| /* |
| net-3-driver for the IBM LAN Adapter/A |
| |
| This is an extension to the Linux operating system, and is covered by the |
| same GNU General Public License that covers that work. |
| |
| Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, |
| alfred.arnold@lancom.de) |
| |
| This driver is based both on the SK_MCA driver, which is itself based on the |
| SK_G16 and 3C523 driver. |
| |
| paper sources: |
| 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by |
| Hans-Peter Messmer for the basic Microchannel stuff |
| |
| 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer |
| for help on Ethernet driver programming |
| |
| 'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National |
| Semiconductor for info on the MAC chip |
| |
| 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 |
| Document Number SC30-3661-00' by IBM for info on the adapter itself |
| |
| Also see http://www.natsemi.com/ |
| |
| special acknowledgements to: |
| - Bob Eager for helping me out with documentation from IBM |
| - Jim Shorney for his endless patience with me while I was using |
| him as a beta tester to trace down the address filter bug ;-) |
| |
| Missing things: |
| |
| -> set debug level via ioctl instead of compile-time switches |
| -> I didn't follow the development of the 2.1.x kernels, so my |
| assumptions about which things changed with which kernel version |
| are probably nonsense |
| |
| History: |
| Nov 6th, 1999 |
| startup from SK_MCA driver |
| Dec 6th, 1999 |
| finally got docs about the card. A big thank you to Bob Eager! |
| Dec 12th, 1999 |
| first packet received |
| Dec 13th, 1999 |
| recv queue done, tcpdump works |
| Dec 15th, 1999 |
| transmission part works |
| Dec 28th, 1999 |
| added usage of the isa_functions for Linux 2.3 . Things should |
| still work with 2.0.x.... |
| Jan 28th, 2000 |
| in Linux 2.2.13, the version.h file mysteriously didn't get |
| included. Added a workaround for this. Futhermore, it now |
| not only compiles as a modules ;-) |
| Jan 30th, 2000 |
| newer kernels automatically probe more than one board, so the |
| 'startslot' as a variable is also needed here |
| Apr 12th, 2000 |
| the interrupt mask register is not set 'hard' instead of individually |
| setting registers, since this seems to set bits that shouldn't be |
| set |
| May 21st, 2000 |
| reset interrupt status immediately after CAM load |
| add a recovery delay after releasing the chip's reset line |
| May 24th, 2000 |
| finally found the bug in the address filter setup - damned signed |
| chars! |
| June 1st, 2000 |
| corrected version codes, added support for the latest 2.3 changes |
| Oct 28th, 2002 |
| cleaned up for the 2.5 tree <alan@lxorguk.ukuu.org.uk> |
| |
| *************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/time.h> |
| #include <linux/mca.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| |
| #define _IBM_LANA_DRIVER_ |
| #include "ibmlana.h" |
| |
| #undef DEBUG |
| |
| #define DRV_NAME "ibmlana" |
| |
| /* ------------------------------------------------------------------------ |
| * global static data - not more since we can handle multiple boards and |
| * have to pack all state info into the device struct! |
| * ------------------------------------------------------------------------ */ |
| |
| static char *MediaNames[Media_Count] = { |
| "10BaseT", "10Base5", "Unknown", "10Base2" |
| }; |
| |
| /* ------------------------------------------------------------------------ |
| * private subfunctions |
| * ------------------------------------------------------------------------ */ |
| |
| #ifdef DEBUG |
| /* dump all registers */ |
| |
| static void dumpregs(struct net_device *dev) |
| { |
| int z; |
| |
| for (z = 0; z < 160; z += 2) { |
| if (!(z & 15)) |
| printk("REGS: %04x:", z); |
| printk(" %04x", inw(dev->base_addr + z)); |
| if ((z & 15) == 14) |
| printk("\n"); |
| } |
| } |
| |
| /* dump parts of shared memory - only needed during debugging */ |
| |
| static void dumpmem(struct net_device *dev, u32 start, u32 len) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| int z; |
| |
| printk("Address %04x:\n", start); |
| for (z = 0; z < len; z++) { |
| if ((z & 15) == 0) |
| printk("%04x:", z); |
| printk(" %02x", readb(priv->base + start + z)); |
| if ((z & 15) == 15) |
| printk("\n"); |
| } |
| if ((z & 15) != 0) |
| printk("\n"); |
| } |
| |
| /* print exact time - ditto */ |
| |
| static void PrTime(void) |
| { |
| struct timeval tv; |
| |
| do_gettimeofday(&tv); |
| printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); |
| } |
| #endif /* DEBUG */ |
| |
| /* deduce resources out of POS registers */ |
| |
| static void getaddrs(struct mca_device *mdev, int *base, int *memlen, |
| int *iobase, int *irq, ibmlana_medium *medium) |
| { |
| u_char pos0, pos1; |
| |
| pos0 = mca_device_read_stored_pos(mdev, 2); |
| pos1 = mca_device_read_stored_pos(mdev, 3); |
| |
| *base = 0xc0000 + ((pos1 & 0xf0) << 9); |
| *memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; |
| *iobase = (pos0 & 0xe0) << 7; |
| switch (pos0 & 0x06) { |
| case 0: |
| *irq = 5; |
| break; |
| case 2: |
| *irq = 15; |
| break; |
| case 4: |
| *irq = 10; |
| break; |
| case 6: |
| *irq = 11; |
| break; |
| } |
| *medium = (pos0 & 0x18) >> 3; |
| } |
| |
| /* wait on register value with mask and timeout */ |
| |
| static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, |
| u16 value, int timeout) |
| { |
| unsigned long fin = jiffies + timeout; |
| |
| while (time_before(jiffies,fin)) |
| if ((inw(dev->base_addr + regoffs) & mask) == value) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| /* reset the whole board */ |
| |
| static void ResetBoard(struct net_device *dev) |
| { |
| unsigned char bcmval; |
| |
| /* read original board control value */ |
| |
| bcmval = inb(dev->base_addr + BCMREG); |
| |
| /* set reset bit for a while */ |
| |
| bcmval |= BCMREG_RESET; |
| outb(bcmval, dev->base_addr + BCMREG); |
| udelay(10); |
| bcmval &= ~BCMREG_RESET; |
| outb(bcmval, dev->base_addr + BCMREG); |
| |
| /* switch over to RAM again */ |
| |
| bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; |
| outb(bcmval, dev->base_addr + BCMREG); |
| } |
| |
| /* calculate RAM layout & set up descriptors in RAM */ |
| |
| static void InitDscrs(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| u32 addr, baddr, raddr; |
| int z; |
| tda_t tda; |
| rda_t rda; |
| rra_t rra; |
| |
| /* initialize RAM */ |
| |
| memset_io(priv->base, 0xaa, |
| dev->mem_start - dev->mem_start); /* XXX: typo? */ |
| |
| /* setup n TX descriptors - independent of RAM size */ |
| |
| priv->tdastart = addr = 0; |
| priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; |
| for (z = 0; z < TXBUFCNT; z++) { |
| tda.status = 0; |
| tda.config = 0; |
| tda.length = 0; |
| tda.fragcount = 1; |
| tda.startlo = baddr; |
| tda.starthi = 0; |
| tda.fraglength = 0; |
| if (z == TXBUFCNT - 1) |
| tda.link = priv->tdastart; |
| else |
| tda.link = addr + sizeof(tda_t); |
| tda.link |= 1; |
| memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); |
| addr += sizeof(tda_t); |
| baddr += PKTSIZE; |
| } |
| |
| /* calculate how many receive buffers fit into remaining memory */ |
| |
| priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); |
| |
| /* calculate receive addresses */ |
| |
| priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); |
| priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); |
| priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); |
| |
| for (z = 0; z < priv->rxbufcnt; z++) { |
| rra.startlo = baddr; |
| rra.starthi = 0; |
| rra.cntlo = PKTSIZE >> 1; |
| rra.cnthi = 0; |
| memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); |
| |
| rda.status = 0; |
| rda.length = 0; |
| rda.startlo = 0; |
| rda.starthi = 0; |
| rda.seqno = 0; |
| if (z < priv->rxbufcnt - 1) |
| rda.link = addr + sizeof(rda_t); |
| else |
| rda.link = 1; |
| rda.inuse = 1; |
| memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); |
| |
| baddr += PKTSIZE; |
| raddr += sizeof(rra_t); |
| addr += sizeof(rda_t); |
| } |
| |
| /* initialize current pointers */ |
| |
| priv->nextrxdescr = 0; |
| priv->lastrxdescr = priv->rxbufcnt - 1; |
| priv->nexttxdescr = 0; |
| priv->currtxdescr = 0; |
| priv->txusedcnt = 0; |
| memset(priv->txused, 0, sizeof(priv->txused)); |
| } |
| |
| /* set up Rx + Tx descriptors in SONIC */ |
| |
| static int InitSONIC(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| |
| /* set up start & end of resource area */ |
| |
| outw(0, SONIC_URRA); |
| outw(priv->rrastart, dev->base_addr + SONIC_RSA); |
| outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); |
| outw(priv->rrastart, dev->base_addr + SONIC_RRP); |
| outw(priv->rrastart, dev->base_addr + SONIC_RWP); |
| |
| /* set EOBC so that only one packet goes into one buffer */ |
| |
| outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); |
| |
| /* let SONIC read the first RRA descriptor */ |
| |
| outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); |
| if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { |
| printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); |
| return 0; |
| } |
| |
| /* point SONIC to the first RDA */ |
| |
| outw(0, dev->base_addr + SONIC_URDA); |
| outw(priv->rdastart, dev->base_addr + SONIC_CRDA); |
| |
| /* set upper half of TDA address */ |
| |
| outw(0, dev->base_addr + SONIC_UTDA); |
| |
| return 1; |
| } |
| |
| /* stop SONIC so we can reinitialize it */ |
| |
| static void StopSONIC(struct net_device *dev) |
| { |
| /* disable interrupts */ |
| |
| outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); |
| outb(0, dev->base_addr + SONIC_IMREG); |
| |
| /* reset the SONIC */ |
| |
| outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); |
| udelay(10); |
| outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); |
| } |
| |
| /* initialize card and SONIC for proper operation */ |
| |
| static void putcam(camentry_t * cams, int *camcnt, char *addr) |
| { |
| camentry_t *pcam = cams + (*camcnt); |
| u8 *uaddr = (u8 *) addr; |
| |
| pcam->index = *camcnt; |
| pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; |
| pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; |
| pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; |
| (*camcnt)++; |
| } |
| |
| static void InitBoard(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| int camcnt; |
| camentry_t cams[16]; |
| u32 cammask; |
| struct netdev_hw_addr *ha; |
| u16 rcrval; |
| |
| /* reset the SONIC */ |
| |
| outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); |
| udelay(10); |
| |
| /* clear all spurious interrupts */ |
| |
| outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); |
| |
| /* set up the SONIC's bus interface - constant for this adapter - |
| must be done while the SONIC is in reset */ |
| |
| outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); |
| outw(0, dev->base_addr + SONIC_DCREG2); |
| |
| /* remove reset form the SONIC */ |
| |
| outw(0, dev->base_addr + SONIC_CMDREG); |
| udelay(10); |
| |
| /* data sheet requires URRA to be programmed before setting up the CAM contents */ |
| |
| outw(0, dev->base_addr + SONIC_URRA); |
| |
| /* program the CAM entry 0 to the device address */ |
| |
| camcnt = 0; |
| putcam(cams, &camcnt, dev->dev_addr); |
| |
| /* start putting the multicast addresses into the CAM list. Stop if |
| it is full. */ |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| putcam(cams, &camcnt, ha->addr); |
| if (camcnt == 16) |
| break; |
| } |
| |
| /* calculate CAM mask */ |
| |
| cammask = (1 << camcnt) - 1; |
| |
| /* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ |
| |
| memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); |
| memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); |
| |
| #ifdef DEBUG |
| printk("CAM setup:\n"); |
| dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); |
| #endif |
| |
| outw(0, dev->base_addr + SONIC_CAMPTR); |
| outw(camcnt, dev->base_addr + SONIC_CAMCNT); |
| outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); |
| if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { |
| printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); |
| return; |
| } else { |
| /* clear interrupt condition */ |
| |
| outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); |
| |
| #ifdef DEBUG |
| printk("Loading CAM done, address pointers %04x:%04x\n", |
| inw(dev->base_addr + SONIC_URRA), |
| inw(dev->base_addr + SONIC_CAMPTR)); |
| { |
| int z; |
| |
| printk("\n-->CAM: PTR %04x CNT %04x\n", |
| inw(dev->base_addr + SONIC_CAMPTR), |
| inw(dev->base_addr + SONIC_CAMCNT)); |
| outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); |
| for (z = 0; z < camcnt; z++) { |
| outw(z, dev->base_addr + SONIC_CAMEPTR); |
| printk("Entry %d: %04x %04x %04x\n", z, |
| inw(dev->base_addr + SONIC_CAMADDR0), |
| inw(dev->base_addr + SONIC_CAMADDR1), |
| inw(dev->base_addr + SONIC_CAMADDR2)); |
| } |
| outw(0, dev->base_addr + SONIC_CMDREG); |
| } |
| #endif |
| } |
| |
| rcrval = RCREG_BRD | RCREG_LB_NONE; |
| |
| /* if still multicast addresses left or ALLMULTI is set, set the multicast |
| enable bit */ |
| |
| if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) |
| rcrval |= RCREG_AMC; |
| |
| /* promiscous mode ? */ |
| |
| if (dev->flags & IFF_PROMISC) |
| rcrval |= RCREG_PRO; |
| |
| /* program receive mode */ |
| |
| outw(rcrval, dev->base_addr + SONIC_RCREG); |
| #ifdef DEBUG |
| printk("\nRCRVAL: %04x\n", rcrval); |
| #endif |
| |
| /* set up descriptors in shared memory + feed them into SONIC registers */ |
| |
| InitDscrs(dev); |
| if (!InitSONIC(dev)) |
| return; |
| |
| /* reset all pending interrupts */ |
| |
| outw(0xffff, dev->base_addr + SONIC_ISREG); |
| |
| /* enable transmitter + receiver interrupts */ |
| |
| outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); |
| outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); |
| |
| /* turn on card interrupts */ |
| |
| outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); |
| |
| #ifdef DEBUG |
| printk("Register dump after initialization:\n"); |
| dumpregs(dev); |
| #endif |
| } |
| |
| /* start transmission of a descriptor */ |
| |
| static void StartTx(struct net_device *dev, int descr) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| int addr; |
| |
| addr = priv->tdastart + (descr * sizeof(tda_t)); |
| |
| /* put descriptor address into SONIC */ |
| |
| outw(addr, dev->base_addr + SONIC_CTDA); |
| |
| /* trigger transmitter */ |
| |
| priv->currtxdescr = descr; |
| outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * interrupt handler(s) |
| * ------------------------------------------------------------------------ */ |
| |
| /* receive buffer area exhausted */ |
| |
| static void irqrbe_handler(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| |
| /* point the SONIC back to the RRA start */ |
| |
| outw(priv->rrastart, dev->base_addr + SONIC_RRP); |
| outw(priv->rrastart, dev->base_addr + SONIC_RWP); |
| } |
| |
| /* receive interrupt */ |
| |
| static void irqrx_handler(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| rda_t rda; |
| u32 rdaaddr, lrdaaddr; |
| |
| /* loop until ... */ |
| |
| while (1) { |
| /* read descriptor that was next to be filled by SONIC */ |
| |
| rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); |
| lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); |
| memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); |
| |
| /* iron out upper word halves of fields we use - SONIC will duplicate |
| bits 0..15 to 16..31 */ |
| |
| rda.status &= 0xffff; |
| rda.length &= 0xffff; |
| rda.startlo &= 0xffff; |
| |
| /* stop if the SONIC still owns it, i.e. there is no data for us */ |
| |
| if (rda.inuse) |
| break; |
| |
| /* good packet? */ |
| |
| else if (rda.status & RCREG_PRX) { |
| struct sk_buff *skb; |
| |
| /* fetch buffer */ |
| |
| skb = dev_alloc_skb(rda.length + 2); |
| if (skb == NULL) |
| dev->stats.rx_dropped++; |
| else { |
| /* copy out data */ |
| |
| memcpy_fromio(skb_put(skb, rda.length), |
| priv->base + |
| rda.startlo, rda.length); |
| |
| /* set up skb fields */ |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| /* bookkeeping */ |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += rda.length; |
| |
| /* pass to the upper layers */ |
| netif_rx(skb); |
| } |
| } |
| |
| /* otherwise check error status bits and increase statistics */ |
| |
| else { |
| dev->stats.rx_errors++; |
| if (rda.status & RCREG_FAER) |
| dev->stats.rx_frame_errors++; |
| if (rda.status & RCREG_CRCR) |
| dev->stats.rx_crc_errors++; |
| } |
| |
| /* descriptor processed, will become new last descriptor in queue */ |
| |
| rda.link = 1; |
| rda.inuse = 1; |
| memcpy_toio(priv->base + rdaaddr, &rda, |
| sizeof(rda_t)); |
| |
| /* set up link and EOL = 0 in currently last descriptor. Only write |
| the link field since the SONIC may currently already access the |
| other fields. */ |
| |
| memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); |
| |
| /* advance indices */ |
| |
| priv->lastrxdescr = priv->nextrxdescr; |
| if ((++priv->nextrxdescr) >= priv->rxbufcnt) |
| priv->nextrxdescr = 0; |
| } |
| } |
| |
| /* transmit interrupt */ |
| |
| static void irqtx_handler(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| tda_t tda; |
| |
| /* fetch descriptor (we forgot the size ;-) */ |
| memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); |
| |
| /* update statistics */ |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += tda.length; |
| |
| /* update our pointers */ |
| priv->txused[priv->currtxdescr] = 0; |
| priv->txusedcnt--; |
| |
| /* if there are more descriptors present in RAM, start them */ |
| if (priv->txusedcnt > 0) |
| StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); |
| |
| /* tell the upper layer we can go on transmitting */ |
| netif_wake_queue(dev); |
| } |
| |
| static void irqtxerr_handler(struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| tda_t tda; |
| |
| /* fetch descriptor to check status */ |
| memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); |
| |
| /* update statistics */ |
| dev->stats.tx_errors++; |
| if (tda.status & (TCREG_NCRS | TCREG_CRSL)) |
| dev->stats.tx_carrier_errors++; |
| if (tda.status & TCREG_EXC) |
| dev->stats.tx_aborted_errors++; |
| if (tda.status & TCREG_OWC) |
| dev->stats.tx_window_errors++; |
| if (tda.status & TCREG_FU) |
| dev->stats.tx_fifo_errors++; |
| |
| /* update our pointers */ |
| priv->txused[priv->currtxdescr] = 0; |
| priv->txusedcnt--; |
| |
| /* if there are more descriptors present in RAM, start them */ |
| if (priv->txusedcnt > 0) |
| StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); |
| |
| /* tell the upper layer we can go on transmitting */ |
| netif_wake_queue(dev); |
| } |
| |
| /* general interrupt entry */ |
| |
| static irqreturn_t irq_handler(int dummy, void *device) |
| { |
| struct net_device *dev = device; |
| u16 ival; |
| |
| /* in case we're not meant... */ |
| if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) |
| return IRQ_NONE; |
| |
| /* loop through the interrupt bits until everything is clear */ |
| while (1) { |
| ival = inw(dev->base_addr + SONIC_ISREG); |
| |
| if (ival & ISREG_RBE) { |
| irqrbe_handler(dev); |
| outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); |
| } |
| if (ival & ISREG_PKTRX) { |
| irqrx_handler(dev); |
| outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); |
| } |
| if (ival & ISREG_TXDN) { |
| irqtx_handler(dev); |
| outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); |
| } |
| if (ival & ISREG_TXER) { |
| irqtxerr_handler(dev); |
| outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); |
| } |
| break; |
| } |
| return IRQ_HANDLED; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * driver methods |
| * ------------------------------------------------------------------------ */ |
| |
| /* MCA info */ |
| |
| #if 0 /* info available elsewhere, but this is kept for reference */ |
| static int ibmlana_getinfo(char *buf, int slot, void *d) |
| { |
| int len = 0, i; |
| struct net_device *dev = (struct net_device *) d; |
| ibmlana_priv *priv; |
| |
| /* can't say anything about an uninitialized device... */ |
| |
| if (dev == NULL) |
| return len; |
| priv = netdev_priv(dev); |
| |
| /* print info */ |
| |
| len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); |
| len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); |
| len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); |
| len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); |
| len += sprintf(buf + len, "Device: %s\n", dev->name); |
| len += sprintf(buf + len, "MAC address:"); |
| for (i = 0; i < 6; i++) |
| len += sprintf(buf + len, " %02x", dev->dev_addr[i]); |
| buf[len++] = '\n'; |
| buf[len] = 0; |
| |
| return len; |
| } |
| #endif |
| |
| /* open driver. Means also initialization and start of LANCE */ |
| |
| static int ibmlana_open(struct net_device *dev) |
| { |
| int result; |
| ibmlana_priv *priv = netdev_priv(dev); |
| |
| /* register resources - only necessary for IRQ */ |
| |
| result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev); |
| if (result != 0) { |
| printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); |
| return result; |
| } |
| dev->irq = priv->realirq; |
| |
| /* set up the card and SONIC */ |
| InitBoard(dev); |
| |
| /* initialize operational flags */ |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| /* close driver. Shut down board and free allocated resources */ |
| |
| static int ibmlana_close(struct net_device *dev) |
| { |
| /* turn off board */ |
| |
| /* release resources */ |
| if (dev->irq != 0) |
| free_irq(dev->irq, dev); |
| dev->irq = 0; |
| return 0; |
| } |
| |
| /* transmit a block. */ |
| |
| static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev) |
| { |
| ibmlana_priv *priv = netdev_priv(dev); |
| int tmplen, addr; |
| unsigned long flags; |
| tda_t tda; |
| int baddr; |
| |
| /* find out if there are free slots for a frame to transmit. If not, |
| the upper layer is in deep desperation and we simply ignore the frame. */ |
| |
| if (priv->txusedcnt >= TXBUFCNT) { |
| dev->stats.tx_dropped++; |
| goto tx_done; |
| } |
| |
| /* copy the frame data into the next free transmit buffer - fillup missing */ |
| tmplen = skb->len; |
| if (tmplen < 60) |
| tmplen = 60; |
| baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); |
| memcpy_toio(priv->base + baddr, skb->data, skb->len); |
| |
| /* copy filler into RAM - in case we're filling up... |
| we're filling a bit more than necessary, but that doesn't harm |
| since the buffer is far larger... |
| Sorry Linus for the filler string but I couldn't resist ;-) */ |
| |
| if (tmplen > skb->len) { |
| char *fill = "NetBSD is a nice OS too! "; |
| unsigned int destoffs = skb->len, l = strlen(fill); |
| |
| while (destoffs < tmplen) { |
| memcpy_toio(priv->base + baddr + destoffs, fill, l); |
| destoffs += l; |
| } |
| } |
| |
| /* set up the new frame descriptor */ |
| addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); |
| memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); |
| tda.length = tda.fraglength = tmplen; |
| memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); |
| |
| /* if there were no active descriptors, trigger the SONIC */ |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| priv->txusedcnt++; |
| priv->txused[priv->nexttxdescr] = 1; |
| |
| /* are all transmission slots used up ? */ |
| if (priv->txusedcnt >= TXBUFCNT) |
| netif_stop_queue(dev); |
| |
| if (priv->txusedcnt == 1) |
| StartTx(dev, priv->nexttxdescr); |
| priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| tx_done: |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* switch receiver mode. */ |
| |
| static void ibmlana_set_multicast_list(struct net_device *dev) |
| { |
| /* first stop the SONIC... */ |
| StopSONIC(dev); |
| /* ...then reinit it with the new flags */ |
| InitBoard(dev); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * hardware check |
| * ------------------------------------------------------------------------ */ |
| |
| static int ibmlana_irq; |
| static int ibmlana_io; |
| static int startslot; /* counts through slots when probing multiple devices */ |
| |
| static short ibmlana_adapter_ids[] __initdata = { |
| IBM_LANA_ID, |
| 0x0000 |
| }; |
| |
| static char *ibmlana_adapter_names[] __devinitdata = { |
| "IBM LAN Adapter/A", |
| NULL |
| }; |
| |
| |
| static const struct net_device_ops ibmlana_netdev_ops = { |
| .ndo_open = ibmlana_open, |
| .ndo_stop = ibmlana_close, |
| .ndo_start_xmit = ibmlana_tx, |
| .ndo_set_multicast_list = ibmlana_set_multicast_list, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int __devinit ibmlana_init_one(struct device *kdev) |
| { |
| struct mca_device *mdev = to_mca_device(kdev); |
| struct net_device *dev; |
| int slot = mdev->slot, z, rc; |
| int base = 0, irq = 0, iobase = 0, memlen = 0; |
| ibmlana_priv *priv; |
| ibmlana_medium medium; |
| |
| dev = alloc_etherdev(sizeof(ibmlana_priv)); |
| if (!dev) |
| return -ENOMEM; |
| |
| dev->irq = ibmlana_irq; |
| dev->base_addr = ibmlana_io; |
| |
| base = dev->mem_start; |
| irq = dev->irq; |
| |
| /* deduce card addresses */ |
| getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); |
| |
| /* were we looking for something different ? */ |
| if (dev->irq && dev->irq != irq) { |
| rc = -ENODEV; |
| goto err_out; |
| } |
| if (dev->mem_start && dev->mem_start != base) { |
| rc = -ENODEV; |
| goto err_out; |
| } |
| |
| /* announce success */ |
| printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); |
| |
| /* try to obtain I/O range */ |
| if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { |
| printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); |
| startslot = slot + 1; |
| rc = -EBUSY; |
| goto err_out; |
| } |
| |
| priv = netdev_priv(dev); |
| priv->slot = slot; |
| priv->realirq = mca_device_transform_irq(mdev, irq); |
| priv->medium = medium; |
| spin_lock_init(&priv->lock); |
| |
| /* set base + irq for this device (irq not allocated so far) */ |
| |
| dev->irq = 0; |
| dev->mem_start = base; |
| dev->mem_end = base + memlen; |
| dev->base_addr = iobase; |
| |
| priv->base = ioremap(base, memlen); |
| if (!priv->base) { |
| printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); |
| startslot = slot + 1; |
| rc = -EBUSY; |
| goto err_out_reg; |
| } |
| |
| mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); |
| mca_device_set_claim(mdev, 1); |
| |
| /* set methods */ |
| dev->netdev_ops = &ibmlana_netdev_ops; |
| dev->flags |= IFF_MULTICAST; |
| |
| /* copy out MAC address */ |
| |
| for (z = 0; z < ETH_ALEN; z++) |
| dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); |
| |
| /* print config */ |
| |
| printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " |
| "MAC address %pM.\n", |
| dev->name, priv->realirq, dev->base_addr, |
| dev->mem_start, dev->mem_end - 1, |
| dev->dev_addr); |
| printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); |
| |
| /* reset board */ |
| |
| ResetBoard(dev); |
| |
| /* next probe will start at next slot */ |
| |
| startslot = slot + 1; |
| |
| rc = register_netdev(dev); |
| if (rc) |
| goto err_out_claimed; |
| |
| dev_set_drvdata(kdev, dev); |
| return 0; |
| |
| err_out_claimed: |
| mca_device_set_claim(mdev, 0); |
| iounmap(priv->base); |
| err_out_reg: |
| release_region(iobase, IBM_LANA_IORANGE); |
| err_out: |
| free_netdev(dev); |
| return rc; |
| } |
| |
| static int ibmlana_remove_one(struct device *kdev) |
| { |
| struct mca_device *mdev = to_mca_device(kdev); |
| struct net_device *dev = dev_get_drvdata(kdev); |
| ibmlana_priv *priv = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| /*DeinitBoard(dev); */ |
| release_region(dev->base_addr, IBM_LANA_IORANGE); |
| mca_device_set_claim(mdev, 0); |
| iounmap(priv->base); |
| free_netdev(dev); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * modularization support |
| * ------------------------------------------------------------------------ */ |
| |
| module_param_named(irq, ibmlana_irq, int, 0); |
| module_param_named(io, ibmlana_io, int, 0); |
| MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); |
| MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); |
| MODULE_LICENSE("GPL"); |
| |
| static struct mca_driver ibmlana_driver = { |
| .id_table = ibmlana_adapter_ids, |
| .driver = { |
| .name = "ibmlana", |
| .bus = &mca_bus_type, |
| .probe = ibmlana_init_one, |
| .remove = ibmlana_remove_one, |
| }, |
| }; |
| |
| static int __init ibmlana_init_module(void) |
| { |
| return mca_register_driver(&ibmlana_driver); |
| } |
| |
| static void __exit ibmlana_cleanup_module(void) |
| { |
| mca_unregister_driver(&ibmlana_driver); |
| } |
| |
| module_init(ibmlana_init_module); |
| module_exit(ibmlana_cleanup_module); |