| #ifndef _ASM_POWERPC_IO_H |
| #define _ASM_POWERPC_IO_H |
| #ifdef __KERNEL__ |
| |
| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #ifndef CONFIG_PPC64 |
| #include <asm-ppc/io.h> |
| #else |
| |
| #include <linux/compiler.h> |
| #include <asm/page.h> |
| #include <asm/byteorder.h> |
| #ifdef CONFIG_PPC_ISERIES |
| #include <asm/iseries/iseries_io.h> |
| #endif |
| #include <asm/synch.h> |
| #include <asm/delay.h> |
| |
| #include <asm-generic/iomap.h> |
| |
| #define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c)) |
| #define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c)) |
| #define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c)) |
| #define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c)) |
| |
| |
| #define SIO_CONFIG_RA 0x398 |
| #define SIO_CONFIG_RD 0x399 |
| |
| #define SLOW_DOWN_IO |
| |
| extern unsigned long isa_io_base; |
| extern unsigned long pci_io_base; |
| extern unsigned long io_page_mask; |
| |
| #define MAX_ISA_PORT 0x10000 |
| |
| #define _IO_IS_VALID(port) ((port) >= MAX_ISA_PORT || (1 << (port>>PAGE_SHIFT)) \ |
| & io_page_mask) |
| |
| #ifdef CONFIG_PPC_ISERIES |
| /* __raw_* accessors aren't supported on iSeries */ |
| #define __raw_readb(addr) { BUG(); 0; } |
| #define __raw_readw(addr) { BUG(); 0; } |
| #define __raw_readl(addr) { BUG(); 0; } |
| #define __raw_readq(addr) { BUG(); 0; } |
| #define __raw_writeb(v, addr) { BUG(); 0; } |
| #define __raw_writew(v, addr) { BUG(); 0; } |
| #define __raw_writel(v, addr) { BUG(); 0; } |
| #define __raw_writeq(v, addr) { BUG(); 0; } |
| #define readb(addr) iSeries_Read_Byte(addr) |
| #define readw(addr) iSeries_Read_Word(addr) |
| #define readl(addr) iSeries_Read_Long(addr) |
| #define writeb(data, addr) iSeries_Write_Byte((data),(addr)) |
| #define writew(data, addr) iSeries_Write_Word((data),(addr)) |
| #define writel(data, addr) iSeries_Write_Long((data),(addr)) |
| #define memset_io(a,b,c) iSeries_memset_io((a),(b),(c)) |
| #define memcpy_fromio(a,b,c) iSeries_memcpy_fromio((a), (b), (c)) |
| #define memcpy_toio(a,b,c) iSeries_memcpy_toio((a), (b), (c)) |
| |
| #define inb(addr) readb(((void __iomem *)(long)(addr))) |
| #define inw(addr) readw(((void __iomem *)(long)(addr))) |
| #define inl(addr) readl(((void __iomem *)(long)(addr))) |
| #define outb(data,addr) writeb(data,((void __iomem *)(long)(addr))) |
| #define outw(data,addr) writew(data,((void __iomem *)(long)(addr))) |
| #define outl(data,addr) writel(data,((void __iomem *)(long)(addr))) |
| /* |
| * The *_ns versions below don't do byte-swapping. |
| * Neither do the standard versions now, these are just here |
| * for older code. |
| */ |
| #define insw_ns(port, buf, ns) _insw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns)) |
| #define insl_ns(port, buf, nl) _insl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl)) |
| #else |
| |
| static inline unsigned char __raw_readb(const volatile void __iomem *addr) |
| { |
| return *(volatile unsigned char __force *)addr; |
| } |
| static inline unsigned short __raw_readw(const volatile void __iomem *addr) |
| { |
| return *(volatile unsigned short __force *)addr; |
| } |
| static inline unsigned int __raw_readl(const volatile void __iomem *addr) |
| { |
| return *(volatile unsigned int __force *)addr; |
| } |
| static inline unsigned long __raw_readq(const volatile void __iomem *addr) |
| { |
| return *(volatile unsigned long __force *)addr; |
| } |
| static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) |
| { |
| *(volatile unsigned char __force *)addr = v; |
| } |
| static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) |
| { |
| *(volatile unsigned short __force *)addr = v; |
| } |
| static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) |
| { |
| *(volatile unsigned int __force *)addr = v; |
| } |
| static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) |
| { |
| *(volatile unsigned long __force *)addr = v; |
| } |
| #define readb(addr) eeh_readb(addr) |
| #define readw(addr) eeh_readw(addr) |
| #define readl(addr) eeh_readl(addr) |
| #define readq(addr) eeh_readq(addr) |
| #define writeb(data, addr) eeh_writeb((data), (addr)) |
| #define writew(data, addr) eeh_writew((data), (addr)) |
| #define writel(data, addr) eeh_writel((data), (addr)) |
| #define writeq(data, addr) eeh_writeq((data), (addr)) |
| #define memset_io(a,b,c) eeh_memset_io((a),(b),(c)) |
| #define memcpy_fromio(a,b,c) eeh_memcpy_fromio((a),(b),(c)) |
| #define memcpy_toio(a,b,c) eeh_memcpy_toio((a),(b),(c)) |
| #define inb(port) eeh_inb((unsigned long)port) |
| #define outb(val, port) eeh_outb(val, (unsigned long)port) |
| #define inw(port) eeh_inw((unsigned long)port) |
| #define outw(val, port) eeh_outw(val, (unsigned long)port) |
| #define inl(port) eeh_inl((unsigned long)port) |
| #define outl(val, port) eeh_outl(val, (unsigned long)port) |
| |
| /* |
| * The insw/outsw/insl/outsl macros don't do byte-swapping. |
| * They are only used in practice for transferring buffers which |
| * are arrays of bytes, and byte-swapping is not appropriate in |
| * that case. - paulus */ |
| #define insb(port, buf, ns) eeh_insb((port), (buf), (ns)) |
| #define insw(port, buf, ns) eeh_insw_ns((port), (buf), (ns)) |
| #define insl(port, buf, nl) eeh_insl_ns((port), (buf), (nl)) |
| #define insw_ns(port, buf, ns) eeh_insw_ns((port), (buf), (ns)) |
| #define insl_ns(port, buf, nl) eeh_insl_ns((port), (buf), (nl)) |
| |
| #define outsb(port, buf, ns) _outsb((u8 __iomem *)((port)+pci_io_base), (buf), (ns)) |
| #define outsw(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns)) |
| #define outsl(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl)) |
| |
| #endif |
| |
| #define readb_relaxed(addr) readb(addr) |
| #define readw_relaxed(addr) readw(addr) |
| #define readl_relaxed(addr) readl(addr) |
| #define readq_relaxed(addr) readq(addr) |
| |
| extern void _insb(volatile u8 __iomem *port, void *buf, int ns); |
| extern void _outsb(volatile u8 __iomem *port, const void *buf, int ns); |
| extern void _insw(volatile u16 __iomem *port, void *buf, int ns); |
| extern void _outsw(volatile u16 __iomem *port, const void *buf, int ns); |
| extern void _insl(volatile u32 __iomem *port, void *buf, int nl); |
| extern void _outsl(volatile u32 __iomem *port, const void *buf, int nl); |
| extern void _insw_ns(volatile u16 __iomem *port, void *buf, int ns); |
| extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns); |
| extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl); |
| extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl); |
| |
| #define mmiowb() |
| |
| /* |
| * output pause versions need a delay at least for the |
| * w83c105 ide controller in a p610. |
| */ |
| #define inb_p(port) inb(port) |
| #define outb_p(val, port) (udelay(1), outb((val), (port))) |
| #define inw_p(port) inw(port) |
| #define outw_p(val, port) (udelay(1), outw((val), (port))) |
| #define inl_p(port) inl(port) |
| #define outl_p(val, port) (udelay(1), outl((val), (port))) |
| |
| /* |
| * The *_ns versions below don't do byte-swapping. |
| * Neither do the standard versions now, these are just here |
| * for older code. |
| */ |
| #define outsw_ns(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns)) |
| #define outsl_ns(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl)) |
| |
| |
| #define IO_SPACE_LIMIT ~(0UL) |
| |
| |
| extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, |
| unsigned long size, unsigned long flags); |
| extern void __iomem *__ioremap(unsigned long address, unsigned long size, |
| unsigned long flags); |
| |
| /** |
| * ioremap - map bus memory into CPU space |
| * @address: bus address of the memory |
| * @size: size of the resource to map |
| * |
| * ioremap performs a platform specific sequence of operations to |
| * make bus memory CPU accessible via the readb/readw/readl/writeb/ |
| * writew/writel functions and the other mmio helpers. The returned |
| * address is not guaranteed to be usable directly as a virtual |
| * address. |
| */ |
| extern void __iomem *ioremap(unsigned long address, unsigned long size); |
| |
| #define ioremap_nocache(addr, size) ioremap((addr), (size)) |
| extern int iounmap_explicit(volatile void __iomem *addr, unsigned long size); |
| extern void iounmap(volatile void __iomem *addr); |
| extern void __iomem * reserve_phb_iospace(unsigned long size); |
| |
| /** |
| * virt_to_phys - map virtual addresses to physical |
| * @address: address to remap |
| * |
| * The returned physical address is the physical (CPU) mapping for |
| * the memory address given. It is only valid to use this function on |
| * addresses directly mapped or allocated via kmalloc. |
| * |
| * This function does not give bus mappings for DMA transfers. In |
| * almost all conceivable cases a device driver should not be using |
| * this function |
| */ |
| static inline unsigned long virt_to_phys(volatile void * address) |
| { |
| return __pa((unsigned long)address); |
| } |
| |
| /** |
| * phys_to_virt - map physical address to virtual |
| * @address: address to remap |
| * |
| * The returned virtual address is a current CPU mapping for |
| * the memory address given. It is only valid to use this function on |
| * addresses that have a kernel mapping |
| * |
| * This function does not handle bus mappings for DMA transfers. In |
| * almost all conceivable cases a device driver should not be using |
| * this function |
| */ |
| static inline void * phys_to_virt(unsigned long address) |
| { |
| return (void *)__va(address); |
| } |
| |
| /* |
| * Change "struct page" to physical address. |
| */ |
| #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) |
| |
| /* We do NOT want virtual merging, it would put too much pressure on |
| * our iommu allocator. Instead, we want drivers to be smart enough |
| * to coalesce sglists that happen to have been mapped in a contiguous |
| * way by the iommu |
| */ |
| #define BIO_VMERGE_BOUNDARY 0 |
| |
| static inline void iosync(void) |
| { |
| __asm__ __volatile__ ("sync" : : : "memory"); |
| } |
| |
| /* Enforce in-order execution of data I/O. |
| * No distinction between read/write on PPC; use eieio for all three. |
| */ |
| #define iobarrier_rw() eieio() |
| #define iobarrier_r() eieio() |
| #define iobarrier_w() eieio() |
| |
| /* |
| * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. |
| * These routines do not perform EEH-related I/O address translation, |
| * and should not be used directly by device drivers. Use inb/readb |
| * instead. |
| */ |
| static inline int in_8(const volatile unsigned char __iomem *addr) |
| { |
| int ret; |
| |
| __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "m" (*addr)); |
| return ret; |
| } |
| |
| static inline void out_8(volatile unsigned char __iomem *addr, int val) |
| { |
| __asm__ __volatile__("stb%U0%X0 %1,%0; sync" |
| : "=m" (*addr) : "r" (val)); |
| } |
| |
| static inline int in_le16(const volatile unsigned short __iomem *addr) |
| { |
| int ret; |
| |
| __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "r" (addr), "m" (*addr)); |
| return ret; |
| } |
| |
| static inline int in_be16(const volatile unsigned short __iomem *addr) |
| { |
| int ret; |
| |
| __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "m" (*addr)); |
| return ret; |
| } |
| |
| static inline void out_le16(volatile unsigned short __iomem *addr, int val) |
| { |
| __asm__ __volatile__("sthbrx %1,0,%2; sync" |
| : "=m" (*addr) : "r" (val), "r" (addr)); |
| } |
| |
| static inline void out_be16(volatile unsigned short __iomem *addr, int val) |
| { |
| __asm__ __volatile__("sth%U0%X0 %1,%0; sync" |
| : "=m" (*addr) : "r" (val)); |
| } |
| |
| static inline unsigned in_le32(const volatile unsigned __iomem *addr) |
| { |
| unsigned ret; |
| |
| __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "r" (addr), "m" (*addr)); |
| return ret; |
| } |
| |
| static inline unsigned in_be32(const volatile unsigned __iomem *addr) |
| { |
| unsigned ret; |
| |
| __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "m" (*addr)); |
| return ret; |
| } |
| |
| static inline void out_le32(volatile unsigned __iomem *addr, int val) |
| { |
| __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr) |
| : "r" (val), "r" (addr)); |
| } |
| |
| static inline void out_be32(volatile unsigned __iomem *addr, int val) |
| { |
| __asm__ __volatile__("stw%U0%X0 %1,%0; sync" |
| : "=m" (*addr) : "r" (val)); |
| } |
| |
| static inline unsigned long in_le64(const volatile unsigned long __iomem *addr) |
| { |
| unsigned long tmp, ret; |
| |
| __asm__ __volatile__( |
| "ld %1,0(%2)\n" |
| "twi 0,%1,0\n" |
| "isync\n" |
| "rldimi %0,%1,5*8,1*8\n" |
| "rldimi %0,%1,3*8,2*8\n" |
| "rldimi %0,%1,1*8,3*8\n" |
| "rldimi %0,%1,7*8,4*8\n" |
| "rldicl %1,%1,32,0\n" |
| "rlwimi %0,%1,8,8,31\n" |
| "rlwimi %0,%1,24,16,23\n" |
| : "=r" (ret) , "=r" (tmp) : "b" (addr) , "m" (*addr)); |
| return ret; |
| } |
| |
| static inline unsigned long in_be64(const volatile unsigned long __iomem *addr) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("ld%U1%X1 %0,%1; twi 0,%0,0; isync" |
| : "=r" (ret) : "m" (*addr)); |
| return ret; |
| } |
| |
| static inline void out_le64(volatile unsigned long __iomem *addr, unsigned long val) |
| { |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| "rldimi %0,%1,5*8,1*8\n" |
| "rldimi %0,%1,3*8,2*8\n" |
| "rldimi %0,%1,1*8,3*8\n" |
| "rldimi %0,%1,7*8,4*8\n" |
| "rldicl %1,%1,32,0\n" |
| "rlwimi %0,%1,8,8,31\n" |
| "rlwimi %0,%1,24,16,23\n" |
| "std %0,0(%3)\n" |
| "sync" |
| : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr)); |
| } |
| |
| static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long val) |
| { |
| __asm__ __volatile__("std%U0%X0 %1,%0; sync" : "=m" (*addr) : "r" (val)); |
| } |
| |
| #ifndef CONFIG_PPC_ISERIES |
| #include <asm/eeh.h> |
| #endif |
| |
| /** |
| * check_signature - find BIOS signatures |
| * @io_addr: mmio address to check |
| * @signature: signature block |
| * @length: length of signature |
| * |
| * Perform a signature comparison with the mmio address io_addr. This |
| * address should have been obtained by ioremap. |
| * Returns 1 on a match. |
| */ |
| static inline int check_signature(const volatile void __iomem * io_addr, |
| const unsigned char *signature, int length) |
| { |
| int retval = 0; |
| #ifndef CONFIG_PPC_ISERIES |
| do { |
| if (readb(io_addr) != *signature) |
| goto out; |
| io_addr++; |
| signature++; |
| length--; |
| } while (length); |
| retval = 1; |
| out: |
| #endif |
| return retval; |
| } |
| |
| /* Nothing to do */ |
| |
| #define dma_cache_inv(_start,_size) do { } while (0) |
| #define dma_cache_wback(_start,_size) do { } while (0) |
| #define dma_cache_wback_inv(_start,_size) do { } while (0) |
| |
| /* Check of existence of legacy devices */ |
| extern int check_legacy_ioport(unsigned long base_port); |
| |
| |
| /* |
| * Convert a physical pointer to a virtual kernel pointer for /dev/mem |
| * access |
| */ |
| #define xlate_dev_mem_ptr(p) __va(p) |
| |
| /* |
| * Convert a virtual cached pointer to an uncached pointer |
| */ |
| #define xlate_dev_kmem_ptr(p) p |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* CONFIG_PPC64 */ |
| #endif /* _ASM_POWERPC_IO_H */ |