| /* |
| * Setup pointers to hardware-dependent routines. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle |
| * Copyright (C) 2001 MIPS Technologies, Inc. |
| */ |
| #include <linux/config.h> |
| #include <linux/eisa.h> |
| #include <linux/hdreg.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/mm.h> |
| #include <linux/console.h> |
| #include <linux/fb.h> |
| #include <linux/ide.h> |
| #include <asm/bootinfo.h> |
| #include <asm/irq.h> |
| #include <asm/jazz.h> |
| #include <asm/jazzdma.h> |
| #include <asm/ptrace.h> |
| #include <asm/reboot.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/time.h> |
| #include <asm/traps.h> |
| |
| extern asmlinkage void jazz_handle_int(void); |
| |
| extern void jazz_machine_restart(char *command); |
| extern void jazz_machine_halt(void); |
| extern void jazz_machine_power_off(void); |
| |
| static void __init jazz_time_init(struct irqaction *irq) |
| { |
| /* set the clock to 100 Hz */ |
| r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9); |
| setup_irq(JAZZ_TIMER_IRQ, irq); |
| } |
| |
| static struct resource jazz_io_resources[] = { |
| { "dma1", 0x00, 0x1f, IORESOURCE_BUSY }, |
| { "timer", 0x40, 0x5f, IORESOURCE_BUSY }, |
| { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY }, |
| { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY }, |
| }; |
| |
| void __init plat_setup(void) |
| { |
| int i; |
| |
| /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */ |
| add_wired_entry (0x02000017, 0x03c00017, 0xe0000000, PM_64K); |
| |
| /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */ |
| add_wired_entry (0x02400017, 0x02440017, 0xe2000000, PM_16M); |
| |
| /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */ |
| add_wired_entry (0x01800017, 0x01000017, 0xe4000000, PM_4M); |
| |
| set_io_port_base(JAZZ_PORT_BASE); |
| #ifdef CONFIG_EISA |
| if (mips_machtype == MACH_MIPS_MAGNUM_4000) |
| EISA_bus = 1; |
| #endif |
| isa_slot_offset = 0xe3000000; |
| |
| /* request I/O space for devices used on all i[345]86 PCs */ |
| for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) |
| request_resource(&ioport_resource, jazz_io_resources + i); |
| |
| board_timer_setup = jazz_time_init; |
| /* The RTC is outside the port address space */ |
| |
| _machine_restart = jazz_machine_restart; |
| _machine_halt = jazz_machine_halt; |
| _machine_power_off = jazz_machine_power_off; |
| |
| #warning "Somebody should check if screen_info is ok for Jazz." |
| |
| screen_info = (struct screen_info) { |
| 0, 0, /* orig-x, orig-y */ |
| 0, /* unused */ |
| 0, /* orig_video_page */ |
| 0, /* orig_video_mode */ |
| 160, /* orig_video_cols */ |
| 0, 0, 0, /* unused, ega_bx, unused */ |
| 64, /* orig_video_lines */ |
| 0, /* orig_video_isVGA */ |
| 16 /* orig_video_points */ |
| }; |
| |
| vdma_init(); |
| } |