Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
sh64: Update defconfigs.
sh64: fix dma_cache_sync() compilation
sh64: Move DMA macros from pci.h to scatterlist.h.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index a30dd44..681e2b3 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -464,8 +464,8 @@
Nuff said. If your code deviates too much from this, it is likely
to be rejected without further review, and without comment.
-Once significant exception is when moving code from one file to
-another in this case you should not modify the moved code at all in
+One significant exception is when moving code from one file to
+another -- in this case you should not modify the moved code at all in
the same patch which moves it. This clearly delineates the act of
moving the code and your changes. This greatly aids review of the
actual differences and allows tools to better track the history of
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index 2f75e75..fc49b79 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -785,3 +785,41 @@
After completing your hook, you should jump to the address
that was in this field before your boot loader overwrote it
(relocated, if appropriate.)
+
+
+**** 32-bit BOOT PROTOCOL
+
+For machine with some new BIOS other than legacy BIOS, such as EFI,
+LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
+based on legacy BIOS can not be used, so a 32-bit boot protocol needs
+to be defined.
+
+In 32-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+should be allocated and initialized to all zero. Then the setup header
+from offset 0x01f1 of kernel image on should be loaded into struct
+boot_params and examined. The end of setup header can be calculated as
+follow:
+
+ 0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as that
+described in zero-page.txt.
+
+After setupping the struct boot_params, the boot loader can load the
+32/64-bit kernel in the same way as that of 16-bit boot protocol.
+
+In 32-bit boot protocol, the kernel is started by jumping to the
+32-bit kernel entry point, which is the start address of loaded
+32/64-bit kernel.
+
+At entry, the CPU must be in 32-bit protected mode with paging
+disabled; a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
+address of the struct boot_params; %ebp, %edi and %ebx must be zero.
diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt
index 6c0817c..169ad42 100644
--- a/Documentation/i386/zero-page.txt
+++ b/Documentation/i386/zero-page.txt
@@ -1,99 +1,31 @@
----------------------------------------------------------------------------
-!!!!!!!!!!!!!!!WARNING!!!!!!!!
-The zero page is a kernel internal data structure, not a stable ABI. It might change
-without warning and the kernel has no way to detect old version of it.
-If you're writing some external code like a boot loader you should only use
-the stable versioned real mode boot protocol described in boot.txt. Otherwise the kernel
-might break you at any time.
-!!!!!!!!!!!!!WARNING!!!!!!!!!!!
-----------------------------------------------------------------------------
+The additional fields in struct boot_params as a part of 32-bit boot
+protocol of kernel. These should be filled by bootloader or 16-bit
+real-mode setup code of the kernel. References/settings to it mainly
+are in:
-Summary of boot_params layout (kernel point of view)
- ( collected by Hans Lermen and Martin Mares )
-
-The contents of boot_params are used to pass parameters from the
-16-bit realmode code of the kernel to the 32-bit part. References/settings
-to it mainly are in:
+ include/asm-x86/bootparam.h
- arch/i386/boot/setup.S
- arch/i386/boot/video.S
- arch/i386/kernel/head.S
- arch/i386/kernel/setup.c
-
-Offset Type Description
------- ---- -----------
- 0 32 bytes struct screen_info, SCREEN_INFO
- ATTENTION, overlaps the following !!!
- 2 unsigned short EXT_MEM_K, extended memory size in Kb (from int 0x15)
- 0x20 unsigned short CL_MAGIC, commandline magic number (=0xA33F)
- 0x22 unsigned short CL_OFFSET, commandline offset
- Address of commandline is calculated:
- 0x90000 + contents of CL_OFFSET
- (only taken, when CL_MAGIC = 0xA33F)
- 0x40 20 bytes struct apm_bios_info, APM_BIOS_INFO
- 0x60 16 bytes Intel SpeedStep (IST) BIOS support information
- 0x80 16 bytes hd0-disk-parameter from intvector 0x41
- 0x90 16 bytes hd1-disk-parameter from intvector 0x46
+Offset Proto Name Meaning
+/Size
- 0xa0 16 bytes System description table truncated to 16 bytes.
- ( struct sys_desc_table_struct )
- 0xb0 - 0x13f Free. Add more parameters here if you really need them.
- 0x140- 0x1be EDID_INFO Video mode setup
-
-0x1c4 unsigned long EFI system table pointer
-0x1c8 unsigned long EFI memory descriptor size
-0x1cc unsigned long EFI memory descriptor version
-0x1d0 unsigned long EFI memory descriptor map pointer
-0x1d4 unsigned long EFI memory descriptor map size
-0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
-0x1e4 unsigned long Scratch field for the kernel setup code
-0x1e8 char number of entries in E820MAP (below)
-0x1e9 unsigned char number of entries in EDDBUF (below)
-0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below)
-0x1f1 char size of setup.S, number of sectors
-0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0)
-0x1f4 unsigned short size of compressed kernel-part in the
- (b)zImage-file (in 16 byte units, rounded up)
-0x1f6 unsigned short swap_dev (unused AFAIK)
-0x1f8 unsigned short RAMDISK_FLAGS
-0x1fa unsigned short VGA-Mode (old one)
-0x1fc unsigned short ORIG_ROOT_DEV (high=Major, low=minor)
-0x1ff char AUX_DEVICE_INFO
-
-0x200 short jump to start of setup code aka "reserved" field.
-0x202 4 bytes Signature for SETUP-header, ="HdrS"
-0x206 unsigned short Version number of header format
- Current version is 0x0201...
-0x208 8 bytes (used by setup.S for communication with boot loaders,
- look there)
-0x210 char LOADER_TYPE, = 0, old one
- else it is set by the loader:
- 0xTV: T=0 for LILO
- 1 for Loadlin
- 2 for bootsect-loader
- 3 for SYSLINUX
- 4 for ETHERBOOT
- 5 for ELILO
- 7 for GRuB
- 8 for U-BOOT
- 9 for Xen
- V = version
-0x211 char loadflags:
- bit0 = 1: kernel is loaded high (bzImage)
- bit7 = 1: Heap and pointer (see below) set by boot
- loader.
-0x212 unsigned short (setup.S)
-0x214 unsigned long KERNEL_START, where the loader started the kernel
-0x218 unsigned long INITRD_START, address of loaded ramdisk image
-0x21c unsigned long INITRD_SIZE, size in bytes of ramdisk image
-0x220 4 bytes (setup.S)
-0x224 unsigned short setup.S heap end pointer
-0x226 unsigned short zero_pad
-0x228 unsigned long cmd_line_ptr
-0x22c unsigned long ramdisk_max
-0x230 16 bytes trampoline
-0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S)
-0x2d0 - 0xd00 E820MAP
-0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector
-0xd00 - 0xeeb EDDBUF (edd.S) for edd data
+000/040 ALL screen_info Text mode or frame buffer information
+ (struct screen_info)
+040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info)
+060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information
+ (struct ist_info)
+080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
+090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
+0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+140/080 ALL edid_info Video mode setup (struct edid_info)
+1C0/020 ALL efi_info EFI 32 information (struct efi_info)
+1E0/004 ALL alk_mem_k Alternative mem check, in KB
+1E4/004 ALL scratch Scratch field for the kernel setup code
+1E8/001 ALL e820_entries Number of entries in e820_map (below)
+1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
+1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
+ (below)
+290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
+2D0/A00 ALL e820_map E820 memory map table
+ (array of struct e820entry)
+D00/1EC ALL eddbuf EDD data (array of struct edd_info)
diff --git a/Documentation/ja_JP/SubmittingPatches b/Documentation/ja_JP/SubmittingPatches
new file mode 100644
index 0000000..a9dc124
--- /dev/null
+++ b/Documentation/ja_JP/SubmittingPatches
@@ -0,0 +1,556 @@
+NOTE:
+This is a version of Documentation/SubmittingPatches into Japanese.
+This document is maintained by Keiichi KII <k-keiichi@bx.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2007/10/24
+==================================
+これは、
+linux-2.6.23/Documentation/SubmittingPatches の和訳
+です。
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2007/10/17
+翻訳者： Keiichi Kii <k-keiichi at bx dot jp dot nec dot com>
+校正者： Masanari Kobayashi さん <zap03216 at nifty dot ne dot jp>
+ Matsukura さん <nbh--mats at nifty dot com>
+==================================
+
+ Linux カーネルに変更を加えるための Howto
+ 又は
+ かの Linus Torvalds の取り扱い説明書
+
+Linux カーネルに変更を加えたいと思っている個人又は会社にとって、パッ
+チの投稿に関連した仕組みに慣れていなければ、その過程は時々みなさんを
+おじけづかせることもあります。この文章はあなたの変更を大いに受け入れ
+てもらえやすくする提案を集めたものです。
+
+コードを投稿する前に、Documentation/SubmitChecklist の項目リストに目
+を通してチェックしてください。もしあなたがドライバーを投稿しようとし
+ているなら、Documentation/SubmittingDrivers にも目を通してください。
+
+--------------------------------------------
+セクション1 パッチの作り方と送り方
+--------------------------------------------
+
+1) 「 diff -up 」
+------------
+
+パッチの作成には「 diff -up 」又は「 diff -uprN 」を使ってください。
+
+Linux カーネルに対する全ての変更は diff(1) コマンドによるパッチの形式で
+生成してください。パッチを作成するときには、diff(1) コマンドに「 -u 」引
+数を指定して、unified 形式のパッチを作成することを確認してください。また、
+変更がどの C 関数で行われたのかを表示する「 -p 」引数を使ってください。
+この引数は生成した差分をずっと読みやすくしてくれます。パッチは Linux
+カーネルソースの中のサブディレクトリではなく Linux カーネルソースのルート
+ディレクトリを基準にしないといけません。
+
+1個のファイルについてのパッチを作成するためには、ほとんどの場合、
+以下の作業を行えば十分です。
+
+ SRCTREE= linux-2.6
+ MYFILE= drivers/net/mydriver.c
+
+ cd $SRCTREE
+ cp $MYFILE $MYFILE.orig
+ vi $MYFILE # make your change
+ cd ..
+ diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch
+
+複数のファイルについてのパッチを作成するためには、素の( vanilla )、す
+なわち変更を加えてない Linux カーネルを展開し、自分の Linux カーネル
+ソースとの差分を生成しないといけません。例えば、
+
+ MYSRC= /devel/linux-2.6
+
+ tar xvfz linux-2.6.12.tar.gz
+ mv linux-2.6.12 linux-2.6.12-vanilla
+ diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \
+ linux-2.6.12-vanilla $MYSRC > /tmp/patch
+
+dontdiff ファイルには Linux カーネルのビルドプロセスの過程で生成された
+ファイルの一覧がのっています。そして、それらはパッチを生成する diff(1)
+コマンドで無視されるべきです。dontdiff ファイルは 2.6.12 以後のバージョ
+ンの Linux カーネルソースツリーに含まれています。それより前のバージョン
+の Linux カーネルソースツリーに対する dontdiff ファイルは、
+<http://www.xenotime.net/linux/doc/dontdiff>から取得することができます。
+
+投稿するパッチの中に関係のない余分なファイルが含まれていないことを確
+認してください。diff(1) コマンドで生成したパッチがあなたの意図したとお
+りのものであることを確認してください。
+
+もしあなたのパッチが多くの差分を生み出すのであれば、あなたはパッチ
+を意味のあるひとまとまりごとに分けたいと思うかもしれません。
+これは他のカーネル開発者にとってレビューしやすくなるので、あなたの
+パッチを受け入れてもらうためにはとても重要なことです。これを補助でき
+る多くのスクリプトがあります。
+
+Quilt:
+http://savannah.nongnu.org/projects/quilt
+
+Andrew Morton's patch scripts:
+http://www.zip.com.au/~akpm/linux/patches/
+このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント
+ツールとして推奨されています(上のリンクを見てください)。
+
+2) パッチに対する説明
+
+パッチの中の変更点に対する技術的な詳細について説明してください。
+
+説明はできる限り具体的に。もっとも悪い説明は「ドライバー X を更新」、
+「ドライバー X に対するバグフィックス」あるいは「このパッチはサブシス
+テム X に対する更新を含んでいます。どうか取り入れてください。」などです。
+
+説明が長くなりだしたのであれば、おそらくそれはパッチを分ける必要がある
+という兆候です。次の #3 を見てください。
+
+3) パッチの分割
+
+意味のあるひとまとまりごとに変更を個々のパッチファイルに分けてください。
+
+例えば、もし1つのドライバーに対するバグフィックスとパフォーマンス強
+化の両方の変更を含んでいるのであれば、その変更を2つ以上のパッチに分
+けてください。もし変更箇所に API の更新と、その新しい API を使う新たな
+ドライバーが含まれているなら、2つのパッチに分けてください。
+
+一方で、もしあなたが多数のファイルに対して意味的に同じ1つの変更を加え
+るのであれば、その変更を1つのパッチにまとめてください。言いかえると、
+意味的に同じ1つの変更は1つのパッチの中に含まれます。
+
+あるパッチが変更を完結させるために他のパッチに依存していたとしても、
+それは問題ありません。パッチの説明の中で「このパッチはパッチ X に依存
+している」と簡単に注意書きをつけてください。
+
+もしパッチをより小さなパッチの集合に凝縮することができないなら、まずは
+15かそこらのパッチを送り、そのレビューと統合を待って下さい。
+
+4) パッチのスタイルチェック
+
+あなたのパッチが基本的な( Linux カーネルの)コーディングスタイルに違反し
+ていないかをチェックして下さい。その詳細を Documentation/CodingStyle で
+見つけることができます。コーディングスタイルの違反はレビューする人の
+時間を無駄にするだけなので、恐らくあなたのパッチは読まれることすらなく
+拒否されるでしょう。
+
+あなたはパッチを投稿する前に最低限パッチスタイルチェッカー
+( scripts/patchcheck.pl )を利用してパッチをチェックすべきです。
+もしパッチに違反がのこっているならば、それらの全てについてあなたは正当な
+理由を示せるようにしておく必要があります。
+
+5) 電子メールの宛先の選び方
+
+MAINTAINERS ファイルとソースコードに目を通してください。そして、その変
+更がメンテナのいる特定のサブシステムに加えられるものであることが分か
+れば、その人に電子メールを送ってください。
+
+もし、メンテナが載っていなかったり、メンテナからの応答がないなら、
+LKML ( linux-kernel@vger.kernel.org )へパッチを送ってください。ほとんど
+のカーネル開発者はこのメーリングリストに目を通しており、変更に対して
+コメントを得ることができます。
+
+15個より多くのパッチを同時に vger.kernel.org のメーリングリストへ送らな
+いでください!!!
+
+Linus Torvalds は Linux カーネルに入る全ての変更に対する最終的な意思決定者
+です。電子メールアドレスは torvalds@linux-foundation.org になります。彼は
+多くの電子メールを受け取っているため、できる限り彼に電子メールを送るのは
+避けるべきです。
+
+バグフィックスであったり、自明な変更であったり、話し合いをほとんど
+必要としないパッチは Linus へ電子メールを送るか CC しなければなりません。
+話し合いを必要としたり、明確なアドバンテージがないパッチは、通常まず
+は LKML へ送られるべきです。パッチが議論された後にだけ、そのパッチを
+Linus へ送るべきです。
+
+6) CC (カーボンコピー)先の選び方
+
+特に理由がないなら、LKML にも CC してください。
+
+Linus 以外のカーネル開発者は変更に気づく必要があり、その結果、彼らはそ
+の変更に対してコメントをくれたり、コードに対してレビューや提案をくれ
+るかもしれません。LKML とは Linux カーネル開発者にとって一番中心的なメー
+リングリストです。USB やフレームバッファデバイスや VFS や SCSI サブシステ
+ムなどの特定のサブシステムに関するメーリングリストもあります。あなた
+の変更に、はっきりと関連のあるメーリングリストについて知りたければ
+MAINTAINERS ファイルを参照してください。
+
+VGER.KERNEL.ORG でホスティングされているメーリングリストの一覧が下記の
+サイトに載っています。
+<http://vger.kernel.org/vger-lists.html>
+
+もし、変更がユーザランドのカーネルインタフェースに影響を与え
+るのであれば、MAN-PAGES のメンテナ( MAINTAINERS ファイルに一覧
+があります)に man ページのパッチを送ってください。少なくとも
+情報がマニュアルページの中に入ってくるように、変更が起きたという
+通知を送ってください。
+
+たとえ、メンテナが #4 で反応がなかったとしても、メンテナのコードに変更を
+加えたときには、いつもメンテナに CC するのを忘れないようにしてください。
+
+小さなパッチであれば、Adrian Bunk が管理している Trivial Patch Monkey
+(ちょっとしたパッチを集めている)<trivial@kernel.org>に CC してもいい
+です。ちょっとしたパッチとは以下のルールのどれか1つを満たしていなけ
+ればなりません。
+ ・ドキュメントのスペルミスの修正
+ ・grep(1) コマンドによる検索を困難にしているスペルの修正
+ ・コンパイル時の警告の修正(無駄な警告が散乱することは好ましくないた
+ めです)
+ ・コンパイル問題の修正(それらの修正が本当に正しい場合に限る)
+ ・実行時の問題の修正(それらの修正が本当に問題を修正している場合に限る)
+ ・廃止予定の関数やマクロを使用しているコードの除去(例 check_region )
+ ・問い合わせ先やドキュメントの修正
+ ・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で
+ あればアーキテクチャ特有のことでも他の人がコピーできます)
+ ・作者やメンテナによる修正(すなわち patch monkey の再転送モード)
+URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+
+7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ
+
+Linus や他のカーネル開発者はあなたが投稿した変更を読んで、コメントでき
+る必要があります。カーネル開発者にとって、あなたが書いたコードの特定の
+部分にコメントをするために、標準的な電子メールクライアントで変更が引用
+できることは重要です。
+
+上記の理由で、すべてのパッチは文中に含める形式の電子メールで投稿さ
+れるべきです。警告：あなたがパッチをコピー&ペーストする際には、パッ
+チを改悪するエディターの折り返し機能に注意してください。
+
+パッチを圧縮の有無に関わらず MIME 形式で添付しないでください。多くのポ
+ピュラーな電子メールクライアントは MIME 形式の添付ファイルをプレーンテ
+キストとして送信するとは限らないでしょう。そうなると、電子メールクラ
+イアントがコードに対するコメントを付けることをできなくします。また、
+MIME 形式の添付ファイルは Linus に手間を取らせることになり、その変更を
+受け入れてもらう可能性が低くなってしまいます。
+
+例外：お使いの電子メールクライアントがパッチをめちゃくちゃにするので
+あれば、誰かが MIME 形式のパッチを再送するよう求めるかもしれません。
+
+警告： Mozilla のような特定の電子メールクライアントは電子メールの
+ヘッダに以下のものを付加して送ります。
+---- message header ----
+Content-Type: text/plain; charset=us-ascii; format=flowed
+---- message header ----
+問題は、「 format=flowed 」が付いた電子メールを特定の受信側の電子メール
+クライアントがタブをスペースに置き換えるというような変更をすることです。
+したがって送られてきたパッチは壊れているように見えるでしょう。
+
+これを修正するには、mozilla の defaults/pref/mailnews.js ファイルを
+以下のように修正します。
+pref("mailnews.send_plaintext_flowed", false); // RFC 2646=======
+pref("mailnews.display.disable_format_flowed_support", true);
+
+8) 電子メールのサイズ
+
+パッチを Linus へ送るときは常に #7 の手順に従ってください。
+
+大きなパッチはメーリングリストやメンテナにとって不親切です。パッチが
+未圧縮で 40KB を超えるようであるなら、インターネット上のアクセス可能な
+サーバに保存し、保存場所を示す URL を伝えるほうが適切です。
+
+9) カーネルバージョンの明記
+
+パッチが対象とするカーネルのバージョンをパッチの概要か電子メールの
+サブジェクトに付けることが重要です。
+
+パッチが最新バージョンのカーネルに正しく適用できなければ、Linus は
+そのパッチを採用しないでしょう。
+
+10) がっかりせず再投稿
+
+パッチを投稿した後は、辛抱強く待っていてください。Linus があなたのパッ
+チを気に入って採用すれば、Linus がリリースする次のバージョンのカーネル
+の中で姿を見せるでしょう。
+
+しかし、パッチが次のバージョンのカーネルに入っていないなら、いくつもの
+理由があるのでしょう。その原因を絞り込み、間違っているものを正し、更新
+したパッチを投稿するのはあなたの仕事です。
+
+Linus があなたのパッチに対して何のコメントもなく不採用にすることは極め
+て普通のことです。それは自然な姿です。もし、Linus があなたのパッチを受
+け取っていないのであれば、以下の理由が考えられます。
+* パッチが最新バージョンの Linux カーネルにきちんと適用できなかった
+* パッチが LKML で十分に議論されていなかった
+* スタイルの問題(セクション2を参照)
+* 電子メールフォーマットの問題(このセクションを参照)
+* パッチに対する技術的な問題
+* Linus はたくさんの電子メールを受け取っているので、どさくさに紛れて見
+ 失った
+* 不愉快にさせている
+
+判断できない場合は、LKML にコメントを頼んでください。
+
+11) サブジェクトに「 PATCH 」
+
+Linus や LKML への大量の電子メールのために、サブジェクトのプレフィックスに
+「 [PATCH] 」を付けることが慣習となっています。これによって Linus や他の
+カーネル開発者がパッチであるのか、又は、他の議論に関する電子メールであるの
+かをより簡単に識別できます。
+
+12) パッチへの署名
+
+誰が何をしたのかを追いかけやすくするために (特に、パッチが何人かの
+メンテナを経て最終的に Linux カーネルに取り込まれる場合のために)、電子
+メールでやり取りされるパッチに対して「 sign-off 」という手続きを導入し
+ました。
+
+「 sign-off 」とは、パッチがあなたの書いたものであるか、あるいは、
+あなたがそのパッチをオープンソースとして提供する権利を保持している、
+という証明をパッチの説明の末尾に一行記載するというものです。
+ルールはとても単純です。以下の項目を確認して下さい。
+
+ 原作者の証明書( DCO ) 1.1
+
+ このプロジェクトに寄与するものとして、以下のことを証明する。
+
+ (a) 本寄与は私が全体又は一部作成したものであり、私がそのファイ
+ ル中に明示されたオープンソースライセンスの下で公開する権利
+ を持っている。もしくは、
+
+ (b) 本寄与は、私が知る限り、適切なオープンソースライセンスでカバ
+ ーされている既存の作品を元にしている。同時に、私はそのライセ
+ ンスの下で、私が全体又は一部作成した修正物を、ファイル中で示
+ される同一のオープンソースライセンスで(異なるライセンスの下で
+ 投稿することが許可されている場合を除いて)投稿する権利を持って
+ いる。もしくは、
+
+ (c) 本寄与は(a)、(b)、(c)を証明する第3者から私へ直接提供された
+ ものであり、私はそれに変更を加えていない。
+
+ (d) 私はこのプロジェクトと本寄与が公のものであることに理解及び同意す
+ る。同時に、関与した記録(投稿の際の全ての個人情報と sign-off を
+ 含む)が無期限に保全されることと、当該プロジェクト又は関連する
+ オープンソースライセンスに沿った形で再配布されることに理解及び
+ 同意する。
+
+もしこれに同意できるなら、以下のような1行を追加してください。
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+
+実名を使ってください。(残念ですが、偽名や匿名による寄与はできません。)
+
+人によっては sign-off の近くに追加のタグを付加しています。それらは今のところ
+無視されますが、あなたはそのタグを社内の手続きに利用したり、sign-off に特別
+な情報を示したりすることができます。
+
+13) いつ Acked-by: を使うのか
+
+「 Signed-off-by: 」タグはその署名者がパッチの開発に関わっていたことやパッチ
+の伝播パスにいたことを示しています。
+
+ある人が直接パッチの準備や作成に関わっていないけれど、その人のパッチに対す
+る承認を記録し、示したいとします。その場合、その人を示すのに Acked-by: が使
+えます。Acked-by: はパッチのチェンジログにも追加されます。
+
+パッチの影響を受けるコードのメンテナがパッチに関わっていなかったり、パッチ
+の伝播パスにいなかった時にも、メンテナは Acked-by: をしばしば利用します。
+
+Acked-by: は Signed-off-by: のように公式なタグではありません。それはメンテナが
+少なくともパッチをレビューし、同意を示しているという記録です。そのような
+ことからパッチの統合者がメンテナの「うん、良いと思うよ」という発言を
+Acked-by: へ置き換えることがあります。
+
+Acked-by: が必ずしもパッチ全体の承認を示しているわけではありません。例えば、
+あるパッチが複数のサブシステムへ影響を与えており、その中の1つのサブシステム
+のメンテナからの Acked-by: を持っているとします。その場合、Acked-by: は通常
+そのメンテナのコードに影響を与える一部分だけに対する承認を示しています。
+この点は、ご自分で判断してください。(その Acked-by: が)疑わしい場合は、
+メーリングリストアーカイブの中の大元の議論を参照すべきです。
+
+14) 標準的なパッチのフォーマット
+
+標準的なパッチのサブジェクトは以下のとおりです。
+
+ Subject: [PATCH 001/123] subsystem: summary phrase
+
+標準的なパッチの、電子メールのボディは以下の項目を含んでいます。
+
+ - パッチの作成者を明記する「 from 」行
+
+ - 空行
+
+ - 説明本体。これはこのパッチを説明するために無期限のチェンジログ
+ (変更履歴)にコピーされます。
+
+ - 上述した「 Signed-off-by: 」行。これも説明本体と同じくチェン
+ ジログ内にコピーされます。
+
+ - マーカー行は単純に「 --- 」です。
+
+ - 余計なコメントは、チェンジログには不適切です。
+
+ - 実際のパッチ(差分出力)
+
+サブジェクト行のフォーマットは、アルファベット順で電子メールをとても
+ソートしやすいものになっています。(ほとんどの電子メールクライアント
+はソートをサポートしています)パッチのサブジェクトの連番は0詰めであ
+るため、数字でのソートとアルファベットでのソートは同じ結果になります。
+
+電子メールのサブジェクト内のサブシステム表記は、パッチが適用される
+分野またはサブシステムを識別できるようにすべきです。
+
+電子メールのサブジェクトの「概要の言い回し」はそのパッチの概要を正確
+に表現しなければなりません。「概要の言い回し」をファイル名にしてはい
+けません。一連のパッチ中でそれぞれのパッチは同じ「概要の言い回し」を
+使ってはいけません(「一連のパッチ」とは順序付けられた関連のある複数の
+パッチ群です)。
+
+あなたの電子メールの「概要の言い回し」がそのパッチにとって世界で唯
+一の識別子になるように心がけてください。「概要の言い回し」は git の
+チェンジログの中へずっと伝播していきます。「概要の言い回し」は、開
+発者が後でパッチを参照するために議論の中で利用するかもしれません。
+人々はそのパッチに関連した議論を読むために「概要の言い回し」を使って
+google で検索したがるでしょう。
+
+サブジェクトの例を二つ
+
+ Subject: [patch 2/5] ext2: improve scalability of bitmap searching
+ Subject: [PATCHv2 001/207] x86: fix eflags tracking
+
+「 from 」行は電子メールのボディの一番最初の行でなければなりません。
+その形式は以下のとおりです。
+
+ From: Original Author <author@example.com>
+
+「 from 」行はチェンジログの中で、そのパッチの作成者としてクレジットされ
+ている人を特定するものです。「 from 」行がかけていると、電子メールのヘッ
+ダーの「 From: 」が、チェンジログの中でパッチの作成者を決定するために使わ
+れるでしょう。
+
+説明本体は無期限のソースのチェンジログにコミットされます。なので、説明
+本体はそのパッチに至った議論の詳細を忘れているある程度の技量を持っている人
+がその詳細を思い出すことができるものでなければなりません。
+
+「 --- 」マーカー行はパッチ処理ツールに対して、チェンジログメッセージの終端
+部分を認識させるという重要な役目を果たします。
+
+「 --- 」マーカー行の後の追加コメントの良い使用方法の1つに diffstat コマンド
+があります。diffstat コマンドとは何のファイルが変更され、1ファイル当たり何行
+追加され何行消されたかを示すものです。diffstat コマンドは特に大きなパッチに
+おいて役立ちます。その時点でだけ又はメンテナにとってのみ関係のあるコメント
+は無期限に保存されるチェンジログにとって適切ではありません。そのため、この
+ようなコメントもマーカー行の後に書かれるべきです。ファイル名はカーネルソー
+スツリーのトップディレクトリからの表記でリストされるため、横方向のスペース
+をとり過ぎないように、diffstat コマンドにオプション「 -p 1 -w 70 」を指定し
+てください(インデントを含めてちょうど80列に合うでしょう)。
+
+適切なパッチのフォーマットの詳細についてはセクション3の参考文献を参照して
+ください。
+
+------------------------------------
+セクション2 - ヒントとTIPSと小技
+------------------------------------
+
+このセクションは Linux カーネルに変更を適用することに関係のある一般的な
+「お約束」の多くを載せています。物事には例外というものがあります。しか
+し例外を適用するには、本当に妥当な理由が不可欠です。あなたは恐らくこの
+セクションを Linus のコンピュータ・サイエンス101と呼ぶでしょう。
+
+1) Documentation/CodingStyleを参照
+
+言うまでもなく、あなたのコードがこのコーディングスタイルからあまりに
+も逸脱していると、レビューやコメントなしに受け取ってもらえないかもし
+れません。
+
+唯一の特筆すべき例外は、コードをあるファイルから別のファイルに移動
+するときです。この場合、コードを移動するパッチでは、移動されるコード
+に関して移動以外の変更を一切加えるべきではありません。これにより、
+コードの移動とあなたが行ったコードの修正を明確に区別できるようにな
+ります。これは実際に何が変更されたかをレビューする際の大きな助けに
+なるとともに、ツールにコードの履歴を追跡させることも容易になります。
+
+投稿するより前にパッチのスタイルチェッカー( scripts/checkpatch.pl )で
+あなたのパッチをチェックしてください。このスタイルチェッカーは最終結
+論としてではなく、指標としてみるべきです。もし、あなたのコードが違反
+はしているが修正するより良く見えるのであれば、おそらくそのままにする
+のがベストです。
+
+スタイルチェッカーによる3段階のレポート:
+ - エラー: 間違っている可能性が高い
+ - 警告：注意してレビューする必要がある
+ - チェック：考慮する必要がある
+
+あなたはパッチに残っている全ての違反について、それがなぜ必要なのか正当な
+理由を示せるようにしておく必要があります。
+
+2) #ifdefは見苦しい
+
+ifdef が散乱したコードは、読むのもメンテナンスするのも面倒です。コードの中
+で ifdef を使わないでください。代わりに、ヘッダファイルの中に ifdef を入れて、
+条件付きで、コードの中で使われる関数を「 static inline 」関数かマクロで定義し
+てください。後はコンパイラが、何もしない箇所を最適化して取り去ってくれるで
+しょう。
+
+まずいコードの簡単な例
+
+ dev = alloc_etherdev (sizeof(struct funky_private));
+ if (!dev)
+ return -ENODEV;
+ #ifdef CONFIG_NET_FUNKINESS
+ init_funky_net(dev);
+ #endif
+
+クリーンアップしたコードの例
+
+(in header)
+ #ifndef CONFIG_NET_FUNKINESS
+ static inline void init_funky_net (struct net_device *d) {}
+ #endif
+
+(in the code itself)
+ dev = alloc_etherdev (sizeof(struct funky_private));
+ if (!dev)
+ return -ENODEV;
+ init_funky_net(dev);
+
+3) マクロより「 static inline 」を推奨
+
+「 static inline 」関数はマクロよりもずっと推奨されています。それらは、
+型安全性があり、長さにも制限が無く、フォーマットの制限もありません。
+gcc においては、マクロと同じくらい軽いです。
+
+マクロは「 static inline 」が明らかに不適切であると分かる場所(高速化パスの
+いくつかの特定のケース)や「 static inline 」関数を使うことができないような
+場所(マクロの引数の文字列連結のような)にだけ使われるべきです。
+
+「 static inline 」は「 static __inline__ 」や「 extern inline 」や
+「 extern __inline__ 」よりも適切です。
+
+4) 設計に凝りすぎるな
+
+それが有用になるかどうか分からないような不明瞭な将来を見越した設計
+をしないでください。「できる限り簡単に、そして、それ以上簡単になら
+ないような設計をしてください。」
+
+----------------------
+セクション3 参考文献
+----------------------
+
+Andrew Morton, "The perfect patch" (tpp).
+ <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+
+Jeff Garzik, "Linux kernel patch submission format".
+ <http://linux.yyz.us/patch-format.html>
+
+Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
+ <http://www.kroah.com/log/2005/03/31/>
+ <http://www.kroah.com/log/2005/07/08/>
+ <http://www.kroah.com/log/2005/10/19/>
+ <http://www.kroah.com/log/2006/01/11/>
+
+NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
+ <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
+
+Kernel Documentation/CodingStyle:
+ <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle>
+
+Linus Torvalds's mail on the canonical patch format:
+ <http://lkml.org/lkml/2005/4/7/183>
+--
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8ae5fac..33121d6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -586,11 +586,6 @@
eata= [HW,SCSI]
- ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
- Format: <int>
- 0: polling mode
- non-0: interrupt mode (default)
-
edd= [EDD]
Format: {"of[f]" | "sk[ipmbr]"}
See comment in arch/i386/boot/edd.S
diff --git a/MAINTAINERS b/MAINTAINERS
index 231bda2..6c0e44b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -216,7 +216,7 @@
M: len.brown@intel.com
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Supported
@@ -235,8 +235,8 @@
S: Supported
ACPI FAN DRIVER
-P: Konstantin A. Karasyov
-M: konstantin.a.karasyov@intel.com
+P: Len Brown
+M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
@@ -248,15 +248,15 @@
S: Supported
ACPI THERMAL DRIVER
-P: Konstantin A. Karasyov
-M: konstantin.a.karasyov@intel.com
+P: Len Brown
+M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
ACPI VIDEO DRIVER
-P: Luming Yu
-M: luming.yu@intel.com
+P: Rui Zhang
+M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
@@ -398,6 +398,12 @@
M: acme@ghostprotocols.net
S: Maintained
+APPLETOUCH TOUCHPAD DRIVER
+P: Johannes Berg
+M: johannes@sipsolutions.net
+L: linux-input@vger.kernel.org
+S: Maintained
+
ARC FRAMEBUFFER DRIVER
P: Jaya Kumar
M: jayalk@intworks.biz
@@ -1701,7 +1707,7 @@
HID CORE LAYER
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-input@atrey.karlin.mff.cuni.cz
+L: linux-input@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@@ -1927,8 +1933,7 @@
P: Dmitry Torokhov
M: dmitry.torokhov@gmail.com
M: dtor@mail.ru
-L: linux-input@atrey.karlin.mff.cuni.cz
-L: linux-joystick@atrey.karlin.mff.cuni.cz
+L: linux-input@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
@@ -3472,12 +3477,14 @@
S: Supported
SUSPEND TO RAM:
+P: Len Brown
+M: len.brown@intel.com
P: Pavel Machek
M: pavel@suse.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
-S: Maintained
+S: Supported
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
diff --git a/Makefile b/Makefile
index 8816060..188c3b6 100644
--- a/Makefile
+++ b/Makefile
@@ -168,7 +168,8 @@
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
- -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
new file mode 100644
index 0000000..7949d04
--- /dev/null
+++ b/arch/arm/configs/zylonite_defconfig
@@ -0,0 +1,736 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Tue Oct 23 13:33:20 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_ZYLONITE=y
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA3xx=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig
index 86f53f8..08d2707 100644
--- a/arch/arm/mach-ixp2000/Kconfig
+++ b/arch/arm/mach-ixp2000/Kconfig
@@ -14,7 +14,7 @@
help
Say 'Y' here if you want your kernel to support the Radisys
ENP2611 PCI network processing card. For more information on
- this card, see <file:Documentation/arm/ENP2611>.
+ this card, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2400
bool "Support Intel IXDP2400"
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 172a058..bd5184f 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -190,15 +190,15 @@
goto exit;
if (!request_mem_region
- (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, dev->kobj.name))
+ (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_free;
if (!request_mem_region
- (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, dev->kobj.name))
+ (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_release_1;
if (!request_mem_region
- (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, dev->kobj.name))
+ (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_release_2;
x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b092162..1306812 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -343,6 +343,7 @@
&h2_mcbsp1_device,
};
+#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
@@ -356,6 +357,7 @@
* - ... etc
*/
};
+#endif
static void __init h2_init_smc91x(void)
{
@@ -467,8 +469,10 @@
if (gpio_request(58, "tps65010") == 0)
gpio_direction_input(58);
+#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(1, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
+#endif
}
static void __init h2_map_io(void)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d9af436..e6e85b7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -651,7 +651,7 @@
break;
case CM_SYSCLKOUT_SEL1:
div_addr = (u32)&PRCM_CLKOUT_CTRL;
- if ((div_off == 3) || (div_off = 11))
+ if ((div_off == 3) || (div_off == 11))
mask= 0x3;
break;
case CM_CORE_SEL1:
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 5cd3cad..436f965 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 7a34231..0a0d387 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index cd9eba5..1010f77 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 39f0de8..5da7982 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2006 Marvell International Ltd.
*
- * 2007-09-02: eric miao <eric.y.miao@gmail.com>
+ * 2007-09-02: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index ec4286c..a2d45d7 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -151,6 +151,9 @@
OIER &= ~OIER_E0;
raw_local_irq_restore(irqflags);
break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ break;
}
}
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 3f18d76..743a87b 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2006 Marvell International Ltd.
*
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * 2007-09-04: eric miao <eric.miao@marvell.com>
* rewrite to align with latest kernel
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b5fbd2f..1832bc3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -5,7 +5,7 @@
* PXA3xx Development Platform (aka Zylonite)
*
* Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 63cb36b..94c7158 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -5,7 +5,7 @@
* PXA3xx Development Platform (aka Zylonite)
*
* Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 5b80b6b..194ef48 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -105,9 +105,13 @@
mrc p15, 0, r1, c1, c0, 0 @ Read control register
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
bic r2, r1, #1 << 12
+ mrs r3, cpsr @ Disable FIQs while Icache
+ orr ip, r3, #PSR_F_BIT @ is disabled
+ msr cpsr_c, ip
mcr p15, 0, r2, c1, c0, 0 @ Disable I cache
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
+ msr cpsr_c, r3 @ Restore FIQ state
mov pc, lr
/*
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7888551..9f9de3e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -295,6 +295,12 @@
help
PNAV 1.0 board Support.
+config H8606_HVSISTEMAS
+ bool "HV Sistemas H8606"
+ depends on (BF532)
+ help
+ HV Sistemas H8606 board support.
+
config GENERIC_BOARD
bool "Custom"
depends on (BF537 || BF536 \
@@ -317,7 +323,8 @@
config MEM_MT48LC16M16A2TG_75
bool
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
- || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
+ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
+ || H8606_HVSISTEMAS)
default y
config MEM_MT48LC32M8A2_75
@@ -366,7 +373,7 @@
int "Crystal Frequency in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
help
@@ -404,6 +411,7 @@
default "20" if BFIN537_BLUETECHNIX_CM
default "20" if BFIN561_BLUETECHNIX_CM
default "20" if BFIN561_EZKIT
+ default "16" if H8606_HVSISTEMAS
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
@@ -440,6 +448,7 @@
default 4 if BFIN537_BLUETECHNIX_CM
default 4 if BFIN561_BLUETECHNIX_CM
default 5 if BFIN561_EZKIT
+ default 3 if H8606_HVSISTEMAS
help
This sets the frequency of the system clock (including SDRAM or DDR).
This can be between 1 and 15
@@ -492,11 +501,13 @@
default 64 if BFIN561_EZKIT
default 128 if BFIN533_STAMP
default 64 if PNAV10
+ default 32 if H8606_HVSISTEMAS
config MEM_ADD_WIDTH
int "SDRAM Memory Address Width"
default 9 if BFIN533_EZKIT
default 9 if BFIN561_EZKIT
+ default 9 if H8606_HVSISTEMAS
default 10 if BFIN527_EZKIT
default 10 if BFIN537_STAMP
default 11 if BFIN533_STAMP
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index df974e7..1f6a93d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -244,7 +244,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 57f58d5..9e9b420 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -198,7 +198,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 306302b..f59ade9 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -199,7 +199,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 828b604..07eb63d 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -206,7 +206,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index d856988..0dd3d22 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.10
+# Sat Oct 27 02:34:07 2007
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -64,7 +65,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +117,9 @@
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
@@ -129,6 +132,7 @@
CONFIG_BF549=y
# CONFIG_BF561 is not set
CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
@@ -137,6 +141,7 @@
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_BFIN_SINGLE_CORE=y
+# CONFIG_BFIN527_EZKIT is not set
# CONFIG_BFIN533_EZKIT is not set
# CONFIG_BFIN533_STAMP is not set
# CONFIG_BFIN537_STAMP is not set
@@ -147,8 +152,23 @@
# CONFIG_BFIN561_EZKIT is not set
# CONFIG_BFIN561_TEPLA is not set
# CONFIG_PNAV10 is not set
+# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_GENERIC_BOARD is not set
CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_CNT=8
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_TIMER0=11
CONFIG_IRQ_TIMER1=11
CONFIG_IRQ_TIMER2=11
@@ -160,15 +180,6 @@
CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
#
# BF548 Specific Configuration
@@ -236,16 +247,11 @@
CONFIG_IRQ_PIXC_IN1=8
CONFIG_IRQ_PIXC_OUT=8
CONFIG_IRQ_SDH=8
-CONFIG_IRQ_CNT=8
CONFIG_IRQ_KEY=8
CONFIG_IRQ_CAN1_RX=11
CONFIG_IRQ_CAN1_TX=11
CONFIG_IRQ_SDH_MASK0=11
CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_OTPSEC=11
CONFIG_IRQ_PINT2=11
CONFIG_IRQ_PINT3=11
@@ -273,9 +279,9 @@
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533000000
+CONFIG_MAX_VCO_HZ=533333333
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -332,9 +338,10 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
+CONFIG_DMA_UNCACHED_2M=y
+# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
#
@@ -353,7 +360,7 @@
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
# CONFIG_C_AMBEN is not set
@@ -722,7 +729,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
+CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
@@ -731,18 +738,39 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_BFIN=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -764,9 +792,9 @@
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -958,17 +986,92 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_BFIN_7171 is not set
+# CONFIG_FB_BFIN_7393 is not set
+CONFIG_FB_BF54X_LQ043=m
+# CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_LOGO is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_BF5XX_SOC_AC97=y
+CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_AD1980=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
#
# HID Devices
#
-CONFIG_HID=y
+CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
#
@@ -1101,8 +1204,13 @@
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1123,15 +1231,22 @@
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
@@ -1183,10 +1298,33 @@
#
# Network File Systems
#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1195,13 +1333,68 @@
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 85e647f..277d72d 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -243,7 +243,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 15e36aa..3d403e0 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -204,7 +204,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65c5ba4..65f4e67 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -54,9 +54,11 @@
[sp + PT_IPEND] = r0;
/* do a 'fake' RTI by jumping to [RETI]
* to avoid clearing supervisor mode in child
- */
+ */
+ r0 = [sp + PT_PC];
+ [sp + PT_P0] = r0;
+
RESTORE_ALL_SYS
- p0 = reti;
jump (p0);
ENDPROC(_ret_from_fork)
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index d8b1ebc..9026269 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -129,4 +129,18 @@
rts;
ENDPROC (_atomic_ior32)
+.align 16
+ /*
+ * safe_user_instruction
+ * Four NOPS are enough to allow the pipeline to speculativily load
+ * execute anything it wants. After that, things have gone bad, and
+ * we are stuck - so panic. Since we might be in user space, we can't
+ * call panic, so just cause a unhandled exception, this should cause
+ * a dump of the trace buffer so we can tell were we are, and a reboot
+ */
+ENTRY(_safe_user_instruction)
+ NOP; NOP; NOP; NOP;
+ EXCPT 0x4;
+ENDPROC(_safe_user_instruction)
+
ENTRY(_fixed_code_end)
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index cb7ba9b..5cf4bdb 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -20,8 +20,7 @@
#else
# define tassert(expr) \
if (!(expr)) \
- printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", \
- __FILE__, __func__, __LINE__);
+ printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
#endif
#define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
@@ -70,7 +69,7 @@
#endif
};
-static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] =
+static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] =
{
TIMER_STATUS_TRUN0,
TIMER_STATUS_TRUN1,
@@ -90,7 +89,27 @@
#endif
};
-static uint32_t const irq_mask[MAX_BLACKFIN_GPTIMERS] =
+static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] =
+{
+ TIMER_STATUS_TOVF0,
+ TIMER_STATUS_TOVF1,
+ TIMER_STATUS_TOVF2,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+ TIMER_STATUS_TOVF3,
+ TIMER_STATUS_TOVF4,
+ TIMER_STATUS_TOVF5,
+ TIMER_STATUS_TOVF6,
+ TIMER_STATUS_TOVF7,
+#endif
+#if (MAX_BLACKFIN_GPTIMERS > 8)
+ TIMER_STATUS_TOVF8,
+ TIMER_STATUS_TOVF9,
+ TIMER_STATUS_TOVF10,
+ TIMER_STATUS_TOVF11,
+#endif
+};
+
+static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] =
{
TIMER_STATUS_TIMIL0,
TIMER_STATUS_TIMIL1,
@@ -165,17 +184,31 @@
uint16_t get_gptimer_intr(int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
- return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & irq_mask[timer_id]) ? 1 : 0;
+ return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
}
EXPORT_SYMBOL(get_gptimer_intr);
void clear_gptimer_intr(int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
- group_regs[BFIN_TIMER_OCTET(timer_id)]->status = irq_mask[timer_id];
+ group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id];
}
EXPORT_SYMBOL(clear_gptimer_intr);
+uint16_t get_gptimer_over(int timer_id)
+{
+ tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+ return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
+}
+EXPORT_SYMBOL(get_gptimer_over);
+
+void clear_gptimer_over(int timer_id)
+{
+ tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+ group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id];
+}
+EXPORT_SYMBOL(clear_gptimer_over);
+
void set_gptimer_config(int timer_id, uint16_t config)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
@@ -214,7 +247,7 @@
}
for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
if (mask & (1 << i))
- group_regs[BFIN_TIMER_OCTET(i)]->status |= dis_mask[i];
+ group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
SSYNC();
}
EXPORT_SYMBOL(disable_gptimers);
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f1b059e..934234f 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -316,6 +316,15 @@
init_leds();
+ _bfin_swrst = bfin_read_SWRST();
+
+ if (_bfin_swrst & RESET_DOUBLE)
+ printk(KERN_INFO "Recovering from Double Fault event\n");
+ else if (_bfin_swrst & RESET_WDOG)
+ printk(KERN_INFO "Recovering from Watchdog event\n");
+ else if (_bfin_swrst & RESET_SOFTWARE)
+ printk(KERN_NOTICE "Reset caused by Software reset\n");
+
printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
@@ -402,8 +411,6 @@
if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n");
- _bfin_swrst = bfin_read_SWRST();
-
/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
memcpy((void *)FIXED_CODE_START, &fixed_code_start,
@@ -424,6 +431,8 @@
!= ATOMIC_AND32 - FIXED_CODE_START);
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START);
+ BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
+ != SAFE_USER_INSTRUCTION - FIXED_CODE_START);
init_exception_vectors();
bf53x_cache_init();
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index afd044e..cfa05436 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -37,10 +37,24 @@
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
+#include <asm/fixed_code.h>
#ifdef CONFIG_KGDB
# include <linux/debugger.h>
# include <linux/kgdb.h>
+
+# define CHK_DEBUGGER_TRAP() \
+ do { \
+ CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
+ } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() \
+ do { \
+ if (kgdb_connected) \
+ CHK_DEBUGGER_TRAP(); \
+ } while (0)
+#else
+# define CHK_DEBUGGER_TRAP() do { } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
#endif
/* Initiate the event table handler */
@@ -53,13 +67,13 @@
int kstack_depth_to_print = 48;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-static int printk_address(unsigned long address)
+static void decode_address(char *buf, unsigned long address)
{
struct vm_list_struct *vml;
struct task_struct *p;
struct mm_struct *mm;
- unsigned long offset;
+ unsigned long flags, offset;
+ unsigned int in_exception = bfin_read_IPEND() & 0x10;
#ifdef CONFIG_KALLSYMS
unsigned long symsize;
@@ -75,20 +89,33 @@
/* yeah! kernel space! */
if (!modname)
modname = delim = "";
- return printk("<0x%p> { %s%s%s%s + 0x%lx }",
+ sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }",
(void *)address, delim, modname, delim, symname,
(unsigned long)offset);
+ return;
}
#endif
+ /* Problem in fixed code section? */
+ if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+ sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address);
+ return;
+ }
+
+ /* Problem somewhere before the kernel start address */
+ if (address < CONFIG_BOOT_LOAD) {
+ sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address);
+ return;
+ }
+
/* looks like we're off in user-land, so let's walk all the
* mappings of all our processes and see if we can't be a whee
* bit more specific
*/
- write_lock_irq(&tasklist_lock);
+ write_lock_irqsave(&tasklist_lock, flags);
for_each_process(p) {
- mm = get_task_mm(p);
+ mm = (in_exception ? p->mm : get_task_mm(p));
if (!mm)
continue;
@@ -117,25 +144,30 @@
else
offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
- write_unlock_irq(&tasklist_lock);
- mmput(mm);
- return printk("<0x%p> [ %s + 0x%lx ]",
- (void *)address, name, offset);
+ sprintf(buf, "<0x%p> [ %s + 0x%lx ]",
+ (void *)address, name, offset);
+ if (!in_exception)
+ mmput(mm);
+ goto done;
}
vml = vml->next;
}
- mmput(mm);
+ if (!in_exception)
+ mmput(mm);
}
- write_unlock_irq(&tasklist_lock);
/* we were unable to find this address anywhere */
- return printk("[<0x%p>]", (void *)address);
+ sprintf(buf, "[<0x%p>]", (void *)address);
+
+done:
+ write_unlock_irqrestore(&tasklist_lock, flags);
}
-#endif
asmlinkage void double_fault_c(struct pt_regs *fp)
{
+ console_verbose();
+ oops_in_progress = 1;
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
dump_bfin_regs(fp, (void *)fp->retx);
panic("Double Fault - unrecoverable event\n");
@@ -151,23 +183,30 @@
siginfo_t info;
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
-#ifdef CONFIG_KGDB
-# define CHK_DEBUGGER_TRAP() \
- do { \
- CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
- } while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() \
- do { \
- if (kgdb_connected) \
- CHK_DEBUGGER_TRAP(); \
- } while (0)
-#else
-# define CHK_DEBUGGER_TRAP() do { } while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
-#endif
-
trace_buffer_save(j);
+ /* Important - be very careful dereferncing pointers - will lead to
+ * double faults if the stack has become corrupt
+ */
+
+ /* If the fault was caused by a kernel thread, or interrupt handler
+ * we will kernel panic, so the system reboots.
+ * If KGDB is enabled, don't set this for kernel breakpoints
+ */
+ if ((bfin_read_IPEND() & 0xFFC0)
+#ifdef CONFIG_KGDB
+ && trapnr != VEC_EXCPT02
+#endif
+ ){
+ console_verbose();
+ oops_in_progress = 1;
+ } else if (current) {
+ if (current->mm == NULL) {
+ console_verbose();
+ oops_in_progress = 1;
+ }
+ }
+
/* trap_c() will be called for exceptions. During exceptions
* processing, the pc value should be set with retx value.
* With this change we can cleanup some code in signal.c- TODO
@@ -211,7 +250,7 @@
case VEC_EXCPT03:
info.si_code = SEGV_STACKFLOW;
sig = SIGSEGV;
- printk(KERN_EMERG EXC_0x03);
+ printk(KERN_NOTICE EXC_0x03);
CHK_DEBUGGER_TRAP();
break;
/* 0x04 - User Defined, Caught by default */
@@ -240,7 +279,7 @@
case VEC_OVFLOW:
info.si_code = TRAP_TRACEFLOW;
sig = SIGTRAP;
- printk(KERN_EMERG EXC_0x11);
+ printk(KERN_NOTICE EXC_0x11);
CHK_DEBUGGER_TRAP();
break;
/* 0x12 - Reserved, Caught by default */
@@ -262,14 +301,14 @@
case VEC_UNDEF_I:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x21);
+ printk(KERN_NOTICE EXC_0x21);
CHK_DEBUGGER_TRAP();
break;
/* 0x22 - Illegal Instruction Combination, handled here */
case VEC_ILGAL_I:
info.si_code = ILL_ILLPARAOP;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x22);
+ printk(KERN_NOTICE EXC_0x22);
CHK_DEBUGGER_TRAP();
break;
/* 0x23 - Data CPLB Protection Violation,
@@ -277,21 +316,21 @@
case VEC_CPLB_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x23);
+ printk(KERN_NOTICE EXC_0x23);
CHK_DEBUGGER_TRAP();
break;
/* 0x24 - Data access misaligned, handled here */
case VEC_MISALI_D:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x24);
+ printk(KERN_NOTICE EXC_0x24);
CHK_DEBUGGER_TRAP();
break;
/* 0x25 - Unrecoverable Event, handled here */
case VEC_UNCOV:
info.si_code = ILL_ILLEXCPT;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x25);
+ printk(KERN_NOTICE EXC_0x25);
CHK_DEBUGGER_TRAP();
break;
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -299,7 +338,7 @@
case VEC_CPLB_M:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x26);
+ printk(KERN_NOTICE EXC_0x26);
CHK_DEBUGGER_TRAP();
break;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
@@ -307,11 +346,10 @@
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_EMERG "\n"
- KERN_EMERG "NULL pointer access (probably)\n");
+ printk(KERN_NOTICE "NULL pointer access (probably)\n");
#else
sig = SIGILL;
- printk(KERN_EMERG EXC_0x27);
+ printk(KERN_NOTICE EXC_0x27);
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -331,7 +369,7 @@
case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
info.si_code = BUS_OPFETCH;
sig = SIGBUS;
- printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n");
+ printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
CHK_DEBUGGER_TRAP();
break;
#else
@@ -341,7 +379,7 @@
case VEC_MISALI_I:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x2A);
+ printk(KERN_NOTICE EXC_0x2A);
CHK_DEBUGGER_TRAP();
break;
/* 0x2B - Instruction CPLB protection Violation,
@@ -349,14 +387,14 @@
case VEC_CPLB_I_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2B);
+ printk(KERN_NOTICE EXC_0x2B);
CHK_DEBUGGER_TRAP();
break;
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
case VEC_CPLB_I_M:
info.si_code = ILL_CPLB_MISS;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x2C);
+ printk(KERN_NOTICE EXC_0x2C);
CHK_DEBUGGER_TRAP();
break;
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
@@ -364,10 +402,10 @@
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
+ printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
#else
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2D);
+ printk(KERN_NOTICE EXC_0x2D);
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -375,7 +413,7 @@
case VEC_ILL_RES:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2E);
+ printk(KERN_NOTICE EXC_0x2E);
CHK_DEBUGGER_TRAP();
break;
/* 0x2F - Reserved, Caught by default */
@@ -404,38 +442,40 @@
break;
}
- if (sig != 0 && sig != SIGTRAP) {
+ BUG_ON(sig == 0);
+
+ if (sig != SIGTRAP) {
unsigned long stack;
dump_bfin_regs(fp, (void *)fp->retx);
- dump_bfin_trace_buffer();
+
+ /* Print out the trace buffer if it makes sense */
+#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+ if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
+ printk(KERN_NOTICE "No trace since you do not have "
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
+ KERN_NOTICE "\n");
+ else
+#endif
+ dump_bfin_trace_buffer();
show_stack(current, &stack);
- if (current->mm == NULL)
+ if (oops_in_progress) {
+#ifndef CONFIG_ACCESS_CHECK
+ printk(KERN_EMERG "Hey - dork - please turn on "
+ "CONFIG_ACCESS_CHECK\n");
+#endif
panic("Kernel exception");
+ }
+
+ /* Ensure that bad return addresses don't end up in an infinite
+ * loop, due to speculative loads/reads
+ */
+ fp->pc = SAFE_USER_INSTRUCTION;
}
info.si_signo = sig;
info.si_errno = 0;
info.si_addr = (void *)fp->pc;
force_sig_info(sig, &info, current);
- /* if the address that we are about to return to is not valid, set it
- * to a valid address, if we have a current application or panic
- */
- if (!(fp->pc <= physical_mem_end
-#if L1_CODE_LENGTH != 0
- || (fp->pc >= L1_CODE_START &&
- fp->pc <= (L1_CODE_START + L1_CODE_LENGTH))
-#endif
- )) {
- if (current->mm) {
- fp->pc = current->mm->start_code;
- } else {
- printk(KERN_EMERG
- "I can't return to memory that doesn't exist"
- " - bad things happen\n");
- panic("Help - I've fallen and can't get up\n");
- }
- }
-
trace_buffer_restore(j);
return;
}
@@ -448,21 +488,21 @@
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
+ char buf[150];
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
trace_buffer_save(tflags);
- printk(KERN_EMERG "Hardware Trace:\n");
+ printk(KERN_NOTICE "Hardware Trace:\n");
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
- printk(KERN_EMERG "%4i Target : ", i);
- printk_address((unsigned long)bfin_read_TBUF());
- printk("\n" KERN_EMERG " Source : ");
- printk_address((unsigned long)bfin_read_TBUF());
- printk("\n");
+ decode_address(buf, (unsigned long)bfin_read_TBUF());
+ printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
+ decode_address(buf, (unsigned long)bfin_read_TBUF());
+ printk(KERN_NOTICE " Source : %s\n", buf);
}
}
@@ -474,17 +514,16 @@
j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
while (j) {
- printk(KERN_EMERG "%4i Target : ", i);
- printk_address(software_trace_buff[index]);
+ decode_address(buf, software_trace_buff[index]);
+ printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
index -= 1;
if (index < 0 )
index = EXPAND_LEN;
- printk("\n" KERN_EMERG " Source : ");
- printk_address(software_trace_buff[index]);
+ decode_address(buf, software_trace_buff[index]);
+ printk(KERN_NOTICE " Source : %s\n", buf);
index -= 1;
if (index < 0)
index = EXPAND_LEN;
- printk("\n");
j--;
i++;
}
@@ -499,10 +538,7 @@
{
unsigned long addr;
- printk("\nCall Trace:");
-#ifdef CONFIG_KALLSYMS
- printk("\n");
-#endif
+ printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
while (!kstack_end(sp)) {
addr = *sp++;
@@ -518,7 +554,7 @@
print_ip_sym(addr);
}
- printk("\n");
+ printk(KERN_NOTICE "\n");
}
void show_stack(struct task_struct *task, unsigned long *stack)
@@ -540,14 +576,15 @@
addr = (unsigned long)stack;
endstack = (unsigned long *)PAGE_ALIGN(addr);
- printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
+ printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
for (i = 0; i < kstack_depth_to_print; i++) {
if (stack + 1 > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
+ printk("\n" KERN_NOTICE " ");
printk(" %08lx", *stack++);
}
+ printk("\n");
show_trace(task, stack);
}
@@ -568,33 +605,34 @@
void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
{
- if (current->pid) {
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n"
- KERN_EMERG "\n");
- printk(KERN_EMERG "COMM=%s PID=%d\n",
- current->comm, current->pid);
+ char buf [150];
+
+ if (!oops_in_progress) {
+ if (current->pid && current->mm) {
+ printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n");
+ printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ current->comm, current->pid);
+
+ printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
+ KERN_NOTICE "\n",
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
+ } else {
+ printk (KERN_NOTICE "\n" KERN_NOTICE
+ "No Valid pid - Either things are really messed up,"
+ " or you are in the kernel\n");
+ }
} else {
- printk
- (KERN_EMERG "\n" KERN_EMERG
- "No Valid pid - Either things are really messed up,"
- " or you are in the kernel\n");
+ printk(KERN_NOTICE "Kernel or interrupt exception\n");
}
- if (current->mm) {
- printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_EMERG "\n",
- (void *)current->mm->start_code,
- (void *)current->mm->end_code,
- (void *)current->mm->start_data,
- (void *)current->mm->end_data,
- (void *)current->mm->end_data,
- (void *)current->mm->brk,
- (void *)current->mm->start_stack);
- }
-
- printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr);
- if (retaddr != 0 && retaddr <= (void *)physical_mem_end
+ if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
/* FIXME: Copy the code out of L1 Instruction SRAM through dma
memcpy. */
@@ -604,18 +642,20 @@
) {
int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
unsigned short x = 0;
+ printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr);
for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
if (!(i & 0xF))
- printk("\n" KERN_EMERG "0x%08x: ", i);
+ printk("\n" KERN_NOTICE "0x%08x: ", i);
if (get_user(x, (unsigned short *)i))
break;
#ifndef CONFIG_DEBUG_HWERR
/* If one of the last few instructions was a STI
* it is likely that the error occured awhile ago
- * and we just noticed
+ * and we just noticed. This only happens in kernel
+ * context, which should mean an oops is happening
*/
- if (x >= 0x0040 && x <= 0x0047 && i <= 0)
+ if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0)
panic("\n\nWARNING : You should reconfigure"
" the kernel to turn on\n"
" 'Hardware error interrupt"
@@ -628,56 +668,60 @@
else
printk(" %04x ", x);
}
- printk("\n" KERN_EMERG "\n");
+ printk("\n");
} else
- printk(KERN_EMERG
+ printk("\n" KERN_NOTICE
"Cannot look at the [PC] for it is"
- "in unreadable L1 SRAM - sorry\n");
+ " in unreadable memory - sorry\n");
+ printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
+ printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
- printk(KERN_EMERG
- "RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n",
- fp->rete, fp->retn, fp->retx, fp->rets);
- printk(KERN_EMERG "IPEND: %04lx SYSCFG: %04lx\n",
- fp->ipend, fp->syscfg);
- printk(KERN_EMERG "SEQSTAT: %08lx SP: %08lx\n",
- (long)fp->seqstat, (long)fp);
- printk(KERN_EMERG "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
- fp->r0, fp->r1, fp->r2, fp->r3);
- printk(KERN_EMERG "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
- fp->r4, fp->r5, fp->r6, fp->r7);
- printk(KERN_EMERG "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
- fp->p0, fp->p1, fp->p2, fp->p3);
- printk(KERN_EMERG
- "P4: %08lx P5: %08lx FP: %08lx\n",
- fp->p4, fp->p5, fp->fp);
- printk(KERN_EMERG
- "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
- fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+ decode_address(buf, fp->rete);
+ printk(KERN_NOTICE " RETE: %s\n", buf);
+ decode_address(buf, fp->retn);
+ printk(KERN_NOTICE " RETN: %s\n", buf);
+ decode_address(buf, fp->retx);
+ printk(KERN_NOTICE " RETX: %s\n", buf);
+ decode_address(buf, fp->rets);
+ printk(KERN_NOTICE " RETS: %s\n", buf);
- printk(KERN_EMERG "LB0: %08lx LT0: %08lx LC0: %08lx\n",
- fp->lb0, fp->lt0, fp->lc0);
- printk(KERN_EMERG "LB1: %08lx LT1: %08lx LC1: %08lx\n",
- fp->lb1, fp->lt1, fp->lc1);
- printk(KERN_EMERG "B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n",
- fp->b0, fp->l0, fp->m0, fp->i0);
- printk(KERN_EMERG "B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n",
- fp->b1, fp->l1, fp->m1, fp->i1);
- printk(KERN_EMERG "B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n",
- fp->b2, fp->l2, fp->m2, fp->i2);
- printk(KERN_EMERG "B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n",
- fp->b3, fp->l3, fp->m3, fp->i3);
-
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08lx ASTAT: %08lx\n",
- rdusp(), fp->astat);
if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n",
- (void *)bfin_read_DCPLB_FAULT_ADDR());
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n",
- (void *)bfin_read_ICPLB_FAULT_ADDR());
+ decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
+ decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
+ printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- printk("\n\n");
+ printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
+ fp->r0, fp->r1, fp->r2, fp->r3);
+ printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
+ fp->p0, fp->p1, fp->p2, fp->p3);
+ printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
+ fp->p4, fp->p5, fp->fp, (long)fp);
+ printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
+ fp->lb0, fp->lt0, fp->lc0);
+ printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
+ fp->lb1, fp->lt1, fp->lc1);
+ printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
+ fp->b0, fp->l0, fp->m0, fp->i0);
+ printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
+ fp->b1, fp->l1, fp->m1, fp->i1);
+ printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
+ fp->b2, fp->l2, fp->m2, fp->i2);
+ printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
+ fp->b3, fp->l3, fp->m3, fp->i3);
+ printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+ printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
+ rdusp(), fp->astat);
+
+ printk(KERN_NOTICE "\n");
}
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
@@ -752,6 +796,8 @@
break;
}
+ oops_in_progress = 1;
+
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
dump_bfin_regs(fp, (void *)fp->retx);
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index eec4367..9b75bc8 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -172,9 +172,14 @@
__ebss_b_l1 = .;
}
- ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ /* Force trailing alignment of our init section so that when we
+ * free our init memory, we don't leave behind a partial page.
+ */
+ . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ . = ALIGN(PAGE_SIZE);
+ ___init_end = .;
- .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
+ .bss :
{
. = ALIGN(4);
___bss_start = .;
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3e884f3..bf1bedc 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -41,9 +41,11 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
+#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/nand.h>
#include <linux/spi/ad7877.h>
/*
@@ -102,6 +104,53 @@
arch_initcall(bfin_isp1761_init);
#endif
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0,
+ .size = 4 * SIZE_1M,
+ },
+ {
+ .name = "File System",
+ .offset = 4 * SIZE_1M,
+ .size = (256 - 4) * SIZE_1M,
+ },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+ {
+ .start = NFC_CTL,
+ .end = NFC_DATA_RD + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf5xx_nand_device = {
+ .name = "bf5xx-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+ .resource = bf5xx_nand_resources,
+ .dev = {
+ .platform_data = &bf5xx_nand_platform,
+ },
+};
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
@@ -650,6 +699,10 @@
#endif
static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+ &bf5xx_nand_device,
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
new file mode 100644
index 0000000..b941550
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -0,0 +1,345 @@
+/*
+ * File: arch/blackfin/mach-bf533/H8606.c
+ * Based on: arch/blackfin/mach-bf533/stamp.c
+ * Author: Javier Herrero <jherrero@hvsistemas.es>
+ *
+ * Created: 2007
+ * Description: Board Info File for the HV Sistemas H8606 board
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc
+ * Copyright 2007 HV Sistemas S.L.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "HV Sistemas H8606";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+* Driver needs to know address, irq and flag pin.
+ */
+ #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x20300000,
+ .end = 0x20300000 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .id = 0,
+ .name = "dm9000",
+ .resource = dm9000_resources,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ }, {
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00060000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "kernel",
+ .size = 0x100000,
+ .offset = 0x60000
+ }, {
+ .name = "file system",
+ .size = 0x6a0000,
+ .offset = 0x00160000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .ctl_reg = 0x1000,
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .ctl_reg = 0x1000,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x1c04,
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ /* this value is the baudrate divisor */
+ .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 16,
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 4,
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
+ },
+
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 4,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
+ },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+ &dm9000_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init H8606_init(void)
+{
+ printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(H8606_init);
\ No newline at end of file
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 12a631a..2452b45 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
+obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1c5a86a..a863522 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -46,7 +46,7 @@
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader",
@@ -76,12 +76,15 @@
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
};
+#endif
/* SPI ADC chip */
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
};
+#endif
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -90,7 +93,15 @@
};
#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -100,7 +111,11 @@
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
- }, {
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
@@ -108,6 +123,8 @@
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
},
+#endif
+
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
{
.modalias = "ad1836-spi",
@@ -117,6 +134,27 @@
.controller_data = &ad1836_spi_chip_info,
},
#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
};
/* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index f84be4e..62ffa50 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -218,7 +218,7 @@
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
@@ -227,7 +227,7 @@
},
{
.modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 52e2320..2915931 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -281,8 +281,8 @@
.end = 0x20200000 + 0x100,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
+ .start = IRQ_PH14,
+ .end = IRQ_PH14,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index cc41f6c..5f7b91f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -450,7 +450,7 @@
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
@@ -459,7 +459,7 @@
},
{
.modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
@@ -612,7 +612,7 @@
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
};
static struct resource bfin_pata_resources[] = {
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index e3ad580..1b13fa4 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -917,7 +917,7 @@
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
.long _ex_replaceable /* 0x02 - User Defined */
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
- .long _ex_replaceable /* 0x04 - User Defined */
+ .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
.long _ex_replaceable /* 0x05 - User Defined */
.long _ex_replaceable /* 0x06 - User Defined */
.long _ex_replaceable /* 0x07 - User Defined */
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index e2e9f57..ff6a871 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration"
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 75fd90d..7f6b237 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6
-# Tue Sep 18 11:24:01 2007
+# Linux kernel version: 2.6.23
+# Thu Oct 18 16:03:40 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -28,6 +28,8 @@
CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
@@ -48,7 +50,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -69,6 +70,7 @@
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -93,6 +95,7 @@
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
@@ -113,10 +116,10 @@
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-# CONFIG_PGTABLE_3 is not set
-CONFIG_PGTABLE_4=y
+# CONFIG_IA64_PAGE_SIZE_16KB is not set
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
@@ -131,6 +134,7 @@
CONFIG_NR_CPUS=1024
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
@@ -144,6 +148,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -171,6 +176,7 @@
CONFIG_IA64_MC_ERR_INJECT=y
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
@@ -220,7 +226,6 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -231,10 +236,6 @@
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_SGI=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -271,6 +272,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -342,6 +344,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -402,7 +405,12 @@
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
@@ -410,8 +418,6 @@
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -439,7 +445,6 @@
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -482,6 +487,7 @@
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -492,6 +498,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -532,6 +539,7 @@
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -556,6 +564,7 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -588,10 +597,6 @@
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
@@ -613,13 +618,16 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -638,12 +646,15 @@
CONFIG_CHELSIO_T1_1G=y
# CONFIG_CHELSIO_T1_NAPI is not set
CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -669,6 +680,7 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
@@ -690,7 +702,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -714,6 +725,7 @@
# Character devices
#
CONFIG_VT=y
+# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -760,9 +772,6 @@
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
@@ -782,6 +791,12 @@
# CONFIG_HWMON is not set
#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
@@ -796,15 +811,18 @@
#
# Graphics support
#
+CONFIG_AGP=y
+CONFIG_AGP_SGI_TIOCA=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
#
# Console display driver support
@@ -820,6 +838,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -951,19 +970,6 @@
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -1005,6 +1011,8 @@
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
@@ -1043,7 +1051,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1062,10 +1069,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1082,6 +1086,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1118,10 +1123,6 @@
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1162,10 +1163,6 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
@@ -1223,6 +1220,7 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
@@ -1238,6 +1236,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1262,6 +1261,7 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1275,9 +1275,11 @@
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 3f7ea13..6216eba 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1231,7 +1231,7 @@
#ifdef CONFIG_PROC_VMCORE
/* locate the size find a the descriptor at a certain address */
-unsigned long
+unsigned long __init
vmcore_find_descriptor_size (unsigned long address)
{
void *efi_map_start, *efi_map_end, *p;
diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S
index 44817d97..454d7a7 100644
--- a/arch/ia64/kernel/gate.lds.S
+++ b/arch/ia64/kernel/gate.lds.S
@@ -20,6 +20,8 @@
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
+ .note : { *(.note*) } :readable :note
+
.dynamic : { *(.dynamic) } :readable :dynamic
/*
@@ -83,6 +85,7 @@
epc PT_LOAD FILEHDR PHDRS FLAGS(1); /* PF_X */
#endif
dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ note PT_NOTE FLAGS(4); /* PF_R */
unwind PT_IA_64_UNWIND;
}
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 2fdbd5c..e86d029 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -109,7 +109,7 @@
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &ia64_msi_chip, handle_edge_irq);
- return irq;
+ return 0;
}
void ia64_teardown_msi_irq(unsigned int irq)
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index ae6c3c0..2b3751e 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -417,34 +417,6 @@
#endif
}
-#ifdef CONFIG_SMP
-static void __init
-check_for_logical_procs (void)
-{
- pal_logical_to_physical_t info;
- s64 status;
-
- status = ia64_pal_logical_to_phys(0, &info);
- if (status == -1) {
- printk(KERN_INFO "No logical to physical processor mapping "
- "available\n");
- return;
- }
- if (status) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
- status);
- return;
- }
- /*
- * Total number of siblings that BSP has. Though not all of them
- * may have booted successfully. The correct number of siblings
- * booted is in info.overview_num_log.
- */
- smp_num_siblings = info.overview_tpc;
- smp_num_cpucores = info.overview_cpp;
-}
-#endif
-
static __initdata int nomca;
static __init int setup_nomca(char *s)
{
@@ -540,15 +512,6 @@
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
- check_for_logical_procs();
- if (smp_num_cpucores > 1)
- printk(KERN_INFO
- "cpu package is Multi-Core capable: number of cores=%d\n",
- smp_num_cpucores);
- if (smp_num_siblings > 1)
- printk(KERN_INFO
- "cpu package is Multi-Threading capable: number of siblings=%d\n",
- smp_num_siblings);
#endif
cpu_init(); /* initialize the bootstrap CPU */
@@ -661,12 +624,13 @@
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
+ if (c->socket_id != -1)
+ seq_printf(m, "physical id: %u\n", c->socket_id);
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
- "physical id: %u\n"
- "core id : %u\n"
- "thread id : %u\n",
- c->socket_id, c->core_id, c->thread_id);
+ "core id : %u\n"
+ "thread id : %u\n",
+ c->core_id, c->thread_id);
#endif
seq_printf(m,"\n");
@@ -778,6 +742,9 @@
c->socket_id = -1;
identify_siblings(c);
+
+ if (c->threads_per_core > smp_num_siblings)
+ smp_num_siblings = c->threads_per_core;
#endif
c->ppn = cpuid.field.ppn;
c->number = cpuid.field.number;
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index c57dbce..f0fc4d8 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -142,7 +142,6 @@
EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
int smp_num_siblings = 1;
-int smp_num_cpucores = 1;
/* which logical CPU number maps to which CPU (physical APIC ID) */
volatile int ia64_cpu_to_sapicid[NR_CPUS];
@@ -886,13 +885,17 @@
u16 pltid;
pal_logical_to_physical_t info;
- if (smp_num_cpucores == 1 && smp_num_siblings == 1)
- return;
-
if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
- status);
- return;
+ if (status != PAL_STATUS_UNIMPLEMENTED) {
+ printk(KERN_ERR
+ "ia64_pal_logical_to_phys failed with %ld\n",
+ status);
+ return;
+ }
+
+ info.overview_ppid = 0;
+ info.overview_cpp = 1;
+ info.overview_tpc = 1;
}
if ((status = ia64_sal_physical_id_info(&pltid)) != PAL_STATUS_SUCCESS) {
printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status);
@@ -900,6 +903,10 @@
}
c->socket_id = (pltid << 8) | info.overview_ppid;
+
+ if (info.overview_cpp == 1 && info.overview_tpc == 1)
+ return;
+
c->cores_per_socket = info.overview_cpp;
c->threads_per_core = info.overview_tpc;
c->num_log = info.overview_num_log;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index c6c19bf..25aef62 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -472,7 +472,7 @@
unsigned long zone;
};
-static int
+static int __meminit
virtual_memmap_init (u64 start, u64 end, void *arg)
{
struct memmap_init_callback_data *args;
@@ -503,7 +503,7 @@
return 0;
}
-void
+void __meminit
memmap_init (unsigned long size, int nid, unsigned long zone,
unsigned long start_pfn)
{
diff --git a/arch/ia64/scripts/check-segrel.lds b/arch/ia64/scripts/check-segrel.lds
index 1c2f13e..85a0d54 100644
--- a/arch/ia64/scripts/check-segrel.lds
+++ b/arch/ia64/scripts/check-segrel.lds
@@ -1,6 +1,7 @@
SECTIONS {
. = SIZEOF_HEADERS;
.rodata : { *(.rodata) } :ro
+ .note : { *(.note*) }
. = 0xa0000;
.data : { *(.data) } :dat
/DISCARD/ : { *(*) }
diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c
index 3db62f2..868c9aa 100644
--- a/arch/ia64/sn/kernel/mca.c
+++ b/arch/ia64/sn/kernel/mca.c
@@ -98,6 +98,7 @@
while (*sn_oemdata_size > sn_oemdata_bufsize) {
u8 *newbuf = vmalloc(*sn_oemdata_size);
if (!newbuf) {
+ mutex_unlock(&sn_oemdata_mutex);
printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
__FUNCTION__);
return 1;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 97da953..2c7d6c24 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -546,6 +546,7 @@
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM
@@ -733,15 +734,27 @@
config BOOT_RAW
bool
+config CEVT_BCM1480
+ bool
+
config CEVT_GT641XX
bool
config CEVT_R4K
bool
+config CEVT_SB1250
+ bool
+
config CEVT_TXX9
bool
+config CSRC_BCM1480
+ bool
+
+config CSRC_SB1250
+ bool
+
config CFE
bool
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index afa7007..85a9094 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -9,3 +9,5 @@
lib-y := init.o board_setup.o irqmap.o
obj-y := platform.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index 01ebff6..49c0fb4 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -34,15 +34,6 @@
}
};
-static struct resource mtx1_sys_btn[] = {
- [0] = {
- .start = 7,
- .end = 7,
- .name = "mtx1-sys-btn-gpio",
- .flags = IORESOURCE_IRQ,
- }
-};
-
static struct platform_device mtx1_wdt = {
.name = "mtx1-wdt",
.id = 0,
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 22b673c..970b1b1 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -3,3 +3,5 @@
#
lib-y := init.o board_setup.o irqmap.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 5dbc986..b98bebf 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -68,9 +68,11 @@
void __init board_setup(void)
{
char *argptr = NULL;
- u32 pin_func;
#if 0
+ {
+ u32 pin_func;
+
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
@@ -81,11 +83,13 @@
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
+ }
#endif
#if defined(CONFIG_I2C_AU1550)
{
u32 freq0, clksrc;
+ u32 pin_func;
/* Select SMBUS in CPLD */
bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index bdf00e2..c096be4 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -94,51 +94,41 @@
bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
}
-static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+static unsigned int pb1200_setup_cascade(void)
{
- if (++pb1200_cascade_en == 1)
- {
- request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
-#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
- if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
- {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- while(1);
- }
-#endif
- }
- pb1200_enable_irq(irq_nr);
+ int err;
+
+ err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
+ if (err)
+ return err;
+
return 0;
}
-static void pb1200_shutdown_irq( unsigned int irq_nr )
+static unsigned int pb1200_startup_irq(unsigned int irq)
{
- pb1200_disable_irq(irq_nr);
- if (--pb1200_cascade_en == 0)
- {
- free_irq(AU1000_GPIO_7, &pb1200_cascade_handler );
+ if (++pb1200_cascade_en == 1) {
+ int res;
+
+ res = pb1200_setup_cascade();
+ if (res)
+ return res;
}
- return;
+
+ pb1200_enable_irq(irq);
+
+ return 0;
}
-static struct irq_chip external_irq_type =
+static void pb1200_shutdown_irq(unsigned int irq)
{
+ pb1200_disable_irq(irq);
+ if (--pb1200_cascade_en == 0)
+ free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
+}
+
+static struct irq_chip external_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
@@ -155,16 +145,38 @@
void _board_init_irq(void)
{
- int irq_nr;
+ unsigned int irq;
- for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
- {
- set_irq_chip_and_handler(irq_nr, &external_irq_type,
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev3. Enable a workaround */
+ if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+ printk("updated to latest revision. This software will not\n");
+ printk("work on anything less than CPLD rev4\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ panic("Game over. Your score is 0.");
+ }
+#endif
+
+ for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
+ set_irq_chip_and_handler(irq, &external_irq_type,
handle_level_irq);
- pb1200_disable_irq(irq_nr);
+ pb1200_disable_irq(irq);
}
- /* GPIO_7 can not be hooked here, so it is hooked upon first
- request of any source attached to the cascade */
+ /*
+ * GPIO_7 can not be hooked here, so it is hooked upon first
+ * request of any source attached to the cascade
+ */
}
-
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 24378b9..6dd8f0d 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -77,7 +77,7 @@
void __init plat_time_init(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
- unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2,
+ unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
if (div == 33)
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index ae25b48..d7f8a78 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -97,9 +97,10 @@
if (pending & IE_IRQ4) {
r4030_read_reg32(JAZZ_TIMER_REGISTER);
do_IRQ(JAZZ_TIMER_IRQ);
- } else if (pending & IE_IRQ2)
- do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK));
- else if (pending & IE_IRQ1) {
+ } else if (pending & IE_IRQ2) {
+ irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK;
+ do_IRQ(irq);
+ } else if (pending & IE_IRQ1) {
irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2;
if (likely(irq > 0))
do_IRQ(irq + JAZZ_IRQ_START - 1);
@@ -117,16 +118,16 @@
struct clock_event_device r4030_clockevent = {
.name = "r4030",
.features = CLOCK_EVT_FEAT_PERIODIC,
- .rating = 100,
+ .rating = 300,
.irq = JAZZ_TIMER_IRQ,
- .cpumask = CPU_MASK_CPU0,
.set_mode = r4030_set_mode,
};
static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
{
- r4030_clockevent.event_handler(&r4030_clockevent);
+ struct clock_event_device *cd = dev_id;
+ cd->event_handler(cd);
return IRQ_HANDLED;
}
@@ -134,15 +135,22 @@
.handler = r4030_timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_CPU0,
- .name = "timer",
+ .name = "R4030 timer",
};
void __init plat_time_init(void)
{
- struct irqaction *irq = &r4030_timer_irqaction;
+ struct clock_event_device *cd = &r4030_clockevent;
+ struct irqaction *action = &r4030_timer_irqaction;
+ unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
+ cd->cpumask = cpumask_of_cpu(cpu);
+ clockevents_register_device(cd);
+ action->dev_id = cd;
+ setup_irq(JAZZ_TIMER_IRQ, action);
+
/*
* Set clock to 100Hz.
*
@@ -150,8 +158,5 @@
* a programmable 4-bit divider. This makes it fairly inflexible.
*/
r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
- setup_irq(JAZZ_TIMER_IRQ, irq);
-
- clockevents_register_device(&r4030_clockevent);
setup_pit_timer();
}
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 3196509..b551535 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -8,9 +8,13 @@
ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
+obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
+obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
+obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
+obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
new file mode 100644
index 0000000..21e6d63
--- /dev/null
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1480_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
+
+ sprintf(name, "bcm1480-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
+
+ bcm1480_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
new file mode 100644
index 0000000..e2029d0
--- /dev/null
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define IMR_IP2_VAL K_INT_MAP_I0
+#define IMR_IP3_VAL K_INT_MAP_I1
+#define IMR_IP4_VAL K_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1250_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ /* Only have 4 general purpose timers, and we use last one as hpt */
+ BUG_ON(cpu > 2);
+
+ sprintf(name, "sb1250-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ sb1250_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+ (irq << 3)));
+
+ sb1250_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
new file mode 100644
index 0000000..868745e
--- /dev/null
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+static cycle_t bcm1480_hpt_read(void)
+{
+ return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+struct clocksource bcm1480_clocksource = {
+ .name = "zbbus-cycles",
+ .rating = 200,
+ .read = bcm1480_hpt_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1480_clocksource;
+ unsigned int plldiv;
+ unsigned long zbbus;
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+ clocksource_set_clock(cs, zbbus);
+ clocksource_register(cs);
+}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
new file mode 100644
index 0000000..ebb16e6
--- /dev/null
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define SB1250_HPT_NUM 3
+#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
+
+/*
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again.
+ */
+static cycle_t sb1250_hpt_read(void)
+{
+ unsigned int count;
+
+ count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+ return SB1250_HPT_VALUE - count;
+}
+
+struct clocksource bcm1250_clocksource = {
+ .name = "MIPS",
+ .rating = 200,
+ .read = sb1250_hpt_read,
+ .mask = CLOCKSOURCE_MASK(23),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1250_clocksource;
+
+ /* Setup hpt using timer #3 but do not enable irq for it */
+ __raw_writeq(0,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+ __raw_writeq(SB1250_HPT_VALUE,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_INIT)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+
+ clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+ clocksource_register(cs);
+}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 5d9830d..c2d497c 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -12,8 +12,9 @@
#include <asm/delay.h>
#include <asm/i8253.h>
#include <asm/io.h>
+#include <asm/time.h>
-static DEFINE_SPINLOCK(i8253_lock);
+DEFINE_SPINLOCK(i8253_lock);
/*
* Initialize the PIT timer.
@@ -87,11 +88,10 @@
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = init_pit_timer,
.set_next_event = pit_next_event,
- .shift = 32,
.irq = 0,
};
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
pit_clockevent.event_handler(&pit_clockevent);
@@ -111,19 +111,20 @@
*/
void __init setup_pit_timer(void)
{
+ struct clock_event_device *cd = &pit_clockevent;
+ unsigned int cpu = smp_processor_id();
+
/*
* Start pit with the boot cpu mask and make it global after the
* IO_APIC has been initialized.
*/
- pit_clockevent.cpumask = cpumask_of_cpu(0);
- pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
- pit_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7FFF, &pit_clockevent);
- pit_clockevent.min_delta_ns =
- clockevent_delta2ns(0xF, &pit_clockevent);
- clockevents_register_device(&pit_clockevent);
+ cd->cpumask = cpumask_of_cpu(cpu);
+ clockevent_set_clock(cd, CLOCK_TICK_RATE);
+ cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0xF, cd);
+ clockevents_register_device(cd);
- irq0.mask = cpumask_of_cpu(0);
+ irq0.mask = cpumask_of_cpu(cpu);
setup_irq(0, &irq0);
}
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 27228f5..3284b9b 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -3,8 +3,7 @@
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (c) 2003, 2004 Maciej W. Rozycki
*
- * Common time service routines for MIPS machines. See
- * Documentation/mips/time.README.
+ * Common time service routines for MIPS machines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -18,28 +17,17 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/param.h>
-#include <linux/profile.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/smp.h>
-#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <asm/bootinfo.h>
-#include <asm/cache.h>
-#include <asm/compiler.h>
-#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/div64.h>
-#include <asm/sections.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
-#include <irq.h>
-
/*
* forward reference
*/
@@ -63,14 +51,6 @@
}
/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
- return 0;
-}
-
-/*
* High precision timer functions for a R4k-compatible timer.
*/
static cycle_t c0_hpt_read(void)
@@ -80,22 +60,6 @@
int (*mips_timer_state)(void);
-/*
- * local_timer_interrupt() does profiling and process accounting
- * on a per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- *
- * In SMP mode, it might invoked by per-CPU timer interrupt, or
- * a broadcasted inter-processor interrupt which itself is triggered
- * by the global timer interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
-{
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
-}
-
int null_perf_irq(void)
{
return 0;
@@ -120,6 +84,13 @@
unsigned int mips_hpt_frequency;
+static struct clocksource clocksource_mips = {
+ .name = "MIPS",
+ .read = c0_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static unsigned int __init calibrate_hpt(void)
{
cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
@@ -162,12 +133,6 @@
return frequency >> log_2_loops;
}
-struct clocksource clocksource_mips = {
- .name = "MIPS",
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
@@ -203,9 +168,6 @@
static void __init init_mips_clocksource(void)
{
- if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
- return;
-
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
@@ -227,7 +189,7 @@
* setup_irq calls and each clock_event_device should use its own
* struct irqrequest.
*/
-void __init plat_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(void)
{
BUG();
}
@@ -236,21 +198,8 @@
{
plat_time_init();
- /* Choose appropriate high precision timer routines. */
- if (!cpu_has_counter && !clocksource_mips.read)
- /* No high precision timer -- sorry. */
- clocksource_mips.read = null_hpt_read;
- else if (!mips_hpt_frequency && !mips_timer_state) {
- /* A high precision timer of unknown frequency. */
- if (!clocksource_mips.read)
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- } else {
+ if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
/* We know counter frequency. Or we can get it. */
- if (!clocksource_mips.read) {
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- }
if (!mips_hpt_frequency)
mips_hpt_frequency = calibrate_hpt();
@@ -258,8 +207,8 @@
printk("Using %u.%03u MHz high precision timer.\n",
((mips_hpt_frequency + 500) / 1000) / 1000,
((mips_hpt_frequency + 500) / 1000) % 1000);
+ init_mips_clocksource();
}
- init_mips_clocksource();
mips_clockevent_init();
}
diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c
index 4681757..11f9847 100644
--- a/arch/mips/qemu/q-irq.c
+++ b/arch/mips/qemu/q-irq.c
@@ -1,4 +1,5 @@
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/linkage.h>
#include <asm/i8259.h>
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index dc59c3b70..08d4536 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -131,7 +131,7 @@
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
- int slice putoslice(cpu);
+ int slice = cputoslice(cpu);
unsigned long cnt;
cnt = LOCAL_HUB_L(PI_RT_COUNT);
@@ -169,7 +169,7 @@
/*
* Ack
*/
- LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, cnt);
+ LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, 0);
cd->event_handler(cd);
return IRQ_HANDLED;
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 7309e48..77febd6 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -42,7 +42,7 @@
static int __init uart8250_init(void)
{
uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
- uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
+ uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2;
return platform_device_register(&uart8250_device);
}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index e8fb880..366b19d 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -1,5 +1,7 @@
config SIBYTE_SB1250
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
@@ -9,6 +11,8 @@
config SIBYTE_BCM1120
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
@@ -16,6 +20,8 @@
config SIBYTE_BCM1125
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@@ -24,6 +30,8 @@
config SIBYTE_BCM1125H
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@@ -33,12 +41,16 @@
config SIBYTE_BCM112X
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_HAS_ZBUS_PROFILING
@@ -47,6 +59,8 @@
config SIBYTE_BCM1x55
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 61790c4..e28d626 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -265,21 +265,6 @@
}
}
-
-static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-
-static struct irqaction bcm1480_dummy_action = {
- .handler = bcm1480_dummy_handler,
- .flags = 0,
- .mask = CPU_MASK_NONE,
- .name = "bcm1480-private",
- .next = NULL,
- .dev_id = 0
-};
-
/*
* init_IRQ is called early in the boot sequence from init/main.c. It
* is responsible for setting up the interrupt mapper and installing the
@@ -308,7 +293,6 @@
void __init arch_init_irq(void)
{
-
unsigned int i, cpu;
u64 tmp;
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index bbf19bf..1680a68 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -15,163 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
+#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-#include <asm/sibyte/bcm1480_scd.h>
-
-#include <asm/sibyte/sb1250.h>
-
-
-#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
-#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
-#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, timer_cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_init;
- unsigned int cnt;
- int res;
-
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
- cnt = __raw_readq(timer_init);
- cnt += delta;
- __raw_writeq(cnt, timer_init);
- res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
-
- return res;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
- void __iomem *timer_cfg;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-
- /* Reset the timer */
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1480_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
-
- sprintf(name, "bcm1480-counter %d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- bcm1480_mask_irq(cpu, irq);
-
- /*
- * Map timer interrupt to IP[4] of this cpu
- */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(cpu,
- R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
-
- bcm1480_unmask_irq(cpu, irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, action);
-}
-
-static cycle_t bcm1480_hpt_read(void)
-{
- return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
-}
-
-struct clocksource bcm1480_clocksource = {
- .name = "zbbus-cycles",
- .rating = 200,
- .read = bcm1480_hpt_read,
- .mask = CLOCKSOURCE_MASK(64),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1480_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1480_clocksource;
- unsigned int plldiv;
- unsigned long zbbus;
-
- plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
- zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
-}
+extern void sb1480_clockevent_init(void);
+extern void sb1480_clocksource_init(void);
void __init plat_time_init(void)
{
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 52d18fc..eac9065 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -236,20 +236,6 @@
}
-static irqreturn_t sb1250_dummy_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-
-static struct irqaction sb1250_dummy_action = {
- .handler = sb1250_dummy_handler,
- .flags = 0,
- .mask = CPU_MASK_NONE,
- .name = "sb1250-private",
- .next = NULL,
- .dev_id = 0
-};
-
/*
* arch_init_irq is called early in the boot sequence from init/main.c via
* init_IRQ. It is responsible for setting up the interrupt mapper and
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 95ad34e..68337bf 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -15,195 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/init.h>
-/*
- * These are routines to set up and handle interrupts from the
- * sb1250 general purpose timer 0. We're using the timer as a
- * system clock, so we set it up to run at 100 Hz. On every
- * interrupt, we update our idea of what the time of day is,
- * then call do_timer() in the architecture-independent kernel
- * code to do general bookkeeping (e.g. update jiffies, run
- * bottom halves, etc.)
- */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
-
-#include <asm/irq.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_scd.h>
-
-
-#define IMR_IP2_VAL K_INT_MAP_I0
-#define IMR_IP3_VAL K_INT_MAP_I1
-#define IMR_IP4_VAL K_INT_MAP_I2
-
-#define SB1250_HPT_NUM 3
-#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
-
-
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch(mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, timer_cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- __raw_writeq(0, timer_cfg);
- __raw_writeq(delta, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
- return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
-
- /* ACK interrupt */
- ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
- .handler = sibyte_counter_handler,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1250_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- /* Only have 4 general purpose timers, and we use last one as hpt */
- BUG_ON(cpu > 2);
-
- sprintf(name, "bcm1480-counter %d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- sb1250_mask_irq(cpu, irq);
-
- /* Map the timer interrupt to ip[4] of this cpu */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
- (irq << 3)));
- cd->cpumask = cpumask_of_cpu(0);
-
- sb1250_unmask_irq(cpu, irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, &sibyte_irqaction);
-}
-
-/*
- * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
- * again.
- */
-static cycle_t sb1250_hpt_read(void)
-{
- unsigned int count;
-
- count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
-
- return SB1250_HPT_VALUE - count;
-}
-
-struct clocksource bcm1250_clocksource = {
- .name = "MIPS",
- .rating = 200,
- .read = sb1250_hpt_read,
- .mask = CLOCKSOURCE_MASK(23),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1250_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1250_clocksource;
-
- /* Setup hpt using timer #3 but do not enable irq for it */
- __raw_writeq(0,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
- __raw_writeq(SB1250_HPT_VALUE,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_INIT)));
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
-
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
-}
+extern void sb1250_clocksource_init(void);
+extern void sb1250_clockevent_init(void);
void __init plat_time_init(void)
{
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 60bc62e..6f339af 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -1,6 +1,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/time.h>
+#include <linux/clockchips.h>
#include <asm/i8253.h>
#include <asm/sni.h>
@@ -80,7 +81,7 @@
unsigned int cpu = smp_processor_id();
cd->cpumask = cpumask_of_cpu(cpu);
-
+ clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
}
@@ -169,8 +170,6 @@
mips_hpt_frequency = r4k_tick * HZ;
- setup_pit_timer();
-
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4ec716d..1330061 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -513,7 +513,7 @@
default n
help
Select this option if you want to build an zfcpdump enabled kernel.
- Refer to "Documentation/s390/zfcpdump.txt" for more details on this.
+ Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
endmenu
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 247f8a6..22a3eb3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -182,9 +182,7 @@
bool
config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
+ bool
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
@@ -291,9 +289,7 @@
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at
- <http://www.m17n.org/linux-sh/dreamcast/>. There is a
- Dreamcast project is at <http://linuxdc.sourceforge.net/>.
+ More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b507b50..ab2f9f3 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -86,6 +86,14 @@
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
+config IRQSTACKS
+ bool "Use separate kernel stacks when processing interrupts"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use separate kernel stacks
+ for handling hard and soft interrupts. This can help avoid
+ overflowing the process kernel stacks.
+
config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 408342b..e189fae 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -66,7 +66,7 @@
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
-OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -R .stab -R .stabstr -S
#
# arch/sh/defconfig doesn't reflect any real hardware, and as such should
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index afe9de7..0fdc0bc 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pata_platform.h>
+#include <linux/types.h>
+#include <net/ax88796.h>
#include <asm/machvec.h>
#include <asm/r7780rp.h>
#include <asm/clock.h>
@@ -136,11 +138,50 @@
.resource = heartbeat_resources,
};
+static struct ax_plat_data ax88796_platdata = {
+ .flags = AXFLG_HAS_93CX6,
+ .wordlength = 2,
+ .dcr_val = 0x1,
+ .rcr_val = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+ {
+#ifdef CONFIG_SH_R7780RP
+ .start = 0xa5800400,
+ .end = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+ .start = 0xa4100400,
+ .end = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_AX88796,
+ .end = IRQ_AX88796,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ax88796_device = {
+ .name = "ax88796",
+ .id = 0,
+
+ .dev = {
+ .platform_data = &ax88796_platdata,
+ },
+
+ .num_resources = ARRAY_SIZE(ax88796_resources),
+ .resource = ax88796_resources,
+};
+
+
static struct platform_device *r7780rp_devices[] __initdata = {
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
&cf_ide_device,
&heartbeat_device,
+ &ax88796_device,
};
static int __init r7780rp_devices_setup(void)
@@ -183,6 +224,34 @@
ctrl_outw(0x0001, PA_POFF);
}
+static inline unsigned char is_ide_ioaddr(unsigned long addr)
+{
+ return ((cf_ide_resources[0].start <= addr &&
+ addr <= cf_ide_resources[0].end) ||
+ (cf_ide_resources[1].start <= addr &&
+ addr <= cf_ide_resources[1].end));
+}
+
+void highlander_writeb(u8 b, void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ ctrl_outw((u16)b, tmp);
+ else
+ ctrl_outb(b, tmp);
+}
+
+u8 highlander_readb(void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ return ctrl_inw(tmp) & 0xff;
+ else
+ return ctrl_inb(tmp);
+}
+
/*
* Initialize the board
*/
@@ -267,4 +336,6 @@
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
+ .mv_readb = highlander_readb,
+ .mv_writeb = highlander_writeb,
};
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 03b6345..20f0640 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -103,8 +103,8 @@
ctrl_outl(0x00051001, MSTPCR0);
ctrl_outl(0x00000000, MSTPCR1);
- /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
- ctrl_outl(0xffffbfC0, MSTPCR2);
+ /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
+ ctrl_outl(0xffffb7c0, MSTPCR2);
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 5c29338..158e03f 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Thu Jul 12 12:33:15 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:30:49 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -13,39 +13,40 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -66,7 +67,6 @@
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -75,24 +75,17 @@
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -115,7 +108,6 @@
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -123,6 +115,7 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -137,7 +130,6 @@
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -149,15 +141,17 @@
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_MAX_ACTIVE_REGIONS=2
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -167,12 +161,14 @@
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -182,7 +178,9 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -190,12 +188,11 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
@@ -214,6 +211,7 @@
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -249,6 +247,7 @@
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_GUSA=y
#
# Boot options
@@ -268,10 +267,6 @@
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -322,6 +317,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -348,10 +344,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -371,6 +363,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -379,33 +372,17 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -419,14 +396,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -434,6 +408,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -463,12 +438,9 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -478,7 +450,6 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -543,6 +514,7 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -556,45 +528,26 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -603,17 +556,20 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -631,11 +587,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -653,15 +612,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -669,6 +620,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -678,7 +630,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -732,21 +683,11 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
@@ -756,21 +697,31 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -787,19 +738,16 @@
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -819,7 +767,6 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -839,6 +786,12 @@
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
#
@@ -855,20 +808,14 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -883,32 +830,8 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -925,10 +848,6 @@
# CONFIG_RTC_DRV_TEST is not set
#
-# I2C RTC drivers
-#
-
-#
# SPI RTC drivers
#
@@ -936,8 +855,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -946,17 +867,9 @@
CONFIG_RTC_DRV_SH=y
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -1017,7 +930,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -1036,10 +948,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1065,17 +974,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1116,23 +1020,18 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1141,6 +1040,7 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1150,6 +1050,7 @@
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
@@ -1159,17 +1060,21 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
+# CONFIG_IRQSTACKS is not set
# CONFIG_SH_KGDB is not set
#
@@ -1177,10 +1082,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
@@ -1201,6 +1103,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1214,15 +1117,14 @@
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
@@ -1232,6 +1134,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 1502a14..0814a5a 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -114,7 +114,7 @@
{ INT_MWPDI, "MWPDI: PERR from target at data write"},
{ INT_MRDPEI, "MRDPEI: Master read data parity error"}
};
-#define NUM_PCI_INT_ERRS (sizeof(int_error)/sizeof(struct pci_err))
+#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error)
static struct pci_err aint_error[]={
{ AINT_MBI, "MBI: Master broken"},
@@ -126,7 +126,7 @@
{ AINT_WDPE, "WDPE: Write data parity"}
};
-#define NUM_PCI_AINT_ERRS (sizeof(aint_error)/sizeof(struct pci_err))
+#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error)
static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors)
{
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 5da3254..56ea7b2 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -49,7 +49,6 @@
* bits/4. This is to make it easier to read the value directly from the
* datasheets. The IPR address is calculated using the ipr_offset table.
*/
-
void register_ipr_controller(struct ipr_desc *desc)
{
int i;
@@ -71,12 +70,4 @@
disable_ipr_irq(p->irq);
}
}
-
EXPORT_SYMBOL(register_ipr_controller);
-
-#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
-int ipr_irq_demux(int irq)
-{
- return irq;
-}
-#endif
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 55f6610..b9c6547 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -14,6 +14,32 @@
#include <asm/mmzone.h>
#include <asm/sci.h>
+static struct resource usbf_resources[] = {
+ [0] = {
+ .name = "m66592_udc",
+ .start = 0xA4480000,
+ .end = 0xA44800FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "m66592_udc",
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbf_device = {
+ .name = "m66592_udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usbf_resources),
+ .resource = usbf_resources,
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
@@ -47,6 +73,7 @@
};
static struct platform_device *sh7722_devices[] __initdata = {
+ &usbf_device,
&sci_device,
};
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 4b49d03..348da19 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -69,7 +69,7 @@
}
#endif
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
@@ -85,7 +85,7 @@
asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
union irq_ctx *curctx, *irqctx;
#endif
@@ -109,7 +109,7 @@
irq = irq_demux(evt2irq(irq));
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
curctx = (union irq_ctx *)current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
@@ -157,7 +157,7 @@
return 1;
}
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
static char softirq_stack[NR_CPUS * THREAD_SIZE]
__attribute__((__section__(".bss.page_aligned")));
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b749403..0b8c45d 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -32,12 +32,6 @@
#include <asm/clock.h>
#include <asm/mmu_context.h>
-extern void * __rd_start, * __rd_end;
-
-/*
- * Machine setup..
- */
-
/*
* Initialize loops_per_jiffy as 10000000 (1000MIPS).
* This value will be used at the very early stage of serial setup.
@@ -63,33 +57,25 @@
extern int root_mountflags;
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-static struct resource code_resource = { .name = "Kernel code", };
-static struct resource data_resource = { .name = "Kernel data", };
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
+
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
unsigned long memory_start;
EXPORT_SYMBOL(memory_start);
-
-unsigned long memory_end;
+unsigned long memory_end = 0;
EXPORT_SYMBOL(memory_end);
static int __init early_parse_mem(char *p)
@@ -195,14 +181,7 @@
sparse_memory_present_with_active_regions(0);
#ifdef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
- if (&__rd_start != &__rd_end) {
- LOADER_TYPE = 1;
- INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
- __MEMORY_START;
- INITRD_SIZE = (unsigned long)&__rd_end -
- (unsigned long)&__rd_start;
- }
+ ROOT_DEV = Root_RAM0;
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
@@ -265,7 +244,8 @@
data_resource.end = virt_to_phys(_edata)-1;
memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
- memory_end = memory_start + __MEMORY_SIZE;
+ if (!memory_end)
+ memory_end = memory_start + __MEMORY_SIZE;
#ifdef CONFIG_CMDLINE_BOOL
strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 6d5abba..0956fb3 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -1,4 +1,4 @@
-/* $Id: vmlinux.lds.S,v 1.8 2003/05/16 17:18:14 lethal Exp $
+/*
* ld script to make SuperH Linux kernel
* Written by Niibe Yutaka
*/
@@ -15,121 +15,124 @@
ENTRY(_start)
SECTIONS
{
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
- _text = .; /* Text and read-only data */
- text = .; /* Text and read-only data */
- .empty_zero_page : {
- *(.empty_zero_page)
+ . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+ _text = .; /* Text and read-only data */
+
+ .empty_zero_page : {
+ *(.empty_zero_page)
} = 0
- .text : {
- *(.text.head)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.fixup)
- *(.gnu.warning)
+
+ .text : {
+ *(.text.head)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
} = 0x0009
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
- _etext = .; /* End of text section */
+ _etext = .; /* End of text section */
- RODATA
+ BUG_TABLE
+ NOTES
+ RO_DATA(PAGE_SIZE)
- BUG_TABLE
+ . = ALIGN(THREAD_SIZE);
+ .data : { /* Data */
+ *(.data.init_task)
- .data : { /* Data */
- DATA_DATA
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(PAGE_SIZE);
- __rd_start = .;
- *(.initrd)
- . = ALIGN(PAGE_SIZE);
- __rd_end = .;
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.read_mostly)
- CONSTRUCTORS
+ . = ALIGN(PAGE_SIZE);
+ *(.data.page_aligned)
+
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+
+ DATA_DATA
+ CONSTRUCTORS
}
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : { *(.data.page_aligned) }
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
+ _edata = .; /* End of data section */
- PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+ _sinittext = .;
+ .init.text : { *(.init.text) }
+ _einittext = .;
+ .init.data : { *(.init.data) }
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
- _edata = .; /* End of data section */
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- _sinittext = .;
- .init.text : { *(.init.text) }
- _einittext = .;
- .init.data : { *(.init.data) }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
-
- /* .exit.text is discarded at runtime, not link time, to deal with
- references from .rodata */
- .exit.text : { *(.exit.text) }
- .exit.data : { *(.exit.data) }
+ SECURITY_INIT
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
-
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
+ . = ALIGN(PAGE_SIZE);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
#endif
- . = ALIGN(4);
- __machvec_start = .;
- .machvec.init : { *(.machvec.init) }
- __machvec_end = .;
-
- . = ALIGN(PAGE_SIZE);
- .bss : {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
. = ALIGN(4);
- _ebss = .; /* uClinux MTD sucks */
- _end = . ;
- }
+ __machvec_start = .;
+ .machvec.init : { *(.machvec.init) }
+ __machvec_end = .;
- /* When something in the kernel is NOT compiled as a module, the
- * module cleanup code and data are put into these segments. Both
- * can then be thrown away, as cleanup code is never called unless
- * it's a module.
- */
- /DISCARD/ : {
- *(.exitcall.exit)
+ PERCPU(PAGE_SIZE)
+
+ /*
+ * .exit.text is discarded at runtime, not link time, to deal with
+ * references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+ . = ALIGN(PAGE_SIZE);
+ .bss : {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .; /* uClinux MTD sucks */
+ _end = . ;
}
- STABS_DEBUG
+ /*
+ * When something in the kernel is NOT compiled as a module, the
+ * module cleanup code and data are put into these segments. Both
+ * can then be thrown away, as cleanup code is never called unless
+ * it's a module.
+ */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
- DWARF_DEBUG
+ STABS_DEBUG
+ DWARF_DEBUG
}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
index c9bf2af..6d59ee7 100644
--- a/arch/sh/kernel/vsyscall/vsyscall.lds.S
+++ b/arch/sh/kernel/vsyscall/vsyscall.lds.S
@@ -38,7 +38,10 @@
.text : { *(.text) } :text =0x90909090
.note : { *(.note.*) } :text :note
.eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .eh_frame : {
+ KEEP (*(.eh_frame))
+ LONG (0)
+ } :text
.dynamic : { *(.dynamic) } :text :dynamic
.useless : {
*(.got.plt) *(.got)
diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S
index a81dbdb..3d8409d 100644
--- a/arch/sh/mm/copy_page.S
+++ b/arch/sh/mm/copy_page.S
@@ -255,7 +255,11 @@
EX( mov.l @r5+,r9 )
EX( mov.l @r5+,r10 )
EX( mov.l @r5+,r11 )
+#ifdef CONFIG_CPU_SH4
EX( movca.l r0,@r4 )
+#else
+EX( mov.l r0,@r4 )
+#endif
add #-32, r6
EX( mov.l r1,@(4,r4) )
mov #32, r0
diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c
index ebee7e2..6b9a98e 100644
--- a/arch/sh/oprofile/op_model_sh7750.c
+++ b/arch/sh/oprofile/op_model_sh7750.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
-#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -44,8 +43,6 @@
*/
#define NR_CNTRS 2
-extern const char *get_cpu_subtype(void);
-
struct op_counter_config {
unsigned long enabled;
unsigned long event;
@@ -111,17 +108,12 @@
* behavior.
*/
-static int sh7750_timer_notify(struct notifier_block *self,
- unsigned long val, void *regs)
+static int sh7750_timer_notify(struct pt_regs *regs)
{
- oprofile_add_sample((struct pt_regs *)regs, 0);
+ oprofile_add_sample(regs, 0);
return 0;
}
-static struct notifier_block sh7750_timer_notifier = {
- .notifier_call = sh7750_timer_notify,
-};
-
static u64 sh7750_read_counter(int counter)
{
u32 hi, lo;
@@ -240,7 +232,7 @@
ctrl_outw(pmcr | PMCR_ENABLE, PMCR2);
}
- return register_profile_notifier(&sh7750_timer_notifier);
+ return register_timer_hook(sh7750_timer_notify);
}
static void sh7750_perf_counter_stop(void)
@@ -248,7 +240,7 @@
ctrl_outw(ctrl_inw(PMCR1) & ~PMCR_PMEN, PMCR1);
ctrl_outw(ctrl_inw(PMCR2) & ~PMCR_PMEN, PMCR2);
- unregister_profile_notifier(&sh7750_timer_notifier);
+ unregister_timer_hook(sh7750_timer_notify);
}
static struct oprofile_operations sh7750_perf_counter_ops = {
@@ -257,13 +249,13 @@
.stop = sh7750_perf_counter_stop,
};
-int __init oprofile_arch_init(struct oprofile_operations **ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER))
return -ENODEV;
- sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype();
- *ops = &sh7750_perf_counter_ops;
+ ops = &sh7750_perf_counter_ops;
+ ops->cpu_type = (char *)get_cpu_subtype(¤t_cpu_data);
printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
sh7750_perf_counter_ops.cpu_type);
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 439bfe3..ff07169 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -1,26 +1,35 @@
#
-# List of boards.
+# MACH_<xxx> CONFIG_<xxx>
#
#
-# MACH_<xxx> CONFIG_<xxx>
+# List of board groups.
#
SE SH_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
+HIGHLANDER SH_HIGHLANDER
+RTS7751R2D SH_RTS7751R2D
+
+#
+# List of companion chips / MFDs.
+#
+HD64461 HD64461
+HD64465 HD64465
+
+#
+# List of boards.
+#
7206SE SH_7206_SOLUTION_ENGINE
+7343SE SH_7343_SOLUTION_ENGINE
7619SE SH_7619_SOLUTION_ENGINE
+7722SE SH_7722_SOLUTION_ENGINE
+7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
-HD64461 HD64461
-HD64465 HD64465
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
-RTS7751R2D SH_RTS7751R2D
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
@@ -32,3 +41,7 @@
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
LBOXRE2 SH_LBOX_RE2
+X3PROTO SH_X3PROTO
+MAGICPANELR2 SH_MAGIC_PANEL_R2
+R2D_PLUS RTS7751R2D_PLUS
+R2D_1 RTS7751R2D_1
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
index ba204ba..6884d5a 100644
--- a/arch/sh64/Kconfig
+++ b/arch/sh64/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/SH64 Kernel Configuration"
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index bd59ab0..10b212a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -408,7 +408,7 @@
config SOLARIS_EMUL
tristate "Solaris binary emulation (EXPERIMENTAL)"
- depends on SPARC32_COMPAT && EXPERIMENTAL
+ depends on SPARC32_COMPAT && NET && EXPERIMENTAL
help
This is experimental code which will enable you to run (many)
Solaris binaries on your SPARC Linux machine.
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index e023d4b..22734ac 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 21 19:57:44 2007
+# Linux kernel version: 2.6.24-rc1
+# Wed Oct 31 15:36:47 2007
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -19,6 +19,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
@@ -55,7 +56,8 @@
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
@@ -117,22 +119,7 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_US3_FREQ=m
-CONFIG_US2E_FREQ=m
+# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -161,7 +148,7 @@
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
-# CONFIG_SUN_LDOMS is not set
+CONFIG_SUN_LDOMS=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -338,6 +325,7 @@
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
+CONFIG_SUNVDC=m
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
@@ -440,12 +428,12 @@
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -506,7 +494,7 @@
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
@@ -523,6 +511,7 @@
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=m
+CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -577,7 +566,7 @@
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
+CONFIG_NIU=m
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
@@ -702,7 +691,8 @@
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_SERIAL_SUNSAB=m
+CONFIG_SERIAL_SUNSAB=y
+CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -880,9 +870,17 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
-# CONFIG_FB_SBUS is not set
-# CONFIG_FB_XVR500 is not set
-# CONFIG_FB_XVR2500 is not set
+CONFIG_FB_SBUS=y
+# CONFIG_FB_BW2 is not set
+# CONFIG_FB_CG3 is not set
+CONFIG_FB_CG6=y
+CONFIG_FB_FFB=y
+# CONFIG_FB_TCX is not set
+# CONFIG_FB_CG14 is not set
+# CONFIG_FB_P9100 is not set
+# CONFIG_FB_LEO is not set
+CONFIG_FB_XVR500=y
+CONFIG_FB_XVR2500=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -892,7 +890,11 @@
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
@@ -1191,7 +1193,7 @@
#
# Misc Linux/SPARC drivers
#
-CONFIG_SUN_OPENPROMIO=m
+CONFIG_SUN_OPENPROMIO=y
# CONFIG_OBP_FLASH is not set
# CONFIG_SUN_BPP is not set
# CONFIG_BBC_I2C is not set
@@ -1199,11 +1201,6 @@
# CONFIG_DISPLAY7SEG is not set
#
-# Fibre Channel support
-#
-# CONFIG_FC4 is not set
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1345,6 +1342,7 @@
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1371,6 +1369,7 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 23fad7e..60765e3 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -221,7 +221,7 @@
/* I/O device mmaping on Sparc64. */
EXPORT_SYMBOL(io_remap_pfn_range);
-#ifdef CONFIG_COMPAT
+#if defined(CONFIG_COMPAT) && defined(CONFIG_NET)
/* Solaris/SunOS binary compatibility */
EXPORT_SYMBOL(verify_compat_iovec);
#endif
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index cd8c740..a2cf955 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1070,7 +1070,7 @@
* Not having a register set can lead to trouble.
* Also starfire doesn't have a tod clock.
*/
- if (!mregs && !dregs & !bregs)
+ if (!mregs && !dregs && !bregs)
return -1;
if (mregs) {
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index 7ff0a02..a3e6e4b 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -182,7 +182,9 @@
break;
default:
- BUG();
+ printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n",
+ current->comm, current->pid, tsb_bytes);
+ do_exit(SIGSEGV);
};
tte |= pte_sz_bits(page_sz);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 737c269..2865c10 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -120,13 +120,6 @@
/*
* The following code flushes one page_size worth.
*/
-#if (PAGE_SHIFT == 13)
-#define ITAG_MASK 0xfe
-#elif (PAGE_SHIFT == 16)
-#define ITAG_MASK 0x7fe
-#else
-#error unsupported PAGE_SIZE
-#endif
.section .kprobes.text, "ax"
.align 32
.globl __flush_icache_page
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 970b2de..761ca7b 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,9 +6,8 @@
source "lib/Kconfig.debug"
config EARLY_PRINTK
- bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL && X86_32
default y
- depends on X86_32
help
Write kernel log output directly into the VGA buffer or to a serial
port.
@@ -91,7 +90,7 @@
config IOMMU_DEBUG
bool "Enable IOMMU debugging"
- depends on IOMMU && DEBUG_KERNEL
+ depends on GART_IOMMU && DEBUG_KERNEL
depends on X86_64
help
Force the IOMMU to on even when you have less than 4GB of
@@ -113,7 +112,4 @@
Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings.
-#config X86_REMOTE_DEBUG
-# bool "kgdb debugging stub"
-
endmenu
diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64
index e2542e5..cc468ea 100644
--- a/arch/x86/Kconfig.x86_64
+++ b/arch/x86/Kconfig.x86_64
@@ -97,10 +97,6 @@
bool
default y
-config EARLY_PRINTK
- bool
- default y
-
config GENERIC_ISA_DMA
bool
default y
@@ -479,8 +475,8 @@
# Mark as embedded because too many people got it wrong.
# The code disables itself when not needed.
-config IOMMU
- bool "IOMMU support" if EMBEDDED
+config GART_IOMMU
+ bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
select AGP
@@ -687,7 +683,7 @@
config K8_NB
def_bool y
- depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
+ depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
endmenu
@@ -753,7 +749,6 @@
config DMAR
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
depends on PCI_MSI && ACPI && EXPERIMENTAL
- default y
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index b091c5e..38a83f9 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -170,7 +170,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
-CONFIG_IOMMU=y
+CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 466337a..24671c3 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -25,7 +25,7 @@
obj-$(CONFIG_PM) += suspend_64.o
obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o
+obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
obj-$(CONFIG_KPROBES) += kprobes_64.o
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 8f681ca..5b69927 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,14 +20,14 @@
#include <linux/ioport.h>
#include <asm/e820.h>
#include <asm/io.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/pci-direct.h>
#include <asm/dma.h>
#include <asm/k8.h>
-int iommu_aperture;
-int iommu_aperture_disabled __initdata = 0;
-int iommu_aperture_allowed __initdata = 0;
+int gart_iommu_aperture;
+int gart_iommu_aperture_disabled __initdata = 0;
+int gart_iommu_aperture_allowed __initdata = 0;
int fallback_aper_order __initdata = 1; /* 64MB */
int fallback_aper_force __initdata = 0;
@@ -204,14 +204,15 @@
return 0;
}
-void __init iommu_hole_init(void)
+void __init gart_iommu_hole_init(void)
{
int fix, num;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0;
int valid_agp = 0;
- if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed())
+ if (gart_iommu_aperture_disabled || !fix_aperture ||
+ !early_pci_allowed())
return;
printk(KERN_INFO "Checking aperture...\n");
@@ -222,7 +223,7 @@
continue;
iommu_detected = 1;
- iommu_aperture = 1;
+ gart_iommu_aperture = 1;
aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
aper_size = (32 * 1024 * 1024) << aper_order;
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 2d42b41..066f8c6 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -49,7 +49,7 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
+ NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
@@ -59,10 +59,10 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
- "altmovcr8", "abm", "sse4a",
- "misalignsse", "3dnowprefetch",
- "osvw", "ibs", NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic",
+ "cr8_legacy", "abm", "sse4a", "misalignsse",
+ "3dnowprefetch", "osvw", "ibs", "sse5",
+ "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 639e632..88bb83e 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -17,19 +17,19 @@
#include <asm/io_apic.h>
#include <asm/apic.h>
-#ifdef CONFIG_IOMMU
-#include <asm/iommu.h>
+#ifdef CONFIG_GART_IOMMU
+#include <asm/gart.h>
#endif
static void __init via_bugs(void)
{
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
- !iommu_aperture_allowed) {
+ !gart_iommu_aperture_allowed) {
printk(KERN_INFO
"Looks like a VIA chipset. Disabling IOMMU."
" Override with iommu=allowed\n");
- iommu_aperture_disabled = 1;
+ gart_iommu_aperture_disabled = 1;
}
#endif
}
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 1a20fe31..6bf1f71 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -36,7 +36,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/tce.h>
#include <asm/pci-direct.h>
diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c
index 393e272..aa805b1 100644
--- a/arch/x86/kernel/pci-dma_64.c
+++ b/arch/x86/kernel/pci-dma_64.c
@@ -9,7 +9,7 @@
#include <linux/module.h>
#include <linux/dmar.h>
#include <asm/io.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/calgary.h>
int iommu_merge __read_mostly = 1;
@@ -275,7 +275,7 @@
swiotlb = 1;
#endif
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
gart_parse_options(p);
#endif
@@ -298,8 +298,8 @@
* The order of these functions is important for
* fall-back/fail-over reasons
*/
-#ifdef CONFIG_IOMMU
- iommu_hole_init();
+#ifdef CONFIG_GART_IOMMU
+ gart_iommu_hole_init();
#endif
#ifdef CONFIG_CALGARY_IOMMU
@@ -321,7 +321,7 @@
intel_iommu_init();
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
gart_iommu_init();
#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 79b514b..06bcba5 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -30,17 +30,17 @@
#include <asm/mtrr.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/cacheflush.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
#include <asm/k8.h>
-unsigned long iommu_bus_base; /* GART remapping area (physical) */
+static unsigned long iommu_bus_base; /* GART remapping area (physical) */
static unsigned long iommu_size; /* size of remapping area bytes */
static unsigned long iommu_pages; /* .. and in pages */
-u32 *iommu_gatt_base; /* Remapping table */
+static u32 *iommu_gatt_base; /* Remapping table */
/* If this is disabled the IOMMU will use an optimized flushing strategy
of only flushing when an mapping is reused. With it true the GART is flushed
@@ -135,8 +135,8 @@
/* Debugging aid for drivers that don't free their IOMMU tables */
static void **iommu_leak_tab;
static int leak_trace;
-int iommu_leak_pages = 20;
-void dump_leak(void)
+static int iommu_leak_pages = 20;
+static void dump_leak(void)
{
int i;
static int dump;
@@ -627,12 +627,12 @@
return;
/* Did we detect a different HW IOMMU? */
- if (iommu_detected && !iommu_aperture)
+ if (iommu_detected && !gart_iommu_aperture)
return;
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
- !iommu_aperture ||
+ !gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
@@ -733,9 +733,9 @@
fix_aperture = 0;
/* duplicated from pci-dma.c */
if (!strncmp(p,"force",5))
- iommu_aperture_allowed = 1;
+ gart_iommu_aperture_allowed = 1;
if (!strncmp(p,"allowed",7))
- iommu_aperture_allowed = 1;
+ gart_iommu_aperture_allowed = 1;
if (!strncmp(p, "memaper", 7)) {
fallback_aper_force = 1;
p += 7;
diff --git a/arch/x86/kernel/pci-nommu_64.c b/arch/x86/kernel/pci-nommu_64.c
index faf70bd..ab08e18 100644
--- a/arch/x86/kernel/pci-nommu_64.c
+++ b/arch/x86/kernel/pci-nommu_64.c
@@ -7,7 +7,7 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/processor.h>
#include <asm/dma.h>
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index b2f405e..102866d 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
diff --git a/arch/x86/kernel/reboot_64.c b/arch/x86/kernel/reboot_64.c
index 776eb06..71b13c5 100644
--- a/arch/x86/kernel/reboot_64.c
+++ b/arch/x86/kernel/reboot_64.c
@@ -17,7 +17,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/apic.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
/*
* Power off function, if any
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index cc0e914..e1e18c34 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -86,9 +86,6 @@
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
-#ifdef CONFIG_MCA
-EXPORT_SYMBOL(machine_id);
-#endif
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index e7a9e36..238633d 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1040,7 +1040,7 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
+ NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
@@ -1050,10 +1050,10 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
- "altmovcr8", "abm", "sse4a",
- "misalignsse", "3dnowprefetch",
- "osvw", "ibs", NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic",
+ "cr8_legacy", "abm", "sse4a", "misalignsse",
+ "3dnowprefetch", "osvw", "ibs", "sse5",
+ "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index fe608a4..13a474d 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -40,7 +40,7 @@
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
-bootmem_data_t node0_bdata;
+static bootmem_data_t node0_bdata;
/*
* numa interface - we expect the numa architecture specific code to have
@@ -404,7 +404,7 @@
}
#ifdef CONFIG_MEMORY_HOTPLUG
-int paddr_to_nid(u64 addr)
+static int paddr_to_nid(u64 addr)
{
int nid;
unsigned long pfn = PFN_DOWN(addr);
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 85ffbb4..d3cb3d6 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -1,5 +1,5 @@
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
mainmenu "Linux/Xtensa Kernel Configuration"
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 5d0e26a..da3a08f 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig ACPI
- bool "ACPI Support (Advanced Configuration and Power Interface) Support"
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
@@ -88,7 +88,8 @@
config ACPI_AC
tristate "AC Adapter"
- depends on X86 && POWER_SUPPLY
+ depends on X86
+ select POWER_SUPPLY
default y
help
This driver adds support for the AC Adapter object, which indicates
@@ -97,7 +98,8 @@
config ACPI_BATTERY
tristate "Battery"
- depends on X86 && POWER_SUPPLY
+ depends on X86
+ select POWER_SUPPLY
default y
help
This driver adds support for battery information through
@@ -352,7 +354,7 @@
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
- depends on POWER_SUPPLY
+ select POWER_SUPPLY
help
This driver adds support for the Smart Battery System, another
type of access to battery information, found on some laptops.
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 681e26b..c2ce0ad 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -125,11 +125,15 @@
return POWER_SUPPLY_TECHNOLOGY_NiMH;
if (!strcasecmp("LION", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LION;
+ if (!strcasecmp("LI-ION", battery->type))
+ return POWER_SUPPLY_TECHNOLOGY_LION;
if (!strcasecmp("LiP", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LIPO;
return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
}
+static int acpi_battery_update(struct acpi_battery *battery);
+
static int acpi_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -139,6 +143,7 @@
if ((!acpi_battery_present(battery)) &&
psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
+ acpi_battery_update(battery);
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (battery->state & 0x01)
@@ -257,7 +262,7 @@
union acpi_object *package,
struct acpi_offsets *offsets, int num)
{
- int i, *x;
+ int i;
union acpi_object *element;
if (package->type != ACPI_TYPE_PACKAGE)
return -EFAULT;
@@ -266,16 +271,21 @@
return -EFAULT;
element = &package->package.elements[i];
if (offsets[i].mode) {
- if (element->type != ACPI_TYPE_STRING &&
- element->type != ACPI_TYPE_BUFFER)
- return -EFAULT;
- strncpy((u8 *)battery + offsets[i].offset,
- element->string.pointer, 32);
+ u8 *ptr = (u8 *)battery + offsets[i].offset;
+ if (element->type == ACPI_TYPE_STRING ||
+ element->type == ACPI_TYPE_BUFFER)
+ strncpy(ptr, element->string.pointer, 32);
+ else if (element->type == ACPI_TYPE_INTEGER) {
+ strncpy(ptr, (u8 *)&element->integer.value,
+ sizeof(acpi_integer));
+ ptr[sizeof(acpi_integer)] = 0;
+ } else return -EFAULT;
} else {
- if (element->type != ACPI_TYPE_INTEGER)
- return -EFAULT;
- x = (int *)((u8 *)battery + offsets[i].offset);
- *x = element->integer.value;
+ if (element->type == ACPI_TYPE_INTEGER) {
+ int *x = (int *)((u8 *)battery +
+ offsets[i].offset);
+ *x = element->integer.value;
+ } else return -EFAULT;
}
}
return 0;
@@ -385,29 +395,81 @@
return acpi_battery_set_alarm(battery);
}
+static ssize_t acpi_battery_alarm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
+ return sprintf(buf, "%d\n", battery->alarm * 1000);
+}
+
+static ssize_t acpi_battery_alarm_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long x;
+ struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
+ if (sscanf(buf, "%ld\n", &x) == 1)
+ battery->alarm = x/1000;
+ if (acpi_battery_present(battery))
+ acpi_battery_set_alarm(battery);
+ return count;
+}
+
+static struct device_attribute alarm_attr = {
+ .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
+ .show = acpi_battery_alarm_show,
+ .store = acpi_battery_alarm_store,
+};
+
+static int sysfs_add_battery(struct acpi_battery *battery)
+{
+ int result;
+
+ battery->update_time = 0;
+ result = acpi_battery_get_info(battery);
+ acpi_battery_init_alarm(battery);
+ if (result)
+ return result;
+ if (battery->power_unit) {
+ battery->bat.properties = charge_battery_props;
+ battery->bat.num_properties =
+ ARRAY_SIZE(charge_battery_props);
+ } else {
+ battery->bat.properties = energy_battery_props;
+ battery->bat.num_properties =
+ ARRAY_SIZE(energy_battery_props);
+ }
+
+ battery->bat.name = acpi_device_bid(battery->device);
+ battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->bat.get_property = acpi_battery_get_property;
+
+ result = power_supply_register(&battery->device->dev, &battery->bat);
+ if (result)
+ return result;
+ return device_create_file(battery->bat.dev, &alarm_attr);
+}
+
+static void sysfs_remove_battery(struct acpi_battery *battery)
+{
+ if (!battery->bat.dev)
+ return;
+ device_remove_file(battery->bat.dev, &alarm_attr);
+ power_supply_unregister(&battery->bat);
+}
+
static int acpi_battery_update(struct acpi_battery *battery)
{
- int saved_present = acpi_battery_present(battery);
int result = acpi_battery_get_status(battery);
- if (result || !acpi_battery_present(battery))
+ if (result)
return result;
- if (saved_present != acpi_battery_present(battery) ||
- !battery->update_time) {
- battery->update_time = 0;
- result = acpi_battery_get_info(battery);
- if (result)
- return result;
- if (battery->power_unit) {
- battery->bat.properties = charge_battery_props;
- battery->bat.num_properties =
- ARRAY_SIZE(charge_battery_props);
- } else {
- battery->bat.properties = energy_battery_props;
- battery->bat.num_properties =
- ARRAY_SIZE(energy_battery_props);
- }
- acpi_battery_init_alarm(battery);
+ if (!acpi_battery_present(battery)) {
+ sysfs_remove_battery(battery);
+ return 0;
}
+ if (!battery->bat.dev)
+ sysfs_add_battery(battery);
return acpi_battery_get_state(battery);
}
@@ -554,10 +616,6 @@
if (!battery || (count > sizeof(alarm_string) - 1))
return -EINVAL;
- if (result) {
- result = -ENODEV;
- goto end;
- }
if (!acpi_battery_present(battery)) {
result = -ENODEV;
goto end;
@@ -688,33 +746,6 @@
#endif
-static ssize_t acpi_battery_alarm_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- return sprintf(buf, "%d\n", battery->alarm * 1000);
-}
-
-static ssize_t acpi_battery_alarm_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned long x;
- struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- if (sscanf(buf, "%ld\n", &x) == 1)
- battery->alarm = x/1000;
- if (acpi_battery_present(battery))
- acpi_battery_set_alarm(battery);
- return count;
-}
-
-static struct device_attribute alarm_attr = {
- .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
- .show = acpi_battery_alarm_show,
- .store = acpi_battery_alarm_store,
-};
-
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
@@ -732,7 +763,9 @@
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
acpi_battery_present(battery));
- kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
+ /* acpi_batter_update could remove power_supply object */
+ if (battery->bat.dev)
+ kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
}
static int acpi_battery_add(struct acpi_device *device)
@@ -756,11 +789,6 @@
if (result)
goto end;
#endif
- battery->bat.name = acpi_device_bid(device);
- battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- battery->bat.get_property = acpi_battery_get_property;
- result = power_supply_register(&battery->device->dev, &battery->bat);
- result = device_create_file(battery->bat.dev, &alarm_attr);
status = acpi_install_notify_handler(device->handle,
ACPI_ALL_NOTIFY,
acpi_battery_notify, battery);
@@ -796,10 +824,7 @@
#ifdef CONFIG_ACPI_PROCFS
acpi_battery_remove_fs(device);
#endif
- if (battery->bat.dev) {
- device_remove_file(battery->bat.dev, &alarm_attr);
- power_supply_unregister(&battery->bat);
- }
+ sysfs_remove_battery(battery);
mutex_destroy(&battery->lock);
kfree(battery);
return 0;
@@ -813,6 +838,7 @@
return -EINVAL;
battery = acpi_driver_data(device);
battery->update_time = 0;
+ acpi_battery_update(battery);
return 0;
}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index fb2cff9..49d432d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -198,12 +198,10 @@
return -ENODEV;
}
/*
- * Get device's current power state if it's unknown
- * This means device power state isn't initialized or previous setting failed
+ * Get device's current power state
*/
- if ((device->power.state == ACPI_STATE_UNKNOWN) || device->flags.force_power_state)
- acpi_bus_get_power(device->handle, &device->power.state);
- if ((state == device->power.state) && !device->flags.force_power_state) {
+ acpi_bus_get_power(device->handle, &device->power.state);
+ if (state == device->power.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return 0;
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 301e832..24a7865 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -78,6 +78,7 @@
static int acpi_button_add(struct acpi_device *device);
static int acpi_button_remove(struct acpi_device *device, int type);
+static int acpi_button_resume(struct acpi_device *device);
static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
@@ -87,6 +88,7 @@
.ids = button_device_ids,
.ops = {
.add = acpi_button_add,
+ .resume = acpi_button_resume,
.remove = acpi_button_remove,
},
};
@@ -253,6 +255,19 @@
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
+static int acpi_lid_send_state(struct acpi_button *button)
+{
+ unsigned long state;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
+ &state);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ /* input layer checks if event is redundant */
+ input_report_switch(button->input, SW_LID, !state);
+ return 0;
+}
static void acpi_button_notify(acpi_handle handle, u32 event, void *data)
{
@@ -265,15 +280,8 @@
switch (event) {
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
-
if (button->type == ACPI_BUTTON_TYPE_LID) {
- struct acpi_handle *handle = button->device->handle;
- unsigned long state;
-
- if (!ACPI_FAILURE(acpi_evaluate_integer(handle, "_LID",
- NULL, &state)))
- input_report_switch(input, SW_LID, !state);
-
+ acpi_lid_send_state(button);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
@@ -336,6 +344,17 @@
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
+static int acpi_button_resume(struct acpi_device *device)
+{
+ struct acpi_button *button;
+ if (!device)
+ return -EINVAL;
+ button = acpi_driver_data(device);
+ if (button && button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(button);
+ return 0;
+}
+
static void acpi_button_remove_notify_handlers(struct acpi_button *button)
{
switch (button->type) {
@@ -453,6 +472,8 @@
error = input_register_device(input);
if (error)
goto err_remove_handlers;
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ acpi_lid_send_state(button);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 7b41783..06b78e5 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -65,16 +65,18 @@
/* EC events */
enum ec_event {
ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */
- ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
+ ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
};
#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
-static enum ec_mode {
- EC_INTR = 1, /* Output buffer full */
- EC_POLL, /* Input buffer empty */
-} acpi_ec_mode = EC_INTR;
+enum {
+ EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */
+ EC_FLAGS_QUERY_PENDING, /* Query is pending */
+ EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */
+ EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */
+};
static int acpi_ec_remove(struct acpi_device *device, int type);
static int acpi_ec_start(struct acpi_device *device);
@@ -116,9 +118,8 @@
unsigned long command_addr;
unsigned long data_addr;
unsigned long global_lock;
+ unsigned long flags;
struct mutex lock;
- atomic_t query_pending;
- atomic_t event_count;
wait_queue_head_t wait;
struct list_head list;
u8 handlers_installed;
@@ -148,45 +149,54 @@
outb(data, ec->data_addr);
}
-static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event,
- unsigned old_count)
+static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
{
- u8 status = acpi_ec_read_status(ec);
- if (old_count == atomic_read(&ec->event_count))
+ if (test_bit(EC_FLAGS_WAIT_GPE, &ec->flags))
return 0;
if (event == ACPI_EC_EVENT_OBF_1) {
- if (status & ACPI_EC_FLAG_OBF)
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_OBF)
return 1;
} else if (event == ACPI_EC_EVENT_IBF_0) {
- if (!(status & ACPI_EC_FLAG_IBF))
+ if (!(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
return 1;
}
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event,
- unsigned count, int force_poll)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
- if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) {
- unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
- while (time_before(jiffies, delay)) {
- if (acpi_ec_check_status(ec, event, 0))
- return 0;
+ if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
+ likely(!force_poll)) {
+ if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
+ msecs_to_jiffies(ACPI_EC_DELAY)))
+ return 0;
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ if (acpi_ec_check_status(ec, event)) {
+ if (event == ACPI_EC_EVENT_OBF_1) {
+ /* miss OBF = 1 GPE, don't expect it anymore */
+ printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
+ "switching to degraded mode.\n");
+ set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+ } else {
+ /* missing GPEs, switch back to poll mode */
+ printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
+ "switch off interrupt mode.\n");
+ clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+ }
+ return 0;
}
} else {
- if (wait_event_timeout(ec->wait,
- acpi_ec_check_status(ec, event, count),
- msecs_to_jiffies(ACPI_EC_DELAY)) ||
- acpi_ec_check_status(ec, event, 0)) {
- return 0;
- } else {
- printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
- " status = %d, expect_event = %d\n",
- acpi_ec_read_status(ec), event);
+ unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ while (time_before(jiffies, delay)) {
+ if (acpi_ec_check_status(ec, event))
+ return 0;
}
}
-
+ printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+ " status = %d, expect_event = %d\n",
+ acpi_ec_read_status(ec), event);
return -ETIME;
}
@@ -196,39 +206,42 @@
int force_poll)
{
int result = 0;
- unsigned count = atomic_read(&ec->event_count);
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
- count = atomic_read(&ec->event_count);
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
goto end;
}
- } else if (command == ACPI_EC_COMMAND_QUERY) {
- atomic_set(&ec->query_pending, 0);
- }
+ } else if (command == ACPI_EC_COMMAND_QUERY)
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
for (; rdata_len > 0; --rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count, force_poll);
+ if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
+ force_poll = 1;
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
goto end;
}
- count = atomic_read(&ec->event_count);
+ /* Don't expect GPE after last read */
+ if (rdata_len > 1)
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
*(rdata++) = acpi_ec_read_data(ec);
}
end:
@@ -258,10 +271,7 @@
}
}
- /* Make sure GPE is enabled before doing transaction */
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
+ status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
printk(KERN_ERR PREFIX
"input buffer is not empty, aborting transaction\n");
@@ -435,9 +445,9 @@
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
- struct acpi_ec_query_handler *handler;
+ struct acpi_ec_query_handler *handler, *tmp;
mutex_lock(&ec->lock);
- list_for_each_entry(handler, &ec->list, node) {
+ list_for_each_entry_safe(handler, tmp, &ec->list, node) {
if (query_bit == handler->query_bit) {
list_del(&handler->node);
kfree(handler);
@@ -476,23 +486,24 @@
static u32 acpi_ec_gpe_handler(void *data)
{
acpi_status status = AE_OK;
- u8 value;
struct acpi_ec *ec = data;
- atomic_inc(&ec->event_count);
-
- if (acpi_ec_mode == EC_INTR) {
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
+
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_SCI) {
+ if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
+ status = acpi_os_execute(OSL_EC_BURST_HANDLER,
+ acpi_ec_gpe_query, ec);
+ } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
+ /* this is non-query, must be confirmation */
+ printk(KERN_INFO PREFIX "non-query interrupt received,"
+ " switching to interrupt mode\n");
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
- value = acpi_ec_read_status(ec);
- if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
- atomic_set(&ec->query_pending, 1);
- status =
- acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
- }
-
- return status == AE_OK ?
+ return ACPI_SUCCESS(status) ?
ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
}
@@ -641,13 +652,10 @@
struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec)
return NULL;
-
- atomic_set(&ec->query_pending, 1);
- atomic_set(&ec->event_count, 1);
+ ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
mutex_init(&ec->lock);
init_waitqueue_head(&ec->wait);
INIT_LIST_HEAD(&ec->list);
-
return ec;
}
@@ -741,6 +749,8 @@
acpi_ec_add_fs(device);
printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
+ printk(KERN_INFO PREFIX "driver started in %s mode\n",
+ (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
return 0;
}
@@ -833,7 +843,7 @@
ret = ec_install_handlers(ec);
/* EC is fully operational, allow queries */
- atomic_set(&ec->query_pending, 0);
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
return ret;
}
@@ -924,20 +934,4 @@
return;
}
-#endif /* 0 */
-
-static int __init acpi_ec_set_intr_mode(char *str)
-{
- int intr;
-
- if (!get_option(&str, &intr))
- return 0;
-
- acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
-
- printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
-
- return 1;
-}
-
-__setup("ec_intr=", acpi_ec_set_intr_mode);
+#endif /* 0 */
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index c81f6bd..a5a5532 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -47,8 +47,6 @@
static int acpi_fan_add(struct acpi_device *device);
static int acpi_fan_remove(struct acpi_device *device, int type);
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
-static int acpi_fan_resume(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
@@ -63,15 +61,9 @@
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
- .suspend = acpi_fan_suspend,
- .resume = acpi_fan_resume,
},
};
-struct acpi_fan {
- struct acpi_device * device;
-};
-
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
@@ -80,12 +72,12 @@
static int acpi_fan_read_state(struct seq_file *seq, void *offset)
{
- struct acpi_fan *fan = seq->private;
+ struct acpi_device *device = seq->private;
int state = 0;
- if (fan) {
- if (acpi_bus_get_power(fan->device->handle, &state))
+ if (device) {
+ if (acpi_bus_get_power(device->handle, &state))
seq_printf(seq, "status: ERROR\n");
else
seq_printf(seq, "status: %s\n",
@@ -105,11 +97,10 @@
{
int result = 0;
struct seq_file *m = file->private_data;
- struct acpi_fan *fan = m->private;
+ struct acpi_device *device = m->private;
char state_string[12] = { '\0' };
-
- if (!fan || (count > sizeof(state_string) - 1))
+ if (count > sizeof(state_string) - 1)
return -EINVAL;
if (copy_from_user(state_string, buffer, count))
@@ -117,7 +108,7 @@
state_string[count] = '\0';
- result = acpi_bus_set_power(fan->device->handle,
+ result = acpi_bus_set_power(device->handle,
simple_strtoul(state_string, NULL, 0));
if (result)
return result;
@@ -158,7 +149,7 @@
return -ENODEV;
else {
entry->proc_fops = &acpi_fan_state_ops;
- entry->data = acpi_driver_data(device);
+ entry->data = device;
entry->owner = THIS_MODULE;
}
@@ -191,14 +182,8 @@
if (!device)
return -EINVAL;
- fan = kzalloc(sizeof(struct acpi_fan), GFP_KERNEL);
- if (!fan)
- return -ENOMEM;
-
- fan->device = device;
strcpy(acpi_device_name(device), "Fan");
strcpy(acpi_device_class(device), ACPI_FAN_CLASS);
- acpi_driver_data(device) = fan;
result = acpi_bus_get_power(device->handle, &state);
if (result) {
@@ -206,10 +191,6 @@
goto end;
}
- device->flags.force_power_state = 1;
- acpi_bus_set_power(device->handle, state);
- device->flags.force_power_state = 0;
-
result = acpi_fan_add_fs(device);
if (result)
goto end;
@@ -227,53 +208,14 @@
static int acpi_fan_remove(struct acpi_device *device, int type)
{
- struct acpi_fan *fan = NULL;
-
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fan = acpi_driver_data(device);
-
acpi_fan_remove_fs(device);
- kfree(fan);
-
return 0;
}
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state)
-{
- if (!device)
- return -EINVAL;
-
- acpi_bus_set_power(device->handle, ACPI_STATE_D0);
-
- return AE_OK;
-}
-
-static int acpi_fan_resume(struct acpi_device *device)
-{
- int result = 0;
- int power_state = 0;
-
- if (!device)
- return -EINVAL;
-
- result = acpi_bus_get_power(device->handle, &power_state);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading fan power state\n"));
- return result;
- }
-
- device->flags.force_power_state = 1;
- acpi_bus_set_power(device->handle, power_state);
- device->flags.force_power_state = 0;
-
- return result;
-}
-
static int __init acpi_fan_init(void)
{
int result = 0;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 57b9a29..af1769a 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -86,7 +86,6 @@
acpi_bus_id name;
u32 system_level;
u32 order;
- int state;
struct mutex resource_lock;
struct list_head reference;
};
@@ -128,33 +127,31 @@
return 0;
}
-static int acpi_power_get_state(struct acpi_power_resource *resource)
+static int acpi_power_get_state(struct acpi_power_resource *resource, int *state)
{
acpi_status status = AE_OK;
unsigned long sta = 0;
- if (!resource)
+ if (!resource || !state)
return -EINVAL;
status = acpi_evaluate_integer(resource->device->handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status))
return -ENODEV;
- if (sta & 0x01)
- resource->state = ACPI_POWER_RESOURCE_STATE_ON;
- else
- resource->state = ACPI_POWER_RESOURCE_STATE_OFF;
+ *state = (sta & 0x01)?ACPI_POWER_RESOURCE_STATE_ON:
+ ACPI_POWER_RESOURCE_STATE_OFF;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
- resource->name, resource->state ? "on" : "off"));
+ resource->name, state ? "on" : "off"));
return 0;
}
static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
{
- int result = 0;
+ int result = 0, state1;
struct acpi_power_resource *resource = NULL;
u32 i = 0;
@@ -168,11 +165,11 @@
result = acpi_power_get_context(list->handles[i], &resource);
if (result)
return result;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state1);
if (result)
return result;
- *state = resource->state;
+ *state = state1;
if (*state != ACPI_POWER_RESOURCE_STATE_ON)
break;
@@ -186,7 +183,7 @@
static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0;
+ int result = 0, state;
int found = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
@@ -224,20 +221,14 @@
}
mutex_unlock(&resource->resource_lock);
- if (resource->state == ACPI_POWER_RESOURCE_STATE_ON) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already on\n",
- resource->name));
- return 0;
- }
-
status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
- if (resource->state != ACPI_POWER_RESOURCE_STATE_ON)
+ if (state != ACPI_POWER_RESOURCE_STATE_ON)
return -ENOEXEC;
/* Update the power resource's _device_ power state */
@@ -250,7 +241,7 @@
static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0;
+ int result = 0, state;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
@@ -281,20 +272,14 @@
}
mutex_unlock(&resource->resource_lock);
- if (resource->state == ACPI_POWER_RESOURCE_STATE_OFF) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already off\n",
- resource->name));
- return 0;
- }
-
status = acpi_evaluate_object(resource->device->handle, "_OFF", NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
- if (resource->state != ACPI_POWER_RESOURCE_STATE_OFF)
+ if (state != ACPI_POWER_RESOURCE_STATE_OFF)
return -ENOEXEC;
/* Update the power resource's _device_ power state */
@@ -494,7 +479,7 @@
static int acpi_power_seq_show(struct seq_file *seq, void *offset)
{
int count = 0;
- int result = 0;
+ int result = 0, state;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
struct acpi_power_reference *ref;
@@ -505,12 +490,12 @@
if (!resource)
goto end;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
goto end;
seq_puts(seq, "state: ");
- switch (resource->state) {
+ switch (state) {
case ACPI_POWER_RESOURCE_STATE_ON:
seq_puts(seq, "on\n");
break;
@@ -591,7 +576,7 @@
static int acpi_power_add(struct acpi_device *device)
{
- int result = 0;
+ int result = 0, state;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
union acpi_object acpi_object;
@@ -622,11 +607,11 @@
resource->system_level = acpi_object.power_resource.system_level;
resource->order = acpi_object.power_resource.resource_order;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
goto end;
- switch (resource->state) {
+ switch (state) {
case ACPI_POWER_RESOURCE_STATE_ON:
device->power.state = ACPI_STATE_D0;
break;
@@ -643,7 +628,7 @@
goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device),
- acpi_device_bid(device), resource->state ? "on" : "off");
+ acpi_device_bid(device), state ? "on" : "off");
end:
if (result)
@@ -680,7 +665,7 @@
static int acpi_power_resume(struct acpi_device *device)
{
- int result = 0;
+ int result = 0, state;
struct acpi_power_resource *resource = NULL;
struct acpi_power_reference *ref;
@@ -689,12 +674,12 @@
resource = (struct acpi_power_resource *)acpi_driver_data(device);
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
mutex_lock(&resource->resource_lock);
- if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
+ if (state == ACPI_POWER_RESOURCE_STATE_OFF &&
!list_empty(&resource->reference)) {
ref = container_of(resource->reference.next, struct acpi_power_reference, node);
mutex_unlock(&resource->resource_lock);
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index f3d3867..2c0b663 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -167,8 +167,8 @@
{
u32 acpi_state = acpi_target_sleep_state;
- acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -272,8 +272,8 @@
* enable it here.
*/
acpi_enable();
- acpi_leave_sleep_state(ACPI_STATE_S4);
acpi_disable_wakeup_device(ACPI_STATE_S4);
+ acpi_leave_sleep_state(ACPI_STATE_S4);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -410,6 +410,7 @@
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk("%s called\n", __FUNCTION__);
local_irq_disable();
+ acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 63035d7..164c7d9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -704,8 +704,8 @@
/**
* ata_dev_enable_pm - enable SATA interface power management
- * @device - device to enable ipm for
- * @policy - the link power management policy
+ * @dev: device to enable power management
+ * @policy: the link power management policy
*
* Enable SATA Interface power management. This will enable
* Device Interface Power Management (DIPM) for min_power
@@ -735,9 +735,10 @@
return /* rc */; /* hopefully we can use 'rc' eventually */
}
+#ifdef CONFIG_PM
/**
* ata_dev_disable_pm - disable SATA interface power management
- * @device - device to enable ipm for
+ * @dev: device to disable power management
*
* Disable SATA Interface power management. This will disable
* Device Interface Power Management (DIPM) without changing
@@ -755,6 +756,7 @@
if (ap->ops->disable_pm)
ap->ops->disable_pm(ap);
}
+#endif /* CONFIG_PM */
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
@@ -764,6 +766,7 @@
ata_port_schedule_eh(ap);
}
+#ifdef CONFIG_PM
static void ata_lpm_enable(struct ata_host *host)
{
struct ata_link *link;
@@ -789,6 +792,7 @@
ata_lpm_schedule(ap, ap->pm_policy);
}
}
+#endif /* CONFIG_PM */
/**
@@ -2300,6 +2304,10 @@
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if ((dev->class == ATA_DEV_ATAPI) &&
+ (atapi_command_packet_set(id) == TYPE_TAPE))
+ dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
@@ -2743,17 +2751,27 @@
static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
{
- u32 spd, limit;
+ struct ata_link *host_link = &link->ap->link;
+ u32 limit, target, spd;
- if (link->sata_spd_limit == UINT_MAX)
- limit = 0;
+ limit = link->sata_spd_limit;
+
+ /* Don't configure downstream link faster than upstream link.
+ * It doesn't speed up anything and some PMPs choke on such
+ * configuration.
+ */
+ if (!ata_is_host_link(link) && host_link->sata_spd)
+ limit &= (1 << host_link->sata_spd) - 1;
+
+ if (limit == UINT_MAX)
+ target = 0;
else
- limit = fls(link->sata_spd_limit);
+ target = fls(limit);
spd = (*scontrol >> 4) & 0xf;
- *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4);
+ *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
- return spd != limit;
+ return spd != target;
}
/**
@@ -2776,7 +2794,7 @@
u32 scontrol;
if (sata_scr_read(link, SCR_CONTROL, &scontrol))
- return 0;
+ return 1;
return __sata_set_spd_needed(link, &scontrol);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index fefea74..ed8813b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1747,6 +1747,7 @@
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev;
unsigned int all_err_mask = 0;
int tag, is_io = 0;
u32 serror;
@@ -1800,10 +1801,8 @@
qc->err_mask &= ~AC_ERR_OTHER;
/* SENSE_VALID trumps dev/unknown error and revalidation */
- if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
- ehc->i.action &= ~ATA_EH_REVALIDATE;
- }
/* accumulate error info */
ehc->i.dev = qc->dev;
@@ -1816,21 +1815,28 @@
if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
ehc->i.action |= ATA_EH_SOFTRESET;
- else if (all_err_mask)
+ else if ((is_io && all_err_mask) ||
+ (!is_io && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
- /* if we have offending qcs and the associated failed device */
+ /* If we have offending qcs and the associated failed device,
+ * perform per-dev EH action only on the offending device.
+ */
if (ehc->i.dev) {
- /* speed down */
- ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io,
- all_err_mask);
-
- /* perform per-dev EH action only on the offending device */
ehc->i.dev_action[ehc->i.dev->devno] |=
ehc->i.action & ATA_EH_PERDEV_MASK;
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
+ /* consider speeding down */
+ dev = ehc->i.dev;
+ if (!dev && ata_link_max_devices(link) == 1 &&
+ ata_dev_enabled(link->device))
+ dev = link->device;
+
+ if (dev)
+ ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
+
DPRINTK("EXIT\n");
}
@@ -1879,7 +1885,9 @@
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link)
+ if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link ||
+ ((qc->flags & ATA_QCFLAG_QUIET) &&
+ qc->err_mask == AC_ERR_DEV))
continue;
if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
continue;
@@ -2064,16 +2072,19 @@
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
+ const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts);
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
unsigned int *classes = ehc->classes;
+ unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
int try = 0;
struct ata_device *dev;
- unsigned long deadline;
+ unsigned long deadline, now;
unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
+ u32 sstatus;
int rc;
/* about to reset */
@@ -2105,7 +2116,7 @@
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
- if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) &&
+ if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
!sata_set_spd_needed(link) &&
!(ehc->i.action & ATA_EH_HARDRESET))))
tmp_action = ATA_EH_SOFTRESET;
@@ -2180,82 +2191,64 @@
"follow-up softreset required "
"but no softreset avaliable\n");
rc = -EINVAL;
- goto out;
+ goto fail;
}
ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
rc = ata_do_reset(link, reset, classes, deadline);
+ }
- if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN &&
- !(link->flags & ATA_LFLAG_ASSUME_CLASS)) {
- ata_link_printk(link, KERN_ERR,
+ /* -EAGAIN can happen if we skipped followup SRST */
+ if (rc && rc != -EAGAIN)
+ goto fail;
+
+ /* was classification successful? */
+ if (classify && classes[0] == ATA_DEV_UNKNOWN &&
+ !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
+ if (try < max_tries) {
+ ata_link_printk(link, KERN_WARNING,
"classification failed\n");
rc = -EINVAL;
- goto out;
- }
- }
-
- /* if we skipped follow-up srst, clear rc */
- if (rc == -EAGAIN)
- rc = 0;
-
- if (rc && rc != -ERESTART && try < ARRAY_SIZE(ata_eh_reset_timeouts)) {
- unsigned long now = jiffies;
-
- if (time_before(now, deadline)) {
- unsigned long delta = deadline - jiffies;
-
- ata_link_printk(link, KERN_WARNING, "reset failed "
- "(errno=%d), retrying in %u secs\n",
- rc, (jiffies_to_msecs(delta) + 999) / 1000);
-
- while (delta)
- delta = schedule_timeout_uninterruptible(delta);
+ goto fail;
}
- if (rc == -EPIPE ||
- try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1)
- sata_down_spd_limit(link);
- if (hardreset)
- reset = hardreset;
- goto retry;
+ ata_link_printk(link, KERN_WARNING,
+ "classfication failed, assuming ATA\n");
+ lflags |= ATA_LFLAG_ASSUME_ATA;
}
- if (rc == 0) {
- u32 sstatus;
+ ata_link_for_each_dev(dev, link) {
+ /* After the reset, the device state is PIO 0 and the
+ * controller state is undefined. Reset also wakes up
+ * drives from sleeping mode.
+ */
+ dev->pio_mode = XFER_PIO_0;
+ dev->flags &= ~ATA_DFLAG_SLEEPING;
- ata_link_for_each_dev(dev, link) {
- /* After the reset, the device state is PIO 0
- * and the controller state is undefined.
- * Reset also wakes up drives from sleeping
- * mode.
- */
- dev->pio_mode = XFER_PIO_0;
- dev->flags &= ~ATA_DFLAG_SLEEPING;
+ if (ata_link_offline(link))
+ continue;
- if (ata_link_offline(link))
- continue;
-
- /* apply class override and convert UNKNOWN to NONE */
- if (link->flags & ATA_LFLAG_ASSUME_ATA)
- classes[dev->devno] = ATA_DEV_ATA;
- else if (link->flags & ATA_LFLAG_ASSUME_SEMB)
- classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
- else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
- }
-
- /* record current link speed */
- if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
- link->sata_spd = (sstatus >> 4) & 0xf;
-
- if (postreset)
- postreset(link, classes);
-
- /* reset successful, schedule revalidation */
- ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
- ehc->i.action |= ATA_EH_REVALIDATE;
+ /* apply class override and convert UNKNOWN to NONE */
+ if (lflags & ATA_LFLAG_ASSUME_ATA)
+ classes[dev->devno] = ATA_DEV_ATA;
+ else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+ classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
+ else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
}
+
+ /* record current link speed */
+ if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
+ link->sata_spd = (sstatus >> 4) & 0xf;
+
+ if (postreset)
+ postreset(link, classes);
+
+ /* reset successful, schedule revalidation */
+ ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ehc->i.action |= ATA_EH_REVALIDATE;
+
+ rc = 0;
out:
/* clear hotplug flag */
ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
@@ -2265,6 +2258,28 @@
spin_unlock_irqrestore(ap->lock, flags);
return rc;
+
+ fail:
+ if (rc == -ERESTART || try >= max_tries)
+ goto out;
+
+ now = jiffies;
+ if (time_before(now, deadline)) {
+ unsigned long delta = deadline - now;
+
+ ata_link_printk(link, KERN_WARNING, "reset failed "
+ "(errno=%d), retrying in %u secs\n",
+ rc, (jiffies_to_msecs(delta) + 999) / 1000);
+
+ while (delta)
+ delta = schedule_timeout_uninterruptible(delta);
+ }
+
+ if (rc == -EPIPE || try == max_tries - 1)
+ sata_down_spd_limit(link);
+ if (hardreset)
+ reset = hardreset;
+ goto retry;
}
static int ata_eh_revalidate_and_attach(struct ata_link *link,
@@ -2697,8 +2712,15 @@
/* FIXME: Once EH migration is complete,
* generate sense data in this function,
* considering both err_mask and tf.
+ *
+ * There's no point in retrying invalid
+ * (detected by libata) and non-IO device
+ * errors (rejected by device). Finish them
+ * immediately.
*/
- if (qc->err_mask & AC_ERR_INVALID)
+ if ((qc->err_mask & AC_ERR_INVALID) ||
+ (!(qc->flags & ATA_QCFLAG_IO) &&
+ qc->err_mask == AC_ERR_DEV))
ata_eh_qc_complete(qc);
else
ata_eh_qc_retry(qc);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 93bd36c..245057d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -120,7 +120,7 @@
{ MEDIUM_POWER, "medium_power" },
};
-const char *ata_scsi_lpm_get(enum link_pm policy)
+static const char *ata_scsi_lpm_get(enum link_pm policy)
{
int i;
@@ -1108,6 +1108,9 @@
else
tf->command = ATA_CMD_FLUSH;
+ /* flush is critical for IO integrity, consider it an IO command */
+ qc->flags |= ATA_QCFLAG_IO;
+
return 0;
}
@@ -2764,8 +2767,8 @@
*/
qc->nbytes = scsi_bufflen(scmd);
- /* request result TF */
- qc->flags |= ATA_QCFLAG_RESULT_TF;
+ /* request result TF and be quiet about device error */
+ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
return 0;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index b4c37b9..d015b4a 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,8 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY),
+ ATA_FLAG_NCQ),
+ SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -264,10 +265,11 @@
void __iomem *hcr_base;
void __iomem *ssr_base;
void __iomem *csr_base;
+ int irq;
};
static inline unsigned int sata_fsl_tag(unsigned int tag,
- void __iomem * hcr_base)
+ void __iomem *hcr_base)
{
/* We let libATA core do actual (queue) tag allocation */
@@ -306,7 +308,7 @@
pp->cmdslot[tag].prde_fis_len =
cpu_to_le32((num_prde << 16) | (fis_len << 2));
pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
- pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F)));
+ pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
pp->cmdslot[tag].cda,
@@ -316,7 +318,7 @@
}
static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
- u32 * ttl, dma_addr_t cmd_desc_paddr)
+ u32 *ttl, dma_addr_t cmd_desc_paddr)
{
struct scatterlist *sg;
unsigned int num_prde = 0;
@@ -353,7 +355,7 @@
"s/g len unaligned : 0x%x\n", sg_len);
if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
- !ata_sg_is_last(sg, qc)) {
+ (qc->n_iter + 1 != qc->n_elem)) {
VPRINTK("setting indirect prde\n");
prd_ptr_to_indirect_ext = prd;
prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
@@ -404,7 +406,7 @@
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis);
+ ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -470,16 +472,10 @@
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
@@ -487,7 +483,7 @@
VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
- iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4));
+ iowrite32(val, ssr_base + (sc_reg * 4));
return 0;
}
@@ -500,16 +496,10 @@
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
@@ -517,7 +507,7 @@
VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
- *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4));
+ *val = ioread32(ssr_base + (sc_reg * 4));
return 0;
}
@@ -571,7 +561,6 @@
struct ata_port *ap)
{
struct sata_fsl_port_priv *pp = ap->private_data;
- u8 fis[6 * 4];
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
@@ -579,8 +568,7 @@
cd = pp->cmdentry + tag;
- memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */
- ata_tf_from_fis(fis, &pp->tf);
+ ata_tf_from_fis(cd->sfis, &pp->tf);
}
static u8 sata_fsl_check_status(struct ata_port *ap)
@@ -664,6 +652,7 @@
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
+#ifdef CONFIG_MPC8315_DS
/*
* Workaround for 8315DS board 3gbps link-up issue,
* currently limit SATA port to GEN1 speed
@@ -676,6 +665,7 @@
sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
+#endif
return 0;
}
@@ -728,9 +718,10 @@
return ata_dev_classify(&tf);
}
-static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class,
+static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
@@ -739,10 +730,6 @@
u8 *cfis;
u32 Serror;
int i = 0;
- struct ata_queued_cmd qc;
- u8 *buf;
- dma_addr_t dma_address;
- struct scatterlist *sg;
unsigned long start_jiffies;
DPRINTK("in xx_softreset\n");
@@ -811,7 +798,7 @@
*/
temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
- if ((!(temp & 0x10)) || ata_port_offline(ap)) {
+ if ((!(temp & 0x10)) || ata_link_offline(link)) {
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
@@ -842,13 +829,10 @@
* reached here, we can send a command to the target device
*/
- if (ap->sactive)
- goto skip_srst_do_ncq_error_handling;
-
DPRINTK("Sending SRST/device reset\n");
- ata_tf_init(ap->device, &tf);
- cfis = (u8 *) & pp->cmdentry->cfis;
+ ata_tf_init(link->device, &tf);
+ cfis = (u8 *) &pp->cmdentry->cfis;
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
@@ -912,76 +896,13 @@
* command bit of the CCreg
*/
iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
- goto check_device_signature;
-
-skip_srst_do_ncq_error_handling:
-
- VPRINTK("Sending read log ext(10h) command\n");
-
- memset(&qc, 0, sizeof(struct ata_queued_cmd));
- ata_tf_init(ap->device, &tf);
-
- tf.command = ATA_CMD_READ_LOG_EXT;
- tf.lbal = ATA_LOG_SATA_NCQ;
- tf.nsect = 1;
- tf.hob_nsect = 0;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_PIO;
-
- qc.tag = ATA_TAG_INTERNAL;
- qc.scsicmd = NULL;
- qc.ap = ap;
- qc.dev = ap->device;
-
- qc.tf = tf;
- qc.flags |= ATA_QCFLAG_RESULT_TF;
- qc.dma_dir = DMA_FROM_DEVICE;
-
- buf = ap->sector_buf;
- ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
-
- /*
- * Need to DMA-map the memory buffer associated with the command
- */
-
- sg = qc.__sg;
- dma_address = dma_map_single(ap->dev, qc.buf_virt,
- sg->length, DMA_FROM_DEVICE);
-
- sg_dma_address(sg) = dma_address;
- sg_dma_len(sg) = sg->length;
-
- VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
-
- sata_fsl_qc_prep(&qc);
- sata_fsl_qc_issue(&qc);
-
- temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
- if (temp & 0x1) {
- VPRINTK("READ_LOG_EXT_10H issue failed\n");
-
- VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
- ioread32(CQ + hcr_base),
- ioread32(CA + hcr_base), ioread32(CC + hcr_base));
-
- sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
-
- VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
- VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
- VPRINTK("Serror = 0x%x\n", Serror);
- goto err;
- }
-
- iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-
- check_device_signature:
DPRINTK("SATA FSL : Now checking device signature\n");
*class = ATA_DEV_NONE;
/* Verify if SStatus indicates device presence */
- if (ata_port_online(ap)) {
+ if (ata_link_online(link)) {
/*
* if we are here, device presence has been detected,
* 1st D2H FIS would have been received, but sfis in
@@ -1002,25 +923,13 @@
return -EIO;
}
-static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
-{
- int retval;
-
- retval = sata_std_hardreset(ap, class, deadline);
-
- DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval);
-
- return retval;
-}
-
static void sata_fsl_error_handler(struct ata_port *ap)
{
DPRINTK("in xx_error_handler\n");
/* perform recovery */
- ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset,
+ ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
ata_std_postreset);
}
@@ -1042,7 +951,8 @@
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->eh_info;
+ struct ata_link *link = &ap->link;
+ struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, dereg, cereg = 0, SError = 0;
@@ -1111,7 +1021,7 @@
}
/* record error info */
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
if (qc) {
sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
@@ -1139,6 +1049,7 @@
static void sata_fsl_host_intr(struct ata_port *ap)
{
+ struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
@@ -1161,7 +1072,7 @@
return;
}
- if (ap->sactive) { /* only true for NCQ commands */
+ if (link->sactive) { /* only true for NCQ commands */
int i;
/* Read command completed register */
qc_active = ioread32(hcr_base + CC);
@@ -1190,10 +1101,10 @@
} else if (ap->qc_active) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- ap->active_tag, ioread32(hcr_base + CC));
+ link->active_tag, ioread32(hcr_base + CC));
if (qc) {
sata_fsl_qc_complete(qc);
@@ -1312,15 +1223,9 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sata_fsl_ops = {
- .port_disable = ata_port_disable,
-
.check_status = sata_fsl_check_status,
.check_altstatus = sata_fsl_check_status,
.dev_select = ata_noop_dev_select,
@@ -1330,8 +1235,6 @@
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.irq_clear = sata_fsl_irq_clear,
- .irq_on = ata_dummy_irq_on,
- .irq_ack = ata_dummy_irq_ack,
.scr_read = sata_fsl_scr_read,
.scr_write = sata_fsl_scr_write,
@@ -1348,6 +1251,7 @@
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
+ .link_flags = SATA_FSL_HOST_LFLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.udma_mask = 0x7f, /* udma 0-6 */
.port_ops = &sata_fsl_ops,
@@ -1398,6 +1302,7 @@
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
+ host_priv->irq = irq;
/* allocate host structure */
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
@@ -1444,7 +1349,7 @@
dev_set_drvdata(&ofdev->dev, NULL);
- irq_dispose_mapping(host->irq);
+ irq_dispose_mapping(host_priv->irq);
iounmap(host_priv->hcr_base);
kfree(host_priv);
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index deb26f0..7914def 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -2,6 +2,7 @@
* sata_promise.c - Promise SATA
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Mikael Pettersson <mikpe@it.uu.se>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
@@ -45,11 +46,12 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.10"
+#define DRV_VERSION "2.11"
enum {
PDC_MAX_PORTS = 4,
PDC_MMIO_BAR = 3,
+ PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */
/* register offsets */
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
@@ -157,7 +159,7 @@
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = PDC_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -240,7 +242,7 @@
};
static const struct ata_port_info pdc_port_info[] = {
- /* board_2037x */
+ [board_2037x] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_SATA_PATA,
@@ -250,7 +252,7 @@
.port_ops = &pdc_old_sata_ops,
},
- /* board_2037x_pata */
+ [board_2037x_pata] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
@@ -259,7 +261,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_20319 */
+ [board_20319] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_4_PORTS,
@@ -269,7 +271,7 @@
.port_ops = &pdc_old_sata_ops,
},
- /* board_20619 */
+ [board_20619] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
PDC_FLAG_4_PORTS,
@@ -279,7 +281,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_2057x */
+ [board_2057x] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
@@ -289,7 +291,7 @@
.port_ops = &pdc_sata_ops,
},
- /* board_2057x_pata */
+ [board_2057x_pata] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
PDC_FLAG_GEN_II,
@@ -299,7 +301,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_40518 */
+ [board_40518] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
@@ -523,6 +525,84 @@
memcpy(buf+31, cdb, cdb_len);
}
+/**
+ * pdc_fill_sg - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ * Make sure hardware does not choke on it.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void pdc_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg;
+ unsigned int idx;
+ const u32 SG_COUNT_ASIC_BUG = 41*4;
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ WARN_ON(qc->__sg == NULL);
+ WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+
+ idx = 0;
+ ata_for_each_sg(sg, qc) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+ idx++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ if (idx) {
+ u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len);
+
+ if (len > SG_COUNT_ASIC_BUG) {
+ u32 addr;
+
+ VPRINTK("Splitting last PRD.\n");
+
+ addr = le32_to_cpu(ap->prd[idx - 1].addr);
+ ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
+
+ addr = addr + len - SG_COUNT_ASIC_BUG;
+ len = SG_COUNT_ASIC_BUG;
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[idx].flags_len = cpu_to_le32(len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+ idx++;
+ }
+
+ ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ }
+}
+
static void pdc_qc_prep(struct ata_queued_cmd *qc)
{
struct pdc_port_priv *pp = qc->ap->private_data;
@@ -532,7 +612,7 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
/* fall through */
case ATA_PROT_NODATA:
@@ -548,11 +628,11 @@
break;
case ATA_PROT_ATAPI:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
break;
case ATA_PROT_ATAPI_DMA:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
/*FALLTHROUGH*/
case ATA_PROT_ATAPI_NODATA:
pdc_atapi_pkt(qc);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 3c481e0..187dcb0 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -265,11 +265,11 @@
unsigned int err_mask, action;
const char *desc;
} sil24_cerr_db[] = {
- [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [0] = { AC_ERR_DEV, 0,
"device error" },
- [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [PORT_CERR_DEV] = { AC_ERR_DEV, 0,
"device error via D2H FIS" },
- [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [PORT_CERR_SDB] = { AC_ERR_DEV, 0,
"device error via SDB FIS" },
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
"error in data FIS" },
diff --git a/drivers/base/core.c b/drivers/base/core.c
index c134341..3f4d6aa 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1228,18 +1228,18 @@
sysfs_remove_link(&dev->parent->kobj, old_class_name);
}
}
-#endif
-
+#else
if (dev->class) {
sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
if (error) {
- /* Uh... how to unravel this if restoring can fail? */
dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
__FUNCTION__, error);
}
}
+#endif
+
out:
put_device(dev);
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index f22c253..ccb1fa8 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -56,9 +56,9 @@
X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64
- tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU
+ tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
depends on AGP && X86
- default y if IOMMU
+ default y if GART_IOMMU
help
This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d95662e..d8200ac 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -787,7 +787,7 @@
/* On AMD64 the PCI driver needs to initialize this driver early
for the IOMMU, so it has to be called via a backdoor. */
-#ifndef CONFIG_IOMMU
+#ifndef CONFIG_GART_IOMMU
module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup);
#endif
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 0e328d3..6883fcb 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -218,7 +218,7 @@
skb->len < nlh->nlmsg_len ||
nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) {
kfree_skb(skb);
- goto out;
+ return;
}
len = NLMSG_ALIGN(nlh->nlmsg_len);
@@ -229,9 +229,6 @@
if (err < 0)
kfree_skb(skb);
}
-
-out:
- kfree_skb(__skb);
}
/*
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index fdf4106..d2fabe7 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -19,7 +19,6 @@
#include "cpuidle.h"
DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
-EXPORT_PER_CPU_SYMBOL_GPL(cpuidle_devices);
DEFINE_MUTEX(cpuidle_lock);
LIST_HEAD(cpuidle_detected_devices);
diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c
index bb699cb2..70b5964 100644
--- a/drivers/cpuidle/governor.c
+++ b/drivers/cpuidle/governor.c
@@ -94,8 +94,6 @@
return ret;
}
-EXPORT_SYMBOL_GPL(cpuidle_register_governor);
-
/**
* cpuidle_replace_governor - find a replacement governor
* @exclude_rating: the rating that will be skipped while looking for
@@ -138,4 +136,3 @@
mutex_unlock(&cpuidle_lock);
}
-EXPORT_SYMBOL_GPL(cpuidle_unregister_governor);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9c91b0f..6a7d25f 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -43,7 +43,6 @@
config NET_DMA
bool "Network: TCP receive copy offload"
depends on DMA_ENGINE && NET
- default y
help
This enables the use of DMA engines in the network stack to
offload receive copy-to-user operations, freeing CPU cycles.
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 6758832..c9b9081 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -984,8 +984,10 @@
*/
if (ohci->next_config_rom != NULL) {
- free_rom = ohci->config_rom;
- free_rom_bus = ohci->config_rom_bus;
+ if (ohci->next_config_rom != ohci->config_rom) {
+ free_rom = ohci->config_rom;
+ free_rom_bus = ohci->config_rom_bus;
+ }
ohci->config_rom = ohci->next_config_rom;
ohci->config_rom_bus = ohci->next_config_rom_bus;
ohci->next_config_rom = NULL;
@@ -1161,19 +1163,30 @@
* the right values in the bus reset tasklet.
*/
- ohci->next_config_rom =
- dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
- &ohci->next_config_rom_bus, GFP_KERNEL);
- if (ohci->next_config_rom == NULL)
- return -ENOMEM;
+ if (config_rom) {
+ ohci->next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &ohci->next_config_rom_bus,
+ GFP_KERNEL);
+ if (ohci->next_config_rom == NULL)
+ return -ENOMEM;
- memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
- fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+ } else {
+ /*
+ * In the suspend case, config_rom is NULL, which
+ * means that we just reuse the old config rom.
+ */
+ ohci->next_config_rom = ohci->config_rom;
+ ohci->next_config_rom_bus = ohci->config_rom_bus;
+ }
- ohci->next_header = config_rom[0];
+ ohci->next_header = be32_to_cpu(ohci->next_config_rom[0]);
ohci->next_config_rom[0] = 0;
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
- reg_write(ohci, OHCI1394_BusOptions, config_rom[2]);
+ reg_write(ohci, OHCI1394_BusOptions,
+ be32_to_cpu(ohci->next_config_rom[2]));
reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
@@ -1984,7 +1997,7 @@
return err;
}
- return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE);
+ return ohci_enable(&ohci->card, NULL, 0);
}
#endif
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index dd332f2..0b27da7 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -297,7 +297,7 @@
static int hidinput_getkeycode(struct input_dev *dev, int scancode,
int *keycode)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hid_usage *usage;
usage = hidinput_find_key(hid, scancode, 0);
@@ -311,7 +311,7 @@
static int hidinput_setkeycode(struct input_dev *dev, int scancode,
int keycode)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hid_usage *usage;
int old_keycode;
@@ -1152,7 +1152,7 @@
kfree(hidinput);
input_free_device(input_dev);
err_hid("Out of memory during hid input probe");
- return -1;
+ goto out_unwind;
}
input_set_drvdata(input_dev, hid);
@@ -1186,15 +1186,25 @@
* UGCI) cram a lot of unrelated inputs into the
* same interface. */
hidinput->report = report;
- input_register_device(hidinput->input);
+ if (input_register_device(hidinput->input))
+ goto out_cleanup;
hidinput = NULL;
}
}
- if (hidinput)
- input_register_device(hidinput->input);
+ if (hidinput && input_register_device(hidinput->input))
+ goto out_cleanup;
return 0;
+
+out_cleanup:
+ input_free_device(hidinput->input);
+ kfree(hidinput);
+out_unwind:
+ /* unwind the ones we already registered */
+ hidinput_disconnect(hid);
+
+ return -1;
}
EXPORT_SYMBOL_GPL(hidinput_connect);
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 41a59a8..a255285 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -129,6 +129,11 @@
#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
+#define USB_VENDOR_ID_GOTOP 0x08f2
+#define USB_DEVICE_ID_SUPER_Q2 0x007f
+#define USB_DEVICE_ID_GOGOPEN 0x00ce
+#define USB_DEVICE_ID_PENPOWER 0x00f4
+
#define USB_VENDOR_ID_GRIFFIN 0x077d
#define USB_DEVICE_ID_POWERMATE 0x0410
#define USB_DEVICE_ID_SOUNDKNOB 0x04AA
@@ -415,6 +420,9 @@
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9837adc..5fc4019 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -743,7 +743,7 @@
static long hiddev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct inode *inode = file->f_path.dentry->d_inode;
- return hiddev_ioctl(inode, file, cmd, compat_ptr(arg));
+ return hiddev_ioctl(inode, file, cmd, (unsigned long)compat_ptr(arg));
}
#endif
diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c
index c39c70a..6779893 100644
--- a/drivers/ieee1394/ieee1394_transactions.c
+++ b/drivers/ieee1394/ieee1394_transactions.c
@@ -235,7 +235,6 @@
packet->node_id);
return -EAGAIN;
}
- BUG();
case ACK_BUSY_X:
case ACK_BUSY_A:
@@ -282,7 +281,6 @@
packet->ack_code, packet->node_id, packet->tcode);
return -EAGAIN;
}
- BUG();
}
struct hpsb_packet *hpsb_make_readpacket(struct hpsb_host *host, nodeid_t node,
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index d7f6452..e8d5f6b 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -291,10 +291,10 @@
atomic_set(&pool->flush_ser, 0);
init_waitqueue_head(&pool->force_wait);
- pool->thread = kthread_create(ib_fmr_cleanup_thread,
- pool,
- "ib_fmr(%s)",
- device->name);
+ pool->thread = kthread_run(ib_fmr_cleanup_thread,
+ pool,
+ "ib_fmr(%s)",
+ device->name);
if (IS_ERR(pool->thread)) {
printk(KERN_WARNING PFX "couldn't start cleanup thread\n");
ret = PTR_ERR(pool->thread);
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index bcfa3cc..e7c25db 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -538,7 +538,15 @@
u8 *ip = (u8 *) ifp;
u8 csum = 0, len;
- for (len = 0; len < ifp->if_length; len++)
+ /*
+ * Limit length checksummed to max length of actual data.
+ * Checksum of erased eeprom will still be bad, but we avoid
+ * reading past the end of the buffer we were passed.
+ */
+ len = ifp->if_length;
+ if (len > sizeof(struct ipath_flash))
+ len = sizeof(struct ipath_flash);
+ while (len--)
csum += *ip++;
csum -= ifp->if_csum;
csum = ~csum;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 6a5dd5c..c61f9da 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -453,7 +453,7 @@
}
static void handle_supp_msgs(struct ipath_devdata *dd,
- unsigned supp_msgs, char msg[512])
+ unsigned supp_msgs, char *msg, int msgsz)
{
/*
* Print the message unless it's ibc status change only, which
@@ -461,9 +461,9 @@
*/
if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
int iserr;
- iserr = ipath_decode_err(msg, sizeof msg,
- dd->ipath_lasterror &
- ~INFINIPATH_E_IBSTATUSCHANGED);
+ iserr = ipath_decode_err(msg, msgsz,
+ dd->ipath_lasterror &
+ ~INFINIPATH_E_IBSTATUSCHANGED);
if (dd->ipath_lasterror &
~(INFINIPATH_E_RRCVEGRFULL |
INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
@@ -492,8 +492,8 @@
}
static unsigned handle_frequent_errors(struct ipath_devdata *dd,
- ipath_err_t errs, char msg[512],
- int *noprint)
+ ipath_err_t errs, char *msg,
+ int msgsz, int *noprint)
{
unsigned long nc;
static unsigned long nextmsg_time;
@@ -512,7 +512,7 @@
nextmsg_time = nc + HZ * 3;
}
else if (supp_msgs) {
- handle_supp_msgs(dd, supp_msgs, msg);
+ handle_supp_msgs(dd, supp_msgs, msg, msgsz);
supp_msgs = 0;
nmsgs = 0;
}
@@ -525,14 +525,14 @@
static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
{
- char msg[512];
+ char msg[128];
u64 ignore_this_time = 0;
int i, iserr = 0;
int chkerrpkts = 0, noprint = 0;
unsigned supp_msgs;
int log_idx;
- supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
+ supp_msgs = handle_frequent_errors(dd, errs, msg, sizeof msg, &noprint);
/* don't report errors that are masked */
errs &= ~dd->ipath_maskederrs;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 4b6b7ee..54c61a9 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -630,11 +630,8 @@
void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
enum ib_wc_status status)
{
- u32 last = qp->s_last;
-
- if (++last == qp->s_size)
- last = 0;
- qp->s_last = last;
+ unsigned long flags;
+ u32 last;
/* See ch. 11.2.4.1 and 10.7.3.1 */
if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
@@ -658,4 +655,11 @@
wc.port_num = 0;
ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
}
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ last = qp->s_last;
+ if (++last >= qp->s_size)
+ last = 0;
+ qp->s_last = last;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
}
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 6b33224..8cba9c5 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1282,7 +1282,7 @@
int size;
int i;
- spin_lock_irqsave(&qp->rq.lock, flags);
+ spin_lock_irqsave(&qp->sq.lock, flags);
ind = qp->sq.head;
@@ -1448,7 +1448,7 @@
(qp->sq.wqe_cnt - 1));
}
- spin_unlock_irqrestore(&qp->rq.lock, flags);
+ spin_unlock_irqrestore(&qp->sq.lock, flags);
return err;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 8761077..059cf92 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -60,7 +60,7 @@
.qp_state = IB_QPS_ERR
};
-#define IPOIB_CM_RX_DRAIN_WRID 0x7fffffff
+#define IPOIB_CM_RX_DRAIN_WRID 0xffffffff
static struct ib_send_wr ipoib_cm_rx_drain_wr = {
.wr_id = IPOIB_CM_RX_DRAIN_WRID,
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 6dd3758..6e9d75b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -120,6 +120,7 @@
{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -129,6 +130,7 @@
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 4941a9e..43aaa5c 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -24,7 +24,7 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pcspkr");
-#ifdef CONFIG_X86
+#if defined(CONFIG_MIPS) || defined(CONFIG_X86)
/* Use the global PIT lock ! */
#include <asm/i8253.h>
#else
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index f132702..b4423a4 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -129,12 +129,12 @@
*/
#define ATP_THRESHOLD 5
-/* MacBook Pro (Geyser 3 & 4) initialization constants */
-#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
-#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
-#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
-#define ATP_GEYSER3_MODE_REQUEST_INDEX 0
-#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04
+/* Geyser initialization constants */
+#define ATP_GEYSER_MODE_READ_REQUEST_ID 1
+#define ATP_GEYSER_MODE_WRITE_REQUEST_ID 9
+#define ATP_GEYSER_MODE_REQUEST_VALUE 0x300
+#define ATP_GEYSER_MODE_REQUEST_INDEX 0
+#define ATP_GEYSER_MODE_VENDOR_VALUE 0x04
/* Structure to hold all of our device specific stuff */
struct atp {
@@ -142,9 +142,11 @@
struct usb_device * udev; /* usb device */
struct urb * urb; /* usb request block */
signed char * data; /* transferred data */
- int open; /* non-zero if opened */
- struct input_dev *input; /* input dev */
- int valid; /* are the sensors valid ? */
+ struct input_dev * input; /* input dev */
+ unsigned char open; /* non-zero if opened */
+ unsigned char valid; /* are the sensors valid ? */
+ unsigned char size_detect_done;
+ unsigned char overflowwarn; /* overflow warning printed? */
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
/* current value of the sensors */
@@ -153,7 +155,6 @@
signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
/* accumulated sensors */
int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
- int overflowwarn; /* overflow warning printed? */
int datalen; /* size of an USB urb transfer */
int idlecount; /* number of empty packets */
struct work_struct work;
@@ -170,7 +171,7 @@
#define dprintk(format, a...) \
do { \
- if (debug) printk(format, ##a); \
+ if (debug) printk(KERN_DEBUG format, ##a); \
} while (0)
MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann");
@@ -188,6 +189,15 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
+static inline int atp_is_fountain(struct atp *dev)
+{
+ u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ return productId == FOUNTAIN_ANSI_PRODUCT_ID ||
+ productId == FOUNTAIN_ISO_PRODUCT_ID ||
+ productId == FOUNTAIN_TP_ONLY_PRODUCT_ID;
+}
+
/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
static inline int atp_is_geyser_2(struct atp *dev)
{
@@ -211,52 +221,63 @@
}
/*
- * By default Geyser 3 device sends standard USB HID mouse
+ * By default newer Geyser devices send standard USB HID mouse
* packets (Report ID 2). This code changes device mode, so it
* sends raw sensor reports (Report ID 5).
*/
-static int atp_geyser3_init(struct usb_device *udev)
+static int atp_geyser_init(struct usb_device *udev)
{
char data[8];
int size;
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- ATP_GEYSER3_MODE_READ_REQUEST_ID,
+ ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ATP_GEYSER3_MODE_REQUEST_VALUE,
- ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_VALUE,
+ ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
if (size != 8) {
err("Could not do mode read request from device"
- " (Geyser 3 mode)");
+ " (Geyser Raw mode)");
return -EIO;
}
/* Apply the mode switch */
- data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE;
+ data[0] = ATP_GEYSER_MODE_VENDOR_VALUE;
size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- ATP_GEYSER3_MODE_WRITE_REQUEST_ID,
+ ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ATP_GEYSER3_MODE_REQUEST_VALUE,
- ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_VALUE,
+ ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
if (size != 8) {
err("Could not do mode write request to device"
- " (Geyser 3 mode)");
+ " (Geyser Raw mode)");
return -EIO;
}
return 0;
}
-/* Reinitialise the device if it's a geyser 3 */
+/*
+ * Reinitialise the device. This usually stops stream of empty packets
+ * coming from it.
+ */
static void atp_reinit(struct work_struct *work)
{
struct atp *dev = container_of(work, struct atp, work);
struct usb_device *udev = dev->udev;
+ int retval;
dev->idlecount = 0;
- atp_geyser3_init(udev);
+
+ atp_geyser_init(udev);
+
+ retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+ if (retval) {
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+ }
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -337,7 +358,7 @@
break;
case -EOVERFLOW:
if(!dev->overflowwarn) {
- printk("appletouch: OVERFLOW with data "
+ printk(KERN_WARNING "appletouch: OVERFLOW with data "
"length %d, actual length is %d\n",
dev->datalen, dev->urb->actual_length);
dev->overflowwarn = 1;
@@ -426,15 +447,17 @@
dev->x_old = dev->y_old = -1;
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
- if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
+ if (dev->size_detect_done ||
+ atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
goto exit;
/* 17" Powerbooks have extra X sensors */
- for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
- if (!dev->xy_cur[i]) continue;
+ for (i = (atp_is_geyser_2(dev) ? 15 : 16); i < ATP_XSENSORS; i++) {
+ if (!dev->xy_cur[i])
+ continue;
- printk("appletouch: 17\" model detected.\n");
- if(atp_is_geyser_2(dev))
+ printk(KERN_INFO "appletouch: 17\" model detected.\n");
+ if (atp_is_geyser_2(dev))
input_set_abs_params(dev->input, ABS_X, 0,
(20 - 1) *
ATP_XFACT - 1,
@@ -444,10 +467,10 @@
(ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
-
break;
}
+ dev->size_detect_done = 1;
goto exit;
}
@@ -479,7 +502,7 @@
dev->y_old = y;
if (debug > 1)
- printk("appletouch: X: %3d Y: %3d "
+ printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
@@ -507,19 +530,25 @@
input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
- /* Many Geysers will continue to send packets continually after
- the first touch unless reinitialised. Do so if it's been
- idle for a while in order to avoid waking the kernel up
- several hundred times a second */
-
- if (!x && !y && !key) {
- dev->idlecount++;
- if (dev->idlecount == 10) {
- dev->valid = 0;
- schedule_work(&dev->work);
- }
- } else
- dev->idlecount = 0;
+ /*
+ * Many Geysers will continue to send packets continually after
+ * the first touch unless reinitialised. Do so if it's been
+ * idle for a while in order to avoid waking the kernel up
+ * several hundred times a second. Re-initialization does not
+ * work on Fountain touchpads.
+ */
+ if (!atp_is_fountain(dev)) {
+ if (!x && !y && !key) {
+ dev->idlecount++;
+ if (dev->idlecount == 10) {
+ dev->valid = 0;
+ schedule_work(&dev->work);
+ /* Don't resubmit urb here, wait for reinit */
+ return;
+ }
+ } else
+ dev->idlecount = 0;
+ }
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -593,12 +622,12 @@
else
dev->datalen = 81;
- if (atp_is_geyser_3(dev)) {
+ if (!atp_is_fountain(dev)) {
/* switch to raw sensor mode */
- if (atp_geyser3_init(udev))
+ if (atp_geyser_init(udev))
goto err_free_devs;
- printk("appletouch Geyser 3 inited.\n");
+ printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
}
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 655a392..26ec095 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -144,7 +144,7 @@
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (a == b || a != c) {
- printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+ printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
err = -ENODEV;
goto err_release_region;
}
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index b23a4f3..37e7c75 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -134,7 +134,7 @@
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
- printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
+ printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
err = -ENODEV;
goto err_release_region;
}
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 6af1998..02b3ad8 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -944,11 +944,7 @@
#endif /* __hppa__ */
-#if !defined(__mc68000__) /* Link error on m68k! */
-static void __exit hp_sdc_exit(void)
-#else
static void hp_sdc_exit(void)
-#endif
{
write_lock_irq(&hp_sdc.lock);
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 285fca6..623eea2 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -741,7 +741,7 @@
return i2c_bit_add_bus(&itv->i2c_adap);
}
-void __devexit exit_ivtv_i2c(struct ivtv *itv)
+void exit_ivtv_i2c(struct ivtv *itv)
{
IVTV_DEBUG_I2C("i2c exit\n");
diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h
index 677c329..de6a074 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.h
+++ b/drivers/media/video/ivtv/ivtv-i2c.h
@@ -36,6 +36,6 @@
/* init + register i2c algo-bit adapter */
int __devinit init_ivtv_i2c(struct ivtv *itv);
-void __devexit exit_ivtv_i2c(struct ivtv *itv);
+void exit_ivtv_i2c(struct ivtv *itv);
#endif
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index d366a6c..c8d62c2 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -122,9 +122,6 @@
else
fujitsu->brightness_changed = 0;
- if (status < 0)
- return status;
-
return fujitsu->brightness_level;
}
@@ -198,7 +195,7 @@
/* ACPI device */
-int acpi_fujitsu_add(struct acpi_device *device)
+static int acpi_fujitsu_add(struct acpi_device *device)
{
int result = 0;
int state = 0;
@@ -229,7 +226,7 @@
return result;
}
-int acpi_fujitsu_remove(struct acpi_device *device, int type)
+static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
ACPI_FUNCTION_TRACE("acpi_fujitsu_remove");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index a25ee71..1654a33 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -39,6 +39,7 @@
#define DRIVER_NAME "pxa2xx-mci"
#define NR_SG 1
+#define CLKRT_OFF (~0)
struct pxamci_host {
struct mmc_host *mmc;
@@ -371,6 +372,9 @@
unsigned long rate = host->clkrate;
unsigned int clk = rate / ios->clock;
+ if (host->clkrt == CLKRT_OFF)
+ clk_enable(host->clk);
+
/*
* clk might result in a lower divisor than we
* desire. check for that condition and adjust
@@ -379,14 +383,16 @@
if (rate / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
- clk_enable(host->clk);
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
- clk_disable(host->clk);
+ if (host->clkrt != CLKRT_OFF) {
+ host->clkrt = CLKRT_OFF;
+ clk_disable(host->clk);
+ }
}
if (host->power_mode != ios->power_mode) {
@@ -498,6 +504,7 @@
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
+ host->clkrt = CLKRT_OFF;
host->clk = clk_get(&pdev->dev, "MMCCLK");
if (IS_ERR(host->clk)) {
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 867cb73..5f800a6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1883,9 +1883,7 @@
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx
- select PPC_BESTCOMM
- select PPC_BESTCOMM_FEC
+ depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
select CRC32
select PHYLIB
---help---
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 53fe7de..084acfd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -371,7 +371,6 @@
if (phydev->speed != lp->old_speed) {
#if defined(CONFIG_BFIN_MAC_RMII)
u32 opmode = bfin_read_EMAC_OPMODE();
- bf537mac_disable();
switch (phydev->speed) {
case 10:
opmode |= RMII_10;
@@ -386,7 +385,6 @@
break;
}
bfin_write_EMAC_OPMODE(opmode);
- bf537mac_enable();
#endif
new_state = 1;
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 781ed99..3b84028 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -351,4 +351,12 @@
__E1000_DOWN
};
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6c9a643..667f18b 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -32,9 +32,6 @@
#include <asm/uaccess.h>
-extern char e1000_driver_name[];
-extern char e1000_driver_version[];
-
extern int e1000_up(struct e1000_adapter *adapter);
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
@@ -733,16 +730,16 @@
#define REG_PATTERN_TEST(R, M, W) \
{ \
- uint32_t pat, value; \
- uint32_t test[] = \
+ uint32_t pat, val; \
+ const uint32_t test[] = \
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if (value != (test[pat] & W & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if (val != (test[pat] & W & M)) { \
DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
- E1000_##R, value, (test[pat] & W & M)); \
+ E1000_##R, val, (test[pat] & W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -752,12 +749,12 @@
#define REG_SET_AND_CHECK(R, M, W) \
{ \
- uint32_t value; \
+ uint32_t val; \
E1000_WRITE_REG(&adapter->hw, R, W & M); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if ((W & M) != (value & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if ((W & M) != (val & M)) { \
DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
- "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
+ "expected 0x%08X\n", E1000_##R, (val & M), (W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -1621,8 +1618,6 @@
}
}
-extern void e1000_power_up_phy(struct e1000_adapter *);
-
static void
e1000_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, uint64_t *data)
@@ -1859,8 +1854,8 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if (adapter->hw.mac_type < e1000_82571) {
if (!adapter->blink_timer.function) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8fa0fe4..7c6888c 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -8607,7 +8607,7 @@
DEBUGFUNC("e1000_read_ich8_data");
- if (size < 1 || size > 2 || data == 0x0 ||
+ if (size < 1 || size > 2 || data == NULL ||
index > ICH_FLASH_LINEAR_ADDR_MASK)
return error;
@@ -8841,7 +8841,7 @@
* amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
* bank size may be 4, 8 or 64 KBytes
*****************************************************************************/
-int32_t
+static int32_t
e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
{
union ich8_hws_flash_status hsfsts;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f1ce348..72deff0 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -37,8 +37,8 @@
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
-char e1000_driver_version[] = DRV_VERSION;
-static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
/* e1000_pci_tbl - PCI Device ID Table
*
@@ -188,7 +188,6 @@
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
-void e1000_set_ethtool_ops(struct net_device *netdev);
static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static void e1000_tx_timeout(struct net_device *dev);
@@ -213,8 +212,6 @@
static void e1000_netpoll (struct net_device *netdev);
#endif
-extern void e1000_check_options(struct e1000_adapter *adapter);
-
#define COPYBREAK_DEFAULT 256
static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index f485874..e6565ce 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -46,7 +46,7 @@
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static int num_##X = 0; \
+ static unsigned int num_##X; \
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
@@ -198,9 +198,9 @@
struct e1000_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
+ const char *name;
+ const char *err;
+ int def;
union {
struct { /* range_option info */
int min;
@@ -214,8 +214,9 @@
};
static int __devinit
-e1000_validate_option(int *value, struct e1000_option *opt,
- struct e1000_adapter *adapter)
+e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
@@ -348,7 +349,7 @@
};
if (num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
+ unsigned int rx_csum = XsumRX[bd];
e1000_validate_option(&rx_csum, &opt, adapter);
adapter->rx_csum = rx_csum;
} else {
@@ -374,7 +375,7 @@
};
if (num_FlowControl > bd) {
- int fc = FlowControl[bd];
+ unsigned int fc = FlowControl[bd];
e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc;
} else {
@@ -506,7 +507,7 @@
};
if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
+ unsigned int spd = SmartPowerDownEnable[bd];
e1000_validate_option(&spd, &opt, adapter);
adapter->smart_power_down = spd;
} else {
@@ -522,7 +523,7 @@
};
if (num_KumeranLockLoss > bd) {
- int kmrn_lock_loss = KumeranLockLoss[bd];
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
} else {
@@ -581,7 +582,7 @@
static void __devinit
e1000_check_copper_options(struct e1000_adapter *adapter)
{
- int speed, dplx, an;
+ unsigned int speed, dplx, an;
int bd = adapter->bd_number;
{ /* Speed */
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf70522..14141a5 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -283,7 +283,7 @@
adapter->flags &= ~FLAG_HAS_WOL;
/* quad ports only support WoL on port A */
if (adapter->flags & FLAG_IS_QUAD_PORT &&
- (!adapter->flags & FLAG_IS_QUAD_PORT_A))
+ (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
adapter->flags &= ~FLAG_HAS_WOL;
break;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 0666e62..6a39784 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1680,8 +1680,8 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if (adapter->hw.phy.type == e1000_phy_ife) {
if (!adapter->blink_timer.function) {
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index e4e655e..3327892 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -52,10 +52,11 @@
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-#define E1000_PARAM(X, desc) \
- static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static int num_##X; \
- module_param_array_named(X, X, int, &num_##X, 0); \
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] \
+ = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
@@ -124,9 +125,9 @@
struct e1000_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
+ const char *name;
+ const char *err;
+ int def;
union {
struct { /* range_option info */
int min;
@@ -139,8 +140,8 @@
} arg;
};
-static int __devinit e1000_validate_option(int *value,
- struct e1000_option *opt,
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
struct e1000_adapter *adapter)
{
if (*value == OPTION_UNSET) {
@@ -213,7 +214,7 @@
}
{ /* Transmit Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.err = "using default of "
@@ -232,7 +233,7 @@
}
}
{ /* Transmit Absolute Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Absolute Interrupt Delay",
.err = "using default of "
@@ -277,7 +278,7 @@
}
}
{ /* Receive Absolute Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
.err = "using default of "
@@ -296,7 +297,7 @@
}
}
{ /* Interrupt Throttling Rate */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Throttling Rate (ints/sec)",
.err = "using default of "
@@ -344,7 +345,7 @@
}
}
{ /* Smart Power Down */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = enable_option,
.name = "PHY Smart Power Down",
.err = "defaulting to Disabled",
@@ -352,7 +353,7 @@
};
if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
+ unsigned int spd = SmartPowerDownEnable[bd];
e1000_validate_option(&spd, &opt, adapter);
if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
&& spd)
@@ -360,7 +361,7 @@
}
}
{ /* Kumeran Lock Loss Workaround */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = enable_option,
.name = "Kumeran Lock Loss Workaround",
.err = "defaulting to Enabled",
@@ -368,7 +369,7 @@
};
if (num_KumeranLockLoss > bd) {
- int kmrn_lock_loss = KumeranLockLoss[bd];
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
if (hw->mac.type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index fc1cf0b..a8a0ee2 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -879,9 +879,9 @@
"Error while parsing device node resource\n" );
return rv;
}
- if ((mem.end - mem.start + 1) != sizeof(struct mpc52xx_fec)) {
+ if ((mem.end - mem.start + 1) < sizeof(struct mpc52xx_fec)) {
printk(KERN_ERR DRIVER_NAME
- " - invalid resource size (%lx != %x), check mpc52xx_devices.c\n",
+ " - invalid resource size (%lx < %x), check mpc52xx_devices.c\n",
(unsigned long)(mem.end - mem.start + 1), sizeof(struct mpc52xx_fec));
return -EINVAL;
}
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 1eee889..3d2e721 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -196,4 +196,11 @@
uint32_t alloc_rx_buff_failed;
boolean_t have_msi;
};
+
+/* Exported from other modules */
+extern void ixgb_check_options(struct ixgb_adapter *adapter);
+extern void ixgb_set_ethtool_ops(struct net_device *netdev);
+extern char ixgb_driver_name[];
+extern const char ixgb_driver_version[];
+
#endif /* _IXGB_H_ */
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index fddd584..a267dd8 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -32,9 +32,6 @@
#include <asm/uaccess.h>
-extern char ixgb_driver_name[];
-extern char ixgb_driver_version[];
-
extern int ixgb_up(struct ixgb_adapter *adapter);
extern void ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog);
extern void ixgb_reset(struct ixgb_adapter *adapter);
@@ -639,8 +636,8 @@
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if(!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index ecbf458..2c6367a 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -1174,7 +1174,7 @@
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-boolean_t
+static boolean_t
ixgb_link_reset(struct ixgb_hw *hw)
{
boolean_t link_status = FALSE;
@@ -1205,7 +1205,7 @@
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-void
+static void
ixgb_optics_reset(struct ixgb_hw *hw)
{
if (hw->phy_type == ixgb_phy_type_txn17401) {
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index d444de5..3021234 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -37,8 +37,8 @@
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "1.0.126-k2"DRIVERNAPI
-char ixgb_driver_version[] = DRV_VERSION;
-static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+const char ixgb_driver_version[] = DRV_VERSION;
+static const char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
/* ixgb_pci_tbl - PCI Device ID Table
*
@@ -104,7 +104,6 @@
static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter);
#endif
static void ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter);
-void ixgb_set_ethtool_ops(struct net_device *netdev);
static void ixgb_tx_timeout(struct net_device *dev);
static void ixgb_tx_timeout_task(struct work_struct *work);
static void ixgb_vlan_rx_register(struct net_device *netdev,
@@ -123,9 +122,6 @@
static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
static void ixgb_io_resume (struct pci_dev *pdev);
-/* Exported from other modules */
-extern void ixgb_check_options(struct ixgb_adapter *adapter);
-
static struct pci_error_handlers ixgb_err_handler = {
.error_detected = ixgb_io_error_detected,
.slot_reset = ixgb_io_slot_reset,
@@ -1085,7 +1081,8 @@
rctl |= IXGB_RCTL_MPE;
IXGB_WRITE_REG(hw, RCTL, rctl);
} else {
- uint8_t mta[netdev->mc_count * IXGB_ETH_LENGTH_OF_ADDRESS];
+ uint8_t mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
+ IXGB_ETH_LENGTH_OF_ADDRESS];
IXGB_WRITE_REG(hw, RCTL, rctl);
@@ -1324,8 +1321,8 @@
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && !nr_frags && size == len
- && size > 8))
+ if (unlikely(mss && (f == (nr_frags - 1))
+ && size == len && size > 8))
size -= 4;
buffer_info->length = size;
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index 5d5ddab..865d14d 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -44,10 +44,11 @@
*/
#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
-#define IXGB_PARAM(X, desc) \
- static int __devinitdata X[IXGB_MAX_NIC+1] = IXGB_PARAM_INIT; \
- static int num_##X = 0; \
- module_param_array_named(X, X, int, &num_##X, 0); \
+#define IXGB_PARAM(X, desc) \
+ static int __devinitdata X[IXGB_MAX_NIC+1] \
+ = IXGB_PARAM_INIT; \
+ static unsigned int num_##X = 0; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
/* Transmit Descriptor Count
@@ -178,8 +179,8 @@
struct ixgb_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
+ const char *name;
+ const char *err;
int def;
union {
struct { /* range_option info */
@@ -197,7 +198,7 @@
};
static int __devinit
-ixgb_validate_option(int *value, struct ixgb_option *opt)
+ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
{
if(*value == OPTION_UNSET) {
*value = opt->def;
@@ -266,7 +267,7 @@
}
{ /* Transmit Descriptor Count */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_TXD),
@@ -285,7 +286,7 @@
tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Descriptor Count */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_RXD),
@@ -304,7 +305,7 @@
rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Checksum Offload Enable */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = enable_option,
.name = "Receive Checksum Offload",
.err = "defaulting to Enabled",
@@ -312,7 +313,7 @@
};
if(num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
+ unsigned int rx_csum = XsumRX[bd];
ixgb_validate_option(&rx_csum, &opt);
adapter->rx_csum = rx_csum;
} else {
@@ -328,7 +329,7 @@
{ ixgb_fc_full, "Flow Control Enabled" },
{ ixgb_fc_default, "Flow Control Hardware Default" }};
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
@@ -338,7 +339,7 @@
};
if(num_FlowControl > bd) {
- int fc = FlowControl[bd];
+ unsigned int fc = FlowControl[bd];
ixgb_validate_option(&fc, &opt);
adapter->hw.fc.type = fc;
} else {
@@ -346,7 +347,7 @@
}
}
{ /* Receive Flow Control High Threshold */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control High Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
@@ -366,7 +367,7 @@
"Ignoring RxFCHighThresh when no RxFC\n");
}
{ /* Receive Flow Control Low Threshold */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control Low Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
@@ -386,7 +387,7 @@
"Ignoring RxFCLowThresh when no RxFC\n");
}
{ /* Flow Control Pause Time Request*/
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Flow Control Pause Time Request",
.err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
@@ -396,7 +397,7 @@
};
if(num_FCReqTimeout > bd) {
- int pause_time = FCReqTimeout[bd];
+ unsigned int pause_time = FCReqTimeout[bd];
ixgb_validate_option(&pause_time, &opt);
adapter->hw.fc.pause_time = pause_time;
} else {
@@ -419,7 +420,7 @@
}
}
{ /* Receive Interrupt Delay */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -436,7 +437,7 @@
}
}
{ /* Transmit Interrupt Delay */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -454,7 +455,7 @@
}
{ /* Transmit Interrupt Delay Enable */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = enable_option,
.name = "Tx Interrupt Delay Enable",
.err = "defaulting to Enabled",
@@ -462,7 +463,7 @@
};
if(num_IntDelayEnable > bd) {
- int ide = IntDelayEnable[bd];
+ unsigned int ide = IntDelayEnable[bd];
ixgb_validate_option(&ide, &opt);
adapter->tx_int_delay_enable = ide;
} else {
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index c160a7d..bc51432 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -244,7 +244,7 @@
extern struct ixgbe_info ixgbe_82598AT_info;
extern char ixgbe_driver_name[];
-extern char ixgbe_driver_version[];
+extern const char ixgbe_driver_version[];
extern int ixgbe_up(struct ixgbe_adapter *adapter);
extern void ixgbe_down(struct ixgbe_adapter *adapter);
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 00ee201..4d64673 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -30,8 +30,7 @@
#include <linux/delay.h>
#include <linux/sched.h>
-#include "ixgbe_type.h"
-#include "ixgbe_common.h"
+#include "ixgbe.h"
#include "ixgbe_phy.h"
#define IXGBE_82598_MAX_TX_QUEUES 32
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b75f1c6..00bc525 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -45,12 +45,13 @@
#include "ixgbe_common.h"
char ixgbe_driver_name[] = "ixgbe";
-static char ixgbe_driver_string[] =
- "Intel(R) 10 Gigabit PCI Express Network Driver";
+static const char ixgbe_driver_string[] =
+ "Intel(R) 10 Gigabit PCI Express Network Driver";
#define DRV_VERSION "1.1.18"
-char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
+const char ixgbe_driver_version[] = DRV_VERSION;
+static const char ixgbe_copyright[] =
+ "Copyright (c) 1999-2007 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598AF] = &ixgbe_82598AF_info,
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 366e62a..0f306dd 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1151,7 +1151,7 @@
u16 length;
__wsum checksum;
- while (rx_done->entry[idx].length != 0 && work_done++ < budget) {
+ while (rx_done->entry[idx].length != 0 && work_done < budget) {
length = ntohs(rx_done->entry[idx].length);
rx_done->entry[idx].length = 0;
checksum = csum_unfold(rx_done->entry[idx].checksum);
@@ -1167,6 +1167,7 @@
rx_bytes += rx_ok * (unsigned long)length;
cnt++;
idx = cnt & (myri10ge_max_intr_slots - 1);
+ work_done++;
}
rx_done->idx = idx;
rx_done->cnt = cnt;
@@ -1233,13 +1234,12 @@
struct myri10ge_priv *mgp =
container_of(napi, struct myri10ge_priv, napi);
struct net_device *netdev = mgp->dev;
- struct myri10ge_rx_done *rx_done = &mgp->rx_done;
int work_done;
/* process as many rx events as NAPI will allow */
work_done = myri10ge_clean_rx_done(mgp, budget);
- if (rx_done->entry[rx_done->idx].length == 0 || !netif_running(netdev)) {
+ if (work_done < budget || !netif_running(netdev)) {
netif_rx_complete(netdev, napi);
put_be32(htonl(3), mgp->irq_claim);
}
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 8936ed3..a005d8f 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -491,7 +491,7 @@
int error = -ENOMEM;
struct sock *sk;
- sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto, 1);
+ sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto);
if (!sk)
goto out;
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 921d4ef..f8904fd 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -1416,7 +1416,7 @@
int error = -ENOMEM;
struct sock *sk;
- sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto, 1);
+ sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto);
if (!sk)
goto out;
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index a2de32f..2c68573 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -586,6 +586,10 @@
USB_DEVICE(0x0a46, 0x0268), /* ShanTou ST268 USB NIC */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0a46, 0x8515), /* ADMtek ADM8515 USB NIC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 5ea8772..37c52e1 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -142,9 +142,10 @@
* To date internally, just copy this out to the user.
*/
case LMCIOCGINFO: /*fold01*/
- if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t)))
- return -EFAULT;
- ret = 0;
+ if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof(lmc_ctl_t)))
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
case LMCIOCSINFO: /*fold01*/
@@ -159,8 +160,10 @@
break;
}
- if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
- return -EFAULT;
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
sc->lmc_media->set_status (sc, &ctl);
@@ -190,8 +193,10 @@
break;
}
- if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t)))
- return -EFAULT;
+ if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) {
+ ret = -EFAULT;
+ break;
+ }
if (new_type == old_type)
@@ -229,9 +234,10 @@
sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo,
- sizeof (struct lmc_xinfo)))
- return -EFAULT;
- ret = 0;
+ sizeof(struct lmc_xinfo)))
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
@@ -262,9 +268,9 @@
if (copy_to_user(ifr->ifr_data, &sc->stats,
sizeof (struct lmc_statistics)))
- return -EFAULT;
-
- ret = 0;
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
case LMCIOCCLEARLMCSTATS: /*fold01*/
@@ -292,8 +298,10 @@
break;
}
- if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
- return -EFAULT;
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
sc->ictl.circuit_type = ctl.circuit_type;
ret = 0;
@@ -318,12 +326,15 @@
#ifdef DEBUG
case LMCIOCDUMPEVENTLOG:
- if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32)))
- return -EFAULT;
+ if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof(u32))) {
+ ret = -EFAULT;
+ break;
+ }
if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
- return -EFAULT;
+ ret = -EFAULT;
+ else
+ ret = 0;
- ret = 0;
break;
#endif /* end ifdef _DBG_EVENTLOG */
case LMCIOCT1CONTROL: /*fold01*/
@@ -346,8 +357,10 @@
*/
netif_stop_queue(dev);
- if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control)))
- return -EFAULT;
+ if (copy_from_user(&xc, ifr->ifr_data, sizeof(struct lmc_xilinx_control))) {
+ ret = -EFAULT;
+ break;
+ }
switch(xc.command){
case lmc_xilinx_reset: /*fold02*/
{
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 25cfc6c..8d52a26 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -96,8 +96,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called iwl4965.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl4965.ko.
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
@@ -124,5 +124,5 @@
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called iwl3945.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl3945.ko.
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 9b35259..e079a52 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -34,7 +34,7 @@
#include "intel-iommu.h"
#include <asm/proto.h> /* force_iommu in this header in x86-64*/
#include <asm/cacheflush.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include "pci.h"
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
@@ -749,8 +749,8 @@
char *dmar_get_fault_reason(u8 fault_reason)
{
- if (fault_reason > MAX_FAULT_REASON_IDX)
- return fault_reason_strings[MAX_FAULT_REASON_IDX];
+ if (fault_reason >= MAX_FAULT_REASON_IDX)
+ return fault_reason_strings[MAX_FAULT_REASON_IDX - 1];
else
return fault_reason_strings[fault_reason];
}
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 8c1012b..e2041b4 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -542,8 +542,6 @@
/* RTC Power management control */
-static struct timespec s3c_rtc_delta;
-
static int ticnt_save;
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a5763c6..86cf10e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -172,12 +172,12 @@
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt> and
- <file:Documentation/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
If unsure, say N.
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 21ba571..bb6550e 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -38,9 +38,7 @@
if (ret) {
SCp->buffer++;
SCp->buffers_residual--;
- SCp->ptr = (char *)
- (page_address(SCp->buffer->page) +
- SCp->buffer->offset);
+ SCp->ptr = sg_virt(SCp->buffer);
SCp->this_residual = SCp->buffer->length;
} else {
SCp->ptr = NULL;
@@ -76,9 +74,7 @@
SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
- SCpnt->SCp.ptr = (char *)
- (page_address(SCpnt->SCp.buffer->page) +
- SCpnt->SCp.buffer->offset);
+ SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer);
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
SCpnt->SCp.phase = SCpnt->request_bufflen;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 6846a6c..7ad2192 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -657,7 +657,15 @@
serial_txx9_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- if (state == 0)
+ /*
+ * If oldstate was -1 this is called from
+ * uart_configure_port(). In this case do not initialize the
+ * port now, because the port was already initialized (for
+ * non-console port) or should not be initialized here (for
+ * console port). If we initialized the port here we lose
+ * serial console settings.
+ */
+ if (state == 0 && oldstate != -1)
serial_txx9_initialize(port);
}
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 161d102..e52a6296 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -601,8 +601,7 @@
return 0;
}
-static int maple_bus_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int maple_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return 0;
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index eb4ac47..316a746 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -434,7 +434,7 @@
if (dma) {
io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
len = sg_dma_len (sg + i);
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU)
+#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
io->urbs[i]->transfer_buffer = NULL;
#else
io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index fb9d8d0..cc4b60f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1509,7 +1509,7 @@
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
options and other important info support.
config FB_VT8623
@@ -1807,7 +1807,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1892,9 +1892,7 @@
If unsure, say N.
-if ARCH_OMAP
- source "drivers/video/omap/Kconfig"
-endif
+source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
source "drivers/video/display/Kconfig"
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index be1d57b..83ee3e7 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -27,8 +27,6 @@
#include "ati_ids.h"
-static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
-
/*
* Workarounds for bugs in PC laptops:
* - enable D2 sleep in some IBM Thinkpads
@@ -39,6 +37,8 @@
*/
#if defined(CONFIG_PM) && defined(CONFIG_X86)
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
struct radeon_device_id {
const char *ident; /* (arbitrary) Name */
const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index f4fcf11..4440885 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,6 +1,6 @@
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
- depends on FB
+ depends on FB && ARCH_OMAP
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 6854fd6..9adbb4f 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -17,7 +17,8 @@
bool "Userspace communication over connector"
default y
--- help ---
- This allows to communicate with userspace using connector [Documentation/connector].
+ This allows to communicate with userspace using connector. For more
+ information see <file:Documentation/connector/connector.txt>.
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 81db48f..2792bc1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -15,8 +15,8 @@
implementation entirely in software (which can sometimes fail to
reboot the machine) and a driver for hardware watchdog boards, which
are more robust and can also keep track of the temperature inside
- your computer. For details, read <file:Documentation/watchdog/watchdog.txt>
- in the kernel source.
+ your computer. For details, read
+ <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
The watchdog is usually used together with the watchdog daemon
which is available from
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index c404fc6..b481cc0 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -31,7 +31,7 @@
static char ali_expect_release;
static struct pci_dev *ali_pci;
static u32 ali_timeout_bits; /* stores the computed timeout */
-static spinlock_t ali_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */
/* module parameters */
static int timeout = WATCHDOG_TIMEOUT;
@@ -398,8 +398,6 @@
{
int ret;
- spin_lock_init(&ali_lock);
-
/* Check whether or not the hardware watchdog is there */
if (ali_find_watchdog() != 0) {
return -ENODEV;
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 19db530..a61cbd4 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -61,7 +61,7 @@
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
@@ -200,8 +200,6 @@
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
@@ -262,7 +260,7 @@
static void __exit davinci_wdt_exit(void)
{
- return platform_driver_unregister(&platform_wdt_driver);
+ platform_driver_unregister(&platform_wdt_driver);
}
module_init(davinci_wdt_init);
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index f236954..ca44fd9 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -77,7 +77,7 @@
/* internal variables */
static void __iomem *BASEADDR;
-static spinlock_t esb_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
@@ -456,8 +456,6 @@
{
int ret;
- spin_lock_init(&esb_lock);
-
/* Check whether or not the hardware watchdog is there */
if (!esb_getdevice () || esb_pci == NULL)
return -ENODEV;
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index cd5a565..a0e6809 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -35,10 +35,12 @@
* 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
* 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
* 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
- * 82801HB (ICH8) : document number 313056-002, 313057-004,
- * 82801HR (ICH8R) : document number 313056-002, 313057-004,
- * 82801HH (ICH8DH) : document number 313056-002, 313057-004,
- * 82801HO (ICH8DO) : document number 313056-002, 313057-004,
+ * 82801HB (ICH8) : document number 313056-003, 313057-009,
+ * 82801HR (ICH8R) : document number 313056-003, 313057-009,
+ * 82801HBM (ICH8M) : document number 313056-003, 313057-009,
+ * 82801HH (ICH8DH) : document number 313056-003, 313057-009,
+ * 82801HO (ICH8DO) : document number 313056-003, 313057-009,
+ * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
* 82801IB (ICH9) : document number 316972-001, 316973-001,
* 82801IR (ICH9R) : document number 316972-001, 316973-001,
* 82801IH (ICH9DH) : document number 316972-001, 316973-001,
@@ -95,8 +97,10 @@
TCO_ICH7M, /* ICH7-M */
TCO_ICH7MDH, /* ICH7-M DH */
TCO_ICH8, /* ICH8 & ICH8R */
+ TCO_ICH8ME, /* ICH8M-E */
TCO_ICH8DH, /* ICH8DH */
TCO_ICH8DO, /* ICH8DO */
+ TCO_ICH8M, /* ICH8M */
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
@@ -125,8 +129,10 @@
{"ICH7-M", 2},
{"ICH7-M DH", 2},
{"ICH8 or ICH8R", 2},
+ {"ICH8M-E", 2},
{"ICH8DH", 2},
{"ICH8DO", 2},
+ {"ICH8M", 2},
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
@@ -134,6 +140,15 @@
{NULL,0}
};
+#define ITCO_PCI_DEVICE(dev, data) \
+ .vendor = PCI_VENDOR_ID_INTEL, \
+ .device = dev, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .class = 0, \
+ .class_mask = 0, \
+ .driver_data = data
+
/*
* This data only exists for exporting the supported PCI ids
* via MODULE_DEVICE_TABLE. We do not actually register a
@@ -141,45 +156,47 @@
* functions that probably will be registered by other drivers.
*/
static struct pci_device_id iTCO_wdt_pci_tbl[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO },
- { PCI_VENDOR_ID_INTEL, 0x2918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9 },
- { PCI_VENDOR_ID_INTEL, 0x2916, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9R },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9DH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2674, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2675, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2676, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2677, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2678, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2679, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )},
+ { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )},
+ { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2673, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2674, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2675, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2676, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2677, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2678, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2679, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267a, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267b, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267c, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
@@ -300,6 +317,7 @@
/* disable chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
+ spin_unlock(&iTCO_wdt_private.io_lock);
printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
return -EIO;
}
@@ -590,7 +608,7 @@
* Init & exit routines
*/
-static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
+static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
{
int ret;
u32 base_address;
@@ -694,7 +712,7 @@
return ret;
}
-static void iTCO_wdt_cleanup(void)
+static void __devexit iTCO_wdt_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -709,7 +727,7 @@
iTCO_wdt_private.ACPIBASE = 0;
}
-static int iTCO_wdt_probe(struct platform_device *dev)
+static int __devinit iTCO_wdt_probe(struct platform_device *dev)
{
int found = 0;
struct pci_dev *pdev = NULL;
@@ -735,7 +753,7 @@
return 0;
}
-static int iTCO_wdt_remove(struct platform_device *dev)
+static int __devexit iTCO_wdt_remove(struct platform_device *dev)
{
if (iTCO_wdt_private.ACPIBASE)
iTCO_wdt_cleanup();
@@ -753,7 +771,7 @@
static struct platform_driver iTCO_wdt_driver = {
.probe = iTCO_wdt_probe,
- .remove = iTCO_wdt_remove,
+ .remove = __devexit_p(iTCO_wdt_remove),
.shutdown = iTCO_wdt_shutdown,
.suspend = iTCO_wdt_suspend,
.resume = iTCO_wdt_resume,
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index c3a60f5..4b89f40 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -48,7 +48,7 @@
static struct platform_device *ibwdt_platform_device;
static unsigned long ibwdt_is_open;
-static spinlock_t ibwdt_lock;
+static DEFINE_SPINLOCK(ibwdt_lock);
static char expect_close;
/* Module information */
@@ -308,8 +308,6 @@
{
int res;
- spin_lock_init(&ibwdt_lock);
-
#if WDT_START != WDT_STOP
if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP);
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 6d35bb1..e6e07b4 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -123,8 +123,8 @@
static int zf_action = GEN_RESET;
static unsigned long zf_is_open;
static char zf_expect_close;
-static spinlock_t zf_lock;
-static spinlock_t zf_port_lock;
+static DEFINE_SPINLOCK(zf_lock);
+static DEFINE_SPINLOCK(zf_port_lock);
static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
static unsigned long next_heartbeat = 0;
@@ -438,9 +438,6 @@
zf_show_action(action);
- spin_lock_init(&zf_lock);
- spin_lock_init(&zf_port_lock);
-
if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
ZF_IOBASE);
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
index a0bf95f..6369f56 100644
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ b/drivers/watchdog/mpc83xx_wdt.c
@@ -56,7 +56,7 @@
static unsigned int timeout_sec;
static unsigned long wdt_is_open;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
static void mpc83xx_wdt_keepalive(void)
{
@@ -185,9 +185,6 @@
printk(KERN_INFO "WDT driver for MPC83xx initialized. "
"mode:%s timeout=%d (%d seconds)\n",
reset ? "reset":"interrupt", timeout, timeout_sec);
-
- spin_lock_init(&wdt_spinlock);
-
return 0;
err_unmap:
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 3d3deae..15e4f88 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -61,7 +61,7 @@
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
@@ -561,8 +561,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT);
/* request_region(io, 2, "pc87413"); */
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 22f8873..b04aa09 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -80,7 +80,7 @@
static int nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
@@ -254,8 +254,6 @@
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
@@ -335,7 +333,7 @@
static void __exit pnx4008_wdt_exit(void)
{
- return platform_driver_unregister(&platform_wdt_driver);
+ platform_driver_unregister(&platform_wdt_driver);
}
module_init(pnx4008_wdt_init);
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index 285d852..2ee2677 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -54,7 +54,7 @@
#include <asm/system.h>
static unsigned long sbc8360_is_open;
-static spinlock_t sbc8360_lock;
+static DEFINE_SPINLOCK(sbc8360_lock);
static char expect_close;
#define PFX "sbc8360: "
@@ -359,7 +359,6 @@
goto out_noreboot;
}
- spin_lock_init(&sbc8360_lock);
res = misc_register(&sbc8360_miscdev);
if (res) {
printk(KERN_ERR PFX "failed to register misc device\n");
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 9670d47..32ccd7c 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -74,7 +74,7 @@
static int io_len = 2; /* for non plug and play */
static struct semaphore open_sem;
static char expect_close;
-static spinlock_t sc1200wdt_lock; /* io port access serialisation */
+static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */
#if defined CONFIG_PNP
static int isapnp = 1;
@@ -375,7 +375,6 @@
printk("%s\n", banner);
- spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
#if defined CONFIG_PNP
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index e8594c6..2847324 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -125,7 +125,7 @@
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
@@ -383,8 +383,6 @@
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index d3cb0a7..5d2b5ba 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -83,7 +83,7 @@
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
@@ -540,8 +540,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index df33b3b..3864928 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -48,7 +48,7 @@
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
@@ -328,8 +328,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 51826c2..c622a0e 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -47,7 +47,7 @@
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2e;
@@ -376,8 +376,6 @@
{
int ret, i, found = 0;
- spin_lock_init(&io_lock);
-
printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
if (wdt_io == 0) {
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index 3c88fe1..bcc9d48 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -94,7 +94,7 @@
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
@@ -350,8 +350,6 @@
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
{
timeout = WATCHDOG_TIMEOUT;
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 1579684..b475529 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -50,7 +50,7 @@
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
@@ -476,8 +476,6 @@
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/*
* Check that the timeout value is within it's range ;
* if not reset to the default
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 950905d..9e36809 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -45,7 +45,7 @@
static unsigned long wafwdt_is_open;
static char expect_close;
-static spinlock_t wafwdt_lock;
+static DEFINE_SPINLOCK(wafwdt_lock);
/*
* You must set these - there is no sane way to probe for this board.
@@ -252,8 +252,6 @@
printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
- spin_lock_init(&wafwdt_lock);
-
if (timeout < 1 || timeout > 255) {
timeout = WD_TIMO;
printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 0a3de6a..53d0bb4 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -253,7 +253,7 @@
printk(KERN_CRIT "Possible fan fault.\n");
}
#endif /* CONFIG_WDT_501 */
- if (!(status & WDC_SR_WCCR))
+ if (!(status & WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT "Would Reboot.\n");
@@ -264,6 +264,7 @@
#else
printk(KERN_CRIT "Reset in 5ms.\n");
#endif
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index 7d300ff..9b7f6b6 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -59,7 +59,7 @@
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
@@ -448,8 +448,6 @@
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt977_set_timeout(timeout))
{
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 6baf4ae..1355608 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -74,7 +74,7 @@
static int dev_count;
static struct semaphore open_sem;
-static spinlock_t wdtpci_lock;
+static DEFINE_SPINLOCK(wdtpci_lock);
static char expect_close;
static int io;
@@ -298,7 +298,7 @@
printk(KERN_CRIT PFX "Possible fan fault.\n");
}
#endif /* CONFIG_WDT_501_PCI */
- if (!(status&WDC_SR_WCCR))
+ if (!(status&WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT PFX "Would Reboot.\n");
@@ -309,6 +309,7 @@
#else
printk(KERN_CRIT PFX "Reset in 5ms.\n");
#endif
+ }
return IRQ_HANDLED;
}
@@ -606,7 +607,6 @@
}
sema_init(&open_sem, 1);
- spin_lock_init(&wdtpci_lock);
irq = dev->irq;
io = pci_resource_start (dev, 2);
diff --git a/fs/Kconfig b/fs/Kconfig
index cc28a69..c75c954 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -504,7 +504,7 @@
including multiple file events, one-shot support, and unmount
notification.
- For more information, see Documentation/filesystems/inotify.txt
+ For more information, see <file:Documentation/filesystems/inotify.txt>
If unsure, say Y.
@@ -518,7 +518,7 @@
directories via a single open fd. Events are read from the file
descriptor, which is also select()- and poll()-able.
- For more information, see Documentation/filesystems/inotify.txt
+ For more information, see <file:Documentation/filesystems/inotify.txt>
If unsure, say Y.
@@ -1089,7 +1089,7 @@
depends on EXPERIMENTAL && KEYS && CRYPTO && NET
help
Encrypted filesystem that operates on the VFS layer. See
- <file:Documentation/ecryptfs.txt> to learn more about
+ <file:Documentation/filesystems/ecryptfs.txt> to learn more about
eCryptfs. Userspace components are required and can be
obtained from <http://ecryptfs.sf.net>.
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index a4284cc..bd26e4c 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -322,7 +322,7 @@
int err;
uifr = compat_alloc_user_space(sizeof(struct ifreq));
- if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32)));
+ if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32)))
return -EFAULT;
err = sys_ioctl(fd, SIOCGIFNAME, (unsigned long)uifr);
diff --git a/fs/locks.c b/fs/locks.c
index 0127a28..8b8388e 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -696,17 +696,28 @@
* Note: the above assumption may not be true when handling lock requests
* from a broken NFS client. But broken NFS clients have a lot more to
* worry about than proper deadlock detection anyway... --okir
+ *
+ * However, the failure of this assumption (also possible in the case of
+ * multiple tasks sharing the same open file table) also means there's no
+ * guarantee that the loop below will terminate. As a hack, we give up
+ * after a few iterations.
*/
+
+#define MAX_DEADLK_ITERATIONS 10
+
static int posix_locks_deadlock(struct file_lock *caller_fl,
struct file_lock *block_fl)
{
struct file_lock *fl;
+ int i = 0;
next_task:
if (posix_same_owner(caller_fl, block_fl))
return 1;
list_for_each_entry(fl, &blocked_list, fl_link) {
if (posix_same_owner(fl, block_fl)) {
+ if (i++ > MAX_DEADLK_ITERATIONS)
+ return 0;
fl = fl->fl_next;
block_fl = fl;
goto next_task;
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index cfdc790..ad87cb0 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -405,6 +405,15 @@
retry_readpage:
BUG_ON(!PageLocked(page));
+ vi = page->mapping->host;
+ i_size = i_size_read(vi);
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT)) {
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Read outside i_size - truncated?");
+ goto done;
+ }
/*
* This can potentially happen because we clear PageUptodate() during
* ntfs_writepage() of MstProtected() attributes.
@@ -413,7 +422,6 @@
unlock_page(page);
return 0;
}
- vi = page->mapping->host;
ni = NTFS_I(vi);
/*
* Only $DATA attributes can be encrypted and only unnamed $DATA
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index 92dabdc..50d3b0c 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -179,10 +179,7 @@
* ntfs_mapping_pairs_decompress() fails.
*/
end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn) + 1;
- if (!a->data.non_resident.lowest_vcn && end_vcn == 1)
- end_vcn = sle64_to_cpu(a->data.non_resident.allocated_size) >>
- ni->vol->cluster_size_bits;
- if (unlikely(vcn >= end_vcn)) {
+ if (unlikely(vcn && vcn >= end_vcn)) {
err = -ENOENT;
goto err_out;
}
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index d98daf5..d1619d0 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -561,6 +561,16 @@
read_unlock_irqrestore(&ni->size_lock, flags);
max_page = ((i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) -
offset;
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (xpage >= max_page) {
+ kfree(bhs);
+ kfree(pages);
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Compressed read outside i_size - truncated?");
+ SetPageUptodate(page);
+ unlock_page(page);
+ return 0;
+ }
if (nr_pages < max_page)
max_page = nr_pages;
for (i = 0; i < max_page; i++, offset++) {
diff --git a/fs/proc/array.c b/fs/proc/array.c
index d80baaa..eba339e 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -374,7 +374,8 @@
stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
cputime_to_clock_t(task_utime(p));
- return clock_t_to_cputime(stime);
+ p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+ return p->prev_stime;
}
#endif
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 7a8ce9e..3371629 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -132,7 +132,7 @@
* RETURNS:
* Pointer to @sd on success, NULL on failure.
*/
-struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
+static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
{
if (unlikely(!sd))
return NULL;
@@ -161,7 +161,7 @@
* Put an active reference to @sd. This function is noop if @sd
* is NULL.
*/
-void sysfs_put_active(struct sysfs_dirent *sd)
+static void sysfs_put_active(struct sysfs_dirent *sd)
{
struct completion *cmpl;
int v;
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index f841798..ff17f8d 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -103,8 +103,6 @@
extern const struct inode_operations sysfs_dir_inode_operations;
struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
-void sysfs_put_active(struct sysfs_dirent *sd);
struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
void sysfs_put_active_two(struct sysfs_dirent *sd);
void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 584cf12..c78c04f 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -933,20 +933,19 @@
goto again;
}
- /* Set sbi->s_flags here, used by ufs_get_fs_state() below */
- sbi->s_flags = flags;
+ sbi->s_flags = flags;/*after that line some functions use s_flags*/
ufs_print_super_stuff(sb, usb1, usb2, usb3);
/*
* Check, if file system was correctly unmounted.
* If not, make it read only.
*/
- if ((((flags & UFS_ST_MASK) == UFS_ST_44BSD) ||
- ((flags & UFS_ST_MASK) == UFS_ST_OLD) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUN) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUNOS) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUNx86)) &&
- (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time)))) {
+ if (((flags & UFS_ST_MASK) == UFS_ST_44BSD) ||
+ ((flags & UFS_ST_MASK) == UFS_ST_OLD) ||
+ (((flags & UFS_ST_MASK) == UFS_ST_SUN ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNx86) &&
+ (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time))))) {
switch(usb1->fs_clean) {
case UFS_FSCLEAN:
UFSD("fs is clean\n");
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7b74b60..19c3ead 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -168,8 +168,7 @@
u32 power_manageable:1;
u32 performance_manageable:1;
u32 wake_capable:1; /* Wakeup(_PRW) supported? */
- u32 force_power_state:1;
- u32 reserved:19;
+ u32 reserved:20;
};
/* File System */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index d96b10f..c0d7075 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -130,4 +130,7 @@
extern u8 at91_leds_timer;
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
#endif
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
index ea24a0e..ff8de30 100644
--- a/include/asm-arm/arch-davinci/gpio.h
+++ b/include/asm-arm/arch-davinci/gpio.h
@@ -13,6 +13,9 @@
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
+#include <linux/io.h>
+#include <asm/hardware.h>
+
/*
* basic gpio routines
*
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
index 7513c7a..822a27c 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa300.h
@@ -4,7 +4,7 @@
* PXA300/PXA310 specific MFP configuration definitions
*
* Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
index ae8ba34..488a5bb 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa320.h
@@ -4,7 +4,7 @@
* PXA320 specific MFP configuration definitions
*
* Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
index 6029174..ac4157a 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/include/asm-arm/arch-pxa/mfp.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell International Ltd.
*
- * 2007-8-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h
index 16f5375..9918aa4 100644
--- a/include/asm-arm/flat.h
+++ b/include/asm-arm/flat.h
@@ -11,8 +11,9 @@
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
#endif /* __ARM_FLAT_H__ */
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index b824d37..d742205 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -35,7 +35,7 @@
#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC S3C24E10_NFREG(0x34)
+#define S3C2440_NFSECC S3C2410_NFREG(0x34)
#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 14cb8d3..0212e18 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -80,6 +80,7 @@
extern int atomic_ior32(void);
extern int atomic_and32(void);
extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
extern void sigreturn_stub(void);
extern void *l1_data_A_sram_alloc(size_t);
diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h
index e6df84e..37db66c 100644
--- a/include/asm-blackfin/fixed_code.h
+++ b/include/asm-blackfin/fixed_code.h
@@ -17,4 +17,6 @@
#define ATOMIC_SEQS_END 0x480
-#define FIXED_CODE_END 0x480
+#define SAFE_USER_INSTRUCTION 0x480
+
+#define FIXED_CODE_END 0x490
diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h
index c97ab03..8265ea4 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/include/asm-blackfin/gptimers.h
@@ -197,6 +197,8 @@
uint32_t get_gptimer_count (int timer_id);
uint16_t get_gptimer_intr (int timer_id);
void clear_gptimer_intr (int timer_id);
+uint16_t get_gptimer_over (int timer_id);
+void clear_gptimer_over (int timer_id);
void set_gptimer_config (int timer_id, uint16_t config);
uint16_t get_gptimer_config (int timer_id);
void set_gptimer_pulse_hi (int timer_id);
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h
index d6c24c5..fc69cf9 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h
@@ -1718,55 +1718,55 @@
/* Bit masks for HOST_CONTROL */
-#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
-#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
-#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
-#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
-#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
-#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
-#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
+#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
+#define HOST_CNTR_nHOST_EN 0x0
+#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
+#define HOST_CNTR_nHOST_END 0x0
+#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
+#define HOST_CNTR_nDATA_SIZE 0x0
+#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
+#define HOST_CNTR_nHOST_RST 0x0
+#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
+#define HOST_CNTR_nHRDY_OVR 0x0
+#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
+#define HOST_CNTR_nINT_MODE 0x0
+#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
+#define HOST_CNTR_ nBT_EN 0x0
+#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
+#define HOST_CNTR_nEHW 0x0
+#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
+#define HOST_CNTR_nEHR 0x0
+#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
+#define HOST_CNTR_nBDR 0x0
/* Bit masks for HOST_STATUS */
-#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
-#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
-#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
-#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
-#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
-#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
-#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
-#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
-#define nHOSTRD_DONE 0x0
+#define HOST_STAT_READY 0x1 /* DMA Ready */
+#define HOST_STAT_nREADY 0x0
+#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
+#define HOST_STAT_nFIFOFULL 0x0
+#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
+#define HOST_STAT_nFIFOEMPTY 0x0
+#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
+#define HOST_STAT_nCOMPLETE 0x0
+#define HOST_STAT_HSHK 0x10 /* Host Handshake */
+#define HOST_STAT_nHSHK 0x0
+#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
+#define HOST_STAT_nTIMEOUT 0x0
+#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
+#define HOST_STAT_nHIRQ 0x0
+#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
+#define HOST_STAT_nALLOW_CNFG 0x0
+#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
+#define HOST_STAT_nDMA_DIR 0x0
+#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
+#define HOST_STAT_nBTE 0x0
+#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
+#define HOST_STAT_nHOSTRD_DONE 0x0
/* Bit masks for HOST_TIMEOUT */
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
+#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for CNT_CONFIG */
diff --git a/include/asm-blackfin/mach-bf527/dma.h b/include/asm-blackfin/mach-bf527/dma.h
index a41627a..2dfee12 100644
--- a/include/asm-blackfin/mach-bf527/dma.h
+++ b/include/asm-blackfin/mach-bf527/dma.h
@@ -35,7 +35,6 @@
#define MAX_BLACKFIN_DMA_CHANNEL 16
#define CH_PPI 0 /* PPI receive/transmit or NFC */
-#define CH_NFC 0 /* PPI receive/transmit or NFC */
#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */
#define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */
#define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */
@@ -54,6 +53,12 @@
#define CH_MEM_STREAM1_DEST 14 /* TX */
#define CH_MEM_STREAM1_SRC 15 /* RX */
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */
+#endif
+
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index 4e46d65..fcb72b4 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -1671,7 +1671,7 @@
/* Bit masks for MXVR_DMAx_CONFIG */
#define MDMAEN 0x1 /* DMA Channel Enable */
-#define DD 0x2 /* DMA Channel Direction */
+#define DMADD 0x2 /* DMA Channel Direction */
#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 1d365c8..da979cb 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -2252,6 +2252,13 @@
#define PLL_OFF 0x2 /* Disable PLL */
#define DF 0x1 /* Divide Frequency */
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
/* Bit masks for PLL_STAT */
#define PLL_LOCKED 0x20 /* PLL Locked Status */
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h
index b382deb..6b48512 100644
--- a/include/asm-blackfin/mach-bf548/portmux.h
+++ b/include/asm-blackfin/mach-bf548/portmux.h
@@ -267,4 +267,18 @@
#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+#define P_NAND_D0 (P_DONTCARE)
+#define P_NAND_D1 (P_DONTCARE)
+#define P_NAND_D2 (P_DONTCARE)
+#define P_NAND_D3 (P_DONTCARE)
+#define P_NAND_D4 (P_DONTCARE)
+#define P_NAND_D5 (P_DONTCARE)
+#define P_NAND_D6 (P_DONTCARE)
+#define P_NAND_D7 (P_DONTCARE)
+#define P_NAND_WE (P_DONTCARE)
+#define P_NAND_RE (P_DONTCARE)
+#define P_NAND_CLE (P_DONTCARE)
+#define P_NAND_ALE (P_DONTCARE)
+
#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index bf7dc4e..7945e8a 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -55,6 +55,9 @@
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define SWRST SICA_SWRST
#define SYSCR SICA_SYSCR
+#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE (SWRST_OCCURRED)
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
index 43a7aac..c4f1e32 100644
--- a/include/asm-ia64/percpu.h
+++ b/include/asm-ia64/percpu.h
@@ -46,7 +46,7 @@
#ifdef CONFIG_SMP
extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset(x))
+#define per_cpu_offset(x) (__per_cpu_offset[x])
/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
index 471cc2e..4fa733d 100644
--- a/include/asm-ia64/smp.h
+++ b/include/asm-ia64/smp.h
@@ -60,7 +60,6 @@
extern cpumask_t cpu_core_map[NR_CPUS];
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
extern int smp_num_siblings;
-extern int smp_num_cpucores;
extern void __iomem *ipi_base_addr;
extern unsigned char smp_int_redirect;
diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h
index affb32c..032ca73 100644
--- a/include/asm-mips/i8253.h
+++ b/include/asm-mips/i8253.h
@@ -5,25 +5,14 @@
#ifndef __ASM_I8253_H
#define __ASM_I8253_H
+#include <linux/spinlock.h>
+
/* i8253A PIT registers */
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
-/* i8259A PIC registers */
-#define PIC_MASTER_CMD 0x20
-#define PIC_MASTER_IMR 0x21
-#define PIC_MASTER_ISR PIC_MASTER_CMD
-#define PIC_MASTER_POLL PIC_MASTER_ISR
-#define PIC_MASTER_OCW3 PIC_MASTER_ISR
-#define PIC_SLAVE_CMD 0xa0
-#define PIC_SLAVE_IMR 0xa1
-
-/* i8259A PIC related value */
-#define PIC_CASCADE_IR 2
-#define MASTER_ICW4_DEFAULT 0x01
-#define SLAVE_ICW4_DEFAULT 0x01
-#define PIC_ICW4_AEOI 2
+extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
diff --git a/include/asm-mips/mach-au1x00/timex.h b/include/asm-mips/mach-au1x00/timex.h
deleted file mode 100644
index e3ada66..0000000
--- a/include/asm-mips/mach-au1x00/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_MACH_AU1X00_TIMEX_H
-#define __ASM_MACH_AU1X00_TIMEX_H
-
-#define CLOCK_TICK_RATE ((HZ * 100000UL) / 2)
-
-#endif /* __ASM_MACH_AU1X00_TIMEX_H */
diff --git a/include/asm-mips/mach-cobalt/irq.h b/include/asm-mips/mach-cobalt/irq.h
index 179d0e8..57c8c9a 100644
--- a/include/asm-mips/mach-cobalt/irq.h
+++ b/include/asm-mips/mach-cobalt/irq.h
@@ -35,7 +35,7 @@
* 4 - ethernet
* 5 - 16550 UART
* 6 - cascade i8259
- * 7 - CP0 counter (unused)
+ * 7 - CP0 counter
*/
#define MIPS_CPU_IRQ_BASE 16
@@ -48,7 +48,6 @@
#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5)
#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6)
-
#define GT641XX_IRQ_BASE 24
#include <asm/irq_gt641xx.h>
diff --git a/include/asm-mips/mach-generic/timex.h b/include/asm-mips/mach-generic/timex.h
deleted file mode 100644
index 48b4cfa..0000000
--- a/include/asm-mips/mach-generic/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2005 by Ralf Baechle
- */
-#ifndef __ASM_MACH_GENERIC_TIMEX_H
-#define __ASM_MACH_GENERIC_TIMEX_H
-
-#define CLOCK_TICK_RATE 500000
-
-#endif /* __ASM_MACH_GENERIC_TIMEX_H */
diff --git a/include/asm-mips/mach-jazz/timex.h b/include/asm-mips/mach-jazz/timex.h
deleted file mode 100644
index 93affa3..0000000
--- a/include/asm-mips/mach-jazz/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_MACH_JAZZ_TIMEX_H
-#define __ASM_MACH_JAZZ_TIMEX_H
-
-/*
- * Jazz is still using the R4030 100Hz counter
- */
-#define CLOCK_TICK_RATE 100
-
-#endif /* __ASM_MACH_JAZZ_TIMEX_H */
diff --git a/include/asm-mips/mach-qemu/timex.h b/include/asm-mips/mach-qemu/timex.h
deleted file mode 100644
index cd54369..0000000
--- a/include/asm-mips/mach-qemu/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Daniel Jacobowitz
- */
-#ifndef __ASM_MACH_QEMU_TIMEX_H
-#define __ASM_MACH_QEMU_TIMEX_H
-
-/*
- * We use a simulated i8254 PIC...
- */
-#define CLOCK_TICK_RATE 1193182
-
-#endif /* __ASM_MACH_QEMU_TIMEX_H */
diff --git a/include/asm-mips/mach-rm/timex.h b/include/asm-mips/mach-rm/timex.h
deleted file mode 100644
index 11ff6cb..0000000
--- a/include/asm-mips/mach-rm/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2005 by Ralf Baechle
- */
-#ifndef __ASM_MACH_RM200_TIMEX_H
-#define __ASM_MACH_RM200_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193182
-
-#endif /* __ASM_MACH_RM200_TIMEX_H */
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index 0a6bc7d..ee1663e 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -10,15 +10,10 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
- * Please refer to Documentation/mips/time.README.
*/
#ifndef _ASM_TIME_H
#define _ASM_TIME_H
-#include <linux/interrupt.h>
-#include <linux/linkage.h>
-#include <linux/ptrace.h>
#include <linux/rtc.h>
#include <linux/spinlock.h>
#include <linux/clockchips.h>
@@ -38,25 +33,12 @@
/*
* Timer interrupt functions.
* mips_timer_state is needed for high precision timer calibration.
- * mips_timer_ack may be NULL if the interrupt is self-recoverable.
*/
extern int (*mips_timer_state)(void);
/*
- * High precision timer clocksource.
- * If .read is NULL, an R4k-compatible timer setup is attempted.
- */
-extern struct clocksource clocksource_mips;
-
-/*
- * profiling and process accouting is done separately in local_timer_interrupt
- */
-extern void local_timer_interrupt(int irq, void *dev_id);
-
-/*
* board specific routines required by time_init().
*/
-struct irqaction;
extern void plat_time_init(void);
/*
diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h
index 87c68ae..5816ad1 100644
--- a/include/asm-mips/timex.h
+++ b/include/asm-mips/timex.h
@@ -13,27 +13,12 @@
#include <asm/mipsregs.h>
/*
- * This is the frequency of the timer used for Linux's timer interrupt.
- * The value should be defined as accurate as possible or under certain
- * circumstances Linux timekeeping might become inaccurate or fail.
- *
- * For many system the exact clockrate of the timer isn't known but due to
- * the way this value is used we can get away with a wrong value as long
- * as this value is:
- *
- * - a multiple of HZ
- * - a divisor of the actual rate
- *
- * 500000 is a good such cheat value.
- *
- * The obscure number 1193182 is the same as used by the original i8254
- * time in legacy PC hardware; the chip unfortunately also found in a
- * bunch of MIPS systems. The last remaining user of the i8254 for the
- * timer interrupt is the RM200; it's a very standard system so there is
- * no reason to make this a separate architecture.
+ * This is the clock rate of the i8253 PIT. A MIPS system may not have
+ * a PIT by the symbol is used all over the kernel including some APIs.
+ * So keeping it defined to the number for the PIT is the only sane thing
+ * for now.
*/
-
-#include <timex.h>
+#define CLOCK_TICK_RATE 1193182
/*
* Standard way to access the cycle counter.
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
index 7a18649..01e5cf5 100644
--- a/include/asm-sh/cache.h
+++ b/include/asm-sh/cache.h
@@ -18,9 +18,8 @@
#define SH_CACHE_ASSOC 8
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
#ifndef __ASSEMBLY__
struct cache_info {
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index c61d902..11850f6 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -41,7 +41,7 @@
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
extern void irq_ctx_init(int cpu);
extern void irq_ctx_exit(int cpu);
# define __ARCH_HAS_DO_SOFTIRQ
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index cb3d46c..3aa8b07 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -128,7 +128,6 @@
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT))
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
/* PFN start number, because of __MEMORY_START */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index cf0dd2b..0b1d7c6 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -399,7 +399,7 @@
#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
/*
* The following only work if pte_present() is true.
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 4f2922a..ab0028d 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -71,7 +71,7 @@
struct cache_info scache; /* Secondary cache */
unsigned long flags;
-} __attribute__ ((aligned(SMP_CACHE_BYTES)));
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
extern struct sh_cpuinfo cpu_data[];
#define boot_cpu_data cpu_data[0]
diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h
index 586a971..55a2bd3 100644
--- a/include/asm-sh/setup.h
+++ b/include/asm-sh/setup.h
@@ -5,6 +5,20 @@
#ifdef __KERNEL__
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM ((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
int setup_early_printk(char *);
void sh_mv_setup(void);
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
index 876312f..df1097d 100644
--- a/include/asm-sparc64/futex.h
+++ b/include/asm-sparc64/futex.h
@@ -17,7 +17,8 @@
"3:\n" \
" .section .fixup,#alloc,#execinstr\n" \
" .align 4\n" \
- "4: ba 3b\n" \
+ "4: sethi %%hi(3b), %0\n" \
+ " jmpl %0 + %%lo(3b), %%g0\n" \
" mov %5, %0\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
@@ -91,7 +92,8 @@
"2:\n"
" .section .fixup,#alloc,#execinstr\n"
" .align 4\n"
- "3: ba 2b\n"
+ "3: sethi %%hi(2b), %0\n"
+ " jmpl %0 + %%lo(2b), %%g0\n"
" mov %4, %0\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
index 159e62b..99a669c 100644
--- a/include/asm-sparc64/system.h
+++ b/include/asm-sparc64/system.h
@@ -178,7 +178,9 @@
"ldx [%%g6 + %9], %%g4\n\t" \
"brz,pt %%o7, 1f\n\t" \
" mov %%g7, %0\n\t" \
- "b,a ret_from_syscall\n\t" \
+ "sethi %%hi(ret_from_syscall), %%g1\n\t" \
+ "jmpl %%g1 + %%lo(ret_from_syscall), %%g0\n\t" \
+ " nop\n\t" \
"1:\n\t" \
: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg), \
"=r" (__local_per_cpu_offset) \
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
index afe236b..93720e7 100644
--- a/include/asm-sparc64/uaccess.h
+++ b/include/asm-sparc64/uaccess.h
@@ -123,7 +123,8 @@
".section .fixup,#alloc,#execinstr\n\t" \
".align 4\n" \
"3:\n\t" \
- "b 2b\n\t" \
+ "sethi %%hi(2b), %0\n\t" \
+ "jmpl %0 + %%lo(2b), %%g0\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
".section __ex_table,\"a\"\n\t" \
@@ -165,8 +166,9 @@
".section .fixup,#alloc,#execinstr\n\t" \
".align 4\n" \
"3:\n\t" \
+ "sethi %%hi(2b), %0\n\t" \
"clr %1\n\t" \
- "b 2b\n\t" \
+ "jmpl %0 + %%lo(2b), %%g0\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
".section __ex_table,\"a\"\n\t" \
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
new file mode 100644
index 0000000..f704c50
--- /dev/null
+++ b/include/asm-x86/gart.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X8664_IOMMU_H
+#define _ASM_X8664_IOMMU_H 1
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+#ifdef CONFIG_GART_IOMMU
+extern void gart_iommu_init(void);
+extern void gart_iommu_shutdown(void);
+extern void __init gart_parse_options(char *);
+extern void gart_iommu_hole_init(void);
+extern int fallback_aper_order;
+extern int fallback_aper_force;
+extern int gart_iommu_aperture;
+extern int gart_iommu_aperture_allowed;
+extern int gart_iommu_aperture_disabled;
+extern int fix_aperture;
+#else
+#define gart_iommu_aperture 0
+#define gart_iommu_aperture_allowed 0
+
+static inline void gart_iommu_shutdown(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index 5af471f..07862fd 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X8664_IOMMU_H
-#define _ASM_X8664_IOMMU_H 1
+#ifndef _ASM_X8664_GART_H
+#define _ASM_X8664_GART_H 1
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h
index 9baa46d..ef54226 100644
--- a/include/asm-x86/pci_64.h
+++ b/include/asm-x86/pci_64.h
@@ -37,7 +37,7 @@
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
+#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 6a65231..37bfa19 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -149,6 +149,7 @@
header-y += times.h
header-y += tiocl.h
header-y += tipc.h
+header-y += tipc_config.h
header-y += toshiba.h
header-y += ultrasound.h
header-y += un.h
@@ -325,6 +326,7 @@
unifdef-y += soundcard.h
unifdef-y += stat.h
unifdef-y += stddef.h
+unifdef-y += string.h
unifdef-y += synclink.h
unifdef-y += sysctl.h
unifdef-y += tcp.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 128dc7a..61535e7 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -43,6 +43,7 @@
ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
+ ATA_MAX_SECTORS_TAPE = 65535,
ATA_ID_WORDS = 256,
ATA_ID_SERNO = 10,
@@ -544,6 +545,11 @@
}
}
+static inline int atapi_command_packet_set(const u16 *dev_id)
+{
+ return (dev_id[0] >> 8) & 0x1f;
+}
+
static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
diff --git a/include/linux/input.h b/include/linux/input.h
index 6226892..b45f240 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -527,6 +527,9 @@
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index 56ae438..6e8cec5 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -173,7 +173,7 @@
id->firmware_revision_2 = data[3];
id->ipmi_version = data[4];
id->additional_device_support = data[5];
- if (data_len >= 6) {
+ if (data_len >= 11) {
id->manufacturer_id = (data[6] | (data[7] << 8) |
(data[8] << 16));
id->product_id = data[9] | (data[10] << 8);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 147ccc4..1e27785 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -221,6 +221,7 @@
ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
+ ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index 8df230a..30e11aa 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -8,9 +8,9 @@
#define MV643XX_ETH_NAME "mv643xx_eth"
#define MV643XX_ETH_SHARED_REGS 0x2000
#define MV643XX_ETH_SHARED_REGS_SIZE 0x2000
-#define MV643XX_ETH_BAR_4 0x220
-#define MV643XX_ETH_SIZE_REG_4 0x224
-#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x0290
+#define MV643XX_ETH_BAR_4 0x2220
+#define MV643XX_ETH_SIZE_REG_4 0x2224
+#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290
struct mv643xx_eth_platform_data {
int port_number;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9b0c8f1..1e6af4f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -739,6 +739,16 @@
*/
#define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev))
+/**
+ * netif_napi_add - initialize a napi context
+ * @dev: network device
+ * @napi: napi context
+ * @poll: polling function
+ * @weight: default weight
+ *
+ * netif_napi_add() must be used to initialize a napi context prior to calling
+ * *any* of the other napi related functions.
+ */
static inline void netif_napi_add(struct net_device *dev,
struct napi_struct *napi,
int (*poll)(struct napi_struct *, int),
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b0b1fe6..155d743 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1009,7 +1009,7 @@
unsigned int rt_priority;
cputime_t utime, stime, utimescaled, stimescaled;
cputime_t gtime;
- cputime_t prev_utime;
+ cputime_t prev_utime, prev_stime;
unsigned long nvcsw, nivcsw; /* context switch counts */
struct timespec start_time; /* monotonic time */
struct timespec real_start_time; /* boot based time */
diff --git a/include/linux/string.h b/include/linux/string.h
index 836062b..c5d3fca 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -3,16 +3,14 @@
/* We don't want strings.h stuff being user by user stuff by accident */
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+#include <string.h>
+#else
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
extern char *strndup_user(const char __user *, long);
/*
@@ -111,9 +109,5 @@
extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
extern void argv_free(char **argv);
-#ifdef __cplusplus
-}
-#endif
-
#endif
#endif /* _LINUX_STRING_H_ */
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 5279466..1fd449a 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -51,13 +51,12 @@
}
#endif
+#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
static inline struct net *get_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_inc(&net->count);
-#endif
return net;
}
@@ -75,26 +74,44 @@
static inline void put_net(struct net *net)
{
-#ifdef CONFIG_NET
if (atomic_dec_and_test(&net->count))
__put_net(net);
-#endif
}
static inline struct net *hold_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_inc(&net->use_count);
-#endif
return net;
}
static inline void release_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_dec(&net->use_count);
-#endif
}
+#else
+static inline struct net *get_net(struct net *net)
+{
+ return net;
+}
+
+static inline void put_net(struct net *net)
+{
+}
+
+static inline struct net *hold_net(struct net *net)
+{
+ return net;
+}
+
+static inline void release_net(struct net *net)
+{
+}
+
+static inline struct net *maybe_get_net(struct net *net)
+{
+ return net;
+}
+#endif
#define for_each_net(VAR) \
list_for_each_entry(VAR, &net_namespace_list, list)
diff --git a/include/net/sock.h b/include/net/sock.h
index 43fc3fa..20de3fa 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -779,7 +779,7 @@
extern struct sock *sk_alloc(struct net *net, int family,
gfp_t priority,
- struct proto *prot, int zero_it);
+ struct proto *prot);
extern void sk_free(struct sock *sk);
extern struct sock *sk_clone(const struct sock *sk,
const gfp_t priority);
@@ -993,20 +993,6 @@
write_unlock_bh(&sk->sk_callback_lock);
}
-static inline void sock_copy(struct sock *nsk, const struct sock *osk)
-{
-#ifdef CONFIG_SECURITY_NETWORK
- void *sptr = nsk->sk_security;
-#endif
-
- memcpy(nsk, osk, osk->sk_prot->obj_size);
- get_net(nsk->sk_net);
-#ifdef CONFIG_SECURITY_NETWORK
- nsk->sk_security = sptr;
- security_sk_clone(osk, nsk);
-#endif
-}
-
extern int sock_i_uid(struct sock *sk);
extern unsigned long sock_i_ino(struct sock *sk);
diff --git a/kernel/fork.c b/kernel/fork.c
index a65bfc4..28a7401 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1057,6 +1057,7 @@
p->utimescaled = cputime_zero;
p->stimescaled = cputime_zero;
p->prev_utime = cputime_zero;
+ p->prev_stime = cputime_zero;
#ifdef CONFIG_TASK_XACCT
p->rchar = 0; /* I/O counter: bytes read */
diff --git a/kernel/signal.c b/kernel/signal.c
index 4537bdd..909a0cc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -124,7 +124,7 @@
void recalc_sigpending(void)
{
- if (!recalc_sigpending_tsk(current))
+ if (!recalc_sigpending_tsk(current) && !freezing(current))
clear_thread_flag(TIF_SIGPENDING);
}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 52c7a15..56cb009 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -40,10 +40,14 @@
cond_syscall(sys_recv);
cond_syscall(sys_socket);
cond_syscall(sys_setsockopt);
+cond_syscall(compat_sys_setsockopt);
cond_syscall(sys_getsockopt);
+cond_syscall(compat_sys_getsockopt);
cond_syscall(sys_shutdown);
cond_syscall(sys_sendmsg);
+cond_syscall(compat_sys_sendmsg);
cond_syscall(sys_recvmsg);
+cond_syscall(compat_sys_recvmsg);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
diff --git a/lib/kobject.c b/lib/kobject.c
index 03d4036..a7e3bf4 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -308,6 +308,19 @@
if (!kobj->parent)
return -EINVAL;
+ /* see if this name is already in use */
+ if (kobj->kset) {
+ struct kobject *temp_kobj;
+ temp_kobj = kset_find_obj(kobj->kset, new_name);
+ if (temp_kobj) {
+ printk(KERN_WARNING "kobject '%s' can not be renamed "
+ "to '%s' as '%s' is already in existance.\n",
+ kobject_name(kobj), new_name, new_name);
+ kobject_put(temp_kobj);
+ return -EINVAL;
+ }
+ }
+
devpath = kobject_get_path(kobj, GFP_KERNEL);
if (!devpath) {
error = -ENOMEM;
diff --git a/mm/filemap.c b/mm/filemap.c
index 7c86436..188cf5f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1300,7 +1300,7 @@
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (vmf->pgoff >= size)
- goto outside_data_content;
+ return VM_FAULT_SIGBUS;
/* If we don't want any read-ahead, don't bother */
if (VM_RandomReadHint(vma))
@@ -1377,7 +1377,7 @@
if (unlikely(vmf->pgoff >= size)) {
unlock_page(page);
page_cache_release(page);
- goto outside_data_content;
+ return VM_FAULT_SIGBUS;
}
/*
@@ -1388,15 +1388,6 @@
vmf->page = page;
return ret | VM_FAULT_LOCKED;
-outside_data_content:
- /*
- * An external ptracer can access pages that normally aren't
- * accessible..
- */
- if (vma->vm_mm == current->mm)
- return VM_FAULT_SIGBUS;
-
- /* Fall through to the non-read-ahead case */
no_cached_page:
/*
* We're only likely to ever get here if MADV_RANDOM is in
@@ -2511,21 +2502,17 @@
}
retval = mapping->a_ops->direct_IO(rw, iocb, iov, offset, nr_segs);
- if (retval)
- goto out;
/*
* Finally, try again to invalidate clean pages which might have been
- * faulted in by get_user_pages() if the source of the write was an
- * mmap()ed region of the file we're writing. That's a pretty crazy
- * thing to do, so we don't support it 100%. If this invalidation
- * fails and we have -EIOCBQUEUED we ignore the failure.
+ * cached by non-direct readahead, or faulted in by get_user_pages()
+ * if the source of the write was an mmap'ed region of the file
+ * we're writing. Either one is a pretty crazy thing to do,
+ * so we don't support it 100%. If this invalidation
+ * fails, tough, the write still worked...
*/
if (rw == WRITE && mapping->nrpages) {
- int err = invalidate_inode_pages2_range(mapping,
- offset >> PAGE_CACHE_SHIFT, end);
- if (err && retval >= 0)
- retval = err;
+ invalidate_inode_pages2_range(mapping, offset >> PAGE_CACHE_SHIFT, end);
}
out:
return retval;
diff --git a/mm/shmem.c b/mm/shmem.c
index 404e53b..253d20591 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -915,6 +915,21 @@
struct inode *inode;
BUG_ON(!PageLocked(page));
+ /*
+ * shmem_backing_dev_info's capabilities prevent regular writeback or
+ * sync from ever calling shmem_writepage; but a stacking filesystem
+ * may use the ->writepage of its underlying filesystem, in which case
+ * we want to do nothing when that underlying filesystem is tmpfs
+ * (writing out to swap is useful as a response to memory pressure, but
+ * of no use to stabilize the data) - just redirty the page, unlock it
+ * and claim success in this case. AOP_WRITEPAGE_ACTIVATE, and the
+ * page_mapped check below, must be avoided unless we're in reclaim.
+ */
+ if (!wbc->for_reclaim) {
+ set_page_dirty(page);
+ unlock_page(page);
+ return 0;
+ }
BUG_ON(page_mapped(page));
mapping = page->mapping;
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index d3b718b..22620f6 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
+#include <linux/sched.h>
#include <asm/dma.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 7c0b515..e0d37d6 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1044,7 +1044,7 @@
if (sock->type != SOCK_RAW && sock->type != SOCK_DGRAM)
goto out;
rc = -ENOMEM;
- sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto, 1);
+ sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto);
if (!sk)
goto out;
rc = 0;
diff --git a/net/atm/common.c b/net/atm/common.c
index e166d9e..eba09a0 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -133,7 +133,7 @@
sock->sk = NULL;
if (sock->type == SOCK_STREAM)
return -EINVAL;
- sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto, 1);
+ sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto);
if (!sk)
return -ENOMEM;
sock_init_data(sock, sk);
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 993e5c7..8378afd 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -836,7 +836,8 @@
return -ESOCKTNOSUPPORT;
}
- if ((sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto);
+ if (sk == NULL)
return -ENOMEM;
ax25 = sk->sk_protinfo = ax25_create_cb();
@@ -861,7 +862,8 @@
struct sock *sk;
ax25_cb *ax25, *oax25;
- if ((sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot);
+ if (sk == NULL)
return NULL;
if ((ax25 = ax25_create_cb()) == NULL) {
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index f718965..9ebd3c6 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -213,7 +213,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index cf700c2..783edab 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -204,7 +204,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 8825102..1499132 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -645,7 +645,7 @@
sock->ops = &hci_sock_ops;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 1de2b6f..3292b95 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -255,7 +255,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 6fbbae7..477e052 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -607,7 +607,7 @@
{
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto);
if (!sk)
return NULL;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 266b697..c46d510 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -287,7 +287,7 @@
struct rfcomm_dlc *d;
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto);
if (!sk)
return NULL;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 82d0dfdf..93ad1aa 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -421,7 +421,7 @@
{
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto);
if (!sk)
return NULL;
diff --git a/net/core/dev.c b/net/core/dev.c
index 853c8b5..be6ceda 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1751,9 +1751,6 @@
*
* return values:
* NET_RX_SUCCESS (no congestion)
- * NET_RX_CN_LOW (low congestion)
- * NET_RX_CN_MOD (moderate congestion)
- * NET_RX_CN_HIGH (high congestion)
* NET_RX_DROP (packet was dropped)
*
*/
@@ -2001,6 +1998,21 @@
}
#endif
+/**
+ * netif_receive_skb - process receive buffer from network
+ * @skb: buffer to process
+ *
+ * netif_receive_skb() is the main receive data processing function.
+ * It always succeeds. The buffer may be dropped during processing
+ * for congestion control or by the protocol layers.
+ *
+ * This function may only be called from softirq context and interrupts
+ * should be enabled.
+ *
+ * Return values (usually ignored):
+ * NET_RX_SUCCESS: no congestion
+ * NET_RX_DROP: packet was dropped
+ */
int netif_receive_skb(struct sk_buff *skb)
{
struct packet_type *ptype, *pt_prev;
@@ -2172,7 +2184,15 @@
weight = n->weight;
- work = n->poll(n, weight);
+ /* This NAPI_STATE_SCHED test is for avoiding a race
+ * with netpoll's poll_napi(). Only the entity which
+ * obtains the lock and sees NAPI_STATE_SCHED set will
+ * actually make the ->poll() call. Therefore we avoid
+ * accidently calling ->poll() when NAPI is not scheduled.
+ */
+ work = 0;
+ if (test_bit(NAPI_STATE_SCHED, &n->state))
+ work = n->poll(n, weight);
WARN_ON_ONCE(work > weight);
@@ -3488,6 +3508,60 @@
spin_unlock(&net_todo_list_lock);
}
+static void rollback_registered(struct net_device *dev)
+{
+ BUG_ON(dev_boot_phase);
+ ASSERT_RTNL();
+
+ /* Some devices call without registering for initialization unwind. */
+ if (dev->reg_state == NETREG_UNINITIALIZED) {
+ printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
+ "was registered\n", dev->name, dev);
+
+ WARN_ON(1);
+ return;
+ }
+
+ BUG_ON(dev->reg_state != NETREG_REGISTERED);
+
+ /* If device is running, close it first. */
+ dev_close(dev);
+
+ /* And unlink it from device chain. */
+ unlist_netdevice(dev);
+
+ dev->reg_state = NETREG_UNREGISTERING;
+
+ synchronize_net();
+
+ /* Shutdown queueing discipline. */
+ dev_shutdown(dev);
+
+
+ /* Notify protocols, that we are about to destroy
+ this device. They should clean all the things.
+ */
+ call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+
+ /*
+ * Flush the unicast and multicast chains
+ */
+ dev_addr_discard(dev);
+
+ if (dev->uninit)
+ dev->uninit(dev);
+
+ /* Notifier chain MUST detach us from master device. */
+ BUG_TRAP(!dev->master);
+
+ /* Remove entries from kobject tree */
+ netdev_unregister_kobject(dev);
+
+ synchronize_net();
+
+ dev_put(dev);
+}
+
/**
* register_netdevice - register a network device
* @dev: device to register
@@ -3625,8 +3699,10 @@
/* Notify protocols, that a new device appeared. */
ret = call_netdevice_notifiers(NETDEV_REGISTER, dev);
ret = notifier_to_errno(ret);
- if (ret)
- unregister_netdevice(dev);
+ if (ret) {
+ rollback_registered(dev);
+ dev->reg_state = NETREG_UNREGISTERED;
+ }
out:
return ret;
@@ -3903,59 +3979,9 @@
void unregister_netdevice(struct net_device *dev)
{
- BUG_ON(dev_boot_phase);
- ASSERT_RTNL();
-
- /* Some devices call without registering for initialization unwind. */
- if (dev->reg_state == NETREG_UNINITIALIZED) {
- printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
- "was registered\n", dev->name, dev);
-
- WARN_ON(1);
- return;
- }
-
- BUG_ON(dev->reg_state != NETREG_REGISTERED);
-
- /* If device is running, close it first. */
- dev_close(dev);
-
- /* And unlink it from device chain. */
- unlist_netdevice(dev);
-
- dev->reg_state = NETREG_UNREGISTERING;
-
- synchronize_net();
-
- /* Shutdown queueing discipline. */
- dev_shutdown(dev);
-
-
- /* Notify protocols, that we are about to destroy
- this device. They should clean all the things.
- */
- call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
-
- /*
- * Flush the unicast and multicast chains
- */
- dev_addr_discard(dev);
-
- if (dev->uninit)
- dev->uninit(dev);
-
- /* Notifier chain MUST detach us from master device. */
- BUG_TRAP(!dev->master);
-
- /* Remove entries from kobject tree */
- netdev_unregister_kobject(dev);
-
+ rollback_registered(dev);
/* Finish processing unregister after unlock */
net_set_todo(dev);
-
- synchronize_net();
-
- dev_put(dev);
}
/**
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 6f71db8..e9f0964 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -17,16 +17,89 @@
LIST_HEAD(net_namespace_list);
-static struct kmem_cache *net_cachep;
-
struct net init_net;
EXPORT_SYMBOL_GPL(init_net);
+/*
+ * setup_net runs the initializers for the network namespace object.
+ */
+static __net_init int setup_net(struct net *net)
+{
+ /* Must be called with net_mutex held */
+ struct pernet_operations *ops;
+ int error;
+
+ atomic_set(&net->count, 1);
+ atomic_set(&net->use_count, 0);
+
+ error = 0;
+ list_for_each_entry(ops, &pernet_list, list) {
+ if (ops->init) {
+ error = ops->init(net);
+ if (error < 0)
+ goto out_undo;
+ }
+ }
+out:
+ return error;
+
+out_undo:
+ /* Walk through the list backwards calling the exit functions
+ * for the pernet modules whose init functions did not fail.
+ */
+ list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
+ if (ops->exit)
+ ops->exit(net);
+ }
+
+ rcu_barrier();
+ goto out;
+}
+
+#ifdef CONFIG_NET_NS
+static struct kmem_cache *net_cachep;
+
static struct net *net_alloc(void)
{
return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
}
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+{
+ struct net *new_net = NULL;
+ int err;
+
+ get_net(old_net);
+
+ if (!(flags & CLONE_NEWNET))
+ return old_net;
+
+ err = -ENOMEM;
+ new_net = net_alloc();
+ if (!new_net)
+ goto out;
+
+ mutex_lock(&net_mutex);
+ err = setup_net(new_net);
+ if (err)
+ goto out_unlock;
+
+ rtnl_lock();
+ list_add_tail(&new_net->list, &net_namespace_list);
+ rtnl_unlock();
+
+
+out_unlock:
+ mutex_unlock(&net_mutex);
+out:
+ put_net(old_net);
+ if (err) {
+ net_free(new_net);
+ new_net = ERR_PTR(err);
+ }
+ return new_net;
+}
+
static void net_free(struct net *net)
{
if (!net)
@@ -72,7 +145,6 @@
net_free(net);
}
-
void __put_net(struct net *net)
{
/* Cleanup the network namespace in process context */
@@ -81,88 +153,25 @@
}
EXPORT_SYMBOL_GPL(__put_net);
-/*
- * setup_net runs the initializers for the network namespace object.
- */
-static int setup_net(struct net *net)
-{
- /* Must be called with net_mutex held */
- struct pernet_operations *ops;
- int error;
-
- atomic_set(&net->count, 1);
- atomic_set(&net->use_count, 0);
-
- error = 0;
- list_for_each_entry(ops, &pernet_list, list) {
- if (ops->init) {
- error = ops->init(net);
- if (error < 0)
- goto out_undo;
- }
- }
-out:
- return error;
-
-out_undo:
- /* Walk through the list backwards calling the exit functions
- * for the pernet modules whose init functions did not fail.
- */
- list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
- if (ops->exit)
- ops->exit(net);
- }
- goto out;
-}
-
+#else
struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
- struct net *new_net = NULL;
- int err;
-
- get_net(old_net);
-
- if (!(flags & CLONE_NEWNET))
- return old_net;
-
-#ifndef CONFIG_NET_NS
- return ERR_PTR(-EINVAL);
-#endif
-
- err = -ENOMEM;
- new_net = net_alloc();
- if (!new_net)
- goto out;
-
- mutex_lock(&net_mutex);
- err = setup_net(new_net);
- if (err)
- goto out_unlock;
-
- rtnl_lock();
- list_add_tail(&new_net->list, &net_namespace_list);
- rtnl_unlock();
-
-
-out_unlock:
- mutex_unlock(&net_mutex);
-out:
- put_net(old_net);
- if (err) {
- net_free(new_net);
- new_net = ERR_PTR(err);
- }
- return new_net;
+ if (flags & CLONE_NEWNET)
+ return ERR_PTR(-EINVAL);
+ return old_net;
}
+#endif
static int __init net_ns_init(void)
{
int err;
printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
+#ifdef CONFIG_NET_NS
net_cachep = kmem_cache_create("net_namespace", sizeof(struct net),
SMP_CACHE_BYTES,
SLAB_PANIC, NULL);
+#endif
mutex_lock(&net_mutex);
err = setup_net(&init_net);
@@ -185,29 +194,28 @@
struct net *net, *undo_net;
int error;
- error = 0;
list_add_tail(&ops->list, list);
- for_each_net(net) {
- if (ops->init) {
+ if (ops->init) {
+ for_each_net(net) {
error = ops->init(net);
if (error)
goto out_undo;
}
}
-out:
- return error;
+ return 0;
out_undo:
/* If I have an error cleanup all namespaces I initialized */
list_del(&ops->list);
- for_each_net(undo_net) {
- if (undo_net == net)
- goto undone;
- if (ops->exit)
+ if (ops->exit) {
+ for_each_net(undo_net) {
+ if (undo_net == net)
+ goto undone;
ops->exit(undo_net);
+ }
}
undone:
- goto out;
+ return error;
}
static void unregister_pernet_operations(struct pernet_operations *ops)
@@ -215,8 +223,8 @@
struct net *net;
list_del(&ops->list);
- for_each_net(net)
- if (ops->exit)
+ if (ops->exit)
+ for_each_net(net)
ops->exit(net);
}
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index bf8d18f..c499b5c 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -116,6 +116,29 @@
* network adapter, forcing superfluous retries and possibly timeouts.
* Thus, we set our budget to greater than 1.
*/
+static int poll_one_napi(struct netpoll_info *npinfo,
+ struct napi_struct *napi, int budget)
+{
+ int work;
+
+ /* net_rx_action's ->poll() invocations and our's are
+ * synchronized by this test which is only made while
+ * holding the napi->poll_lock.
+ */
+ if (!test_bit(NAPI_STATE_SCHED, &napi->state))
+ return budget;
+
+ npinfo->rx_flags |= NETPOLL_RX_DROP;
+ atomic_inc(&trapped);
+
+ work = napi->poll(napi, budget);
+
+ atomic_dec(&trapped);
+ npinfo->rx_flags &= ~NETPOLL_RX_DROP;
+
+ return budget - work;
+}
+
static void poll_napi(struct netpoll *np)
{
struct netpoll_info *npinfo = np->dev->npinfo;
@@ -123,17 +146,13 @@
int budget = 16;
list_for_each_entry(napi, &np->dev->napi_list, dev_list) {
- if (test_bit(NAPI_STATE_SCHED, &napi->state) &&
- napi->poll_owner != smp_processor_id() &&
+ if (napi->poll_owner != smp_processor_id() &&
spin_trylock(&napi->poll_lock)) {
- npinfo->rx_flags |= NETPOLL_RX_DROP;
- atomic_inc(&trapped);
-
- napi->poll(napi, budget);
-
- atomic_dec(&trapped);
- npinfo->rx_flags &= ~NETPOLL_RX_DROP;
+ budget = poll_one_napi(npinfo, napi, budget);
spin_unlock(&napi->poll_lock);
+
+ if (!budget)
+ break;
}
}
}
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 573e172..64b50ff 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2028,8 +2028,8 @@
* Fill the specified scatter-gather list with mappings/pointers into a
* region of the buffer space attached to a socket buffer.
*/
-int
-skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+static int
+__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
{
int start = skb_headlen(skb);
int i, copy = start - offset;
@@ -2078,7 +2078,8 @@
if ((copy = end - offset) > 0) {
if (copy > len)
copy = len;
- elt += skb_to_sgvec(list, sg+elt, offset - start, copy);
+ elt += __skb_to_sgvec(list, sg+elt, offset - start,
+ copy);
if ((len -= copy) == 0)
return elt;
offset += copy;
@@ -2090,6 +2091,15 @@
return elt;
}
+int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+{
+ int nsg = __skb_to_sgvec(skb, sg, offset, len);
+
+ __sg_mark_end(&sg[nsg - 1]);
+
+ return nsg;
+}
+
/**
* skb_cow_data - Check that a socket buffer's data buffers are writable
* @skb: The socket buffer to check.
diff --git a/net/core/sock.c b/net/core/sock.c
index bba9949..12ad206 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -857,6 +857,67 @@
af_family_keys + sk->sk_family);
}
+static void sock_copy(struct sock *nsk, const struct sock *osk)
+{
+#ifdef CONFIG_SECURITY_NETWORK
+ void *sptr = nsk->sk_security;
+#endif
+
+ memcpy(nsk, osk, osk->sk_prot->obj_size);
+#ifdef CONFIG_SECURITY_NETWORK
+ nsk->sk_security = sptr;
+ security_sk_clone(osk, nsk);
+#endif
+}
+
+static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
+ int family)
+{
+ struct sock *sk;
+ struct kmem_cache *slab;
+
+ slab = prot->slab;
+ if (slab != NULL)
+ sk = kmem_cache_alloc(slab, priority);
+ else
+ sk = kmalloc(prot->obj_size, priority);
+
+ if (sk != NULL) {
+ if (security_sk_alloc(sk, family, priority))
+ goto out_free;
+
+ if (!try_module_get(prot->owner))
+ goto out_free_sec;
+ }
+
+ return sk;
+
+out_free_sec:
+ security_sk_free(sk);
+out_free:
+ if (slab != NULL)
+ kmem_cache_free(slab, sk);
+ else
+ kfree(sk);
+ return NULL;
+}
+
+static void sk_prot_free(struct proto *prot, struct sock *sk)
+{
+ struct kmem_cache *slab;
+ struct module *owner;
+
+ owner = prot->owner;
+ slab = prot->slab;
+
+ security_sk_free(sk);
+ if (slab != NULL)
+ kmem_cache_free(slab, sk);
+ else
+ kfree(sk);
+ module_put(owner);
+}
+
/**
* sk_alloc - All socket objects are allocated here
* @net: the applicable net namespace
@@ -866,49 +927,28 @@
* @zero_it: if we should zero the newly allocated sock
*/
struct sock *sk_alloc(struct net *net, int family, gfp_t priority,
- struct proto *prot, int zero_it)
+ struct proto *prot)
{
- struct sock *sk = NULL;
- struct kmem_cache *slab = prot->slab;
+ struct sock *sk;
- if (slab != NULL)
- sk = kmem_cache_alloc(slab, priority);
- else
- sk = kmalloc(prot->obj_size, priority);
-
+ sk = sk_prot_alloc(prot, priority | __GFP_ZERO, family);
if (sk) {
- if (zero_it) {
- memset(sk, 0, prot->obj_size);
- sk->sk_family = family;
- /*
- * See comment in struct sock definition to understand
- * why we need sk_prot_creator -acme
- */
- sk->sk_prot = sk->sk_prot_creator = prot;
- sock_lock_init(sk);
- sk->sk_net = get_net(net);
- }
-
- if (security_sk_alloc(sk, family, priority))
- goto out_free;
-
- if (!try_module_get(prot->owner))
- goto out_free;
+ sk->sk_family = family;
+ /*
+ * See comment in struct sock definition to understand
+ * why we need sk_prot_creator -acme
+ */
+ sk->sk_prot = sk->sk_prot_creator = prot;
+ sock_lock_init(sk);
+ sk->sk_net = get_net(net);
}
- return sk;
-out_free:
- if (slab != NULL)
- kmem_cache_free(slab, sk);
- else
- kfree(sk);
- return NULL;
+ return sk;
}
void sk_free(struct sock *sk)
{
struct sk_filter *filter;
- struct module *owner = sk->sk_prot_creator->owner;
if (sk->sk_destruct)
sk->sk_destruct(sk);
@@ -925,25 +965,22 @@
printk(KERN_DEBUG "%s: optmem leakage (%d bytes) detected.\n",
__FUNCTION__, atomic_read(&sk->sk_omem_alloc));
- security_sk_free(sk);
put_net(sk->sk_net);
- if (sk->sk_prot_creator->slab != NULL)
- kmem_cache_free(sk->sk_prot_creator->slab, sk);
- else
- kfree(sk);
- module_put(owner);
+ sk_prot_free(sk->sk_prot_creator, sk);
}
struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
{
- struct sock *newsk = sk_alloc(sk->sk_net, sk->sk_family, priority, sk->sk_prot, 0);
+ struct sock *newsk;
+ newsk = sk_prot_alloc(sk->sk_prot, priority, sk->sk_family);
if (newsk != NULL) {
struct sk_filter *filter;
sock_copy(newsk, sk);
/* SANITY */
+ get_net(newsk->sk_net);
sk_node_init(&newsk->sk_node);
sock_lock_init(newsk);
bh_lock_sock(newsk);
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index aabe98d..57d5749 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -474,7 +474,7 @@
static struct sock *dn_alloc_sock(struct net *net, struct socket *sock, gfp_t gfp)
{
struct dn_scp *scp;
- struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto, 1);
+ struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto);
if (!sk)
goto out;
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 9cae16b..f70df07 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -624,7 +624,7 @@
sock->state = SS_UNCONNECTED;
err = -ENOBUFS;
- sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto, 1);
+ sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto);
if (sk == NULL)
goto out;
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 621b128..d2f22e7 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -323,7 +323,7 @@
BUG_TRAP(answer_prot->slab != NULL);
err = -ENOBUFS;
- sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot, 1);
+ sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot);
if (sk == NULL)
goto out;
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index cad4278..c31bccb 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -111,9 +111,10 @@
goto unlock;
}
sg_init_table(sg, nfrags);
- sg_mark_end(sg, skb_to_sgvec(skb, sg, esph->enc_data +
- esp->conf.ivlen -
- skb->data, clen));
+ skb_to_sgvec(skb, sg,
+ esph->enc_data +
+ esp->conf.ivlen -
+ skb->data, clen);
err = crypto_blkcipher_encrypt(&desc, sg, sg, clen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
@@ -205,8 +206,9 @@
goto out;
}
sg_init_table(sg, nfrags);
- sg_mark_end(sg, skb_to_sgvec(skb, sg, sizeof(*esph) + esp->conf.ivlen,
- elen));
+ skb_to_sgvec(skb, sg,
+ sizeof(*esph) + esp->conf.ivlen,
+ elen);
err = crypto_blkcipher_decrypt(&desc, sg, sg, elen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c
index 6a1fec4..427b593 100644
--- a/net/ipv4/ipvs/ip_vs_lblcr.c
+++ b/net/ipv4/ipvs/ip_vs_lblcr.c
@@ -48,8 +48,6 @@
/* for sysctl */
#include <linux/fs.h>
#include <linux/sysctl.h>
-/* for proc_net_create/proc_net_remove */
-#include <linux/proc_fs.h>
#include <net/net_namespace.h>
#include <net/ip_vs.h>
@@ -547,71 +545,6 @@
mod_timer(&tbl->periodic_timer, jiffies+CHECK_EXPIRE_INTERVAL);
}
-
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
-static struct ip_vs_lblcr_table *lblcr_table_list;
-
-/*
- * /proc/net/ip_vs_lblcr to display the mappings of
- * destination IP address <==> its serverSet
- */
-static int
-ip_vs_lblcr_getinfo(char *buffer, char **start, off_t offset, int length)
-{
- off_t pos=0, begin;
- int len=0, size;
- struct ip_vs_lblcr_table *tbl;
- unsigned long now = jiffies;
- int i;
- struct ip_vs_lblcr_entry *en;
-
- tbl = lblcr_table_list;
-
- size = sprintf(buffer, "LastTime Dest IP address Server set\n");
- pos += size;
- len += size;
-
- for (i=0; i<IP_VS_LBLCR_TAB_SIZE; i++) {
- read_lock_bh(&tbl->lock);
- list_for_each_entry(en, &tbl->bucket[i], list) {
- char tbuf[16];
- struct ip_vs_dest_list *d;
-
- sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(en->addr));
- size = sprintf(buffer+len, "%8lu %-16s ",
- now-en->lastuse, tbuf);
-
- read_lock(&en->set.lock);
- for (d=en->set.list; d!=NULL; d=d->next) {
- size += sprintf(buffer+len+size,
- "%u.%u.%u.%u ",
- NIPQUAD(d->dest->addr));
- }
- read_unlock(&en->set.lock);
- size += sprintf(buffer+len+size, "\n");
- len += size;
- pos += size;
- if (pos <= offset)
- len=0;
- if (pos >= offset+length) {
- read_unlock_bh(&tbl->lock);
- goto done;
- }
- }
- read_unlock_bh(&tbl->lock);
- }
-
- done:
- begin = len - (pos - offset);
- *start = buffer + begin;
- len -= begin;
- if(len>length)
- len = length;
- return len;
-}
-#endif
-
-
static int ip_vs_lblcr_init_svc(struct ip_vs_service *svc)
{
int i;
@@ -650,9 +583,6 @@
tbl->periodic_timer.expires = jiffies+CHECK_EXPIRE_INTERVAL;
add_timer(&tbl->periodic_timer);
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- lblcr_table_list = tbl;
-#endif
return 0;
}
@@ -843,18 +773,12 @@
{
INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list);
sysctl_header = register_sysctl_table(lblcr_root_table);
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- proc_net_create(&init_net, "ip_vs_lblcr", 0, ip_vs_lblcr_getinfo);
-#endif
return register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
}
static void __exit ip_vs_lblcr_cleanup(void)
{
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- proc_net_remove(&init_net, "ip_vs_lblcr");
-#endif
unregister_sysctl_table(sysctl_header);
unregister_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
}
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index c99f2a3..0d4d972 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -72,7 +72,6 @@
int state;
};
-#define IP_VS_SYNC_CONN_TIMEOUT (3*60*HZ)
#define SIMPLE_CONN_SIZE (sizeof(struct ip_vs_sync_conn))
#define FULL_CONN_SIZE \
(sizeof(struct ip_vs_sync_conn) + sizeof(struct ip_vs_sync_conn_options))
@@ -284,6 +283,7 @@
struct ip_vs_sync_conn *s;
struct ip_vs_sync_conn_options *opt;
struct ip_vs_conn *cp;
+ struct ip_vs_protocol *pp;
char *p;
int i;
@@ -342,7 +342,8 @@
p += SIMPLE_CONN_SIZE;
atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]);
- cp->timeout = IP_VS_SYNC_CONN_TIMEOUT;
+ pp = ip_vs_proto_get(s->protocol);
+ cp->timeout = pp->timeout_table[cp->state];
ip_vs_conn_put(cp);
if (p > buffer+buflen) {
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index fa97947..9aca9c5 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -128,7 +128,7 @@
eg. UNICAST, LOCAL, BROADCAST, ...
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
# `filter', generic and specific targets
config IP_NF_FILTER
@@ -371,7 +371,7 @@
and OUTPUT chains.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
# ARP tables
config IP_NF_ARPTABLES
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 9be0daa..ffdccc0 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -304,7 +304,7 @@
for (i=0; icmpmibmap[i].name != NULL; i++)
seq_printf(seq, " %lu",
snmp_fold_field((void **) icmpmsg_statistics,
- icmpmibmap[i].index));
+ icmpmibmap[i].index | 0x100));
}
/*
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 2e6ad6d..c64072b 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2453,7 +2453,7 @@
0,
&tcp_hashinfo.ehash_size,
NULL,
- 0);
+ thash_entries ? 0 : 512 * 1024);
tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
rwlock_init(&tcp_hashinfo.ehash[i].lock);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 69d8c38..ca9590f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1330,12 +1330,15 @@
cached_fack_count = 0;
}
- for (i=0; i<num_sacks; i++, sp++) {
+ for (i = 0; i < num_sacks; i++) {
struct sk_buff *skb;
__u32 start_seq = ntohl(sp->start_seq);
__u32 end_seq = ntohl(sp->end_seq);
int fack_count;
int dup_sack = (found_dup_sack && (i == first_sack_index));
+ int next_dup = (found_dup_sack && (i+1 == first_sack_index));
+
+ sp++;
if (!tcp_is_sackblock_valid(tp, dup_sack, start_seq, end_seq)) {
if (dup_sack) {
@@ -1361,7 +1364,7 @@
flag |= FLAG_DATA_LOST;
tcp_for_write_queue_from(skb, sk) {
- int in_sack;
+ int in_sack = 0;
u8 sacked;
if (skb == tcp_send_head(sk))
@@ -1380,7 +1383,23 @@
if (!before(TCP_SKB_CB(skb)->seq, end_seq))
break;
- in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq);
+ dup_sack = (found_dup_sack && (i == first_sack_index));
+
+ /* Due to sorting DSACK may reside within this SACK block! */
+ if (next_dup) {
+ u32 dup_start = ntohl(sp->start_seq);
+ u32 dup_end = ntohl(sp->end_seq);
+
+ if (before(TCP_SKB_CB(skb)->seq, dup_end)) {
+ in_sack = tcp_match_skb_to_sack(sk, skb, dup_start, dup_end);
+ if (in_sack > 0)
+ dup_sack = 1;
+ }
+ }
+
+ /* DSACK info lost if out-of-mem, try SACK still */
+ if (in_sack <= 0)
+ in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq);
if (in_sack < 0)
break;
@@ -2059,7 +2078,7 @@
if (!tcp_skb_timedout(sk, skb))
break;
- if (!(TCP_SKB_CB(skb)->sacked&TCPCB_TAGBITS)) {
+ if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) {
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
tcp_verify_retransmit_hint(tp, skb);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index ad759f1..eec02b2 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -858,16 +858,16 @@
u8 *newkey, u8 newkeylen)
{
/* Add Key to the list */
- struct tcp4_md5sig_key *key;
+ struct tcp_md5sig_key *key;
struct tcp_sock *tp = tcp_sk(sk);
struct tcp4_md5sig_key *keys;
- key = (struct tcp4_md5sig_key *)tcp_v4_md5_do_lookup(sk, addr);
+ key = tcp_v4_md5_do_lookup(sk, addr);
if (key) {
/* Pre-existing entry - just update that one. */
- kfree(key->base.key);
- key->base.key = newkey;
- key->base.keylen = newkeylen;
+ kfree(key->key);
+ key->key = newkey;
+ key->keylen = newkeylen;
} else {
struct tcp_md5sig_info *md5sig;
@@ -1083,7 +1083,7 @@
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
- sg_mark_end(sg, block);
+ __sg_mark_end(&sg[block - 1]);
/* Now store the Hash into the packet */
err = crypto_hash_init(desc);
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index b49dedc..007304e 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -266,26 +266,25 @@
*/
diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
- if (tp->snd_cwnd <= tp->snd_ssthresh) {
+ if (diff > gamma && tp->snd_ssthresh > 2 ) {
+ /* Going too fast. Time to slow down
+ * and switch to congestion avoidance.
+ */
+ tp->snd_ssthresh = 2;
+
+ /* Set cwnd to match the actual rate
+ * exactly:
+ * cwnd = (actual rate) * baseRTT
+ * Then we add 1 because the integer
+ * truncation robs us of full link
+ * utilization.
+ */
+ tp->snd_cwnd = min(tp->snd_cwnd,
+ (target_cwnd >>
+ V_PARAM_SHIFT)+1);
+
+ } else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
- if (diff > gamma) {
- /* Going too fast. Time to slow down
- * and switch to congestion avoidance.
- */
- tp->snd_ssthresh = 2;
-
- /* Set cwnd to match the actual rate
- * exactly:
- * cwnd = (actual rate) * baseRTT
- * Then we add 1 because the integer
- * truncation robs us of full link
- * utilization.
- */
- tp->snd_cwnd = min(tp->snd_cwnd,
- (target_cwnd >>
- V_PARAM_SHIFT)+1);
-
- }
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 348bd8d..1bd8d81 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4288,8 +4288,4 @@
del_timer(&addr_chk_timer);
rtnl_unlock();
-
-#ifdef CONFIG_PROC_FS
- proc_net_remove(&init_net, "if_inet6");
-#endif
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 1b1caf3..ecbd388 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -162,7 +162,7 @@
BUG_TRAP(answer_prot->slab != NULL);
err = -ENOBUFS;
- sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot, 1);
+ sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot);
if (sk == NULL)
goto out;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index ab17b5e..7db66f1 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -110,9 +110,10 @@
goto unlock;
}
sg_init_table(sg, nfrags);
- sg_mark_end(sg, skb_to_sgvec(skb, sg, esph->enc_data +
- esp->conf.ivlen -
- skb->data, clen));
+ skb_to_sgvec(skb, sg,
+ esph->enc_data +
+ esp->conf.ivlen -
+ skb->data, clen);
err = crypto_blkcipher_encrypt(&desc, sg, sg, clen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
@@ -209,9 +210,9 @@
}
}
sg_init_table(sg, nfrags);
- sg_mark_end(sg, skb_to_sgvec(skb, sg,
- sizeof(*esph) + esp->conf.ivlen,
- elen));
+ skb_to_sgvec(skb, sg,
+ sizeof(*esph) + esp->conf.ivlen,
+ elen);
ret = crypto_blkcipher_decrypt(&desc, sg, sg, elen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 20cfc90..36f7dbf 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1670,7 +1670,7 @@
filp, buffer, lenp, ppos);
else if ((strcmp(ctl->procname, "retrans_time_ms") == 0) ||
- (strcmp(ctl->procname, "base_reacable_time_ms") == 0))
+ (strcmp(ctl->procname, "base_reachable_time_ms") == 0))
ret = proc_dointvec_ms_jiffies(ctl, write,
filp, buffer, lenp, ppos);
else
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 8520802..4b90328 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -561,16 +561,16 @@
char *newkey, u8 newkeylen)
{
/* Add key to the list */
- struct tcp6_md5sig_key *key;
+ struct tcp_md5sig_key *key;
struct tcp_sock *tp = tcp_sk(sk);
struct tcp6_md5sig_key *keys;
- key = (struct tcp6_md5sig_key*) tcp_v6_md5_do_lookup(sk, peer);
+ key = tcp_v6_md5_do_lookup(sk, peer);
if (key) {
/* modify existing entry - just update that one */
- kfree(key->base.key);
- key->base.key = newkey;
- key->base.keylen = newkeylen;
+ kfree(key->key);
+ key->key = newkey;
+ key->keylen = newkeylen;
} else {
/* reallocate new list if current one is full. */
if (!tp->md5sig_info) {
@@ -781,7 +781,7 @@
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
- sg_mark_end(sg, block);
+ __sg_mark_end(&sg[block - 1]);
/* Now store the hash into the packet */
err = crypto_hash_init(desc);
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 29b063d..a195a66 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1381,7 +1381,7 @@
goto out;
rc = -ENOMEM;
- sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto, 1);
+ sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto);
if (!sk)
goto out;
#ifdef IPX_REFCNT_DEBUG
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 0328ae2..48ce59a 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1078,7 +1078,7 @@
}
/* Allocate networking socket */
- sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto, 1);
+ sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto);
if (sk == NULL)
return -ENOMEM;
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 2f9f8dc..e0eab59 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -731,15 +731,25 @@
/* Get termios */
case TCGETS:
DEBUG(FS_INFO, "Get termios.\n");
+#ifndef TCGETS2
if(kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios))
break;
+#else
+ if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios))
+ break;
+#endif
err = 0;
break;
/* Set termios */
case TCSETSF:
DEBUG(FS_INFO, "Set termios.\n");
+#ifndef TCGETS2
if(user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp))
break;
+#else
+ if(user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp))
+ break;
+#endif
err = 0;
break;
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 43e01c8..aef6645 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -216,7 +216,7 @@
{
struct sock *sk;
- sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto, 1);
+ sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto);
if (!sk)
return NULL;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 7969f8a..10c89d4 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -152,7 +152,7 @@
return -EPROTONOSUPPORT;
err = -ENOMEM;
- sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto, 1);
+ sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto);
if (sk == NULL)
goto out;
@@ -395,9 +395,9 @@
static inline int verify_sec_ctx_len(void *p)
{
struct sadb_x_sec_ctx *sec_ctx = (struct sadb_x_sec_ctx *)p;
- int len;
+ int len = sec_ctx->sadb_x_ctx_len;
- if (sec_ctx->sadb_x_ctx_len > PAGE_SIZE)
+ if (len > PAGE_SIZE)
return -EINVAL;
len = pfkey_sec_ctx_len(sec_ctx);
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index 8ebc276..5c0b484 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -869,7 +869,7 @@
*/
struct sock *llc_sk_alloc(struct net *net, int family, gfp_t priority, struct proto *prot)
{
- struct sock *sk = sk_alloc(net, family, priority, prot, 1);
+ struct sock *sk = sk_alloc(net, family, priority, prot);
if (!sk)
goto out;
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index d7a600a..21a9fcc 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -363,7 +363,7 @@
the tables, chains, rules.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 4d6171b..000c2fb 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -999,7 +999,7 @@
*vmalloced = 0;
size = *sizep = roundup(*sizep, PAGE_SIZE / sizeof(struct hlist_head));
- hash = (void*)__get_free_pages(GFP_KERNEL,
+ hash = (void*)__get_free_pages(GFP_KERNEL|__GFP_NOWARN,
get_order(sizeof(struct hlist_head)
* size));
if (!hash) {
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 4f994c0..2601712 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -396,7 +396,7 @@
sock->ops = &netlink_ops;
- sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto, 1);
+ sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 3a4d479..972250c9 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -423,7 +423,8 @@
if (sock->type != SOCK_SEQPACKET || protocol != 0)
return -ESOCKTNOSUPPORT;
- if ((sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto);
+ if (sk == NULL)
return -ENOMEM;
nr = nr_sk(sk);
@@ -465,7 +466,8 @@
if (osk->sk_type != SOCK_SEQPACKET)
return NULL;
- if ((sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot);
+ if (sk == NULL)
return NULL;
nr = nr_sk(sk);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d093650..4cb2dfb 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -995,7 +995,7 @@
sock->state = SS_UNCONNECTED;
err = -ENOBUFS;
- sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto, 1);
+ sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto);
if (sk == NULL)
goto out;
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 509defe..ed2d65c 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -513,7 +513,8 @@
if (sock->type != SOCK_SEQPACKET || protocol != 0)
return -ESOCKTNOSUPPORT;
- if ((sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto);
+ if (sk == NULL)
return -ENOMEM;
rose = rose_sk(sk);
@@ -551,7 +552,8 @@
if (osk->sk_type != SOCK_SEQPACKET)
return NULL;
- if ((sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto);
+ if (sk == NULL)
return NULL;
rose = rose_sk(sk);
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index c680017..d638945 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -627,7 +627,7 @@
sock->ops = &rxrpc_rpc_ops;
sock->state = SS_UNCONNECTED;
- sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto, 1);
+ sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index eebefb6..c387cf6 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -237,7 +237,8 @@
len = data_size + call->conn->size_align - 1;
len &= ~(call->conn->size_align - 1);
- sg_init_table(sg, skb_to_sgvec(skb, sg, 0, len));
+ sg_init_table(sg, nsg);
+ skb_to_sgvec(skb, sg, 0, len);
crypto_blkcipher_encrypt_iv(&desc, sg, sg, len);
_leave(" = 0");
@@ -344,7 +345,7 @@
goto nomem;
sg_init_table(sg, nsg);
- sg_mark_end(sg, skb_to_sgvec(skb, sg, 0, 8));
+ skb_to_sgvec(skb, sg, 0, 8);
/* start the decryption afresh */
memset(&iv, 0, sizeof(iv));
@@ -426,7 +427,7 @@
}
sg_init_table(sg, nsg);
- sg_mark_end(sg, skb_to_sgvec(skb, sg, 0, skb->len));
+ skb_to_sgvec(skb, sg, 0, skb->len);
/* decrypt from the session key */
payload = call->conn->key->payload.data;
@@ -701,7 +702,7 @@
nsg++;
}
- sg_mark_end(sg, nsg);
+ __sg_mark_end(&sg[nsg - 1]);
ASSERTCMP(sg[0].length + sg[1].length, ==, buflen);
}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index eb4deaf..7f31ff6 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -631,7 +631,7 @@
struct ipv6_pinfo *newnp, *np = inet6_sk(sk);
struct sctp6_sock *newsctp6sk;
- newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot, 1);
+ newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot);
if (!newsk)
goto out;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index f5cd96f..40c1a47 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -552,7 +552,8 @@
{
struct inet_sock *inet = inet_sk(sk);
struct inet_sock *newinet;
- struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL, sk->sk_prot, 1);
+ struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL,
+ sk->sk_prot);
if (!newsk)
goto out;
diff --git a/net/socket.c b/net/socket.c
index 540013e..5d879fd 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1250,11 +1250,14 @@
goto out_release_both;
fd1 = sock_alloc_fd(&newfile1);
- if (unlikely(fd1 < 0))
+ if (unlikely(fd1 < 0)) {
+ err = fd1;
goto out_release_both;
+ }
fd2 = sock_alloc_fd(&newfile2);
if (unlikely(fd2 < 0)) {
+ err = fd2;
put_filp(newfile1);
put_unused_fd(fd1);
goto out_release_both;
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index 91cd8f0..ab7cbd6 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -211,8 +211,8 @@
if (thislen == 0)
return 0;
- sg_mark_end(desc->infrags, desc->fragno);
- sg_mark_end(desc->outfrags, desc->fragno);
+ __sg_mark_end(&desc->infrags[desc->fragno - 1]);
+ __sg_mark_end(&desc->outfrags[desc->fragno - 1]);
ret = crypto_blkcipher_encrypt_iv(&desc->desc, desc->outfrags,
desc->infrags, thislen);
@@ -293,7 +293,7 @@
if (thislen == 0)
return 0;
- sg_mark_end(desc->frags, desc->fragno);
+ __sg_mark_end(&desc->frags[desc->fragno - 1]);
ret = crypto_blkcipher_decrypt_iv(&desc->desc, desc->frags,
desc->frags, thislen);
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 864b541b..2be714e 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -87,9 +87,8 @@
left--, s++;
*(unsigned int *) table->data = value;
/* Display the RPC tasks on writing to rpc_debug */
- if (table->ctl_name == CTL_RPCDEBUG) {
+ if (strcmp(table->procname, "rpc_debug") == 0)
rpc_show_tasks();
- }
} else {
if (!access_ok(VERIFY_WRITE, buffer, left))
return -EFAULT;
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index f877b88..9e11ce7 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -221,8 +221,8 @@
seg->mr_base);
dprintk("RPC: %s: read chunk "
"elem %d@0x%llx:0x%x pos %d (%s)\n", __func__,
- seg->mr_len, seg->mr_base, seg->mr_rkey, pos,
- n < nsegs ? "more" : "last");
+ seg->mr_len, (unsigned long long)seg->mr_base,
+ seg->mr_rkey, pos, n < nsegs ? "more" : "last");
cur_rchunk++;
r_xprt->rx_stats.read_chunk_count++;
} else { /* write/reply */
@@ -234,8 +234,8 @@
dprintk("RPC: %s: %s chunk "
"elem %d@0x%llx:0x%x (%s)\n", __func__,
(type == rpcrdma_replych) ? "reply" : "write",
- seg->mr_len, seg->mr_base, seg->mr_rkey,
- n < nsegs ? "more" : "last");
+ seg->mr_len, (unsigned long long)seg->mr_base,
+ seg->mr_rkey, n < nsegs ? "more" : "last");
cur_wchunk++;
if (type == rpcrdma_replych)
r_xprt->rx_stats.reply_chunk_count++;
@@ -577,7 +577,7 @@
dprintk("RPC: %s: chunk %d@0x%llx:0x%x\n",
__func__,
ntohl(seg->rs_length),
- off,
+ (unsigned long long)off,
ntohl(seg->rs_handle));
}
total_len += ntohl(seg->rs_length);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e36b4b5..6b79226 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -201,7 +201,7 @@
return -EPROTOTYPE;
}
- sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto, 1);
+ sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto);
if (!sk) {
tipc_deleteport(ref);
return -ENOMEM;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 9163ec5..515e7a6 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -602,7 +602,7 @@
if (atomic_read(&unix_nr_socks) >= 2*get_max_files())
goto out;
- sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto, 1);
+ sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto);
if (!sk)
goto out;
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index fc416f9..92cfe8e 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -472,7 +472,7 @@
static struct sock *x25_alloc_socket(struct net *net)
{
struct x25_sock *x25;
- struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto, 1);
+ struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto);
if (!sk)
goto out;