MFD: twl6040: Remove global pointer for platform_device

There is no need to keep global pointer for the platform
device, since it is only used for dev_* prints, and the
device pointer available within the twl6040 structure.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 24d436c..b0519e6 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -34,8 +34,6 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/twl6040.h>
 
-static struct platform_device *twl6040_dev;
-
 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 {
 	int ret;
@@ -203,11 +201,11 @@
 	if (intid & TWL6040_THINT) {
 		status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 		if (status & TWL6040_TSHUTDET) {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Thermal shutdown, powering-off");
 			twl6040_power(twl6040, 0);
 		} else {
-			dev_warn(&twl6040_dev->dev,
+			dev_warn(twl6040->dev,
 				 "Leaving thermal shutdown, powering-on");
 			twl6040_power(twl6040, 1);
 		}
@@ -227,7 +225,7 @@
 	if (!time_left) {
 		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 		if (!(intid & TWL6040_READYINT)) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"timeout waiting for READYINT\n");
 			return -ETIMEDOUT;
 		}
@@ -255,7 +253,7 @@
 			/* wait for power-up completion */
 			ret = twl6040_power_up_completion(twl6040, naudint);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"automatic power-down failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -264,7 +262,7 @@
 			/* use manual power-up sequence */
 			ret = twl6040_power_up(twl6040);
 			if (ret) {
-				dev_err(&twl6040_dev->dev,
+				dev_err(twl6040->dev,
 					"manual power-up failed\n");
 				twl6040->power_count = 0;
 				goto out;
@@ -276,7 +274,7 @@
 	} else {
 		/* already powered-down */
 		if (!twl6040->power_count) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"device is already powered-off\n");
 			ret = -EPERM;
 			goto out;
@@ -326,7 +324,7 @@
 			lppllctl &= ~TWL6040_LPLLFIN;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -347,7 +345,7 @@
 					  hppllctl);
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -356,7 +354,7 @@
 	case TWL6040_SYSCLK_SEL_HPPLL:
 		/* high-performance PLL can provide only 19.2 MHz */
 		if (freq_out != 19200000) {
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_out %d not supported\n", freq_out);
 			ret = -EINVAL;
 			goto pll_out;
@@ -389,7 +387,7 @@
 				    TWL6040_HPLLENA;
 			break;
 		default:
-			dev_err(&twl6040_dev->dev,
+			dev_err(twl6040->dev,
 				"freq_in %d not supported\n", freq_in);
 			ret = -EINVAL;
 			goto pll_out;
@@ -406,7 +404,7 @@
 		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 		break;
 	default:
-		dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 		ret = -EINVAL;
 		goto pll_out;
 	}
@@ -471,7 +469,6 @@
 
 	platform_set_drvdata(pdev, twl6040);
 
-	twl6040_dev = pdev;
 	twl6040->dev = &pdev->dev;
 	twl6040->audpwron = pdata->audpwron_gpio;
 	twl6040->irq = pdata->naudint_irq;
@@ -566,7 +563,6 @@
 gpio1_err:
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 	return ret;
 }
 
@@ -586,7 +582,6 @@
 	mfd_remove_devices(&pdev->dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(twl6040);
-	twl6040_dev = NULL;
 
 	return 0;
 }