blob: b0481a01df4a80f6f026296e918fa85d3378eb8a [file] [log] [blame]
/* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_BOARD_7627A__
#define __ARCH_ARM_MACH_MSM_BOARD_7627A__
void __init msm7627a_init_mmc(void);
void __init msm_msm7627a_allocate_memory_regions(void);
void __init msm_fb_add_devices(void);
enum {
GPIO_EXPANDER_IRQ_BASE = NR_MSM_IRQS + NR_GPIO_IRQS,
GPIO_EXPANDER_GPIO_BASE = NR_MSM_GPIOS,
/* SURF expander */
GPIO_CORE_EXPANDER_BASE = GPIO_EXPANDER_GPIO_BASE,
GPIO_BT_SYS_REST_EN = GPIO_CORE_EXPANDER_BASE,
GPIO_WLAN_EXT_POR_N,
GPIO_DISPLAY_PWR_EN,
GPIO_BACKLIGHT_EN,
GPIO_PRESSURE_XCLR,
GPIO_VREG_S3_EXP,
GPIO_UBM2M_PWRDWN,
GPIO_ETM_MODE_CS_N,
GPIO_HOST_VBUS_EN,
GPIO_SPI_MOSI,
GPIO_SPI_MISO,
GPIO_SPI_CLK,
GPIO_SPI_CS0_N,
GPIO_CORE_EXPANDER_IO13,
GPIO_CORE_EXPANDER_IO14,
GPIO_CORE_EXPANDER_IO15,
/* Camera expander */
GPIO_CAM_EXPANDER_BASE = GPIO_CORE_EXPANDER_BASE + 16,
GPIO_CAM_GP_STROBE_READY = GPIO_CAM_EXPANDER_BASE,
GPIO_CAM_GP_AFBUSY,
GPIO_CAM_GP_CAM_PWDN,
GPIO_CAM_GP_CAM1MP_XCLR,
GPIO_CAM_GP_CAMIF_RESET_N,
GPIO_CAM_GP_STROBE_CE,
GPIO_CAM_GP_LED_EN1,
GPIO_CAM_GP_LED_EN2,
};
enum {
QRD_GPIO_HOST_VBUS_EN = 107,
QRD_GPIO_BT_SYS_REST_EN = 114,
QRD_GPIO_WAKE_ON_WIRELESS,
QRD_GPIO_BACKLIGHT_EN,
QRD_GPIO_NC,
QRD_GPIO_CAM_3MP_PWDN, /* CAM_VGA */
QRD_GPIO_WLAN_EN,
QRD_GPIO_CAM_5MP_SHDN_EN,
QRD_GPIO_CAM_5MP_RESET,
QRD_GPIO_TP,
QRD_GPIO_CAM_GP_CAMIF_RESET,
};
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
#define FPGA_MSM_CNTRL_REG2 0x90008010
#define BAHAMA_SLAVE_ID_FM_REG 0x02
#define BAHAMA_SLAVE_ID_FM_ADDR 0x2A
#define BAHAMA_SLAVE_ID_QMEMBIST_ADDR 0x7B
#define FM_GPIO 83
#define BT_PCM_BCLK_MODE 0x88
#define BT_PCM_DIN_MODE 0x89
#define BT_PCM_DOUT_MODE 0x8A
#define BT_PCM_SYNC_MODE 0x8B
#define FM_I2S_SD_MODE 0x8E
#define FM_I2S_WS_MODE 0x8F
#define FM_I2S_SCK_MODE 0x90
#define I2C_PIN_CTL 0x15
#define I2C_NORMAL 0x40
struct bahama_config_register {
u8 reg;
u8 value;
u8 mask;
};
struct bt_vreg_info {
const char *name;
unsigned int pmapp_id;
unsigned int min_level;
unsigned int max_level;
unsigned int is_pin_controlled;
struct regulator *reg;
};
extern struct platform_device msm_bt_power_device;
void __init msm7627a_bt_power_init(void);
#endif
void __init msm7627a_camera_init(void);
#endif