ifdef CONFIG_SELFMOD_INTC
unsigned int intc_baseaddr = 0;
@@ -146,16 +166,9 @@
/* Turn on the Master Enable. */
out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
- for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) {
- if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) {
- irq_set_chip_and_handler_name(i, &intc_dev,
- handle_edge_irq, "edge");
- irq_clear_status_flags(i, IRQ_LEVEL);
- } else {
- irq_set_chip_and_handler_name(i, &intc_dev,
- handle_level_irq, "level");
- irq_set_status_flags(i, IRQ_LEVEL);
- }
- irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET;
- }
+ /* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
+ * lazy and Michal can clean it up to something nicer when he tests
+ * and commits this patch. ~~gcl */
+ root_domain = irq_domain_add_linear(intc, nr_irq, &xintc_irq_domain_ops,
+ (void *)intr_mask);
}
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index bbebcae..ace700a 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -31,14 +31,13 @@
trace_hardirqs_off();
irq_enter();
- irq = get_irq(regs);
+ irq = get_irq();
next_irq:
BUG_ON(!irq);
- /* Substract 1 because of get_irq */
- generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET);
+ generic_handle_irq(irq);
- irq = get_irq(regs);
- if (irq) {
+ irq = get_irq();
+ if (irq != -1U) {
pr_debug("next irq: %d\n", irq);
++concurrent_irq;
goto next_irq;
@@ -48,18 +47,3 @@
set_irq_regs(old_regs);
trace_hardirqs_on();
}
-
-/* MS: There is no any advance mapping mechanism. We are using simple 32bit
- intc without any cascades or any connection that's why mapping is 1:1 */
-unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
-{
- return hwirq + IRQ_OFFSET;
-}
-EXPORT_SYMBOL_GPL(irq_create_mapping);
-
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- return intspec[0] + IRQ_OFFSET;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 604cd9d..70e6d0b 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -51,8 +51,6 @@
unflatten_device_tree();
- /* NOTE I think that this function is not necessary to call */
- /* irq_early_init(); */
setup_cpuinfo();
microblaze_cache_init();
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 5ab6e89..edbbae1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2327,6 +2327,7 @@
bool "Flattened Device Tree support"
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
help
Include support for flattened device tree machine descriptions.
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 2354c87..fb698dc 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -11,15 +11,12 @@
#include <linux/linkage.h>
#include <linux/smp.h>
+#include <linux/irqdomain.h>
#include <asm/mipsmtregs.h>
#include <irq.h>
-static inline void irq_dispose_mapping(unsigned int virq)
-{
-}
-
#ifdef CONFIG_I8259
static inline int irq_canonicalize(int irq)
{
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 6b8b420..558b539 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -60,20 +60,6 @@
}
#endif
-/*
- * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
- *
- * Currently the mapping mechanism is trivial; simple flat hwirq numbers are
- * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not
- * supported.
- */
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- return intspec[0];
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-
void __init early_init_devtree(void *params)
{
/* Setup flat device-tree pointer */
diff --git a/arch/openrisc/include/asm/prom.h b/arch/openrisc/include/asm/prom.h
index e1f3fe2..bbb34e5 100644
--- a/arch/openrisc/include/asm/prom.h
+++ b/arch/openrisc/include/asm/prom.h
@@ -24,6 +24,7 @@
#include <linux/types.h>
#include <asm/irq.h>
+#include <linux/irqdomain.h>
#include <linux/atomic.h>
#include <linux/of_irq.h>
#include <linux/of_fdt.h>
@@ -63,15 +64,6 @@
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-/* This routine is here to provide compatibility with how powerpc
- * handles IRQ mapping for OF device nodes. We precompute and permanently
- * register them in the platform_device objects, whereas powerpc computes them
- * on request.
- */
-static inline void irq_dispose_mapping(unsigned int virq)
-{
-}
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_OPENRISC_PROM_H */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1919634..303703d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -135,6 +135,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select IRQ_PER_CPU
+ select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select IRQ_FORCED_THREADING
diff --git a/arch/powerpc/include/asm/ehv_pic.h b/arch/powerpc/include/asm/ehv_pic.h
index a9e1f4f..dc7d48e 100644
--- a/arch/powerpc/include/asm/ehv_pic.h
+++ b/arch/powerpc/include/asm/ehv_pic.h
@@ -25,7 +25,7 @@
struct ehv_pic {
/* The remapper for this EHV_PIC */
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
index 105ade2..c3fdfbd 100644
--- a/arch/powerpc/include/asm/i8259.h
+++ b/arch/powerpc/include/asm/i8259.h
@@ -6,7 +6,7 @@
extern void i8259_init(struct device_node *node, unsigned long intack_addr);
extern unsigned int i8259_irq(void);
-extern struct irq_host *i8259_get_host(void);
+extern struct irq_domain *i8259_get_host(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_I8259_H */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index c0e1bc3..fe0b09d 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -9,6 +9,7 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/irqdomain.h>
#include <linux/threads.h>
#include <linux/list.h>
#include <linux/radix-tree.h>
@@ -35,258 +36,12 @@
/* Total number of virq in the platform */
#define NR_IRQS CONFIG_NR_IRQS
-/* Number of irqs reserved for the legacy controller */
-#define NUM_ISA_INTERRUPTS 16
-
/* Same thing, used by the generic IRQ code */
#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are fairly agnostic to the fact that
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart host->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-struct irq_host;
-struct radix_tree_root;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
- /* Match an interrupt controller device node to a host, returns
- * 1 on a match
- */
- int (*match)(struct irq_host *h, struct device_node *node);
-
- /* Create or update a mapping between a virtual irq number and a hw
- * irq number. This is called only once for a given mapping.
- */
- int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
- /* Dispose of such a mapping */
- void (*unmap)(struct irq_host *h, unsigned int virq);
-
- /* Translate device-tree interrupt specifier from raw format coming
- * from the firmware to a irq_hw_number_t (interrupt line number) and
- * type (sense) that can be passed to set_irq_type(). In the absence
- * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
- * will return the hw number in the first cell and IRQ_TYPE_NONE for
- * the type (which amount to keeping whatever default value the
- * interrupt controller has for that line)
- */
- int (*xlate)(struct irq_host *h, struct device_node *ctrler,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
- struct list_head link;
-
- /* type of reverse mapping technique */
- unsigned int revmap_type;
-#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE 3 /* radix tree */
- union {
- struct {
- unsigned int size;
- unsigned int *revmap;
- } linear;
- struct radix_tree_root tree;
- } revmap_data;
- struct irq_host_ops *ops;
- void *host_data;
- irq_hw_number_t inval_irq;
-
- /* Optional device node pointer */
- struct device_node *of_node;
-};
-
struct irq_data;
extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
-extern bool virq_is_host(unsigned int virq, struct irq_host *host);
-
-/**
- * irq_alloc_host - Allocate a new irq_host data structure
- * @of_node: optional device-tree node of the interrupt controller
- * @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
- * @ops: map/unmap host callbacks
- * @inval_irq: provide a hw number in that host space that is always invalid
- *
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
- * for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
- * later during boot automatically (the reverse mapping will use the slow path
- * until that happens).
- */
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
- unsigned int revmap_type,
- unsigned int revmap_arg,
- struct irq_host_ops *ops,
- irq_hw_number_t inval_irq);
-
-
-/**
- * irq_find_host - Locates a host for a given device node
- * @node: device-tree node of the interrupt controller
- */
-extern struct irq_host *irq_find_host(struct device_node *node);
-
-
-/**
- * irq_set_default_host - Set a "default" host
- * @host: default host pointer
- *
- * For convenience, it's possible to set a "default" host that will be used
- * whenever NULL is passed to irq_create_mapping(). It makes life easier for
- * platforms that want to manipulate a few hard coded interrupt numbers that
- * aren't properly represented in the device-tree.
- */
-extern void irq_set_default_host(struct irq_host *host);
-
-
-/**
- * irq_set_virq_count - Set the maximum number of virt irqs
- * @count: number of linux virtual irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-extern void irq_set_virq_count(unsigned int count);
-
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-extern void irq_dispose_mapping(unsigned int virq);
-
-/**
- * irq_find_mapping - Find a linux virq from an hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a slow path, for use by generic code. It's expected that an
- * irq controller implementation directly calls the appropriate low level
- * mapping function.
- */
-extern unsigned int irq_find_mapping(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-/**
- * irq_create_direct_mapping - Allocate a virq for direct mapping
- * @host: host to allocate the virq for or NULL for default host
- *
- * This routine is used for irq controllers which can choose the hardware
- * interrupt numbers they generate. In such a case it's simplest to use
- * the linux virq as the hardware interrupt number.
- */
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
-
-/**
- * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
- * @host: host owning this hardware interrupt
- * @virq: linux irq number
- * @hwirq: hardware irq number in that host space
- *
- * This is for use by irq controllers that use a radix tree reverse
- * mapping for fast lookup.
- */
-extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq);
-
-/**
- * irq_radix_revmap_lookup - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses radix tree
- * revmaps
- */
-extern unsigned int irq_radix_revmap_lookup(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-/**
- * irq_linear_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses linear
- * revmaps. It does fallback to the slow path if the revmap doesn't exist
- * yet and will create the revmap entry with appropriate locking
- */
-
-extern unsigned int irq_linear_revmap(struct irq_host *host,
- irq_hw_number_t hwirq);
-
-
-
-/**
- * irq_alloc_virt - Allocate virtual irq numbers
- * @host: host owning these new virtual irqs
- * @count: number of consecutive numbers to allocate
- * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
- *
- * This is a low level function that is used internally by irq_create_mapping()
- * and that can be used by some irq controllers implementations for things
- * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
- */
-extern unsigned int irq_alloc_virt(struct irq_host *host,
- unsigned int count,
- unsigned int hint);
-
-/**
- * irq_free_virt - Free virtual irq numbers
- * @virq: virtual irq number of the first interrupt to free
- * @count: number of interrupts to free
- *
- * This function is the opposite of irq_alloc_virt. It will not clear reverse
- * maps, this should be done previously by unmap'ing the interrupt. In fact,
- * all interrupts covered by the range being freed should have been unmapped
- * prior to calling this.
- */
-extern void irq_free_virt(unsigned int virq, unsigned int count);
/**
* irq_early_init - Init irq remapping subsystem
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index 67b4d98..a5b7c56 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -255,7 +255,7 @@
struct device_node *node;
/* The remapper for this MPIC */
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index c48de98..4ae9a09 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -86,7 +86,7 @@
extern unsigned int xics_default_server;
extern unsigned int xics_default_distrib_server;
extern unsigned int xics_interrupt_server_size;
-extern struct irq_host *xics_host;
+extern struct irq_domain *xics_host;
struct xics_cppr {
unsigned char stack[MAX_NUM_PRIORITIES];
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 01e2877..bdfb3eee 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -490,409 +490,19 @@
local_irq_restore(flags);
}
-
-/*
- * IRQ controller and virtual interrupts
- */
-
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
- irq_hw_number_t hwirq;
- struct irq_host *host;
-};
-
-static LIST_HEAD(irq_hosts);
-static DEFINE_RAW_SPINLOCK(irq_big_lock);
-static DEFINE_MUTEX(revmap_trees_mutex);
-static struct irq_map_entry irq_map[NR_IRQS];
-static unsigned int irq_virq_count = NR_IRQS;
-static struct irq_host *irq_default_host;
-
irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
{
- return irq_map[d->irq].hwirq;
+ return d->hwirq;
}
EXPORT_SYMBOL_GPL(irqd_to_hwirq);
irq_hw_number_t virq_to_hw(unsigned int virq)
{
- return irq_map[virq].hwirq;
+ struct irq_data *irq_data = irq_get_irq_data(virq);
+ return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
}
EXPORT_SYMBOL_GPL(virq_to_hw);
-bool virq_is_host(unsigned int virq, struct irq_host *host)
-{
- return irq_map[virq].host == host;
-}
-EXPORT_SYMBOL_GPL(virq_is_host);
-
-static int default_irq_host_match(struct irq_host *h, struct device_node *np)
-{
- return h->of_node != NULL && h->of_node == np;
-}
-
-struct irq_host *irq_alloc_host(struct device_node *of_node,
- unsigned int revmap_type,
- unsigned int revmap_arg,
- struct irq_host_ops *ops,
- irq_hw_number_t inval_irq)
-{
- struct irq_host *host;
- unsigned int size = sizeof(struct irq_host);
- unsigned int i;
- unsigned int *rmap;
- unsigned long flags;
-
- /* Allocate structure and revmap table if using linear mapping */
- if (revmap_type == IRQ_HOST_MAP_LINEAR)
- size += revmap_arg * sizeof(unsigned int);
- host = kzalloc(size, GFP_KERNEL);
- if (host == NULL)
- return NULL;
-
- /* Fill structure */
- host->revmap_type = revmap_type;
- host->inval_irq = inval_irq;
- host->ops = ops;
- host->of_node = of_node_get(of_node);
-
- if (host->ops->match == NULL)
- host->ops->match = default_irq_host_match;
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
-
- /* If it's a legacy controller, check for duplicates and
- * mark it as allocated (we use irq 0 host pointer for that
- */
- if (revmap_type == IRQ_HOST_MAP_LEGACY) {
- if (irq_map[0].host != NULL) {
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- of_node_put(host->of_node);
- kfree(host);
- return NULL;
- }
- irq_map[0].host = host;
- }
-
- list_add(&host->link, &irq_hosts);
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
-
- /* Additional setups per revmap type */
- switch(revmap_type) {
- case IRQ_HOST_MAP_LEGACY:
- /* 0 is always the invalid number for legacy */
- host->inval_irq = 0;
- /* setup us as the host for all legacy interrupts */
- for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
- irq_map[i].hwirq = i;
- smp_wmb();
- irq_map[i].host = host;
- smp_wmb();
-
- /* Legacy flags are left to default at this point,
- * one can then use irq_create_mapping() to
- * explicitly change them
- */
- ops->map(host, i, i);
-
- /* Clear norequest flags */
- irq_clear_status_flags(i, IRQ_NOREQUEST);
- }
- break;
- case IRQ_HOST_MAP_LINEAR:
- rmap = (unsigned int *)(host + 1);
- for (i = 0; i < revmap_arg; i++)
- rmap[i] = NO_IRQ;
- host->revmap_data.linear.size = revmap_arg;
- smp_wmb();
- host->revmap_data.linear.revmap = rmap;
- break;
- case IRQ_HOST_MAP_TREE:
- INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
- break;
- default:
- break;
- }
-
- pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
-
- return host;
-}
-
-struct irq_host *irq_find_host(struct device_node *node)
-{
- struct irq_host *h, *found = NULL;
- unsigned long flags;
-
- /* We might want to match the legacy controller last since
- * it might potentially be set to match all interrupts in
- * the absence of a device node. This isn't a problem so far
- * yet though...
- */
- raw_spin_lock_irqsave(&irq_big_lock, flags);
- list_for_each_entry(h, &irq_hosts, link)
- if (h->ops->match(h, node)) {
- found = h;
- break;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return found;
-}
-EXPORT_SYMBOL_GPL(irq_find_host);
-
-void irq_set_default_host(struct irq_host *host)
-{
- pr_debug("irq: Default host set to @0x%p\n", host);
-
- irq_default_host = host;
-}
-
-void irq_set_virq_count(unsigned int count)
-{
- pr_debug("irq: Trying to set virq count to %d\n", count);
-
- BUG_ON(count < NUM_ISA_INTERRUPTS);
- if (count < NR_IRQS)
- irq_virq_count = count;
-}
-
-static int irq_setup_virq(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- int res;
-
- res = irq_alloc_desc_at(virq, 0);
- if (res != virq) {
- pr_debug("irq: -> allocating desc failed\n");
- goto error;
- }
-
- /* map it */
- smp_wmb();
- irq_map[virq].hwirq = hwirq;
- smp_mb();
-
- if (host->ops->map(host, virq, hwirq)) {
- pr_debug("irq: -> mapping failed, freeing\n");
- goto errdesc;
- }
-
- irq_clear_status_flags(virq, IRQ_NOREQUEST);
-
- return 0;
-
-errdesc:
- irq_free_descs(virq, 1);
-error:
- irq_free_virt(virq, 1);
- return -1;
-}
-
-unsigned int irq_create_direct_mapping(struct irq_host *host)
-{
- unsigned int virq;
-
- if (host == NULL)
- host = irq_default_host;
-
- BUG_ON(host == NULL);
- WARN_ON(host->revmap_type != IRQ_HOST_MAP_NOMAP);
-
- virq = irq_alloc_virt(host, 1, 0);
- if (virq == NO_IRQ) {
- pr_debug("irq: create_direct virq allocation failed\n");
- return NO_IRQ;
- }
-
- pr_debug("irq: create_direct obtained virq %d\n", virq);
-
- if (irq_setup_virq(host, virq, virq))
- return NO_IRQ;
-
- return virq;
-}
-
-unsigned int irq_create_mapping(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int virq, hint;
-
- pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
-
- /* Look for default host if nececssary */
- if (host == NULL)
- host = irq_default_host;
- if (host == NULL) {
- printk(KERN_WARNING "irq_create_mapping called for"
- " NULL host, hwirq=%lx\n", hwirq);
- WARN_ON(1);
- return NO_IRQ;
- }
- pr_debug("irq: -> using host @%p\n", host);
-
- /* Check if mapping already exists */
- virq = irq_find_mapping(host, hwirq);
- if (virq != NO_IRQ) {
- pr_debug("irq: -> existing mapping on virq %d\n", virq);
- return virq;
- }
-
- /* Get a virtual interrupt number */
- if (host->revmap_type == IRQ_HOST_MAP_LEGACY) {
- /* Handle legacy */
- virq = (unsigned int)hwirq;
- if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
- return NO_IRQ;
- return virq;
- } else {
- /* Allocate a virtual interrupt number */
- hint = hwirq % irq_virq_count;
- virq = irq_alloc_virt(host, 1, hint);
- if (virq == NO_IRQ) {
- pr_debug("irq: -> virq allocation failed\n");
- return NO_IRQ;
- }
- }
-
- if (irq_setup_virq(host, virq, hwirq))
- return NO_IRQ;
-
- pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n",
- hwirq, host->of_node ? host->of_node->full_name : "null", virq);
-
- return virq;
-}
-EXPORT_SYMBOL_GPL(irq_create_mapping);
-
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- struct irq_host *host;
- irq_hw_number_t hwirq;
- unsigned int type = IRQ_TYPE_NONE;
- unsigned int virq;
-
- if (controller == NULL)
- host = irq_default_host;
- else
- host = irq_find_host(controller);
- if (host == NULL) {
- printk(KERN_WARNING "irq: no irq host found for %s !\n",
- controller->full_name);
- return NO_IRQ;
- }
-
- /* If host has no translation, then we assume interrupt line */
- if (host->ops->xlate == NULL)
- hwirq = intspec[0];
- else {
- if (host->ops->xlate(host, controller, intspec, intsize,
- &hwirq, &type))
- return NO_IRQ;
- }
-
- /* Create mapping */
- virq = irq_create_mapping(host, hwirq);
- if (virq == NO_IRQ)
- return virq;
-
- /* Set type if specified and different than the current one */
- if (type != IRQ_TYPE_NONE &&
- type != (irqd_get_trigger_type(irq_get_irq_data(virq))))
- irq_set_irq_type(virq, type);
- return virq;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-
-void irq_dispose_mapping(unsigned int virq)
-{
- struct irq_host *host;
- irq_hw_number_t hwirq;
-
- if (virq == NO_IRQ)
- return;
-
- host = irq_map[virq].host;
- if (WARN_ON(host == NULL))
- return;
-
- /* Never unmap legacy interrupts */
- if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
- return;
-
- irq_set_status_flags(virq, IRQ_NOREQUEST);
-
- /* remove chip and handler */
- irq_set_chip_and_handler(virq, NULL, NULL);
-
- /* Make sure it's completed */
- synchronize_irq(virq);
-
- /* Tell the PIC about it */
- if (host->ops->unmap)
- host->ops->unmap(host, virq);
- smp_mb();
-
- /* Clear reverse map */
- hwirq = irq_map[virq].hwirq;
- switch(host->revmap_type) {
- case IRQ_HOST_MAP_LINEAR:
- if (hwirq < host->revmap_data.linear.size)
- host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
- break;
- case IRQ_HOST_MAP_TREE:
- mutex_lock(&revmap_trees_mutex);
- radix_tree_delete(&host->revmap_data.tree, hwirq);
- mutex_unlock(&revmap_trees_mutex);
- break;
- }
-
- /* Destroy map */
- smp_mb();
- irq_map[virq].hwirq = host->inval_irq;
-
- irq_free_descs(virq, 1);
- /* Free it */
- irq_free_virt(virq, 1);
-}
-EXPORT_SYMBOL_GPL(irq_dispose_mapping);
-
-unsigned int irq_find_mapping(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int i;
- unsigned int hint = hwirq % irq_virq_count;
-
- /* Look for default host if nececssary */
- if (host == NULL)
- host = irq_default_host;
- if (host == NULL)
- return NO_IRQ;
-
- /* legacy -> bail early */
- if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
- return hwirq;
-
- /* Slow path does a linear search of the map */
- if (hint < NUM_ISA_INTERRUPTS)
- hint = NUM_ISA_INTERRUPTS;
- i = hint;
- do {
- if (irq_map[i].host == host &&
- irq_map[i].hwirq == hwirq)
- return i;
- i++;
- if (i >= irq_virq_count)
- i = NUM_ISA_INTERRUPTS;
- } while(i != hint);
- return NO_IRQ;
-}
-EXPORT_SYMBOL_GPL(irq_find_mapping);
-
#ifdef CONFIG_SMP
int irq_choose_cpu(const struct cpumask *mask)
{
@@ -929,232 +539,11 @@
}
#endif
-unsigned int irq_radix_revmap_lookup(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- struct irq_map_entry *ptr;
- unsigned int virq;
-
- if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE))
- return irq_find_mapping(host, hwirq);
-
- /*
- * The ptr returned references the static global irq_map.
- * but freeing an irq can delete nodes along the path to
- * do the lookup via call_rcu.
- */
- rcu_read_lock();
- ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
- rcu_read_unlock();
-
- /*
- * If found in radix tree, then fine.
- * Else fallback to linear lookup - this should not happen in practice
- * as it means that we failed to insert the node in the radix tree.
- */
- if (ptr)
- virq = ptr - irq_map;
- else
- virq = irq_find_mapping(host, hwirq);
-
- return virq;
-}
-
-void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE))
- return;
-
- if (virq != NO_IRQ) {
- mutex_lock(&revmap_trees_mutex);
- radix_tree_insert(&host->revmap_data.tree, hwirq,
- &irq_map[virq]);
- mutex_unlock(&revmap_trees_mutex);
- }
-}
-
-unsigned int irq_linear_revmap(struct irq_host *host,
- irq_hw_number_t hwirq)
-{
- unsigned int *revmap;
-
- if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR))
- return irq_find_mapping(host, hwirq);
-
- /* Check revmap bounds */
- if (unlikely(hwirq >= host->revmap_data.linear.size))
- return irq_find_mapping(host, hwirq);
-
- /* Check if revmap was allocated */
- revmap = host->revmap_data.linear.revmap;
- if (unlikely(revmap == NULL))
- return irq_find_mapping(host, hwirq);
-
- /* Fill up revmap with slow path if no mapping found */
- if (unlikely(revmap[hwirq] == NO_IRQ))
- revmap[hwirq] = irq_find_mapping(host, hwirq);
-
- return revmap[hwirq];
-}
-
-unsigned int irq_alloc_virt(struct irq_host *host,
- unsigned int count,
- unsigned int hint)
-{
- unsigned long flags;
- unsigned int i, j, found = NO_IRQ;
-
- if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
- return NO_IRQ;
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
-
- /* Use hint for 1 interrupt if any */
- if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
- hint < irq_virq_count && irq_map[hint].host == NULL) {
- found = hint;
- goto hint_found;
- }
-
- /* Look for count consecutive numbers in the allocatable
- * (non-legacy) space
- */
- for (i = NUM_ISA_INTERRUPTS, j = 0; i < irq_virq_count; i++) {
- if (irq_map[i].host != NULL)
- j = 0;
- else
- j++;
-
- if (j == count) {
- found = i - count + 1;
- break;
- }
- }
- if (found == NO_IRQ) {
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return NO_IRQ;
- }
- hint_found:
- for (i = found; i < (found + count); i++) {
- irq_map[i].hwirq = host->inval_irq;
- smp_wmb();
- irq_map[i].host = host;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
- return found;
-}
-
-void irq_free_virt(unsigned int virq, unsigned int count)
-{
- unsigned long flags;
- unsigned int i;
-
- WARN_ON (virq < NUM_ISA_INTERRUPTS);
- WARN_ON (count == 0 || (virq + count) > irq_virq_count);
-
- if (virq < NUM_ISA_INTERRUPTS) {
- if (virq + count < NUM_ISA_INTERRUPTS)
- return;
- count =- NUM_ISA_INTERRUPTS - virq;
- virq = NUM_ISA_INTERRUPTS;
- }
-
- if (count > irq_virq_count || virq > irq_virq_count - count) {
- if (virq > irq_virq_count)
- return;
- count = irq_virq_count - virq;
- }
-
- raw_spin_lock_irqsave(&irq_big_lock, flags);
- for (i = virq; i < (virq + count); i++) {
- struct irq_host *host;
-
- host = irq_map[i].host;
- irq_map[i].hwirq = host->inval_irq;
- smp_wmb();
- irq_map[i].host = NULL;
- }
- raw_spin_unlock_irqrestore(&irq_big_lock, flags);
-}
-
int arch_early_irq_init(void)
{
return 0;
}
-#ifdef CONFIG_VIRQ_DEBUG
-static int virq_debug_show(struct seq_file *m, void *private)
-{
- unsigned long flags;
- struct irq_desc *desc;
- const char *p;
- static const char none[] = "none";
- void *data;
- int i;
-
- seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
- "chip name", "chip data", "host name");
-
- for (i = 1; i < nr_irqs; i++) {
- desc = irq_to_desc(i);
- if (!desc)
- continue;
-
- raw_spin_lock_irqsave(&desc->lock, flags);
-
- if (desc->action && desc->action->handler) {
- struct irq_chip *chip;
-
- seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05lx ", irq_map[i].hwirq);
-
- chip = irq_desc_get_chip(desc);
- if (chip && chip->name)
- p = chip->name;
- else
- p = none;
- seq_printf(m, "%-15s ", p);
-
- data = irq_desc_get_chip_data(desc);
- seq_printf(m, "0x%16p ", data);
-
- if (irq_map[i].host && irq_map[i].host->of_node)
- p = irq_map[i].host->of_node->full_name;
- else
- p = none;
- seq_printf(m, "%s\n", p);
- }
-
- raw_spin_unlock_irqrestore(&desc->lock, flags);
- }
-
- return 0;
-}
-
-static int virq_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, virq_debug_show, inode->i_private);
-}
-
-static const struct file_operations virq_debug_fops = {
- .open = virq_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init irq_debugfs_init(void)
-{
- if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
- NULL, &virq_debug_fops) == NULL)
- return -ENOMEM;
-
- return 0;
-}
-__initcall(irq_debugfs_init);
-#endif /* CONFIG_VIRQ_DEBUG */
-
#ifdef CONFIG_PPC64
static int __init setup_noirqdistrib(char *str)
{
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index 9f09319..ca3a062 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -21,7 +21,7 @@
#include <asm/prom.h>
static struct device_node *cpld_pic_node;
-static struct irq_host *cpld_pic_host;
+static struct irq_domain *cpld_pic_host;
/*
* Bits to ignore in the misc_status register
@@ -123,13 +123,13 @@
}
static int
-cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+cpld_pic_host_match(struct irq_domain *h, struct device_node *node)
{
return cpld_pic_node == node;
}
static int
-cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+cpld_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_status_flags(virq, IRQ_LEVEL);
@@ -137,8 +137,7 @@
return 0;
}
-static struct
-irq_host_ops cpld_pic_host_ops = {
+static const struct irq_domain_ops cpld_pic_host_ops = {
.match = cpld_pic_host_match,
.map = cpld_pic_host_map,
};
@@ -191,8 +190,7 @@
cpld_pic_node = of_node_get(np);
- cpld_pic_host =
- irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+ cpld_pic_host = irq_domain_add_linear(np, 16, &cpld_pic_host_ops, NULL);
if (!cpld_pic_host) {
printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
goto end;
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
index 96f85e5..17d91b7 100644
--- a/arch/powerpc/platforms/52xx/media5200.c
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -45,7 +45,7 @@
struct media5200_irq {
void __iomem *regs;
spinlock_t lock;
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
};
struct media5200_irq media5200_irq;
@@ -112,7 +112,7 @@
raw_spin_unlock(&desc->lock);
}
-static int media5200_irq_map(struct irq_host *h, unsigned int virq,
+static int media5200_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
@@ -122,7 +122,7 @@
return 0;
}
-static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct,
+static int media5200_irq_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
@@ -136,7 +136,7 @@
return 0;
}
-static struct irq_host_ops media5200_irq_ops = {
+static const struct irq_domain_ops media5200_irq_ops = {
.map = media5200_irq_map,
.xlate = media5200_irq_xlate,
};
@@ -173,15 +173,12 @@
spin_lock_init(&media5200_irq.lock);
- media5200_irq.irqhost = irq_alloc_host(fpga_np, IRQ_HOST_MAP_LINEAR,
- MEDIA5200_NUM_IRQS,
- &media5200_irq_ops, -1);
+ media5200_irq.irqhost = irq_domain_add_linear(fpga_np,
+ MEDIA5200_NUM_IRQS, &media5200_irq_ops, &media5200_irq);
if (!media5200_irq.irqhost)
goto out;
pr_debug("%s: allocated irqhost\n", __func__);
- media5200_irq.irqhost->host_data = &media5200_irq;
-
irq_set_handler_data(cascade_virq, &media5200_irq);
irq_set_chained_handler(cascade_virq, media5200_irq_cascade);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index f94f06e..028470b 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -81,7 +81,7 @@
* @regs: virtual address of GPT registers
* @lock: spinlock to coordinate between different functions.
* @gc: gpio_chip instance structure; used when GPIO is enabled
- * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
+ * @irqhost: Pointer to irq_domain instance; used when IRQ mode is supported
* @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates
* if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates
* if the timer is actively used as wdt which blocks gpt functions
@@ -91,7 +91,7 @@
struct device *dev;
struct mpc52xx_gpt __iomem *regs;
spinlock_t lock;
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
u32 ipb_freq;
u8 wdt_mode;
@@ -204,7 +204,7 @@
}
}
-static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq,
+static int mpc52xx_gpt_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct mpc52xx_gpt_priv *gpt = h->host_data;
@@ -216,7 +216,7 @@
return 0;
}
-static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
+static int mpc52xx_gpt_irq_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
@@ -236,7 +236,7 @@
return 0;
}
-static struct irq_host_ops mpc52xx_gpt_irq_ops = {
+static const struct irq_domain_ops mpc52xx_gpt_irq_ops = {
.map = mpc52xx_gpt_irq_map,
.xlate = mpc52xx_gpt_irq_xlate,
};
@@ -252,14 +252,12 @@
if (!cascade_virq)
return;
- gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
- &mpc52xx_gpt_irq_ops, -1);
+ gpt->irqhost = irq_domain_add_linear(node, 1, &mpc52xx_gpt_irq_ops, gpt);
if (!gpt->irqhost) {
- dev_err(gpt->dev, "irq_alloc_host() failed\n");
+ dev_err(gpt->dev, "irq_domain_add_linear() failed\n");
return;
}
- gpt->irqhost->host_data = gpt;
irq_set_handler_data(cascade_virq, gpt);
irq_set_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 1a9a495..8520b58 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -132,7 +132,7 @@
static struct mpc52xx_intr __iomem *intr;
static struct mpc52xx_sdma __iomem *sdma;
-static struct irq_host *mpc52xx_irqhost = NULL;
+static struct irq_domain *mpc52xx_irqhost = NULL;
static unsigned char mpc52xx_map_senses[4] = {
IRQ_TYPE_LEVEL_HIGH,
@@ -301,7 +301,7 @@
/**
* mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
*/
-static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
+static int mpc52xx_irqhost_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
@@ -335,7 +335,7 @@
/**
* mpc52xx_irqhost_map - Hook to map from virq to an irq_chip structure
*/
-static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
+static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t irq)
{
int l1irq;
@@ -384,7 +384,7 @@
return 0;
}
-static struct irq_host_ops mpc52xx_irqhost_ops = {
+static const struct irq_domain_ops mpc52xx_irqhost_ops = {
.xlate = mpc52xx_irqhost_xlate,
.map = mpc52xx_irqhost_map,
};
@@ -444,9 +444,9 @@
* As last step, add an irq host to translate the real
* hw irq information provided by the ofw to linux virq
*/
- mpc52xx_irqhost = irq_alloc_host(picnode, IRQ_HOST_MAP_LINEAR,
+ mpc52xx_irqhost = irq_domain_add_linear(picnode,
MPC52xx_IRQ_HIGHTESTHWIRQ,
- &mpc52xx_irqhost_ops, -1);
+ &mpc52xx_irqhost_ops, NULL);
if (!mpc52xx_irqhost)
panic(__FILE__ ": Cannot allocate the IRQ host\n");
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 8ccf9ed..328d221 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -29,7 +29,7 @@
struct pq2ads_pci_pic {
struct device_node *node;
- struct irq_host *host;
+ struct irq_domain *host;
struct {
u32 stat;
@@ -103,7 +103,7 @@
}
}
-static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
+static int pci_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_status_flags(virq, IRQ_LEVEL);
@@ -112,14 +112,14 @@
return 0;
}
-static struct irq_host_ops pci_pic_host_ops = {
+static const struct irq_domain_ops pci_pic_host_ops = {
.map = pci_pic_host_map,
};
int __init pq2ads_pci_init_irq(void)
{
struct pq2ads_pci_pic *priv;
- struct irq_host *host;
+ struct irq_domain *host;
struct device_node *np;
int ret = -ENODEV;
int irq;
@@ -156,17 +156,13 @@
out_be32(&priv->regs->mask, ~0);
mb();
- host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, NUM_IRQS,
- &pci_pic_host_ops, NUM_IRQS);
+ host = irq_domain_add_linear(np, NUM_IRQS, &pci_pic_host_ops, priv);
if (!host) {
ret = -ENOMEM;
goto out_unmap_regs;
}
- host->host_data = priv;
-
priv->host = host;
- host->host_data = priv;
irq_set_handler_data(irq, priv);
irq_set_chained_handler(irq, pq2ads_pci_irq_demux);
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 12cb9bb..3bbbf74 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -51,7 +51,7 @@
static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
static void __iomem *socrates_fpga_pic_iobase;
-static struct irq_host *socrates_fpga_pic_irq_host;
+static struct irq_domain *socrates_fpga_pic_irq_host;
static unsigned int socrates_fpga_irqs[3];
static inline uint32_t socrates_fpga_pic_read(int reg)
@@ -227,7 +227,7 @@
.irq_set_type = socrates_fpga_pic_set_type,
};
-static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
+static int socrates_fpga_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
@@ -238,7 +238,7 @@
return 0;
}
-static int socrates_fpga_pic_host_xlate(struct irq_host *h,
+static int socrates_fpga_pic_host_xlate(struct irq_domain *h,
struct device_node *ct, const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
@@ -269,7 +269,7 @@
return 0;
}
-static struct irq_host_ops socrates_fpga_pic_host_ops = {
+static const struct irq_domain_ops socrates_fpga_pic_host_ops = {
.map = socrates_fpga_pic_host_map,
.xlate = socrates_fpga_pic_host_xlate,
};
@@ -279,10 +279,9 @@
unsigned long flags;
int i;
- /* Setup an irq_host structure */
- socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR,
- SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops,
- SOCRATES_FPGA_NUM_IRQS);
+ /* Setup an irq_domain structure */
+ socrates_fpga_pic_irq_host = irq_domain_add_linear(pic,
+ SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops, NULL);
if (socrates_fpga_pic_irq_host == NULL) {
pr_err("FPGA PIC: Unable to allocate host\n");
return;
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 94594e5..af3fd69 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -50,7 +50,7 @@
static DEFINE_RAW_SPINLOCK(gef_pic_lock);
static void __iomem *gef_pic_irq_reg_base;
-static struct irq_host *gef_pic_irq_host;
+static struct irq_domain *gef_pic_irq_host;
static int gef_pic_cascade_irq;
/*
@@ -153,7 +153,7 @@
/* When an interrupt is being configured, this call allows some flexibilty
* in deciding which irq_chip structure is used
*/
-static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
+static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
@@ -163,7 +163,7 @@
return 0;
}
-static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int gef_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
@@ -177,7 +177,7 @@
return 0;
}
-static struct irq_host_ops gef_pic_host_ops = {
+static const struct irq_domain_ops gef_pic_host_ops = {
.map = gef_pic_host_map,
.xlate = gef_pic_host_xlate,
};
@@ -211,10 +211,9 @@
return;
}
- /* Setup an irq_host structure */
- gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- GEF_PIC_NUM_IRQS,
- &gef_pic_host_ops, NO_IRQ);
+ /* Setup an irq_domain structure */
+ gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
+ &gef_pic_host_ops, NULL);
if (gef_pic_irq_host == NULL)
return;
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 40a6e34..db360fc 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -67,7 +67,7 @@
struct axon_msic {
- struct irq_host *irq_host;
+ struct irq_domain *irq_domain;
__le32 *fifo_virt;
dma_addr_t fifo_phys;
dcr_host_t dcr_host;
@@ -152,7 +152,7 @@
static struct axon_msic *find_msi_translator(struct pci_dev *dev)
{
- struct irq_host *irq_host;
+ struct irq_domain *irq_domain;
struct device_node *dn, *tmp;
const phandle *ph;
struct axon_msic *msic = NULL;
@@ -184,14 +184,14 @@
goto out_error;
}
- irq_host = irq_find_host(dn);
- if (!irq_host) {
- dev_dbg(&dev->dev, "axon_msi: no irq_host found for node %s\n",
+ irq_domain = irq_find_host(dn);
+ if (!irq_domain) {
+ dev_dbg(&dev->dev, "axon_msi: no irq_domain found for node %s\n",
dn->full_name);
goto out_error;
}
- msic = irq_host->host_data;
+ msic = irq_domain->host_data;
out_error:
of_node_put(dn);
@@ -280,7 +280,7 @@
BUILD_BUG_ON(NR_IRQS > 65536);
list_for_each_entry(entry, &dev->msi_list, list) {
- virq = irq_create_direct_mapping(msic->irq_host);
+ virq = irq_create_direct_mapping(msic->irq_domain);
if (virq == NO_IRQ) {
dev_warn(&dev->dev,
"axon_msi: virq allocation failed!\n");
@@ -318,7 +318,7 @@
.name = "AXON-MSI",
};
-static int msic_host_map(struct irq_host *h, unsigned int virq,
+static int msic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_data(virq, h->host_data);
@@ -327,7 +327,7 @@
return 0;
}
-static struct irq_host_ops msic_host_ops = {
+static const struct irq_domain_ops msic_host_ops = {
.map = msic_host_map,
};
@@ -337,7 +337,7 @@
u32 tmp;
pr_devel("axon_msi: disabling %s\n",
- msic->irq_host->of_node->full_name);
+ msic->irq_domain->of_node->full_name);
tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
msic_dcr_write(msic, MSIC_CTRL_REG, tmp);
@@ -392,16 +392,13 @@
}
memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
- msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
- NR_IRQS, &msic_host_ops, 0);
- if (!msic->irq_host) {
- printk(KERN_ERR "axon_msi: couldn't allocate irq_host for %s\n",
+ msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic);
+ if (!msic->irq_domain) {
+ printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
dn->full_name);
goto out_free_fifo;
}
- msic->irq_host->host_data = msic;
-
irq_set_handler_data(virq, msic);
irq_set_chained_handler(virq, axon_msi_cascade);
pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 55015e1..e5c3a2c 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -34,7 +34,7 @@
static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64];
static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64];
-static struct irq_host *beatic_host;
+static struct irq_domain *beatic_host;
/*
* In this implementation, "virq" == "IRQ plug number",
@@ -122,7 +122,7 @@
*
* Note that the number (virq) is already assigned at upper layer.
*/
-static void beatic_pic_host_unmap(struct irq_host *h, unsigned int virq)
+static void beatic_pic_host_unmap(struct irq_domain *h, unsigned int virq)
{
beat_destruct_irq_plug(virq);
}
@@ -133,7 +133,7 @@
*
* Note that the number (virq) is already assigned at upper layer.
*/
-static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
+static int beatic_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
int64_t err;
@@ -154,7 +154,7 @@
* Called from irq_create_of_mapping() only.
* Note: We have only 1 entry to translate.
*/
-static int beatic_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int beatic_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
@@ -166,13 +166,13 @@
return 0;
}
-static int beatic_pic_host_match(struct irq_host *h, struct device_node *np)
+static int beatic_pic_host_match(struct irq_domain *h, struct device_node *np)
{
/* Match all */
return 1;
}
-static struct irq_host_ops beatic_pic_host_ops = {
+static const struct irq_domain_ops beatic_pic_host_ops = {
.map = beatic_pic_host_map,
.unmap = beatic_pic_host_unmap,
.xlate = beatic_pic_host_xlate,
@@ -239,9 +239,7 @@
ppc_md.get_irq = beatic_get_irq;
/* Allocate an irq host */
- beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
- &beatic_pic_host_ops,
- 0);
+ beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL);
BUG_ON(beatic_host == NULL);
irq_set_default_host(beatic_host);
}
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 96a433d..2d42f3b 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -56,7 +56,7 @@
static DEFINE_PER_CPU(struct iic, cpu_iic);
#define IIC_NODE_COUNT 2
-static struct irq_host *iic_host;
+static struct irq_domain *iic_host;
/* Convert between "pending" bits and hw irq number */
static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
@@ -186,7 +186,7 @@
out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - msg) << 4);
}
-struct irq_host *iic_get_irq_host(int node)
+struct irq_domain *iic_get_irq_host(int node)
{
return iic_host;
}
@@ -222,13 +222,13 @@
#endif /* CONFIG_SMP */
-static int iic_host_match(struct irq_host *h, struct device_node *node)
+static int iic_host_match(struct irq_domain *h, struct device_node *node)
{
return of_device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
-static int iic_host_map(struct irq_host *h, unsigned int virq,
+static int iic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
switch (hw & IIC_IRQ_TYPE_MASK) {
@@ -245,7 +245,7 @@
return 0;
}
-static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int iic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -285,7 +285,7 @@
return 0;
}
-static struct irq_host_ops iic_host_ops = {
+static const struct irq_domain_ops iic_host_ops = {
.match = iic_host_match,
.map = iic_host_map,
.xlate = iic_host_xlate,
@@ -378,8 +378,8 @@
void __init iic_init_IRQ(void)
{
/* Setup an irq host data structure */
- iic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_LINEAR, IIC_SOURCE_COUNT,
- &iic_host_ops, IIC_IRQ_INVALID);
+ iic_host = irq_domain_add_linear(NULL, IIC_SOURCE_COUNT, &iic_host_ops,
+ NULL);
BUG_ON(iic_host == NULL);
irq_set_default_host(iic_host);
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 442c28c..d8b7cc8 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -62,7 +62,7 @@
#define SPIDER_IRQ_INVALID 63
struct spider_pic {
- struct irq_host *host;
+ struct irq_domain *host;
void __iomem *regs;
unsigned int node_id;
};
@@ -168,7 +168,7 @@
.irq_set_type = spider_set_irq_type,
};
-static int spider_host_map(struct irq_host *h, unsigned int virq,
+static int spider_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_data(virq, h->host_data);
@@ -180,7 +180,7 @@
return 0;
}
-static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
+static int spider_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -194,7 +194,7 @@
return 0;
}
-static struct irq_host_ops spider_host_ops = {
+static const struct irq_domain_ops spider_host_ops = {
.map = spider_host_map,
.xlate = spider_host_xlate,
};
@@ -299,12 +299,10 @@
panic("spider_pic: can't map registers !");
/* Allocate a host */
- pic->host = irq_alloc_host(of_node, IRQ_HOST_MAP_LINEAR,
- SPIDER_SRC_COUNT, &spider_host_ops,
- SPIDER_IRQ_INVALID);
+ pic->host = irq_domain_add_linear(of_node, SPIDER_SRC_COUNT,
+ &spider_host_ops, pic);
if (pic->host == NULL)
panic("spider_pic: can't allocate irq host !");
- pic->host->host_data = pic;
/* Go through all sources and disable them */
for (i = 0; i < SPIDER_SRC_COUNT; i++) {
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index f61a2dd..53d6eee0 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -96,9 +96,9 @@
*
*/
-static struct irq_host *flipper_irq_host;
+static struct irq_domain *flipper_irq_host;
-static int flipper_pic_map(struct irq_host *h, unsigned int virq,
+static int flipper_pic_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(virq, h->host_data);
@@ -107,13 +107,13 @@
return 0;
}
-static int flipper_pic_match(struct irq_host *h, struct device_node *np)
+static int flipper_pic_match(struct irq_domain *h, struct device_node *np)
{
return 1;
}
-static struct irq_host_ops flipper_irq_host_ops = {
+static const struct irq_domain_ops flipper_irq_domain_ops = {
.map = flipper_pic_map,
.match = flipper_pic_match,
};
@@ -130,10 +130,10 @@
out_be32(io_base + FLIPPER_ICR, 0xffffffff);
}
-struct irq_host * __init flipper_pic_init(struct device_node *np)
+struct irq_domain * __init flipper_pic_init(struct device_node *np)
{
struct device_node *pi;
- struct irq_host *irq_host = NULL;
+ struct irq_domain *irq_domain = NULL;
struct resource res;
void __iomem *io_base;
int retval;
@@ -159,17 +159,15 @@
__flipper_quiesce(io_base);
- irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS,
- &flipper_irq_host_ops, -1);
- if (!irq_host) {
- pr_err("failed to allocate irq_host\n");
+ irq_domain = irq_domain_add_linear(np, FLIPPER_NR_IRQS,
+ &flipper_irq_domain_ops, io_base);
+ if (!irq_domain) {
+ pr_err("failed to allocate irq_domain\n");
return NULL;
}
- irq_host->host_data = io_base;
-
out:
- return irq_host;
+ return irq_domain;
}
unsigned int flipper_pic_get_irq(void)
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index e491917..3006b51 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -89,9 +89,9 @@
*
*/
-static struct irq_host *hlwd_irq_host;
+static struct irq_domain *hlwd_irq_host;
-static int hlwd_pic_map(struct irq_host *h, unsigned int virq,
+static int hlwd_pic_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(virq, h->host_data);
@@ -100,11 +100,11 @@
return 0;
}
-static struct irq_host_ops hlwd_irq_host_ops = {
+static const struct irq_domain_ops hlwd_irq_domain_ops = {
.map = hlwd_pic_map,
};
-static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
+static unsigned int __hlwd_pic_get_irq(struct irq_domain *h)
{
void __iomem *io_base = h->host_data;
int irq;
@@ -123,14 +123,14 @@
struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
- struct irq_host *irq_host = irq_get_handler_data(cascade_virq);
+ struct irq_domain *irq_domain = irq_get_handler_data(cascade_virq);
unsigned int virq;
raw_spin_lock(&desc->lock);
chip->irq_mask(&desc->irq_data); /* IRQ_LEVEL */
raw_spin_unlock(&desc->lock);
- virq = __hlwd_pic_get_irq(irq_host);
+ virq = __hlwd_pic_get_irq(irq_domain);
if (virq != NO_IRQ)
generic_handle_irq(virq);
else
@@ -155,9 +155,9 @@
out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff);
}
-struct irq_host *hlwd_pic_init(struct device_node *np)
+struct irq_domain *hlwd_pic_init(struct device_node *np)
{
- struct irq_host *irq_host;
+ struct irq_domain *irq_domain;
struct resource res;
void __iomem *io_base;
int retval;
@@ -177,15 +177,14 @@
__hlwd_quiesce(io_base);
- irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS,
- &hlwd_irq_host_ops, -1);
- if (!irq_host) {
- pr_err("failed to allocate irq_host\n");
+ irq_domain = irq_domain_add_linear(np, HLWD_NR_IRQS,
+ &hlwd_irq_domain_ops, io_base);
+ if (!irq_domain) {
+ pr_err("failed to allocate irq_domain\n");
return NULL;
}
- irq_host->host_data = io_base;
- return irq_host;
+ return irq_domain;
}
unsigned int hlwd_pic_get_irq(void)
@@ -200,7 +199,7 @@
void hlwd_pic_probe(void)
{
- struct irq_host *host;
+ struct irq_domain *host;
struct device_node *np;
const u32 *interrupts;
int cascade_virq;
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index b210345..05ce516 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -342,7 +342,7 @@
#ifdef CONFIG_PCI
-static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
+static int iseries_irq_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
@@ -350,13 +350,13 @@
return 0;
}
-static int iseries_irq_host_match(struct irq_host *h, struct device_node *np)
+static int iseries_irq_host_match(struct irq_domain *h, struct device_node *np)
{
/* Match all */
return 1;
}
-static struct irq_host_ops iseries_irq_host_ops = {
+static const struct irq_domain_ops iseries_irq_domain_ops = {
.map = iseries_irq_host_map,
.match = iseries_irq_host_match,
};
@@ -368,7 +368,7 @@
void __init iSeries_init_IRQ(void)
{
/* Register PCI event handler and open an event path */
- struct irq_host *host;
+ struct irq_domain *host;
int ret;
/*
@@ -380,8 +380,7 @@
/* Create irq host. No need for a revmap since HV will give us
* back our virtual irq number
*/
- host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
- &iseries_irq_host_ops, 0);
+ host = irq_domain_add_nomap(NULL, &iseries_irq_domain_ops, NULL);
BUG_ON(host == NULL);
irq_set_default_host(host);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 7761aab..92afc38 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -61,7 +61,7 @@
static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
static int pmac_irq_cascade = -1;
-static struct irq_host *pmac_pic_host;
+static struct irq_domain *pmac_pic_host;
static void __pmac_retrigger(unsigned int irq_nr)
{
@@ -268,13 +268,13 @@
.name = "cascade",
};
-static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
+static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node)
{
/* We match all, we don't always have a node anyway */
return 1;
}
-static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
+static int pmac_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
if (hw >= max_irqs)
@@ -288,21 +288,10 @@
return 0;
}
-static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq,
- unsigned int *out_flags)
-
-{
- *out_flags = IRQ_TYPE_NONE;
- *out_hwirq = *intspec;
- return 0;
-}
-
-static struct irq_host_ops pmac_pic_host_ops = {
+static const struct irq_domain_ops pmac_pic_host_ops = {
.match = pmac_pic_host_match,
.map = pmac_pic_host_map,
- .xlate = pmac_pic_host_xlate,
+ .xlate = irq_domain_xlate_onecell,
};
static void __init pmac_pic_probe_oldstyle(void)
@@ -352,9 +341,8 @@
/*
* Allocate an irq host
*/
- pmac_pic_host = irq_alloc_host(master, IRQ_HOST_MAP_LINEAR, max_irqs,
- &pmac_pic_host_ops,
- max_irqs);
+ pmac_pic_host = irq_domain_add_linear(master, max_irqs,
+ &pmac_pic_host_ops, NULL);
BUG_ON(pmac_pic_host == NULL);
irq_set_default_host(pmac_pic_host);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 44d7692..a81e5a8 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -125,7 +125,7 @@
static int psurge_type = PSURGE_NONE;
/* irq for secondary cpus to report */
-static struct irq_host *psurge_host;
+static struct irq_domain *psurge_host;
int psurge_secondary_virq;
/*
@@ -176,7 +176,7 @@
psurge_set_ipi(cpu);
}
-static int psurge_host_map(struct irq_host *h, unsigned int virq,
+static int psurge_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq);
@@ -184,7 +184,7 @@
return 0;
}
-struct irq_host_ops psurge_host_ops = {
+static const struct irq_domain_ops psurge_host_ops = {
.map = psurge_host_map,
};
@@ -192,8 +192,7 @@
{
int rc = -ENOMEM;
- psurge_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
- &psurge_host_ops, 0);
+ psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL);
if (psurge_host)
psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 617efa1..2a4ff86 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -667,7 +667,7 @@
static void dump_bmp(struct ps3_private* pd) {};
#endif /* defined(DEBUG) */
-static int ps3_host_map(struct irq_host *h, unsigned int virq,
+static int ps3_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
@@ -678,13 +678,13 @@
return 0;
}
-static int ps3_host_match(struct irq_host *h, struct device_node *np)
+static int ps3_host_match(struct irq_domain *h, struct device_node *np)
{
/* Match all */
return 1;
}
-static struct irq_host_ops ps3_host_ops = {
+static const struct irq_domain_ops ps3_host_ops = {
.map = ps3_host_map,
.match = ps3_host_match,
};
@@ -751,10 +751,9 @@
{
int result;
unsigned cpu;
- struct irq_host *host;
+ struct irq_domain *host;
- host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0, &ps3_host_ops,
- PS3_INVALID_OUTLET);
+ host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL);
irq_set_default_host(host);
irq_set_virq_count(PS3_PLUG_MAX + 1);
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
index 19f353d..cb565bf 100644
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -30,7 +30,7 @@
static int opb_index = 0;
struct opb_pic {
- struct irq_host *host;
+ struct irq_domain *host;
void *regs;
int index;
spinlock_t lock;
@@ -179,7 +179,7 @@
.irq_set_type = opb_set_irq_type
};
-static int opb_host_map(struct irq_host *host, unsigned int virq,
+static int opb_host_map(struct irq_domain *host, unsigned int virq,
irq_hw_number_t hwirq)
{
struct opb_pic *opb;
@@ -196,20 +196,9 @@
return 0;
}
-static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
- /* Interrupt size must == 2 */
- BUG_ON(intsize != 2);
- *out_hwirq = intspec[0];
- *out_type = intspec[1];
- return 0;
-}
-
-static struct irq_host_ops opb_host_ops = {
+static const struct irq_domain_ops opb_host_ops = {
.map = opb_host_map,
- .xlate = opb_host_xlate,
+ .xlate = irq_domain_xlate_twocell,
};
irqreturn_t opb_irq_handler(int irq, void *private)
@@ -263,13 +252,11 @@
goto free_opb;
}
- /* Allocate an irq host so that Linux knows that despite only
+ /* Allocate an irq domain so that Linux knows that despite only
* having one interrupt to issue, we're the controller for multiple
* hardware IRQs, so later we can lookup their virtual IRQs. */
- opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
- OPB_NR_IRQS, &opb_host_ops, -1);
-
+ opb->host = irq_domain_add_linear(dn, OPB_NR_IRQS, &opb_host_ops, opb);
if (!opb->host) {
printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
goto free_regs;
@@ -277,7 +264,6 @@
opb->index = opb_index++;
spin_lock_init(&opb->lock);
- opb->host->host_data = opb;
/* Disable all interrupts by default */
opb_out(opb, OPB_MLSASIER, 0);
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 5d7d59a..d4fa03f 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -54,7 +54,7 @@
immap_t __iomem *mpc8xx_immr;
static cpic8xx_t __iomem *cpic_reg;
-static struct irq_host *cpm_pic_host;
+static struct irq_domain *cpm_pic_host;
static void cpm_mask_irq(struct irq_data *d)
{
@@ -98,7 +98,7 @@
return irq_linear_revmap(cpm_pic_host, cpm_vec);
}
-static int cpm_pic_host_map(struct irq_host *h, unsigned int virq,
+static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
@@ -123,7 +123,7 @@
.name = "error",
};
-static struct irq_host_ops cpm_pic_host_ops = {
+static const struct irq_domain_ops cpm_pic_host_ops = {
.map = cpm_pic_host_map,
};
@@ -164,8 +164,7 @@
out_be32(&cpic_reg->cpic_cimr, 0);
- cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- 64, &cpm_pic_host_ops, 64);
+ cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
if (cpm_pic_host == NULL) {
printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
sirq = NO_IRQ;
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index bcab50e..d3be961 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -50,7 +50,7 @@
static intctl_cpm2_t __iomem *cpm2_intctl;
-static struct irq_host *cpm2_pic_host;
+static struct irq_domain *cpm2_pic_host;
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
@@ -214,7 +214,7 @@
return irq_linear_revmap(cpm2_pic_host, irq);
}
-static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
+static int cpm2_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
@@ -224,21 +224,9 @@
return 0;
}
-static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-{
- *out_hwirq = intspec[0];
- if (intsize > 1)
- *out_flags = intspec[1];
- else
- *out_flags = IRQ_TYPE_NONE;
- return 0;
-}
-
-static struct irq_host_ops cpm2_pic_host_ops = {
+static const struct irq_domain_ops cpm2_pic_host_ops = {
.map = cpm2_pic_host_map,
- .xlate = cpm2_pic_host_xlate,
+ .xlate = irq_domain_xlate_onetwocell,
};
void cpm2_pic_init(struct device_node *node)
@@ -275,8 +263,7 @@
out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
/* create a legacy host */
- cpm2_pic_host = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- 64, &cpm2_pic_host_ops, 64);
+ cpm2_pic_host = irq_domain_add_linear(node, 64, &cpm2_pic_host_ops, NULL);
if (cpm2_pic_host == NULL) {
printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
return;
diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c
index b6731e4..6e0e100 100644
--- a/arch/powerpc/sysdev/ehv_pic.c
+++ b/arch/powerpc/sysdev/ehv_pic.c
@@ -182,13 +182,13 @@
return irq_linear_revmap(global_ehv_pic->irqhost, irq);
}
-static int ehv_pic_host_match(struct irq_host *h, struct device_node *node)
+static int ehv_pic_host_match(struct irq_domain *h, struct device_node *node)
{
/* Exact match, unless ehv_pic node is NULL */
return h->of_node == NULL || h->of_node == node;
}
-static int ehv_pic_host_map(struct irq_host *h, unsigned int virq,
+static int ehv_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct ehv_pic *ehv_pic = h->host_data;
@@ -217,7 +217,7 @@
return 0;
}
-static int ehv_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int ehv_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -248,7 +248,7 @@
return 0;
}
-static struct irq_host_ops ehv_pic_host_ops = {
+static const struct irq_domain_ops ehv_pic_host_ops = {
.match = ehv_pic_host_match,
.map = ehv_pic_host_map,
.xlate = ehv_pic_host_xlate,
@@ -275,9 +275,8 @@
return;
}
- ehv_pic->irqhost = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- NR_EHV_PIC_INTS, &ehv_pic_host_ops, 0);
-
+ ehv_pic->irqhost = irq_domain_add_linear(np, NR_EHV_PIC_INTS,
+ &ehv_pic_host_ops, ehv_pic);
if (!ehv_pic->irqhost) {
of_node_put(np);
kfree(ehv_pic);
@@ -293,7 +292,6 @@
of_node_put(np2);
}
- ehv_pic->irqhost->host_data = ehv_pic;
ehv_pic->hc_irq = ehv_pic_irq_chip;
ehv_pic->hc_irq.irq_set_affinity = ehv_pic_set_affinity;
ehv_pic->coreint_flag = coreint_flag;
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index ecb5c19..0c01deb 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -60,7 +60,7 @@
.name = "FSL-MSI",
};
-static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
+static int fsl_msi_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct fsl_msi *msi_data = h->host_data;
@@ -74,7 +74,7 @@
return 0;
}
-static struct irq_host_ops fsl_msi_host_ops = {
+static const struct irq_domain_ops fsl_msi_host_ops = {
.map = fsl_msi_host_map,
};
@@ -387,8 +387,8 @@
}
platform_set_drvdata(dev, msi);
- msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
- NR_MSI_IRQS, &fsl_msi_host_ops, 0);
+ msi->irqhost = irq_domain_add_linear(dev->dev.of_node,
+ NR_MSI_IRQS, &fsl_msi_host_ops, msi);
if (msi->irqhost == NULL) {
dev_err(&dev->dev, "No memory for MSI irqhost\n");
@@ -420,8 +420,6 @@
msi->feature = features->fsl_pic_ip;
- msi->irqhost->host_data = msi;
-
/*
* Remember the phandle, so that we can match with any PCI nodes
* that have an "fsl,msi" property.
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index f6c646a..8225f86 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -26,7 +26,7 @@
#define FSL_PIC_IP_VMPIC 0x00000003
struct fsl_msi {
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
unsigned long cascade_irq;
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index d18bb27..997df6a 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -25,7 +25,7 @@
static DEFINE_RAW_SPINLOCK(i8259_lock);
-static struct irq_host *i8259_host;
+static struct irq_domain *i8259_host;
/*
* Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -163,12 +163,12 @@
.flags = IORESOURCE_BUSY,
};
-static int i8259_host_match(struct irq_host *h, struct device_node *node)
+static int i8259_host_match(struct irq_domain *h, struct device_node *node)
{
return h->of_node == NULL || h->of_node == node;
}
-static int i8259_host_map(struct irq_host *h, unsigned int virq,
+static int i8259_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
@@ -185,7 +185,7 @@
return 0;
}
-static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
+static int i8259_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
@@ -205,13 +205,13 @@
return 0;
}
-static struct irq_host_ops i8259_host_ops = {
+static struct irq_domain_ops i8259_host_ops = {
.match = i8259_host_match,
.map = i8259_host_map,
.xlate = i8259_host_xlate,
};
-struct irq_host *i8259_get_host(void)
+struct irq_domain *i8259_get_host(void)
{
return i8259_host;
}
@@ -263,8 +263,7 @@
raw_spin_unlock_irqrestore(&i8259_lock, flags);
/* create a legacy host */
- i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
- 0, &i8259_host_ops, 0);
+ i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
if (i8259_host == NULL) {
printk(KERN_ERR "i8259: failed to allocate irq host !\n");
return;
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 95da897..b50f978 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -672,13 +672,13 @@
.irq_set_type = ipic_set_irq_type,
};
-static int ipic_host_match(struct irq_host *h, struct device_node *node)
+static int ipic_host_match(struct irq_domain *h, struct device_node *node)
{
/* Exact match, unless ipic node is NULL */
return h->of_node == NULL || h->of_node == node;
}
-static int ipic_host_map(struct irq_host *h, unsigned int virq,
+static int ipic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct ipic *ipic = h->host_data;
@@ -692,26 +692,10 @@
return 0;
}
-static int ipic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-
-{
- /* interrupt sense values coming from the device tree equal either
- * LEVEL_LOW (low assertion) or EDGE_FALLING (high-to-low change)
- */
- *out_hwirq = intspec[0];
- if (intsize > 1)
- *out_flags = intspec[1];
- else
- *out_flags = IRQ_TYPE_NONE;
- return 0;
-}
-
-static struct irq_host_ops ipic_host_ops = {
+static struct irq_domain_ops ipic_host_ops = {
.match = ipic_host_match,
.map = ipic_host_map,
- .xlate = ipic_host_xlate,
+ .xlate = irq_domain_xlate_onetwocell,
};
struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
@@ -728,9 +712,8 @@
if (ipic == NULL)
return NULL;
- ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- NR_IPIC_INTS,
- &ipic_host_ops, 0);
+ ipic->irqhost = irq_domain_add_linear(node, NR_IPIC_INTS,
+ &ipic_host_ops, ipic);
if (ipic->irqhost == NULL) {
kfree(ipic);
return NULL;
@@ -738,8 +721,6 @@
ipic->regs = ioremap(res.start, resource_size(&res));
- ipic->irqhost->host_data = ipic;
-
/* init hw */
ipic_write(ipic->regs, IPIC_SICNR, 0x0);
diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h
index 9391c57..90031d1 100644
--- a/arch/powerpc/sysdev/ipic.h
+++ b/arch/powerpc/sysdev/ipic.h
@@ -43,7 +43,7 @@
volatile u32 __iomem *regs;
/* The remapper for this IPIC */
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
};
struct ipic_info {
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 2ca0a85..d5f5416 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -17,7 +17,7 @@
extern int cpm_get_irq(struct pt_regs *regs);
-static struct irq_host *mpc8xx_pic_host;
+static struct irq_domain *mpc8xx_pic_host;
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
static sysconf8xx_t __iomem *siu_reg;
@@ -110,7 +110,7 @@
}
-static int mpc8xx_pic_host_map(struct irq_host *h, unsigned int virq,
+static int mpc8xx_pic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("mpc8xx_pic_host_map(%d, 0x%lx)\n", virq, hw);
@@ -121,7 +121,7 @@
}
-static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
@@ -142,7 +142,7 @@
}
-static struct irq_host_ops mpc8xx_pic_host_ops = {
+static struct irq_domain_ops mpc8xx_pic_host_ops = {
.map = mpc8xx_pic_host_map,
.xlate = mpc8xx_pic_host_xlate,
};
@@ -171,8 +171,7 @@
goto out;
}
- mpc8xx_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- 64, &mpc8xx_pic_host_ops, 64);
+ mpc8xx_pic_host = irq_domain_add_linear(np, 64, &mpc8xx_pic_host_ops, NULL);
if (mpc8xx_pic_host == NULL) {
printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
ret = -ENOMEM;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 4e9ccb1..c83a512 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -965,13 +965,13 @@
#endif /* CONFIG_MPIC_U3_HT_IRQS */
-static int mpic_host_match(struct irq_host *h, struct device_node *node)
+static int mpic_host_match(struct irq_domain *h, struct device_node *node)
{
/* Exact match, unless mpic node is NULL */
return h->of_node == NULL || h->of_node == node;
}
-static int mpic_host_map(struct irq_host *h, unsigned int virq,
+static int mpic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct mpic *mpic = h->host_data;
@@ -1041,7 +1041,7 @@
return 0;
}
-static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
+static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -1121,13 +1121,13 @@
BUG_ON(!(mpic->flags & MPIC_SECONDARY));
virq = mpic_get_one_irq(mpic);
- if (virq != NO_IRQ)
+ if (virq)
generic_handle_irq(virq);
chip->irq_eoi(&desc->irq_data);
}
-static struct irq_host_ops mpic_host_ops = {
+static struct irq_domain_ops mpic_host_ops = {
.match = mpic_host_match,
.map = mpic_host_map,
.xlate = mpic_host_xlate,
@@ -1345,10 +1345,9 @@
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
- mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR,
+ mpic->irqhost = irq_domain_add_linear(mpic->node,
isu_size ? isu_size : mpic->num_sources,
- &mpic_host_ops,
- flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+ &mpic_host_ops, mpic);
/*
* FIXME: The code leaks the MPIC object and mappings here; this
@@ -1357,8 +1356,6 @@
if (mpic->irqhost == NULL)
return NULL;
- mpic->irqhost->host_data = mpic;
-
/* Display version */
switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index 0f67cd7..0622aa9 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -32,7 +32,7 @@
static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
{
irq_hw_number_t hwirq;
- struct irq_host_ops *ops = mpic->irqhost->ops;
+ const struct irq_domain_ops *ops = mpic->irqhost->ops;
struct device_node *np;
int flags, index, i;
struct of_irq oirq;
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index 14d1302..8848e99 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -70,7 +70,7 @@
static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS;
static u32 mv64x60_cached_gpp_mask;
-static struct irq_host *mv64x60_irq_host;
+static struct irq_domain *mv64x60_irq_host;
/*
* mv64x60_chip_low functions
@@ -208,7 +208,7 @@
[MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp,
};
-static int mv64x60_host_map(struct irq_host *h, unsigned int virq,
+static int mv64x60_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
int level1;
@@ -223,7 +223,7 @@
return 0;
}
-static struct irq_host_ops mv64x60_host_ops = {
+static struct irq_domain_ops mv64x60_host_ops = {
.map = mv64x60_host_map,
};
@@ -250,9 +250,8 @@
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
- mv64x60_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- MV64x60_NUM_IRQS,
- &mv64x60_host_ops, MV64x60_NUM_IRQS);
+ mv64x60_irq_host = irq_domain_add_linear(np, MV64x60_NUM_IRQS,
+ &mv64x60_host_ops, NULL);
spin_lock_irqsave(&mv64x60_lock, flags);
out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 73034bd..2fba6ef 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -245,13 +245,13 @@
.irq_mask_ack = qe_ic_mask_irq,
};
-static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node)
{
/* Exact match, unless qe_ic node is NULL */
return h->of_node == NULL || h->of_node == node;
}
-static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct qe_ic *qe_ic = h->host_data;
@@ -272,23 +272,10 @@
return 0;
}
-static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 * intspec, unsigned int intsize,
- irq_hw_number_t * out_hwirq,
- unsigned int *out_flags)
-{
- *out_hwirq = intspec[0];
- if (intsize > 1)
- *out_flags = intspec[1];
- else
- *out_flags = IRQ_TYPE_NONE;
- return 0;
-}
-
-static struct irq_host_ops qe_ic_host_ops = {
+static struct irq_domain_ops qe_ic_host_ops = {
.match = qe_ic_host_match,
.map = qe_ic_host_map,
- .xlate = qe_ic_host_xlate,
+ .xlate = irq_domain_xlate_onetwocell,
};
/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
@@ -339,8 +326,8 @@
if (qe_ic == NULL)
return;
- qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- NR_QE_IC_INTS, &qe_ic_host_ops, 0);
+ qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+ &qe_ic_host_ops, qe_ic);
if (qe_ic->irqhost == NULL) {
kfree(qe_ic);
return;
@@ -348,7 +335,6 @@
qe_ic->regs = ioremap(res.start, resource_size(&res));
- qe_ic->irqhost->host_data = qe_ic;
qe_ic->hc_irq = qe_ic_irq_chip;
qe_ic->virq_high = irq_of_parse_and_map(node, 0);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
index c1361d0..c327872 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.h
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h
@@ -79,7 +79,7 @@
volatile u32 __iomem *regs;
/* The remapper for this QEIC */
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 4d18658..188012c 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -51,7 +51,7 @@
u32 tsi108_pci_cfg_base;
static u32 tsi108_pci_cfg_phys;
u32 tsi108_csr_vir_base;
-static struct irq_host *pci_irq_host;
+static struct irq_domain *pci_irq_host;
extern u32 get_vir_csrbase(void);
extern u32 tsi108_read_reg(u32 reg_offset);
@@ -376,7 +376,7 @@
.irq_unmask = tsi108_pci_irq_unmask,
};
-static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
+static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
@@ -385,7 +385,7 @@
return 0;
}
-static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
+static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{ unsigned int irq;
DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
@@ -397,7 +397,7 @@
return 0;
}
-static struct irq_host_ops pci_irq_host_ops = {
+static struct irq_domain_ops pci_irq_domain_ops = {
.map = pci_irq_host_map,
.xlate = pci_irq_host_xlate,
};
@@ -419,10 +419,9 @@
{
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
- pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
- 0, &pci_irq_host_ops, 0);
+ pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL);
if (pci_irq_host == NULL) {
- printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
+ printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
return;
}
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 063c901..9203393 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -49,7 +49,7 @@
raw_spinlock_t lock;
/* The remapper for this UIC */
- struct irq_host *irqhost;
+ struct irq_domain *irqhost;
};
static void uic_unmask_irq(struct irq_data *d)
@@ -174,7 +174,7 @@
.irq_set_type = uic_set_irq_type,
};
-static int uic_host_map(struct irq_host *h, unsigned int virq,
+static int uic_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct uic *uic = h->host_data;
@@ -190,21 +190,9 @@
return 0;
}
-static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type)
-
-{
- /* UIC intspecs must have 2 cells */
- BUG_ON(intsize != 2);
- *out_hwirq = intspec[0];
- *out_type = intspec[1];
- return 0;
-}
-
-static struct irq_host_ops uic_host_ops = {
+static struct irq_domain_ops uic_host_ops = {
.map = uic_host_map,
- .xlate = uic_host_xlate,
+ .xlate = irq_domain_xlate_twocell,
};
void uic_irq_cascade(unsigned int virq, struct irq_desc *desc)
@@ -270,13 +258,11 @@
}
uic->dcrbase = *dcrreg;
- uic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- NR_UIC_INTS, &uic_host_ops, -1);
+ uic->irqhost = irq_domain_add_linear(node, NR_UIC_INTS, &uic_host_ops,
+ uic);
if (! uic->irqhost)
return NULL; /* FIXME: panic? */
- uic->irqhost->host_data = uic;
-
/* Start with all interrupts disabled, level and non-critical */
mtdcr(uic->dcrbase + UIC_ER, 0);
mtdcr(uic->dcrbase + UIC_CR, 0);
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index d72eda6..ea5e204 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -40,7 +40,7 @@
DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
-struct irq_host *xics_host;
+struct irq_domain *xics_host;
static LIST_HEAD(ics_list);
@@ -212,16 +212,16 @@
/* We can't set affinity on ISA interrupts */
if (virq < NUM_ISA_INTERRUPTS)
continue;
- if (!virq_is_host(virq, xics_host))
- continue;
- irq = (unsigned int)virq_to_hw(virq);
- /* We need to get IPIs still. */
- if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
- continue;
desc = irq_to_desc(virq);
/* We only need to migrate enabled IRQS */
if (!desc || !desc->action)
continue;
+ if (desc->irq_data.domain != xics_host)
+ continue;
+ irq = desc->irq_data.hwirq;
+ /* We need to get IPIs still. */
+ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+ continue;
chip = irq_desc_get_chip(desc);
if (!chip || !chip->irq_set_affinity)
continue;
@@ -301,7 +301,7 @@
}
#endif /* CONFIG_SMP */
-static int xics_host_match(struct irq_host *h, struct device_node *node)
+static int xics_host_match(struct irq_domain *h, struct device_node *node)
{
struct ics *ics;
@@ -323,7 +323,7 @@
.irq_unmask = xics_ipi_unmask,
};
-static int xics_host_map(struct irq_host *h, unsigned int virq,
+static int xics_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct ics *ics;
@@ -351,7 +351,7 @@
return -EINVAL;
}
-static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+static int xics_host_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -366,7 +366,7 @@
return 0;
}
-static struct irq_host_ops xics_host_ops = {
+static struct irq_domain_ops xics_host_ops = {
.match = xics_host_match,
.map = xics_host_map,
.xlate = xics_host_xlate,
@@ -374,8 +374,7 @@
static void __init xics_init_host(void)
{
- xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
- XICS_IRQ_SPURIOUS);
+ xics_host = irq_domain_add_tree(NULL, &xics_host_ops, NULL);
BUG_ON(xics_host == NULL);
irq_set_default_host(xics_host);
}
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 6183799..8d73c3c 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -40,7 +40,7 @@
#define XINTC_IVR 24 /* Interrupt Vector */
#define XINTC_MER 28 /* Master Enable */
-static struct irq_host *master_irqhost;
+static struct irq_domain *master_irqhost;
#define XILINX_INTC_MAXIRQS (32)
@@ -141,7 +141,7 @@
/**
* xilinx_intc_xlate - translate virq# from device tree interrupts property
*/
-static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+static int xilinx_intc_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
@@ -161,7 +161,7 @@
return 0;
}
-static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
+static int xilinx_intc_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t irq)
{
irq_set_chip_data(virq, h->host_data);
@@ -177,15 +177,15 @@
return 0;
}
-static struct irq_host_ops xilinx_intc_ops = {
+static struct irq_domain_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
.xlate = xilinx_intc_xlate,
};
-struct irq_host * __init
+struct irq_domain * __init
xilinx_intc_init(struct device_node *np)
{
- struct irq_host * irq;
+ struct irq_domain * irq;
void * regs;
/* Find and map the intc registers */
@@ -200,12 +200,11 @@
out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
- /* Allocate and initialize an irq_host structure. */
- irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
- &xilinx_intc_ops, -1);
+ /* Allocate and initialize an irq_domain structure. */
+ irq = irq_domain_add_linear(np, XILINX_INTC_MAXIRQS, &xilinx_intc_ops,
+ regs);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
- irq->host_data = regs;
return irq;
}
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index edd3d3cde..c287651 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -22,6 +22,7 @@
#include <linux/proc_fs.h>
#include <linux/mutex.h>
#include <linux/atomic.h>
+#include <linux/irqdomain.h>
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
@@ -55,15 +56,6 @@
extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
-/* These routines are here to provide compatibility with how powerpc
- * handles IRQ mapping for OF device nodes. We precompute and permanently
- * register them in the platform_device objects, whereas powerpc computes them
- * on request.
- */
-static inline void irq_dispose_mapping(unsigned int virq)
-{
-}
-
extern struct device_node *of_console_device;
extern char *of_console_path;
extern char *of_console_options;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5bed94e..e0829a6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -398,6 +398,7 @@
select X86_REBOOTFIXUPS
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
---help---
Select for the Intel CE media processor (CE4100) SOC.
This option compiles in support for the CE4100 SOC for settop
@@ -2076,6 +2077,7 @@
select GPIOLIB
select OF
select OF_PROMTREE
+ select IRQ_DOMAIN
---help---
Add support for detecting the unique features of the OLPC
XO hardware.
diff --git a/arch/x86/include/asm/irq_controller.h b/arch/x86/include/asm/irq_controller.h
deleted file mode 100644
index 423bbbd..0000000
--- a/arch/x86/include/asm/irq_controller.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __IRQ_CONTROLLER__
-#define __IRQ_CONTROLLER__
-
-struct irq_domain {
- int (*xlate)(struct irq_domain *h, const u32 *intspec, u32 intsize,
- u32 *out_hwirq, u32 *out_type);
- void *priv;
- struct device_node *controller;
- struct list_head l;
-};
-
-#endif
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index 644dd885..60bef66 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/setup.h>
-#include <asm/irq_controller.h>
#ifdef CONFIG_OF
extern int of_ioapic;
@@ -43,15 +42,6 @@
#define pci_address_to_pio pci_address_to_pio
unsigned long pci_address_to_pio(phys_addr_t addr);
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- *
- * FIXME: We really should implement proper virq handling like power,
- * but that's going to be major surgery.
- */
-static inline void irq_dispose_mapping(unsigned int virq) { }
-
#define HAVE_ARCH_DEVTREE_FIXUPS
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 5282179..3ae2ced 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -4,6 +4,7 @@
#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/of.h>
@@ -17,64 +18,14 @@
#include <linux/initrd.h>
#include <asm/hpet.h>
-#include <asm/irq_controller.h>
#include <asm/apic.h>
#include <asm/pci_x86.h>
__initdata u64 initial_dtb;
char __initdata cmd_line[COMMAND_LINE_SIZE];
-static LIST_HEAD(irq_domains);
-static DEFINE_RAW_SPINLOCK(big_irq_lock);
int __initdata of_ioapic;
-#ifdef CONFIG_X86_IO_APIC
-static void add_interrupt_host(struct irq_domain *ih)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&big_irq_lock, flags);
- list_add(&ih->l, &irq_domains);
- raw_spin_unlock_irqrestore(&big_irq_lock, flags);
-}
-#endif
-
-static struct irq_domain *get_ih_from_node(struct device_node *controller)
-{
- struct irq_domain *ih, *found = NULL;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&big_irq_lock, flags);
- list_for_each_entry(ih, &irq_domains, l) {
- if (ih->controller == controller) {
- found = ih;
- break;
- }
- }
- raw_spin_unlock_irqrestore(&big_irq_lock, flags);
- return found;
-}
-
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- struct irq_domain *ih;
- u32 virq, type;
- int ret;
-
- ih = get_ih_from_node(controller);
- if (!ih)
- return 0;
- ret = ih->xlate(ih, intspec, intsize, &virq, &type);
- if (ret)
- return 0;
- if (type == IRQ_TYPE_NONE)
- return virq;
- irq_set_irq_type(virq, type);
- return virq;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-
unsigned long pci_address_to_pio(phys_addr_t address)
{
/*
@@ -354,36 +305,43 @@
},
};
-static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
- u32 *out_hwirq, u32 *out_type)
+static int ioapic_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec, u32 intsize,
+ irq_hw_number_t *out_hwirq, u32 *out_type)
{
- struct mp_ioapic_gsi *gsi_cfg;
struct io_apic_irq_attr attr;
struct of_ioapic_type *it;
- u32 line, idx, type;
+ u32 line, idx;
+ int rc;
- if (intsize < 2)
+ if (WARN_ON(intsize < 2))
return -EINVAL;
- line = *intspec;
- idx = (u32) id->priv;
- gsi_cfg = mp_ioapic_gsi_routing(idx);
- *out_hwirq = line + gsi_cfg->gsi_base;
+ line = intspec[0];
- intspec++;
- type = *intspec;
-
- if (type >= ARRAY_SIZE(of_ioapic_type))
+ if (intspec[1] >= ARRAY_SIZE(of_ioapic_type))
return -EINVAL;
- it = of_ioapic_type + type;
- *out_type = it->out_type;
+ it = &of_ioapic_type[intspec[1]];
+ idx = (u32) domain->host_data;
set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
- return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr);
+ rc = io_apic_setup_irq_pin_once(irq_find_mapping(domain, line),
+ cpu_to_node(0), &attr);
+ if (rc)
+ return rc;
+
+ *out_hwirq = line;
+ *out_type = it->out_type;
+ return 0;
}
+const struct irq_domain_ops ioapic_irq_domain_ops = {
+ .xlate = ioapic_xlate,
+};
+
static void __init ioapic_add_ofnode(struct device_node *np)
{
struct resource r;
@@ -399,13 +357,14 @@
for (i = 0; i < nr_ioapics; i++) {
if (r.start == mpc_ioapic_addr(i)) {
struct irq_domain *id;
+ struct mp_ioapic_gsi *gsi_cfg;
- id = kzalloc(sizeof(*id), GFP_KERNEL);
+ gsi_cfg = mp_ioapic_gsi_routing(i);
+
+ id = irq_domain_add_legacy(np, 32, gsi_cfg->gsi_base, 0,
+ &ioapic_irq_domain_ops,
+ (void*)i);
BUG_ON(!id);
- id->controller = np;
- id->xlate = ioapic_xlate;
- id->priv = (void *)i;
- add_interrupt_host(id);
return;
}
}
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 54eaf96..01c2cf4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -497,37 +497,22 @@
}
/**
- * amba_device_register - register an AMBA device
- * @dev: AMBA device to register
- * @parent: parent memory resource
+ * amba_device_add - add a previously allocated AMBA device structure
+ * @dev: AMBA device allocated by amba_device_alloc
+ * @parent: resource parent for this devices resources
*
- * Setup the AMBA device, reading the cell ID if present.
- * Claim the resource, and register the AMBA device with
- * the Linux device manager.
+ * Claim the resource, and read the device cell ID if not already
+ * initialized. Register the AMBA device with the Linux device
+ * manager.
*/
-int amba_device_register(struct amba_device *dev, struct resource *parent)
+int amba_device_add(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
- device_initialize(&dev->dev);
-
- /*
- * Copy from device_add
- */
- if (dev->dev.init_name) {
- dev_set_name(&dev->dev, "%s", dev->dev.init_name);
- dev->dev.init_name = NULL;
- }
-
- dev->dev.release = amba_device_release;
- dev->dev.bus = &amba_bustype;
- dev->dev.dma_mask = &dev->dma_mask;
- dev->res.name = dev_name(&dev->dev);
-
- if (!dev->dev.coherent_dma_mask && dev->dma_mask)
- dev_warn(&dev->dev, "coherent dma mask is unset\n");
+ WARN_ON(dev->irq[0] == (unsigned int)-1);
+ WARN_ON(dev->irq[1] == (unsigned int)-1);
ret = request_resource(parent, &dev->res);
if (ret)
@@ -582,9 +567,9 @@
if (ret)
goto err_release;
- if (dev->irq[0] != NO_IRQ)
+ if (dev->irq[0] && dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
- if (ret == 0 && dev->irq[1] != NO_IRQ)
+ if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
@@ -596,6 +581,74 @@
err_out:
return ret;
}
+EXPORT_SYMBOL_GPL(amba_device_add);
+
+static void amba_device_initialize(struct amba_device *dev, const char *name)
+{
+ device_initialize(&dev->dev);
+ if (name)
+ dev_set_name(&dev->dev, "%s", name);
+ dev->dev.release = amba_device_release;
+ dev->dev.bus = &amba_bustype;
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->res.name = dev_name(&dev->dev);
+}
+
+/**
+ * amba_device_alloc - allocate an AMBA device
+ * @name: sysfs name of the AMBA device
+ * @base: base of AMBA device
+ * @size: size of AMBA device
+ *
+ * Allocate and initialize an AMBA device structure. Returns %NULL
+ * on failure.
+ */
+struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
+ size_t size)
+{
+ struct amba_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev) {
+ amba_device_initialize(dev, name);
+ dev->res.start = base;
+ dev->res.end = base + size - 1;
+ dev->res.flags = IORESOURCE_MEM;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(amba_device_alloc);
+
+/**
+ * amba_device_register - register an AMBA device
+ * @dev: AMBA device to register
+ * @parent: parent memory resource
+ *
+ * Setup the AMBA device, reading the cell ID if present.
+ * Claim the resource, and register the AMBA device with
+ * the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+ amba_device_initialize(dev, dev->dev.init_name);
+ dev->dev.init_name = NULL;
+
+ if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+ dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+ return amba_device_add(dev, parent);
+}
+
+/**
+ * amba_device_put - put an AMBA device
+ * @dev: AMBA device to put
+ */
+void amba_device_put(struct amba_device *dev)
+{
+ put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(amba_device_put);
/**
* amba_device_unregister - unregister an AMBA device
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 978bbf7..939109b 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1171,6 +1171,38 @@
}
/**
+ * __pm_genpd_of_add_device - Add a device to an I/O PM domain.
+ * @genpd_node: Device tree node pointer representing a PM domain to which the
+ * the device is added to.
+ * @dev: Device to be added.
+ * @td: Set of PM QoS timing parameters to attach to the device.
+ */
+int __pm_genpd_of_add_device(struct device_node *genpd_node, struct device *dev,
+ struct gpd_timing_data *td)
+{
+ struct generic_pm_domain *genpd = NULL, *gpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd_node) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ mutex_lock(&gpd_list_lock);
+ list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
+ if (gpd->of_node == genpd_node) {
+ genpd = gpd;
+ break;
+ }
+ }
+ mutex_unlock(&gpd_list_lock);
+
+ if (!genpd)
+ return -EINVAL;
+
+ return __pm_genpd_add_device(genpd, dev, td);
+}
+
+/**
* pm_genpd_remove_device - Remove a device from an I/O PM domain.
* @genpd: PM domain to remove the device from.
* @dev: Device to be removed.
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 6460577..cfaa98a 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -311,51 +311,51 @@
/* Change Divider - DMC0 */
tmp = data->dmc_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_DMC0);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
} while (tmp & 0x11111111);
/* Change Divider - TOP */
tmp = data->top_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_TOP);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
} while (tmp & 0x11111);
/* Change Divider - LEFTBUS */
- tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4210_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
} while (tmp & 0x11);
/* Change Divider - RIGHTBUS */
- tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4210_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
} while (tmp & 0x11);
return 0;
@@ -376,137 +376,137 @@
/* Change Divider - DMC0 */
tmp = data->dmc_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_DMC0);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
} while (tmp & 0x11111111);
/* Change Divider - DMC1 */
- tmp = __raw_readl(S5P_CLKDIV_DMC1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
- tmp &= ~(S5P_CLKDIV_DMC1_G2D_ACP_MASK |
- S5P_CLKDIV_DMC1_C2C_MASK |
- S5P_CLKDIV_DMC1_C2CACLK_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2C_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
- S5P_CLKDIV_DMC1_G2D_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
(exynos4x12_clkdiv_dmc1[index][1] <<
- S5P_CLKDIV_DMC1_C2C_SHIFT) |
+ EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
(exynos4x12_clkdiv_dmc1[index][2] <<
- S5P_CLKDIV_DMC1_C2CACLK_SHIFT));
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_DMC1);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
} while (tmp & 0x111111);
/* Change Divider - TOP */
- tmp = __raw_readl(S5P_CLKDIV_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
- tmp &= ~(S5P_CLKDIV_TOP_ACLK266_GPS_MASK |
- S5P_CLKDIV_TOP_ACLK100_MASK |
- S5P_CLKDIV_TOP_ACLK160_MASK |
- S5P_CLKDIV_TOP_ACLK133_MASK |
- S5P_CLKDIV_TOP_ONENAND_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
tmp |= ((exynos4x12_clkdiv_top[index][0] <<
- S5P_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
(exynos4x12_clkdiv_top[index][1] <<
- S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
(exynos4x12_clkdiv_top[index][2] <<
- S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
(exynos4x12_clkdiv_top[index][3] <<
- S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
(exynos4x12_clkdiv_top[index][4] <<
- S5P_CLKDIV_TOP_ONENAND_SHIFT));
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_TOP);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
} while (tmp & 0x11111);
/* Change Divider - LEFTBUS */
- tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4x12_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
} while (tmp & 0x11);
/* Change Divider - RIGHTBUS */
- tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4x12_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
} while (tmp & 0x11);
/* Change Divider - MFC */
- tmp = __raw_readl(S5P_CLKDIV_MFC);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
- tmp &= ~(S5P_CLKDIV_MFC_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
- S5P_CLKDIV_MFC_SHIFT));
+ EXYNOS4_CLKDIV_MFC_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_MFC);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_MFC);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
} while (tmp & 0x1);
/* Change Divider - JPEG */
- tmp = __raw_readl(S5P_CLKDIV_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
- tmp &= ~(S5P_CLKDIV_CAM1_JPEG_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
- S5P_CLKDIV_CAM1_JPEG_SHIFT));
+ EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_CAM1);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
} while (tmp & 0x1);
/* Change Divider - FIMC0~3 */
- tmp = __raw_readl(S5P_CLKDIV_CAM);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
- tmp &= ~(S5P_CLKDIV_CAM_FIMC0_MASK | S5P_CLKDIV_CAM_FIMC1_MASK |
- S5P_CLKDIV_CAM_FIMC2_MASK | S5P_CLKDIV_CAM_FIMC3_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
+ EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC0_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC1_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC2_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC3_SHIFT));
+ EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_CAM);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
} while (tmp & 0x1111);
return 0;
@@ -760,55 +760,55 @@
int mgrp;
int i, err = 0;
- tmp = __raw_readl(S5P_CLKDIV_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
- S5P_CLKDIV_DMC0_ACPPCLK_MASK |
- S5P_CLKDIV_DMC0_DPHY_MASK |
- S5P_CLKDIV_DMC0_DMC_MASK |
- S5P_CLKDIV_DMC0_DMCD_MASK |
- S5P_CLKDIV_DMC0_DMCP_MASK |
- S5P_CLKDIV_DMC0_COPY2_MASK |
- S5P_CLKDIV_DMC0_CORETI_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
+ EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
+ EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
- S5P_CLKDIV_DMC0_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
(exynos4210_clkdiv_dmc0[i][1] <<
- S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
(exynos4210_clkdiv_dmc0[i][2] <<
- S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
(exynos4210_clkdiv_dmc0[i][3] <<
- S5P_CLKDIV_DMC0_DMC_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
(exynos4210_clkdiv_dmc0[i][4] <<
- S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
(exynos4210_clkdiv_dmc0[i][5] <<
- S5P_CLKDIV_DMC0_DMCP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
(exynos4210_clkdiv_dmc0[i][6] <<
- S5P_CLKDIV_DMC0_COPY2_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
(exynos4210_clkdiv_dmc0[i][7] <<
- S5P_CLKDIV_DMC0_CORETI_SHIFT));
+ EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
data->dmc_divtable[i] = tmp;
}
- tmp = __raw_readl(S5P_CLKDIV_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK |
- S5P_CLKDIV_TOP_ACLK100_MASK |
- S5P_CLKDIV_TOP_ACLK160_MASK |
- S5P_CLKDIV_TOP_ACLK133_MASK |
- S5P_CLKDIV_TOP_ONENAND_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
tmp |= ((exynos4210_clkdiv_top[i][0] <<
- S5P_CLKDIV_TOP_ACLK200_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
(exynos4210_clkdiv_top[i][1] <<
- S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
(exynos4210_clkdiv_top[i][2] <<
- S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
(exynos4210_clkdiv_top[i][3] <<
- S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
(exynos4210_clkdiv_top[i][4] <<
- S5P_CLKDIV_TOP_ONENAND_SHIFT));
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
data->top_divtable[i] = tmp;
}
@@ -868,32 +868,32 @@
int ret;
/* Enable pause function for DREX2 DVFS */
- tmp = __raw_readl(S5P_DMC_PAUSE_CTRL);
- tmp |= DMC_PAUSE_ENABLE;
- __raw_writel(tmp, S5P_DMC_PAUSE_CTRL);
+ tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
+ tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
+ __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
- tmp = __raw_readl(S5P_CLKDIV_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
for (i = 0; i < EX4x12_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
- S5P_CLKDIV_DMC0_ACPPCLK_MASK |
- S5P_CLKDIV_DMC0_DPHY_MASK |
- S5P_CLKDIV_DMC0_DMC_MASK |
- S5P_CLKDIV_DMC0_DMCD_MASK |
- S5P_CLKDIV_DMC0_DMCP_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
- S5P_CLKDIV_DMC0_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][1] <<
- S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][2] <<
- S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][3] <<
- S5P_CLKDIV_DMC0_DMC_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][4] <<
- S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][5] <<
- S5P_CLKDIV_DMC0_DMCP_SHIFT));
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
data->dmc_divtable[i] = tmp;
}
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 5cd04b6..e6568c1 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -37,7 +37,7 @@
* open drain mode safely
*/
u32 data;
- struct irq_host *irq;
+ struct irq_domain *irq;
void *of_dev_id_data;
};
@@ -281,7 +281,7 @@
.irq_set_type = mpc8xxx_irq_set_type,
};
-static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
+static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
@@ -296,24 +296,9 @@
return 0;
}
-static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq,
- unsigned int *out_flags)
-
-{
- /* interrupt sense values coming from the device tree equal either
- * EDGE_FALLING or EDGE_BOTH
- */
- *out_hwirq = intspec[0];
- *out_flags = intspec[1];
-
- return 0;
-}
-
-static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
+static struct irq_domain_ops mpc8xxx_gpio_irq_ops = {
.map = mpc8xxx_gpio_irq_map,
- .xlate = mpc8xxx_gpio_irq_xlate,
+ .xlate = irq_domain_xlate_twocell,
};
static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
@@ -364,9 +349,8 @@
if (hwirq == NO_IRQ)
goto skip_irq;
- mpc8xxx_gc->irq =
- irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
- &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
+ mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
+ &mpc8xxx_gpio_irq_ops, mpc8xxx_gc);
if (!mpc8xxx_gc->irq)
goto skip_irq;
@@ -374,8 +358,6 @@
if (id)
mpc8xxx_gc->of_dev_id_data = id->data;
- mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
-
/* ack and mask all irqs */
out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
out_be32(mm_gc->regs + GPIO_IMR, 0);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 0a79a11..4627787 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -169,7 +169,7 @@
return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
}
-static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+static int exynos_gpio_setpull(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
{
if (pull == S3C_GPIO_PULL_UP)
@@ -178,7 +178,7 @@
return samsung_gpio_setpull_updown(chip, off, pull);
}
-static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+static samsung_gpio_pull_t exynos_gpio_getpull(struct samsung_gpio_chip *chip,
unsigned int off)
{
samsung_gpio_pull_t pull;
@@ -452,9 +452,9 @@
};
#endif
-static struct samsung_gpio_cfg exynos4_gpio_cfg = {
- .set_pull = exynos4_gpio_setpull,
- .get_pull = exynos4_gpio_getpull,
+static struct samsung_gpio_cfg exynos_gpio_cfg = {
+ .set_pull = exynos_gpio_setpull,
+ .get_pull = exynos_gpio_getpull,
.set_config = samsung_gpio_setcfg_4bit,
.get_config = samsung_gpio_getcfg_4bit,
};
@@ -502,13 +502,13 @@
.get_config = samsung_gpio_getcfg_2bit,
},
[8] = {
- .set_pull = exynos4_gpio_setpull,
- .get_pull = exynos4_gpio_getpull,
+ .set_pull = exynos_gpio_setpull,
+ .get_pull = exynos_gpio_getpull,
},
[9] = {
.cfg_eint = 0x3,
- .set_pull = exynos4_gpio_setpull,
- .get_pull = exynos4_gpio_getpull,
+ .set_pull = exynos_gpio_setpull,
+ .get_pull = exynos_gpio_getpull,
}
};
@@ -2113,10 +2113,10 @@
};
/*
- * Followings are the gpio banks in EXYNOS4210
+ * Followings are the gpio banks in EXYNOS SoCs
*
* The 'config' member when left to NULL, is initialized to the default
- * structure samsung_gpio_cfgs[3] in the init function below.
+ * structure exynos_gpio_cfg in the init function below.
*
* The 'base' member is also initialized in the init function below.
* Note: The initialization of 'base' member of samsung_gpio_chip structure
@@ -2331,7 +2331,6 @@
.label = "GPY6",
},
}, {
- .base = (S5P_VA_GPIO2 + 0xC00),
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(0),
.chip = {
@@ -2341,7 +2340,6 @@
.to_irq = samsung_gpiolib_to_irq,
},
}, {
- .base = (S5P_VA_GPIO2 + 0xC20),
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(8),
.chip = {
@@ -2351,7 +2349,6 @@
.to_irq = samsung_gpiolib_to_irq,
},
}, {
- .base = (S5P_VA_GPIO2 + 0xC40),
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(16),
.chip = {
@@ -2361,7 +2358,6 @@
.to_irq = samsung_gpiolib_to_irq,
},
}, {
- .base = (S5P_VA_GPIO2 + 0xC60),
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(24),
.chip = {
@@ -2386,8 +2382,280 @@
#endif
};
-#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
-static int exynos4_gpio_xlate(struct gpio_chip *gc,
+static struct samsung_gpio_chip exynos5_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+ {
+ .chip = {
+ .base = EXYNOS5_GPA0(0),
+ .ngpio = EXYNOS5_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPA1(0),
+ .ngpio = EXYNOS5_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPA2(0),
+ .ngpio = EXYNOS5_GPIO_A2_NR,
+ .label = "GPA2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPB0(0),
+ .ngpio = EXYNOS5_GPIO_B0_NR,
+ .label = "GPB0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPB1(0),
+ .ngpio = EXYNOS5_GPIO_B1_NR,
+ .label = "GPB1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPB2(0),
+ .ngpio = EXYNOS5_GPIO_B2_NR,
+ .label = "GPB2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPB3(0),
+ .ngpio = EXYNOS5_GPIO_B3_NR,
+ .label = "GPB3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPC0(0),
+ .ngpio = EXYNOS5_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPC1(0),
+ .ngpio = EXYNOS5_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPC2(0),
+ .ngpio = EXYNOS5_GPIO_C2_NR,
+ .label = "GPC2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPC3(0),
+ .ngpio = EXYNOS5_GPIO_C3_NR,
+ .label = "GPC3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPD0(0),
+ .ngpio = EXYNOS5_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPD1(0),
+ .ngpio = EXYNOS5_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY0(0),
+ .ngpio = EXYNOS5_GPIO_Y0_NR,
+ .label = "GPY0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY1(0),
+ .ngpio = EXYNOS5_GPIO_Y1_NR,
+ .label = "GPY1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY2(0),
+ .ngpio = EXYNOS5_GPIO_Y2_NR,
+ .label = "GPY2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY3(0),
+ .ngpio = EXYNOS5_GPIO_Y3_NR,
+ .label = "GPY3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY4(0),
+ .ngpio = EXYNOS5_GPIO_Y4_NR,
+ .label = "GPY4",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY5(0),
+ .ngpio = EXYNOS5_GPIO_Y5_NR,
+ .label = "GPY5",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPY6(0),
+ .ngpio = EXYNOS5_GPIO_Y6_NR,
+ .label = "GPY6",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = EXYNOS5_GPX0(0),
+ .ngpio = EXYNOS5_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = EXYNOS5_GPX1(0),
+ .ngpio = EXYNOS5_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = EXYNOS5_GPX2(0),
+ .ngpio = EXYNOS5_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = EXYNOS5_GPX3(0),
+ .ngpio = EXYNOS5_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+ {
+ .chip = {
+ .base = EXYNOS5_GPE0(0),
+ .ngpio = EXYNOS5_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPE1(0),
+ .ngpio = EXYNOS5_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPF0(0),
+ .ngpio = EXYNOS5_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPF1(0),
+ .ngpio = EXYNOS5_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPG0(0),
+ .ngpio = EXYNOS5_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPG1(0),
+ .ngpio = EXYNOS5_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPG2(0),
+ .ngpio = EXYNOS5_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPH0(0),
+ .ngpio = EXYNOS5_GPIO_H0_NR,
+ .label = "GPH0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPH1(0),
+ .ngpio = EXYNOS5_GPIO_H1_NR,
+ .label = "GPH1",
+
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+ {
+ .chip = {
+ .base = EXYNOS5_GPV0(0),
+ .ngpio = EXYNOS5_GPIO_V0_NR,
+ .label = "GPV0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPV1(0),
+ .ngpio = EXYNOS5_GPIO_V1_NR,
+ .label = "GPV1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPV2(0),
+ .ngpio = EXYNOS5_GPIO_V2_NR,
+ .label = "GPV2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPV3(0),
+ .ngpio = EXYNOS5_GPIO_V3_NR,
+ .label = "GPV3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS5_GPV4(0),
+ .ngpio = EXYNOS5_GPIO_V4_NR,
+ .label = "GPV4",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_4[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+ {
+ .chip = {
+ .base = EXYNOS5_GPZ(0),
+ .ngpio = EXYNOS5_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+#endif
+};
+
+
+#if defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF)
+static int exynos_gpio_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec, u32 *flags)
{
unsigned int pin;
@@ -2413,13 +2681,13 @@
return gpiospec->args[0];
}
-static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+static const struct of_device_id exynos_gpio_dt_match[] __initdata = {
{ .compatible = "samsung,exynos4-gpio", },
{}
};
-static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
- u64 base, u64 offset)
+static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
{
struct gpio_chip *gc = &chip->chip;
u64 address;
@@ -2429,28 +2697,29 @@
address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
gc->of_node = of_find_matching_node_by_address(NULL,
- exynos4_gpio_dt_match, address);
+ exynos_gpio_dt_match, address);
if (!gc->of_node) {
pr_info("gpio: device tree node not found for gpio controller"
" with base address %08llx\n", address);
return;
}
gc->of_gpio_n_cells = 4;
- gc->of_xlate = exynos4_gpio_xlate;
+ gc->of_xlate = exynos_gpio_xlate;
}
-#elif defined(CONFIG_ARCH_EXYNOS4)
-static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
- u64 base, u64 offset)
+#elif defined(CONFIG_ARCH_EXYNOS)
+static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
{
return;
}
-#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+#endif /* defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) */
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
struct samsung_gpio_chip *chip;
int i, nr_chips;
+ void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4;
int group = 0;
samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
@@ -2516,66 +2785,200 @@
s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
#endif
} else if (soc_is_exynos4210()) {
- group = 0;
+#ifdef CONFIG_CPU_EXYNOS4210
+ void __iomem *gpx_base;
/* gpio part1 */
+ gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
+ if (gpio_base1 == NULL) {
+ pr_err("unable to ioremap for gpio_base1\n");
+ goto err_ioremap1;
+ }
+
chip = exynos4_gpios_1;
nr_chips = ARRAY_SIZE(exynos4_gpios_1);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
- chip->config = &exynos4_gpio_cfg;
+ chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
-#ifdef CONFIG_CPU_EXYNOS4210
- exynos4_gpiolib_attach_ofnode(chip,
+ exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO1, i * 0x20);
-#endif
}
- samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_1,
+ nr_chips, gpio_base1);
/* gpio part2 */
+ gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+ if (gpio_base2 == NULL) {
+ pr_err("unable to ioremap for gpio_base2\n");
+ goto err_ioremap2;
+ }
+
+ /* need to set base address for gpx */
+ chip = &exynos4_gpios_2[16];
+ gpx_base = gpio_base2 + 0xC00;
+ for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
+ chip->base = gpx_base;
+
chip = exynos4_gpios_2;
nr_chips = ARRAY_SIZE(exynos4_gpios_2);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
- chip->config = &exynos4_gpio_cfg;
+ chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
-#ifdef CONFIG_CPU_EXYNOS4210
- exynos4_gpiolib_attach_ofnode(chip,
+ exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO2, i * 0x20);
-#endif
}
- samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_2,
+ nr_chips, gpio_base2);
/* gpio part3 */
+ gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256);
+ if (gpio_base3 == NULL) {
+ pr_err("unable to ioremap for gpio_base3\n");
+ goto err_ioremap3;
+ }
+
chip = exynos4_gpios_3;
nr_chips = ARRAY_SIZE(exynos4_gpios_3);
for (i = 0; i < nr_chips; i++, chip++) {
if (!chip->config) {
- chip->config = &exynos4_gpio_cfg;
+ chip->config = &exynos_gpio_cfg;
chip->group = group++;
}
-#ifdef CONFIG_CPU_EXYNOS4210
- exynos4_gpiolib_attach_ofnode(chip,
+ exynos_gpiolib_attach_ofnode(chip,
EXYNOS4_PA_GPIO3, i * 0x20);
-#endif
}
- samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_3,
+ nr_chips, gpio_base3);
#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
#endif
+
+#endif /* CONFIG_CPU_EXYNOS4210 */
+ } else if (soc_is_exynos5250()) {
+#ifdef CONFIG_SOC_EXYNOS5250
+ void __iomem *gpx_base;
+
+ /* gpio part1 */
+ gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+ if (gpio_base1 == NULL) {
+ pr_err("unable to ioremap for gpio_base1\n");
+ goto err_ioremap1;
+ }
+
+ /* need to set base address for gpx */
+ chip = &exynos5_gpios_1[20];
+ gpx_base = gpio_base1 + 0xC00;
+ for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
+ chip->base = gpx_base;
+
+ chip = exynos5_gpios_1;
+ nr_chips = ARRAY_SIZE(exynos5_gpios_1);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos_gpio_cfg;
+ chip->group = group++;
+ }
+ exynos_gpiolib_attach_ofnode(chip,
+ EXYNOS5_PA_GPIO1, i * 0x20);
+ }
+ samsung_gpiolib_add_4bit_chips(exynos5_gpios_1,
+ nr_chips, gpio_base1);
+
+ /* gpio part2 */
+ gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K);
+ if (gpio_base2 == NULL) {
+ pr_err("unable to ioremap for gpio_base2\n");
+ goto err_ioremap2;
+ }
+
+ chip = exynos5_gpios_2;
+ nr_chips = ARRAY_SIZE(exynos5_gpios_2);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos_gpio_cfg;
+ chip->group = group++;
+ }
+ exynos_gpiolib_attach_ofnode(chip,
+ EXYNOS5_PA_GPIO2, i * 0x20);
+ }
+ samsung_gpiolib_add_4bit_chips(exynos5_gpios_2,
+ nr_chips, gpio_base2);
+
+ /* gpio part3 */
+ gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K);
+ if (gpio_base3 == NULL) {
+ pr_err("unable to ioremap for gpio_base3\n");
+ goto err_ioremap3;
+ }
+
+ /* need to set base address for gpv */
+ exynos5_gpios_3[0].base = gpio_base3;
+ exynos5_gpios_3[1].base = gpio_base3 + 0x20;
+ exynos5_gpios_3[2].base = gpio_base3 + 0x60;
+ exynos5_gpios_3[3].base = gpio_base3 + 0x80;
+ exynos5_gpios_3[4].base = gpio_base3 + 0xC0;
+
+ chip = exynos5_gpios_3;
+ nr_chips = ARRAY_SIZE(exynos5_gpios_3);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos_gpio_cfg;
+ chip->group = group++;
+ }
+ exynos_gpiolib_attach_ofnode(chip,
+ EXYNOS5_PA_GPIO3, i * 0x20);
+ }
+ samsung_gpiolib_add_4bit_chips(exynos5_gpios_3,
+ nr_chips, gpio_base3);
+
+ /* gpio part4 */
+ gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K);
+ if (gpio_base4 == NULL) {
+ pr_err("unable to ioremap for gpio_base4\n");
+ goto err_ioremap4;
+ }
+
+ chip = exynos5_gpios_4;
+ nr_chips = ARRAY_SIZE(exynos5_gpios_4);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos_gpio_cfg;
+ chip->group = group++;
+ }
+ exynos_gpiolib_attach_ofnode(chip,
+ EXYNOS5_PA_GPIO4, i * 0x20);
+ }
+ samsung_gpiolib_add_4bit_chips(exynos5_gpios_4,
+ nr_chips, gpio_base4);
+#endif /* CONFIG_SOC_EXYNOS5250 */
} else {
WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
return -ENODEV;
}
return 0;
+
+err_ioremap4:
+ iounmap(gpio_base3);
+err_ioremap3:
+ iounmap(gpio_base2);
+err_ioremap2:
+ iounmap(gpio_base1);
+err_ioremap1:
+ return -ENOMEM;
}
core_initcall(samsung_gpiolib_init);
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index bdc2937..6f17671 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -25,6 +25,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/irqdomain.h>
#include <asm/mach/irq.h>
@@ -74,9 +75,10 @@
#endif
};
-
+static struct irq_domain *irq_domain;
static void __iomem *regs;
-static struct tegra_gpio_bank tegra_gpio_banks[7];
+static u32 tegra_gpio_bank_count;
+static struct tegra_gpio_bank *tegra_gpio_banks;
static inline void tegra_gpio_writel(u32 val, u32 reg)
{
@@ -139,7 +141,7 @@
static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return TEGRA_GPIO_TO_IRQ(offset);
+ return irq_find_mapping(irq_domain, offset);
}
static struct gpio_chip tegra_gpio_chip = {
@@ -155,28 +157,28 @@
static void tegra_gpio_irq_ack(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
}
static void tegra_gpio_irq_mask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
}
static void tegra_gpio_irq_unmask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
}
static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
int port = GPIO_PORT(gpio);
int lvl_type;
@@ -273,7 +275,7 @@
local_irq_save(flags);
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+ for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -296,7 +298,7 @@
int p;
local_irq_save(flags);
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+ for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -337,13 +339,44 @@
static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
+ int irq_base;
struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
int i;
int j;
- for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ for (;;) {
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count);
+ if (!res)
+ break;
+ tegra_gpio_bank_count++;
+ }
+ if (!tegra_gpio_bank_count) {
+ dev_err(&pdev->dev, "Missing IRQ resource\n");
+ return -ENODEV;
+ }
+
+ tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32;
+
+ tegra_gpio_banks = devm_kzalloc(&pdev->dev,
+ tegra_gpio_bank_count * sizeof(*tegra_gpio_banks),
+ GFP_KERNEL);
+ if (!tegra_gpio_banks) {
+ dev_err(&pdev->dev, "Couldn't allocate bank structure\n");
+ return -ENODEV;
+ }
+
+ irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
+ if (irq_base < 0) {
+ dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
+ return -ENODEV;
+ }
+ irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
+ tegra_gpio_chip.ngpio, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ for (i = 0; i < tegra_gpio_bank_count; i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
if (!res) {
dev_err(&pdev->dev, "Missing IRQ resource\n");
@@ -380,8 +413,8 @@
gpiochip_add(&tegra_gpio_chip);
- for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
- int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
+ int irq = irq_find_mapping(irq_domain, gpio);
/* No validity check; all Tegra GPIOs are valid IRQs */
bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -393,7 +426,7 @@
set_irq_flags(irq, IRQF_VALID);
}
- for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ for (i = 0; i < tegra_gpio_bank_count; i++) {
bank = &tegra_gpio_banks[i];
irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 58832e5..8d1ab6f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -196,7 +196,7 @@
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- clk_enable(i2c_imx->clk);
+ clk_prepare_enable(i2c_imx->clk);
writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
/* Enable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
@@ -245,7 +245,7 @@
/* Disable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- clk_disable(i2c_imx->clk);
+ clk_disable_unprepare(i2c_imx->clk);
}
static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f147395..1489c35 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -201,6 +201,7 @@
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
+ select IRQ_DOMAIN
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 8ce3959..4970d43 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -149,7 +149,7 @@
#define TWL_MODULE_LAST TWL4030_MODULE_LAST
-#define TWL4030_NR_IRQS 8
+#define TWL4030_NR_IRQS 34 /* core:8, power:8, gpio: 18 */
#define TWL6030_NR_IRQS 20
/* Base Address defns for twl4030_map[] */
@@ -263,10 +263,6 @@
static struct twl_client twl_modules[TWL_NUM_SLAVES];
-#ifdef CONFIG_IRQ_DOMAIN
-static struct irq_domain domain;
-#endif
-
/* mapping the module id to slave id and base address */
struct twl_mapping {
unsigned char sid; /* Slave ID */
@@ -1227,14 +1223,8 @@
pdata->irq_base = status;
pdata->irq_end = pdata->irq_base + nr_irqs;
-
-#ifdef CONFIG_IRQ_DOMAIN
- domain.irq_base = pdata->irq_base;
- domain.nr_irq = nr_irqs;
- domain.of_node = of_node_get(node);
- domain.ops = &irq_domain_simple_ops;
- irq_domain_add(&domain);
-#endif
+ irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0,
+ &irq_domain_simple_ops, NULL);
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
@@ -1315,11 +1305,10 @@
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
}
-#ifdef CONFIG_OF_DEVICE
+ status = -ENODEV;
if (node)
status = of_platform_populate(node, NULL, NULL, &client->dev);
- else
-#endif
+ if (status)
status = add_children(pdata, id->driver_data);
fail:
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 947faa5..efdb81d 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -86,7 +86,6 @@
{
return ( cpu_is_at91sam9260()
|| cpu_is_at91sam9263()
- || cpu_is_at91cap9()
|| cpu_is_at91sam9rl()
|| cpu_is_at91sam9g10()
|| cpu_is_at91sam9g20()
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 11e589c..bdfd055 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1326,7 +1326,7 @@
if (ret)
goto unmap;
- if (dev->irq[1] == NO_IRQ)
+ if (dev->irq[1] == NO_IRQ || !dev->irq[1])
host->singleirq = true;
else {
ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 0be4e20..6193a0d 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -464,7 +464,7 @@
err = PTR_ERR(clk);
goto err_clk_get;
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
pltfm_host->clk = clk;
if (!is_imx25_esdhc(imx_data))
@@ -559,7 +559,7 @@
gpio_free(boarddata->wp_gpio);
no_card_detect_pin:
no_board_data:
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
err_clk_get:
kfree(imx_data);
@@ -586,7 +586,7 @@
gpio_free(boarddata->cd_gpio);
}
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
kfree(imx_data);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 1af756e..b19e7d4 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -518,9 +518,6 @@
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->mmc->caps = MMC_CAP_NONREMOVABLE;
- if (pdata->host_caps)
- host->mmc->caps |= pdata->host_caps;
-
if (pdata->pm_caps)
host->mmc->pm_caps |= pdata->pm_caps;
@@ -544,6 +541,9 @@
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
+ if (pdata->host_caps2)
+ host->mmc->caps2 |= pdata->host_caps2;
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(dev, "sdhci_add_host() failed\n");
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 068c356..88bbd8f 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -190,8 +190,10 @@
{seeq8005_probe, 0},
#endif
#ifdef CONFIG_CS89x0
+#ifndef CONFIG_CS89x0_PLATFORM
{cs89x0_probe, 0},
#endif
+#endif
#ifdef CONFIG_AT1700
{at1700_probe, 0},
#endif
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 1f8648f..8388e36 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -5,8 +5,7 @@
config NET_VENDOR_CIRRUS
bool "Cirrus devices"
default y
- depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
- || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
+ depends on ISA || EISA || ARM || MAC
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -21,8 +20,7 @@
config CS89x0
tristate "CS89x0 support"
- depends on (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+ depends on ISA || EISA || ARM
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -33,10 +31,15 @@
To compile this driver as a module, choose M here. The module
will be called cs89x0.
-config CS89x0_NONISA_IRQ
- def_bool y
- depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+config CS89x0_PLATFORM
+ bool "CS89x0 platform driver support"
+ depends on CS89x0
+ help
+ Say Y to compile the cs89x0 driver as a platform driver. This
+ makes this driver suitable for use on certain evaluation boards
+ such as the iMX21ADS.
+
+ If you are unsure, say N.
config EP93XX_ETH
tristate "EP93xx Ethernet support"
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index f328da2..7202ca9 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -100,9 +100,6 @@
*/
-/* Always include 'config.h' first in case the user wants to turn on
- or override something. */
-#include <linux/module.h>
/*
* Set this to zero to disable DMA code
@@ -131,9 +128,12 @@
*/
+#include <linux/module.h>
+#include <linux/printk.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
@@ -151,6 +151,7 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <linux/atomic.h>
#if ALLOW_DMA
#include <asm/dma.h>
#endif
@@ -174,26 +175,20 @@
them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */
#if defined(CONFIG_MACH_IXDP2351)
+#define CS89x0_NONISA_IRQ
static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_IXDP2X01)
+#define CS89x0_NONISA_IRQ
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_MACH_QQ2440)
-#include <mach/qq2440.h>
-static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
-static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
-#elif defined(CONFIG_MACH_MX31ADS)
-#include <mach/board-mx31ads.h>
-static unsigned int netcard_portlist[] __used __initdata = {
- PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
-};
-static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
#else
+#ifndef CONFIG_CS89x0_PLATFORM
static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {10,11,12,5};
#endif
+#endif
#if DEBUGGING
static unsigned int net_debug = DEBUGGING;
@@ -236,11 +231,16 @@
unsigned char *end_dma_buff; /* points to the end of the buffer */
unsigned char *rx_dma_ptr; /* points to the next packet */
#endif
+#ifdef CONFIG_CS89x0_PLATFORM
+ void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */
+ unsigned long phys_addr;/* Physical address for accessing the CS89x0. */
+ unsigned long size; /* Length of CS89x0 memory region. */
+#endif
};
/* Index to functions, as function prototypes. */
-static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
+static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular);
static int net_open(struct net_device *dev);
static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t net_interrupt(int irq, void *dev_id);
@@ -294,6 +294,7 @@
__setup("cs89x0_media=", media_fn);
+#ifndef CONFIG_CS89x0_PLATFORM
/* Check for a network adaptor of this type, and return '0' iff one exists.
If dev->base_addr == 0, probe all likely locations.
If dev->base_addr == 1, always return failure.
@@ -343,6 +344,7 @@
return ERR_PTR(err);
}
#endif
+#endif
#if defined(CONFIG_MACH_IXDP2351)
static u16
@@ -504,7 +506,7 @@
*/
static int __init
-cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
+cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular)
{
struct net_local *lp = netdev_priv(dev);
static unsigned version_printed;
@@ -529,15 +531,12 @@
lp->force = g_cs89x0_media__force;
#endif
-#if defined(CONFIG_MACH_QQ2440)
- lp->force |= FORCE_RJ45 | FORCE_FULL;
-#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */
/* WTF is going on here? */
if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
- printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
+ printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n",
DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
retval = -EBUSY;
goto out1;
@@ -549,7 +548,7 @@
will skip the test for the ADD_PORT. */
if (ioaddr & 1) {
if (net_debug > 1)
- printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
+ printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr);
if ((ioaddr & 2) != 2)
if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
printk(KERN_ERR "%s: bad signature 0x%x\n",
@@ -560,13 +559,13 @@
}
ioaddr &= ~3;
- printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
+ printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n",
ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
writeword(ioaddr, ADD_PORT, PP_ChipID);
tmp = readword(ioaddr, DATA_PORT);
if (tmp != CHIP_EISA_ID_SIG) {
- printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
+ printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!="
CHIP_EISA_ID_SIG_STR "\n",
dev->name, ioaddr, DATA_PORT, tmp);
retval = -ENODEV;
@@ -736,8 +735,9 @@
dev->irq = i;
} else {
i = lp->isa_config & INT_NO_MASK;
+#ifndef CONFIG_CS89x0_PLATFORM
if (lp->chip_type == CS8900) {
-#ifdef CONFIG_CS89x0_NONISA_IRQ
+#ifdef CS89x0_NONISA_IRQ
i = cs8900_irq_map[0];
#else
/* Translate the IRQ using the IRQ mapping table. */
@@ -758,6 +758,7 @@
}
#endif
}
+#endif
if (!dev->irq)
dev->irq = i;
}
@@ -1168,6 +1169,7 @@
int i;
if (chip_type == CS8900) {
+#ifndef CONFIG_CS89x0_PLATFORM
/* Search the mapping table for the corresponding IRQ pin. */
for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
if (cs8900_irq_map[i] == irq)
@@ -1175,6 +1177,10 @@
/* Not found */
if (i == ARRAY_SIZE(cs8900_irq_map))
i = 3;
+#else
+ /* INTRQ0 pin is used for interrupt generation. */
+ i = 0;
+#endif
writereg(dev, PP_CS8900_ISAINT, i);
} else {
writereg(dev, PP_CS8920_ISAINT, irq);
@@ -1228,7 +1234,7 @@
}
else
{
-#ifndef CONFIG_CS89x0_NONISA_IRQ
+#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
@@ -1746,7 +1752,7 @@
return 0;
}
-#ifdef MODULE
+#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
static struct net_device *dev_cs89x0;
@@ -1900,7 +1906,97 @@
release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
free_netdev(dev_cs89x0);
}
-#endif /* MODULE */
+#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */
+
+#ifdef CONFIG_CS89x0_PLATFORM
+static int __init cs89x0_platform_probe(struct platform_device *pdev)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ struct net_local *lp;
+ struct resource *mem_res;
+ int err;
+
+ if (!dev)
+ return -ENOMEM;
+
+ lp = netdev_priv(dev);
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dev->irq = platform_get_irq(pdev, 0);
+ if (mem_res == NULL || dev->irq <= 0) {
+ dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+ err = -ENXIO;
+ goto free;
+ }
+
+ lp->phys_addr = mem_res->start;
+ lp->size = resource_size(mem_res);
+ if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) {
+ dev_warn(&dev->dev, "request_mem_region() failed.\n");
+ err = -EBUSY;
+ goto free;
+ }
+
+ lp->virt_addr = ioremap(lp->phys_addr, lp->size);
+ if (!lp->virt_addr) {
+ dev_warn(&dev->dev, "ioremap() failed.\n");
+ err = -ENOMEM;
+ goto release;
+ }
+
+ err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0);
+ if (err) {
+ dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+ goto unmap;
+ }
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
+
+unmap:
+ iounmap(lp->virt_addr);
+release:
+ release_mem_region(lp->phys_addr, lp->size);
+free:
+ free_netdev(dev);
+ return err;
+}
+
+static int cs89x0_platform_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct net_local *lp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ iounmap(lp->virt_addr);
+ release_mem_region(lp->phys_addr, lp->size);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver cs89x0_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = cs89x0_platform_remove,
+};
+
+static int __init cs89x0_init(void)
+{
+ return platform_driver_probe(&cs89x0_driver, cs89x0_platform_probe);
+}
+
+module_init(cs89x0_init);
+
+static void __exit cs89x0_cleanup(void)
+{
+ platform_driver_unregister(&cs89x0_driver);
+}
+
+module_exit(cs89x0_cleanup);
+
+#endif /* CONFIG_CS89x0_PLATFORM */
/*
* Local variables:
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 50e8e5e..7189adf 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -255,13 +255,13 @@
return platform_driver_register(&mdio_ofgpio_driver);
}
-static inline void __exit mdio_ofgpio_exit(void)
+static inline void mdio_ofgpio_exit(void)
{
platform_driver_unregister(&mdio_ofgpio_driver);
}
#else
static inline int __init mdio_ofgpio_init(void) { return 0; }
-static inline void __exit mdio_ofgpio_exit(void) { }
+static inline void mdio_ofgpio_exit(void) { }
#endif /* CONFIG_OF_GPIO */
static struct platform_driver mdio_gpio_driver = {
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 63b3ec4..343ad29 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -55,7 +55,7 @@
#include <asm/dcr.h>
#endif
-#if !defined(CONFIG_SPARC)
+#ifdef CONFIG_OF_ADDRESS
/*
* The following routines scan a subtree and registers a device for
* each applicable node.
@@ -253,7 +253,7 @@
if (!of_device_is_available(node))
return NULL;
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
return NULL;
@@ -283,14 +283,14 @@
if (ret)
goto err_free;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret)
goto err_free;
return dev;
err_free:
- kfree(dev);
+ amba_device_put(dev);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
@@ -462,4 +462,4 @@
of_node_put(root);
return rc;
}
-#endif /* !CONFIG_SPARC */
+#endif /* CONFIG_OF_ADDRESS */
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7a61b17..740f468 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -74,14 +74,6 @@
and the platform has to provide a mapping of GPIO-states
to target volts/amps.
-config REGULATOR_BQ24022
- tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
- help
- This driver controls a TI bq24022 Charger attached via
- GPIOs. The provided current regulator can enable/disable
- charging select between 100 mA and 500 mA charging current
- limit.
-
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 503bac8..f53cf80 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,7 +11,6 @@
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
-obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
deleted file mode 100644
index 9fab6d1..0000000
--- a/drivers/regulator/bq24022.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
- * 1-Cell Li-Ion Charger connected via GPIOs.
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/regulator/bq24022.h>
-#include <linux/regulator/driver.h>
-
-
-static int bq24022_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
- dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n",
- max_uA >= 500000 ? "500" : "100");
-
- /* REVISIT: maybe return error if min_uA != 0 ? */
- gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
- return 0;
-}
-
-static int bq24022_get_current_limit(struct regulator_dev *rdev)
-{
- struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
- return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
-}
-
-static int bq24022_enable(struct regulator_dev *rdev)
-{
- struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
- dev_dbg(rdev_get_dev(rdev), "enabling charger\n");
-
- gpio_set_value(pdata->gpio_nce, 0);
- return 0;
-}
-
-static int bq24022_disable(struct regulator_dev *rdev)
-{
- struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
- dev_dbg(rdev_get_dev(rdev), "disabling charger\n");
-
- gpio_set_value(pdata->gpio_nce, 1);
- return 0;
-}
-
-static int bq24022_is_enabled(struct regulator_dev *rdev)
-{
- struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
-
- return !gpio_get_value(pdata->gpio_nce);
-}
-
-static struct regulator_ops bq24022_ops = {
- .set_current_limit = bq24022_set_current_limit,
- .get_current_limit = bq24022_get_current_limit,
- .enable = bq24022_enable,
- .disable = bq24022_disable,
- .is_enabled = bq24022_is_enabled,
-};
-
-static struct regulator_desc bq24022_desc = {
- .name = "bq24022",
- .ops = &bq24022_ops,
- .type = REGULATOR_CURRENT,
- .owner = THIS_MODULE,
-};
-
-static int __init bq24022_probe(struct platform_device *pdev)
-{
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
- struct regulator_dev *bq24022;
- int ret;
-
- if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
- return -EINVAL;
-
- ret = gpio_request(pdata->gpio_nce, "ncharge_en");
- if (ret) {
- dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
- pdata->gpio_nce);
- goto err_ce;
- }
- ret = gpio_request(pdata->gpio_iset2, "charge_mode");
- if (ret) {
- dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
- pdata->gpio_iset2);
- goto err_iset2;
- }
- ret = gpio_direction_output(pdata->gpio_iset2, 0);
- ret = gpio_direction_output(pdata->gpio_nce, 1);
-
- bq24022 = regulator_register(&bq24022_desc, &pdev->dev,
- pdata->init_data, pdata, NULL);
- if (IS_ERR(bq24022)) {
- dev_dbg(&pdev->dev, "couldn't register regulator\n");
- ret = PTR_ERR(bq24022);
- goto err_reg;
- }
- platform_set_drvdata(pdev, bq24022);
- dev_dbg(&pdev->dev, "registered regulator\n");
-
- return 0;
-err_reg:
- gpio_free(pdata->gpio_iset2);
-err_iset2:
- gpio_free(pdata->gpio_nce);
-err_ce:
- return ret;
-}
-
-static int __devexit bq24022_remove(struct platform_device *pdev)
-{
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
- struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
-
- regulator_unregister(bq24022);
- gpio_free(pdata->gpio_iset2);
- gpio_free(pdata->gpio_nce);
-
- return 0;
-}
-
-static struct platform_driver bq24022_driver = {
- .driver = {
- .name = "bq24022",
- },
- .remove = __devexit_p(bq24022_remove),
-};
-
-static int __init bq24022_init(void)
-{
- return platform_driver_probe(&bq24022_driver, bq24022_probe);
-}
-
-static void __exit bq24022_exit(void)
-{
- platform_driver_unregister(&bq24022_driver);
-}
-
-module_init(bq24022_init);
-module_exit(bq24022_exit);
-
-MODULE_AUTHOR("Philipp Zabel");
-MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3a125b8..59efc63 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -773,8 +773,8 @@
will be called rtc-ep93xx.
config RTC_DRV_SA1100
- tristate "SA11x0/PXA2xx"
- depends on ARCH_SA1100 || ARCH_PXA
+ tristate "SA11x0/PXA2xx/PXA910"
+ depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
help
If you say Y here you will get access to the real time clock
built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index aef40bd..7895186 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -35,6 +35,8 @@
enum s3c_cpu_type {
TYPE_S3C2410,
+ TYPE_S3C2416,
+ TYPE_S3C2443,
TYPE_S3C64XX,
};
@@ -132,6 +134,7 @@
struct platform_device *pdev = to_platform_device(dev);
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
unsigned int tmp = 0;
+ int val;
if (!is_power_of_2(freq))
return -EINVAL;
@@ -139,12 +142,22 @@
clk_enable(rtc_clk);
spin_lock_irq(&s3c_rtc_pie_lock);
- if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+ if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
tmp = readb(s3c_rtc_base + S3C2410_TICNT);
tmp &= S3C2410_TICNT_ENABLE;
}
- tmp |= (rtc_dev->max_user_freq / freq)-1;
+ val = (rtc_dev->max_user_freq / freq) - 1;
+
+ if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+ tmp |= S3C2443_TICNT_PART(val);
+ writel(S3C2443_TICNT1_PART(val), s3c_rtc_base + S3C2443_TICNT1);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C2416)
+ writel(S3C2416_TICNT2_PART(val), s3c_rtc_base + S3C2416_TICNT2);
+ } else {
+ tmp |= val;
+ }
writel(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
@@ -371,7 +384,7 @@
tmp &= ~S3C2410_RTCCON_RTCEN;
writew(tmp, base + S3C2410_RTCCON);
- if (s3c_rtc_cpu_type == TYPE_S3C2410) {
+ if (s3c_rtc_cpu_type != TYPE_S3C64XX) {
tmp = readb(base + S3C2410_TICNT);
tmp &= ~S3C2410_TICNT_ENABLE;
writeb(tmp, base + S3C2410_TICNT);
@@ -428,12 +441,27 @@
return 0;
}
+static const struct of_device_id s3c_rtc_dt_match[];
+
+static inline int s3c_rtc_get_driver_data(struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
+ return match->data;
+ }
+#endif
+ return platform_get_device_id(pdev)->driver_data;
+}
+
static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct rtc_time rtc_tm;
struct resource *res;
int ret;
+ int tmp;
pr_debug("%s: probe=%p\n", __func__, pdev);
@@ -508,13 +536,7 @@
goto err_nortc;
}
-#ifdef CONFIG_OF
- if (pdev->dev.of_node)
- s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
- "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
- else
-#endif
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+ s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);
/* Check RTC Time */
@@ -533,11 +555,17 @@
dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
}
- if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ if (s3c_rtc_cpu_type != TYPE_S3C2410)
rtc->max_user_freq = 32768;
else
rtc->max_user_freq = 128;
+ if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
+ tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
+ tmp |= S3C2443_RTCCON_TICSEL;
+ writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
+ }
+
platform_set_drvdata(pdev, rtc);
s3c_rtc_setfreq(&pdev->dev, 1);
@@ -638,8 +666,19 @@
#ifdef CONFIG_OF
static const struct of_device_id s3c_rtc_dt_match[] = {
- { .compatible = "samsung,s3c2410-rtc" },
- { .compatible = "samsung,s3c6410-rtc" },
+ {
+ .compatible = "samsung,s3c2410-rtc"
+ .data = TYPE_S3C2410,
+ }, {
+ .compatible = "samsung,s3c2416-rtc"
+ .data = TYPE_S3C2416,
+ }, {
+ .compatible = "samsung,s3c2443-rtc"
+ .data = TYPE_S3C2443,
+ }, {
+ .compatible = "samsung,s3c6410-rtc"
+ .data = TYPE_S3C64XX,
+ },
{},
};
MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
@@ -652,6 +691,12 @@
.name = "s3c2410-rtc",
.driver_data = TYPE_S3C2410,
}, {
+ .name = "s3c2416-rtc",
+ .driver_data = TYPE_S3C2416,
+ }, {
+ .name = "s3c2443-rtc",
+ .driver_data = TYPE_S3C2443,
+ }, {
.name = "s3c64xx-rtc",
.driver_data = TYPE_S3C64XX,
},
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index cb9a585..e443b78 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -23,94 +23,44 @@
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/clk.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <mach/regs-rtc.h>
#endif
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
+#define RTC_FREQ 1024
-static const unsigned long RTC_FREQ = 1024;
-static struct rtc_time rtc_alarm;
-static DEFINE_SPINLOCK(sa1100_rtc_lock);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
- return (tm->tm_year == -1) ||
- ((unsigned)tm->tm_mon >= 12) ||
- ((unsigned)(tm->tm_mday - 1) >= 31) ||
- ((unsigned)tm->tm_hour > 23) ||
- ((unsigned)tm->tm_min > 59) ||
- ((unsigned)tm->tm_sec > 59);
-}
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
- struct rtc_time *alrm)
-{
- unsigned long next_time;
- unsigned long now_time;
-
- next->tm_year = now->tm_year;
- next->tm_mon = now->tm_mon;
- next->tm_mday = now->tm_mday;
- next->tm_hour = alrm->tm_hour;
- next->tm_min = alrm->tm_min;
- next->tm_sec = alrm->tm_sec;
-
- rtc_tm_to_time(now, &now_time);
- rtc_tm_to_time(next, &next_time);
-
- if (next_time < now_time) {
- /* Advance one day */
- next_time += 60 * 60 * 24;
- rtc_time_to_tm(next_time, next);
- }
-}
-
-static int rtc_update_alarm(struct rtc_time *alrm)
-{
- struct rtc_time alarm_tm, now_tm;
- unsigned long now, time;
- int ret;
-
- do {
- now = RCNR;
- rtc_time_to_tm(now, &now_tm);
- rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
- ret = rtc_tm_to_time(&alarm_tm, &time);
- if (ret != 0)
- break;
-
- RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
- RTAR = time;
- } while (now != RCNR);
-
- return ret;
-}
+struct sa1100_rtc {
+ spinlock_t lock;
+ int irq_1hz;
+ int irq_alarm;
+ struct rtc_device *rtc;
+ struct clk *clk;
+};
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
{
- struct platform_device *pdev = to_platform_device(dev_id);
- struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct sa1100_rtc *info = dev_get_drvdata(dev_id);
+ struct rtc_device *rtc = info->rtc;
unsigned int rtsr;
unsigned long events = 0;
- spin_lock(&sa1100_rtc_lock);
+ spin_lock(&info->lock);
rtsr = RTSR;
/* clear interrupt sources */
@@ -146,30 +96,30 @@
rtc_update_irq(rtc, 1, events);
- if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
- rtc_update_alarm(&rtc_alarm);
-
- spin_unlock(&sa1100_rtc_lock);
+ spin_unlock(&info->lock);
return IRQ_HANDLED;
}
static int sa1100_rtc_open(struct device *dev)
{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ struct rtc_device *rtc = info->rtc;
int ret;
- struct platform_device *plat_dev = to_platform_device(dev);
- struct rtc_device *rtc = platform_get_drvdata(plat_dev);
- ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto fail_clk;
+ ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc 1Hz", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
+ dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
goto fail_ui;
}
- ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
+ ret = request_irq(info->irq_alarm, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc Alrm", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
+ dev_err(dev, "IRQ %d already in use.\n", info->irq_alarm);
goto fail_ai;
}
rtc->max_user_freq = RTC_FREQ;
@@ -178,29 +128,36 @@
return 0;
fail_ai:
- free_irq(IRQ_RTC1Hz, dev);
+ free_irq(info->irq_1hz, dev);
fail_ui:
+ clk_disable_unprepare(info->clk);
+ fail_clk:
return ret;
}
static void sa1100_rtc_release(struct device *dev)
{
- spin_lock_irq(&sa1100_rtc_lock);
- RTSR = 0;
- spin_unlock_irq(&sa1100_rtc_lock);
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
- free_irq(IRQ_RTCAlrm, dev);
- free_irq(IRQ_RTC1Hz, dev);
+ spin_lock_irq(&info->lock);
+ RTSR = 0;
+ spin_unlock_irq(&info->lock);
+
+ free_irq(info->irq_alarm, dev);
+ free_irq(info->irq_1hz, dev);
+ clk_disable_unprepare(info->clk);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- spin_lock_irq(&sa1100_rtc_lock);
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+ spin_lock_irq(&info->lock);
if (enabled)
RTSR |= RTSR_ALE;
else
RTSR &= ~RTSR_ALE;
- spin_unlock_irq(&sa1100_rtc_lock);
+ spin_unlock_irq(&info->lock);
return 0;
}
@@ -225,7 +182,6 @@
{
u32 rtsr;
- memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
rtsr = RTSR;
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
@@ -234,17 +190,22 @@
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+ unsigned long time;
int ret;
- spin_lock_irq(&sa1100_rtc_lock);
- ret = rtc_update_alarm(&alrm->time);
- if (ret == 0) {
- if (alrm->enabled)
- RTSR |= RTSR_ALE;
- else
- RTSR &= ~RTSR_ALE;
- }
- spin_unlock_irq(&sa1100_rtc_lock);
+ spin_lock_irq(&info->lock);
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret != 0)
+ goto out;
+ RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+ RTAR = time;
+ if (alrm->enabled)
+ RTSR |= RTSR_ALE;
+ else
+ RTSR &= ~RTSR_ALE;
+out:
+ spin_unlock_irq(&info->lock);
return ret;
}
@@ -271,6 +232,27 @@
static int sa1100_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
+ struct sa1100_rtc *info;
+ int irq_1hz, irq_alarm, ret = 0;
+
+ irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+ irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+ if (irq_1hz < 0 || irq_alarm < 0)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(info->clk);
+ goto err_clk;
+ }
+ info->irq_1hz = irq_1hz;
+ info->irq_alarm = irq_alarm;
+ spin_lock_init(&info->lock);
+ platform_set_drvdata(pdev, info);
/*
* According to the manual we should be able to let RTTR be zero
@@ -292,10 +274,11 @@
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- platform_set_drvdata(pdev, rtc);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ goto err_dev;
+ }
+ info->rtc = rtc;
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
@@ -322,14 +305,24 @@
RTSR = RTSR_AL | RTSR_HZ;
return 0;
+err_dev:
+ platform_set_drvdata(pdev, NULL);
+ clk_put(info->clk);
+err_clk:
+ kfree(info);
+ return ret;
}
static int sa1100_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct sa1100_rtc *info = platform_get_drvdata(pdev);
- if (rtc)
- rtc_device_unregister(rtc);
+ if (info) {
+ rtc_device_unregister(info->rtc);
+ clk_put(info->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+ }
return 0;
}
@@ -337,15 +330,17 @@
#ifdef CONFIG_PM
static int sa1100_rtc_suspend(struct device *dev)
{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
- enable_irq_wake(IRQ_RTCAlrm);
+ enable_irq_wake(info->irq_alarm);
return 0;
}
static int sa1100_rtc_resume(struct device *dev)
{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
- disable_irq_wake(IRQ_RTCAlrm);
+ disable_irq_wake(info->irq_alarm);
return 0;
}
@@ -355,6 +350,13 @@
};
#endif
+static struct of_device_id sa1100_rtc_dt_ids[] = {
+ { .compatible = "mrvl,sa1100-rtc", },
+ { .compatible = "mrvl,mmp-rtc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
.remove = sa1100_rtc_remove,
@@ -363,6 +365,7 @@
#ifdef CONFIG_PM
.pm = &sa1100_rtc_pm_ops,
#endif
+ .of_match_table = sa1100_rtc_dt_ids,
},
};
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 0b7fed7..e7fecee 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1508,7 +1508,7 @@
ret = PTR_ERR(sport->clk);
goto unmap;
}
- clk_enable(sport->clk);
+ clk_prepare_enable(sport->clk);
sport->port.uartclk = clk_get_rate(sport->clk);
@@ -1531,8 +1531,8 @@
if (pdata && pdata->exit)
pdata->exit(pdev);
clkput:
+ clk_disable_unprepare(sport->clk);
clk_put(sport->clk);
- clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
@@ -1552,11 +1552,10 @@
if (sport) {
uart_remove_one_port(&imx_reg, &sport->port);
+ clk_disable_unprepare(sport->clk);
clk_put(sport->clk);
}
- clk_disable(sport->clk);
-
if (pdata && pdata->exit)
pdata->exit(pdev);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a..85ae4b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@
config USB_AT91
tristate "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@
config USB_ATMEL_USBA
tristate "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 724c69c..a9fab83 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -60,6 +60,9 @@
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
@@ -89,4 +92,37 @@
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
+#define __AMBA_DEV(busid, data, mask) \
+ { \
+ .coherent_dma_mask = mask, \
+ .init_name = busid, \
+ .platform_data = data, \
+ }
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, 0), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, ~0ULL), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .dma_mask = ~0ULL, \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
#endif
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index bd4272b..ead4a42 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -9,99 +9,182 @@
* representation into a hardware irq number that can be mapped back to a
* Linux irq number without any extra platform support code.
*
- * irq_domain is expected to be embedded in an interrupt controller's private
- * data structure.
+ * Interrupt controller "domain" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The domain
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a domain can cover more than one PIC if they have a flat number
+ * model). It's the domain callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are agnostic to whether or not
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart domain->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
*/
+
#ifndef _LINUX_IRQDOMAIN_H
#define _LINUX_IRQDOMAIN_H
-#include <linux/irq.h>
-#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/radix-tree.h>
-#ifdef CONFIG_IRQ_DOMAIN
struct device_node;
struct irq_domain;
+struct of_device_id;
+
+/* Number of irqs reserved for a legacy isa controller */
+#define NUM_ISA_INTERRUPTS 16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
/**
* struct irq_domain_ops - Methods for irq_domain objects
- * @to_irq: (optional) given a local hardware irq number, return the linux
- * irq number. If to_irq is not implemented, then the irq_domain
- * will use this translation: irq = (domain->irq_base + hwirq)
- * @dt_translate: Given a device tree node and interrupt specifier, decode
- * the hardware irq number and linux irq type value.
+ * @match: Match an interrupt controller device node to a host, returns
+ * 1 on a match
+ * @map: Create or update a mapping between a virtual irq number and a hw
+ * irq number. This is called only once for a given mapping.
+ * @unmap: Dispose of such a mapping
+ * @xlate: Given a device tree node and interrupt specifier, decode
+ * the hardware irq number and linux irq type value.
+ *
+ * Functions below are provided by the driver and called whenever a new mapping
+ * is created or an old mapping is disposed. The driver can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
*/
struct irq_domain_ops {
- unsigned int (*to_irq)(struct irq_domain *d, unsigned long hwirq);
-
-#ifdef CONFIG_OF
- int (*dt_translate)(struct irq_domain *d, struct device_node *node,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type);
-#endif /* CONFIG_OF */
+ int (*match)(struct irq_domain *d, struct device_node *node);
+ int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
+ void (*unmap)(struct irq_domain *d, unsigned int virq);
+ int (*xlate)(struct irq_domain *d, struct device_node *node,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type);
};
/**
* struct irq_domain - Hardware interrupt number translation object
- * @list: Element in global irq_domain list.
+ * @link: Element in global irq_domain list.
+ * @revmap_type: Method used for reverse mapping hwirq numbers to linux irq. This
+ * will be one of the IRQ_DOMAIN_MAP_* values.
+ * @revmap_data: Revmap method specific data.
+ * @ops: pointer to irq_domain methods
+ * @host_data: private data pointer for use by owner. Not touched by irq_domain
+ * core code.
* @irq_base: Start of irq_desc range assigned to the irq_domain. The creator
* of the irq_domain is responsible for allocating the array of
* irq_desc structures.
* @nr_irq: Number of irqs managed by the irq domain
* @hwirq_base: Starting number for hwirqs managed by the irq domain
- * @ops: pointer to irq_domain methods
- * @priv: private data pointer for use by owner. Not touched by irq_domain
- * core code.
* @of_node: (optional) Pointer to device tree nodes associated with the
* irq_domain. Used when decoding device tree interrupt specifiers.
*/
struct irq_domain {
- struct list_head list;
- unsigned int irq_base;
- unsigned int nr_irq;
- unsigned int hwirq_base;
+ struct list_head link;
+
+ /* type of reverse mapping_technique */
+ unsigned int revmap_type;
+ union {
+ struct {
+ unsigned int size;
+ unsigned int first_irq;
+ irq_hw_number_t first_hwirq;
+ } legacy;
+ struct {
+ unsigned int size;
+ unsigned int *revmap;
+ } linear;
+ struct radix_tree_root tree;
+ } revmap_data;
const struct irq_domain_ops *ops;
- void *priv;
+ void *host_data;
+ irq_hw_number_t inval_irq;
+
+ /* Optional device node pointer */
struct device_node *of_node;
};
-/**
- * irq_domain_to_irq() - Translate from a hardware irq to a linux irq number
- *
- * Returns the linux irq number associated with a hardware irq. By default,
- * the mapping is irq == domain->irq_base + hwirq, but this mapping can
- * be overridden if the irq_domain implements a .to_irq() hook.
- */
-static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
- unsigned long hwirq)
+#ifdef CONFIG_IRQ_DOMAIN
+struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
+ unsigned int size,
+ unsigned int first_irq,
+ irq_hw_number_t first_hwirq,
+ const struct irq_domain_ops *ops,
+ void *host_data);
+struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
+ unsigned int size,
+ const struct irq_domain_ops *ops,
+ void *host_data);
+struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
+ const struct irq_domain_ops *ops,
+ void *host_data);
+struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
+ const struct irq_domain_ops *ops,
+ void *host_data);
+
+extern struct irq_domain *irq_find_host(struct device_node *node);
+extern void irq_set_default_host(struct irq_domain *host);
+extern void irq_set_virq_count(unsigned int count);
+
+static inline struct irq_domain *irq_domain_add_legacy_isa(
+ struct device_node *of_node,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
- if (d->ops->to_irq)
- return d->ops->to_irq(d, hwirq);
- if (WARN_ON(hwirq < d->hwirq_base))
- return 0;
- return d->irq_base + hwirq - d->hwirq_base;
+ return irq_domain_add_legacy(of_node, NUM_ISA_INTERRUPTS, 0, 0, ops,
+ host_data);
}
+extern struct irq_domain *irq_find_host(struct device_node *node);
+extern void irq_set_default_host(struct irq_domain *host);
+extern void irq_set_virq_count(unsigned int count);
-#define irq_domain_for_each_hwirq(d, hw) \
- for (hw = d->hwirq_base; hw < d->hwirq_base + d->nr_irq; hw++)
-#define irq_domain_for_each_irq(d, hw, irq) \
- for (hw = d->hwirq_base, irq = irq_domain_to_irq(d, hw); \
- hw < d->hwirq_base + d->nr_irq; \
- hw++, irq = irq_domain_to_irq(d, hw))
+extern unsigned int irq_create_mapping(struct irq_domain *host,
+ irq_hw_number_t hwirq);
+extern void irq_dispose_mapping(unsigned int virq);
+extern unsigned int irq_find_mapping(struct irq_domain *host,
+ irq_hw_number_t hwirq);
+extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
+extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
+ irq_hw_number_t hwirq);
+extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
+ irq_hw_number_t hwirq);
+extern unsigned int irq_linear_revmap(struct irq_domain *host,
+ irq_hw_number_t hwirq);
-extern void irq_domain_add(struct irq_domain *domain);
-extern void irq_domain_del(struct irq_domain *domain);
+extern const struct irq_domain_ops irq_domain_simple_ops;
-extern struct irq_domain_ops irq_domain_simple_ops;
-#endif /* CONFIG_IRQ_DOMAIN */
+/* stock xlate functions */
+int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type);
+int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type);
+int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type);
-#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
-extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
+#if defined(CONFIG_OF_IRQ)
extern void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start);
-#else /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */
+#else /* CONFIG_OF_IRQ */
static inline void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start) { }
-#endif /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */
+#endif /* !CONFIG_OF_IRQ */
+
+#else /* CONFIG_IRQ_DOMAIN */
+static inline void irq_dispose_mapping(unsigned int virq) { }
+#endif /* !CONFIG_IRQ_DOMAIN */
#endif /* _LINUX_IRQDOMAIN_H */
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 3118623..01b925a 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -4,6 +4,7 @@
#include <linux/errno.h>
#include <linux/of.h>
+#ifdef CONFIG_OF_ADDRESS
extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
@@ -25,12 +26,37 @@
#define pci_address_to_pio pci_address_to_pio
#endif
-#ifdef CONFIG_PCI
+#else /* CONFIG_OF_ADDRESS */
+static inline int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r)
+{
+ return -EINVAL;
+}
+static inline struct device_node *of_find_matching_node_by_address(
+ struct device_node *from,
+ const struct of_device_id *matches,
+ u64 base_address)
+{
+ return NULL;
+}
+static inline void __iomem *of_iomap(struct device_node *device, int index)
+{
+ return NULL;
+}
+static inline const u32 *of_get_address(struct device_node *dev, int index,
+ u64 *size, unsigned int *flags)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF_ADDRESS */
+
+
+#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)
extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
u64 *size, unsigned int *flags);
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
-#else /* CONFIG_PCI */
+#else /* CONFIG_OF_ADDRESS && CONFIG_PCI */
static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r)
{
@@ -42,8 +68,7 @@
{
return NULL;
}
-#endif /* CONFIG_PCI */
-
+#endif /* CONFIG_OF_ADDRESS && CONFIG_PCI */
#endif /* __OF_ADDRESS_H */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index d0307ee..d229ad3 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -6,6 +6,7 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/ioport.h>
#include <linux/of.h>
@@ -65,9 +66,6 @@
extern unsigned int irq_create_of_mapping(struct device_node *controller,
const u32 *intspec,
unsigned int intsize);
-#ifdef CONFIG_IRQ_DOMAIN
-extern void irq_dispose_mapping(unsigned int irq);
-#endif
extern int of_irq_to_resource(struct device_node *dev, int index,
struct resource *r);
extern int of_irq_count(struct device_node *dev);
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 040ce2f..242fa35 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -81,7 +81,7 @@
struct device *parent);
extern struct platform_device *of_find_device_by_node(struct device_node *np);
-#if !defined(CONFIG_SPARC) /* SPARC has its own device registration method */
+#ifdef CONFIG_OF_ADDRESS /* device reg helpers depend on OF_ADDRESS */
/* Platform devices and busses creation */
extern struct platform_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
@@ -94,7 +94,15 @@
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent);
-#endif /* !CONFIG_SPARC */
+#else
+static inline int of_platform_populate(struct device_node *root,
+ const struct of_device_id *matches,
+ const struct of_dev_auxdata *lookup,
+ struct device *parent)
+{
+ return -ENODEV;
+}
+#endif /* !CONFIG_OF_ADDRESS */
#endif /* CONFIG_OF_DEVICE */
diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h
new file mode 100644
index 0000000..df67505
--- /dev/null
+++ b/include/linux/platform_data/tegra_emc.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ * Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_EMC_H_
+#define __TEGRA_EMC_H_
+
+#define TEGRA_EMC_NUM_REGS 46
+
+struct tegra_emc_table {
+ unsigned long rate;
+ u32 regs[TEGRA_EMC_NUM_REGS];
+};
+
+struct tegra_emc_pdata {
+ int num_tables;
+ struct tegra_emc_table *tables;
+};
+
+#endif
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a03a0ad..e3ff875 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/of.h>
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
@@ -70,6 +71,7 @@
s64 break_even_ns; /* Power break even for the entire domain. */
s64 max_off_time_ns; /* Maximum allowed "suspended" time. */
ktime_t power_off_time;
+ struct device_node *of_node; /* Node in device tree */
};
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
@@ -117,12 +119,22 @@
struct device *dev,
struct gpd_timing_data *td);
+extern int __pm_genpd_of_add_device(struct device_node *genpd_node,
+ struct device *dev,
+ struct gpd_timing_data *td);
+
static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
struct device *dev)
{
return __pm_genpd_add_device(genpd, dev, NULL);
}
+static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
+ struct device *dev)
+{
+ return __pm_genpd_of_add_device(genpd_node, dev, NULL);
+}
+
extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
struct device *dev);
extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
deleted file mode 100644
index a6d0140..0000000
--- a/include/linux/regulator/bq24022.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
- * 1-Cell Li-Ion Charger connected via GPIOs.
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct regulator_init_data;
-
-/**
- * bq24022_mach_info - platform data for bq24022
- * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
- * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
- */
-struct bq24022_mach_info {
- int gpio_nce;
- int gpio_iset2;
- struct regulator_init_data *init_data;
-};
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 1f9e265..af48e59 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1,189 +1,793 @@
+#include <linux/debugfs.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+
+#define IRQ_DOMAIN_MAP_LEGACY 0 /* driver allocated fixed range of irqs.
+ * ie. legacy 8259, gets irqs 1..15 */
+#define IRQ_DOMAIN_MAP_NOMAP 1 /* no fast reverse mapping */
+#define IRQ_DOMAIN_MAP_LINEAR 2 /* linear map of interrupts */
+#define IRQ_DOMAIN_MAP_TREE 3 /* radix tree */
static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);
+static DEFINE_MUTEX(revmap_trees_mutex);
+static unsigned int irq_virq_count = NR_IRQS;
+static struct irq_domain *irq_default_domain;
+
/**
- * irq_domain_add() - Register an irq_domain
- * @domain: ptr to initialized irq_domain structure
+ * irq_domain_alloc() - Allocate a new irq_domain data structure
+ * @of_node: optional device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @ops: map/unmap domain callbacks
+ * @host_data: Controller private data pointer
*
- * Registers an irq_domain structure. The irq_domain must at a minimum be
- * initialized with an ops structure pointer, and either a ->to_irq hook or
- * a valid irq_base value. Everything else is optional.
+ * Allocates and initialize and irq_domain structure. Caller is expected to
+ * register allocated irq_domain with irq_domain_register(). Returns pointer
+ * to IRQ domain, or NULL on failure.
*/
-void irq_domain_add(struct irq_domain *domain)
-{
- struct irq_data *d;
- int hwirq, irq;
-
- /*
- * This assumes that the irq_domain owner has already allocated
- * the irq_descs. This block will be removed when support for dynamic
- * allocation of irq_descs is added to irq_domain.
- */
- irq_domain_for_each_irq(domain, hwirq, irq) {
- d = irq_get_irq_data(irq);
- if (!d) {
- WARN(1, "error: assigning domain to non existant irq_desc");
- return;
- }
- if (d->domain) {
- /* things are broken; just report, don't clean up */
- WARN(1, "error: irq_desc already assigned to a domain");
- return;
- }
- d->domain = domain;
- d->hwirq = hwirq;
- }
-
- mutex_lock(&irq_domain_mutex);
- list_add(&domain->list, &irq_domain_list);
- mutex_unlock(&irq_domain_mutex);
-}
-
-/**
- * irq_domain_del() - Unregister an irq_domain
- * @domain: ptr to registered irq_domain.
- */
-void irq_domain_del(struct irq_domain *domain)
-{
- struct irq_data *d;
- int hwirq, irq;
-
- mutex_lock(&irq_domain_mutex);
- list_del(&domain->list);
- mutex_unlock(&irq_domain_mutex);
-
- /* Clear the irq_domain assignments */
- irq_domain_for_each_irq(domain, hwirq, irq) {
- d = irq_get_irq_data(irq);
- d->domain = NULL;
- }
-}
-
-#if defined(CONFIG_OF_IRQ)
-/**
- * irq_create_of_mapping() - Map a linux irq number from a DT interrupt spec
- *
- * Used by the device tree interrupt mapping code to translate a device tree
- * interrupt specifier to a valid linux irq number. Returns either a valid
- * linux IRQ number or 0.
- *
- * When the caller no longer need the irq number returned by this function it
- * should arrange to call irq_dispose_mapping().
- */
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- struct irq_domain *domain;
- unsigned long hwirq;
- unsigned int irq, type;
- int rc = -EINVAL;
-
- /* Find a domain which can translate the irq spec */
- mutex_lock(&irq_domain_mutex);
- list_for_each_entry(domain, &irq_domain_list, list) {
- if (!domain->ops->dt_translate)
- continue;
- rc = domain->ops->dt_translate(domain, controller,
- intspec, intsize, &hwirq, &type);
- if (rc == 0)
- break;
- }
- mutex_unlock(&irq_domain_mutex);
-
- if (rc != 0)
- return 0;
-
- irq = irq_domain_to_irq(domain, hwirq);
- if (type != IRQ_TYPE_NONE)
- irq_set_irq_type(irq, type);
- pr_debug("%s: mapped hwirq=%i to irq=%i, flags=%x\n",
- controller->full_name, (int)hwirq, irq, type);
- return irq;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-
-/**
- * irq_dispose_mapping() - Discard a mapping created by irq_create_of_mapping()
- * @irq: linux irq number to be discarded
- *
- * Calling this function indicates the caller no longer needs a reference to
- * the linux irq number returned by a prior call to irq_create_of_mapping().
- */
-void irq_dispose_mapping(unsigned int irq)
-{
- /*
- * nothing yet; will be filled when support for dynamic allocation of
- * irq_descs is added to irq_domain
- */
-}
-EXPORT_SYMBOL_GPL(irq_dispose_mapping);
-
-int irq_domain_simple_dt_translate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type)
-{
- if (d->of_node != controller)
- return -EINVAL;
- if (intsize < 1)
- return -EINVAL;
- if (d->nr_irq && ((intspec[0] < d->hwirq_base) ||
- (intspec[0] >= d->hwirq_base + d->nr_irq)))
- return -EINVAL;
-
- *out_hwirq = intspec[0];
- *out_type = IRQ_TYPE_NONE;
- if (intsize > 1)
- *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
- return 0;
-}
-
-/**
- * irq_domain_create_simple() - Set up a 'simple' translation range
- */
-void irq_domain_add_simple(struct device_node *controller, int irq_base)
+static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
+ unsigned int revmap_type,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
struct irq_domain *domain;
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
- if (!domain) {
- WARN_ON(1);
- return;
+ if (WARN_ON(!domain))
+ return NULL;
+
+ /* Fill structure */
+ domain->revmap_type = revmap_type;
+ domain->ops = ops;
+ domain->host_data = host_data;
+ domain->of_node = of_node_get(of_node);
+
+ return domain;
+}
+
+static void irq_domain_add(struct irq_domain *domain)
+{
+ mutex_lock(&irq_domain_mutex);
+ list_add(&domain->link, &irq_domain_list);
+ mutex_unlock(&irq_domain_mutex);
+ pr_debug("irq: Allocated domain of type %d @0x%p\n",
+ domain->revmap_type, domain);
+}
+
+static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain,
+ irq_hw_number_t hwirq)
+{
+ irq_hw_number_t first_hwirq = domain->revmap_data.legacy.first_hwirq;
+ int size = domain->revmap_data.legacy.size;
+
+ if (WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size))
+ return 0;
+ return hwirq - first_hwirq + domain->revmap_data.legacy.first_irq;
+}
+
+/**
+ * irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
+ * @of_node: pointer to interrupt controller's device tree node.
+ * @size: total number of irqs in legacy mapping
+ * @first_irq: first number of irq block assigned to the domain
+ * @first_hwirq: first hwirq number to use for the translation. Should normally
+ * be '0', but a positive integer can be used if the effective
+ * hwirqs numbering does not begin at zero.
+ * @ops: map/unmap domain callbacks
+ * @host_data: Controller private data pointer
+ *
+ * Note: the map() callback will be called before this function returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller).
+ */
+struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
+ unsigned int size,
+ unsigned int first_irq,
+ irq_hw_number_t first_hwirq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ struct irq_domain *domain;
+ unsigned int i;
+
+ domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_LEGACY, ops, host_data);
+ if (!domain)
+ return NULL;
+
+ domain->revmap_data.legacy.first_irq = first_irq;
+ domain->revmap_data.legacy.first_hwirq = first_hwirq;
+ domain->revmap_data.legacy.size = size;
+
+ mutex_lock(&irq_domain_mutex);
+ /* Verify that all the irqs are available */
+ for (i = 0; i < size; i++) {
+ int irq = first_irq + i;
+ struct irq_data *irq_data = irq_get_irq_data(irq);
+
+ if (WARN_ON(!irq_data || irq_data->domain)) {
+ mutex_unlock(&irq_domain_mutex);
+ of_node_put(domain->of_node);
+ kfree(domain);
+ return NULL;
+ }
}
- domain->irq_base = irq_base;
- domain->of_node = of_node_get(controller);
- domain->ops = &irq_domain_simple_ops;
- irq_domain_add(domain);
-}
-EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+ /* Claim all of the irqs before registering a legacy domain */
+ for (i = 0; i < size; i++) {
+ struct irq_data *irq_data = irq_get_irq_data(first_irq + i);
+ irq_data->hwirq = first_hwirq + i;
+ irq_data->domain = domain;
+ }
+ mutex_unlock(&irq_domain_mutex);
+ for (i = 0; i < size; i++) {
+ int irq = first_irq + i;
+ int hwirq = first_hwirq + i;
+
+ /* IRQ0 gets ignored */
+ if (!irq)
+ continue;
+
+ /* Legacy flags are left to default at this point,
+ * one can then use irq_create_mapping() to
+ * explicitly change them
+ */
+ ops->map(domain, irq, hwirq);
+
+ /* Clear norequest flags */
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ }
+
+ irq_domain_add(domain);
+ return domain;
+}
+
+/**
+ * irq_domain_add_linear() - Allocate and register a legacy revmap irq_domain.
+ * @of_node: pointer to interrupt controller's device tree node.
+ * @ops: map/unmap domain callbacks
+ * @host_data: Controller private data pointer
+ */
+struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
+ unsigned int size,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ struct irq_domain *domain;
+ unsigned int *revmap;
+
+ revmap = kzalloc(sizeof(*revmap) * size, GFP_KERNEL);
+ if (WARN_ON(!revmap))
+ return NULL;
+
+ domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_LINEAR, ops, host_data);
+ if (!domain) {
+ kfree(revmap);
+ return NULL;
+ }
+ domain->revmap_data.linear.size = size;
+ domain->revmap_data.linear.revmap = revmap;
+ irq_domain_add(domain);
+ return domain;
+}
+
+struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ struct irq_domain *domain = irq_domain_alloc(of_node,
+ IRQ_DOMAIN_MAP_NOMAP, ops, host_data);
+ if (domain)
+ irq_domain_add(domain);
+ return domain;
+}
+
+/**
+ * irq_domain_add_tree()
+ * @of_node: pointer to interrupt controller's device tree node.
+ * @ops: map/unmap domain callbacks
+ *
+ * Note: The radix tree will be allocated later during boot automatically
+ * (the reverse mapping will use the slow path until that happens).
+ */
+struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ struct irq_domain *domain = irq_domain_alloc(of_node,
+ IRQ_DOMAIN_MAP_TREE, ops, host_data);
+ if (domain) {
+ INIT_RADIX_TREE(&domain->revmap_data.tree, GFP_KERNEL);
+ irq_domain_add(domain);
+ }
+ return domain;
+}
+
+/**
+ * irq_find_host() - Locates a domain for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+struct irq_domain *irq_find_host(struct device_node *node)
+{
+ struct irq_domain *h, *found = NULL;
+ int rc;
+
+ /* We might want to match the legacy controller last since
+ * it might potentially be set to match all interrupts in
+ * the absence of a device node. This isn't a problem so far
+ * yet though...
+ */
+ mutex_lock(&irq_domain_mutex);
+ list_for_each_entry(h, &irq_domain_list, link) {
+ if (h->ops->match)
+ rc = h->ops->match(h, node);
+ else
+ rc = (h->of_node != NULL) && (h->of_node == node);
+
+ if (rc) {
+ found = h;
+ break;
+ }
+ }
+ mutex_unlock(&irq_domain_mutex);
+ return found;
+}
+EXPORT_SYMBOL_GPL(irq_find_host);
+
+/**
+ * irq_set_default_host() - Set a "default" irq domain
+ * @domain: default domain pointer
+ *
+ * For convenience, it's possible to set a "default" domain that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+void irq_set_default_host(struct irq_domain *domain)
+{
+ pr_debug("irq: Default domain set to @0x%p\n", domain);
+
+ irq_default_domain = domain;
+}
+
+/**
+ * irq_set_virq_count() - Set the maximum number of linux irqs
+ * @count: number of linux irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+void irq_set_virq_count(unsigned int count)
+{
+ pr_debug("irq: Trying to set virq count to %d\n", count);
+
+ BUG_ON(count < NUM_ISA_INTERRUPTS);
+ if (count < NR_IRQS)
+ irq_virq_count = count;
+}
+
+static int irq_setup_virq(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct irq_data *irq_data = irq_get_irq_data(virq);
+
+ irq_data->hwirq = hwirq;
+ irq_data->domain = domain;
+ if (domain->ops->map(domain, virq, hwirq)) {
+ pr_debug("irq: -> mapping failed, freeing\n");
+ irq_data->domain = NULL;
+ irq_data->hwirq = 0;
+ return -1;
+ }
+
+ irq_clear_status_flags(virq, IRQ_NOREQUEST);
+
+ return 0;
+}
+
+/**
+ * irq_create_direct_mapping() - Allocate an irq for direct mapping
+ * @domain: domain to allocate the irq for or NULL for default domain
+ *
+ * This routine is used for irq controllers which can choose the hardware
+ * interrupt numbers they generate. In such a case it's simplest to use
+ * the linux irq as the hardware interrupt number.
+ */
+unsigned int irq_create_direct_mapping(struct irq_domain *domain)
+{
+ unsigned int virq;
+
+ if (domain == NULL)
+ domain = irq_default_domain;
+
+ BUG_ON(domain == NULL);
+ WARN_ON(domain->revmap_type != IRQ_DOMAIN_MAP_NOMAP);
+
+ virq = irq_alloc_desc_from(1, 0);
+ if (!virq) {
+ pr_debug("irq: create_direct virq allocation failed\n");
+ return 0;
+ }
+ if (virq >= irq_virq_count) {
+ pr_err("ERROR: no free irqs available below %i maximum\n",
+ irq_virq_count);
+ irq_free_desc(virq);
+ return 0;
+ }
+
+ pr_debug("irq: create_direct obtained virq %d\n", virq);
+
+ if (irq_setup_virq(domain, virq, virq)) {
+ irq_free_desc(virq);
+ return 0;
+ }
+
+ return virq;
+}
+
+/**
+ * irq_create_mapping() - Map a hardware interrupt into linux irq space
+ * @domain: domain owning this hardware interrupt or NULL for default domain
+ * @hwirq: hardware irq number in that domain space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * irq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+unsigned int irq_create_mapping(struct irq_domain *domain,
+ irq_hw_number_t hwirq)
+{
+ unsigned int virq, hint;
+
+ pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
+
+ /* Look for default domain if nececssary */
+ if (domain == NULL)
+ domain = irq_default_domain;
+ if (domain == NULL) {
+ printk(KERN_WARNING "irq_create_mapping called for"
+ " NULL domain, hwirq=%lx\n", hwirq);
+ WARN_ON(1);
+ return 0;
+ }
+ pr_debug("irq: -> using domain @%p\n", domain);
+
+ /* Check if mapping already exists */
+ virq = irq_find_mapping(domain, hwirq);
+ if (virq) {
+ pr_debug("irq: -> existing mapping on virq %d\n", virq);
+ return virq;
+ }
+
+ /* Get a virtual interrupt number */
+ if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
+ return irq_domain_legacy_revmap(domain, hwirq);
+
+ /* Allocate a virtual interrupt number */
+ hint = hwirq % irq_virq_count;
+ if (hint == 0)
+ hint++;
+ virq = irq_alloc_desc_from(hint, 0);
+ if (!virq)
+ virq = irq_alloc_desc_from(1, 0);
+ if (!virq) {
+ pr_debug("irq: -> virq allocation failed\n");
+ return 0;
+ }
+
+ if (irq_setup_virq(domain, virq, hwirq)) {
+ if (domain->revmap_type != IRQ_DOMAIN_MAP_LEGACY)
+ irq_free_desc(virq);
+ return 0;
+ }
+
+ pr_debug("irq: irq %lu on domain %s mapped to virtual irq %u\n",
+ hwirq, domain->of_node ? domain->of_node->full_name : "null", virq);
+
+ return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+ const u32 *intspec, unsigned int intsize)
+{
+ struct irq_domain *domain;
+ irq_hw_number_t hwirq;
+ unsigned int type = IRQ_TYPE_NONE;
+ unsigned int virq;
+
+ domain = controller ? irq_find_host(controller) : irq_default_domain;
+ if (!domain) {
+#ifdef CONFIG_MIPS
+ /*
+ * Workaround to avoid breaking interrupt controller drivers
+ * that don't yet register an irq_domain. This is temporary
+ * code. ~~~gcl, Feb 24, 2012
+ *
+ * Scheduled for removal in Linux v3.6. That should be enough
+ * time.
+ */
+ if (intsize > 0)
+ return intspec[0];
+#endif
+ printk(KERN_WARNING "irq: no irq domain found for %s !\n",
+ controller->full_name);
+ return 0;
+ }
+
+ /* If domain has no translation, then we assume interrupt line */
+ if (domain->ops->xlate == NULL)
+ hwirq = intspec[0];
+ else {
+ if (domain->ops->xlate(domain, controller, intspec, intsize,
+ &hwirq, &type))
+ return 0;
+ }
+
+ /* Create mapping */
+ virq = irq_create_mapping(domain, hwirq);
+ if (!virq)
+ return virq;
+
+ /* Set type if specified and different than the current one */
+ if (type != IRQ_TYPE_NONE &&
+ type != (irqd_get_trigger_type(irq_get_irq_data(virq))))
+ irq_set_irq_type(virq, type);
+ return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
+/**
+ * irq_dispose_mapping() - Unmap an interrupt
+ * @virq: linux irq number of the interrupt to unmap
+ */
+void irq_dispose_mapping(unsigned int virq)
+{
+ struct irq_data *irq_data = irq_get_irq_data(virq);
+ struct irq_domain *domain;
+ irq_hw_number_t hwirq;
+
+ if (!virq || !irq_data)
+ return;
+
+ domain = irq_data->domain;
+ if (WARN_ON(domain == NULL))
+ return;
+
+ /* Never unmap legacy interrupts */
+ if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
+ return;
+
+ irq_set_status_flags(virq, IRQ_NOREQUEST);
+
+ /* remove chip and handler */
+ irq_set_chip_and_handler(virq, NULL, NULL);
+
+ /* Make sure it's completed */
+ synchronize_irq(virq);
+
+ /* Tell the PIC about it */
+ if (domain->ops->unmap)
+ domain->ops->unmap(domain, virq);
+ smp_mb();
+
+ /* Clear reverse map */
+ hwirq = irq_data->hwirq;
+ switch(domain->revmap_type) {
+ case IRQ_DOMAIN_MAP_LINEAR:
+ if (hwirq < domain->revmap_data.linear.size)
+ domain->revmap_data.linear.revmap[hwirq] = 0;
+ break;
+ case IRQ_DOMAIN_MAP_TREE:
+ mutex_lock(&revmap_trees_mutex);
+ radix_tree_delete(&domain->revmap_data.tree, hwirq);
+ mutex_unlock(&revmap_trees_mutex);
+ break;
+ }
+
+ irq_free_desc(virq);
+}
+EXPORT_SYMBOL_GPL(irq_dispose_mapping);
+
+/**
+ * irq_find_mapping() - Find a linux irq from an hw irq number.
+ * @domain: domain owning this hardware interrupt
+ * @hwirq: hardware irq number in that domain space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+unsigned int irq_find_mapping(struct irq_domain *domain,
+ irq_hw_number_t hwirq)
+{
+ unsigned int i;
+ unsigned int hint = hwirq % irq_virq_count;
+
+ /* Look for default domain if nececssary */
+ if (domain == NULL)
+ domain = irq_default_domain;
+ if (domain == NULL)
+ return 0;
+
+ /* legacy -> bail early */
+ if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
+ return irq_domain_legacy_revmap(domain, hwirq);
+
+ /* Slow path does a linear search of the map */
+ if (hint == 0)
+ hint = 1;
+ i = hint;
+ do {
+ struct irq_data *data = irq_get_irq_data(i);
+ if (data && (data->domain == domain) && (data->hwirq == hwirq))
+ return i;
+ i++;
+ if (i >= irq_virq_count)
+ i = 1;
+ } while(i != hint);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(irq_find_mapping);
+
+/**
+ * irq_radix_revmap_lookup() - Find a linux irq from a hw irq number.
+ * @domain: domain owning this hardware interrupt
+ * @hwirq: hardware irq number in that domain space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+unsigned int irq_radix_revmap_lookup(struct irq_domain *domain,
+ irq_hw_number_t hwirq)
+{
+ struct irq_data *irq_data;
+
+ if (WARN_ON_ONCE(domain->revmap_type != IRQ_DOMAIN_MAP_TREE))
+ return irq_find_mapping(domain, hwirq);
+
+ /*
+ * Freeing an irq can delete nodes along the path to
+ * do the lookup via call_rcu.
+ */
+ rcu_read_lock();
+ irq_data = radix_tree_lookup(&domain->revmap_data.tree, hwirq);
+ rcu_read_unlock();
+
+ /*
+ * If found in radix tree, then fine.
+ * Else fallback to linear lookup - this should not happen in practice
+ * as it means that we failed to insert the node in the radix tree.
+ */
+ return irq_data ? irq_data->irq : irq_find_mapping(domain, hwirq);
+}
+
+/**
+ * irq_radix_revmap_insert() - Insert a hw irq to linux irq number mapping.
+ * @domain: domain owning this hardware interrupt
+ * @virq: linux irq number
+ * @hwirq: hardware irq number in that domain space
+ *
+ * This is for use by irq controllers that use a radix tree reverse
+ * mapping for fast lookup.
+ */
+void irq_radix_revmap_insert(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct irq_data *irq_data = irq_get_irq_data(virq);
+
+ if (WARN_ON(domain->revmap_type != IRQ_DOMAIN_MAP_TREE))
+ return;
+
+ if (virq) {
+ mutex_lock(&revmap_trees_mutex);
+ radix_tree_insert(&domain->revmap_data.tree, hwirq, irq_data);
+ mutex_unlock(&revmap_trees_mutex);
+ }
+}
+
+/**
+ * irq_linear_revmap() - Find a linux irq from a hw irq number.
+ * @domain: domain owning this hardware interrupt
+ * @hwirq: hardware irq number in that domain space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+unsigned int irq_linear_revmap(struct irq_domain *domain,
+ irq_hw_number_t hwirq)
+{
+ unsigned int *revmap;
+
+ if (WARN_ON_ONCE(domain->revmap_type != IRQ_DOMAIN_MAP_LINEAR))
+ return irq_find_mapping(domain, hwirq);
+
+ /* Check revmap bounds */
+ if (unlikely(hwirq >= domain->revmap_data.linear.size))
+ return irq_find_mapping(domain, hwirq);
+
+ /* Check if revmap was allocated */
+ revmap = domain->revmap_data.linear.revmap;
+ if (unlikely(revmap == NULL))
+ return irq_find_mapping(domain, hwirq);
+
+ /* Fill up revmap with slow path if no mapping found */
+ if (unlikely(!revmap[hwirq]))
+ revmap[hwirq] = irq_find_mapping(domain, hwirq);
+
+ return revmap[hwirq];
+}
+
+#ifdef CONFIG_VIRQ_DEBUG
+static int virq_debug_show(struct seq_file *m, void *private)
+{
+ unsigned long flags;
+ struct irq_desc *desc;
+ const char *p;
+ static const char none[] = "none";
+ void *data;
+ int i;
+
+ seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
+ "chip name", "chip data", "domain name");
+
+ for (i = 1; i < nr_irqs; i++) {
+ desc = irq_to_desc(i);
+ if (!desc)
+ continue;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ if (desc->action && desc->action->handler) {
+ struct irq_chip *chip;
+
+ seq_printf(m, "%5d ", i);
+ seq_printf(m, "0x%05lx ", desc->irq_data.hwirq);
+
+ chip = irq_desc_get_chip(desc);
+ if (chip && chip->name)
+ p = chip->name;
+ else
+ p = none;
+ seq_printf(m, "%-15s ", p);
+
+ data = irq_desc_get_chip_data(desc);
+ seq_printf(m, "0x%16p ", data);
+
+ if (desc->irq_data.domain->of_node)
+ p = desc->irq_data.domain->of_node->full_name;
+ else
+ p = none;
+ seq_printf(m, "%s\n", p);
+ }
+
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ }
+
+ return 0;
+}
+
+static int virq_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, virq_debug_show, inode->i_private);
+}
+
+static const struct file_operations virq_debug_fops = {
+ .open = virq_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init irq_debugfs_init(void)
+{
+ if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
+ NULL, &virq_debug_fops) == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+__initcall(irq_debugfs_init);
+#endif /* CONFIG_VIRQ_DEBUG */
+
+int irq_domain_simple_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ return 0;
+}
+
+/**
+ * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
+ *
+ * Device Tree IRQ specifier translation function which works with one cell
+ * bindings where the cell value maps directly to the hwirq number.
+ */
+int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
+
+/**
+ * irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
+ *
+ * Device Tree IRQ specifier translation function which works with two cell
+ * bindings where the cell values map directly to the hwirq number
+ * and linux irq flags.
+ */
+int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 2))
+ return -EINVAL;
+ *out_hwirq = intspec[0];
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
+
+/**
+ * irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
+ *
+ * Device Tree IRQ specifier translation function which works with either one
+ * or two cell bindings where the cell values map directly to the hwirq number
+ * and linux irq flags.
+ *
+ * Note: don't use this function unless your interrupt controller explicitly
+ * supports both one and two cell bindings. For the majority of controllers
+ * the _onecell() or _twocell() variants above should be used.
+ */
+int irq_domain_xlate_onetwocell(struct irq_domain *d,
+ struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+ *out_hwirq = intspec[0];
+ *out_type = (intsize > 1) ? intspec[1] : IRQ_TYPE_NONE;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
+
+const struct irq_domain_ops irq_domain_simple_ops = {
+ .map = irq_domain_simple_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
+
+#ifdef CONFIG_OF_IRQ
void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start)
{
struct device_node *node;
- pr_info("looking for phys_base=%llx, irq_start=%i\n",
+ pr_debug("looking for phys_base=%llx, irq_start=%i\n",
(unsigned long long) phys_base, (int) irq_start);
node = of_find_matching_node_by_address(NULL, match, phys_base);
if (node)
- irq_domain_add_simple(node, irq_start);
- else
- pr_info("no node found\n");
+ irq_domain_add_legacy(node, 32, irq_start, 0,
+ &irq_domain_simple_ops, NULL);
}
EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
-#endif /* CONFIG_OF_IRQ */
-
-struct irq_domain_ops irq_domain_simple_ops = {
-#ifdef CONFIG_OF_IRQ
- .dt_translate = irq_domain_simple_dt_translate,
-#endif /* CONFIG_OF_IRQ */
-};
-EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
+#endif