sound/soc/samsung/speyside.c - kernel/msm - Gitiles

 /*
  * Speyside audio support
  *
  * Copyright 2011 Wolfson Microelectronics
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/jack.h>
 #include <linux/gpio.h>

 #include "../codecs/wm8915.h"
 #include "../codecs/wm9081.h"

 #define WM8915_HPSEL_GPIO 214

 static int speyside_set_bias_level(struct snd_soc_card *card,
 				   enum snd_soc_bias_level level)
 {
 	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
 	int ret;

 	switch (level) {
 	case SND_SOC_BIAS_STANDBY:
 		ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK1,
 					     32768, SND_SOC_CLOCK_IN);
 		if (ret < 0)
 			return ret;

 		ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK1,
 					  0, 0, 0);
 		if (ret < 0) {
 			pr_err("Failed to stop FLL\n");
 			return ret;
 		}

 	default:
 		break;
 	}

 	return 0;
 }

 static int speyside_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
 	int ret;

 	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
 					 | SND_SOC_DAIFMT_NB_NF
 					 | SND_SOC_DAIFMT_CBM_CFM);
 	if (ret < 0)
 		return ret;

 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
 					 | SND_SOC_DAIFMT_NB_NF
 					 | SND_SOC_DAIFMT_CBM_CFM);
 	if (ret < 0)
 		return ret;

 	ret = snd_soc_dai_set_pll(codec_dai, 0, WM8915_FLL_MCLK1,
 				  32768, 256 * 48000);
 	if (ret < 0)
 		return ret;

 	ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_FLL,
 				     256 * 48000, SND_SOC_CLOCK_IN);
 	if (ret < 0)
 		return ret;

 	return 0;
 }

 static struct snd_soc_ops speyside_ops = {
 	.hw_params = speyside_hw_params,
 };

 static struct snd_soc_jack speyside_headset;

 /* Headset jack detection DAPM pins */
 static struct snd_soc_jack_pin speyside_headset_pins[] = {
 	{
 		.pin = "Headset Mic",
 		.mask = SND_JACK_MICROPHONE,
 	},
 	{
 		.pin = "Headphone",
 		.mask = SND_JACK_HEADPHONE,
 	},
 };

 /* Default the headphone selection to active high */
 static int speyside_jack_polarity;

 static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
 				struct snd_soc_dapm_widget *sink)
 {
 	if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0))
 		return 1;
 	if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0))
 		return 1;

 	return 0;
 }

 static void speyside_set_polarity(struct snd_soc_codec *codec,
 				  int polarity)
 {
 	speyside_jack_polarity = !polarity;
 	gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);

 	/* Re-run DAPM to make sure we're using the correct mic bias */
 	snd_soc_dapm_sync(&codec->dapm);
 }

 static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_dai *dai = rtd->codec_dai;
 	struct snd_soc_codec *codec = rtd->codec;
 	int ret;

 	ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK1, 32768, 0);
 	if (ret < 0)
 		return ret;

 	ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL");
 	if (ret != 0)
 		pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
 	gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);

 	ret = snd_soc_jack_new(codec, "Headset",
 			       SND_JACK_HEADSET | SND_JACK_BTN_0,
 			       &speyside_headset);
 	if (ret)
 		return ret;

 	ret = snd_soc_jack_add_pins(&speyside_headset,
 				    ARRAY_SIZE(speyside_headset_pins),
 				    speyside_headset_pins);
 	if (ret)
 		return ret;

 	wm8915_detect(codec, &speyside_headset, speyside_set_polarity);

 	return 0;
 }

 static int speyside_late_probe(struct snd_soc_card *card)
 {
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");

 	return 0;
 }

 static struct snd_soc_dai_link speyside_dai[] = {
 	{
 		.name = "CPU",
 		.stream_name = "CPU",
 		.cpu_dai_name = "samsung-i2s.0",
 		.codec_dai_name = "wm8915-aif1",
 		.platform_name = "samsung-audio",
 		.codec_name = "wm8915.1-001a",
 		.init = speyside_wm8915_init,
 		.ops = &speyside_ops,
 	},
 	{
 		.name = "Baseband",
 		.stream_name = "Baseband",
 		.cpu_dai_name = "wm8915-aif2",
 		.codec_dai_name = "wm1250-ev1",
 		.codec_name = "wm1250-ev1.1-0027",
 		.ops = &speyside_ops,
 		.ignore_suspend = 1,
 	},
 };

 static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm)
 {
 	snd_soc_dapm_nc_pin(dapm, "LINEOUT");

 	/* At any time the WM9081 is active it will have this clock */
 	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK,
 					48000 * 256, 0);
 }

 static struct snd_soc_aux_dev speyside_aux_dev[] = {
 	{
 		.name = "wm9081",
 		.codec_name = "wm9081.1-006c",
 		.init = speyside_wm9081_init,
 	},
 };

 static struct snd_soc_codec_conf speyside_codec_conf[] = {
 	{
 		.dev_name = "wm9081.1-006c",
 		.name_prefix = "Sub",
 	},
 };

 static const struct snd_kcontrol_new controls[] = {
 	SOC_DAPM_PIN_SWITCH("Main Speaker"),
 	SOC_DAPM_PIN_SWITCH("Main DMIC"),
 	SOC_DAPM_PIN_SWITCH("Main AMIC"),
 	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
 	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
 };

 static struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_HP("Headphone", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),

 	SND_SOC_DAPM_SPK("Main Speaker", NULL),

 	SND_SOC_DAPM_MIC("Main AMIC", NULL),
 	SND_SOC_DAPM_MIC("Main DMIC", NULL),
 };

 static struct snd_soc_dapm_route audio_paths[] = {
 	{ "IN1RN", NULL, "MICB1" },
 	{ "IN1RP", NULL, "MICB1" },
 	{ "IN1RN", NULL, "MICB2" },
 	{ "IN1RP", NULL, "MICB2" },
 	{ "MICB1", NULL, "Headset Mic", speyside_get_micbias },
 	{ "MICB2", NULL, "Headset Mic", speyside_get_micbias },

 	{ "IN1LP", NULL, "MICB2" },
 	{ "IN1RN", NULL, "MICB1" },
 	{ "MICB2", NULL, "Main AMIC" },

 	{ "DMIC1DAT", NULL, "MICB1" },
 	{ "DMIC2DAT", NULL, "MICB1" },
 	{ "MICB1", NULL, "Main DMIC" },

 	{ "Headphone", NULL, "HPOUT1L" },
 	{ "Headphone", NULL, "HPOUT1R" },

 	{ "Sub IN1", NULL, "HPOUT2L" },
 	{ "Sub IN2", NULL, "HPOUT2R" },

 	{ "Main Speaker", NULL, "Sub SPKN" },
 	{ "Main Speaker", NULL, "Sub SPKP" },
 	{ "Main Speaker", NULL, "SPKDAT" },
 };

 static struct snd_soc_card speyside = {
 	.name = "Speyside",
 	.dai_link = speyside_dai,
 	.num_links = ARRAY_SIZE(speyside_dai),
 	.aux_dev = speyside_aux_dev,
 	.num_aux_devs = ARRAY_SIZE(speyside_aux_dev),
 	.codec_conf = speyside_codec_conf,
 	.num_configs = ARRAY_SIZE(speyside_codec_conf),

 	.set_bias_level = speyside_set_bias_level,

 	.controls = controls,
 	.num_controls = ARRAY_SIZE(controls),
 	.dapm_widgets = widgets,
 	.num_dapm_widgets = ARRAY_SIZE(widgets),
 	.dapm_routes = audio_paths,
 	.num_dapm_routes = ARRAY_SIZE(audio_paths),

 	.late_probe = speyside_late_probe,
 };

 static __devinit int speyside_probe(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = &speyside;
 	int ret;

 	card->dev = &pdev->dev;

 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
 		return ret;
 	}

 	return 0;
 }

 static int __devexit speyside_remove(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = platform_get_drvdata(pdev);

 	snd_soc_unregister_card(card);

 	return 0;
 }

 static struct platform_driver speyside_driver = {
 	.driver = {
 		.name = "speyside",
 		.owner = THIS_MODULE,
 		.pm = &snd_soc_pm_ops,
 	},
 	.probe = speyside_probe,
 	.remove = __devexit_p(speyside_remove),
 };

 static int __init speyside_audio_init(void)
 {
 	return platform_driver_register(&speyside_driver);
 }
 module_init(speyside_audio_init);

 static void __exit speyside_audio_exit(void)
 {
 	platform_driver_unregister(&speyside_driver);
 }
 module_exit(speyside_audio_exit);

 MODULE_DESCRIPTION("Speyside audio support");
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:speyside");
	/*
	* Speyside audio support
	*
	* Copyright 2011 Wolfson Microelectronics
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	#include <sound/soc.h>
	#include <sound/soc-dapm.h>
	#include <sound/jack.h>
	#include <linux/gpio.h>

	#include "../codecs/wm8915.h"
	#include "../codecs/wm9081.h"

	#define WM8915_HPSEL_GPIO 214

	static int speyside_set_bias_level(struct snd_soc_card *card,
	enum snd_soc_bias_level level)
	{
	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
	int ret;

	switch (level) {
	case SND_SOC_BIAS_STANDBY:
	ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK1,
	32768, SND_SOC_CLOCK_IN);
	if (ret < 0)
	return ret;

	ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK1,
	0, 0, 0);
	if (ret < 0) {
	pr_err("Failed to stop FLL\n");
	return ret;
	}

	default:
	break;
	}

	return 0;
	}

	static int speyside_hw_params(struct snd_pcm_substream *substream,
	struct snd_pcm_hw_params *params)
	{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
	struct snd_soc_dai *codec_dai = rtd->codec_dai;
	int ret;

	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
	\| SND_SOC_DAIFMT_NB_NF
	\| SND_SOC_DAIFMT_CBM_CFM);
	if (ret < 0)
	return ret;

	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
	\| SND_SOC_DAIFMT_NB_NF
	\| SND_SOC_DAIFMT_CBM_CFM);
	if (ret < 0)
	return ret;

	ret = snd_soc_dai_set_pll(codec_dai, 0, WM8915_FLL_MCLK1,
	32768, 256 * 48000);
	if (ret < 0)
	return ret;

	ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_FLL,
	256 * 48000, SND_SOC_CLOCK_IN);
	if (ret < 0)
	return ret;

	return 0;
	}

	static struct snd_soc_ops speyside_ops = {
	.hw_params = speyside_hw_params,
	};

	static struct snd_soc_jack speyside_headset;

	/* Headset jack detection DAPM pins */
	static struct snd_soc_jack_pin speyside_headset_pins[] = {
	{
	.pin = "Headset Mic",
	.mask = SND_JACK_MICROPHONE,
	},
	{
	.pin = "Headphone",
	.mask = SND_JACK_HEADPHONE,
	},
	};

	/* Default the headphone selection to active high */
	static int speyside_jack_polarity;

	static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
	struct snd_soc_dapm_widget *sink)
	{
	if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0))
	return 1;
	if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0))
	return 1;

	return 0;
	}

	static void speyside_set_polarity(struct snd_soc_codec *codec,
	int polarity)
	{
	speyside_jack_polarity = !polarity;
	gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);

	/* Re-run DAPM to make sure we're using the correct mic bias */
	snd_soc_dapm_sync(&codec->dapm);
	}

	static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd)
	{
	struct snd_soc_dai *dai = rtd->codec_dai;
	struct snd_soc_codec *codec = rtd->codec;
	int ret;

	ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK1, 32768, 0);
	if (ret < 0)
	return ret;

	ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL");
	if (ret != 0)
	pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
	gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);

	ret = snd_soc_jack_new(codec, "Headset",
	SND_JACK_HEADSET \| SND_JACK_BTN_0,
	&speyside_headset);
	if (ret)
	return ret;

	ret = snd_soc_jack_add_pins(&speyside_headset,
	ARRAY_SIZE(speyside_headset_pins),
	speyside_headset_pins);
	if (ret)
	return ret;

	wm8915_detect(codec, &speyside_headset, speyside_set_polarity);

	return 0;
	}

	static int speyside_late_probe(struct snd_soc_card *card)
	{
	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
	snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");

	return 0;
	}

	static struct snd_soc_dai_link speyside_dai[] = {
	{
	.name = "CPU",
	.stream_name = "CPU",
	.cpu_dai_name = "samsung-i2s.0",
	.codec_dai_name = "wm8915-aif1",
	.platform_name = "samsung-audio",
	.codec_name = "wm8915.1-001a",
	.init = speyside_wm8915_init,
	.ops = &speyside_ops,
	},
	{
	.name = "Baseband",
	.stream_name = "Baseband",
	.cpu_dai_name = "wm8915-aif2",
	.codec_dai_name = "wm1250-ev1",
	.codec_name = "wm1250-ev1.1-0027",
	.ops = &speyside_ops,
	.ignore_suspend = 1,
	},
	};

	static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm)
	{
	snd_soc_dapm_nc_pin(dapm, "LINEOUT");

	/* At any time the WM9081 is active it will have this clock */
	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK,
	48000 * 256, 0);
	}

	static struct snd_soc_aux_dev speyside_aux_dev[] = {
	{
	.name = "wm9081",
	.codec_name = "wm9081.1-006c",
	.init = speyside_wm9081_init,
	},
	};

	static struct snd_soc_codec_conf speyside_codec_conf[] = {
	{
	.dev_name = "wm9081.1-006c",
	.name_prefix = "Sub",
	},
	};

	static const struct snd_kcontrol_new controls[] = {
	SOC_DAPM_PIN_SWITCH("Main Speaker"),
	SOC_DAPM_PIN_SWITCH("Main DMIC"),
	SOC_DAPM_PIN_SWITCH("Main AMIC"),
	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
	};

	static struct snd_soc_dapm_widget widgets[] = {
	SND_SOC_DAPM_HP("Headphone", NULL),
	SND_SOC_DAPM_MIC("Headset Mic", NULL),

	SND_SOC_DAPM_SPK("Main Speaker", NULL),

	SND_SOC_DAPM_MIC("Main AMIC", NULL),
	SND_SOC_DAPM_MIC("Main DMIC", NULL),
	};

	static struct snd_soc_dapm_route audio_paths[] = {
	{ "IN1RN", NULL, "MICB1" },
	{ "IN1RP", NULL, "MICB1" },
	{ "IN1RN", NULL, "MICB2" },
	{ "IN1RP", NULL, "MICB2" },
	{ "MICB1", NULL, "Headset Mic", speyside_get_micbias },
	{ "MICB2", NULL, "Headset Mic", speyside_get_micbias },

	{ "IN1LP", NULL, "MICB2" },
	{ "IN1RN", NULL, "MICB1" },
	{ "MICB2", NULL, "Main AMIC" },

	{ "DMIC1DAT", NULL, "MICB1" },
	{ "DMIC2DAT", NULL, "MICB1" },
	{ "MICB1", NULL, "Main DMIC" },

	{ "Headphone", NULL, "HPOUT1L" },
	{ "Headphone", NULL, "HPOUT1R" },

	{ "Sub IN1", NULL, "HPOUT2L" },
	{ "Sub IN2", NULL, "HPOUT2R" },

	{ "Main Speaker", NULL, "Sub SPKN" },
	{ "Main Speaker", NULL, "Sub SPKP" },
	{ "Main Speaker", NULL, "SPKDAT" },
	};

	static struct snd_soc_card speyside = {
	.name = "Speyside",
	.dai_link = speyside_dai,
	.num_links = ARRAY_SIZE(speyside_dai),
	.aux_dev = speyside_aux_dev,
	.num_aux_devs = ARRAY_SIZE(speyside_aux_dev),
	.codec_conf = speyside_codec_conf,
	.num_configs = ARRAY_SIZE(speyside_codec_conf),

	.set_bias_level = speyside_set_bias_level,

	.controls = controls,
	.num_controls = ARRAY_SIZE(controls),
	.dapm_widgets = widgets,
	.num_dapm_widgets = ARRAY_SIZE(widgets),
	.dapm_routes = audio_paths,
	.num_dapm_routes = ARRAY_SIZE(audio_paths),

	.late_probe = speyside_late_probe,
	};

	static __devinit int speyside_probe(struct platform_device *pdev)
	{
	struct snd_soc_card *card = &speyside;
	int ret;

	card->dev = &pdev->dev;

	ret = snd_soc_register_card(card);
	if (ret) {
	dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
	ret);
	return ret;
	}

	return 0;
	}

	static int __devexit speyside_remove(struct platform_device *pdev)
	{
	struct snd_soc_card *card = platform_get_drvdata(pdev);

	snd_soc_unregister_card(card);

	return 0;
	}

	static struct platform_driver speyside_driver = {
	.driver = {
	.name = "speyside",
	.owner = THIS_MODULE,
	.pm = &snd_soc_pm_ops,
	},
	.probe = speyside_probe,
	.remove = __devexit_p(speyside_remove),
	};

	static int __init speyside_audio_init(void)
	{
	return platform_driver_register(&speyside_driver);
	}
	module_init(speyside_audio_init);

	static void __exit speyside_audio_exit(void)
	{
	platform_driver_unregister(&speyside_driver);
	}
	module_exit(speyside_audio_exit);

	MODULE_DESCRIPTION("Speyside audio support");
	MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:speyside");