Merge "ARM: dts: msm: Enable Camera Sensors for 8926 SKUG"
diff --git a/Documentation/devicetree/bindings/media/video/ovti-image-sensor.txt b/Documentation/devicetree/bindings/media/video/ovti-image-sensor.txt
new file mode 100644
index 0000000..cef9cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video/ovti-image-sensor.txt
@@ -0,0 +1,9 @@
+OmniVision Image Sensor Device Tree Bindings.
+========================================
+
+Boards with the OmniVision Image Sensor shall have the following properties:
+
+Required root node properties:
+ - compatible:
+ - "ovti,ov8865" : OmniVision OV8865 8 megapixel Image Sensor.
+ - "ovti,ov5648" : OmniVision OV5648 5 megapixel Image Sensor.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 9fd3afe..1eec990 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -36,6 +36,7 @@
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
+ovti OmniVision Technologies, Inc.
picochip Picochip Ltd
powervr Imagination Technologies
qcom Qualcomm, Inc.
diff --git a/arch/arm/boot/dts/msm8926-camera-sensor-qrd.dtsi b/arch/arm/boot/dts/msm8926-camera-sensor-qrd.dtsi
new file mode 100644
index 0000000..a85e048
--- /dev/null
+++ b/arch/arm/boot/dts/msm8926-camera-sensor-qrd.dtsi
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+
+ led_flash0: qcom,camera-led-flash {
+ cell-index = <0>;
+ compatible = "qcom,camera-led-flash";
+ qcom,flash-type = <1>;
+ qcom,flash-source = <&pm8226_flash0 &pm8226_flash1>;
+ qcom,torch-source = <&pm8226_torch>;
+ };
+};
+
+&cci {
+
+ actuator0: qcom,actuator@6e {
+ cell-index = <5>;
+ reg = <0x18>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <0>;
+ };
+
+ qcom,camera@20 {
+ compatible = "ovti,ov8865";
+ reg = <0x20>;
+ qcom,slave-id = <0x20 0x300b 0x8865>;
+ qcom,csiphy-sd-index = <0>;
+ qcom,csid-sd-index = <0>;
+ qcom,actuator-src = <&actuator0>;
+ qcom,led-flash-src = <&led_flash0>;
+ qcom,mount-angle = <90>;
+ qcom,sensor-name = "ov8865_q8v18a";
+ cam_vdig-supply = <&pm8226_l5>;
+ cam_vana-supply = <&pm8226_l19>;
+ cam_vio-supply = <&pm8226_lvs1>;
+ cam_vaf-supply = <&pm8226_l15>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
+ "cam_vaf";
+ qcom,cam-vreg-type = <0 1 0 0>;
+ qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;
+ qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;
+ qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 26 0>,
+ <&msmgpio 37 0>,
+ <&msmgpio 36 0>,
+ <&msmgpio 15 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-af-pwdm = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET1",
+ "CAM_STANDBY",
+ "CAM_AF_PWDM";
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x1F>;
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ };
+
+ qcom,camera@6a {
+ compatible = "ovti,ov5648";
+ reg = <0x6a>;
+ qcom,slave-id = <0x6c 0x300a 0x5648>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,csid-sd-index = <1>;
+ qcom,mount-angle = <270>;
+ qcom,sensor-name = "ov5648_oty5f03";
+ cam_vdig-supply = <&pm8226_l5>;
+ cam_vana-supply = <&pm8226_l19>;
+ cam_vio-supply = <&pm8226_lvs1>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-type = <0 1 0>;
+ qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-op-mode = <200000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 26 0>,
+ <&msmgpio 28 0>,
+ <&msmgpio 35 0>,
+ <&msmgpio 23 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-vdig = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET",
+ "CAM_STANDBY",
+ "CAM_VDIG";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 4000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x3>;
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ };
+};
diff --git a/arch/arm/boot/dts/msm8926-qrd-skug.dts b/arch/arm/boot/dts/msm8926-qrd-skug.dts
index b7826e5..92e322d 100644
--- a/arch/arm/boot/dts/msm8926-qrd-skug.dts
+++ b/arch/arm/boot/dts/msm8926-qrd-skug.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "msm8926.dtsi"
/include/ "msm8226-qrd.dtsi"
+/include/ "msm8926-camera-sensor-qrd.dtsi"
/ {
model = "Qualcomm MSM 8926 QRD SKUG";