| /* |
| * NXP TDA18212HN silicon tuner driver |
| * |
| * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include "tda18212.h" |
| |
| struct tda18212_priv { |
| struct tda18212_config *cfg; |
| struct i2c_adapter *i2c; |
| |
| u32 if_frequency; |
| }; |
| |
| #define dbg(fmt, arg...) \ |
| do { \ |
| if (debug) \ |
| pr_info("%s: " fmt, __func__, ##arg); \ |
| } while (0) |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); |
| |
| /* write multiple registers */ |
| static int tda18212_wr_regs(struct tda18212_priv *priv, u8 reg, u8 *val, |
| int len) |
| { |
| int ret; |
| u8 buf[len+1]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->cfg->i2c_address, |
| .flags = 0, |
| .len = sizeof(buf), |
| .buf = buf, |
| } |
| }; |
| |
| buf[0] = reg; |
| memcpy(&buf[1], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| pr_warn("i2c wr failed ret:%d reg:%02x len:%d\n", |
| ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int tda18212_rd_regs(struct tda18212_priv *priv, u8 reg, u8 *val, |
| int len) |
| { |
| int ret; |
| u8 buf[len]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = priv->cfg->i2c_address, |
| .flags = 0, |
| .len = 1, |
| .buf = ®, |
| }, { |
| .addr = priv->cfg->i2c_address, |
| .flags = I2C_M_RD, |
| .len = sizeof(buf), |
| .buf = buf, |
| } |
| }; |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| memcpy(val, buf, len); |
| ret = 0; |
| } else { |
| pr_warn("i2c rd failed ret:%d reg:%02x len:%d\n", |
| ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* write single register */ |
| static int tda18212_wr_reg(struct tda18212_priv *priv, u8 reg, u8 val) |
| { |
| return tda18212_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int tda18212_rd_reg(struct tda18212_priv *priv, u8 reg, u8 *val) |
| { |
| return tda18212_rd_regs(priv, reg, val, 1); |
| } |
| |
| #if 0 /* keep, useful when developing driver */ |
| static void tda18212_dump_regs(struct tda18212_priv *priv) |
| { |
| int i; |
| u8 buf[256]; |
| |
| #define TDA18212_RD_LEN 32 |
| for (i = 0; i < sizeof(buf); i += TDA18212_RD_LEN) |
| tda18212_rd_regs(priv, i, &buf[i], TDA18212_RD_LEN); |
| |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 32, 1, buf, |
| sizeof(buf), true); |
| |
| return; |
| } |
| #endif |
| |
| static int tda18212_set_params(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct tda18212_priv *priv = fe->tuner_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i; |
| u32 if_khz; |
| u8 buf[9]; |
| #define DVBT_6 0 |
| #define DVBT_7 1 |
| #define DVBT_8 2 |
| #define DVBT2_6 3 |
| #define DVBT2_7 4 |
| #define DVBT2_8 5 |
| #define DVBC_6 6 |
| #define DVBC_8 7 |
| static const u8 bw_params[][3] = { |
| /* reg: 0f 13 23 */ |
| [DVBT_6] = { 0xb3, 0x20, 0x03 }, |
| [DVBT_7] = { 0xb3, 0x31, 0x01 }, |
| [DVBT_8] = { 0xb3, 0x22, 0x01 }, |
| [DVBT2_6] = { 0xbc, 0x20, 0x03 }, |
| [DVBT2_7] = { 0xbc, 0x72, 0x03 }, |
| [DVBT2_8] = { 0xbc, 0x22, 0x01 }, |
| [DVBC_6] = { 0x92, 0x50, 0x03 }, |
| [DVBC_8] = { 0x92, 0x53, 0x03 }, |
| }; |
| |
| dbg("delsys=%d RF=%d BW=%d\n", |
| c->delivery_system, c->frequency, c->bandwidth_hz); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| if_khz = priv->cfg->if_dvbt_6; |
| i = DVBT_6; |
| break; |
| case 7000000: |
| if_khz = priv->cfg->if_dvbt_7; |
| i = DVBT_7; |
| break; |
| case 8000000: |
| if_khz = priv->cfg->if_dvbt_8; |
| i = DVBT_8; |
| break; |
| default: |
| ret = -EINVAL; |
| goto error; |
| } |
| break; |
| case SYS_DVBT2: |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| if_khz = priv->cfg->if_dvbt2_6; |
| i = DVBT2_6; |
| break; |
| case 7000000: |
| if_khz = priv->cfg->if_dvbt2_7; |
| i = DVBT2_7; |
| break; |
| case 8000000: |
| if_khz = priv->cfg->if_dvbt2_8; |
| i = DVBT2_8; |
| break; |
| default: |
| ret = -EINVAL; |
| goto error; |
| } |
| break; |
| case SYS_DVBC_ANNEX_A: |
| case SYS_DVBC_ANNEX_C: |
| if_khz = priv->cfg->if_dvbc; |
| i = DVBC_8; |
| break; |
| default: |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| ret = tda18212_wr_reg(priv, 0x23, bw_params[i][2]); |
| if (ret) |
| goto error; |
| |
| ret = tda18212_wr_reg(priv, 0x06, 0x00); |
| if (ret) |
| goto error; |
| |
| ret = tda18212_wr_reg(priv, 0x0f, bw_params[i][0]); |
| if (ret) |
| goto error; |
| |
| buf[0] = 0x02; |
| buf[1] = bw_params[i][1]; |
| buf[2] = 0x03; /* default value */ |
| buf[3] = DIV_ROUND_CLOSEST(if_khz, 50); |
| buf[4] = ((c->frequency / 1000) >> 16) & 0xff; |
| buf[5] = ((c->frequency / 1000) >> 8) & 0xff; |
| buf[6] = ((c->frequency / 1000) >> 0) & 0xff; |
| buf[7] = 0xc1; |
| buf[8] = 0x01; |
| ret = tda18212_wr_regs(priv, 0x12, buf, sizeof(buf)); |
| if (ret) |
| goto error; |
| |
| /* actual IF rounded as it is on register */ |
| priv->if_frequency = buf[3] * 50 * 1000; |
| |
| exit: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| return ret; |
| |
| error: |
| dbg("failed:%d\n", ret); |
| goto exit; |
| } |
| |
| static int tda18212_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct tda18212_priv *priv = fe->tuner_priv; |
| |
| *frequency = priv->if_frequency; |
| |
| return 0; |
| } |
| |
| static int tda18212_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| return 0; |
| } |
| |
| static const struct dvb_tuner_ops tda18212_tuner_ops = { |
| .info = { |
| .name = "NXP TDA18212", |
| |
| .frequency_min = 48000000, |
| .frequency_max = 864000000, |
| .frequency_step = 1000, |
| }, |
| |
| .release = tda18212_release, |
| |
| .set_params = tda18212_set_params, |
| .get_if_frequency = tda18212_get_if_frequency, |
| }; |
| |
| struct dvb_frontend *tda18212_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c, struct tda18212_config *cfg) |
| { |
| struct tda18212_priv *priv = NULL; |
| int ret; |
| u8 val; |
| |
| priv = kzalloc(sizeof(struct tda18212_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return NULL; |
| |
| priv->cfg = cfg; |
| priv->i2c = i2c; |
| fe->tuner_priv = priv; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ |
| |
| /* check if the tuner is there */ |
| ret = tda18212_rd_reg(priv, 0x00, &val); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ |
| |
| dbg("ret:%d chip ID:%02x\n", ret, val); |
| if (ret || val != 0xc7) { |
| kfree(priv); |
| return NULL; |
| } |
| |
| pr_info("NXP TDA18212HN successfully identified\n"); |
| |
| memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| return fe; |
| } |
| EXPORT_SYMBOL(tda18212_attach); |
| |
| MODULE_DESCRIPTION("NXP TDA18212HN silicon tuner driver"); |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_LICENSE("GPL"); |