net/irda: sh_sir: Add SuperH IrDA driver
This is very simple IrDA SIR driver for SuperH.
This driver was tested by irdaping/ircp on SH7724 EcoVec24 board
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index f763842..af10e97 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -64,6 +64,16 @@
comment "Dongle support"
+config SH_SIR
+ tristate "SuperH SIR on UART"
+ depends on IRDA && SUPERH && \
+ (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
+ CPU_SUBTYPE_SH7724)
+ default n
+ help
+ Say Y here if your want to enable SIR function on SuperH UART
+ devices.
+
config DONGLE
bool "Serial dongle support"
depends on IRTTY_SIR
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index d82e1e3..e030d47 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -22,6 +22,7 @@
# SIR drivers
obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
obj-$(CONFIG_BFIN_SIR) += bfin_sir.o
+obj-$(CONFIG_SH_SIR) += sh_sir.o
# dongle drivers for SIR drivers
obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
new file mode 100644
index 0000000..d7c983d
--- /dev/null
+++ b/drivers/net/irda/sh_sir.c
@@ -0,0 +1,823 @@
+/*
+ * SuperH IrDA Driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on bfin_sir.c
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+#include <asm/clock.h>
+
+#define DRIVER_NAME "sh_sir"
+
+#define RX_PHASE (1 << 0)
+#define TX_PHASE (1 << 1)
+#define TX_COMP_PHASE (1 << 2) /* tx complete */
+#define NONE_PHASE (1 << 31)
+
+#define IRIF_RINTCLR 0x0016 /* DMA rx interrupt source clear */
+#define IRIF_TINTCLR 0x0018 /* DMA tx interrupt source clear */
+#define IRIF_SIR0 0x0020 /* IrDA-SIR10 control */
+#define IRIF_SIR1 0x0022 /* IrDA-SIR10 baudrate error correction */
+#define IRIF_SIR2 0x0024 /* IrDA-SIR10 baudrate count */
+#define IRIF_SIR3 0x0026 /* IrDA-SIR10 status */
+#define IRIF_SIR_FRM 0x0028 /* Hardware frame processing set */
+#define IRIF_SIR_EOF 0x002A /* EOF value */
+#define IRIF_SIR_FLG 0x002C /* Flag clear */
+#define IRIF_UART_STS2 0x002E /* UART status 2 */
+#define IRIF_UART0 0x0030 /* UART control */
+#define IRIF_UART1 0x0032 /* UART status */
+#define IRIF_UART2 0x0034 /* UART mode */
+#define IRIF_UART3 0x0036 /* UART transmit data */
+#define IRIF_UART4 0x0038 /* UART receive data */
+#define IRIF_UART5 0x003A /* UART interrupt mask */
+#define IRIF_UART6 0x003C /* UART baud rate error correction */
+#define IRIF_UART7 0x003E /* UART baud rate count set */
+#define IRIF_CRC0 0x0040 /* CRC engine control */
+#define IRIF_CRC1 0x0042 /* CRC engine input data */
+#define IRIF_CRC2 0x0044 /* CRC engine calculation */
+#define IRIF_CRC3 0x0046 /* CRC engine output data 1 */
+#define IRIF_CRC4 0x0048 /* CRC engine output data 2 */
+
+/* IRIF_SIR0 */
+#define IRTPW (1 << 1) /* transmit pulse width select */
+#define IRERRC (1 << 0) /* Clear receive pulse width error */
+
+/* IRIF_SIR3 */
+#define IRERR (1 << 0) /* received pulse width Error */
+
+/* IRIF_SIR_FRM */
+#define EOFD (1 << 9) /* EOF detection flag */
+#define FRER (1 << 8) /* Frame Error bit */
+#define FRP (1 << 0) /* Frame processing set */
+
+/* IRIF_UART_STS2 */
+#define IRSME (1 << 6) /* Receive Sum Error flag */
+#define IROVE (1 << 5) /* Receive Overrun Error flag */
+#define IRFRE (1 << 4) /* Receive Framing Error flag */
+#define IRPRE (1 << 3) /* Receive Parity Error flag */
+
+/* IRIF_UART0_*/
+#define TBEC (1 << 2) /* Transmit Data Clear */
+#define RIE (1 << 1) /* Receive Enable */
+#define TIE (1 << 0) /* Transmit Enable */
+
+/* IRIF_UART1 */
+#define URSME (1 << 6) /* Receive Sum Error Flag */
+#define UROVE (1 << 5) /* Receive Overrun Error Flag */
+#define URFRE (1 << 4) /* Receive Framing Error Flag */
+#define URPRE (1 << 3) /* Receive Parity Error Flag */
+#define RBF (1 << 2) /* Receive Buffer Full Flag */
+#define TSBE (1 << 1) /* Transmit Shift Buffer Empty Flag */
+#define TBE (1 << 0) /* Transmit Buffer Empty flag */
+#define TBCOMP (TSBE | TBE)
+
+/* IRIF_UART5 */
+#define RSEIM (1 << 6) /* Receive Sum Error Flag IRQ Mask */
+#define RBFIM (1 << 2) /* Receive Buffer Full Flag IRQ Mask */
+#define TSBEIM (1 << 1) /* Transmit Shift Buffer Empty Flag IRQ Mask */
+#define TBEIM (1 << 0) /* Transmit Buffer Empty Flag IRQ Mask */
+#define RX_MASK (RSEIM | RBFIM)
+
+/* IRIF_CRC0 */
+#define CRC_RST (1 << 15) /* CRC Engine Reset */
+#define CRC_CT_MASK 0x0FFF
+
+/************************************************************************
+
+
+ structure
+
+
+************************************************************************/
+struct sh_sir_self {
+ void __iomem *membase;
+ unsigned int irq;
+ struct clk *clk;
+
+ struct net_device *ndev;
+
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+};
+
+/************************************************************************
+
+
+ common function
+
+
+************************************************************************/
+static void sh_sir_write(struct sh_sir_self *self, u32 offset, u16 data)
+{
+ iowrite16(data, self->membase + offset);
+}
+
+static u16 sh_sir_read(struct sh_sir_self *self, u32 offset)
+{
+ return ioread16(self->membase + offset);
+}
+
+static void sh_sir_update_bits(struct sh_sir_self *self, u32 offset,
+ u16 mask, u16 data)
+{
+ u16 old, new;
+
+ old = sh_sir_read(self, offset);
+ new = (old & ~mask) | data;
+ if (old != new)
+ sh_sir_write(self, offset, new);
+}
+
+/************************************************************************
+
+
+ CRC function
+
+
+************************************************************************/
+static void sh_sir_crc_reset(struct sh_sir_self *self)
+{
+ sh_sir_write(self, IRIF_CRC0, CRC_RST);
+}
+
+static void sh_sir_crc_add(struct sh_sir_self *self, u8 data)
+{
+ sh_sir_write(self, IRIF_CRC1, (u16)data);
+}
+
+static u16 sh_sir_crc_cnt(struct sh_sir_self *self)
+{
+ return CRC_CT_MASK & sh_sir_read(self, IRIF_CRC0);
+}
+
+static u16 sh_sir_crc_out(struct sh_sir_self *self)
+{
+ return sh_sir_read(self, IRIF_CRC4);
+}
+
+static int sh_sir_crc_init(struct sh_sir_self *self)
+{
+ struct device *dev = &self->ndev->dev;
+ int ret = -EIO;
+ u16 val;
+
+ sh_sir_crc_reset(self);
+
+ sh_sir_crc_add(self, 0xCC);
+ sh_sir_crc_add(self, 0xF5);
+ sh_sir_crc_add(self, 0xF1);
+ sh_sir_crc_add(self, 0xA7);
+
+ val = sh_sir_crc_cnt(self);
+ if (4 != val) {
+ dev_err(dev, "CRC count error %x\n", val);
+ goto crc_init_out;
+ }
+
+ val = sh_sir_crc_out(self);
+ if (0x51DF != val) {
+ dev_err(dev, "CRC result error%x\n", val);
+ goto crc_init_out;
+ }
+
+ ret = 0;
+
+crc_init_out:
+
+ sh_sir_crc_reset(self);
+ return ret;
+}
+
+/************************************************************************
+
+
+ baud rate functions
+
+
+************************************************************************/
+#define SCLK_BASE 1843200 /* 1.8432MHz */
+
+static u32 sh_sir_find_sclk(struct clk *irda_clk)
+{
+ struct cpufreq_frequency_table *freq_table = irda_clk->freq_table;
+ struct clk *pclk = clk_get(NULL, "peripheral_clk");
+ u32 limit, min = 0xffffffff, tmp;
+ int i, index = 0;
+
+ limit = clk_get_rate(pclk);
+ clk_put(pclk);
+
+ /* IrDA can not set over peripheral_clk */
+ for (i = 0;
+ freq_table[i].frequency != CPUFREQ_TABLE_END;
+ i++) {
+ u32 freq = freq_table[i].frequency;
+
+ if (freq == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ /* IrDA should not over peripheral_clk */
+ if (freq > limit)
+ continue;
+
+ tmp = freq % SCLK_BASE;
+ if (tmp < min) {
+ min = tmp;
+ index = i;
+ }
+ }
+
+ return freq_table[index].frequency;
+}
+
+#define ERR_ROUNDING(a) ((a + 5000) / 10000)
+static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate)
+{
+ struct clk *clk;
+ struct device *dev = &self->ndev->dev;
+ u32 rate;
+ u16 uabca, uabc;
+ u16 irbca, irbc;
+ u32 min, rerr, tmp;
+ int i;
+
+ /* Baud Rate Error Correction x 10000 */
+ u32 rate_err_array[] = {
+ 0000, 0625, 1250, 1875,
+ 2500, 3125, 3750, 4375,
+ 5000, 5625, 6250, 6875,
+ 7500, 8125, 8750, 9375,
+ };
+
+ /*
+ * FIXME
+ *
+ * it support 9600 only now
+ */
+ switch (baudrate) {
+ case 9600:
+ break;
+ default:
+ dev_err(dev, "un-supported baudrate %d\n", baudrate);
+ return -EIO;
+ }
+
+ clk = clk_get(NULL, "irda_clk");
+ if (!clk) {
+ dev_err(dev, "can not get irda_clk\n");
+ return -EIO;
+ }
+
+ clk_set_rate(clk, sh_sir_find_sclk(clk));
+ rate = clk_get_rate(clk);
+ clk_put(clk);
+
+ dev_dbg(dev, "selected sclk = %d\n", rate);
+
+ /*
+ * CALCULATION
+ *
+ * 1843200 = system rate / (irbca + (irbc + 1))
+ */
+
+ irbc = rate / SCLK_BASE;
+
+ tmp = rate - (SCLK_BASE * irbc);
+ tmp *= 10000;
+
+ rerr = tmp / SCLK_BASE;
+
+ min = 0xffffffff;
+ irbca = 0;
+ for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) {
+ tmp = abs(rate_err_array[i] - rerr);
+ if (min > tmp) {
+ min = tmp;
+ irbca = i;
+ }
+ }
+
+ tmp = rate / (irbc + ERR_ROUNDING(rate_err_array[irbca]));
+ if ((SCLK_BASE / 100) < abs(tmp - SCLK_BASE))
+ dev_warn(dev, "IrDA freq error margin over %d\n", tmp);
+
+ dev_dbg(dev, "target = %d, result = %d, infrared = %d.%d\n",
+ SCLK_BASE, tmp, irbc, rate_err_array[irbca]);
+
+ irbca = (irbca & 0xF) << 4;
+ irbc = (irbc - 1) & 0xF;
+
+ if (!irbc) {
+ dev_err(dev, "sh_sir can not set 0 in IRIF_SIR2\n");
+ return -EIO;
+ }
+
+ sh_sir_write(self, IRIF_SIR0, IRTPW | IRERRC);
+ sh_sir_write(self, IRIF_SIR1, irbca);
+ sh_sir_write(self, IRIF_SIR2, irbc);
+
+ /*
+ * CALCULATION
+ *
+ * BaudRate[bps] = system rate / (uabca + (uabc + 1) x 16)
+ */
+
+ uabc = rate / baudrate;
+ uabc = (uabc / 16) - 1;
+ uabc = (uabc + 1) * 16;
+
+ tmp = rate - (uabc * baudrate);
+ tmp *= 10000;
+
+ rerr = tmp / baudrate;
+
+ min = 0xffffffff;
+ uabca = 0;
+ for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) {
+ tmp = abs(rate_err_array[i] - rerr);
+ if (min > tmp) {
+ min = tmp;
+ uabca = i;
+ }
+ }
+
+ tmp = rate / (uabc + ERR_ROUNDING(rate_err_array[uabca]));
+ if ((baudrate / 100) < abs(tmp - baudrate))
+ dev_warn(dev, "UART freq error margin over %d\n", tmp);
+
+ dev_dbg(dev, "target = %d, result = %d, uart = %d.%d\n",
+ baudrate, tmp,
+ uabc, rate_err_array[uabca]);
+
+ uabca = (uabca & 0xF) << 4;
+ uabc = (uabc / 16) - 1;
+
+ sh_sir_write(self, IRIF_UART6, uabca);
+ sh_sir_write(self, IRIF_UART7, uabc);
+
+ return 0;
+}
+
+/************************************************************************
+
+
+ iobuf function
+
+
+************************************************************************/
+static int __sh_sir_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL);
+ if (!io->head)
+ return -ENOMEM;
+
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+
+ return 0;
+}
+
+static void sh_sir_remove_iobuf(struct sh_sir_self *self)
+{
+ kfree(self->rx_buff.head);
+ kfree(self->tx_buff.head);
+
+ self->rx_buff.head = NULL;
+ self->tx_buff.head = NULL;
+}
+
+static int sh_sir_init_iobuf(struct sh_sir_self *self, int rxsize, int txsize)
+{
+ int err = -ENOMEM;
+
+ if (self->rx_buff.head ||
+ self->tx_buff.head) {
+ dev_err(&self->ndev->dev, "iobuff has already existed.");
+ return err;
+ }
+
+ err = __sh_sir_init_iobuf(&self->rx_buff, rxsize);
+ if (err)
+ goto iobuf_err;
+
+ err = __sh_sir_init_iobuf(&self->tx_buff, txsize);
+
+iobuf_err:
+ if (err)
+ sh_sir_remove_iobuf(self);
+
+ return err;
+}
+
+/************************************************************************
+
+
+ status function
+
+
+************************************************************************/
+static void sh_sir_clear_all_err(struct sh_sir_self *self)
+{
+ /* Clear error flag for receive pulse width */
+ sh_sir_update_bits(self, IRIF_SIR0, IRERRC, IRERRC);
+
+ /* Clear frame / EOF error flag */
+ sh_sir_write(self, IRIF_SIR_FLG, 0xffff);
+
+ /* Clear all status error */
+ sh_sir_write(self, IRIF_UART_STS2, 0);
+}
+
+static void sh_sir_set_phase(struct sh_sir_self *self, int phase)
+{
+ u16 uart5 = 0;
+ u16 uart0 = 0;
+
+ switch (phase) {
+ case TX_PHASE:
+ uart5 = TBEIM;
+ uart0 = TBEC | TIE;
+ break;
+ case TX_COMP_PHASE:
+ uart5 = TSBEIM;
+ uart0 = TIE;
+ break;
+ case RX_PHASE:
+ uart5 = RX_MASK;
+ uart0 = RIE;
+ break;
+ default:
+ break;
+ }
+
+ sh_sir_write(self, IRIF_UART5, uart5);
+ sh_sir_write(self, IRIF_UART0, uart0);
+}
+
+static int sh_sir_is_which_phase(struct sh_sir_self *self)
+{
+ u16 val = sh_sir_read(self, IRIF_UART5);
+
+ if (val & TBEIM)
+ return TX_PHASE;
+
+ if (val & TSBEIM)
+ return TX_COMP_PHASE;
+
+ if (val & RX_MASK)
+ return RX_PHASE;
+
+ return NONE_PHASE;
+}
+
+static void sh_sir_tx(struct sh_sir_self *self, int phase)
+{
+ switch (phase) {
+ case TX_PHASE:
+ if (0 >= self->tx_buff.len) {
+ sh_sir_set_phase(self, TX_COMP_PHASE);
+ } else {
+ sh_sir_write(self, IRIF_UART3, self->tx_buff.data[0]);
+ self->tx_buff.len--;
+ self->tx_buff.data++;
+ }
+ break;
+ case TX_COMP_PHASE:
+ sh_sir_set_phase(self, RX_PHASE);
+ netif_wake_queue(self->ndev);
+ break;
+ default:
+ dev_err(&self->ndev->dev, "should not happen\n");
+ break;
+ }
+}
+
+static int sh_sir_read_data(struct sh_sir_self *self)
+{
+ u16 val;
+ int timeout = 1024;
+
+ while (timeout--) {
+ val = sh_sir_read(self, IRIF_UART1);
+
+ /* data get */
+ if (val & RBF) {
+ if (val & (URSME | UROVE | URFRE | URPRE))
+ break;
+
+ return (int)sh_sir_read(self, IRIF_UART4);
+ }
+
+ udelay(1);
+ }
+
+ dev_err(&self->ndev->dev, "UART1 %04x : STATUS %04x\n",
+ val, sh_sir_read(self, IRIF_UART_STS2));
+
+ /* read data register for clear error */
+ sh_sir_read(self, IRIF_UART4);
+
+ return -1;
+}
+
+static void sh_sir_rx(struct sh_sir_self *self)
+{
+ int timeout = 1024;
+ int data;
+
+ while (timeout--) {
+ data = sh_sir_read_data(self);
+ if (data < 0)
+ break;
+
+ async_unwrap_char(self->ndev, &self->ndev->stats,
+ &self->rx_buff, (u8)data);
+ self->ndev->last_rx = jiffies;
+
+ if (EOFD & sh_sir_read(self, IRIF_SIR_FRM))
+ continue;
+
+ break;
+ }
+}
+
+static irqreturn_t sh_sir_irq(int irq, void *dev_id)
+{
+ struct sh_sir_self *self = dev_id;
+ struct device *dev = &self->ndev->dev;
+ int phase = sh_sir_is_which_phase(self);
+
+ switch (phase) {
+ case TX_COMP_PHASE:
+ case TX_PHASE:
+ sh_sir_tx(self, phase);
+ break;
+ case RX_PHASE:
+ if (sh_sir_read(self, IRIF_SIR3))
+ dev_err(dev, "rcv pulse width error occurred\n");
+
+ sh_sir_rx(self);
+ sh_sir_clear_all_err(self);
+ break;
+ default:
+ dev_err(dev, "unknown interrupt\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+/************************************************************************
+
+
+ net_device_ops function
+
+
+************************************************************************/
+static int sh_sir_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct sh_sir_self *self = netdev_priv(ndev);
+ int speed = irda_get_next_speed(skb);
+
+ if ((0 < speed) &&
+ (9600 != speed)) {
+ dev_err(&ndev->dev, "support 9600 only (%d)\n", speed);
+ return -EIO;
+ }
+
+ netif_stop_queue(ndev);
+
+ self->tx_buff.data = self->tx_buff.head;
+ self->tx_buff.len = 0;
+ if (skb->len)
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ sh_sir_set_phase(self, TX_PHASE);
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static int sh_sir_ioctl(struct net_device *ndev, struct ifreq *ifreq, int cmd)
+{
+ /*
+ * FIXME
+ *
+ * This function is needed for irda framework.
+ * But nothing to do now
+ */
+ return 0;
+}
+
+static struct net_device_stats *sh_sir_stats(struct net_device *ndev)
+{
+ struct sh_sir_self *self = netdev_priv(ndev);
+
+ return &self->ndev->stats;
+}
+
+static int sh_sir_open(struct net_device *ndev)
+{
+ struct sh_sir_self *self = netdev_priv(ndev);
+ int err;
+
+ clk_enable(self->clk);
+ err = sh_sir_crc_init(self);
+ if (err)
+ goto open_err;
+
+ sh_sir_set_baudrate(self, 9600);
+
+ self->irlap = irlap_open(ndev, &self->qos, DRIVER_NAME);
+ if (!self->irlap)
+ goto open_err;
+
+ /*
+ * Now enable the interrupt then start the queue
+ */
+ sh_sir_update_bits(self, IRIF_SIR_FRM, FRP, FRP);
+ sh_sir_read(self, IRIF_UART1); /* flag clear */
+ sh_sir_read(self, IRIF_UART4); /* flag clear */
+ sh_sir_set_phase(self, RX_PHASE);
+
+ netif_start_queue(ndev);
+
+ dev_info(&self->ndev->dev, "opened\n");
+
+ return 0;
+
+open_err:
+ clk_disable(self->clk);
+
+ return err;
+}
+
+static int sh_sir_stop(struct net_device *ndev)
+{
+ struct sh_sir_self *self = netdev_priv(ndev);
+
+ /* Stop IrLAP */
+ if (self->irlap) {
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+ }
+
+ netif_stop_queue(ndev);
+
+ dev_info(&ndev->dev, "stoped\n");
+
+ return 0;
+}
+
+static const struct net_device_ops sh_sir_ndo = {
+ .ndo_open = sh_sir_open,
+ .ndo_stop = sh_sir_stop,
+ .ndo_start_xmit = sh_sir_hard_xmit,
+ .ndo_do_ioctl = sh_sir_ioctl,
+ .ndo_get_stats = sh_sir_stats,
+};
+
+/************************************************************************
+
+
+ platform_driver function
+
+
+************************************************************************/
+static int __devinit sh_sir_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev;
+ struct sh_sir_self *self;
+ struct resource *res;
+ char clk_name[8];
+ void __iomem *base;
+ unsigned int irq;
+ int err = -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || irq < 0) {
+ dev_err(&pdev->dev, "Not enough platform resources.\n");
+ goto exit;
+ }
+
+ ndev = alloc_irdadev(sizeof(*self));
+ if (!ndev)
+ goto exit;
+
+ base = ioremap_nocache(res->start, resource_size(res));
+ if (!base) {
+ err = -ENXIO;
+ dev_err(&pdev->dev, "Unable to ioremap.\n");
+ goto err_mem_1;
+ }
+
+ self = netdev_priv(ndev);
+ err = sh_sir_init_iobuf(self, IRDA_SKB_MAX_MTU, IRDA_SIR_MAX_FRAME);
+ if (err)
+ goto err_mem_2;
+
+ snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id);
+ self->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(self->clk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ goto err_mem_3;
+ }
+
+ irda_init_max_qos_capabilies(&self->qos);
+
+ ndev->netdev_ops = &sh_sir_ndo;
+ ndev->irq = irq;
+
+ self->membase = base;
+ self->ndev = ndev;
+ self->qos.baud_rate.bits &= IR_9600; /* FIXME */
+ self->qos.min_turn_time.bits = 1; /* 10 ms or more */
+
+ irda_qos_bits_to_value(&self->qos);
+
+ err = register_netdev(ndev);
+ if (err)
+ goto err_mem_4;
+
+ platform_set_drvdata(pdev, ndev);
+
+ if (request_irq(irq, sh_sir_irq, IRQF_DISABLED, "sh_sir", self)) {
+ dev_warn(&pdev->dev, "Unable to attach sh_sir interrupt\n");
+ goto err_mem_4;
+ }
+
+ dev_info(&pdev->dev, "SuperH IrDA probed\n");
+
+ goto exit;
+
+err_mem_4:
+ clk_put(self->clk);
+err_mem_3:
+ sh_sir_remove_iobuf(self);
+err_mem_2:
+ iounmap(self->membase);
+err_mem_1:
+ free_netdev(ndev);
+exit:
+ return err;
+}
+
+static int __devexit sh_sir_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct sh_sir_self *self = netdev_priv(ndev);
+
+ if (!self)
+ return 0;
+
+ unregister_netdev(ndev);
+ clk_put(self->clk);
+ sh_sir_remove_iobuf(self);
+ iounmap(self->membase);
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sh_sir_driver = {
+ .probe = sh_sir_probe,
+ .remove = __devexit_p(sh_sir_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init sh_sir_init(void)
+{
+ return platform_driver_register(&sh_sir_driver);
+}
+
+static void __exit sh_sir_exit(void)
+{
+ platform_driver_unregister(&sh_sir_driver);
+}
+
+module_init(sh_sir_init);
+module_exit(sh_sir_exit);
+
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_DESCRIPTION("SuperH IrDA driver");
+MODULE_LICENSE("GPL");