rapidio: fix use of non-compatible registers
Replace/remove use of RIO v.1.2 registers/bits that are not
forward-compatible with newer versions of RapidIO specification.
RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR,
Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR.
Use of removed (since RIO v.1.3) register bits affects users of
currently available 1.3 and 2.x compliant devices who may use not so
recent kernel versions.
Removing checks for unsupported bits makes corresponding routines
compatible with all versions of RapidIO specification. Therefore,
backporting makes stable kernel versions compliant with RIO v.1.3 and
later as well.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 86ac38c..3bb1311 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -80,13 +80,13 @@
*/
static struct rio_dev **rionet_active;
-#define is_rionet_capable(pef, src_ops, dst_ops) \
- ((pef & RIO_PEF_INB_MBOX) && \
- (pef & RIO_PEF_INB_DOORBELL) && \
+#define is_rionet_capable(src_ops, dst_ops) \
+ ((src_ops & RIO_SRC_OPS_DATA_MSG) && \
+ (dst_ops & RIO_DST_OPS_DATA_MSG) && \
(src_ops & RIO_SRC_OPS_DOORBELL) && \
(dst_ops & RIO_DST_OPS_DOORBELL))
#define dev_rionet_capable(dev) \
- is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops)
+ is_rionet_capable(dev->src_ops, dev->dst_ops)
#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
@@ -282,7 +282,6 @@
{
int i, rc = 0;
struct rionet_peer *peer, *tmp;
- u32 pwdcsr;
struct rionet_private *rnet = netdev_priv(ndev);
if (netif_msg_ifup(rnet))
@@ -332,13 +331,8 @@
continue;
}
- /*
- * If device has initialized inbound doorbells,
- * send a join message
- */
- rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr);
- if (pwdcsr & RIO_DOORBELL_AVAIL)
- rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
+ /* Send a join message */
+ rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
}
out:
@@ -492,7 +486,7 @@
static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
int rc = -ENODEV;
- u32 lpef, lsrc_ops, ldst_ops;
+ u32 lsrc_ops, ldst_ops;
struct rionet_peer *peer;
struct net_device *ndev = NULL;
@@ -515,12 +509,11 @@
* on later probes
*/
if (!rionet_check) {
- rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef);
rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR,
&lsrc_ops);
rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR,
&ldst_ops);
- if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) {
+ if (!is_rionet_capable(lsrc_ops, ldst_ops)) {
printk(KERN_ERR
"%s: local device is not network capable\n",
DRV_NAME);
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index ee89358..ebe77dd 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -505,8 +505,7 @@
rdev->dev.dma_mask = &rdev->dma_mask;
rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- if ((rdev->pef & RIO_PEF_INB_DOORBELL) &&
- (rdev->dst_ops & RIO_DST_OPS_DOORBELL))
+ if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
0, 0xffff);
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 9026b30..218168a 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -36,12 +36,12 @@
#define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */
#define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */
#define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */
-#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */
-#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */
-#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */
-#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
-#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
-#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */
+#define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */
+#define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */
+#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */
+#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */
+#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */
#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
@@ -102,7 +102,7 @@
#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
#define RIO_RT_MAX_DESTID 0x0000ffff
-#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
+#define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
#define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */
#define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */
@@ -128,8 +128,8 @@
#define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */
#define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */
-#define RIO_WRITE_PORT_CSR 0x44 /* [I] Write Port CSR */
-#define RIO_DOORBELL_CSR 0x44 /* [II] Doorbell CSR */
+#define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */
+#define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */
#define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */
#define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */
#define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */