IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
Add an InfiniBand driver for Mellanox ConnectX adapters. Because
these adapters can also be used as ethernet NICs and Fibre Channel
HBAs, the driver is split into two modules:
mlx4_core: Handles low-level things like device initialization and
processing firmware commands. Also controls resource allocation
so that the InfiniBand, ethernet and FC functions can share a
device without stepping on each other.
mlx4_ib: Handles InfiniBand-specific things; plugs into the
InfiniBand midlayer.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/mlx4/reset.c
new file mode 100644
index 0000000..51eef84
--- /dev/null
+++ b/drivers/net/mlx4/reset.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "mlx4.h"
+
+int mlx4_reset(struct mlx4_dev *dev)
+{
+ void __iomem *reset;
+ u32 *hca_header = NULL;
+ int pcie_cap;
+ u16 devctl;
+ u16 linkctl;
+ u16 vendor;
+ unsigned long end;
+ u32 sem;
+ int i;
+ int err = 0;
+
+#define MLX4_RESET_BASE 0xf0000
+#define MLX4_RESET_SIZE 0x400
+#define MLX4_SEM_OFFSET 0x3fc
+#define MLX4_RESET_OFFSET 0x10
+#define MLX4_RESET_VALUE swab32(1)
+
+#define MLX4_SEM_TIMEOUT_JIFFIES (10 * HZ)
+#define MLX4_RESET_TIMEOUT_JIFFIES (2 * HZ)
+
+ /*
+ * Reset the chip. This is somewhat ugly because we have to
+ * save off the PCI header before reset and then restore it
+ * after the chip reboots. We skip config space offsets 22
+ * and 23 since those have a special meaning.
+ */
+
+ /* Do we need to save off the full 4K PCI Express header?? */
+ hca_header = kmalloc(256, GFP_KERNEL);
+ if (!hca_header) {
+ err = -ENOMEM;
+ mlx4_err(dev, "Couldn't allocate memory to save HCA "
+ "PCI header, aborting.\n");
+ goto out;
+ }
+
+ pcie_cap = pci_find_capability(dev->pdev, PCI_CAP_ID_EXP);
+
+ for (i = 0; i < 64; ++i) {
+ if (i == 22 || i == 23)
+ continue;
+ if (pci_read_config_dword(dev->pdev, i * 4, hca_header + i)) {
+ err = -ENODEV;
+ mlx4_err(dev, "Couldn't save HCA "
+ "PCI header, aborting.\n");
+ goto out;
+ }
+ }
+
+ reset = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_RESET_BASE,
+ MLX4_RESET_SIZE);
+ if (!reset) {
+ err = -ENOMEM;
+ mlx4_err(dev, "Couldn't map HCA reset register, aborting.\n");
+ goto out;
+ }
+
+ /* grab HW semaphore to lock out flash updates */
+ end = jiffies + MLX4_SEM_TIMEOUT_JIFFIES;
+ do {
+ sem = readl(reset + MLX4_SEM_OFFSET);
+ if (!sem)
+ break;
+
+ msleep(1);
+ } while (time_before(jiffies, end));
+
+ if (sem) {
+ mlx4_err(dev, "Failed to obtain HW semaphore, aborting\n");
+ err = -EAGAIN;
+ iounmap(reset);
+ goto out;
+ }
+
+ /* actually hit reset */
+ writel(MLX4_RESET_VALUE, reset + MLX4_RESET_OFFSET);
+ iounmap(reset);
+
+ end = jiffies + MLX4_RESET_TIMEOUT_JIFFIES;
+ do {
+ if (!pci_read_config_word(dev->pdev, PCI_VENDOR_ID, &vendor) &&
+ vendor != 0xffff)
+ break;
+
+ msleep(1);
+ } while (time_before(jiffies, end));
+
+ if (vendor == 0xffff) {
+ err = -ENODEV;
+ mlx4_err(dev, "PCI device did not come back after reset, "
+ "aborting.\n");
+ goto out;
+ }
+
+ /* Now restore the PCI headers */
+ if (pcie_cap) {
+ devctl = hca_header[(pcie_cap + PCI_EXP_DEVCTL) / 4];
+ if (pci_write_config_word(dev->pdev, pcie_cap + PCI_EXP_DEVCTL,
+ devctl)) {
+ err = -ENODEV;
+ mlx4_err(dev, "Couldn't restore HCA PCI Express "
+ "Device Control register, aborting.\n");
+ goto out;
+ }
+ linkctl = hca_header[(pcie_cap + PCI_EXP_LNKCTL) / 4];
+ if (pci_write_config_word(dev->pdev, pcie_cap + PCI_EXP_LNKCTL,
+ linkctl)) {
+ err = -ENODEV;
+ mlx4_err(dev, "Couldn't restore HCA PCI Express "
+ "Link control register, aborting.\n");
+ goto out;
+ }
+ }
+
+ for (i = 0; i < 16; ++i) {
+ if (i * 4 == PCI_COMMAND)
+ continue;
+
+ if (pci_write_config_dword(dev->pdev, i * 4, hca_header[i])) {
+ err = -ENODEV;
+ mlx4_err(dev, "Couldn't restore HCA reg %x, "
+ "aborting.\n", i);
+ goto out;
+ }
+ }
+
+ if (pci_write_config_dword(dev->pdev, PCI_COMMAND,
+ hca_header[PCI_COMMAND / 4])) {
+ err = -ENODEV;
+ mlx4_err(dev, "Couldn't restore HCA COMMAND, "
+ "aborting.\n");
+ goto out;
+ }
+
+out:
+ kfree(hca_header);
+
+ return err;
+}