Merge "msm: board-msm7627a-camera: Create separate board file for camera" into msm-3.0
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 95f2535..297d4e0 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -225,10 +225,10 @@
obj-$(CONFIG_MACH_MSM7X27_SURF) += board-msm7x27.o devices-msm7x27.o
obj-$(CONFIG_MACH_MSM7X27_FFA) += board-msm7x27.o devices-msm7x27.o
obj-$(CONFIG_ARCH_MSM7X27A) += clock-pcom-lookup.o devices-msm7x27a.o
-obj-$(CONFIG_MACH_MSM7X27A_RUMI3) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o
-obj-$(CONFIG_MACH_MSM7X27A_SURF) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o
-obj-$(CONFIG_MACH_MSM7X27A_FFA) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o
-obj-$(CONFIG_MACH_MSM7627A_QRD1) += board-qrd7627a.o board-msm7627a-storage.o board-msm7627a-bt.o
+obj-$(CONFIG_MACH_MSM7X27A_RUMI3) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o board-msm7627a-camera.o
+obj-$(CONFIG_MACH_MSM7X27A_SURF) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o board-msm7627a-camera.o
+obj-$(CONFIG_MACH_MSM7X27A_FFA) += board-msm7x27a.o board-msm7627a-storage.o board-msm7627a-bt.o board-msm7627a-camera.o
+obj-$(CONFIG_MACH_MSM7627A_QRD1) += board-qrd7627a.o board-msm7627a-storage.o board-msm7627a-bt.o board-msm7627a-camera.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o memory_topology.o
obj-$(CONFIG_ARCH_MSM7X30) += clock-local.o clock-7x30.o acpuclock-7x30.o
obj-$(CONFIG_MACH_MSM7X25_SURF) += board-msm7x27.o devices-msm7x25.o
diff --git a/arch/arm/mach-msm/board-msm7627a-camera.c b/arch/arm/mach-msm/board-msm7627a-camera.c
new file mode 100644
index 0000000..61a6c6b
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7627a-camera.c
@@ -0,0 +1,527 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/sx150x.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <asm/mach-types.h>
+#include <mach/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/irqs-7xxx.h>
+#include "devices-msm7x2xa.h"
+#include "board-msm7627a.h"
+
+static uint32_t camera_off_gpio_table[] = {
+ GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
+};
+
+static uint32_t camera_on_gpio_table[] = {
+ GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
+};
+
+#ifdef CONFIG_MSM_CAMERA_FLASH
+static struct msm_camera_sensor_flash_src msm_flash_src = {
+ .flash_sr_type = MSM_CAMERA_FLASH_SRC_EXT,
+ ._fsrc.ext_driver_src.led_en = GPIO_CAM_GP_LED_EN1,
+ ._fsrc.ext_driver_src.led_flash_en = GPIO_CAM_GP_LED_EN2,
+};
+#endif
+
+static struct regulator_bulk_data regs_camera[] = {
+ { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
+ { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
+ { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 },
+};
+
+void qrd1_camera_gpio_cfg(void)
+{
+
+ int rc = 0;
+
+ rc = gpio_request(QRD_GPIO_CAM_5MP_SHDN_EN, "ov5640");
+ if (rc < 0)
+ pr_err("%s: gpio_request---GPIO_CAM_5MP_SHDN_EN failed!",
+ __func__);
+
+
+ rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_5MP_SHDN_EN, 0,
+ GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
+ GPIO_CFG_2MA), GPIO_CFG_ENABLE);
+ if (rc < 0) {
+ pr_err("%s: unable to enable Power Down gpio for main"
+ "camera!\n", __func__);
+ gpio_free(QRD_GPIO_CAM_5MP_SHDN_EN);
+ }
+
+
+ rc = gpio_request(QRD_GPIO_CAM_5MP_RESET, "ov5640");
+ if (rc < 0) {
+ pr_err("%s: gpio_request---GPIO_CAM_5MP_RESET failed!",
+ __func__);
+ gpio_free(QRD_GPIO_CAM_5MP_SHDN_EN);
+ }
+
+
+ rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_5MP_RESET, 0,
+ GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
+ GPIO_CFG_2MA), GPIO_CFG_ENABLE);
+ if (rc < 0) {
+ pr_err("%s: unable to enable reset gpio for main camera!\n",
+ __func__);
+ gpio_free(QRD_GPIO_CAM_5MP_RESET);
+ }
+
+ rc = gpio_request(QRD_GPIO_CAM_3MP_PWDN, "ov7692");
+ if (rc < 0)
+ pr_err("%s: gpio_request---GPIO_CAM_3MP_PWDN failed!",
+ __func__);
+
+ rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_CAM_3MP_PWDN, 0,
+ GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
+ GPIO_CFG_2MA), GPIO_CFG_ENABLE);
+ if (rc < 0) {
+ pr_err("%s: unable to enable Power Down gpio for front"
+ "camera!\n", __func__);
+ gpio_free(QRD_GPIO_CAM_3MP_PWDN);
+ }
+
+ gpio_direction_output(QRD_GPIO_CAM_5MP_SHDN_EN, 1);
+ gpio_direction_output(QRD_GPIO_CAM_5MP_RESET, 1);
+ gpio_direction_output(QRD_GPIO_CAM_3MP_PWDN, 1);
+}
+
+static void msm_camera_vreg_config(int vreg_en)
+{
+ int rc = vreg_en ?
+ regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) :
+ regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera);
+
+ if (rc)
+ pr_err("%s: could not %sable regulators: %d\n",
+ __func__, vreg_en ? "en" : "dis", rc);
+}
+
+static int config_gpio_table(uint32_t *table, int len)
+{
+ int rc = 0, i = 0;
+
+ for (i = 0; i < len; i++) {
+ rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE);
+ if (rc) {
+ pr_err("%s not able to get gpio\n", __func__);
+ for (i--; i >= 0; i--)
+ gpio_tlmm_config(camera_off_gpio_table[i],
+ GPIO_CFG_ENABLE);
+ break;
+ }
+ }
+ return rc;
+}
+
+static int config_camera_on_gpios_rear(void)
+{
+ int rc = 0;
+
+ if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
+ msm_camera_vreg_config(1);
+
+ rc = config_gpio_table(camera_on_gpio_table,
+ ARRAY_SIZE(camera_on_gpio_table));
+ if (rc < 0) {
+ pr_err("%s: CAMSENSOR gpio table request"
+ "failed\n", __func__);
+ return rc;
+ }
+
+ return rc;
+}
+
+static void config_camera_off_gpios_rear(void)
+{
+ if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
+ msm_camera_vreg_config(0);
+
+ config_gpio_table(camera_off_gpio_table,
+ ARRAY_SIZE(camera_off_gpio_table));
+}
+
+static int config_camera_on_gpios_front(void)
+{
+ int rc = 0;
+
+ if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
+ msm_camera_vreg_config(1);
+
+ rc = config_gpio_table(camera_on_gpio_table,
+ ARRAY_SIZE(camera_on_gpio_table));
+ if (rc < 0) {
+ pr_err("%s: CAMSENSOR gpio table request"
+ "failed\n", __func__);
+ return rc;
+ }
+
+ return rc;
+}
+
+static void config_camera_off_gpios_front(void)
+{
+ if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
+ msm_camera_vreg_config(0);
+
+ config_gpio_table(camera_off_gpio_table,
+ ARRAY_SIZE(camera_off_gpio_table));
+}
+
+struct msm_camera_device_platform_data msm_camera_device_data_rear = {
+ .camera_gpio_on = config_camera_on_gpios_rear,
+ .camera_gpio_off = config_camera_off_gpios_rear,
+ .ioext.csiphy = 0xA1000000,
+ .ioext.csisz = 0x00100000,
+ .ioext.csiirq = INT_CSI_IRQ_1,
+ .ioclk.mclk_clk_rate = 24000000,
+ .ioclk.vfe_clk_rate = 192000000,
+ .ioext.appphy = MSM_CLK_CTL_PHYS,
+ .ioext.appsz = MSM_CLK_CTL_SIZE,
+};
+
+struct msm_camera_device_platform_data msm_camera_device_data_front = {
+ .camera_gpio_on = config_camera_on_gpios_front,
+ .camera_gpio_off = config_camera_off_gpios_front,
+ .ioext.csiphy = 0xA0F00000,
+ .ioext.csisz = 0x00100000,
+ .ioext.csiirq = INT_CSI_IRQ_0,
+ .ioclk.mclk_clk_rate = 24000000,
+ .ioclk.vfe_clk_rate = 192000000,
+ .ioext.appphy = MSM_CLK_CTL_PHYS,
+ .ioext.appsz = MSM_CLK_CTL_SIZE,
+};
+
+#ifdef CONFIG_S5K4E1
+static struct msm_camera_sensor_platform_info s5k4e1_sensor_7627a_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_data flash_s5k4e1 = {
+ .flash_type = MSM_CAMERA_FLASH_LED,
+ .flash_src = &msm_flash_src
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data = {
+ .sensor_name = "s5k4e1",
+ .sensor_reset_enable = 1,
+ .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N,
+ .sensor_pwd = 85,
+ .vcm_pwd = GPIO_CAM_GP_CAM_PWDN,
+ .vcm_enable = 1,
+ .pdata = &msm_camera_device_data_rear,
+ .flash_data = &flash_s5k4e1,
+ .sensor_platform_info = &s5k4e1_sensor_7627a_info,
+ .csi_if = 1
+};
+
+static struct platform_device msm_camera_sensor_s5k4e1 = {
+ .name = "msm_camera_s5k4e1",
+ .dev = {
+ .platform_data = &msm_camera_sensor_s5k4e1_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_IMX072
+static struct msm_camera_sensor_platform_info imx072_sensor_7627a_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_data flash_imx072 = {
+ .flash_type = MSM_CAMERA_FLASH_LED,
+ .flash_src = &msm_flash_src
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_imx072_data = {
+ .sensor_name = "imx072",
+ .sensor_reset_enable = 1,
+ .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, /* TODO 106,*/
+ .sensor_pwd = 85,
+ .vcm_pwd = GPIO_CAM_GP_CAM_PWDN,
+ .vcm_enable = 1,
+ .pdata = &msm_camera_device_data_rear,
+ .flash_data = &flash_imx072,
+ .sensor_platform_info = &imx072_sensor_7627a_info,
+ .csi_if = 1
+};
+
+static struct platform_device msm_camera_sensor_imx072 = {
+ .name = "msm_camera_imx072",
+ .dev = {
+ .platform_data = &msm_camera_sensor_imx072_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_WEBCAM_OV9726
+static struct msm_camera_sensor_platform_info ov9726_sensor_7627a_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_data flash_ov9726 = {
+ .flash_type = MSM_CAMERA_FLASH_NONE,
+ .flash_src = &msm_flash_src
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data = {
+ .sensor_name = "ov9726",
+ .sensor_reset_enable = 0,
+ .sensor_reset = GPIO_CAM_GP_CAM1MP_XCLR,
+ .sensor_pwd = 85,
+ .vcm_pwd = 1,
+ .vcm_enable = 0,
+ .pdata = &msm_camera_device_data_front,
+ .flash_data = &flash_ov9726,
+ .sensor_platform_info = &ov9726_sensor_7627a_info,
+ .csi_if = 1
+};
+
+static struct platform_device msm_camera_sensor_ov9726 = {
+ .name = "msm_camera_ov9726",
+ .dev = {
+ .platform_data = &msm_camera_sensor_ov9726_data,
+ },
+};
+#else
+static inline void msm_camera_vreg_init(void) { }
+#endif
+
+#ifdef CONFIG_MT9E013
+static struct msm_camera_sensor_platform_info mt9e013_sensor_7627a_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_data flash_mt9e013 = {
+ .flash_type = MSM_CAMERA_FLASH_LED,
+ .flash_src = &msm_flash_src
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_mt9e013_data = {
+ .sensor_name = "mt9e013",
+ .sensor_reset = 0,
+ .sensor_reset_enable = 1,
+ .sensor_pwd = 85,
+ .vcm_pwd = 1,
+ .vcm_enable = 0,
+ .pdata = &msm_camera_device_data_rear,
+ .flash_data = &flash_mt9e013,
+ .sensor_platform_info = &mt9e013_sensor_7627a_info,
+ .csi_if = 1
+};
+
+static struct platform_device msm_camera_sensor_mt9e013 = {
+ .name = "msm_camera_mt9e013",
+ .dev = {
+ .platform_data = &msm_camera_sensor_mt9e013_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_OV5640
+static struct msm_camera_sensor_platform_info ov5640_sensor_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_src msm_flash_src_ov5640 = {
+ .flash_sr_type = MSM_CAMERA_FLASH_SRC_LED,
+ ._fsrc.led_src.led_name = "flashlight",
+ ._fsrc.led_src.led_name_len = 10,
+};
+
+static struct msm_camera_sensor_flash_data flash_ov5640 = {
+ .flash_type = MSM_CAMERA_FLASH_LED,
+ .flash_src = &msm_flash_src_ov5640,
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_ov5640_data = {
+ .sensor_name = "ov5640",
+ .sensor_reset_enable = 1,
+ .sensor_reset = QRD_GPIO_CAM_5MP_RESET,
+ .sensor_pwd = QRD_GPIO_CAM_5MP_SHDN_EN,
+ .vcm_pwd = 0,
+ .vcm_enable = 0,
+ .pdata = &msm_camera_device_data_rear,
+ .flash_data = &flash_ov5640,
+ .sensor_platform_info = &ov5640_sensor_info,
+ .csi_if = 1,
+};
+
+static struct platform_device msm_camera_sensor_ov5640 = {
+ .name = "msm_camera_ov5640",
+ .dev = {
+ .platform_data = &msm_camera_sensor_ov5640_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_WEBCAM_OV7692_QRD
+static struct msm_camera_sensor_platform_info ov7692_sensor_7627a_info = {
+ .mount_angle = 90
+};
+
+static struct msm_camera_sensor_flash_data flash_ov7692 = {
+ .flash_type = MSM_CAMERA_FLASH_NONE,
+};
+
+static struct msm_camera_sensor_info msm_camera_sensor_ov7692_data = {
+ .sensor_name = "ov7692",
+ .sensor_reset_enable = 0,
+ .sensor_reset = 0,
+ .sensor_pwd = QRD_GPIO_CAM_3MP_PWDN,
+ .vcm_pwd = 0,
+ .vcm_enable = 0,
+ .pdata = &msm_camera_device_data_front,
+ .flash_data = &flash_ov7692,
+ .sensor_platform_info = &ov7692_sensor_7627a_info,
+ .csi_if = 1,
+};
+
+static struct platform_device msm_camera_sensor_ov7692 = {
+ .name = "msm_camera_ov7692",
+ .dev = {
+ .platform_data = &msm_camera_sensor_ov7692_data,
+ },
+};
+#endif
+
+enum {
+ SX150X_CAM,
+};
+
+static struct sx150x_platform_data sx150x_data[] __initdata = {
+ [SX150X_CAM] = {
+ .gpio_base = GPIO_CAM_EXPANDER_BASE,
+ .oscio_is_gpo = false,
+ .io_pullup_ena = 0,
+ .io_pulldn_ena = 0,
+ .io_open_drain_ena = 0x23,
+ .irq_summary = -1,
+ },
+};
+
+static struct i2c_board_info cam_exp_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("sx1508q", 0x22),
+ .platform_data = &sx150x_data[SX150X_CAM],
+ },
+};
+
+static struct i2c_board_info i2c_camera_devices[] = {
+ #ifdef CONFIG_S5K4E1
+ {
+ I2C_BOARD_INFO("s5k4e1", 0x36),
+ },
+ {
+ I2C_BOARD_INFO("s5k4e1_af", 0x8c >> 1),
+ },
+ #endif
+ #ifdef CONFIG_WEBCAM_OV9726
+ {
+ I2C_BOARD_INFO("ov9726", 0x10),
+ },
+ #endif
+ #ifdef CONFIG_IMX072
+ {
+ I2C_BOARD_INFO("imx072", 0x34),
+ },
+ #endif
+ #ifdef CONFIG_MT9E013
+ {
+ I2C_BOARD_INFO("mt9e013", 0x6C >> 2),
+ },
+ #endif
+ {
+ I2C_BOARD_INFO("sc628a", 0x6E),
+ },
+};
+
+static struct i2c_board_info i2c_camera_devices_qrd[] = {
+ #ifdef CONFIG_OV5640
+ {
+ I2C_BOARD_INFO("ov5640", 0x78 >> 1),
+ },
+ #endif
+ #ifdef CONFIG_WEBCAM_OV7692_QRD
+ {
+ I2C_BOARD_INFO("ov7692", 0x78),
+ },
+ #endif
+};
+
+static struct platform_device *camera_devices[] __initdata = {
+#ifdef CONFIG_S5K4E1
+ &msm_camera_sensor_s5k4e1,
+#endif
+#ifdef CONFIG_IMX072
+ &msm_camera_sensor_imx072,
+#endif
+#ifdef CONFIG_WEBCAM_OV9726
+ &msm_camera_sensor_ov9726,
+#endif
+#ifdef CONFIG_MT9E013
+ &msm_camera_sensor_mt9e013,
+#endif
+#ifdef CONFIG_OV5640
+ &msm_camera_sensor_ov5640,
+#endif
+#ifdef CONFIG_WEBCAM_OV7692_QRD
+ &msm_camera_sensor_ov7692,
+#endif
+};
+
+static void __init register_i2c_devices(void)
+{
+ i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
+ cam_exp_i2c_info,
+ ARRAY_SIZE(cam_exp_i2c_info));
+}
+
+void __init msm_camera_vreg_init(void)
+{
+ int rc;
+ platform_add_devices(camera_devices,
+ ARRAY_SIZE(camera_devices));
+
+ if (!machine_is_msm7627a_qrd1())
+ register_i2c_devices();
+
+ rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
+
+ if (rc) {
+ pr_err("%s: could not get regulators: %d\n", __func__, rc);
+ return;
+ }
+
+ rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
+
+ if (rc) {
+ pr_err("%s: could not set voltages: %d\n", __func__, rc);
+ return;
+ }
+
+ if (machine_is_msm7627a_qrd1())
+ i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
+ i2c_camera_devices_qrd,
+ ARRAY_SIZE(i2c_camera_devices_qrd));
+ else
+ i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
+ i2c_camera_devices,
+ ARRAY_SIZE(i2c_camera_devices));
+}
diff --git a/arch/arm/mach-msm/board-msm7627a.h b/arch/arm/mach-msm/board-msm7627a.h
index 4680a31..d470cab 100644
--- a/arch/arm/mach-msm/board-msm7627a.h
+++ b/arch/arm/mach-msm/board-msm7627a.h
@@ -15,6 +15,53 @@
void __init msm7627a_init_mmc(void);
+enum {
+ GPIO_EXPANDER_IRQ_BASE = NR_MSM_IRQS + NR_GPIO_IRQS,
+ GPIO_EXPANDER_GPIO_BASE = NR_MSM_GPIOS,
+ /* SURF expander */
+ GPIO_CORE_EXPANDER_BASE = GPIO_EXPANDER_GPIO_BASE,
+ GPIO_BT_SYS_REST_EN = GPIO_CORE_EXPANDER_BASE,
+ GPIO_WLAN_EXT_POR_N,
+ GPIO_DISPLAY_PWR_EN,
+ GPIO_BACKLIGHT_EN,
+ GPIO_PRESSURE_XCLR,
+ GPIO_VREG_S3_EXP,
+ GPIO_UBM2M_PWRDWN,
+ GPIO_ETM_MODE_CS_N,
+ GPIO_HOST_VBUS_EN,
+ GPIO_SPI_MOSI,
+ GPIO_SPI_MISO,
+ GPIO_SPI_CLK,
+ GPIO_SPI_CS0_N,
+ GPIO_CORE_EXPANDER_IO13,
+ GPIO_CORE_EXPANDER_IO14,
+ GPIO_CORE_EXPANDER_IO15,
+ /* Camera expander */
+ GPIO_CAM_EXPANDER_BASE = GPIO_CORE_EXPANDER_BASE + 16,
+ GPIO_CAM_GP_STROBE_READY = GPIO_CAM_EXPANDER_BASE,
+ GPIO_CAM_GP_AFBUSY,
+ GPIO_CAM_GP_CAM_PWDN,
+ GPIO_CAM_GP_CAM1MP_XCLR,
+ GPIO_CAM_GP_CAMIF_RESET_N,
+ GPIO_CAM_GP_STROBE_CE,
+ GPIO_CAM_GP_LED_EN1,
+ GPIO_CAM_GP_LED_EN2,
+};
+
+enum {
+ QRD_GPIO_HOST_VBUS_EN = 107,
+ QRD_GPIO_BT_SYS_REST_EN = 114,
+ QRD_GPIO_WAKE_ON_WIRELESS,
+ QRD_GPIO_BACKLIGHT_EN,
+ QRD_GPIO_NC,
+ QRD_GPIO_CAM_3MP_PWDN, /* CAM_VGA */
+ QRD_GPIO_WLAN_EN,
+ QRD_GPIO_CAM_5MP_SHDN_EN,
+ QRD_GPIO_CAM_5MP_RESET,
+ QRD_GPIO_TP,
+ QRD_GPIO_CAM_GP_CAMIF_RESET,
+};
+
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
#define FPGA_MSM_CNTRL_REG2 0x90008010
@@ -30,7 +77,7 @@
#define FM_I2S_WS_MODE 0x8F
#define FM_I2S_SCK_MODE 0x90
#define I2C_PIN_CTL 0x15
-#define I2C_NORMAL 0x40
+#define I2C_NORMAL 0x40
struct bahama_config_register {
u8 reg;
@@ -52,4 +99,7 @@
void __init msm7627a_bt_power_init(void);
#endif
+void qrd1_camera_gpio_cfg(void);
+void __init msm_camera_vreg_init(void);
+
#endif
diff --git a/arch/arm/mach-msm/board-msm7x27a.c b/arch/arm/mach-msm/board-msm7x27a.c
index ec50104..7540aa9 100644
--- a/arch/arm/mach-msm/board-msm7x27a.c
+++ b/arch/arm/mach-msm/board-msm7x27a.c
@@ -58,39 +58,6 @@
#define PMEM_KERNEL_EBI1_SIZE 0x3A000
#define MSM_PMEM_AUDIO_SIZE 0x5B000
-enum {
- GPIO_EXPANDER_IRQ_BASE = NR_MSM_IRQS + NR_GPIO_IRQS,
- GPIO_EXPANDER_GPIO_BASE = NR_MSM_GPIOS,
- /* SURF expander */
- GPIO_CORE_EXPANDER_BASE = GPIO_EXPANDER_GPIO_BASE,
- GPIO_BT_SYS_REST_EN = GPIO_CORE_EXPANDER_BASE,
- GPIO_WLAN_EXT_POR_N,
- GPIO_DISPLAY_PWR_EN,
- GPIO_BACKLIGHT_EN,
- GPIO_PRESSURE_XCLR,
- GPIO_VREG_S3_EXP,
- GPIO_UBM2M_PWRDWN,
- GPIO_ETM_MODE_CS_N,
- GPIO_HOST_VBUS_EN,
- GPIO_SPI_MOSI,
- GPIO_SPI_MISO,
- GPIO_SPI_CLK,
- GPIO_SPI_CS0_N,
- GPIO_CORE_EXPANDER_IO13,
- GPIO_CORE_EXPANDER_IO14,
- GPIO_CORE_EXPANDER_IO15,
- /* Camera expander */
- GPIO_CAM_EXPANDER_BASE = GPIO_CORE_EXPANDER_BASE + 16,
- GPIO_CAM_GP_STROBE_READY = GPIO_CAM_EXPANDER_BASE,
- GPIO_CAM_GP_AFBUSY,
- GPIO_CAM_GP_CAM_PWDN,
- GPIO_CAM_GP_CAM1MP_XCLR,
- GPIO_CAM_GP_CAMIF_RESET_N,
- GPIO_CAM_GP_STROBE_CE,
- GPIO_CAM_GP_LED_EN1,
- GPIO_CAM_GP_LED_EN2,
-};
-
#if defined(CONFIG_GPIO_SX150X)
enum {
SX150X_CORE,
@@ -129,22 +96,11 @@
I2C_BOARD_INFO("sx1509q", 0x3e),
},
};
-static struct i2c_board_info cam_exp_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("sx1508q", 0x22),
- .platform_data = &sx150x_data[SX150X_CAM],
- },
-};
#endif
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
static void __init register_i2c_devices(void)
{
-
- i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
- cam_exp_i2c_info,
- ARRAY_SIZE(cam_exp_i2c_info));
-
if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf())
sx150x_data[SX150X_CORE].io_open_drain_ena = 0xe0f0;
@@ -954,311 +910,6 @@
gpio_set_value(ETH_FIFO_SEL_GPIO, 0);
}
-#ifdef CONFIG_MSM_CAMERA
-static uint32_t camera_off_gpio_table[] = {
- GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static uint32_t camera_on_gpio_table[] = {
- GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-#ifdef CONFIG_MSM_CAMERA_FLASH
-static struct msm_camera_sensor_flash_src msm_flash_src = {
- .flash_sr_type = MSM_CAMERA_FLASH_SRC_EXT,
- ._fsrc.ext_driver_src.led_en = GPIO_CAM_GP_LED_EN1,
- ._fsrc.ext_driver_src.led_flash_en = GPIO_CAM_GP_LED_EN2,
-};
-#endif
-
-static struct regulator_bulk_data regs_camera[] = {
- { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
- { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
- { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 },
-};
-
-static void __init msm_camera_vreg_init(void)
-{
- int rc;
-
- rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
-
- if (rc) {
- pr_err("%s: could not get regulators: %d\n", __func__, rc);
- return;
- }
-
- rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
-
- if (rc) {
- pr_err("%s: could not set voltages: %d\n", __func__, rc);
- return;
- }
-}
-
-static void msm_camera_vreg_config(int vreg_en)
-{
- int rc = vreg_en ?
- regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) :
- regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera);
-
- if (rc)
- pr_err("%s: could not %sable regulators: %d\n",
- __func__, vreg_en ? "en" : "dis", rc);
-}
-
-static int config_gpio_table(uint32_t *table, int len)
-{
- int rc = 0, i = 0;
-
- for (i = 0; i < len; i++) {
- rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("%s not able to get gpio\n", __func__);
- for (i--; i >= 0; i--)
- gpio_tlmm_config(camera_off_gpio_table[i],
- GPIO_CFG_ENABLE);
- break;
- }
- }
- return rc;
-}
-
-static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data;
-static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data;
-static int config_camera_on_gpios_rear(void)
-{
- int rc = 0;
-
- if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_rear(void)
-{
- if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
- msm_camera_vreg_config(0);
-
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-static int config_camera_on_gpios_front(void)
-{
- int rc = 0;
-
- if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_front(void)
-{
- if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
- msm_camera_vreg_config(0);
-
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-struct msm_camera_device_platform_data msm_camera_device_data_rear = {
- .camera_gpio_on = config_camera_on_gpios_rear,
- .camera_gpio_off = config_camera_off_gpios_rear,
- .ioext.csiphy = 0xA1000000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_1,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-struct msm_camera_device_platform_data msm_camera_device_data_front = {
- .camera_gpio_on = config_camera_on_gpios_front,
- .camera_gpio_off = config_camera_off_gpios_front,
- .ioext.csiphy = 0xA0F00000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_0,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-#ifdef CONFIG_S5K4E1
-static struct msm_camera_sensor_platform_info s5k4e1_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_s5k4e1 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_s5k4e1_data = {
- .sensor_name = "s5k4e1",
- .sensor_reset_enable = 1,
- .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N,
- .sensor_pwd = 85,
- .vcm_pwd = GPIO_CAM_GP_CAM_PWDN,
- .vcm_enable = 1,
- .pdata = &msm_camera_device_data_rear,
- .flash_data = &flash_s5k4e1,
- .sensor_platform_info = &s5k4e1_sensor_7627a_info,
- .csi_if = 1
-};
-
-static struct platform_device msm_camera_sensor_s5k4e1 = {
- .name = "msm_camera_s5k4e1",
- .dev = {
- .platform_data = &msm_camera_sensor_s5k4e1_data,
- },
-};
-#endif
-
-#ifdef CONFIG_IMX072
-static struct msm_camera_sensor_platform_info imx072_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_imx072 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_imx072_data = {
- .sensor_name = "imx072",
- .sensor_reset_enable = 1,
- .sensor_reset = GPIO_CAM_GP_CAMIF_RESET_N, /* TODO 106,*/
- .sensor_pwd = 85,
- .vcm_pwd = GPIO_CAM_GP_CAM_PWDN,
- .vcm_enable = 1,
- .pdata = &msm_camera_device_data_rear,
- .flash_data = &flash_imx072,
- .sensor_platform_info = &imx072_sensor_7627a_info,
- .csi_if = 1
-};
-
-static struct platform_device msm_camera_sensor_imx072 = {
- .name = "msm_camera_imx072",
- .dev = {
- .platform_data = &msm_camera_sensor_imx072_data,
- },
-};
-#endif
-
-#ifdef CONFIG_WEBCAM_OV9726
-static struct msm_camera_sensor_platform_info ov9726_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_ov9726 = {
- .flash_type = MSM_CAMERA_FLASH_NONE,
- .flash_src = &msm_flash_src
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_ov9726_data = {
- .sensor_name = "ov9726",
- .sensor_reset_enable = 0,
- .sensor_reset = GPIO_CAM_GP_CAM1MP_XCLR,
- .sensor_pwd = 85,
- .vcm_pwd = 1,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data_front,
- .flash_data = &flash_ov9726,
- .sensor_platform_info = &ov9726_sensor_7627a_info,
- .csi_if = 1
-};
-
-static struct platform_device msm_camera_sensor_ov9726 = {
- .name = "msm_camera_ov9726",
- .dev = {
- .platform_data = &msm_camera_sensor_ov9726_data,
- },
-};
-#else
-static inline void msm_camera_vreg_init(void) { }
-#endif
-
-#ifdef CONFIG_MT9E013
-static struct msm_camera_sensor_platform_info mt9e013_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_mt9e013 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_mt9e013_data = {
- .sensor_name = "mt9e013",
- .sensor_reset = 0,
- .sensor_reset_enable = 1,
- .sensor_pwd = 85,
- .vcm_pwd = 1,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data_rear,
- .flash_data = &flash_mt9e013,
- .sensor_platform_info = &mt9e013_sensor_7627a_info,
- .csi_if = 1
-};
-
-static struct platform_device msm_camera_sensor_mt9e013 = {
- .name = "msm_camera_mt9e013",
- .dev = {
- .platform_data = &msm_camera_sensor_mt9e013_data,
- },
-};
-#endif
-
-static struct i2c_board_info i2c_camera_devices[] = {
- #ifdef CONFIG_S5K4E1
- {
- I2C_BOARD_INFO("s5k4e1", 0x36),
- },
- {
- I2C_BOARD_INFO("s5k4e1_af", 0x8c >> 1),
- },
- #endif
- #ifdef CONFIG_WEBCAM_OV9726
- {
- I2C_BOARD_INFO("ov9726", 0x10),
- },
- #endif
- #ifdef CONFIG_IMX072
- {
- I2C_BOARD_INFO("imx072", 0x34),
- },
- #endif
- #ifdef CONFIG_MT9E013
- {
- I2C_BOARD_INFO("mt9e013", 0x6C >> 2),
- },
- #endif
- {
- I2C_BOARD_INFO("sc628a", 0x6E),
- },
-};
-#endif
#if defined(CONFIG_SERIAL_MSM_HSL_CONSOLE) \
&& defined(CONFIG_MSM_SHARED_GPIO_FOR_UART2DM)
static struct msm_gpio uart2dm_gpios[] = {
@@ -1316,18 +967,6 @@
&lcdc_toshiba_panel_device,
&msm_batt_device,
&smsc911x_device,
-#ifdef CONFIG_S5K4E1
- &msm_camera_sensor_s5k4e1,
-#endif
-#ifdef CONFIG_IMX072
- &msm_camera_sensor_imx072,
-#endif
-#ifdef CONFIG_WEBCAM_OV9726
- &msm_camera_sensor_ov9726,
-#endif
-#ifdef CONFIG_MT9E013
- &msm_camera_sensor_mt9e013,
-#endif
#ifdef CONFIG_FB_MSM_MIPI_DSI
&mipi_dsi_renesas_panel_device,
#endif
@@ -2029,9 +1668,6 @@
#if defined(CONFIG_MSM_CAMERA)
msm_camera_vreg_init();
- i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
- i2c_camera_devices,
- ARRAY_SIZE(i2c_camera_devices));
#endif
platform_device_register(&kp_pdev);
platform_device_register(&hs_pdev);
diff --git a/arch/arm/mach-msm/board-qrd7627a.c b/arch/arm/mach-msm/board-qrd7627a.c
index 109d98d..f3efb3a 100644
--- a/arch/arm/mach-msm/board-qrd7627a.c
+++ b/arch/arm/mach-msm/board-qrd7627a.c
@@ -68,20 +68,6 @@
#define I2C_PIN_CTL 0x15
#define I2C_NORMAL 0x40
-enum {
- GPIO_HOST_VBUS_EN = 107,
- GPIO_BT_SYS_REST_EN = 114,
- GPIO_WAKE_ON_WIRELESS,
- GPIO_BACKLIGHT_EN,
- GPIO_NC,
- GPIO_CAM_3MP_PWDN, /* CAM_VGA */
- GPIO_WLAN_EN,
- GPIO_CAM_5MP_SHDN_EN,
- GPIO_CAM_5MP_RESET,
- GPIO_TP,
- GPIO_CAM_GP_CAMIF_RESET,
-};
-
static struct platform_device msm_wlan_ar6000_pm_device = {
.name = "wlan_ar6000_pm_dev",
.id = -1,
@@ -295,7 +281,7 @@
int rc = 0;
unsigned gpio;
- gpio = GPIO_HOST_VBUS_EN;
+ gpio = QRD_GPIO_HOST_VBUS_EN;
rc = gpio_request(gpio, "i2c_host_vbus_en");
if (rc < 0) {
@@ -518,7 +504,7 @@
static int mipi_truly_set_bl(int on)
{
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);
+ gpio_set_value_cansleep(QRD_GPIO_BACKLIGHT_EN, !!on);
return 1;
}
@@ -740,275 +726,6 @@
.dev.platform_data = &msm_psy_batt_data,
};
-#ifdef CONFIG_MSM_CAMERA
-static uint32_t camera_off_gpio_table[] = {
- GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static uint32_t camera_on_gpio_table[] = {
- GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static void qrd1_camera_gpio_cfg(void)
-{
-
- int rc = 0;
-
- rc = gpio_request(GPIO_CAM_5MP_SHDN_EN, "ov5640");
- if (rc < 0)
- pr_err("%s: gpio_request---GPIO_CAM_5MP_SHDN_EN failed!",
- __func__);
-
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_SHDN_EN, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable Power Down gpio for main"
- "camera!\n", __func__);
- gpio_free(GPIO_CAM_5MP_SHDN_EN);
- }
-
-
- rc = gpio_request(GPIO_CAM_5MP_RESET, "ov5640");
- if (rc < 0) {
- pr_err("%s: gpio_request---GPIO_CAM_5MP_RESET failed!",
- __func__);
- gpio_free(GPIO_CAM_5MP_SHDN_EN);
- }
-
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_RESET, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable reset gpio for main camera!\n",
- __func__);
- gpio_free(GPIO_CAM_5MP_RESET);
- }
-
- rc = gpio_request(GPIO_CAM_3MP_PWDN, "ov7692");
- if (rc < 0)
- pr_err("%s: gpio_request---GPIO_CAM_3MP_PWDN failed!",
- __func__);
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_3MP_PWDN, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable Power Down gpio for front"
- "camera!\n", __func__);
- gpio_free(GPIO_CAM_3MP_PWDN);
- }
-
- gpio_direction_output(GPIO_CAM_5MP_SHDN_EN, 1);
- gpio_direction_output(GPIO_CAM_5MP_RESET, 1);
- gpio_direction_output(GPIO_CAM_3MP_PWDN, 1);
-}
-
-#endif
-static struct regulator_bulk_data regs_camera[] = {
- { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
- { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
- { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 },
-};
-
-static void __init msm_camera_vreg_init(void)
-{
- int rc;
-
- rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
- if (rc) {
- pr_err("%s: could not get regulators: %d\n", __func__, rc);
- return;
- }
-
- rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
- if (rc) {
- pr_err("%s: could not set voltages: %d\n", __func__, rc);
- return;
- }
-}
-
-static void msm_camera_vreg_config(int vreg_en)
-{
- int rc = vreg_en ?
- regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) :
- regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera);
-
- if (rc)
- pr_err("%s: could not %sable regulators: %d\n",
- __func__, vreg_en ? "en" : "dis", rc);
-}
-static int config_gpio_table(uint32_t *table, int len)
-{
- int rc = 0, i = 0;
-
- for (i = 0; i < len; i++) {
- rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("%s not able to get gpio\n", __func__);
- for (i--; i >= 0; i--)
- gpio_tlmm_config(camera_off_gpio_table[i],
- GPIO_CFG_ENABLE);
- break;
- }
- }
- return rc;
-}
-
-static int config_camera_on_gpios_rear(void)
-{
- int rc = 0;
-
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_rear(void)
-{
- msm_camera_vreg_config(0);
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-static int config_camera_on_gpios_front(void)
-{
- int rc = 0;
-
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_front(void)
-{
- msm_camera_vreg_config(0);
-
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-struct msm_camera_device_platform_data msm_camera_data_rear = {
- .camera_gpio_on = config_camera_on_gpios_rear,
- .camera_gpio_off = config_camera_off_gpios_rear,
- .ioext.csiphy = 0xA1000000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_1,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-struct msm_camera_device_platform_data msm_camera_data_front = {
- .camera_gpio_on = config_camera_on_gpios_front,
- .camera_gpio_off = config_camera_off_gpios_front,
- .ioext.csiphy = 0xA0F00000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_0,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-#ifdef CONFIG_OV5640
-static struct msm_camera_sensor_platform_info ov5640_sensor_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_src msm_flash_src_ov5640 = {
- .flash_sr_type = MSM_CAMERA_FLASH_SRC_LED,
- ._fsrc.led_src.led_name = "flashlight",
- ._fsrc.led_src.led_name_len = 10,
-};
-
-static struct msm_camera_sensor_flash_data flash_ov5640 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src_ov5640,
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_ov5640_data = {
- .sensor_name = "ov5640",
- .sensor_reset_enable = 1,
- .sensor_reset = GPIO_CAM_5MP_RESET,
- .sensor_pwd = GPIO_CAM_5MP_SHDN_EN,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_data_rear,
- .flash_data = &flash_ov5640,
- .sensor_platform_info = &ov5640_sensor_info,
- .csi_if = 1,
-};
-
-static struct platform_device msm_camera_sensor_ov5640 = {
- .name = "msm_camera_ov5640",
- .dev = {
- .platform_data = &msm_camera_sensor_ov5640_data,
- },
-};
-#endif
-
-#ifdef CONFIG_WEBCAM_OV7692_QRD
-static struct msm_camera_sensor_platform_info ov7692_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_ov7692 = {
- .flash_type = MSM_CAMERA_FLASH_NONE,
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_ov7692_data = {
- .sensor_name = "ov7692",
- .sensor_reset_enable = 0,
- .sensor_reset = 0,
- .sensor_pwd = GPIO_CAM_3MP_PWDN,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_data_front,
- .flash_data = &flash_ov7692,
- .sensor_platform_info = &ov7692_sensor_7627a_info,
- .csi_if = 1,
-};
-
-static struct platform_device msm_camera_sensor_ov7692 = {
- .name = "msm_camera_ov7692",
- .dev = {
- .platform_data = &msm_camera_sensor_ov7692_data,
- },
-};
-#endif
-
-static struct i2c_board_info i2c_camera_devices[] = {
- #ifdef CONFIG_OV5640
- {
- I2C_BOARD_INFO("ov5640", 0x78 >> 1),
- },
- #endif
- #ifdef CONFIG_WEBCAM_OV7692_QRD
- {
- I2C_BOARD_INFO("ov7692", 0x78),
- },
- #endif
-};
static struct platform_device *qrd1_devices[] __initdata = {
&msm_device_dmov,
&msm_device_smd,
@@ -1026,12 +743,6 @@
&msm_device_snd,
&msm_device_adspdec,
&msm_batt_device,
-#ifdef CONFIG_OV5640
- &msm_camera_sensor_ov5640,
-#endif
-#ifdef CONFIG_WEBCAM_OV7692_QRD
- &msm_camera_sensor_ov7692,
-#endif
&msm_kgsl_3d0,
#ifdef CONFIG_BT
&msm_bt_power_device,
@@ -1184,11 +895,11 @@
int rc = 0;
if (!dsi_gpio_initialized) {
- rc = gpio_request(GPIO_BACKLIGHT_EN, "gpio_bkl_en");
+ rc = gpio_request(QRD_GPIO_BACKLIGHT_EN, "gpio_bkl_en");
if (rc < 0)
return rc;
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_BACKLIGHT_EN, 0,
+ rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_BACKLIGHT_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
@@ -1196,16 +907,16 @@
return rc;
}
- rc = gpio_direction_output(GPIO_BACKLIGHT_EN, 1);
+ rc = gpio_direction_output(QRD_GPIO_BACKLIGHT_EN, 1);
if (rc < 0) {
pr_err("failed to enable backlight\n");
- gpio_free(GPIO_BACKLIGHT_EN);
+ gpio_free(QRD_GPIO_BACKLIGHT_EN);
return rc;
}
dsi_gpio_initialized = 1;
}
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);
+ gpio_set_value_cansleep(QRD_GPIO_BACKLIGHT_EN, !!on);
if (!on) {
gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 1);
@@ -1363,8 +1074,6 @@
#endif
msm_camera_vreg_init();
- i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, i2c_camera_devices,
- ARRAY_SIZE(i2c_camera_devices));
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)