| /* arch/arm/mach-msm/smd.c |
| * |
| * Copyright (C) 2007 Google, Inc. |
| * Copyright (c) 2008-2013, The Linux Foundation. All rights reserved. |
| * Author: Brian Swetland <swetland@google.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/cdev.h> |
| #include <linux/device.h> |
| #include <linux/wait.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/termios.h> |
| #include <linux/ctype.h> |
| #include <linux/remote_spinlock.h> |
| #include <linux/uaccess.h> |
| #include <linux/kfifo.h> |
| #include <linux/wakelock.h> |
| #include <linux/notifier.h> |
| #include <linux/suspend.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| |
| #include <mach/msm_smd.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/system.h> |
| #include <mach/subsystem_notif.h> |
| #include <mach/socinfo.h> |
| #include <mach/proc_comm.h> |
| #include <mach/msm_ipc_logging.h> |
| #include <mach/ramdump.h> |
| #include <mach/board.h> |
| #include <mach/msm_smem.h> |
| |
| #include <asm/cacheflush.h> |
| |
| #include "smd_private.h" |
| #include "modem_notifier.h" |
| #include "smem_private.h" |
| |
| #define SMD_VERSION 0x00020000 |
| #define SMSM_SNAPSHOT_CNT 64 |
| #define SMSM_SNAPSHOT_SIZE ((SMSM_NUM_ENTRIES + 1) * 4 + sizeof(uint64_t)) |
| #define RSPIN_INIT_WAIT_MS 1000 |
| #define SMD_FIFO_FULL_RESERVE 4 |
| |
| uint32_t SMSM_NUM_ENTRIES = 8; |
| uint32_t SMSM_NUM_HOSTS = 3; |
| |
| /* Legacy SMSM interrupt notifications */ |
| #define LEGACY_MODEM_SMSM_MASK (SMSM_RESET | SMSM_INIT | SMSM_SMDINIT \ |
| | SMSM_RUN | SMSM_SYSTEM_DOWNLOAD) |
| |
| struct smsm_shared_info { |
| uint32_t *state; |
| uint32_t *intr_mask; |
| uint32_t *intr_mux; |
| }; |
| |
| static struct smsm_shared_info smsm_info; |
| static struct kfifo smsm_snapshot_fifo; |
| static struct wake_lock smsm_snapshot_wakelock; |
| static int smsm_snapshot_count; |
| static DEFINE_SPINLOCK(smsm_snapshot_count_lock); |
| |
| struct smsm_size_info_type { |
| uint32_t num_hosts; |
| uint32_t num_entries; |
| uint32_t reserved0; |
| uint32_t reserved1; |
| }; |
| |
| struct smsm_state_cb_info { |
| struct list_head cb_list; |
| uint32_t mask; |
| void *data; |
| void (*notify)(void *data, uint32_t old_state, uint32_t new_state); |
| }; |
| |
| struct smsm_state_info { |
| struct list_head callbacks; |
| uint32_t last_value; |
| uint32_t intr_mask_set; |
| uint32_t intr_mask_clear; |
| }; |
| |
| static irqreturn_t smsm_irq_handler(int irq, void *data); |
| |
| /* |
| * Interrupt configuration consists of static configuration for the supported |
| * processors that is done here along with interrupt configuration that is |
| * added by the separate initialization modules (device tree, platform data, or |
| * hard coded). |
| */ |
| static struct interrupt_config private_intr_config[NUM_SMD_SUBSYSTEMS] = { |
| [SMD_MODEM] = { |
| .smd.irq_handler = smd_modem_irq_handler, |
| .smsm.irq_handler = smsm_modem_irq_handler, |
| }, |
| [SMD_Q6] = { |
| .smd.irq_handler = smd_dsp_irq_handler, |
| .smsm.irq_handler = smsm_dsp_irq_handler, |
| }, |
| [SMD_DSPS] = { |
| .smd.irq_handler = smd_dsps_irq_handler, |
| .smsm.irq_handler = smsm_dsps_irq_handler, |
| }, |
| [SMD_WCNSS] = { |
| .smd.irq_handler = smd_wcnss_irq_handler, |
| .smsm.irq_handler = smsm_wcnss_irq_handler, |
| }, |
| [SMD_RPM] = { |
| .smd.irq_handler = smd_rpm_irq_handler, |
| .smsm.irq_handler = NULL, /* does not support smsm */ |
| }, |
| }; |
| |
| struct interrupt_stat interrupt_stats[NUM_SMD_SUBSYSTEMS]; |
| |
| #define SMSM_STATE_ADDR(entry) (smsm_info.state + entry) |
| #define SMSM_INTR_MASK_ADDR(entry, host) (smsm_info.intr_mask + \ |
| entry * SMSM_NUM_HOSTS + host) |
| #define SMSM_INTR_MUX_ADDR(entry) (smsm_info.intr_mux + entry) |
| |
| /* Internal definitions which are not exported in some targets */ |
| enum { |
| SMSM_APPS_DEM_I = 3, |
| }; |
| |
| int msm_smd_debug_mask = MSM_SMD_POWER_INFO | MSM_SMD_INFO | |
| MSM_SMSM_POWER_INFO; |
| module_param_named(debug_mask, msm_smd_debug_mask, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| void *smd_log_ctx; |
| void *smsm_log_ctx; |
| #define NUM_LOG_PAGES 4 |
| |
| #define IPC_LOG_SMD(level, x...) do { \ |
| if (smd_log_ctx) \ |
| ipc_log_string(smd_log_ctx, x); \ |
| else \ |
| printk(level x); \ |
| } while (0) |
| |
| #define IPC_LOG_SMSM(level, x...) do { \ |
| if (smsm_log_ctx) \ |
| ipc_log_string(smsm_log_ctx, x); \ |
| else \ |
| printk(level x); \ |
| } while (0) |
| |
| #if defined(CONFIG_MSM_SMD_DEBUG) |
| #define SMD_DBG(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMD_DEBUG) \ |
| IPC_LOG_SMD(KERN_DEBUG, x); \ |
| } while (0) |
| |
| #define SMSM_DBG(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMSM_DEBUG) \ |
| IPC_LOG_SMSM(KERN_DEBUG, x); \ |
| } while (0) |
| |
| #define SMD_INFO(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMD_INFO) \ |
| IPC_LOG_SMD(KERN_INFO, x); \ |
| } while (0) |
| |
| #define SMSM_INFO(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMSM_INFO) \ |
| IPC_LOG_SMSM(KERN_INFO, x); \ |
| } while (0) |
| |
| #define SMD_POWER_INFO(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMD_POWER_INFO) \ |
| IPC_LOG_SMD(KERN_INFO, x); \ |
| } while (0) |
| |
| #define SMSM_POWER_INFO(x...) do { \ |
| if (msm_smd_debug_mask & MSM_SMSM_POWER_INFO) \ |
| IPC_LOG_SMSM(KERN_INFO, x); \ |
| } while (0) |
| #else |
| #define SMD_DBG(x...) do { } while (0) |
| #define SMSM_DBG(x...) do { } while (0) |
| #define SMD_INFO(x...) do { } while (0) |
| #define SMSM_INFO(x...) do { } while (0) |
| #define SMD_POWER_INFO(x...) do { } while (0) |
| #define SMSM_POWER_INFO(x...) do { } while (0) |
| #endif |
| |
| /** |
| * OVERFLOW_ADD_UNSIGNED() - check for unsigned overflow |
| * |
| * @type: type to check for overflow |
| * @a: left value to use |
| * @b: right value to use |
| * @returns: true if a + b will result in overflow; false otherwise |
| */ |
| #define OVERFLOW_ADD_UNSIGNED(type, a, b) \ |
| (((type)~0 - (a)) < (b) ? true : false) |
| |
| static inline void smd_write_intr(unsigned int val, |
| const void __iomem *addr); |
| #ifndef INT_ADSP_A11_SMSM |
| #define INT_ADSP_A11_SMSM -1 |
| #endif |
| |
| #define SMD_LOOPBACK_CID 100 |
| |
| static LIST_HEAD(smd_ch_list_loopback); |
| static void smd_fake_irq_handler(unsigned long arg); |
| static void smsm_cb_snapshot(uint32_t use_wakelock); |
| |
| static struct workqueue_struct *smsm_cb_wq; |
| static void notify_smsm_cb_clients_worker(struct work_struct *work); |
| static DECLARE_WORK(smsm_cb_work, notify_smsm_cb_clients_worker); |
| static DEFINE_MUTEX(smsm_lock); |
| static struct smsm_state_info *smsm_states; |
| |
| static int smd_stream_write_avail(struct smd_channel *ch); |
| static int smd_stream_read_avail(struct smd_channel *ch); |
| |
| static bool pid_is_on_edge(uint32_t edge_num, unsigned pid); |
| |
| static inline void smd_write_intr(unsigned int val, |
| const void __iomem *addr) |
| { |
| wmb(); |
| __raw_writel(val, addr); |
| } |
| |
| static inline void log_notify(uint32_t subsystem, smd_channel_t *ch) |
| { |
| const char *subsys = smd_edge_to_subsystem(subsystem); |
| |
| (void) subsys; |
| |
| if (!ch) |
| SMD_POWER_INFO("Apps->%s\n", subsys); |
| else |
| SMD_POWER_INFO( |
| "Apps->%s ch%d '%s': tx%d/rx%d %dr/%dw : %dr/%dw\n", |
| subsys, ch->n, ch->name, |
| ch->fifo_size - |
| (smd_stream_write_avail(ch) + 1), |
| smd_stream_read_avail(ch), |
| ch->half_ch->get_tail(ch->send), |
| ch->half_ch->get_head(ch->send), |
| ch->half_ch->get_tail(ch->recv), |
| ch->half_ch->get_head(ch->recv) |
| ); |
| } |
| |
| static inline void notify_modem_smd(smd_channel_t *ch) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_MODEM].smd; |
| |
| log_notify(SMD_APPS_MODEM, ch); |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_MODEM].smd_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_dsp_smd(smd_channel_t *ch) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_Q6].smd; |
| |
| log_notify(SMD_APPS_QDSP, ch); |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_Q6].smd_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_dsps_smd(smd_channel_t *ch) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_DSPS].smd; |
| |
| log_notify(SMD_APPS_DSPS, ch); |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_DSPS].smd_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_wcnss_smd(struct smd_channel *ch) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_WCNSS].smd; |
| |
| log_notify(SMD_APPS_WCNSS, ch); |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_WCNSS].smd_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_rpm_smd(smd_channel_t *ch) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_RPM].smd; |
| |
| if (intr->out_base) { |
| log_notify(SMD_APPS_RPM, ch); |
| ++interrupt_stats[SMD_RPM].smd_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_modem_smsm(void) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_MODEM].smsm; |
| |
| SMSM_POWER_INFO("SMSM Apps->%s", "MODEM"); |
| |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_MODEM].smsm_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_dsp_smsm(void) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_Q6].smsm; |
| |
| SMSM_POWER_INFO("SMSM Apps->%s", "ADSP"); |
| |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_Q6].smsm_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_dsps_smsm(void) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_DSPS].smsm; |
| |
| SMSM_POWER_INFO("SMSM Apps->%s", "DSPS"); |
| |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_DSPS].smsm_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static inline void notify_wcnss_smsm(void) |
| { |
| static const struct interrupt_config_item *intr |
| = &private_intr_config[SMD_WCNSS].smsm; |
| |
| SMSM_POWER_INFO("SMSM Apps->%s", "WCNSS"); |
| |
| if (intr->out_base) { |
| ++interrupt_stats[SMD_WCNSS].smsm_out_config_count; |
| smd_write_intr(intr->out_bit_pos, |
| intr->out_base + intr->out_offset); |
| } |
| } |
| |
| static void notify_other_smsm(uint32_t smsm_entry, uint32_t notify_mask) |
| { |
| /* older protocol don't use smsm_intr_mask, |
| but still communicates with modem */ |
| if (!smsm_info.intr_mask || |
| (__raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_MODEM)) |
| & notify_mask)) |
| notify_modem_smsm(); |
| |
| if (smsm_info.intr_mask && |
| (__raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_Q6)) |
| & notify_mask)) { |
| uint32_t mux_val; |
| |
| if (cpu_is_qsd8x50() && smsm_info.intr_mux) { |
| mux_val = __raw_readl( |
| SMSM_INTR_MUX_ADDR(SMEM_APPS_Q6_SMSM)); |
| mux_val++; |
| __raw_writel(mux_val, |
| SMSM_INTR_MUX_ADDR(SMEM_APPS_Q6_SMSM)); |
| } |
| notify_dsp_smsm(); |
| } |
| |
| if (smsm_info.intr_mask && |
| (__raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_WCNSS)) |
| & notify_mask)) { |
| notify_wcnss_smsm(); |
| } |
| |
| if (smsm_info.intr_mask && |
| (__raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_DSPS)) |
| & notify_mask)) { |
| notify_dsps_smsm(); |
| } |
| |
| /* |
| * Notify local SMSM callback clients without wakelock since this |
| * code is used by power management during power-down/-up sequencing |
| * on DEM-based targets. Grabbing a wakelock in this case will |
| * abort the power-down sequencing. |
| */ |
| if (smsm_info.intr_mask && |
| (__raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)) |
| & notify_mask)) { |
| smsm_cb_snapshot(0); |
| } |
| } |
| |
| static int smsm_pm_notifier(struct notifier_block *nb, |
| unsigned long event, void *unused) |
| { |
| switch (event) { |
| case PM_SUSPEND_PREPARE: |
| smsm_change_state(SMSM_APPS_STATE, SMSM_PROC_AWAKE, 0); |
| break; |
| |
| case PM_POST_SUSPEND: |
| smsm_change_state(SMSM_APPS_STATE, 0, SMSM_PROC_AWAKE); |
| break; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block smsm_pm_nb = { |
| .notifier_call = smsm_pm_notifier, |
| .priority = 0, |
| }; |
| |
| void smd_diag(void) |
| { |
| char *x; |
| int size; |
| |
| x = smem_find_to_proc(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG, 0, |
| SMEM_ANY_HOST_FLAG); |
| if (x != 0) { |
| x[SZ_DIAG_ERR_MSG - 1] = 0; |
| SMD_INFO("smem: DIAG '%s'\n", x); |
| } |
| |
| x = smem_get_entry_to_proc(SMEM_ERR_CRASH_LOG, &size, 0, |
| SMEM_ANY_HOST_FLAG); |
| if (x != 0) { |
| x[size - 1] = 0; |
| pr_err("smem: CRASH LOG\n'%s'\n", x); |
| } |
| } |
| |
| |
| static void handle_modem_crash(void) |
| { |
| pr_err("MODEM/AMSS has CRASHED\n"); |
| smd_diag(); |
| |
| /* hard reboot if possible FIXME |
| if (msm_reset_hook) |
| msm_reset_hook(); |
| */ |
| |
| /* in this case the modem or watchdog should reboot us */ |
| for (;;) |
| ; |
| } |
| |
| int smsm_check_for_modem_crash(void) |
| { |
| /* if the modem's not ready yet, we have to hope for the best */ |
| if (!smsm_info.state) |
| return 0; |
| |
| if (__raw_readl(SMSM_STATE_ADDR(SMSM_MODEM_STATE)) & SMSM_RESET) { |
| handle_modem_crash(); |
| return -1; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(smsm_check_for_modem_crash); |
| |
| /* the spinlock is used to synchronize between the |
| * irq handler and code that mutates the channel |
| * list or fiddles with channel state |
| */ |
| static DEFINE_SPINLOCK(smd_lock); |
| DEFINE_SPINLOCK(smem_lock); |
| |
| /* the mutex is used during open() and close() |
| * operations to avoid races while creating or |
| * destroying smd_channel structures |
| */ |
| static DEFINE_MUTEX(smd_creation_mutex); |
| |
| static int smd_initialized; |
| |
| struct smd_shared_v1 { |
| struct smd_half_channel ch0; |
| unsigned char data0[SMD_BUF_SIZE]; |
| struct smd_half_channel ch1; |
| unsigned char data1[SMD_BUF_SIZE]; |
| }; |
| |
| struct smd_shared_v2 { |
| struct smd_half_channel ch0; |
| struct smd_half_channel ch1; |
| }; |
| |
| struct smd_shared_v2_word_access { |
| struct smd_half_channel_word_access ch0; |
| struct smd_half_channel_word_access ch1; |
| }; |
| |
| /** |
| * Maps edge type to local and remote processor ID's. |
| */ |
| static struct edge_to_pid edge_to_pids[] = { |
| [SMD_APPS_MODEM] = {SMD_APPS, SMD_MODEM, "modem"}, |
| [SMD_APPS_QDSP] = {SMD_APPS, SMD_Q6, "adsp"}, |
| [SMD_MODEM_QDSP] = {SMD_MODEM, SMD_Q6}, |
| [SMD_APPS_DSPS] = {SMD_APPS, SMD_DSPS, "dsps"}, |
| [SMD_MODEM_DSPS] = {SMD_MODEM, SMD_DSPS}, |
| [SMD_QDSP_DSPS] = {SMD_Q6, SMD_DSPS}, |
| [SMD_APPS_WCNSS] = {SMD_APPS, SMD_WCNSS, "wcnss"}, |
| [SMD_MODEM_WCNSS] = {SMD_MODEM, SMD_WCNSS}, |
| [SMD_QDSP_WCNSS] = {SMD_Q6, SMD_WCNSS}, |
| [SMD_DSPS_WCNSS] = {SMD_DSPS, SMD_WCNSS}, |
| [SMD_APPS_Q6FW] = {SMD_APPS, SMD_MODEM_Q6_FW}, |
| [SMD_MODEM_Q6FW] = {SMD_MODEM, SMD_MODEM_Q6_FW}, |
| [SMD_QDSP_Q6FW] = {SMD_Q6, SMD_MODEM_Q6_FW}, |
| [SMD_DSPS_Q6FW] = {SMD_DSPS, SMD_MODEM_Q6_FW}, |
| [SMD_WCNSS_Q6FW] = {SMD_WCNSS, SMD_MODEM_Q6_FW}, |
| [SMD_APPS_RPM] = {SMD_APPS, SMD_RPM}, |
| [SMD_MODEM_RPM] = {SMD_MODEM, SMD_RPM}, |
| [SMD_QDSP_RPM] = {SMD_Q6, SMD_RPM}, |
| [SMD_WCNSS_RPM] = {SMD_WCNSS, SMD_RPM}, |
| [SMD_TZ_RPM] = {SMD_TZ, SMD_RPM}, |
| }; |
| |
| struct restart_notifier_block { |
| unsigned processor; |
| char *name; |
| struct notifier_block nb; |
| }; |
| |
| int disable_smsm_reset_handshake; |
| static struct platform_device loopback_tty_pdev = {.name = "LOOPBACK_TTY"}; |
| |
| static LIST_HEAD(smd_ch_closed_list); |
| static LIST_HEAD(smd_ch_closing_list); |
| static LIST_HEAD(smd_ch_to_close_list); |
| |
| struct remote_proc_info { |
| unsigned remote_pid; |
| unsigned free_space; |
| struct work_struct probe_work; |
| struct list_head ch_list; |
| /* 2 total supported tables of channels */ |
| unsigned char ch_allocated[SMEM_NUM_SMD_STREAM_CHANNELS * 2]; |
| }; |
| |
| static struct remote_proc_info remote_info[NUM_SMD_SUBSYSTEMS]; |
| |
| static void finalize_channel_close_fn(struct work_struct *work); |
| static DECLARE_WORK(finalize_channel_close_work, finalize_channel_close_fn); |
| static struct workqueue_struct *channel_close_wq; |
| |
| #define PRI_ALLOC_TBL 1 |
| #define SEC_ALLOC_TBL 2 |
| static int smd_alloc_channel(struct smd_alloc_elm *alloc_elm, int table_id, |
| struct remote_proc_info *r_info); |
| |
| static bool smd_edge_inited(int edge) |
| { |
| return edge_to_pids[edge].initialized; |
| } |
| |
| /* on smp systems, the probe might get called from multiple cores, |
| hence use a lock */ |
| static DEFINE_MUTEX(smd_probe_lock); |
| |
| /** |
| * scan_alloc_table - Scans a specified SMD channel allocation table in SMEM for |
| * newly created channels that need to be made locally |
| * visable |
| * |
| * @shared: pointer to the table array in SMEM |
| * @smd_ch_allocated: pointer to an array indicating already allocated channels |
| * @table_id: identifier for this channel allocation table |
| * @num_entries: number of entries in this allocation table |
| * @r_info: pointer to the info structure of the remote proc we care about |
| * |
| * The smd_probe_lock must be locked by the calling function. Shared and |
| * smd_ch_allocated are assumed to be valid pointers. |
| */ |
| static void scan_alloc_table(struct smd_alloc_elm *shared, |
| char *smd_ch_allocated, |
| int table_id, |
| unsigned num_entries, |
| struct remote_proc_info *r_info) |
| { |
| unsigned n; |
| uint32_t type; |
| |
| for (n = 0; n < num_entries; n++) { |
| if (smd_ch_allocated[n]) |
| continue; |
| |
| /* |
| * channel should be allocated only if APPS processor is |
| * involved |
| */ |
| type = SMD_CHANNEL_TYPE(shared[n].type); |
| if (!pid_is_on_edge(type, SMD_APPS) || |
| !pid_is_on_edge(type, r_info->remote_pid)) |
| continue; |
| if (!shared[n].ref_count) |
| continue; |
| if (!shared[n].name[0]) |
| continue; |
| |
| if (!smd_initialized && !smd_edge_inited(type)) { |
| SMD_INFO( |
| "Probe skipping proc %d, tbl %d, ch %d, edge not inited\n", |
| r_info->remote_pid, table_id, n); |
| continue; |
| } |
| |
| if (!smd_alloc_channel(&shared[n], table_id, r_info)) |
| smd_ch_allocated[n] = 1; |
| else |
| SMD_INFO( |
| "Probe skipping proc %d, tbl %d, ch %d, not allocated\n", |
| r_info->remote_pid, table_id, n); |
| } |
| } |
| |
| /** |
| * smd_channel_probe_worker() - Scan for newly created SMD channels and init |
| * local structures so the channels are visable to |
| * local clients |
| * |
| * @work: work_struct corresponding to an instance of this function running on |
| * a workqueue. |
| */ |
| static void smd_channel_probe_worker(struct work_struct *work) |
| { |
| struct smd_alloc_elm *shared; |
| struct remote_proc_info *r_info; |
| unsigned tbl_size; |
| |
| r_info = container_of(work, struct remote_proc_info, probe_work); |
| |
| shared = smem_get_entry_to_proc(ID_CH_ALLOC_TBL, &tbl_size, |
| r_info->remote_pid, 0); |
| |
| if (!shared) { |
| pr_err("%s: allocation table not initialized\n", __func__); |
| return; |
| } |
| |
| mutex_lock(&smd_probe_lock); |
| |
| scan_alloc_table(shared, r_info->ch_allocated, PRI_ALLOC_TBL, |
| tbl_size / sizeof(*shared), |
| r_info); |
| |
| shared = smem_get_entry_to_proc(SMEM_CHANNEL_ALLOC_TBL_2, &tbl_size, |
| r_info->remote_pid, 0); |
| if (shared) |
| scan_alloc_table(shared, |
| &(r_info->ch_allocated[SMEM_NUM_SMD_STREAM_CHANNELS]), |
| SEC_ALLOC_TBL, |
| tbl_size / sizeof(*shared), |
| r_info); |
| |
| mutex_unlock(&smd_probe_lock); |
| } |
| |
| /** |
| * get_remote_ch() - gathers remote channel info |
| * |
| * @shared2: Pointer to v2 shared channel structure |
| * @type: Edge type |
| * @pid: Processor ID of processor on edge |
| * @remote_ch: Channel that belongs to processor @pid |
| * @is_word_access_ch: Bool, is this a word aligned access channel |
| * |
| * @returns: 0 on success, error code on failure |
| */ |
| static int get_remote_ch(void *shared2, |
| uint32_t type, uint32_t pid, |
| void **remote_ch, |
| int is_word_access_ch |
| ) |
| { |
| if (!remote_ch || !shared2 || !pid_is_on_edge(type, pid) || |
| !pid_is_on_edge(type, SMD_APPS)) |
| return -EINVAL; |
| |
| if (is_word_access_ch) |
| *remote_ch = |
| &((struct smd_shared_v2_word_access *)(shared2))->ch1; |
| else |
| *remote_ch = &((struct smd_shared_v2 *)(shared2))->ch1; |
| |
| return 0; |
| } |
| |
| /** |
| * smd_remote_ss_to_edge() - return edge type from remote ss type |
| * @name: remote subsystem name |
| * |
| * Returns the edge type connected between the local subsystem(APPS) |
| * and remote subsystem @name. |
| */ |
| int smd_remote_ss_to_edge(const char *name) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(edge_to_pids); ++i) { |
| if (edge_to_pids[i].subsys_name[0] != 0x0) { |
| if (!strncmp(edge_to_pids[i].subsys_name, name, |
| strlen(name))) |
| return i; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(smd_remote_ss_to_edge); |
| |
| /* |
| * Returns a pointer to the subsystem name or NULL if no |
| * subsystem name is available. |
| * |
| * @type - Edge definition |
| */ |
| const char *smd_edge_to_subsystem(uint32_t type) |
| { |
| const char *subsys = NULL; |
| |
| if (type < ARRAY_SIZE(edge_to_pids)) { |
| subsys = edge_to_pids[type].subsys_name; |
| if (subsys[0] == 0x0) |
| subsys = NULL; |
| } |
| return subsys; |
| } |
| EXPORT_SYMBOL(smd_edge_to_subsystem); |
| |
| /* |
| * Returns a pointer to the subsystem name given the |
| * remote processor ID. |
| * subsystem is not necessarily PIL-loadable |
| * |
| * @pid Remote processor ID |
| * @returns Pointer to subsystem name or NULL if not found |
| */ |
| const char *smd_pid_to_subsystem(uint32_t pid) |
| { |
| const char *subsys = NULL; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(edge_to_pids); ++i) { |
| if (pid == edge_to_pids[i].remote_pid) { |
| if (edge_to_pids[i].subsys_name[0] != 0x0) { |
| subsys = edge_to_pids[i].subsys_name; |
| break; |
| } else if (pid == SMD_RPM) { |
| subsys = "rpm"; |
| break; |
| } |
| } |
| } |
| |
| return subsys; |
| } |
| EXPORT_SYMBOL(smd_pid_to_subsystem); |
| |
| static void smd_reset_edge(void *void_ch, unsigned new_state, |
| int is_word_access_ch) |
| { |
| if (is_word_access_ch) { |
| struct smd_half_channel_word_access *ch = |
| (struct smd_half_channel_word_access *)(void_ch); |
| if (ch->state != SMD_SS_CLOSED) { |
| ch->state = new_state; |
| ch->fDSR = 0; |
| ch->fCTS = 0; |
| ch->fCD = 0; |
| ch->fSTATE = 1; |
| } |
| } else { |
| struct smd_half_channel *ch = |
| (struct smd_half_channel *)(void_ch); |
| if (ch->state != SMD_SS_CLOSED) { |
| ch->state = new_state; |
| ch->fDSR = 0; |
| ch->fCTS = 0; |
| ch->fCD = 0; |
| ch->fSTATE = 1; |
| } |
| } |
| } |
| |
| /** |
| * smd_channel_reset_state() - find channels in an allocation table and set them |
| * to the specified state |
| * |
| * @shared: Pointer to the allocation table to scan |
| * @table_id: ID of the table |
| * @new_state: New state that channels should be set to |
| * @pid: Processor ID of the remote processor for the channels |
| * @num_entries: Number of entries in the table |
| * |
| * Scan the indicated table for channels between Apps and @pid. If a valid |
| * channel is found, set the remote side of the channel to @new_state. |
| */ |
| static void smd_channel_reset_state(struct smd_alloc_elm *shared, int table_id, |
| unsigned new_state, unsigned pid, unsigned num_entries) |
| { |
| unsigned n; |
| void *shared2; |
| uint32_t type; |
| void *remote_ch; |
| int is_word_access; |
| unsigned base_id; |
| |
| switch (table_id) { |
| case PRI_ALLOC_TBL: |
| base_id = SMEM_SMD_BASE_ID; |
| break; |
| case SEC_ALLOC_TBL: |
| base_id = SMEM_SMD_BASE_ID_2; |
| break; |
| default: |
| SMD_INFO("%s: invalid table_id:%d\n", __func__, table_id); |
| return; |
| } |
| |
| for (n = 0; n < num_entries; n++) { |
| if (!shared[n].ref_count) |
| continue; |
| if (!shared[n].name[0]) |
| continue; |
| |
| type = SMD_CHANNEL_TYPE(shared[n].type); |
| is_word_access = is_word_access_ch(type); |
| if (is_word_access) |
| shared2 = smem_find_to_proc(base_id + n, |
| sizeof(struct smd_shared_v2_word_access), pid, |
| 0); |
| else |
| shared2 = smem_find_to_proc(base_id + n, |
| sizeof(struct smd_shared_v2), pid, 0); |
| if (!shared2) |
| continue; |
| |
| if (!get_remote_ch(shared2, type, pid, |
| &remote_ch, is_word_access)) |
| smd_reset_edge(remote_ch, new_state, is_word_access); |
| } |
| } |
| |
| /** |
| * pid_is_on_edge() - checks to see if the processor with id pid is on the |
| * edge specified by edge_num |
| * |
| * @edge_num: the number of the edge which is being tested |
| * @pid: the id of the processor being tested |
| * |
| * @returns: true if on edge, false otherwise |
| */ |
| static bool pid_is_on_edge(uint32_t edge_num, unsigned pid) |
| { |
| struct edge_to_pid edge; |
| |
| if (edge_num >= ARRAY_SIZE(edge_to_pids)) |
| return 0; |
| |
| edge = edge_to_pids[edge_num]; |
| return (edge.local_pid == pid || edge.remote_pid == pid); |
| } |
| |
| void smd_channel_reset(uint32_t restart_pid) |
| { |
| struct smd_alloc_elm *shared_pri; |
| struct smd_alloc_elm *shared_sec; |
| unsigned long flags; |
| unsigned pri_size; |
| unsigned sec_size; |
| |
| SMD_POWER_INFO("%s: starting reset\n", __func__); |
| |
| shared_pri = smem_get_entry_to_proc(ID_CH_ALLOC_TBL, &pri_size, |
| restart_pid, 0); |
| if (!shared_pri) { |
| pr_err("%s: allocation table not initialized\n", __func__); |
| return; |
| } |
| shared_sec = smem_get_entry_to_proc(SMEM_CHANNEL_ALLOC_TBL_2, &sec_size, |
| restart_pid, 0); |
| |
| /* reset SMSM entry */ |
| if (smsm_info.state) { |
| writel_relaxed(0, SMSM_STATE_ADDR(restart_pid)); |
| |
| /* restart SMSM init handshake */ |
| if (restart_pid == SMSM_MODEM) { |
| smsm_change_state(SMSM_APPS_STATE, |
| SMSM_INIT | SMSM_SMD_LOOPBACK | SMSM_RESET, |
| 0); |
| } |
| |
| /* notify SMSM processors */ |
| smsm_irq_handler(0, 0); |
| notify_modem_smsm(); |
| notify_dsp_smsm(); |
| notify_dsps_smsm(); |
| notify_wcnss_smsm(); |
| } |
| |
| /* change all remote states to CLOSING */ |
| mutex_lock(&smd_probe_lock); |
| spin_lock_irqsave(&smd_lock, flags); |
| smd_channel_reset_state(shared_pri, PRI_ALLOC_TBL, SMD_SS_CLOSING, |
| restart_pid, pri_size / sizeof(*shared_pri)); |
| if (shared_sec) |
| smd_channel_reset_state(shared_sec, SEC_ALLOC_TBL, |
| SMD_SS_CLOSING, restart_pid, |
| sec_size / sizeof(*shared_sec)); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| mutex_unlock(&smd_probe_lock); |
| |
| mb(); |
| smd_fake_irq_handler(0); |
| |
| /* change all remote states to CLOSED */ |
| mutex_lock(&smd_probe_lock); |
| spin_lock_irqsave(&smd_lock, flags); |
| smd_channel_reset_state(shared_pri, PRI_ALLOC_TBL, SMD_SS_CLOSED, |
| restart_pid, pri_size / sizeof(*shared_pri)); |
| if (shared_sec) |
| smd_channel_reset_state(shared_sec, SEC_ALLOC_TBL, |
| SMD_SS_CLOSED, restart_pid, |
| sec_size / sizeof(*shared_sec)); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| mutex_unlock(&smd_probe_lock); |
| |
| mb(); |
| smd_fake_irq_handler(0); |
| |
| SMD_POWER_INFO("%s: finished reset\n", __func__); |
| } |
| |
| /* how many bytes are available for reading */ |
| static int smd_stream_read_avail(struct smd_channel *ch) |
| { |
| return (ch->half_ch->get_head(ch->recv) - |
| ch->half_ch->get_tail(ch->recv)) & ch->fifo_mask; |
| } |
| |
| /* how many bytes we are free to write */ |
| static int smd_stream_write_avail(struct smd_channel *ch) |
| { |
| int bytes_avail; |
| |
| bytes_avail = ch->fifo_mask - ((ch->half_ch->get_head(ch->send) - |
| ch->half_ch->get_tail(ch->send)) & ch->fifo_mask) + 1; |
| |
| if (bytes_avail < SMD_FIFO_FULL_RESERVE) |
| bytes_avail = 0; |
| else |
| bytes_avail -= SMD_FIFO_FULL_RESERVE; |
| return bytes_avail; |
| } |
| |
| static int smd_packet_read_avail(struct smd_channel *ch) |
| { |
| if (ch->current_packet) { |
| int n = smd_stream_read_avail(ch); |
| if (n > ch->current_packet) |
| n = ch->current_packet; |
| return n; |
| } else { |
| return 0; |
| } |
| } |
| |
| static int smd_packet_write_avail(struct smd_channel *ch) |
| { |
| int n = smd_stream_write_avail(ch); |
| return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0; |
| } |
| |
| static int ch_is_open(struct smd_channel *ch) |
| { |
| return (ch->half_ch->get_state(ch->recv) == SMD_SS_OPENED || |
| ch->half_ch->get_state(ch->recv) == SMD_SS_FLUSHING) |
| && (ch->half_ch->get_state(ch->send) == SMD_SS_OPENED); |
| } |
| |
| /* provide a pointer and length to readable data in the fifo */ |
| static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr) |
| { |
| unsigned head = ch->half_ch->get_head(ch->recv); |
| unsigned tail = ch->half_ch->get_tail(ch->recv); |
| *ptr = (void *) (ch->recv_data + tail); |
| |
| if (tail <= head) |
| return head - tail; |
| else |
| return ch->fifo_size - tail; |
| } |
| |
| static int read_intr_blocked(struct smd_channel *ch) |
| { |
| return ch->half_ch->get_fBLOCKREADINTR(ch->recv); |
| } |
| |
| /* advance the fifo read pointer after data from ch_read_buffer is consumed */ |
| static void ch_read_done(struct smd_channel *ch, unsigned count) |
| { |
| BUG_ON(count > smd_stream_read_avail(ch)); |
| ch->half_ch->set_tail(ch->recv, |
| (ch->half_ch->get_tail(ch->recv) + count) & ch->fifo_mask); |
| wmb(); |
| ch->half_ch->set_fTAIL(ch->send, 1); |
| } |
| |
| /* basic read interface to ch_read_{buffer,done} used |
| * by smd_*_read() and update_packet_state() |
| * will read-and-discard if the _data pointer is null |
| */ |
| static int ch_read(struct smd_channel *ch, void *_data, int len, int user_buf) |
| { |
| void *ptr; |
| unsigned n; |
| unsigned char *data = _data; |
| int orig_len = len; |
| int r = 0; |
| |
| while (len > 0) { |
| n = ch_read_buffer(ch, &ptr); |
| if (n == 0) |
| break; |
| |
| if (n > len) |
| n = len; |
| if (_data) { |
| if (user_buf) { |
| r = copy_to_user(data, ptr, n); |
| if (r > 0) { |
| pr_err("%s: " |
| "copy_to_user could not copy " |
| "%i bytes.\n", |
| __func__, |
| r); |
| } |
| } else |
| memcpy(data, ptr, n); |
| } |
| |
| data += n; |
| len -= n; |
| ch_read_done(ch, n); |
| } |
| |
| return orig_len - len; |
| } |
| |
| static void update_stream_state(struct smd_channel *ch) |
| { |
| /* streams have no special state requiring updating */ |
| } |
| |
| static void update_packet_state(struct smd_channel *ch) |
| { |
| unsigned hdr[5]; |
| int r; |
| |
| /* can't do anything if we're in the middle of a packet */ |
| while (ch->current_packet == 0) { |
| /* discard 0 length packets if any */ |
| |
| /* don't bother unless we can get the full header */ |
| if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE) |
| return; |
| |
| r = ch_read(ch, hdr, SMD_HEADER_SIZE, 0); |
| BUG_ON(r != SMD_HEADER_SIZE); |
| |
| ch->current_packet = hdr[0]; |
| } |
| } |
| |
| /** |
| * ch_write_buffer() - Provide a pointer and length for the next segment of |
| * free space in the FIFO. |
| * @ch: channel |
| * @ptr: Address to pointer for the next segment write |
| * @returns: Maximum size that can be written until the FIFO is either full |
| * or the end of the FIFO has been reached. |
| * |
| * The returned pointer and length are passed to memcpy, so the next segment is |
| * defined as either the space available between the read index (tail) and the |
| * write index (head) or the space available to the end of the FIFO. |
| */ |
| static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr) |
| { |
| unsigned head = ch->half_ch->get_head(ch->send); |
| unsigned tail = ch->half_ch->get_tail(ch->send); |
| *ptr = (void *) (ch->send_data + head); |
| |
| if (head < tail) { |
| return tail - head - SMD_FIFO_FULL_RESERVE; |
| } else { |
| if (tail < SMD_FIFO_FULL_RESERVE) |
| return ch->fifo_size + tail - head |
| - SMD_FIFO_FULL_RESERVE; |
| else |
| return ch->fifo_size - head; |
| } |
| } |
| |
| /* advace the fifo write pointer after freespace |
| * from ch_write_buffer is filled |
| */ |
| static void ch_write_done(struct smd_channel *ch, unsigned count) |
| { |
| BUG_ON(count > smd_stream_write_avail(ch)); |
| ch->half_ch->set_head(ch->send, |
| (ch->half_ch->get_head(ch->send) + count) & ch->fifo_mask); |
| wmb(); |
| ch->half_ch->set_fHEAD(ch->send, 1); |
| } |
| |
| static void ch_set_state(struct smd_channel *ch, unsigned n) |
| { |
| if (n == SMD_SS_OPENED) { |
| ch->half_ch->set_fDSR(ch->send, 1); |
| ch->half_ch->set_fCTS(ch->send, 1); |
| ch->half_ch->set_fCD(ch->send, 1); |
| } else { |
| ch->half_ch->set_fDSR(ch->send, 0); |
| ch->half_ch->set_fCTS(ch->send, 0); |
| ch->half_ch->set_fCD(ch->send, 0); |
| } |
| ch->half_ch->set_state(ch->send, n); |
| ch->half_ch->set_fSTATE(ch->send, 1); |
| ch->notify_other_cpu(ch); |
| } |
| |
| /** |
| * do_smd_probe() - Look for newly created SMD channels a specific processor |
| * |
| * @remote_pid: remote processor id of the proc that may have created channels |
| */ |
| static void do_smd_probe(unsigned remote_pid) |
| { |
| unsigned free_space; |
| |
| free_space = smem_get_free_space(remote_pid); |
| if (free_space != remote_info[remote_pid].free_space) { |
| remote_info[remote_pid].free_space = free_space; |
| schedule_work(&remote_info[remote_pid].probe_work); |
| } |
| } |
| |
| /** |
| * do_smd_probe() - Look for newly created SMD channels from any remote proc |
| */ |
| static void do_smd_probe_all(void) |
| { |
| int i; |
| |
| for (i = 1; i < NUM_SMD_SUBSYSTEMS; ++i) |
| do_smd_probe(i); |
| } |
| |
| static void smd_state_change(struct smd_channel *ch, |
| unsigned last, unsigned next) |
| { |
| ch->last_state = next; |
| |
| SMD_INFO("SMD: ch %d %d -> %d\n", ch->n, last, next); |
| |
| switch (next) { |
| case SMD_SS_OPENING: |
| if (ch->half_ch->get_state(ch->send) == SMD_SS_CLOSING || |
| ch->half_ch->get_state(ch->send) == SMD_SS_CLOSED) { |
| ch->half_ch->set_tail(ch->recv, 0); |
| ch->half_ch->set_head(ch->send, 0); |
| ch->half_ch->set_fBLOCKREADINTR(ch->send, 0); |
| ch_set_state(ch, SMD_SS_OPENING); |
| } |
| break; |
| case SMD_SS_OPENED: |
| if (ch->half_ch->get_state(ch->send) == SMD_SS_OPENING) { |
| ch_set_state(ch, SMD_SS_OPENED); |
| ch->notify(ch->priv, SMD_EVENT_OPEN); |
| } |
| break; |
| case SMD_SS_FLUSHING: |
| case SMD_SS_RESET: |
| /* we should force them to close? */ |
| break; |
| case SMD_SS_CLOSED: |
| if (ch->half_ch->get_state(ch->send) == SMD_SS_OPENED) { |
| ch_set_state(ch, SMD_SS_CLOSING); |
| ch->current_packet = 0; |
| ch->pending_pkt_sz = 0; |
| ch->notify(ch->priv, SMD_EVENT_CLOSE); |
| } |
| break; |
| case SMD_SS_CLOSING: |
| if (ch->half_ch->get_state(ch->send) == SMD_SS_CLOSED) { |
| list_move(&ch->ch_list, |
| &smd_ch_to_close_list); |
| queue_work(channel_close_wq, |
| &finalize_channel_close_work); |
| } |
| break; |
| } |
| } |
| |
| static void handle_smd_irq_closing_list(void) |
| { |
| unsigned long flags; |
| struct smd_channel *ch; |
| struct smd_channel *index; |
| unsigned tmp; |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry_safe(ch, index, &smd_ch_closing_list, ch_list) { |
| if (ch->half_ch->get_fSTATE(ch->recv)) |
| ch->half_ch->set_fSTATE(ch->recv, 0); |
| tmp = ch->half_ch->get_state(ch->recv); |
| if (tmp != ch->last_state) |
| smd_state_change(ch, ch->last_state, tmp); |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| } |
| |
| static void handle_smd_irq(struct remote_proc_info *r_info, |
| void (*notify)(smd_channel_t *ch)) |
| { |
| unsigned long flags; |
| struct smd_channel *ch; |
| unsigned ch_flags; |
| unsigned tmp; |
| unsigned char state_change; |
| struct list_head *list; |
| |
| list = &r_info->ch_list; |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry(ch, list, ch_list) { |
| state_change = 0; |
| ch_flags = 0; |
| if (ch_is_open(ch)) { |
| if (ch->half_ch->get_fHEAD(ch->recv)) { |
| ch->half_ch->set_fHEAD(ch->recv, 0); |
| ch_flags |= 1; |
| } |
| if (ch->half_ch->get_fTAIL(ch->recv)) { |
| ch->half_ch->set_fTAIL(ch->recv, 0); |
| ch_flags |= 2; |
| } |
| if (ch->half_ch->get_fSTATE(ch->recv)) { |
| ch->half_ch->set_fSTATE(ch->recv, 0); |
| ch_flags |= 4; |
| } |
| } |
| tmp = ch->half_ch->get_state(ch->recv); |
| if (tmp != ch->last_state) { |
| SMD_POWER_INFO("SMD ch%d '%s' State change %d->%d\n", |
| ch->n, ch->name, ch->last_state, tmp); |
| smd_state_change(ch, ch->last_state, tmp); |
| state_change = 1; |
| } |
| if (ch_flags & 0x3) { |
| ch->update_state(ch); |
| SMD_POWER_INFO( |
| "SMD ch%d '%s' Data event 0x%x tx%d/rx%d %dr/%dw : %dr/%dw\n", |
| ch->n, ch->name, |
| ch_flags, |
| ch->fifo_size - |
| (smd_stream_write_avail(ch) + 1), |
| smd_stream_read_avail(ch), |
| ch->half_ch->get_tail(ch->send), |
| ch->half_ch->get_head(ch->send), |
| ch->half_ch->get_tail(ch->recv), |
| ch->half_ch->get_head(ch->recv) |
| ); |
| ch->notify(ch->priv, SMD_EVENT_DATA); |
| } |
| if (ch_flags & 0x4 && !state_change) { |
| SMD_POWER_INFO("SMD ch%d '%s' State update\n", |
| ch->n, ch->name); |
| ch->notify(ch->priv, SMD_EVENT_STATUS); |
| } |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| do_smd_probe(r_info->remote_pid); |
| } |
| |
| static inline void log_irq(uint32_t subsystem) |
| { |
| const char *subsys = smd_edge_to_subsystem(subsystem); |
| |
| (void) subsys; |
| |
| SMD_POWER_INFO("SMD Int %s->Apps\n", subsys); |
| } |
| |
| irqreturn_t smd_modem_irq_handler(int irq, void *data) |
| { |
| log_irq(SMD_APPS_MODEM); |
| ++interrupt_stats[SMD_MODEM].smd_in_count; |
| handle_smd_irq(&remote_info[SMD_MODEM], notify_modem_smd); |
| handle_smd_irq_closing_list(); |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t smd_dsp_irq_handler(int irq, void *data) |
| { |
| log_irq(SMD_APPS_QDSP); |
| ++interrupt_stats[SMD_Q6].smd_in_count; |
| handle_smd_irq(&remote_info[SMD_Q6], notify_dsp_smd); |
| handle_smd_irq_closing_list(); |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t smd_dsps_irq_handler(int irq, void *data) |
| { |
| log_irq(SMD_APPS_DSPS); |
| ++interrupt_stats[SMD_DSPS].smd_in_count; |
| handle_smd_irq(&remote_info[SMD_DSPS], notify_dsps_smd); |
| handle_smd_irq_closing_list(); |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t smd_wcnss_irq_handler(int irq, void *data) |
| { |
| log_irq(SMD_APPS_WCNSS); |
| ++interrupt_stats[SMD_WCNSS].smd_in_count; |
| handle_smd_irq(&remote_info[SMD_WCNSS], notify_wcnss_smd); |
| handle_smd_irq_closing_list(); |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t smd_rpm_irq_handler(int irq, void *data) |
| { |
| log_irq(SMD_APPS_RPM); |
| ++interrupt_stats[SMD_RPM].smd_in_count; |
| handle_smd_irq(&remote_info[SMD_RPM], notify_rpm_smd); |
| handle_smd_irq_closing_list(); |
| return IRQ_HANDLED; |
| } |
| |
| static void smd_fake_irq_handler(unsigned long arg) |
| { |
| handle_smd_irq(&remote_info[SMD_MODEM], notify_modem_smd); |
| handle_smd_irq(&remote_info[SMD_Q6], notify_dsp_smd); |
| handle_smd_irq(&remote_info[SMD_DSPS], notify_dsps_smd); |
| handle_smd_irq(&remote_info[SMD_WCNSS], notify_wcnss_smd); |
| handle_smd_irq(&remote_info[SMD_RPM], notify_rpm_smd); |
| handle_smd_irq_closing_list(); |
| } |
| |
| static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0); |
| |
| static inline int smd_need_int(struct smd_channel *ch) |
| { |
| if (ch_is_open(ch)) { |
| if (ch->half_ch->get_fHEAD(ch->recv) || |
| ch->half_ch->get_fTAIL(ch->recv) || |
| ch->half_ch->get_fSTATE(ch->recv)) |
| return 1; |
| if (ch->half_ch->get_state(ch->recv) != ch->last_state) |
| return 1; |
| } |
| return 0; |
| } |
| |
| void smd_sleep_exit(void) |
| { |
| unsigned long flags; |
| struct smd_channel *ch; |
| int need_int = 0; |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry(ch, &remote_info[SMD_MODEM].ch_list, ch_list) { |
| if (smd_need_int(ch)) { |
| need_int = 1; |
| break; |
| } |
| } |
| list_for_each_entry(ch, &remote_info[SMD_Q6].ch_list, ch_list) { |
| if (smd_need_int(ch)) { |
| need_int = 1; |
| break; |
| } |
| } |
| list_for_each_entry(ch, &remote_info[SMD_DSPS].ch_list, ch_list) { |
| if (smd_need_int(ch)) { |
| need_int = 1; |
| break; |
| } |
| } |
| list_for_each_entry(ch, &remote_info[SMD_WCNSS].ch_list, ch_list) { |
| if (smd_need_int(ch)) { |
| need_int = 1; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| do_smd_probe_all(); |
| |
| if (need_int) { |
| SMD_DBG("smd_sleep_exit need interrupt\n"); |
| tasklet_schedule(&smd_fake_irq_tasklet); |
| } |
| } |
| EXPORT_SYMBOL(smd_sleep_exit); |
| |
| static int smd_is_packet(struct smd_alloc_elm *alloc_elm) |
| { |
| if (SMD_XFER_TYPE(alloc_elm->type) == 1) |
| return 0; |
| else if (SMD_XFER_TYPE(alloc_elm->type) == 2) |
| return 1; |
| |
| /* for cases where xfer type is 0 */ |
| if (!strncmp(alloc_elm->name, "DAL", 3)) |
| return 0; |
| |
| /* for cases where xfer type is 0 */ |
| if (!strncmp(alloc_elm->name, "RPCCALL_QDSP", 12)) |
| return 0; |
| |
| if (alloc_elm->cid > 4 || alloc_elm->cid == 1) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static int smd_stream_write(smd_channel_t *ch, const void *_data, int len, |
| int user_buf) |
| { |
| void *ptr; |
| const unsigned char *buf = _data; |
| unsigned xfer; |
| int orig_len = len; |
| int r = 0; |
| |
| SMD_DBG("smd_stream_write() %d -> ch%d\n", len, ch->n); |
| if (len < 0) |
| return -EINVAL; |
| else if (len == 0) |
| return 0; |
| |
| while ((xfer = ch_write_buffer(ch, &ptr)) != 0) { |
| if (!ch_is_open(ch)) { |
| len = orig_len; |
| break; |
| } |
| if (xfer > len) |
| xfer = len; |
| if (user_buf) { |
| r = copy_from_user(ptr, buf, xfer); |
| if (r > 0) { |
| pr_err("%s: " |
| "copy_from_user could not copy %i " |
| "bytes.\n", |
| __func__, |
| r); |
| } |
| } else |
| memcpy(ptr, buf, xfer); |
| ch_write_done(ch, xfer); |
| len -= xfer; |
| buf += xfer; |
| if (len == 0) |
| break; |
| } |
| |
| if (orig_len - len) |
| ch->notify_other_cpu(ch); |
| |
| return orig_len - len; |
| } |
| |
| static int smd_packet_write(smd_channel_t *ch, const void *_data, int len, |
| int user_buf) |
| { |
| int ret; |
| unsigned hdr[5]; |
| |
| SMD_DBG("smd_packet_write() %d -> ch%d\n", len, ch->n); |
| if (len < 0) |
| return -EINVAL; |
| else if (len == 0) |
| return 0; |
| |
| if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE)) |
| return -ENOMEM; |
| |
| hdr[0] = len; |
| hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0; |
| |
| |
| ret = smd_stream_write(ch, hdr, sizeof(hdr), 0); |
| if (ret < 0 || ret != sizeof(hdr)) { |
| SMD_DBG("%s failed to write pkt header: " |
| "%d returned\n", __func__, ret); |
| return -1; |
| } |
| |
| |
| ret = smd_stream_write(ch, _data, len, user_buf); |
| if (ret < 0 || ret != len) { |
| SMD_DBG("%s failed to write pkt data: " |
| "%d returned\n", __func__, ret); |
| return ret; |
| } |
| |
| return len; |
| } |
| |
| static int smd_stream_read(smd_channel_t *ch, void *data, int len, int user_buf) |
| { |
| int r; |
| |
| if (len < 0) |
| return -EINVAL; |
| |
| r = ch_read(ch, data, len, user_buf); |
| if (r > 0) |
| if (!read_intr_blocked(ch)) |
| ch->notify_other_cpu(ch); |
| |
| return r; |
| } |
| |
| static int smd_packet_read(smd_channel_t *ch, void *data, int len, int user_buf) |
| { |
| unsigned long flags; |
| int r; |
| |
| if (len < 0) |
| return -EINVAL; |
| |
| if (len > ch->current_packet) |
| len = ch->current_packet; |
| |
| r = ch_read(ch, data, len, user_buf); |
| if (r > 0) |
| if (!read_intr_blocked(ch)) |
| ch->notify_other_cpu(ch); |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| ch->current_packet -= r; |
| update_packet_state(ch); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| |
| return r; |
| } |
| |
| static int smd_packet_read_from_cb(smd_channel_t *ch, void *data, int len, |
| int user_buf) |
| { |
| int r; |
| |
| if (len < 0) |
| return -EINVAL; |
| |
| if (len > ch->current_packet) |
| len = ch->current_packet; |
| |
| r = ch_read(ch, data, len, user_buf); |
| if (r > 0) |
| if (!read_intr_blocked(ch)) |
| ch->notify_other_cpu(ch); |
| |
| ch->current_packet -= r; |
| update_packet_state(ch); |
| |
| return r; |
| } |
| |
| #if (defined(CONFIG_MSM_SMD_PKG4) || defined(CONFIG_MSM_SMD_PKG3)) |
| /** |
| * smd_alloc_v2() - Init local channel structure with information stored in SMEM |
| * |
| * @ch: pointer to the local structure for this channel |
| * @table_id: the id of the table this channel resides in. 1 = first table, 2 = |
| * second table, etc |
| * @r_info: pointer to the info structure of the remote proc for this channel |
| * @returns: -EINVAL for failure; 0 for success |
| * |
| * ch must point to an allocated instance of struct smd_channel that is zeroed |
| * out, and has the n and type members already initialized to the correct values |
| */ |
| static int smd_alloc_v2(struct smd_channel *ch, int table_id, |
| struct remote_proc_info *r_info) |
| { |
| void *buffer; |
| unsigned buffer_sz; |
| unsigned base_id; |
| unsigned fifo_id; |
| |
| switch (table_id) { |
| case PRI_ALLOC_TBL: |
| base_id = SMEM_SMD_BASE_ID; |
| fifo_id = SMEM_SMD_FIFO_BASE_ID; |
| break; |
| case SEC_ALLOC_TBL: |
| base_id = SMEM_SMD_BASE_ID_2; |
| fifo_id = SMEM_SMD_FIFO_BASE_ID_2; |
| break; |
| default: |
| SMD_INFO("Invalid table_id:%d passed to smd_alloc\n", table_id); |
| return -EINVAL; |
| } |
| |
| if (is_word_access_ch(ch->type)) { |
| struct smd_shared_v2_word_access *shared2; |
| shared2 = smem_alloc_to_proc(base_id + ch->n, sizeof(*shared2), |
| r_info->remote_pid, 0); |
| if (!shared2) { |
| SMD_INFO("smem_alloc failed ch=%d\n", ch->n); |
| return -EINVAL; |
| } |
| ch->send = &shared2->ch0; |
| ch->recv = &shared2->ch1; |
| } else { |
| struct smd_shared_v2 *shared2; |
| shared2 = smem_alloc_to_proc(base_id + ch->n, sizeof(*shared2), |
| r_info->remote_pid, 0); |
| if (!shared2) { |
| SMD_INFO("smem_alloc failed ch=%d\n", ch->n); |
| return -EINVAL; |
| } |
| ch->send = &shared2->ch0; |
| ch->recv = &shared2->ch1; |
| } |
| ch->half_ch = get_half_ch_funcs(ch->type); |
| |
| buffer = smem_get_entry_to_proc(fifo_id + ch->n, &buffer_sz, |
| r_info->remote_pid, 0); |
| if (!buffer) { |
| SMD_INFO("smem_get_entry failed\n"); |
| return -EINVAL; |
| } |
| |
| /* buffer must be a power-of-two size */ |
| if (buffer_sz & (buffer_sz - 1)) { |
| SMD_INFO("Buffer size: %u not power of two\n", buffer_sz); |
| return -EINVAL; |
| } |
| buffer_sz /= 2; |
| ch->send_data = buffer; |
| ch->recv_data = buffer + buffer_sz; |
| ch->fifo_size = buffer_sz; |
| |
| return 0; |
| } |
| |
| static int smd_alloc_v1(struct smd_channel *ch) |
| { |
| return -EINVAL; |
| } |
| |
| #else /* define v1 for older targets */ |
| static int smd_alloc_v2(struct smd_channel *ch, int table_id, |
| struct remote_proc_info *r_info) |
| { |
| return -EINVAL; |
| } |
| |
| static int smd_alloc_v1(struct smd_channel *ch) |
| { |
| struct smd_shared_v1 *shared1; |
| shared1 = smem_alloc_to_proc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1), |
| 0, SMEM_ANY_HOST_FLAG); |
| if (!shared1) { |
| pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n); |
| return -EINVAL; |
| } |
| ch->send = &shared1->ch0; |
| ch->recv = &shared1->ch1; |
| ch->send_data = shared1->data0; |
| ch->recv_data = shared1->data1; |
| ch->fifo_size = SMD_BUF_SIZE; |
| ch->half_ch = get_half_ch_funcs(ch->type); |
| return 0; |
| } |
| |
| #endif |
| |
| /** |
| * smd_alloc_channel() - Create and init local structures for a newly allocated |
| * SMD channel |
| * |
| * @alloc_elm: the allocation element stored in SMEM for this channel |
| * @table_id: the id of the table this channel resides in. 1 = first table, 2 = |
| * seconds table, etc |
| * @r_info: pointer to the info structure of the remote proc for this channel |
| * @returns: -1 for failure; 0 for success |
| */ |
| static int smd_alloc_channel(struct smd_alloc_elm *alloc_elm, int table_id, |
| struct remote_proc_info *r_info) |
| { |
| struct smd_channel *ch; |
| |
| ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL); |
| if (ch == 0) { |
| pr_err("smd_alloc_channel() out of memory\n"); |
| return -1; |
| } |
| ch->n = alloc_elm->cid; |
| ch->type = SMD_CHANNEL_TYPE(alloc_elm->type); |
| |
| if (smd_alloc_v2(ch, table_id, r_info) && smd_alloc_v1(ch)) { |
| kfree(ch); |
| return -1; |
| } |
| |
| ch->fifo_mask = ch->fifo_size - 1; |
| |
| /* probe_worker guarentees ch->type will be a valid type */ |
| if (ch->type == SMD_APPS_MODEM) |
| ch->notify_other_cpu = notify_modem_smd; |
| else if (ch->type == SMD_APPS_QDSP) |
| ch->notify_other_cpu = notify_dsp_smd; |
| else if (ch->type == SMD_APPS_DSPS) |
| ch->notify_other_cpu = notify_dsps_smd; |
| else if (ch->type == SMD_APPS_WCNSS) |
| ch->notify_other_cpu = notify_wcnss_smd; |
| else if (ch->type == SMD_APPS_RPM) |
| ch->notify_other_cpu = notify_rpm_smd; |
| |
| if (smd_is_packet(alloc_elm)) { |
| ch->read = smd_packet_read; |
| ch->write = smd_packet_write; |
| ch->read_avail = smd_packet_read_avail; |
| ch->write_avail = smd_packet_write_avail; |
| ch->update_state = update_packet_state; |
| ch->read_from_cb = smd_packet_read_from_cb; |
| ch->is_pkt_ch = 1; |
| } else { |
| ch->read = smd_stream_read; |
| ch->write = smd_stream_write; |
| ch->read_avail = smd_stream_read_avail; |
| ch->write_avail = smd_stream_write_avail; |
| ch->update_state = update_stream_state; |
| ch->read_from_cb = smd_stream_read; |
| } |
| |
| memcpy(ch->name, alloc_elm->name, SMD_MAX_CH_NAME_LEN); |
| ch->name[SMD_MAX_CH_NAME_LEN-1] = 0; |
| |
| ch->pdev.name = ch->name; |
| ch->pdev.id = ch->type; |
| |
| SMD_INFO("smd_alloc_channel() '%s' cid=%d\n", |
| ch->name, ch->n); |
| |
| mutex_lock(&smd_creation_mutex); |
| list_add(&ch->ch_list, &smd_ch_closed_list); |
| mutex_unlock(&smd_creation_mutex); |
| |
| platform_device_register(&ch->pdev); |
| if (!strncmp(ch->name, "LOOPBACK", 8) && ch->type == SMD_APPS_MODEM) { |
| /* create a platform driver to be used by smd_tty driver |
| * so that it can access the loopback port |
| */ |
| loopback_tty_pdev.id = ch->type; |
| platform_device_register(&loopback_tty_pdev); |
| } |
| return 0; |
| } |
| |
| static inline void notify_loopback_smd(smd_channel_t *ch_notif) |
| { |
| unsigned long flags; |
| struct smd_channel *ch; |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry(ch, &smd_ch_list_loopback, ch_list) { |
| ch->notify(ch->priv, SMD_EVENT_DATA); |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| } |
| |
| static int smd_alloc_loopback_channel(void) |
| { |
| static struct smd_half_channel smd_loopback_ctl; |
| static char smd_loopback_data[SMD_BUF_SIZE]; |
| struct smd_channel *ch; |
| |
| ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL); |
| if (ch == 0) { |
| pr_err("%s: out of memory\n", __func__); |
| return -1; |
| } |
| ch->n = SMD_LOOPBACK_CID; |
| |
| ch->send = &smd_loopback_ctl; |
| ch->recv = &smd_loopback_ctl; |
| ch->send_data = smd_loopback_data; |
| ch->recv_data = smd_loopback_data; |
| ch->fifo_size = SMD_BUF_SIZE; |
| |
| ch->fifo_mask = ch->fifo_size - 1; |
| ch->type = SMD_LOOPBACK_TYPE; |
| ch->notify_other_cpu = notify_loopback_smd; |
| |
| ch->read = smd_stream_read; |
| ch->write = smd_stream_write; |
| ch->read_avail = smd_stream_read_avail; |
| ch->write_avail = smd_stream_write_avail; |
| ch->update_state = update_stream_state; |
| ch->read_from_cb = smd_stream_read; |
| |
| memset(ch->name, 0, 20); |
| memcpy(ch->name, "local_loopback", 14); |
| |
| ch->pdev.name = ch->name; |
| ch->pdev.id = ch->type; |
| |
| SMD_INFO("%s: '%s' cid=%d\n", __func__, ch->name, ch->n); |
| |
| mutex_lock(&smd_creation_mutex); |
| list_add(&ch->ch_list, &smd_ch_closed_list); |
| mutex_unlock(&smd_creation_mutex); |
| |
| platform_device_register(&ch->pdev); |
| return 0; |
| } |
| |
| static void do_nothing_notify(void *priv, unsigned flags) |
| { |
| } |
| |
| static void finalize_channel_close_fn(struct work_struct *work) |
| { |
| unsigned long flags; |
| struct smd_channel *ch; |
| struct smd_channel *index; |
| |
| mutex_lock(&smd_creation_mutex); |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry_safe(ch, index, &smd_ch_to_close_list, ch_list) { |
| list_del(&ch->ch_list); |
| list_add(&ch->ch_list, &smd_ch_closed_list); |
| ch->notify(ch->priv, SMD_EVENT_REOPEN_READY); |
| ch->notify = do_nothing_notify; |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| mutex_unlock(&smd_creation_mutex); |
| } |
| |
| struct smd_channel *smd_get_channel(const char *name, uint32_t type) |
| { |
| struct smd_channel *ch; |
| |
| mutex_lock(&smd_creation_mutex); |
| list_for_each_entry(ch, &smd_ch_closed_list, ch_list) { |
| if (!strcmp(name, ch->name) && |
| (type == ch->type)) { |
| list_del(&ch->ch_list); |
| mutex_unlock(&smd_creation_mutex); |
| return ch; |
| } |
| } |
| mutex_unlock(&smd_creation_mutex); |
| |
| return NULL; |
| } |
| |
| int smd_named_open_on_edge(const char *name, uint32_t edge, |
| smd_channel_t **_ch, |
| void *priv, void (*notify)(void *, unsigned)) |
| { |
| struct smd_channel *ch; |
| unsigned long flags; |
| |
| if (smd_initialized == 0 && !smd_edge_inited(edge)) { |
| SMD_INFO("smd_open() before smd_init()\n"); |
| return -ENODEV; |
| } |
| |
| SMD_DBG("smd_open('%s', %p, %p)\n", name, priv, notify); |
| |
| ch = smd_get_channel(name, edge); |
| if (!ch) { |
| /* check closing list for port */ |
| spin_lock_irqsave(&smd_lock, flags); |
| list_for_each_entry(ch, &smd_ch_closing_list, ch_list) { |
| if (!strncmp(name, ch->name, 20) && |
| (edge == ch->type)) { |
| /* channel exists, but is being closed */ |
| spin_unlock_irqrestore(&smd_lock, flags); |
| return -EAGAIN; |
| } |
| } |
| |
| /* check closing workqueue list for port */ |
| list_for_each_entry(ch, &smd_ch_to_close_list, ch_list) { |
| if (!strncmp(name, ch->name, 20) && |
| (edge == ch->type)) { |
| /* channel exists, but is being closed */ |
| spin_unlock_irqrestore(&smd_lock, flags); |
| return -EAGAIN; |
| } |
| } |
| spin_unlock_irqrestore(&smd_lock, flags); |
| |
| /* one final check to handle closing->closed race condition */ |
| ch = smd_get_channel(name, edge); |
| if (!ch) |
| return -ENODEV; |
| } |
| |
| if (notify == 0) |
| notify = do_nothing_notify; |
| |
| ch->notify = notify; |
| ch->current_packet = 0; |
| ch->last_state = SMD_SS_CLOSED; |
| ch->priv = priv; |
| |
| if (edge == SMD_LOOPBACK_TYPE) { |
| ch->last_state = SMD_SS_OPENED; |
| ch->half_ch->set_state(ch->send, SMD_SS_OPENED); |
| ch->half_ch->set_fDSR(ch->send, 1); |
| ch->half_ch->set_fCTS(ch->send, 1); |
| ch->half_ch->set_fCD(ch->send, 1); |
| } |
| |
| *_ch = ch; |
| |
| SMD_DBG("smd_open: opening '%s'\n", ch->name); |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| if (unlikely(ch->type == SMD_LOOPBACK_TYPE)) |
| list_add(&ch->ch_list, &smd_ch_list_loopback); |
| else |
| list_add(&ch->ch_list, |
| &remote_info[edge_to_pids[ch->type].remote_pid].ch_list); |
| |
| SMD_DBG("%s: opening ch %d\n", __func__, ch->n); |
| |
| if (edge != SMD_LOOPBACK_TYPE) |
| smd_state_change(ch, ch->last_state, SMD_SS_OPENING); |
| |
| spin_unlock_irqrestore(&smd_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_named_open_on_edge); |
| |
| |
| int smd_open(const char *name, smd_channel_t **_ch, |
| void *priv, void (*notify)(void *, unsigned)) |
| { |
| return smd_named_open_on_edge(name, SMD_APPS_MODEM, _ch, priv, |
| notify); |
| } |
| EXPORT_SYMBOL(smd_open); |
| |
| int smd_close(smd_channel_t *ch) |
| { |
| unsigned long flags; |
| |
| if (ch == 0) |
| return -1; |
| |
| SMD_INFO("smd_close(%s)\n", ch->name); |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| list_del(&ch->ch_list); |
| if (ch->n == SMD_LOOPBACK_CID) { |
| ch->half_ch->set_fDSR(ch->send, 0); |
| ch->half_ch->set_fCTS(ch->send, 0); |
| ch->half_ch->set_fCD(ch->send, 0); |
| ch->half_ch->set_state(ch->send, SMD_SS_CLOSED); |
| } else |
| ch_set_state(ch, SMD_SS_CLOSED); |
| |
| if (ch->half_ch->get_state(ch->recv) == SMD_SS_OPENED) { |
| list_add(&ch->ch_list, &smd_ch_closing_list); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| } else { |
| spin_unlock_irqrestore(&smd_lock, flags); |
| ch->notify = do_nothing_notify; |
| mutex_lock(&smd_creation_mutex); |
| list_add(&ch->ch_list, &smd_ch_closed_list); |
| mutex_unlock(&smd_creation_mutex); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_close); |
| |
| int smd_write_start(smd_channel_t *ch, int len) |
| { |
| int ret; |
| unsigned hdr[5]; |
| |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| if (!ch->is_pkt_ch) { |
| pr_err("%s: non-packet channel specified\n", __func__); |
| return -EACCES; |
| } |
| if (len < 1) { |
| pr_err("%s: invalid length: %d\n", __func__, len); |
| return -EINVAL; |
| } |
| |
| if (ch->pending_pkt_sz) { |
| pr_err("%s: packet of size: %d in progress\n", __func__, |
| ch->pending_pkt_sz); |
| return -EBUSY; |
| } |
| ch->pending_pkt_sz = len; |
| |
| if (smd_stream_write_avail(ch) < (SMD_HEADER_SIZE)) { |
| ch->pending_pkt_sz = 0; |
| SMD_DBG("%s: no space to write packet header\n", __func__); |
| return -EAGAIN; |
| } |
| |
| hdr[0] = len; |
| hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0; |
| |
| |
| ret = smd_stream_write(ch, hdr, sizeof(hdr), 0); |
| if (ret < 0 || ret != sizeof(hdr)) { |
| ch->pending_pkt_sz = 0; |
| pr_err("%s: packet header failed to write\n", __func__); |
| return -EPERM; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_write_start); |
| |
| int smd_write_segment(smd_channel_t *ch, void *data, int len, int user_buf) |
| { |
| int bytes_written; |
| |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| if (len < 1) { |
| pr_err("%s: invalid length: %d\n", __func__, len); |
| return -EINVAL; |
| } |
| |
| if (!ch->pending_pkt_sz) { |
| pr_err("%s: no transaction in progress\n", __func__); |
| return -ENOEXEC; |
| } |
| if (ch->pending_pkt_sz - len < 0) { |
| pr_err("%s: segment of size: %d will make packet go over " |
| "length\n", __func__, len); |
| return -EINVAL; |
| } |
| |
| bytes_written = smd_stream_write(ch, data, len, user_buf); |
| |
| ch->pending_pkt_sz -= bytes_written; |
| |
| return bytes_written; |
| } |
| EXPORT_SYMBOL(smd_write_segment); |
| |
| int smd_write_end(smd_channel_t *ch) |
| { |
| |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| if (ch->pending_pkt_sz) { |
| pr_err("%s: current packet not completely written\n", __func__); |
| return -E2BIG; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_write_end); |
| |
| int smd_write_segment_avail(smd_channel_t *ch) |
| { |
| int n; |
| |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| if (!ch->is_pkt_ch) { |
| pr_err("%s: non-packet channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| n = smd_stream_write_avail(ch); |
| |
| /* pkt hdr already written, no need to reserve space for it */ |
| if (ch->pending_pkt_sz) |
| return n; |
| |
| return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0; |
| } |
| EXPORT_SYMBOL(smd_write_segment_avail); |
| |
| int smd_read(smd_channel_t *ch, void *data, int len) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->read(ch, data, len, 0); |
| } |
| EXPORT_SYMBOL(smd_read); |
| |
| int smd_read_user_buffer(smd_channel_t *ch, void *data, int len) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->read(ch, data, len, 1); |
| } |
| EXPORT_SYMBOL(smd_read_user_buffer); |
| |
| int smd_read_from_cb(smd_channel_t *ch, void *data, int len) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->read_from_cb(ch, data, len, 0); |
| } |
| EXPORT_SYMBOL(smd_read_from_cb); |
| |
| int smd_write(smd_channel_t *ch, const void *data, int len) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->pending_pkt_sz ? -EBUSY : ch->write(ch, data, len, 0); |
| } |
| EXPORT_SYMBOL(smd_write); |
| |
| int smd_write_user_buffer(smd_channel_t *ch, const void *data, int len) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->pending_pkt_sz ? -EBUSY : ch->write(ch, data, len, 1); |
| } |
| EXPORT_SYMBOL(smd_write_user_buffer); |
| |
| int smd_read_avail(smd_channel_t *ch) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->read_avail(ch); |
| } |
| EXPORT_SYMBOL(smd_read_avail); |
| |
| int smd_write_avail(smd_channel_t *ch) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->write_avail(ch); |
| } |
| EXPORT_SYMBOL(smd_write_avail); |
| |
| void smd_enable_read_intr(smd_channel_t *ch) |
| { |
| if (ch) |
| ch->half_ch->set_fBLOCKREADINTR(ch->send, 0); |
| } |
| EXPORT_SYMBOL(smd_enable_read_intr); |
| |
| void smd_disable_read_intr(smd_channel_t *ch) |
| { |
| if (ch) |
| ch->half_ch->set_fBLOCKREADINTR(ch->send, 1); |
| } |
| EXPORT_SYMBOL(smd_disable_read_intr); |
| |
| /** |
| * Enable/disable receive interrupts for the remote processor used by a |
| * particular channel. |
| * @ch: open channel handle to use for the edge |
| * @mask: 1 = mask interrupts; 0 = unmask interrupts |
| * @returns: 0 for success; < 0 for failure |
| * |
| * Note that this enables/disables all interrupts from the remote subsystem for |
| * all channels. As such, it should be used with care and only for specific |
| * use cases such as power-collapse sequencing. |
| */ |
| int smd_mask_receive_interrupt(smd_channel_t *ch, bool mask) |
| { |
| struct irq_chip *irq_chip; |
| struct irq_data *irq_data; |
| struct interrupt_config_item *int_cfg; |
| |
| if (!ch) |
| return -EINVAL; |
| |
| if (ch->type >= ARRAY_SIZE(edge_to_pids)) |
| return -ENODEV; |
| |
| int_cfg = &private_intr_config[edge_to_pids[ch->type].remote_pid].smd; |
| |
| if (int_cfg->irq_id < 0) |
| return -ENODEV; |
| |
| irq_chip = irq_get_chip(int_cfg->irq_id); |
| if (!irq_chip) |
| return -ENODEV; |
| |
| irq_data = irq_get_irq_data(int_cfg->irq_id); |
| if (!irq_data) |
| return -ENODEV; |
| |
| if (mask) { |
| SMD_POWER_INFO("SMD Masking interrupts from %s\n", |
| edge_to_pids[ch->type].subsys_name); |
| irq_chip->irq_mask(irq_data); |
| } else { |
| SMD_POWER_INFO("SMD Unmasking interrupts from %s\n", |
| edge_to_pids[ch->type].subsys_name); |
| irq_chip->irq_unmask(irq_data); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_mask_receive_interrupt); |
| |
| int smd_wait_until_readable(smd_channel_t *ch, int bytes) |
| { |
| return -1; |
| } |
| |
| int smd_wait_until_writable(smd_channel_t *ch, int bytes) |
| { |
| return -1; |
| } |
| |
| int smd_cur_packet_size(smd_channel_t *ch) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return ch->current_packet; |
| } |
| EXPORT_SYMBOL(smd_cur_packet_size); |
| |
| int smd_tiocmget(smd_channel_t *ch) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| return (ch->half_ch->get_fDSR(ch->recv) ? TIOCM_DSR : 0) | |
| (ch->half_ch->get_fCTS(ch->recv) ? TIOCM_CTS : 0) | |
| (ch->half_ch->get_fCD(ch->recv) ? TIOCM_CD : 0) | |
| (ch->half_ch->get_fRI(ch->recv) ? TIOCM_RI : 0) | |
| (ch->half_ch->get_fCTS(ch->send) ? TIOCM_RTS : 0) | |
| (ch->half_ch->get_fDSR(ch->send) ? TIOCM_DTR : 0); |
| } |
| EXPORT_SYMBOL(smd_tiocmget); |
| |
| /* this api will be called while holding smd_lock */ |
| int |
| smd_tiocmset_from_cb(smd_channel_t *ch, unsigned int set, unsigned int clear) |
| { |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (set & TIOCM_DTR) |
| ch->half_ch->set_fDSR(ch->send, 1); |
| |
| if (set & TIOCM_RTS) |
| ch->half_ch->set_fCTS(ch->send, 1); |
| |
| if (clear & TIOCM_DTR) |
| ch->half_ch->set_fDSR(ch->send, 0); |
| |
| if (clear & TIOCM_RTS) |
| ch->half_ch->set_fCTS(ch->send, 0); |
| |
| ch->half_ch->set_fSTATE(ch->send, 1); |
| barrier(); |
| ch->notify_other_cpu(ch); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_tiocmset_from_cb); |
| |
| int smd_tiocmset(smd_channel_t *ch, unsigned int set, unsigned int clear) |
| { |
| unsigned long flags; |
| |
| if (!ch) { |
| pr_err("%s: Invalid channel specified\n", __func__); |
| return -ENODEV; |
| } |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| smd_tiocmset_from_cb(ch, set, clear); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smd_tiocmset); |
| |
| int smd_is_pkt_avail(smd_channel_t *ch) |
| { |
| unsigned long flags; |
| |
| if (!ch || !ch->is_pkt_ch) |
| return -EINVAL; |
| |
| if (ch->current_packet) |
| return 1; |
| |
| spin_lock_irqsave(&smd_lock, flags); |
| update_packet_state(ch); |
| spin_unlock_irqrestore(&smd_lock, flags); |
| |
| return ch->current_packet ? 1 : 0; |
| } |
| EXPORT_SYMBOL(smd_is_pkt_avail); |
| |
| static int smsm_cb_init(void) |
| { |
| struct smsm_state_info *state_info; |
| int n; |
| int ret = 0; |
| |
| smsm_states = kmalloc(sizeof(struct smsm_state_info)*SMSM_NUM_ENTRIES, |
| GFP_KERNEL); |
| |
| if (!smsm_states) { |
| pr_err("%s: SMSM init failed\n", __func__); |
| return -ENOMEM; |
| } |
| |
| smsm_cb_wq = create_singlethread_workqueue("smsm_cb_wq"); |
| if (!smsm_cb_wq) { |
| pr_err("%s: smsm_cb_wq creation failed\n", __func__); |
| kfree(smsm_states); |
| return -EFAULT; |
| } |
| |
| mutex_lock(&smsm_lock); |
| for (n = 0; n < SMSM_NUM_ENTRIES; n++) { |
| state_info = &smsm_states[n]; |
| state_info->last_value = __raw_readl(SMSM_STATE_ADDR(n)); |
| state_info->intr_mask_set = 0x0; |
| state_info->intr_mask_clear = 0x0; |
| INIT_LIST_HEAD(&state_info->callbacks); |
| } |
| mutex_unlock(&smsm_lock); |
| |
| return ret; |
| } |
| |
| static int smsm_init(void) |
| { |
| struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; |
| int i; |
| struct smsm_size_info_type *smsm_size_info; |
| unsigned long flags; |
| unsigned long j_start; |
| static int first = 1; |
| remote_spinlock_t *remote_spinlock; |
| |
| if (!first) |
| return 0; |
| first = 0; |
| |
| /* Verify that remote spinlock is not deadlocked */ |
| remote_spinlock = smem_get_remote_spinlock(); |
| j_start = jiffies; |
| while (!remote_spin_trylock_irqsave(remote_spinlock, flags)) { |
| if (jiffies_to_msecs(jiffies - j_start) > RSPIN_INIT_WAIT_MS) { |
| panic("%s: Remote processor %d will not release spinlock\n", |
| __func__, remote_spin_owner(remote_spinlock)); |
| } |
| } |
| remote_spin_unlock_irqrestore(remote_spinlock, flags); |
| |
| smsm_size_info = smem_alloc_to_proc(SMEM_SMSM_SIZE_INFO, |
| sizeof(struct smsm_size_info_type), 0, |
| SMEM_ANY_HOST_FLAG); |
| if (smsm_size_info) { |
| SMSM_NUM_ENTRIES = smsm_size_info->num_entries; |
| SMSM_NUM_HOSTS = smsm_size_info->num_hosts; |
| } |
| |
| i = kfifo_alloc(&smsm_snapshot_fifo, |
| sizeof(uint32_t) * SMSM_NUM_ENTRIES * SMSM_SNAPSHOT_CNT, |
| GFP_KERNEL); |
| if (i) { |
| pr_err("%s: SMSM state fifo alloc failed %d\n", __func__, i); |
| return i; |
| } |
| wake_lock_init(&smsm_snapshot_wakelock, WAKE_LOCK_SUSPEND, |
| "smsm_snapshot"); |
| |
| if (!smsm_info.state) { |
| smsm_info.state = smem_alloc2_to_proc(ID_SHARED_STATE, |
| SMSM_NUM_ENTRIES * |
| sizeof(uint32_t), 0, |
| SMEM_ANY_HOST_FLAG); |
| |
| if (smsm_info.state) { |
| __raw_writel(0, SMSM_STATE_ADDR(SMSM_APPS_STATE)); |
| if ((shared->version[VERSION_MODEM] >> 16) >= 0xB) |
| __raw_writel(0, \ |
| SMSM_STATE_ADDR(SMSM_APPS_DEM_I)); |
| } |
| } |
| |
| if (!smsm_info.intr_mask) { |
| smsm_info.intr_mask = smem_alloc2_to_proc( |
| SMEM_SMSM_CPU_INTR_MASK, |
| SMSM_NUM_ENTRIES * |
| SMSM_NUM_HOSTS * |
| sizeof(uint32_t), 0, |
| SMEM_ANY_HOST_FLAG); |
| |
| if (smsm_info.intr_mask) { |
| for (i = 0; i < SMSM_NUM_ENTRIES; i++) |
| __raw_writel(0x0, |
| SMSM_INTR_MASK_ADDR(i, SMSM_APPS)); |
| |
| /* Configure legacy modem bits */ |
| __raw_writel(LEGACY_MODEM_SMSM_MASK, |
| SMSM_INTR_MASK_ADDR(SMSM_MODEM_STATE, |
| SMSM_APPS)); |
| } |
| } |
| |
| if (!smsm_info.intr_mux) |
| smsm_info.intr_mux = smem_alloc2_to_proc(SMEM_SMD_SMSM_INTR_MUX, |
| SMSM_NUM_INTR_MUX * |
| sizeof(uint32_t), 0, |
| SMEM_ANY_HOST_FLAG); |
| |
| i = smsm_cb_init(); |
| if (i) |
| return i; |
| |
| wmb(); |
| |
| smsm_pm_notifier(&smsm_pm_nb, PM_POST_SUSPEND, NULL); |
| i = register_pm_notifier(&smsm_pm_nb); |
| if (i) |
| pr_err("%s: power state notif error %d\n", __func__, i); |
| |
| return 0; |
| } |
| |
| void smsm_reset_modem(unsigned mode) |
| { |
| if (mode == SMSM_SYSTEM_DOWNLOAD) { |
| mode = SMSM_RESET | SMSM_SYSTEM_DOWNLOAD; |
| } else if (mode == SMSM_MODEM_WAIT) { |
| mode = SMSM_RESET | SMSM_MODEM_WAIT; |
| } else { /* reset_mode is SMSM_RESET or default */ |
| mode = SMSM_RESET; |
| } |
| |
| smsm_change_state(SMSM_APPS_STATE, mode, mode); |
| } |
| EXPORT_SYMBOL(smsm_reset_modem); |
| |
| void smsm_reset_modem_cont(void) |
| { |
| unsigned long flags; |
| uint32_t state; |
| |
| if (!smsm_info.state) |
| return; |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| state = __raw_readl(SMSM_STATE_ADDR(SMSM_APPS_STATE)) \ |
| & ~SMSM_MODEM_WAIT; |
| __raw_writel(state, SMSM_STATE_ADDR(SMSM_APPS_STATE)); |
| wmb(); |
| spin_unlock_irqrestore(&smem_lock, flags); |
| } |
| EXPORT_SYMBOL(smsm_reset_modem_cont); |
| |
| static void smsm_cb_snapshot(uint32_t use_wakelock) |
| { |
| int n; |
| uint32_t new_state; |
| unsigned long flags; |
| int ret; |
| uint64_t timestamp; |
| |
| timestamp = sched_clock(); |
| ret = kfifo_avail(&smsm_snapshot_fifo); |
| if (ret < SMSM_SNAPSHOT_SIZE) { |
| pr_err("%s: SMSM snapshot full %d\n", __func__, ret); |
| return; |
| } |
| |
| /* |
| * To avoid a race condition with notify_smsm_cb_clients_worker, the |
| * following sequence must be followed: |
| * 1) increment snapshot count |
| * 2) insert data into FIFO |
| * |
| * Potentially in parallel, the worker: |
| * a) verifies >= 1 snapshots are in FIFO |
| * b) processes snapshot |
| * c) decrements reference count |
| * |
| * This order ensures that 1 will always occur before abc. |
| */ |
| if (use_wakelock) { |
| spin_lock_irqsave(&smsm_snapshot_count_lock, flags); |
| if (smsm_snapshot_count == 0) { |
| SMSM_POWER_INFO("SMSM snapshot wake lock\n"); |
| wake_lock(&smsm_snapshot_wakelock); |
| } |
| ++smsm_snapshot_count; |
| spin_unlock_irqrestore(&smsm_snapshot_count_lock, flags); |
| } |
| |
| /* queue state entries */ |
| for (n = 0; n < SMSM_NUM_ENTRIES; n++) { |
| new_state = __raw_readl(SMSM_STATE_ADDR(n)); |
| |
| ret = kfifo_in(&smsm_snapshot_fifo, |
| &new_state, sizeof(new_state)); |
| if (ret != sizeof(new_state)) { |
| pr_err("%s: SMSM snapshot failure %d\n", __func__, ret); |
| goto restore_snapshot_count; |
| } |
| } |
| |
| ret = kfifo_in(&smsm_snapshot_fifo, ×tamp, sizeof(timestamp)); |
| if (ret != sizeof(timestamp)) { |
| pr_err("%s: SMSM snapshot failure %d\n", __func__, ret); |
| goto restore_snapshot_count; |
| } |
| |
| /* queue wakelock usage flag */ |
| ret = kfifo_in(&smsm_snapshot_fifo, |
| &use_wakelock, sizeof(use_wakelock)); |
| if (ret != sizeof(use_wakelock)) { |
| pr_err("%s: SMSM snapshot failure %d\n", __func__, ret); |
| goto restore_snapshot_count; |
| } |
| |
| queue_work(smsm_cb_wq, &smsm_cb_work); |
| return; |
| |
| restore_snapshot_count: |
| if (use_wakelock) { |
| spin_lock_irqsave(&smsm_snapshot_count_lock, flags); |
| if (smsm_snapshot_count) { |
| --smsm_snapshot_count; |
| if (smsm_snapshot_count == 0) { |
| SMSM_POWER_INFO("SMSM snapshot wake unlock\n"); |
| wake_unlock(&smsm_snapshot_wakelock); |
| } |
| } else { |
| pr_err("%s: invalid snapshot count\n", __func__); |
| } |
| spin_unlock_irqrestore(&smsm_snapshot_count_lock, flags); |
| } |
| } |
| |
| static irqreturn_t smsm_irq_handler(int irq, void *data) |
| { |
| unsigned long flags; |
| |
| if (irq == INT_ADSP_A11_SMSM) { |
| uint32_t mux_val; |
| static uint32_t prev_smem_q6_apps_smsm; |
| |
| if (smsm_info.intr_mux && cpu_is_qsd8x50()) { |
| mux_val = __raw_readl( |
| SMSM_INTR_MUX_ADDR(SMEM_Q6_APPS_SMSM)); |
| if (mux_val != prev_smem_q6_apps_smsm) |
| prev_smem_q6_apps_smsm = mux_val; |
| } |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| smsm_cb_snapshot(1); |
| spin_unlock_irqrestore(&smem_lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| if (!smsm_info.state) { |
| SMSM_INFO("<SM NO STATE>\n"); |
| } else { |
| unsigned old_apps, apps; |
| unsigned modm = __raw_readl(SMSM_STATE_ADDR(SMSM_MODEM_STATE)); |
| |
| old_apps = apps = __raw_readl(SMSM_STATE_ADDR(SMSM_APPS_STATE)); |
| |
| SMSM_DBG("<SM %08x %08x>\n", apps, modm); |
| if (apps & SMSM_RESET) { |
| /* If we get an interrupt and the apps SMSM_RESET |
| bit is already set, the modem is acking the |
| app's reset ack. */ |
| if (!disable_smsm_reset_handshake) |
| apps &= ~SMSM_RESET; |
| /* Issue a fake irq to handle any |
| * smd state changes during reset |
| */ |
| smd_fake_irq_handler(0); |
| |
| /* queue modem restart notify chain */ |
| modem_queue_start_reset_notify(); |
| |
| } else if (modm & SMSM_RESET) { |
| pr_err("\nSMSM: Modem SMSM state changed to SMSM_RESET."); |
| if (!disable_smsm_reset_handshake) { |
| apps |= SMSM_RESET; |
| flush_cache_all(); |
| outer_flush_all(); |
| } |
| modem_queue_start_reset_notify(); |
| |
| } else if (modm & SMSM_INIT) { |
| if (!(apps & SMSM_INIT)) { |
| apps |= SMSM_INIT; |
| modem_queue_smsm_init_notify(); |
| } |
| |
| if (modm & SMSM_SMDINIT) |
| apps |= SMSM_SMDINIT; |
| if ((apps & (SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT)) == |
| (SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT)) |
| apps |= SMSM_RUN; |
| } else if (modm & SMSM_SYSTEM_DOWNLOAD) { |
| pr_err("\nSMSM: Modem SMSM state changed to SMSM_SYSTEM_DOWNLOAD."); |
| modem_queue_start_reset_notify(); |
| } |
| |
| if (old_apps != apps) { |
| SMSM_DBG("<SM %08x NOTIFY>\n", apps); |
| __raw_writel(apps, SMSM_STATE_ADDR(SMSM_APPS_STATE)); |
| notify_other_smsm(SMSM_APPS_STATE, (old_apps ^ apps)); |
| } |
| |
| smsm_cb_snapshot(1); |
| } |
| spin_unlock_irqrestore(&smem_lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t smsm_modem_irq_handler(int irq, void *data) |
| { |
| SMSM_POWER_INFO("SMSM Int Modem->Apps\n"); |
| ++interrupt_stats[SMD_MODEM].smsm_in_count; |
| return smsm_irq_handler(irq, data); |
| } |
| |
| irqreturn_t smsm_dsp_irq_handler(int irq, void *data) |
| { |
| SMSM_POWER_INFO("SMSM Int LPASS->Apps\n"); |
| ++interrupt_stats[SMD_Q6].smsm_in_count; |
| return smsm_irq_handler(irq, data); |
| } |
| |
| irqreturn_t smsm_dsps_irq_handler(int irq, void *data) |
| { |
| SMSM_POWER_INFO("SMSM Int DSPS->Apps\n"); |
| ++interrupt_stats[SMD_DSPS].smsm_in_count; |
| return smsm_irq_handler(irq, data); |
| } |
| |
| irqreturn_t smsm_wcnss_irq_handler(int irq, void *data) |
| { |
| SMSM_POWER_INFO("SMSM Int WCNSS->Apps\n"); |
| ++interrupt_stats[SMD_WCNSS].smsm_in_count; |
| return smsm_irq_handler(irq, data); |
| } |
| |
| /* |
| * Changes the global interrupt mask. The set and clear masks are re-applied |
| * every time the global interrupt mask is updated for callback registration |
| * and de-registration. |
| * |
| * The clear mask is applied first, so if a bit is set to 1 in both the clear |
| * mask and the set mask, the result will be that the interrupt is set. |
| * |
| * @smsm_entry SMSM entry to change |
| * @clear_mask 1 = clear bit, 0 = no-op |
| * @set_mask 1 = set bit, 0 = no-op |
| * |
| * @returns 0 for success, < 0 for error |
| */ |
| int smsm_change_intr_mask(uint32_t smsm_entry, |
| uint32_t clear_mask, uint32_t set_mask) |
| { |
| uint32_t old_mask, new_mask; |
| unsigned long flags; |
| |
| if (smsm_entry >= SMSM_NUM_ENTRIES) { |
| pr_err("smsm_change_state: Invalid entry %d\n", |
| smsm_entry); |
| return -EINVAL; |
| } |
| |
| if (!smsm_info.intr_mask) { |
| pr_err("smsm_change_intr_mask <SM NO STATE>\n"); |
| return -EIO; |
| } |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| smsm_states[smsm_entry].intr_mask_clear = clear_mask; |
| smsm_states[smsm_entry].intr_mask_set = set_mask; |
| |
| old_mask = __raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)); |
| new_mask = (old_mask & ~clear_mask) | set_mask; |
| __raw_writel(new_mask, SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)); |
| |
| wmb(); |
| spin_unlock_irqrestore(&smem_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smsm_change_intr_mask); |
| |
| int smsm_get_intr_mask(uint32_t smsm_entry, uint32_t *intr_mask) |
| { |
| if (smsm_entry >= SMSM_NUM_ENTRIES) { |
| pr_err("smsm_change_state: Invalid entry %d\n", |
| smsm_entry); |
| return -EINVAL; |
| } |
| |
| if (!smsm_info.intr_mask) { |
| pr_err("smsm_change_intr_mask <SM NO STATE>\n"); |
| return -EIO; |
| } |
| |
| *intr_mask = __raw_readl(SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)); |
| return 0; |
| } |
| EXPORT_SYMBOL(smsm_get_intr_mask); |
| |
| int smsm_change_state(uint32_t smsm_entry, |
| uint32_t clear_mask, uint32_t set_mask) |
| { |
| unsigned long flags; |
| uint32_t old_state, new_state; |
| |
| if (smsm_entry >= SMSM_NUM_ENTRIES) { |
| pr_err("smsm_change_state: Invalid entry %d", |
| smsm_entry); |
| return -EINVAL; |
| } |
| |
| if (!smsm_info.state) { |
| pr_err("smsm_change_state <SM NO STATE>\n"); |
| return -EIO; |
| } |
| spin_lock_irqsave(&smem_lock, flags); |
| |
| old_state = __raw_readl(SMSM_STATE_ADDR(smsm_entry)); |
| new_state = (old_state & ~clear_mask) | set_mask; |
| __raw_writel(new_state, SMSM_STATE_ADDR(smsm_entry)); |
| SMSM_POWER_INFO("%s %d:%08x->%08x", __func__, smsm_entry, |
| old_state, new_state); |
| notify_other_smsm(SMSM_APPS_STATE, (old_state ^ new_state)); |
| |
| spin_unlock_irqrestore(&smem_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smsm_change_state); |
| |
| uint32_t smsm_get_state(uint32_t smsm_entry) |
| { |
| uint32_t rv = 0; |
| |
| /* needs interface change to return error code */ |
| if (smsm_entry >= SMSM_NUM_ENTRIES) { |
| pr_err("smsm_change_state: Invalid entry %d", |
| smsm_entry); |
| return 0; |
| } |
| |
| if (!smsm_info.state) { |
| pr_err("smsm_get_state <SM NO STATE>\n"); |
| } else { |
| rv = __raw_readl(SMSM_STATE_ADDR(smsm_entry)); |
| } |
| |
| return rv; |
| } |
| EXPORT_SYMBOL(smsm_get_state); |
| |
| /** |
| * Performs SMSM callback client notifiction. |
| */ |
| void notify_smsm_cb_clients_worker(struct work_struct *work) |
| { |
| struct smsm_state_cb_info *cb_info; |
| struct smsm_state_info *state_info; |
| int n; |
| uint32_t new_state; |
| uint32_t state_changes; |
| uint32_t use_wakelock; |
| int ret; |
| unsigned long flags; |
| uint64_t t_snapshot; |
| uint64_t t_start; |
| unsigned long nanosec_rem; |
| |
| while (kfifo_len(&smsm_snapshot_fifo) >= SMSM_SNAPSHOT_SIZE) { |
| t_start = sched_clock(); |
| mutex_lock(&smsm_lock); |
| for (n = 0; n < SMSM_NUM_ENTRIES; n++) { |
| state_info = &smsm_states[n]; |
| |
| ret = kfifo_out(&smsm_snapshot_fifo, &new_state, |
| sizeof(new_state)); |
| if (ret != sizeof(new_state)) { |
| pr_err("%s: snapshot underflow %d\n", |
| __func__, ret); |
| mutex_unlock(&smsm_lock); |
| return; |
| } |
| |
| state_changes = state_info->last_value ^ new_state; |
| if (state_changes) { |
| SMSM_POWER_INFO("SMSM Change %d: %08x->%08x\n", |
| n, state_info->last_value, |
| new_state); |
| list_for_each_entry(cb_info, |
| &state_info->callbacks, cb_list) { |
| |
| if (cb_info->mask & state_changes) |
| cb_info->notify(cb_info->data, |
| state_info->last_value, |
| new_state); |
| } |
| state_info->last_value = new_state; |
| } |
| } |
| |
| ret = kfifo_out(&smsm_snapshot_fifo, &t_snapshot, |
| sizeof(t_snapshot)); |
| if (ret != sizeof(t_snapshot)) { |
| pr_err("%s: snapshot underflow %d\n", |
| __func__, ret); |
| mutex_unlock(&smsm_lock); |
| return; |
| } |
| |
| /* read wakelock flag */ |
| ret = kfifo_out(&smsm_snapshot_fifo, &use_wakelock, |
| sizeof(use_wakelock)); |
| if (ret != sizeof(use_wakelock)) { |
| pr_err("%s: snapshot underflow %d\n", |
| __func__, ret); |
| mutex_unlock(&smsm_lock); |
| return; |
| } |
| mutex_unlock(&smsm_lock); |
| |
| if (use_wakelock) { |
| spin_lock_irqsave(&smsm_snapshot_count_lock, flags); |
| if (smsm_snapshot_count) { |
| --smsm_snapshot_count; |
| if (smsm_snapshot_count == 0) { |
| SMSM_POWER_INFO("SMSM snapshot" |
| " wake unlock\n"); |
| wake_unlock(&smsm_snapshot_wakelock); |
| } |
| } else { |
| pr_err("%s: invalid snapshot count\n", |
| __func__); |
| } |
| spin_unlock_irqrestore(&smsm_snapshot_count_lock, |
| flags); |
| } |
| |
| t_start = t_start - t_snapshot; |
| nanosec_rem = do_div(t_start, 1000000000U); |
| SMSM_POWER_INFO( |
| "SMSM snapshot queue response time %6u.%09lu s\n", |
| (unsigned)t_start, nanosec_rem); |
| } |
| } |
| |
| |
| /** |
| * Registers callback for SMSM state notifications when the specified |
| * bits change. |
| * |
| * @smsm_entry Processor entry to deregister |
| * @mask Bits to deregister (if result is 0, callback is removed) |
| * @notify Notification function to deregister |
| * @data Opaque data passed in to callback |
| * |
| * @returns Status code |
| * <0 error code |
| * 0 inserted new entry |
| * 1 updated mask of existing entry |
| */ |
| int smsm_state_cb_register(uint32_t smsm_entry, uint32_t mask, |
| void (*notify)(void *, uint32_t, uint32_t), void *data) |
| { |
| struct smsm_state_info *state; |
| struct smsm_state_cb_info *cb_info; |
| struct smsm_state_cb_info *cb_found = 0; |
| uint32_t new_mask = 0; |
| int ret = 0; |
| |
| if (smsm_entry >= SMSM_NUM_ENTRIES) |
| return -EINVAL; |
| |
| mutex_lock(&smsm_lock); |
| |
| if (!smsm_states) { |
| /* smsm not yet initialized */ |
| ret = -ENODEV; |
| goto cleanup; |
| } |
| |
| state = &smsm_states[smsm_entry]; |
| list_for_each_entry(cb_info, |
| &state->callbacks, cb_list) { |
| if (!ret && (cb_info->notify == notify) && |
| (cb_info->data == data)) { |
| cb_info->mask |= mask; |
| cb_found = cb_info; |
| ret = 1; |
| } |
| new_mask |= cb_info->mask; |
| } |
| |
| if (!cb_found) { |
| cb_info = kmalloc(sizeof(struct smsm_state_cb_info), |
| GFP_ATOMIC); |
| if (!cb_info) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| cb_info->mask = mask; |
| cb_info->notify = notify; |
| cb_info->data = data; |
| INIT_LIST_HEAD(&cb_info->cb_list); |
| list_add_tail(&cb_info->cb_list, |
| &state->callbacks); |
| new_mask |= mask; |
| } |
| |
| /* update interrupt notification mask */ |
| if (smsm_entry == SMSM_MODEM_STATE) |
| new_mask |= LEGACY_MODEM_SMSM_MASK; |
| |
| if (smsm_info.intr_mask) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| new_mask = (new_mask & ~state->intr_mask_clear) |
| | state->intr_mask_set; |
| __raw_writel(new_mask, |
| SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)); |
| wmb(); |
| spin_unlock_irqrestore(&smem_lock, flags); |
| } |
| |
| cleanup: |
| mutex_unlock(&smsm_lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(smsm_state_cb_register); |
| |
| |
| /** |
| * Deregisters for SMSM state notifications for the specified bits. |
| * |
| * @smsm_entry Processor entry to deregister |
| * @mask Bits to deregister (if result is 0, callback is removed) |
| * @notify Notification function to deregister |
| * @data Opaque data passed in to callback |
| * |
| * @returns Status code |
| * <0 error code |
| * 0 not found |
| * 1 updated mask |
| * 2 removed callback |
| */ |
| int smsm_state_cb_deregister(uint32_t smsm_entry, uint32_t mask, |
| void (*notify)(void *, uint32_t, uint32_t), void *data) |
| { |
| struct smsm_state_cb_info *cb_info; |
| struct smsm_state_cb_info *cb_tmp; |
| struct smsm_state_info *state; |
| uint32_t new_mask = 0; |
| int ret = 0; |
| |
| if (smsm_entry >= SMSM_NUM_ENTRIES) |
| return -EINVAL; |
| |
| mutex_lock(&smsm_lock); |
| |
| if (!smsm_states) { |
| /* smsm not yet initialized */ |
| mutex_unlock(&smsm_lock); |
| return -ENODEV; |
| } |
| |
| state = &smsm_states[smsm_entry]; |
| list_for_each_entry_safe(cb_info, cb_tmp, |
| &state->callbacks, cb_list) { |
| if (!ret && (cb_info->notify == notify) && |
| (cb_info->data == data)) { |
| cb_info->mask &= ~mask; |
| ret = 1; |
| if (!cb_info->mask) { |
| /* no mask bits set, remove callback */ |
| list_del(&cb_info->cb_list); |
| kfree(cb_info); |
| ret = 2; |
| continue; |
| } |
| } |
| new_mask |= cb_info->mask; |
| } |
| |
| /* update interrupt notification mask */ |
| if (smsm_entry == SMSM_MODEM_STATE) |
| new_mask |= LEGACY_MODEM_SMSM_MASK; |
| |
| if (smsm_info.intr_mask) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smem_lock, flags); |
| new_mask = (new_mask & ~state->intr_mask_clear) |
| | state->intr_mask_set; |
| __raw_writel(new_mask, |
| SMSM_INTR_MASK_ADDR(smsm_entry, SMSM_APPS)); |
| wmb(); |
| spin_unlock_irqrestore(&smem_lock, flags); |
| } |
| |
| mutex_unlock(&smsm_lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(smsm_state_cb_deregister); |
| |
| static int restart_notifier_cb(struct notifier_block *this, |
| unsigned long code, |
| void *data); |
| |
| static struct restart_notifier_block restart_notifiers[] = { |
| {SMD_MODEM, "modem", .nb.notifier_call = restart_notifier_cb}, |
| {SMD_Q6, "lpass", .nb.notifier_call = restart_notifier_cb}, |
| {SMD_WCNSS, "wcnss", .nb.notifier_call = restart_notifier_cb}, |
| {SMD_DSPS, "dsps", .nb.notifier_call = restart_notifier_cb}, |
| {SMD_MODEM, "gss", .nb.notifier_call = restart_notifier_cb}, |
| {SMD_Q6, "adsp", .nb.notifier_call = restart_notifier_cb}, |
| }; |
| |
| static int restart_notifier_cb(struct notifier_block *this, |
| unsigned long code, |
| void *data) |
| { |
| remote_spinlock_t *remote_spinlock; |
| |
| /* |
| * Some SMD or SMSM clients assume SMD/SMSM SSR handling will be |
| * done in the AFTER_SHUTDOWN level. If this ever changes, extra |
| * care should be taken to verify no clients are broken. |
| */ |
| if (code == SUBSYS_AFTER_SHUTDOWN) { |
| struct restart_notifier_block *notifier; |
| |
| notifier = container_of(this, |
| struct restart_notifier_block, nb); |
| SMD_INFO("%s: ssrestart for processor %d ('%s')\n", |
| __func__, notifier->processor, |
| notifier->name); |
| |
| remote_spinlock = smem_get_remote_spinlock(); |
| remote_spin_release(remote_spinlock, notifier->processor); |
| remote_spin_release_all(notifier->processor); |
| |
| smd_channel_reset(notifier->processor); |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /** |
| * smd_post_init() - SMD post initialization |
| * @is_leagcy: 1 for Leagcy/platform device init sequence |
| * 0 for device tree init sequence |
| * @remote_pid: remote pid that has been initialized. Ignored when is_legacy=1 |
| * |
| * This function is used by the legacy and device tree initialization |
| * to complete the SMD init sequence. |
| */ |
| void smd_post_init(bool is_legacy, unsigned remote_pid) |
| { |
| int i; |
| |
| if (is_legacy) { |
| smd_initialized = 1; |
| smd_alloc_loopback_channel(); |
| for (i = 1; i < NUM_SMD_SUBSYSTEMS; ++i) |
| schedule_work(&remote_info[i].probe_work); |
| } else { |
| schedule_work(&remote_info[remote_pid].probe_work); |
| } |
| } |
| |
| /** |
| * smsm_post_init() - SMSM post initialization |
| * @returns: 0 for success, standard Linux error code otherwise |
| * |
| * This function is used by the legacy and device tree initialization |
| * to complete the SMSM init sequence. |
| */ |
| int smsm_post_init(void) |
| { |
| int ret; |
| |
| ret = smsm_init(); |
| if (ret) { |
| pr_err("smsm_init() failed ret = %d\n", ret); |
| return ret; |
| } |
| smsm_irq_handler(0, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * smd_get_intr_config() - Get interrupt configuration structure |
| * @edge: edge type identifes local and remote processor |
| * @returns: pointer to interrupt configuration |
| * |
| * This function returns the interrupt configuration of remote processor |
| * based on the edge type. |
| */ |
| struct interrupt_config *smd_get_intr_config(uint32_t edge) |
| { |
| if (edge >= ARRAY_SIZE(edge_to_pids)) |
| return NULL; |
| return &private_intr_config[edge_to_pids[edge].remote_pid]; |
| } |
| |
| /** |
| * smd_get_edge_remote_pid() - Get the remote processor ID |
| * @edge: edge type identifes local and remote processor |
| * @returns: remote processor ID |
| * |
| * This function returns remote processor ID based on edge type. |
| */ |
| int smd_edge_to_remote_pid(uint32_t edge) |
| { |
| if (edge >= ARRAY_SIZE(edge_to_pids)) |
| return -EINVAL; |
| return edge_to_pids[edge].remote_pid; |
| } |
| |
| /** |
| * smd_set_edge_subsys_name() - Set the subsystem name |
| * @edge: edge type identifies local and remote processor |
| * @sussys_name: pointer to subsystem name |
| * |
| * This function is used to set the subsystem name for given edge type. |
| */ |
| void smd_set_edge_subsys_name(uint32_t edge, const char *subsys_name) |
| { |
| if (edge < ARRAY_SIZE(edge_to_pids)) |
| strlcpy(edge_to_pids[edge].subsys_name, |
| subsys_name, SMD_MAX_CH_NAME_LEN); |
| else |
| pr_err("%s: Invalid edge type[%d]\n", __func__, edge); |
| } |
| |
| /** |
| * smd_set_edge_initialized() - Set the edge initialized status |
| * @edge: edge type identifies local and remote processor |
| * |
| * This function set the initialized varibale based on edge type. |
| */ |
| void smd_set_edge_initialized(uint32_t edge) |
| { |
| if (edge < ARRAY_SIZE(edge_to_pids)) |
| edge_to_pids[edge].initialized = true; |
| else |
| pr_err("%s: Invalid edge type[%d]\n", __func__, edge); |
| } |
| |
| /** |
| * smd_cfg_smd_intr() - Set the SMD interrupt configuration |
| * @proc: remote processor ID |
| * @mask: bit position in IRQ register |
| * @ptr: IRQ register |
| * |
| * This function is called in Legacy init sequence and used to set |
| * the SMD interrupt configurations for particular processor. |
| */ |
| void smd_cfg_smd_intr(uint32_t proc, uint32_t mask, void *ptr) |
| { |
| private_intr_config[proc].smd.out_bit_pos = mask; |
| private_intr_config[proc].smd.out_base = ptr; |
| private_intr_config[proc].smd.out_offset = 0; |
| } |
| |
| /* |
| * smd_cfg_smsm_intr() - Set the SMSM interrupt configuration |
| * @proc: remote processor ID |
| * @mask: bit position in IRQ register |
| * @ptr: IRQ register |
| * |
| * This function is called in Legacy init sequence and used to set |
| * the SMSM interrupt configurations for particular processor. |
| */ |
| void smd_cfg_smsm_intr(uint32_t proc, uint32_t mask, void *ptr) |
| { |
| private_intr_config[proc].smsm.out_bit_pos = mask; |
| private_intr_config[proc].smsm.out_base = ptr; |
| private_intr_config[proc].smsm.out_offset = 0; |
| } |
| |
| static __init int modem_restart_late_init(void) |
| { |
| int i; |
| void *handle; |
| struct restart_notifier_block *nb; |
| |
| for (i = 0; i < ARRAY_SIZE(restart_notifiers); i++) { |
| nb = &restart_notifiers[i]; |
| handle = subsys_notif_register_notifier(nb->name, &nb->nb); |
| SMD_DBG("%s: registering notif for '%s', handle=%p\n", |
| __func__, nb->name, handle); |
| } |
| |
| return 0; |
| } |
| late_initcall(modem_restart_late_init); |
| |
| int __init msm_smd_init(void) |
| { |
| static bool registered; |
| int rc; |
| int i; |
| |
| if (registered) |
| return 0; |
| |
| smd_log_ctx = ipc_log_context_create(NUM_LOG_PAGES, "smd"); |
| if (!smd_log_ctx) { |
| pr_err("%s: unable to create SMD logging context\n", __func__); |
| msm_smd_debug_mask = 0; |
| } |
| |
| smsm_log_ctx = ipc_log_context_create(NUM_LOG_PAGES, "smsm"); |
| if (!smsm_log_ctx) { |
| pr_err("%s: unable to create SMSM logging context\n", __func__); |
| msm_smd_debug_mask = 0; |
| } |
| |
| registered = true; |
| |
| for (i = 0; i < NUM_SMD_SUBSYSTEMS; ++i) { |
| remote_info[i].remote_pid = i; |
| remote_info[i].free_space = UINT_MAX; |
| INIT_WORK(&remote_info[i].probe_work, smd_channel_probe_worker); |
| INIT_LIST_HEAD(&remote_info[i].ch_list); |
| } |
| |
| channel_close_wq = create_singlethread_workqueue("smd_channel_close"); |
| if (IS_ERR(channel_close_wq)) { |
| pr_err("%s: create_singlethread_workqueue ENOMEM\n", __func__); |
| return -ENOMEM; |
| } |
| |
| rc = msm_smd_driver_register(); |
| if (rc) { |
| pr_err("%s: msm_smd_driver register failed %d\n", |
| __func__, rc); |
| return rc; |
| } |
| return 0; |
| } |
| |
| module_init(msm_smd_init); |
| |
| MODULE_DESCRIPTION("MSM Shared Memory Core"); |
| MODULE_AUTHOR("Brian Swetland <swetland@google.com>"); |
| MODULE_LICENSE("GPL"); |