Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', 'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
diff --git a/.gitignore b/.gitignore
index 8faa6c0..5d56a3f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -28,6 +28,7 @@
*.gz
*.bz2
*.lzma
+*.xz
*.lzo
*.patch
*.gcno
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 5e87ad5..f51f285 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -82,6 +82,11 @@
</sect1>
</chapter>
+ <chapter id="fs_events">
+ <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+ </chapter>
+
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
diff --git a/Documentation/arm/SH-Mobile/Makefile b/Documentation/arm/SH-Mobile/Makefile
new file mode 100644
index 0000000..8771d83
--- /dev/null
+++ b/Documentation/arm/SH-Mobile/Makefile
@@ -0,0 +1,8 @@
+BIN := vrl4
+
+.PHONY: all
+all: $(BIN)
+
+.PHONY: clean
+clean:
+ rm -f *.o $(BIN)
diff --git a/Documentation/arm/SH-Mobile/vrl4.c b/Documentation/arm/SH-Mobile/vrl4.c
new file mode 100644
index 0000000..e8a1913
--- /dev/null
+++ b/Documentation/arm/SH-Mobile/vrl4.c
@@ -0,0 +1,169 @@
+/*
+ * vrl4 format generator
+ *
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * usage: vrl4 < zImage > out
+ * dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
+ *
+ * Reads a zImage from stdin and writes a vrl4 image to stdout.
+ * In practice this means writing a padded vrl4 header to stdout followed
+ * by the zImage.
+ *
+ * The padding places the zImage at ALIGN bytes into the output.
+ * The vrl4 uses ALIGN + START_BASE as the start_address.
+ * This is where the mask ROM will jump to after verifying the header.
+ *
+ * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
+ * That is, the mask ROM will load the padded header (ALIGN bytes)
+ * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
+ * whichever is smaller.
+ *
+ * The zImage is not modified in any way.
+ */
+
+#define _BSD_SOURCE
+#include <endian.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <errno.h>
+
+struct hdr {
+ uint32_t magic1;
+ uint32_t reserved1;
+ uint32_t magic2;
+ uint32_t reserved2;
+ uint16_t copy_size;
+ uint16_t boot_options;
+ uint32_t reserved3;
+ uint32_t start_address;
+ uint32_t reserved4;
+ uint32_t reserved5;
+ char reserved6[308];
+};
+
+#define DECLARE_HDR(h) \
+ struct hdr (h) = { \
+ .magic1 = htole32(0xea000000), \
+ .reserved1 = htole32(0x56), \
+ .magic2 = htole32(0xe59ff008), \
+ .reserved3 = htole16(0x1) }
+
+/* Align to 512 bytes, the MMCIF sector size */
+#define ALIGN_BITS 9
+#define ALIGN (1 << ALIGN_BITS)
+
+#define START_BASE 0xe55b0000
+
+/*
+ * With an alignment of 512 the header uses the first sector.
+ * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
+ * So there are 127 sectors left for the boot programme. But in practice
+ * Only a small portion of a zImage is needed, 16 sectors should be more
+ * than enough.
+ *
+ * Note that this sets how much of the zImage is copied by the mask ROM.
+ * The entire zImage is present after the header and is loaded
+ * by the code in the boot program (which is the first portion of the zImage).
+ */
+#define MAX_BOOT_PROG_LEN (16 * 512)
+
+#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
+
+ssize_t do_read(int fd, void *buf, size_t count)
+{
+ size_t offset = 0;
+ ssize_t l;
+
+ while (offset < count) {
+ l = read(fd, buf + offset, count - offset);
+ if (!l)
+ break;
+ if (l < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ continue;
+ perror("read");
+ return -1;
+ }
+ offset += l;
+ }
+
+ return offset;
+}
+
+ssize_t do_write(int fd, const void *buf, size_t count)
+{
+ size_t offset = 0;
+ ssize_t l;
+
+ while (offset < count) {
+ l = write(fd, buf + offset, count - offset);
+ if (l < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ continue;
+ perror("write");
+ return -1;
+ }
+ offset += l;
+ }
+
+ return offset;
+}
+
+ssize_t write_zero(int fd, size_t len)
+{
+ size_t i = len;
+
+ while (i--) {
+ const char x = 0;
+ if (do_write(fd, &x, 1) < 0)
+ return -1;
+ }
+
+ return len;
+}
+
+int main(void)
+{
+ DECLARE_HDR(hdr);
+ char boot_program[MAX_BOOT_PROG_LEN];
+ size_t aligned_hdr_len, alligned_prog_len;
+ ssize_t prog_len;
+
+ prog_len = do_read(0, boot_program, sizeof(boot_program));
+ if (prog_len <= 0)
+ return -1;
+
+ aligned_hdr_len = ROUND_UP(sizeof(hdr));
+ hdr.start_address = htole32(START_BASE + aligned_hdr_len);
+ alligned_prog_len = ROUND_UP(prog_len);
+ hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
+
+ if (do_write(1, &hdr, sizeof(hdr)) < 0)
+ return -1;
+ if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
+ return -1;
+
+ if (do_write(1, boot_program, prog_len) < 0)
+ return 1;
+
+ /* Write out the rest of the kernel */
+ while (1) {
+ prog_len = do_read(0, boot_program, sizeof(boot_program));
+ if (prog_len < 0)
+ return 1;
+ if (prog_len == 0)
+ break;
+ if (do_write(1, boot_program, prog_len) < 0)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt b/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt
new file mode 100644
index 0000000..efff8ae
--- /dev/null
+++ b/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt
@@ -0,0 +1,29 @@
+ROM-able zImage boot from MMC
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
+SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an AP4EB board using the developer 1A eMMC
+boot mode which is configured using the following jumper settings.
+The board used for testing required a patched mask ROM in order for
+this mode to function.
+
+ 8 7 6 5 4 3 2 1
+ x|x|x|x|x| |x|
+S4 -+-+-+-+-+-+-+-
+ | | | | |x| |x on
+
+The zImage must be written to the MMC card at sector 1 (512 bytes) in
+vrl4 format. A utility vrl4 is supplied to accomplish this.
+
+e.g.
+ vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
+
+A dual-voltage MMC 4.0 card was used for testing.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef1..a22ecf4 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
- Datasheet: -
+ Datasheet:
+ http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Author:
Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@
Description
-----------
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
@@ -81,15 +86,19 @@
which applies to all limits. This register can be written by writing into
temp1_crit_hyst. Other hysteresis attributes are read-only.
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
Sysfs entries
-------------
temp1_input Temperature (RO)
-temp1_min Minimum temperature (RW)
-temp1_max Maximum temperature (RW)
-temp1_crit Critical high temperature (RW)
+temp1_min Minimum temperature (RO or RW)
+temp1_max Maximum temperature (RO or RW)
+temp1_crit Critical high temperature (RO or RW)
-temp1_crit_hyst Critical hysteresis temperature (RW)
+temp1_crit_hyst Critical hysteresis temperature (RO or RW)
temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee..d2b56a4 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
Prefix: 'k10temp'
Addresses scanned: PCI space
@@ -17,10 +19,14 @@
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@
-----------
This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4..f4a04c0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@
and is between 256 and 4096 characters. It is defined in the file
./include/asm/setup.h as COMMAND_LINE_SIZE.
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
- crashkernel=nn[KMG]@ss[KMG]
- [KNL] Reserve a chunk of physical memory to
- hold a kernel to switch to with kexec on panic.
+ crashkernel=size[KMG][@offset[KMG]]
+ [KNL] Using kexec, Linux can switch to a 'crash kernel'
+ upon panic. This parameter reserves the physical
+ memory region [offset, offset + size] for that kernel
+ image. If '@offset' is omitted, then a suitable offset
+ is selected automatically. Check
+ Documentation/kdump/kdump.txt for further details.
crashkernel=range1:size1[,range2:size2,...][@offset]
[KNL] Same as above, but depends on the memory
in the running system. The syntax of range is
start-[end] where start and end are both
a memory unit (amount[KMG]). See also
- Documentation/kdump/kdump.txt for a example.
+ Documentation/kdump/kdump.txt for an example.
cs89x0_dma= [HW,NET]
Format: <dma>
@@ -1262,10 +1271,9 @@
6 (KERN_INFO) informational
7 (KERN_DEBUG) debug-level messages
- log_buf_len=n Sets the size of the printk ring buffer, in bytes.
- Format: { n | nk | nM }
- n must be a power of two. The default size
- is set in the kernel config file.
+ log_buf_len=n[KMG] Sets the size of the printk ring buffer,
+ in bytes. n must be a power of two. The default
+ size is set in the kernel config file.
logo.nologo [FB] Disables display of the built-in Linux logo.
This may be used to provide more screen space for
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index fe5c099..4edd78d 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -40,8 +40,6 @@
- info on using the DECnet networking layer in Linux.
depca.txt
- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
-dgrs.txt
- - the Digi International RightSwitch SE-X Ethernet driver
dmfe.txt
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
e100.txt
@@ -50,8 +48,6 @@
- info on Intel's E1000 line of gigabit ethernet boards
eql.txt
- serial IP load balancing
-ethertap.txt
- - the Ethertap user space packet reception and transmission driver
ewrk3.txt
- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
filter.txt
@@ -104,8 +100,6 @@
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wavelan.txt
- - AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
x25.txt
- general info on X.25 development.
x25-iface.txt
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
index 5aba7a3..24c308d 100644
--- a/Documentation/networking/Makefile
+++ b/Documentation/networking/Makefile
@@ -4,6 +4,8 @@
# List of programs to build
hostprogs-y := ifenslave
+HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
+
# Tell kbuild to always build the programs
always := $(hostprogs-y)
diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt
index aefd1e6..04ca0632 100644
--- a/Documentation/networking/dns_resolver.txt
+++ b/Documentation/networking/dns_resolver.txt
@@ -61,7 +61,6 @@
create dns_resolver foo:* * /usr/sbin/dns.foo %k
-
=====
USAGE
=====
@@ -104,6 +103,14 @@
returned also.
+===============================
+READING DNS KEYS FROM USERSPACE
+===============================
+
+Keys of dns_resolver type can be read from userspace using keyctl_read() or
+"keyctl read/print/pipe".
+
+
=========
MECHANISM
=========
diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
index 996a27d..01c513f 100644
--- a/Documentation/workqueue.txt
+++ b/Documentation/workqueue.txt
@@ -190,9 +190,9 @@
* Long running CPU intensive workloads which can be better
managed by the system scheduler.
- WQ_FREEZEABLE
+ WQ_FREEZABLE
- A freezeable wq participates in the freeze phase of the system
+ A freezable wq participates in the freeze phase of the system
suspend operations. Work items on the wq are drained and no
new work item starts execution until thawed.
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c75..560ecce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
-M: Daniel Walker <dwalker@codeaurora.org>
+M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
@@ -1010,6 +1010,15 @@
S: Maintained
F: arch/arm/mach-s5p*/
+ARM/SAMSUNG MOBILE MACHINE SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s5pv210/mach-aquila.c
+F: arch/arm/mach-s5pv210/mach-goni.c
+F: arch/arm/mach-exynos4/mach-universal_c210.c
+F: arch/arm/mach-exynos4/mach-nuri.c
+
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -1467,6 +1476,7 @@
BONDING DRIVER
M: Jay Vosburgh <fubar@us.ibm.com>
+M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
@@ -1692,6 +1702,13 @@
S: Supported
F: scripts/checkpatch.pl
+CHINESE DOCUMENTATION
+M: Harry Wei <harryxiyou@gmail.com>
+L: xiyoulinuxkernelgroup@googlegroups.com
+L: linux-kernel@zh-kernel.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/zh_CN/
+
CISCO VIC ETHERNET NIC DRIVER
M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
@@ -2026,7 +2043,7 @@
F: drivers/scsi/dc395x.*
DCCP PROTOCOL
-M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+M: Gerrit Renker <gerrit@erg.abdn.ac.uk>
L: dccp@vger.kernel.org
W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
S: Maintained
@@ -2873,7 +2890,6 @@
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
@@ -3513,7 +3529,7 @@
F: Documentation/hwmon/jc42
JFS FILESYSTEM
-M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
+M: Dave Kleikamp <shaggy@kernel.org>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
@@ -5165,6 +5181,7 @@
RAPIDIO SUBSYSTEM
M: Matt Porter <mporter@kernel.crashing.org>
+M: Alexandre Bounine <alexandre.bounine@idt.com>
S: Maintained
F: drivers/rapidio/
@@ -5267,7 +5284,7 @@
F: drivers/net/wireless/rtl818x/rtl8180/
RTL8187 WIRELESS DRIVER
-M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M: Herton Ronaldo Krzesinski <herton@canonical.com>
M: Hin-Tak Leung <htl10@users.sourceforge.net>
M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
@@ -6105,7 +6122,7 @@
F: security/tomoyo/
TOPSTAR LAPTOP EXTRAS DRIVER
-M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M: Herton Ronaldo Krzesinski <herton@canonical.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/topstar-laptop.c
diff --git a/Makefile b/Makefile
index 5e40aa2..504f788 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 47f63d4..cc31bec 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -11,6 +11,7 @@
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
+ select GENERIC_HARDIRQS_NO_DEPRECATED
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 9ab234f..a19d600 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -44,11 +44,16 @@
int irq_select_affinity(unsigned int irq)
{
- struct irq_desc *desc = irq_to_desc[irq];
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip;
static int last_cpu;
int cpu = last_cpu + 1;
- if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
+ if (!data)
+ return 1;
+ chip = irq_data_get_irq_chip(data);
+
+ if (!chip->irq_set_affinity || irq_user_affinity[irq])
return 1;
while (!cpu_possible(cpu) ||
@@ -56,8 +61,8 @@
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- cpumask_copy(desc->affinity, cpumask_of(cpu));
- get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
+ cpumask_copy(data->affinity, cpumask_of(cpu));
+ chip->irq_set_affinity(data, cpumask_of(cpu), false);
return 0;
}
#endif /* CONFIG_SMP */
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 2d0679b..411ca11 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -228,14 +228,9 @@
void __init
init_rtc_irq(void)
{
- struct irq_desc *desc = irq_to_desc(RTC_IRQ);
-
- if (desc) {
- desc->status |= IRQ_DISABLED;
- set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
- handle_simple_irq, "RTC");
- setup_irq(RTC_IRQ, &timer_irqaction);
- }
+ set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+ handle_simple_irq, "RTC");
+ setup_irq(RTC_IRQ, &timer_irqaction);
}
/* Dummy irqactions. */
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 956ea0e..c7cc981 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -33,10 +33,10 @@
}
inline void
-i8259a_enable_irq(unsigned int irq)
+i8259a_enable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
- i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+ i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
spin_unlock(&i8259_irq_lock);
}
@@ -47,16 +47,18 @@
}
void
-i8259a_disable_irq(unsigned int irq)
+i8259a_disable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
- __i8259a_disable_irq(irq);
+ __i8259a_disable_irq(d->irq);
spin_unlock(&i8259_irq_lock);
}
void
-i8259a_mask_and_ack_irq(unsigned int irq)
+i8259a_mask_and_ack_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
@@ -71,9 +73,9 @@
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
- .unmask = i8259a_enable_irq,
- .mask = i8259a_disable_irq,
- .mask_ack = i8259a_mask_and_ack_irq,
+ .irq_unmask = i8259a_enable_irq,
+ .irq_mask = i8259a_disable_irq,
+ .irq_mask_ack = i8259a_mask_and_ack_irq,
};
void __init
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
index b63ccd7..d507a23 100644
--- a/arch/alpha/kernel/irq_impl.h
+++ b/arch/alpha/kernel/irq_impl.h
@@ -31,11 +31,9 @@
extern void common_init_isa_dma(void);
-extern void i8259a_enable_irq(unsigned int);
-extern void i8259a_disable_irq(unsigned int);
-extern void i8259a_mask_and_ack_irq(unsigned int);
-extern unsigned int i8259a_startup_irq(unsigned int);
-extern void i8259a_end_irq(unsigned int);
+extern void i8259a_enable_irq(struct irq_data *d);
+extern void i8259a_disable_irq(struct irq_data *d);
+extern void i8259a_mask_and_ack_irq(struct irq_data *d);
extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index 2863458..b30227f 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -29,21 +29,21 @@
}
static inline void
-pyxis_enable_irq(unsigned int irq)
+pyxis_enable_irq(struct irq_data *d)
{
- pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-pyxis_disable_irq(unsigned int irq)
+pyxis_disable_irq(struct irq_data *d)
{
- pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
-pyxis_mask_and_ack_irq(unsigned int irq)
+pyxis_mask_and_ack_irq(struct irq_data *d)
{
- unsigned long bit = 1UL << (irq - 16);
+ unsigned long bit = 1UL << (d->irq - 16);
unsigned long mask = cached_irq_mask &= ~bit;
/* Disable the interrupt. */
@@ -58,9 +58,9 @@
static struct irq_chip pyxis_irq_type = {
.name = "PYXIS",
- .mask_ack = pyxis_mask_and_ack_irq,
- .mask = pyxis_disable_irq,
- .unmask = pyxis_enable_irq,
+ .irq_mask_ack = pyxis_mask_and_ack_irq,
+ .irq_mask = pyxis_disable_irq,
+ .irq_unmask = pyxis_enable_irq,
};
void
@@ -103,7 +103,7 @@
if ((ignore_mask >> i) & 1)
continue;
set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
setup_irq(16+7, &isa_cascade_irqaction);
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index 0e57e82..82a47bb 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -18,27 +18,27 @@
DEFINE_SPINLOCK(srm_irq_lock);
static inline void
-srm_enable_irq(unsigned int irq)
+srm_enable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
- cserve_ena(irq - 16);
+ cserve_ena(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
static void
-srm_disable_irq(unsigned int irq)
+srm_disable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
- cserve_dis(irq - 16);
+ cserve_dis(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
.name = "SRM",
- .unmask = srm_enable_irq,
- .mask = srm_disable_irq,
- .mask_ack = srm_disable_irq,
+ .irq_unmask = srm_enable_irq,
+ .irq_mask = srm_disable_irq,
+ .irq_mask_ack = srm_disable_irq,
};
void __init
@@ -52,7 +52,7 @@
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index 7bef617..88d95e8 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -44,31 +44,31 @@
}
static inline void
-alcor_enable_irq(unsigned int irq)
+alcor_enable_irq(struct irq_data *d)
{
- alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-alcor_disable_irq(unsigned int irq)
+alcor_disable_irq(struct irq_data *d)
{
- alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
-alcor_mask_and_ack_irq(unsigned int irq)
+alcor_mask_and_ack_irq(struct irq_data *d)
{
- alcor_disable_irq(irq);
+ alcor_disable_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
- *(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
+ *(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 0; mb();
}
static void
-alcor_isa_mask_and_ack_irq(unsigned int irq)
+alcor_isa_mask_and_ack_irq(struct irq_data *d)
{
- i8259a_mask_and_ack_irq(irq);
+ i8259a_mask_and_ack_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
@@ -77,9 +77,9 @@
static struct irq_chip alcor_irq_type = {
.name = "ALCOR",
- .unmask = alcor_enable_irq,
- .mask = alcor_disable_irq,
- .mask_ack = alcor_mask_and_ack_irq,
+ .irq_unmask = alcor_enable_irq,
+ .irq_mask = alcor_disable_irq,
+ .irq_mask_ack = alcor_mask_and_ack_irq,
};
static void
@@ -126,9 +126,9 @@
if (i >= 16+20 && i <= 16+30)
continue;
set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
- i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
+ i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
init_i8259a_irqs();
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index b0c9164..57eb630 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -46,22 +46,22 @@
}
static inline void
-cabriolet_enable_irq(unsigned int irq)
+cabriolet_enable_irq(struct irq_data *d)
{
- cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
+ cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
}
static void
-cabriolet_disable_irq(unsigned int irq)
+cabriolet_disable_irq(struct irq_data *d)
{
- cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
+ cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
}
static struct irq_chip cabriolet_irq_type = {
.name = "CABRIOLET",
- .unmask = cabriolet_enable_irq,
- .mask = cabriolet_disable_irq,
- .mask_ack = cabriolet_disable_irq,
+ .irq_unmask = cabriolet_enable_irq,
+ .irq_mask = cabriolet_disable_irq,
+ .irq_mask_ack = cabriolet_disable_irq,
};
static void
@@ -107,7 +107,7 @@
for (i = 16; i < 35; ++i) {
set_irq_chip_and_handler(i, &cabriolet_irq_type,
handle_level_irq);
- irq_to_desc(i)->status |= IRQ_LEVEL;
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index edad5f7..481df4e 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -98,37 +98,37 @@
}
static void
-dp264_enable_irq(unsigned int irq)
+dp264_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask |= 1UL << irq;
+ cached_irq_mask |= 1UL << d->irq;
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-dp264_disable_irq(unsigned int irq)
+dp264_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask &= ~(1UL << irq);
+ cached_irq_mask &= ~(1UL << d->irq);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-clipper_enable_irq(unsigned int irq)
+clipper_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask |= 1UL << (irq - 16);
+ cached_irq_mask |= 1UL << (d->irq - 16);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
-clipper_disable_irq(unsigned int irq)
+clipper_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
- cached_irq_mask &= ~(1UL << (irq - 16));
+ cached_irq_mask &= ~(1UL << (d->irq - 16));
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
@@ -149,10 +149,11 @@
}
static int
-dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{
+dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
+{
spin_lock(&dp264_irq_lock);
- cpu_set_irq_affinity(irq, *affinity);
+ cpu_set_irq_affinity(d->irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@@ -160,10 +161,11 @@
}
static int
-clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
-{
+clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
+{
spin_lock(&dp264_irq_lock);
- cpu_set_irq_affinity(irq - 16, *affinity);
+ cpu_set_irq_affinity(d->irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@@ -171,19 +173,19 @@
}
static struct irq_chip dp264_irq_type = {
- .name = "DP264",
- .unmask = dp264_enable_irq,
- .mask = dp264_disable_irq,
- .mask_ack = dp264_disable_irq,
- .set_affinity = dp264_set_affinity,
+ .name = "DP264",
+ .irq_unmask = dp264_enable_irq,
+ .irq_mask = dp264_disable_irq,
+ .irq_mask_ack = dp264_disable_irq,
+ .irq_set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
- .name = "CLIPPER",
- .unmask = clipper_enable_irq,
- .mask = clipper_disable_irq,
- .mask_ack = clipper_disable_irq,
- .set_affinity = clipper_set_affinity,
+ .name = "CLIPPER",
+ .irq_unmask = clipper_enable_irq,
+ .irq_mask = clipper_disable_irq,
+ .irq_mask_ack = clipper_disable_irq,
+ .irq_set_affinity = clipper_set_affinity,
};
static void
@@ -268,8 +270,8 @@
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
index ae5f29d..402e908 100644
--- a/arch/alpha/kernel/sys_eb64p.c
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -44,22 +44,22 @@
}
static inline void
-eb64p_enable_irq(unsigned int irq)
+eb64p_enable_irq(struct irq_data *d)
{
- eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+ eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
}
static void
-eb64p_disable_irq(unsigned int irq)
+eb64p_disable_irq(struct irq_data *d)
{
- eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
+ eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
}
static struct irq_chip eb64p_irq_type = {
.name = "EB64P",
- .unmask = eb64p_enable_irq,
- .mask = eb64p_disable_irq,
- .mask_ack = eb64p_disable_irq,
+ .irq_unmask = eb64p_enable_irq,
+ .irq_mask = eb64p_disable_irq,
+ .irq_mask_ack = eb64p_disable_irq,
};
static void
@@ -118,9 +118,9 @@
init_i8259a_irqs();
for (i = 16; i < 32; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
- }
+ irq_set_status_flags(i, IRQ_LEVEL);
+ }
common_init_isa_dma();
setup_irq(16+5, &isa_cascade_irqaction);
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index 1121bc5..0b44a54 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -51,16 +51,18 @@
}
static inline void
-eiger_enable_irq(unsigned int irq)
+eiger_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
eiger_update_irq_hw(irq, mask);
}
static void
-eiger_disable_irq(unsigned int irq)
+eiger_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
eiger_update_irq_hw(irq, mask);
@@ -68,9 +70,9 @@
static struct irq_chip eiger_irq_type = {
.name = "EIGER",
- .unmask = eiger_enable_irq,
- .mask = eiger_disable_irq,
- .mask_ack = eiger_disable_irq,
+ .irq_unmask = eiger_enable_irq,
+ .irq_mask = eiger_disable_irq,
+ .irq_mask_ack = eiger_disable_irq,
};
static void
@@ -136,8 +138,8 @@
init_i8259a_irqs();
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 34f55e0..00341b7 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -63,34 +63,34 @@
*/
static void
-jensen_local_enable(unsigned int irq)
+jensen_local_enable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_enable_irq(1);
+ if (d->irq == 7)
+ i8259a_enable_irq(d);
}
static void
-jensen_local_disable(unsigned int irq)
+jensen_local_disable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_disable_irq(1);
+ if (d->irq == 7)
+ i8259a_disable_irq(d);
}
static void
-jensen_local_mask_ack(unsigned int irq)
+jensen_local_mask_ack(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_mask_and_ack_irq(1);
+ if (d->irq == 7)
+ i8259a_mask_and_ack_irq(d);
}
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
- .unmask = jensen_local_enable,
- .mask = jensen_local_disable,
- .mask_ack = jensen_local_mask_ack,
+ .irq_unmask = jensen_local_enable,
+ .irq_mask = jensen_local_disable,
+ .irq_mask_ack = jensen_local_mask_ack,
};
static void
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 2bfc9f1..e619107 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -104,9 +104,10 @@
}
static void
-io7_enable_irq(unsigned int irq)
+io7_enable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
+ unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@@ -115,7 +116,7 @@
__func__, irq);
return;
}
-
+
spin_lock(&io7->irq_lock);
*ctl |= 1UL << 24;
mb();
@@ -124,9 +125,10 @@
}
static void
-io7_disable_irq(unsigned int irq)
+io7_disable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
+ unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@@ -135,7 +137,7 @@
__func__, irq);
return;
}
-
+
spin_lock(&io7->irq_lock);
*ctl &= ~(1UL << 24);
mb();
@@ -144,35 +146,29 @@
}
static void
-marvel_irq_noop(unsigned int irq)
-{
- return;
-}
-
-static unsigned int
-marvel_irq_noop_return(unsigned int irq)
-{
- return 0;
+marvel_irq_noop(struct irq_data *d)
+{
+ return;
}
static struct irq_chip marvel_legacy_irq_type = {
.name = "LEGACY",
- .mask = marvel_irq_noop,
- .unmask = marvel_irq_noop,
+ .irq_mask = marvel_irq_noop,
+ .irq_unmask = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
.name = "LSI",
- .unmask = io7_enable_irq,
- .mask = io7_disable_irq,
- .mask_ack = io7_disable_irq,
+ .irq_unmask = io7_enable_irq,
+ .irq_mask = io7_disable_irq,
+ .irq_mask_ack = io7_disable_irq,
};
static struct irq_chip io7_msi_irq_type = {
.name = "MSI",
- .unmask = io7_enable_irq,
- .mask = io7_disable_irq,
- .ack = marvel_irq_noop,
+ .irq_unmask = io7_enable_irq,
+ .irq_mask = io7_disable_irq,
+ .irq_ack = marvel_irq_noop,
};
static void
@@ -280,8 +276,8 @@
/* Set up the lsi irqs. */
for (i = 0; i < 128; ++i) {
- irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
/* Disable the implemented irqs in hardware. */
@@ -294,8 +290,8 @@
/* Set up the msi irqs. */
for (i = 128; i < (128 + 512); ++i) {
- irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
for (i = 0; i < 16; ++i)
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index bcc1639..cf7f43d 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -43,22 +43,22 @@
}
static inline void
-mikasa_enable_irq(unsigned int irq)
+mikasa_enable_irq(struct irq_data *d)
{
- mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
+ mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
}
static void
-mikasa_disable_irq(unsigned int irq)
+mikasa_disable_irq(struct irq_data *d)
{
- mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
+ mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip mikasa_irq_type = {
.name = "MIKASA",
- .unmask = mikasa_enable_irq,
- .mask = mikasa_disable_irq,
- .mask_ack = mikasa_disable_irq,
+ .irq_unmask = mikasa_enable_irq,
+ .irq_mask = mikasa_disable_irq,
+ .irq_mask_ack = mikasa_disable_irq,
};
static void
@@ -98,8 +98,8 @@
mikasa_update_irq_hw(0);
for (i = 16; i < 32; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index e88f4ae..92bc188 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -48,22 +48,22 @@
}
static void
-noritake_enable_irq(unsigned int irq)
+noritake_enable_irq(struct irq_data *d)
{
- noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
+ noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
}
static void
-noritake_disable_irq(unsigned int irq)
+noritake_disable_irq(struct irq_data *d)
{
- noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
+ noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip noritake_irq_type = {
.name = "NORITAKE",
- .unmask = noritake_enable_irq,
- .mask = noritake_disable_irq,
- .mask_ack = noritake_disable_irq,
+ .irq_unmask = noritake_enable_irq,
+ .irq_mask = noritake_disable_irq,
+ .irq_mask_ack = noritake_disable_irq,
};
static void
@@ -127,8 +127,8 @@
outw(0, 0x54c);
for (i = 16; i < 48; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index 6a51364..936d414 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -56,9 +56,10 @@
(((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
static inline void
-rawhide_enable_irq(unsigned int irq)
+rawhide_enable_irq(struct irq_data *d)
{
unsigned int mask, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -76,9 +77,10 @@
}
static void
-rawhide_disable_irq(unsigned int irq)
+rawhide_disable_irq(struct irq_data *d)
{
unsigned int mask, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -96,9 +98,10 @@
}
static void
-rawhide_mask_and_ack_irq(unsigned int irq)
+rawhide_mask_and_ack_irq(struct irq_data *d)
{
unsigned int mask, mask1, hose;
+ unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@@ -123,9 +126,9 @@
static struct irq_chip rawhide_irq_type = {
.name = "RAWHIDE",
- .unmask = rawhide_enable_irq,
- .mask = rawhide_disable_irq,
- .mask_ack = rawhide_mask_and_ack_irq,
+ .irq_unmask = rawhide_enable_irq,
+ .irq_mask = rawhide_disable_irq,
+ .irq_mask_ack = rawhide_mask_and_ack_irq,
};
static void
@@ -177,8 +180,8 @@
}
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index 89e7e37e..cea22a6 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -47,22 +47,22 @@
}
static inline void
-rx164_enable_irq(unsigned int irq)
+rx164_enable_irq(struct irq_data *d)
{
- rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+ rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
-rx164_disable_irq(unsigned int irq)
+rx164_disable_irq(struct irq_data *d)
{
- rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+ rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static struct irq_chip rx164_irq_type = {
.name = "RX164",
- .unmask = rx164_enable_irq,
- .mask = rx164_disable_irq,
- .mask_ack = rx164_disable_irq,
+ .irq_unmask = rx164_enable_irq,
+ .irq_mask = rx164_disable_irq,
+ .irq_mask_ack = rx164_disable_irq,
};
static void
@@ -99,8 +99,8 @@
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 5c4423d..a349538 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -443,11 +443,11 @@
/* GENERIC irq routines */
static inline void
-sable_lynx_enable_irq(unsigned int irq)
+sable_lynx_enable_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -459,11 +459,11 @@
}
static void
-sable_lynx_disable_irq(unsigned int irq)
+sable_lynx_disable_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -475,11 +475,11 @@
}
static void
-sable_lynx_mask_and_ack_irq(unsigned int irq)
+sable_lynx_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit, mask;
- bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
+ bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@@ -489,9 +489,9 @@
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
- .unmask = sable_lynx_enable_irq,
- .mask = sable_lynx_disable_irq,
- .mask_ack = sable_lynx_mask_and_ack_irq,
+ .irq_unmask = sable_lynx_enable_irq,
+ .irq_mask = sable_lynx_disable_irq,
+ .irq_mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
@@ -518,9 +518,9 @@
long i;
for (i = 0; i < nr_of_irqs; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &sable_lynx_irq_type,
handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index f8a1e8a..42a5331 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -45,16 +45,18 @@
}
static inline void
-takara_enable_irq(unsigned int irq)
+takara_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
takara_update_irq_hw(irq, mask);
}
static void
-takara_disable_irq(unsigned int irq)
+takara_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
takara_update_irq_hw(irq, mask);
@@ -62,9 +64,9 @@
static struct irq_chip takara_irq_type = {
.name = "TAKARA",
- .unmask = takara_enable_irq,
- .mask = takara_disable_irq,
- .mask_ack = takara_disable_irq,
+ .irq_unmask = takara_enable_irq,
+ .irq_mask = takara_disable_irq,
+ .irq_mask_ack = takara_disable_irq,
};
static void
@@ -136,8 +138,8 @@
takara_update_irq_hw(i, -1);
for (i = 16; i < 128; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &takara_irq_type, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index e02494b..f6c108a 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -112,8 +112,9 @@
}
static inline void
-titan_enable_irq(unsigned int irq)
+titan_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask |= 1UL << (irq - 16);
titan_update_irq_hw(titan_cached_irq_mask);
@@ -121,8 +122,9 @@
}
static inline void
-titan_disable_irq(unsigned int irq)
+titan_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask &= ~(1UL << (irq - 16));
titan_update_irq_hw(titan_cached_irq_mask);
@@ -144,7 +146,8 @@
}
static int
-titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
{
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
@@ -175,17 +178,17 @@
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
+ irq_set_status_flags(i, IRQ_LEVEL);
}
}
static struct irq_chip titan_irq_type = {
- .name = "TITAN",
- .unmask = titan_enable_irq,
- .mask = titan_disable_irq,
- .mask_ack = titan_disable_irq,
- .set_affinity = titan_set_irq_affinity,
+ .name = "TITAN",
+ .irq_unmask = titan_enable_irq,
+ .irq_mask = titan_disable_irq,
+ .irq_mask_ack = titan_disable_irq,
+ .irq_set_affinity = titan_set_irq_affinity,
};
static irqreturn_t
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index eec5259..ca60a38 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -104,10 +104,12 @@
}
static void
-wildfire_enable_irq(unsigned int irq)
+wildfire_enable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_enable_irq(irq);
+ i8259a_enable_irq(d);
spin_lock(&wildfire_irq_lock);
set_bit(irq, &cached_irq_mask);
@@ -116,10 +118,12 @@
}
static void
-wildfire_disable_irq(unsigned int irq)
+wildfire_disable_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_disable_irq(irq);
+ i8259a_disable_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
@@ -128,10 +132,12 @@
}
static void
-wildfire_mask_and_ack_irq(unsigned int irq)
+wildfire_mask_and_ack_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
+
if (irq < 16)
- i8259a_mask_and_ack_irq(irq);
+ i8259a_mask_and_ack_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
@@ -141,9 +147,9 @@
static struct irq_chip wildfire_irq_type = {
.name = "WILDFIRE",
- .unmask = wildfire_enable_irq,
- .mask = wildfire_disable_irq,
- .mask_ack = wildfire_mask_and_ack_irq,
+ .irq_unmask = wildfire_enable_irq,
+ .irq_mask = wildfire_disable_irq,
+ .irq_mask_ack = wildfire_mask_and_ack_irq,
};
static void __init
@@ -177,21 +183,21 @@
for (i = 0; i < 16; ++i) {
if (i == 2)
continue;
- irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
- irq_to_desc(36+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(36+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
for (i = 40; i < 64; ++i) {
- irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
+ irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
- setup_irq(32+irq_bias, &isa_enable);
+ setup_irq(32+irq_bias, &isa_enable);
}
static void __init
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 26d45e5..38bf684 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -346,7 +346,7 @@
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -875,6 +875,16 @@
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_PWM
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
endchoice
#
@@ -1007,6 +1017,8 @@
source "arch/arm/mach-vexpress/Kconfig"
+source "arch/arm/mach-vt8500/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
@@ -1177,6 +1189,53 @@
visible impact on the overall performance or power consumption of the
processor.
+config ARM_ERRATA_751472
+ bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 751472 Cortex-A9 (prior
+ to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+ completion of a following broadcasted operation if the second
+ operation is received by a CPU before the ICIALLUIS has completed,
+ potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_753970
+ bool "ARM errata: cache sync operation may be faulty"
+ depends on CACHE_PL310
+ help
+ This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+ Under some condition the effect of cache sync operation on
+ the store buffer still remains when the operation completes.
+ This means that the store buffer is always asked to drain and
+ this prevents it from merging any further writes. The workaround
+ is to replace the normal offset of cache sync operation (0x730)
+ by another offset targeting an unmapped PL310 register 0x740.
+ This has the same effect as the cache sync operation: store buffer
+ drain and waiting for all buffers empty.
+
+config ARM_ERRATA_754322
+ bool "ARM errata: possible faulty MMU translations following an ASID switch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+ r3p*) erratum. A speculative memory access may cause a page table walk
+ which starts prior to an ASID switch but completes afterwards. This
+ can populate the micro-TLB with a stale entry which may be hit with
+ the new ASID. This workaround places two dsb instructions in the mm
+ switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+ bool "ARM errata: no automatic Store Buffer drain"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 754327 Cortex-A9 (prior to
+ r2p0) erratum. The Store Buffer does not have any automatic draining
+ mechanism and therefore a livelock may occur if an external agent
+ continuously polls a memory location waiting to observe an update.
+ This workaround defines cpu_relax() as smp_mb(), preventing correctly
+ written polling loops from denying visibility of updates to memory.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -1619,6 +1678,18 @@
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+config ZBOOT_ROM_MMCIF
+ bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ help
+ Say Y here to include experimental MMCIF loading code in the
+ ROM-able zImage. With this enabled it is possible to write the
+ the ROM-able zImage kernel image to an MMC card and boot the
+ kernel straight from the reset vector. At reset the processor
+ Mask ROM will load the first part of the the ROM-able zImage
+ which in turn loads the rest the kernel image to RAM using the
+ MMCIF hardware block.
+
config CMDLINE
string "Default kernel command string"
default ""
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1ad..cd56c91 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -15,7 +15,7 @@
LDFLAGS_vmlinux += --be8
endif
-OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
@@ -190,6 +190,7 @@
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
+machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index ab204db..c602896 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,3 +1,7 @@
font.c
-piggy.gz
+lib1funcs.S
+piggy.gzip
+piggy.lzo
+piggy.lzma
+vmlinux
vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0a8f748..5f3a161 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,9 +4,20 @@
# create a compressed vmlinuz image from the original vmlinux
#
+OBJS =
+
+# Ensure that mmcif loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+ifeq ($(CONFIG_ARCH_SH7372),y)
+OBJS += mmcif-sh7372.o
+endif
+endif
+
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
-OBJS = misc.o decompress.o
+OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
@@ -29,6 +40,10 @@
OBJS += head-sa1100.o
endif
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS += head-vt8500.o
+endif
+
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index 30973b7..c943d2e 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -25,6 +25,36 @@
/* load board-specific initialization code */
#include <mach/zboot.h>
+#ifdef CONFIG_ZBOOT_ROM_MMCIF
+ /* Load image from MMC */
+ adr sp, __tmp_stack + 128
+ ldr r0, __image_start
+ ldr r1, __image_end
+ subs r1, r1, r0
+ ldr r0, __load_base
+ bl mmcif_loader
+
+ /* Jump to loaded code */
+ ldr r0, __loaded
+ ldr r1, __image_start
+ sub r0, r0, r1
+ ldr r1, __load_base
+ add pc, r0, r1
+
+__image_start:
+ .long _start
+__image_end:
+ .long _got_end
+__load_base:
+ .long CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+__loaded:
+ .long __continue
+ .align
+__tmp_stack:
+ .space 128
+__continue:
+#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+
b 1f
__atags:@ tag #1
.long 12 @ tag->hdr.size = tag_size(tag_core);
diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S
new file mode 100644
index 0000000..1dc1e21
--- /dev/null
+++ b/arch/arm/boot/compressed/head-vt8500.S
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__VT8500_start:
+ @ Compare the SCC ID register against a list of known values
+ ldr r1, .SCCID
+ ldr r3, [r1]
+
+ @ VT8500 override
+ ldr r4, .VT8500SCC
+ cmp r3, r4
+ ldreq r7, .ID_BV07
+ beq .Lendvt8500
+
+ @ WM8505 override
+ ldr r4, .WM8505SCC
+ cmp r3, r4
+ ldreq r7, .ID_8505
+ beq .Lendvt8500
+
+ @ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+ .word 0xd8120000
+.VT8500SCC:
+ .word 0x34000102
+.WM8505SCC:
+ .word 0x34260103
+
+.ID_BV07:
+ .word MACH_TYPE_BV07
+.ID_8505:
+ .word MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
new file mode 100644
index 0000000..e6180af
--- /dev/null
+++ b/arch/arm/boot/compressed/mmcif-sh7372.c
@@ -0,0 +1,87 @@
+/*
+ * sh7372 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/mmcif.h>
+
+#define MMCIF_BASE (void __iomem *)0xe6bd0000
+
+#define PORT84CR (void __iomem *)0xe6050054
+#define PORT85CR (void __iomem *)0xe6050055
+#define PORT86CR (void __iomem *)0xe6050056
+#define PORT87CR (void __iomem *)0xe6050057
+#define PORT88CR (void __iomem *)0xe6050058
+#define PORT89CR (void __iomem *)0xe6050059
+#define PORT90CR (void __iomem *)0xe605005a
+#define PORT91CR (void __iomem *)0xe605005b
+#define PORT92CR (void __iomem *)0xe605005c
+#define PORT99CR (void __iomem *)0xe6050063
+
+#define SMSTPCR3 (void __iomem *)0xe615013c
+
+/* SH7372 specific MMCIF loader
+ *
+ * loads the zImage from an MMC card starting from block 1.
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 2 (=byte 1024) on the media
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an MMC card
+ * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+{
+ mmcif_init_progress();
+ mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+ /* Initialise MMC
+ * registers: PORT84CR-PORT92CR
+ * (MMCD0_0-MMCD0_7,MMCCMD0 Control)
+ * value: 0x04 - select function 4
+ */
+ __raw_writeb(0x04, PORT84CR);
+ __raw_writeb(0x04, PORT85CR);
+ __raw_writeb(0x04, PORT86CR);
+ __raw_writeb(0x04, PORT87CR);
+ __raw_writeb(0x04, PORT88CR);
+ __raw_writeb(0x04, PORT89CR);
+ __raw_writeb(0x04, PORT90CR);
+ __raw_writeb(0x04, PORT91CR);
+ __raw_writeb(0x04, PORT92CR);
+
+ /* Initialise MMC
+ * registers: PORT99CR (MMCCLK0 Control)
+ * value: 0x10 | 0x04 - enable output | select function 4
+ */
+ __raw_writeb(0x14, PORT99CR);
+
+ /* Enable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+ /* setup MMCIF hardware */
+ sh_mmcif_boot_init(MMCIF_BASE);
+
+ mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+ /* load kernel via MMCIF interface */
+ sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
+ (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
+
+
+ /* Disable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 778655f..ea5ee4d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -6,6 +6,8 @@
config ARM_VIC_NR
int
+ default 4 if ARCH_S5PV210
+ default 3 if ARCH_S5P6442 || ARCH_S5PC100
default 2
depends on ARM_VIC
help
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3acd8fa..18a5664 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -12,7 +12,7 @@
#include <linux/mm.h>
-#include <asm/glue.h>
+#include <asm/glue-cache.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
#include <asm/outercache.h>
@@ -20,123 +20,6 @@
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
/*
- * Cache Model
- * ===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
- defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
- defined(CONFIG_CPU_ARM1026)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_FA526)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE fa
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_MOHAWK)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE mohawk
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
-/*
* This flag is used to indicate that the page pointed to by a pte is clean
* and does not require cleaning before returning it to the user.
*/
@@ -249,19 +132,11 @@
* visible to the CPU.
*/
#define dmac_map_area cpu_cache.dma_map_area
-#define dmac_unmap_area cpu_cache.dma_unmap_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
-#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
-#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-
extern void __cpuc_flush_icache_all(void);
extern void __cpuc_flush_kern_all(void);
extern void __cpuc_flush_user_all(void);
@@ -276,10 +151,6 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_map_area __glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-
extern void dmac_map_area(const void *, size_t, int);
extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
deleted file mode 100644
index e2b5b0b..0000000
--- a/arch/arm/include/asm/cpu-multi32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/include/asm/cpu-multi32.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/page.h>
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
- /* MISC
- * get data abort address/flags
- */
- void (*_data_abort)(unsigned long pc);
- /*
- * Retrieve prefetch fault address
- */
- unsigned long (*_prefetch_abort)(unsigned long lr);
- /*
- * Set up any processor specifics
- */
- void (*_proc_init)(void);
- /*
- * Disable any processor specifics
- */
- void (*_proc_fin)(void);
- /*
- * Special stuff for a reset
- */
- void (*reset)(unsigned long addr) __attribute__((noreturn));
- /*
- * Idle the processor
- */
- int (*_do_idle)(void);
- /*
- * Processor architecture specific
- */
- /*
- * clean a virtual address range from the
- * D-cache without flushing the cache.
- */
- void (*dcache_clean_area)(void *addr, int size);
-
- /*
- * Set the page table
- */
- void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
- /*
- * Set a possibly extended PTE. Non-extended PTEs should
- * ignore 'ext'.
- */
- void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-} processor;
-
-#define cpu_proc_init() processor._proc_init()
-#define cpu_proc_fin() processor._proc_fin()
-#define cpu_reset(addr) processor.reset(addr)
-#define cpu_do_idle() processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
deleted file mode 100644
index f073a6d..0000000
--- a/arch/arm/include/asm/cpu-single.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/include/asm/cpu-single.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/*
- * Single CPU
- */
-#ifdef __STDC__
-#define __catify_fn(name,x) name##x
-#else
-#define __catify_fn(name,x) name/**/x
-#endif
-#define __cpu_fn(name,x) __catify_fn(name,x)
-
-/*
- * If we are supporting multiple CPUs, then we must use a table of
- * function pointers for this lot. Otherwise, we can optimise the
- * table away.
- */
-#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init)
-#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin)
-#define cpu_reset __cpu_fn(CPU_NAME,_reset)
-#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext)
-
-#include <asm/page.h>
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/arch/arm/include/asm/fncpy.h b/arch/arm/include/asm/fncpy.h
new file mode 100644
index 0000000..de53547
--- /dev/null
+++ b/arch/arm/include/asm/fncpy.h
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/include/asm/fncpy.h - helper macros for function body copying
+ *
+ * Copyright (C) 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These macros are intended for use when there is a need to copy a low-level
+ * function body into special memory.
+ *
+ * For example, when reconfiguring the SDRAM controller, the code doing the
+ * reconfiguration may need to run from SRAM.
+ *
+ * NOTE: that the copied function body must be entirely self-contained and
+ * position-independent in order for this to work properly.
+ *
+ * NOTE: in order for embedded literals and data to get referenced correctly,
+ * the alignment of functions must be preserved when copying. To ensure this,
+ * the source and destination addresses for fncpy() must be aligned to a
+ * multiple of 8 bytes: you will be get a BUG() if this condition is not met.
+ * You will typically need a ".align 3" directive in the assembler where the
+ * function to be copied is defined, and ensure that your allocator for the
+ * destination buffer returns 8-byte-aligned pointers.
+ *
+ * Typical usage example:
+ *
+ * extern int f(args);
+ * extern uint32_t size_of_f;
+ * int (*copied_f)(args);
+ * void *sram_buffer;
+ *
+ * copied_f = fncpy(sram_buffer, &f, size_of_f);
+ *
+ * ... later, call the function: ...
+ *
+ * copied_f(args);
+ *
+ * The size of the function to be copied can't be determined from C:
+ * this must be determined by other means, such as adding assmbler directives
+ * in the file where f is defined.
+ */
+
+#ifndef __ASM_FNCPY_H
+#define __ASM_FNCPY_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Minimum alignment requirement for the source and destination addresses
+ * for function copying.
+ */
+#define FNCPY_ALIGN 8
+
+#define fncpy(dest_buf, funcp, size) ({ \
+ uintptr_t __funcp_address; \
+ typeof(funcp) __result; \
+ \
+ asm("" : "=r" (__funcp_address) : "0" (funcp)); \
+ \
+ /* \
+ * Ensure alignment of source and destination addresses, \
+ * disregarding the function's Thumb bit: \
+ */ \
+ BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) || \
+ (__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1))); \
+ \
+ memcpy(dest_buf, (void const *)(__funcp_address & ~1), size); \
+ flush_icache_range((unsigned long)(dest_buf), \
+ (unsigned long)(dest_buf) + (size)); \
+ \
+ asm("" : "=r" (__result) \
+ : "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1))); \
+ \
+ __result; \
+})
+
+#endif /* !__ASM_FNCPY_H */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
new file mode 100644
index 0000000..0591d35
--- /dev/null
+++ b/arch/arm/include/asm/glue-cache.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/include/asm/glue-cache.h
+ *
+ * Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_CACHE_H
+#define ASM_GLUE_CACHE_H
+
+#include <asm/glue.h>
+
+/*
+ * Cache Model
+ * ===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+ defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+ defined(CONFIG_CPU_ARM1026)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE fa
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+#ifndef MULTI_CACHE
+#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
+#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h
new file mode 100644
index 0000000..354d571
--- /dev/null
+++ b/arch/arm/include/asm/glue-df.h
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/include/asm/glue-df.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_DF_H
+#define ASM_GLUE_DF_H
+
+#include <asm/glue.h>
+
+/*
+ * Data Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * arm6 - ARM6 style
+ * arm7 - ARM7 style
+ * v4_early - ARMv4 without Thumb early abort handler
+ * v4t_late - ARMv4 with Thumb late abort handler
+ * v4t_early - ARMv4 with Thumb early abort handler
+ * v5tej_early - ARMv5 with Thumb and Java early abort handler
+ * xscale - ARMv5 with Thumb with Xscale extensions
+ * v6_early - ARMv6 generic early abort handler
+ * v7_early - ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-pf.h b/arch/arm/include/asm/glue-pf.h
new file mode 100644
index 0000000..d385f37
--- /dev/null
+++ b/arch/arm/include/asm/glue-pf.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/include/asm/glue-pf.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PF_H
+#define ASM_GLUE_PF_H
+
+#include <asm/glue.h>
+
+/*
+ * Prefetch Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * legacy - no IFSR, no IFAR
+ * v6 - ARMv6: IFSR, no IFAR
+ * v7 - ARMv7: IFSR and IFAR
+ */
+
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v7_pabort
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h
new file mode 100644
index 0000000..6469521
--- /dev/null
+++ b/arch/arm/include/asm/glue-proc.h
@@ -0,0 +1,264 @@
+/*
+ * arch/arm/include/asm/glue-proc.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PROC_H
+#define ASM_GLUE_PROC_H
+
+#include <asm/glue.h>
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_ARM610
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM7TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM710
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm720
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm740
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm9tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm920
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM922T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm922
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_fa526
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm925
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm926
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm940
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm946
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA110
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa110
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa1100
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020e
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1022
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1026
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xscale
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xsc3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_feroceon
+# endif
+#endif
+
+#ifdef CONFIG_CPU_V6
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_V7
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v7
+# endif
+#endif
+
+#ifndef MULTI_CPU
+#define cpu_proc_init __glue(CPU_NAME,_proc_init)
+#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
+#define cpu_reset __glue(CPU_NAME,_reset)
+#define cpu_do_idle __glue(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext)
+#define cpu_suspend_size __glue(CPU_NAME,_suspend_size)
+#define cpu_do_suspend __glue(CPU_NAME,_do_suspend)
+#define cpu_do_resume __glue(CPU_NAME,_do_resume)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index 234a3fc..0ec35d1 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -15,7 +15,6 @@
*/
#ifdef __KERNEL__
-
#ifdef __STDC__
#define ____glue(name,fn) name##fn
#else
@@ -23,141 +22,4 @@
#endif
#define __glue(name,fn) ____glue(name,fn)
-
-
-/*
- * Data Abort Model
- * ================
- *
- * We have the following to choose from:
- * arm6 - ARM6 style
- * arm7 - ARM7 style
- * v4_early - ARMv4 without Thumb early abort handler
- * v4t_late - ARMv4 with Thumb late abort handler
- * v4t_early - ARMv4 with Thumb early abort handler
- * v5tej_early - ARMv5 with Thumb and Java early abort handler
- * xscale - ARMv5 with Thumb with Xscale extensions
- * v6_early - ARMv6 generic early abort handler
- * v7_early - ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-/*
- * Prefetch Abort Model
- * ================
- *
- * We have the following to choose from:
- * legacy - no IFSR, no IFAR
- * v6 - ARMv6: IFSR, no IFAR
- * v7 - ARMv7: IFSR and IFAR
- */
-
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_LEGACY
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER legacy_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V6
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v6_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V7
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v7_pabort
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 5aeec1e..16bd480 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -36,6 +36,7 @@
#define L2X0_RAW_INTR_STAT 0x21C
#define L2X0_INTR_CLEAR 0x220
#define L2X0_CACHE_SYNC 0x730
+#define L2X0_DUMMY_REG 0x740
#define L2X0_INV_LINE_PA 0x770
#define L2X0_INV_WAY 0x77C
#define L2X0_CLEAN_LINE_PA 0x7B0
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index 721847d..e0d1c0c 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -58,6 +58,9 @@
static inline void sysctl_soft_reset(void __iomem *base)
{
+ /* switch to slow mode */
+ writel(0x2, base + SCCTRL);
+
/* writing any value to SCSYSSTAT reg will reset system */
writel(0, base + SCSYSSTAT);
}
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 3a0893a..bf13b81 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -15,10 +15,6 @@
struct sys_timer;
struct machine_desc {
- /*
- * Note! The first two elements are used
- * by assembler code in head.S, head-common.S
- */
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 9763be0..22de005 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -10,6 +10,8 @@
#ifndef _ASMARM_PGALLOC_H
#define _ASMARM_PGALLOC_H
+#include <linux/pagemap.h>
+
#include <asm/domain.h>
#include <asm/pgtable-hwdef.h>
#include <asm/processor.h>
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 8fdae9b..8ec535e 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -13,250 +13,86 @@
#ifdef __KERNEL__
-
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
-
-/*
- * CPU_NAME - the prefix for CPU related functions
- */
-
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM7TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM720T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm720
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM740T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm740
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM9TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm9tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM920T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm920
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM922T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm922
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FA526
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_fa526
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM925T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm925
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM926T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm926
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM940T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm940
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM946E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm946
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA110
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa110
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa1100
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1022
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1022
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1026
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1026
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xscale
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xsc3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_MOHAWK
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_mohawk
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FEROCEON
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V6
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V7
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v7
-# endif
-#endif
+#include <asm/glue-proc.h>
+#include <asm/page.h>
#ifndef __ASSEMBLY__
+struct mm_struct;
+
+/*
+ * Don't change this structure - ASM code relies on it.
+ */
+extern struct processor {
+ /* MISC
+ * get data abort address/flags
+ */
+ void (*_data_abort)(unsigned long pc);
+ /*
+ * Retrieve prefetch fault address
+ */
+ unsigned long (*_prefetch_abort)(unsigned long lr);
+ /*
+ * Set up any processor specifics
+ */
+ void (*_proc_init)(void);
+ /*
+ * Disable any processor specifics
+ */
+ void (*_proc_fin)(void);
+ /*
+ * Special stuff for a reset
+ */
+ void (*reset)(unsigned long addr) __attribute__((noreturn));
+ /*
+ * Idle the processor
+ */
+ int (*_do_idle)(void);
+ /*
+ * Processor architecture specific
+ */
+ /*
+ * clean a virtual address range from the
+ * D-cache without flushing the cache.
+ */
+ void (*dcache_clean_area)(void *addr, int size);
+
+ /*
+ * Set the page table
+ */
+ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+ /*
+ * Set a possibly extended PTE. Non-extended PTEs should
+ * ignore 'ext'.
+ */
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+
+ /* Suspend/resume */
+ unsigned int suspend_size;
+ void (*do_suspend)(void *);
+ void (*do_resume)(void *);
+} processor;
+
#ifndef MULTI_CPU
-#include <asm/cpu-single.h>
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#else
-#include <asm/cpu-multi32.h>
+#define cpu_proc_init() processor._proc_init()
+#define cpu_proc_fin() processor._proc_fin()
+#define cpu_reset(addr) processor.reset(addr)
+#define cpu_do_idle() processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
#endif
+extern void cpu_resume(void);
+
#include <asm/memory.h>
#ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 67357ba..7a1f03c 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -95,7 +95,7 @@
unsigned long get_wchan(struct task_struct *p);
-#if __LINUX_ARM_ARCH__ == 6
+#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() smp_mb()
#else
#define cpu_relax() barrier()
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
index 2376835..4eb6d00 100644
--- a/arch/arm/include/asm/smp_scu.h
+++ b/arch/arm/include/asm/smp_scu.h
@@ -1,7 +1,14 @@
#ifndef __ASMARM_ARCH_SCU_H
#define __ASMARM_ARCH_SCU_H
+#define SCU_PM_NORMAL 0
+#define SCU_PM_DORMANT 2
+#define SCU_PM_POWEROFF 3
+
+#ifndef __ASSEMBLER__
unsigned int scu_get_core_count(void __iomem *);
void scu_enable(void __iomem *);
+int scu_power_mode(void __iomem *, unsigned int);
+#endif
#endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index f41a6f5..82dfe5d 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -18,16 +18,34 @@
#define __ASMARM_TLB_H
#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
#ifndef CONFIG_MMU
#include <linux/pagemap.h>
+
+#define tlb_flush(tlb) ((void) tlb)
+
#include <asm-generic/tlb.h>
#else /* !CONFIG_MMU */
+#include <linux/swap.h>
#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * We need to delay page freeing for SMP as other CPUs can access pages
+ * which have been removed but not yet had their TLB entries invalidated.
+ * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
+ * we need to apply this same delaying tactic to ensure correct operation.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
+#define tlb_fast_mode(tlb) 0
+#define FREE_PTE_NR 500
+#else
+#define tlb_fast_mode(tlb) 1
+#define FREE_PTE_NR 0
+#endif
/*
* TLB handling. This allows us to remove pages from the page
@@ -36,12 +54,58 @@
struct mmu_gather {
struct mm_struct *mm;
unsigned int fullmm;
+ struct vm_area_struct *vma;
unsigned long range_start;
unsigned long range_end;
+ unsigned int nr;
+ struct page *pages[FREE_PTE_NR];
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+/*
+ * This is unnecessarily complex. There's three ways the TLB shootdown
+ * code is used:
+ * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region().
+ * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
+ * tlb->vma will be non-NULL.
+ * 2. Unmapping all vmas. See exit_mmap().
+ * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
+ * tlb->vma will be non-NULL. Additionally, page tables will be freed.
+ * 3. Unmapping argument pages. See shift_arg_pages().
+ * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
+ * tlb->vma will be NULL.
+ */
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+ if (tlb->fullmm || !tlb->vma)
+ flush_tlb_mm(tlb->mm);
+ else if (tlb->range_end > 0) {
+ flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
+ tlb->range_start = TASK_SIZE;
+ tlb->range_end = 0;
+ }
+}
+
+static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
+{
+ if (!tlb->fullmm) {
+ if (addr < tlb->range_start)
+ tlb->range_start = addr;
+ if (addr + PAGE_SIZE > tlb->range_end)
+ tlb->range_end = addr + PAGE_SIZE;
+ }
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+ tlb_flush(tlb);
+ if (!tlb_fast_mode(tlb)) {
+ free_pages_and_swap_cache(tlb->pages, tlb->nr);
+ tlb->nr = 0;
+ }
+}
+
static inline struct mmu_gather *
tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
@@ -49,6 +113,8 @@
tlb->mm = mm;
tlb->fullmm = full_mm_flush;
+ tlb->vma = NULL;
+ tlb->nr = 0;
return tlb;
}
@@ -56,8 +122,7 @@
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- if (tlb->fullmm)
- flush_tlb_mm(tlb->mm);
+ tlb_flush_mmu(tlb);
/* keep the page table cache within bounds */
check_pgt_cache();
@@ -71,12 +136,7 @@
static inline void
tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
{
- if (!tlb->fullmm) {
- if (addr < tlb->range_start)
- tlb->range_start = addr;
- if (addr + PAGE_SIZE > tlb->range_end)
- tlb->range_end = addr + PAGE_SIZE;
- }
+ tlb_add_flush(tlb, addr);
}
/*
@@ -89,6 +149,7 @@
{
if (!tlb->fullmm) {
flush_cache_range(vma, vma->vm_start, vma->vm_end);
+ tlb->vma = vma;
tlb->range_start = TASK_SIZE;
tlb->range_end = 0;
}
@@ -97,12 +158,30 @@
static inline void
tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm && tlb->range_end > 0)
- flush_tlb_range(vma, tlb->range_start, tlb->range_end);
+ if (!tlb->fullmm)
+ tlb_flush(tlb);
}
-#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+ if (tlb_fast_mode(tlb)) {
+ free_page_and_swap_cache(page);
+ } else {
+ tlb->pages[tlb->nr++] = page;
+ if (tlb->nr >= FREE_PTE_NR)
+ tlb_flush_mmu(tlb);
+ }
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+ unsigned long addr)
+{
+ pgtable_page_dtor(pte);
+ tlb_add_flush(tlb, addr);
+ tlb_remove_page(tlb, pte);
+}
+
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
#define tlb_migrate_finish(mm) do { } while (0)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index ce7378e..d2005de 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -10,12 +10,7 @@
#ifndef _ASMARM_TLBFLUSH_H
#define _ASMARM_TLBFLUSH_H
-
-#ifndef CONFIG_MMU
-
-#define tlb_flush(tlb) ((void) tlb)
-
-#else /* CONFIG_MMU */
+#ifdef CONFIG_MMU
#include <asm/glue.h>
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 185ee82..74554f1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
+obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 82da661..927522c 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -13,6 +13,9 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@@ -114,6 +117,14 @@
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+#ifdef MULTI_CPU
+ DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
+ DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
+ DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
+#endif
+#ifdef MULTI_CACHE
+ DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
+#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 2b46fea..e8d8856 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -16,7 +16,8 @@
*/
#include <asm/memory.h>
-#include <asm/glue.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index d600bd3..44b84fe 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -836,9 +836,11 @@
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *info)
{
- int i;
+ int i, cpu = smp_processor_id();
+ u32 dbg_power;
+ cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
@@ -850,6 +852,17 @@
*/
if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
/*
+ * Ensure sticky power-down is clear (i.e. debug logic is
+ * powered up).
+ */
+ asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 0) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(cpumask, cpumask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
* Unconditionally clear the lock by writing a value
* other than 0xC5ACCE55 to the access register.
*/
@@ -887,6 +900,7 @@
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
+ cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
@@ -911,7 +925,13 @@
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, NULL, 1);
+ on_each_cpu(reset_ctrl_regs, &cpumask, 1);
+ if (!cpumask_empty(&cpumask)) {
+ core_num_brps = 0;
+ core_num_reserved_brps = 0;
+ core_num_wrps = 0;
+ return 0;
+ }
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 2c1f005..8f6ed43 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1437,7 +1437,7 @@
return space_cccc_1100_010x(insn, asi);
- } else if ((insn & 0x0e000000) == 0x0c400000) {
+ } else if ((insn & 0x0e000000) == 0x0c000000) {
return space_cccc_110x(insn, asi);
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index b8af96e..2c79eec 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -97,28 +97,34 @@
irq, cpu);
return err;
#else
- return 0;
+ return -EINVAL;
#endif
}
static int
init_cpu_pmu(void)
{
- int i, err = 0;
+ int i, irqs, err = 0;
struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
- if (!pdev) {
- err = -ENODEV;
- goto out;
- }
+ if (!pdev)
+ return -ENODEV;
- for (i = 0; i < pdev->num_resources; ++i) {
+ irqs = pdev->num_resources;
+
+ /*
+ * If we have a single PMU interrupt that we can't shift, assume that
+ * we're running on a uniprocessor machine and continue.
+ */
+ if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
+ return 0;
+
+ for (i = 0; i < irqs; ++i) {
err = set_irq_affinity(platform_get_irq(pdev, i), i);
if (err)
break;
}
-out:
return err;
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 19c6816..b13e70f 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -996,10 +996,10 @@
while (!(arch_ctrl.len & 0x1))
arch_ctrl.len >>= 1;
- if (idx & 0x1)
- reg = encode_ctrl_reg(arch_ctrl);
- else
+ if (num & 0x1)
reg = bp->attr.bp_addr;
+ else
+ reg = encode_ctrl_reg(arch_ctrl);
}
put:
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 420b8d6..5ea4fb7 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -226,8 +226,8 @@
* Register 0 and check for VMSAv7 or PMSAv7 */
asm("mrc p15, 0, %0, c0, c1, 4"
: "=r" (mmfr0));
- if ((mmfr0 & 0x0000000f) == 0x00000003 ||
- (mmfr0 & 0x000000f0) == 0x00000030)
+ if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
+ (mmfr0 & 0x000000f0) >= 0x00000030)
cpu_arch = CPU_ARCH_ARMv7;
else if ((mmfr0 & 0x0000000f) == 0x00000002 ||
(mmfr0 & 0x000000f0) == 0x00000020)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 907d5a6..abaf844 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -474,7 +474,9 @@
unsigned long handler = (unsigned long)ka->sa.sa_handler;
unsigned long retcode;
int thumb = 0;
- unsigned long cpsr = regs->ARM_cpsr & ~PSR_f;
+ unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT);
+
+ cpsr |= PSR_ENDSTATE;
/*
* Maybe we need to deliver a 32-bit signal to a 26-bit task.
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
new file mode 100644
index 0000000..bfad698
--- /dev/null
+++ b/arch/arm/kernel/sleep.S
@@ -0,0 +1,134 @@
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/glue-cache.h>
+#include <asm/glue-proc.h>
+#include <asm/system.h>
+ .text
+
+/*
+ * Save CPU state for a suspend
+ * r1 = v:p offset
+ * r3 = virtual return function
+ * Note: sp is decremented to allocate space for CPU state on stack
+ * r0-r3,r9,r10,lr corrupted
+ */
+ENTRY(cpu_suspend)
+ mov r9, lr
+#ifdef MULTI_CPU
+ ldr r10, =processor
+ mov r2, sp @ current virtual SP
+ ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+ ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ add ip, ip, r1 @ convert resume fn to phys
+ stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ mov lr, pc
+ ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
+#else
+ mov r2, sp @ current virtual SP
+ ldr r0, =cpu_suspend_size
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ bl cpu_do_suspend
+#endif
+
+ @ flush data cache
+#ifdef MULTI_CACHE
+ ldr r10, =cpu_cache
+ mov lr, r9
+ ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
+#else
+ mov lr, r9
+ b __cpuc_flush_kern_all
+#endif
+ENDPROC(cpu_suspend)
+ .ltorg
+
+/*
+ * r0 = control register value
+ * r1 = v:p offset (preserved by cpu_do_resume)
+ * r2 = phys page table base
+ * r3 = L1 section flags
+ */
+ENTRY(cpu_resume_mmu)
+ adr r4, cpu_resume_turn_mmu_on
+ mov r4, r4, lsr #20
+ orr r3, r3, r4, lsl #20
+ ldr r5, [r2, r4, lsl #2] @ save old mapping
+ str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
+ sub r2, r2, r1
+ ldr r3, =cpu_resume_after_mmu
+ bic r1, r0, #CR_C @ ensure D-cache is disabled
+ b cpu_resume_turn_mmu_on
+ENDPROC(cpu_resume_mmu)
+ .ltorg
+ .align 5
+cpu_resume_turn_mmu_on:
+ mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r1, c0, c0, 0 @ read id reg
+ mov r1, r1
+ mov r1, r1
+ mov pc, r3 @ jump to virtual address
+ENDPROC(cpu_resume_turn_mmu_on)
+cpu_resume_after_mmu:
+ str r5, [r2, r4, lsl #2] @ restore old mapping
+ mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
+ mov pc, lr
+ENDPROC(cpu_resume_after_mmu)
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow sleep_save_sp to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ .align
+ENTRY(cpu_resume)
+#ifdef CONFIG_SMP
+ adr r0, sleep_save_sp
+ ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
+ ALT_UP(mov r1, #0)
+ and r1, r1, #15
+ ldr r0, [r0, r1, lsl #2] @ stack phys addr
+#else
+ ldr r0, sleep_save_sp @ stack phys addr
+#endif
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+#ifdef MULTI_CPU
+ ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn
+#else
+ ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn
+ b cpu_do_resume
+#endif
+ENDPROC(cpu_resume)
+
+sleep_save_sp:
+ .rept CONFIG_NR_CPUS
+ .long 0 @ preserve stack phys ptr here
+ .endr
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 9ab4149..a1e757c 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -50,3 +50,26 @@
*/
flush_cache_all();
}
+
+/*
+ * Set the executing CPUs power mode as defined. This will be in
+ * preparation for it executing a WFI instruction.
+ *
+ * This function must be called with preemption disabled, and as it
+ * has the side effect of disabling coherency, caches must have been
+ * flushed. Interrupts must also have been disabled.
+ */
+int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+ unsigned int val;
+ int cpu = smp_processor_id();
+
+ if (mode > 3 || mode == 1 || cpu > 3)
+ return -EINVAL;
+
+ val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+ val |= mode;
+ __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+
+ return 0;
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 86b66f3..6146279 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -21,6 +21,12 @@
#define ARM_CPU_KEEP(x)
#endif
+#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
+#define ARM_EXIT_KEEP(x) x
+#else
+#define ARM_EXIT_KEEP(x)
+#endif
+
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -43,6 +49,7 @@
_sinittext = .;
HEAD_TEXT
INIT_TEXT
+ ARM_EXIT_KEEP(EXIT_TEXT)
_einittext = .;
ARM_CPU_DISCARD(PROC_INFO)
__arch_info_begin = .;
@@ -67,6 +74,7 @@
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
+ ARM_EXIT_KEEP(EXIT_DATA)
#endif
}
@@ -162,6 +170,7 @@
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
+ ARM_EXIT_KEEP(EXIT_DATA)
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
@@ -247,6 +256,8 @@
}
#endif
+ NOTES
+
BSS_SECTION(0, 0, 0)
_end = .;
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 343de73..4a68c2b 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -132,7 +132,7 @@
return ret;
}
-static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+static int davinci_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 9eec630..beda8a4 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -480,8 +480,15 @@
.resource = da850_mcasp_resources,
};
+struct platform_device davinci_pcm_device = {
+ .name = "davinci-pcm-audio",
+ .id = -1,
+};
+
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
+ platform_device_register(&davinci_pcm_device);
+
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
index d102986..3fa3e28 100644
--- a/arch/arm/mach-davinci/gpio-tnetv107x.c
+++ b/arch/arm/mach-davinci/gpio-tnetv107x.c
@@ -58,7 +58,7 @@
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(®s->enable, gpio);
+ gpio_reg_set_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -74,7 +74,7 @@
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_clear_bit(®s->enable, gpio);
+ gpio_reg_clear_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
@@ -88,7 +88,7 @@
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(®s->direction, gpio);
+ gpio_reg_set_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -106,11 +106,11 @@
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(®s->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(®s->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
- gpio_reg_clear_bit(®s->direction, gpio);
+ gpio_reg_clear_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
@@ -124,7 +124,7 @@
unsigned gpio = chip->base + offset;
int ret;
- ret = gpio_reg_get_bit(®s->data_in, gpio);
+ ret = gpio_reg_get_bit(regs->data_in, gpio);
return ret ? 1 : 0;
}
@@ -140,9 +140,9 @@
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(®s->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(®s->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
index 730c49d..14a5048 100644
--- a/arch/arm/mach-davinci/include/mach/clkdev.h
+++ b/arch/arm/mach-davinci/include/mach/clkdev.h
@@ -1,6 +1,8 @@
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
+struct clk;
+
static inline int __clk_get(struct clk *clk)
{
return 1;
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b04316..9969bb1 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -30,8 +30,13 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+
+#include <sound/cs4271.h>
#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -93,6 +98,83 @@
/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+ .gpio_nreset = -EINVAL, /* filled in later */
+};
+
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+ GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+ .setup = edb93xx_cs4271_hw_setup,
+ .cleanup = edb93xx_cs4271_hw_cleanup,
+ .cs_control = edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &edb93xx_cs4271_data,
+ .controller_data = &edb93xx_cs4271_hw,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (machine_is_edb9301() || machine_is_edb9302())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+ else if (machine_is_edb9315a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+ ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static int __init edb93xx_has_audio(void)
+{
+ return (machine_is_edb9301() || machine_is_edb9302() ||
+ machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ }
+}
+
+
+/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
@@ -111,13 +193,47 @@
}
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+ /* These platforms have an ep93xx with video capability */
+ return machine_is_edb9307() || machine_is_edb9307a() ||
+ machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+ if (!edb93xx_has_fb())
+ return;
+
+ if (machine_is_edb9307a() || machine_is_edb9315a())
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+ else
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+ ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
+ edb93xx_register_fb();
}
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index bec34b8..a889fa7 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -61,7 +61,7 @@
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
@@ -75,7 +75,6 @@
__raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
@@ -335,6 +334,20 @@
local_irq_restore(flags);
}
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+ unsigned offset, unsigned debounce)
+{
+ int gpio = chip->base + offset;
+ int irq = gpio_to_irq(gpio);
+
+ if (irq < 0)
+ return -EINVAL;
+
+ ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+
+ return 0;
+}
+
static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
@@ -434,6 +447,18 @@
EP93XX_SYSCON_DEVCFG_GONIDE |
EP93XX_SYSCON_DEVCFG_HONIDE);
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
- gpiochip_add(&ep93xx_gpio_banks[i].chip);
+ for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+ struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
+
+ /*
+ * Ports A, B, and F support input debouncing when
+ * used as interrupts.
+ */
+ if (!strcmp(chip->label, "A") ||
+ !strcmp(chip->label, "B") ||
+ !strcmp(chip->label, "F"))
+ chip->set_debounce = ep93xx_gpio_set_debounce;
+
+ gpiochip_add(chip);
+ }
}
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index c991b14..c57152c 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -99,8 +99,6 @@
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
-
/* new generic GPIO API - see Documentation/gpio.txt */
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index bc5e83f..a921fe9 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -4,10 +4,11 @@
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/spinlock.h>
#include <asm/irq.h>
@@ -16,32 +17,76 @@
#include "common.h"
-/*
- * Footbridge timer 1 support.
- */
-static unsigned long timer1_latch;
-
-static unsigned long timer1_gettimeoffset (void)
+static cycle_t cksrc_dc21285_read(struct clocksource *cs)
{
- unsigned long value = timer1_latch - *CSR_TIMER1_VALUE;
-
- return ((tick_nsec / 1000) * value) / timer1_latch;
+ return cs->mask - *CSR_TIMER2_VALUE;
}
-static irqreturn_t
-timer1_interrupt(int irq, void *dev_id)
+static int cksrc_dc21285_enable(struct clocksource *cs)
{
+ *CSR_TIMER2_LOAD = cs->mask;
+ *CSR_TIMER2_CLR = 0;
+ *CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+ return 0;
+}
+
+static int cksrc_dc21285_disable(struct clocksource *cs)
+{
+ *CSR_TIMER2_CNTL = 0;
+}
+
+static struct clocksource cksrc_dc21285 = {
+ .name = "dc21285_timer2",
+ .rating = 200,
+ .read = cksrc_dc21285_read,
+ .enable = cksrc_dc21285_enable,
+ .disable = cksrc_dc21285_disable,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *c)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ *CSR_TIMER1_CLR = 0;
+ *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ break;
+
+ default:
+ *CSR_TIMER1_CNTL = 0;
+ break;
+ }
+}
+
+static struct clock_event_device ckevt_dc21285 = {
+ .name = "dc21285_timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 200,
+ .irq = IRQ_TIMER1,
+ .set_mode = ckevt_dc21285_set_mode,
+};
+
+static irqreturn_t timer1_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+
*CSR_TIMER1_CLR = 0;
- timer_tick();
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
static struct irqaction footbridge_timer_irq = {
- .name = "Timer1 timer tick",
+ .name = "dc21285_timer1",
.handler = timer1_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &ckevt_dc21285,
};
/*
@@ -49,16 +94,19 @@
*/
static void __init footbridge_timer_init(void)
{
- timer1_latch = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ struct clock_event_device *ce = &ckevt_dc21285;
- *CSR_TIMER1_CLR = 0;
- *CSR_TIMER1_LOAD = timer1_latch;
- *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
+ clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
- setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
+ setup_irq(ce->irq, &footbridge_timer_irq);
+
+ clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
+ ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
+ ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+
+ clockevents_register_device(ce);
}
struct sys_timer footbridge_timer = {
.init = footbridge_timer_init,
- .offset = timer1_gettimeoffset,
};
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index f488fa2..441c6ce 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -4,10 +4,13 @@
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/timex.h>
#include <asm/irq.h>
@@ -15,77 +18,115 @@
#include "common.h"
-/*
- * ISA timer tick support
- */
-#define mSEC_10_from_14 ((14318180 + 100) / 200)
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
-static unsigned long isa_gettimeoffset(void)
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
+
+static cycle_t pit_read(struct clocksource *cs)
{
+ unsigned long flags;
+ static int old_count;
+ static u32 old_jifs;
int count;
+ u32 jifs;
- static int count_p = (mSEC_10_from_14/6); /* for the first call after boot */
- static unsigned long jiffies_p = 0;
+ raw_local_irq_save(flags);
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
+ jifs = jiffies;
+ outb_p(0x00, PIT_MODE); /* latch the count */
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb_p(PIT_CH0) << 8;
- /* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
- count = inb_p(0x40); /* read the latched count */
+ old_count = count;
+ old_jifs = jifs;
- /*
- * We do this guaranteed double memory access instead of a _p
- * postfix in the previous port access. Wheee, hackady hack
- */
- jiffies_t = jiffies;
+ raw_local_irq_restore(flags);
- count |= inb_p(0x40) << 8;
+ count = (PIT_LATCH - 1) - count;
- /* Detect timer underflows. If we haven't had a timer tick since
- the last time we were called, and time is apparently going
- backwards, the counter must have wrapped during this routine. */
- if ((jiffies_t == jiffies_p) && (count > count_p))
- count -= (mSEC_10_from_14/6);
- else
- jiffies_p = jiffies_t;
-
- count_p = count;
-
- count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000);
- count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
-
- return count;
+ return (cycle_t)(jifs * PIT_LATCH) + count;
}
-static irqreturn_t
-isa_timer_interrupt(int irq, void *dev_id)
+static struct clocksource pit_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = pit_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static void pit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- timer_tick();
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ outb_p(0x34, PIT_MODE);
+ outb_p(PIT_LATCH & 0xff, PIT_CH0);
+ outb_p(PIT_LATCH >> 8, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ outb_p(0x30, PIT_MODE);
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static int pit_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ return 0;
+}
+
+static struct clock_event_device pit_ce = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = pit_set_mode,
+ .set_next_event = pit_set_next_event,
+ .shift = 32,
+};
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
-static struct irqaction isa_timer_irq = {
- .name = "ISA timer tick",
- .handler = isa_timer_interrupt,
+static struct irqaction pit_timer_irq = {
+ .name = "pit",
+ .handler = pit_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &pit_ce,
};
static void __init isa_timer_init(void)
{
- /* enable PIT timer */
- /* set for periodic (4) and LSB/MSB write (0x30) */
- outb(0x34, 0x43);
- outb((mSEC_10_from_14/6) & 0xFF, 0x40);
- outb((mSEC_10_from_14/6) >> 8, 0x40);
+ pit_ce.cpumask = cpumask_of(smp_processor_id());
+ pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
+ pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
+ pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
- setup_irq(IRQ_ISA_TIMER, &isa_timer_irq);
+ clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
+
+ setup_irq(pit_ce.irq, &pit_timer_irq);
+ clockevents_register_device(&pit_ce);
}
struct sys_timer isa_timer = {
.init = isa_timer_init,
- .offset = isa_gettimeoffset,
};
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 2ba096d..0cf7a07 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -98,6 +98,7 @@
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
+ platform_register_rtc();
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index a9a0d8b..4fa09af 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -82,6 +82,7 @@
platform_register_pflash(SZ_8M, NULL, 0);
platform_device_register(&rut1xx_leds);
platform_device_register(&rut1xx_keys_device);
+ platform_register_rtc();
}
MACHINE_START(RUT100, "Teltonika RUT100")
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 8b88d50..af7b68a 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -130,6 +130,7 @@
wbd111_num_partitions);
platform_device_register(&wbd111_leds_device);
platform_device_register(&wbd111_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 1eebcec..99e5bbe 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -130,6 +130,7 @@
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
index 9392834..7670c39 100644
--- a/arch/arm/mach-gemini/common.h
+++ b/arch/arm/mach-gemini/common.h
@@ -18,6 +18,7 @@
extern void gemini_init_irq(void);
extern void gemini_timer_init(void);
extern void gemini_gpio_init(void);
+extern void platform_register_rtc(void);
/* Common platform devices registration functions */
extern int platform_register_uart(void);
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
index 6b52525..5cff298 100644
--- a/arch/arm/mach-gemini/devices.c
+++ b/arch/arm/mach-gemini/devices.c
@@ -90,3 +90,29 @@
return platform_device_register(&pflash_device);
}
+
+static struct resource gemini_rtc_resources[] = {
+ [0] = {
+ .start = GEMINI_RTC_BASE,
+ .end = GEMINI_RTC_BASE + 0x24,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gemini_rtc_device = {
+ .name = "rtc-gemini",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(gemini_rtc_resources),
+ .resource = gemini_rtc_resources,
+};
+
+int __init platform_register_rtc(void)
+{
+ return platform_device_register(&gemini_rtc_device);
+}
+
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
index cb0c0e8..61991e4 100644
--- a/arch/arm/mach-mxs/gpio.c
+++ b/arch/arm/mach-mxs/gpio.c
@@ -68,29 +68,29 @@
}
}
-static void mxs_gpio_ack_irq(u32 irq)
+static void mxs_gpio_ack_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
}
-static void mxs_gpio_mask_irq(u32 irq)
+static void mxs_gpio_mask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
}
-static void mxs_gpio_unmask_irq(u32 irq)
+static void mxs_gpio_unmask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-static int mxs_gpio_set_irq_type(u32 irq, u32 type)
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 pin_mask = 1 << (gpio & 31);
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
void __iomem *pin_addr;
@@ -160,9 +160,9 @@
* @param enable enable as wake-up if equal to non-zero
* @return This function returns 0 on success.
*/
-static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 gpio_idx = gpio & 0x1f;
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
@@ -182,11 +182,11 @@
}
static struct irq_chip gpio_irq_chip = {
- .ack = mxs_gpio_ack_irq,
- .mask = mxs_gpio_mask_irq,
- .unmask = mxs_gpio_unmask_irq,
- .set_type = mxs_gpio_set_irq_type,
- .set_wake = mxs_gpio_set_wake_irq,
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
};
static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 5dd43ba..0f4c120 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -34,7 +34,7 @@
static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
-static void icoll_ack_irq(unsigned int irq)
+static void icoll_ack_irq(struct irq_data *d)
{
/*
* The Interrupt Collector is able to prioritize irqs.
@@ -45,22 +45,22 @@
icoll_base + HW_ICOLL_LEVELACK);
}
-static void icoll_mask_irq(unsigned int irq)
+static void icoll_mask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
}
-static void icoll_unmask_irq(unsigned int irq)
+static void icoll_unmask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
}
static struct irq_chip mxs_icoll_chip = {
- .ack = icoll_ack_irq,
- .mask = icoll_mask_irq,
- .unmask = icoll_unmask_irq,
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = icoll_mask_irq,
+ .irq_unmask = icoll_unmask_irq,
};
void __init icoll_init_irq(void)
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 56a6479..cd926dc 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -123,9 +123,9 @@
extern void omap1_pm_idle(void);
extern void omap1_pm_suspend(void);
-extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
+extern void omap1510_cpu_suspend(unsigned long, unsigned long);
+extern void omap1610_cpu_suspend(unsigned long, unsigned long);
extern void omap7xx_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index ef771ce..c875bdc 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -58,6 +58,7 @@
*/
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ .align 3
ENTRY(omap7xx_cpu_suspend)
@ save registers on stack
@@ -137,6 +138,7 @@
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#ifdef CONFIG_ARCH_OMAP15XX
+ .align 3
ENTRY(omap1510_cpu_suspend)
@ save registers on stack
@@ -211,6 +213,7 @@
#endif /* CONFIG_ARCH_OMAP15XX */
#if defined(CONFIG_ARCH_OMAP16XX)
+ .align 3
ENTRY(omap1610_cpu_suspend)
@ save registers on stack
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 7724e52..692587d 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,6 +18,7 @@
/*
* Reprograms ULPD and CKCTL.
*/
+ .align 3
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 337392c..acb7ae5 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -77,7 +77,7 @@
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
- fint = clk->parent->rate / (n + 1);
+ fint = clk->parent->rate / n;
if (fint < DPLL_FINT_BAND1_MIN) {
pr_debug("rejecting n=%d due to Fint failure, "
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 394413d..24b8850 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -193,10 +193,12 @@
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
- u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- l = mbox_read_reg(p->irqdisable);
- l &= ~bit;
- mbox_write_reg(l, p->irqdisable);
+ u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
+
+ if (!cpu_is_omap44xx())
+ bit = mbox_read_reg(p->irqdisable) & ~bit;
+
+ mbox_write_reg(bit, p->irqdisable);
}
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -334,7 +336,7 @@
.priv = &omap2_mbox_iva_priv,
};
-struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#endif
#if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 98148b6..6c84659 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -605,7 +605,7 @@
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
}
}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 125f565..a5a83b3 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -637,14 +637,14 @@
}
- (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
&enable_off_mode, &pm_dbg_option_fops);
- (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+ (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+ S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
&pm_dbg_option_fops);
pm_dbg_init_done = 1;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 1c1b0ab..39580e6 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -92,7 +92,7 @@
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern void save_secure_ram_context(u32 *addr);
+extern int save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
index 729a644..3300ff6 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -38,8 +38,8 @@
#define OMAP4430_PRCM_MPU_CPU1_INST 0x0800
/* PRCM_MPU clockdomain register offsets (from instance start) */
-#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000
-#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000
+#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018
+#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018
/*
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index c7780cc..b5071a4 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -47,6 +47,7 @@
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
+ .align 3
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
mov r0, #0 @ clear for mcr setup
@@ -82,6 +83,7 @@
* The DLL load value is not kept in RETENTION or OFF. It needs to be restored
* at wake
*/
+ .align 3
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r3, #0x0 @ clear for mcr call
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 98d8232..951a0be6 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -118,6 +118,7 @@
.text
/* Function to call rom code to save secure ram context */
+ .align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
@@ -169,6 +170,7 @@
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
+ .align 3
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index c37e823..1a777e3 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -282,6 +282,7 @@
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
+ kfree(name);
kfree(sr_info);
return ret;
}
@@ -879,7 +880,7 @@
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_release_region;
}
}
@@ -890,17 +891,20 @@
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir)
- return -EINVAL;
+ if (!vdd_dbg_dir) {
+ ret = -EINVAL;
+ goto err_release_region;
+ }
dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
- return PTR_ERR(dbg_dir);
+ ret = PTR_ERR(dbg_dir);
+ goto err_release_region;
}
- (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
+ (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir,
(void *)sr_info, &pm_sr_fops);
(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
&sr_info->err_weight);
@@ -913,7 +917,8 @@
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
- return PTR_ERR(nvalue_dir);
+ ret = PTR_ERR(nvalue_dir);
+ goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
@@ -922,24 +927,16 @@
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
- return -ENODATA;
+ ret = -ENODATA;
+ goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
- char *name;
- char volt_name[32];
+ char name[NVALUE_NAME_LEN + 1];
- name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to allocate memory"
- " for n-value directory name\n", __func__);
- return -ENOMEM;
- }
-
- strcpy(name, "volt_");
- sprintf(volt_name, "%d", volt_data[i].volt_nominal);
- strcat(name, volt_name);
- (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
+ snprintf(name, sizeof(name), "volt_%d",
+ volt_data[i].volt_nominal);
+ (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 055310c..ff9b9db 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index f900758..7673020 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -39,6 +39,7 @@
.text
+ .align 3
ENTRY(omap243x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
@@ -143,6 +144,7 @@
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap243x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
@@ -238,6 +240,7 @@
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap243x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 7f893a2..25011ca 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -111,6 +111,7 @@
* since it will cause the ARM MMU to attempt to walk the page tables.
* These crashes may be intermittent.
*/
+ .align 3
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 7b7c268..0fc550e 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -39,6 +39,7 @@
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
+#include <asm/sched_clock.h>
#include "timer-gp.h"
@@ -190,6 +191,7 @@
/*
* clocksource
*/
+static DEFINE_CLOCK_DATA(cd);
static struct omap_dm_timer *gpt_clocksource;
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
@@ -204,6 +206,15 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static void notrace dmtimer_update_sched_clock(void)
+{
+ u32 cyc;
+
+ cyc = omap_dm_timer_read_counter(gpt_clocksource);
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
/* Setup free-running counter for clocksource */
static void __init omap2_gp_clocksource_init(void)
{
@@ -224,6 +235,8 @@
omap_dm_timer_set_load_start(gpt, 1, 0);
+ init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
+
if (clocksource_register_hz(&clocksource_gpt, tick_rate))
printk(err2, clocksource_gpt.name);
}
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index fd8360c..f15afe0 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -22,9 +22,8 @@
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int);
-extern void pxa27x_cpu_suspend(unsigned int);
-extern void pxa_cpu_resume(void);
+extern void pxa25x_cpu_suspend(unsigned int, long);
+extern void pxa27x_cpu_suspend(unsigned int, long);
extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 7bf4017..3010193 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -212,7 +212,7 @@
static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
{
/* setup the resume_info struct for the original bootloader */
- palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+ palmz72_resume_info.resume_addr = (u32) cpu_resume;
/* Storing memory touched by ROM */
store_ptr = *PALMZ72_SAVE_DWORD;
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 1807c9a..51e1583 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -67,11 +67,6 @@
EXPORT_SYMBOL_GPL(pxa_pm_enter);
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static int pxa_pm_valid(suspend_state_t state)
{
if (pxa_cpu_pm_fns)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fbc5b77..6bde595 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -244,7 +244,7 @@
switch (state) {
case PM_SUSPEND_MEM:
- pxa25x_cpu_suspend(PWRMODE_SLEEP);
+ pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
@@ -252,7 +252,7 @@
static int pxa25x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
@@ -347,6 +347,7 @@
&pxa25x_device_assp,
&pxa25x_device_pwm0,
&pxa25x_device_pwm1,
+ &pxa_device_asoc_platform,
};
static struct sys_device pxa25x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 987301f..28b11be 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -300,7 +300,7 @@
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(pwrmode);
+ pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
@@ -313,7 +313,7 @@
static int pxa27x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index a7a19e1..1230343 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -142,8 +142,7 @@
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
- extern void pxa3xx_cpu_suspend(void);
- extern void pxa3xx_cpu_resume(void);
+ extern void pxa3xx_cpu_suspend(long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -161,9 +160,9 @@
PSPR = 0x5c014000;
/* overwrite with the resume address */
- *p = virt_to_phys(pxa3xx_cpu_resume);
+ *p = virt_to_phys(cpu_resume);
- pxa3xx_cpu_suspend();
+ pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
*p = saved_data;
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index c551da8..6f53688 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -22,133 +22,26 @@
.text
-pxa_cpu_save_cp:
- @ get coprocessor registers
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- mov pc, lr
-
-pxa_cpu_save_sp:
- @ preserve phys address of stack
- mov r0, sp
- str lr, [sp, #-4]!
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
- ldr pc, [sp], #4
-
#ifdef CONFIG_PXA3xx
/*
* pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
*
- * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since
- * the auxiliary control register address is different between pxa3xx
- * and pxa{25x,27x}
+ * r0 = v:p offset
*/
-
ENTRY(pxa3xx_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- @ store physical address of stack pointer
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache
- bl xsc3_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
mov r0, #0x06 @ S2D3C4 mode
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
20: b 20b @ waiting for sleep
-
- .data
- .align 5
-/*
- * pxa3xx_cpu_resume
- */
-
-ENTRY(pxa3xx_cpu_resume)
-
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
- mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer
- mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r1, r7
- bic r1, r1, #0x00ff
- bic r1, r1, #0x3f00
- ldr r2, =0x542e
-
- adr r3, resume_turn_on_mmu
- mov r3, r3, lsr #20
- orr r4, r2, r3, lsl #20
- ldr r5, [r1, r3, lsl #2]
- str r4, [r1, r3, lsl #2]
-
- @ Mapping page table address in the page table
- mov r6, r1, lsr #20
- orr r7, r2, r6, lsl #20
- ldr r8, [r1, r6, lsl #2]
- str r7, [r1, r6, lsl #2]
-
- ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address
- b resume_turn_on_mmu @ cache align execution
-
- .text
-pxa3xx_resume_after_mmu:
- /* restore the temporary mapping */
- str r5, [r1, r3, lsl #2]
- str r8, [r1, r6, lsl #2]
- b resume_after_mmu
-
#endif /* CONFIG_PXA3xx */
#ifdef CONFIG_PXA27x
@@ -158,28 +51,23 @@
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
-
ENTRY(pxa27x_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ Put the processor to sleep
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
@@ -216,21 +104,16 @@
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
ENTRY(pxa25x_cpu_suspend)
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
-
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
@@ -317,53 +200,9 @@
* pxa_cpu_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
.align 5
-ENTRY(pxa_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- b resume_turn_on_mmu @ cache align execution
-
- .align 5
-resume_turn_on_mmu:
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc.
-
- @ Let us ensure we jump to resume_after_mmu only when the mcr above
- @ actually took effect. They call it the "cpwait" operation.
- mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
- sub pc, r2, r0, lsr #32 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+pxa_cpu_resume:
ldmfd sp!, {r2, r3}
#ifndef CONFIG_IWMMXT
mar acc0, r2, r3
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index c31e601..b9b1e5c 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -81,8 +81,6 @@
goto err_rfk_alloc;
}
- rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
rc = rfkill_register(rfk);
if (rc)
goto err_rfkill;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index af152e7..f2582ec 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -875,6 +875,11 @@
.dev.platform_data = &sharpsl_rom_data,
};
+static struct platform_device wm9712_device = {
+ .name = "wm9712-codec",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
@@ -885,6 +890,7 @@
&tosaled_device,
&tosa_bt_device,
&sharpsl_rom_device,
+ &wm9712_device,
};
static void tosa_poweroff(void)
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f4b053b..b92aa3b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -676,7 +676,7 @@
static void zeus_power_off(void)
{
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
}
#else
#define zeus_power_off NULL
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a0cb258..50825a3 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -99,6 +99,7 @@
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
index 953331d..3a56a22 100644
--- a/arch/arm/mach-s3c2440/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
@@ -44,19 +44,19 @@
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
-#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
+#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
+#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
+#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
+#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
+#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
+#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index dd37820..fdfc4d5 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -151,6 +151,12 @@
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
}, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
+ }, {
.name = "iis",
.id = 0,
.parent = &clk_p,
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 135db1b..c35585c 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -690,12 +690,12 @@
regptr = regs + PL080_Cx_BASE(0);
- for (ch = 0; ch < 8; ch++, chno++, chptr++) {
- printk(KERN_INFO "%s: registering DMA %d (%p)\n",
- __func__, chno, regptr);
+ for (ch = 0; ch < 8; ch++, chptr++) {
+ pr_debug("%s: registering DMA %d (%p)\n",
+ __func__, chno + ch, regptr);
chptr->bit = 1 << ch;
- chptr->number = chno;
+ chptr->number = chno + ch;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL080_Cx_STRIDE;
@@ -704,7 +704,8 @@
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
- printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+ printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
+ irq, regs, chno, chno+8);
return 0;
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index fd99a82..92b0908 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -72,7 +72,7 @@
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
@@ -138,7 +138,7 @@
},
};
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index e85192a..a80a316 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
@@ -351,7 +352,7 @@
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
- .name = "PVDD_UH/PVDD_MMC",
+ .name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
@@ -417,7 +418,7 @@
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
- .name = "PVDD_INT/PVDD_PLL",
+ .name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
@@ -452,7 +453,7 @@
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
- .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
@@ -464,7 +465,7 @@
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
- .name = "PVDD_OTGI/HPVDD/AVDD",
+ .name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
@@ -552,7 +553,7 @@
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
- .name = "PVDD_MEM/PVDD_GPS",
+ .name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
@@ -563,7 +564,7 @@
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
- .name = "PVDD_LCD/PVDD_EXT",
+ .name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
index f8ed0d2..1d4d0ee 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -17,7 +17,7 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index 1a94203..f344a22 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -56,7 +56,7 @@
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index b2ef443..afe5a76 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -32,25 +32,13 @@
* code after resume.
*
* entry:
- * r0 = pointer to the save block
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
-
- stmia r0, { r4 - r13 } @ Save CP registers and SP
-
- @@ save our state to ram
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ call final suspend code
ldr r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
- .data
-
- /* the next bit is code, but it requires easy access to the
- * s3c_sleep_save_phys data before the MMU is switched on, so
- * we store the code that needs this variable in the .data where
- * the value can be written to (the .text segment is RO).
- */
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
@@ -110,35 +86,4 @@
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
-
- /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
- * are thoroughly cleaned just in case the bootloader didn't do it
- * for us. */
- mov r0, #0
- mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
- @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
- @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
-
- ldr r0, s3c_sleep_save_phys
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0 @ restore copro access controls
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mcr p15, 0, r0, c7, c5, 4
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
- nop
- mov pc, r2 /* jump back */
-
- .end
+ b cpu_resume
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a..058dab4 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p6442/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P6442_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM 0x20000000
-#define S5P6442_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0 0xC0B00000
+#define S5P6442_PA_I2S1 0xF2200000
-#define S5P6442_PA_GPIO (0xE0200000)
+#define S5P6442_PA_CHIPID 0xE0000000
-#define S5P6442_PA_VIC0 (0xE4000000)
-#define S5P6442_PA_VIC1 (0xE4100000)
-#define S5P6442_PA_VIC2 (0xE4200000)
+#define S5P6442_PA_SYSCON 0xE0100000
-#define S5P6442_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO 0xE0200000
+
+#define S5P6442_PA_VIC0 0xE4000000
+#define S5P6442_PA_VIC1 0xE4100000
+#define S5P6442_PA_VIC2 0xE4200000
+
+#define S5P6442_PA_SROMC 0xE7000000
#define S5P6442_PA_MDMA 0xE8000000
#define S5P6442_PA_PDMA 0xE9000000
-#define S5P6442_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5P6442_PA_TIMER
+#define S5P6442_PA_TIMER 0xEA000000
-#define S5P6442_PA_SYSTIMER (0xEA100000)
+#define S5P6442_PA_SYSTIMER 0xEA100000
-#define S5P6442_PA_WATCHDOG (0xEA200000)
+#define S5P6442_PA_WATCHDOG 0xEA200000
-#define S5P6442_PA_UART (0xEC000000)
+#define S5P6442_PA_UART 0xEC000000
-#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART SZ_256
-
-#define S5P6442_PA_IIC0 (0xEC100000)
-
-#define S5P6442_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0 0xEC100000
#define S5P6442_PA_SPI 0xEC300000
-/* I2S */
-#define S5P6442_PA_I2S0 0xC0B00000
-#define S5P6442_PA_I2S1 0xF2200000
-
-/* PCM */
#define S5P6442_PA_PCM0 0xF2400000
#define S5P6442_PA_PCM1 0xF2500000
-/* compatibiltiy defines. */
-#define S3C_PA_WDT S5P6442_PA_WATCHDOG
-#define S3C_PA_UART S5P6442_PA_UART
+/* Compatibiltiy Defines */
+
#define S3C_PA_IIC S5P6442_PA_IIC0
+#define S3C_PA_WDT S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P_PA_TIMER S5P6442_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART S5P6442_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index 5486c8f..adb5f29 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -23,7 +23,7 @@
#define S5P6440_GPIO_A_NR (6)
#define S5P6440_GPIO_B_NR (7)
#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (2)
+#define S5P6440_GPIO_F_NR (16)
#define S5P6440_GPIO_G_NR (7)
#define S5P6440_GPIO_H_NR (10)
#define S5P6440_GPIO_I_NR (16)
@@ -36,7 +36,7 @@
#define S5P6450_GPIO_B_NR (7)
#define S5P6450_GPIO_C_NR (8)
#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (2)
+#define S5P6450_GPIO_F_NR (16)
#define S5P6450_GPIO_G_NR (14)
#define S5P6450_GPIO_H_NR (10)
#define S5P6450_GPIO_I_NR (16)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5..95c9125 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
*
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - Memory map definitions
@@ -16,30 +16,63 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P64X0_PA_SDRAM (0x20000000)
+#define S5P64X0_PA_SDRAM 0x20000000
-#define S5P64X0_PA_CHIPID (0xE0000000)
+#define S5P64X0_PA_CHIPID 0xE0000000
+
+#define S5P64X0_PA_SYSCON 0xE0100000
+
+#define S5P64X0_PA_GPIO 0xE0308000
+
+#define S5P64X0_PA_VIC0 0xE4000000
+#define S5P64X0_PA_VIC1 0xE4100000
+
+#define S5P64X0_PA_SROMC 0xE7000000
+
+#define S5P64X0_PA_PDMA 0xE9000000
+
+#define S5P64X0_PA_TIMER 0xEA000000
+#define S5P64X0_PA_RTC 0xEA100000
+#define S5P64X0_PA_WDT 0xEA200000
+
+#define S5P6440_PA_IIC0 0xEC104000
+#define S5P6440_PA_IIC1 0xEC20F000
+#define S5P6450_PA_IIC0 0xEC100000
+#define S5P6450_PA_IIC1 0xEC200000
+
+#define S5P64X0_PA_SPI0 0xEC400000
+#define S5P64X0_PA_SPI1 0xEC500000
+
+#define S5P64X0_PA_HSOTG 0xED100000
+
+#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S 0xF2000000
+#define S5P6450_PA_I2S1 0xF2800000
+#define S5P6450_PA_I2S2 0xF2900000
+
+#define S5P64X0_PA_PCM 0xF2100000
+
+#define S5P64X0_PA_ADC 0xF3000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC S5P6440_PA_IIC0
+#define S3C_PA_IIC1 S5P6440_PA_IIC1
+#define S3C_PA_RTC S5P64X0_PA_RTC
+#define S3C_PA_WDT S5P64X0_PA_WDT
+
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO (0xE0308000)
-
-#define S5P64X0_PA_VIC0 (0xE4000000)
-#define S5P64X0_PA_VIC1 (0xE4100000)
-
-#define S5P64X0_PA_SROMC (0xE7000000)
#define S5P_PA_SROMC S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA (0xE9000000)
-
-#define S5P64X0_PA_TIMER (0xEA000000)
+#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
#define S5P_PA_TIMER S5P64X0_PA_TIMER
-#define S5P64X0_PA_RTC (0xEA100000)
+#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-#define S5P64X0_PA_WDT (0xEA200000)
+/* UART */
#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
@@ -53,36 +86,4 @@
#define S5P_SZ_UART SZ_256
-#define S5P6440_PA_IIC0 (0xEC104000)
-#define S5P6440_PA_IIC1 (0xEC20F000)
-#define S5P6450_PA_IIC0 (0xEC100000)
-#define S5P6450_PA_IIC1 (0xEC200000)
-
-#define S5P64X0_PA_SPI0 (0xEC400000)
-#define S5P64X0_PA_SPI1 (0xEC500000)
-
-#define S5P64X0_PA_HSOTG (0xED100000)
-
-#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_I2S (0xF2000000)
-#define S5P6450_PA_I2S1 0xF2800000
-#define S5P6450_PA_I2S2 0xF2900000
-
-#define S5P64X0_PA_PCM (0xF2100000)
-
-#define S5P64X0_PA_ADC (0xF3000000)
-
-/* compatibiltiy defines. */
-
-#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC S5P6440_PA_IIC0
-#define S3C_PA_IIC1 S5P6440_PA_IIC1
-#define S3C_PA_RTC S5P64X0_PA_RTC
-#define S3C_PA_WDT S5P64X0_PA_WDT
-
-#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b..ccbe6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,5 +1,8 @@
/* linux/arch/arm/mach-s5pc100/include/mach/map.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
@@ -16,145 +19,115 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
- * S3C_VA_SYS S3C_ADDR(0x00100000) system control
- * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
- * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
- * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
- * S3C_VA_UART S3C_ADDR(0x01000000) UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
- *
- */
+#define S5PC100_PA_SDRAM 0x20000000
-#define S5PC100_PA_ONENAND_BUF (0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
+#define S5PC100_PA_ONENAND 0xE7100000
+#define S5PC100_PA_ONENAND_BUF 0xB0000000
-/* Chip ID */
+#define S5PC100_PA_CHIPID 0xE0000000
-#define S5PC100_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC100_PA_SYSCON 0xE0100000
-#define S5PC100_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5PC100_PA_OTHERS 0xE0200000
-#define S5PC100_PA_OTHERS (0xE0200000)
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_GPIO 0xE0300000
-#define S5PC100_PA_GPIO (0xE0300000)
-#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S5PC100_PA_VIC0 0xE4000000
+#define S5PC100_PA_VIC1 0xE4100000
+#define S5PC100_PA_VIC2 0xE4200000
-/* Interrupt */
-#define S5PC100_PA_VIC0 (0xE4000000)
-#define S5PC100_PA_VIC1 (0xE4100000)
-#define S5PC100_PA_VIC2 (0xE4200000)
-#define S5PC100_VA_VIC S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET 0x10000
-#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_SROMC 0xE7000000
-#define S5PC100_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5PC100_PA_CFCON 0xE7800000
-#define S5PC100_PA_ONENAND (0xE7100000)
+#define S5PC100_PA_MDMA 0xE8100000
+#define S5PC100_PA_PDMA0 0xE9000000
+#define S5PC100_PA_PDMA1 0xE9200000
-#define S5PC100_PA_CFCON (0xE7800000)
+#define S5PC100_PA_TIMER 0xEA000000
+#define S5PC100_PA_SYSTIMER 0xEA100000
+#define S5PC100_PA_WATCHDOG 0xEA200000
+#define S5PC100_PA_RTC 0xEA300000
-/* DMA */
-#define S5PC100_PA_MDMA (0xE8100000)
-#define S5PC100_PA_PDMA0 (0xE9000000)
-#define S5PC100_PA_PDMA1 (0xE9200000)
+#define S5PC100_PA_UART 0xEC000000
-/* Timer */
-#define S5PC100_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5PC100_PA_TIMER
+#define S5PC100_PA_IIC0 0xEC100000
+#define S5PC100_PA_IIC1 0xEC200000
-#define S5PC100_PA_SYSTIMER (0xEA100000)
+#define S5PC100_PA_SPI0 0xEC300000
+#define S5PC100_PA_SPI1 0xEC400000
+#define S5PC100_PA_SPI2 0xEC500000
-#define S5PC100_PA_WATCHDOG (0xEA200000)
-#define S5PC100_PA_RTC (0xEA300000)
+#define S5PC100_PA_USB_HSOTG 0xED200000
+#define S5PC100_PA_USB_HSPHY 0xED300000
-#define S5PC100_PA_UART (0xEC000000)
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
-#define S5P_SZ_UART SZ_256
+#define S5PC100_PA_FB 0xEE000000
-#define S5PC100_PA_IIC0 (0xEC100000)
-#define S5PC100_PA_IIC1 (0xEC200000)
+#define S5PC100_PA_FIMC0 0xEE200000
+#define S5PC100_PA_FIMC1 0xEE300000
+#define S5PC100_PA_FIMC2 0xEE400000
-/* SPI */
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
+#define S5PC100_PA_I2S0 0xF2000000
+#define S5PC100_PA_I2S1 0xF2100000
+#define S5PC100_PA_I2S2 0xF2200000
-/* USB HS OTG */
-#define S5PC100_PA_USB_HSOTG (0xED200000)
-#define S5PC100_PA_USB_HSPHY (0xED300000)
+#define S5PC100_PA_AC97 0xF2300000
-#define S5PC100_PA_FB (0xEE000000)
+#define S5PC100_PA_PCM0 0xF2400000
+#define S5PC100_PA_PCM1 0xF2500000
-#define S5PC100_PA_FIMC0 (0xEE200000)
-#define S5PC100_PA_FIMC1 (0xEE300000)
-#define S5PC100_PA_FIMC2 (0xEE400000)
+#define S5PC100_PA_SPDIF 0xF2600000
-#define S5PC100_PA_I2S0 (0xF2000000)
-#define S5PC100_PA_I2S1 (0xF2100000)
-#define S5PC100_PA_I2S2 (0xF2200000)
+#define S5PC100_PA_TSADC 0xF3000000
-#define S5PC100_PA_AC97 0xF2300000
+#define S5PC100_PA_KEYPAD 0xF3100000
-/* PCM */
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
+/* Compatibiltiy Defines */
-#define S5PC100_PA_SPDIF 0xF2600000
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC S5PC100_PA_IIC0
+#define S3C_PA_IIC1 S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC S5PC100_PA_RTC
+#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S5PC100_PA_TSADC (0xF3000000)
+#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5P_PA_TIMER S5PC100_PA_TIMER
-/* KEYPAD */
-#define S5PC100_PA_KEYPAD (0xF3100000)
+#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-#define S5PC100_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PC100_PA_UART
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_G2D S5PC100_PA_G2D
-#define S3C_PA_G3D S5PC100_PA_G3D
-#define S3C_PA_JPEG S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
-#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0)
-#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1)
-#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2)
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
+/* UART */
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_UART S5PC100_PA_UART
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
-#endif /* __ASM_ARCH_C100_MAP_H */
+#define S5P_SZ_UART SZ_256
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 3611492..1dd5883 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv210/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - Memory map definitions
@@ -16,122 +16,120 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5PV210_PA_SROM_BANK5 (0xA8000000)
+#define S5PV210_PA_SDRAM 0x20000000
-#define S5PC110_PA_ONENAND (0xB0000000)
-#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5PV210_PA_SROM_BANK5 0xA8000000
-#define S5PC110_PA_ONENAND_DMA (0xB0600000)
-#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5PC110_PA_ONENAND 0xB0000000
+#define S5PC110_PA_ONENAND_DMA 0xB0600000
-#define S5PV210_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5PV210_PA_CHIPID 0xE0000000
-#define S5PV210_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5PV210_PA_SYSCON 0xE0100000
-#define S5PV210_PA_GPIO (0xE0200000)
+#define S5PV210_PA_GPIO 0xE0200000
-/* SPI */
-#define S5PV210_PA_SPI0 0xE1300000
-#define S5PV210_PA_SPI1 0xE1400000
+#define S5PV210_PA_SPDIF 0xE1100000
-#define S5PV210_PA_KEYPAD (0xE1600000)
+#define S5PV210_PA_SPI0 0xE1300000
+#define S5PV210_PA_SPI1 0xE1400000
-#define S5PV210_PA_IIC0 (0xE1800000)
-#define S5PV210_PA_IIC1 (0xFAB00000)
-#define S5PV210_PA_IIC2 (0xE1A00000)
+#define S5PV210_PA_KEYPAD 0xE1600000
-#define S5PV210_PA_TIMER (0xE2500000)
-#define S5P_PA_TIMER S5PV210_PA_TIMER
+#define S5PV210_PA_ADC 0xE1700000
-#define S5PV210_PA_SYSTIMER (0xE2600000)
+#define S5PV210_PA_IIC0 0xE1800000
+#define S5PV210_PA_IIC1 0xFAB00000
+#define S5PV210_PA_IIC2 0xE1A00000
-#define S5PV210_PA_WATCHDOG (0xE2700000)
+#define S5PV210_PA_AC97 0xE2200000
-#define S5PV210_PA_RTC (0xE2800000)
-#define S5PV210_PA_UART (0xE2900000)
+#define S5PV210_PA_PCM0 0xE2300000
+#define S5PV210_PA_PCM1 0xE1200000
+#define S5PV210_PA_PCM2 0xE2B00000
-#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00)
+#define S5PV210_PA_TIMER 0xE2500000
+#define S5PV210_PA_SYSTIMER 0xE2600000
+#define S5PV210_PA_WATCHDOG 0xE2700000
+#define S5PV210_PA_RTC 0xE2800000
-#define S5P_SZ_UART SZ_256
+#define S5PV210_PA_UART 0xE2900000
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5PV210_PA_SROMC 0xE8000000
-#define S5PV210_PA_SROMC (0xE8000000)
-#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5PV210_PA_CFCON 0xE8200000
-#define S5PV210_PA_CFCON (0xE8200000)
+#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
-#define S5PV210_PA_MDMA 0xFA200000
-#define S5PV210_PA_PDMA0 0xE0900000
-#define S5PV210_PA_PDMA1 0xE0A00000
+#define S5PV210_PA_HSOTG 0xEC000000
+#define S5PV210_PA_HSPHY 0xEC100000
-#define S5PV210_PA_FB (0xF8000000)
+#define S5PV210_PA_IIS0 0xEEE30000
+#define S5PV210_PA_IIS1 0xE2100000
+#define S5PV210_PA_IIS2 0xE2A00000
-#define S5PV210_PA_FIMC0 (0xFB200000)
-#define S5PV210_PA_FIMC1 (0xFB300000)
-#define S5PV210_PA_FIMC2 (0xFB400000)
+#define S5PV210_PA_DMC0 0xF0000000
+#define S5PV210_PA_DMC1 0xF1400000
-#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_VIC0 0xF2000000
+#define S5PV210_PA_VIC1 0xF2100000
+#define S5PV210_PA_VIC2 0xF2200000
+#define S5PV210_PA_VIC3 0xF2300000
-#define S5PV210_PA_HSOTG (0xEC000000)
-#define S5PV210_PA_HSPHY (0xEC100000)
+#define S5PV210_PA_FB 0xF8000000
-#define S5PV210_PA_VIC0 (0xF2000000)
-#define S5PV210_PA_VIC1 (0xF2100000)
-#define S5PV210_PA_VIC2 (0xF2200000)
-#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5PV210_PA_MDMA 0xFA200000
+#define S5PV210_PA_PDMA0 0xE0900000
+#define S5PV210_PA_PDMA1 0xE0A00000
-#define S5PV210_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5PV210_PA_MIPI_CSIS 0xFA600000
-/* S/PDIF */
-#define S5PV210_PA_SPDIF 0xE1100000
+#define S5PV210_PA_FIMC0 0xFB200000
+#define S5PV210_PA_FIMC1 0xFB300000
+#define S5PV210_PA_FIMC2 0xFB400000
-/* I2S */
-#define S5PV210_PA_IIS0 0xEEE30000
-#define S5PV210_PA_IIS1 0xE2100000
-#define S5PV210_PA_IIS2 0xE2A00000
+/* Compatibiltiy Defines */
-/* PCM */
-#define S5PV210_PA_PCM0 0xE2300000
-#define S5PV210_PA_PCM1 0xE1200000
-#define S5PV210_PA_PCM2 0xE2B00000
+#define S3C_PA_FB S5PV210_PA_FB
+#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
+#define S3C_PA_IIC S5PV210_PA_IIC0
+#define S3C_PA_IIC1 S5PV210_PA_IIC1
+#define S3C_PA_IIC2 S5PV210_PA_IIC2
+#define S3C_PA_RTC S5PV210_PA_RTC
+#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
+#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-/* AC97 */
-#define S5PV210_PA_AC97 0xE2200000
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5P_PA_TIMER S5PV210_PA_TIMER
-#define S5PV210_PA_ADC (0xE1700000)
+#define SAMSUNG_PA_ADC S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
-#define S5PV210_PA_DMC0 (0xF0000000)
-#define S5PV210_PA_DMC1 (0xF1400000)
+/* UART */
-#define S5PV210_PA_MIPI_CSIS 0xFA600000
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV210_PA_UART
-#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV210_PA_IIC0
-#define S3C_PA_IIC1 S5PV210_PA_IIC1
-#define S3C_PA_IIC2 S5PV210_PA_IIC2
-#define S3C_PA_FB S5PV210_PA_FB
-#define S3C_PA_RTC S5PV210_PA_RTC
-#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
-#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S3C_PA_UART S5PV210_PA_UART
-#define SAMSUNG_PA_ADC S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 461aa035..557add4 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -149,7 +149,7 @@
static struct regulator_init_data aquila_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -197,7 +197,7 @@
static struct regulator_init_data aquila_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -207,7 +207,7 @@
static struct regulator_init_data aquila_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -381,9 +381,12 @@
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e22d511..056f5c7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -288,7 +288,7 @@
static struct regulator_init_data goni_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -337,7 +337,7 @@
static struct regulator_init_data goni_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -347,7 +347,7 @@
static struct regulator_init_data goni_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -521,9 +521,12 @@
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index d4d222b..a3d6494 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r3 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
- mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
-
- stmia r0, { r3 - r13 }
-
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
ldr r0, =pm_cpu_sleep
ldr r0, [ r0 ]
mov pc, r0
resume_with_mmu:
- /*
- * After MMU is turned on, restore the previous MMU table.
- */
- ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
- add r4, r4, r9
- str r12, [r4]
-
ldmfd sp!, { r3 - r12, pc }
.ltorg
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -96,75 +70,4 @@
*/
ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r3 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
-
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
-
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0
- mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
-
- mov r0, #0 @ restore copro access
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
- mcr p15, 0, r0, c7, c5, 4
-
- mcr p15, 0, r12, c10, c2, 0 @ write PRRR
- mcr p15, 0, r3, c10, c2, 1 @ write NMRR
-
- /*
- * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
- * And there are no valid entries in the MMU table at this point.
- * So before turning on the MMU, the MMU entry for the DRAM address
- * range is added. After the MMU is turned on, the other entries
- * in the MMU table will be restored.
- */
-
- /* r6 = Translation Table BASE0 */
- mov r4, r6
- mov r4, r4, LSR #14
- mov r4, r4, LSL #14
-
- /* Load address for adding to MMU table list */
- ldr r11, =0xE010F000 @ INFORM0 reg.
- ldr r10, [r11, #0]
- mov r10, r10, LSR #18
- bic r10, r10, #0x3
- orr r4, r4, r10
-
- /* Calculate MMU table entry */
- mov r10, r10, LSL #18
- ldr r5, =0x40E
- orr r10, r10, r5
-
- /* Back up originally data */
- ldr r12, [r4]
-
- /* Add calculated MMU table entry into MMU table list */
- str r10, [r4]
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
-
- nop
- nop
- nop
- nop
- nop @ second-to-last before mmu
-
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 3060f78..901657f 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv310/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Memory map definitions
@@ -23,90 +23,43 @@
#include <plat/map-s5p.h>
-#define S5PV310_PA_SYSRAM (0x02025000)
+#define S5PV310_PA_SYSRAM 0x02025000
+
+#define S5PV310_PA_I2S0 0x03830000
+#define S5PV310_PA_I2S1 0xE3100000
+#define S5PV310_PA_I2S2 0xE2A00000
+
+#define S5PV310_PA_PCM0 0x03840000
+#define S5PV310_PA_PCM1 0x13980000
+#define S5PV310_PA_PCM2 0x13990000
#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-#define S5PC210_PA_ONENAND (0x0C000000)
-#define S5P_PA_ONENAND S5PC210_PA_ONENAND
+#define S5PC210_PA_ONENAND 0x0C000000
+#define S5PC210_PA_ONENAND_DMA 0x0C600000
-#define S5PC210_PA_ONENAND_DMA (0x0C600000)
-#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
+#define S5PV310_PA_CHIPID 0x10000000
-#define S5PV310_PA_CHIPID (0x10000000)
-#define S5P_PA_CHIPID S5PV310_PA_CHIPID
+#define S5PV310_PA_SYSCON 0x10010000
+#define S5PV310_PA_PMU 0x10020000
+#define S5PV310_PA_CMU 0x10030000
-#define S5PV310_PA_SYSCON (0x10010000)
-#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5PV310_PA_WATCHDOG 0x10060000
+#define S5PV310_PA_RTC 0x10070000
-#define S5PV310_PA_PMU (0x10020000)
+#define S5PV310_PA_DMC0 0x10400000
-#define S5PV310_PA_CMU (0x10030000)
+#define S5PV310_PA_COMBINER 0x10448000
-#define S5PV310_PA_WATCHDOG (0x10060000)
-#define S5PV310_PA_RTC (0x10070000)
+#define S5PV310_PA_COREPERI 0x10500000
+#define S5PV310_PA_GIC_CPU 0x10500100
+#define S5PV310_PA_TWD 0x10500600
+#define S5PV310_PA_GIC_DIST 0x10501000
+#define S5PV310_PA_L2CC 0x10502000
-#define S5PV310_PA_DMC0 (0x10400000)
-
-#define S5PV310_PA_COMBINER (0x10448000)
-
-#define S5PV310_PA_COREPERI (0x10500000)
-#define S5PV310_PA_GIC_CPU (0x10500100)
-#define S5PV310_PA_TWD (0x10500600)
-#define S5PV310_PA_GIC_DIST (0x10501000)
-#define S5PV310_PA_L2CC (0x10502000)
-
-/* DMA */
-#define S5PV310_PA_MDMA 0x10810000
-#define S5PV310_PA_PDMA0 0x12680000
-#define S5PV310_PA_PDMA1 0x12690000
-
-#define S5PV310_PA_GPIO1 (0x11400000)
-#define S5PV310_PA_GPIO2 (0x11000000)
-#define S5PV310_PA_GPIO3 (0x03860000)
-
-#define S5PV310_PA_MIPI_CSIS0 0x11880000
-#define S5PV310_PA_MIPI_CSIS1 0x11890000
-
-#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
-
-#define S5PV310_PA_SROMC (0x12570000)
-#define S5P_PA_SROMC S5PV310_PA_SROMC
-
-/* S/PDIF */
-#define S5PV310_PA_SPDIF 0xE1100000
-
-/* I2S */
-#define S5PV310_PA_I2S0 0x03830000
-#define S5PV310_PA_I2S1 0xE3100000
-#define S5PV310_PA_I2S2 0xE2A00000
-
-/* PCM */
-#define S5PV310_PA_PCM0 0x03840000
-#define S5PV310_PA_PCM1 0x13980000
-#define S5PV310_PA_PCM2 0x13990000
-
-/* AC97 */
-#define S5PV310_PA_AC97 0x139A0000
-
-#define S5PV310_PA_UART (0x13800000)
-
-#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
-#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
-
-#define S5PV310_PA_TIMER (0x139D0000)
-#define S5P_PA_TIMER S5PV310_PA_TIMER
-
-#define S5PV310_PA_SDRAM (0x40000000)
-#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5PV310_PA_MDMA 0x10810000
+#define S5PV310_PA_PDMA0 0x12680000
+#define S5PV310_PA_PDMA1 0x12690000
#define S5PV310_PA_SYSMMU_MDMA 0x10A40000
#define S5PV310_PA_SYSMMU_SSS 0x10A50000
@@ -125,8 +78,31 @@
#define S5PV310_PA_SYSMMU_MFC_L 0x13620000
#define S5PV310_PA_SYSMMU_MFC_R 0x13630000
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV310_PA_UART
+#define S5PV310_PA_GPIO1 0x11400000
+#define S5PV310_PA_GPIO2 0x11000000
+#define S5PV310_PA_GPIO3 0x03860000
+
+#define S5PV310_PA_MIPI_CSIS0 0x11880000
+#define S5PV310_PA_MIPI_CSIS1 0x11890000
+
+#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC 0x12570000
+
+#define S5PV310_PA_UART 0x13800000
+
+#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_AC97 0x139A0000
+
+#define S5PV310_PA_TIMER 0x139D0000
+
+#define S5PV310_PA_SDRAM 0x40000000
+
+#define S5PV310_PA_SPDIF 0xE1100000
+
+/* Compatibiltiy Defines */
+
#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2)
@@ -141,7 +117,28 @@
#define S3C_PA_IIC7 S5PV310_PA_IIC(7)
#define S3C_PA_RTC S5PV310_PA_RTC
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5PV310_PA_CHIPID
#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1
+#define S5P_PA_ONENAND S5PC210_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5P_PA_SROMC S5PV310_PA_SROMC
+#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5P_PA_TIMER S5PV310_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART S5PV310_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+#define S5P_PA_UART4 S5P_PA_UART(4)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index ab9fc44..c4661aa 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -32,8 +32,7 @@
#include <asm/system.h>
#include <asm/mach/time.h>
-extern void sa1100_cpu_suspend(void);
-extern void sa1100_cpu_resume(void);
+extern void sa1100_cpu_suspend(long);
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
@@ -73,10 +72,10 @@
RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
/* set resume return address */
- PSPR = virt_to_phys(sa1100_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
/* go zzz */
- sa1100_cpu_suspend();
+ sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
cpu_init();
@@ -115,11 +114,6 @@
return 0;
}
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static const struct platform_suspend_ops sa11x0_pm_ops = {
.enter = sa11x0_pm_enter,
.valid = suspend_valid_only_mem,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 80f31ba..04f2a61 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -20,12 +20,7 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-
-
.text
-
-
-
/*
* sa1100_cpu_suspend()
*
@@ -34,27 +29,10 @@
*/
ENTRY(sa1100_cpu_suspend)
-
stmfd sp!, {r4 - r12, lr} @ save registers on stack
-
- @ get coprocessor registers
- mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
-
- @ store them plus current virtual stack ptr on stack
- mov r8, sp
- stmfd sp!, {r4 - r8}
-
- @ preserve phys address of stack
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache and invalidate WB
- bl v4wb_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =sa1100_cpu_resume @ return function
+ bl cpu_suspend
@ disable clock switching
mcr p15, 0, r1, c15, c2, 2
@@ -166,50 +144,8 @@
* cpu_sa1100_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
.align 5
-ENTRY(sa1100_cpu_resume)
- mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
- msr cpsr_c, r0 @ set SVC, irqs off
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r4 - r7, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
-
- mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- b resume_turn_on_mmu @ cache align execution
-
- .align 5
-resume_turn_on_mmu:
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, caches, etc.
- nop
- mov pc, r2 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+sa1100_cpu_resume:
mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
ldmfd sp!, {r4 - r12, pc} @ return to caller
-
-
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 2123b96..4303a86 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -454,6 +454,7 @@
gpio_direction_output(GPIO_PORT217, 0);
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
+ mdelay(100);
/* LCD backlight controller */
gpio_request(GPIO_PORT235, NULL); /* RESET */
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 3cf0951..81d6536 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1303,7 +1303,7 @@
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].clock_divider = 3;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index fb4213a..1657eac 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -303,7 +303,7 @@
.lcd_cfg = mackerel_lcdc_modes,
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
.interface_type = RGB24,
- .clock_divider = 2,
+ .clock_divider = 3,
.flags = 0,
.lcd_size_cfg.width = 152,
.lcd_size_cfg.height = 91,
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index ddd4a1b..7e58904 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -263,7 +263,7 @@
};
enum { MSTP001,
- MSTP125, MSTP118, MSTP116, MSTP100,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
@@ -275,6 +275,10 @@
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
+ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
+ [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
+ [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
@@ -306,6 +310,9 @@
CLKDEV_CON_ID("r_clk", &r_clk),
/* DIV6 clocks */
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
@@ -313,11 +320,15 @@
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
index efd3687..3029aba 100644
--- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
+++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
@@ -6,13 +6,10 @@
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
@@ -37,6 +34,9 @@
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
@@ -53,7 +53,7 @@
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
@@ -84,7 +84,7 @@
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
index efd3687..3029aba 100644
--- a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
+++ b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
@@ -6,13 +6,10 @@
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
@@ -37,6 +34,9 @@
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
@@ -53,7 +53,7 @@
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
@@ -84,7 +84,7 @@
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h
new file mode 100644
index 0000000..a8d02be
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h
@@ -0,0 +1,29 @@
+#ifndef MMCIF_AP4EB_H
+#define MMCIF_AP4EB_H
+
+#define PORT185CR (void __iomem *)0xe60520b9
+#define PORT186CR (void __iomem *)0xe60520ba
+#define PORT187CR (void __iomem *)0xe60520bb
+#define PORT188CR (void __iomem *)0xe60520bc
+
+#define PORTR191_160DR (void __iomem *)0xe6056014
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS1-4
+ * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT185CR);
+ __raw_writeb(0x10, PORT186CR);
+ __raw_writeb(0x10, PORT187CR);
+ __raw_writeb(0x10, PORT188CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
+ (1 << (25 + n)), PORTR191_160DR);
+}
+
+#endif /* MMCIF_AP4EB_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h
new file mode 100644
index 0000000..4b4f694
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h
@@ -0,0 +1,39 @@
+#ifndef MMCIF_MACKEREL_H
+#define MMCIF_MACKEREL_H
+
+#define PORT0CR (void __iomem *)0xe6051000
+#define PORT1CR (void __iomem *)0xe6051001
+#define PORT2CR (void __iomem *)0xe6051002
+#define PORT159CR (void __iomem *)0xe605009f
+
+#define PORTR031_000DR (void __iomem *)0xe6055000
+#define PORTL159_128DR (void __iomem *)0xe6054010
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS0-3
+ * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT0CR);
+ __raw_writeb(0x10, PORT1CR);
+ __raw_writeb(0x10, PORT2CR);
+ __raw_writeb(0x10, PORT159CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ unsigned a = 0, b = 0;
+
+ if (n < 3)
+ a = 1 << n;
+ else
+ b = 1 << 31;
+
+ __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
+ PORTR031_000DR);
+ __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
+ PORTL159_128DR);
+}
+
+#endif /* MMCIF_MACKEREL_H */
diff --git a/arch/arm/mach-shmobile/include/mach/mmcif.h b/arch/arm/mach-shmobile/include/mach/mmcif.h
new file mode 100644
index 0000000..f4dc327
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/mmcif.h
@@ -0,0 +1,18 @@
+#ifndef MMCIF_H
+#define MMCIF_H
+
+/**************************************************
+ *
+ * board specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_MACH_AP4EVB
+#include "mach/mmcif-ap4eb.h"
+#elif CONFIG_MACH_MACKEREL
+#include "mach/mmcif-mackerel.h"
+#else
+#error "unsupported board."
+#endif
+
+#endif /* MMCIF_H */
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 18febf9..98bc7ed 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
@@ -39,18 +39,43 @@
};
/* clock derived from 24 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_24m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@@ -76,36 +101,83 @@
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart synth configurations */
+static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -123,25 +195,35 @@
.en_reg_bit = UART_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -159,73 +241,155 @@
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0 configurations */
-static struct aux_clk_config gpt0_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_config,
+ .recalc = &follow_parent,
};
-/* gpt1 configurations */
-static struct aux_clk_config gpt1_config = {
+/* gpt1 synth clk configurations */
+static struct gpt_clk_config gpt1_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt1_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt1_synth_config,
+};
+
+static struct pclk_info gpt1_pclk_info[] = {
+ {
+ .pclk = &gpt1_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt1_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk configurations */
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@@ -245,26 +409,27 @@
.recalc = &follow_parent,
};
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
+/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
};
-/* clock derived from ahb clk */
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@@ -325,8 +490,17 @@
.recalc = &follow_parent,
};
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* emi clock */
+static struct clk emi_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* ssp clock */
-static struct clk ssp_clk = {
+static struct clk ssp0_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SSP_CLK_ENB,
@@ -343,14 +517,145 @@
static struct clk dummy_apb_pclk;
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+/* fsmc clock */
+static struct clk fsmc_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* uart1 clock */
+static struct clk uart1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart2 clock */
+static struct clk uart2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* clcd clock */
+static struct clk clcd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll3_48m_clk,
+ .recalc = &follow_parent,
+};
+
+/* sdhci clock */
+static struct clk sdhci_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* keyboard clock */
+static struct clk kbd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+#endif
+
+/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+/* uart3 clock */
+static struct clk uart3_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart4 clock */
+static struct clk uart4_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart5 clock */
+static struct clk uart5_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+/* can0 clock */
+static struct clk can0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* can1 clock */
+static struct clk can1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* i2c1 clock */
+static struct clk i2c1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* pwm clock */
+static struct clk pwm_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
/* clock derived from 32 KHz osc clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 24 MHz osc clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@@ -358,18 +663,22 @@
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .dev_id = "uart", .clk = &uart_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
{ .dev_id = "gpt1", .clk = &gpt1_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh", .clk = &usbh_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
- { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh_clk", .clk = &usbh_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
@@ -377,8 +686,50 @@
{ .dev_id = "c3", .clk = &c3_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp", .clk = &ssp_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "gpio", .clk = &gpio_clk},
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "physmap-flash", .clk = &emi_clk},
+#endif
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+ { .con_id = "fsmc", .clk = &fsmc_clk},
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "uart1", .clk = &uart1_clk},
+ { .dev_id = "uart2", .clk = &uart2_clk},
+#endif
+
+ /* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "sdhci", .clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+ /* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+ { .dev_id = "gpio1", .clk = &gpio1_clk},
+ { .dev_id = "keyboard", .clk = &kbd_clk},
+#endif
+
+ /* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+ { .dev_id = "uart3", .clk = &uart3_clk},
+ { .dev_id = "uart4", .clk = &uart4_clk},
+ { .dev_id = "uart5", .clk = &uart5_clk},
+
+#endif
+ /* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+ { .dev_id = "c_can_platform.0", .clk = &can0_clk},
+ { .dev_id = "c_can_platform.1", .clk = &can1_clk},
+ { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
+ { .dev_id = "pwm", .clk = &pwm_clk},
+#endif
};
void __init clk_init(void)
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 947625d..53da422 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,9 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index af7e02c..8e30636 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,11 +14,11 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
#include <plat/padmux.h>
/* spear3xx declarations */
@@ -33,14 +33,14 @@
/* Add spear3xx family device structure declarations here */
extern struct amba_device gpio_device;
extern struct amba_device uart_device;
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear3xx_timer;
/* Add spear3xx family function declarations here */
void __init clk_init(void);
+void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
@@ -129,12 +129,10 @@
extern struct pmx_dev pmx_telecom_dac;
extern struct pmx_dev pmx_telecom_i2s;
extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdio_4bit;
-extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_telecom_sdhci_4bit;
+extern struct pmx_dev pmx_telecom_sdhci_8bit;
extern struct pmx_dev pmx_gpio1;
-void spear300_pmx_init(void);
-
/* Add spear300 machine function declarations here */
void __init spear300_init(void);
@@ -154,8 +152,6 @@
extern struct pmx_dev pmx_rs485_0_1;
extern struct pmx_dev pmx_tdm0;
-void spear310_pmx_init(void);
-
/* Add spear310 machine function declarations here */
void __init spear310_init(void);
@@ -176,14 +172,14 @@
extern struct pmx_dev pmx_emi;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_sdhci;
extern struct pmx_dev pmx_i2s;
extern struct pmx_dev pmx_uart1;
extern struct pmx_dev pmx_uart1_modem;
extern struct pmx_dev pmx_uart2;
extern struct pmx_dev pmx_touchscreen;
extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_sdhci_led;
extern struct pmx_dev pmx_pwm0;
extern struct pmx_dev pmx_pwm1;
extern struct pmx_dev pmx_pwm2;
@@ -195,8 +191,6 @@
extern struct pmx_dev pmx_smii1;
extern struct pmx_dev pmx_i2c1;
-void spear320_pmx_init(void);
-
/* Add spear320 machine function declarations here */
void __init spear320_init(void);
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4a86e6a..4660c0d 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -14,6 +14,9 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 7f940b8..a1a7f48 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -69,7 +69,7 @@
#define IRQ_CLCD IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM
+#define IRQ_SDHCI IRQ_INTRCOMM_RAS_ARM
/* GPIO pins virtual irqs */
#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9)
@@ -115,7 +115,7 @@
#define VIRQ_SPP (VIRQ_START + 2)
/* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDIO IRQ_GEN_RAS_2
+#define IRQ_SDHCI IRQ_GEN_RAS_2
/* IRQs sharing IRQ_GEN_RAS_3 */
#define VIRQ_PLGPIO (VIRQ_START + 3)
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 38d767a..5bd8cd8 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,16 +14,16 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR3XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
@@ -33,7 +33,7 @@
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
@@ -44,16 +44,16 @@
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
@@ -63,10 +63,10 @@
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
@@ -85,34 +85,35 @@
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
@@ -122,42 +123,42 @@
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index dcca856..63fd983 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -14,124 +14,61 @@
#ifndef __MACH_SPEAR3XX_H
#define __MACH_SPEAR3XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear300.h>
#include <mach/spear310.h>
#include <mach/spear320.h>
-#define SPEAR3XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR3XX_ML_SDRAM_SIZE 0x40000000
+#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
-#define SPEAR3XX_ICM9_BASE 0xC0000000
-#define SPEAR3XX_ICM9_SIZE 0x10000000
+#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE 0xD0000000
-#define SPEAR3XX_ICM1_2_SIZE 0x10000000
-
-#define SPEAR3XX_ICM1_UART_BASE 0xD0000000
+#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
+#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_UART_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_ADC_BASE 0xD0080000
-#define SPEAR3XX_ICM1_ADC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SSP_BASE 0xD0100000
-#define SPEAR3XX_ICM1_SSP_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_I2C_BASE 0xD0180000
-#define SPEAR3XX_ICM1_I2C_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR3XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR3XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR3XX_ICM1_IRDA_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR3XX_ICM1_SRAM_SIZE 0x05800000
+#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
+#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
+#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
+#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE 0xD8800000
-#define SPEAR3XX_ICM2_HWACCEL0_SIZE 0x00800000
-
-#define SPEAR3XX_ICM2_HWACCEL1_BASE 0xD9000000
-#define SPEAR3XX_ICM2_HWACCEL1_SIZE 0x00800000
+#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
+#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE 0xE0000000
-#define SPEAR3XX_ICM4_SIZE 0x08000000
-
-#define SPEAR3XX_ICM4_MII_BASE 0xE0800000
-#define SPEAR3XX_ICM4_MII_SIZE 0x00800000
-
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR3XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR3XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR3XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE 0xE1800000
-#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR3XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR3XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR3XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE 0xF0000000
-#define SPEAR3XX_ICM3_ML1_2_SIZE 0x0F000000
-
-#define SPEAR3XX_ML1_TMR_BASE 0xF0000000
-#define SPEAR3XX_ML1_TMR_SIZE 0x00100000
-
-#define SPEAR3XX_ML1_VIC_BASE 0xF1100000
+#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
-#define SPEAR3XX_ML1_VIC_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR3XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR3XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR3XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_TMR0_BASE 0xFC800000
-#define SPEAR3XX_ICM3_TMR0_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR3XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR3XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR3XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
+#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_TMR1_BASE 0xFCB00000
-#define SPEAR3XX_ICM3_TMR1_SIZE 0x00080000
+#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
index ccaa765..c723515 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear300.h
@@ -17,11 +17,9 @@
#define __MACH_SPEAR300_H
/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE 0x50000000
-#define SPEAR300_TELECOM_SIZE 0x10000000
+#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
-#define SPEAR300_TELECOM_REG_SIZE 0x00010000
#define INT_ENB_MASK_REG 0x54
#define INT_STS_MASK_REG 0x58
#define IT_PERS_S_IRQ_MASK (1 << 0)
@@ -36,47 +34,20 @@
#define SHIRQ_RAS1_MASK 0x1FF
-#define SPEAR300_CLCD_BASE 0x60000000
-#define SPEAR300_CLCD_SIZE 0x10000000
-
-#define SPEAR300_SDIO_BASE 0x70000000
-#define SPEAR300_SDIO_SIZE 0x10000000
-
-#define SPEAR300_NAND_0_BASE 0x80000000
-#define SPEAR300_NAND_0_SIZE 0x04000000
-
-#define SPEAR300_NAND_1_BASE 0x84000000
-#define SPEAR300_NAND_1_SIZE 0x04000000
-
-#define SPEAR300_NAND_2_BASE 0x88000000
-#define SPEAR300_NAND_2_SIZE 0x04000000
-
-#define SPEAR300_NAND_3_BASE 0x8c000000
-#define SPEAR300_NAND_3_SIZE 0x04000000
-
-#define SPEAR300_NOR_0_BASE 0x90000000
-#define SPEAR300_NOR_0_SIZE 0x01000000
-
-#define SPEAR300_NOR_1_BASE 0x91000000
-#define SPEAR300_NOR_1_SIZE 0x01000000
-
-#define SPEAR300_NOR_2_BASE 0x92000000
-#define SPEAR300_NOR_2_SIZE 0x01000000
-
-#define SPEAR300_NOR_3_BASE 0x93000000
-#define SPEAR300_NOR_3_SIZE 0x01000000
-
-#define SPEAR300_FSMC_BASE 0x94000000
-#define SPEAR300_FSMC_SIZE 0x05000000
-
-#define SPEAR300_SOC_CONFIG_BASE 0x99000000
-#define SPEAR300_SOC_CONFIG_SIZE 0x00000008
-
-#define SPEAR300_KEYBOARD_BASE 0xA0000000
-#define SPEAR300_KEYBOARD_SIZE 0x09000000
-
-#define SPEAR300_GPIO_BASE 0xA9000000
-#define SPEAR300_GPIO_SIZE 0x07000000
+#define SPEAR300_CLCD_BASE UL(0x60000000)
+#define SPEAR300_SDHCI_BASE UL(0x70000000)
+#define SPEAR300_NAND_0_BASE UL(0x80000000)
+#define SPEAR300_NAND_1_BASE UL(0x84000000)
+#define SPEAR300_NAND_2_BASE UL(0x88000000)
+#define SPEAR300_NAND_3_BASE UL(0x8c000000)
+#define SPEAR300_NOR_0_BASE UL(0x90000000)
+#define SPEAR300_NOR_1_BASE UL(0x91000000)
+#define SPEAR300_NOR_2_BASE UL(0x92000000)
+#define SPEAR300_NOR_3_BASE UL(0x93000000)
+#define SPEAR300_FSMC_BASE UL(0x94000000)
+#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
+#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
+#define SPEAR300_GPIO_BASE UL(0xA9000000)
#endif /* __MACH_SPEAR300_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
index b27bb8a..1e85347 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear310.h
@@ -16,30 +16,18 @@
#ifndef __MACH_SPEAR310_H
#define __MACH_SPEAR310_H
-#define SPEAR310_NAND_BASE 0x40000000
-#define SPEAR310_NAND_SIZE 0x04000000
+#define SPEAR310_NAND_BASE UL(0x40000000)
+#define SPEAR310_FSMC_BASE UL(0x44000000)
+#define SPEAR310_UART1_BASE UL(0xB2000000)
+#define SPEAR310_UART2_BASE UL(0xB2080000)
+#define SPEAR310_UART3_BASE UL(0xB2100000)
+#define SPEAR310_UART4_BASE UL(0xB2180000)
+#define SPEAR310_UART5_BASE UL(0xB2200000)
+#define SPEAR310_HDLC_BASE UL(0xB2800000)
+#define SPEAR310_RS485_0_BASE UL(0xB3000000)
+#define SPEAR310_RS485_1_BASE UL(0xB3800000)
+#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
-#define SPEAR310_FSMC_BASE 0x44000000
-#define SPEAR310_FSMC_SIZE 0x01000000
-
-#define SPEAR310_UART1_BASE 0xB2000000
-#define SPEAR310_UART2_BASE 0xB2080000
-#define SPEAR310_UART3_BASE 0xB2100000
-#define SPEAR310_UART4_BASE 0xB2180000
-#define SPEAR310_UART5_BASE 0xB2200000
-#define SPEAR310_UART_SIZE 0x00080000
-
-#define SPEAR310_HDLC_BASE 0xB2800000
-#define SPEAR310_HDLC_SIZE 0x00800000
-
-#define SPEAR310_RS485_0_BASE 0xB3000000
-#define SPEAR310_RS485_0_SIZE 0x00800000
-
-#define SPEAR310_RS485_1_BASE 0xB3800000
-#define SPEAR310_RS485_1_SIZE 0x00800000
-
-#define SPEAR310_SOC_CONFIG_BASE 0xB4000000
-#define SPEAR310_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define SMII0_IRQ_MASK (1 << 0)
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
index cacf17a..940f0d8 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -16,54 +16,25 @@
#ifndef __MACH_SPEAR320_H
#define __MACH_SPEAR320_H
-#define SPEAR320_EMI_CTRL_BASE 0x40000000
-#define SPEAR320_EMI_CTRL_SIZE 0x08000000
+#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
+#define SPEAR320_FSMC_BASE UL(0x4C000000)
+#define SPEAR320_NAND_BASE UL(0x50000000)
+#define SPEAR320_I2S_BASE UL(0x60000000)
+#define SPEAR320_SDHCI_BASE UL(0x70000000)
+#define SPEAR320_CLCD_BASE UL(0x90000000)
+#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
+#define SPEAR320_CAN0_BASE UL(0xA1000000)
+#define SPEAR320_CAN1_BASE UL(0xA2000000)
+#define SPEAR320_UART1_BASE UL(0xA3000000)
+#define SPEAR320_UART2_BASE UL(0xA4000000)
+#define SPEAR320_SSP0_BASE UL(0xA5000000)
+#define SPEAR320_SSP1_BASE UL(0xA6000000)
+#define SPEAR320_I2C_BASE UL(0xA7000000)
+#define SPEAR320_PWM_BASE UL(0xA8000000)
+#define SPEAR320_SMII0_BASE UL(0xAA000000)
+#define SPEAR320_SMII1_BASE UL(0xAB000000)
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-#define SPEAR320_FSMC_BASE 0x4C000000
-#define SPEAR320_FSMC_SIZE 0x01000000
-
-#define SPEAR320_I2S_BASE 0x60000000
-#define SPEAR320_I2S_SIZE 0x10000000
-
-#define SPEAR320_SDIO_BASE 0x70000000
-#define SPEAR320_SDIO_SIZE 0x10000000
-
-#define SPEAR320_CLCD_BASE 0x90000000
-#define SPEAR320_CLCD_SIZE 0x10000000
-
-#define SPEAR320_PAR_PORT_BASE 0xA0000000
-#define SPEAR320_PAR_PORT_SIZE 0x01000000
-
-#define SPEAR320_CAN0_BASE 0xA1000000
-#define SPEAR320_CAN0_SIZE 0x01000000
-
-#define SPEAR320_CAN1_BASE 0xA2000000
-#define SPEAR320_CAN1_SIZE 0x01000000
-
-#define SPEAR320_UART1_BASE 0xA3000000
-#define SPEAR320_UART2_BASE 0xA4000000
-#define SPEAR320_UART_SIZE 0x01000000
-
-#define SPEAR320_SSP0_BASE 0xA5000000
-#define SPEAR320_SSP0_SIZE 0x01000000
-
-#define SPEAR320_SSP1_BASE 0xA6000000
-#define SPEAR320_SSP1_SIZE 0x01000000
-
-#define SPEAR320_I2C_BASE 0xA7000000
-#define SPEAR320_I2C_SIZE 0x01000000
-
-#define SPEAR320_PWM_BASE 0xA8000000
-#define SPEAR320_PWM_SIZE 0x01000000
-
-#define SPEAR320_SMII0_BASE 0xAA000000
-#define SPEAR320_SMII0_SIZE 0x01000000
-
-#define SPEAR320_SMII1_BASE 0xAB000000
-#define SPEAR320_SMII1_SIZE 0x01000000
-
-#define SPEAR320_SOC_CONFIG_BASE 0xB4000000
-#define SPEAR320_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define INT_CLR_MASK_REG 0x04
@@ -74,7 +45,7 @@
#define EMI_IRQ_MASK (1 << 7)
#define CLCD_IRQ_MASK (1 << 8)
#define SPP_IRQ_MASK (1 << 9)
-#define SDIO_IRQ_MASK (1 << 10)
+#define SDHCI_IRQ_MASK (1 << 10)
#define CAN_U_IRQ_MASK (1 << 11)
#define CAN_L_IRQ_MASK (1 << 12)
#define UART1_IRQ_MASK (1 << 13)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 5aa2d54..2697e65 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -15,9 +15,9 @@
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -310,7 +310,7 @@
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -323,14 +323,14 @@
},
};
-struct pmx_dev pmx_telecom_sdio_4bit = {
- .name = "telecom_sdio_4bit",
- .modes = pmx_telecom_sdio_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+ .name = "telecom_sdhci_4bit",
+ .modes = pmx_telecom_sdhci_4bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -342,10 +342,10 @@
},
};
-struct pmx_dev pmx_telecom_sdio_8bit = {
- .name = "telecom_sdio_8bit",
- .modes = pmx_telecom_sdio_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+ .name = "telecom_sdhci_8bit",
+ .modes = pmx_telecom_sdhci_8bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
.enb_on_reset = 1,
};
@@ -370,26 +370,6 @@
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR_GPIO1_INT_BASE,
-};
-
-struct amba_device gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {VIRQ_GPIO1, NO_IRQ},
-};
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -443,6 +423,26 @@
},
};
+/* Add spear300 specific devices here */
+/* arm gpio1 device registration */
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = &gpio1_plat_data,
+ },
+ .res = {
+ .start = SPEAR300_GPIO_BASE,
+ .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
/* spear300 routines */
void __init spear300_init(void)
{
@@ -452,17 +452,21 @@
spear3xx_init();
/* shared irq registration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
printk(KERN_ERR "Error registering Shared IRQ\n");
}
-}
-void spear300_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no"
+ ": %d\n", ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
}
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index bb21db1..42d2253 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -28,7 +28,7 @@
/* spear300 specific devices */
&pmx_fsmc_2_chips,
&pmx_clcd,
- &pmx_telecom_sdio_4bit,
+ &pmx_telecom_sdhci_4bit,
&pmx_gpio1,
};
@@ -51,14 +51,13 @@
{
unsigned int i;
- /* call spear300 machine init function */
- spear300_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear300_init */
pmx_driver.mode = &photo_frame_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear300_pmx_init();
+
+ /* call spear300 machine init function */
+ spear300_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -72,6 +71,6 @@
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 53b41b5..5c0a67b 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -13,9 +13,9 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -139,8 +139,6 @@
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear310 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -257,6 +255,8 @@
},
};
+/* Add spear310 specific devices here */
+
/* spear310 routines */
void __init spear310_init(void)
{
@@ -267,7 +267,7 @@
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
@@ -293,10 +293,11 @@
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear310_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
- SPEAR310_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 7facf66..2d7f333 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -58,14 +58,13 @@
{
unsigned int i;
- /* call spear310 machine init function */
- spear310_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear310_init */
pmx_driver.mode = NULL;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear310_pmx_init();
+
+ /* call spear310 machine init function */
+ spear310_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -79,6 +78,6 @@
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 88b4652..741c1f4 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -13,9 +13,9 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -110,7 +110,7 @@
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_modes[] = {
+struct pmx_dev_mode pmx_sdhci_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
SMALL_PRINTERS_MODE,
@@ -118,10 +118,10 @@
},
};
-struct pmx_dev pmx_sdio = {
- .name = "sdio",
- .modes = pmx_sdio_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_modes),
+struct pmx_dev pmx_sdhci = {
+ .name = "sdhci",
+ .modes = pmx_sdhci_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_modes),
.enb_on_reset = 1,
};
@@ -215,17 +215,17 @@
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_led_modes[] = {
+struct pmx_dev_mode pmx_sdhci_led_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
-struct pmx_dev pmx_sdio_led = {
- .name = "sdio_led",
- .modes = pmx_sdio_led_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+struct pmx_dev pmx_sdhci_led = {
+ .name = "sdhci_led",
+ .modes = pmx_sdhci_led_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
.enb_on_reset = 1,
};
@@ -384,8 +384,6 @@
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear320 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -510,6 +508,8 @@
},
};
+/* Add spear320 specific devices here */
+
/* spear320 routines */
void __init spear320_init(void)
{
@@ -520,7 +520,7 @@
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
@@ -540,10 +540,11 @@
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear320_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
- SPEAR320_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 62ac685..8213e4b 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
@@ -26,7 +26,7 @@
/* spear320 specific devices */
&pmx_fsmc,
- &pmx_sdio,
+ &pmx_sdhci,
&pmx_i2s,
&pmx_uart1,
&pmx_uart2,
@@ -55,14 +55,13 @@
{
unsigned int i;
- /* call spear320 machine init function */
- spear320_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear320_init */
pmx_driver.mode = &auto_net_mii_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear320_pmx_init();
+
+ /* call spear320 machine init function */
+ spear320_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -76,6 +75,6 @@
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 52f553c..d3ba8ca 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -19,7 +19,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear3xx machines common devices here */
/* gpio device registration */
@@ -35,7 +35,7 @@
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -48,7 +48,7 @@
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+ .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
@@ -71,22 +71,22 @@
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SPEAR3XX_ICM1_UART_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SPEAR3XX_ML1_VIC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SPEAR3XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
@@ -523,26 +523,35 @@
.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
.enb_on_reset = 1,
};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-#endif
-
-/* spear padmux initialization function */
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+static void __init spear3xx_timer_init(void)
{
- int ret = 0;
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
- /* pad mux initialization */
- pmx_driver->base = ioremap(base, size);
- if (!pmx_driver->base) {
- ret = -ENOMEM;
- goto pmx_fail;
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
}
- ret = pmx_register(pmx_driver);
- iounmap(pmx_driver->base);
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
+ }
-pmx_fail:
- if (ret)
- printk(KERN_ERR "padmux: registration failed. err no: %d\n",
- ret);
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_timer();
}
+
+struct sys_timer spear3xx_timer = {
+ .init = spear3xx_timer_init,
+};
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 36ff056..88b748b 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
@@ -39,18 +39,43 @@
};
/* clock derived from 30 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_30m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
@@ -76,31 +101,83 @@
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_synth_config = {
+ .synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &uart_synth_config,
+};
+
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -112,19 +189,13 @@
.pclk_sel_mask = UART_CLK_MASK,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
- .synth_reg = UART_CLK_SYNT,
-};
-
/* uart0 clock */
static struct clk uart0_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART0_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* uart1 clock */
@@ -133,25 +204,35 @@
.en_reg_bit = UART1_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -169,25 +250,35 @@
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
};
/* clcd configurations */
-static struct aux_clk_config clcd_config = {
+static struct aux_clk_config clcd_synth_config = {
.synth_reg = CLCD_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk clcd_synth_clk = {
+ .en_reg = CLCD_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &clcd_synth_config,
};
/* clcd parents */
static struct pclk_info clcd_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &clcd_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
@@ -205,82 +296,173 @@
.en_reg_bit = CLCD_CLK_ENB,
.pclk_sel = &clcd_pclk_sel,
.pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &clcd_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0_1 configurations */
-static struct aux_clk_config gpt0_1_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 ARM1 subsystem timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
+};
+
+
+/* Note: gpt0 and gpt1 share same parent clocks */
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk config*/
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
-/* gpt3 configurations */
-static struct aux_clk_config gpt3_config = {
+/* gpt3 synth clk config*/
+static struct gpt_clk_config gpt3_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt3_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt3_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt3_pclk_info[] = {
+ {
+ .pclk = &gpt3_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt3_pclk_sel = {
+ .pclk_info = gpt3_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt3 timer clock */
static struct clk gpt3_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT3_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt3_pclk_sel,
.pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt3_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
@@ -309,18 +491,26 @@
};
/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
@@ -432,12 +622,12 @@
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
/* clock derived from 32 KHz os clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 30 MHz os clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
@@ -445,6 +635,12 @@
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
+ { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
@@ -454,22 +650,22 @@
{ .dev_id = "gpt2", .clk = &gpt2_clk},
{ .dev_id = "gpt3", .clk = &gpt3_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh0", .clk = &usbh0_clk},
- { .dev_id = "usbh1", .clk = &usbh1_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
+ { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc", .clk = &fsmc_clk},
+ { .con_id = "fsmc", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp0", .clk = &ssp0_clk},
- { .dev_id = "ssp1", .clk = &ssp1_clk},
- { .dev_id = "ssp2", .clk = &ssp2_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 9eaecae..8a0b0ed 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,9 +11,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 16205a5..94cf4a6 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -14,11 +14,11 @@
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
/*
* Each GPT has 2 timer channels
@@ -31,9 +31,10 @@
/* Add spear6xx family device structure declarations here */
extern struct amba_device gpio_device[];
extern struct amba_device uart_device[];
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear6xx_timer;
/* Add spear6xx family function declarations here */
+void __init spear_setup_timer(void);
void __init spear6xx_map_io(void);
void __init spear6xx_init_irq(void);
void __init spear6xx_init(void);
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 7545116..0b3f96a 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -14,8 +14,10 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#endif /* __MACH_HARDWARE_H */
-
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 0390803..68c20a0 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,16 +14,16 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR6XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
@@ -33,7 +33,7 @@
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
@@ -44,16 +44,16 @@
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 0x3
@@ -66,10 +66,10 @@
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
@@ -95,34 +95,35 @@
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
@@ -132,42 +133,42 @@
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index a835f5b..7fd6215 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -14,153 +14,70 @@
#ifndef __MACH_SPEAR6XX_H
#define __MACH_SPEAR6XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear600.h>
-#define SPEAR6XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR6XX_ML_SDRAM_SIZE 0x40000000
-
+#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
-#define SPEAR6XX_ICM1_BASE 0xD0000000
-#define SPEAR6XX_ICM1_SIZE 0x08000000
+#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-#define SPEAR6XX_ICM1_UART0_BASE 0xD0000000
+#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-#define SPEAR6XX_ICM1_UART0_SIZE 0x00080000
-#define SPEAR6XX_ICM1_UART1_BASE 0xD0080000
-#define SPEAR6XX_ICM1_UART1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP0_BASE 0xD0100000
-#define SPEAR6XX_ICM1_SSP0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP1_BASE 0xD0180000
-#define SPEAR6XX_ICM1_SSP1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_I2C_BASE 0xD0200000
-#define SPEAR6XX_ICM1_I2C_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR6XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR6XX_ICM1_IRDA_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_FSMC_BASE 0xD1800000
-#define SPEAR6XX_ICM1_FSMC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_NAND_BASE 0xD2000000
-#define SPEAR6XX_ICM1_NAND_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR6XX_ICM1_SRAM_SIZE 0x00800000
+#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
+#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
+#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
+#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
+#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
+#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
+#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE 0xD8000000
-#define SPEAR6XX_ICM2_SIZE 0x08000000
-
-#define SPEAR6XX_ICM2_TMR0_BASE 0xD8000000
-#define SPEAR6XX_ICM2_TMR0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_TMR1_BASE 0xD8080000
-#define SPEAR6XX_ICM2_TMR1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_GPIO_BASE 0xD8100000
-#define SPEAR6XX_ICM2_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_SPI2_BASE 0xD8180000
-#define SPEAR6XX_ICM2_SPI2_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_ADC_BASE 0xD8200000
-#define SPEAR6XX_ICM2_ADC_SIZE 0x00080000
+#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
+#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
+#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
+#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
/* ML-1, 2 - Multi Layer CPU Subsystem */
-#define SPEAR6XX_ML_CPU_BASE 0xF0000000
-#define SPEAR6XX_ML_CPU_SIZE 0x08000000
-
-#define SPEAR6XX_CPU_TMR_BASE 0xF0000000
-#define SPEAR6XX_CPU_TMR_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_GPIO_BASE 0xF0100000
-#define SPEAR6XX_CPU_GPIO_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_SEC_BASE 0xF1000000
+#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
+#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_SEC_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_PRI_BASE 0xF1100000
+#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SIZE 0x08000000
-
-#define SPEAR6XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR6XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR6XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_CLCD_BASE 0xFC200000
-#define SPEAR6XX_ICM3_CLCD_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR6XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_TMR_BASE 0xFC800000
-#define SPEAR6XX_ICM3_TMR_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR6XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR6XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR6XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
+#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
+#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR6XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SPEAR6XX_ICM3_MISC_REG_SIZE 0x00080000
/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE 0xE0000000
-#define SPEAR6XX_ICM4_SIZE 0x08000000
-
-#define SPEAR6XX_ICM4_GMAC_BASE 0xE0800000
-#define SPEAR6XX_ICM4_GMAC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR6XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR6XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR6XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE 0xE1800000
-#define SPEAR6XX_ICM4_USB_EHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR6XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE 0xE2000000
-#define SPEAR6XX_ICM4_USB_EHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR6XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR6XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
index 5c484c4..d0e6eea 100644
--- a/arch/arm/mach-spear6xx/spear600.c
+++ b/arch/arm/mach-spear6xx/spear600.c
@@ -14,7 +14,7 @@
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear600 specific devices here */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index daff8d0..f19cefe 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -14,7 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
static struct amba_device *amba_devs[] __initdata = {
&gpio_device[0],
@@ -46,6 +46,6 @@
.boot_params = 0x00000100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index f2fe14e..9818129 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -18,9 +18,9 @@
#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include <mach/irqs.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/* Add spear6xx machines common devices here */
/* uart device registration */
@@ -31,8 +31,7 @@
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE +
- SPEAR6XX_ICM1_UART0_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
@@ -42,8 +41,7 @@
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE +
- SPEAR6XX_ICM1_UART1_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
@@ -72,8 +70,7 @@
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
- .end = SPEAR6XX_CPU_GPIO_BASE +
- SPEAR6XX_CPU_GPIO_SIZE - 1,
+ .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
@@ -84,8 +81,7 @@
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
- .end = SPEAR6XX_ICM3_GPIO_BASE +
- SPEAR6XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -96,8 +92,7 @@
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
- .end = SPEAR6XX_ICM2_GPIO_BASE +
- SPEAR6XX_ICM2_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
@@ -122,27 +117,27 @@
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SPEAR6XX_ICM1_UART0_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SPEAR6XX_CPU_VIC_PRI_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SPEAR6XX_CPU_VIC_SEC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_BASE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
@@ -155,3 +150,34 @@
/* This will initialize clock framework */
clk_init();
}
+
+static void __init spear6xx_timer_init(void)
+{
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
+
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
+ }
+
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_timer();
+}
+
+struct sys_timer spear6xx_timer = {
+ .init = spear6xx_timer_init,
+};
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 66ad276..04c7798 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -57,5 +57,6 @@
const struct matrix_keymap_data *keymap_data;
bool wakeup;
+ bool use_fn_map;
};
#endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 247caa3..203b986 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@
select ARM_GIC
select HAS_MTU
select NOMADIK_GPIO
+ select ARM_ERRATA_753970
menu "Ux500 SoC"
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
new file mode 100644
index 0000000..2c20a34
--- /dev/null
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -0,0 +1,73 @@
+if ARCH_VT8500
+
+config VTWM_VERSION_VT8500
+ bool
+
+config VTWM_VERSION_WM8505
+ bool
+
+config MACH_BV07
+ bool "Benign BV07-8500 Mini Netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_VT8500
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a VIA VT8500 chip.
+
+config MACH_WM8505_7IN_NETBOOK
+ bool "WM8505 7-inch generic netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_WM8505
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a WonderMedia WM8505 chip.
+
+comment "LCD panel size"
+
+config WMT_PANEL_800X480
+ bool "7-inch with 800x480 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ default y
+ help
+ These are found in most of the netbooks in generic cases, as
+ well as in Eken M001 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x480' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_800X600
+ bool "8-inch with 800x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M003 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X576
+ bool "10-inch with 1024x576 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in CherryPal netbooks and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x576' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X600
+ bool "10-inch with 1024x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M006 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+endif
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
new file mode 100644
index 0000000..81aedb7
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile
@@ -0,0 +1,9 @@
+obj-y += devices.o gpio.o irq.o timer.o
+
+obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
+obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
+
+obj-$(CONFIG_MACH_BV07) += bv07.o
+obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot
new file mode 100644
index 0000000..a8acc4e
--- /dev/null
+++ b/arch/arm/mach-vt8500/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x01000000
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
new file mode 100644
index 0000000..94a261d
--- /dev/null
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/bv07.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_lcdc,
+ &vt8500_device_ehci,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init bv07_init(void)
+{
+#ifdef CONFIG_FB_VT8500
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ vt8500_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(BV07, "Benign BV07 Mini Netbook")
+ .boot_params = 0x00000100,
+ .reserve = vt8500_reserve_mem,
+ .map_io = vt8500_map_io,
+ .init_irq = vt8500_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = bv07_init,
+MACHINE_END
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c
new file mode 100644
index 0000000..19519ae
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-vt8500.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-vt8500/devices-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/vt8500_regs.h>
+#include <mach/vt8500_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init vt8500_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
+ tmp[1] = wmt_irq_res(IRQ_LCDC);
+ wmt_res_add(&vt8500_device_lcdc, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init vt8500_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = VT8500_IC_BASE;
+ wmt_gpio_base = VT8500_GPIO_BASE;
+ wmt_pmc_base = VT8500_PMC_BASE;
+ wmt_i8042_base = VT8500_PS2_BASE;
+
+ wmt_nr_irqs = VT8500_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init vt8500_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ vt8500_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c
new file mode 100644
index 0000000..db4594e
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices-wm8505.c
@@ -0,0 +1,99 @@
+/* linux/arch/arm/mach-vt8500/devices-wm8505.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/wm8505_regs.h>
+#include <mach/wm8505_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init wm8505_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
+ wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART4);
+ wmt_res_add(&vt8500_device_uart4, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART5);
+ wmt_res_add(&vt8500_device_uart5, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init wm8505_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = WM8505_IC_BASE;
+ wmt_sic_base = WM8505_SIC_BASE;
+ wmt_gpio_base = WM8505_GPIO_BASE;
+ wmt_pmc_base = WM8505_PMC_BASE;
+ wmt_i8042_base = WM8505_PS2_BASE;
+
+ wmt_nr_irqs = WM8505_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init wm8505_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ wm8505_set_externs();
+}
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
new file mode 100644
index 0000000..1fcdc36
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.c
@@ -0,0 +1,270 @@
+/* linux/arch/arm/mach-vt8500/devices.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/vt8500fb.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+/* These can't use resources currently */
+unsigned long wmt_ic_base __initdata;
+unsigned long wmt_sic_base __initdata;
+unsigned long wmt_gpio_base __initdata;
+unsigned long wmt_pmc_base __initdata;
+unsigned long wmt_i8042_base __initdata;
+
+int wmt_nr_irqs __initdata;
+int wmt_timer_irq __initdata;
+int wmt_gpio_ext_irq[8] __initdata;
+
+/* Should remain accessible after init.
+ * i8042 driver desperately calls for attention...
+ */
+int wmt_i8042_kbd_irq;
+int wmt_i8042_aux_irq;
+
+static u64 fb_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_lcdc = {
+ .name = "vt8500-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_wm8505_fb = {
+ .name = "wm8505-fb",
+ .id = 0,
+};
+
+/* Smallest to largest */
+static struct vt8500fb_platform_data panels[] = {
+#ifdef CONFIG_WMT_PANEL_800X480
+{
+ .xres_virtual = 800,
+ .yres_virtual = 480 * 2,
+ .mode = {
+ .name = "800x480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_800X600
+{
+ .xres_virtual = 800,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "800x600",
+ .xres = 800,
+ .yres = 600,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X576
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 576 * 2,
+ .mode = {
+ .name = "1024x576",
+ .xres = 1024,
+ .yres = 576,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X600
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "1024x600",
+ .xres = 1024,
+ .yres = 600,
+ .left_margin = 66,
+ .right_margin = 2,
+ .upper_margin = 19,
+ .lower_margin = 1,
+ .hsync_len = 23,
+ .vsync_len = 8,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+};
+
+static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
+
+static int __init panel_setup(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(panels); i++) {
+ if (strcmp(panels[i].mode.name, str) == 0) {
+ current_panel_idx = i;
+ break;
+ }
+ }
+ return 0;
+}
+
+early_param("panel", panel_setup);
+
+static inline void preallocate_fb(struct vt8500fb_platform_data *p,
+ unsigned long align) {
+ p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
+ (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
+ (8 / p->bpp) + 1));
+ p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
+ align);
+ p->video_mem_virt = phys_to_virt(p->video_mem_phys);
+}
+
+struct platform_device vt8500_device_uart0 = {
+ .name = "vt8500_serial",
+ .id = 0,
+};
+
+struct platform_device vt8500_device_uart1 = {
+ .name = "vt8500_serial",
+ .id = 1,
+};
+
+struct platform_device vt8500_device_uart2 = {
+ .name = "vt8500_serial",
+ .id = 2,
+};
+
+struct platform_device vt8500_device_uart3 = {
+ .name = "vt8500_serial",
+ .id = 3,
+};
+
+struct platform_device vt8500_device_uart4 = {
+ .name = "vt8500_serial",
+ .id = 4,
+};
+
+struct platform_device vt8500_device_uart5 = {
+ .name = "vt8500_serial",
+ .id = 5,
+};
+
+static u64 ehci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_ehci = {
+ .name = "vt8500-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_ge_rops = {
+ .name = "wmt_ge_rops",
+ .id = -1,
+};
+
+struct platform_device vt8500_device_pwm = {
+ .name = "vt8500-pwm",
+ .id = 0,
+};
+
+static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
+ .pwm_id = 0,
+ .max_brightness = 128,
+ .dft_brightness = 70,
+ .pwm_period_ns = 250000, /* revisit when clocks are implemented */
+};
+
+struct platform_device vt8500_device_pwmbl = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &vt8500_pwmbl_data,
+ },
+};
+
+struct platform_device vt8500_device_rtc = {
+ .name = "vt8500-rtc",
+ .id = 0,
+};
+
+struct map_desc wmt_io_desc[] __initdata = {
+ /* SoC MMIO registers */
+ [0] = {
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0xd8000000),
+ .length = 0x00390000, /* max of all chip variants */
+ .type = MT_DEVICE
+ },
+ /* PCI I/O space, numbers tied to those in <mach/io.h> */
+ [1] = {
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0xc0000000),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ },
+};
+
+void __init vt8500_reserve_mem(void)
+{
+#ifdef CONFIG_FB_VT8500
+ panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
+ preallocate_fb(&panels[current_panel_idx], SZ_4M);
+ vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
+
+void __init wm8505_reserve_mem(void)
+{
+#if defined CONFIG_FB_WM8505
+ panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
+ preallocate_fb(&panels[current_panel_idx], 32);
+ vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
new file mode 100644
index 0000000..188d4e1
--- /dev/null
+++ b/arch/arm/mach-vt8500/devices.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-vt8500/devices.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
+#define __ARCH_ARM_MACH_VT8500_DEVICES_H
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+void __init vt8500_init_irq(void);
+void __init wm8505_init_irq(void);
+void __init vt8500_map_io(void);
+void __init wm8505_map_io(void);
+void __init vt8500_reserve_mem(void);
+void __init wm8505_reserve_mem(void);
+void __init vt8500_gpio_init(void);
+void __init vt8500_set_resources(void);
+void __init wm8505_set_resources(void);
+
+extern unsigned long wmt_ic_base __initdata;
+extern unsigned long wmt_sic_base __initdata;
+extern unsigned long wmt_gpio_base __initdata;
+extern unsigned long wmt_pmc_base __initdata;
+
+extern int wmt_nr_irqs __initdata;
+extern int wmt_timer_irq __initdata;
+extern int wmt_gpio_ext_irq[8] __initdata;
+
+extern struct map_desc wmt_io_desc[2] __initdata;
+
+static inline struct resource wmt_mmio_res(u32 start, u32 size)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_MEM,
+ .start = start,
+ .end = start + size - 1,
+ };
+
+ return tmp;
+}
+
+static inline struct resource wmt_irq_res(int irq)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_IRQ,
+ .start = irq,
+ .end = irq,
+ };
+
+ return tmp;
+}
+
+static inline void wmt_res_add(struct platform_device *pdev,
+ const struct resource *res, unsigned int num)
+{
+ if (unlikely(platform_device_add_resources(pdev, res, num)))
+ pr_err("Failed to assign resources\n");
+}
+
+extern struct sys_timer vt8500_timer;
+
+extern struct platform_device vt8500_device_uart0;
+extern struct platform_device vt8500_device_uart1;
+extern struct platform_device vt8500_device_uart2;
+extern struct platform_device vt8500_device_uart3;
+extern struct platform_device vt8500_device_uart4;
+extern struct platform_device vt8500_device_uart5;
+
+extern struct platform_device vt8500_device_lcdc;
+extern struct platform_device vt8500_device_wm8505_fb;
+extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_ge_rops;
+extern struct platform_device vt8500_device_pwm;
+extern struct platform_device vt8500_device_pwmbl;
+extern struct platform_device vt8500_device_rtc;
+#endif
diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c
new file mode 100644
index 0000000..2bcc0ec
--- /dev/null
+++ b/arch/arm/mach-vt8500/gpio.c
@@ -0,0 +1,240 @@
+/* linux/arch/arm/mach-vt8500/gpio.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "devices.h"
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+#define ENABLE_REGS 0x0
+#define DIRECTION_REGS 0x20
+#define OUTVALUE_REGS 0x40
+#define INVALUE_REGS 0x60
+
+#define EXT_REGOFF 0x1c
+
+static void __iomem *regbase;
+
+struct vt8500_gpio_chip {
+ struct gpio_chip chip;
+ unsigned int shift;
+ unsigned int regoff;
+};
+
+static int gpio_to_irq_map[8];
+
+static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+}
+
+static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ }
+ return 0;
+}
+
+static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+ return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
+ >> vt8500_chip->shift >> offset) & 1;
+}
+
+static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
+
+ if (value)
+ val |= (1 << vt8500_chip->shift << offset);
+ else
+ val &= ~(1 << vt8500_chip->shift << offset);
+
+ writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
+}
+
+#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \
+{ \
+ .chip = { \
+ .label = __name, \
+ .request = vt8500_muxed_gpio_request, \
+ .free = vt8500_muxed_gpio_free, \
+ .direction_input = vt8500_muxed_gpio_direction_input, \
+ .direction_output = vt8500_muxed_gpio_direction_output, \
+ .get = vt8500_muxed_gpio_get_value, \
+ .set = vt8500_muxed_gpio_set_value, \
+ .can_sleep = 0, \
+ .base = __base, \
+ .ngpio = __num, \
+ }, \
+ .shift = __shift, \
+ .regoff = __off, \
+}
+
+static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
+ VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4),
+ VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4),
+ VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4),
+ VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4),
+ VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4),
+ VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2),
+
+ VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11),
+ VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7),
+ VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2),
+ VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2),
+
+ VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20),
+ VT8500_GPIO_BANK("see", 20, 0x8, 72, 4),
+ VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7),
+
+ VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19),
+
+ VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11),
+
+ VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23),
+};
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val &= ~(1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+ return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val |= (1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+ val |= (1 << offset);
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+ }
+ return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+
+ if (value)
+ val |= (1 << offset);
+ else
+ val &= ~(1 << offset);
+
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+}
+
+static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset > 7)
+ return -EINVAL;
+
+ return gpio_to_irq_map[offset];
+}
+
+static struct gpio_chip vt8500_external_gpios = {
+ .label = "extgpio",
+ .direction_input = vt8500_gpio_direction_input,
+ .direction_output = vt8500_gpio_direction_output,
+ .get = vt8500_gpio_get_value,
+ .set = vt8500_gpio_set_value,
+ .to_irq = vt8500_gpio_to_irq,
+ .can_sleep = 0,
+ .base = 0,
+ .ngpio = 8,
+};
+
+void __init vt8500_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
+
+ regbase = ioremap(wmt_gpio_base, SZ_64K);
+ if (!regbase) {
+ printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
+ return;
+ }
+
+ gpiochip_add(&vt8500_external_gpios);
+
+ for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
+ gpiochip_add(&vt8500_muxed_gpios[i].chip);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
new file mode 100644
index 0000000..f119162
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart, rp, rv
+ mov \rp, #0x00200000
+ orr \rv, \rp, #0xf8000000
+ orr \rp, \rp, #0xd8000000
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x1c]
+ ands \rd, \rd, #0x2
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
new file mode 100644
index 0000000..92684c7
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for VIA VT8500
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ physical 0xd8140000 is virtual 0xf8140000
+ mov \base, #0xf8000000
+ orr \base, \base, #0x00140000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base]
+ cmp \irqnr, #63 @ may be false positive, check interrupt status
+ bne 1001f
+ ldr \irqstat, [\base, #0x84]
+ ands \irqstat, #0x80000000
+ moveq \irqnr, #0
+1001:
+ .endm
+
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
new file mode 100644
index 0000000..94ff276
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h
new file mode 100644
index 0000000..db4163f
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/hardware.h
@@ -0,0 +1,12 @@
+/* arch/arm/mach-vt8500/include/mach/hardware.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h
new file mode 100644
index 0000000..cd7143c
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/i8042.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-vt8500/include/mach/i8042.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+extern unsigned long wmt_i8042_base __initdata;
+extern int wmt_i8042_kbd_irq;
+extern int wmt_i8042_aux_irq;
diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h
new file mode 100644
index 0000000..9077239
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/io.h
+ *
+ * Copyright (C) 2010 Alexey Charkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a) __typesafe_io((a) + 0xf0000000)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h
new file mode 100644
index 0000000..a129fd1
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/irqs.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* This value is just to make the core happy, never used otherwise */
+#define NR_IRQS 128
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
new file mode 100644
index 0000000..175f914
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
new file mode 100644
index 0000000..d6c757e
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/system.h
+ *
+ */
+#include <asm/io.h>
+
+/* PM Software Reset request register */
+#define VT8500_PMSR_VIRT 0xf8130060
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ writel(1, VT8500_PMSR_VIRT);
+}
diff --git a/arch/arm/mach-vt8500/include/mach/timex.h b/arch/arm/mach-vt8500/include/mach/timex.h
new file mode 100644
index 0000000..8487e4c
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MACH_TIMEX_H
+#define MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE (3000000)
+
+#endif /* MACH_TIMEX_H */
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
new file mode 100644
index 0000000..bb9e2d2
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-vt8500/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define UART0_PHYS 0xd8200000
+#include <asm/io.h>
+
+static void putc(const char c)
+{
+ while (readb(UART0_PHYS + 0x1c) & 0x2)
+ /* Tx busy, wait and poll */;
+
+ writeb(c, UART0_PHYS);
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
new file mode 100644
index 0000000..4642290
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xd0000000UL
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
new file mode 100644
index 0000000..ecfee91
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* VT8500 Interrupt Sources */
+
+#define IRQ_JPEGENC 0 /* JPEG Encoder */
+#define IRQ_JPEGDEC 1 /* JPEG Decoder */
+ /* Reserved */
+#define IRQ_PATA 3 /* PATA Controller */
+ /* Reserved */
+#define IRQ_DMA 5 /* DMA Controller */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_GE 8 /* Graphic Engine */
+#define IRQ_GOV 9 /* Graphic Overlay Engine */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+#define IRQ_MPEGTS 11 /* Transport Stream Interface */
+#define IRQ_LCDC 12 /* LCD Controller */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_CIPHER 16 /* Cipher */
+#define IRQ_VPP 17 /* Video Post-Processor */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+ /* Reserved */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_LCDDF 27 /* LCD Data Formatter */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_MS 30 /* MemoryStick Controller */
+#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_I2S 34 /* I2S */
+#define IRQ_PCM 35 /* PCM */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_VPU 40 /* Video Processing Unit */
+#define IRQ_VID 41 /* Video Digital Input Interface */
+#define IRQ_AC97 42 /* AC97 Interface */
+#define IRQ_EHCI 43 /* USB */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */
+#define IRQ_PS2KBD 46 /* PS/2 Keyboard */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_ADC 51 /* ADC */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_DMA0 56 /* DMA Channel 0 */
+#define IRQ_DMA1 57 /* DMA Channel 1 */
+#define IRQ_DMA2 58 /* DMA Channel 2 */
+#define IRQ_DMA3 59 /* DMA Channel 3 */
+#define IRQ_DMA4 60 /* DMA Channel 4 */
+#define IRQ_DMA5 61 /* DMA Channel 5 */
+#define IRQ_DMA6 62 /* DMA Channel 6 */
+#define IRQ_DMA7 63 /* DMA Channel 7 */
+
+#define VT8500_NR_IRQS 64
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
new file mode 100644
index 0000000..29c63ec
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
+#define __ASM_ARM_ARCH_VT8500_REGS_H
+
+/* VT8500 Registers Map */
+
+#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory
+ Controller */
+#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */
+#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */
+# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */
+# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */
+#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */
+#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */
+#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */
+#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */
+#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */
+#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */
+#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */
+#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */
+#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */
+#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */
+#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */
+#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */
+#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */
+#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */
+#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */
+
+#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */
+#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \
+ - VT8500_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
new file mode 100644
index 0000000..7f399c3
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/vt8500fb.h
@@ -0,0 +1,31 @@
+/*
+ * VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+ struct fb_videomode mode;
+ u32 xres_virtual;
+ u32 yres_virtual;
+ u32 bpp;
+ unsigned long video_mem_phys;
+ void *video_mem_virt;
+ unsigned long video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
new file mode 100644
index 0000000..6128627
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* WM8505 Interrupt Sources */
+
+#define IRQ_UHCI 0 /* UHC FS (UHCI?) */
+#define IRQ_EHCI 1 /* UHC HS */
+#define IRQ_UDCDMA 2 /* UDC DMA */
+ /* Reserved */
+#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */
+#define IRQ_UDC 5 /* UDC */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_KEYPAD 8 /* Keypad */
+#define IRQ_DMA 9 /* DMA Controller */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+ /* Reserved */
+ /* Reserved */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_APB 16 /* APB Bridge */
+#define IRQ_DMA0 17 /* DMA Channel 0 */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+#define IRQ_PS2KBD 23 /* PS/2 Keyboard */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_DMA1 27 /* DMA Channel 1 */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_UART5 30 /* UART 5 */
+#define IRQ_UART4 31 /* UART 4 */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_DMA2 34 /* DMA Channel 2 */
+#define IRQ_I2S 35 /* I2S */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_DMA3 40 /* DMA Channel 3 */
+#define IRQ_DMA4 41 /* DMA Channel 4 */
+#define IRQ_AC97 42 /* AC97 Interface */
+ /* Reserved */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_DMA5 45 /* DMA Channel 5 */
+#define IRQ_DMA6 46 /* DMA Channel 6 */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_DMA7 51 /* DMA Channel 7 */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_SIC0 56 /* SIC IRQ0 */
+#define IRQ_SIC1 57 /* SIC IRQ1 */
+#define IRQ_SIC2 58 /* SIC IRQ2 */
+#define IRQ_SIC3 59 /* SIC IRQ3 */
+#define IRQ_SIC4 60 /* SIC IRQ4 */
+#define IRQ_SIC5 61 /* SIC IRQ5 */
+#define IRQ_SIC6 62 /* SIC IRQ6 */
+#define IRQ_SIC7 63 /* SIC IRQ7 */
+ /* Reserved */
+#define IRQ_JPEGDEC 65 /* JPEG Decoder */
+#define IRQ_SAE 66 /* SAE (?) */
+ /* Reserved */
+#define IRQ_VPU 79 /* Video Processing Unit */
+#define IRQ_VPP 80 /* Video Post-Processor */
+#define IRQ_VID 81 /* Video Digital Input Interface */
+#define IRQ_SPU 82 /* SPU (?) */
+#define IRQ_PIP 83 /* PIP Error */
+#define IRQ_GE 84 /* Graphic Engine */
+#define IRQ_GOV 85 /* Graphic Overlay Engine */
+#define IRQ_DVO 86 /* Digital Video Output */
+ /* Reserved */
+#define IRQ_DMA8 92 /* DMA Channel 8 */
+#define IRQ_DMA9 93 /* DMA Channel 9 */
+#define IRQ_DMA10 94 /* DMA Channel 10 */
+#define IRQ_DMA11 95 /* DMA Channel 11 */
+#define IRQ_DMA12 96 /* DMA Channel 12 */
+#define IRQ_DMA13 97 /* DMA Channel 13 */
+#define IRQ_DMA14 98 /* DMA Channel 14 */
+#define IRQ_DMA15 99 /* DMA Channel 15 */
+ /* Reserved */
+#define IRQ_GOVW 111 /* GOVW (?) */
+#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */
+#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */
+#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */
+#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */
+
+#define WM8505_NR_IRQS 116
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
new file mode 100644
index 0000000..df15509
--- /dev/null
+++ b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
+#define __ASM_ARM_ARCH_WM8505_REGS_H
+
+/* WM8505 Registers Map */
+
+#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory
+ Controller */
+#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */
+#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */
+#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */
+# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */
+# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */
+#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */
+#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */
+#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */
+#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */
+#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */
+#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */
+#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */
+#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */
+#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */
+#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */
+#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */
+#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */
+#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */
+
+#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */
+#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \
+ - WM8505_REGS_START_PHYS + 1)
+
+#endif
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
new file mode 100644
index 0000000..5f4ddde
--- /dev/null
+++ b/arch/arm/mach-vt8500/irq.c
@@ -0,0 +1,177 @@
+/*
+ * arch/arm/mach-vt8500/irq.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+
+#include "devices.h"
+
+#define VT8500_IC_DCTR 0x40 /* Destination control
+ register, 64*u8 */
+#define VT8500_INT_ENABLE (1 << 3)
+#define VT8500_TRIGGER_HIGH (0 << 4)
+#define VT8500_TRIGGER_RISING (1 << 4)
+#define VT8500_TRIGGER_FALLING (2 << 4)
+#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
+ | VT8500_TRIGGER_FALLING)
+#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */
+
+static void __iomem *ic_regbase;
+static void __iomem *sic_regbase;
+
+static void vt8500_irq_mask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 edge;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+ if (edge) {
+ void __iomem *stat_reg = base + VT8500_IC_STATUS
+ + (irq < 32 ? 0 : 4);
+ unsigned status = readl(stat_reg);
+
+ status |= (1 << (irq & 0x1f));
+ writel(status, stat_reg);
+ } else {
+ u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+
+ dctr &= ~VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+ }
+}
+
+static void vt8500_irq_unmask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr |= VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+}
+
+static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ void __iomem *base = ic_regbase;
+ unsigned int orig_irq = irq;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr &= ~VT8500_EDGE;
+
+ switch (flow_type) {
+ case IRQF_TRIGGER_LOW:
+ return -EINVAL;
+ case IRQF_TRIGGER_HIGH:
+ dctr |= VT8500_TRIGGER_HIGH;
+ irq_desc[orig_irq].handle_irq = handle_level_irq;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ dctr |= VT8500_TRIGGER_FALLING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ case IRQF_TRIGGER_RISING:
+ dctr |= VT8500_TRIGGER_RISING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ }
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+
+ return 0;
+}
+
+static struct irq_chip vt8500_irq_chip = {
+ .name = "vt8500",
+ .ack = vt8500_irq_mask,
+ .mask = vt8500_irq_mask,
+ .unmask = vt8500_irq_unmask,
+ .set_type = vt8500_irq_set_type,
+};
+
+void __init vt8500_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+
+ if (ic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
+
+void __init wm8505_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+ sic_regbase = ioremap(wmt_sic_base, SZ_64K);
+
+ if (ic_regbase && sic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+ writel((1 << 6), sic_regbase + 0x20);
+ writel(0, sic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ if (i < 64)
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+ else
+ writeb(0x00, sic_regbase + VT8500_IC_DCTR
+ + i - 64);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c
new file mode 100644
index 0000000..8ad825e
--- /dev/null
+++ b/arch/arm/mach-vt8500/pwm.c
@@ -0,0 +1,265 @@
+/*
+ * arch/arm/mach-vt8500/pwm.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#include <asm/div64.h>
+
+#define VT8500_NR_PWMS 4
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+
+ void __iomem *regbase;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+{
+ int loops = msecs_to_loops(10);
+ while ((readb(reg) & bitmask) && --loops)
+ cpu_relax();
+
+ if (unlikely(!loops))
+ pr_warning("Waiting for status bits 0x%x to clear timed out\n",
+ bitmask);
+}
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = 25000000/2; /* wild guess --- need to implement clocks */
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 4096;
+ pv = period_cycles / (prescale + 1) - 1;
+ if (pv > 4095)
+ pv = 4095;
+
+ if (prescale > 1023)
+ return -EINVAL;
+
+ c = (unsigned long long)pv * duty_ns;
+ do_div(c, period_ns);
+ dc = c;
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
+ writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
+ writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
+ writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(5, pwm->regbase + (pwm->pwm_id << 4));
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(0, pwm->regbase + (pwm->pwm_id << 4));
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else {
+ pwm = ERR_PTR(-EBUSY);
+ }
+ } else {
+ pwm = ERR_PTR(-ENOENT);
+ }
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else {
+ pr_warning("PWM device already freed\n");
+ }
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int ret = 0;
+ int i;
+
+ pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
+ if (pwms == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < VT8500_NR_PWMS; i++) {
+ pwms[i].use_count = 0;
+ pwms[i].pwm_id = i;
+ pwms[i].pdev = pdev;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ pwms[0].regbase = ioremap(r->start, resource_size(r));
+ if (pwms[0].regbase == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ for (i = 1; i < VT8500_NR_PWMS; i++)
+ pwms[i].regbase = pwms[0].regbase;
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ __add_pwm(&pwms[i]);
+
+ platform_set_drvdata(pdev, pwms);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, resource_size(r));
+err_free:
+ kfree(pwms);
+ return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int i;
+
+ pwms = platform_get_drvdata(pdev);
+ if (pwms == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ list_del(&pwms[i].node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwms[0].regbase);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ kfree(pwms);
+ return 0;
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "vt8500-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
new file mode 100644
index 0000000..d5376c5
--- /dev/null
+++ b/arch/arm/mach-vt8500/timer.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+#define VT8500_TIMER_HZ 3000000
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static void __init vt8500_timer_init(void)
+{
+ regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
+ if (!regbase)
+ printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
+ clocksource.name);
+
+ clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
+
+ /* copy-pasted from mach-msm; no idea */
+ clockevent.max_delta_ns =
+ clockevent_delta2ns(0xf0000000, &clockevent);
+ clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(wmt_timer_irq, &irq))
+ printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
+ clockevent.name);
+ clockevents_register_device(&clockevent);
+}
+
+struct sys_timer vt8500_timer = {
+ .init = vt8500_timer_init
+};
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
new file mode 100644
index 0000000..e73aadb
--- /dev/null
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-vt8500/wm8505_7in.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_ehci,
+ &vt8500_device_wm8505_fb,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init wm8505_7in_init(void)
+{
+#ifdef CONFIG_FB_WM8505
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ wm8505_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
+ .boot_params = 0x00000100,
+ .reserve = wm8505_reserve_mem,
+ .map_io = wm8505_map_io,
+ .init_irq = wm8505_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = wm8505_7in_init,
+MACHINE_END
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 170c9bb..f2ce38e 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -49,7 +49,13 @@
static inline void cache_sync(void)
{
void __iomem *base = l2x0_base;
+
+#ifdef CONFIG_ARM_ERRATA_753970
+ /* write to an unmmapped register */
+ writel_relaxed(0, base + L2X0_DUMMY_REG);
+#else
writel_relaxed(0, base + L2X0_CACHE_SYNC);
+#endif
cache_wait(base + L2X0_CACHE_SYNC, 1);
}
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index bcf748d..226e3d8 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -493,6 +493,9 @@
.word cpu_arm1020_dcache_clean_area
.word cpu_arm1020_switch_mm
.word cpu_arm1020_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index ab7ec26..86d9c2c 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -474,6 +474,9 @@
.word cpu_arm1020e_dcache_clean_area
.word cpu_arm1020e_switch_mm
.word cpu_arm1020e_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020e_processor_functions, . - arm1020e_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 831c5e5..83d3dd3 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -457,6 +457,9 @@
.word cpu_arm1022_dcache_clean_area
.word cpu_arm1022_switch_mm
.word cpu_arm1022_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1022_processor_functions, . - arm1022_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index e3f7e9a..686043e 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -452,6 +452,9 @@
.word cpu_arm1026_dcache_clean_area
.word cpu_arm1026_switch_mm
.word cpu_arm1026_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1026_processor_functions, . - arm1026_processor_functions
.section .rodata
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 6a7be18..5f79dc4 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -284,6 +284,9 @@
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
.word cpu_arm6_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm6_processor_functions, . - arm6_processor_functions
/*
@@ -301,6 +304,9 @@
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
.word cpu_arm7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index c285395..665266d 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -185,6 +185,9 @@
.word cpu_arm720_dcache_clean_area
.word cpu_arm720_switch_mm
.word cpu_arm720_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm720_processor_functions, . - arm720_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 38b27dc..6f9d12e 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -130,6 +130,9 @@
.word cpu_arm740_dcache_clean_area
.word cpu_arm740_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm740_processor_functions, . - arm740_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 0c9786d..e4c165c 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -70,6 +70,9 @@
.word cpu_arm7tdmi_dcache_clean_area
.word cpu_arm7tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 6109f27..219980e 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -387,6 +387,40 @@
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm920_suspend_size
+.equ cpu_arm920_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm920_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm920_do_suspend)
+
+ENTRY(cpu_arm920_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm920_do_resume)
+#else
+#define cpu_arm920_do_suspend 0
+#define cpu_arm920_do_resume 0
+#endif
+
__CPUINIT
.type __arm920_setup, #function
@@ -432,6 +466,9 @@
.word cpu_arm920_dcache_clean_area
.word cpu_arm920_switch_mm
.word cpu_arm920_set_pte_ext
+ .word cpu_arm920_suspend_size
+ .word cpu_arm920_do_suspend
+ .word cpu_arm920_do_resume
.size arm920_processor_functions, . - arm920_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index bb2f0f4..36154b1 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -436,6 +436,9 @@
.word cpu_arm922_dcache_clean_area
.word cpu_arm922_switch_mm
.word cpu_arm922_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm922_processor_functions, . - arm922_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index c13e01a..89c5e000 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -503,6 +503,9 @@
.word cpu_arm925_dcache_clean_area
.word cpu_arm925_switch_mm
.word cpu_arm925_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm925_processor_functions, . - arm925_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 42eb431..6a4bdb2 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -401,6 +401,40 @@
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm926_suspend_size
+.equ cpu_arm926_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm926_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm926_do_suspend)
+
+ENTRY(cpu_arm926_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm926_do_resume)
+#else
+#define cpu_arm926_do_suspend 0
+#define cpu_arm926_do_resume 0
+#endif
+
__CPUINIT
.type __arm926_setup, #function
@@ -456,6 +490,9 @@
.word cpu_arm926_dcache_clean_area
.word cpu_arm926_switch_mm
.word cpu_arm926_set_pte_ext
+ .word cpu_arm926_suspend_size
+ .word cpu_arm926_do_suspend
+ .word cpu_arm926_do_resume
.size arm926_processor_functions, . - arm926_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 7b11cdb..26aea3f 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -363,6 +363,9 @@
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 1a5bbf0..8063345 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -419,6 +419,9 @@
.word cpu_arm946_dcache_clean_area
.word cpu_arm946_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm946_processor_functions, . - arm946_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index db67e31..7b7ebd4 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -70,6 +70,9 @@
.word cpu_arm9tdmi_dcache_clean_area
.word cpu_arm9tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 7c9ad62..fc2a4ae 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -195,6 +195,9 @@
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index b4597ed..d3883ee 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -554,6 +554,9 @@
.word cpu_feroceon_dcache_clean_area
.word cpu_feroceon_switch_mm
.word cpu_feroceon_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size feroceon_processor_functions, . - feroceon_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 4458ee6..9d4f2ae 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -388,6 +388,9 @@
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 5aa8d59..46f09ed 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -203,6 +203,9 @@
.word cpu_sa110_dcache_clean_area
.word cpu_sa110_switch_mm
.word cpu_sa110_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size sa110_processor_functions, . - sa110_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 2ac4e6f..74483d1 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -169,6 +169,42 @@
#endif
mov pc, lr
+.globl cpu_sa1100_suspend_size
+.equ cpu_sa1100_suspend_size, 4*4
+#ifdef CONFIG_PM
+ENTRY(cpu_sa1100_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c3, c0, 0 @ domain ID
+ mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r7} @ store cp regs
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_sa1100_do_suspend)
+
+ENTRY(cpu_sa1100_do_resume)
+ ldmia r0, {r4 - r7} @ load cp regs
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+
+ mcr p15, 0, r4, c3, c0, 0 @ domain ID
+ mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mov r0, r7 @ control register
+ mov r2, r5, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_sa1100_do_resume)
+#else
+#define cpu_sa1100_do_suspend 0
+#define cpu_sa1100_do_resume 0
+#endif
+
__CPUINIT
.type __sa1100_setup, #function
@@ -218,6 +254,9 @@
.word cpu_sa1100_dcache_clean_area
.word cpu_sa1100_switch_mm
.word cpu_sa1100_set_pte_ext
+ .word cpu_sa1100_suspend_size
+ .word cpu_sa1100_do_suspend
+ .word cpu_sa1100_do_resume
.size sa1100_processor_functions, . - sa1100_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 59a7e1f..832b6bd 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -121,6 +121,53 @@
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
+.globl cpu_v6_suspend_size
+.equ cpu_v6_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v6_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r11, c1, c0, 0 @ control register
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4- r11, pc}
+ENDPROC(cpu_v6_do_suspend)
+
+ENTRY(cpu_v6_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, ip, c7, c5, 4 @ ISB
+ mov r0, r11 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v6_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v6_do_suspend 0
+#define cpu_v6_do_resume 0
+#endif
.type cpu_v6_name, #object
@@ -206,6 +253,9 @@
.word cpu_v6_dcache_clean_area
.word cpu_v6_switch_mm
.word cpu_v6_set_pte_ext
+ .word cpu_v6_suspend_size
+ .word cpu_v6_do_suspend
+ .word cpu_v6_do_resume
.size v6_processor_functions, . - v6_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0c1172b..262fa88 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,10 +108,16 @@
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
#endif
@@ -171,6 +177,87 @@
.ascii "ARMv7 Processor"
.align
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
+.globl cpu_v7_suspend_size
+.equ cpu_v7_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v7_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ TTB 0
+ mrc p15, 0, r8, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_v7_do_suspend)
+
+ENTRY(cpu_v7_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ ldr r4, =PRRR @ PRRR
+ ldr r5, =NMRR @ NMRR
+ mcr p15, 0, r4, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r5, c10, c2, 1 @ write NMRR
+ isb
+ mov r0, r9 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v7_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v7_do_suspend 0
+#define cpu_v7_do_resume 0
+#endif
+
__CPUINIT
/*
@@ -264,6 +351,12 @@
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
+#ifdef CONFIG_ARM_ERRATA_751472
+ cmp r6, #0x30 @ present prior to r3p0
+ mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orrlt r10, r10, #1 << 11 @ set bit #11
+ mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
@@ -276,36 +369,8 @@
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
- ldr r5, =0xff0a81a8 @ PRRR
- ldr r6, =0x40e040e0 @ NMRR
+ ldr r5, =PRRR @ PRRR
+ ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
@@ -351,6 +416,9 @@
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size v7_processor_functions, . - v7_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index ec26355..63d8b20 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -413,9 +413,52 @@
mov pc, lr
.ltorg
-
.align
+.globl cpu_xsc3_suspend_size
+.equ cpu_xsc3_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_xsc3_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ ldmia sp!, {r4 - r10, pc}
+ENDPROC(cpu_xsc3_do_suspend)
+
+ENTRY(cpu_xsc3_do_resume)
+ ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
+ mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+
+ @ temporarily map resume_turn_on_mmu into the page table,
+ @ otherwise prefetch abort occurs after MMU is turned on
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =0x542e @ section flags
+ b cpu_resume_mmu
+ENDPROC(cpu_xsc3_do_resume)
+#else
+#define cpu_xsc3_do_suspend 0
+#define cpu_xsc3_do_resume 0
+#endif
+
__CPUINIT
.type __xsc3_setup, #function
@@ -476,6 +519,9 @@
.word cpu_xsc3_dcache_clean_area
.word cpu_xsc3_switch_mm
.word cpu_xsc3_set_pte_ext
+ .word cpu_xsc3_suspend_size
+ .word cpu_xsc3_do_suspend
+ .word cpu_xsc3_do_resume
.size xsc3_processor_functions, . - xsc3_processor_functions
.section ".rodata"
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 5a37c5e..086038c 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -513,11 +513,49 @@
xscale_set_pte_ext_epilogue
mov pc, lr
-
.ltorg
-
.align
+.globl cpu_xscale_suspend_size
+.equ cpu_xscale_suspend_size, 4 * 7
+#ifdef CONFIG_PM
+ENTRY(cpu_xscale_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r4 - r10} @ store cp regs
+ ldmfd sp!, {r4 - r10, pc}
+ENDPROC(cpu_xscale_do_suspend)
+
+ENTRY(cpu_xscale_do_resume)
+ ldmia r0, {r4 - r10} @ load cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_xscale_do_resume)
+#else
+#define cpu_xscale_do_suspend 0
+#define cpu_xscale_do_resume 0
+#endif
+
__CPUINIT
.type __xscale_setup, #function
@@ -565,6 +603,9 @@
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
.word cpu_xscale_set_pte_ext
+ .word cpu_xscale_suspend_size
+ .word cpu_xscale_do_suspend
+ .word cpu_xscale_do_resume
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 9967d5e..f500fc3 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -12,7 +12,19 @@
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
-extern void * omap_sram_push(void * start, unsigned long size);
+#include <asm/fncpy.h>
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
+
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 459b319..49d3208 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -322,15 +322,18 @@
struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
{
- struct omap_mbox *mbox;
- int ret;
+ struct omap_mbox *_mbox, *mbox = NULL;
+ int i, ret;
if (!mboxes)
return ERR_PTR(-EINVAL);
- for (mbox = *mboxes; mbox; mbox++)
- if (!strcmp(mbox->name, name))
+ for (i = 0; (_mbox = mboxes[i]); i++) {
+ if (!strcmp(_mbox->name, name)) {
+ mbox = _mbox;
break;
+ }
+ }
if (!mbox)
return ERR_PTR(-ENOENT);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e26e504..68fcc7d 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -242,7 +242,14 @@
omap_sram_size - SRAM_BOOTLOADER_SZ);
}
-void * omap_sram_push(void * start, unsigned long size)
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
printk(KERN_ERR "Not enough space in SRAM\n");
@@ -250,10 +257,7 @@
}
omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
- memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)omap_sram_ceil,
- (unsigned long)(omap_sram_ceil + size));
+ omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
return (void *)omap_sram_ceil;
}
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e..fd7032f 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c13, c0, 0 @ PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ translation table base address
- mrc p15, 0, r7, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- @@ write our state back to RAM
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ jump to final code to send system to sleep
ldr r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@
.ltorg
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -100,10 +76,6 @@
/* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a73428..afaf87f 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
static struct resource s5p_uart0_resource[] = {
[0] = {
.start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART,
+ .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -51,7 +51,7 @@
static struct resource s5p_uart1_resource[] = {
[0] = {
.start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART,
+ .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -74,7 +74,7 @@
static struct resource s5p_uart2_resource[] = {
[0] = {
.start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART,
+ .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -98,7 +98,7 @@
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART,
+ .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -123,7 +123,7 @@
#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
[0] = {
.start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART,
+ .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -148,7 +148,7 @@
#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
[0] = {
.start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART,
+ .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 236ef84..3e4bd81 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -58,4 +58,3 @@
s3c_device_ts.dev.platform_data = npd;
}
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
index 3776cd9..5928105 100644
--- a/arch/arm/plat-samsung/dev-uart.c
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -15,6 +15,8 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <plat/devs.h>
+
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 30518cc..937cc2a 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -52,13 +52,11 @@
/* from sleep.S */
-extern int s3c_cpu_save(unsigned long *saveblk);
+extern int s3c_cpu_save(unsigned long *saveblk, long);
extern void s3c_cpu_resume(void);
extern void s3c2410_cpu_suspend(void);
-extern unsigned long s3c_sleep_save_phys;
-
/* sleep save info */
/**
@@ -181,13 +179,5 @@
*/
extern void s3c_pm_save_gpios(void);
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 02d531f..d5b58d3 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -241,8 +241,6 @@
static int s3c_pm_enter(suspend_state_t state)
{
- static unsigned long regs_save[16];
-
/* ensure the debug is initialised (if enabled) */
s3c_pm_debug_init();
@@ -266,12 +264,6 @@
return -EINVAL;
}
- /* store the physical address of the register recovery block */
-
- s3c_sleep_save_phys = virt_to_phys(regs_save);
-
- S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
@@ -305,7 +297,7 @@
* we resume as it saves its own register state and restores it
* during the resume. */
- s3c_cpu_save(regs_save);
+ s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
/* restore the cpu state using the kernel's cpu init code. */
@@ -336,12 +328,6 @@
return 0;
}
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
- flush_cache_all();
-}
-
static int s3c_pm_prepare(void)
{
/* prepare check area if configured */
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index eb89540..b4f340b 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o padmux.o time.o
+obj-y := clock.o time.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
index ee4f90e..bdbd7ec 100644
--- a/arch/arm/plat-spear/clock.c
+++ b/arch/arm/plat-spear/clock.c
@@ -12,18 +12,25 @@
*/
#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
static DEFINE_SPINLOCK(clocks_lock);
static LIST_HEAD(root_clks);
+#ifdef CONFIG_DEBUG_FS
+static LIST_HEAD(clocks);
+#endif
-static void propagate_rate(struct list_head *);
+static void propagate_rate(struct clk *, int on_init);
+#ifdef CONFIG_DEBUG_FS
+static int clk_debugfs_reparent(struct clk *);
+#endif
static int generic_clk_enable(struct clk *clk)
{
@@ -65,6 +72,104 @@
.disable = generic_clk_disable,
};
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+ unsigned int val, i;
+ struct pclk_info *info = NULL;
+
+ val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+ & clk->pclk_sel->pclk_sel_mask;
+
+ for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+ if (clk->pclk_sel->pclk_info[i].pclk_val == val)
+ info = &clk->pclk_sel->pclk_info[i];
+ }
+
+ return info;
+}
+
+/*
+ * Set Update pclk, and pclk_info of clk and add clock sibling node to current
+ * parents children list
+ */
+static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_del(&clk->sibling);
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+
+ clk->pclk = pclk_info->pclk;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+#ifdef CONFIG_DEBUG_FS
+ clk_debugfs_reparent(clk);
+#endif
+}
+
+static void do_clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ if (!clk->usage_count) {
+ WARN_ON(1);
+ return;
+ }
+
+ clk->usage_count--;
+
+ if (clk->usage_count == 0) {
+ /*
+ * Surely, there are no active childrens or direct users
+ * of this clock
+ */
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+ }
+}
+
+static int do_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!clk)
+ return -EFAULT;
+
+ if (clk->usage_count == 0) {
+ if (clk->pclk) {
+ ret = do_clk_enable(clk->pclk);
+ if (ret)
+ goto err;
+ }
+ if (clk->ops && clk->ops->enable) {
+ ret = clk->ops->enable(clk);
+ if (ret) {
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+ goto err;
+ }
+ }
+ /*
+ * Since the clock is going to be used for the first
+ * time please reclac
+ */
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ if (ret)
+ goto err;
+ }
+ }
+ clk->usage_count++;
+err:
+ return ret;
+}
+
/*
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
@@ -78,17 +183,9 @@
unsigned long flags;
int ret = 0;
- if (!clk || IS_ERR(clk))
- return -EFAULT;
-
spin_lock_irqsave(&clocks_lock, flags);
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->enable)
- ret = clk->ops->enable(clk);
- }
- clk->usage_count++;
+ ret = do_clk_enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
-
return ret;
}
EXPORT_SYMBOL(clk_enable);
@@ -109,17 +206,8 @@
{
unsigned long flags;
- if (!clk || IS_ERR(clk))
- return;
-
- WARN_ON(clk->usage_count == 0);
-
spin_lock_irqsave(&clocks_lock, flags);
- clk->usage_count--;
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
+ do_clk_disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -153,15 +241,14 @@
int i, found = 0, val = 0;
unsigned long flags;
- if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+ if (!clk || !parent)
return -EFAULT;
- if (clk->usage_count)
- return -EBUSY;
- if (!clk->pclk_sel)
- return -EPERM;
if (clk->pclk == parent)
return 0;
+ if (!clk->pclk_sel)
+ return -EPERM;
+ /* check if requested parent is in clk parent list */
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk == parent) {
found = 1;
@@ -176,25 +263,58 @@
/* reflect parent change in hardware */
val = readl(clk->pclk_sel->pclk_sel_reg);
val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+ val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
writel(val, clk->pclk_sel->pclk_sel_reg);
spin_unlock_irqrestore(&clocks_lock, flags);
/* reflect parent change in software */
- clk->recalc(clk);
- propagate_rate(&clk->children);
+ clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
+
+ propagate_rate(clk, 0);
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (!clk || !rate)
+ return -EFAULT;
+
+ if (clk->set_rate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->set_rate(clk, rate);
+ if (!ret)
+ /* if successful -> propagate */
+ propagate_rate(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ } else if (clk->pclk) {
+ u32 mult = clk->div_factor ? clk->div_factor : 1;
+ ret = clk_set_rate(clk->pclk, mult * rate);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
/* registers clock in platform clock framework */
void clk_register(struct clk_lookup *cl)
{
- struct clk *clk = cl->clk;
+ struct clk *clk;
unsigned long flags;
- if (!clk || IS_ERR(clk))
+ if (!cl || !cl->clk)
return;
+ clk = cl->clk;
spin_lock_irqsave(&clocks_lock, flags);
@@ -207,71 +327,173 @@
/* root clock don't have any parents */
if (!clk->pclk && !clk->pclk_sel) {
list_add(&clk->sibling, &root_clks);
- /* add clocks with only one parent to parent's children list */
} else if (clk->pclk && !clk->pclk_sel) {
+ /* add clocks with only one parent to parent's children list */
list_add(&clk->sibling, &clk->pclk->children);
} else {
- /* add clocks with > 1 parent to 1st parent's children list */
- list_add(&clk->sibling,
- &clk->pclk_sel->pclk_info[0].pclk->children);
+ /* clocks with more than one parent */
+ struct pclk_info *pclk_info;
+
+ pclk_info = pclk_info_get(clk);
+ if (!pclk_info) {
+ pr_err("CLKDEV: invalid pclk info of clk with"
+ " %s dev_id and %s con_id\n",
+ cl->dev_id, cl->con_id);
+ } else {
+ clk->pclk = pclk_info->pclk;
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+ }
}
+
spin_unlock_irqrestore(&clocks_lock, flags);
+ /* debugfs specific */
+#ifdef CONFIG_DEBUG_FS
+ list_add(&clk->node, &clocks);
+ clk->cl = cl;
+#endif
+
/* add clock to arm clockdev framework */
clkdev_add(cl);
}
/**
- * propagate_rate - recalculate and propagate all clocks in list head
+ * propagate_rate - recalculate and propagate all clocks to children
+ * @pclk: parent clock required to be propogated
+ * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
*
- * Recalculates all root clocks in list head, which if the clock's .recalc is
- * set correctly, should also propagate their rates.
+ * Recalculates all children clocks
*/
-static void propagate_rate(struct list_head *lhead)
+void propagate_rate(struct clk *pclk, int on_init)
{
- struct clk *clkp, *_temp;
+ struct clk *clk, *_temp;
+ int ret = 0;
- list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
- if (clkp->recalc)
- clkp->recalc(clkp);
- propagate_rate(&clkp->children);
+ list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default rate.
+ */
+ if (ret && clk->set_rate)
+ clk->set_rate(clk, 0);
+ }
+ propagate_rate(clk, on_init);
+
+ if (!on_init)
+ continue;
+
+ /* Enable clks enabled on init, in software view */
+ if (clk->flags & ENABLED_ON_INIT)
+ do_clk_enable(clk);
}
}
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
+/**
+ * round_rate_index - return closest programmable rate index in rate_config tbl
+ * @clk: ptr to clock structure
+ * @drate: desired rate
+ * @rate: final rate will be returned in this variable only.
+ *
+ * Finds index in rate_config for highest clk rate which is less than
+ * requested rate. If there is no clk rate lesser than requested rate then
+ * -EINVAL is returned. This routine assumes that rate_config is written
+ * in incrementing order of clk rates.
+ * If drate passed is zero then default rate is programmed.
+ */
+static int
+round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
{
- unsigned int mask, i;
- unsigned long flags;
- struct pclk_info *info = NULL;
+ unsigned long tmp = 0, prev_rate = 0;
+ int index;
- spin_lock_irqsave(&clocks_lock, flags);
- mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
+ if (!clk->calc_rate)
+ return -EFAULT;
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
- info = &clk->pclk_sel->pclk_info[i];
+ if (!drate)
+ return -EINVAL;
+
+ /*
+ * This loops ends on two conditions:
+ * - as soon as clk is found with rate greater than requested rate.
+ * - if all clks in rate_config are smaller than requested rate.
+ */
+ for (index = 0; index < clk->rate_config.count; index++) {
+ prev_rate = tmp;
+ tmp = clk->calc_rate(clk, index);
+ if (drate < tmp) {
+ index--;
+ break;
+ }
}
- spin_unlock_irqrestore(&clocks_lock, flags);
+ /* return if can't find suitable clock */
+ if (index < 0) {
+ index = -EINVAL;
+ *rate = 0;
+ } else if (index == clk->rate_config.count) {
+ /* program with highest clk rate possible */
+ index = clk->rate_config.count - 1;
+ *rate = tmp;
+ } else
+ *rate = prev_rate;
- return info;
+ return index;
}
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
+ */
+long clk_round_rate(struct clk *clk, unsigned long drate)
+{
+ long rate = 0;
+ int index;
+
+ /*
+ * propagate call to parent who supports calc_rate. Similar approach is
+ * used in clk_set_rate.
+ */
+ if (!clk->calc_rate) {
+ u32 mult;
+ if (!clk->pclk)
+ return clk->rate;
+
+ mult = clk->div_factor ? clk->div_factor : 1;
+ return clk_round_rate(clk->pclk, mult * drate) / mult;
+ }
+
+ index = round_rate_index(clk, drate, &rate);
+ if (index >= 0)
+ return rate;
+ else
+ return index;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*All below functions are called with lock held */
+
/*
- * Set pclk as cclk's parent and add clock sibling node to current parents
- * children list
+ * Calculates pll clk rate for specific value of mode, m, n and p
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
-static void change_parent(struct clk *cclk, struct clk *pclk)
+unsigned long pll_calc_rate(struct clk *clk, int index)
{
- unsigned long flags;
+ unsigned long rate = clk->pclk->rate;
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ unsigned int mode;
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&cclk->sibling);
- list_add(&cclk->sibling, &pclk->children);
-
- cclk->pclk = pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ mode = tbls[index].mode ? 256 : 1;
+ return (((2 * rate / 10000) * tbls[index].m) /
+ (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
}
/*
@@ -283,47 +505,146 @@
* In Dithered mode
* rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
-void pll1_clk_recalc(struct clk *clk)
+int pll_clk_recalc(struct clk *clk)
{
struct pll_clk_config *config = clk->private_data;
unsigned int num = 2, den = 0, val, mode = 0;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
- PLL_MODE_MASK;
+ mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
+ config->masks->mode_mask;
val = readl(config->cfg_reg);
/* calculate denominator */
- den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+ den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
den = 1 << den;
- den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+ den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
/* calculate numerator & denominator */
if (!mode) {
/* Normal mode */
- num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ num *= (val >> config->masks->norm_fdbk_m_shift) &
+ config->masks->norm_fdbk_m_mask;
} else {
/* Dithered mode */
- num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ num *= (val >> config->masks->dith_fdbk_m_shift) &
+ config->masks->dith_fdbk_m_mask;
den *= 256;
}
+ if (!den)
+ return -EINVAL;
+
clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/*
+ * Configures new clock rate of pll
+ */
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ struct pll_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->mode_reg) &
+ ~(config->masks->mode_mask << config->masks->mode_shift);
+ val |= (tbls[i].mode & config->masks->mode_mask) <<
+ config->masks->mode_shift;
+ writel(val, config->mode_reg);
+
+ val = readl(config->cfg_reg) &
+ ~(config->masks->div_p_mask << config->masks->div_p_shift);
+ val |= (tbls[i].p & config->masks->div_p_mask) <<
+ config->masks->div_p_shift;
+ val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
+ val |= (tbls[i].n & config->masks->div_n_mask) <<
+ config->masks->div_n_shift;
+ val &= ~(config->masks->dith_fdbk_m_mask <<
+ config->masks->dith_fdbk_m_shift);
+ if (tbls[i].mode)
+ val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
+ config->masks->dith_fdbk_m_shift;
+ else
+ val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
+ config->masks->norm_fdbk_m_shift;
+
+ writel(val, config->cfg_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates ahb, apb clk rate for specific value of div
+ */
+unsigned long bus_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / (tbls[index].div + 1);
}
/* calculates current programmed rate of ahb or apb bus */
-void bus_clk_recalc(struct clk *clk)
+int bus_clk_recalc(struct clk *clk)
{
struct bus_clk_config *config = clk->private_data;
unsigned int div;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+ div = ((readl(config->reg) >> config->masks->shift) &
+ config->masks->mask) + 1;
+
+ if (!div)
+ return -EINVAL;
+
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of AHB OR APB bus */
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+ struct bus_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->reg) &
+ ~(config->masks->mask << config->masks->shift);
+ val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
+ writel(val, config->reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+unsigned long aux_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ u8 eq = tbls[index].eq ? 1 : 2;
+
+ return (((rate/10000) * tbls[index].xscale) /
+ (tbls[index].yscale * eq)) * 10000;
}
/*
@@ -336,44 +657,76 @@
*
* Selection of eqn 1 or 2 is programmed in register
*/
-void aux_clk_recalc(struct clk *clk)
+int aux_clk_recalc(struct clk *clk)
{
struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
unsigned int num = 1, den = 1, val, eqn;
- unsigned long flags;
- /* get current programmed parent */
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
+ val = readl(config->synth_reg);
- change_parent(clk, pclk_info->pclk);
+ eqn = (val >> config->masks->eq_sel_shift) &
+ config->masks->eq_sel_mask;
+ if (eqn == config->masks->eq1_mask)
+ den *= 2;
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
+ /* calculate numerator */
+ num = (val >> config->masks->xscale_sel_shift) &
+ config->masks->xscale_sel_mask;
- eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
- if (eqn == AUX_EQ1_SEL)
- den *= 2;
+ /* calculate denominator */
+ den *= (val >> config->masks->yscale_sel_shift) &
+ config->masks->yscale_sel_mask;
- /* calculate numerator */
- num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+ if (!den)
+ return -EINVAL;
- /* calculate denominator */
- den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
- val = (((clk->pclk->rate/10000) * num) / den) * 10000;
- } else
- val = clk->pclk->rate;
+ clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+ return 0;
+}
- clk->rate = val;
- spin_unlock_irqrestore(&clocks_lock, flags);
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ struct aux_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) &
+ ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
+ val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
+ config->masks->eq_sel_shift;
+ val &= ~(config->masks->xscale_sel_mask <<
+ config->masks->xscale_sel_shift);
+ val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
+ config->masks->xscale_sel_shift;
+ val &= ~(config->masks->yscale_sel_mask <<
+ config->masks->yscale_sel_shift);
+ val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
+ config->masks->yscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates gpt clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+unsigned long gpt_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / ((1 << (tbls[index].nscale + 1)) *
+ (tbls[index].mscale + 1));
}
/*
@@ -381,46 +734,142 @@
* Fout from synthesizer can be given from below equations:
* Fout= Fin/((2 ^ (N+1)) * (M+1))
*/
-void gpt_clk_recalc(struct clk *clk)
+int gpt_clk_recalc(struct clk *clk)
{
- struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
+ struct gpt_clk_config *config = clk->private_data;
unsigned int div = 1, val;
- unsigned long flags;
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
+ val = readl(config->synth_reg);
+ div += (val >> config->masks->mscale_sel_shift) &
+ config->masks->mscale_sel_mask;
+ div *= 1 << (((val >> config->masks->nscale_sel_shift) &
+ config->masks->nscale_sel_mask) + 1);
- change_parent(clk, pclk_info->pclk);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
- div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
- div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
- }
+ if (!div)
+ return -EINVAL;
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+ struct gpt_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
+ config->masks->mscale_sel_shift);
+ val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
+ config->masks->mscale_sel_shift;
+ val &= ~(config->masks->nscale_sel_mask <<
+ config->masks->nscale_sel_shift);
+ val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
+ config->masks->nscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
}
/*
- * Used for clocks that always have same value as the parent clock divided by a
+ * Calculates clcd clk rate for different values of div
+ *
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+unsigned long clcd_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+
+ rate /= 1000;
+ rate <<= 12;
+ rate /= (2 * tbls[index].div);
+ rate >>= 12;
+ rate *= 1000;
+
+ return rate;
+}
+
+/*
+ * calculates current programmed rate of clcd synthesizer
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+int clcd_clk_recalc(struct clk *clk)
+{
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned int div = 1;
+ unsigned long prate;
+ unsigned int val;
+
+ val = readl(config->synth_reg);
+ div = (val >> config->masks->div_factor_shift) &
+ config->masks->div_factor_mask;
+
+ if (!div)
+ return -EINVAL;
+
+ prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
+
+ clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
+ clk->rate *= 1000;
+ return 0;
+}
+
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
+ config->masks->div_factor_shift);
+ val |= (tbls[i].div & config->masks->div_factor_mask) <<
+ config->masks->div_factor_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Used for clocks that always have value as the parent clock divided by a
* fixed divisor
*/
-void follow_parent(struct clk *clk)
+int follow_parent(struct clk *clk)
{
- unsigned long flags;
+ unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
- spin_lock_irqsave(&clocks_lock, flags);
- clk->rate = clk->pclk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ clk->rate = clk->pclk->rate/div_factor;
+ return 0;
}
/**
@@ -431,5 +880,124 @@
*/
void recalc_root_clocks(void)
{
- propagate_rate(&root_clks);
+ struct clk *pclk;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_for_each_entry(pclk, &root_clks, sibling) {
+ if (pclk->recalc) {
+ ret = pclk->recalc(pclk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default clock.
+ */
+ if (ret && pclk->set_rate)
+ pclk->set_rate(pclk, 0);
+ }
+ propagate_rate(pclk, 1);
+ /* Enable clks enabled on init, in software view */
+ if (pclk->flags & ENABLED_ON_INIT)
+ do_clk_enable(pclk);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d, *child;
+ struct clk *pa = c->pclk;
+ char s[255];
+ char *p = s;
+
+ if (c) {
+ if (c->cl->con_id)
+ p += sprintf(p, "%s", c->cl->con_id);
+ if (c->cl->dev_id)
+ p += sprintf(p, "%s", c->cl->dev_id);
+ }
+ d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
+ (u32 *)&c->usage_count);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ d = c->dent;
+ list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->pclk;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+static int clk_debugfs_reparent(struct clk *c)
+{
+ debugfs_remove(c->dent);
+ return clk_debugfs_register_one(c);
+}
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 2572260..2ae6606 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -21,6 +21,7 @@
/* clk structure flags */
#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
+#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
/**
* struct clkops - clock operations
@@ -35,13 +36,11 @@
/**
* struct pclk_info - parents info
* @pclk: pointer to parent clk
- * @pclk_mask: value to be written for selecting this parent
- * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ * @pclk_val: value to be written for selecting this parent
*/
struct pclk_info {
struct clk *pclk;
- u8 pclk_mask;
- u8 scalable;
+ u8 pclk_val;
};
/**
@@ -54,11 +53,23 @@
struct pclk_sel {
struct pclk_info *pclk_info;
u8 pclk_count;
- unsigned int *pclk_sel_reg;
+ void __iomem *pclk_sel_reg;
unsigned int pclk_sel_mask;
};
/**
+ * struct rate_config - clk rate configurations
+ * @tbls: array of device specific clk rate tables, in ascending order of rates
+ * @count: size of tbls array
+ * @default_index: default setting when originally disabled
+ */
+struct rate_config {
+ void *tbls;
+ u8 count;
+ u8 default_index;
+};
+
+/**
* struct clk - clock structure
* @usage_count: num of users who enabled this clock
* @flags: flags for clock properties
@@ -67,21 +78,32 @@
* @en_reg_bit: clk enable/disable bit
* @ops: clk enable/disable ops - generic_clkops selected if NULL
* @recalc: pointer to clock rate recalculate function
+ * @set_rate: pointer to clock set rate function
+ * @calc_rate: pointer to clock get rate function for index
+ * @rate_config: rate configuration information, used by set_rate
+ * @div_factor: division factor to parent clock.
* @pclk: current parent clk
* @pclk_sel: pointer to parent selection structure
* @pclk_sel_shift: register shift for selecting parent of this clock
* @children: list for childrens or this clock
* @sibling: node for list of clocks having same parents
* @private_data: clock specific private data
+ * @node: list to maintain clocks linearly
+ * @cl: clocklook up assoicated with this clock
+ * @dent: object for debugfs
*/
struct clk {
unsigned int usage_count;
unsigned int flags;
unsigned long rate;
- unsigned int *en_reg;
+ void __iomem *en_reg;
u8 en_reg_bit;
const struct clkops *ops;
- void (*recalc) (struct clk *);
+ int (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *, unsigned long rate);
+ unsigned long (*calc_rate)(struct clk *, int index);
+ struct rate_config rate_config;
+ unsigned int div_factor;
struct clk *pclk;
struct pclk_sel *pclk_sel;
@@ -90,37 +112,137 @@
struct list_head children;
struct list_head sibling;
void *private_data;
+#ifdef CONFIG_DEBUG_FS
+ struct list_head node;
+ struct clk_lookup *cl;
+ struct dentry *dent;
+#endif
};
/* pll configuration structure */
+struct pll_clk_masks {
+ u32 mode_mask;
+ u32 mode_shift;
+
+ u32 norm_fdbk_m_mask;
+ u32 norm_fdbk_m_shift;
+ u32 dith_fdbk_m_mask;
+ u32 dith_fdbk_m_shift;
+ u32 div_p_mask;
+ u32 div_p_shift;
+ u32 div_n_mask;
+ u32 div_n_shift;
+};
+
struct pll_clk_config {
- unsigned int *mode_reg;
- unsigned int *cfg_reg;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_clk_masks *masks;
+};
+
+/* pll clk rate config structure */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
};
/* ahb and apb bus configuration structure */
-struct bus_clk_config {
- unsigned int *reg;
- unsigned int mask;
- unsigned int shift;
+struct bus_clk_masks {
+ u32 mask;
+ u32 shift;
};
-/*
- * Aux clk configuration structure: applicable to GPT, UART and FIRDA
- */
+struct bus_clk_config {
+ void __iomem *reg;
+ struct bus_clk_masks *masks;
+};
+
+/* ahb and apb clk bus rate config structure */
+struct bus_rate_tbl {
+ u8 div;
+};
+
+/* Aux clk configuration structure: applicable to UART and FIRDA */
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
+};
+
struct aux_clk_config {
- unsigned int *synth_reg;
+ void __iomem *synth_reg;
+ struct aux_clk_masks *masks;
+};
+
+/* aux clk rate config structure */
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+/* GPT clk configuration structure */
+struct gpt_clk_masks {
+ u32 mscale_sel_mask;
+ u32 mscale_sel_shift;
+ u32 nscale_sel_mask;
+ u32 nscale_sel_shift;
+};
+
+struct gpt_clk_config {
+ void __iomem *synth_reg;
+ struct gpt_clk_masks *masks;
+};
+
+/* gpt clk rate config structure */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+/* clcd clk configuration structure */
+struct clcd_synth_masks {
+ u32 div_factor_mask;
+ u32 div_factor_shift;
+};
+
+struct clcd_clk_config {
+ void __iomem *synth_reg;
+ struct clcd_synth_masks *masks;
+};
+
+/* clcd clk rate config structure */
+struct clcd_rate_tbl {
+ u16 div;
};
/* platform specific clock functions */
void clk_register(struct clk_lookup *cl);
void recalc_root_clocks(void);
-/* clock recalc functions */
-void follow_parent(struct clk *clk);
-void pll1_clk_recalc(struct clk *clk);
-void bus_clk_recalc(struct clk *clk);
-void gpt_clk_recalc(struct clk *clk);
-void aux_clk_recalc(struct clk *clk);
+/* clock recalc & set rate functions */
+int follow_parent(struct clk *clk);
+unsigned long pll_calc_rate(struct clk *clk, int index);
+int pll_clk_recalc(struct clk *clk);
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long bus_calc_rate(struct clk *clk, int index);
+int bus_clk_recalc(struct clk *clk);
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long gpt_calc_rate(struct clk *clk, int index);
+int gpt_clk_recalc(struct clk *clk);
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long aux_calc_rate(struct clk *clk, int index);
+int aux_clk_recalc(struct clk *clk);
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long clcd_calc_rate(struct clk *clk, int index);
+int clcd_clk_recalc(struct clk *clk);
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index e91270e..8501bbf 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
.macro addruart, rp, rv
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
new file mode 100644
index 0000000..66d6772
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/hardware.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-spear/include/plat/hardware.h
+ *
+ * Hardware definitions for SPEAr
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_HARDWARE_H
+#define __PLAT_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem __force *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
+#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
index 55a4e40..a235fa0 100644
--- a/arch/arm/plat-spear/include/plat/system.h
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -14,9 +14,9 @@
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
-#include <asm/hardware/sp810.h>
#include <linux/io.h>
-#include <mach/spear.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 99ba678..1bf8452 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
@@ -24,10 +24,10 @@
{
void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
- while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+ while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
barrier();
- writel(c, base + UART01x_DR);
+ writel_relaxed(c, base + UART01x_DR);
}
static inline void flush(void)
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
index 09e9372..8c8b24d 100644
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -14,6 +14,6 @@
#ifndef __PLAT_VMALLOC_H
#define __PLAT_VMALLOC_H
-#define VMALLOC_END 0xF0000000
+#define VMALLOC_END 0xF0000000UL
#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 839c88d..dbb6e4f 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-spear/time.c
*
- * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2010 ST Microelectronics
* Shiraz Hashim<shiraz.hashim@st.com>
*
* This file is licensed under the terms of the GNU General Public
@@ -20,10 +20,9 @@
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <mach/generic.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -211,7 +210,7 @@
void __init spear_setup_timer(void)
{
- struct clk *pll3_clk;
+ int ret;
if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
pr_err("%s:cannot get IO addr\n", __func__);
@@ -230,26 +229,21 @@
goto err_iomap;
}
- pll3_clk = clk_get(NULL, "pll3_48m_clk");
- if (!pll3_clk) {
- pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
- goto err_iomap;
+ ret = clk_enable(gpt_clk);
+ if (ret < 0) {
+ pr_err("%s:couldn't enable gpt clock\n", __func__);
+ goto err_clk;
}
- clk_set_parent(gpt_clk, pll3_clk);
-
spear_clockevent_init();
spear_clocksource_init();
return;
+err_clk:
+ clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
-
err_mem:
release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
}
-
-struct sys_timer spear_sys_timer = {
- .init = spear_setup_timer,
-};
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 250f4d4..06a5e67 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -13,6 +13,8 @@
.align 2
ENTRY(_outsl)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -20,10 +22,12 @@
LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
.Llong_loop_s: R0 = [P1++];
.Llong_loop_e: [P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsl)
ENTRY(_outsw)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -31,10 +35,12 @@
LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
.Lword_loop_s: R0 = W[P1++];
.Lword_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw)
ENTRY(_outsb)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -42,10 +48,12 @@
LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
.Lbyte_loop_s: R0 = B[P1++];
.Lbyte_loop_e: B[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsb)
ENTRY(_outsw_8)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
@@ -56,5 +64,5 @@
R0 = R0 << 8;
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 790c767..ab4a925 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -58,6 +58,8 @@
1:
.ifeqs "\flushins", BROK_FLUSH_INST
\flushins [P0++];
+ nop;
+ nop;
2: nop;
.else
2: \flushins [P0++];
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 4422189..c49be84 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -72,11 +72,6 @@
INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
.init.setup : { INIT_SETUP(16) }
-#ifdef CONFIG_ETRAX_ARCH_V32
- __start___param = .;
- __param : { *(__param) }
- __stop___param = .;
-#endif
.initcall.init : {
INIT_CALLS
}
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 991d599..fe56a23 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -240,6 +240,12 @@
* claims to support kexec.
*/
int (*machine_kexec_prepare)(struct kimage *image);
+
+ /* Called to perform the _real_ kexec.
+ * Do NOT allocate memory or fail here. We are past the point of
+ * no return.
+ */
+ void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_SUSPEND
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 49a170a..a5f8672 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -87,7 +87,10 @@
save_ftrace_enabled = __ftrace_enabled_save();
- default_machine_kexec(image);
+ if (ppc_md.machine_kexec)
+ ppc_md.machine_kexec(image);
+ else
+ default_machine_kexec(image);
__ftrace_enabled_restore(save_ftrace_enabled);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7a1d5cb..8303a6c 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -353,6 +353,7 @@
prime_debug_regs(new_thread);
}
#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
static void set_debug_reg_defaults(struct thread_struct *thread)
{
if (thread->dabr) {
@@ -360,6 +361,7 @@
set_dabr(0);
}
}
+#endif /* !CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
int set_dabr(unsigned long dabr)
@@ -670,11 +672,11 @@
{
discard_lazy_cpu_state();
-#ifdef CONFIG_HAVE_HW_BREAKPOINTS
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
flush_ptrace_hw_breakpoint(current);
-#else /* CONFIG_HAVE_HW_BREAKPOINTS */
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
set_debug_reg_defaults(¤t->thread);
-#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
}
void
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1ec0657..c14d09f 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -38,13 +38,11 @@
* neesd to be flushed. This function will either perform the flush
* immediately or will batch it up if the current CPU has an active
* batch on it.
- *
- * Must be called from within some kind of spinlock/non-preempt region...
*/
void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, unsigned long pte, int huge)
{
- struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+ struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
unsigned long vsid, vaddr;
unsigned int psize;
int ssize;
@@ -99,6 +97,7 @@
*/
if (!batch->active) {
flush_hash_page(vaddr, rpte, psize, ssize, 0);
+ put_cpu_var(ppc64_tlb_batch);
return;
}
@@ -127,6 +126,7 @@
batch->index = ++i;
if (i >= PPC64_TLB_BATCH_NR)
__flush_tlb_pending(batch);
+ put_cpu_var(ppc64_tlb_batch);
}
/*
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1..2751b3a 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@
unsigned long output_addr;
unsigned char *output;
- check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+ output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+ check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
memset(&_bss, 0, &_ebss - &_bss);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+ output = (unsigned char *) output_addr;
#ifdef CONFIG_BLK_DEV_INITRD
/*
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index f42dbab..48884f8 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -38,6 +38,7 @@
BUG_ON(ret != bsize);
data += bsize - index;
len -= bsize - index;
+ index = 0;
}
/* process as many blocks as possible */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea1..5c5ba10 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
static inline int atomic_read(const atomic_t *v)
{
- barrier();
- return v->counter;
+ int c;
+
+ asm volatile(
+ " l %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic_set(atomic_t *v, int i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " st %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@
static inline long long atomic64_read(const atomic64_t *v)
{
- barrier();
- return v->counter;
+ long long c;
+
+ asm volatile(
+ " lg %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic64_set(atomic64_t *v, long long i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " stg %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa6..2a30d5a 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
#define L1_CACHE_BYTES 256
#define L1_CACHE_SHIFT 8
+#define NET_SKB_PAD 32
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index a78701d..4a53500 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -3,7 +3,7 @@
#include <asm-generic/sections.h>
-extern void __nosave_begin, __nosave_end;
+extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 672944f..e53b4b3 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -14,7 +14,7 @@
#include <linux/io.h>
#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
-#include <asm/machtypes.h>
+#include <generated/machtypes.h>
static struct resource rtc_resources[] = {
[0] = {
@@ -255,12 +255,17 @@
void __init plat_early_device_setup(void)
{
+ struct platform_device *dev[1];
+
if (mach_is_rts7751r2d()) {
scif_platform_data.scscr |= SCSCR_CKE1;
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
} else {
- early_platform_add_devices(&sci_device, 1);
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &sci_device;
+ early_platform_add_devices(dev, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
}
early_platform_add_devices(sh7750_early_devices,
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index faa8f86..0901b2f 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -10,6 +10,16 @@
void __delay(unsigned long loops)
{
__asm__ __volatile__(
+ /*
+ * ST40-300 appears to have an issue with this code,
+ * normally taking two cycles each loop, as with all
+ * other SH variants. If however the branch and the
+ * delay slot straddle an 8 byte boundary, this increases
+ * to 3 cycles.
+ * This align directive ensures this doesn't occur.
+ */
+ ".balign 8\n\t"
+
"tst %0, %0\n\t"
"1:\t"
"bf/s 1b\n\t"
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 88d3dc3..5a580ea 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -108,7 +108,8 @@
kunmap_atomic(vfrom, KM_USER0);
}
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
+ (vma->vm_flags & VM_EXEC))
__flush_purge_region(vto, PAGE_SIZE);
kunmap_atomic(vto, KM_USER1);
diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h
index a2f5c61..843e4fa 100644
--- a/arch/sparc/include/asm/pcr.h
+++ b/arch/sparc/include/asm/pcr.h
@@ -43,4 +43,6 @@
extern u64 pcr_enable;
+extern int pcr_arch_init(void);
+
#endif /* __PCR_H */
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 47977a7..72509d0 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -255,10 +255,9 @@
static int iommu_alloc_ctx(struct iommu *iommu)
{
int lowest = iommu->ctx_lowest_free;
- int sz = IOMMU_NUM_CTXS - lowest;
- int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest);
+ int n = find_next_zero_bit(iommu->ctx_bitmap, IOMMU_NUM_CTXS, lowest);
- if (unlikely(n == sz)) {
+ if (unlikely(n == IOMMU_NUM_CTXS)) {
n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1);
if (unlikely(n == lowest)) {
printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index ae96cf5..7c2ced6 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -167,5 +167,3 @@
unregister_perf_hsvc();
return err;
}
-
-early_initcall(pcr_arch_init);
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index b6a2b8f..555a76d 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -49,6 +49,7 @@
#include <asm/mdesc.h>
#include <asm/ldc.h>
#include <asm/hypervisor.h>
+#include <asm/pcr.h>
#include "cpumap.h"
@@ -1358,6 +1359,7 @@
void __init smp_cpus_done(unsigned int max_cpus)
{
+ pcr_arch_init();
}
void smp_send_reschedule(int cpu)
diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S
index 8cc0345..8f096e8 100644
--- a/arch/sparc/kernel/una_asm_32.S
+++ b/arch/sparc/kernel/una_asm_32.S
@@ -24,9 +24,9 @@
.globl __do_int_store
__do_int_store:
ld [%o2], %g1
- cmp %1, 2
+ cmp %o1, 2
be 2f
- cmp %1, 4
+ cmp %o1, 4
be 1f
srl %g1, 24, %g2
srl %g1, 16, %g7
diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c
index 764b3eb..48d00e7 100644
--- a/arch/sparc/lib/bitext.c
+++ b/arch/sparc/lib/bitext.c
@@ -10,7 +10,7 @@
*/
#include <linux/string.h>
-#include <linux/bitops.h>
+#include <linux/bitmap.h>
#include <asm/bitext.h>
@@ -80,8 +80,7 @@
while (test_bit(offset + i, t->map) == 0) {
i++;
if (i == len) {
- for (i = 0; i < len; i++)
- __set_bit(offset + i, t->map);
+ bitmap_set(t->map, offset, len);
if (offset == t->first_free)
t->first_free = find_next_zero_bit
(t->map, t->size,
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 211ca3f..4ea15ca 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -88,6 +88,7 @@
extern int acpi_pci_disabled;
extern int acpi_skip_timer_override;
extern int acpi_use_timer_override;
+extern int acpi_fix_pin2_polarity;
extern u8 acpi_sci_flags;
extern int acpi_sci_override_gsi;
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 4d0dfa0..43a18c7 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -36,6 +36,11 @@
#define MSR_IA32_PERFCTR1 0x000000c2
#define MSR_FSB_FREQ 0x000000cd
+#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
+#define NHM_C3_AUTO_DEMOTE (1UL << 25)
+#define NHM_C1_AUTO_DEMOTE (1UL << 26)
+#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25)
+
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index e2f6a99..cc29086 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -22,6 +22,7 @@
#define ARCH_P4_CNTRVAL_BITS (40)
#define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1)
+#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1))
#define P4_ESCR_EVENT_MASK 0x7e000000U
#define P4_ESCR_EVENT_SHIFT 25
diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
index 6c22bf3..725b778 100644
--- a/arch/x86/include/asm/smpboot_hooks.h
+++ b/arch/x86/include/asm/smpboot_hooks.h
@@ -34,7 +34,7 @@
*/
CMOS_WRITE(0, 0xf);
- *((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
+ *((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0;
}
static inline void __init smpboot_setup_io_apic(void)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index b3a7113..3e6e2d6 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -72,6 +72,7 @@
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
int acpi_use_timer_override __initdata;
+int acpi_fix_pin2_polarity __initdata;
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -415,10 +416,15 @@
return 0;
}
- if (acpi_skip_timer_override &&
- intsrc->source_irq == 0 && intsrc->global_irq == 2) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
- return 0;
+ if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (acpi_skip_timer_override) {
+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ return 0;
+ }
+ if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+ intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
+ printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
+ }
}
mp_override_legacy_irq(intsrc->source_irq,
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 51ef31a..51d4e16 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -284,7 +284,7 @@
memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
- apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
+ adev->evt.rating = APBT_CLOCKEVENT_RATING - 100;
global_clock_event = &adev->evt;
printk(KERN_DEBUG "%s clockevent registered as global\n",
global_clock_event->name);
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index bd1cac7..52c9364 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -158,9 +158,9 @@
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
- printk(KERN_WARNING PFX "Warning: EST-capable CPU "
- "detected. The acpi-cpufreq module offers "
- "voltage scaling in addition of frequency "
+ printk_once(KERN_WARNING PFX "Warning: EST-capable "
+ "CPU detected. The acpi-cpufreq module offers "
+ "voltage scaling in addition to frequency "
"scaling. You should use that instead of "
"p4-clockmod, if possible.\n");
switch (c->x86_model) {
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 35c7e65..c567dec 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1537,6 +1537,7 @@
static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0, cpu;
+ int rv;
for_each_online_cpu(i) {
int rc;
@@ -1555,14 +1556,14 @@
cpb_capable = true;
- register_cpu_notifier(&cpb_nb);
-
msrs = msrs_alloc();
if (!msrs) {
printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
return -ENOMEM;
}
+ register_cpu_notifier(&cpb_nb);
+
rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
for_each_cpu(cpu, cpu_online_mask) {
@@ -1574,7 +1575,13 @@
(cpb_enabled ? "on" : "off"));
}
- return cpufreq_register_driver(&cpufreq_amd64_driver);
+ rv = cpufreq_register_driver(&cpufreq_amd64_driver);
+ if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) {
+ unregister_cpu_notifier(&cpb_nb);
+ msrs_free(msrs);
+ msrs = NULL;
+ }
+ return rv;
}
/* driver entry point for term */
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index f7a0993..ff751a9 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -770,9 +770,14 @@
return 1;
}
- /* it might be unflagged overflow */
- rdmsrl(hwc->event_base + hwc->idx, v);
- if (!(v & ARCH_P4_CNTRVAL_MASK))
+ /*
+ * In some circumstances the overflow might issue an NMI but did
+ * not set P4_CCCR_OVF bit. Because a counter holds a negative value
+ * we simply check for high bit being set, if it's cleared it means
+ * the counter has reached zero value and continued counting before
+ * real NMI signal was received:
+ */
+ if (!(v & ARCH_P4_UNFLAGGED_BIT))
return 1;
return 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 76b8cd9..9efbdcc 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -143,15 +143,10 @@
static u32 __init ati_sbx00_rev(int num, int slot, int func)
{
- u32 old, d;
+ u32 d;
- d = read_pci_config(num, slot, func, 0x70);
- old = d;
- d &= ~(1<<8);
- write_pci_config(num, slot, func, 0x70, d);
d = read_pci_config(num, slot, func, 0x8);
d &= 0xff;
- write_pci_config(num, slot, func, 0x70, old);
return d;
}
@@ -160,11 +155,14 @@
{
u32 d, rev;
- if (acpi_use_timer_override)
+ rev = ati_sbx00_rev(num, slot, func);
+ if (rev >= 0x40)
+ acpi_fix_pin2_polarity = 1;
+
+ if (rev > 0x13)
return;
- rev = ati_sbx00_rev(num, slot, func);
- if (rev > 0x13)
+ if (acpi_use_timer_override)
return;
/* check for IRQ0 interrupt swap */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index fc7aae1..715037c 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -285,6 +285,14 @@
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
+ { /* Handle problems with rebooting on VersaLogic Menlow boards */
+ .callback = set_bios_reboot,
+ .ident = "VersaLogic Menlow based board",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 54ce246..63fec15 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2777,6 +2777,8 @@
kvm_register_write(&svm->vcpu, reg, val);
}
+ skip_emulated_instruction(&svm->vcpu);
+
return 1;
}
diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index dab8746..044bda5 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -140,8 +140,7 @@
* wasted bootmem) and hand off chunks of it to callers.
*/
res = alloc_bootmem(chunk_size);
- if (!res)
- return NULL;
+ BUG_ON(!res);
prom_early_allocated += chunk_size;
memset(res, 0, chunk_size);
free_mem = chunk_size;
diff --git a/block/blk-core.c b/block/blk-core.c
index 2f4002f..518dd42 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -352,7 +352,7 @@
WARN_ON(!irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
- __blk_run_queue(q);
+ __blk_run_queue(q, false);
}
EXPORT_SYMBOL(blk_start_queue);
@@ -403,13 +403,14 @@
/**
* __blk_run_queue - run a single device queue
* @q: The queue to run
+ * @force_kblockd: Don't run @q->request_fn directly. Use kblockd.
*
* Description:
* See @blk_run_queue. This variant must be called with the queue lock
* held and interrupts disabled.
*
*/
-void __blk_run_queue(struct request_queue *q)
+void __blk_run_queue(struct request_queue *q, bool force_kblockd)
{
blk_remove_plug(q);
@@ -423,7 +424,7 @@
* Only recurse once to avoid overrunning the stack, let the unplug
* handling reinvoke the handler shortly if we already got there.
*/
- if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
+ if (!force_kblockd && !queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
q->request_fn(q);
queue_flag_clear(QUEUE_FLAG_REENTER, q);
} else {
@@ -446,7 +447,7 @@
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
- __blk_run_queue(q);
+ __blk_run_queue(q, false);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_run_queue);
@@ -1053,7 +1054,7 @@
drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where, 0);
- __blk_run_queue(q);
+ __blk_run_queue(q, false);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_insert_request);
@@ -2610,13 +2611,6 @@
}
EXPORT_SYMBOL(kblockd_schedule_work);
-int kblockd_schedule_delayed_work(struct request_queue *q,
- struct delayed_work *dwork, unsigned long delay)
-{
- return queue_delayed_work(kblockd_workqueue, dwork, delay);
-}
-EXPORT_SYMBOL(kblockd_schedule_delayed_work);
-
int __init blk_dev_init(void)
{
BUILD_BUG_ON(__REQ_NR_BITS > 8 *
diff --git a/block/blk-flush.c b/block/blk-flush.c
index 54b123d..b27d020 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -66,10 +66,12 @@
/*
* Moving a request silently to empty queue_head may stall the
- * queue. Kick the queue in those cases.
+ * queue. Kick the queue in those cases. This function is called
+ * from request completion path and calling directly into
+ * request_fn may confuse the driver. Always use kblockd.
*/
if (was_empty && next_rq)
- __blk_run_queue(q);
+ __blk_run_queue(q, true);
}
static void pre_flush_end_io(struct request *rq, int error)
@@ -130,7 +132,7 @@
BUG();
}
- elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
+ elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
return rq;
}
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1a320d2..eec78be 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -132,7 +132,7 @@
}
/**
- * blkdev_issue_zeroout generate number of zero filed write bios
+ * blkdev_issue_zeroout - generate number of zero filed write bios
* @bdev: blockdev to issue
* @sector: start sector
* @nr_sects: number of sectors to write
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a89043a..e36cc10 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -20,6 +20,11 @@
/* Throttling is performed over 100ms slice and after that slice is renewed */
static unsigned long throtl_slice = HZ/10; /* 100 ms */
+/* A workqueue to queue throttle related work */
+static struct workqueue_struct *kthrotld_workqueue;
+static void throtl_schedule_delayed_work(struct throtl_data *td,
+ unsigned long delay);
+
struct throtl_rb_root {
struct rb_root rb;
struct rb_node *left;
@@ -345,10 +350,9 @@
update_min_dispatch_time(st);
if (time_before_eq(st->min_disptime, jiffies))
- throtl_schedule_delayed_work(td->queue, 0);
+ throtl_schedule_delayed_work(td, 0);
else
- throtl_schedule_delayed_work(td->queue,
- (st->min_disptime - jiffies));
+ throtl_schedule_delayed_work(td, (st->min_disptime - jiffies));
}
static inline void
@@ -815,10 +819,10 @@
}
/* Call with queue lock held */
-void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay)
+static void
+throtl_schedule_delayed_work(struct throtl_data *td, unsigned long delay)
{
- struct throtl_data *td = q->td;
struct delayed_work *dwork = &td->throtl_work;
if (total_nr_queued(td) > 0) {
@@ -827,12 +831,11 @@
* Cancel that and schedule a new one.
*/
__cancel_delayed_work(dwork);
- kblockd_schedule_delayed_work(q, dwork, delay);
+ queue_delayed_work(kthrotld_workqueue, dwork, delay);
throtl_log(td, "schedule work. delay=%lu jiffies=%lu",
delay, jiffies);
}
}
-EXPORT_SYMBOL(throtl_schedule_delayed_work);
static void
throtl_destroy_tg(struct throtl_data *td, struct throtl_grp *tg)
@@ -920,7 +923,7 @@
smp_mb__after_atomic_inc();
/* Schedule a work now to process the limit change */
- throtl_schedule_delayed_work(td->queue, 0);
+ throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_write_bps(void *key,
@@ -934,7 +937,7 @@
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
- throtl_schedule_delayed_work(td->queue, 0);
+ throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_read_iops(void *key,
@@ -948,7 +951,7 @@
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
- throtl_schedule_delayed_work(td->queue, 0);
+ throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_write_iops(void *key,
@@ -962,7 +965,7 @@
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
- throtl_schedule_delayed_work(td->queue, 0);
+ throtl_schedule_delayed_work(td, 0);
}
void throtl_shutdown_timer_wq(struct request_queue *q)
@@ -1135,6 +1138,10 @@
static int __init throtl_init(void)
{
+ kthrotld_workqueue = alloc_workqueue("kthrotld", WQ_MEM_RECLAIM, 0);
+ if (!kthrotld_workqueue)
+ panic("Failed to create kthrotld\n");
+
blkio_policy_register(&blkio_policy_throtl);
return 0;
}
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 7be4c79..ea83a4f 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3355,7 +3355,7 @@
cfqd->busy_queues > 1) {
cfq_del_timer(cfqd, cfqq);
cfq_clear_cfqq_wait_request(cfqq);
- __blk_run_queue(cfqd->queue);
+ __blk_run_queue(cfqd->queue, false);
} else {
cfq_blkiocg_update_idle_time_stats(
&cfqq->cfqg->blkg);
@@ -3370,7 +3370,7 @@
* this new queue is RT and the current one is BE
*/
cfq_preempt_queue(cfqd, cfqq);
- __blk_run_queue(cfqd->queue);
+ __blk_run_queue(cfqd->queue, false);
}
}
@@ -3731,7 +3731,7 @@
struct request_queue *q = cfqd->queue;
spin_lock_irq(q->queue_lock);
- __blk_run_queue(cfqd->queue);
+ __blk_run_queue(cfqd->queue, false);
spin_unlock_irq(q->queue_lock);
}
diff --git a/block/elevator.c b/block/elevator.c
index 2569512..236e93c 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -602,7 +602,7 @@
*/
elv_drain_elevator(q);
while (q->rq.elvpriv) {
- __blk_run_queue(q);
+ __blk_run_queue(q, false);
spin_unlock_irq(q->queue_lock);
msleep(10);
spin_lock_irq(q->queue_lock);
@@ -651,7 +651,7 @@
* with anything. There's no point in delaying queue
* processing.
*/
- __blk_run_queue(q);
+ __blk_run_queue(q, false);
break;
case ELEVATOR_INSERT_SORT:
diff --git a/block/genhd.c b/block/genhd.c
index 6a5b772..cbf1112 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1355,7 +1355,7 @@
struct block_device *bdev = bdget_disk(disk, partno);
if (bdev) {
fsync_bdev(bdev);
- res = __invalidate_device(bdev);
+ res = __invalidate_device(bdev, true);
bdput(bdev);
}
return res;
diff --git a/block/ioctl.c b/block/ioctl.c
index 9049d46..1124cd2 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -294,9 +294,11 @@
return -EINVAL;
if (get_user(n, (int __user *) arg))
return -EFAULT;
- if (!(mode & FMODE_EXCL) &&
- blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0)
- return -EBUSY;
+ if (!(mode & FMODE_EXCL)) {
+ bdgrab(bdev);
+ if (blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0)
+ return -EBUSY;
+ }
ret = set_blocksize(bdev, n);
if (!(mode & FMODE_EXCL))
blkdev_put(bdev, mode | FMODE_EXCL);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 54784bb..edc2586 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -416,10 +416,15 @@
u8 originally_enabled; /* True if GPE was originally enabled */
};
+struct acpi_gpe_notify_object {
+ struct acpi_namespace_node *node;
+ struct acpi_gpe_notify_object *next;
+};
+
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
- struct acpi_namespace_node *device_node; /* Parent _PRW device for implicit notify */
+ struct acpi_gpe_notify_object device; /* List of _PRW devices for implicit notify */
};
/*
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 14988a8..f472521 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -457,6 +457,7 @@
acpi_status status;
struct acpi_gpe_event_info *local_gpe_event_info;
struct acpi_evaluate_info *info;
+ struct acpi_gpe_notify_object *notify_object;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
@@ -508,10 +509,18 @@
* from this thread -- because handlers may in turn run other
* control methods.
*/
- status =
- acpi_ev_queue_notify_request(local_gpe_event_info->dispatch.
- device_node,
- ACPI_NOTIFY_DEVICE_WAKE);
+ status = acpi_ev_queue_notify_request(
+ local_gpe_event_info->dispatch.device.node,
+ ACPI_NOTIFY_DEVICE_WAKE);
+
+ notify_object = local_gpe_event_info->dispatch.device.next;
+ while (ACPI_SUCCESS(status) && notify_object) {
+ status = acpi_ev_queue_notify_request(
+ notify_object->node,
+ ACPI_NOTIFY_DEVICE_WAKE);
+ notify_object = notify_object->next;
+ }
+
break;
case ACPI_GPE_DISPATCH_METHOD:
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 3b20a34..52aaff3 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -198,7 +198,9 @@
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_namespace_node *device_node;
+ struct acpi_gpe_notify_object *notify_object;
acpi_cpu_flags flags;
+ u8 gpe_dispatch_mask;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
@@ -221,27 +223,49 @@
goto unlock_and_exit;
}
+ if (wake_device == ACPI_ROOT_OBJECT) {
+ goto out;
+ }
+
/*
* If there is no method or handler for this GPE, then the
* wake_device will be notified whenever this GPE fires (aka
* "implicit notify") Note: The GPE is assumed to be
* level-triggered (for windows compatibility).
*/
- if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
- ACPI_GPE_DISPATCH_NONE) && (wake_device != ACPI_ROOT_OBJECT)) {
-
- /* Validate wake_device is of type Device */
-
- device_node = ACPI_CAST_PTR(struct acpi_namespace_node,
- wake_device);
- if (device_node->type != ACPI_TYPE_DEVICE) {
- goto unlock_and_exit;
- }
- gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
- ACPI_GPE_LEVEL_TRIGGERED);
- gpe_event_info->dispatch.device_node = device_node;
+ gpe_dispatch_mask = gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK;
+ if (gpe_dispatch_mask != ACPI_GPE_DISPATCH_NONE
+ && gpe_dispatch_mask != ACPI_GPE_DISPATCH_NOTIFY) {
+ goto out;
}
+ /* Validate wake_device is of type Device */
+
+ device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ if (device_node->type != ACPI_TYPE_DEVICE) {
+ goto unlock_and_exit;
+ }
+
+ if (gpe_dispatch_mask == ACPI_GPE_DISPATCH_NONE) {
+ gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
+ ACPI_GPE_LEVEL_TRIGGERED);
+ gpe_event_info->dispatch.device.node = device_node;
+ gpe_event_info->dispatch.device.next = NULL;
+ } else {
+ /* There are multiple devices to notify implicitly. */
+
+ notify_object = ACPI_ALLOCATE_ZEROED(sizeof(*notify_object));
+ if (!notify_object) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
+
+ notify_object->node = device_node;
+ notify_object->next = gpe_event_info->dispatch.device.next;
+ gpe_event_info->dispatch.device.next = notify_object;
+ }
+
+ out:
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c
index 5df67f1..384f7ab 100644
--- a/drivers/acpi/debugfs.c
+++ b/drivers/acpi/debugfs.c
@@ -26,7 +26,9 @@
size_t count, loff_t *ppos)
{
static char *buf;
- static int uncopied_bytes;
+ static u32 max_size;
+ static u32 uncopied_bytes;
+
struct acpi_table_header table;
acpi_status status;
@@ -37,19 +39,24 @@
if (copy_from_user(&table, user_buf,
sizeof(struct acpi_table_header)))
return -EFAULT;
- uncopied_bytes = table.length;
- buf = kzalloc(uncopied_bytes, GFP_KERNEL);
+ uncopied_bytes = max_size = table.length;
+ buf = kzalloc(max_size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
}
- if (uncopied_bytes < count) {
- kfree(buf);
+ if (buf == NULL)
return -EINVAL;
- }
+
+ if ((*ppos > max_size) ||
+ (*ppos + count > max_size) ||
+ (*ppos + count < count) ||
+ (count > uncopied_bytes))
+ return -EINVAL;
if (copy_from_user(buf + (*ppos), user_buf, count)) {
kfree(buf);
+ buf = NULL;
return -EFAULT;
}
@@ -59,6 +66,7 @@
if (!uncopied_bytes) {
status = acpi_install_method(buf);
kfree(buf);
+ buf = NULL;
if (ACPI_FAILURE(status))
return -EINVAL;
add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 73fb1c4..25ef1a4 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -866,8 +866,9 @@
}
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
- if (!skb && net_ratelimit()) {
- dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
+ if (!skb) {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
return -ENOMEM;
}
header = (void *)skb_put(skb, sizeof(*header));
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b9ba04f..77fc76f 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3281,7 +3281,7 @@
struct block_device *bdev = opened_bdev[cnt];
if (!bdev || ITYPE(drive_state[cnt].fd_device) != type)
continue;
- __invalidate_device(bdev);
+ __invalidate_device(bdev, true);
}
mutex_unlock(&open_lock);
} else {
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 49e6a54..dbf31ec 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -78,7 +78,6 @@
#include <asm/uaccess.h>
-static DEFINE_MUTEX(loop_mutex);
static LIST_HEAD(loop_devices);
static DEFINE_MUTEX(loop_devices_mutex);
@@ -1501,11 +1500,9 @@
{
struct loop_device *lo = bdev->bd_disk->private_data;
- mutex_lock(&loop_mutex);
mutex_lock(&lo->lo_ctl_mutex);
lo->lo_refcnt++;
mutex_unlock(&lo->lo_ctl_mutex);
- mutex_unlock(&loop_mutex);
return 0;
}
@@ -1515,7 +1512,6 @@
struct loop_device *lo = disk->private_data;
int err;
- mutex_lock(&loop_mutex);
mutex_lock(&lo->lo_ctl_mutex);
if (--lo->lo_refcnt)
@@ -1540,7 +1536,6 @@
out:
mutex_unlock(&lo->lo_ctl_mutex);
out_unlocked:
- mutex_unlock(&loop_mutex);
return 0;
}
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index a126e61..6dcd55a 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -39,6 +39,11 @@
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ /* Atheros AR9285 Malbec with sflash firmware */
+ { USB_DEVICE(0x03F0, 0x311D) },
+
+ /* Atheros AR5BBU12 with sflash firmware */
+ { USB_DEVICE(0x0489, 0xE02C) },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1da773f8..700a384 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -102,6 +102,12 @@
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ /* Atheros AR9285 Malbec with sflash firmware */
+ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
+
+ /* Atheros AR5BBU12 with sflash firmware */
+ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -826,7 +832,7 @@
if (hdev->conn_hash.sco_num > 0) {
if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
- err = usb_autopm_get_interface(data->isoc);
+ err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
if (err < 0) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
@@ -855,7 +861,7 @@
__set_isoc_interface(hdev, 0);
if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
- usb_autopm_put_interface(data->isoc);
+ usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
}
}
@@ -1038,8 +1044,6 @@
usb_set_intfdata(intf, data);
- usb_enable_autosuspend(interface_to_usbdev(intf));
-
return 0;
}
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 9252e85..780498d 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -773,18 +773,23 @@
#else
printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
#endif
+ pci_unregister_driver(&agp_amd64_pci_driver);
return -ENODEV;
}
/* First check that we have at least one AMD64 NB */
- if (!pci_dev_present(amd_nb_misc_ids))
+ if (!pci_dev_present(amd_nb_misc_ids)) {
+ pci_unregister_driver(&agp_amd64_pci_driver);
return -ENODEV;
+ }
/* Look for any AGP bridge */
agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table;
err = driver_attach(&agp_amd64_pci_driver.driver);
- if (err == 0 && agp_bridges_found == 0)
+ if (err == 0 && agp_bridges_found == 0) {
+ pci_unregister_driver(&agp_amd64_pci_driver);
err = -ENODEV;
+ }
}
return err;
}
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index c195bfe..5feebe2 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -130,6 +130,7 @@
#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
#define I915_IFPADDR 0x60
+#define I830_HIC 0x70
/* Intel 965G registers */
#define I965_MSAC 0x62
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index fab3d32..0d09b53 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
+#include <linux/delay.h>
#include <asm/smp.h>
#include "agp.h"
#include "intel-agp.h"
@@ -70,12 +71,8 @@
u32 __iomem *gtt; /* I915G */
bool clear_fake_agp; /* on first access via agp, fill with scratch */
int num_dcache_entries;
- union {
- void __iomem *i9xx_flush_page;
- void *i8xx_flush_page;
- };
+ void __iomem *i9xx_flush_page;
char *i81x_gtt_table;
- struct page *i8xx_page;
struct resource ifp_resource;
int resource_valid;
struct page *scratch_page;
@@ -722,28 +719,6 @@
static void i830_cleanup(void)
{
- if (intel_private.i8xx_flush_page) {
- kunmap(intel_private.i8xx_flush_page);
- intel_private.i8xx_flush_page = NULL;
- }
-
- __free_page(intel_private.i8xx_page);
- intel_private.i8xx_page = NULL;
-}
-
-static void intel_i830_setup_flush(void)
-{
- /* return if we've already set the flush mechanism up */
- if (intel_private.i8xx_page)
- return;
-
- intel_private.i8xx_page = alloc_page(GFP_KERNEL);
- if (!intel_private.i8xx_page)
- return;
-
- intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
- if (!intel_private.i8xx_flush_page)
- i830_cleanup();
}
/* The chipset_flush interface needs to get data that has already been
@@ -758,14 +733,27 @@
*/
static void i830_chipset_flush(void)
{
- unsigned int *pg = intel_private.i8xx_flush_page;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
- memset(pg, 0, 1024);
+ /* Forcibly evict everything from the CPU write buffers.
+ * clflush appears to be insufficient.
+ */
+ wbinvd_on_all_cpus();
- if (cpu_has_clflush)
- clflush_cache_range(pg, 1024);
- else if (wbinvd_on_all_cpus() != 0)
- printk(KERN_ERR "Timed out waiting for cache flush.\n");
+ /* Now we've only seen documents for this magic bit on 855GM,
+ * we hope it exists for the other gen2 chipsets...
+ *
+ * Also works as advertised on my 845G.
+ */
+ writel(readl(intel_private.registers+I830_HIC) | (1<<31),
+ intel_private.registers+I830_HIC);
+
+ while (readl(intel_private.registers+I830_HIC) & (1<<31)) {
+ if (time_after(jiffies, timeout))
+ break;
+
+ udelay(50);
+ }
}
static void i830_write_entry(dma_addr_t addr, unsigned int entry,
@@ -849,8 +837,6 @@
intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE;
- intel_i830_setup_flush();
-
return 0;
}
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 777181a..bcbbc71 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -830,8 +830,7 @@
test_bit(IS_ANY_T1, &dev->flags))) {
DEBUGP(4, dev, "Perform AUTOPPS\n");
set_bit(IS_AUTOPPS_ACT, &dev->flags);
- ptsreq.protocol = ptsreq.protocol =
- (0x01 << dev->proto);
+ ptsreq.protocol = (0x01 << dev->proto);
ptsreq.flags = 0x01;
ptsreq.pts1 = 0x00;
ptsreq.pts2 = 0x00;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 94b8eb4..444155a 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -78,7 +78,6 @@
static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data)
{
struct ipw_dev *ipw = priv_data;
- struct resource *io_resource;
int ret;
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -92,9 +91,12 @@
if (ret)
return ret;
- io_resource = request_region(p_dev->resource[0]->start,
- resource_size(p_dev->resource[0]),
- IPWIRELESS_PCCARD_NAME);
+ if (!request_region(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]),
+ IPWIRELESS_PCCARD_NAME)) {
+ ret = -EBUSY;
+ goto exit;
+ }
p_dev->resource[2]->flags |=
WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
@@ -105,22 +107,25 @@
ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr);
if (ret != 0)
- goto exit2;
+ goto exit1;
ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100;
- ipw->attr_memory = ioremap(p_dev->resource[2]->start,
+ ipw->common_memory = ioremap(p_dev->resource[2]->start,
resource_size(p_dev->resource[2]));
- request_mem_region(p_dev->resource[2]->start,
- resource_size(p_dev->resource[2]),
- IPWIRELESS_PCCARD_NAME);
+ if (!request_mem_region(p_dev->resource[2]->start,
+ resource_size(p_dev->resource[2]),
+ IPWIRELESS_PCCARD_NAME)) {
+ ret = -EBUSY;
+ goto exit2;
+ }
p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM |
WIN_ENABLE;
p_dev->resource[3]->end = 0; /* this used to be 0x1000 */
ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0);
if (ret != 0)
- goto exit2;
+ goto exit3;
ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0);
if (ret != 0)
@@ -128,23 +133,28 @@
ipw->attr_memory = ioremap(p_dev->resource[3]->start,
resource_size(p_dev->resource[3]));
- request_mem_region(p_dev->resource[3]->start,
- resource_size(p_dev->resource[3]),
- IPWIRELESS_PCCARD_NAME);
+ if (!request_mem_region(p_dev->resource[3]->start,
+ resource_size(p_dev->resource[3]),
+ IPWIRELESS_PCCARD_NAME)) {
+ ret = -EBUSY;
+ goto exit4;
+ }
return 0;
+exit4:
+ iounmap(ipw->attr_memory);
exit3:
+ release_mem_region(p_dev->resource[2]->start,
+ resource_size(p_dev->resource[2]));
exit2:
- if (ipw->common_memory) {
- release_mem_region(p_dev->resource[2]->start,
- resource_size(p_dev->resource[2]));
- iounmap(ipw->common_memory);
- }
+ iounmap(ipw->common_memory);
exit1:
- release_resource(io_resource);
+ release_region(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]));
+exit:
pcmcia_disable_device(p_dev);
- return -1;
+ return ret;
}
static int config_ipwireless(struct ipw_dev *ipw)
@@ -219,6 +229,8 @@
static void release_ipwireless(struct ipw_dev *ipw)
{
+ release_region(ipw->link->resource[0]->start,
+ resource_size(ipw->link->resource[0]));
if (ipw->common_memory) {
release_mem_region(ipw->link->resource[2]->start,
resource_size(ipw->link->resource[2]));
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c..1f46f1c 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -364,14 +364,12 @@
tpm_protected_ordinal_duration[ordinal &
TPM_PROTECTED_ORDINAL_MASK];
- if (duration_idx != TPM_UNDEFINED) {
+ if (duration_idx != TPM_UNDEFINED)
duration = chip->vendor.duration[duration_idx];
- /* if duration is 0, it's because chip->vendor.duration wasn't */
- /* filled yet, so we set the lowest timeout just to give enough */
- /* time for tpm_get_timeouts() to succeed */
- return (duration <= 0 ? HZ : duration);
- } else
+ if (duration <= 0)
return 2 * 60 * HZ;
+ else
+ return duration;
}
EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
@@ -577,11 +575,9 @@
if (rc)
return;
- if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
- be32_to_cpu(tpm_cmd.header.out.length)
- != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+ if (be32_to_cpu(tpm_cmd.header.out.return_code)
+ != 3 * sizeof(u32))
return;
-
duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
chip->vendor.duration[TPM_SHORT] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +937,6 @@
}
EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d %d %d\n",
- jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
- jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
- jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff77..72ddb03 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@
char *);
extern ssize_t tpm_show_temp_deactivated(struct device *,
struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
- struct device_attribute *attr, char *);
struct tpm_chip;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e..dd21df5 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@
NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
static struct attribute *tis_attrs[] = {
&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@
&dev_attr_owned.attr,
&dev_attr_temp_deactivated.attr,
&dev_attr_caps.attr,
- &dev_attr_cancel.attr,
- &dev_attr_timeouts.attr, NULL,
+ &dev_attr_cancel.attr, NULL,
};
static struct attribute_group tis_attr_grp = {
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 4903931..84b164d 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -388,6 +388,10 @@
unsigned int len;
int ret;
+ if (!port->portdev) {
+ /* Device has been unplugged. vqs are already gone. */
+ return;
+ }
vq = port->in_vq;
if (port->inbuf)
buf = port->inbuf;
@@ -470,6 +474,10 @@
void *buf;
unsigned int len;
+ if (!port->portdev) {
+ /* Device has been unplugged. vqs are already gone. */
+ return;
+ }
while ((buf = virtqueue_get_buf(port->out_vq, &len))) {
kfree(buf);
port->outvq_full = false;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1109f68..5cb4d09 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1919,8 +1919,10 @@
ret = sysdev_driver_register(&cpu_sysdev_class,
&cpufreq_sysdev_driver);
+ if (ret)
+ goto err_null_driver;
- if ((!ret) && !(cpufreq_driver->flags & CPUFREQ_STICKY)) {
+ if (!(cpufreq_driver->flags & CPUFREQ_STICKY)) {
int i;
ret = -ENODEV;
@@ -1935,21 +1937,22 @@
if (ret) {
dprintk("no CPU initialized for driver %s\n",
driver_data->name);
- sysdev_driver_unregister(&cpu_sysdev_class,
- &cpufreq_sysdev_driver);
-
- spin_lock_irqsave(&cpufreq_driver_lock, flags);
- cpufreq_driver = NULL;
- spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+ goto err_sysdev_unreg;
}
}
- if (!ret) {
- register_hotcpu_notifier(&cpufreq_cpu_notifier);
- dprintk("driver %s up and running\n", driver_data->name);
- cpufreq_debug_enable_ratelimit();
- }
+ register_hotcpu_notifier(&cpufreq_cpu_notifier);
+ dprintk("driver %s up and running\n", driver_data->name);
+ cpufreq_debug_enable_ratelimit();
+ return 0;
+err_sysdev_unreg:
+ sysdev_driver_unregister(&cpu_sysdev_class,
+ &cpufreq_sysdev_driver);
+err_null_driver:
+ spin_lock_irqsave(&cpufreq_driver_lock, flags);
+ cpufreq_driver = NULL;
+ spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(cpufreq_register_driver);
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 6977a1c..f73ef43 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -672,7 +672,7 @@
struct drm_crtc_helper_funcs *crtc_funcs;
u16 *red, *green, *blue, *transp;
struct drm_crtc *crtc;
- int i, rc = 0;
+ int i, j, rc = 0;
int start;
for (i = 0; i < fb_helper->crtc_count; i++) {
@@ -685,7 +685,7 @@
transp = cmap->transp;
start = cmap->start;
- for (i = 0; i < cmap->len; i++) {
+ for (j = 0; j < cmap->len; j++) {
u16 hred, hgreen, hblue, htransp = 0xffff;
hred = *red++;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3dadfa2..28d1d3c 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -164,8 +164,10 @@
* available. In that case we can't account for this and just
* hope for the best.
*/
- if ((vblrc > 0) && (abs(diff_ns) > 1000000))
+ if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) {
atomic_inc(&dev->_vblank_count[crtc]);
+ smp_mb__after_atomic_inc();
+ }
/* Invalidate all timestamps while vblank irq's are off. */
clear_vblank_timestamps(dev, crtc);
@@ -491,6 +493,12 @@
/* Dot clock in Hz: */
dotclock = (u64) crtc->hwmode.clock * 1000;
+ /* Fields of interlaced scanout modes are only halve a frame duration.
+ * Double the dotclock to get halve the frame-/line-/pixelduration.
+ */
+ if (crtc->hwmode.flags & DRM_MODE_FLAG_INTERLACE)
+ dotclock *= 2;
+
/* Valid dotclock? */
if (dotclock > 0) {
/* Convert scanline length in pixels and video dot clock to
@@ -603,14 +611,6 @@
return -EAGAIN;
}
- /* Don't know yet how to handle interlaced or
- * double scan modes. Just no-op for now.
- */
- if (mode->flags & (DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLSCAN)) {
- DRM_DEBUG("crtc %d: Noop due to unsupported mode.\n", crtc);
- return -ENOTSUPP;
- }
-
/* Get current scanout position with system timestamp.
* Repeat query up to DRM_TIMESTAMP_MAXRETRIES times
* if single query takes longer than max_error nanoseconds.
@@ -858,10 +858,11 @@
if (rc) {
tslot = atomic_read(&dev->_vblank_count[crtc]) + diff;
vblanktimestamp(dev, crtc, tslot) = t_vblank;
- smp_wmb();
}
+ smp_mb__before_atomic_inc();
atomic_add(diff, &dev->_vblank_count[crtc]);
+ smp_mb__after_atomic_inc();
}
/**
@@ -1011,7 +1012,8 @@
struct drm_file *file_priv)
{
struct drm_modeset_ctl *modeset = data;
- int crtc, ret = 0;
+ int ret = 0;
+ unsigned int crtc;
/* If drm_vblank_init() hasn't been called yet, just no-op */
if (!dev->num_crtcs)
@@ -1293,15 +1295,16 @@
* e.g., due to spurious vblank interrupts. We need to
* ignore those for accounting.
*/
- if (abs(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
+ if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
/* Store new timestamp in ringbuffer. */
vblanktimestamp(dev, crtc, vblcount + 1) = tvblank;
- smp_wmb();
/* Increment cooked vblank count. This also atomically commits
* the timestamp computed above.
*/
+ smp_mb__before_atomic_inc();
atomic_inc(&dev->_vblank_count[crtc]);
+ smp_mb__after_atomic_inc();
} else {
DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n",
crtc, (int) diff_ns);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3601466..4ff9b6c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -865,7 +865,7 @@
int max_freq;
/* RPSTAT1 is in the GT power well */
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
seq_printf(m, "RPSTAT1: 0x%08x\n", I915_READ(GEN6_RPSTAT1));
@@ -888,7 +888,7 @@
seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
max_freq * 100);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
} else {
seq_printf(m, "no P-state info available\n");
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 17bd766..e33d9be 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1895,6 +1895,17 @@
if (IS_GEN2(dev))
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
+ /* 965GM sometimes incorrectly writes to hardware status page (HWS)
+ * using 32bit addressing, overwriting memory if HWS is located
+ * above 4GB.
+ *
+ * The documentation also mentions an issue with undefined
+ * behaviour if any general state is accessed within a page above 4GB,
+ * which also needs to be handled carefully.
+ */
+ if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
+ dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
+
mmio_bar = IS_GEN2(dev) ? 1 : 0;
dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, 0);
if (!dev_priv->regs) {
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0ad533f..22ec066 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -46,6 +46,9 @@
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0600);
+unsigned int i915_semaphores = 0;
+module_param_named(semaphores, i915_semaphores, int, 0600);
+
unsigned int i915_enable_rc6 = 0;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
@@ -254,7 +257,7 @@
}
}
-void __gen6_force_wake_get(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
int count;
@@ -270,12 +273,22 @@
udelay(10);
}
-void __gen6_force_wake_put(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE, 0);
POSTING_READ(FORCEWAKE);
}
+void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
+{
+ int loop = 500;
+ u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+ while (fifo < 20 && loop--) {
+ udelay(10);
+ fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+ }
+}
+
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 65dfe81..456f404 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -956,6 +956,7 @@
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern unsigned int i915_semaphores;
extern unsigned int i915_lvds_downclock;
extern unsigned int i915_panel_use_ssc;
extern unsigned int i915_enable_rc6;
@@ -1177,6 +1178,9 @@
void i915_gem_free_all_phys_object(struct drm_device *dev);
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
+uint32_t
+i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
+
/* i915_gem_gtt.c */
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
@@ -1353,22 +1357,32 @@
* must be set to prevent GT core from power down and stale values being
* returned.
*/
-void __gen6_force_wake_get(struct drm_i915_private *dev_priv);
-void __gen6_force_wake_put (struct drm_i915_private *dev_priv);
-static inline u32 i915_safe_read(struct drm_i915_private *dev_priv, u32 reg)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
+
+static inline u32 i915_gt_read(struct drm_i915_private *dev_priv, u32 reg)
{
u32 val;
if (dev_priv->info->gen >= 6) {
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
val = I915_READ(reg);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
} else
val = I915_READ(reg);
return val;
}
+static inline void i915_gt_write(struct drm_i915_private *dev_priv,
+ u32 reg, u32 val)
+{
+ if (dev_priv->info->gen >= 6)
+ __gen6_gt_wait_for_fifo(dev_priv);
+ I915_WRITE(reg, val);
+}
+
static inline void
i915_write(struct drm_i915_private *dev_priv, u32 reg, u64 val, int len)
{
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cf4f74c..36e66cc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1398,7 +1398,7 @@
* Return the required GTT alignment for an object, only taking into account
* unfenced tiled surface requirements.
*/
-static uint32_t
+uint32_t
i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index d2f445e..50ab161 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -772,8 +772,8 @@
if (from == NULL || to == from)
return 0;
- /* XXX gpu semaphores are currently causing hard hangs on SNB mobile */
- if (INTEL_INFO(obj->base.dev)->gen < 6 || IS_MOBILE(obj->base.dev))
+ /* XXX gpu semaphores are implicated in various hard hangs on SNB */
+ if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores)
return i915_gem_object_wait_rendering(obj, true);
idx = intel_ring_sync_index(from, to);
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 22a32b9..d64843e 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -349,14 +349,27 @@
(obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end &&
i915_gem_object_fence_ok(obj, args->tiling_mode));
- obj->tiling_changed = true;
- obj->tiling_mode = args->tiling_mode;
- obj->stride = args->stride;
+ /* Rebind if we need a change of alignment */
+ if (!obj->map_and_fenceable) {
+ u32 unfenced_alignment =
+ i915_gem_get_unfenced_gtt_alignment(obj);
+ if (obj->gtt_offset & (unfenced_alignment - 1))
+ ret = i915_gem_object_unbind(obj);
+ }
+
+ if (ret == 0) {
+ obj->tiling_changed = true;
+ obj->tiling_mode = args->tiling_mode;
+ obj->stride = args->stride;
+ }
}
+ /* we have to maintain this existing ABI... */
+ args->stride = obj->stride;
+ args->tiling_mode = obj->tiling_mode;
drm_gem_object_unreference(&obj->base);
mutex_unlock(&dev->struct_mutex);
- return 0;
+ return ret;
}
/**
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 97f946dc..8a9e08b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -316,6 +316,8 @@
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
+ DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
if (encoder->hot_plug)
encoder->hot_plug(encoder);
@@ -1649,9 +1651,7 @@
} else {
hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
- hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
- I915_WRITE(FDI_RXA_IMR, 0);
- I915_WRITE(FDI_RXB_IMR, 0);
+ hotplug_mask |= SDE_AUX_MASK;
}
dev_priv->pch_irq_mask = ~hotplug_mask;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15d94c6..3e6f486 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,17 +1553,7 @@
/* Backlight control */
#define BLC_PWM_CTL 0x61254
-#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BLC_PWM_CTL2 0x61250 /* 965+ only */
-#define BLM_COMBINATION_MODE (1 << 30)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
-#define BLM_LEGACY_MODE (1 << 16)
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
@@ -3271,6 +3261,8 @@
#define FORCEWAKE 0xA18C
#define FORCEWAKE_ACK 0x130090
+#define GT_FIFO_FREE_ENTRIES 0x120008
+
#define GEN6_RPNSWREQ 0xA008
#define GEN6_TURBO_DISABLE (1<<31)
#define GEN6_FREQUENCY(x) ((x)<<25)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3b00653..49fb54f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1219,7 +1219,7 @@
u32 blt_ecoskpd;
/* Make sure blitter notifies FBC of writes */
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
GEN6_BLITTER_LOCK_SHIFT;
@@ -1230,7 +1230,7 @@
GEN6_BLITTER_LOCK_SHIFT);
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
POSTING_READ(GEN6_BLITTER_ECOSKPD);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
}
static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
@@ -1630,19 +1630,19 @@
struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
wait_event(dev_priv->pending_flip_queue,
+ atomic_read(&dev_priv->mm.wedged) ||
atomic_read(&obj->pending_flip) == 0);
/* Big Hammer, we also need to ensure that any pending
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
* current scanout is retired before unpinning the old
* framebuffer.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
*/
ret = i915_gem_object_flush_gpu(obj, false);
- if (ret) {
- i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
- mutex_unlock(&dev->struct_mutex);
- return ret;
- }
+ (void) ret;
}
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
@@ -2045,6 +2045,31 @@
atomic_read(&obj->pending_flip) == 0);
}
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+
+ /*
+ * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+ * must be driven by its own crtc; no sharing is possible.
+ */
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_EDP:
+ if (!intel_encoder_is_pch_edp(&encoder->base))
+ return false;
+ continue;
+ }
+ }
+
+ return true;
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -2053,6 +2078,7 @@
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 reg, temp;
+ bool is_pch_port = false;
if (intel_crtc->active)
return;
@@ -2066,7 +2092,56 @@
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
}
- ironlake_fdi_enable(crtc);
+ is_pch_port = intel_crtc_driving_pch(crtc);
+
+ if (is_pch_port)
+ ironlake_fdi_enable(crtc);
+ else {
+ /* disable CPU FDI tx and PCH FDI rx */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+ POSTING_READ(reg);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(0x7 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ /* Ironlake workaround, disable clock pointer after downing FDI */
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+ /* still set train pattern 1 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ /* BPC in FDI rx is consistent with that in PIPECONF */
+ temp &= ~(0x07 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(100);
+ }
/* Enable panel fitting for LVDS */
if (dev_priv->pch_pf_size &&
@@ -2100,6 +2175,10 @@
intel_flush_display_plane(dev, plane);
}
+ /* Skip the PCH stuff if possible */
+ if (!is_pch_port)
+ goto done;
+
/* For PCH output, training FDI link */
if (IS_GEN6(dev))
gen6_fdi_link_train(crtc);
@@ -2184,7 +2263,7 @@
I915_WRITE(reg, temp | TRANS_ENABLE);
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
intel_crtc_update_cursor(crtc, true);
@@ -6203,7 +6282,7 @@
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
@@ -6301,7 +6380,7 @@
/* enable all PM interrupts */
I915_WRITE(GEN6_PMINTRMSK, 0);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
}
void intel_enable_clock_gating(struct drm_device *dev)
@@ -6496,7 +6575,7 @@
POSTING_READ(RSTDBYCTL);
}
- ironlake_disable_rc6(dev);
+ ironlake_teardown_rc6(dev);
}
static int ironlake_setup_rc6(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index c65992d..d860abe 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -30,8 +30,6 @@
#include "intel_drv.h"
-#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
-
void
intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode)
@@ -112,19 +110,6 @@
dev_priv->pch_pf_size = (width << 16) | height;
}
-static int is_backlight_combination_mode(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (INTEL_INFO(dev)->gen >= 4)
- return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
-
- if (IS_GEN2(dev))
- return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
-
- return 0;
-}
-
static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
{
u32 val;
@@ -181,9 +166,6 @@
if (INTEL_INFO(dev)->gen < 4)
max &= ~1;
}
-
- if (is_backlight_combination_mode(dev))
- max *= 0xff;
}
DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
@@ -201,15 +183,6 @@
val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (IS_PINEVIEW(dev))
val >>= 1;
-
- if (is_backlight_combination_mode(dev)){
- u8 lbpc;
-
- val &= ~1;
- pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
- val *= lbpc;
- val >>= 1;
- }
}
DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
@@ -232,16 +205,6 @@
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);
-
- if (is_backlight_combination_mode(dev)){
- u32 max = intel_panel_get_max_backlight(dev);
- u8 lpbc;
-
- lpbc = level * 0xfe / max + 1;
- level /= lpbc;
- pci_write_config_byte(dev->pdev, PCI_LBPC, lpbc);
- }
-
tmp = I915_READ(BLC_PWM_CTL);
if (IS_PINEVIEW(dev)) {
tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 6d6fde8..3430686 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -14,22 +14,23 @@
struct drm_i915_gem_object *obj;
};
-#define I915_RING_READ(reg) i915_safe_read(dev_priv, reg)
+#define I915_RING_READ(reg) i915_gt_read(dev_priv, reg)
+#define I915_RING_WRITE(reg, val) i915_gt_write(dev_priv, reg, val)
#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL((ring)->mmio_base))
-#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)
+#define I915_WRITE_TAIL(ring, val) I915_RING_WRITE(RING_TAIL((ring)->mmio_base), val)
#define I915_READ_START(ring) I915_RING_READ(RING_START((ring)->mmio_base))
-#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)
+#define I915_WRITE_START(ring, val) I915_RING_WRITE(RING_START((ring)->mmio_base), val)
#define I915_READ_HEAD(ring) I915_RING_READ(RING_HEAD((ring)->mmio_base))
-#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)
+#define I915_WRITE_HEAD(ring, val) I915_RING_WRITE(RING_HEAD((ring)->mmio_base), val)
#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL((ring)->mmio_base))
-#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)
+#define I915_WRITE_CTL(ring, val) I915_RING_WRITE(RING_CTL((ring)->mmio_base), val)
-#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_IMR(ring) I915_RING_READ(RING_IMR((ring)->mmio_base))
+#define I915_WRITE_IMR(ring, val) I915_RING_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID((ring)->mmio_base))
#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0((ring)->mmio_base))
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 49e5e99..6bdab89 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -6228,7 +6228,7 @@
entry->tvconf.has_component_output = false;
break;
case OUTPUT_LVDS:
- if ((conn & 0x00003f00) != 0x10)
+ if ((conn & 0x00003f00) >> 8 != 0x10)
entry->lvdsconf.use_straps_for_mode = true;
entry->lvdsconf.use_power_scripts = true;
break;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index a7fae26..a521840 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -49,7 +49,10 @@
DRM_ERROR("bo %p still attached to GEM object\n", bo);
nv10_mem_put_tile_region(dev, nvbo->tile, NULL);
- nouveau_vm_put(&nvbo->vma);
+ if (nvbo->vma.node) {
+ nouveau_vm_unmap(&nvbo->vma);
+ nouveau_vm_put(&nvbo->vma);
+ }
kfree(nvbo);
}
@@ -128,6 +131,7 @@
}
}
+ nvbo->bo.mem.num_pages = size >> PAGE_SHIFT;
nouveau_bo_placement_set(nvbo, flags, 0);
nvbo->channel = chan;
@@ -166,17 +170,17 @@
set_placement_range(struct nouveau_bo *nvbo, uint32_t type)
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
+ int vram_pages = dev_priv->vram_size >> PAGE_SHIFT;
if (dev_priv->card_type == NV_10 &&
- nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM)) {
+ nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
+ nvbo->bo.mem.num_pages < vram_pages / 2) {
/*
* Make sure that the color and depth buffers are handled
* by independent memory controller units. Up to a 9x
* speed up when alpha-blending and depth-test are enabled
* at the same time.
*/
- int vram_pages = dev_priv->vram_size >> PAGE_SHIFT;
-
if (nvbo->tile_flags & NOUVEAU_GEM_TILE_ZETA) {
nvbo->placement.fpfn = vram_pages / 2;
nvbo->placement.lpfn = ~0;
@@ -785,7 +789,7 @@
if (ret)
goto out;
- ret = ttm_bo_move_ttm(bo, evict, no_wait_reserve, no_wait_gpu, new_mem);
+ ret = ttm_bo_move_ttm(bo, true, no_wait_reserve, no_wait_gpu, new_mem);
out:
ttm_bo_mem_put(bo, &tmp_mem);
return ret;
@@ -811,11 +815,11 @@
if (ret)
return ret;
- ret = ttm_bo_move_ttm(bo, evict, no_wait_reserve, no_wait_gpu, &tmp_mem);
+ ret = ttm_bo_move_ttm(bo, true, no_wait_reserve, no_wait_gpu, &tmp_mem);
if (ret)
goto out;
- ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait_reserve, no_wait_gpu, new_mem);
+ ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait_reserve, no_wait_gpu, new_mem);
if (ret)
goto out;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index a21e000..390d82c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -507,6 +507,7 @@
int high_w = 0, high_h = 0, high_v = 0;
list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
+ mode->vrefresh = drm_mode_vrefresh(mode);
if (helper->mode_valid(connector, mode) != MODE_OK ||
(mode->flags & DRM_MODE_FLAG_INTERLACE))
continue;
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c
index 65699bf..b368ed7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.c
@@ -83,7 +83,8 @@
return ret;
/* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */
- ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy);
+ ret = nouveau_notifier_alloc(chan, NvNotify0, 32, 0xfd0, 0x1000,
+ &chan->m2mf_ntfy);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 9821fca..982d70b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -852,7 +852,8 @@
extern int nouveau_notifier_init_channel(struct nouveau_channel *);
extern void nouveau_notifier_takedown_channel(struct nouveau_channel *);
extern int nouveau_notifier_alloc(struct nouveau_channel *, uint32_t handle,
- int cout, uint32_t *offset);
+ int cout, uint32_t start, uint32_t end,
+ uint32_t *offset);
extern int nouveau_notifier_offset(struct nouveau_gpuobj *, uint32_t *);
extern int nouveau_ioctl_notifier_alloc(struct drm_device *, void *data,
struct drm_file *);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 26347b7..b0fb9bd 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -725,8 +725,10 @@
ret = vram->get(dev, mem->num_pages << PAGE_SHIFT,
mem->page_alignment << PAGE_SHIFT, size_nc,
(nvbo->tile_flags >> 8) & 0xff, &node);
- if (ret)
- return ret;
+ if (ret) {
+ mem->mm_node = NULL;
+ return (ret == -ENOSPC) ? 0 : ret;
+ }
node->page_shift = 12;
if (nvbo->vma.node)
diff --git a/drivers/gpu/drm/nouveau/nouveau_mm.c b/drivers/gpu/drm/nouveau/nouveau_mm.c
index 8844b50..7609756 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mm.c
@@ -123,7 +123,7 @@
return 0;
}
- return -ENOMEM;
+ return -ENOSPC;
}
int
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index fe29d60..5ea1676 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -96,7 +96,8 @@
int
nouveau_notifier_alloc(struct nouveau_channel *chan, uint32_t handle,
- int size, uint32_t *b_offset)
+ int size, uint32_t start, uint32_t end,
+ uint32_t *b_offset)
{
struct drm_device *dev = chan->dev;
struct nouveau_gpuobj *nobj = NULL;
@@ -104,9 +105,10 @@
uint32_t offset;
int target, ret;
- mem = drm_mm_search_free(&chan->notifier_heap, size, 0, 0);
+ mem = drm_mm_search_free_in_range(&chan->notifier_heap, size, 0,
+ start, end, 0);
if (mem)
- mem = drm_mm_get_block(mem, size, 0);
+ mem = drm_mm_get_block_range(mem, size, 0, start, end);
if (!mem) {
NV_ERROR(dev, "Channel %d notifier block full\n", chan->id);
return -ENOMEM;
@@ -177,7 +179,8 @@
if (IS_ERR(chan))
return PTR_ERR(chan);
- ret = nouveau_notifier_alloc(chan, na->handle, na->size, &na->offset);
+ ret = nouveau_notifier_alloc(chan, na->handle, na->size, 0, 0x1000,
+ &na->offset);
nouveau_channel_put(&chan);
return ret;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index f05c0cd..4399e2f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -543,7 +543,7 @@
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
struct nouveau_pm_level *perflvl;
- if (pm->cur == &pm->boot)
+ if (!pm->cur || pm->cur == &pm->boot)
return;
perflvl = pm->cur;
diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index ef23550..c82db37 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -342,8 +342,8 @@
if (nv_encoder->dcb->type == OUTPUT_LVDS) {
bool duallink, dummy;
- nouveau_bios_parse_lvds_table(dev, nv_connector->native_mode->
- clock, &duallink, &dummy);
+ nouveau_bios_parse_lvds_table(dev, output_mode->clock,
+ &duallink, &dummy);
if (duallink)
regp->fp_control |= (8 << 28);
} else
@@ -518,8 +518,6 @@
return;
if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
- struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
-
/* when removing an output, crtc may not be set, but PANEL_OFF
* must still be run
*/
@@ -527,12 +525,8 @@
nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
if (mode == DRM_MODE_DPMS_ON) {
- if (!nv_connector->native_mode) {
- NV_ERROR(dev, "Not turning on LVDS without native mode\n");
- return;
- }
call_lvds_script(dev, nv_encoder->dcb, head,
- LVDS_PANEL_ON, nv_connector->native_mode->clock);
+ LVDS_PANEL_ON, nv_encoder->mode.clock);
} else
/* pxclk of 0 is fine for PANEL_OFF, and for a
* disconnected LVDS encoder there is no native_mode
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 8870d72..18d30c2 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -211,30 +211,35 @@
struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i];
switch (dev_priv->chipset) {
- case 0x44:
- case 0x4a:
+ case 0x40:
+ case 0x41: /* guess */
+ case 0x42:
+ case 0x43:
+ case 0x45: /* guess */
case 0x4e:
nv_wr32(dev, NV20_PGRAPH_TSIZE(i), tile->pitch);
nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), tile->limit);
nv_wr32(dev, NV20_PGRAPH_TILE(i), tile->addr);
- break;
-
- case 0x46:
- case 0x47:
- case 0x49:
- case 0x4b:
- nv_wr32(dev, NV47_PGRAPH_TSIZE(i), tile->pitch);
- nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), tile->limit);
- nv_wr32(dev, NV47_PGRAPH_TILE(i), tile->addr);
nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tile->pitch);
nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tile->limit);
nv_wr32(dev, NV40_PGRAPH_TILE1(i), tile->addr);
break;
-
- default:
+ case 0x44:
+ case 0x4a:
nv_wr32(dev, NV20_PGRAPH_TSIZE(i), tile->pitch);
nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), tile->limit);
nv_wr32(dev, NV20_PGRAPH_TILE(i), tile->addr);
+ break;
+ case 0x46:
+ case 0x47:
+ case 0x49:
+ case 0x4b:
+ case 0x4c:
+ case 0x67:
+ default:
+ nv_wr32(dev, NV47_PGRAPH_TSIZE(i), tile->pitch);
+ nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), tile->limit);
+ nv_wr32(dev, NV47_PGRAPH_TILE(i), tile->addr);
nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tile->pitch);
nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tile->limit);
nv_wr32(dev, NV40_PGRAPH_TILE1(i), tile->addr);
@@ -396,17 +401,20 @@
break;
default:
switch (dev_priv->chipset) {
- case 0x46:
- case 0x47:
- case 0x49:
- case 0x4b:
- nv_wr32(dev, 0x400DF0, nv_rd32(dev, NV04_PFB_CFG0));
- nv_wr32(dev, 0x400DF4, nv_rd32(dev, NV04_PFB_CFG1));
- break;
- default:
+ case 0x41:
+ case 0x42:
+ case 0x43:
+ case 0x45:
+ case 0x4e:
+ case 0x44:
+ case 0x4a:
nv_wr32(dev, 0x4009F0, nv_rd32(dev, NV04_PFB_CFG0));
nv_wr32(dev, 0x4009F4, nv_rd32(dev, NV04_PFB_CFG1));
break;
+ default:
+ nv_wr32(dev, 0x400DF0, nv_rd32(dev, NV04_PFB_CFG0));
+ nv_wr32(dev, 0x400DF4, nv_rd32(dev, NV04_PFB_CFG1));
+ break;
}
nv_wr32(dev, 0x4069F0, nv_rd32(dev, NV04_PFB_CFG0));
nv_wr32(dev, 0x4069F4, nv_rd32(dev, NV04_PFB_CFG1));
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index ea00418..e57caa2 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -403,16 +403,24 @@
void
nv50_instmem_flush(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x00330c, 0x00000001);
if (!nv_wait(dev, 0x00330c, 0x00000002, 0x00000000))
NV_ERROR(dev, "PRAMIN flush timeout\n");
+ spin_unlock(&dev_priv->ramin_lock);
}
void
nv84_instmem_flush(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x070000, 0x00000001);
if (!nv_wait(dev, 0x070000, 0x00000002, 0x00000000))
NV_ERROR(dev, "PRAMIN flush timeout\n");
+ spin_unlock(&dev_priv->ramin_lock);
}
diff --git a/drivers/gpu/drm/nouveau/nv50_vm.c b/drivers/gpu/drm/nouveau/nv50_vm.c
index 459ff08..6144156 100644
--- a/drivers/gpu/drm/nouveau/nv50_vm.c
+++ b/drivers/gpu/drm/nouveau/nv50_vm.c
@@ -169,7 +169,11 @@
void
nv50_vm_flush_engine(struct drm_device *dev, int engine)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x100c80, (engine << 16) | 1);
if (!nv_wait(dev, 0x100c80, 0x00000001, 0x00000000))
NV_ERROR(dev, "vm flush timeout: engine %d\n", engine);
+ spin_unlock(&dev_priv->ramin_lock);
}
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 095bc50..a4e5e53 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -557,9 +557,9 @@
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (ss_enabled) {
if (ss->refdiv) {
+ pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
pll->flags |= RADEON_PLL_USE_REF_DIV;
pll->reference_div = ss->refdiv;
if (ASIC_IS_AVIVO(rdev))
@@ -662,10 +662,12 @@
index, (uint32_t *)&args);
adjusted_clock = le32_to_cpu(args.v3.sOutput.ulDispPllFreq) * 10;
if (args.v3.sOutput.ucRefDiv) {
+ pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;
pll->flags |= RADEON_PLL_USE_REF_DIV;
pll->reference_div = args.v3.sOutput.ucRefDiv;
}
if (args.v3.sOutput.ucPostDiv) {
+ pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV;
pll->flags |= RADEON_PLL_USE_POST_DIV;
pll->post_div = args.v3.sOutput.ucPostDiv;
}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 56deae5..93fa735 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3490,7 +3490,7 @@
track->num_texture = 16;
track->maxy = 4096;
track->separate_cube = 0;
- track->aaresolve = true;
+ track->aaresolve = false;
track->aa.robj = NULL;
}
@@ -3801,8 +3801,6 @@
r100_mc_program(rdev);
/* Resume clock */
r100_clock_startup(rdev);
- /* Initialize GPU configuration (# pipes, ...) */
-// r100_gpu_init(rdev);
/* Initialize GART (initialize after TTM so we can allocate
* memory through TTM but finalize after TTM) */
r100_enable_bm(rdev);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 768c60e..069efa8 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -910,6 +910,7 @@
track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_X16:
+ case R300_TX_FORMAT_FL_I16:
case R300_TX_FORMAT_Y8X8:
case R300_TX_FORMAT_Z5Y6X5:
case R300_TX_FORMAT_Z6Y5X5:
@@ -922,6 +923,7 @@
track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_Y16X16:
+ case R300_TX_FORMAT_FL_I16A16:
case R300_TX_FORMAT_Z11Y11X10:
case R300_TX_FORMAT_Z10Y11X11:
case R300_TX_FORMAT_W8Z8Y8X8:
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0e65709..3e7e7f9 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -971,7 +971,7 @@
max_fractional_feed_div = pll->max_frac_feedback_div;
}
- for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
+ for (post_div = max_post_div; post_div >= min_post_div; --post_div) {
uint32_t ref_div;
if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 66324b5..cc44bdf 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -113,11 +113,14 @@
u32 tiling_flags = 0;
int ret;
int aligned_size, size;
+ int height = mode_cmd->height;
/* need to align pitch with crtc limits */
mode_cmd->pitch = radeon_align_pitch(rdev, mode_cmd->width, mode_cmd->bpp, fb_tiled) * ((mode_cmd->bpp + 1) / 8);
- size = mode_cmd->pitch * mode_cmd->height;
+ if (rdev->family >= CHIP_R600)
+ height = ALIGN(mode_cmd->height, 8);
+ size = mode_cmd->pitch * height;
aligned_size = ALIGN(size, PAGE_SIZE);
ret = radeon_gem_object_create(rdev, aligned_size, 0,
RADEON_GEM_DOMAIN_VRAM,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484..297bc9a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@
will be called k8temp.
config SENSORS_K10TEMP
- tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ tristate "AMD Family 10h/11h/12h/14h temperature sensor"
depends on X86 && PCI
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
- the AMD Family 10h and all revisions of the AMD Family 11h
- microarchitectures.
+ the AMD Family 10h and all revisions of the AMD Family 11h,
+ 12h (Llano), and 14h (Brazos) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
@@ -455,13 +455,14 @@
called jz4740-hwmon.
config SENSORS_JC42
- tristate "JEDEC JC42.4 compliant temperature sensors"
+ tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
help
- If you say yes here you get support for Jedec JC42.4 compliant
- temperature sensors. Support will include, but not be limited to,
- ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
- MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+ If you say yes here, you get support for JEDEC JC42.4 compliant
+ temperature sensors, which are used on many DDR3 memory modules for
+ mobile devices and servers. Support will include, but not be limited
+ to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+ MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -574,7 +575,7 @@
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
- EMC6D101 and EMC6D102.
+ EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
will be called lm85.
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 86d822a..d46c0c7 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -242,6 +242,7 @@
{ "ad7414", 0 },
{}
};
+MODULE_DEVICE_TABLE(i2c, ad7414_id);
static struct i2c_driver ad7414_driver = {
.driver = {
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index f13c843..5cc3e37 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -334,6 +334,7 @@
{ "adt7411", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, adt7411_id);
static struct i2c_driver adt7411_driver = {
.driver = {
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78..9349912 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@
/* Configuration register defines */
#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
#define JC42_CFG_SHUTDOWN (1 << 8)
#define JC42_CFG_HYST_SHIFT 9
#define JC42_CFG_HYST_MASK 0x03
@@ -332,7 +334,7 @@
{
struct i2c_client *client = to_i2c_client(dev);
struct jc42_data *data = i2c_get_clientdata(client);
- long val;
+ unsigned long val;
int diff, hyst;
int err;
int ret = count;
@@ -380,14 +382,14 @@
static DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
show_temp_crit_hyst, set_temp_crit_hyst);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@
NULL
};
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct jc42_data *data = i2c_get_clientdata(client);
+ unsigned int config = data->config;
+ bool readonly;
+
+ if (attr == &dev_attr_temp1_crit.attr)
+ readonly = config & JC42_CFG_TCRIT_LOCK;
+ else if (attr == &dev_attr_temp1_min.attr ||
+ attr == &dev_attr_temp1_max.attr)
+ readonly = config & JC42_CFG_EVENT_LOCK;
+ else if (attr == &dev_attr_temp1_crit_hyst.attr)
+ readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+ else
+ readonly = true;
+
+ return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
static const struct attribute_group jc42_group = {
.attrs = jc42_attributes,
+ .is_visible = jc42_attribute_mode,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a240..82bf65a 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
/*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*
@@ -25,7 +25,7 @@
#include <linux/pci.h>
#include <asm/processor.h>
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
@@ -208,6 +208,7 @@
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e22984..d2cc286 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@
enum chips {
any_chip, lm85b, lm85c,
adm1027, adt7463, adt7468,
- emc6d100, emc6d102
+ emc6d100, emc6d102, emc6d103
};
/* The LM85 registers */
@@ -90,6 +90,9 @@
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
#define LM85_VERSTEP_EMC6D102 0x65
+#define LM85_VERSTEP_EMC6D103_A0 0x68
+#define LM85_VERSTEP_EMC6D103_A1 0x69
+#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
#define LM85_REG_CONFIG 0x40
@@ -348,6 +351,7 @@
{ "emc6d100", emc6d100 },
{ "emc6d101", emc6d100 },
{ "emc6d102", emc6d102 },
+ { "emc6d103", emc6d103 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@
case LM85_VERSTEP_EMC6D102:
type_name = "emc6d102";
break;
+ case LM85_VERSTEP_EMC6D103_A0:
+ case LM85_VERSTEP_EMC6D103_A1:
+ type_name = "emc6d103";
+ break;
+ /*
+ * Registers apparently missing in EMC6D103S/EMC6D103:A2
+ * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+ * (according to the data sheets), but used unconditionally
+ * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+ * So skip EMC6D103S for now.
+ case LM85_VERSTEP_EMC6D103S:
+ type_name = "emc6d103s";
+ break;
+ */
}
} else {
dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@
case adt7468:
case emc6d100:
case emc6d102:
+ case emc6d103:
data->freq_map = adm1027_freq_map;
break;
default:
@@ -1468,7 +1487,7 @@
/* More alarm bits */
data->alarms |= lm85_read_value(client,
EMC6D100_REG_ALARM3) << 16;
- } else if (data->type == emc6d102) {
+ } else if (data->type == emc6d102 || data->type == emc6d103) {
/* Have to read LSB bits after the MSB ones because
the reading of the MSB bits has frozen the
LSBs (backward from the ADM1027).
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b605ff3..829a2a1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -847,11 +847,15 @@
dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
}
+ /*
+ * ProDB0017052: Clear ARDY bit twice
+ */
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
OMAP_I2C_STAT_AL)) {
omap_i2c_ack_stat(dev, stat &
(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
- OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
+ OMAP_I2C_STAT_ARDY));
omap_i2c_complete_cmd(dev, err);
return IRQ_HANDLED;
}
@@ -1137,12 +1141,41 @@
return 0;
}
+#ifdef CONFIG_SUSPEND
+static int omap_i2c_suspend(struct device *dev)
+{
+ if (!pm_runtime_suspended(dev))
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+ dev->bus->pm->runtime_suspend(dev);
+
+ return 0;
+}
+
+static int omap_i2c_resume(struct device *dev)
+{
+ if (!pm_runtime_suspended(dev))
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+ dev->bus->pm->runtime_resume(dev);
+
+ return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+ .suspend = omap_i2c_suspend,
+ .resume = omap_i2c_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
+ .pm = OMAP_I2C_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 495be45..266135d 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -942,7 +942,7 @@
adap->owner = THIS_MODULE;
/* DDC class but actually often used for more generic I2C */
adap->class = I2C_CLASS_DDC;
- strncpy(adap->name, "ST Microelectronics DDC I2C adapter",
+ strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
sizeof(adap->name));
adap->nr = bus_nr;
adap->algo = &stu300_algo;
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 1fa091e..4a5c4a4 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -62,6 +62,7 @@
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <asm/mwait.h>
+#include <asm/msr.h>
#define INTEL_IDLE_VERSION "0.4"
#define PREFIX "intel_idle: "
@@ -85,6 +86,12 @@
static struct cpuidle_state *cpuidle_state_table;
/*
+ * Hardware C-state auto-demotion may not always be optimal.
+ * Indicate which enable bits to clear here.
+ */
+static unsigned long long auto_demotion_disable_flags;
+
+/*
* Set this flag for states where the HW flushes the TLB for us
* and so we don't need cross-calls to keep it consistent.
* If this flag is set, SW flushes the TLB, so even if the
@@ -281,6 +288,15 @@
.notifier_call = setup_broadcast_cpuhp_notify,
};
+static void auto_demotion_disable(void *dummy)
+{
+ unsigned long long msr_bits;
+
+ rdmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
+ msr_bits &= ~auto_demotion_disable_flags;
+ wrmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
+}
+
/*
* intel_idle_probe()
*/
@@ -324,11 +340,17 @@
case 0x25: /* Westmere */
case 0x2C: /* Westmere */
cpuidle_state_table = nehalem_cstates;
+ auto_demotion_disable_flags =
+ (NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE);
break;
case 0x1C: /* 28 - Atom Processor */
+ cpuidle_state_table = atom_cstates;
+ break;
+
case 0x26: /* 38 - Lincroft Atom Processor */
cpuidle_state_table = atom_cstates;
+ auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE;
break;
case 0x2A: /* SNB */
@@ -436,6 +458,8 @@
return -EIO;
}
}
+ if (auto_demotion_disable_flags)
+ smp_call_function(auto_demotion_disable, NULL, 1);
return 0;
}
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 8b606fd..08c1948 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -2610,9 +2610,11 @@
netif_carrier_on(nesvnic->netdev);
spin_lock(&nesvnic->port_ibevent_lock);
- if (nesdev->iw_status == 0) {
- nesdev->iw_status = 1;
- nes_port_ibevent(nesvnic);
+ if (nesvnic->of_device_registered) {
+ if (nesdev->iw_status == 0) {
+ nesdev->iw_status = 1;
+ nes_port_ibevent(nesvnic);
+ }
}
spin_unlock(&nesvnic->port_ibevent_lock);
}
@@ -2642,9 +2644,11 @@
netif_carrier_off(nesvnic->netdev);
spin_lock(&nesvnic->port_ibevent_lock);
- if (nesdev->iw_status == 1) {
- nesdev->iw_status = 0;
- nes_port_ibevent(nesvnic);
+ if (nesvnic->of_device_registered) {
+ if (nesdev->iw_status == 1) {
+ nesdev->iw_status = 0;
+ nes_port_ibevent(nesvnic);
+ }
}
spin_unlock(&nesvnic->port_ibevent_lock);
}
@@ -2703,9 +2707,11 @@
netif_carrier_on(nesvnic->netdev);
spin_lock(&nesvnic->port_ibevent_lock);
- if (nesdev->iw_status == 0) {
- nesdev->iw_status = 1;
- nes_port_ibevent(nesvnic);
+ if (nesvnic->of_device_registered) {
+ if (nesdev->iw_status == 0) {
+ nesdev->iw_status = 1;
+ nes_port_ibevent(nesvnic);
+ }
}
spin_unlock(&nesvnic->port_ibevent_lock);
}
@@ -2723,9 +2729,11 @@
netif_carrier_off(nesvnic->netdev);
spin_lock(&nesvnic->port_ibevent_lock);
- if (nesdev->iw_status == 1) {
- nesdev->iw_status = 0;
- nes_port_ibevent(nesvnic);
+ if (nesvnic->of_device_registered) {
+ if (nesdev->iw_status == 1) {
+ nesdev->iw_status = 0;
+ nes_port_ibevent(nesvnic);
+ }
}
spin_unlock(&nesvnic->port_ibevent_lock);
}
diff --git a/drivers/infiniband/hw/qib/qib_rc.c b/drivers/infiniband/hw/qib/qib_rc.c
index 8245237..eca0c41 100644
--- a/drivers/infiniband/hw/qib/qib_rc.c
+++ b/drivers/infiniband/hw/qib/qib_rc.c
@@ -1005,7 +1005,8 @@
* there are still requests that haven't been acked.
*/
if ((psn & IB_BTH_REQ_ACK) && qp->s_acked != qp->s_tail &&
- !(qp->s_flags & (QIB_S_TIMER | QIB_S_WAIT_RNR | QIB_S_WAIT_PSN)))
+ !(qp->s_flags & (QIB_S_TIMER | QIB_S_WAIT_RNR | QIB_S_WAIT_PSN)) &&
+ (ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
start_timer(qp);
while (qp->s_last != qp->s_acked) {
@@ -1439,6 +1440,8 @@
}
spin_lock_irqsave(&qp->s_lock, flags);
+ if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
+ goto ack_done;
/* Ignore invalid responses. */
if (qib_cmp24(psn, qp->s_next_psn) >= 0)
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 23cf8fc..5b8f59d 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -360,7 +360,7 @@
event->owner = owner;
list_add_tail(&event->node, &gameport_event_list);
- schedule_work(&gameport_event_work);
+ queue_work(system_long_wq, &gameport_event_work);
out:
spin_unlock_irqrestore(&gameport_event_lock, flags);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index ac471b7..99ce903 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -71,8 +71,9 @@
spinlock_t lock;
unsigned int repoll_dly;
unsigned long cp_dly_jiffies;
+ bool use_fn_map;
const struct tegra_kbc_platform_data *pdata;
- unsigned short keycode[KBC_MAX_KEY];
+ unsigned short keycode[KBC_MAX_KEY * 2];
unsigned short current_keys[KBC_MAX_KPENT];
unsigned int num_pressed_keys;
struct timer_list timer;
@@ -178,6 +179,40 @@
KEY(15, 5, KEY_F2),
KEY(15, 6, KEY_CAPSLOCK),
KEY(15, 7, KEY_F6),
+
+ /* Software Handled Function Keys */
+ KEY(20, 0, KEY_KP7),
+
+ KEY(21, 0, KEY_KP9),
+ KEY(21, 1, KEY_KP8),
+ KEY(21, 2, KEY_KP4),
+ KEY(21, 4, KEY_KP1),
+
+ KEY(22, 1, KEY_KPSLASH),
+ KEY(22, 2, KEY_KP6),
+ KEY(22, 3, KEY_KP5),
+ KEY(22, 4, KEY_KP3),
+ KEY(22, 5, KEY_KP2),
+ KEY(22, 7, KEY_KP0),
+
+ KEY(27, 1, KEY_KPASTERISK),
+ KEY(27, 3, KEY_KPMINUS),
+ KEY(27, 4, KEY_KPPLUS),
+ KEY(27, 5, KEY_KPDOT),
+
+ KEY(28, 5, KEY_VOLUMEUP),
+
+ KEY(29, 3, KEY_HOME),
+ KEY(29, 4, KEY_END),
+ KEY(29, 5, KEY_BRIGHTNESSDOWN),
+ KEY(29, 6, KEY_VOLUMEDOWN),
+ KEY(29, 7, KEY_BRIGHTNESSUP),
+
+ KEY(30, 0, KEY_NUMLOCK),
+ KEY(30, 1, KEY_SCROLLLOCK),
+ KEY(30, 2, KEY_MUTE),
+
+ KEY(31, 4, KEY_HELP),
};
static const struct matrix_keymap_data tegra_kbc_default_keymap_data = {
@@ -224,6 +259,7 @@
unsigned int i;
unsigned int num_down = 0;
unsigned long flags;
+ bool fn_keypress = false;
spin_lock_irqsave(&kbc->lock, flags);
for (i = 0; i < KBC_MAX_KPENT; i++) {
@@ -237,11 +273,28 @@
MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);
scancodes[num_down] = scancode;
- keycodes[num_down++] = kbc->keycode[scancode];
+ keycodes[num_down] = kbc->keycode[scancode];
+ /* If driver uses Fn map, do not report the Fn key. */
+ if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
+ fn_keypress = true;
+ else
+ num_down++;
}
val >>= 8;
}
+
+ /*
+ * If the platform uses Fn keymaps, translate keys on a Fn keypress.
+ * Function keycodes are KBC_MAX_KEY apart from the plain keycodes.
+ */
+ if (fn_keypress) {
+ for (i = 0; i < num_down; i++) {
+ scancodes[i] += KBC_MAX_KEY;
+ keycodes[i] = kbc->keycode[scancodes[i]];
+ }
+ }
+
spin_unlock_irqrestore(&kbc->lock, flags);
tegra_kbc_report_released_keys(kbc->idev,
@@ -594,8 +647,11 @@
input_dev->keycode = kbc->keycode;
input_dev->keycodesize = sizeof(kbc->keycode[0]);
- input_dev->keycodemax = ARRAY_SIZE(kbc->keycode);
+ input_dev->keycodemax = KBC_MAX_KEY;
+ if (pdata->use_fn_map)
+ input_dev->keycodemax *= 2;
+ kbc->use_fn_map = pdata->use_fn_map;
keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
input_dev->keycode, input_dev->keybit);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 25e5d04..7453938 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,6 +51,29 @@
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
+
+/*
+ * The following describes response for the 0x0c query.
+ *
+ * byte mask name meaning
+ * ---- ---- ------- ------------
+ * 1 0x01 adjustable threshold capacitive button sensitivity
+ * can be adjusted
+ * 1 0x02 report max query 0x0d gives max coord reported
+ * 1 0x04 clearpad sensor is ClearPad product
+ * 1 0x08 advanced gesture not particularly meaningful
+ * 1 0x10 clickpad bit 0 1-button ClickPad
+ * 1 0x60 multifinger mode identifies firmware finger counting
+ * (not reporting!) algorithm.
+ * Not particularly meaningful
+ * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered
+ * 2 0x01 clickpad bit 1 2-button ClickPad
+ * 2 0x02 deluxe LED controls touchpad support LED commands
+ * ala multimedia control bar
+ * 2 0x04 reduced filtering firmware does less filtering on
+ * position data, driver should watch
+ * for noise.
+ */
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 7c38d1f..ba70058 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -299,7 +299,7 @@
event->owner = owner;
list_add_tail(&event->node, &serio_event_list);
- schedule_work(&serio_event_work);
+ queue_work(system_long_wq, &serio_event_work);
out:
spin_unlock_irqrestore(&serio_event_lock, flags);
diff --git a/drivers/isdn/hardware/eicon/istream.c b/drivers/isdn/hardware/eicon/istream.c
index 18f8798..7bd5baa 100644
--- a/drivers/isdn/hardware/eicon/istream.c
+++ b/drivers/isdn/hardware/eicon/istream.c
@@ -62,7 +62,7 @@
stream interface.
If synchronous service was requested, then function
does return amount of data written to stream.
- 'final' does indicate that pice of data to be written is
+ 'final' does indicate that piece of data to be written is
final part of frame (necessary only by structured datatransfer)
return 0 if zero lengh packet was written
return -1 if stream is full
diff --git a/drivers/isdn/hisax/isdnl2.c b/drivers/isdn/hisax/isdnl2.c
index 0858791..cfff0c4 100644
--- a/drivers/isdn/hisax/isdnl2.c
+++ b/drivers/isdn/hisax/isdnl2.c
@@ -1247,10 +1247,10 @@
l2_pull_iqueue(struct FsmInst *fi, int event, void *arg)
{
struct PStack *st = fi->userdata;
- struct sk_buff *skb, *oskb;
+ struct sk_buff *skb;
struct Layer2 *l2 = &st->l2;
u_char header[MAX_HEADER_LEN];
- int i;
+ int i, hdr_space_needed;
int unsigned p1;
u_long flags;
@@ -1261,6 +1261,16 @@
if (!skb)
return;
+ hdr_space_needed = l2headersize(l2, 0);
+ if (hdr_space_needed > skb_headroom(skb)) {
+ struct sk_buff *orig_skb = skb;
+
+ skb = skb_realloc_headroom(skb, hdr_space_needed);
+ if (!skb) {
+ dev_kfree_skb(orig_skb);
+ return;
+ }
+ }
spin_lock_irqsave(&l2->lock, flags);
if(test_bit(FLG_MOD128, &l2->flag))
p1 = (l2->vs - l2->va) % 128;
@@ -1285,19 +1295,7 @@
l2->vs = (l2->vs + 1) % 8;
}
spin_unlock_irqrestore(&l2->lock, flags);
- p1 = skb->data - skb->head;
- if (p1 >= i)
- memcpy(skb_push(skb, i), header, i);
- else {
- printk(KERN_WARNING
- "isdl2 pull_iqueue skb header(%d/%d) too short\n", i, p1);
- oskb = skb;
- skb = alloc_skb(oskb->len + i, GFP_ATOMIC);
- memcpy(skb_put(skb, i), header, i);
- skb_copy_from_linear_data(oskb,
- skb_put(skb, oskb->len), oskb->len);
- dev_kfree_skb(oskb);
- }
+ memcpy(skb_push(skb, i), header, i);
st->l2.l2l1(st, PH_PULL | INDICATION, skb);
test_and_clear_bit(FLG_ACK_PEND, &st->l2.flag);
if (!test_and_set_bit(FLG_T200_RUN, &st->l2.flag)) {
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 8a2f767..0ed7f6b 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -216,7 +216,6 @@
if (md_check_no_bitmap(mddev))
return -EINVAL;
- mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = linear_conf(mddev, mddev->raid_disks);
if (!conf)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 0cc30ec..818313e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -553,6 +553,9 @@
{
mddev_t *mddev, *new = NULL;
+ if (unit && MAJOR(unit) != MD_MAJOR)
+ unit &= ~((1<<MdpMinorShift)-1);
+
retry:
spin_lock(&all_mddevs_lock);
@@ -4138,10 +4141,10 @@
}
mddev->array_sectors = sectors;
- set_capacity(mddev->gendisk, mddev->array_sectors);
- if (mddev->pers)
+ if (mddev->pers) {
+ set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
-
+ }
return len;
}
@@ -4624,6 +4627,7 @@
}
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
+ mddev->changed = 1;
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
out:
return err;
@@ -4712,6 +4716,7 @@
mddev->sync_speed_min = mddev->sync_speed_max = 0;
mddev->recovery = 0;
mddev->in_sync = 0;
+ mddev->changed = 0;
mddev->degraded = 0;
mddev->safemode = 0;
mddev->bitmap_info.offset = 0;
@@ -4827,6 +4832,7 @@
set_capacity(disk, 0);
mutex_unlock(&mddev->open_mutex);
+ mddev->changed = 1;
revalidate_disk(disk);
if (mddev->ro)
@@ -6011,7 +6017,7 @@
atomic_inc(&mddev->openers);
mutex_unlock(&mddev->open_mutex);
- check_disk_size_change(mddev->gendisk, bdev);
+ check_disk_change(bdev);
out:
return err;
}
@@ -6026,6 +6032,21 @@
return 0;
}
+
+static int md_media_changed(struct gendisk *disk)
+{
+ mddev_t *mddev = disk->private_data;
+
+ return mddev->changed;
+}
+
+static int md_revalidate(struct gendisk *disk)
+{
+ mddev_t *mddev = disk->private_data;
+
+ mddev->changed = 0;
+ return 0;
+}
static const struct block_device_operations md_fops =
{
.owner = THIS_MODULE,
@@ -6036,6 +6057,8 @@
.compat_ioctl = md_compat_ioctl,
#endif
.getgeo = md_getgeo,
+ .media_changed = md_media_changed,
+ .revalidate_disk= md_revalidate,
};
static int md_thread(void * arg)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7e90b85..12215d4 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -274,6 +274,8 @@
atomic_t active; /* general refcount */
atomic_t openers; /* number of active opens */
+ int changed; /* True if we might need to
+ * reread partition info */
int degraded; /* whether md should consider
* adding a spare
*/
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 6d7ddf3..3a62d44 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -435,7 +435,6 @@
* bookkeeping area. [whatever we allocate in multipath_run(),
* should be freed in multipath_stop()]
*/
- mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL);
mddev->private = conf;
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 637a968..c0ac457 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -361,7 +361,6 @@
if (md_check_no_bitmap(mddev))
return -EINVAL;
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
- mddev->queue->queue_lock = &mddev->queue->__queue_lock;
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
@@ -670,6 +669,7 @@
mddev->new_layout = 0;
mddev->new_chunk_sectors = 128; /* by default set chunk size to 64k */
mddev->delta_disks = 1 - mddev->raid_disks;
+ mddev->raid_disks = 1;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a23ffa3..06cd712 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -593,7 +593,10 @@
if (conf->pending_bio_list.head) {
struct bio *bio;
bio = bio_list_get(&conf->pending_bio_list);
+ /* Only take the spinlock to quiet a warning */
+ spin_lock(conf->mddev->queue->queue_lock);
blk_remove_plug(conf->mddev->queue);
+ spin_unlock(conf->mddev->queue->queue_lock);
spin_unlock_irq(&conf->device_lock);
/* flush any pending bitmap writes to
* disk before proceeding w/ I/O */
@@ -959,7 +962,7 @@
atomic_inc(&r1_bio->remaining);
spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
- blk_plug_device(mddev->queue);
+ blk_plug_device_unlocked(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
}
r1_bio_write_done(r1_bio, bio->bi_vcnt, behind_pages, behind_pages != NULL);
@@ -2021,7 +2024,6 @@
if (IS_ERR(conf))
return PTR_ERR(conf);
- mddev->queue->queue_lock = &conf->device_lock;
list_for_each_entry(rdev, &mddev->disks, same_set) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 3b607b2..747d061 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -662,7 +662,10 @@
if (conf->pending_bio_list.head) {
struct bio *bio;
bio = bio_list_get(&conf->pending_bio_list);
+ /* Spinlock only taken to quiet a warning */
+ spin_lock(conf->mddev->queue->queue_lock);
blk_remove_plug(conf->mddev->queue);
+ spin_unlock(conf->mddev->queue->queue_lock);
spin_unlock_irq(&conf->device_lock);
/* flush any pending bitmap writes to disk
* before proceeding w/ I/O */
@@ -971,7 +974,7 @@
atomic_inc(&r10_bio->remaining);
spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
- blk_plug_device(mddev->queue);
+ blk_plug_device_unlocked(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
}
@@ -2304,8 +2307,6 @@
if (!conf)
goto out;
- mddev->queue->queue_lock = &conf->device_lock;
-
mddev->thread = conf->thread;
conf->thread = NULL;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7028128..78536fd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5204,7 +5204,6 @@
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- mddev->queue->queue_lock = &conf->device_lock;
mddev->queue->unplug_fn = raid5_unplug_queue;
chunk_size = mddev->chunk_sectors << 9;
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index e9a3eab..8c1d85e 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -621,7 +621,7 @@
{
int rc;
- workqueue = create_freezeable_workqueue("kmemstick");
+ workqueue = create_freezable_workqueue("kmemstick");
if (!workqueue)
return -ENOMEM;
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index f71f229..1735c84 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.17"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.17"
+#define MPT_LINUX_VERSION_COMMON "3.04.18"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.18"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index a3856ed..e8deb8e 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -597,6 +597,13 @@
}
static int
+mptctl_release(struct inode *inode, struct file *filep)
+{
+ fasync_helper(-1, filep, 0, &async_queue);
+ return 0;
+}
+
+static int
mptctl_fasync(int fd, struct file *filep, int mode)
{
MPT_ADAPTER *ioc;
@@ -2815,6 +2822,7 @@
.llseek = no_llseek,
.fasync = mptctl_fasync,
.unlocked_ioctl = mptctl_ioctl,
+ .release = mptctl_release,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_mpctl_ioctl,
#endif
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 59b8f53..0d9b82a 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1873,8 +1873,9 @@
}
out:
- printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
- ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
+ printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p) (sn=%ld)\n",
+ ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
+ SCpnt, SCpnt->serial_number);
return retval;
}
@@ -1911,7 +1912,7 @@
vdevice = SCpnt->device->hostdata;
if (!vdevice || !vdevice->vtarget) {
- retval = SUCCESS;
+ retval = 0;
goto out;
}
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 6a1f940..c45e630 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -143,9 +143,9 @@
unsigned long flags;
struct asic3 *asic;
- desc->chip->ack(irq);
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
- asic = desc->handler_data;
+ asic = get_irq_data(irq);
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
u32 status;
diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index 33c923d..fdd8a1b 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -118,12 +118,12 @@
/* Voice codec interface client */
cell = &davinci_vc->cells[DAVINCI_VC_VCIF_CELL];
- cell->name = "davinci_vcif";
+ cell->name = "davinci-vcif";
cell->driver_data = davinci_vc;
/* Voice codec CQ93VC client */
cell = &davinci_vc->cells[DAVINCI_VC_CQ93VC_CELL];
- cell->name = "cq93vc";
+ cell->name = "cq93vc-codec";
cell->driver_data = davinci_vc;
ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells,
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 627cf57..e9018d1 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -150,12 +150,12 @@
static inline int __tps6586x_writes(struct i2c_client *client, int reg,
int len, uint8_t *val)
{
- int ret;
+ int ret, i;
- ret = i2c_smbus_write_i2c_block_data(client, reg, len, val);
- if (ret < 0) {
- dev_err(&client->dev, "failed writings to 0x%02x\n", reg);
- return ret;
+ for (i = 0; i < len; i++) {
+ ret = __tps6586x_write(client, reg + i, *(val + i));
+ if (ret < 0)
+ return ret;
}
return 0;
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 000cb41..92b85e2 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -385,12 +385,18 @@
idev->close = ucb1x00_ts_close;
__set_bit(EV_ABS, idev->evbit);
- __set_bit(ABS_X, idev->absbit);
- __set_bit(ABS_Y, idev->absbit);
- __set_bit(ABS_PRESSURE, idev->absbit);
input_set_drvdata(idev, ts);
+ ucb1x00_adc_enable(ts->ucb);
+ ts->x_res = ucb1x00_ts_read_xres(ts);
+ ts->y_res = ucb1x00_ts_read_yres(ts);
+ ucb1x00_adc_disable(ts->ucb);
+
+ input_set_abs_params(idev, ABS_X, 0, ts->x_res, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, ts->y_res, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+
err = input_register_device(idev);
if (err)
goto fail;
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 41233c7..f4016a0 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -246,6 +246,16 @@
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
+ /* Don't actually go through with the suspend if the CODEC is
+ * still active (eg, for audio passthrough from CP. */
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & WM8994_VMID_SEL_MASK) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
@@ -261,6 +271,8 @@
if (ret < 0)
dev_err(dev, "Failed to save LDO registers: %d\n", ret);
+ wm8994->suspended = true;
+
ret = regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
@@ -276,6 +288,10 @@
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
+ /* We may have lied to the PM core about suspending */
+ if (!wm8994->suspended)
+ return 0;
+
ret = regulator_bulk_enable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
@@ -298,6 +314,8 @@
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+ wm8994->suspended = false;
+
return 0;
}
#endif
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 63ee4c1..b6e1c9a 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -449,6 +449,7 @@
{ "bmp085", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, bmp085_id);
static struct i2c_driver bmp085_driver = {
.driver = {
diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c
index 5f6852d..44d4475 100644
--- a/drivers/misc/tifm_core.c
+++ b/drivers/misc/tifm_core.c
@@ -329,7 +329,7 @@
{
int rc;
- workqueue = create_freezeable_workqueue("tifm");
+ workqueue = create_freezable_workqueue("tifm");
if (!workqueue)
return -ENOMEM;
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 4d2ea8e..6df5a55 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -785,7 +785,7 @@
if (x86_hyper != &x86_hyper_vmware)
return -ENODEV;
- vmballoon_wq = create_freezeable_workqueue("vmmemctl");
+ vmballoon_wq = create_freezable_workqueue("vmmemctl");
if (!vmballoon_wq) {
pr_err("failed to create workqueue\n");
return -ENOMEM;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 5c4a54d..ebc62ad 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -792,7 +792,6 @@
*/
mmc_release_host(host);
err = mmc_add_card(host->card);
- mmc_claim_host(host);
if (err)
goto remove_added;
@@ -805,12 +804,12 @@
goto remove_added;
}
+ mmc_claim_host(host);
return 0;
remove_added:
/* Remove without lock if the device has been added. */
- mmc_release_host(host);
mmc_sdio_remove(host);
mmc_claim_host(host);
remove:
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index d9d7efb..6322d1f 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -930,7 +930,7 @@
init_completion(&dev->dma_done);
- dev->card_workqueue = create_freezeable_workqueue(DRV_NAME);
+ dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
if (!dev->card_workqueue)
goto error9;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 67822cf..ac0d6a8 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1258,7 +1258,7 @@
static __init int sm_module_init(void)
{
int error = 0;
- cache_flush_workqueue = create_freezeable_workqueue("smflush");
+ cache_flush_workqueue = create_freezable_workqueue("smflush");
if (IS_ERR(cache_flush_workqueue))
return PTR_ERR(cache_flush_workqueue);
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 653c624..7897d11 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -22,7 +22,7 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.62.00-5"
+#define DRV_MODULE_VERSION "1.62.00-6"
#define DRV_MODULE_RELDATE "2011/01/30"
#define BNX2X_BC_VER 0x040200
@@ -1613,19 +1613,23 @@
#define BNX2X_BTR 4
#define MAX_SPQ_PENDING 8
-
-/* CMNG constants
- derived from lab experiments, and not from system spec calculations !!! */
-#define DEF_MIN_RATE 100
+/* CMNG constants, as derived from system spec calculations */
+/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */
+#define DEF_MIN_RATE 100
/* resolution of the rate shaping timer - 100 usec */
-#define RS_PERIODIC_TIMEOUT_USEC 100
-/* resolution of fairness algorithm in usecs -
- coefficient for calculating the actual t fair */
-#define T_FAIR_COEF 10000000
+#define RS_PERIODIC_TIMEOUT_USEC 100
/* number of bytes in single QM arbitration cycle -
- coefficient for calculating the fairness timer */
-#define QM_ARB_BYTES 40000
-#define FAIR_MEM 2
+ * coefficient for calculating the fairness timer */
+#define QM_ARB_BYTES 160000
+/* resolution of Min algorithm 1:100 */
+#define MIN_RES 100
+/* how many bytes above threshold for the minimal credit of Min algorithm*/
+#define MIN_ABOVE_THRESH 32768
+/* Fairness algorithm integration time coefficient -
+ * for calculating the actual Tfair */
+#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES)
+/* Memory of fairness algorithm . 2 cycles */
+#define FAIR_MEM 2
#define ATTN_NIG_FOR_FUNC (1L << 8)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 710ce5d..9379812 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -259,10 +259,44 @@
#endif
}
+/* Timestamp option length allowed for TPA aggregation:
+ *
+ * nop nop kind length echo val
+ */
+#define TPA_TSTAMP_OPT_LEN 12
+/**
+ * Calculate the approximate value of the MSS for this
+ * aggregation using the first packet of it.
+ *
+ * @param bp
+ * @param parsing_flags Parsing flags from the START CQE
+ * @param len_on_bd Total length of the first packet for the
+ * aggregation.
+ */
+static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
+ u16 len_on_bd)
+{
+ /* TPA arrgregation won't have an IP options and TCP options
+ * other than timestamp.
+ */
+ u16 hdrs_len = ETH_HLEN + sizeof(struct iphdr) + sizeof(struct tcphdr);
+
+
+ /* Check if there was a TCP timestamp, if there is it's will
+ * always be 12 bytes length: nop nop kind length echo val.
+ *
+ * Otherwise FW would close the aggregation.
+ */
+ if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
+ hdrs_len += TPA_TSTAMP_OPT_LEN;
+
+ return len_on_bd - hdrs_len;
+}
+
static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
struct sk_buff *skb,
struct eth_fast_path_rx_cqe *fp_cqe,
- u16 cqe_idx)
+ u16 cqe_idx, u16 parsing_flags)
{
struct sw_rx_page *rx_pg, old_rx_pg;
u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
@@ -275,8 +309,8 @@
/* This is needed in order to enable forwarding support */
if (frag_size)
- skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
- max(frag_size, (u32)len_on_bd));
+ skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp, parsing_flags,
+ len_on_bd);
#ifdef BNX2X_STOP_ON_ERROR
if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) {
@@ -344,6 +378,8 @@
if (likely(new_skb)) {
/* fix ip xsum and give it to the stack */
/* (no need to map the new skb) */
+ u16 parsing_flags =
+ le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags);
prefetch(skb);
prefetch(((char *)(skb)) + L1_CACHE_BYTES);
@@ -373,9 +409,9 @@
}
if (!bnx2x_fill_frag_skb(bp, fp, skb,
- &cqe->fast_path_cqe, cqe_idx)) {
- if ((le16_to_cpu(cqe->fast_path_cqe.
- pars_flags.flags) & PARSING_FLAGS_VLAN))
+ &cqe->fast_path_cqe, cqe_idx,
+ parsing_flags)) {
+ if (parsing_flags & PARSING_FLAGS_VLAN)
__vlan_hwaccel_put_tag(skb,
le16_to_cpu(cqe->fast_path_cqe.
vlan_tag));
@@ -703,19 +739,20 @@
{
u16 line_speed = bp->link_vars.line_speed;
if (IS_MF(bp)) {
- u16 maxCfg = (bp->mf_config[BP_VN(bp)] &
- FUNC_MF_CFG_MAX_BW_MASK) >>
- FUNC_MF_CFG_MAX_BW_SHIFT;
- /* Calculate the current MAX line speed limit for the DCC
- * capable devices
+ u16 maxCfg = bnx2x_extract_max_cfg(bp,
+ bp->mf_config[BP_VN(bp)]);
+
+ /* Calculate the current MAX line speed limit for the MF
+ * devices
*/
- if (IS_MF_SD(bp)) {
+ if (IS_MF_SI(bp))
+ line_speed = (line_speed * maxCfg) / 100;
+ else { /* SD mode */
u16 vn_max_rate = maxCfg * 100;
if (vn_max_rate < line_speed)
line_speed = vn_max_rate;
- } else /* IS_MF_SI(bp)) */
- line_speed = (line_speed * maxCfg) / 100;
+ }
}
return line_speed;
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 03eb4d6..326ba44 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1044,4 +1044,24 @@
void bnx2x_acquire_phy_lock(struct bnx2x *bp);
void bnx2x_release_phy_lock(struct bnx2x *bp);
+/**
+ * Extracts MAX BW part from MF configuration.
+ *
+ * @param bp
+ * @param mf_cfg
+ *
+ * @return u16
+ */
+static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
+{
+ u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
+ FUNC_MF_CFG_MAX_BW_SHIFT;
+ if (!max_cfg) {
+ BNX2X_ERR("Illegal configuration detected for Max BW - "
+ "using 100 instead\n");
+ max_cfg = 100;
+ }
+ return max_cfg;
+}
+
#endif /* BNX2X_CMN_H */
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 5b44a8b..ef29199 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -238,7 +238,7 @@
speed |= (cmd->speed_hi << 16);
if (IS_MF_SI(bp)) {
- u32 param = 0;
+ u32 param = 0, part;
u32 line_speed = bp->link_vars.line_speed;
/* use 10G if no link detected */
@@ -251,9 +251,11 @@
REQ_BC_VER_4_SET_MF_BW);
return -EINVAL;
}
- if (line_speed < speed) {
- BNX2X_DEV_INFO("New speed should be less or equal "
- "to actual line speed\n");
+ part = (speed * 100) / line_speed;
+ if (line_speed < speed || !part) {
+ BNX2X_DEV_INFO("Speed setting should be in a range "
+ "from 1%% to 100%% "
+ "of actual line speed\n");
return -EINVAL;
}
/* load old values */
@@ -263,8 +265,7 @@
param &= FUNC_MF_CFG_MIN_BW_MASK;
/* set new MAX value */
- param |= (((speed * 100) / line_speed)
- << FUNC_MF_CFG_MAX_BW_SHIFT)
+ param |= (part << FUNC_MF_CFG_MAX_BW_SHIFT)
& FUNC_MF_CFG_MAX_BW_MASK;
bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, param);
@@ -1781,9 +1782,7 @@
{ 0x100, 0x350 }, /* manuf_info */
{ 0x450, 0xf0 }, /* feature_info */
{ 0x640, 0x64 }, /* upgrade_key_info */
- { 0x6a4, 0x64 },
{ 0x708, 0x70 }, /* manuf_key_info */
- { 0x778, 0x70 },
{ 0, 0 }
};
__be32 buf[0x350 / 4];
@@ -1933,11 +1932,11 @@
buf[4] = 1;
etest->flags |= ETH_TEST_FL_FAILED;
}
- if (bp->port.pmf)
- if (bnx2x_link_test(bp, is_serdes) != 0) {
- buf[5] = 1;
- etest->flags |= ETH_TEST_FL_FAILED;
- }
+
+ if (bnx2x_link_test(bp, is_serdes) != 0) {
+ buf[5] = 1;
+ etest->flags |= ETH_TEST_FL_FAILED;
+ }
#ifdef BNX2X_EXTRA_DEBUG
bnx2x_panic_dump(bp);
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h
index 5a268e9..fa6dbe3 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/bnx2x/bnx2x_init.h
@@ -241,7 +241,7 @@
/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
* want to handle "system kill" flow at the moment.
*/
- BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
+ BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff),
BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(PXP2, 0x7ff, 0x7f, 0x7f, 0x7ff),
BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index d584d32..032ae18 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -1974,13 +1974,22 @@
vn_max_rate = 0;
} else {
+ u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
+
vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
- /* If min rate is zero - set it to 1 */
+ /* If fairness is enabled (not all min rates are zeroes) and
+ if current min rate is zero - set it to 1.
+ This is a requirement of the algorithm. */
if (bp->vn_weight_sum && (vn_min_rate == 0))
vn_min_rate = DEF_MIN_RATE;
- vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
- FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
+
+ if (IS_MF_SI(bp))
+ /* maxCfg in percents of linkspeed */
+ vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
+ else
+ /* maxCfg is absolute in 100Mb units */
+ vn_max_rate = maxCfg * 100;
}
DP(NETIF_MSG_IFUP,
@@ -2006,7 +2015,8 @@
m_fair_vn.vn_credit_delta =
max_t(u32, (vn_min_rate * (T_FAIR_COEF /
(8 * bp->vn_weight_sum))),
- (bp->cmng.fair_vars.fair_threshold * 2));
+ (bp->cmng.fair_vars.fair_threshold +
+ MIN_ABOVE_THRESH));
DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n",
m_fair_vn.vn_credit_delta);
}
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index bda60d5..3445ded 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -1239,14 +1239,14 @@
if (unlikely(bp->panic))
return;
+ bnx2x_stats_stm[bp->stats_state][event].action(bp);
+
/* Protect a state change flow */
spin_lock_bh(&bp->stats_lock);
state = bp->stats_state;
bp->stats_state = bnx2x_stats_stm[state][event].next_state;
spin_unlock_bh(&bp->stats_lock);
- bnx2x_stats_stm[state][event].action(bp);
-
if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
state, event, bp->stats_state);
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 7ab534a..7513c45 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -940,7 +940,7 @@
goto open_unlock;
}
- priv->wq = create_freezeable_workqueue("mcp251x_wq");
+ priv->wq = create_freezable_workqueue("mcp251x_wq");
INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler);
diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 8ba81b3..5de46a9 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -18,7 +18,7 @@
config CAN_SOFTING_CS
tristate "Softing Gmbh CAN pcmcia cards"
depends on PCMCIA
- select CAN_SOFTING
+ depends on CAN_SOFTING
---help---
Support for PCMCIA cards from Softing Gmbh & some cards
from Vector Gmbh.
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 5157e15..aeea9f9 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -633,6 +633,7 @@
};
static const struct can_bittiming_const softing_btr_const = {
+ .name = "softing",
.tseg1_min = 1,
.tseg1_max = 16,
.tseg2_min = 1,
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 7ff170c..302be4a 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2760,6 +2760,8 @@
u32 status_idx = (u16) *cp->kcq1.status_idx_ptr;
int kcqe_cnt;
+ /* status block index must be read before reading other fields */
+ rmb();
cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
while ((kcqe_cnt = cnic_get_kcqes(dev, &cp->kcq1))) {
@@ -2770,6 +2772,8 @@
barrier();
if (status_idx != *cp->kcq1.status_idx_ptr) {
status_idx = (u16) *cp->kcq1.status_idx_ptr;
+ /* status block index must be read first */
+ rmb();
cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
} else
break;
@@ -2888,6 +2892,8 @@
u32 last_status = *info->status_idx_ptr;
int kcqe_cnt;
+ /* status block index must be read before reading the KCQ */
+ rmb();
while ((kcqe_cnt = cnic_get_kcqes(dev, info))) {
service_kcqes(dev, kcqe_cnt);
@@ -2898,6 +2904,8 @@
break;
last_status = *info->status_idx_ptr;
+ /* status block index must be read before reading the KCQ */
+ rmb();
}
return last_status;
}
@@ -2906,26 +2914,35 @@
{
struct cnic_dev *dev = (struct cnic_dev *) data;
struct cnic_local *cp = dev->cnic_priv;
- u32 status_idx;
+ u32 status_idx, new_status_idx;
if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
return;
- status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq1);
+ while (1) {
+ status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq1);
- CNIC_WR16(dev, cp->kcq1.io_addr, cp->kcq1.sw_prod_idx + MAX_KCQ_IDX);
+ CNIC_WR16(dev, cp->kcq1.io_addr,
+ cp->kcq1.sw_prod_idx + MAX_KCQ_IDX);
- if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
- status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq2);
+ if (!BNX2X_CHIP_IS_E2(cp->chip_id)) {
+ cnic_ack_bnx2x_int(dev, cp->bnx2x_igu_sb_id, USTORM_ID,
+ status_idx, IGU_INT_ENABLE, 1);
+ break;
+ }
+
+ new_status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq2);
+
+ if (new_status_idx != status_idx)
+ continue;
CNIC_WR16(dev, cp->kcq2.io_addr, cp->kcq2.sw_prod_idx +
MAX_KCQ_IDX);
cnic_ack_igu_sb(dev, cp->bnx2x_igu_sb_id, IGU_SEG_ACCESS_DEF,
status_idx, IGU_INT_ENABLE, 1);
- } else {
- cnic_ack_bnx2x_int(dev, cp->bnx2x_igu_sb_id, USTORM_ID,
- status_idx, IGU_INT_ENABLE, 1);
+
+ break;
}
}
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 56166ae..6aad64d 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2040,7 +2040,7 @@
{
int i;
- BUG_ON(adapter->debugfs_root == NULL);
+ BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root));
/*
* Debugfs support is best effort.
@@ -2061,7 +2061,7 @@
*/
static void cleanup_debugfs(struct adapter *adapter)
{
- BUG_ON(adapter->debugfs_root == NULL);
+ BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root));
/*
* Unlike our sister routine cleanup_proc(), we don't need to remove
@@ -2489,17 +2489,6 @@
struct net_device *netdev;
/*
- * Vet our module parameters.
- */
- if (msi != MSI_MSIX && msi != MSI_MSI) {
- dev_err(&pdev->dev, "bad module parameter msi=%d; must be %d"
- " (MSI-X or MSI) or %d (MSI)\n", msi, MSI_MSIX,
- MSI_MSI);
- err = -EINVAL;
- goto err_out;
- }
-
- /*
* Print our driver banner the first time we're called to initialize a
* device.
*/
@@ -2711,11 +2700,11 @@
/*
* Set up our debugfs entries.
*/
- if (cxgb4vf_debugfs_root) {
+ if (!IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) {
adapter->debugfs_root =
debugfs_create_dir(pci_name(pdev),
cxgb4vf_debugfs_root);
- if (adapter->debugfs_root == NULL)
+ if (IS_ERR_OR_NULL(adapter->debugfs_root))
dev_warn(&pdev->dev, "could not create debugfs"
" directory");
else
@@ -2770,7 +2759,7 @@
*/
err_free_debugfs:
- if (adapter->debugfs_root) {
+ if (!IS_ERR_OR_NULL(adapter->debugfs_root)) {
cleanup_debugfs(adapter);
debugfs_remove_recursive(adapter->debugfs_root);
}
@@ -2802,7 +2791,6 @@
err_disable_device:
pci_disable_device(pdev);
-err_out:
return err;
}
@@ -2840,7 +2828,7 @@
/*
* Tear down our debugfs entries.
*/
- if (adapter->debugfs_root) {
+ if (!IS_ERR_OR_NULL(adapter->debugfs_root)) {
cleanup_debugfs(adapter);
debugfs_remove_recursive(adapter->debugfs_root);
}
@@ -2874,6 +2862,46 @@
}
/*
+ * "Shutdown" quiesce the device, stopping Ingress Packet and Interrupt
+ * delivery.
+ */
+static void __devexit cxgb4vf_pci_shutdown(struct pci_dev *pdev)
+{
+ struct adapter *adapter;
+ int pidx;
+
+ adapter = pci_get_drvdata(pdev);
+ if (!adapter)
+ return;
+
+ /*
+ * Disable all Virtual Interfaces. This will shut down the
+ * delivery of all ingress packets into the chip for these
+ * Virtual Interfaces.
+ */
+ for_each_port(adapter, pidx) {
+ struct net_device *netdev;
+ struct port_info *pi;
+
+ if (!test_bit(pidx, &adapter->registered_device_map))
+ continue;
+
+ netdev = adapter->port[pidx];
+ if (!netdev)
+ continue;
+
+ pi = netdev_priv(netdev);
+ t4vf_enable_vi(adapter, pi->viid, false, false);
+ }
+
+ /*
+ * Free up all Queues which will prevent further DMA and
+ * Interrupts allowing various internal pathways to drain.
+ */
+ t4vf_free_sge_resources(adapter);
+}
+
+/*
* PCI Device registration data structures.
*/
#define CH_DEVICE(devid, idx) \
@@ -2906,6 +2934,7 @@
.id_table = cxgb4vf_pci_tbl,
.probe = cxgb4vf_pci_probe,
.remove = __devexit_p(cxgb4vf_pci_remove),
+ .shutdown = __devexit_p(cxgb4vf_pci_shutdown),
};
/*
@@ -2915,14 +2944,25 @@
{
int ret;
+ /*
+ * Vet our module parameters.
+ */
+ if (msi != MSI_MSIX && msi != MSI_MSI) {
+ printk(KERN_WARNING KBUILD_MODNAME
+ ": bad module parameter msi=%d; must be %d"
+ " (MSI-X or MSI) or %d (MSI)\n",
+ msi, MSI_MSIX, MSI_MSI);
+ return -EINVAL;
+ }
+
/* Debugfs support is optional, just warn if this fails */
cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (!cxgb4vf_debugfs_root)
+ if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
printk(KERN_WARNING KBUILD_MODNAME ": could not create"
" debugfs entry, continuing\n");
ret = pci_register_driver(&cxgb4vf_driver);
- if (ret < 0)
+ if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root))
debugfs_remove(cxgb4vf_debugfs_root);
return ret;
}
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
index 0f51c80..192db22 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/cxgb4vf/t4vf_hw.c
@@ -171,7 +171,7 @@
delay_idx = 0;
ms = delay[0];
- for (i = 0; i < 500; i += ms) {
+ for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) {
if (sleep_ok) {
ms = delay[delay_idx];
if (delay_idx < ARRAY_SIZE(delay) - 1)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2a628d1..7018bfe 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1008,7 +1008,7 @@
int ret;
/* free and bail if we are shutting down */
- if (unlikely(!netif_running(ndev))) {
+ if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
dev_kfree_skb_any(skb);
return;
}
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 2d4c4fc..461dd6f 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -802,10 +802,7 @@
/* Checksum mode */
dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
- /* GPIO0 on pre-activate PHY */
- iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
- iow(db, DM9000_GPR, 0); /* Enable PHY */
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
@@ -852,8 +849,8 @@
unsigned long flags;
/* Save previous register address */
- reg_save = readb(db->io_addr);
spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
netif_stop_queue(dev);
dm9000_reset(db);
@@ -1194,6 +1191,10 @@
if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
return -EAGAIN;
+ /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
+ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
+ mdelay(1); /* delay needs by DM9000B */
+
/* Initialize DM9000 board */
dm9000_reset(db);
dm9000_init_dm9000(dev);
diff --git a/drivers/net/dnet.c b/drivers/net/dnet.c
index 9d8a20b..8318ea0 100644
--- a/drivers/net/dnet.c
+++ b/drivers/net/dnet.c
@@ -337,8 +337,6 @@
for (i = 0; i < PHY_MAX_ADDR; i++)
bp->mii_bus->irq[i] = PHY_POLL;
- platform_set_drvdata(bp->dev, bp->mii_bus);
-
if (mdiobus_register(bp->mii_bus)) {
err = -ENXIO;
goto err_out_free_mdio_irq;
@@ -863,6 +861,7 @@
bp = netdev_priv(dev);
bp->dev = dev;
+ platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
spin_lock_init(&bp->lock);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 55c1711f..33e7c45a 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -42,7 +42,8 @@
#define GBE_CONFIG_RAM_BASE \
((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET))
-#define GBE_CONFIG_BASE_VIRT phys_to_virt(GBE_CONFIG_RAM_BASE)
+#define GBE_CONFIG_BASE_VIRT \
+ ((void __iomem *)phys_to_virt(GBE_CONFIG_RAM_BASE))
#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \
(iowrite16_rep(base + offset, data, count))
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3065870..2e50228 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -937,6 +937,9 @@
u16 phy_status, phy_1000t_status, phy_ext_status;
u16 pci_status;
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
e1e_rphy(hw, PHY_STATUS, &phy_status);
e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
@@ -1506,6 +1509,9 @@
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter, downshift_task);
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
}
@@ -3338,6 +3344,21 @@
return 0;
}
+static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!(adapter->flags2 & FLAG2_DMA_BURST))
+ return;
+
+ /* flush pending descriptor writebacks to memory */
+ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+ ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+ /* execute the writes immediately */
+ e1e_flush();
+}
+
void e1000e_down(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -3377,6 +3398,9 @@
if (!pci_channel_offline(adapter->pdev))
e1000e_reset(adapter);
+
+ e1000e_flush_descriptors(adapter);
+
e1000_clean_tx_ring(adapter);
e1000_clean_rx_ring(adapter);
@@ -3765,6 +3789,10 @@
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter, update_phy_task);
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
e1000_get_phy_info(&adapter->hw);
}
@@ -3775,6 +3803,10 @@
static void e1000_update_phy_info(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
schedule_work(&adapter->update_phy_task);
}
@@ -4149,6 +4181,9 @@
u32 link, tctl;
int tx_pending = 0;
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
link = e1000e_has_link(adapter);
if ((netif_carrier_ok(netdev)) && link) {
/* Cancel scheduled suspend requests. */
@@ -4337,19 +4372,12 @@
else
ew32(ICS, E1000_ICS_RXDMT0);
+ /* flush pending descriptors to memory before detecting Tx hang */
+ e1000e_flush_descriptors(adapter);
+
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
- /* flush partial descriptors to memory before detecting Tx hang */
- if (adapter->flags2 & FLAG2_DMA_BURST) {
- ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
- ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
- /*
- * no need to flush the writes because the timeout code does
- * an er32 first thing
- */
- }
-
/*
* With 82571 controllers, LAA may be overwritten due to controller
* reset from the other port. Set the appropriate LAA in RAR[0]
@@ -4887,6 +4915,10 @@
struct e1000_adapter *adapter;
adapter = container_of(work, struct e1000_adapter, reset_task);
+ /* don't run the task if already down */
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
(adapter->flags & FLAG_RX_RESTART_NOW))) {
e1000e_dump(adapter);
@@ -5935,7 +5967,8 @@
/* APME bit in EEPROM is mapped to WUC.APME */
eeprom_data = er32(WUC);
eeprom_apme_mask = E1000_WUC_APME;
- if (eeprom_data & E1000_WUC_PHY_WAKE)
+ if ((hw->mac.type > e1000_ich10lan) &&
+ (eeprom_data & E1000_WUC_PHY_WAKE))
adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 2a71373..cd0282d 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -74,7 +74,8 @@
}, {
.name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
- }
+ },
+ { }
};
static unsigned char macaddr[ETH_ALEN];
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index af09296..9c0b1ba 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5645,6 +5645,8 @@
goto out_error;
}
+ netif_carrier_off(dev);
+
dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n",
dev->name, np->phy_oui, np->phyaddr, dev->dev_addr);
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index 74486a8..af3822f 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -220,7 +220,7 @@
* The parameter rar_count will usually be hw->mac.rar_entry_count
* unless there are workarounds that change this.
**/
-void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
+static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count)
{
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 8753980..c54a882 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -159,7 +159,7 @@
struct scatterlist *sg;
unsigned int i, j, dmacount;
unsigned int len;
- static const unsigned int bufflen = 4096;
+ static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
unsigned int firstoff = 0;
unsigned int lastsize;
unsigned int thisoff = 0;
@@ -254,6 +254,24 @@
/* only the last buffer may have non-full bufflen */
lastsize = thisoff + thislen;
+ /*
+ * lastsize can not be buffer len.
+ * If it is then adding another buffer with lastsize = 1.
+ */
+ if (lastsize == bufflen) {
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough user buffers. We need an extra "
+ "buffer because lastsize is bufflen.\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
+ ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
+ j++;
+ lastsize = 1;
+ }
+
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
@@ -532,6 +550,24 @@
e_err(drv, "failed to allocated FCoE DDP pool\n");
spin_lock_init(&fcoe->lock);
+
+ /* Extra buffer to be shared by all DDPs for HW work around */
+ fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+ if (fcoe->extra_ddp_buffer == NULL) {
+ e_err(drv, "failed to allocated extra DDP buffer\n");
+ goto out_extra_ddp_buffer_alloc;
+ }
+
+ fcoe->extra_ddp_buffer_dma =
+ dma_map_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma)) {
+ e_err(drv, "failed to map extra DDP buffer\n");
+ goto out_extra_ddp_buffer_dma;
+ }
}
/* Enable L2 eth type filter for FCoE */
@@ -581,6 +617,14 @@
}
}
#endif
+
+ return;
+
+out_extra_ddp_buffer_dma:
+ kfree(fcoe->extra_ddp_buffer);
+out_extra_ddp_buffer_alloc:
+ pci_pool_destroy(fcoe->pool);
+ fcoe->pool = NULL;
}
/**
@@ -600,6 +644,11 @@
if (fcoe->pool) {
for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
ixgbe_fcoe_ddp_put(adapter->netdev, i);
+ dma_unmap_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ kfree(fcoe->extra_ddp_buffer);
pci_pool_destroy(fcoe->pool);
fcoe->pool = NULL;
}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index 4bc2c55..65cc8fb 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -70,6 +70,8 @@
spinlock_t lock;
struct pci_pool *pool;
struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+ unsigned char *extra_ddp_buffer;
+ dma_addr_t extra_ddp_buffer_dma;
};
#endif /* _IXGBE_FCOE_H */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index fbae703..30f9ccf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3728,7 +3728,8 @@
* We need to try and force an autonegotiation
* session, then bring up link.
*/
- hw->mac.ops.setup_sfp(hw);
+ if (hw->mac.ops.setup_sfp)
+ hw->mac.ops.setup_sfp(hw);
if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
schedule_work(&adapter->multispeed_fiber_task);
} else {
@@ -5968,7 +5969,8 @@
unregister_netdev(adapter->netdev);
return;
}
- hw->mac.ops.setup_sfp(hw);
+ if (hw->mac.ops.setup_sfp)
+ hw->mac.ops.setup_sfp(hw);
if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
/* This will also work for DA Twinax connections */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index f69e73e..79ccb54 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -260,7 +260,7 @@
for (i = 0; i < PHY_MAX_ADDR; i++)
bp->mii_bus->irq[i] = PHY_POLL;
- platform_set_drvdata(bp->dev, bp->mii_bus);
+ dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
if (mdiobus_register(bp->mii_bus))
goto err_out_free_mdio_irq;
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index a0c26a9..e1e33c8 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -73,7 +73,7 @@
struct pch_gbe_regs_mac_adr mac_adr[16];
u32 ADDR_MASK;
u32 MIIM;
- u32 reserve2;
+ u32 MAC_ADDR_LOAD;
u32 RGMII_ST;
u32 RGMII_CTRL;
u32 reserve3[3];
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 4c9a7d4..b99e90a 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -29,6 +29,7 @@
#define PCH_GBE_SHORT_PKT 64
#define DSC_INIT16 0xC000
#define PCH_GBE_DMA_ALIGN 0
+#define PCH_GBE_DMA_PADDING 2
#define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */
#define PCH_GBE_COPYBREAK_DEFAULT 256
#define PCH_GBE_PCI_BAR 1
@@ -88,6 +89,12 @@
static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
int data);
+
+inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
+{
+ iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD);
+}
+
/**
* pch_gbe_mac_read_mac_addr - Read MAC address
* @hw: Pointer to the HW structure
@@ -1365,16 +1372,13 @@
struct pch_gbe_buffer *buffer_info;
struct pch_gbe_rx_desc *rx_desc;
u32 length;
- unsigned char tmp_packet[ETH_HLEN];
unsigned int i;
unsigned int cleaned_count = 0;
bool cleaned = false;
- struct sk_buff *skb;
+ struct sk_buff *skb, *new_skb;
u8 dma_status;
u16 gbec_status;
u32 tcp_ip_status;
- u8 skb_copy_flag = 0;
- u8 skb_padding_flag = 0;
i = rx_ring->next_to_clean;
@@ -1418,55 +1422,70 @@
pr_err("Receive CRC Error\n");
} else {
/* get receive length */
- /* length convert[-3], padding[-2] */
- length = (rx_desc->rx_words_eob) - 3 - 2;
+ /* length convert[-3] */
+ length = (rx_desc->rx_words_eob) - 3;
/* Decide the data conversion method */
if (!adapter->rx_csum) {
/* [Header:14][payload] */
- skb_padding_flag = 0;
- skb_copy_flag = 1;
- } else {
- /* [Header:14][padding:2][payload] */
- skb_padding_flag = 1;
- if (length < copybreak)
- skb_copy_flag = 1;
- else
- skb_copy_flag = 0;
- }
-
- /* Data conversion */
- if (skb_copy_flag) { /* recycle skb */
- struct sk_buff *new_skb;
- new_skb =
- netdev_alloc_skb(netdev,
- length + NET_IP_ALIGN);
- if (new_skb) {
- if (!skb_padding_flag) {
- skb_reserve(new_skb,
- NET_IP_ALIGN);
+ if (NET_IP_ALIGN) {
+ /* Because alignment differs,
+ * the new_skb is newly allocated,
+ * and data is copied to new_skb.*/
+ new_skb = netdev_alloc_skb(netdev,
+ length + NET_IP_ALIGN);
+ if (!new_skb) {
+ /* dorrop error */
+ pr_err("New skb allocation "
+ "Error\n");
+ goto dorrop;
}
+ skb_reserve(new_skb, NET_IP_ALIGN);
memcpy(new_skb->data, skb->data,
- length);
- /* save the skb
- * in buffer_info as good */
+ length);
skb = new_skb;
- } else if (!skb_padding_flag) {
- /* dorrop error */
- pr_err("New skb allocation Error\n");
- goto dorrop;
+ } else {
+ /* DMA buffer is used as SKB as it is.*/
+ buffer_info->skb = NULL;
}
} else {
- buffer_info->skb = NULL;
+ /* [Header:14][padding:2][payload] */
+ /* The length includes padding length */
+ length = length - PCH_GBE_DMA_PADDING;
+ if ((length < copybreak) ||
+ (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) {
+ /* Because alignment differs,
+ * the new_skb is newly allocated,
+ * and data is copied to new_skb.
+ * Padding data is deleted
+ * at the time of a copy.*/
+ new_skb = netdev_alloc_skb(netdev,
+ length + NET_IP_ALIGN);
+ if (!new_skb) {
+ /* dorrop error */
+ pr_err("New skb allocation "
+ "Error\n");
+ goto dorrop;
+ }
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ memcpy(new_skb->data, skb->data,
+ ETH_HLEN);
+ memcpy(&new_skb->data[ETH_HLEN],
+ &skb->data[ETH_HLEN +
+ PCH_GBE_DMA_PADDING],
+ length - ETH_HLEN);
+ skb = new_skb;
+ } else {
+ /* Padding data is deleted
+ * by moving header data.*/
+ memmove(&skb->data[PCH_GBE_DMA_PADDING],
+ &skb->data[0], ETH_HLEN);
+ skb_reserve(skb, NET_IP_ALIGN);
+ buffer_info->skb = NULL;
+ }
}
- if (skb_padding_flag) {
- memcpy(&tmp_packet[0], &skb->data[0], ETH_HLEN);
- memcpy(&skb->data[NET_IP_ALIGN], &tmp_packet[0],
- ETH_HLEN);
- skb_reserve(skb, NET_IP_ALIGN);
-
- }
-
+ /* The length includes FCS length */
+ length = length - ETH_FCS_LEN;
/* update status of driver */
adapter->stats.rx_bytes += length;
adapter->stats.rx_packets++;
@@ -2318,6 +2337,7 @@
netdev->features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO;
pch_gbe_set_ethtool_ops(netdev);
+ pch_gbe_mac_load_mac_addr(&adapter->hw);
pch_gbe_mac_reset_hw(&adapter->hw);
/* setup the private structure */
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 9226cda..530ab5a 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -691,6 +691,7 @@
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
PCMCIA_DEVICE_NULL,
};
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 59ccf0c..7ffdb80 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -25,6 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/firmware.h>
+#include <linux/pci-aspm.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -617,8 +618,9 @@
}
}
-static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd)
+static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd)
{
+ void __iomem *ioaddr = tp->mmio_addr;
int i;
RTL_W8(ERIDR, cmd);
@@ -630,7 +632,7 @@
break;
}
- ocp_write(ioaddr, 0x1, 0x30, 0x00000001);
+ ocp_write(tp, 0x1, 0x30, 0x00000001);
}
#define OOB_CMD_RESET 0x00
@@ -2868,8 +2870,11 @@
{
void __iomem *ioaddr = tp->mmio_addr;
- if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+ if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
+ (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
return;
+ }
if (((tp->mac_version == RTL_GIGA_MAC_VER_23) ||
(tp->mac_version == RTL_GIGA_MAC_VER_24)) &&
@@ -2891,6 +2896,8 @@
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ case RTL_GIGA_MAC_VER_28:
RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80);
break;
}
@@ -2900,12 +2907,17 @@
{
void __iomem *ioaddr = tp->mmio_addr;
- if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+ if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
+ (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
return;
+ }
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ case RTL_GIGA_MAC_VER_28:
RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
break;
}
@@ -3009,6 +3021,11 @@
mii->reg_num_mask = 0x1f;
mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII);
+ /* disable ASPM completely as that cause random device stop working
+ * problems as well as full system hangs for some PCIe devices users */
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
if (rc < 0) {
@@ -3042,7 +3059,7 @@
goto err_out_mwi_2;
}
- tp->cp_cmd = PCIMulRW | RxChkSum;
+ tp->cp_cmd = RxChkSum;
if ((sizeof(dma_addr_t) > 4) &&
!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -3190,6 +3207,8 @@
if (pci_dev_run_wake(pdev))
pm_runtime_put_noidle(&pdev->dev);
+ netif_carrier_off(dev);
+
out:
return rc;
@@ -3316,7 +3335,8 @@
/* Disable interrupts */
rtl8169_irq_mask_and_ack(ioaddr);
- if (tp->mac_version == RTL_GIGA_MAC_VER_28) {
+ if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_28) {
while (RTL_R8(TxPoll) & NPQ)
udelay(20);
@@ -3845,8 +3865,7 @@
Cxpl_dbg_sel | \
ASF | \
PktCntrDisable | \
- PCIDAC | \
- PCIMulRW)
+ Mac_dbgo_sel)
static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
@@ -3876,8 +3895,6 @@
if ((cfg1 & LEDS0) && (cfg1 & LEDS1))
RTL_W8(Config1, cfg1 & ~LEDS0);
- RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
-
rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1));
}
@@ -3889,8 +3906,6 @@
RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
-
- RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev)
@@ -3916,6 +3931,8 @@
}
}
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_07:
rtl_hw_start_8102e_1(ioaddr, pdev);
@@ -3930,14 +3947,13 @@
break;
}
- RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
- tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
-
+ tp->cp_cmd &= ~R810X_CPCMD_QUIRK_MASK;
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_W16(IntrMitigate, 0x0000);
@@ -3947,14 +3963,10 @@
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
- RTL_W8(Cfg9346, Cfg9346_Lock);
-
RTL_R8(IntrMask);
rtl_set_rx_mode(dev);
- RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
-
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
RTL_W16(IntrMask, tp->intr_event);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 0e8bb19..ca886d9 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -569,9 +569,14 @@
struct ethtool_test *test, u64 *data)
{
struct efx_nic *efx = netdev_priv(net_dev);
- struct efx_self_tests efx_tests;
+ struct efx_self_tests *efx_tests;
int already_up;
- int rc;
+ int rc = -ENOMEM;
+
+ efx_tests = kzalloc(sizeof(*efx_tests), GFP_KERNEL);
+ if (!efx_tests)
+ goto fail;
+
ASSERT_RTNL();
if (efx->state != STATE_RUNNING) {
@@ -589,13 +594,11 @@
if (rc) {
netif_err(efx, drv, efx->net_dev,
"failed opening device.\n");
- goto fail2;
+ goto fail1;
}
}
- memset(&efx_tests, 0, sizeof(efx_tests));
-
- rc = efx_selftest(efx, &efx_tests, test->flags);
+ rc = efx_selftest(efx, efx_tests, test->flags);
if (!already_up)
dev_close(efx->net_dev);
@@ -604,10 +607,11 @@
rc == 0 ? "passed" : "failed",
(test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on");
- fail2:
- fail1:
+fail1:
/* Fill ethtool results structures */
- efx_ethtool_fill_self_tests(efx, &efx_tests, NULL, data);
+ efx_ethtool_fill_self_tests(efx, efx_tests, NULL, data);
+ kfree(efx_tests);
+fail:
if (rc)
test->flags |= ETH_TEST_FL_FAILED;
}
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 42daf98..35b28f4 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3856,9 +3856,6 @@
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- /* device is off until link detection */
- netif_carrier_off(dev);
-
return dev;
}
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 34a0af3..0e5f031 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1560,8 +1560,10 @@
priv->hw = device;
- if (device_can_wakeup(priv->device))
+ if (device_can_wakeup(priv->device)) {
priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
+ enable_irq_wake(dev->irq);
+ }
return 0;
}
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 93b32d3..06c0e503 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11158,7 +11158,9 @@
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
+ if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
+ ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+ !netif_running(dev)))
return -EAGAIN;
spin_lock_bh(&tp->lock);
@@ -11174,7 +11176,9 @@
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
+ if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
+ ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+ !netif_running(dev)))
return -EAGAIN;
spin_lock_bh(&tp->lock);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 02b622e..5002f5b 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -651,6 +651,10 @@
.driver_info = (unsigned long)&dm9601_info,
},
{
+ USB_DEVICE(0x0fe6, 0x9700), /* DM9601 USB to Fast Ethernet Adapter */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
USB_DEVICE(0x0a46, 0x9000), /* DM9000E */
.driver_info = (unsigned long)&dm9601_info,
},
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index bed8fce..6d83812 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2628,15 +2628,15 @@
static void hso_free_tiomget(struct hso_serial *serial)
{
- struct hso_tiocmget *tiocmget = serial->tiocmget;
+ struct hso_tiocmget *tiocmget;
+ if (!serial)
+ return;
+ tiocmget = serial->tiocmget;
if (tiocmget) {
- if (tiocmget->urb) {
- usb_free_urb(tiocmget->urb);
- tiocmget->urb = NULL;
- }
+ usb_free_urb(tiocmget->urb);
+ tiocmget->urb = NULL;
serial->tiocmget = NULL;
kfree(tiocmget);
-
}
}
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ed9a416..95c41d5 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -931,8 +931,10 @@
if (urb != NULL) {
clear_bit (EVENT_RX_MEMORY, &dev->flags);
status = usb_autopm_get_interface(dev->intf);
- if (status < 0)
+ if (status < 0) {
+ usb_free_urb(urb);
goto fail_lowmem;
+ }
if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
resched = 0;
usb_autopm_put_interface(dev->intf);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 78c26fd..62ce2f4 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -282,6 +282,34 @@
return 0;
}
+/*
+ * Wait for synth to settle
+ */
+static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ /*
+ * On 5211+ read activation -> rx delay
+ * and use it (100ns steps).
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ u32 delay;
+ delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+ AR5K_PHY_RX_DELAY_M;
+ delay = (channel->hw_value & CHANNEL_CCK) ?
+ ((delay << 2) / 22) : (delay / 10);
+ if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
+ delay = delay << 1;
+ if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
+ delay = delay << 2;
+ /* XXX: /2 on turbo ? Let's be safe
+ * for now */
+ udelay(100 + delay);
+ } else {
+ mdelay(1);
+ }
+}
+
/**********************\
* RF Gain optimization *
@@ -1253,6 +1281,7 @@
case AR5K_RF5111:
ret = ath5k_hw_rf5111_channel(ah, channel);
break;
+ case AR5K_RF2317:
case AR5K_RF2425:
ret = ath5k_hw_rf2425_channel(ah, channel);
break;
@@ -3237,6 +3266,13 @@
/* Failed */
if (i >= 100)
return -EIO;
+
+ /* Set channel and wait for synth */
+ ret = ath5k_hw_channel(ah, channel);
+ if (ret)
+ return ret;
+
+ ath5k_hw_wait_for_synth(ah, channel);
}
/*
@@ -3251,13 +3287,53 @@
if (ret)
return ret;
+ /* Write OFDM timings on 5212*/
+ if (ah->ah_version == AR5K_AR5212 &&
+ channel->hw_value & CHANNEL_OFDM) {
+
+ ret = ath5k_hw_write_ofdm_timings(ah, channel);
+ if (ret)
+ return ret;
+
+ /* Spur info is available only from EEPROM versions
+ * greater than 5.3, but the EEPROM routines will use
+ * static values for older versions */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
+ ath5k_hw_set_spur_mitigation_filter(ah,
+ channel);
+ }
+
+ /* If we used fast channel switching
+ * we are done, release RF bus and
+ * fire up NF calibration.
+ *
+ * Note: Only NF calibration due to
+ * channel change, not AGC calibration
+ * since AGC is still running !
+ */
+ if (fast) {
+ /*
+ * Release RF Bus grant
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+ AR5K_PHY_RFBUS_REQ_REQUEST);
+
+ /*
+ * Start NF calibration
+ */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_NF);
+
+ return ret;
+ }
+
/*
* For 5210 we do all initialization using
* initvals, so we don't have to modify
* any settings (5210 also only supports
* a/aturbo modes)
*/
- if ((ah->ah_version != AR5K_AR5210) && !fast) {
+ if (ah->ah_version != AR5K_AR5210) {
/*
* Write initial RF gain settings
@@ -3276,22 +3352,6 @@
if (ret)
return ret;
- /* Write OFDM timings on 5212*/
- if (ah->ah_version == AR5K_AR5212 &&
- channel->hw_value & CHANNEL_OFDM) {
-
- ret = ath5k_hw_write_ofdm_timings(ah, channel);
- if (ret)
- return ret;
-
- /* Spur info is available only from EEPROM versions
- * greater than 5.3, but the EEPROM routines will use
- * static values for older versions */
- if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
- ath5k_hw_set_spur_mitigation_filter(ah,
- channel);
- }
-
/*Enable/disable 802.11b mode on 5111
(enable 2111 frequency converter + CCK)*/
if (ah->ah_radio == AR5K_RF5111) {
@@ -3322,47 +3382,20 @@
*/
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
- /*
- * On 5211+ read activation -> rx delay
- * and use it.
- */
- if (ah->ah_version != AR5K_AR5210) {
- u32 delay;
- delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
- AR5K_PHY_RX_DELAY_M;
- delay = (channel->hw_value & CHANNEL_CCK) ?
- ((delay << 2) / 22) : (delay / 10);
- if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
- delay = delay << 1;
- if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
- delay = delay << 2;
- /* XXX: /2 on turbo ? Let's be safe
- * for now */
- udelay(100 + delay);
- } else {
- mdelay(1);
- }
+ ath5k_hw_wait_for_synth(ah, channel);
- if (fast)
- /*
- * Release RF Bus grant
- */
- AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
- AR5K_PHY_RFBUS_REQ_REQUEST);
- else {
- /*
- * Perform ADC test to see if baseband is ready
- * Set tx hold and check adc test register
- */
- phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
- ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
- for (i = 0; i <= 20; i++) {
- if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
- break;
- udelay(200);
- }
- ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+ /*
+ * Perform ADC test to see if baseband is ready
+ * Set tx hold and check adc test register
+ */
+ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ udelay(200);
}
+ ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
/*
* Start automatic gain control calibration
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 23838e3..1a7fa6e 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,7 +21,6 @@
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
-#include <linux/pm_qos_params.h>
#include "debug.h"
#include "common.h"
@@ -57,8 +56,6 @@
#define A_MAX(a, b) ((a) > (b) ? (a) : (b))
-#define ATH9K_PM_QOS_DEFAULT_VALUE 55
-
#define TSF_TO_TU(_h,_l) \
((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
@@ -633,8 +630,6 @@
struct ath_descdma txsdma;
struct ath_ant_comb ant_comb;
-
- struct pm_qos_request_list pm_qos_req;
};
struct ath_wiphy {
@@ -666,7 +661,6 @@
extern struct ieee80211_ops ath9k_ops;
extern int ath9k_modparam_nohwcrypt;
extern int led_blink;
-extern int ath9k_pm_qos_value;
extern bool is_ath9k_unloaded;
irqreturn_t ath_isr(int irq, void *dev);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 5ab3084..07b1633 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -219,8 +219,9 @@
struct tx_buf *tx_buf = NULL;
struct sk_buff *nskb = NULL;
int ret = 0, i;
- u16 *hdr, tx_skb_cnt = 0;
+ u16 tx_skb_cnt = 0;
u8 *buf;
+ __le16 *hdr;
if (hif_dev->tx.tx_skb_cnt == 0)
return 0;
@@ -245,9 +246,9 @@
buf = tx_buf->buf;
buf += tx_buf->offset;
- hdr = (u16 *)buf;
- *hdr++ = nskb->len;
- *hdr++ = ATH_USB_TX_STREAM_MODE_TAG;
+ hdr = (__le16 *)buf;
+ *hdr++ = cpu_to_le16(nskb->len);
+ *hdr++ = cpu_to_le16(ATH_USB_TX_STREAM_MODE_TAG);
buf += 4;
memcpy(buf, nskb->data, nskb->len);
tx_buf->len = nskb->len + 4;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 087a6a9..a033d01 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -41,10 +41,6 @@
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
-int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE;
-module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH);
-MODULE_PARM_DESC(pmqos, "User specified PM-QOS value");
-
bool is_ath9k_unloaded;
/* We use the hw_value as an index into our private channel structure */
@@ -762,9 +758,6 @@
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
- pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
-
return 0;
error_world:
@@ -831,7 +824,6 @@
}
ieee80211_unregister_hw(hw);
- pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
ath_tx_cleanup(sc);
ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 180170d..2915b11 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -885,7 +885,7 @@
struct ath_common *common = ath9k_hw_common(ah);
if (!(ints & ATH9K_INT_GLOBAL))
- ath9k_hw_enable_interrupts(ah);
+ ath9k_hw_disable_interrupts(ah);
ath_dbg(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
@@ -963,7 +963,8 @@
REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
}
- ath9k_hw_enable_interrupts(ah);
+ if (ints & ATH9K_INT_GLOBAL)
+ ath9k_hw_enable_interrupts(ah);
return;
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index da5c645..a09d15f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1173,12 +1173,6 @@
ath9k_btcoex_timer_resume(sc);
}
- /* User has the option to provide pm-qos value as a module
- * parameter rather than using the default value of
- * 'ATH9K_PM_QOS_DEFAULT_VALUE'.
- */
- pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
-
if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
common->bus_ops->extn_synch_en(common);
@@ -1345,8 +1339,6 @@
sc->sc_flags |= SC_OP_INVALID;
- pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
-
mutex_unlock(&sc->mutex);
ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index 537732e..f82c400 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -118,6 +118,8 @@
{ USB_DEVICE(0x057c, 0x8402) },
/* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
{ USB_DEVICE(0x1668, 0x1200) },
+ /* Airlive X.USB a/b/g/n */
+ { USB_DEVICE(0x1b75, 0x9170) },
/* terminate */
{}
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index a9b852b..39b6f16 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -402,72 +402,6 @@
}
#endif
-/**
- * iwl3945_good_plcp_health - checks for plcp error.
- *
- * When the plcp error is exceeding the thresholds, reset the radio
- * to improve the throughput.
- */
-static bool iwl3945_good_plcp_health(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt)
-{
- bool rc = true;
- struct iwl3945_notif_statistics current_stat;
- int combined_plcp_delta;
- unsigned int plcp_msec;
- unsigned long plcp_received_jiffies;
-
- if (priv->cfg->base_params->plcp_delta_threshold ==
- IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
- IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
- return rc;
- }
- memcpy(¤t_stat, pkt->u.raw, sizeof(struct
- iwl3945_notif_statistics));
- /*
- * check for plcp_err and trigger radio reset if it exceeds
- * the plcp error threshold plcp_delta.
- */
- plcp_received_jiffies = jiffies;
- plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
- (long) priv->plcp_jiffies);
- priv->plcp_jiffies = plcp_received_jiffies;
- /*
- * check to make sure plcp_msec is not 0 to prevent division
- * by zero.
- */
- if (plcp_msec) {
- combined_plcp_delta =
- (le32_to_cpu(current_stat.rx.ofdm.plcp_err) -
- le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err));
-
- if ((combined_plcp_delta > 0) &&
- ((combined_plcp_delta * 100) / plcp_msec) >
- priv->cfg->base_params->plcp_delta_threshold) {
- /*
- * if plcp_err exceed the threshold, the following
- * data is printed in csv format:
- * Text: plcp_err exceeded %d,
- * Received ofdm.plcp_err,
- * Current ofdm.plcp_err,
- * combined_plcp_delta,
- * plcp_msec
- */
- IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
- "%u, %d, %u mSecs\n",
- priv->cfg->base_params->plcp_delta_threshold,
- le32_to_cpu(current_stat.rx.ofdm.plcp_err),
- combined_plcp_delta, plcp_msec);
- /*
- * Reset the RF radio due to the high plcp
- * error rate
- */
- rc = false;
- }
- }
- return rc;
-}
-
void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
@@ -2734,7 +2668,6 @@
.isr_ops = {
.isr = iwl_isr_legacy,
},
- .check_plcp_health = iwl3945_good_plcp_health,
.debugfs_ops = {
.rx_stats_read = iwl3945_ucode_rx_stats_read,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 79ab0a6..537fb8c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -51,7 +51,7 @@
#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 2
+#define IWL5000_UCODE_API_MAX 5
#define IWL5150_UCODE_API_MAX 2
/* Lowest firmware API version supported */
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 1eacba4..0494d7b 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -199,6 +199,7 @@
while (i != idx) {
u16 len;
struct sk_buff *skb;
+ dma_addr_t dma_addr;
desc = &ring[i];
len = le16_to_cpu(desc->len);
skb = rx_buf[i];
@@ -216,17 +217,20 @@
len = priv->common.rx_mtu;
}
+ dma_addr = le32_to_cpu(desc->host_addr);
+ pci_dma_sync_single_for_cpu(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
skb_put(skb, len);
if (p54_rx(dev, skb)) {
- pci_unmap_single(priv->pdev,
- le32_to_cpu(desc->host_addr),
- priv->common.rx_mtu + 32,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
rx_buf[i] = NULL;
- desc->host_addr = 0;
+ desc->host_addr = cpu_to_le32(0);
} else {
skb_trim(skb, 0);
+ pci_dma_sync_single_for_device(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
}
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 21713a7..9b344a9 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -98,6 +98,7 @@
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
+ {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
{USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
{USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 848cc2c..518542b 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2597,6 +2597,9 @@
__le32 mode;
int ret;
+ if (priv->device_type != RNDIS_BCM4320B)
+ return -ENOTSUPP;
+
netdev_dbg(usbdev->net, "%s(): %s, %d\n", __func__,
enabled ? "enabled" : "disabled",
timeout);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aa97971..3b3f1e4 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -652,6 +652,12 @@
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+ /*
+ * The hardware has already checked the Michael Mic and has
+ * stripped it from the frame. Signal this to mac80211.
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
rxdesc->flags |= RX_FLAG_DECRYPTED;
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
@@ -1065,6 +1071,8 @@
{ PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) },
#endif
#ifdef CONFIG_RT2800PCI_RT35XX
+ { PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index b97a4a5..197a36c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -486,6 +486,12 @@
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+ /*
+ * The hardware has already checked the Michael Mic and has
+ * stripped it from the frame. Signal this to mac80211.
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
rxdesc->flags |= RX_FLAG_DECRYPTED;
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index ffedfd4..ea15800 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig NFC_DEVICES
- bool "NFC devices"
+ bool "Near Field Communication (NFC) devices"
default n
---help---
You'll have to say Y if your computer contains an NFC device that
diff --git a/drivers/nfc/pn544.c b/drivers/nfc/pn544.c
index bae6472..724f65d 100644
--- a/drivers/nfc/pn544.c
+++ b/drivers/nfc/pn544.c
@@ -60,7 +60,7 @@
struct pn544_info {
struct miscdevice miscdev;
struct i2c_client *i2c_dev;
- struct regulator_bulk_data regs[2];
+ struct regulator_bulk_data regs[3];
enum pn544_state state;
wait_queue_head_t read_wait;
@@ -74,6 +74,7 @@
static const char reg_vdd_io[] = "Vdd_IO";
static const char reg_vbat[] = "VBat";
+static const char reg_vsim[] = "VSim";
/* sysfs interface */
static ssize_t pn544_test(struct device *dev,
@@ -740,6 +741,7 @@
info->regs[0].supply = reg_vdd_io;
info->regs[1].supply = reg_vbat;
+ info->regs[2].supply = reg_vsim;
r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs),
info->regs);
if (r < 0)
diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c
index 28295d0..4d87b5d 100644
--- a/drivers/of/pdt.c
+++ b/drivers/of/pdt.c
@@ -36,19 +36,55 @@
(p)->unique_id = of_pdt_unique_id++; \
} while (0)
-static inline const char *of_pdt_node_name(struct device_node *dp)
+static char * __init of_pdt_build_full_name(struct device_node *dp)
{
- return dp->path_component_name;
+ int len, ourlen, plen;
+ char *n;
+
+ dp->path_component_name = build_path_component(dp);
+
+ plen = strlen(dp->parent->full_name);
+ ourlen = strlen(dp->path_component_name);
+ len = ourlen + plen + 2;
+
+ n = prom_early_alloc(len);
+ strcpy(n, dp->parent->full_name);
+ if (!of_node_is_root(dp->parent)) {
+ strcpy(n + plen, "/");
+ plen++;
+ }
+ strcpy(n + plen, dp->path_component_name);
+
+ return n;
}
-#else
+#else /* CONFIG_SPARC */
static inline void of_pdt_incr_unique_id(void *p) { }
static inline void irq_trans_init(struct device_node *dp) { }
-static inline const char *of_pdt_node_name(struct device_node *dp)
+static char * __init of_pdt_build_full_name(struct device_node *dp)
{
- return dp->name;
+ static int failsafe_id = 0; /* for generating unique names on failure */
+ char *buf;
+ int len;
+
+ if (of_pdt_prom_ops->pkg2path(dp->phandle, NULL, 0, &len))
+ goto failsafe;
+
+ buf = prom_early_alloc(len + 1);
+ if (of_pdt_prom_ops->pkg2path(dp->phandle, buf, len, &len))
+ goto failsafe;
+ return buf;
+
+ failsafe:
+ buf = prom_early_alloc(strlen(dp->parent->full_name) +
+ strlen(dp->name) + 16);
+ sprintf(buf, "%s/%s@unknown%i",
+ of_node_is_root(dp->parent) ? "" : dp->parent->full_name,
+ dp->name, failsafe_id++);
+ pr_err("%s: pkg2path failed; assigning %s\n", __func__, buf);
+ return buf;
}
#endif /* !CONFIG_SPARC */
@@ -132,47 +168,6 @@
return buf;
}
-static char * __init of_pdt_try_pkg2path(phandle node)
-{
- char *res, *buf = NULL;
- int len;
-
- if (!of_pdt_prom_ops->pkg2path)
- return NULL;
-
- if (of_pdt_prom_ops->pkg2path(node, buf, 0, &len))
- return NULL;
- buf = prom_early_alloc(len + 1);
- if (of_pdt_prom_ops->pkg2path(node, buf, len, &len)) {
- pr_err("%s: package-to-path failed\n", __func__);
- return NULL;
- }
-
- res = strrchr(buf, '/');
- if (!res) {
- pr_err("%s: couldn't find / in %s\n", __func__, buf);
- return NULL;
- }
- return res+1;
-}
-
-/*
- * When fetching the node's name, first try using package-to-path; if
- * that fails (either because the arch hasn't supplied a PROM callback,
- * or some other random failure), fall back to just looking at the node's
- * 'name' property.
- */
-static char * __init of_pdt_build_name(phandle node)
-{
- char *buf;
-
- buf = of_pdt_try_pkg2path(node);
- if (!buf)
- buf = of_pdt_get_one_property(node, "name");
-
- return buf;
-}
-
static struct device_node * __init of_pdt_create_node(phandle node,
struct device_node *parent)
{
@@ -187,7 +182,7 @@
kref_init(&dp->kref);
- dp->name = of_pdt_build_name(node);
+ dp->name = of_pdt_get_one_property(node, "name");
dp->type = of_pdt_get_one_property(node, "device_type");
dp->phandle = node;
@@ -198,26 +193,6 @@
return dp;
}
-static char * __init of_pdt_build_full_name(struct device_node *dp)
-{
- int len, ourlen, plen;
- char *n;
-
- plen = strlen(dp->parent->full_name);
- ourlen = strlen(of_pdt_node_name(dp));
- len = ourlen + plen + 2;
-
- n = prom_early_alloc(len);
- strcpy(n, dp->parent->full_name);
- if (!of_node_is_root(dp->parent)) {
- strcpy(n + plen, "/");
- plen++;
- }
- strcpy(n + plen, of_pdt_node_name(dp));
-
- return n;
-}
-
static struct device_node * __init of_pdt_build_tree(struct device_node *parent,
phandle node,
struct device_node ***nextp)
@@ -240,9 +215,6 @@
*(*nextp) = dp;
*nextp = &dp->allnext;
-#if defined(CONFIG_SPARC)
- dp->path_component_name = build_path_component(dp);
-#endif
dp->full_name = of_pdt_build_full_name(dp);
dp->child = of_pdt_build_tree(dp,
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 0bdda5b..42fbf1a 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -518,6 +518,8 @@
flags |= CONF_ENABLE_IOCARD;
if (flags & CONF_ENABLE_IOCARD)
s->socket.flags |= SS_IOCARD;
+ if (flags & CONF_ENABLE_ZVCARD)
+ s->socket.flags |= SS_ZVCARD | SS_IOCARD;
if (flags & CONF_ENABLE_SPKR) {
s->socket.flags |= SS_SPKR_ENA;
status = CCSR_AUDIO_ENA;
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 3755e7c..2c54054 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -215,7 +215,7 @@
}
#endif
-static void pxa2xx_configure_sockets(struct device *dev)
+void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;
/*
diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h
index bb62ea8..b609b45 100644
--- a/drivers/pcmcia/pxa2xx_base.h
+++ b/drivers/pcmcia/pxa2xx_base.h
@@ -1,3 +1,4 @@
int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
+void pxa2xx_configure_sockets(struct device *dev);
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index c3f7219..a520395 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -181,6 +181,9 @@
{
int ret;
+ if (!machine_is_colibri() && !machine_is_colibri320())
+ return -ENODEV;
+
colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!colibri_pcmcia_device)
return -ENOMEM;
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index b9f8c8f..25afe63 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -226,6 +226,7 @@
lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+ pxa2xx_configure_sockets(&sadev->dev);
ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
pxa2xx_drv_pcmcia_add_one);
}
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d163bc2..a59af5b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -227,7 +227,7 @@
config IDEAPAD_LAPTOP
tristate "Lenovo IdeaPad Laptop Extras"
depends on ACPI
- depends on RFKILL
+ depends on RFKILL && INPUT
select INPUT_SPARSEKMAP
help
This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index c5c4b8c..38b34a7 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -84,7 +84,7 @@
*/
#define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB"
#define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C"
-#define WMID_GUID1 "6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
+#define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
#define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A"
#define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
@@ -1280,7 +1280,7 @@
return -EINVAL;
return count;
}
-static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
set_bool_threeg);
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 4633fd8..fe49593 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1081,14 +1081,8 @@
struct proc_dir_entry *proc;
mode_t mode;
- /*
- * If parameter uid or gid is not changed, keep the default setting for
- * our proc entries (-rw-rw-rw-) else, it means we care about security,
- * and then set to -rw-rw----
- */
-
if ((asus_uid == 0) && (asus_gid == 0)) {
- mode = S_IFREG | S_IRUGO | S_IWUGO;
+ mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
printk(KERN_WARNING " asus_uid and asus_gid parameters are "
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 34657f9..ad24ef3 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -290,9 +290,12 @@
dell_send_request(buffer, 17, 11);
/* If the hardware switch controls this radio, and the hardware
- switch is disabled, don't allow changing the software state */
+ switch is disabled, don't allow changing the software state.
+ If the hardware switch is reported as not supported, always
+ fire the SMI to toggle the killswitch. */
if ((hwswitch_state & BIT(hwswitch_bit)) &&
- !(buffer->output[1] & BIT(16))) {
+ !(buffer->output[1] & BIT(16)) &&
+ (buffer->output[1] & BIT(0))) {
ret = -EINVAL;
goto out;
}
@@ -398,6 +401,23 @@
static void dell_update_rfkill(struct work_struct *ignored)
{
+ int status;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+ release_buffer();
+
+ /* if hardware rfkill is not supported, set it explicitly */
+ if (!(status & BIT(0))) {
+ if (wifi_rfkill)
+ dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
+ if (bluetooth_rfkill)
+ dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
+ if (wwan_rfkill)
+ dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
+ }
+
if (wifi_rfkill)
dell_rfkill_query(wifi_rfkill, (void *)1);
if (bluetooth_rfkill)
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 930e627..61433d4 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -60,69 +60,20 @@
#define GPOSW_DOU 0x08
#define GPOSW_RDRV 0x30
+#define GPIO_UPDATE_TYPE 0x80000000
#define NUM_GPIO 24
-struct pmic_gpio_irq {
- spinlock_t lock;
- u32 trigger[NUM_GPIO];
- u32 dirty;
- struct work_struct work;
-};
-
-
struct pmic_gpio {
+ struct mutex buslock;
struct gpio_chip chip;
- struct pmic_gpio_irq irqtypes;
void *gpiointr;
int irq;
unsigned irq_base;
+ unsigned int update_type;
+ u32 trigger_type;
};
-static void pmic_program_irqtype(int gpio, int type)
-{
- if (type & IRQ_TYPE_EDGE_RISING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static void pmic_irqtype_work(struct work_struct *work)
-{
- struct pmic_gpio_irq *t =
- container_of(work, struct pmic_gpio_irq, work);
- unsigned long flags;
- int i;
- u16 type;
-
- spin_lock_irqsave(&t->lock, flags);
- /* As we drop the lock, we may need multiple scans if we race the
- pmic_irq_type function */
- while (t->dirty) {
- /*
- * For each pin that has the dirty bit set send an IPC
- * message to configure the hardware via the PMIC
- */
- for (i = 0; i < NUM_GPIO; i++) {
- if (!(t->dirty & (1 << i)))
- continue;
- t->dirty &= ~(1 << i);
- /* We can't trust the array entry or dirty
- once the lock is dropped */
- type = t->trigger[i];
- spin_unlock_irqrestore(&t->lock, flags);
- pmic_program_irqtype(i, type);
- spin_lock_irqsave(&t->lock, flags);
- }
- }
- spin_unlock_irqrestore(&t->lock, flags);
-}
-
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
@@ -190,25 +141,24 @@
1 << (offset - 16));
}
-static int pmic_irq_type(unsigned irq, unsigned type)
+/*
+ * This is called from genirq with pg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int pmic_irq_type(struct irq_data *data, unsigned type)
{
- struct pmic_gpio *pg = get_irq_chip_data(irq);
- u32 gpio = irq - pg->irq_base;
- unsigned long flags;
+ struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+ u32 gpio = data->irq - pg->irq_base;
if (gpio >= pg->chip.ngpio)
return -EINVAL;
- spin_lock_irqsave(&pg->irqtypes.lock, flags);
- pg->irqtypes.trigger[gpio] = type;
- pg->irqtypes.dirty |= (1 << gpio);
- spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
- schedule_work(&pg->irqtypes.work);
+ pg->trigger_type = type;
+ pg->update_type = gpio | GPIO_UPDATE_TYPE;
return 0;
}
-
-
static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
@@ -217,38 +167,32 @@
}
/* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(unsigned irq)
-{
-};
+static void pmic_irq_unmask(struct irq_data *data) { }
-static void pmic_irq_mask(unsigned irq)
-{
-};
+static void pmic_irq_mask(struct irq_data *data) { }
static struct irq_chip pmic_irqchip = {
.name = "PMIC-GPIO",
- .mask = pmic_irq_mask,
- .unmask = pmic_irq_unmask,
- .set_type = pmic_irq_type,
+ .irq_mask = pmic_irq_mask,
+ .irq_unmask = pmic_irq_unmask,
+ .irq_set_type = pmic_irq_type,
};
-static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+static irqreturn_t pmic_irq_handler(int irq, void *data)
{
- struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+ struct pmic_gpio *pg = data;
u8 intsts = *((u8 *)pg->gpiointr + 4);
int gpio;
+ irqreturn_t ret = IRQ_NONE;
for (gpio = 0; gpio < 8; gpio++) {
if (intsts & (1 << gpio)) {
pr_debug("pmic pin %d triggered\n", gpio);
generic_handle_irq(pg->irq_base + gpio);
+ ret = IRQ_HANDLED;
}
}
-
- if (desc->chip->irq_eoi)
- desc->chip->irq_eoi(irq_get_irq_data(irq));
- else
- dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
+ return ret;
}
static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
@@ -297,8 +241,7 @@
pg->chip.can_sleep = 1;
pg->chip.dev = dev;
- INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
- spin_lock_init(&pg->irqtypes.lock);
+ mutex_init(&pg->buslock);
pg->chip.dev = dev;
retval = gpiochip_add(&pg->chip);
@@ -306,8 +249,13 @@
printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
goto err;
}
- set_irq_data(pg->irq, pg);
- set_irq_chained_handler(pg->irq, pmic_irq_handler);
+
+ retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
+ if (retval) {
+ printk(KERN_WARNING "pmic: Interrupt request failed\n");
+ goto err;
+ }
+
for (i = 0; i < 8; i++) {
set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
handle_simple_irq, "demux");
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 1fe0f1f..865ef78 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -162,7 +162,7 @@
return -EINVAL; \
return count; \
} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
show_bool_##value, set_bool_##value);
show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index dd59958..eb99223 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2275,16 +2275,12 @@
if (keycode != KEY_RESERVED) {
mutex_lock(&tpacpi_inputdev_send_mutex);
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 1);
- if (keycode == KEY_UNKNOWN)
- input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
- scancode);
input_sync(tpacpi_inputdev);
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 0);
- if (keycode == KEY_UNKNOWN)
- input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
- scancode);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
diff --git a/drivers/pps/generators/Kconfig b/drivers/pps/generators/Kconfig
index f3a73dd..e4c4f3d 100644
--- a/drivers/pps/generators/Kconfig
+++ b/drivers/pps/generators/Kconfig
@@ -6,7 +6,7 @@
config PPS_GENERATOR_PARPORT
tristate "Parallel port PPS signal generator"
- depends on PARPORT
+ depends on PARPORT && BROKEN
help
If you say yes here you get support for a PPS signal generator which
utilizes STROBE pin of a parallel port to send PPS signals. It uses
diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c
index cba1b43..a4e8eb9 100644
--- a/drivers/pps/kapi.c
+++ b/drivers/pps/kapi.c
@@ -168,7 +168,7 @@
{
unsigned long flags;
int captured = 0;
- struct pps_ktime ts_real;
+ struct pps_ktime ts_real = { .sec = 0, .nsec = 0, .flags = 0 };
/* check event type */
BUG_ON((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 76b4185..1269fbd 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -77,9 +77,9 @@
/* Several chips lock up trying to read undefined config space */
if (capable(CAP_SYS_ADMIN))
- size = 0x200000;
+ size = RIO_MAINT_SPACE_SZ;
- if (off > size)
+ if (off >= size)
return 0;
if (off + count > size) {
size -= off;
@@ -147,10 +147,10 @@
loff_t init_off = off;
u8 *data = (u8 *) buf;
- if (off > 0x200000)
+ if (off >= RIO_MAINT_SPACE_SZ)
return 0;
- if (off + count > 0x200000) {
- size = 0x200000 - off;
+ if (off + count > RIO_MAINT_SPACE_SZ) {
+ size = RIO_MAINT_SPACE_SZ - off;
count = size;
}
@@ -200,7 +200,7 @@
.name = "config",
.mode = S_IRUGO | S_IWUSR,
},
- .size = 0x200000,
+ .size = RIO_MAINT_SPACE_SZ,
.read = rio_read_config,
.write = rio_write_config,
};
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index f53d31b..2bb5de1 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -174,7 +174,7 @@
dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val);
- BUG_ON(val < 0 || val > mc13xxx_regulators[id].desc.n_voltages);
+ BUG_ON(val > mc13xxx_regulators[id].desc.n_voltages);
return mc13xxx_regulators[id].voltages[val];
}
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 8b0d2c4..06df898 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -120,6 +120,7 @@
return REGULATOR_MODE_IDLE;
default:
BUG();
+ return -EINVAL;
}
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cdd9719..4941cad 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -97,6 +97,18 @@
If unsure, say Y.
+config RTC_INTF_DEV_UIE_EMUL
+ bool "RTC UIE emulation on dev interface"
+ depends on RTC_INTF_DEV
+ help
+ Provides an emulation for RTC_UIE if the underlying rtc chip
+ driver does not expose RTC_UIE ioctls. Those requests generate
+ once-per-second update interrupts, used for synchronization.
+
+ The emulation code will read the time from the hardware
+ clock several times per second, please enable this option
+ only if you know that you really need it.
+
config RTC_DRV_TEST
tristate "Test driver/device"
help
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index a0c0196..cb2f072 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -209,9 +209,8 @@
}
if (err)
- return err;
-
- if (!rtc->ops)
+ /* nothing */;
+ else if (!rtc->ops)
err = -ENODEV;
else if (!rtc->ops->alarm_irq_enable)
err = -EINVAL;
@@ -229,6 +228,12 @@
if (err)
return err;
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+ if (enabled == 0 && rtc->uie_irq_active) {
+ mutex_unlock(&rtc->ops_lock);
+ return rtc_dev_update_irq_enable_emul(rtc, 0);
+ }
+#endif
/* make sure we're changing state */
if (rtc->uie_rtctimer.enabled == enabled)
goto out;
@@ -248,6 +253,16 @@
out:
mutex_unlock(&rtc->ops_lock);
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+ /*
+ * Enable emulation if the driver did not provide
+ * the update_irq_enable function pointer or if returned
+ * -EINVAL to signal that it has been configured without
+ * interrupts or that are not available at the moment.
+ */
+ if (err == -EINVAL)
+ err = rtc_dev_update_irq_enable_emul(rtc, enabled);
+#endif
return err;
}
@@ -263,7 +278,7 @@
*
* Triggers the registered irq_task function callback.
*/
-static void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode)
+void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode)
{
unsigned long flags;
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index c36749e..5469c52 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -309,7 +309,7 @@
.read_alarm = at91_rtc_readalarm,
.set_alarm = at91_rtc_setalarm,
.proc = at91_rtc_proc,
- .alarm_irq_enabled = at91_rtc_alarm_irq_enable,
+ .alarm_irq_enable = at91_rtc_alarm_irq_enable,
};
/*
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 37c3cc1..d0e06ed 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -46,6 +46,105 @@
return err;
}
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+/*
+ * Routine to poll RTC seconds field for change as often as possible,
+ * after first RTC_UIE use timer to reduce polling
+ */
+static void rtc_uie_task(struct work_struct *work)
+{
+ struct rtc_device *rtc =
+ container_of(work, struct rtc_device, uie_task);
+ struct rtc_time tm;
+ int num = 0;
+ int err;
+
+ err = rtc_read_time(rtc, &tm);
+
+ spin_lock_irq(&rtc->irq_lock);
+ if (rtc->stop_uie_polling || err) {
+ rtc->uie_task_active = 0;
+ } else if (rtc->oldsecs != tm.tm_sec) {
+ num = (tm.tm_sec + 60 - rtc->oldsecs) % 60;
+ rtc->oldsecs = tm.tm_sec;
+ rtc->uie_timer.expires = jiffies + HZ - (HZ/10);
+ rtc->uie_timer_active = 1;
+ rtc->uie_task_active = 0;
+ add_timer(&rtc->uie_timer);
+ } else if (schedule_work(&rtc->uie_task) == 0) {
+ rtc->uie_task_active = 0;
+ }
+ spin_unlock_irq(&rtc->irq_lock);
+ if (num)
+ rtc_handle_legacy_irq(rtc, num, RTC_UF);
+}
+static void rtc_uie_timer(unsigned long data)
+{
+ struct rtc_device *rtc = (struct rtc_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc->irq_lock, flags);
+ rtc->uie_timer_active = 0;
+ rtc->uie_task_active = 1;
+ if ((schedule_work(&rtc->uie_task) == 0))
+ rtc->uie_task_active = 0;
+ spin_unlock_irqrestore(&rtc->irq_lock, flags);
+}
+
+static int clear_uie(struct rtc_device *rtc)
+{
+ spin_lock_irq(&rtc->irq_lock);
+ if (rtc->uie_irq_active) {
+ rtc->stop_uie_polling = 1;
+ if (rtc->uie_timer_active) {
+ spin_unlock_irq(&rtc->irq_lock);
+ del_timer_sync(&rtc->uie_timer);
+ spin_lock_irq(&rtc->irq_lock);
+ rtc->uie_timer_active = 0;
+ }
+ if (rtc->uie_task_active) {
+ spin_unlock_irq(&rtc->irq_lock);
+ flush_scheduled_work();
+ spin_lock_irq(&rtc->irq_lock);
+ }
+ rtc->uie_irq_active = 0;
+ }
+ spin_unlock_irq(&rtc->irq_lock);
+ return 0;
+}
+
+static int set_uie(struct rtc_device *rtc)
+{
+ struct rtc_time tm;
+ int err;
+
+ err = rtc_read_time(rtc, &tm);
+ if (err)
+ return err;
+ spin_lock_irq(&rtc->irq_lock);
+ if (!rtc->uie_irq_active) {
+ rtc->uie_irq_active = 1;
+ rtc->stop_uie_polling = 0;
+ rtc->oldsecs = tm.tm_sec;
+ rtc->uie_task_active = 1;
+ if (schedule_work(&rtc->uie_task) == 0)
+ rtc->uie_task_active = 0;
+ }
+ rtc->irq_data = 0;
+ spin_unlock_irq(&rtc->irq_lock);
+ return 0;
+}
+
+int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc, unsigned int enabled)
+{
+ if (enabled)
+ return set_uie(rtc);
+ else
+ return clear_uie(rtc);
+}
+EXPORT_SYMBOL(rtc_dev_update_irq_enable_emul);
+
+#endif /* CONFIG_RTC_INTF_DEV_UIE_EMUL */
static ssize_t
rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
@@ -387,6 +486,11 @@
rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id);
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+ INIT_WORK(&rtc->uie_task, rtc_uie_task);
+ setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc);
+#endif
+
cdev_init(&rtc->char_dev, &rtc_dev_fops);
rtc->char_dev.owner = rtc->owner;
}
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 23a9ee1..9507354 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -1,7 +1,7 @@
/*
* RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C
*
- * Copyright (C) 2009-2010 Freescale Semiconductor.
+ * Copyright (C) 2009-2011 Freescale Semiconductor.
* Author: Jack Lan <jack.lan@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
@@ -141,9 +141,11 @@
time->tm_hour = bcd2bin(hour);
}
- time->tm_wday = bcd2bin(week);
+ /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+ time->tm_wday = bcd2bin(week) - 1;
time->tm_mday = bcd2bin(day);
- time->tm_mon = bcd2bin(month & 0x7F);
+ /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+ time->tm_mon = bcd2bin(month & 0x7F) - 1;
if (century)
add_century = 100;
@@ -162,9 +164,11 @@
buf[0] = bin2bcd(time->tm_sec);
buf[1] = bin2bcd(time->tm_min);
buf[2] = bin2bcd(time->tm_hour);
- buf[3] = bin2bcd(time->tm_wday); /* Day of the week */
+ /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
+ buf[3] = bin2bcd(time->tm_wday + 1);
buf[4] = bin2bcd(time->tm_mday); /* Date */
- buf[5] = bin2bcd(time->tm_mon);
+ /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
+ buf[5] = bin2bcd(time->tm_mon + 1);
if (time->tm_year >= 100) {
buf[5] |= 0x80;
buf[6] = bin2bcd(time->tm_year - 100);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index cf953ec..b80fa28 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -77,18 +77,20 @@
}
/* Update control registers */
-static void s3c_rtc_setaie(int to)
+static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
{
unsigned int tmp;
- pr_debug("%s: aie=%d\n", __func__, to);
+ pr_debug("%s: aie=%d\n", __func__, enabled);
tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
- if (to)
+ if (enabled)
tmp |= S3C2410_RTCALM_ALMEN;
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
+
+ return 0;
}
static int s3c_rtc_setpie(struct device *dev, int enabled)
@@ -308,7 +310,7 @@
writeb(alrm_en, base + S3C2410_RTCALM);
- s3c_rtc_setaie(alrm->enabled);
+ s3c_rtc_setaie(dev, alrm->enabled);
return 0;
}
@@ -440,7 +442,7 @@
rtc_device_unregister(rtc);
s3c_rtc_setpie(&dev->dev, 0);
- s3c_rtc_setaie(0);
+ s3c_rtc_setaie(&dev->dev, 0);
clk_disable(rtc_clk);
clk_put(rtc_clk);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d..a9fe23d 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@
static struct ccw_device_id dasd_eckd_ids[] = {
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
- { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+ { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index c881a14..1f6a4d8 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -62,8 +62,8 @@
/*
* Parameter parsing functions.
*/
-static int __initdata devs = XPRAM_DEVS;
-static char __initdata *sizes[XPRAM_MAX_DEVS];
+static int devs = XPRAM_DEVS;
+static char *sizes[XPRAM_MAX_DEVS];
module_param(devs, int, 0);
module_param_array(sizes, charp, NULL, 0);
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 8cd58e4..5ad44da 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -460,7 +460,8 @@
unsigned int cmd, unsigned long arg)
{
void __user *argp;
- int ct, perm;
+ unsigned int ct;
+ int perm;
argp = (void __user *)arg;
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index 7a242f0..267b54e 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -280,6 +280,14 @@
return rc;
}
+static inline void
+tape_do_io_async_free(struct tape_device *device, struct tape_request *request)
+{
+ request->callback = (void *) tape_free_request;
+ request->callback_data = NULL;
+ tape_do_io_async(device, request);
+}
+
extern int tape_oper_handler(int irq, int status);
extern void tape_noper_handler(int irq, int status);
extern int tape_open(struct tape_device *);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index c17f35b..c265111 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -53,23 +53,11 @@
* Medium sense for 34xx tapes. There is no 'real' medium sense call.
* So we just do a normal sense.
*/
-static int
-tape_34xx_medium_sense(struct tape_device *device)
+static void __tape_34xx_medium_sense(struct tape_request *request)
{
- struct tape_request *request;
- unsigned char *sense;
- int rc;
+ struct tape_device *device = request->device;
+ unsigned char *sense;
- request = tape_alloc_request(1, 32);
- if (IS_ERR(request)) {
- DBF_EXCEPTION(6, "MSEN fail\n");
- return PTR_ERR(request);
- }
-
- request->op = TO_MSEN;
- tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
-
- rc = tape_do_io_interruptible(device, request);
if (request->rc == 0) {
sense = request->cpdata;
@@ -88,15 +76,47 @@
device->tape_generic_status |= GMT_WR_PROT(~0);
else
device->tape_generic_status &= ~GMT_WR_PROT(~0);
- } else {
+ } else
DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n",
request->rc);
- }
tape_free_request(request);
+}
+static int tape_34xx_medium_sense(struct tape_device *device)
+{
+ struct tape_request *request;
+ int rc;
+
+ request = tape_alloc_request(1, 32);
+ if (IS_ERR(request)) {
+ DBF_EXCEPTION(6, "MSEN fail\n");
+ return PTR_ERR(request);
+ }
+
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+ rc = tape_do_io_interruptible(device, request);
+ __tape_34xx_medium_sense(request);
return rc;
}
+static void tape_34xx_medium_sense_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = tape_alloc_request(1, 32);
+ if (IS_ERR(request)) {
+ DBF_EXCEPTION(6, "MSEN fail\n");
+ return;
+ }
+
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+ request->callback = (void *) __tape_34xx_medium_sense;
+ request->callback_data = NULL;
+ tape_do_io_async(device, request);
+}
+
struct tape_34xx_work {
struct tape_device *device;
enum tape_op op;
@@ -109,6 +129,9 @@
* is inserted but cannot call tape_do_io* from an interrupt context.
* Maybe that's useful for other actions we want to start from the
* interrupt handler.
+ * Note: the work handler is called by the system work queue. The tape
+ * commands started by the handler need to be asynchrounous, otherwise
+ * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
*/
static void
tape_34xx_work_handler(struct work_struct *work)
@@ -119,7 +142,7 @@
switch(p->op) {
case TO_MSEN:
- tape_34xx_medium_sense(device);
+ tape_34xx_medium_sense_async(device);
break;
default:
DBF_EVENT(3, "T34XX: internal error: unknown work\n");
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index fbe361f..de2e99e 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -329,17 +329,17 @@
/*
* Enable encryption
*/
-static int tape_3592_enable_crypt(struct tape_device *device)
+static struct tape_request *__tape_3592_enable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_enable_crypt\n");
if (!crypt_supported(device))
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return request;
data = request->cpdata;
memset(data,0,72);
@@ -354,23 +354,42 @@
request->op = TO_CRYPT_ON;
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+ return request;
+}
+
+static int tape_3592_enable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_enable_crypt(device);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
return tape_do_io_free(device, request);
}
+static void tape_3592_enable_crypt_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_enable_crypt(device);
+ if (!IS_ERR(request))
+ tape_do_io_async_free(device, request);
+}
+
/*
* Disable encryption
*/
-static int tape_3592_disable_crypt(struct tape_device *device)
+static struct tape_request *__tape_3592_disable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_disable_crypt\n");
if (!crypt_supported(device))
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return request;
data = request->cpdata;
memset(data,0,72);
@@ -383,9 +402,28 @@
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+ return request;
+}
+
+static int tape_3592_disable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_disable_crypt(device);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
return tape_do_io_free(device, request);
}
+static void tape_3592_disable_crypt_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_disable_crypt(device);
+ if (!IS_ERR(request))
+ tape_do_io_async_free(device, request);
+}
+
/*
* IOCTL: Set encryption status
*/
@@ -457,8 +495,7 @@
/*
* SENSE Medium: Get Sense data about medium state
*/
-static int
-tape_3590_sense_medium(struct tape_device *device)
+static int tape_3590_sense_medium(struct tape_device *device)
{
struct tape_request *request;
@@ -470,6 +507,18 @@
return tape_do_io_free(device, request);
}
+static void tape_3590_sense_medium_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = tape_alloc_request(1, 128);
+ if (IS_ERR(request))
+ return;
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata);
+ tape_do_io_async_free(device, request);
+}
+
/*
* MTTELL: Tell block. Return the number of block relative to current file.
*/
@@ -546,15 +595,14 @@
* 2. The attention msg is written to the "read subsystem data" buffer.
* In this case we probably should print it to the console.
*/
-static int
-tape_3590_read_attmsg(struct tape_device *device)
+static void tape_3590_read_attmsg_async(struct tape_device *device)
{
struct tape_request *request;
char *buf;
request = tape_alloc_request(3, 4096);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return;
request->op = TO_READ_ATTMSG;
buf = request->cpdata;
buf[0] = PREP_RD_SS_DATA;
@@ -562,12 +610,15 @@
tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf);
tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12);
tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
- return tape_do_io_free(device, request);
+ tape_do_io_async_free(device, request);
}
/*
* These functions are used to schedule follow-up actions from within an
* interrupt context (like unsolicited interrupts).
+ * Note: the work handler is called by the system work queue. The tape
+ * commands started by the handler need to be asynchrounous, otherwise
+ * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
*/
struct work_handler_data {
struct tape_device *device;
@@ -583,16 +634,16 @@
switch (p->op) {
case TO_MSEN:
- tape_3590_sense_medium(p->device);
+ tape_3590_sense_medium_async(p->device);
break;
case TO_READ_ATTMSG:
- tape_3590_read_attmsg(p->device);
+ tape_3590_read_attmsg_async(p->device);
break;
case TO_CRYPT_ON:
- tape_3592_enable_crypt(p->device);
+ tape_3592_enable_crypt_async(p->device);
break;
case TO_CRYPT_OFF:
- tape_3592_disable_crypt(p->device);
+ tape_3592_disable_crypt_async(p->device);
break;
default:
DBF_EVENT(3, "T3590: work handler undefined for "
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 44578b5..d3e58d7 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1561,6 +1561,7 @@
{
struct Scsi_Host *host = rport_to_shost(rport);
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ unsigned long flags;
if (!fcport)
return;
@@ -1573,10 +1574,10 @@
* Transport has effectively 'deleted' the rport, clear
* all local references.
*/
- spin_lock_irq(host->host_lock);
+ spin_lock_irqsave(host->host_lock, flags);
fcport->rport = fcport->drport = NULL;
*((fc_port_t **)rport->dd_data) = NULL;
- spin_unlock_irq(host->host_lock);
+ spin_unlock_irqrestore(host->host_lock, flags);
if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
return;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f948e1a..d9479c3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2505,11 +2505,12 @@
{
fc_port_t *fcport = data;
struct fc_rport *rport;
+ unsigned long flags;
- spin_lock_irq(fcport->vha->host->host_lock);
+ spin_lock_irqsave(fcport->vha->host->host_lock, flags);
rport = fcport->drport ? fcport->drport: fcport->rport;
fcport->drport = NULL;
- spin_unlock_irq(fcport->vha->host->host_lock);
+ spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
if (rport)
fc_remote_port_delete(rport);
}
@@ -2879,6 +2880,7 @@
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
struct qla_hw_data *ha = vha->hw;
+ unsigned long flags;
qla2x00_rport_del(fcport);
@@ -2893,9 +2895,9 @@
"Unable to allocate fc remote port!\n");
return;
}
- spin_lock_irq(fcport->vha->host->host_lock);
+ spin_lock_irqsave(fcport->vha->host->host_lock, flags);
*((fc_port_t **)rport->dd_data) = fcport;
- spin_unlock_irq(fcport->vha->host->host_lock);
+ spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
rport->supported_classes = fcport->supported_classes;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c194c23..f27724d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -562,7 +562,6 @@
}
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
- atomic_read(&fcport->state) == FCS_DEVICE_LOST ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
@@ -2513,6 +2512,7 @@
{
struct fc_rport *rport;
scsi_qla_host_t *base_vha;
+ unsigned long flags;
if (!fcport->rport)
return;
@@ -2520,9 +2520,9 @@
rport = fcport->rport;
if (defer) {
base_vha = pci_get_drvdata(vha->hw->pdev);
- spin_lock_irq(vha->host->host_lock);
+ spin_lock_irqsave(vha->host->host_lock, flags);
fcport->drport = rport;
- spin_unlock_irq(vha->host->host_lock);
+ spin_unlock_irqrestore(vha->host->host_lock, flags);
set_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(base_vha);
} else
@@ -3282,10 +3282,10 @@
set_user_nice(current, -20);
+ set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
- set_current_state(TASK_INTERRUPTIBLE);
schedule();
__set_current_state(TASK_RUNNING);
@@ -3454,7 +3454,9 @@
qla2x00_do_dpc_all_vps(base_vha);
ha->dpc_active = 0;
+ set_current_state(TASK_INTERRUPTIBLE);
} /* End of while(1) */
+ __set_current_state(TASK_RUNNING);
DEBUG(printk("scsi(%ld): DPC handler exiting\n", base_vha->host_no));
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 7b31093..a6b2d72 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1671,7 +1671,7 @@
unsigned long long lba, unsigned int num, int write)
{
int ret;
- unsigned int block, rest = 0;
+ unsigned long long block, rest = 0;
int (*func)(struct scsi_cmnd *, unsigned char *, int);
func = write ? fetch_to_dev_buffer : fill_from_dev_buffer;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9045c52..fb2bb35 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -443,7 +443,7 @@
&sdev->request_queue->queue_flags);
if (flagset)
queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue);
- __blk_run_queue(sdev->request_queue);
+ __blk_run_queue(sdev->request_queue, false);
if (flagset)
queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue);
spin_unlock(sdev->request_queue->queue_lock);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 998c01b..5c3ccfc 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3829,7 +3829,7 @@
!test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
if (flagset)
queue_flag_set(QUEUE_FLAG_REENTER, rport->rqst_q);
- __blk_run_queue(rport->rqst_q);
+ __blk_run_queue(rport->rqst_q, false);
if (flagset)
queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
index 351d8a3..19752b0 100644
--- a/drivers/spi/pxa2xx_spi_pci.c
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -7,10 +7,9 @@
#include <linux/of_device.h>
#include <linux/spi/pxa2xx_spi.h>
-struct awesome_struct {
+struct ce4100_info {
struct ssp_device ssp;
- struct platform_device spi_pdev;
- struct pxa2xx_spi_master spi_pdata;
+ struct platform_device *spi_pdev;
};
static DEFINE_MUTEX(ssp_lock);
@@ -51,23 +50,15 @@
}
EXPORT_SYMBOL_GPL(pxa_ssp_free);
-static void plat_dev_release(struct device *dev)
-{
- struct awesome_struct *as = container_of(dev,
- struct awesome_struct, spi_pdev.dev);
-
- of_device_node_put(&as->spi_pdev.dev);
-}
-
static int __devinit ce4100_spi_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int ret;
resource_size_t phys_beg;
resource_size_t phys_len;
- struct awesome_struct *spi_info;
+ struct ce4100_info *spi_info;
struct platform_device *pdev;
- struct pxa2xx_spi_master *spi_pdata;
+ struct pxa2xx_spi_master spi_pdata;
struct ssp_device *ssp;
ret = pci_enable_device(dev);
@@ -84,33 +75,30 @@
return ret;
}
+ pdev = platform_device_alloc("pxa2xx-spi", dev->devfn);
spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
- if (!spi_info) {
+ if (!pdev || !spi_info ) {
ret = -ENOMEM;
- goto err_kz;
+ goto err_nomem;
}
- ssp = &spi_info->ssp;
- pdev = &spi_info->spi_pdev;
- spi_pdata = &spi_info->spi_pdata;
+ memset(&spi_pdata, 0, sizeof(spi_pdata));
+ spi_pdata.num_chipselect = dev->devfn;
- pdev->name = "pxa2xx-spi";
- pdev->id = dev->devfn;
+ ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata));
+ if (ret)
+ goto err_nomem;
+
pdev->dev.parent = &dev->dev;
- pdev->dev.platform_data = &spi_info->spi_pdata;
-
#ifdef CONFIG_OF
pdev->dev.of_node = dev->dev.of_node;
#endif
- pdev->dev.release = plat_dev_release;
-
- spi_pdata->num_chipselect = dev->devfn;
-
+ ssp = &spi_info->ssp;
ssp->phys_base = pci_resource_start(dev, 0);
ssp->mmio_base = ioremap(phys_beg, phys_len);
if (!ssp->mmio_base) {
dev_err(&pdev->dev, "failed to ioremap() registers\n");
ret = -EIO;
- goto err_remap;
+ goto err_nomem;
}
ssp->irq = dev->irq;
ssp->port_id = pdev->id;
@@ -122,7 +110,7 @@
pci_set_drvdata(dev, spi_info);
- ret = platform_device_register(pdev);
+ ret = platform_device_add(pdev);
if (ret)
goto err_dev_add;
@@ -135,27 +123,21 @@
mutex_unlock(&ssp_lock);
iounmap(ssp->mmio_base);
-err_remap:
- kfree(spi_info);
-
-err_kz:
+err_nomem:
release_mem_region(phys_beg, phys_len);
-
+ platform_device_put(pdev);
+ kfree(spi_info);
return ret;
}
static void __devexit ce4100_spi_remove(struct pci_dev *dev)
{
- struct awesome_struct *spi_info;
- struct platform_device *pdev;
+ struct ce4100_info *spi_info;
struct ssp_device *ssp;
spi_info = pci_get_drvdata(dev);
-
ssp = &spi_info->ssp;
- pdev = &spi_info->spi_pdev;
-
- platform_device_unregister(pdev);
+ platform_device_unregister(spi_info->spi_pdev);
iounmap(ssp->mmio_base);
release_mem_region(pci_resource_start(dev, 0),
@@ -171,7 +153,6 @@
}
static struct pci_device_id ce4100_spi_devices[] __devinitdata = {
-
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
{ },
};
diff --git a/drivers/target/Makefile b/drivers/target/Makefile
index 5cfd708..973bb19 100644
--- a/drivers/target/Makefile
+++ b/drivers/target/Makefile
@@ -13,8 +13,7 @@
target_core_transport.o \
target_core_cdb.o \
target_core_ua.o \
- target_core_rd.o \
- target_core_mib.o
+ target_core_rd.o
obj-$(CONFIG_TARGET_CORE) += target_core_mod.o
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 2764510..caf8dc1 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -37,7 +37,6 @@
#include <linux/parser.h>
#include <linux/syscalls.h>
#include <linux/configfs.h>
-#include <linux/proc_fs.h>
#include <target/target_core_base.h>
#include <target/target_core_device.h>
@@ -1971,13 +1970,35 @@
{
struct se_subsystem_dev *se_dev = container_of(to_config_group(item),
struct se_subsystem_dev, se_dev_group);
- struct config_group *dev_cg;
+ struct se_hba *hba = item_to_hba(&se_dev->se_dev_hba->hba_group.cg_item);
+ struct se_subsystem_api *t = hba->transport;
+ struct config_group *dev_cg = &se_dev->se_dev_group;
- if (!(se_dev))
- return;
-
- dev_cg = &se_dev->se_dev_group;
kfree(dev_cg->default_groups);
+ /*
+ * This pointer will set when the storage is enabled with:
+ *`echo 1 > $CONFIGFS/core/$HBA/$DEV/dev_enable`
+ */
+ if (se_dev->se_dev_ptr) {
+ printk(KERN_INFO "Target_Core_ConfigFS: Calling se_free_"
+ "virtual_device() for se_dev_ptr: %p\n",
+ se_dev->se_dev_ptr);
+
+ se_free_virtual_device(se_dev->se_dev_ptr, hba);
+ } else {
+ /*
+ * Release struct se_subsystem_dev->se_dev_su_ptr..
+ */
+ printk(KERN_INFO "Target_Core_ConfigFS: Calling t->free_"
+ "device() for se_dev_su_ptr: %p\n",
+ se_dev->se_dev_su_ptr);
+
+ t->free_device(se_dev->se_dev_su_ptr);
+ }
+
+ printk(KERN_INFO "Target_Core_ConfigFS: Deallocating se_subsystem"
+ "_dev_t: %p\n", se_dev);
+ kfree(se_dev);
}
static ssize_t target_core_dev_show(struct config_item *item,
@@ -2140,7 +2161,16 @@
NULL,
};
+static void target_core_alua_lu_gp_release(struct config_item *item)
+{
+ struct t10_alua_lu_gp *lu_gp = container_of(to_config_group(item),
+ struct t10_alua_lu_gp, lu_gp_group);
+
+ core_alua_free_lu_gp(lu_gp);
+}
+
static struct configfs_item_operations target_core_alua_lu_gp_ops = {
+ .release = target_core_alua_lu_gp_release,
.show_attribute = target_core_alua_lu_gp_attr_show,
.store_attribute = target_core_alua_lu_gp_attr_store,
};
@@ -2191,9 +2221,11 @@
printk(KERN_INFO "Target_Core_ConfigFS: Releasing ALUA Logical Unit"
" Group: core/alua/lu_gps/%s, ID: %hu\n",
config_item_name(item), lu_gp->lu_gp_id);
-
+ /*
+ * core_alua_free_lu_gp() is called from target_core_alua_lu_gp_ops->release()
+ * -> target_core_alua_lu_gp_release()
+ */
config_item_put(item);
- core_alua_free_lu_gp(lu_gp);
}
static struct configfs_group_operations target_core_alua_lu_gps_group_ops = {
@@ -2549,7 +2581,16 @@
NULL,
};
+static void target_core_alua_tg_pt_gp_release(struct config_item *item)
+{
+ struct t10_alua_tg_pt_gp *tg_pt_gp = container_of(to_config_group(item),
+ struct t10_alua_tg_pt_gp, tg_pt_gp_group);
+
+ core_alua_free_tg_pt_gp(tg_pt_gp);
+}
+
static struct configfs_item_operations target_core_alua_tg_pt_gp_ops = {
+ .release = target_core_alua_tg_pt_gp_release,
.show_attribute = target_core_alua_tg_pt_gp_attr_show,
.store_attribute = target_core_alua_tg_pt_gp_attr_store,
};
@@ -2602,9 +2643,11 @@
printk(KERN_INFO "Target_Core_ConfigFS: Releasing ALUA Target Port"
" Group: alua/tg_pt_gps/%s, ID: %hu\n",
config_item_name(item), tg_pt_gp->tg_pt_gp_id);
-
+ /*
+ * core_alua_free_tg_pt_gp() is called from target_core_alua_tg_pt_gp_ops->release()
+ * -> target_core_alua_tg_pt_gp_release().
+ */
config_item_put(item);
- core_alua_free_tg_pt_gp(tg_pt_gp);
}
static struct configfs_group_operations target_core_alua_tg_pt_gps_group_ops = {
@@ -2771,13 +2814,11 @@
struct se_subsystem_api *t;
struct config_item *df_item;
struct config_group *dev_cg, *tg_pt_gp_cg;
- int i, ret;
+ int i;
hba = item_to_hba(&se_dev->se_dev_hba->hba_group.cg_item);
- if (mutex_lock_interruptible(&hba->hba_access_mutex))
- goto out;
-
+ mutex_lock(&hba->hba_access_mutex);
t = hba->transport;
spin_lock(&se_global->g_device_lock);
@@ -2791,7 +2832,10 @@
config_item_put(df_item);
}
kfree(tg_pt_gp_cg->default_groups);
- core_alua_free_tg_pt_gp(T10_ALUA(se_dev)->default_tg_pt_gp);
+ /*
+ * core_alua_free_tg_pt_gp() is called from ->default_tg_pt_gp
+ * directly from target_core_alua_tg_pt_gp_release().
+ */
T10_ALUA(se_dev)->default_tg_pt_gp = NULL;
dev_cg = &se_dev->se_dev_group;
@@ -2800,38 +2844,12 @@
dev_cg->default_groups[i] = NULL;
config_item_put(df_item);
}
-
- config_item_put(item);
/*
- * This pointer will set when the storage is enabled with:
- * `echo 1 > $CONFIGFS/core/$HBA/$DEV/dev_enable`
+ * The releasing of se_dev and associated se_dev->se_dev_ptr is done
+ * from target_core_dev_item_ops->release() ->target_core_dev_release().
*/
- if (se_dev->se_dev_ptr) {
- printk(KERN_INFO "Target_Core_ConfigFS: Calling se_free_"
- "virtual_device() for se_dev_ptr: %p\n",
- se_dev->se_dev_ptr);
-
- ret = se_free_virtual_device(se_dev->se_dev_ptr, hba);
- if (ret < 0)
- goto hba_out;
- } else {
- /*
- * Release struct se_subsystem_dev->se_dev_su_ptr..
- */
- printk(KERN_INFO "Target_Core_ConfigFS: Calling t->free_"
- "device() for se_dev_su_ptr: %p\n",
- se_dev->se_dev_su_ptr);
-
- t->free_device(se_dev->se_dev_su_ptr);
- }
-
- printk(KERN_INFO "Target_Core_ConfigFS: Deallocating se_subsystem"
- "_dev_t: %p\n", se_dev);
-
-hba_out:
+ config_item_put(item);
mutex_unlock(&hba->hba_access_mutex);
-out:
- kfree(se_dev);
}
static struct configfs_group_operations target_core_hba_group_ops = {
@@ -2914,6 +2932,13 @@
CONFIGFS_EATTR_OPS(target_core_hba, se_hba, hba_group);
+static void target_core_hba_release(struct config_item *item)
+{
+ struct se_hba *hba = container_of(to_config_group(item),
+ struct se_hba, hba_group);
+ core_delete_hba(hba);
+}
+
static struct configfs_attribute *target_core_hba_attrs[] = {
&target_core_hba_hba_info.attr,
&target_core_hba_hba_mode.attr,
@@ -2921,6 +2946,7 @@
};
static struct configfs_item_operations target_core_hba_item_ops = {
+ .release = target_core_hba_release,
.show_attribute = target_core_hba_attr_show,
.store_attribute = target_core_hba_attr_store,
};
@@ -2997,10 +3023,11 @@
struct config_group *group,
struct config_item *item)
{
- struct se_hba *hba = item_to_hba(item);
-
+ /*
+ * core_delete_hba() is called from target_core_hba_item_ops->release()
+ * -> target_core_hba_release()
+ */
config_item_put(item);
- core_delete_hba(hba);
}
static struct configfs_group_operations target_core_group_ops = {
@@ -3022,7 +3049,6 @@
struct config_group *target_cg, *hba_cg = NULL, *alua_cg = NULL;
struct config_group *lu_gp_cg = NULL;
struct configfs_subsystem *subsys;
- struct proc_dir_entry *scsi_target_proc = NULL;
struct t10_alua_lu_gp *lu_gp;
int ret;
@@ -3128,21 +3154,10 @@
if (core_dev_setup_virtual_lun0() < 0)
goto out;
- scsi_target_proc = proc_mkdir("scsi_target", 0);
- if (!(scsi_target_proc)) {
- printk(KERN_ERR "proc_mkdir(scsi_target, 0) failed\n");
- goto out;
- }
- ret = init_scsi_target_mib();
- if (ret < 0)
- goto out;
-
return 0;
out:
configfs_unregister_subsystem(subsys);
- if (scsi_target_proc)
- remove_proc_entry("scsi_target", 0);
core_dev_release_virtual_lun0();
rd_module_exit();
out_global:
@@ -3178,8 +3193,7 @@
config_item_put(item);
}
kfree(lu_gp_cg->default_groups);
- core_alua_free_lu_gp(se_global->default_lu_gp);
- se_global->default_lu_gp = NULL;
+ lu_gp_cg->default_groups = NULL;
alua_cg = &se_global->alua_group;
for (i = 0; alua_cg->default_groups[i]; i++) {
@@ -3188,6 +3202,7 @@
config_item_put(item);
}
kfree(alua_cg->default_groups);
+ alua_cg->default_groups = NULL;
hba_cg = &se_global->target_core_hbagroup;
for (i = 0; hba_cg->default_groups[i]; i++) {
@@ -3196,20 +3211,20 @@
config_item_put(item);
}
kfree(hba_cg->default_groups);
-
- for (i = 0; subsys->su_group.default_groups[i]; i++) {
- item = &subsys->su_group.default_groups[i]->cg_item;
- subsys->su_group.default_groups[i] = NULL;
- config_item_put(item);
- }
+ hba_cg->default_groups = NULL;
+ /*
+ * We expect subsys->su_group.default_groups to be released
+ * by configfs subsystem provider logic..
+ */
+ configfs_unregister_subsystem(subsys);
kfree(subsys->su_group.default_groups);
- configfs_unregister_subsystem(subsys);
+ core_alua_free_lu_gp(se_global->default_lu_gp);
+ se_global->default_lu_gp = NULL;
+
printk(KERN_INFO "TARGET_CORE[0]: Released ConfigFS Fabric"
" Infrastructure\n");
- remove_scsi_target_mib();
- remove_proc_entry("scsi_target", 0);
core_dev_release_virtual_lun0();
rd_module_exit();
release_se_global();
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 317ce58..5da051a 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -373,11 +373,11 @@
/*
* deve->se_lun_acl will be NULL for demo-mode created LUNs
* that have not been explictly concerted to MappedLUNs ->
- * struct se_lun_acl.
+ * struct se_lun_acl, but we remove deve->alua_port_list from
+ * port->sep_alua_list. This also means that active UAs and
+ * NodeACL context specific PR metadata for demo-mode
+ * MappedLUN *deve will be released below..
*/
- if (!(deve->se_lun_acl))
- return 0;
-
spin_lock_bh(&port->sep_alua_lock);
list_del(&deve->alua_port_list);
spin_unlock_bh(&port->sep_alua_lock);
@@ -395,12 +395,14 @@
printk(KERN_ERR "struct se_dev_entry->se_lun_acl"
" already set for demo mode -> explict"
" LUN ACL transition\n");
+ spin_unlock_irq(&nacl->device_list_lock);
return -1;
}
if (deve->se_lun != lun) {
printk(KERN_ERR "struct se_dev_entry->se_lun does"
" match passed struct se_lun for demo mode"
" -> explict LUN ACL transition\n");
+ spin_unlock_irq(&nacl->device_list_lock);
return -1;
}
deve->se_lun_acl = lun_acl;
@@ -865,9 +867,6 @@
}
}
spin_unlock(&hba->device_lock);
-
- while (atomic_read(&hba->dev_mib_access_count))
- cpu_relax();
}
int se_dev_check_online(struct se_device *dev)
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index 32b148d..b65d1c8 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -214,12 +214,22 @@
CONFIGFS_EATTR_OPS(target_fabric_mappedlun, se_lun_acl, se_lun_group);
+static void target_fabric_mappedlun_release(struct config_item *item)
+{
+ struct se_lun_acl *lacl = container_of(to_config_group(item),
+ struct se_lun_acl, se_lun_group);
+ struct se_portal_group *se_tpg = lacl->se_lun_nacl->se_tpg;
+
+ core_dev_free_initiator_node_lun_acl(se_tpg, lacl);
+}
+
static struct configfs_attribute *target_fabric_mappedlun_attrs[] = {
&target_fabric_mappedlun_write_protect.attr,
NULL,
};
static struct configfs_item_operations target_fabric_mappedlun_item_ops = {
+ .release = target_fabric_mappedlun_release,
.show_attribute = target_fabric_mappedlun_attr_show,
.store_attribute = target_fabric_mappedlun_attr_store,
.allow_link = target_fabric_mappedlun_link,
@@ -337,15 +347,21 @@
struct config_group *group,
struct config_item *item)
{
- struct se_lun_acl *lacl = container_of(to_config_group(item),
- struct se_lun_acl, se_lun_group);
- struct se_portal_group *se_tpg = lacl->se_lun_nacl->se_tpg;
-
config_item_put(item);
- core_dev_free_initiator_node_lun_acl(se_tpg, lacl);
+}
+
+static void target_fabric_nacl_base_release(struct config_item *item)
+{
+ struct se_node_acl *se_nacl = container_of(to_config_group(item),
+ struct se_node_acl, acl_group);
+ struct se_portal_group *se_tpg = se_nacl->se_tpg;
+ struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf;
+
+ tf->tf_ops.fabric_drop_nodeacl(se_nacl);
}
static struct configfs_item_operations target_fabric_nacl_base_item_ops = {
+ .release = target_fabric_nacl_base_release,
.show_attribute = target_fabric_nacl_base_attr_show,
.store_attribute = target_fabric_nacl_base_attr_store,
};
@@ -404,9 +420,6 @@
struct config_group *group,
struct config_item *item)
{
- struct se_portal_group *se_tpg = container_of(group,
- struct se_portal_group, tpg_acl_group);
- struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf;
struct se_node_acl *se_nacl = container_of(to_config_group(item),
struct se_node_acl, acl_group);
struct config_item *df_item;
@@ -419,9 +432,10 @@
nacl_cg->default_groups[i] = NULL;
config_item_put(df_item);
}
-
+ /*
+ * struct se_node_acl free is done in target_fabric_nacl_base_release()
+ */
config_item_put(item);
- tf->tf_ops.fabric_drop_nodeacl(se_nacl);
}
static struct configfs_group_operations target_fabric_nacl_group_ops = {
@@ -437,7 +451,18 @@
CONFIGFS_EATTR_OPS(target_fabric_np_base, se_tpg_np, tpg_np_group);
+static void target_fabric_np_base_release(struct config_item *item)
+{
+ struct se_tpg_np *se_tpg_np = container_of(to_config_group(item),
+ struct se_tpg_np, tpg_np_group);
+ struct se_portal_group *se_tpg = se_tpg_np->tpg_np_parent;
+ struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf;
+
+ tf->tf_ops.fabric_drop_np(se_tpg_np);
+}
+
static struct configfs_item_operations target_fabric_np_base_item_ops = {
+ .release = target_fabric_np_base_release,
.show_attribute = target_fabric_np_base_attr_show,
.store_attribute = target_fabric_np_base_attr_store,
};
@@ -466,6 +491,7 @@
if (!(se_tpg_np) || IS_ERR(se_tpg_np))
return ERR_PTR(-EINVAL);
+ se_tpg_np->tpg_np_parent = se_tpg;
config_group_init_type_name(&se_tpg_np->tpg_np_group, name,
&TF_CIT_TMPL(tf)->tfc_tpg_np_base_cit);
@@ -476,14 +502,10 @@
struct config_group *group,
struct config_item *item)
{
- struct se_portal_group *se_tpg = container_of(group,
- struct se_portal_group, tpg_np_group);
- struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf;
- struct se_tpg_np *se_tpg_np = container_of(to_config_group(item),
- struct se_tpg_np, tpg_np_group);
-
+ /*
+ * struct se_tpg_np is released via target_fabric_np_base_release()
+ */
config_item_put(item);
- tf->tf_ops.fabric_drop_np(se_tpg_np);
}
static struct configfs_group_operations target_fabric_np_group_ops = {
@@ -814,7 +836,18 @@
*/
CONFIGFS_EATTR_OPS(target_fabric_tpg, se_portal_group, tpg_group);
+static void target_fabric_tpg_release(struct config_item *item)
+{
+ struct se_portal_group *se_tpg = container_of(to_config_group(item),
+ struct se_portal_group, tpg_group);
+ struct se_wwn *wwn = se_tpg->se_tpg_wwn;
+ struct target_fabric_configfs *tf = wwn->wwn_tf;
+
+ tf->tf_ops.fabric_drop_tpg(se_tpg);
+}
+
static struct configfs_item_operations target_fabric_tpg_base_item_ops = {
+ .release = target_fabric_tpg_release,
.show_attribute = target_fabric_tpg_attr_show,
.store_attribute = target_fabric_tpg_attr_store,
};
@@ -872,8 +905,6 @@
struct config_group *group,
struct config_item *item)
{
- struct se_wwn *wwn = container_of(group, struct se_wwn, wwn_group);
- struct target_fabric_configfs *tf = wwn->wwn_tf;
struct se_portal_group *se_tpg = container_of(to_config_group(item),
struct se_portal_group, tpg_group);
struct config_group *tpg_cg = &se_tpg->tpg_group;
@@ -890,15 +921,28 @@
}
config_item_put(item);
- tf->tf_ops.fabric_drop_tpg(se_tpg);
}
+static void target_fabric_release_wwn(struct config_item *item)
+{
+ struct se_wwn *wwn = container_of(to_config_group(item),
+ struct se_wwn, wwn_group);
+ struct target_fabric_configfs *tf = wwn->wwn_tf;
+
+ tf->tf_ops.fabric_drop_wwn(wwn);
+}
+
+static struct configfs_item_operations target_fabric_tpg_item_ops = {
+ .release = target_fabric_release_wwn,
+};
+
static struct configfs_group_operations target_fabric_tpg_group_ops = {
.make_group = target_fabric_make_tpg,
.drop_item = target_fabric_drop_tpg,
};
-TF_CIT_SETUP(tpg, NULL, &target_fabric_tpg_group_ops, NULL);
+TF_CIT_SETUP(tpg, &target_fabric_tpg_item_ops, &target_fabric_tpg_group_ops,
+ NULL);
/* End of tfc_tpg_cit */
@@ -932,13 +976,7 @@
struct config_group *group,
struct config_item *item)
{
- struct target_fabric_configfs *tf = container_of(group,
- struct target_fabric_configfs, tf_group);
- struct se_wwn *wwn = container_of(to_config_group(item),
- struct se_wwn, wwn_group);
-
config_item_put(item);
- tf->tf_ops.fabric_drop_wwn(wwn);
}
static struct configfs_group_operations target_fabric_wwn_group_ops = {
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index c6e0d75..67f0c09 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -154,7 +154,7 @@
bd = blkdev_get_by_path(ib_dev->ibd_udev_path,
FMODE_WRITE|FMODE_READ|FMODE_EXCL, ib_dev);
- if (!(bd))
+ if (IS_ERR(bd))
goto failed;
/*
* Setup the local scope queue_limits from struct request_queue->limits
@@ -220,8 +220,10 @@
{
struct iblock_dev *ib_dev = p;
- blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
- bioset_free(ib_dev->ibd_bio_set);
+ if (ib_dev->ibd_bd != NULL)
+ blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
+ if (ib_dev->ibd_bio_set != NULL)
+ bioset_free(ib_dev->ibd_bio_set);
kfree(ib_dev);
}
diff --git a/drivers/target/target_core_mib.c b/drivers/target/target_core_mib.c
deleted file mode 100644
index d5a48aa..0000000
--- a/drivers/target/target_core_mib.c
+++ /dev/null
@@ -1,1078 +0,0 @@
-/*******************************************************************************
- * Filename: target_core_mib.c
- *
- * Copyright (c) 2006-2007 SBE, Inc. All Rights Reserved.
- * Copyright (c) 2007-2010 Rising Tide Systems
- * Copyright (c) 2008-2010 Linux-iSCSI.org
- *
- * Nicholas A. Bellinger <nab@linux-iscsi.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- ******************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/string.h>
-#include <linux/version.h>
-#include <generated/utsrelease.h>
-#include <linux/utsname.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/blkdev.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-
-#include <target/target_core_base.h>
-#include <target/target_core_transport.h>
-#include <target/target_core_fabric_ops.h>
-#include <target/target_core_configfs.h>
-
-#include "target_core_hba.h"
-#include "target_core_mib.h"
-
-/* SCSI mib table index */
-static struct scsi_index_table scsi_index_table;
-
-#ifndef INITIAL_JIFFIES
-#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
-#endif
-
-/* SCSI Instance Table */
-#define SCSI_INST_SW_INDEX 1
-#define SCSI_TRANSPORT_INDEX 1
-
-#define NONE "None"
-#define ISPRINT(a) ((a >= ' ') && (a <= '~'))
-
-static inline int list_is_first(const struct list_head *list,
- const struct list_head *head)
-{
- return list->prev == head;
-}
-
-static void *locate_hba_start(
- struct seq_file *seq,
- loff_t *pos)
-{
- spin_lock(&se_global->g_device_lock);
- return seq_list_start(&se_global->g_se_dev_list, *pos);
-}
-
-static void *locate_hba_next(
- struct seq_file *seq,
- void *v,
- loff_t *pos)
-{
- return seq_list_next(v, &se_global->g_se_dev_list, pos);
-}
-
-static void locate_hba_stop(struct seq_file *seq, void *v)
-{
- spin_unlock(&se_global->g_device_lock);
-}
-
-/****************************************************************************
- * SCSI MIB Tables
- ****************************************************************************/
-
-/*
- * SCSI Instance Table
- */
-static void *scsi_inst_seq_start(
- struct seq_file *seq,
- loff_t *pos)
-{
- spin_lock(&se_global->hba_lock);
- return seq_list_start(&se_global->g_hba_list, *pos);
-}
-
-static void *scsi_inst_seq_next(
- struct seq_file *seq,
- void *v,
- loff_t *pos)
-{
- return seq_list_next(v, &se_global->g_hba_list, pos);
-}
-
-static void scsi_inst_seq_stop(struct seq_file *seq, void *v)
-{
- spin_unlock(&se_global->hba_lock);
-}
-
-static int scsi_inst_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba = list_entry(v, struct se_hba, hba_list);
-
- if (list_is_first(&hba->hba_list, &se_global->g_hba_list))
- seq_puts(seq, "inst sw_indx\n");
-
- seq_printf(seq, "%u %u\n", hba->hba_index, SCSI_INST_SW_INDEX);
- seq_printf(seq, "plugin: %s version: %s\n",
- hba->transport->name, TARGET_CORE_VERSION);
-
- return 0;
-}
-
-static const struct seq_operations scsi_inst_seq_ops = {
- .start = scsi_inst_seq_start,
- .next = scsi_inst_seq_next,
- .stop = scsi_inst_seq_stop,
- .show = scsi_inst_seq_show
-};
-
-static int scsi_inst_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_inst_seq_ops);
-}
-
-static const struct file_operations scsi_inst_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_inst_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Device Table
- */
-static void *scsi_dev_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_dev_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-static int scsi_dev_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- char str[28];
- int k;
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst indx role ports\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- seq_printf(seq, "%u %u %s %u\n", hba->hba_index,
- dev->dev_index, "Target", dev->dev_port_count);
-
- memcpy(&str[0], (void *)DEV_T10_WWN(dev), 28);
-
- /* vendor */
- for (k = 0; k < 8; k++)
- str[k] = ISPRINT(DEV_T10_WWN(dev)->vendor[k]) ?
- DEV_T10_WWN(dev)->vendor[k] : 0x20;
- str[k] = 0x20;
-
- /* model */
- for (k = 0; k < 16; k++)
- str[k+9] = ISPRINT(DEV_T10_WWN(dev)->model[k]) ?
- DEV_T10_WWN(dev)->model[k] : 0x20;
- str[k + 9] = 0;
-
- seq_printf(seq, "dev_alias: %s\n", str);
-
- return 0;
-}
-
-static const struct seq_operations scsi_dev_seq_ops = {
- .start = scsi_dev_seq_start,
- .next = scsi_dev_seq_next,
- .stop = scsi_dev_seq_stop,
- .show = scsi_dev_seq_show
-};
-
-static int scsi_dev_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_dev_seq_ops);
-}
-
-static const struct file_operations scsi_dev_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_dev_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Port Table
- */
-static void *scsi_port_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_port_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_port_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-static int scsi_port_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- struct se_port *sep, *sep_tmp;
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst device indx role busy_count\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- /* FIXME: scsiPortBusyStatuses count */
- spin_lock(&dev->se_port_lock);
- list_for_each_entry_safe(sep, sep_tmp, &dev->dev_sep_list, sep_list) {
- seq_printf(seq, "%u %u %u %s%u %u\n", hba->hba_index,
- dev->dev_index, sep->sep_index, "Device",
- dev->dev_index, 0);
- }
- spin_unlock(&dev->se_port_lock);
-
- return 0;
-}
-
-static const struct seq_operations scsi_port_seq_ops = {
- .start = scsi_port_seq_start,
- .next = scsi_port_seq_next,
- .stop = scsi_port_seq_stop,
- .show = scsi_port_seq_show
-};
-
-static int scsi_port_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_port_seq_ops);
-}
-
-static const struct file_operations scsi_port_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_port_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Transport Table
- */
-static void *scsi_transport_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_transport_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_transport_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-static int scsi_transport_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- struct se_port *se, *se_tmp;
- struct se_portal_group *tpg;
- struct t10_wwn *wwn;
- char buf[64];
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst device indx dev_name\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- wwn = DEV_T10_WWN(dev);
-
- spin_lock(&dev->se_port_lock);
- list_for_each_entry_safe(se, se_tmp, &dev->dev_sep_list, sep_list) {
- tpg = se->sep_tpg;
- sprintf(buf, "scsiTransport%s",
- TPG_TFO(tpg)->get_fabric_name());
-
- seq_printf(seq, "%u %s %u %s+%s\n",
- hba->hba_index, /* scsiTransportIndex */
- buf, /* scsiTransportType */
- (TPG_TFO(tpg)->tpg_get_inst_index != NULL) ?
- TPG_TFO(tpg)->tpg_get_inst_index(tpg) :
- 0,
- TPG_TFO(tpg)->tpg_get_wwn(tpg),
- (strlen(wwn->unit_serial)) ?
- /* scsiTransportDevName */
- wwn->unit_serial : wwn->vendor);
- }
- spin_unlock(&dev->se_port_lock);
-
- return 0;
-}
-
-static const struct seq_operations scsi_transport_seq_ops = {
- .start = scsi_transport_seq_start,
- .next = scsi_transport_seq_next,
- .stop = scsi_transport_seq_stop,
- .show = scsi_transport_seq_show
-};
-
-static int scsi_transport_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_transport_seq_ops);
-}
-
-static const struct file_operations scsi_transport_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_transport_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Target Device Table
- */
-static void *scsi_tgt_dev_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_tgt_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_tgt_dev_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-
-#define LU_COUNT 1 /* for now */
-static int scsi_tgt_dev_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- int non_accessible_lus = 0;
- char status[16];
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst indx num_LUs status non_access_LUs"
- " resets\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- switch (dev->dev_status) {
- case TRANSPORT_DEVICE_ACTIVATED:
- strcpy(status, "activated");
- break;
- case TRANSPORT_DEVICE_DEACTIVATED:
- strcpy(status, "deactivated");
- non_accessible_lus = 1;
- break;
- case TRANSPORT_DEVICE_SHUTDOWN:
- strcpy(status, "shutdown");
- non_accessible_lus = 1;
- break;
- case TRANSPORT_DEVICE_OFFLINE_ACTIVATED:
- case TRANSPORT_DEVICE_OFFLINE_DEACTIVATED:
- strcpy(status, "offline");
- non_accessible_lus = 1;
- break;
- default:
- sprintf(status, "unknown(%d)", dev->dev_status);
- non_accessible_lus = 1;
- }
-
- seq_printf(seq, "%u %u %u %s %u %u\n",
- hba->hba_index, dev->dev_index, LU_COUNT,
- status, non_accessible_lus, dev->num_resets);
-
- return 0;
-}
-
-static const struct seq_operations scsi_tgt_dev_seq_ops = {
- .start = scsi_tgt_dev_seq_start,
- .next = scsi_tgt_dev_seq_next,
- .stop = scsi_tgt_dev_seq_stop,
- .show = scsi_tgt_dev_seq_show
-};
-
-static int scsi_tgt_dev_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_tgt_dev_seq_ops);
-}
-
-static const struct file_operations scsi_tgt_dev_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_tgt_dev_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Target Port Table
- */
-static void *scsi_tgt_port_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_tgt_port_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_tgt_port_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-static int scsi_tgt_port_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- struct se_port *sep, *sep_tmp;
- struct se_portal_group *tpg;
- u32 rx_mbytes, tx_mbytes;
- unsigned long long num_cmds;
- char buf[64];
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst device indx name port_index in_cmds"
- " write_mbytes read_mbytes hs_in_cmds\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- spin_lock(&dev->se_port_lock);
- list_for_each_entry_safe(sep, sep_tmp, &dev->dev_sep_list, sep_list) {
- tpg = sep->sep_tpg;
- sprintf(buf, "%sPort#",
- TPG_TFO(tpg)->get_fabric_name());
-
- seq_printf(seq, "%u %u %u %s%d %s%s%d ",
- hba->hba_index,
- dev->dev_index,
- sep->sep_index,
- buf, sep->sep_index,
- TPG_TFO(tpg)->tpg_get_wwn(tpg), "+t+",
- TPG_TFO(tpg)->tpg_get_tag(tpg));
-
- spin_lock(&sep->sep_lun->lun_sep_lock);
- num_cmds = sep->sep_stats.cmd_pdus;
- rx_mbytes = (sep->sep_stats.rx_data_octets >> 20);
- tx_mbytes = (sep->sep_stats.tx_data_octets >> 20);
- spin_unlock(&sep->sep_lun->lun_sep_lock);
-
- seq_printf(seq, "%llu %u %u %u\n", num_cmds,
- rx_mbytes, tx_mbytes, 0);
- }
- spin_unlock(&dev->se_port_lock);
-
- return 0;
-}
-
-static const struct seq_operations scsi_tgt_port_seq_ops = {
- .start = scsi_tgt_port_seq_start,
- .next = scsi_tgt_port_seq_next,
- .stop = scsi_tgt_port_seq_stop,
- .show = scsi_tgt_port_seq_show
-};
-
-static int scsi_tgt_port_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_tgt_port_seq_ops);
-}
-
-static const struct file_operations scsi_tgt_port_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_tgt_port_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Authorized Initiator Table:
- * It contains the SCSI Initiators authorized to be attached to one of the
- * local Target ports.
- * Iterates through all active TPGs and extracts the info from the ACLs
- */
-static void *scsi_auth_intr_seq_start(struct seq_file *seq, loff_t *pos)
-{
- spin_lock_bh(&se_global->se_tpg_lock);
- return seq_list_start(&se_global->g_se_tpg_list, *pos);
-}
-
-static void *scsi_auth_intr_seq_next(struct seq_file *seq, void *v,
- loff_t *pos)
-{
- return seq_list_next(v, &se_global->g_se_tpg_list, pos);
-}
-
-static void scsi_auth_intr_seq_stop(struct seq_file *seq, void *v)
-{
- spin_unlock_bh(&se_global->se_tpg_lock);
-}
-
-static int scsi_auth_intr_seq_show(struct seq_file *seq, void *v)
-{
- struct se_portal_group *se_tpg = list_entry(v, struct se_portal_group,
- se_tpg_list);
- struct se_dev_entry *deve;
- struct se_lun *lun;
- struct se_node_acl *se_nacl;
- int j;
-
- if (list_is_first(&se_tpg->se_tpg_list,
- &se_global->g_se_tpg_list))
- seq_puts(seq, "inst dev port indx dev_or_port intr_name "
- "map_indx att_count num_cmds read_mbytes "
- "write_mbytes hs_num_cmds creation_time row_status\n");
-
- if (!(se_tpg))
- return 0;
-
- spin_lock(&se_tpg->acl_node_lock);
- list_for_each_entry(se_nacl, &se_tpg->acl_node_list, acl_list) {
-
- atomic_inc(&se_nacl->mib_ref_count);
- smp_mb__after_atomic_inc();
- spin_unlock(&se_tpg->acl_node_lock);
-
- spin_lock_irq(&se_nacl->device_list_lock);
- for (j = 0; j < TRANSPORT_MAX_LUNS_PER_TPG; j++) {
- deve = &se_nacl->device_list[j];
- if (!(deve->lun_flags &
- TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) ||
- (!deve->se_lun))
- continue;
- lun = deve->se_lun;
- if (!lun->lun_se_dev)
- continue;
-
- seq_printf(seq, "%u %u %u %u %u %s %u %u %u %u %u %u"
- " %u %s\n",
- /* scsiInstIndex */
- (TPG_TFO(se_tpg)->tpg_get_inst_index != NULL) ?
- TPG_TFO(se_tpg)->tpg_get_inst_index(se_tpg) :
- 0,
- /* scsiDeviceIndex */
- lun->lun_se_dev->dev_index,
- /* scsiAuthIntrTgtPortIndex */
- TPG_TFO(se_tpg)->tpg_get_tag(se_tpg),
- /* scsiAuthIntrIndex */
- se_nacl->acl_index,
- /* scsiAuthIntrDevOrPort */
- 1,
- /* scsiAuthIntrName */
- se_nacl->initiatorname[0] ?
- se_nacl->initiatorname : NONE,
- /* FIXME: scsiAuthIntrLunMapIndex */
- 0,
- /* scsiAuthIntrAttachedTimes */
- deve->attach_count,
- /* scsiAuthIntrOutCommands */
- deve->total_cmds,
- /* scsiAuthIntrReadMegaBytes */
- (u32)(deve->read_bytes >> 20),
- /* scsiAuthIntrWrittenMegaBytes */
- (u32)(deve->write_bytes >> 20),
- /* FIXME: scsiAuthIntrHSOutCommands */
- 0,
- /* scsiAuthIntrLastCreation */
- (u32)(((u32)deve->creation_time -
- INITIAL_JIFFIES) * 100 / HZ),
- /* FIXME: scsiAuthIntrRowStatus */
- "Ready");
- }
- spin_unlock_irq(&se_nacl->device_list_lock);
-
- spin_lock(&se_tpg->acl_node_lock);
- atomic_dec(&se_nacl->mib_ref_count);
- smp_mb__after_atomic_dec();
- }
- spin_unlock(&se_tpg->acl_node_lock);
-
- return 0;
-}
-
-static const struct seq_operations scsi_auth_intr_seq_ops = {
- .start = scsi_auth_intr_seq_start,
- .next = scsi_auth_intr_seq_next,
- .stop = scsi_auth_intr_seq_stop,
- .show = scsi_auth_intr_seq_show
-};
-
-static int scsi_auth_intr_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_auth_intr_seq_ops);
-}
-
-static const struct file_operations scsi_auth_intr_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_auth_intr_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Attached Initiator Port Table:
- * It lists the SCSI Initiators attached to one of the local Target ports.
- * Iterates through all active TPGs and use active sessions from each TPG
- * to list the info fo this table.
- */
-static void *scsi_att_intr_port_seq_start(struct seq_file *seq, loff_t *pos)
-{
- spin_lock_bh(&se_global->se_tpg_lock);
- return seq_list_start(&se_global->g_se_tpg_list, *pos);
-}
-
-static void *scsi_att_intr_port_seq_next(struct seq_file *seq, void *v,
- loff_t *pos)
-{
- return seq_list_next(v, &se_global->g_se_tpg_list, pos);
-}
-
-static void scsi_att_intr_port_seq_stop(struct seq_file *seq, void *v)
-{
- spin_unlock_bh(&se_global->se_tpg_lock);
-}
-
-static int scsi_att_intr_port_seq_show(struct seq_file *seq, void *v)
-{
- struct se_portal_group *se_tpg = list_entry(v, struct se_portal_group,
- se_tpg_list);
- struct se_dev_entry *deve;
- struct se_lun *lun;
- struct se_node_acl *se_nacl;
- struct se_session *se_sess;
- unsigned char buf[64];
- int j;
-
- if (list_is_first(&se_tpg->se_tpg_list,
- &se_global->g_se_tpg_list))
- seq_puts(seq, "inst dev port indx port_auth_indx port_name"
- " port_ident\n");
-
- if (!(se_tpg))
- return 0;
-
- spin_lock(&se_tpg->session_lock);
- list_for_each_entry(se_sess, &se_tpg->tpg_sess_list, sess_list) {
- if ((TPG_TFO(se_tpg)->sess_logged_in(se_sess)) ||
- (!se_sess->se_node_acl) ||
- (!se_sess->se_node_acl->device_list))
- continue;
-
- atomic_inc(&se_sess->mib_ref_count);
- smp_mb__after_atomic_inc();
- se_nacl = se_sess->se_node_acl;
- atomic_inc(&se_nacl->mib_ref_count);
- smp_mb__after_atomic_inc();
- spin_unlock(&se_tpg->session_lock);
-
- spin_lock_irq(&se_nacl->device_list_lock);
- for (j = 0; j < TRANSPORT_MAX_LUNS_PER_TPG; j++) {
- deve = &se_nacl->device_list[j];
- if (!(deve->lun_flags &
- TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) ||
- (!deve->se_lun))
- continue;
-
- lun = deve->se_lun;
- if (!lun->lun_se_dev)
- continue;
-
- memset(buf, 0, 64);
- if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL)
- TPG_TFO(se_tpg)->sess_get_initiator_sid(
- se_sess, (unsigned char *)&buf[0], 64);
-
- seq_printf(seq, "%u %u %u %u %u %s+i+%s\n",
- /* scsiInstIndex */
- (TPG_TFO(se_tpg)->tpg_get_inst_index != NULL) ?
- TPG_TFO(se_tpg)->tpg_get_inst_index(se_tpg) :
- 0,
- /* scsiDeviceIndex */
- lun->lun_se_dev->dev_index,
- /* scsiPortIndex */
- TPG_TFO(se_tpg)->tpg_get_tag(se_tpg),
- /* scsiAttIntrPortIndex */
- (TPG_TFO(se_tpg)->sess_get_index != NULL) ?
- TPG_TFO(se_tpg)->sess_get_index(se_sess) :
- 0,
- /* scsiAttIntrPortAuthIntrIdx */
- se_nacl->acl_index,
- /* scsiAttIntrPortName */
- se_nacl->initiatorname[0] ?
- se_nacl->initiatorname : NONE,
- /* scsiAttIntrPortIdentifier */
- buf);
- }
- spin_unlock_irq(&se_nacl->device_list_lock);
-
- spin_lock(&se_tpg->session_lock);
- atomic_dec(&se_nacl->mib_ref_count);
- smp_mb__after_atomic_dec();
- atomic_dec(&se_sess->mib_ref_count);
- smp_mb__after_atomic_dec();
- }
- spin_unlock(&se_tpg->session_lock);
-
- return 0;
-}
-
-static const struct seq_operations scsi_att_intr_port_seq_ops = {
- .start = scsi_att_intr_port_seq_start,
- .next = scsi_att_intr_port_seq_next,
- .stop = scsi_att_intr_port_seq_stop,
- .show = scsi_att_intr_port_seq_show
-};
-
-static int scsi_att_intr_port_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_att_intr_port_seq_ops);
-}
-
-static const struct file_operations scsi_att_intr_port_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_att_intr_port_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/*
- * SCSI Logical Unit Table
- */
-static void *scsi_lu_seq_start(struct seq_file *seq, loff_t *pos)
-{
- return locate_hba_start(seq, pos);
-}
-
-static void *scsi_lu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- return locate_hba_next(seq, v, pos);
-}
-
-static void scsi_lu_seq_stop(struct seq_file *seq, void *v)
-{
- locate_hba_stop(seq, v);
-}
-
-#define SCSI_LU_INDEX 1
-static int scsi_lu_seq_show(struct seq_file *seq, void *v)
-{
- struct se_hba *hba;
- struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev,
- g_se_dev_list);
- struct se_device *dev = se_dev->se_dev_ptr;
- int j;
- char str[28];
-
- if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list))
- seq_puts(seq, "inst dev indx LUN lu_name vend prod rev"
- " dev_type status state-bit num_cmds read_mbytes"
- " write_mbytes resets full_stat hs_num_cmds creation_time\n");
-
- if (!(dev))
- return 0;
-
- hba = dev->se_hba;
- if (!(hba)) {
- /* Log error ? */
- return 0;
- }
-
- /* Fix LU state, if we can read it from the device */
- seq_printf(seq, "%u %u %u %llu %s", hba->hba_index,
- dev->dev_index, SCSI_LU_INDEX,
- (unsigned long long)0, /* FIXME: scsiLuDefaultLun */
- (strlen(DEV_T10_WWN(dev)->unit_serial)) ?
- /* scsiLuWwnName */
- (char *)&DEV_T10_WWN(dev)->unit_serial[0] :
- "None");
-
- memcpy(&str[0], (void *)DEV_T10_WWN(dev), 28);
- /* scsiLuVendorId */
- for (j = 0; j < 8; j++)
- str[j] = ISPRINT(DEV_T10_WWN(dev)->vendor[j]) ?
- DEV_T10_WWN(dev)->vendor[j] : 0x20;
- str[8] = 0;
- seq_printf(seq, " %s", str);
-
- /* scsiLuProductId */
- for (j = 0; j < 16; j++)
- str[j] = ISPRINT(DEV_T10_WWN(dev)->model[j]) ?
- DEV_T10_WWN(dev)->model[j] : 0x20;
- str[16] = 0;
- seq_printf(seq, " %s", str);
-
- /* scsiLuRevisionId */
- for (j = 0; j < 4; j++)
- str[j] = ISPRINT(DEV_T10_WWN(dev)->revision[j]) ?
- DEV_T10_WWN(dev)->revision[j] : 0x20;
- str[4] = 0;
- seq_printf(seq, " %s", str);
-
- seq_printf(seq, " %u %s %s %llu %u %u %u %u %u %u\n",
- /* scsiLuPeripheralType */
- TRANSPORT(dev)->get_device_type(dev),
- (dev->dev_status == TRANSPORT_DEVICE_ACTIVATED) ?
- "available" : "notavailable", /* scsiLuStatus */
- "exposed", /* scsiLuState */
- (unsigned long long)dev->num_cmds,
- /* scsiLuReadMegaBytes */
- (u32)(dev->read_bytes >> 20),
- /* scsiLuWrittenMegaBytes */
- (u32)(dev->write_bytes >> 20),
- dev->num_resets, /* scsiLuInResets */
- 0, /* scsiLuOutTaskSetFullStatus */
- 0, /* scsiLuHSInCommands */
- (u32)(((u32)dev->creation_time - INITIAL_JIFFIES) *
- 100 / HZ));
-
- return 0;
-}
-
-static const struct seq_operations scsi_lu_seq_ops = {
- .start = scsi_lu_seq_start,
- .next = scsi_lu_seq_next,
- .stop = scsi_lu_seq_stop,
- .show = scsi_lu_seq_show
-};
-
-static int scsi_lu_seq_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &scsi_lu_seq_ops);
-}
-
-static const struct file_operations scsi_lu_seq_fops = {
- .owner = THIS_MODULE,
- .open = scsi_lu_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-/****************************************************************************/
-
-/*
- * Remove proc fs entries
- */
-void remove_scsi_target_mib(void)
-{
- remove_proc_entry("scsi_target/mib/scsi_inst", NULL);
- remove_proc_entry("scsi_target/mib/scsi_dev", NULL);
- remove_proc_entry("scsi_target/mib/scsi_port", NULL);
- remove_proc_entry("scsi_target/mib/scsi_transport", NULL);
- remove_proc_entry("scsi_target/mib/scsi_tgt_dev", NULL);
- remove_proc_entry("scsi_target/mib/scsi_tgt_port", NULL);
- remove_proc_entry("scsi_target/mib/scsi_auth_intr", NULL);
- remove_proc_entry("scsi_target/mib/scsi_att_intr_port", NULL);
- remove_proc_entry("scsi_target/mib/scsi_lu", NULL);
- remove_proc_entry("scsi_target/mib", NULL);
-}
-
-/*
- * Create proc fs entries for the mib tables
- */
-int init_scsi_target_mib(void)
-{
- struct proc_dir_entry *dir_entry;
- struct proc_dir_entry *scsi_inst_entry;
- struct proc_dir_entry *scsi_dev_entry;
- struct proc_dir_entry *scsi_port_entry;
- struct proc_dir_entry *scsi_transport_entry;
- struct proc_dir_entry *scsi_tgt_dev_entry;
- struct proc_dir_entry *scsi_tgt_port_entry;
- struct proc_dir_entry *scsi_auth_intr_entry;
- struct proc_dir_entry *scsi_att_intr_port_entry;
- struct proc_dir_entry *scsi_lu_entry;
-
- dir_entry = proc_mkdir("scsi_target/mib", NULL);
- if (!(dir_entry)) {
- printk(KERN_ERR "proc_mkdir() failed.\n");
- return -1;
- }
-
- scsi_inst_entry =
- create_proc_entry("scsi_target/mib/scsi_inst", 0, NULL);
- if (scsi_inst_entry)
- scsi_inst_entry->proc_fops = &scsi_inst_seq_fops;
- else
- goto error;
-
- scsi_dev_entry =
- create_proc_entry("scsi_target/mib/scsi_dev", 0, NULL);
- if (scsi_dev_entry)
- scsi_dev_entry->proc_fops = &scsi_dev_seq_fops;
- else
- goto error;
-
- scsi_port_entry =
- create_proc_entry("scsi_target/mib/scsi_port", 0, NULL);
- if (scsi_port_entry)
- scsi_port_entry->proc_fops = &scsi_port_seq_fops;
- else
- goto error;
-
- scsi_transport_entry =
- create_proc_entry("scsi_target/mib/scsi_transport", 0, NULL);
- if (scsi_transport_entry)
- scsi_transport_entry->proc_fops = &scsi_transport_seq_fops;
- else
- goto error;
-
- scsi_tgt_dev_entry =
- create_proc_entry("scsi_target/mib/scsi_tgt_dev", 0, NULL);
- if (scsi_tgt_dev_entry)
- scsi_tgt_dev_entry->proc_fops = &scsi_tgt_dev_seq_fops;
- else
- goto error;
-
- scsi_tgt_port_entry =
- create_proc_entry("scsi_target/mib/scsi_tgt_port", 0, NULL);
- if (scsi_tgt_port_entry)
- scsi_tgt_port_entry->proc_fops = &scsi_tgt_port_seq_fops;
- else
- goto error;
-
- scsi_auth_intr_entry =
- create_proc_entry("scsi_target/mib/scsi_auth_intr", 0, NULL);
- if (scsi_auth_intr_entry)
- scsi_auth_intr_entry->proc_fops = &scsi_auth_intr_seq_fops;
- else
- goto error;
-
- scsi_att_intr_port_entry =
- create_proc_entry("scsi_target/mib/scsi_att_intr_port", 0, NULL);
- if (scsi_att_intr_port_entry)
- scsi_att_intr_port_entry->proc_fops =
- &scsi_att_intr_port_seq_fops;
- else
- goto error;
-
- scsi_lu_entry = create_proc_entry("scsi_target/mib/scsi_lu", 0, NULL);
- if (scsi_lu_entry)
- scsi_lu_entry->proc_fops = &scsi_lu_seq_fops;
- else
- goto error;
-
- return 0;
-
-error:
- printk(KERN_ERR "create_proc_entry() failed.\n");
- remove_scsi_target_mib();
- return -1;
-}
-
-/*
- * Initialize the index table for allocating unique row indexes to various mib
- * tables
- */
-void init_scsi_index_table(void)
-{
- memset(&scsi_index_table, 0, sizeof(struct scsi_index_table));
- spin_lock_init(&scsi_index_table.lock);
-}
-
-/*
- * Allocate a new row index for the entry type specified
- */
-u32 scsi_get_new_index(scsi_index_t type)
-{
- u32 new_index;
-
- if ((type < 0) || (type >= SCSI_INDEX_TYPE_MAX)) {
- printk(KERN_ERR "Invalid index type %d\n", type);
- return -1;
- }
-
- spin_lock(&scsi_index_table.lock);
- new_index = ++scsi_index_table.scsi_mib_index[type];
- if (new_index == 0)
- new_index = ++scsi_index_table.scsi_mib_index[type];
- spin_unlock(&scsi_index_table.lock);
-
- return new_index;
-}
-EXPORT_SYMBOL(scsi_get_new_index);
diff --git a/drivers/target/target_core_mib.h b/drivers/target/target_core_mib.h
deleted file mode 100644
index 2772046..0000000
--- a/drivers/target/target_core_mib.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef TARGET_CORE_MIB_H
-#define TARGET_CORE_MIB_H
-
-typedef enum {
- SCSI_INST_INDEX,
- SCSI_DEVICE_INDEX,
- SCSI_AUTH_INTR_INDEX,
- SCSI_INDEX_TYPE_MAX
-} scsi_index_t;
-
-struct scsi_index_table {
- spinlock_t lock;
- u32 scsi_mib_index[SCSI_INDEX_TYPE_MAX];
-} ____cacheline_aligned;
-
-/* SCSI Port stats */
-struct scsi_port_stats {
- u64 cmd_pdus;
- u64 tx_data_octets;
- u64 rx_data_octets;
-} ____cacheline_aligned;
-
-extern int init_scsi_target_mib(void);
-extern void remove_scsi_target_mib(void);
-extern void init_scsi_index_table(void);
-extern u32 scsi_get_new_index(scsi_index_t);
-
-#endif /*** TARGET_CORE_MIB_H ***/
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 742d246..f2a0847 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -462,8 +462,8 @@
*/
bd = blkdev_get_by_path(se_dev->se_dev_udev_path,
FMODE_WRITE|FMODE_READ|FMODE_EXCL, pdv);
- if (!(bd)) {
- printk("pSCSI: blkdev_get_by_path() failed\n");
+ if (IS_ERR(bd)) {
+ printk(KERN_ERR "pSCSI: blkdev_get_by_path() failed\n");
scsi_device_put(sd);
return NULL;
}
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index abfa81a..c26f674 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -275,7 +275,6 @@
spin_lock_init(&acl->device_list_lock);
spin_lock_init(&acl->nacl_sess_lock);
atomic_set(&acl->acl_pr_ref_count, 0);
- atomic_set(&acl->mib_ref_count, 0);
acl->queue_depth = TPG_TFO(tpg)->tpg_get_default_depth(tpg);
snprintf(acl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname);
acl->se_tpg = tpg;
@@ -318,12 +317,6 @@
cpu_relax();
}
-void core_tpg_wait_for_mib_ref(struct se_node_acl *nacl)
-{
- while (atomic_read(&nacl->mib_ref_count) != 0)
- cpu_relax();
-}
-
void core_tpg_clear_object_luns(struct se_portal_group *tpg)
{
int i, ret;
@@ -480,7 +473,6 @@
spin_unlock_bh(&tpg->session_lock);
core_tpg_wait_for_nacl_pr_ref(acl);
- core_tpg_wait_for_mib_ref(acl);
core_clear_initiator_node_from_tpg(acl, tpg);
core_free_device_list_for_node(acl, tpg);
@@ -701,6 +693,8 @@
int core_tpg_deregister(struct se_portal_group *se_tpg)
{
+ struct se_node_acl *nacl, *nacl_tmp;
+
printk(KERN_INFO "TARGET_CORE[%s]: Deallocating %s struct se_portal_group"
" for endpoint: %s Portal Tag %u\n",
(se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) ?
@@ -714,6 +708,25 @@
while (atomic_read(&se_tpg->tpg_pr_ref_count) != 0)
cpu_relax();
+ /*
+ * Release any remaining demo-mode generated se_node_acl that have
+ * not been released because of TFO->tpg_check_demo_mode_cache() == 1
+ * in transport_deregister_session().
+ */
+ spin_lock_bh(&se_tpg->acl_node_lock);
+ list_for_each_entry_safe(nacl, nacl_tmp, &se_tpg->acl_node_list,
+ acl_list) {
+ list_del(&nacl->acl_list);
+ se_tpg->num_node_acls--;
+ spin_unlock_bh(&se_tpg->acl_node_lock);
+
+ core_tpg_wait_for_nacl_pr_ref(nacl);
+ core_free_device_list_for_node(nacl, se_tpg);
+ TPG_TFO(se_tpg)->tpg_release_fabric_acl(se_tpg, nacl);
+
+ spin_lock_bh(&se_tpg->acl_node_lock);
+ }
+ spin_unlock_bh(&se_tpg->acl_node_lock);
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL)
core_tpg_release_virtual_lun0(se_tpg);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 28b6292..236e22d 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -379,6 +379,40 @@
se_global = NULL;
}
+/* SCSI statistics table index */
+static struct scsi_index_table scsi_index_table;
+
+/*
+ * Initialize the index table for allocating unique row indexes to various mib
+ * tables.
+ */
+void init_scsi_index_table(void)
+{
+ memset(&scsi_index_table, 0, sizeof(struct scsi_index_table));
+ spin_lock_init(&scsi_index_table.lock);
+}
+
+/*
+ * Allocate a new row index for the entry type specified
+ */
+u32 scsi_get_new_index(scsi_index_t type)
+{
+ u32 new_index;
+
+ if ((type < 0) || (type >= SCSI_INDEX_TYPE_MAX)) {
+ printk(KERN_ERR "Invalid index type %d\n", type);
+ return -EINVAL;
+ }
+
+ spin_lock(&scsi_index_table.lock);
+ new_index = ++scsi_index_table.scsi_mib_index[type];
+ if (new_index == 0)
+ new_index = ++scsi_index_table.scsi_mib_index[type];
+ spin_unlock(&scsi_index_table.lock);
+
+ return new_index;
+}
+
void transport_init_queue_obj(struct se_queue_obj *qobj)
{
atomic_set(&qobj->queue_cnt, 0);
@@ -437,7 +471,6 @@
}
INIT_LIST_HEAD(&se_sess->sess_list);
INIT_LIST_HEAD(&se_sess->sess_acl_list);
- atomic_set(&se_sess->mib_ref_count, 0);
return se_sess;
}
@@ -546,12 +579,6 @@
transport_free_session(se_sess);
return;
}
- /*
- * Wait for possible reference in drivers/target/target_core_mib.c:
- * scsi_att_intr_port_seq_show()
- */
- while (atomic_read(&se_sess->mib_ref_count) != 0)
- cpu_relax();
spin_lock_bh(&se_tpg->session_lock);
list_del(&se_sess->sess_list);
@@ -574,7 +601,6 @@
spin_unlock_bh(&se_tpg->acl_node_lock);
core_tpg_wait_for_nacl_pr_ref(se_nacl);
- core_tpg_wait_for_mib_ref(se_nacl);
core_free_device_list_for_node(se_nacl, se_tpg);
TPG_TFO(se_tpg)->tpg_release_fabric_acl(se_tpg,
se_nacl);
@@ -4827,6 +4853,8 @@
return ret;
}
+
+ BUG_ON(list_empty(se_mem_list));
/*
* This is the normal path for all normal non BIDI and BIDI-COMMAND
* WRITE payloads.. If we need to do BIDI READ passthrough for
@@ -5008,7 +5036,9 @@
struct se_mem *se_mem = NULL, *se_mem_lout = NULL;
u32 se_mem_cnt = 0, task_offset = 0;
- BUG_ON(list_empty(cmd->t_task->t_mem_list));
+ if (!list_empty(T_TASK(cmd)->t_mem_list))
+ se_mem = list_entry(T_TASK(cmd)->t_mem_list->next,
+ struct se_mem, se_list);
ret = transport_do_se_mem_map(dev, task,
cmd->t_task->t_mem_list, NULL, se_mem,
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f7a5dba..bf7c687 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -4,7 +4,6 @@
menuconfig THERMAL
tristate "Generic Thermal sysfs driver"
- depends on NET
help
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 7d0e63c..713b7ea 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -62,20 +62,6 @@
static unsigned int thermal_event_seqnum;
-static struct genl_family thermal_event_genl_family = {
- .id = GENL_ID_GENERATE,
- .name = THERMAL_GENL_FAMILY_NAME,
- .version = THERMAL_GENL_VERSION,
- .maxattr = THERMAL_GENL_ATTR_MAX,
-};
-
-static struct genl_multicast_group thermal_event_mcgrp = {
- .name = THERMAL_GENL_MCAST_GROUP_NAME,
-};
-
-static int genetlink_init(void);
-static void genetlink_exit(void);
-
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
@@ -1225,6 +1211,18 @@
EXPORT_SYMBOL(thermal_zone_device_unregister);
+#ifdef CONFIG_NET
+static struct genl_family thermal_event_genl_family = {
+ .id = GENL_ID_GENERATE,
+ .name = THERMAL_GENL_FAMILY_NAME,
+ .version = THERMAL_GENL_VERSION,
+ .maxattr = THERMAL_GENL_ATTR_MAX,
+};
+
+static struct genl_multicast_group thermal_event_mcgrp = {
+ .name = THERMAL_GENL_MCAST_GROUP_NAME,
+};
+
int generate_netlink_event(u32 orig, enum events event)
{
struct sk_buff *skb;
@@ -1301,6 +1299,15 @@
return result;
}
+static void genetlink_exit(void)
+{
+ genl_unregister_family(&thermal_event_genl_family);
+}
+#else /* !CONFIG_NET */
+static inline int genetlink_init(void) { return 0; }
+static inline void genetlink_exit(void) {}
+#endif /* !CONFIG_NET */
+
static int __init thermal_init(void)
{
int result = 0;
@@ -1316,11 +1323,6 @@
return result;
}
-static void genetlink_exit(void)
-{
- genl_unregister_family(&thermal_event_genl_family);
-}
-
static void __exit thermal_exit(void)
{
class_unregister(&thermal_class);
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index beb1afa..7b951ad 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -601,7 +601,7 @@
s->rts = 0;
sprintf(b, "max3100-%d", s->minor);
- s->workqueue = create_freezeable_workqueue(b);
+ s->workqueue = create_freezable_workqueue(b);
if (!s->workqueue) {
dev_warn(&s->spi->dev, "cannot create workqueue\n");
return -EBUSY;
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 910870e..750b4f6 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -833,7 +833,7 @@
struct max3107_port *s = container_of(port, struct max3107_port, port);
/* Initialize work queue */
- s->workqueue = create_freezeable_workqueue("max3107");
+ s->workqueue = create_freezable_workqueue("max3107");
if (!s->workqueue) {
dev_err(&s->spi->dev, "Workqueue creation failed\n");
return -EBUSY;
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c
index 93760b2..1ef4df9 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/serial_cs.c
@@ -712,6 +712,7 @@
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d041c68..0f299b7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2681,17 +2681,13 @@
mutex_lock(&usb_address0_mutex);
- if (!udev->config && oldspeed == USB_SPEED_SUPER) {
- /* Don't reset USB 3.0 devices during an initial setup */
- usb_set_device_state(udev, USB_STATE_DEFAULT);
- } else {
- /* Reset the device; full speed may morph to high speed */
- /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
- retval = hub_port_reset(hub, port1, udev, delay);
- if (retval < 0) /* error or disconnect */
- goto fail;
- /* success, speed is known */
- }
+ /* Reset the device; full speed may morph to high speed */
+ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ /* success, speed is known */
+
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 44c5954..81ce6a8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -48,6 +48,10 @@
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Samsung Android phone modem - ID conflict with SPH-I500 */
+ { USB_DEVICE(0x04e8, 0x6601), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -68,6 +72,10 @@
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Keytouch QWERTY Panel keyboard */
+ { USB_DEVICE(0x0926, 0x3333), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 3c6e1a0..5e14950 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -346,14 +346,19 @@
if (unlikely(!skb))
break;
- skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 0,
- req->actual);
+
+ if (skb->len == 0) { /* First fragment */
+ skb->protocol = htons(ETH_P_PHONET);
+ skb_reset_mac_header(skb);
+ /* Can't use pskb_pull() on page in IRQ */
+ memcpy(skb_put(skb, 1), page_address(page), 1);
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ skb->len == 0, req->actual);
page = NULL;
if (req->actual < req->length) { /* Last fragment */
- skb->protocol = htons(ETH_P_PHONET);
- skb_reset_mac_header(skb);
- pskb_pull(skb, 1);
skb->dev = dev;
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index e8f4f36..a6f21b8 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/of_address.h>
/**
* ehci_xilinx_of_setup - Initialize the device for ehci_reset()
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index fcbf4ab..0231814 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -169,9 +169,10 @@
}
}
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
{
- void *addr;
+ struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num];
+ void __iomem *addr;
u32 temp;
u64 temp_64;
@@ -449,7 +450,7 @@
}
}
-void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
+static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
{
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
@@ -488,7 +489,7 @@
dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
}
-void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int last_ep)
{
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 1d0f45f..a953439 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -307,7 +307,7 @@
/***************** Streams structures manipulation *************************/
-void xhci_free_stream_ctx(struct xhci_hcd *xhci,
+static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs,
struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
{
@@ -335,7 +335,7 @@
* The stream context array must be a power of 2, and can be as small as
* 64 bytes or as large as 1MB.
*/
-struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
+static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs, dma_addr_t *dma,
gfp_t mem_flags)
{
@@ -1900,11 +1900,11 @@
val &= DBOFF_MASK;
xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
" from cap regs base addr\n", val);
- xhci->dba = (void *) xhci->cap_regs + val;
+ xhci->dba = (void __iomem *) xhci->cap_regs + val;
xhci_dbg_regs(xhci);
xhci_print_run_regs(xhci);
/* Set ir_set to interrupt register set 0 */
- xhci->ir_set = (void *) xhci->run_regs->ir_set;
+ xhci->ir_set = &xhci->run_regs->ir_set[0];
/*
* Event ring setup: Allocate a normal ring, but also setup
@@ -1961,7 +1961,7 @@
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
/*
* XXX: Might need to set the Interrupter Moderation Register to
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3e8211c..3289bf4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -474,8 +474,11 @@
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
dev->eps[ep_index].stopped_trb,
&state->new_cycle_state);
- if (!state->new_deq_seg)
- BUG();
+ if (!state->new_deq_seg) {
+ WARN_ON(1);
+ return;
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg(xhci, "Finding endpoint context\n");
ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
@@ -486,8 +489,10 @@
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
state->new_deq_ptr,
&state->new_cycle_state);
- if (!state->new_deq_seg)
- BUG();
+ if (!state->new_deq_seg) {
+ WARN_ON(1);
+ return;
+ }
trb = &state->new_deq_ptr->generic;
if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
@@ -2363,12 +2368,13 @@
/* Scatter gather list entries may cross 64KB boundaries */
running_total = TRB_MAX_BUFF_SIZE -
- (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
if (running_total != 0)
num_trbs++;
/* How many more 64KB chunks to transfer, how many more TRBs? */
- while (running_total < sg_dma_len(sg)) {
+ while (running_total < sg_dma_len(sg) && running_total < temp) {
num_trbs++;
running_total += TRB_MAX_BUFF_SIZE;
}
@@ -2394,11 +2400,11 @@
static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
{
if (num_trbs != 0)
- dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+ dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
"TRBs, %d left\n", __func__,
urb->ep->desc.bEndpointAddress, num_trbs);
if (running_total != urb->transfer_buffer_length)
- dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+ dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
"queued %#x (%d), asked for %#x (%d)\n",
__func__,
urb->ep->desc.bEndpointAddress,
@@ -2533,8 +2539,7 @@
sg = urb->sg;
addr = (u64) sg_dma_address(sg);
this_sg_len = sg_dma_len(sg);
- trb_buff_len = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
if (trb_buff_len > urb->transfer_buffer_length)
trb_buff_len = urb->transfer_buffer_length;
@@ -2572,7 +2577,7 @@
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
(unsigned int) addr + trb_buff_len);
if (TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+ (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
@@ -2616,7 +2621,7 @@
}
trb_buff_len = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (addr & (TRB_MAX_BUFF_SIZE - 1));
trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
if (running_total + trb_buff_len > urb->transfer_buffer_length)
trb_buff_len =
@@ -2656,7 +2661,8 @@
num_trbs = 0;
/* How much data is (potentially) left before the 64KB boundary? */
running_total = TRB_MAX_BUFF_SIZE -
- (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
/* If there's some data on this 64KB chunk, or we have to send a
* zero-length transfer, we need at least one TRB
@@ -2700,8 +2706,8 @@
/* How much data is in the first TRB? */
addr = (u64) urb->transfer_dma;
trb_buff_len = TRB_MAX_BUFF_SIZE -
- (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
- if (urb->transfer_buffer_length < trb_buff_len)
+ (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+ if (trb_buff_len > urb->transfer_buffer_length)
trb_buff_len = urb->transfer_buffer_length;
first_trb = true;
@@ -2879,8 +2885,8 @@
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
td_len = urb->iso_frame_desc[i].length;
- running_total = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
if (running_total != 0)
num_trbs++;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 34cf4e1..2083fc2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -109,7 +109,7 @@
/*
* Set the run bit and wait for the host to be running.
*/
-int xhci_start(struct xhci_hcd *xhci)
+static int xhci_start(struct xhci_hcd *xhci)
{
u32 temp;
int ret;
@@ -329,7 +329,7 @@
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
-void xhci_event_ring_work(unsigned long arg)
+static void xhci_event_ring_work(unsigned long arg)
{
unsigned long flags;
int temp;
@@ -473,7 +473,7 @@
xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
xhci_writel(xhci, ER_IRQ_ENABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
@@ -528,7 +528,7 @@
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
@@ -755,7 +755,7 @@
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
@@ -857,7 +857,7 @@
/* Returns 1 if the arguments are OK;
* returns 0 this is a root hub; returns -EINVAL for NULL pointers.
*/
-int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
const char *func) {
struct xhci_hcd *xhci;
@@ -1693,7 +1693,7 @@
xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
}
-void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7f236fd..7f127df 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1348,7 +1348,7 @@
}
/* xHCI debugging */
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
void xhci_dbg_regs(struct xhci_hcd *xhci);
void xhci_print_run_regs(struct xhci_hcd *xhci);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 54a8bd1..c292d5c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1864,6 +1864,7 @@
INIT_LIST_HEAD(&musb->out_bulk);
hcd->uses_new_polling = 1;
+ hcd->has_tt = 1;
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d74a811..e6400be 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -488,6 +488,15 @@
unsigned set_address:1;
unsigned test_mode:1;
unsigned softconnect:1;
+
+ u8 address;
+ u8 test_mode_nr;
+ u16 ackpend; /* ep0 */
+ enum musb_g_ep0_state ep0_state;
+ struct usb_gadget g; /* the gadget */
+ struct usb_gadget_driver *gadget_driver; /* its driver */
+#endif
+
/*
* FIXME: Remove this flag.
*
@@ -501,14 +510,6 @@
*/
unsigned double_buffer_not_ok:1 __deprecated;
- u8 address;
- u8 test_mode_nr;
- u16 ackpend; /* ep0 */
- enum musb_g_ep0_state ep0_state;
- struct usb_gadget g; /* the gadget */
- struct usb_gadget_driver *gadget_driver; /* its driver */
-#endif
-
struct musb_hdrc_config *config;
#ifdef MUSB_CONFIG_PROC_FS
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a3f1233..bc8badd 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -362,6 +362,7 @@
static int omap2430_musb_exit(struct musb *musb)
{
+ del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8..0457813 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a..9c014e2 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@
__func__, status, endpoint);
} else {
tty = tty_port_tty_get(&port->port);
- if (urb->actual_length) {
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- } else
- dbg("%s: empty read urb received", __func__);
- tty_kref_put(tty);
+ if (tty) {
+ if (urb->actual_length) {
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+ } else
+ dbg("%s: empty read urb received", __func__);
+ tty_kref_put(tty);
+ }
/* Resubmit urb so we continue receiving */
if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89..1c11959 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
#include "visor.h"
/*
@@ -479,6 +480,17 @@
dbg("%s", __func__);
+ /*
+ * some Samsung Android phones in modem mode have the same ID
+ * as SPH-I500, but they are ACM devices, so dont bind to them
+ */
+ if (id->idVendor == SAMSUNG_VENDOR_ID &&
+ id->idProduct == SAMSUNG_SPH_I500_ID &&
+ serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+ serial->dev->descriptor.bDeviceSubClass ==
+ USB_CDC_SUBCLASS_ACM)
+ return -ENODEV;
+
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
index 8010aae..dd0e84a 100644
--- a/drivers/video/backlight/ltv350qv.c
+++ b/drivers/video/backlight/ltv350qv.c
@@ -239,11 +239,15 @@
lcd->spi = spi;
lcd->power = FB_BLANK_POWERDOWN;
lcd->buffer = kzalloc(8, GFP_KERNEL);
+ if (!lcd->buffer) {
+ ret = -ENOMEM;
+ goto out_free_lcd;
+ }
ld = lcd_device_register("ltv350qv", &spi->dev, lcd, <v_ops);
if (IS_ERR(ld)) {
ret = PTR_ERR(ld);
- goto out_free_lcd;
+ goto out_free_buffer;
}
lcd->ld = ld;
@@ -257,6 +261,8 @@
out_unregister:
lcd_device_unregister(ld);
+out_free_buffer:
+ kfree(lcd->buffer);
out_free_lcd:
kfree(lcd);
return ret;
@@ -268,6 +274,7 @@
ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
lcd_device_unregister(lcd->ld);
+ kfree(lcd->buffer);
kfree(lcd);
return 0;
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index db8c4c4..2417727 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -37,11 +37,19 @@
#ifdef CONFIG_PM_SLEEP
static int xen_hvm_suspend(void *data)
{
+ int err;
struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
int *cancelled = data;
BUG_ON(!irqs_disabled());
+ err = sysdev_suspend(PMSG_SUSPEND);
+ if (err) {
+ printk(KERN_ERR "xen_hvm_suspend: sysdev_suspend failed: %d\n",
+ err);
+ return err;
+ }
+
*cancelled = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r);
xen_hvm_post_suspend(*cancelled);
@@ -53,6 +61,8 @@
xen_timer_resume();
}
+ sysdev_resume();
+
return 0;
}
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 15690bb..789b3af 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -140,6 +140,7 @@
candidate->first = candidate->last = index;
candidate->offset_first = from;
candidate->to_last = to;
+ INIT_LIST_HEAD(&candidate->link);
candidate->usage = 1;
candidate->state = AFS_WBACK_PENDING;
init_waitqueue_head(&candidate->waitq);
diff --git a/fs/aio.c b/fs/aio.c
index fc557a3..26869cd 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -239,15 +239,23 @@
call_rcu(&ctx->rcu_head, ctx_rcu_free);
}
-#define get_ioctx(kioctx) do { \
- BUG_ON(atomic_read(&(kioctx)->users) <= 0); \
- atomic_inc(&(kioctx)->users); \
-} while (0)
-#define put_ioctx(kioctx) do { \
- BUG_ON(atomic_read(&(kioctx)->users) <= 0); \
- if (unlikely(atomic_dec_and_test(&(kioctx)->users))) \
- __put_ioctx(kioctx); \
-} while (0)
+static inline void get_ioctx(struct kioctx *kioctx)
+{
+ BUG_ON(atomic_read(&kioctx->users) <= 0);
+ atomic_inc(&kioctx->users);
+}
+
+static inline int try_get_ioctx(struct kioctx *kioctx)
+{
+ return atomic_inc_not_zero(&kioctx->users);
+}
+
+static inline void put_ioctx(struct kioctx *kioctx)
+{
+ BUG_ON(atomic_read(&kioctx->users) <= 0);
+ if (unlikely(atomic_dec_and_test(&kioctx->users)))
+ __put_ioctx(kioctx);
+}
/* ioctx_alloc
* Allocates and initializes an ioctx. Returns an ERR_PTR if it failed.
@@ -601,8 +609,13 @@
rcu_read_lock();
hlist_for_each_entry_rcu(ctx, n, &mm->ioctx_list, list) {
- if (ctx->user_id == ctx_id && !ctx->dead) {
- get_ioctx(ctx);
+ /*
+ * RCU protects us against accessing freed memory but
+ * we have to be careful not to get a reference when the
+ * reference count already dropped to 0 (ctx->dead test
+ * is unreliable because of races).
+ */
+ if (ctx->user_id == ctx_id && !ctx->dead && try_get_ioctx(ctx)){
ret = ctx;
break;
}
@@ -1629,6 +1642,23 @@
goto out_put_req;
spin_lock_irq(&ctx->ctx_lock);
+ /*
+ * We could have raced with io_destroy() and are currently holding a
+ * reference to ctx which should be destroyed. We cannot submit IO
+ * since ctx gets freed as soon as io_submit() puts its reference. The
+ * check here is reliable: io_destroy() sets ctx->dead before waiting
+ * for outstanding IO and the barrier between these two is realized by
+ * unlock of mm->ioctx_lock and lock of ctx->ctx_lock. Analogously we
+ * increment ctx->reqs_active before checking for ctx->dead and the
+ * barrier is realized by unlock and lock of ctx->ctx_lock. Thus if we
+ * don't see ctx->dead set here, io_destroy() waits for our IO to
+ * finish.
+ */
+ if (ctx->dead) {
+ spin_unlock_irq(&ctx->ctx_lock);
+ ret = -EINVAL;
+ goto out_put_req;
+ }
aio_run_iocb(req);
if (!list_empty(&ctx->run_list)) {
/* drain the run list */
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 333a7bb..8892870 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -873,6 +873,11 @@
ret = add_symlink(bdev->bd_part->holder_dir, &disk_to_dev(disk)->kobj);
if (ret)
goto out_del;
+ /*
+ * bdev could be deleted beneath us which would implicitly destroy
+ * the holder directory. Hold on to it.
+ */
+ kobject_get(bdev->bd_part->holder_dir);
list_add(&holder->list, &bdev->bd_holder_disks);
goto out_unlock;
@@ -909,6 +914,7 @@
del_symlink(disk->slave_dir, &part_to_dev(bdev->bd_part)->kobj);
del_symlink(bdev->bd_part->holder_dir,
&disk_to_dev(disk)->kobj);
+ kobject_put(bdev->bd_part->holder_dir);
list_del_init(&holder->list);
kfree(holder);
}
@@ -922,14 +928,15 @@
* flush_disk - invalidates all buffer-cache entries on a disk
*
* @bdev: struct block device to be flushed
+ * @kill_dirty: flag to guide handling of dirty inodes
*
* Invalidates all buffer-cache entries on a disk. It should be called
* when a disk has been changed -- either by a media change or online
* resize.
*/
-static void flush_disk(struct block_device *bdev)
+static void flush_disk(struct block_device *bdev, bool kill_dirty)
{
- if (__invalidate_device(bdev)) {
+ if (__invalidate_device(bdev, kill_dirty)) {
char name[BDEVNAME_SIZE] = "";
if (bdev->bd_disk)
@@ -966,7 +973,7 @@
"%s: detected capacity change from %lld to %lld\n",
name, bdev_size, disk_size);
i_size_write(bdev->bd_inode, disk_size);
- flush_disk(bdev);
+ flush_disk(bdev, false);
}
}
EXPORT_SYMBOL(check_disk_size_change);
@@ -1019,7 +1026,7 @@
if (!(events & DISK_EVENT_MEDIA_CHANGE))
return 0;
- flush_disk(bdev);
+ flush_disk(bdev, true);
if (bdops->revalidate_disk)
bdops->revalidate_disk(bdev->bd_disk);
return 1;
@@ -1215,12 +1222,6 @@
res = __blkdev_get(bdev, mode, 0);
- /* __blkdev_get() may alter read only status, check it afterwards */
- if (!res && (mode & FMODE_WRITE) && bdev_read_only(bdev)) {
- __blkdev_put(bdev, mode, 0);
- res = -EACCES;
- }
-
if (whole) {
/* finish claiming */
mutex_lock(&bdev->bd_mutex);
@@ -1298,6 +1299,11 @@
if (err)
return ERR_PTR(err);
+ if ((mode & FMODE_WRITE) && bdev_read_only(bdev)) {
+ blkdev_put(bdev, mode);
+ return ERR_PTR(-EACCES);
+ }
+
return bdev;
}
EXPORT_SYMBOL(blkdev_get_by_path);
@@ -1601,7 +1607,7 @@
}
EXPORT_SYMBOL(lookup_bdev);
-int __invalidate_device(struct block_device *bdev)
+int __invalidate_device(struct block_device *bdev, bool kill_dirty)
{
struct super_block *sb = get_super(bdev);
int res = 0;
@@ -1614,7 +1620,7 @@
* hold).
*/
shrink_dcache_sb(sb);
- res = invalidate_inodes(sb);
+ res = invalidate_inodes(sb, kill_dirty);
drop_super(sb);
}
invalidate_bdev(bdev);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2c98b3a..6f820fa 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -1254,6 +1254,7 @@
#define BTRFS_MOUNT_SPACE_CACHE (1 << 12)
#define BTRFS_MOUNT_CLEAR_CACHE (1 << 13)
#define BTRFS_MOUNT_USER_SUBVOL_RM_ALLOWED (1 << 14)
+#define BTRFS_MOUNT_ENOSPC_DEBUG (1 << 15)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
@@ -2218,6 +2219,8 @@
u64 start, u64 end);
int btrfs_error_discard_extent(struct btrfs_root *root, u64 bytenr,
u64 num_bytes);
+int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 type);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index f3c96fc..588ff98 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -5376,7 +5376,7 @@
num_bytes, data, 1);
goto again;
}
- if (ret == -ENOSPC) {
+ if (ret == -ENOSPC && btrfs_test_opt(root, ENOSPC_DEBUG)) {
struct btrfs_space_info *sinfo;
sinfo = __find_space_info(root->fs_info, data);
@@ -8065,6 +8065,13 @@
return ret;
}
+int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 type)
+{
+ u64 alloc_flags = get_alloc_profile(root, type);
+ return do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+}
+
/*
* helper to account the unused space of all the readonly block group in the
* list. takes mirrors into account.
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 92ac519..fd3f172 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -1433,12 +1433,13 @@
*/
u64 count_range_bits(struct extent_io_tree *tree,
u64 *start, u64 search_end, u64 max_bytes,
- unsigned long bits)
+ unsigned long bits, int contig)
{
struct rb_node *node;
struct extent_state *state;
u64 cur_start = *start;
u64 total_bytes = 0;
+ u64 last = 0;
int found = 0;
if (search_end <= cur_start) {
@@ -1463,7 +1464,9 @@
state = rb_entry(node, struct extent_state, rb_node);
if (state->start > search_end)
break;
- if (state->end >= cur_start && (state->state & bits)) {
+ if (contig && found && state->start > last + 1)
+ break;
+ if (state->end >= cur_start && (state->state & bits) == bits) {
total_bytes += min(search_end, state->end) + 1 -
max(cur_start, state->start);
if (total_bytes >= max_bytes)
@@ -1472,6 +1475,9 @@
*start = state->start;
found = 1;
}
+ last = state->end;
+ } else if (contig && found) {
+ break;
}
node = rb_next(node);
if (!node)
@@ -2912,6 +2918,46 @@
return sector;
}
+/*
+ * helper function for fiemap, which doesn't want to see any holes.
+ * This maps until we find something past 'last'
+ */
+static struct extent_map *get_extent_skip_holes(struct inode *inode,
+ u64 offset,
+ u64 last,
+ get_extent_t *get_extent)
+{
+ u64 sectorsize = BTRFS_I(inode)->root->sectorsize;
+ struct extent_map *em;
+ u64 len;
+
+ if (offset >= last)
+ return NULL;
+
+ while(1) {
+ len = last - offset;
+ if (len == 0)
+ break;
+ len = (len + sectorsize - 1) & ~(sectorsize - 1);
+ em = get_extent(inode, NULL, 0, offset, len, 0);
+ if (!em || IS_ERR(em))
+ return em;
+
+ /* if this isn't a hole return it */
+ if (!test_bit(EXTENT_FLAG_VACANCY, &em->flags) &&
+ em->block_start != EXTENT_MAP_HOLE) {
+ return em;
+ }
+
+ /* this is a hole, advance to the next extent */
+ offset = extent_map_end(em);
+ free_extent_map(em);
+ if (offset >= last)
+ break;
+ }
+ return NULL;
+}
+
int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len, get_extent_t *get_extent)
{
@@ -2921,16 +2967,19 @@
u32 flags = 0;
u32 found_type;
u64 last;
+ u64 last_for_get_extent = 0;
u64 disko = 0;
+ u64 isize = i_size_read(inode);
struct btrfs_key found_key;
struct extent_map *em = NULL;
struct extent_state *cached_state = NULL;
struct btrfs_path *path;
struct btrfs_file_extent_item *item;
int end = 0;
- u64 em_start = 0, em_len = 0;
+ u64 em_start = 0;
+ u64 em_len = 0;
+ u64 em_end = 0;
unsigned long emflags;
- int hole = 0;
if (len == 0)
return -EINVAL;
@@ -2940,6 +2989,10 @@
return -ENOMEM;
path->leave_spinning = 1;
+ /*
+ * lookup the last file extent. We're not using i_size here
+ * because there might be preallocation past i_size
+ */
ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root,
path, inode->i_ino, -1, 0);
if (ret < 0) {
@@ -2953,18 +3006,38 @@
btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
found_type = btrfs_key_type(&found_key);
- /* No extents, just return */
+ /* No extents, but there might be delalloc bits */
if (found_key.objectid != inode->i_ino ||
found_type != BTRFS_EXTENT_DATA_KEY) {
- btrfs_free_path(path);
- return 0;
+ /* have to trust i_size as the end */
+ last = (u64)-1;
+ last_for_get_extent = isize;
+ } else {
+ /*
+ * remember the start of the last extent. There are a
+ * bunch of different factors that go into the length of the
+ * extent, so its much less complex to remember where it started
+ */
+ last = found_key.offset;
+ last_for_get_extent = last + 1;
}
- last = found_key.offset;
btrfs_free_path(path);
+ /*
+ * we might have some extents allocated but more delalloc past those
+ * extents. so, we trust isize unless the start of the last extent is
+ * beyond isize
+ */
+ if (last < isize) {
+ last = (u64)-1;
+ last_for_get_extent = isize;
+ }
+
lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
&cached_state, GFP_NOFS);
- em = get_extent(inode, NULL, 0, off, max - off, 0);
+
+ em = get_extent_skip_holes(inode, off, last_for_get_extent,
+ get_extent);
if (!em)
goto out;
if (IS_ERR(em)) {
@@ -2973,19 +3046,14 @@
}
while (!end) {
- hole = 0;
- off = em->start + em->len;
+ off = extent_map_end(em);
if (off >= max)
end = 1;
- if (em->block_start == EXTENT_MAP_HOLE) {
- hole = 1;
- goto next;
- }
-
em_start = em->start;
em_len = em->len;
-
+ em_end = extent_map_end(em);
+ emflags = em->flags;
disko = 0;
flags = 0;
@@ -3004,37 +3072,29 @@
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
flags |= FIEMAP_EXTENT_ENCODED;
-next:
- emflags = em->flags;
free_extent_map(em);
em = NULL;
- if (!end) {
- em = get_extent(inode, NULL, 0, off, max - off, 0);
- if (!em)
- goto out;
- if (IS_ERR(em)) {
- ret = PTR_ERR(em);
- goto out;
- }
- emflags = em->flags;
- }
-
- if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
+ if ((em_start >= last) || em_len == (u64)-1 ||
+ (last == (u64)-1 && isize <= em_end)) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
- if (em_start == last) {
+ /* now scan forward to see if this is really the last extent. */
+ em = get_extent_skip_holes(inode, off, last_for_get_extent,
+ get_extent);
+ if (IS_ERR(em)) {
+ ret = PTR_ERR(em);
+ goto out;
+ }
+ if (!em) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
-
- if (!hole) {
- ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
- em_len, flags);
- if (ret)
- goto out_free;
- }
+ ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+ em_len, flags);
+ if (ret)
+ goto out_free;
}
out_free:
free_extent_map(em);
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 7083cfa..9318dfe 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -191,7 +191,7 @@
u64 count_range_bits(struct extent_io_tree *tree,
u64 *start, u64 search_end,
- u64 max_bytes, unsigned long bits);
+ u64 max_bytes, unsigned long bits, int contig);
void free_extent_state(struct extent_state *state);
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index fb9bd78..0efdb65 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1913,7 +1913,7 @@
private = 0;
if (count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
- (u64)-1, 1, EXTENT_DIRTY)) {
+ (u64)-1, 1, EXTENT_DIRTY, 0)) {
ret = get_state_private(&BTRFS_I(inode)->io_failure_tree,
start, &private_failure);
if (ret == 0) {
@@ -5280,6 +5280,128 @@
return em;
}
+struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *page,
+ size_t pg_offset, u64 start, u64 len,
+ int create)
+{
+ struct extent_map *em;
+ struct extent_map *hole_em = NULL;
+ u64 range_start = start;
+ u64 end;
+ u64 found;
+ u64 found_end;
+ int err = 0;
+
+ em = btrfs_get_extent(inode, page, pg_offset, start, len, create);
+ if (IS_ERR(em))
+ return em;
+ if (em) {
+ /*
+ * if our em maps to a hole, there might
+ * actually be delalloc bytes behind it
+ */
+ if (em->block_start != EXTENT_MAP_HOLE)
+ return em;
+ else
+ hole_em = em;
+ }
+
+ /* check to see if we've wrapped (len == -1 or similar) */
+ end = start + len;
+ if (end < start)
+ end = (u64)-1;
+ else
+ end -= 1;
+
+ em = NULL;
+
+ /* ok, we didn't find anything, lets look for delalloc */
+ found = count_range_bits(&BTRFS_I(inode)->io_tree, &range_start,
+ end, len, EXTENT_DELALLOC, 1);
+ found_end = range_start + found;
+ if (found_end < range_start)
+ found_end = (u64)-1;
+
+ /*
+ * we didn't find anything useful, return
+ * the original results from get_extent()
+ */
+ if (range_start > end || found_end <= start) {
+ em = hole_em;
+ hole_em = NULL;
+ goto out;
+ }
+
+ /* adjust the range_start to make sure it doesn't
+ * go backwards from the start they passed in
+ */
+ range_start = max(start,range_start);
+ found = found_end - range_start;
+
+ if (found > 0) {
+ u64 hole_start = start;
+ u64 hole_len = len;
+
+ em = alloc_extent_map(GFP_NOFS);
+ if (!em) {
+ err = -ENOMEM;
+ goto out;
+ }
+ /*
+ * when btrfs_get_extent can't find anything it
+ * returns one huge hole
+ *
+ * make sure what it found really fits our range, and
+ * adjust to make sure it is based on the start from
+ * the caller
+ */
+ if (hole_em) {
+ u64 calc_end = extent_map_end(hole_em);
+
+ if (calc_end <= start || (hole_em->start > end)) {
+ free_extent_map(hole_em);
+ hole_em = NULL;
+ } else {
+ hole_start = max(hole_em->start, start);
+ hole_len = calc_end - hole_start;
+ }
+ }
+ em->bdev = NULL;
+ if (hole_em && range_start > hole_start) {
+ /* our hole starts before our delalloc, so we
+ * have to return just the parts of the hole
+ * that go until the delalloc starts
+ */
+ em->len = min(hole_len,
+ range_start - hole_start);
+ em->start = hole_start;
+ em->orig_start = hole_start;
+ /*
+ * don't adjust block start at all,
+ * it is fixed at EXTENT_MAP_HOLE
+ */
+ em->block_start = hole_em->block_start;
+ em->block_len = hole_len;
+ } else {
+ em->start = range_start;
+ em->len = found;
+ em->orig_start = range_start;
+ em->block_start = EXTENT_MAP_DELALLOC;
+ em->block_len = found;
+ }
+ } else if (hole_em) {
+ return hole_em;
+ }
+out:
+
+ free_extent_map(hole_em);
+ if (err) {
+ free_extent_map(em);
+ return ERR_PTR(err);
+ }
+ return em;
+}
+
static struct extent_map *btrfs_new_extent_direct(struct inode *inode,
u64 start, u64 len)
{
@@ -6102,7 +6224,7 @@
static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len)
{
- return extent_fiemap(inode, fieinfo, start, len, btrfs_get_extent);
+ return extent_fiemap(inode, fieinfo, start, len, btrfs_get_extent_fiemap);
}
int btrfs_readpage(struct file *file, struct page *page)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index be2d4f6..5fdb2ab 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1071,12 +1071,15 @@
if (copy_from_user(&flags, arg, sizeof(flags)))
return -EFAULT;
- if (flags & ~BTRFS_SUBVOL_CREATE_ASYNC)
+ if (flags & BTRFS_SUBVOL_CREATE_ASYNC)
return -EINVAL;
if (flags & ~BTRFS_SUBVOL_RDONLY)
return -EOPNOTSUPP;
+ if (!is_owner_or_cap(inode))
+ return -EACCES;
+
down_write(&root->fs_info->subvol_sem);
/* nothing to do */
@@ -1097,7 +1100,7 @@
goto out_reset;
}
- ret = btrfs_update_root(trans, root,
+ ret = btrfs_update_root(trans, root->fs_info->tree_root,
&root->root_key, &root->root_item);
btrfs_commit_transaction(trans, root);
diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
index cc9b450..a178f5e 100644
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -280,6 +280,7 @@
unsigned long tot_out;
unsigned long tot_len;
char *buf;
+ bool may_late_unmap, need_unmap;
data_in = kmap(pages_in[0]);
tot_len = read_compress_length(data_in);
@@ -300,11 +301,13 @@
tot_in += in_len;
working_bytes = in_len;
+ may_late_unmap = need_unmap = false;
/* fast path: avoid using the working buffer */
if (in_page_bytes_left >= in_len) {
buf = data_in + in_offset;
bytes = in_len;
+ may_late_unmap = true;
goto cont;
}
@@ -329,14 +332,17 @@
if (working_bytes == 0 && tot_in >= tot_len)
break;
- kunmap(pages_in[page_in_index]);
- page_in_index++;
- if (page_in_index >= total_pages_in) {
+ if (page_in_index + 1 >= total_pages_in) {
ret = -1;
- data_in = NULL;
goto done;
}
- data_in = kmap(pages_in[page_in_index]);
+
+ if (may_late_unmap)
+ need_unmap = true;
+ else
+ kunmap(pages_in[page_in_index]);
+
+ data_in = kmap(pages_in[++page_in_index]);
in_page_bytes_left = PAGE_CACHE_SIZE;
in_offset = 0;
@@ -346,6 +352,8 @@
out_len = lzo1x_worst_compress(PAGE_CACHE_SIZE);
ret = lzo1x_decompress_safe(buf, in_len, workspace->buf,
&out_len);
+ if (need_unmap)
+ kunmap(pages_in[page_in_index - 1]);
if (ret != LZO_E_OK) {
printk(KERN_WARNING "btrfs decompress failed\n");
ret = -1;
@@ -363,8 +371,7 @@
break;
}
done:
- if (data_in)
- kunmap(pages_in[page_in_index]);
+ kunmap(pages_in[page_in_index]);
return ret;
}
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 0825e4e..31ade58 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -3654,6 +3654,7 @@
u32 item_size;
int ret;
int err = 0;
+ int progress = 0;
path = btrfs_alloc_path();
if (!path)
@@ -3666,9 +3667,10 @@
}
while (1) {
+ progress++;
trans = btrfs_start_transaction(rc->extent_root, 0);
BUG_ON(IS_ERR(trans));
-
+restart:
if (update_backref_cache(trans, &rc->backref_cache)) {
btrfs_end_transaction(trans, rc->extent_root);
continue;
@@ -3781,6 +3783,15 @@
}
}
}
+ if (trans && progress && err == -ENOSPC) {
+ ret = btrfs_force_chunk_alloc(trans, rc->extent_root,
+ rc->block_group->flags);
+ if (ret == 0) {
+ err = 0;
+ progress = 0;
+ goto restart;
+ }
+ }
btrfs_release_path(rc->extent_root, path);
clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index a004008..d39a989 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -155,7 +155,8 @@
Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, Opt_compress,
Opt_compress_type, Opt_compress_force, Opt_compress_force_type,
Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard,
- Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed, Opt_err,
+ Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed,
+ Opt_enospc_debug, Opt_err,
};
static match_table_t tokens = {
@@ -184,6 +185,7 @@
{Opt_space_cache, "space_cache"},
{Opt_clear_cache, "clear_cache"},
{Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"},
+ {Opt_enospc_debug, "enospc_debug"},
{Opt_err, NULL},
};
@@ -358,6 +360,9 @@
case Opt_user_subvol_rm_allowed:
btrfs_set_opt(info->mount_opt, USER_SUBVOL_RM_ALLOWED);
break;
+ case Opt_enospc_debug:
+ btrfs_set_opt(info->mount_opt, ENOSPC_DEBUG);
+ break;
case Opt_err:
printk(KERN_INFO "btrfs: unrecognized mount option "
"'%s'\n", p);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index af7dbca..dd13eb8 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1338,11 +1338,11 @@
ret = btrfs_shrink_device(device, 0);
if (ret)
- goto error_brelse;
+ goto error_undo;
ret = btrfs_rm_dev_item(root->fs_info->chunk_root, device);
if (ret)
- goto error_brelse;
+ goto error_undo;
device->in_fs_metadata = 0;
@@ -1416,6 +1416,13 @@
mutex_unlock(&root->fs_info->volume_mutex);
mutex_unlock(&uuid_mutex);
return ret;
+error_undo:
+ if (device->writeable) {
+ list_add(&device->dev_alloc_list,
+ &root->fs_info->fs_devices->alloc_list);
+ root->fs_info->fs_devices->rw_devices++;
+ }
+ goto error_brelse;
}
/*
@@ -1633,7 +1640,7 @@
device->dev_root = root->fs_info->dev_root;
device->bdev = bdev;
device->in_fs_metadata = 1;
- device->mode = 0;
+ device->mode = FMODE_EXCL;
set_blocksize(device->bdev, 4096);
if (seeding_dev) {
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 0bc68de..099a586 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -409,7 +409,7 @@
spin_lock(&inode->i_lock);
if (ci->i_release_count == fi->dir_release_count) {
dout(" marking %p complete\n", inode);
- ci->i_ceph_flags |= CEPH_I_COMPLETE;
+ /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
ci->i_max_offset = filp->f_pos;
}
spin_unlock(&inode->i_lock);
@@ -496,6 +496,7 @@
/* .snap dir? */
if (err == -ENOENT &&
+ ceph_snap(parent) == CEPH_NOSNAP &&
strcmp(dentry->d_name.name,
fsc->mount_options->snapdir_name) == 0) {
struct inode *inode = ceph_get_snapdir(parent);
@@ -1029,28 +1030,8 @@
static void ceph_dentry_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
- struct inode *parent_inode = NULL;
- u64 snapid = CEPH_NOSNAP;
- if (!IS_ROOT(dentry)) {
- parent_inode = dentry->d_parent->d_inode;
- if (parent_inode)
- snapid = ceph_snap(parent_inode);
- }
- dout("dentry_release %p parent %p\n", dentry, parent_inode);
- if (parent_inode && snapid != CEPH_SNAPDIR) {
- struct ceph_inode_info *ci = ceph_inode(parent_inode);
-
- spin_lock(&parent_inode->i_lock);
- if (ci->i_shared_gen == di->lease_shared_gen ||
- snapid <= CEPH_MAXSNAP) {
- dout(" clearing %p complete (d_release)\n",
- parent_inode);
- ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
- ci->i_release_count++;
- }
- spin_unlock(&parent_inode->i_lock);
- }
+ dout("dentry_release %p\n", dentry);
if (di) {
ceph_dentry_lru_del(dentry);
if (di->lease_session)
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 5625463..193bfa5 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -707,7 +707,7 @@
(issued & CEPH_CAP_FILE_EXCL) == 0 &&
(ci->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
dout(" marking %p complete (empty)\n", inode);
- ci->i_ceph_flags |= CEPH_I_COMPLETE;
+ /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
ci->i_max_offset = 2;
}
break;
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 39c243a..f40b913 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -584,10 +584,14 @@
if (lastinode)
iput(lastinode);
- dout("queue_realm_cap_snaps %p %llx children\n", realm, realm->ino);
- list_for_each_entry(child, &realm->children, child_item)
- queue_realm_cap_snaps(child);
+ list_for_each_entry(child, &realm->children, child_item) {
+ dout("queue_realm_cap_snaps %p %llx queue child %p %llx\n",
+ realm, realm->ino, child, child->ino);
+ list_del_init(&child->dirty_item);
+ list_add(&child->dirty_item, &realm->dirty_item);
+ }
+ list_del_init(&realm->dirty_item);
dout("queue_realm_cap_snaps %p %llx done\n", realm, realm->ino);
}
@@ -683,7 +687,9 @@
* queue cap snaps _after_ we've built the new snap contexts,
* so that i_head_snapc can be set appropriately.
*/
- list_for_each_entry(realm, &dirty_realms, dirty_item) {
+ while (!list_empty(&dirty_realms)) {
+ realm = list_first_entry(&dirty_realms, struct ceph_snap_realm,
+ dirty_item);
queue_realm_cap_snaps(realm);
}
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4a33302..a9371b6 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -127,5 +127,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.70"
+#define CIFS_VERSION "1.71"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8d9189f..79f641e 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -170,7 +170,7 @@
{
int rc, alen, slen;
const char *pct;
- char *endp, scope_id[13];
+ char scope_id[13];
struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
@@ -197,9 +197,9 @@
memcpy(scope_id, pct + 1, slen);
scope_id[slen] = '\0';
- s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
- if (endp != scope_id + slen)
- return 0;
+ rc = strict_strtoul(scope_id, 0,
+ (unsigned long *)&s6->sin6_scope_id);
+ rc = (rc == 0) ? 1 : 0;
}
return rc;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 1adc962..1676570 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -656,13 +656,13 @@
if (type == LANMAN) {
#ifdef CONFIG_CIFS_WEAK_PW_HASH
- char lnm_session_key[CIFS_SESS_KEY_SIZE];
+ char lnm_session_key[CIFS_AUTH_RESP_SIZE];
pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
/* no capabilities flags in old lanman negotiation */
- pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
/* Calculate hash with password and copy into bcc_ptr.
* Encryption Key (stored as in cryptkey) gets used if the
@@ -675,8 +675,8 @@
true : false, lnm_session_key);
ses->flags |= CIFS_SES_LANMAN;
- memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
+ memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
/* can not sign if LANMAN negotiated so no need
to calculate signing key? but what if server
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 6fc4f31..534c1d4 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -46,24 +46,28 @@
{
struct dentry *lower_dentry;
struct vfsmount *lower_mnt;
- struct dentry *dentry_save;
- struct vfsmount *vfsmount_save;
+ struct dentry *dentry_save = NULL;
+ struct vfsmount *vfsmount_save = NULL;
int rc = 1;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
lower_dentry = ecryptfs_dentry_to_lower(dentry);
lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
goto out;
- dentry_save = nd->path.dentry;
- vfsmount_save = nd->path.mnt;
- nd->path.dentry = lower_dentry;
- nd->path.mnt = lower_mnt;
+ if (nd) {
+ dentry_save = nd->path.dentry;
+ vfsmount_save = nd->path.mnt;
+ nd->path.dentry = lower_dentry;
+ nd->path.mnt = lower_mnt;
+ }
rc = lower_dentry->d_op->d_revalidate(lower_dentry, nd);
- nd->path.dentry = dentry_save;
- nd->path.mnt = vfsmount_save;
+ if (nd) {
+ nd->path.dentry = dentry_save;
+ nd->path.mnt = vfsmount_save;
+ }
if (dentry->d_inode) {
struct inode *lower_inode =
ecryptfs_inode_to_lower(dentry->d_inode);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index dbc84ed..e007534 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -632,8 +632,7 @@
u32 flags);
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct inode *ecryptfs_dir_inode,
- struct nameidata *ecryptfs_nd);
+ struct inode *ecryptfs_dir_inode);
int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
size_t *decrypted_name_size,
struct dentry *ecryptfs_dentry,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 81e10e6..7d1050e 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -317,6 +317,7 @@
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
+ .read = generic_read_dir,
.unlocked_ioctl = ecryptfs_unlocked_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ecryptfs_compat_ioctl,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index bd33f87..b592938 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -74,16 +74,20 @@
unsigned int flags_save;
int rc;
- dentry_save = nd->path.dentry;
- vfsmount_save = nd->path.mnt;
- flags_save = nd->flags;
- nd->path.dentry = lower_dentry;
- nd->path.mnt = lower_mnt;
- nd->flags &= ~LOOKUP_OPEN;
+ if (nd) {
+ dentry_save = nd->path.dentry;
+ vfsmount_save = nd->path.mnt;
+ flags_save = nd->flags;
+ nd->path.dentry = lower_dentry;
+ nd->path.mnt = lower_mnt;
+ nd->flags &= ~LOOKUP_OPEN;
+ }
rc = vfs_create(lower_dir_inode, lower_dentry, mode, nd);
- nd->path.dentry = dentry_save;
- nd->path.mnt = vfsmount_save;
- nd->flags = flags_save;
+ if (nd) {
+ nd->path.dentry = dentry_save;
+ nd->path.mnt = vfsmount_save;
+ nd->flags = flags_save;
+ }
return rc;
}
@@ -241,8 +245,7 @@
*/
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct inode *ecryptfs_dir_inode,
- struct nameidata *ecryptfs_nd)
+ struct inode *ecryptfs_dir_inode)
{
struct dentry *lower_dir_dentry;
struct vfsmount *lower_mnt;
@@ -290,8 +293,6 @@
goto out;
if (special_file(lower_inode->i_mode))
goto out;
- if (!ecryptfs_nd)
- goto out;
/* Released in this function */
page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER);
if (!page_virt) {
@@ -349,75 +350,6 @@
}
/**
- * ecryptfs_new_lower_dentry
- * @name: The name of the new dentry.
- * @lower_dir_dentry: Parent directory of the new dentry.
- * @nd: nameidata from last lookup.
- *
- * Create a new dentry or get it from lower parent dir.
- */
-static struct dentry *
-ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
- struct nameidata *nd)
-{
- struct dentry *new_dentry;
- struct dentry *tmp;
- struct inode *lower_dir_inode;
-
- lower_dir_inode = lower_dir_dentry->d_inode;
-
- tmp = d_alloc(lower_dir_dentry, name);
- if (!tmp)
- return ERR_PTR(-ENOMEM);
-
- mutex_lock(&lower_dir_inode->i_mutex);
- new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
- mutex_unlock(&lower_dir_inode->i_mutex);
-
- if (!new_dentry)
- new_dentry = tmp;
- else
- dput(tmp);
-
- return new_dentry;
-}
-
-
-/**
- * ecryptfs_lookup_one_lower
- * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
- * @lower_dir_dentry: lower parent directory
- * @name: lower file name
- *
- * Get the lower dentry from vfs. If lower dentry does not exist yet,
- * create it.
- */
-static struct dentry *
-ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
- struct dentry *lower_dir_dentry, struct qstr *name)
-{
- struct nameidata nd;
- struct vfsmount *lower_mnt;
- int err;
-
- lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
- ecryptfs_dentry->d_parent));
- err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
- mntput(lower_mnt);
-
- if (!err) {
- /* we dont need the mount */
- mntput(nd.path.mnt);
- return nd.path.dentry;
- }
- if (err != -ENOENT)
- return ERR_PTR(err);
-
- /* create a new lower dentry */
- return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
-}
-
-/**
* ecryptfs_lookup
* @ecryptfs_dir_inode: The eCryptfs directory inode
* @ecryptfs_dentry: The eCryptfs dentry that we are looking up
@@ -434,7 +366,6 @@
size_t encrypted_and_encoded_name_size;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
struct dentry *lower_dir_dentry, *lower_dentry;
- struct qstr lower_name;
int rc = 0;
if ((ecryptfs_dentry->d_name.len == 1
@@ -444,20 +375,14 @@
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
- lower_name.name = ecryptfs_dentry->d_name.name;
- lower_name.len = ecryptfs_dentry->d_name.len;
- lower_name.hash = ecryptfs_dentry->d_name.hash;
- if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
- rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
- lower_dir_dentry->d_inode, &lower_name);
- if (rc < 0)
- goto out_d_drop;
- }
- lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
- lower_dir_dentry, &lower_name);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
+ lower_dir_dentry,
+ ecryptfs_dentry->d_name.len);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
@@ -479,28 +404,21 @@
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
- lower_name.name = encrypted_and_encoded_name;
- lower_name.len = encrypted_and_encoded_name_size;
- lower_name.hash = full_name_hash(lower_name.name, lower_name.len);
- if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
- rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
- lower_dir_dentry->d_inode, &lower_name);
- if (rc < 0)
- goto out_d_drop;
- }
- lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
- lower_dir_dentry, &lower_name);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = lookup_one_len(encrypted_and_encoded_name,
+ lower_dir_dentry,
+ encrypted_and_encoded_name_size);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
}
lookup_and_interpose:
rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
- ecryptfs_dir_inode,
- ecryptfs_nd);
+ ecryptfs_dir_inode);
goto out;
out_d_drop:
d_drop(ecryptfs_dentry);
@@ -1092,6 +1010,8 @@
rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
ecryptfs_dentry_to_lower(dentry), &lower_stat);
if (!rc) {
+ fsstack_copy_attr_all(dentry->d_inode,
+ ecryptfs_inode_to_lower(dentry->d_inode));
generic_fillattr(dentry->d_inode, stat);
stat->blocks = lower_stat.blocks;
}
diff --git a/fs/eventfd.c b/fs/eventfd.c
index e0194b3..d9a5917 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -99,7 +99,7 @@
* @ctx: [in] Pointer to eventfd context.
*
* The eventfd context reference must have been previously acquired either
- * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ * with eventfd_ctx_get() or eventfd_ctx_fdget().
*/
void eventfd_ctx_put(struct eventfd_ctx *ctx)
{
@@ -146,9 +146,9 @@
* eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
* @ctx: [in] Pointer to eventfd context.
* @wait: [in] Wait queue to be removed.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
*
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
*
* -EAGAIN : The operation would have blocked.
*
@@ -175,11 +175,11 @@
* eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
* @ctx: [in] Pointer to eventfd context.
* @no_wait: [in] Different from zero if the operation should not block.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
*
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
*
- * -EAGAIN : The operation would have blocked but @no_wait was nonzero.
+ * -EAGAIN : The operation would have blocked but @no_wait was non-zero.
* -ERESTARTSYS : A signal interrupted the wait operation.
*
* If @no_wait is zero, the function might sleep until the eventfd internal
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 267d0ad..4a09af9 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -63,6 +63,13 @@
* cleanup path and it is also acquired by eventpoll_release_file()
* if a file has been pushed inside an epoll set and it is then
* close()d without a previous call toepoll_ctl(EPOLL_CTL_DEL).
+ * It is also acquired when inserting an epoll fd onto another epoll
+ * fd. We do this so that we walk the epoll tree and ensure that this
+ * insertion does not create a cycle of epoll file descriptors, which
+ * could lead to deadlock. We need a global mutex to prevent two
+ * simultaneous inserts (A into B and B into A) from racing and
+ * constructing a cycle without either insert observing that it is
+ * going to.
* It is possible to drop the "ep->mtx" and to use the global
* mutex "epmutex" (together with "ep->lock") to have it working,
* but having "ep->mtx" will make the interface more scalable.
@@ -224,6 +231,9 @@
*/
static DEFINE_MUTEX(epmutex);
+/* Used to check for epoll file descriptor inclusion loops */
+static struct nested_calls poll_loop_ncalls;
+
/* Used for safe wake up implementation */
static struct nested_calls poll_safewake_ncalls;
@@ -1198,6 +1208,62 @@
return res;
}
+/**
+ * ep_loop_check_proc - Callback function to be passed to the @ep_call_nested()
+ * API, to verify that adding an epoll file inside another
+ * epoll structure, does not violate the constraints, in
+ * terms of closed loops, or too deep chains (which can
+ * result in excessive stack usage).
+ *
+ * @priv: Pointer to the epoll file to be currently checked.
+ * @cookie: Original cookie for this call. This is the top-of-the-chain epoll
+ * data structure pointer.
+ * @call_nests: Current dept of the @ep_call_nested() call stack.
+ *
+ * Returns: Returns zero if adding the epoll @file inside current epoll
+ * structure @ep does not violate the constraints, or -1 otherwise.
+ */
+static int ep_loop_check_proc(void *priv, void *cookie, int call_nests)
+{
+ int error = 0;
+ struct file *file = priv;
+ struct eventpoll *ep = file->private_data;
+ struct rb_node *rbp;
+ struct epitem *epi;
+
+ mutex_lock(&ep->mtx);
+ for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
+ epi = rb_entry(rbp, struct epitem, rbn);
+ if (unlikely(is_file_epoll(epi->ffd.file))) {
+ error = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS,
+ ep_loop_check_proc, epi->ffd.file,
+ epi->ffd.file->private_data, current);
+ if (error != 0)
+ break;
+ }
+ }
+ mutex_unlock(&ep->mtx);
+
+ return error;
+}
+
+/**
+ * ep_loop_check - Performs a check to verify that adding an epoll file (@file)
+ * another epoll file (represented by @ep) does not create
+ * closed loops or too deep chains.
+ *
+ * @ep: Pointer to the epoll private data structure.
+ * @file: Pointer to the epoll file to be checked.
+ *
+ * Returns: Returns zero if adding the epoll @file inside current epoll
+ * structure @ep does not violate the constraints, or -1 otherwise.
+ */
+static int ep_loop_check(struct eventpoll *ep, struct file *file)
+{
+ return ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS,
+ ep_loop_check_proc, file, ep, current);
+}
+
/*
* Open an eventpoll file descriptor.
*/
@@ -1246,6 +1312,7 @@
struct epoll_event __user *, event)
{
int error;
+ int did_lock_epmutex = 0;
struct file *file, *tfile;
struct eventpoll *ep;
struct epitem *epi;
@@ -1287,6 +1354,25 @@
*/
ep = file->private_data;
+ /*
+ * When we insert an epoll file descriptor, inside another epoll file
+ * descriptor, there is the change of creating closed loops, which are
+ * better be handled here, than in more critical paths.
+ *
+ * We hold epmutex across the loop check and the insert in this case, in
+ * order to prevent two separate inserts from racing and each doing the
+ * insert "at the same time" such that ep_loop_check passes on both
+ * before either one does the insert, thereby creating a cycle.
+ */
+ if (unlikely(is_file_epoll(tfile) && op == EPOLL_CTL_ADD)) {
+ mutex_lock(&epmutex);
+ did_lock_epmutex = 1;
+ error = -ELOOP;
+ if (ep_loop_check(ep, tfile) != 0)
+ goto error_tgt_fput;
+ }
+
+
mutex_lock(&ep->mtx);
/*
@@ -1322,6 +1408,9 @@
mutex_unlock(&ep->mtx);
error_tgt_fput:
+ if (unlikely(did_lock_epmutex))
+ mutex_unlock(&epmutex);
+
fput(tfile);
error_fput:
fput(file);
@@ -1441,6 +1530,12 @@
EP_ITEM_COST;
BUG_ON(max_user_watches < 0);
+ /*
+ * Initialize the structure used to perform epoll file descriptor
+ * inclusion loops checks.
+ */
+ ep_nested_calls_init(&poll_loop_ncalls);
+
/* Initialize the structure used to perform safe poll wait head wake ups */
ep_nested_calls_init(&poll_safewake_ncalls);
diff --git a/fs/exofs/namei.c b/fs/exofs/namei.c
index 264e95d..4d70db1 100644
--- a/fs/exofs/namei.c
+++ b/fs/exofs/namei.c
@@ -272,7 +272,6 @@
new_de = exofs_find_entry(new_dir, new_dentry, &new_page);
if (!new_de)
goto out_dir;
- inode_inc_link_count(old_inode);
err = exofs_set_link(new_dir, new_de, new_page, old_inode);
new_inode->i_ctime = CURRENT_TIME;
if (dir_de)
@@ -286,12 +285,9 @@
if (new_dir->i_nlink >= EXOFS_LINK_MAX)
goto out_dir;
}
- inode_inc_link_count(old_inode);
err = exofs_add_link(new_dentry, old_inode);
- if (err) {
- inode_dec_link_count(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de)
inode_inc_link_count(new_dir);
}
@@ -299,7 +295,7 @@
old_inode->i_ctime = CURRENT_TIME;
exofs_delete_entry(old_de, old_page);
- inode_dec_link_count(old_inode);
+ mark_inode_dirty(old_inode);
if (dir_de) {
err = exofs_set_link(old_inode, dir_de, dir_page, new_dir);
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 2e1d834..adb9185 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -344,7 +344,6 @@
new_de = ext2_find_entry (new_dir, &new_dentry->d_name, &new_page);
if (!new_de)
goto out_dir;
- inode_inc_link_count(old_inode);
ext2_set_link(new_dir, new_de, new_page, old_inode, 1);
new_inode->i_ctime = CURRENT_TIME_SEC;
if (dir_de)
@@ -356,12 +355,9 @@
if (new_dir->i_nlink >= EXT2_LINK_MAX)
goto out_dir;
}
- inode_inc_link_count(old_inode);
err = ext2_add_link(new_dentry, old_inode);
- if (err) {
- inode_dec_link_count(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de)
inode_inc_link_count(new_dir);
}
@@ -369,12 +365,11 @@
/*
* Like most other Unix systems, set the ctime for inodes on a
* rename.
- * inode_dec_link_count() will mark the inode dirty.
*/
old_inode->i_ctime = CURRENT_TIME_SEC;
+ mark_inode_dirty(old_inode);
ext2_delete_entry (old_de, old_page);
- inode_dec_link_count(old_inode);
if (dir_de) {
if (old_dir != new_dir)
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index bfed844..83543b5 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1283,8 +1283,11 @@
if (err)
return err;
- if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc)
- return 0;
+ if (attr->ia_valid & ATTR_OPEN) {
+ if (fc->atomic_o_trunc)
+ return 0;
+ file = NULL;
+ }
if (attr->ia_valid & ATTR_SIZE)
is_truncate = true;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 95da1bc..9e0832d 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -86,18 +86,52 @@
return ff;
}
-static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
+static void fuse_release_async(struct work_struct *work)
{
- path_put(&req->misc.release.path);
+ struct fuse_req *req;
+ struct fuse_conn *fc;
+ struct path path;
+
+ req = container_of(work, struct fuse_req, misc.release.work);
+ path = req->misc.release.path;
+ fc = get_fuse_conn(path.dentry->d_inode);
+
+ fuse_put_request(fc, req);
+ path_put(&path);
}
-static void fuse_file_put(struct fuse_file *ff)
+static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
+{
+ if (fc->destroy_req) {
+ /*
+ * If this is a fuseblk mount, then it's possible that
+ * releasing the path will result in releasing the
+ * super block and sending the DESTROY request. If
+ * the server is single threaded, this would hang.
+ * For this reason do the path_put() in a separate
+ * thread.
+ */
+ atomic_inc(&req->count);
+ INIT_WORK(&req->misc.release.work, fuse_release_async);
+ schedule_work(&req->misc.release.work);
+ } else {
+ path_put(&req->misc.release.path);
+ }
+}
+
+static void fuse_file_put(struct fuse_file *ff, bool sync)
{
if (atomic_dec_and_test(&ff->count)) {
struct fuse_req *req = ff->reserved_req;
- req->end = fuse_release_end;
- fuse_request_send_background(ff->fc, req);
+ if (sync) {
+ fuse_request_send(ff->fc, req);
+ path_put(&req->misc.release.path);
+ fuse_put_request(ff->fc, req);
+ } else {
+ req->end = fuse_release_end;
+ fuse_request_send_background(ff->fc, req);
+ }
kfree(ff);
}
}
@@ -219,8 +253,12 @@
* Normally this will send the RELEASE request, however if
* some asynchronous READ or WRITE requests are outstanding,
* the sending will be delayed.
+ *
+ * Make the release synchronous if this is a fuseblk mount,
+ * synchronous RELEASE is allowed (and desirable) in this case
+ * because the server can be trusted not to screw up.
*/
- fuse_file_put(ff);
+ fuse_file_put(ff, ff->fc->destroy_req != NULL);
}
static int fuse_open(struct inode *inode, struct file *file)
@@ -558,7 +596,7 @@
page_cache_release(page);
}
if (req->ff)
- fuse_file_put(req->ff);
+ fuse_file_put(req->ff, false);
}
static void fuse_send_readpages(struct fuse_req *req, struct file *file)
@@ -1137,7 +1175,7 @@
static void fuse_writepage_free(struct fuse_conn *fc, struct fuse_req *req)
{
__free_page(req->pages[0]);
- fuse_file_put(req->ff);
+ fuse_file_put(req->ff, false);
}
static void fuse_writepage_finish(struct fuse_conn *fc, struct fuse_req *req)
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index ae5744a..d428694 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -21,6 +21,7 @@
#include <linux/rwsem.h>
#include <linux/rbtree.h>
#include <linux/poll.h>
+#include <linux/workqueue.h>
/** Max number of pages that can be used in a single read request */
#define FUSE_MAX_PAGES_PER_REQ 32
@@ -262,7 +263,10 @@
/** Data for asynchronous requests */
union {
struct {
- struct fuse_release_in in;
+ union {
+ struct fuse_release_in in;
+ struct work_struct work;
+ };
struct path path;
} release;
struct fuse_init_in init_in;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 08a8beb..7cd9a5a 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1779,11 +1779,11 @@
#endif
glock_workqueue = alloc_workqueue("glock_workqueue", WQ_MEM_RECLAIM |
- WQ_HIGHPRI | WQ_FREEZEABLE, 0);
+ WQ_HIGHPRI | WQ_FREEZABLE, 0);
if (IS_ERR(glock_workqueue))
return PTR_ERR(glock_workqueue);
gfs2_delete_workqueue = alloc_workqueue("delete_workqueue",
- WQ_MEM_RECLAIM | WQ_FREEZEABLE,
+ WQ_MEM_RECLAIM | WQ_FREEZABLE,
0);
if (IS_ERR(gfs2_delete_workqueue)) {
destroy_workqueue(glock_workqueue);
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index ebef7ab..72c31a3 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -59,14 +59,7 @@
struct address_space *mapping = (struct address_space *)(gl + 1);
gfs2_init_glock_once(gl);
- memset(mapping, 0, sizeof(*mapping));
- INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC);
- spin_lock_init(&mapping->tree_lock);
- spin_lock_init(&mapping->i_mmap_lock);
- INIT_LIST_HEAD(&mapping->private_list);
- spin_lock_init(&mapping->private_lock);
- INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap);
- INIT_LIST_HEAD(&mapping->i_mmap_nonlinear);
+ address_space_init_once(mapping);
}
/**
@@ -144,7 +137,7 @@
error = -ENOMEM;
gfs_recovery_wq = alloc_workqueue("gfs_recovery",
- WQ_MEM_RECLAIM | WQ_FREEZEABLE, 0);
+ WQ_MEM_RECLAIM | WQ_FREEZABLE, 0);
if (!gfs_recovery_wq)
goto fail_wq;
diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c
index afa66aa..b4d70b1 100644
--- a/fs/hfs/dir.c
+++ b/fs/hfs/dir.c
@@ -238,46 +238,22 @@
}
/*
- * hfs_unlink()
+ * hfs_remove()
*
- * This is the unlink() entry in the inode_operations structure for
- * regular HFS directories. The purpose is to delete an existing
- * file, given the inode for the parent directory and the name
- * (and its length) of the existing file.
+ * This serves as both unlink() and rmdir() in the inode_operations
+ * structure for regular HFS directories. The purpose is to delete
+ * an existing child, given the inode for the parent directory and
+ * the name (and its length) of the existing directory.
+ *
+ * HFS does not have hardlinks, so both rmdir and unlink set the
+ * link count to 0. The only difference is the emptiness check.
*/
-static int hfs_unlink(struct inode *dir, struct dentry *dentry)
+static int hfs_remove(struct inode *dir, struct dentry *dentry)
{
- struct inode *inode;
+ struct inode *inode = dentry->d_inode;
int res;
- inode = dentry->d_inode;
- res = hfs_cat_delete(inode->i_ino, dir, &dentry->d_name);
- if (res)
- return res;
-
- drop_nlink(inode);
- hfs_delete_inode(inode);
- inode->i_ctime = CURRENT_TIME_SEC;
- mark_inode_dirty(inode);
-
- return res;
-}
-
-/*
- * hfs_rmdir()
- *
- * This is the rmdir() entry in the inode_operations structure for
- * regular HFS directories. The purpose is to delete an existing
- * directory, given the inode for the parent directory and the name
- * (and its length) of the existing directory.
- */
-static int hfs_rmdir(struct inode *dir, struct dentry *dentry)
-{
- struct inode *inode;
- int res;
-
- inode = dentry->d_inode;
- if (inode->i_size != 2)
+ if (S_ISDIR(inode->i_mode) && inode->i_size != 2)
return -ENOTEMPTY;
res = hfs_cat_delete(inode->i_ino, dir, &dentry->d_name);
if (res)
@@ -307,7 +283,7 @@
/* Unlink destination if it already exists */
if (new_dentry->d_inode) {
- res = hfs_unlink(new_dir, new_dentry);
+ res = hfs_remove(new_dir, new_dentry);
if (res)
return res;
}
@@ -332,9 +308,9 @@
const struct inode_operations hfs_dir_inode_operations = {
.create = hfs_create,
.lookup = hfs_lookup,
- .unlink = hfs_unlink,
+ .unlink = hfs_remove,
.mkdir = hfs_mkdir,
- .rmdir = hfs_rmdir,
+ .rmdir = hfs_remove,
.rename = hfs_rename,
.setattr = hfs_inode_setattr,
};
diff --git a/fs/inode.c b/fs/inode.c
index da85e56..0647d80 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -295,6 +295,20 @@
call_rcu(&inode->i_rcu, i_callback);
}
+void address_space_init_once(struct address_space *mapping)
+{
+ memset(mapping, 0, sizeof(*mapping));
+ INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC);
+ spin_lock_init(&mapping->tree_lock);
+ spin_lock_init(&mapping->i_mmap_lock);
+ INIT_LIST_HEAD(&mapping->private_list);
+ spin_lock_init(&mapping->private_lock);
+ INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap);
+ INIT_LIST_HEAD(&mapping->i_mmap_nonlinear);
+ mutex_init(&mapping->unmap_mutex);
+}
+EXPORT_SYMBOL(address_space_init_once);
+
/*
* These are initializations that only need to be done
* once, because the fields are idempotent across use
@@ -308,13 +322,7 @@
INIT_LIST_HEAD(&inode->i_devices);
INIT_LIST_HEAD(&inode->i_wb_list);
INIT_LIST_HEAD(&inode->i_lru);
- INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC);
- spin_lock_init(&inode->i_data.tree_lock);
- spin_lock_init(&inode->i_data.i_mmap_lock);
- INIT_LIST_HEAD(&inode->i_data.private_list);
- spin_lock_init(&inode->i_data.private_lock);
- INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap);
- INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear);
+ address_space_init_once(&inode->i_data);
i_size_ordered_init(inode);
#ifdef CONFIG_FSNOTIFY
INIT_HLIST_HEAD(&inode->i_fsnotify_marks);
@@ -540,11 +548,14 @@
/**
* invalidate_inodes - attempt to free all inodes on a superblock
* @sb: superblock to operate on
+ * @kill_dirty: flag to guide handling of dirty inodes
*
* Attempts to free all inodes for a given superblock. If there were any
* busy inodes return a non-zero value, else zero.
+ * If @kill_dirty is set, discard dirty inodes too, otherwise treat
+ * them as busy.
*/
-int invalidate_inodes(struct super_block *sb)
+int invalidate_inodes(struct super_block *sb, bool kill_dirty)
{
int busy = 0;
struct inode *inode, *next;
@@ -556,6 +567,10 @@
list_for_each_entry_safe(inode, next, &sb->s_inodes, i_sb_list) {
if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE))
continue;
+ if (inode->i_state & I_DIRTY && !kill_dirty) {
+ busy = 1;
+ continue;
+ }
if (atomic_read(&inode->i_count)) {
busy = 1;
continue;
diff --git a/fs/internal.h b/fs/internal.h
index 0663568..9b976b5 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -112,4 +112,4 @@
*/
extern int get_nr_dirty_inodes(void);
extern void evict_inodes(struct super_block *);
-extern int invalidate_inodes(struct super_block *);
+extern int invalidate_inodes(struct super_block *, bool);
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index ce7337d..6e6777f 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -213,7 +213,6 @@
new_de = minix_find_entry(new_dentry, &new_page);
if (!new_de)
goto out_dir;
- inode_inc_link_count(old_inode);
minix_set_link(new_de, new_page, old_inode);
new_inode->i_ctime = CURRENT_TIME_SEC;
if (dir_de)
@@ -225,18 +224,15 @@
if (new_dir->i_nlink >= info->s_link_max)
goto out_dir;
}
- inode_inc_link_count(old_inode);
err = minix_add_link(new_dentry, old_inode);
- if (err) {
- inode_dec_link_count(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de)
inode_inc_link_count(new_dir);
}
minix_delete_entry(old_de, old_page);
- inode_dec_link_count(old_inode);
+ mark_inode_dirty(old_inode);
if (dir_de) {
minix_set_link(dir_de, dir_page, new_dir);
diff --git a/fs/namei.c b/fs/namei.c
index 9e701e2..0087cf9 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -795,7 +795,7 @@
* Without that kind of total limit, nasty chains of consecutive
* symlinks can cause almost arbitrarily long lookups.
*/
-static inline int do_follow_link(struct path *path, struct nameidata *nd)
+static inline int do_follow_link(struct inode *inode, struct path *path, struct nameidata *nd)
{
void *cookie;
int err = -ELOOP;
@@ -803,6 +803,7 @@
/* We drop rcu-walk here */
if (nameidata_dentry_drop_rcu_maybe(nd, path->dentry))
return -ECHILD;
+ BUG_ON(inode != path->dentry->d_inode);
if (current->link_count >= MAX_NESTED_LINKS)
goto loop;
@@ -1413,8 +1414,7 @@
goto out_dput;
if (inode->i_op->follow_link) {
- BUG_ON(inode != next.dentry->d_inode);
- err = do_follow_link(&next, nd);
+ err = do_follow_link(inode, &next, nd);
if (err)
goto return_err;
nd->inode = nd->path.dentry->d_inode;
@@ -1458,8 +1458,7 @@
break;
if (inode && unlikely(inode->i_op->follow_link) &&
(lookup_flags & LOOKUP_FOLLOW)) {
- BUG_ON(inode != next.dentry->d_inode);
- err = do_follow_link(&next, nd);
+ err = do_follow_link(inode, &next, nd);
if (err)
goto return_err;
nd->inode = nd->path.dentry->d_inode;
diff --git a/fs/namespace.c b/fs/namespace.c
index 7b0b953..d1edf26 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1244,7 +1244,7 @@
*/
br_write_lock(vfsmount_lock);
if (mnt_get_count(mnt) != 2) {
- br_write_lock(vfsmount_lock);
+ br_write_unlock(vfsmount_lock);
return -EBUSY;
}
br_write_unlock(vfsmount_lock);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 78936a8..1ff76ac 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -51,6 +51,7 @@
#include <linux/sunrpc/bc_xprt.h>
#include <linux/xattr.h>
#include <linux/utsname.h>
+#include <linux/mm.h>
#include "nfs4_fs.h"
#include "delegation.h"
@@ -3252,6 +3253,35 @@
}
}
+static int buf_to_pages_noslab(const void *buf, size_t buflen,
+ struct page **pages, unsigned int *pgbase)
+{
+ struct page *newpage, **spages;
+ int rc = 0;
+ size_t len;
+ spages = pages;
+
+ do {
+ len = min(PAGE_CACHE_SIZE, buflen);
+ newpage = alloc_page(GFP_KERNEL);
+
+ if (newpage == NULL)
+ goto unwind;
+ memcpy(page_address(newpage), buf, len);
+ buf += len;
+ buflen -= len;
+ *pages++ = newpage;
+ rc++;
+ } while (buflen != 0);
+
+ return rc;
+
+unwind:
+ for(; rc > 0; rc--)
+ __free_page(spages[rc-1]);
+ return -ENOMEM;
+}
+
struct nfs4_cached_acl {
int cached;
size_t len;
@@ -3420,13 +3450,23 @@
.rpc_argp = &arg,
.rpc_resp = &res,
};
- int ret;
+ int ret, i;
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
+ if (i < 0)
+ return i;
nfs_inode_return_delegation(inode);
- buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+
+ /*
+ * Free each page after tx, so the only ref left is
+ * held by the network stack
+ */
+ for (; i > 0; i--)
+ put_page(pages[i-1]);
+
/*
* Acl update can result in inode attribute update.
* so mark the attribute cache invalid.
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 956629b..1275b86 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -317,8 +317,8 @@
READ_BUF(dummy32);
len += (XDR_QUADLEN(dummy32) << 2);
READMEM(buf, dummy32);
- if ((host_err = nfsd_map_name_to_uid(argp->rqstp, buf, dummy32, &iattr->ia_uid)))
- goto out_nfserr;
+ if ((status = nfsd_map_name_to_uid(argp->rqstp, buf, dummy32, &iattr->ia_uid)))
+ return status;
iattr->ia_valid |= ATTR_UID;
}
if (bmval[1] & FATTR4_WORD1_OWNER_GROUP) {
@@ -328,8 +328,8 @@
READ_BUF(dummy32);
len += (XDR_QUADLEN(dummy32) << 2);
READMEM(buf, dummy32);
- if ((host_err = nfsd_map_name_to_gid(argp->rqstp, buf, dummy32, &iattr->ia_gid)))
- goto out_nfserr;
+ if ((status = nfsd_map_name_to_gid(argp->rqstp, buf, dummy32, &iattr->ia_gid)))
+ return status;
iattr->ia_valid |= ATTR_GID;
}
if (bmval[1] & FATTR4_WORD1_TIME_ACCESS_SET) {
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 388e9e8..85f7baa 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -35,11 +35,6 @@
#include "btnode.h"
-void nilfs_btnode_cache_init_once(struct address_space *btnc)
-{
- nilfs_mapping_init_once(btnc);
-}
-
static const struct address_space_operations def_btnode_aops = {
.sync_page = block_sync_page,
};
diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h
index 7903749..1b8ebd8 100644
--- a/fs/nilfs2/btnode.h
+++ b/fs/nilfs2/btnode.h
@@ -37,7 +37,6 @@
struct buffer_head *newbh;
};
-void nilfs_btnode_cache_init_once(struct address_space *);
void nilfs_btnode_cache_init(struct address_space *, struct backing_dev_info *);
void nilfs_btnode_cache_clear(struct address_space *);
struct buffer_head *nilfs_btnode_create_block(struct address_space *btnc,
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 6a0e2a1..a0babd2 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -454,9 +454,9 @@
struct backing_dev_info *bdi = inode->i_sb->s_bdi;
INIT_LIST_HEAD(&shadow->frozen_buffers);
- nilfs_mapping_init_once(&shadow->frozen_data);
+ address_space_init_once(&shadow->frozen_data);
nilfs_mapping_init(&shadow->frozen_data, bdi, &shadow_map_aops);
- nilfs_mapping_init_once(&shadow->frozen_btnodes);
+ address_space_init_once(&shadow->frozen_btnodes);
nilfs_mapping_init(&shadow->frozen_btnodes, bdi, &shadow_map_aops);
mi->mi_shadow = shadow;
return 0;
diff --git a/fs/nilfs2/namei.c b/fs/nilfs2/namei.c
index 9803427..161791d 100644
--- a/fs/nilfs2/namei.c
+++ b/fs/nilfs2/namei.c
@@ -397,7 +397,6 @@
new_de = nilfs_find_entry(new_dir, &new_dentry->d_name, &new_page);
if (!new_de)
goto out_dir;
- inc_nlink(old_inode);
nilfs_set_link(new_dir, new_de, new_page, old_inode);
nilfs_mark_inode_dirty(new_dir);
new_inode->i_ctime = CURRENT_TIME;
@@ -411,13 +410,9 @@
if (new_dir->i_nlink >= NILFS_LINK_MAX)
goto out_dir;
}
- inc_nlink(old_inode);
err = nilfs_add_link(new_dentry, old_inode);
- if (err) {
- drop_nlink(old_inode);
- nilfs_mark_inode_dirty(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de) {
inc_nlink(new_dir);
nilfs_mark_inode_dirty(new_dir);
@@ -431,7 +426,6 @@
old_inode->i_ctime = CURRENT_TIME;
nilfs_delete_entry(old_de, old_page);
- drop_nlink(old_inode);
if (dir_de) {
nilfs_set_link(old_inode, dir_de, dir_page, new_dir);
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 0c43241..a585b35 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -492,19 +492,6 @@
return nc;
}
-void nilfs_mapping_init_once(struct address_space *mapping)
-{
- memset(mapping, 0, sizeof(*mapping));
- INIT_RADIX_TREE(&mapping->page_tree, GFP_ATOMIC);
- spin_lock_init(&mapping->tree_lock);
- INIT_LIST_HEAD(&mapping->private_list);
- spin_lock_init(&mapping->private_lock);
-
- spin_lock_init(&mapping->i_mmap_lock);
- INIT_RAW_PRIO_TREE_ROOT(&mapping->i_mmap);
- INIT_LIST_HEAD(&mapping->i_mmap_nonlinear);
-}
-
void nilfs_mapping_init(struct address_space *mapping,
struct backing_dev_info *bdi,
const struct address_space_operations *aops)
diff --git a/fs/nilfs2/page.h b/fs/nilfs2/page.h
index 622df27..2a00953 100644
--- a/fs/nilfs2/page.h
+++ b/fs/nilfs2/page.h
@@ -61,7 +61,6 @@
int nilfs_copy_dirty_pages(struct address_space *, struct address_space *);
void nilfs_copy_back_pages(struct address_space *, struct address_space *);
void nilfs_clear_dirty_pages(struct address_space *);
-void nilfs_mapping_init_once(struct address_space *mapping);
void nilfs_mapping_init(struct address_space *mapping,
struct backing_dev_info *bdi,
const struct address_space_operations *aops);
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 55ebae5..2de9f63 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -430,7 +430,8 @@
nilfs_segctor_map_segsum_entry(
sci, &sci->sc_binfo_ptr, sizeof(struct nilfs_finfo));
- if (inode->i_sb && !test_bit(NILFS_SC_HAVE_DELTA, &sci->sc_flags))
+ if (NILFS_I(inode)->i_root &&
+ !test_bit(NILFS_SC_HAVE_DELTA, &sci->sc_flags))
set_bit(NILFS_SC_HAVE_DELTA, &sci->sc_flags);
/* skip finfo */
}
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 58fd707..1673b3d 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -1279,7 +1279,7 @@
#ifdef CONFIG_NILFS_XATTR
init_rwsem(&ii->xattr_sem);
#endif
- nilfs_btnode_cache_init_once(&ii->i_btnode_cache);
+ address_space_init_once(&ii->i_btnode_cache);
ii->i_bmap = &ii->i_bmap_data;
inode_init_once(&ii->vfs_inode);
}
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 43e56b9..6180da1 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -405,9 +405,9 @@
ocfs2_quota_trans_credits(sb);
}
-/* data block for new dir/symlink, 2 for bitmap updates (bitmap fe +
- * bitmap block for the new bit) dx_root update for free list */
-#define OCFS2_DIR_LINK_ADDITIONAL_CREDITS (1 + 2 + 1)
+/* data block for new dir/symlink, allocation of directory block, dx_root
+ * update for free list */
+#define OCFS2_DIR_LINK_ADDITIONAL_CREDITS (1 + OCFS2_SUBALLOC_ALLOC + 1)
static inline int ocfs2_add_dir_index_credits(struct super_block *sb)
{
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index b5f9160..19ebc5a 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -3228,7 +3228,7 @@
u32 num_clusters, unsigned int e_flags)
{
int ret, delete, index, credits = 0;
- u32 new_bit, new_len;
+ u32 new_bit, new_len, orig_num_clusters;
unsigned int set_len;
struct ocfs2_super *osb = OCFS2_SB(sb);
handle_t *handle;
@@ -3261,6 +3261,8 @@
goto out;
}
+ orig_num_clusters = num_clusters;
+
while (num_clusters) {
ret = ocfs2_get_refcount_rec(ref_ci, context->ref_root_bh,
p_cluster, num_clusters,
@@ -3348,7 +3350,8 @@
* in write-back mode.
*/
if (context->get_clusters == ocfs2_di_get_clusters) {
- ret = ocfs2_cow_sync_writeback(sb, context, cpos, num_clusters);
+ ret = ocfs2_cow_sync_writeback(sb, context, cpos,
+ orig_num_clusters);
if (ret)
mlog_errno(ret);
}
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 38f986d..36c423f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1316,7 +1316,7 @@
struct mount_options *mopt,
int is_remount)
{
- int status;
+ int status, user_stack = 0;
char *p;
u32 tmp;
@@ -1459,6 +1459,15 @@
memcpy(mopt->cluster_stack, args[0].from,
OCFS2_STACK_LABEL_LEN);
mopt->cluster_stack[OCFS2_STACK_LABEL_LEN] = '\0';
+ /*
+ * Open code the memcmp here as we don't have
+ * an osb to pass to
+ * ocfs2_userspace_stack().
+ */
+ if (memcmp(mopt->cluster_stack,
+ OCFS2_CLASSIC_CLUSTER_STACK,
+ OCFS2_STACK_LABEL_LEN))
+ user_stack = 1;
break;
case Opt_inode64:
mopt->mount_opt |= OCFS2_MOUNT_INODE64;
@@ -1514,13 +1523,16 @@
}
}
- /* Ensure only one heartbeat mode */
- tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
- OCFS2_MOUNT_HB_NONE);
- if (hweight32(tmp) != 1) {
- mlog(ML_ERROR, "Invalid heartbeat mount options\n");
- status = 0;
- goto bail;
+ if (user_stack == 0) {
+ /* Ensure only one heartbeat mode */
+ tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL |
+ OCFS2_MOUNT_HB_GLOBAL |
+ OCFS2_MOUNT_HB_NONE);
+ if (hweight32(tmp) != 1) {
+ mlog(ML_ERROR, "Invalid heartbeat mount options\n");
+ status = 0;
+ goto bail;
+ }
}
status = 1;
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 789c625..b10e354 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -251,6 +251,11 @@
}
vm->vblk_size = get_unaligned_be32(data + 0x08);
+ if (vm->vblk_size == 0) {
+ ldm_error ("Illegal VBLK size");
+ return false;
+ }
+
vm->vblk_offset = get_unaligned_be32(data + 0x0C);
vm->last_vblk_seq = get_unaligned_be32(data + 0x04);
diff --git a/fs/partitions/mac.c b/fs/partitions/mac.c
index 68d6a21..11f688b 100644
--- a/fs/partitions/mac.c
+++ b/fs/partitions/mac.c
@@ -29,10 +29,9 @@
int mac_partition(struct parsed_partitions *state)
{
- int slot = 1;
Sector sect;
unsigned char *data;
- int blk, blocks_in_map;
+ int slot, blocks_in_map;
unsigned secsize;
#ifdef CONFIG_PPC_PMAC
int found_root = 0;
@@ -59,10 +58,14 @@
put_dev_sector(sect);
return 0; /* not a MacOS disk */
}
- strlcat(state->pp_buf, " [mac]", PAGE_SIZE);
blocks_in_map = be32_to_cpu(part->map_count);
- for (blk = 1; blk <= blocks_in_map; ++blk) {
- int pos = blk * secsize;
+ if (blocks_in_map < 0 || blocks_in_map >= DISK_MAX_PARTS) {
+ put_dev_sector(sect);
+ return 0;
+ }
+ strlcat(state->pp_buf, " [mac]", PAGE_SIZE);
+ for (slot = 1; slot <= blocks_in_map; ++slot) {
+ int pos = slot * secsize;
put_dev_sector(sect);
data = read_part_sector(state, pos/512, §);
if (!data)
@@ -113,13 +116,11 @@
}
if (goodness > found_root_goodness) {
- found_root = blk;
+ found_root = slot;
found_root_goodness = goodness;
}
}
#endif /* CONFIG_PPC_PMAC */
-
- ++slot;
}
#ifdef CONFIG_PPC_PMAC
if (found_root_goodness)
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index d9396a4..927cbd1 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -233,7 +233,7 @@
return;
root = of_find_node_by_path("/");
if (root == NULL) {
- printk(KERN_ERR "/proc/device-tree: can't find root\n");
+ pr_debug("/proc/device-tree: can't find root\n");
return;
}
proc_device_tree_add_node(root, proc_device_tree);
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index ba5f51e..68fdf45 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -771,7 +771,7 @@
EMPTY_DIR_SIZE_V1 : EMPTY_DIR_SIZE,
dentry, inode, &security);
if (retval) {
- dir->i_nlink--;
+ DEC_DIR_INODE_NLINK(dir)
goto out_failed;
}
diff --git a/fs/sysv/namei.c b/fs/sysv/namei.c
index b427b12..e474fbc 100644
--- a/fs/sysv/namei.c
+++ b/fs/sysv/namei.c
@@ -245,7 +245,6 @@
new_de = sysv_find_entry(new_dentry, &new_page);
if (!new_de)
goto out_dir;
- inode_inc_link_count(old_inode);
sysv_set_link(new_de, new_page, old_inode);
new_inode->i_ctime = CURRENT_TIME_SEC;
if (dir_de)
@@ -257,18 +256,15 @@
if (new_dir->i_nlink >= SYSV_SB(new_dir->i_sb)->s_link_max)
goto out_dir;
}
- inode_inc_link_count(old_inode);
err = sysv_add_link(new_dentry, old_inode);
- if (err) {
- inode_dec_link_count(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de)
inode_inc_link_count(new_dir);
}
sysv_delete_entry(old_de, old_page);
- inode_dec_link_count(old_inode);
+ mark_inode_dirty(old_inode);
if (dir_de) {
sysv_set_link(dir_de, dir_page, new_dir);
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 2be0f9e..b7c338d 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -32,6 +32,8 @@
#include <linux/crc-itu-t.h>
#include <linux/exportfs.h>
+enum { UDF_MAX_LINKS = 0xffff };
+
static inline int udf_match(int len1, const unsigned char *name1, int len2,
const unsigned char *name2)
{
@@ -650,7 +652,7 @@
struct udf_inode_info *iinfo;
err = -EMLINK;
- if (dir->i_nlink >= (256 << sizeof(dir->i_nlink)) - 1)
+ if (dir->i_nlink >= UDF_MAX_LINKS)
goto out;
err = -EIO;
@@ -1034,9 +1036,8 @@
struct fileIdentDesc cfi, *fi;
int err;
- if (inode->i_nlink >= (256 << sizeof(inode->i_nlink)) - 1) {
+ if (inode->i_nlink >= UDF_MAX_LINKS)
return -EMLINK;
- }
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
@@ -1131,9 +1132,7 @@
goto end_rename;
retval = -EMLINK;
- if (!new_inode &&
- new_dir->i_nlink >=
- (256 << sizeof(new_dir->i_nlink)) - 1)
+ if (!new_inode && new_dir->i_nlink >= UDF_MAX_LINKS)
goto end_rename;
}
if (!nfi) {
diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c
index 12f39b9..d6f6815 100644
--- a/fs/ufs/namei.c
+++ b/fs/ufs/namei.c
@@ -306,7 +306,6 @@
new_de = ufs_find_entry(new_dir, &new_dentry->d_name, &new_page);
if (!new_de)
goto out_dir;
- inode_inc_link_count(old_inode);
ufs_set_link(new_dir, new_de, new_page, old_inode);
new_inode->i_ctime = CURRENT_TIME_SEC;
if (dir_de)
@@ -318,12 +317,9 @@
if (new_dir->i_nlink >= UFS_LINK_MAX)
goto out_dir;
}
- inode_inc_link_count(old_inode);
err = ufs_add_link(new_dentry, old_inode);
- if (err) {
- inode_dec_link_count(old_inode);
+ if (err)
goto out_dir;
- }
if (dir_de)
inode_inc_link_count(new_dir);
}
@@ -331,12 +327,11 @@
/*
* Like most other Unix systems, set the ctime for inodes on a
* rename.
- * inode_dec_link_count() will mark the inode dirty.
*/
old_inode->i_ctime = CURRENT_TIME_SEC;
ufs_delete_entry(old_dir, old_de, old_page);
- inode_dec_link_count(old_inode);
+ mark_inode_dirty(old_inode);
if (dir_de) {
ufs_set_link(old_inode, dir_de, dir_page, new_dir);
diff --git a/fs/xfs/linux-2.6/xfs_discard.c b/fs/xfs/linux-2.6/xfs_discard.c
index 05201ae..d61611c 100644
--- a/fs/xfs/linux-2.6/xfs_discard.c
+++ b/fs/xfs/linux-2.6/xfs_discard.c
@@ -152,6 +152,8 @@
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
+ if (!blk_queue_discard(q))
+ return -XFS_ERROR(EOPNOTSUPP);
if (copy_from_user(&range, urange, sizeof(range)))
return -XFS_ERROR(EFAULT);
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index f5e2a19..0ca0e3c 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -695,14 +695,19 @@
xfs_mount_t *mp,
void __user *arg)
{
- xfs_fsop_geom_v1_t fsgeo;
+ xfs_fsop_geom_t fsgeo;
int error;
- error = xfs_fs_geometry(mp, (xfs_fsop_geom_t *)&fsgeo, 3);
+ error = xfs_fs_geometry(mp, &fsgeo, 3);
if (error)
return -error;
- if (copy_to_user(arg, &fsgeo, sizeof(fsgeo)))
+ /*
+ * Caller should have passed an argument of type
+ * xfs_fsop_geom_v1_t. This is a proper subset of the
+ * xfs_fsop_geom_t that xfs_fs_geometry() fills in.
+ */
+ if (copy_to_user(arg, &fsgeo, sizeof(xfs_fsop_geom_v1_t)))
return -XFS_ERROR(EFAULT);
return 0;
}
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index cec89dd..85668ef 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -53,6 +53,9 @@
xfs_fsop_geom_t *geo,
int new_version)
{
+
+ memset(geo, 0, sizeof(*geo));
+
geo->blocksize = mp->m_sb.sb_blocksize;
geo->rtextsize = mp->m_sb.sb_rextsize;
geo->agblocks = mp->m_sb.sb_agblocks;
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 31b6188..b4bfe33 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -4,6 +4,8 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_MMU
+#include <linux/mm_types.h>
+
#ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
extern int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep,
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index fe29aad..348843b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1101,7 +1101,7 @@
struct platform_device *platformdev; /**< Platform device struture */
struct drm_sg_mem *sg; /**< Scatter gather memory */
- int num_crtcs; /**< Number of CRTCs on this device */
+ unsigned int num_crtcs; /**< Number of CRTCs on this device */
void *dev_private; /**< device private data */
void *mm_private;
struct address_space *dev_mapping;
diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
index 5cb86c3..fc48754 100644
--- a/include/keys/rxrpc-type.h
+++ b/include/keys/rxrpc-type.h
@@ -99,7 +99,6 @@
* structure of raw payloads passed to add_key() or instantiate key
*/
struct rxrpc_key_data_v1 {
- u32 kif_version; /* 1 */
u16 security_index;
u16 ticket_length;
u32 expiry; /* time_t */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 4d18ff3..d5063e1 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -699,7 +699,7 @@
extern void blk_stop_queue(struct request_queue *q);
extern void blk_sync_queue(struct request_queue *q);
extern void __blk_stop_queue(struct request_queue *q);
-extern void __blk_run_queue(struct request_queue *);
+extern void __blk_run_queue(struct request_queue *q, bool force_kblockd);
extern void blk_run_queue(struct request_queue *);
extern int blk_rq_map_user(struct request_queue *, struct request *,
struct rq_map_data *, void __user *, unsigned long,
@@ -1088,7 +1088,6 @@
struct work_struct;
int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
-int kblockd_schedule_delayed_work(struct request_queue *q, struct delayed_work *dwork, unsigned long delay);
#ifdef CONFIG_BLK_CGROUP
/*
@@ -1136,7 +1135,6 @@
extern int blk_throtl_init(struct request_queue *q);
extern void blk_throtl_exit(struct request_queue *q);
extern int blk_throtl_bio(struct request_queue *q, struct bio **bio);
-extern void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay);
extern void throtl_shutdown_timer_wq(struct request_queue *q);
#else /* CONFIG_BLK_DEV_THROTTLING */
static inline int blk_throtl_bio(struct request_queue *q, struct bio **bio)
@@ -1146,7 +1144,6 @@
static inline int blk_throtl_init(struct request_queue *q) { return 0; }
static inline int blk_throtl_exit(struct request_queue *q) { return 0; }
-static inline void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay) {}
static inline void throtl_shutdown_timer_wq(struct request_queue *q) {}
#endif /* CONFIG_BLK_DEV_THROTTLING */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 3395cf7..b22fb0d 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -245,7 +245,6 @@
extern void blk_dump_cmd(char *buf, struct request *rq);
extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
-extern void blk_fill_rwbs_rq(char *rwbs, struct request *rq);
#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index c3011be..31d91a6 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -123,6 +123,7 @@
#define SOCK_CLOSED 11 /* socket state changed to closed */
#define OPENING 13 /* open connection w/ (possibly new) peer */
#define DEAD 14 /* dead, about to kfree */
+#define BACKOFF 15
/*
* A single connection with another host.
@@ -160,7 +161,6 @@
struct list_head out_queue;
struct list_head out_sent; /* sending or sent but unacked */
u64 out_seq; /* last message queued for send */
- bool out_keepalive_pending;
u64 in_seq, in_seq_acked; /* last message received, acked */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
index 68cd248..66900e3 100644
--- a/include/linux/dcbnl.h
+++ b/include/linux/dcbnl.h
@@ -101,8 +101,8 @@
*/
struct dcb_app {
__u8 selector;
- __u32 protocol;
__u8 priority;
+ __u16 protocol;
};
struct dcbmsg {
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index da7e52b..1effc8b 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -109,7 +109,7 @@
}
/*
- * Check if the task should be counted as freezeable by the freezer
+ * Check if the task should be counted as freezable by the freezer
*/
static inline int freezer_should_skip(struct task_struct *p)
{
diff --git a/include/linux/fs.h b/include/linux/fs.h
index bd32159..e38b50a4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -649,6 +649,7 @@
spinlock_t private_lock; /* for use by the address_space */
struct list_head private_list; /* ditto */
struct address_space *assoc_mapping; /* ditto */
+ struct mutex unmap_mutex; /* to protect unmapping */
} __attribute__((aligned(sizeof(long))));
/*
* On most architectures that alignment is already the case; but
@@ -2139,7 +2140,7 @@
struct block_device *bdev);
extern int revalidate_disk(struct gendisk *);
extern int check_disk_change(struct block_device *);
-extern int __invalidate_device(struct block_device *);
+extern int __invalidate_device(struct block_device *, bool);
extern int invalidate_partition(struct gendisk *, int);
#endif
unsigned long invalidate_mapping_pages(struct address_space *mapping,
@@ -2225,6 +2226,7 @@
extern int inode_init_always(struct super_block *, struct inode *);
extern void inode_init_once(struct inode *);
+extern void address_space_init_once(struct address_space *mapping);
extern void ihold(struct inode * inode);
extern void iput(struct inode *);
extern struct inode * igrab(struct inode *);
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 0b84c61..dca3176 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -332,16 +332,19 @@
return alloc_pages_current(gfp_mask, order);
}
extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
- struct vm_area_struct *vma, unsigned long addr);
+ struct vm_area_struct *vma, unsigned long addr,
+ int node);
#else
#define alloc_pages(gfp_mask, order) \
alloc_pages_node(numa_node_id(), gfp_mask, order)
-#define alloc_pages_vma(gfp_mask, order, vma, addr) \
+#define alloc_pages_vma(gfp_mask, order, vma, addr, node) \
alloc_pages(gfp_mask, order)
#endif
#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
-#define alloc_page_vma(gfp_mask, vma, addr) \
- alloc_pages_vma(gfp_mask, 0, vma, addr)
+#define alloc_page_vma(gfp_mask, vma, addr) \
+ alloc_pages_vma(gfp_mask, 0, vma, addr, numa_node_id())
+#define alloc_page_vma_node(gfp_mask, vma, addr, node) \
+ alloc_pages_vma(gfp_mask, 0, vma, addr, node)
extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
extern unsigned long get_zeroed_page(gfp_t gfp_mask);
diff --git a/include/linux/list.h b/include/linux/list.h
index 9a5f8a7..3a54266 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -96,6 +96,11 @@
* in an undefined state.
*/
#ifndef CONFIG_DEBUG_LIST
+static inline void __list_del_entry(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+}
+
static inline void list_del(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
@@ -103,6 +108,7 @@
entry->prev = LIST_POISON2;
}
#else
+extern void __list_del_entry(struct list_head *entry);
extern void list_del(struct list_head *entry);
#endif
@@ -135,7 +141,7 @@
*/
static inline void list_del_init(struct list_head *entry)
{
- __list_del(entry->prev, entry->next);
+ __list_del_entry(entry);
INIT_LIST_HEAD(entry);
}
@@ -146,7 +152,7 @@
*/
static inline void list_move(struct list_head *list, struct list_head *head)
{
- __list_del(list->prev, list->next);
+ __list_del_entry(list);
list_add(list, head);
}
@@ -158,7 +164,7 @@
static inline void list_move_tail(struct list_head *list,
struct list_head *head)
{
- __list_del(list->prev, list->next);
+ __list_del_entry(list);
list_add_tail(list, head);
}
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 3fd3684..ef4f0b6 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -71,6 +71,7 @@
u16 irq_masks_cache[WM8994_NUM_IRQ_REGS];
/* Used over suspend/resume */
+ bool suspended;
u16 ldo_regs[WM8994_NUM_LDO_REGS];
u16 gpio_regs[WM8994_NUM_GPIO_REGS];
diff --git a/include/linux/module.h b/include/linux/module.h
index 9bdf27c..5de4204 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -62,7 +62,7 @@
struct module_attribute mattr;
const char *module_name;
const char *version;
-};
+} __attribute__ ((__aligned__(sizeof(void *))));
struct module_kobject
{
diff --git a/include/linux/pm.h b/include/linux/pm.h
index dd9c7ab..21415cc 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -431,6 +431,8 @@
struct list_head entry;
struct completion completion;
struct wakeup_source *wakeup;
+#else
+ unsigned int should_wakeup:1;
#endif
#ifdef CONFIG_PM_RUNTIME
struct timer_list suspend_timer;
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index 9cff00d..03a67db 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -109,11 +109,6 @@
return dev->power.can_wakeup;
}
-static inline bool device_may_wakeup(struct device *dev)
-{
- return false;
-}
-
static inline struct wakeup_source *wakeup_source_create(const char *name)
{
return NULL;
@@ -134,24 +129,32 @@
static inline int device_wakeup_enable(struct device *dev)
{
- return -EINVAL;
+ dev->power.should_wakeup = true;
+ return 0;
}
static inline int device_wakeup_disable(struct device *dev)
{
+ dev->power.should_wakeup = false;
+ return 0;
+}
+
+static inline int device_set_wakeup_enable(struct device *dev, bool enable)
+{
+ dev->power.should_wakeup = enable;
return 0;
}
static inline int device_init_wakeup(struct device *dev, bool val)
{
- dev->power.can_wakeup = val;
- return val ? -EINVAL : 0;
+ device_set_wakeup_capable(dev, val);
+ device_set_wakeup_enable(dev, val);
+ return 0;
}
-
-static inline int device_set_wakeup_enable(struct device *dev, bool enable)
+static inline bool device_may_wakeup(struct device *dev)
{
- return -EINVAL;
+ return dev->power.can_wakeup && dev->power.should_wakeup;
}
static inline void __pm_stay_awake(struct wakeup_source *ws) {}
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 092a04f..a1147e5 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -102,11 +102,8 @@
extern long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
-extern int ptrace_traceme(void);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
-extern int ptrace_attach(struct task_struct *tsk);
-extern int ptrace_detach(struct task_struct *, unsigned int);
extern void ptrace_disable(struct task_struct *);
extern int ptrace_check_attach(struct task_struct *task, int kill);
extern int ptrace_request(struct task_struct *child, long request,
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index d63dcba..9026b30 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -14,10 +14,12 @@
#define LINUX_RIO_REGS_H
/*
- * In RapidIO, each device has a 2MB configuration space that is
+ * In RapidIO, each device has a 16MB configuration space that is
* accessed via maintenance transactions. Portions of configuration
* space are standardized and/or reserved.
*/
+#define RIO_MAINT_SPACE_SZ 0x1000000 /* 16MB of RapidIO mainenance space */
+
#define RIO_DEV_ID_CAR 0x00 /* [I] Device Identity CAR */
#define RIO_DEV_INFO_CAR 0x04 /* [I] Device Information CAR */
#define RIO_ASM_ID_CAR 0x08 /* [I] Assembly Identity CAR */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index a0b639f..89c3e51 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -203,6 +203,18 @@
struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */
int pie_enabled;
struct work_struct irqwork;
+
+
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+ struct work_struct uie_task;
+ struct timer_list uie_timer;
+ /* Those fields are protected by rtc->irq_lock */
+ unsigned int oldsecs;
+ unsigned int uie_irq_active:1;
+ unsigned int stop_uie_polling:1;
+ unsigned int uie_task_active:1;
+ unsigned int uie_timer_active:1;
+#endif
};
#define to_rtc_device(d) container_of(d, struct rtc_device, dev)
@@ -235,7 +247,10 @@
struct rtc_task *task, int freq);
extern int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled);
extern int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled);
+extern int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc,
+ unsigned int enabled);
+void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode);
void rtc_aie_update_irq(void *private);
void rtc_uie_update_irq(void *private);
enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d747f94..777d8a5 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1744,7 +1744,7 @@
#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
#define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */
-#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */
+#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezable */
#define PF_FREEZER_NOSIG 0x80000000 /* Freezer won't send signals to it */
/*
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 8651556..d3ec89f 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -172,6 +172,14 @@
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
const struct thermal_cooling_device_ops *);
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+
+#ifdef CONFIG_NET
extern int generate_netlink_event(u32 orig, enum events event);
+#else
+static inline int generate_netlink_event(u32 orig, enum events event)
+{
+ return 0;
+}
+#endif
#endif /* __THERMAL_H__ */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 1ac1158..f7998a3 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -250,7 +250,7 @@
enum {
WQ_NON_REENTRANT = 1 << 0, /* guarantee non-reentrance */
WQ_UNBOUND = 1 << 1, /* not bound to any cpu */
- WQ_FREEZEABLE = 1 << 2, /* freeze during suspend */
+ WQ_FREEZABLE = 1 << 2, /* freeze during suspend */
WQ_MEM_RECLAIM = 1 << 3, /* may be used for memory reclaim */
WQ_HIGHPRI = 1 << 4, /* high priority */
WQ_CPU_INTENSIVE = 1 << 5, /* cpu instensive workqueue */
@@ -318,7 +318,7 @@
/**
* alloc_ordered_workqueue - allocate an ordered workqueue
* @name: name of the workqueue
- * @flags: WQ_* flags (only WQ_FREEZEABLE and WQ_MEM_RECLAIM are meaningful)
+ * @flags: WQ_* flags (only WQ_FREEZABLE and WQ_MEM_RECLAIM are meaningful)
*
* Allocate an ordered workqueue. An ordered workqueue executes at
* most one work item at any given time in the queued order. They are
@@ -335,8 +335,8 @@
#define create_workqueue(name) \
alloc_workqueue((name), WQ_MEM_RECLAIM, 1)
-#define create_freezeable_workqueue(name) \
- alloc_workqueue((name), WQ_FREEZEABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
+#define create_freezable_workqueue(name) \
+ alloc_workqueue((name), WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
#define create_singlethread_workqueue(name) \
alloc_workqueue((name), WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 4a3cd2c..96e50e0 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -89,6 +89,18 @@
#define IPV6_ADDR_SCOPE_GLOBAL 0x0e
/*
+ * Addr flags
+ */
+#ifdef __KERNEL__
+#define IPV6_ADDR_MC_FLAG_TRANSIENT(a) \
+ ((a)->s6_addr[1] & 0x10)
+#define IPV6_ADDR_MC_FLAG_PREFIX(a) \
+ ((a)->s6_addr[1] & 0x20)
+#define IPV6_ADDR_MC_FLAG_RENDEZVOUS(a) \
+ ((a)->s6_addr[1] & 0x40)
+#endif
+
+/*
* fragmentation header
*/
diff --git a/include/net/netfilter/nf_tproxy_core.h b/include/net/netfilter/nf_tproxy_core.h
index cd85b3b..e505358 100644
--- a/include/net/netfilter/nf_tproxy_core.h
+++ b/include/net/netfilter/nf_tproxy_core.h
@@ -201,18 +201,8 @@
}
#endif
-static inline void
-nf_tproxy_put_sock(struct sock *sk)
-{
- /* TIME_WAIT inet sockets have to be handled differently */
- if ((sk->sk_protocol == IPPROTO_TCP) && (sk->sk_state == TCP_TIME_WAIT))
- inet_twsk_put(inet_twsk(sk));
- else
- sock_put(sk);
-}
-
/* assign a socket to the skb -- consumes sk */
-int
+void
nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk);
#endif
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 160a407..04f8556 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -199,7 +199,7 @@
struct qdisc_skb_cb {
unsigned int pkt_len;
- char data[];
+ long data[];
};
static inline int qdisc_qlen(struct Qdisc *q)
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 8479b66..3fd5064 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -261,6 +261,7 @@
#define CONF_ENABLE_ESR 0x0008
#define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ
* (CONF_ENABLE_IRQ) in use */
+#define CONF_ENABLE_ZVCARD 0x0020
/* flags used by pcmcia_loop_config() autoconfiguration */
#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
index b4a0db2..1eeebd5 100644
--- a/include/sound/wm8903.h
+++ b/include/sound/wm8903.h
@@ -17,13 +17,9 @@
/*
* R6 (0x06) - Mic Bias Control 0
*/
-#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_MASK 0x0030 /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_WIDTH 2 /* MICDET_THR - [5:4] */
#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 07fdfb6..0828b6c8 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -8,7 +8,6 @@
#include <scsi/scsi_cmnd.h>
#include <net/sock.h>
#include <net/tcp.h>
-#include "target_core_mib.h"
#define TARGET_CORE_MOD_VERSION "v4.0.0-rc6"
#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGABRT))
@@ -195,6 +194,21 @@
SAM_TASK_ATTR_EMULATED
} t10_task_attr_index_t;
+/*
+ * Used for target SCSI statistics
+ */
+typedef enum {
+ SCSI_INST_INDEX,
+ SCSI_DEVICE_INDEX,
+ SCSI_AUTH_INTR_INDEX,
+ SCSI_INDEX_TYPE_MAX
+} scsi_index_t;
+
+struct scsi_index_table {
+ spinlock_t lock;
+ u32 scsi_mib_index[SCSI_INDEX_TYPE_MAX];
+} ____cacheline_aligned;
+
struct se_cmd;
struct t10_alua {
@@ -578,8 +592,6 @@
spinlock_t stats_lock;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t acl_pr_ref_count;
- /* Used for MIB access */
- atomic_t mib_ref_count;
struct se_dev_entry *device_list;
struct se_session *nacl_sess;
struct se_portal_group *se_tpg;
@@ -595,8 +607,6 @@
} ____cacheline_aligned;
struct se_session {
- /* Used for MIB access */
- atomic_t mib_ref_count;
u64 sess_bin_isid;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
@@ -806,7 +816,6 @@
/* Virtual iSCSI devices attached. */
u32 dev_count;
u32 hba_index;
- atomic_t dev_mib_access_count;
atomic_t load_balance_queue;
atomic_t left_queue_depth;
/* Maximum queue depth the HBA can handle. */
@@ -845,6 +854,12 @@
#define SE_LUN(c) ((struct se_lun *)(c)->se_lun)
+struct scsi_port_stats {
+ u64 cmd_pdus;
+ u64 tx_data_octets;
+ u64 rx_data_octets;
+} ____cacheline_aligned;
+
struct se_port {
/* RELATIVE TARGET PORT IDENTIFER */
u16 sep_rtpi;
@@ -867,6 +882,7 @@
} ____cacheline_aligned;
struct se_tpg_np {
+ struct se_portal_group *tpg_np_parent;
struct config_group tpg_np_group;
} ____cacheline_aligned;
diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h
index 66f44e5..2469405 100644
--- a/include/target/target_core_transport.h
+++ b/include/target/target_core_transport.h
@@ -111,6 +111,8 @@
extern int init_se_global(void);
extern void release_se_global(void);
+extern void init_scsi_index_table(void);
+extern u32 scsi_get_new_index(scsi_index_t);
extern void transport_init_queue_obj(struct se_queue_obj *);
extern int transport_subsystem_check_init(void);
extern int transport_subsystem_register(struct se_subsystem_api *);
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index aba421d..78f18ad 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -31,7 +31,7 @@
0 : blk_rq_sectors(rq);
__entry->errors = rq->errors;
- blk_fill_rwbs_rq(__entry->rwbs, rq);
+ blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
blk_dump_cmd(__get_str(cmd), rq);
),
@@ -118,7 +118,7 @@
__entry->bytes = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
blk_rq_bytes(rq) : 0;
- blk_fill_rwbs_rq(__entry->rwbs, rq);
+ blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
blk_dump_cmd(__get_str(cmd), rq);
memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
),
@@ -563,7 +563,7 @@
__entry->nr_sector = blk_rq_sectors(rq);
__entry->old_dev = dev;
__entry->old_sector = from;
- blk_fill_rwbs_rq(__entry->rwbs, rq);
+ blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
),
TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 4349935..e92e981 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1575,8 +1575,10 @@
return -ENODEV;
trialcs = alloc_trial_cpuset(cs);
- if (!trialcs)
- return -ENOMEM;
+ if (!trialcs) {
+ retval = -ENOMEM;
+ goto out;
+ }
switch (cft->private) {
case FILE_CPULIST:
@@ -1591,6 +1593,7 @@
}
free_trial_cpuset(trialcs);
+out:
cgroup_unlock();
return retval;
}
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 4571ae7..99c3bc8 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -3,6 +3,12 @@
*/
#include <linux/irqdesc.h>
+#ifdef CONFIG_SPARSE_IRQ
+# define IRQ_BITMAP_BITS (NR_IRQS + 8196)
+#else
+# define IRQ_BITMAP_BITS NR_IRQS
+#endif
+
extern int noirqdebug;
#define irq_data_to_desc(data) container_of(data, struct irq_desc, irq_data)
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 282f202..2039bea 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -94,7 +94,7 @@
EXPORT_SYMBOL_GPL(nr_irqs);
static DEFINE_MUTEX(sparse_irq_lock);
-static DECLARE_BITMAP(allocated_irqs, NR_IRQS);
+static DECLARE_BITMAP(allocated_irqs, IRQ_BITMAP_BITS);
#ifdef CONFIG_SPARSE_IRQ
@@ -217,6 +217,15 @@
initcnt = arch_probe_nr_irqs();
printk(KERN_INFO "NR_IRQS:%d nr_irqs:%d %d\n", NR_IRQS, nr_irqs, initcnt);
+ if (WARN_ON(nr_irqs > IRQ_BITMAP_BITS))
+ nr_irqs = IRQ_BITMAP_BITS;
+
+ if (WARN_ON(initcnt > IRQ_BITMAP_BITS))
+ initcnt = IRQ_BITMAP_BITS;
+
+ if (initcnt > nr_irqs)
+ nr_irqs = initcnt;
+
for (i = 0; i < initcnt; i++) {
desc = alloc_desc(i, node);
set_bit(i, allocated_irqs);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0caa59f..9033c1c 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1100,7 +1100,7 @@
if (retval)
kfree(action);
-#ifdef CONFIG_DEBUG_SHIRQ
+#ifdef CONFIG_DEBUG_SHIRQ_FIXME
if (!retval && (irqflags & IRQF_SHARED)) {
/*
* It's a shared IRQ -- the driver ought to be prepared for it
diff --git a/kernel/irq/resend.c b/kernel/irq/resend.c
index 891115a..dc49358 100644
--- a/kernel/irq/resend.c
+++ b/kernel/irq/resend.c
@@ -23,7 +23,7 @@
#ifdef CONFIG_HARDIRQS_SW_RESEND
/* Bitmap to handle software resend of interrupts: */
-static DECLARE_BITMAP(irqs_resend, NR_IRQS);
+static DECLARE_BITMAP(irqs_resend, IRQ_BITMAP_BITS);
/*
* Run software resends of IRQ's
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 999835b..656222f 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -782,6 +782,10 @@
raw_spin_unlock_irq(&ctx->lock);
}
+#define MAX_INTERRUPTS (~0ULL)
+
+static void perf_log_throttle(struct perf_event *event, int enable);
+
static int
event_sched_in(struct perf_event *event,
struct perf_cpu_context *cpuctx,
@@ -794,6 +798,17 @@
event->state = PERF_EVENT_STATE_ACTIVE;
event->oncpu = smp_processor_id();
+
+ /*
+ * Unthrottle events, since we scheduled we might have missed several
+ * ticks already, also for a heavily scheduling task there is little
+ * guarantee it'll get a tick in a timely manner.
+ */
+ if (unlikely(event->hw.interrupts == MAX_INTERRUPTS)) {
+ perf_log_throttle(event, 1);
+ event->hw.interrupts = 0;
+ }
+
/*
* The new state must be visible before we turn it on in the hardware:
*/
@@ -1596,10 +1611,6 @@
}
}
-#define MAX_INTERRUPTS (~0ULL)
-
-static void perf_log_throttle(struct perf_event *event, int enable);
-
static u64 perf_calculate_period(struct perf_event *event, u64 nsec, u64 count)
{
u64 frequency = event->attr.sample_freq;
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 7b5db6a..7018530 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -326,7 +326,7 @@
static int __init pm_start_workqueue(void)
{
- pm_wq = alloc_workqueue("pm", WQ_FREEZEABLE, 0);
+ pm_wq = alloc_workqueue("pm", WQ_FREEZABLE, 0);
return pm_wq ? 0 : -ENOMEM;
}
diff --git a/kernel/power/process.c b/kernel/power/process.c
index d6d2a10..0cf3a27 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -22,7 +22,7 @@
*/
#define TIMEOUT (20 * HZ)
-static inline int freezeable(struct task_struct * p)
+static inline int freezable(struct task_struct * p)
{
if ((p == current) ||
(p->flags & PF_NOFREEZE) ||
@@ -53,7 +53,7 @@
todo = 0;
read_lock(&tasklist_lock);
do_each_thread(g, p) {
- if (frozen(p) || !freezeable(p))
+ if (frozen(p) || !freezable(p))
continue;
if (!freeze_task(p, sig_only))
@@ -167,7 +167,7 @@
read_lock(&tasklist_lock);
do_each_thread(g, p) {
- if (!freezeable(p))
+ if (!freezable(p))
continue;
if (nosig_only && should_send_signal(p))
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 0dac75e..64db648 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1519,11 +1519,8 @@
swsusp_alloc(struct memory_bitmap *orig_bm, struct memory_bitmap *copy_bm,
unsigned int nr_pages, unsigned int nr_highmem)
{
- int error = 0;
-
if (nr_highmem > 0) {
- error = get_highmem_buffer(PG_ANY);
- if (error)
+ if (get_highmem_buffer(PG_ANY))
goto err_out;
if (nr_highmem > alloc_highmem) {
nr_highmem -= alloc_highmem;
@@ -1546,7 +1543,7 @@
err_out:
swsusp_free();
- return error;
+ return -ENOMEM;
}
asmlinkage int swsusp_save(void)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 1708b1e..e2302e4 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -163,7 +163,7 @@
return !err;
}
-int ptrace_attach(struct task_struct *task)
+static int ptrace_attach(struct task_struct *task)
{
int retval;
@@ -219,7 +219,7 @@
* Performs checks and sets PT_PTRACED.
* Should be used by all ptrace implementations for PTRACE_TRACEME.
*/
-int ptrace_traceme(void)
+static int ptrace_traceme(void)
{
int ret = -EPERM;
@@ -293,7 +293,7 @@
return false;
}
-int ptrace_detach(struct task_struct *child, unsigned int data)
+static int ptrace_detach(struct task_struct *child, unsigned int data)
{
bool dead = false;
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 48b2761..a3b5aff 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -600,4 +600,14 @@
return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT;
}
+/*
+ * Check whether the broadcast device supports oneshot.
+ */
+bool tick_broadcast_oneshot_available(void)
+{
+ struct clock_event_device *bc = tick_broadcast_device.evtdev;
+
+ return bc ? bc->features & CLOCK_EVT_FEAT_ONESHOT : false;
+}
+
#endif
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 051bc80..ed228ef 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -51,7 +51,11 @@
{
struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev);
- return dev && (dev->features & CLOCK_EVT_FEAT_ONESHOT);
+ if (!dev || !(dev->features & CLOCK_EVT_FEAT_ONESHOT))
+ return 0;
+ if (!(dev->features & CLOCK_EVT_FEAT_C3STOP))
+ return 1;
+ return tick_broadcast_oneshot_available();
}
/*
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 290eefb..f65d3a7 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -36,6 +36,7 @@
extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc);
extern int tick_broadcast_oneshot_active(void);
extern void tick_check_oneshot_broadcast(int cpu);
+bool tick_broadcast_oneshot_available(void);
# else /* BROADCAST */
static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
@@ -46,6 +47,7 @@
static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
static inline int tick_broadcast_oneshot_active(void) { return 0; }
static inline void tick_check_oneshot_broadcast(int cpu) { }
+static inline bool tick_broadcast_oneshot_available(void) { return true; }
# endif /* !BROADCAST */
#else /* !ONESHOT */
@@ -76,6 +78,7 @@
return 0;
}
static inline int tick_broadcast_oneshot_active(void) { return 0; }
+static inline bool tick_broadcast_oneshot_available(void) { return false; }
#endif /* !TICK_ONESHOT */
/*
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index d95721f..cbafed7 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1827,21 +1827,5 @@
rwbs[i] = '\0';
}
-void blk_fill_rwbs_rq(char *rwbs, struct request *rq)
-{
- int rw = rq->cmd_flags & 0x03;
- int bytes;
-
- if (rq->cmd_flags & REQ_DISCARD)
- rw |= REQ_DISCARD;
-
- if (rq->cmd_flags & REQ_SECURE)
- rw |= REQ_SECURE;
-
- bytes = blk_rq_bytes(rq);
-
- blk_fill_rwbs(rwbs, rw, bytes);
-}
-
#endif /* CONFIG_EVENT_TRACING */
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 11869fa..ee6578b 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -79,7 +79,9 @@
MAX_IDLE_WORKERS_RATIO = 4, /* 1/4 of busy can be idle */
IDLE_WORKER_TIMEOUT = 300 * HZ, /* keep idle ones for 5 mins */
- MAYDAY_INITIAL_TIMEOUT = HZ / 100, /* call for help after 10ms */
+ MAYDAY_INITIAL_TIMEOUT = HZ / 100 >= 2 ? HZ / 100 : 2,
+ /* call for help after 10ms
+ (min two ticks) */
MAYDAY_INTERVAL = HZ / 10, /* and then every 100ms */
CREATE_COOLDOWN = HZ, /* time to breath after fail */
TRUSTEE_COOLDOWN = HZ / 10, /* for trustee draining */
@@ -2047,6 +2049,15 @@
move_linked_works(work, scheduled, &n);
process_scheduled_works(rescuer);
+
+ /*
+ * Leave this gcwq. If keep_working() is %true, notify a
+ * regular worker; otherwise, we end up with 0 concurrency
+ * and stalling the execution.
+ */
+ if (keep_working(gcwq))
+ wake_up_worker(gcwq);
+
spin_unlock_irq(&gcwq->lock);
}
@@ -2956,7 +2967,7 @@
*/
spin_lock(&workqueue_lock);
- if (workqueue_freezing && wq->flags & WQ_FREEZEABLE)
+ if (workqueue_freezing && wq->flags & WQ_FREEZABLE)
for_each_cwq_cpu(cpu, wq)
get_cwq(cpu, wq)->max_active = 0;
@@ -3068,7 +3079,7 @@
spin_lock_irq(&gcwq->lock);
- if (!(wq->flags & WQ_FREEZEABLE) ||
+ if (!(wq->flags & WQ_FREEZABLE) ||
!(gcwq->flags & GCWQ_FREEZING))
get_cwq(gcwq->cpu, wq)->max_active = max_active;
@@ -3318,7 +3329,7 @@
* want to get it over with ASAP - spam rescuers, wake up as
* many idlers as necessary and create new ones till the
* worklist is empty. Note that if the gcwq is frozen, there
- * may be frozen works in freezeable cwqs. Don't declare
+ * may be frozen works in freezable cwqs. Don't declare
* completion while frozen.
*/
while (gcwq->nr_workers != gcwq->nr_idle ||
@@ -3576,9 +3587,9 @@
/**
* freeze_workqueues_begin - begin freezing workqueues
*
- * Start freezing workqueues. After this function returns, all
- * freezeable workqueues will queue new works to their frozen_works
- * list instead of gcwq->worklist.
+ * Start freezing workqueues. After this function returns, all freezable
+ * workqueues will queue new works to their frozen_works list instead of
+ * gcwq->worklist.
*
* CONTEXT:
* Grabs and releases workqueue_lock and gcwq->lock's.
@@ -3604,7 +3615,7 @@
list_for_each_entry(wq, &workqueues, list) {
struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
- if (cwq && wq->flags & WQ_FREEZEABLE)
+ if (cwq && wq->flags & WQ_FREEZABLE)
cwq->max_active = 0;
}
@@ -3615,7 +3626,7 @@
}
/**
- * freeze_workqueues_busy - are freezeable workqueues still busy?
+ * freeze_workqueues_busy - are freezable workqueues still busy?
*
* Check whether freezing is complete. This function must be called
* between freeze_workqueues_begin() and thaw_workqueues().
@@ -3624,8 +3635,8 @@
* Grabs and releases workqueue_lock.
*
* RETURNS:
- * %true if some freezeable workqueues are still busy. %false if
- * freezing is complete.
+ * %true if some freezable workqueues are still busy. %false if freezing
+ * is complete.
*/
bool freeze_workqueues_busy(void)
{
@@ -3645,7 +3656,7 @@
list_for_each_entry(wq, &workqueues, list) {
struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
- if (!cwq || !(wq->flags & WQ_FREEZEABLE))
+ if (!cwq || !(wq->flags & WQ_FREEZABLE))
continue;
BUG_ON(cwq->nr_active < 0);
@@ -3690,7 +3701,7 @@
list_for_each_entry(wq, &workqueues, list) {
struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
- if (!cwq || !(wq->flags & WQ_FREEZEABLE))
+ if (!cwq || !(wq->flags & WQ_FREEZABLE))
continue;
/* restore max_active and repopulate worklist */
diff --git a/lib/list_debug.c b/lib/list_debug.c
index 344c710..b8029a5 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -35,6 +35,31 @@
}
EXPORT_SYMBOL(__list_add);
+void __list_del_entry(struct list_head *entry)
+{
+ struct list_head *prev, *next;
+
+ prev = entry->prev;
+ next = entry->next;
+
+ if (WARN(next == LIST_POISON1,
+ "list_del corruption, %p->next is LIST_POISON1 (%p)\n",
+ entry, LIST_POISON1) ||
+ WARN(prev == LIST_POISON2,
+ "list_del corruption, %p->prev is LIST_POISON2 (%p)\n",
+ entry, LIST_POISON2) ||
+ WARN(prev->next != entry,
+ "list_del corruption. prev->next should be %p, "
+ "but was %p\n", entry, prev->next) ||
+ WARN(next->prev != entry,
+ "list_del corruption. next->prev should be %p, "
+ "but was %p\n", entry, next->prev))
+ return;
+
+ __list_del(prev, next);
+}
+EXPORT_SYMBOL(__list_del_entry);
+
/**
* list_del - deletes entry from list.
* @entry: the element to delete from the list.
@@ -43,19 +68,7 @@
*/
void list_del(struct list_head *entry)
{
- WARN(entry->next == LIST_POISON1,
- "list_del corruption, next is LIST_POISON1 (%p)\n",
- LIST_POISON1);
- WARN(entry->next != LIST_POISON1 && entry->prev == LIST_POISON2,
- "list_del corruption, prev is LIST_POISON2 (%p)\n",
- LIST_POISON2);
- WARN(entry->prev->next != entry,
- "list_del corruption. prev->next should be %p, "
- "but was %p\n", entry, entry->prev->next);
- WARN(entry->next->prev != entry,
- "list_del corruption. next->prev should be %p, "
- "but was %p\n", entry, entry->next->prev);
- __list_del(entry->prev, entry->next);
+ __list_del_entry(entry);
entry->next = LIST_POISON1;
entry->prev = LIST_POISON2;
}
diff --git a/lib/nlattr.c b/lib/nlattr.c
index 5021cbc..ac09f22 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -148,7 +148,7 @@
{
int i, len = 0;
- for (i = 0; i < n; i++) {
+ for (i = 0; i < n; i++, p++) {
if (p->len)
len += nla_total_size(p->len);
else if (nla_attr_minlen[p->type])
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index c47bbe1..93ca08b 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -686,8 +686,10 @@
/*
* Ensure that the address returned is DMA'ble
*/
- if (!dma_capable(dev, dev_addr, size))
- panic("map_single: bounce buffer is not DMA'ble");
+ if (!dma_capable(dev, dev_addr, size)) {
+ swiotlb_tbl_unmap_single(dev, map, size, dir);
+ dev_addr = swiotlb_virt_to_bus(dev, io_tlb_overflow_buffer);
+ }
return dev_addr;
}
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 3e29781..dbe99a5 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -650,10 +650,10 @@
static inline struct page *alloc_hugepage_vma(int defrag,
struct vm_area_struct *vma,
- unsigned long haddr)
+ unsigned long haddr, int nd)
{
return alloc_pages_vma(alloc_hugepage_gfpmask(defrag),
- HPAGE_PMD_ORDER, vma, haddr);
+ HPAGE_PMD_ORDER, vma, haddr, nd);
}
#ifndef CONFIG_NUMA
@@ -678,7 +678,7 @@
if (unlikely(khugepaged_enter(vma)))
return VM_FAULT_OOM;
page = alloc_hugepage_vma(transparent_hugepage_defrag(vma),
- vma, haddr);
+ vma, haddr, numa_node_id());
if (unlikely(!page))
goto out;
if (unlikely(mem_cgroup_newpage_charge(page, mm, GFP_KERNEL))) {
@@ -799,8 +799,8 @@
}
for (i = 0; i < HPAGE_PMD_NR; i++) {
- pages[i] = alloc_page_vma(GFP_HIGHUSER_MOVABLE,
- vma, address);
+ pages[i] = alloc_page_vma_node(GFP_HIGHUSER_MOVABLE,
+ vma, address, page_to_nid(page));
if (unlikely(!pages[i] ||
mem_cgroup_newpage_charge(pages[i], mm,
GFP_KERNEL))) {
@@ -902,7 +902,7 @@
if (transparent_hugepage_enabled(vma) &&
!transparent_hugepage_debug_cow())
new_page = alloc_hugepage_vma(transparent_hugepage_defrag(vma),
- vma, haddr);
+ vma, haddr, numa_node_id());
else
new_page = NULL;
@@ -1745,7 +1745,8 @@
static void collapse_huge_page(struct mm_struct *mm,
unsigned long address,
struct page **hpage,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma,
+ int node)
{
pgd_t *pgd;
pud_t *pud;
@@ -1773,7 +1774,8 @@
* mmap_sem in read mode is good idea also to allow greater
* scalability.
*/
- new_page = alloc_hugepage_vma(khugepaged_defrag(), vma, address);
+ new_page = alloc_hugepage_vma(khugepaged_defrag(), vma, address,
+ node);
if (unlikely(!new_page)) {
up_read(&mm->mmap_sem);
*hpage = ERR_PTR(-ENOMEM);
@@ -1919,6 +1921,7 @@
struct page *page;
unsigned long _address;
spinlock_t *ptl;
+ int node = -1;
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
@@ -1949,6 +1952,13 @@
page = vm_normal_page(vma, _address, pteval);
if (unlikely(!page))
goto out_unmap;
+ /*
+ * Chose the node of the first page. This could
+ * be more sophisticated and look at more pages,
+ * but isn't for now.
+ */
+ if (node == -1)
+ node = page_to_nid(page);
VM_BUG_ON(PageCompound(page));
if (!PageLRU(page) || PageLocked(page) || !PageAnon(page))
goto out_unmap;
@@ -1965,7 +1975,7 @@
pte_unmap_unlock(pte, ptl);
if (ret)
/* collapse_huge_page will return with the mmap_sem released */
- collapse_huge_page(mm, address, hpage, vma);
+ collapse_huge_page(mm, address, hpage, vma, node);
out:
return ret;
}
diff --git a/mm/memory.c b/mm/memory.c
index 8e8c1832..5823698 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2648,6 +2648,7 @@
details.last_index = ULONG_MAX;
details.i_mmap_lock = &mapping->i_mmap_lock;
+ mutex_lock(&mapping->unmap_mutex);
spin_lock(&mapping->i_mmap_lock);
/* Protect against endless unmapping loops */
@@ -2664,6 +2665,7 @@
if (unlikely(!list_empty(&mapping->i_mmap_nonlinear)))
unmap_mapping_range_list(&mapping->i_mmap_nonlinear, &details);
spin_unlock(&mapping->i_mmap_lock);
+ mutex_unlock(&mapping->unmap_mutex);
}
EXPORT_SYMBOL(unmap_mapping_range);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 368fc9d..b53ec99 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1524,10 +1524,9 @@
}
/* Return a zonelist indicated by gfp for node representing a mempolicy */
-static struct zonelist *policy_zonelist(gfp_t gfp, struct mempolicy *policy)
+static struct zonelist *policy_zonelist(gfp_t gfp, struct mempolicy *policy,
+ int nd)
{
- int nd = numa_node_id();
-
switch (policy->mode) {
case MPOL_PREFERRED:
if (!(policy->flags & MPOL_F_LOCAL))
@@ -1679,7 +1678,7 @@
zl = node_zonelist(interleave_nid(*mpol, vma, addr,
huge_page_shift(hstate_vma(vma))), gfp_flags);
} else {
- zl = policy_zonelist(gfp_flags, *mpol);
+ zl = policy_zonelist(gfp_flags, *mpol, numa_node_id());
if ((*mpol)->mode == MPOL_BIND)
*nodemask = &(*mpol)->v.nodes;
}
@@ -1820,7 +1819,7 @@
*/
struct page *
alloc_pages_vma(gfp_t gfp, int order, struct vm_area_struct *vma,
- unsigned long addr)
+ unsigned long addr, int node)
{
struct mempolicy *pol = get_vma_policy(current, vma, addr);
struct zonelist *zl;
@@ -1830,13 +1829,13 @@
if (unlikely(pol->mode == MPOL_INTERLEAVE)) {
unsigned nid;
- nid = interleave_nid(pol, vma, addr, PAGE_SHIFT);
+ nid = interleave_nid(pol, vma, addr, PAGE_SHIFT + order);
mpol_cond_put(pol);
page = alloc_page_interleave(gfp, order, nid);
put_mems_allowed();
return page;
}
- zl = policy_zonelist(gfp, pol);
+ zl = policy_zonelist(gfp, pol, node);
if (unlikely(mpol_needs_cond_ref(pol))) {
/*
* slow path: ref counted shared policy
@@ -1892,7 +1891,8 @@
page = alloc_page_interleave(gfp, order, interleave_nodes(pol));
else
page = __alloc_pages_nodemask(gfp, order,
- policy_zonelist(gfp, pol), policy_nodemask(gfp, pol));
+ policy_zonelist(gfp, pol, numa_node_id()),
+ policy_nodemask(gfp, pol));
put_mems_allowed();
return page;
}
diff --git a/mm/migrate.c b/mm/migrate.c
index 7661152..352de555 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1287,14 +1287,14 @@
return -EPERM;
/* Find the mm_struct */
- read_lock(&tasklist_lock);
+ rcu_read_lock();
task = pid ? find_task_by_vpid(pid) : current;
if (!task) {
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return -ESRCH;
}
mm = get_task_mm(task);
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
if (!mm)
return -EINVAL;
diff --git a/mm/mremap.c b/mm/mremap.c
index 9925b63..1de98d4 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -94,9 +94,7 @@
*/
mapping = vma->vm_file->f_mapping;
spin_lock(&mapping->i_mmap_lock);
- if (new_vma->vm_truncate_count &&
- new_vma->vm_truncate_count != vma->vm_truncate_count)
- new_vma->vm_truncate_count = 0;
+ new_vma->vm_truncate_count = 0;
}
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a873e61..cdef1d4 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5376,10 +5376,9 @@
for (found = 0, iter = 0; iter < pageblock_nr_pages; iter++) {
unsigned long check = pfn + iter;
- if (!pfn_valid_within(check)) {
- iter++;
+ if (!pfn_valid_within(check))
continue;
- }
+
page = pfn_to_page(check);
if (!page_count(page)) {
if (PageBuddy(page))
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 07a458d..0341c57 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1940,7 +1940,7 @@
error = -EINVAL;
if (S_ISBLK(inode->i_mode)) {
- bdev = I_BDEV(inode);
+ bdev = bdgrab(I_BDEV(inode));
error = blkdev_get(bdev, FMODE_READ | FMODE_WRITE | FMODE_EXCL,
sys_swapon);
if (error < 0) {
diff --git a/mm/truncate.c b/mm/truncate.c
index 49feb46..d64296b 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -225,6 +225,7 @@
next = start;
while (next <= end &&
pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) {
+ mem_cgroup_uncharge_start();
for (i = 0; i < pagevec_count(&pvec); i++) {
struct page *page = pvec.pages[i];
pgoff_t page_index = page->index;
@@ -247,6 +248,7 @@
unlock_page(page);
}
pagevec_release(&pvec);
+ mem_cgroup_uncharge_end();
cond_resched();
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 17497d0..6771ea7 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1841,16 +1841,28 @@
if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION))
return false;
- /*
- * If we failed to reclaim and have scanned the full list, stop.
- * NOTE: Checking just nr_reclaimed would exit reclaim/compaction far
- * faster but obviously would be less likely to succeed
- * allocation. If this is desirable, use GFP_REPEAT to decide
- * if both reclaimed and scanned should be checked or just
- * reclaimed
- */
- if (!nr_reclaimed && !nr_scanned)
- return false;
+ /* Consider stopping depending on scan and reclaim activity */
+ if (sc->gfp_mask & __GFP_REPEAT) {
+ /*
+ * For __GFP_REPEAT allocations, stop reclaiming if the
+ * full LRU list has been scanned and we are still failing
+ * to reclaim pages. This full LRU scan is potentially
+ * expensive but a __GFP_REPEAT caller really wants to succeed
+ */
+ if (!nr_reclaimed && !nr_scanned)
+ return false;
+ } else {
+ /*
+ * For non-__GFP_REPEAT allocations which can presumably
+ * fail without consequence, stop if we failed to reclaim
+ * any pages from the last SWAP_CLUSTER_MAX number of
+ * pages that were scanned. This will return to the
+ * caller faster at the risk reclaim/compaction and
+ * the resulting allocation attempt fails
+ */
+ if (!nr_reclaimed)
+ return false;
+ }
/*
* If we have not reclaimed enough pages for compaction and the
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 7550abb..675614e 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -859,6 +859,7 @@
result = L2CAP_CR_SEC_BLOCK;
else
result = L2CAP_CR_BAD_PSM;
+ sk->sk_state = BT_DISCONN;
rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 2575c2d..d7b9af4 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -727,7 +727,9 @@
break;
}
+ tty_unlock();
schedule();
+ tty_lock();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->wait, &wait);
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 6f6d8e1..88e4aa9 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -80,7 +80,7 @@
if (is_multicast_ether_addr(dest)) {
mdst = br_mdb_get(br, skb);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) {
- if ((mdst && !hlist_unhashed(&mdst->mglist)) ||
+ if ((mdst && mdst->mglist) ||
br_multicast_is_router(br))
skb2 = skb;
br_multicast_forward(mdst, skb, skb2);
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index f701a21..030a002 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -37,10 +37,9 @@
rcu_dereference_protected(X, lockdep_is_held(&br->multicast_lock))
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-static inline int ipv6_is_local_multicast(const struct in6_addr *addr)
+static inline int ipv6_is_transient_multicast(const struct in6_addr *addr)
{
- if (ipv6_addr_is_multicast(addr) &&
- IPV6_ADDR_MC_SCOPE(addr) <= IPV6_ADDR_SCOPE_LINKLOCAL)
+ if (ipv6_addr_is_multicast(addr) && IPV6_ADDR_MC_FLAG_TRANSIENT(addr))
return 1;
return 0;
}
@@ -232,8 +231,7 @@
if (!netif_running(br->dev) || timer_pending(&mp->timer))
goto out;
- if (!hlist_unhashed(&mp->mglist))
- hlist_del_init(&mp->mglist);
+ mp->mglist = false;
if (mp->ports)
goto out;
@@ -276,7 +274,7 @@
del_timer(&p->query_timer);
call_rcu_bh(&p->rcu, br_multicast_free_pg);
- if (!mp->ports && hlist_unhashed(&mp->mglist) &&
+ if (!mp->ports && !mp->mglist &&
netif_running(br->dev))
mod_timer(&mp->timer, jiffies);
@@ -436,7 +434,6 @@
eth = eth_hdr(skb);
memcpy(eth->h_source, br->dev->dev_addr, 6);
- ipv6_eth_mc_map(group, eth->h_dest);
eth->h_proto = htons(ETH_P_IPV6);
skb_put(skb, sizeof(*eth));
@@ -448,8 +445,10 @@
ip6h->payload_len = htons(8 + sizeof(*mldq));
ip6h->nexthdr = IPPROTO_HOPOPTS;
ip6h->hop_limit = 1;
- ipv6_addr_set(&ip6h->saddr, 0, 0, 0, 0);
+ ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
+ &ip6h->saddr);
ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1));
+ ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest);
hopopt = (u8 *)(ip6h + 1);
hopopt[0] = IPPROTO_ICMPV6; /* next hdr */
@@ -528,7 +527,7 @@
struct net_bridge *br = mp->br;
spin_lock(&br->multicast_lock);
- if (!netif_running(br->dev) || hlist_unhashed(&mp->mglist) ||
+ if (!netif_running(br->dev) || !mp->mglist ||
mp->queries_sent >= br->multicast_last_member_count)
goto out;
@@ -719,7 +718,7 @@
goto err;
if (!port) {
- hlist_add_head(&mp->mglist, &br->mglist);
+ mp->mglist = true;
mod_timer(&mp->timer, now + br->multicast_membership_interval);
goto out;
}
@@ -781,11 +780,11 @@
{
struct br_ip br_group;
- if (ipv6_is_local_multicast(group))
+ if (!ipv6_is_transient_multicast(group))
return 0;
ipv6_addr_copy(&br_group.u.ip6, group);
- br_group.proto = htons(ETH_P_IP);
+ br_group.proto = htons(ETH_P_IPV6);
return br_multicast_add_group(br, port, &br_group);
}
@@ -1014,18 +1013,19 @@
nsrcs = skb_header_pointer(skb,
len + offsetof(struct mld2_grec,
- grec_mca),
+ grec_nsrcs),
sizeof(_nsrcs), &_nsrcs);
if (!nsrcs)
return -EINVAL;
if (!pskb_may_pull(skb,
len + sizeof(*grec) +
- sizeof(struct in6_addr) * (*nsrcs)))
+ sizeof(struct in6_addr) * ntohs(*nsrcs)))
return -EINVAL;
grec = (struct mld2_grec *)(skb->data + len);
- len += sizeof(*grec) + sizeof(struct in6_addr) * (*nsrcs);
+ len += sizeof(*grec) +
+ sizeof(struct in6_addr) * ntohs(*nsrcs);
/* We treat these as MLDv1 reports for now. */
switch (grec->grec_type) {
@@ -1165,7 +1165,7 @@
max_delay *= br->multicast_last_member_count;
- if (!hlist_unhashed(&mp->mglist) &&
+ if (mp->mglist &&
(timer_pending(&mp->timer) ?
time_after(mp->timer.expires, now + max_delay) :
try_to_del_timer_sync(&mp->timer) >= 0))
@@ -1177,7 +1177,7 @@
if (timer_pending(&p->timer) ?
time_after(p->timer.expires, now + max_delay) :
try_to_del_timer_sync(&p->timer) >= 0)
- mod_timer(&mp->timer, now + max_delay);
+ mod_timer(&p->timer, now + max_delay);
}
out:
@@ -1236,7 +1236,7 @@
goto out;
max_delay *= br->multicast_last_member_count;
- if (!hlist_unhashed(&mp->mglist) &&
+ if (mp->mglist &&
(timer_pending(&mp->timer) ?
time_after(mp->timer.expires, now + max_delay) :
try_to_del_timer_sync(&mp->timer) >= 0))
@@ -1248,7 +1248,7 @@
if (timer_pending(&p->timer) ?
time_after(p->timer.expires, now + max_delay) :
try_to_del_timer_sync(&p->timer) >= 0)
- mod_timer(&mp->timer, now + max_delay);
+ mod_timer(&p->timer, now + max_delay);
}
out:
@@ -1283,7 +1283,7 @@
br->multicast_last_member_interval;
if (!port) {
- if (!hlist_unhashed(&mp->mglist) &&
+ if (mp->mglist &&
(timer_pending(&mp->timer) ?
time_after(mp->timer.expires, time) :
try_to_del_timer_sync(&mp->timer) >= 0)) {
@@ -1341,7 +1341,7 @@
{
struct br_ip br_group;
- if (ipv6_is_local_multicast(group))
+ if (!ipv6_is_transient_multicast(group))
return;
ipv6_addr_copy(&br_group.u.ip6, group);
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 84aac77..4e1b620 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -84,13 +84,13 @@
struct net_bridge_mdb_entry
{
struct hlist_node hlist[2];
- struct hlist_node mglist;
struct net_bridge *br;
struct net_bridge_port_group __rcu *ports;
struct rcu_head rcu;
struct timer_list timer;
struct timer_list query_timer;
struct br_ip addr;
+ bool mglist;
u32 queries_sent;
};
@@ -238,7 +238,6 @@
spinlock_t multicast_lock;
struct net_bridge_mdb_htable __rcu *mdb;
struct hlist_head router_list;
- struct hlist_head mglist;
struct timer_list multicast_router_timer;
struct timer_list multicast_querier_timer;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index dff633d..05f3578 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -252,8 +252,12 @@
{
struct kvec iov = {buf, len};
struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+ int r;
- return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+ r = kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+ if (r == -EAGAIN)
+ r = 0;
+ return r;
}
/*
@@ -264,13 +268,17 @@
size_t kvlen, size_t len, int more)
{
struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+ int r;
if (more)
msg.msg_flags |= MSG_MORE;
else
msg.msg_flags |= MSG_EOR; /* superfluous, but what the hell */
- return kernel_sendmsg(sock, &msg, iov, kvlen, len);
+ r = kernel_sendmsg(sock, &msg, iov, kvlen, len);
+ if (r == -EAGAIN)
+ r = 0;
+ return r;
}
@@ -328,7 +336,6 @@
ceph_msg_put(con->out_msg);
con->out_msg = NULL;
}
- con->out_keepalive_pending = false;
con->in_seq = 0;
con->in_seq_acked = 0;
}
@@ -847,6 +854,8 @@
(msg->pages || msg->pagelist || msg->bio || in_trail))
kunmap(page);
+ if (ret == -EAGAIN)
+ ret = 0;
if (ret <= 0)
goto out;
@@ -1238,8 +1247,6 @@
con->auth_retry);
if (con->auth_retry == 2) {
con->error_msg = "connect authorization failure";
- reset_connection(con);
- set_bit(CLOSED, &con->state);
return -1;
}
con->auth_retry = 1;
@@ -1705,14 +1712,6 @@
/* open the socket first? */
if (con->sock == NULL) {
- /*
- * if we were STANDBY and are reconnecting _this_
- * connection, bump connect_seq now. Always bump
- * global_seq.
- */
- if (test_and_clear_bit(STANDBY, &con->state))
- con->connect_seq++;
-
prepare_write_banner(msgr, con);
prepare_write_connect(msgr, con, 1);
prepare_read_banner(con);
@@ -1737,16 +1736,12 @@
if (con->out_skip) {
ret = write_partial_skip(con);
if (ret <= 0)
- goto done;
- if (ret < 0) {
- dout("try_write write_partial_skip err %d\n", ret);
- goto done;
- }
+ goto out;
}
if (con->out_kvec_left) {
ret = write_partial_kvec(con);
if (ret <= 0)
- goto done;
+ goto out;
}
/* msg pages? */
@@ -1761,11 +1756,11 @@
if (ret == 1)
goto more_kvec; /* we need to send the footer, too! */
if (ret == 0)
- goto done;
+ goto out;
if (ret < 0) {
dout("try_write write_partial_msg_pages err %d\n",
ret);
- goto done;
+ goto out;
}
}
@@ -1789,10 +1784,9 @@
/* Nothing to do! */
clear_bit(WRITE_PENDING, &con->state);
dout("try_write nothing else to write.\n");
-done:
ret = 0;
out:
- dout("try_write done on %p\n", con);
+ dout("try_write done on %p ret %d\n", con, ret);
return ret;
}
@@ -1821,19 +1815,17 @@
dout("try_read connecting\n");
ret = read_partial_banner(con);
if (ret <= 0)
- goto done;
- if (process_banner(con) < 0) {
- ret = -1;
goto out;
- }
+ ret = process_banner(con);
+ if (ret < 0)
+ goto out;
}
ret = read_partial_connect(con);
if (ret <= 0)
- goto done;
- if (process_connect(con) < 0) {
- ret = -1;
goto out;
- }
+ ret = process_connect(con);
+ if (ret < 0)
+ goto out;
goto more;
}
@@ -1848,7 +1840,7 @@
dout("skipping %d / %d bytes\n", skip, -con->in_base_pos);
ret = ceph_tcp_recvmsg(con->sock, buf, skip);
if (ret <= 0)
- goto done;
+ goto out;
con->in_base_pos += ret;
if (con->in_base_pos)
goto more;
@@ -1859,7 +1851,7 @@
*/
ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1);
if (ret <= 0)
- goto done;
+ goto out;
dout("try_read got tag %d\n", (int)con->in_tag);
switch (con->in_tag) {
case CEPH_MSGR_TAG_MSG:
@@ -1870,7 +1862,7 @@
break;
case CEPH_MSGR_TAG_CLOSE:
set_bit(CLOSED, &con->state); /* fixme */
- goto done;
+ goto out;
default:
goto bad_tag;
}
@@ -1882,13 +1874,12 @@
case -EBADMSG:
con->error_msg = "bad crc";
ret = -EIO;
- goto out;
+ break;
case -EIO:
con->error_msg = "io error";
- goto out;
- default:
- goto done;
+ break;
}
+ goto out;
}
if (con->in_tag == CEPH_MSGR_TAG_READY)
goto more;
@@ -1898,15 +1889,13 @@
if (con->in_tag == CEPH_MSGR_TAG_ACK) {
ret = read_partial_ack(con);
if (ret <= 0)
- goto done;
+ goto out;
process_ack(con);
goto more;
}
-done:
- ret = 0;
out:
- dout("try_read done on %p\n", con);
+ dout("try_read done on %p ret %d\n", con, ret);
return ret;
bad_tag:
@@ -1951,7 +1940,24 @@
work.work);
mutex_lock(&con->mutex);
+ if (test_and_clear_bit(BACKOFF, &con->state)) {
+ dout("con_work %p backing off\n", con);
+ if (queue_delayed_work(ceph_msgr_wq, &con->work,
+ round_jiffies_relative(con->delay))) {
+ dout("con_work %p backoff %lu\n", con, con->delay);
+ mutex_unlock(&con->mutex);
+ return;
+ } else {
+ con->ops->put(con);
+ dout("con_work %p FAILED to back off %lu\n", con,
+ con->delay);
+ }
+ }
+ if (test_bit(STANDBY, &con->state)) {
+ dout("con_work %p STANDBY\n", con);
+ goto done;
+ }
if (test_bit(CLOSED, &con->state)) { /* e.g. if we are replaced */
dout("con_work CLOSED\n");
con_close_socket(con);
@@ -2008,10 +2014,12 @@
/* Requeue anything that hasn't been acked */
list_splice_init(&con->out_sent, &con->out_queue);
- /* If there are no messages in the queue, place the connection
- * in a STANDBY state (i.e., don't try to reconnect just yet). */
- if (list_empty(&con->out_queue) && !con->out_keepalive_pending) {
- dout("fault setting STANDBY\n");
+ /* If there are no messages queued or keepalive pending, place
+ * the connection in a STANDBY state */
+ if (list_empty(&con->out_queue) &&
+ !test_bit(KEEPALIVE_PENDING, &con->state)) {
+ dout("fault %p setting STANDBY clearing WRITE_PENDING\n", con);
+ clear_bit(WRITE_PENDING, &con->state);
set_bit(STANDBY, &con->state);
} else {
/* retry after a delay. */
@@ -2019,11 +2027,24 @@
con->delay = BASE_DELAY_INTERVAL;
else if (con->delay < MAX_DELAY_INTERVAL)
con->delay *= 2;
- dout("fault queueing %p delay %lu\n", con, con->delay);
con->ops->get(con);
if (queue_delayed_work(ceph_msgr_wq, &con->work,
- round_jiffies_relative(con->delay)) == 0)
+ round_jiffies_relative(con->delay))) {
+ dout("fault queued %p delay %lu\n", con, con->delay);
+ } else {
con->ops->put(con);
+ dout("fault failed to queue %p delay %lu, backoff\n",
+ con, con->delay);
+ /*
+ * In many cases we see a socket state change
+ * while con_work is running and end up
+ * queuing (non-delayed) work, such that we
+ * can't backoff with a delay. Set a flag so
+ * that when con_work restarts we schedule the
+ * delay then.
+ */
+ set_bit(BACKOFF, &con->state);
+ }
}
out_unlock:
@@ -2094,6 +2115,19 @@
}
EXPORT_SYMBOL(ceph_messenger_destroy);
+static void clear_standby(struct ceph_connection *con)
+{
+ /* come back from STANDBY? */
+ if (test_and_clear_bit(STANDBY, &con->state)) {
+ mutex_lock(&con->mutex);
+ dout("clear_standby %p and ++connect_seq\n", con);
+ con->connect_seq++;
+ WARN_ON(test_bit(WRITE_PENDING, &con->state));
+ WARN_ON(test_bit(KEEPALIVE_PENDING, &con->state));
+ mutex_unlock(&con->mutex);
+ }
+}
+
/*
* Queue up an outgoing message on the given connection.
*/
@@ -2126,6 +2160,7 @@
/* if there wasn't anything waiting to send before, queue
* new work */
+ clear_standby(con);
if (test_and_set_bit(WRITE_PENDING, &con->state) == 0)
queue_con(con);
}
@@ -2191,6 +2226,8 @@
*/
void ceph_con_keepalive(struct ceph_connection *con)
{
+ dout("con_keepalive %p\n", con);
+ clear_standby(con);
if (test_and_set_bit(KEEPALIVE_PENDING, &con->state) == 0 &&
test_and_set_bit(WRITE_PENDING, &con->state) == 0)
queue_con(con);
diff --git a/net/ceph/pagevec.c b/net/ceph/pagevec.c
index 1a040e6..cd9c21d 100644
--- a/net/ceph/pagevec.c
+++ b/net/ceph/pagevec.c
@@ -16,22 +16,30 @@
int num_pages, bool write_page)
{
struct page **pages;
- int rc;
+ int got = 0;
+ int rc = 0;
pages = kmalloc(sizeof(*pages) * num_pages, GFP_NOFS);
if (!pages)
return ERR_PTR(-ENOMEM);
down_read(¤t->mm->mmap_sem);
- rc = get_user_pages(current, current->mm, (unsigned long)data,
- num_pages, write_page, 0, pages, NULL);
+ while (got < num_pages) {
+ rc = get_user_pages(current, current->mm,
+ (unsigned long)data + ((unsigned long)got * PAGE_SIZE),
+ num_pages - got, write_page, 0, pages + got, NULL);
+ if (rc < 0)
+ break;
+ BUG_ON(rc == 0);
+ got += rc;
+ }
up_read(¤t->mm->mmap_sem);
- if (rc < num_pages)
+ if (rc < 0)
goto fail;
return pages;
fail:
- ceph_put_page_vector(pages, rc > 0 ? rc : 0, false);
+ ceph_put_page_vector(pages, got, false);
return ERR_PTR(rc);
}
EXPORT_SYMBOL(ceph_get_direct_page_vector);
diff --git a/net/core/dev.c b/net/core/dev.c
index 8e726cb..8ae6631 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1280,10 +1280,13 @@
static int __dev_close(struct net_device *dev)
{
+ int retval;
LIST_HEAD(single);
list_add(&dev->unreg_list, &single);
- return __dev_close_many(&single);
+ retval = __dev_close_many(&single);
+ list_del(&single);
+ return retval;
}
int dev_close_many(struct list_head *head)
@@ -1325,7 +1328,7 @@
list_add(&dev->unreg_list, &single);
dev_close_many(&single);
-
+ list_del(&single);
return 0;
}
EXPORT_SYMBOL(dev_close);
@@ -5063,6 +5066,7 @@
list_add(&dev->unreg_list, &single);
rollback_registered_many(&single);
+ list_del(&single);
}
unsigned long netdev_fix_features(unsigned long features, const char *name)
@@ -6216,6 +6220,7 @@
}
}
unregister_netdevice_many(&dev_kill_list);
+ list_del(&dev_kill_list);
rtnl_unlock();
}
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 508f9c1..133fd22 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -144,7 +144,7 @@
list_for_each_entry(ha, &from_list->list, list) {
type = addr_type ? addr_type : ha->type;
- __hw_addr_del(to_list, ha->addr, addr_len, addr_type);
+ __hw_addr_del(to_list, ha->addr, addr_len, type);
}
}
EXPORT_SYMBOL(__hw_addr_del_multiple);
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 6b03f56..c44348a 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -626,6 +626,9 @@
dcb->cmd = DCB_CMD_GAPP;
app_nest = nla_nest_start(dcbnl_skb, DCB_ATTR_APP);
+ if (!app_nest)
+ goto out_cancel;
+
ret = nla_put_u8(dcbnl_skb, DCB_APP_ATTR_IDTYPE, idtype);
if (ret)
goto out_cancel;
@@ -1190,7 +1193,7 @@
goto err;
}
- if (ieee[DCB_ATTR_IEEE_PFC] && ops->ieee_setets) {
+ if (ieee[DCB_ATTR_IEEE_PFC] && ops->ieee_setpfc) {
struct ieee_pfc *pfc = nla_data(ieee[DCB_ATTR_IEEE_PFC]);
err = ops->ieee_setpfc(netdev, pfc);
if (err)
@@ -1613,6 +1616,10 @@
u8 dcb_setapp(struct net_device *dev, struct dcb_app *new)
{
struct dcb_app_type *itr;
+ struct dcb_app_type event;
+
+ memcpy(&event.name, dev->name, sizeof(event.name));
+ memcpy(&event.app, new, sizeof(event.app));
spin_lock(&dcb_lock);
/* Search for existing match and replace */
@@ -1644,7 +1651,7 @@
}
out:
spin_unlock(&dcb_lock);
- call_dcbevent_notifiers(DCB_APP_EVENT, new);
+ call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return 0;
}
EXPORT_SYMBOL(dcb_setapp);
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 8cde009..4222e7a 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -614,6 +614,9 @@
/* Caller (dccp_v4_do_rcv) will send Reset */
dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION;
return 1;
+ } else if (sk->sk_state == DCCP_CLOSED) {
+ dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION;
+ return 1;
}
if (sk->sk_state != DCCP_REQUESTING && sk->sk_state != DCCP_RESPOND) {
@@ -668,10 +671,6 @@
}
switch (sk->sk_state) {
- case DCCP_CLOSED:
- dcb->dccpd_reset_code = DCCP_RESET_CODE_NO_CONNECTION;
- return 1;
-
case DCCP_REQUESTING:
queued = dccp_rcv_request_sent_state_process(sk, skb, dh, len);
if (queued >= 0)
diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c
index 739435a..cfa7a5e 100644
--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -67,8 +67,9 @@
size_t result_len = 0;
const char *data = _data, *end, *opt;
- kenter("%%%d,%s,'%s',%zu",
- key->serial, key->description, data, datalen);
+ kenter("%%%d,%s,'%*.*s',%zu",
+ key->serial, key->description,
+ (int)datalen, (int)datalen, data, datalen);
if (datalen <= 1 || !data || data[datalen - 1] != '\0')
return -EINVAL;
@@ -217,6 +218,19 @@
seq_printf(m, ": %u", key->datalen);
}
+/*
+ * read the DNS data
+ * - the key's semaphore is read-locked
+ */
+static long dns_resolver_read(const struct key *key,
+ char __user *buffer, size_t buflen)
+{
+ if (key->type_data.x[0])
+ return key->type_data.x[0];
+
+ return user_read(key, buffer, buflen);
+}
+
struct key_type key_type_dns_resolver = {
.name = "dns_resolver",
.instantiate = dns_resolver_instantiate,
@@ -224,7 +238,7 @@
.revoke = user_revoke,
.destroy = user_destroy,
.describe = dns_resolver_describe,
- .read = user_read,
+ .read = dns_resolver_read,
};
static int __init init_dns_resolver(void)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 748cb5b..df4616f 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1030,6 +1030,21 @@
return mtu >= 68;
}
+static void inetdev_send_gratuitous_arp(struct net_device *dev,
+ struct in_device *in_dev)
+
+{
+ struct in_ifaddr *ifa = in_dev->ifa_list;
+
+ if (!ifa)
+ return;
+
+ arp_send(ARPOP_REQUEST, ETH_P_ARP,
+ ifa->ifa_address, dev,
+ ifa->ifa_address, NULL,
+ dev->dev_addr, NULL);
+}
+
/* Called only under RTNL semaphore */
static int inetdev_event(struct notifier_block *this, unsigned long event,
@@ -1082,18 +1097,13 @@
}
ip_mc_up(in_dev);
/* fall through */
- case NETDEV_NOTIFY_PEERS:
case NETDEV_CHANGEADDR:
+ if (!IN_DEV_ARP_NOTIFY(in_dev))
+ break;
+ /* fall through */
+ case NETDEV_NOTIFY_PEERS:
/* Send gratuitous ARP to notify of link change */
- if (IN_DEV_ARP_NOTIFY(in_dev)) {
- struct in_ifaddr *ifa = in_dev->ifa_list;
-
- if (ifa)
- arp_send(ARPOP_REQUEST, ETH_P_ARP,
- ifa->ifa_address, dev,
- ifa->ifa_address, NULL,
- dev->dev_addr, NULL);
- }
+ inetdev_send_gratuitous_arp(dev, in_dev);
break;
case NETDEV_DOWN:
ip_mc_down(in_dev);
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index c5af909..3c8dfa1 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -505,7 +505,9 @@
}
rcu_read_unlock();
+ local_bh_disable();
inet_twsk_deschedule(tw, twdr);
+ local_bh_enable();
inet_twsk_put(tw);
goto restart_rcu;
}
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index eb68a0e..6613edf 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -775,6 +775,7 @@
.fl4_dst = dst,
.fl4_src = tiph->saddr,
.fl4_tos = RT_TOS(tos),
+ .proto = IPPROTO_GRE,
.fl_gre_key = tunnel->parms.o_key
};
if (ip_route_output_key(dev_net(dev), &rt, &fl)) {
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 788a3e7..6ed6603 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2722,6 +2722,7 @@
.destroy = ipv4_dst_destroy,
.check = ipv4_blackhole_dst_check,
.default_mtu = ipv4_blackhole_default_mtu,
+ .default_advmss = ipv4_default_advmss,
.update_pmtu = ipv4_rt_blackhole_update_pmtu,
};
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index eb7f82e..65f6c04 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1222,7 +1222,7 @@
}
/* D-SACK for already forgotten data... Do dumb counting. */
- if (dup_sack &&
+ if (dup_sack && tp->undo_marker && tp->undo_retrans &&
!after(end_seq_0, prior_snd_una) &&
after(end_seq_0, tp->undo_marker))
tp->undo_retrans--;
@@ -1299,7 +1299,8 @@
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
- if (after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
+ if (tp->undo_marker && tp->undo_retrans &&
+ after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 406f320..dfa5beb 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2162,7 +2162,7 @@
if (!tp->retrans_stamp)
tp->retrans_stamp = TCP_SKB_CB(skb)->when;
- tp->undo_retrans++;
+ tp->undo_retrans += tcp_skb_pcount(skb);
/* snd_nxt is stored to detect loss of retransmitted segment,
* see tcp_input.c tcp_sacktag_write_queue().
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index 09c8889..de33803 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -410,7 +410,7 @@
if (p != NULL) {
sb_add(m, "%02x", *p++);
for (i = 1; i < len; i++)
- sb_add(m, ":%02x", p[i]);
+ sb_add(m, ":%02x", *p++);
}
sb_add(m, " ");
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 1c29f95..904312e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -128,6 +128,7 @@
.destroy = ip6_dst_destroy,
.check = ip6_dst_check,
.default_mtu = ip6_blackhole_default_mtu,
+ .default_advmss = ip6_default_advmss,
.update_pmtu = ip6_rt_blackhole_update_pmtu,
};
@@ -2556,14 +2557,16 @@
int ipv6_sysctl_rtcache_flush(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- struct net *net = current->nsproxy->net_ns;
- int delay = net->ipv6.sysctl.flush_delay;
- if (write) {
- proc_dointvec(ctl, write, buffer, lenp, ppos);
- fib6_run_gc(delay <= 0 ? ~0UL : (unsigned long)delay, net);
- return 0;
- } else
+ struct net *net;
+ int delay;
+ if (!write)
return -EINVAL;
+
+ net = (struct net *)ctl->extra1;
+ delay = net->ipv6.sysctl.flush_delay;
+ proc_dointvec(ctl, write, buffer, lenp, ppos);
+ fib6_run_gc(delay <= 0 ? ~0UL : (unsigned long)delay, net);
+ return 0;
}
ctl_table ipv6_route_table_template[] = {
@@ -2650,6 +2653,7 @@
if (table) {
table[0].data = &net->ipv6.sysctl.flush_delay;
+ table[0].extra1 = net;
table[1].data = &net->ipv6.ip6_dst_ops.gc_thresh;
table[2].data = &net->ipv6.sysctl.ip6_rt_max_size;
table[3].data = &net->ipv6.sysctl.ip6_rt_gc_min_interval;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 8acba45..7a10a8d 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1229,6 +1229,7 @@
}
mutex_unlock(&local->iflist_mtx);
unregister_netdevice_many(&unreg_list);
+ list_del(&unreg_list);
}
static u32 ieee80211_idle_off(struct ieee80211_local *local,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 45fbb9e..c9ceb4d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1033,6 +1033,12 @@
if (is_multicast_ether_addr(hdr->addr1))
return;
+ /*
+ * In case we receive frames after disassociation.
+ */
+ if (!sdata->u.mgd.associated)
+ return;
+
ieee80211_sta_reset_conn_monitor(sdata);
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index cf68700..d036597 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1210,7 +1210,9 @@
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
changed |= BSS_CHANGED_ASSOC;
+ mutex_lock(&sdata->u.mgd.mtx);
ieee80211_bss_info_change_notify(sdata, changed);
+ mutex_unlock(&sdata->u.mgd.mtx);
break;
case NL80211_IFTYPE_ADHOC:
changed |= BSS_CHANGED_IBSS;
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 32fcbe2..4aa614b 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -133,6 +133,7 @@
/* Optimization: we don't need to hold module
reference here, since function can't sleep. --RR */
+repeat:
verdict = elem->hook(hook, skb, indev, outdev, okfn);
if (verdict != NF_ACCEPT) {
#ifdef CONFIG_NETFILTER_DEBUG
@@ -145,7 +146,7 @@
#endif
if (verdict != NF_REPEAT)
return verdict;
- *i = (*i)->prev;
+ goto repeat;
}
}
return NF_ACCEPT;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 22f7ad5..ba98e13 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -808,9 +808,9 @@
dest->u_threshold = udest->u_threshold;
dest->l_threshold = udest->l_threshold;
- spin_lock(&dest->dst_lock);
+ spin_lock_bh(&dest->dst_lock);
ip_vs_dst_reset(dest);
- spin_unlock(&dest->dst_lock);
+ spin_unlock_bh(&dest->dst_lock);
if (add)
ip_vs_new_estimator(&dest->stats);
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index b07393e..9181699 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -85,6 +85,8 @@
int nf_log_bind_pf(u_int8_t pf, const struct nf_logger *logger)
{
+ if (pf >= ARRAY_SIZE(nf_loggers))
+ return -EINVAL;
mutex_lock(&nf_log_mutex);
if (__find_logger(pf, logger->name) == NULL) {
mutex_unlock(&nf_log_mutex);
@@ -98,6 +100,8 @@
void nf_log_unbind_pf(u_int8_t pf)
{
+ if (pf >= ARRAY_SIZE(nf_loggers))
+ return;
mutex_lock(&nf_log_mutex);
rcu_assign_pointer(nf_loggers[pf], NULL);
mutex_unlock(&nf_log_mutex);
diff --git a/net/netfilter/nf_tproxy_core.c b/net/netfilter/nf_tproxy_core.c
index 4d87bef..474d621 100644
--- a/net/netfilter/nf_tproxy_core.c
+++ b/net/netfilter/nf_tproxy_core.c
@@ -28,26 +28,23 @@
skb->destructor = NULL;
if (sk)
- nf_tproxy_put_sock(sk);
+ sock_put(sk);
}
/* consumes sk */
-int
+void
nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk)
{
- bool transparent = (sk->sk_state == TCP_TIME_WAIT) ?
- inet_twsk(sk)->tw_transparent :
- inet_sk(sk)->transparent;
+ /* assigning tw sockets complicates things; most
+ * skb->sk->X checks would have to test sk->sk_state first */
+ if (sk->sk_state == TCP_TIME_WAIT) {
+ inet_twsk_put(inet_twsk(sk));
+ return;
+ }
- if (transparent) {
- skb_orphan(skb);
- skb->sk = sk;
- skb->destructor = nf_tproxy_destructor;
- return 1;
- } else
- nf_tproxy_put_sock(sk);
-
- return 0;
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = nf_tproxy_destructor;
}
EXPORT_SYMBOL_GPL(nf_tproxy_assign_sock);
diff --git a/net/netfilter/xt_TPROXY.c b/net/netfilter/xt_TPROXY.c
index 640678f..dcfd57e 100644
--- a/net/netfilter/xt_TPROXY.c
+++ b/net/netfilter/xt_TPROXY.c
@@ -33,6 +33,20 @@
#include <net/netfilter/nf_tproxy_core.h>
#include <linux/netfilter/xt_TPROXY.h>
+static bool tproxy_sk_is_transparent(struct sock *sk)
+{
+ if (sk->sk_state != TCP_TIME_WAIT) {
+ if (inet_sk(sk)->transparent)
+ return true;
+ sock_put(sk);
+ } else {
+ if (inet_twsk(sk)->tw_transparent)
+ return true;
+ inet_twsk_put(inet_twsk(sk));
+ }
+ return false;
+}
+
static inline __be32
tproxy_laddr4(struct sk_buff *skb, __be32 user_laddr, __be32 daddr)
{
@@ -141,7 +155,7 @@
skb->dev, NFT_LOOKUP_LISTENER);
/* NOTE: assign_sock consumes our sk reference */
- if (sk && nf_tproxy_assign_sock(skb, sk)) {
+ if (sk && tproxy_sk_is_transparent(sk)) {
/* This should be in a separate target, but we don't do multiple
targets on the same rule yet */
skb->mark = (skb->mark & ~mark_mask) ^ mark_value;
@@ -149,6 +163,8 @@
pr_debug("redirecting: proto %hhu %pI4:%hu -> %pI4:%hu, mark: %x\n",
iph->protocol, &iph->daddr, ntohs(hp->dest),
&laddr, ntohs(lport), skb->mark);
+
+ nf_tproxy_assign_sock(skb, sk);
return NF_ACCEPT;
}
@@ -306,7 +322,7 @@
par->in, NFT_LOOKUP_LISTENER);
/* NOTE: assign_sock consumes our sk reference */
- if (sk && nf_tproxy_assign_sock(skb, sk)) {
+ if (sk && tproxy_sk_is_transparent(sk)) {
/* This should be in a separate target, but we don't do multiple
targets on the same rule yet */
skb->mark = (skb->mark & ~tgi->mark_mask) ^ tgi->mark_value;
@@ -314,6 +330,8 @@
pr_debug("redirecting: proto %hhu %pI6:%hu -> %pI6:%hu, mark: %x\n",
tproto, &iph->saddr, ntohs(hp->source),
laddr, ntohs(lport), skb->mark);
+
+ nf_tproxy_assign_sock(skb, sk);
return NF_ACCEPT;
}
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 00d6ae83..9cc4635 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -35,6 +35,15 @@
#include <net/netfilter/nf_conntrack.h>
#endif
+static void
+xt_socket_put_sk(struct sock *sk)
+{
+ if (sk->sk_state == TCP_TIME_WAIT)
+ inet_twsk_put(inet_twsk(sk));
+ else
+ sock_put(sk);
+}
+
static int
extract_icmp4_fields(const struct sk_buff *skb,
u8 *protocol,
@@ -164,7 +173,7 @@
(sk->sk_state == TCP_TIME_WAIT &&
inet_twsk(sk)->tw_transparent));
- nf_tproxy_put_sock(sk);
+ xt_socket_put_sk(sk);
if (wildcard || !transparent)
sk = NULL;
@@ -298,7 +307,7 @@
(sk->sk_state == TCP_TIME_WAIT &&
inet_twsk(sk)->tw_transparent));
- nf_tproxy_put_sock(sk);
+ xt_socket_put_sk(sk);
if (wildcard || !transparent)
sk = NULL;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 478181d..1f92459 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1407,7 +1407,7 @@
int noblock = flags&MSG_DONTWAIT;
size_t copied;
struct sk_buff *skb, *data_skb;
- int err;
+ int err, ret;
if (flags&MSG_OOB)
return -EOPNOTSUPP;
@@ -1470,8 +1470,13 @@
skb_free_datagram(sk, skb);
- if (nlk->cb && atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2)
- netlink_dump(sk);
+ if (nlk->cb && atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2) {
+ ret = netlink_dump(sk);
+ if (ret) {
+ sk->sk_err = ret;
+ sk->sk_error_report(sk);
+ }
+ }
scm_recv(sock, msg, siocb->scm, flags);
out:
@@ -1736,6 +1741,7 @@
struct netlink_callback *cb;
struct sock *sk;
struct netlink_sock *nlk;
+ int ret;
cb = kzalloc(sizeof(*cb), GFP_KERNEL);
if (cb == NULL)
@@ -1764,9 +1770,13 @@
nlk->cb = cb;
mutex_unlock(nlk->cb_mutex);
- netlink_dump(sk);
+ ret = netlink_dump(sk);
+
sock_put(sk);
+ if (ret)
+ return ret;
+
/* We successfully started a dump, by returning -EINTR we
* signal not to send ACK even if it was requested.
*/
diff --git a/net/rxrpc/ar-input.c b/net/rxrpc/ar-input.c
index 8931500..1a2b0633 100644
--- a/net/rxrpc/ar-input.c
+++ b/net/rxrpc/ar-input.c
@@ -423,6 +423,7 @@
goto protocol_error;
}
+ case RXRPC_PACKET_TYPE_ACKALL:
case RXRPC_PACKET_TYPE_ACK:
/* ACK processing is done in process context */
read_lock_bh(&call->state_lock);
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index 5ee16f0..d763793 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -89,11 +89,11 @@
return ret;
plen -= sizeof(*token);
- token = kmalloc(sizeof(*token), GFP_KERNEL);
+ token = kzalloc(sizeof(*token), GFP_KERNEL);
if (!token)
return -ENOMEM;
- token->kad = kmalloc(plen, GFP_KERNEL);
+ token->kad = kzalloc(plen, GFP_KERNEL);
if (!token->kad) {
kfree(token);
return -ENOMEM;
@@ -731,10 +731,10 @@
goto error;
ret = -ENOMEM;
- token = kmalloc(sizeof(*token), GFP_KERNEL);
+ token = kzalloc(sizeof(*token), GFP_KERNEL);
if (!token)
goto error;
- token->kad = kmalloc(plen, GFP_KERNEL);
+ token->kad = kzalloc(plen, GFP_KERNEL);
if (!token->kad)
goto error_free;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 34dc598..1bc6980 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -839,6 +839,7 @@
list_add(&dev->unreg_list, &single);
dev_deactivate_many(&single);
+ list_del(&single);
}
static void dev_init_scheduler_queue(struct net_device *dev,
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 2cc46f0..b23428f 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2029,11 +2029,11 @@
*errp = sctp_make_op_error_fixed(asoc, chunk);
if (*errp) {
- sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
- WORD_ROUND(ntohs(param.p->length)));
- sctp_addto_chunk_fixed(*errp,
- WORD_ROUND(ntohs(param.p->length)),
- param.v);
+ if (!sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
+ WORD_ROUND(ntohs(param.p->length))))
+ sctp_addto_chunk_fixed(*errp,
+ WORD_ROUND(ntohs(param.p->length)),
+ param.v);
} else {
/* If there is no memory for generating the ERROR
* report as specified, an ABORT will be triggered
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 3e5dbd4..d112f03 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -802,11 +802,11 @@
return freq;
if (freq == 0)
return -EINVAL;
- wdev_lock(wdev);
mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
- mutex_unlock(&rdev->devlist_mtx);
wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
return err;
default:
return -EOPNOTSUPP;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 8b3ef40..6459588 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1340,10 +1340,13 @@
default:
BUG();
}
- xdst = dst_alloc(dst_ops) ?: ERR_PTR(-ENOBUFS);
+ xdst = dst_alloc(dst_ops);
xfrm_policy_put_afinfo(afinfo);
- xdst->flo.ops = &xfrm_bundle_fc_ops;
+ if (likely(xdst))
+ xdst->flo.ops = &xfrm_bundle_fc_ops;
+ else
+ xdst = ERR_PTR(-ENOBUFS);
return xdst;
}
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index c9a16ab..6c94c6c 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -315,6 +315,7 @@
char *end = m + len;
char *p;
char s[PATH_MAX];
+ int first;
p = strchr(m, ':');
if (!p) {
@@ -327,6 +328,7 @@
clear_config();
+ first = 1;
while (m < end) {
while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
m++;
@@ -340,9 +342,17 @@
if (strrcmp(s, "include/generated/autoconf.h") &&
strrcmp(s, "arch/um/include/uml-config.h") &&
strrcmp(s, ".ver")) {
- printf(" %s \\\n", s);
+ /*
+ * Do not output the first dependency (the
+ * source file), so that kbuild is not confused
+ * if a .c file is rewritten into .S or vice
+ * versa.
+ */
+ if (!first)
+ printf(" %s \\\n", s);
do_config_file(s);
}
+ first = 0;
m = p + 1;
}
printf("\n%s: $(deps_%s)\n\n", target, target);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 4902ae5..53b53e9 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -141,6 +141,7 @@
fail_input:
input_free_device(jack->input_dev);
+ kfree(jack->id);
kfree(jack);
return err;
}
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f3..16c0bdf 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@
static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
{
stream_t *dma = &vortex->dma_adb[adbdma];
- int temp;
+ int temp, page, delta;
temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
- temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
- return temp;
+ page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+ if (dma->nr_periods >= 4)
+ delta = (page - dma->period_real) & 3;
+ else {
+ delta = (page - dma->period_real);
+ if (delta < 0)
+ delta += dma->nr_periods;
+ }
+ return (dma->period_virt + delta) * dma->period_bytes
+ + (temp & (dma->period_bytes - 1));
}
static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcd..fcedad9 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index a07b031..067982f 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -1039,9 +1039,11 @@
{0x11, AC_VERB_SET_PROC_COEF, 0x0008},
{0x11, AC_VERB_SET_PROC_STATE, 0x00},
+#if 0 /* Don't to set to D3 as we are in power-up sequence */
{0x07, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Rx: D3 */
{0x08, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Tx: D3 */
/*{0x01, AC_VERB_SET_POWER_STATE, 0x03},*/ /* AFG: D3 This is already handled */
+#endif
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d3..4d5004e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3114,6 +3114,8 @@
SND_PCI_QUIRK(0x1028, 0x0401, "Dell Vostro 1014", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x1028, 0x050f, "Dell Inspiron", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x1028, 0x0510, "Dell Vostro", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_ASUS),
SND_PCI_QUIRK(0x1043, 0x1643, "Asus K52JU", CXT5066_ASUS),
@@ -3410,7 +3412,7 @@
}
}
spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.max_channels = nums * 2;
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (cfg->hp_outs > 0)
spec->auto_mute = 1;
@@ -3729,9 +3731,9 @@
return 0;
}
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
const char *dir, int cidx,
- hda_nid_t nid, int hda_dir)
+ hda_nid_t nid, int hda_dir, int amp_idx)
{
static char name[32];
static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3745,8 @@
for (i = 0; i < 2; i++) {
struct snd_kcontrol *kctl;
- knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+ knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+ hda_dir);
knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
knew[i].index = cidx;
snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3762,9 @@
return 0;
}
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir) \
+ cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
#define cx_auto_add_pb_volume(codec, nid, str, idx) \
cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
@@ -3808,29 +3814,60 @@
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
static const char *prev_label;
- int i, err, cidx;
+ int i, err, cidx, conn_len;
+ hda_nid_t conn[HDA_MAX_CONNECTIONS];
- err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
- HDA_INPUT);
- if (err < 0)
- return err;
+ int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+ int adc_nid = spec->adc_nids[0];
+
+ conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+ HDA_MAX_CONNECTIONS);
+ if (conn_len < 0)
+ return conn_len;
+
+ multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+ if (!multi_adc_volume) {
+ err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+ HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
+
prev_label = NULL;
cidx = 0;
for (i = 0; i < cfg->num_inputs; i++) {
hda_nid_t nid = cfg->inputs[i].pin;
const char *label;
- if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+ int j;
+ int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+ if (!pin_amp && !multi_adc_volume)
continue;
+
label = hda_get_autocfg_input_label(codec, cfg, i);
if (label == prev_label)
cidx++;
else
cidx = 0;
prev_label = label;
- err = cx_auto_add_volume(codec, label, " Capture", cidx,
- nid, HDA_INPUT);
- if (err < 0)
- return err;
+
+ if (pin_amp) {
+ err = cx_auto_add_volume(codec, label, " Boost", cidx,
+ nid, HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
+
+ if (!multi_adc_volume)
+ continue;
+ for (j = 0; j < conn_len; j++) {
+ if (conn[j] == nid) {
+ err = cx_auto_add_volume_idx(codec, label,
+ " Capture", cidx, adc_nid, HDA_INPUT, j);
+ if (err < 0)
+ return err;
+ break;
+ }
+ }
}
return 0;
}
@@ -3902,6 +3939,8 @@
.patch = patch_cxt5066 },
{ .id = 0x14f15069, .name = "CX20585",
.patch = patch_cxt5066 },
+ { .id = 0x14f1506e, .name = "CX20590",
+ .patch = patch_cxt5066 },
{ .id = 0x14f15097, .name = "CX20631",
.patch = patch_conexant_auto },
{ .id = 0x14f15098, .name = "CX20632",
@@ -3928,6 +3967,7 @@
MODULE_ALIAS("snd-hda-codec-id:14f15067");
MODULE_ALIAS("snd-hda-codec-id:14f15068");
MODULE_ALIAS("snd-hda-codec-id:14f15069");
+MODULE_ALIAS("snd-hda-codec-id:14f1506e");
MODULE_ALIAS("snd-hda-codec-id:14f15097");
MODULE_ALIAS("snd-hda-codec-id:14f15098");
MODULE_ALIAS("snd-hda-codec-id:14f150a1");
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index a587677..ec0fa2d 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1634,6 +1634,9 @@
{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+/* 17 is known to be absent */
{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
@@ -1676,6 +1679,8 @@
MODULE_ALIAS("snd-hda-codec-id:10de0012");
MODULE_ALIAS("snd-hda-codec-id:10de0013");
MODULE_ALIAS("snd-hda-codec-id:10de0014");
+MODULE_ALIAS("snd-hda-codec-id:10de0015");
+MODULE_ALIAS("snd-hda-codec-id:10de0016");
MODULE_ALIAS("snd-hda-codec-id:10de0018");
MODULE_ALIAS("snd-hda-codec-id:10de0019");
MODULE_ALIAS("snd-hda-codec-id:10de001a");
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3328a25..4261bb8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1133,11 +1133,8 @@
nid = spec->autocfg.hp_pins[i];
if (!nid)
break;
- if (snd_hda_jack_detect(codec, nid)) {
- spec->jack_present = 1;
- break;
- }
- alc_report_jack(codec, spec->autocfg.hp_pins[i]);
+ alc_report_jack(codec, nid);
+ spec->jack_present |= snd_hda_jack_detect(codec, nid);
}
mute = spec->jack_present ? HDA_AMP_MUTE : 0;
@@ -15015,7 +15012,7 @@
SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82JV", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_AMIC),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 9ea48b4..bd7b123 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -586,7 +586,12 @@
0x0f, 0x10, 0x11, 0x1f, 0x20,
};
-static hda_nid_t stac92hd88xxx_pin_nids[10] = {
+static hda_nid_t stac92hd87xxx_pin_nids[6] = {
+ 0x0a, 0x0b, 0x0c, 0x0d,
+ 0x0f, 0x11,
+};
+
+static hda_nid_t stac92hd88xxx_pin_nids[8] = {
0x0a, 0x0b, 0x0c, 0x0d,
0x0f, 0x11, 0x1f, 0x20,
};
@@ -5430,12 +5435,13 @@
switch (codec->vendor_id) {
case 0x111d76d1:
case 0x111d76d9:
+ case 0x111d76e5:
spec->dmic_nids = stac92hd87b_dmic_nids;
spec->num_dmics = stac92xx_connected_ports(codec,
stac92hd87b_dmic_nids,
STAC92HD87B_NUM_DMICS);
- spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
- spec->pin_nids = stac92hd88xxx_pin_nids;
+ spec->num_pins = ARRAY_SIZE(stac92hd87xxx_pin_nids);
+ spec->pin_nids = stac92hd87xxx_pin_nids;
spec->mono_nid = 0;
spec->num_pwrs = 0;
break;
@@ -5443,6 +5449,7 @@
case 0x111d7667:
case 0x111d7668:
case 0x111d7669:
+ case 0x111d76e3:
spec->num_dmics = stac92xx_connected_ports(codec,
stac92hd88xxx_dmic_nids,
STAC92HD88XXX_NUM_DMICS);
@@ -6387,6 +6394,8 @@
{ .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx },
{ .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx },
{ .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e7, .name = "92HD90BXX", .patch = patch_stac92hd83xxx},
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index a76c326..63b0054 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -567,7 +567,7 @@
hda_nid_t nid = cfg->inputs[i].pin;
if (spec->smart51_enabled && is_smart51_pins(spec, nid))
ctl = PIN_OUT;
- else if (i == AUTO_PIN_MIC)
+ else if (cfg->inputs[i].type == AUTO_PIN_MIC)
ctl = PIN_VREF50;
else
ctl = PIN_IN;
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
index bb4bf65..0bb424a 100644
--- a/sound/soc/codecs/cx20442.c
+++ b/sound/soc/codecs/cx20442.c
@@ -367,7 +367,7 @@
return 0;
}
-static const u8 cx20442_reg = CX20442_TELOUT | CX20442_MIC;
+static const u8 cx20442_reg;
static struct snd_soc_codec_driver cx20442_codec_dev = {
.probe = cx20442_codec_probe,
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 987476a..017d99c 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -1482,7 +1482,7 @@
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
irq_mask);
- if (det && shrt) {
+ if (det || shrt) {
/* Enable mic detection, this may not have been set through
* platform data (eg, if the defaults are OK). */
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h
index e8490f3..e3ec243 100644
--- a/sound/soc/codecs/wm8903.h
+++ b/sound/soc/codecs/wm8903.h
@@ -165,7 +165,7 @@
#define WM8903_VMID_RES_50K 2
#define WM8903_VMID_RES_250K 3
-#define WM8903_VMID_RES_5K 4
+#define WM8903_VMID_RES_5K 6
/*
* R8 (0x08) - Analogue DAC 0
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 37b8aa8..4afbe3b 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -107,6 +107,12 @@
int revision;
struct wm8994_pdata *pdata;
+
+ unsigned int aif1clk_enable:1;
+ unsigned int aif2clk_enable:1;
+
+ unsigned int aif1clk_disable:1;
+ unsigned int aif2clk_disable:1;
};
static int wm8994_readable(unsigned int reg)
@@ -1004,6 +1010,110 @@
}
}
+static int late_enable_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ if (wm8994->aif1clk_enable) {
+ snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+ WM8994_AIF1CLK_ENA_MASK,
+ WM8994_AIF1CLK_ENA);
+ wm8994->aif1clk_enable = 0;
+ }
+ if (wm8994->aif2clk_enable) {
+ snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+ WM8994_AIF2CLK_ENA_MASK,
+ WM8994_AIF2CLK_ENA);
+ wm8994->aif2clk_enable = 0;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int late_disable_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMD:
+ if (wm8994->aif1clk_disable) {
+ snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+ WM8994_AIF1CLK_ENA_MASK, 0);
+ wm8994->aif1clk_disable = 0;
+ }
+ if (wm8994->aif2clk_disable) {
+ snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+ WM8994_AIF2CLK_ENA_MASK, 0);
+ wm8994->aif2clk_disable = 0;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int aif1clk_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ wm8994->aif1clk_enable = 1;
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8994->aif1clk_disable = 1;
+ break;
+ }
+
+ return 0;
+}
+
+static int aif2clk_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ wm8994->aif2clk_enable = 1;
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8994->aif2clk_disable = 1;
+ break;
+ }
+
+ return 0;
+}
+
+static int adc_mux_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ late_enable_ev(w, kcontrol, event);
+ return 0;
+}
+
+static int dac_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int mask = 1 << w->shift;
+
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+ mask, mask);
+ return 0;
+}
+
static const char *hp_mux_text[] = {
"Mixer",
"DAC",
@@ -1272,6 +1382,59 @@
static const struct snd_kcontrol_new aif2dacr_src_mux =
SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum);
+static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = {
+SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+ late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC1R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+ late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC2L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+ late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC2R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+ late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+
+SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev)
+};
+
+static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
+SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0)
+};
+
+static const struct snd_soc_dapm_widget wm8994_dac_revd_widgets[] = {
+SND_SOC_DAPM_DAC_E("DAC2L", NULL, SND_SOC_NOPM, 3, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC2R", NULL, SND_SOC_NOPM, 2, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1L", NULL, SND_SOC_NOPM, 1, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1R", NULL, SND_SOC_NOPM, 0, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_widget wm8994_dac_widgets[] = {
+SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
+SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = {
+SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = {
+SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
+SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
+};
+
static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("DMIC1DAT"),
SND_SOC_DAPM_INPUT("DMIC2DAT"),
@@ -1284,9 +1447,6 @@
SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0),
-SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
-SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0),
-
SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL,
0, WM8994_POWER_MANAGEMENT_4, 9, 0),
SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL,
@@ -1369,14 +1529,6 @@
SND_SOC_DAPM_ADC("ADCL", NULL, SND_SOC_NOPM, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
-SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
-SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
-
-SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
-SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
-SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
-SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
-
SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
@@ -1516,14 +1668,12 @@
{ "AIF2ADC Mux", "AIF3DACDAT", "AIF3ADCDAT" },
/* DAC1 inputs */
- { "DAC1L", NULL, "DAC1L Mixer" },
{ "DAC1L Mixer", "AIF2 Switch", "AIF2DACL" },
{ "DAC1L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
{ "DAC1L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
{ "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" },
{ "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" },
- { "DAC1R", NULL, "DAC1R Mixer" },
{ "DAC1R Mixer", "AIF2 Switch", "AIF2DACR" },
{ "DAC1R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
{ "DAC1R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
@@ -1532,7 +1682,6 @@
/* DAC2/AIF2 outputs */
{ "AIF2ADCL", NULL, "AIF2DAC2L Mixer" },
- { "DAC2L", NULL, "AIF2DAC2L Mixer" },
{ "AIF2DAC2L Mixer", "AIF2 Switch", "AIF2DACL" },
{ "AIF2DAC2L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
{ "AIF2DAC2L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
@@ -1540,7 +1689,6 @@
{ "AIF2DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" },
{ "AIF2ADCR", NULL, "AIF2DAC2R Mixer" },
- { "DAC2R", NULL, "AIF2DAC2R Mixer" },
{ "AIF2DAC2R Mixer", "AIF2 Switch", "AIF2DACR" },
{ "AIF2DAC2R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
{ "AIF2DAC2R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
@@ -1584,6 +1732,24 @@
{ "Right Headphone Mux", "DAC", "DAC1R" },
};
+static const struct snd_soc_dapm_route wm8994_lateclk_revd_intercon[] = {
+ { "DAC1L", NULL, "Late DAC1L Enable PGA" },
+ { "Late DAC1L Enable PGA", NULL, "DAC1L Mixer" },
+ { "DAC1R", NULL, "Late DAC1R Enable PGA" },
+ { "Late DAC1R Enable PGA", NULL, "DAC1R Mixer" },
+ { "DAC2L", NULL, "Late DAC2L Enable PGA" },
+ { "Late DAC2L Enable PGA", NULL, "AIF2DAC2L Mixer" },
+ { "DAC2R", NULL, "Late DAC2R Enable PGA" },
+ { "Late DAC2R Enable PGA", NULL, "AIF2DAC2R Mixer" }
+};
+
+static const struct snd_soc_dapm_route wm8994_lateclk_intercon[] = {
+ { "DAC1L", NULL, "DAC1L Mixer" },
+ { "DAC1R", NULL, "DAC1R Mixer" },
+ { "DAC2L", NULL, "AIF2DAC2L Mixer" },
+ { "DAC2R", NULL, "AIF2DAC2R Mixer" },
+};
+
static const struct snd_soc_dapm_route wm8994_revd_intercon[] = {
{ "AIF1DACDAT", NULL, "AIF2DACDAT" },
{ "AIF2DACDAT", NULL, "AIF1DACDAT" },
@@ -2514,6 +2680,22 @@
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int i, ret;
+ unsigned int val, mask;
+
+ if (wm8994->revision < 4) {
+ /* force a HW read */
+ val = wm8994_reg_read(codec->control_data,
+ WM8994_POWER_MANAGEMENT_5);
+
+ /* modify the cache only */
+ codec->cache_only = 1;
+ mask = WM8994_DAC1R_ENA | WM8994_DAC1L_ENA |
+ WM8994_DAC2R_ENA | WM8994_DAC2L_ENA;
+ val &= mask;
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+ mask, val);
+ codec->cache_only = 0;
+ }
/* Restore the registers */
ret = snd_soc_cache_sync(codec);
@@ -2847,11 +3029,10 @@
report |= SND_JACK_BTN_5;
done:
- snd_soc_jack_report(wm8994->micdet[0].jack,
+ snd_soc_jack_report(wm8994->micdet[0].jack, report,
SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 |
SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5 |
- SND_JACK_MICROPHONE | SND_JACK_VIDEOOUT,
- report);
+ SND_JACK_MICROPHONE | SND_JACK_VIDEOOUT);
}
/**
@@ -3125,6 +3306,21 @@
case WM8994:
snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
ARRAY_SIZE(wm8994_specific_dapm_widgets));
+ if (wm8994->revision < 4) {
+ snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
+ ARRAY_SIZE(wm8994_lateclk_revd_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_adc_revd_widgets,
+ ARRAY_SIZE(wm8994_adc_revd_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
+ ARRAY_SIZE(wm8994_dac_revd_widgets));
+ } else {
+ snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
+ ARRAY_SIZE(wm8994_lateclk_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
+ ARRAY_SIZE(wm8994_adc_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
+ ARRAY_SIZE(wm8994_dac_widgets));
+ }
break;
case WM8958:
snd_soc_add_controls(codec, wm8958_snd_controls,
@@ -3143,10 +3339,15 @@
snd_soc_dapm_add_routes(dapm, wm8994_intercon,
ARRAY_SIZE(wm8994_intercon));
- if (wm8994->revision < 4)
+ if (wm8994->revision < 4) {
snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon,
ARRAY_SIZE(wm8994_revd_intercon));
-
+ snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon,
+ ARRAY_SIZE(wm8994_lateclk_revd_intercon));
+ } else {
+ snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
+ ARRAY_SIZE(wm8994_lateclk_intercon));
+ }
break;
case WM8958:
snd_soc_dapm_add_routes(dapm, wm8958_intercon,
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 43825b2..cce704c 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -15,6 +15,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
@@ -1341,6 +1342,10 @@
wm9081->control_type = SND_SOC_I2C;
wm9081->control_data = i2c;
+ if (dev_get_platdata(&i2c->dev))
+ memcpy(&wm9081->retune, dev_get_platdata(&i2c->dev),
+ sizeof(wm9081->retune));
+
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm9081, &wm9081_dai, 1);
if (ret < 0)
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 613df5d..5168927 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -674,6 +674,9 @@
};
static const struct snd_soc_dapm_route analogue_routes[] = {
+ { "MICBIAS1", NULL, "CLK_SYS" },
+ { "MICBIAS2", NULL, "CLK_SYS" },
+
{ "IN1L PGA", "IN1LP Switch", "IN1LP" },
{ "IN1L PGA", "IN1LN Switch", "IN1LN" },
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index e20c9e1..1e9bcca 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -79,7 +79,7 @@
.name = "tlv320aic23",
.stream_name = "TLV320AIC23",
.codec_dai_name = "tlv320aic23-hifi",
- .platform_name = "imx-pcm-audio.0",
+ .platform_name = "imx-fiq-pcm-audio.0",
.codec_name = "tlv320aic23-codec.0-001a",
.cpu_dai_name = "imx-ssi.0",
.ops = &eukrea_tlv320_snd_ops,
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
index 28333e7..dc65650 100644
--- a/sound/soc/pxa/e740_wm9705.c
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -117,7 +117,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9705-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9705-codec",
@@ -126,7 +126,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name = "wm9705-aux",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9705-codec",
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c
index 01bf316..51897fc 100644
--- a/sound/soc/pxa/e750_wm9705.c
+++ b/sound/soc/pxa/e750_wm9705.c
@@ -99,7 +99,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9705-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9705-codec",
@@ -109,7 +109,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name ="wm9705-aux",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9705-codec",
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index c6a37c6..053ed20 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -89,7 +89,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9712-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
@@ -98,7 +98,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name ="wm9712-aux",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index fc22e6e..b13a425 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -37,7 +37,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9712-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
@@ -45,7 +45,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name ="wm9712-aux",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c
index 0d70fc8..38ca675 100644
--- a/sound/soc/pxa/mioa701_wm9713.c
+++ b/sound/soc/pxa/mioa701_wm9713.c
@@ -162,7 +162,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9713-hifi",
.codec_name = "wm9713-codec",
.init = mioa701_wm9713_init,
@@ -172,7 +172,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name ="wm9713-aux",
.codec_name = "wm9713-codec",
.platform_name = "pxa-pcm-audio",
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 857db96..504e400 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -132,7 +132,7 @@
{
.name = "AC97 HiFi",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9712-hifi",
.codec_name = "wm9712-codec",
.platform_name = "pxa-pcm-audio",
@@ -141,7 +141,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name = "wm9712-aux",
.codec_name = "wm9712-codec",
.platform_name = "pxa-pcm-audio",
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index f75804e..4b6e5d6 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -219,7 +219,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_dai_name = "wm9712-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
@@ -229,7 +229,7 @@
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_dai_name = "wm9712-aux",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm9712-codec",
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index b222a7d..25bba10 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -166,7 +166,7 @@
.stream_name = "AC97 HiFi",
.codec_name = "wm9713-codec",
.platform_name = "pxa-pcm-audio",
- .cpu_dai_name = "pxa-ac97.0",
+ .cpu_dai_name = "pxa2xx-ac97",
.codec_name = "wm9713-hifi",
.init = zylonite_wm9713_init,
},
@@ -175,7 +175,7 @@
.stream_name = "AC97 Aux",
.codec_name = "wm9713-codec",
.platform_name = "pxa-pcm-audio",
- .cpu_dai_name = "pxa-ac97.1",
+ .cpu_dai_name = "pxa2xx-ac97-aux",
.codec_name = "wm9713-aux",
},
{
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 8194f15..25e5423 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -712,7 +712,15 @@
!path->connected(path->source, path->sink))
continue;
- if (path->sink && path->sink->power_check &&
+ if (!path->sink)
+ continue;
+
+ if (path->sink->force) {
+ power = 1;
+ break;
+ }
+
+ if (path->sink->power_check &&
path->sink->power_check(path->sink)) {
power = 1;
break;
@@ -1627,6 +1635,7 @@
int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm)
{
struct snd_soc_dapm_widget *w;
+ unsigned int val;
list_for_each_entry(w, &dapm->card->widgets, list)
{
@@ -1675,6 +1684,18 @@
case snd_soc_dapm_post:
break;
}
+
+ /* Read the initial power state from the device */
+ if (w->reg >= 0) {
+ val = snd_soc_read(w->codec, w->reg);
+ val &= 1 << w->shift;
+ if (w->invert)
+ val = !val;
+
+ if (val)
+ w->power = 1;
+ }
+
w->new = 1;
}
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b9747..66eabaf 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@
}
dev->pcm->private_data = dev;
- strcpy(dev->pcm->name, dev->product_name);
+ strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c7..a1a4708 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@
if (ret < 0)
return ret;
- strcpy(rmidi->name, device->product_name);
+ strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
rmidi->private_data = device;
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 800f7cb..c0f8270 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -323,6 +323,7 @@
return -ENOMEM;
}
+ mutex_init(&chip->shutdown_mutex);
chip->index = idx;
chip->dev = dev;
chip->card = card;
@@ -531,6 +532,7 @@
chip = ptr;
card = chip->card;
mutex_lock(®ister_mutex);
+ mutex_lock(&chip->shutdown_mutex);
chip->shutdown = 1;
chip->num_interfaces--;
if (chip->num_interfaces <= 0) {
@@ -548,9 +550,11 @@
snd_usb_mixer_disconnect(p);
}
usb_chip[chip->index] = NULL;
+ mutex_unlock(&chip->shutdown_mutex);
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
+ mutex_unlock(&chip->shutdown_mutex);
mutex_unlock(®ister_mutex);
}
}
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 4132522..e3f6805 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -361,6 +361,7 @@
}
if (changed) {
+ mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
snd_usb_release_substream_urbs(subs, 0);
/* influenced: period_bytes, channels, rate, format, */
@@ -368,6 +369,7 @@
params_rate(hw_params),
snd_pcm_format_physical_width(params_format(hw_params)) *
params_channels(hw_params));
+ mutex_unlock(&subs->stream->chip->shutdown_mutex);
}
return ret;
@@ -385,8 +387,9 @@
subs->cur_audiofmt = NULL;
subs->cur_rate = 0;
subs->period_bytes = 0;
- if (!subs->stream->chip->shutdown)
- snd_usb_release_substream_urbs(subs, 0);
+ mutex_lock(&subs->stream->chip->shutdown_mutex);
+ snd_usb_release_substream_urbs(subs, 0);
+ mutex_unlock(&subs->stream->chip->shutdown_mutex);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index db3eb21..6e66fff 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -36,6 +36,7 @@
struct snd_card *card;
u32 usb_id;
int shutdown;
+ struct mutex shutdown_mutex;
unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
int num_interfaces;
int num_suspended_intf;
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 746cf03..0ace786 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -264,9 +264,6 @@
c->start_time = start;
if (p->start_time == 0 || p->start_time > start)
p->start_time = start;
-
- if (cpu > numcpus)
- numcpus = cpu;
}
#define MAX_CPUS 4096
@@ -511,6 +508,9 @@
if (!event_str)
return 0;
+ if (sample->cpu > numcpus)
+ numcpus = sample->cpu;
+
if (strcmp(event_str, "power:cpu_idle") == 0) {
struct power_processor_entry *ppe = (void *)te;
if (ppe->state == (u32)PWR_EVENT_EXIT)
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 32f4f1f..df51560 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -585,6 +585,7 @@
{
struct sort_entry *se;
u64 period, total, period_sys, period_us, period_guest_sys, period_guest_us;
+ u64 nr_events;
const char *sep = symbol_conf.field_sep;
int ret;
@@ -593,6 +594,7 @@
if (pair_hists) {
period = self->pair ? self->pair->period : 0;
+ nr_events = self->pair ? self->pair->nr_events : 0;
total = pair_hists->stats.total_period;
period_sys = self->pair ? self->pair->period_sys : 0;
period_us = self->pair ? self->pair->period_us : 0;
@@ -600,6 +602,7 @@
period_guest_us = self->pair ? self->pair->period_guest_us : 0;
} else {
period = self->period;
+ nr_events = self->nr_events;
total = session_total;
period_sys = self->period_sys;
period_us = self->period_us;
@@ -640,9 +643,9 @@
if (symbol_conf.show_nr_samples) {
if (sep)
- ret += snprintf(s + ret, size - ret, "%c%" PRIu64, *sep, period);
+ ret += snprintf(s + ret, size - ret, "%c%" PRIu64, *sep, nr_events);
else
- ret += snprintf(s + ret, size - ret, "%11" PRIu64, period);
+ ret += snprintf(s + ret, size - ret, "%11" PRIu64, nr_events);
}
if (pair_hists) {
diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
index fb737fe..96c8660 100644
--- a/tools/perf/util/svghelper.c
+++ b/tools/perf/util/svghelper.c
@@ -456,9 +456,9 @@
return;
svg_legenda_box(0, "Running", "sample");
- svg_legenda_box(100, "Idle","rect.c1");
- svg_legenda_box(200, "Deeper Idle", "rect.c3");
- svg_legenda_box(350, "Deepest Idle", "rect.c6");
+ svg_legenda_box(100, "Idle","c1");
+ svg_legenda_box(200, "Deeper Idle", "c3");
+ svg_legenda_box(350, "Deepest Idle", "c6");
svg_legenda_box(550, "Sleeping", "process2");
svg_legenda_box(650, "Waiting for cpu", "waiting");
svg_legenda_box(800, "Blocked on IO", "blocked");