diag: dci: Add DCI support for APSS logs and events and cmd/rsp
Currently, Diag DCI supports only modem. Add DCI functionality
to support logs and events generated on the apss processor. Also
add the command response support for DCI on apps processor. It
also handles dedicated commands that are handled exclusively by
the Apps processor.
Change-Id: I8019ed61b9696b62de9db142ebd84ccb12bf19d4
Signed-off-by: Katish Paran <kparan@codeaurora.org>
diff --git a/drivers/char/diag/diag_debugfs.c b/drivers/char/diag/diag_debugfs.c
index 3a1c96b..4dd0845 100644
--- a/drivers/char/diag/diag_debugfs.c
+++ b/drivers/char/diag/diag_debugfs.c
@@ -233,38 +233,30 @@
bytes_in_buf += bytes_written;
bytes_remaining -= bytes_written;
#endif
- if (driver->dci_device) {
- bytes_written = scnprintf(buf+bytes_in_buf,
- bytes_remaining,
- "dci power active, relax: %lu, %lu\n",
- driver->dci_device->power.wakeup->active_count,
- driver->dci_device->power.wakeup->relax_count);
- bytes_in_buf += bytes_written;
- bytes_remaining -= bytes_written;
- }
- if (driver->dci_cmd_device) {
- bytes_written = scnprintf(buf+bytes_in_buf,
- bytes_remaining,
- "dci cmd power active, relax: %lu, %lu\n",
- driver->dci_cmd_device->power.wakeup->
- active_count,
- driver->dci_cmd_device->power.wakeup->
- relax_count);
- bytes_in_buf += bytes_written;
- bytes_remaining -= bytes_written;
- }
+ bytes_written = scnprintf(buf+bytes_in_buf,
+ bytes_remaining,
+ "dci power: active, relax: %lu, %lu\n",
+ driver->diag_dev->power.wakeup->
+ active_count,
+ driver->diag_dev->
+ power.wakeup->relax_count);
+ bytes_in_buf += bytes_written;
+ bytes_remaining -= bytes_written;
+
}
temp_data += diag_dbgfs_dci_data_index;
for (i = diag_dbgfs_dci_data_index; i < DIAG_DCI_DEBUG_CNT; i++) {
if (temp_data->iteration != 0) {
bytes_written = scnprintf(
buf + bytes_in_buf, bytes_remaining,
- "i %-10ld\t"
- "s %-10d\t"
- "c %-10d\t"
+ "i %-5ld\t"
+ "s %-5d\t"
+ "p %-5d\t"
+ "c %-5d\t"
"t %-15s\n",
temp_data->iteration,
temp_data->data_size,
+ temp_data->peripheral,
temp_data->ch_type,
temp_data->time_stamp);
bytes_in_buf += bytes_written;
@@ -446,7 +438,8 @@
"POOL_TYPE_COPY: [0x%p : 0x%p] count = %d\n"
"POOL_TYPE_HDLC: [0x%p : 0x%p] count = %d\n"
"POOL_TYPE_USER: [0x%p : 0x%p] count = %d\n"
- "POOL_TYPE_WRITE_STRUCT: [0x%p : 0x%p] count = %d\n",
+ "POOL_TYPE_WRITE_STRUCT: [0x%p : 0x%p] count = %d\n"
+ "POOL_TYPE_DCI: [0x%p : 0x%p] count = %d\n",
driver->diagpool,
diag_pools_array[POOL_COPY_IDX],
driver->count,
@@ -458,7 +451,10 @@
driver->count_user_pool,
driver->diag_write_struct_pool,
diag_pools_array[POOL_WRITE_STRUCT_IDX],
- driver->count_write_struct_pool);
+ driver->count_write_struct_pool,
+ driver->diag_dci_pool,
+ diag_pools_array[POOL_DCI_IDX],
+ driver->count_dci_pool);
for (i = 0; i < MAX_HSIC_CH; i++) {
if (!diag_hsic[i].hsic_inited)
@@ -506,7 +502,8 @@
"POOL_TYPE_COPY: [0x%p : 0x%p] count = %d\n"
"POOL_TYPE_HDLC: [0x%p : 0x%p] count = %d\n"
"POOL_TYPE_USER: [0x%p : 0x%p] count = %d\n"
- "POOL_TYPE_WRITE_STRUCT: [0x%p : 0x%p] count = %d\n",
+ "POOL_TYPE_WRITE_STRUCT: [0x%p : 0x%p] count = %d\n"
+ "POOL_TYPE_DCI: [0x%p : 0x%p] count = %d\n",
driver->diagpool,
diag_pools_array[POOL_COPY_IDX],
driver->count,
@@ -518,7 +515,10 @@
driver->count_user_pool,
driver->diag_write_struct_pool,
diag_pools_array[POOL_WRITE_STRUCT_IDX],
- driver->count_write_struct_pool);
+ driver->count_write_struct_pool,
+ driver->diag_dci_pool,
+ diag_pools_array[POOL_DCI_IDX],
+ driver->count_dci_pool);
ret = simple_read_from_buffer(ubuf, count, ppos, buf, ret);