ALSA: hda - Add hp-dv4 model for IDT 92HD71bx
It turned out that HP dv series have inconsistent the mute-LED GPIO
mapping among various models. dv4/7 seem to use GPIO 0 while dv 5/6
seem to use GPIO 3. The previous commit
26ebe0a28986f4845b2c5bea43ac5cc0b9f27f0a
ALSA: hda - Fix mute-LED GPIO pin for HP dv series
breaks dv5/6.
This patch adds the new quirk model, hp-dv4, to handle HP dv4/7
separately from HP dv5/6.
Tested-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com> (for dv6-1110ax)
Acked-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index eb4ea3d..a0e06d8 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -104,6 +104,7 @@
STAC_DELL_M4_2,
STAC_DELL_M4_3,
STAC_HP_M4,
+ STAC_HP_DV4,
STAC_HP_DV5,
STAC_HP_HDX,
STAC_HP_DV4_1222NR,
@@ -1691,6 +1692,7 @@
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
[STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
+ [STAC_HP_DV4] = NULL,
[STAC_HP_DV5] = NULL,
[STAC_HP_HDX] = NULL,
[STAC_HP_DV4_1222NR] = NULL,
@@ -1703,6 +1705,7 @@
[STAC_DELL_M4_2] = "dell-m4-2",
[STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
+ [STAC_HP_DV4] = "hp-dv4",
[STAC_HP_DV5] = "hp-dv5",
[STAC_HP_HDX] = "hp-hdx",
[STAC_HP_DV4_1222NR] = "hp-dv4-1222nr",
@@ -1721,7 +1724,7 @@
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
- "HP dv4-7", STAC_HP_DV5),
+ "HP dv4-7", STAC_HP_DV4),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3600,
"HP dv4-7", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3610,
@@ -5678,6 +5681,9 @@
spec->num_smuxes = 1;
spec->num_dmuxes = 1;
/* fallthrough */
+ case STAC_HP_DV4:
+ spec->gpio_led = 0x01;
+ /* fallthrough */
case STAC_HP_DV5:
snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
@@ -5686,7 +5692,6 @@
* detection.
*/
spec->hp_detect = 1;
- spec->gpio_led = 0x01;
break;
case STAC_HP_HDX:
spec->num_dmics = 1;
@@ -5749,7 +5754,8 @@
}
/* enable bass on HP dv7 */
- if (spec->board_config == STAC_HP_DV5) {
+ if (spec->board_config == STAC_HP_DV4 ||
+ spec->board_config == STAC_HP_DV5) {
unsigned int cap;
cap = snd_hda_param_read(codec, 0x1, AC_PAR_GPIO_CAP);
cap &= AC_GPIO_IO_COUNT;