Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
blackfin: bf561: add adv7183 capture support
blackfin: bf537: add capture support
blackfin: bf548: add capture support
blackfin: time-ts: rm unused func broadcast_timer_setup()
blackfin: i2c-lcd: change default clock rate
blackfin: mac: dsa: add vlan mask in board file
blackfin: bf537: change num_chipselect for spi-sport
blackfin: serial: bfin-uart: remove unused field
bf54x: get mem size: missing break in switch
blackfin: smp: fix msg queue overflow issue
blackfin: config: update macro SPI_BFIN in board file
blackfin: config: update def config for all boards
blackfin: smp: cleanup smp code
blackfin: smp: add suspend and wakeup irq flags
blackfin: bf533-stamp: add missed patches for new asoc driver
blackfin: bf533-stamp: fix ad1836 name
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 5edcb58..0b7039c 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -80,7 +80,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 2e54957..5553205 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -97,7 +97,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
index ad0881b..d95658f 100644
--- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -68,7 +68,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=400
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
index 8465b3e..498f64a 100644
--- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -105,7 +105,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e7321b..72e0317 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -99,7 +99,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index a7eb54b..2f075e0 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -81,7 +81,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index b90d379..ab38a82 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -84,7 +84,7 @@
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 0053625..5c802d6 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -94,7 +94,7 @@
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 580bf42..972aa62 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -101,7 +101,7 @@
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0e6d841..7a1e3bf 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -113,7 +113,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index 77a27e3..0fdc4ec 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -85,7 +85,7 @@
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
index f5ed34e..78adbbf 100644
--- a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig
@@ -84,7 +84,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index d7ff2ae..d3cd0f5 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -86,7 +86,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 8501431..7b982d0 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -80,7 +80,7 @@
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_SPI_SPIDEV=m
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index dbf750c..c280a50 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -88,7 +88,7 @@
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 07ffbda..c940a1e 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -57,7 +57,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 707cbf8..2e47df7 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -78,7 +78,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_USB_GADGET=m
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 4596935..6da629f 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -72,7 +72,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_USB_GADGET=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 9f1d084..349922b 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -89,7 +89,7 @@
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 6c7b215..0456dea 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -78,7 +78,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_USB_GADGET=m
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig
index b192acf..89162d0 100644
--- a/arch/blackfin/configs/DNP5370_defconfig
+++ b/arch/blackfin/configs/DNP5370_defconfig
@@ -78,7 +78,7 @@
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 06e9f49..a26436b 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -68,7 +68,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_SPI_SPIDEV=y
CONFIG_WATCHDOG=y
CONFIG_SOUND=m
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 5e797cf..6479915 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -70,7 +70,7 @@
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_USB=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index a566a2f..8fd9b44 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -84,7 +84,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 12e66cd..0520c16 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -71,7 +71,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_HWMON=m
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
index d496ae9..e4ed865 100644
--- a/arch/blackfin/configs/TCM-BF518_defconfig
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -92,7 +92,7 @@
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 65f6421..c1f45f1 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -70,7 +70,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
-CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN5XX=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index ecacdf3..68bcc3d 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -51,9 +51,6 @@
#elif ANOMALY_05000363
unsigned int anomaly_threshold;
#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- int scts;
-#endif
#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
int cts_pin;
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 0504378..e349631 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -14,6 +14,9 @@
struct cpu cpu;
unsigned int imemctl;
unsigned int dmemctl;
+#ifdef CONFIG_SMP
+ struct task_struct *idle;
+#endif
};
DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index af6c0aa..dc3d144 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -37,7 +37,7 @@
#endif
void smp_icache_flush_range_others(unsigned long start,
- unsigned long end);
+ unsigned long end);
#ifdef CONFIG_HOTPLUG_CPU
void coreb_die(void);
void cpu_die(void);
@@ -46,4 +46,7 @@
int __cpu_die(unsigned int cpu);
#endif
+void smp_timer_broadcast(const struct cpumask *mask);
+
+
#endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index dfa2525..d6102c8 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -828,10 +828,18 @@
u32 ddrctl = bfin_read_EBIU_DDRCTL1();
int ret = 0;
switch (ddrctl & 0xc0000) {
- case DEVSZ_64: ret = 64 / 8;
- case DEVSZ_128: ret = 128 / 8;
- case DEVSZ_256: ret = 256 / 8;
- case DEVSZ_512: ret = 512 / 8;
+ case DEVSZ_64:
+ ret = 64 / 8;
+ break;
+ case DEVSZ_128:
+ ret = 128 / 8;
+ break;
+ case DEVSZ_256:
+ ret = 256 / 8;
+ break;
+ case DEVSZ_512:
+ ret = 512 / 8;
+ break;
}
switch (ddrctl & 0x30000) {
case DEVWD_4: ret *= 2;
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 1bcf3a3..d98f2d6 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -219,7 +219,7 @@
#if defined(CONFIG_TICKSOURCE_CORETMR)
/* per-cpu local core timer */
-static DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
+DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
static int bfin_coretmr_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
@@ -281,6 +281,7 @@
#ifdef CONFIG_CORE_TIMER_IRQ_L1
__attribute__((l1_text))
#endif
+
irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
{
int cpu = smp_processor_id();
@@ -306,6 +307,11 @@
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+#ifdef CONFIG_SMP
+ evt->broadcast = smp_timer_broadcast;
+#endif
+
+
evt->name = "bfin_core_timer";
evt->rating = 350;
evt->irq = -1;
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d1c0c0c..a2d96d3 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -61,7 +61,7 @@
static struct resource ezbrd_flash_resource = {
.start = 0x20000000,
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
.end = 0x202fffff,
#else
.end = 0x203fffff,
@@ -122,6 +122,8 @@
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
#endif
+ .vlan1_mask = 1,
+ .vlan2_mask = 2,
};
static struct platform_device bfin_mii_bus = {
@@ -292,7 +294,7 @@
};
/* SPI controller data */
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
@@ -715,7 +717,7 @@
#endif
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
@@ -777,7 +779,7 @@
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
peripheral_request(P_AMS2, "ParaFlash");
-#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE)
peripheral_request(P_AMS3, "ParaFlash");
#endif
return 0;
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index 5470bf8..f271310 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -228,7 +228,7 @@
};
/* SPI controller data */
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
@@ -635,7 +635,7 @@
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index 5bc6938..c8d5d2b 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -334,7 +334,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -744,7 +744,7 @@
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index cd28969..7330607 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -444,7 +444,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -893,7 +893,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9f792ea..db3ecfc 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -371,7 +371,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -776,7 +776,7 @@
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3ecafff..dfdd8e6 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -664,7 +664,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -1189,7 +1189,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index 3a92c43..360e97f 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -448,7 +448,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
@@ -831,7 +831,7 @@
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 47cadd3..6cb7b3e 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -125,7 +125,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -398,7 +398,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -428,7 +428,7 @@
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 18817d5..de44a37 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -146,7 +146,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -422,7 +422,7 @@
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 2c8f30e..fe47e04 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF533";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -536,7 +536,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -549,7 +549,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 144556e..07811c2 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -245,7 +245,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -484,7 +484,7 @@
&smc91x_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index b597d4e..e303dae 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -104,7 +104,7 @@
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
@@ -270,7 +270,7 @@
#endif
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&spi_bfin_master_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 2afd02e..ce88a71 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -219,9 +219,10 @@
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
+ defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
{
- .modalias = "ad183x",
+ .modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
@@ -251,7 +252,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -471,7 +472,7 @@
.scl_pin = GPIO_PF3,
.sda_is_open_drain = 0,
.scl_is_open_drain = 0,
- .udelay = 40,
+ .udelay = 10,
};
static struct platform_device i2c_gpio_device = {
@@ -540,27 +541,150 @@
},
};
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
+ defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \
+ || defined(CONFIG_SND_BF5XX_AC97) || \
+ defined(CONFIG_SND_BF5XX_AC97_MODULE)
+
+#include <asm/bfin_sport.h>
+
+#define SPORT_REQ(x) \
+ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+ P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+ SPORT_REQ(0),
+ SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+ {
+ .pin_req = &bfin_snd_pin[0][0],
+ },
+ {
+ .pin_req = &bfin_snd_pin[1][0],
+ },
+};
+
+#define BFIN_SND_RES(x) \
+ [x] = { \
+ { \
+ .start = SPORT##x##_TCR1, \
+ .end = SPORT##x##_TCR1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ { \
+ .start = CH_SPORT##x##_RX, \
+ .end = CH_SPORT##x##_RX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = CH_SPORT##x##_TX, \
+ .end = CH_SPORT##x##_TX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = IRQ_SPORT##x##_ERROR, \
+ .end = IRQ_SPORT##x##_ERROR, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+ }
+
+static struct resource bfin_snd_resources[][4] = {
+ BFIN_SND_RES(0),
+ BFIN_SND_RES(1),
+};
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
-static struct platform_device bfin_i2s = {
- .name = "bfin-i2s",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+static struct platform_device bfin_i2s_pcm = {
+ .name = "bfin-i2s-pcm-audio",
+ .id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
- .name = "bfin-tdm",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+static struct platform_device bfin_tdm_pcm = {
+ .name = "bfin-tdm-pcm-audio",
+ .id = -1,
};
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97_pcm = {
+ .name = "bfin-ac97-pcm-audio",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+static const unsigned ad73311_gpio[] = {
+ GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+ .name = "bfin-snd-ad73311",
+ .id = 1,
+ .dev = {
+ .platform_data = (void *)ad73311_gpio,
+ },
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+static struct platform_device bfin_ad73311_codec_device = {
+ .name = "ad73311",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+static struct platform_device bfin_ad74111_codec_device = {
+ .name = "ad74111",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+ defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+ .name = "bfin-i2s",
+ .id = CONFIG_SND_BF5XX_SPORT_NUM,
+ .num_resources =
+ ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+ defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+ .name = "bfin-tdm",
+ .id = CONFIG_SND_BF5XX_SPORT_NUM,
+ .num_resources =
+ ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+ defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+ .num_resources =
+ ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
};
#endif
@@ -580,7 +704,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -596,7 +720,8 @@
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
+ defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
@@ -618,14 +743,42 @@
#endif
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
- &bfin_i2s,
+ &bfin_i2s_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
- &bfin_tdm,
+ &bfin_tdm_pcm,
#endif
#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+ &bfin_ac97_pcm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+ &bfin_ad73311_machine,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+ &bfin_ad73311_codec_device,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+ &bfin_ad74111_codec_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+ defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+ &bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+ defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
+ &bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+ defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
&bfin_ac97,
#endif
};
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 604a430..0d4a2f6 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -31,7 +31,7 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF537E";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -735,7 +735,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -770,7 +770,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index d916b46..f553698 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -32,7 +32,7 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF537U";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -700,7 +700,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -747,7 +747,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c
index 5f30722..11dadeb 100644
--- a/arch/blackfin/mach-bf537/boards/dnp5370.c
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -125,7 +125,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
@@ -370,7 +370,7 @@
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&spi_bfin_master_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 3901dd0..d2d7128 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -121,7 +121,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
@@ -496,7 +496,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -537,7 +537,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index aebd31c..6fd8470 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -154,7 +154,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
@@ -477,7 +477,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -508,7 +508,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 7fbb0bb..2221173 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1420,7 +1420,7 @@
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -1462,7 +1462,7 @@
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
- .num_chipselect = 1, /* master only supports one device */
+ .num_chipselect = MAX_BLACKFIN_GPIOS,
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
@@ -1492,7 +1492,7 @@
};
static struct bfin5xx_spi_master bfin_sport_spi1_info = {
- .num_chipselect = 1, /* master only supports one device */
+ .num_chipselect = MAX_BLACKFIN_GPIOS,
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
@@ -1558,6 +1558,71 @@
};
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_PPI,
+ .dma_ch = CH_PPI,
+ .irq_err = IRQ_PPI_ERROR,
+ .base = (void __iomem *)PPI_CONTROL,
+ .pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+ || defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+ {
+ .index = 0,
+ .name = "Camera",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_UNKNOWN,
+ },
+};
+
+static struct bcap_route vs6624_routes[] = {
+ {
+ .input = 0,
+ .output = 0,
+ },
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PF10;
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF537",
+ .inputs = vs6624_inputs,
+ .num_inputs = ARRAY_SIZE(vs6624_inputs),
+ .routes = vs6624_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "vs6624",
+ .addr = 0x10,
+ .platform_data = (void *)&vs6624_ce_pin,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
@@ -2716,7 +2781,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -2733,6 +2798,11 @@
&bfin_lq035q1_device,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+ &bfin_capture_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 6917ce2..9885176 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -32,7 +32,7 @@
*/
const char bfin_board_name[] = "Bluetechnix TCM BF537";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -702,7 +702,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -737,7 +737,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 8356eb5..1633a6f 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -490,7 +490,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -874,7 +874,7 @@
#endif
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bf538_spi_master0,
&bf538_spi_master1,
&bf538_spi_master2,
@@ -938,7 +938,7 @@
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bf538_spi_board_info,
ARRAY_SIZE(bf538_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 0350eac..68af594 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -854,7 +854,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -1175,7 +1175,7 @@
&bf54x_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
@@ -1210,7 +1210,7 @@
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bf54x_spi_board_info,
ARRAY_SIZE(bf54x_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index bb868ac..3ea45f8 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -1110,7 +1110,7 @@
},
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -1183,6 +1183,71 @@
};
#endif /* spi master and devices */
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+ P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+ P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_EPPI,
+ .dma_ch = CH_EPPI1,
+ .irq_err = IRQ_EPPI1_ERROR,
+ .base = (void __iomem *)EPPI1_STATUS,
+ .pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+ || defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+ {
+ .index = 0,
+ .name = "Camera",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_UNKNOWN,
+ },
+};
+
+static struct bcap_route vs6624_routes[] = {
+ {
+ .input = 0,
+ .output = 0,
+ },
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PG6;
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF548",
+ .inputs = vs6624_inputs,
+ .num_inputs = ARRAY_SIZE(vs6624_inputs),
+ .routes = vs6624_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "vs6624",
+ .addr = 0x10,
+ .platform_data = (void *)&vs6624_ce_pin,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
+};
+#endif
+
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
[0] = {
@@ -1502,10 +1567,14 @@
&bf54x_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+ &bfin_capture_device,
+#endif
#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
&bf54x_kpad_device,
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index b1b7339..f6ffd6f 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -372,7 +372,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -475,7 +475,7 @@
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c017cf0..d81450f 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
@@ -488,7 +488,7 @@
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -523,7 +523,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 27f22ed..8389788 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -291,7 +291,7 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -383,7 +383,7 @@
.scl_pin = GPIO_PF0,
.sda_is_open_drain = 0,
.scl_is_open_drain = 0,
- .udelay = 40,
+ .udelay = 10,
};
static struct platform_device i2c_gpio_device = {
@@ -422,6 +422,96 @@
},
};
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_PPI,
+ .dma_ch = CH_PPI0,
+ .irq_err = IRQ_PPI1_ERROR,
+ .base = (void __iomem *)PPI0_CONTROL,
+ .pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_ADV7183) \
+ || defined(CONFIG_VIDEO_ADV7183_MODULE)
+#include <media/adv7183.h>
+static struct v4l2_input adv7183_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ },
+};
+
+static struct bcap_route adv7183_routes[] = {
+ {
+ .input = ADV7183_COMPOSITE4,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_SVIDEO0,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_COMPONENT0,
+ .output = ADV7183_8BIT_OUT,
+ },
+};
+
+
+static const unsigned adv7183_gpio[] = {
+ GPIO_PF13, /* reset pin */
+ GPIO_PF2, /* output enable pin */
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF561",
+ .inputs = adv7183_inputs,
+ .num_inputs = ARRAY_SIZE(adv7183_inputs),
+ .routes = adv7183_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7183",
+ .addr = 0x20,
+ .platform_data = (void *)adv7183_gpio,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
+};
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
@@ -462,7 +552,7 @@
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
@@ -494,6 +584,11 @@
&ezkit_flash_device,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+ &bfin_capture_device,
+#endif
+
#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
&bfin_i2s,
#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h
index 7977db2..00bdace 100644
--- a/arch/blackfin/mach-bf561/include/mach/pll.h
+++ b/arch/blackfin/mach-bf561/include/mach/pll.h
@@ -16,6 +16,7 @@
#include <mach/irq.h>
#define SUPPLE_0_WAKEUP ((IRQ_SUPPLE_0 - (IRQ_CORETMR + 1)) % 32)
+#define SUPPLE_1_WAKEUP ((IRQ_SUPPLE_1 - (IRQ_CORETMR + 1)) % 32)
static inline void
bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2)
@@ -42,7 +43,8 @@
static inline void
bfin_iwr_set_sup0(unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2)
{
- bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP), 0, iwr0, iwr1, iwr2);
+ bfin_iwr_save(0, IWR_ENABLE(SUPPLE_0_WAKEUP) |
+ IWR_ENABLE(SUPPLE_1_WAKEUP), 0, iwr0, iwr1, iwr2);
}
#endif
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index db22401..ab1c617 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -84,7 +84,7 @@
if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) {
/* CoreB already running, sending ipi to wakeup it */
- platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+ smp_send_reschedule(cpu);
} else {
/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT);
@@ -114,7 +114,8 @@
int ret;
const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1;
- ret = request_irq(irq, handler, IRQF_PERCPU, name, handler);
+ ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND |
+ IRQF_FORCE_RESUME, name, handler);
if (ret)
panic("Cannot request %s for IPI service", name);
}
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 0784a52..ac8f8a4 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/cache.h>
+#include <linux/clockchips.h>
#include <linux/profile.h>
#include <linux/errno.h>
#include <linux/mm.h>
@@ -47,9 +48,10 @@
struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
-#define BFIN_IPI_RESCHEDULE 0
-#define BFIN_IPI_CALL_FUNC 1
-#define BFIN_IPI_CPU_STOP 2
+#define BFIN_IPI_TIMER 0
+#define BFIN_IPI_RESCHEDULE 1
+#define BFIN_IPI_CALL_FUNC 2
+#define BFIN_IPI_CPU_STOP 3
struct blackfin_flush_data {
unsigned long start;
@@ -160,6 +162,14 @@
return IRQ_HANDLED;
}
+DECLARE_PER_CPU(struct clock_event_device, coretmr_events);
+void ipi_timer(void)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+ evt->event_handler(evt);
+}
+
static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
{
struct ipi_message *msg;
@@ -176,18 +186,17 @@
while (msg_queue->count) {
msg = &msg_queue->ipi_message[msg_queue->head];
switch (msg->type) {
+ case BFIN_IPI_TIMER:
+ ipi_timer();
+ break;
case BFIN_IPI_RESCHEDULE:
scheduler_ipi();
break;
case BFIN_IPI_CALL_FUNC:
- spin_unlock_irqrestore(&msg_queue->lock, flags);
ipi_call_function(cpu, msg);
- spin_lock_irqsave(&msg_queue->lock, flags);
break;
case BFIN_IPI_CPU_STOP:
- spin_unlock_irqrestore(&msg_queue->lock, flags);
ipi_cpu_stop(cpu);
- spin_lock_irqsave(&msg_queue->lock, flags);
break;
default:
printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
@@ -297,8 +306,6 @@
{
cpumask_t callmap;
/* simply trigger an ipi */
- if (cpu_is_offline(cpu))
- return;
cpumask_clear(&callmap);
cpumask_set_cpu(cpu, &callmap);
@@ -308,6 +315,16 @@
return;
}
+void smp_send_msg(const struct cpumask *mask, unsigned long type)
+{
+ smp_send_message(*mask, type, NULL, NULL, 0);
+}
+
+void smp_timer_broadcast(const struct cpumask *mask)
+{
+ smp_send_msg(mask, BFIN_IPI_TIMER);
+}
+
void smp_send_stop(void)
{
cpumask_t callmap;
@@ -326,17 +343,24 @@
int __cpuinit __cpu_up(unsigned int cpu)
{
int ret;
- static struct task_struct *idle;
+ struct blackfin_cpudata *ci = &per_cpu(cpu_data, cpu);
+ struct task_struct *idle = ci->idle;
- if (idle)
+ if (idle) {
free_task(idle);
-
- idle = fork_idle(cpu);
- if (IS_ERR(idle)) {
- printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
- return PTR_ERR(idle);
+ idle = NULL;
}
+ if (!idle) {
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle)) {
+ printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
+ return PTR_ERR(idle);
+ }
+ ci->idle = idle;
+ } else {
+ init_idle(idle, cpu);
+ }
secondary_stack = task_stack_page(idle) + THREAD_SIZE;
ret = platform_boot_secondary(cpu, idle);
@@ -411,6 +435,7 @@
bfin_setup_caches(cpu);
+ notify_cpu_starting(cpu);
/*
* Calibrate loops per jiffy value.
* IRQs need to be enabled here - D-cache can be invalidated
@@ -453,8 +478,10 @@
smp_flush_data.start = start;
smp_flush_data.end = end;
- if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
+ preempt_disable();
+ if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);