iwlwifi: move scan to iwl-scan.c iwlcore
This patch moves scan code to iwl-scan.c file in iwlcore module.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index b58f796..058e764 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2100,7 +2100,7 @@
*****************************************************************************/
/**
- * struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table
+ * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
*
* One for each channel in the scan list.
* Each channel can independently select:
@@ -2110,7 +2110,7 @@
* quiet_plcp_th, good_CRC_th)
*
* To avoid uCode errors, make sure the following are true (see comments
- * under struct iwl4965_scan_cmd about max_out_time and quiet_time):
+ * under struct iwl_scan_cmd about max_out_time and quiet_time):
* 1) If using passive_dwell (i.e. passive_dwell != 0):
* active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
* 2) quiet_time <= active_dwell
@@ -2118,7 +2118,7 @@
* passive_dwell < max_out_time
* active_dwell < max_out_time
*/
-struct iwl4965_scan_channel {
+struct iwl_scan_channel {
/*
* type is defined as:
* 0:0 1 = active, 0 = passive
@@ -2134,13 +2134,13 @@
} __attribute__ ((packed));
/**
- * struct iwl4965_ssid_ie - directed scan network information element
+ * struct iwl_ssid_ie - directed scan network information element
*
* Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
* in struct iwl4965_scan_channel; each channel may select different ssids from
* among the 4 entries. SSID IEs get transmitted in reverse order of entry.
*/
-struct iwl4965_ssid_ie {
+struct iwl_ssid_ie {
u8 id;
u8 len;
u8 ssid[32];
@@ -2201,9 +2201,9 @@
* Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
*
* To avoid uCode errors, see timing restrictions described under
- * struct iwl4965_scan_channel.
+ * struct iwl_scan_channel.
*/
-struct iwl4965_scan_cmd {
+struct iwl_scan_cmd {
__le16 len;
u8 reserved0;
u8 channel_count; /* # channels in channel list */
@@ -2227,7 +2227,7 @@
struct iwl_tx_cmd tx_cmd;
/* For directed active scans (set to all-0s otherwise) */
- struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX];
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
/*
* Probe request frame, followed by channel list.
@@ -2255,14 +2255,14 @@
/*
* REPLY_SCAN_CMD = 0x80 (response)
*/
-struct iwl4965_scanreq_notification {
+struct iwl_scanreq_notification {
__le32 status; /* 1: okay, 2: cannot fulfill request */
} __attribute__ ((packed));
/*
* SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
*/
-struct iwl4965_scanstart_notification {
+struct iwl_scanstart_notification {
__le32 tsf_low;
__le32 tsf_high;
__le32 beacon_timer;
@@ -2279,7 +2279,7 @@
/*
* SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
*/
-struct iwl4965_scanresults_notification {
+struct iwl_scanresults_notification {
u8 channel;
u8 band;
u8 reserved[2];
@@ -2291,7 +2291,7 @@
/*
* SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
*/
-struct iwl4965_scancomplete_notification {
+struct iwl_scancomplete_notification {
u8 scanned_channels;
u8 status;
u8 reserved;