hwmon: (jc42) do not allow writing to locked registers
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers. In that case, all writes
through the corresponding sysfs files would be silently ignored.
To prevent this, detect the locks and make the affected sysfs files
read-only.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 5efe239..9349912 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@
/* Configuration register defines */
#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
#define JC42_CFG_SHUTDOWN (1 << 8)
#define JC42_CFG_HYST_SHIFT 9
#define JC42_CFG_HYST_MASK 0x03
@@ -380,14 +382,14 @@
static DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
show_temp_crit_hyst, set_temp_crit_hyst);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@
NULL
};
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct jc42_data *data = i2c_get_clientdata(client);
+ unsigned int config = data->config;
+ bool readonly;
+
+ if (attr == &dev_attr_temp1_crit.attr)
+ readonly = config & JC42_CFG_TCRIT_LOCK;
+ else if (attr == &dev_attr_temp1_min.attr ||
+ attr == &dev_attr_temp1_max.attr)
+ readonly = config & JC42_CFG_EVENT_LOCK;
+ else if (attr == &dev_attr_temp1_crit_hyst.attr)
+ readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+ else
+ readonly = true;
+
+ return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
static const struct attribute_group jc42_group = {
.attrs = jc42_attributes,
+ .is_visible = jc42_attribute_mode,
};
/* Return 0 if detection is successful, -ENODEV otherwise */