[TG3]: Add basic register access function pointers
This patch adds the basic function pointers to do register accesses in
the fast path. This was suggested by David Miller. The idea is that
various register access methods for different hardware errata can easily
be implemented with these function pointers and performance will not be
degraded on chips that use normal register access methods.
The various register read write macros (e.g. tw32, tr32, tw32_mailbox)
are redefined to call the function pointers.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 6d4ab1e..13283c2 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -366,7 +366,7 @@
}
}
-static inline void _tw32_rx_mbox(struct tg3 *tp, u32 off, u32 val)
+static void tg3_write32_rx_mbox(struct tg3 *tp, u32 off, u32 val)
{
void __iomem *mbox = tp->regs + off;
writel(val, mbox);
@@ -374,7 +374,7 @@
readl(mbox);
}
-static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
+static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
{
void __iomem *mbox = tp->regs + off;
writel(val, mbox);
@@ -384,17 +384,23 @@
readl(mbox);
}
-#define tw32_mailbox(reg, val) writel(((val) & 0xffffffff), tp->regs + (reg))
-#define tw32_rx_mbox(reg, val) _tw32_rx_mbox(tp, reg, val)
-#define tw32_tx_mbox(reg, val) _tw32_tx_mbox(tp, reg, val)
+static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
+{
+ writel(val, tp->regs + off);
+}
-#define tw32(reg,val) tg3_write_indirect_reg32(tp,(reg),(val))
+static u32 tg3_read32(struct tg3 *tp, u32 off)
+{
+ return (readl(tp->regs + off));
+}
+
+#define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val)
+#define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val)
+#define tw32_tx_mbox(reg, val) tp->write32_tx_mbox(tp, reg, val)
+
+#define tw32(reg,val) tp->write32(tp, reg, val)
#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val))
-#define tw16(reg,val) writew(((val) & 0xffff), tp->regs + (reg))
-#define tw8(reg,val) writeb(((val) & 0xff), tp->regs + (reg))
-#define tr32(reg) readl(tp->regs + (reg))
-#define tr16(reg) readw(tp->regs + (reg))
-#define tr8(reg) readb(tp->regs + (reg))
+#define tr32(reg) tp->read32(tp, reg)
static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
{
@@ -9325,6 +9331,12 @@
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
}
+ tp->read32 = tg3_read32;
+ tp->write32 = tg3_write_indirect_reg32;
+ tp->write32_mbox = tg3_write32;
+ tp->write32_tx_mbox = tg3_write32_tx_mbox;
+ tp->write32_rx_mbox = tg3_write32_rx_mbox;
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
* determined before calling tg3_set_power_state() so that