| /* |
| * ahci.c - AHCI SATA support |
| * |
| * Maintained by: Jeff Garzik <jgarzik@pobox.com> |
| * Please ALWAYS copy linux-ide@vger.kernel.org |
| * on emails. |
| * |
| * Copyright 2004-2005 Red Hat, Inc. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * |
| * libata documentation is available via 'make {ps|pdf}docs', |
| * as Documentation/DocBook/libata.* |
| * |
| * AHCI hardware documentation: |
| * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf |
| * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <linux/libata.h> |
| |
| #define DRV_NAME "ahci" |
| #define DRV_VERSION "3.0" |
| |
| |
| enum { |
| AHCI_PCI_BAR = 5, |
| AHCI_MAX_PORTS = 32, |
| AHCI_MAX_SG = 168, /* hardware max is 64K */ |
| AHCI_DMA_BOUNDARY = 0xffffffff, |
| AHCI_USE_CLUSTERING = 1, |
| AHCI_MAX_CMDS = 32, |
| AHCI_CMD_SZ = 32, |
| AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, |
| AHCI_RX_FIS_SZ = 256, |
| AHCI_CMD_TBL_CDB = 0x40, |
| AHCI_CMD_TBL_HDR_SZ = 0x80, |
| AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), |
| AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, |
| AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + |
| AHCI_RX_FIS_SZ, |
| AHCI_IRQ_ON_SG = (1 << 31), |
| AHCI_CMD_ATAPI = (1 << 5), |
| AHCI_CMD_WRITE = (1 << 6), |
| AHCI_CMD_PREFETCH = (1 << 7), |
| AHCI_CMD_RESET = (1 << 8), |
| AHCI_CMD_CLR_BUSY = (1 << 10), |
| |
| RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ |
| RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ |
| RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ |
| |
| board_ahci = 0, |
| board_ahci_vt8251 = 1, |
| board_ahci_ign_iferr = 2, |
| board_ahci_sb600 = 3, |
| board_ahci_mv = 4, |
| |
| /* global controller registers */ |
| HOST_CAP = 0x00, /* host capabilities */ |
| HOST_CTL = 0x04, /* global host control */ |
| HOST_IRQ_STAT = 0x08, /* interrupt status */ |
| HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ |
| HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ |
| |
| /* HOST_CTL bits */ |
| HOST_RESET = (1 << 0), /* reset controller; self-clear */ |
| HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ |
| HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ |
| |
| /* HOST_CAP bits */ |
| HOST_CAP_SSC = (1 << 14), /* Slumber capable */ |
| HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ |
| HOST_CAP_CLO = (1 << 24), /* Command List Override support */ |
| HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ |
| HOST_CAP_SNTF = (1 << 29), /* SNotification register */ |
| HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ |
| HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ |
| |
| /* registers for each SATA port */ |
| PORT_LST_ADDR = 0x00, /* command list DMA addr */ |
| PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ |
| PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ |
| PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ |
| PORT_IRQ_STAT = 0x10, /* interrupt status */ |
| PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ |
| PORT_CMD = 0x18, /* port command */ |
| PORT_TFDATA = 0x20, /* taskfile data */ |
| PORT_SIG = 0x24, /* device TF signature */ |
| PORT_CMD_ISSUE = 0x38, /* command issue */ |
| PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ |
| PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ |
| PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ |
| PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ |
| PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ |
| |
| /* PORT_IRQ_{STAT,MASK} bits */ |
| PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ |
| PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ |
| PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ |
| PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ |
| PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ |
| PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ |
| PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ |
| PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ |
| |
| PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ |
| PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ |
| PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ |
| PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ |
| PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ |
| PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ |
| PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ |
| PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ |
| PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ |
| |
| PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | |
| PORT_IRQ_IF_ERR | |
| PORT_IRQ_CONNECT | |
| PORT_IRQ_PHYRDY | |
| PORT_IRQ_UNK_FIS | |
| PORT_IRQ_BAD_PMP, |
| PORT_IRQ_ERROR = PORT_IRQ_FREEZE | |
| PORT_IRQ_TF_ERR | |
| PORT_IRQ_HBUS_DATA_ERR, |
| DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | |
| PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | |
| PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, |
| |
| /* PORT_CMD bits */ |
| PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ |
| PORT_CMD_PMP = (1 << 17), /* PMP attached */ |
| PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ |
| PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ |
| PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ |
| PORT_CMD_CLO = (1 << 3), /* Command list override */ |
| PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ |
| PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ |
| PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ |
| |
| PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ |
| PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ |
| PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ |
| PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ |
| |
| /* hpriv->flags bits */ |
| AHCI_HFLAG_NO_NCQ = (1 << 0), |
| AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ |
| AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ |
| AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ |
| AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ |
| AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ |
| AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ |
| |
| /* ap->flags bits */ |
| AHCI_FLAG_NO_HOTPLUG = (1 << 24), /* ignore PxSERR.DIAG.N */ |
| |
| AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | |
| ATA_FLAG_ACPI_SATA | ATA_FLAG_AN, |
| AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY, |
| }; |
| |
| struct ahci_cmd_hdr { |
| u32 opts; |
| u32 status; |
| u32 tbl_addr; |
| u32 tbl_addr_hi; |
| u32 reserved[4]; |
| }; |
| |
| struct ahci_sg { |
| u32 addr; |
| u32 addr_hi; |
| u32 reserved; |
| u32 flags_size; |
| }; |
| |
| struct ahci_host_priv { |
| unsigned int flags; /* AHCI_HFLAG_* */ |
| u32 cap; /* cap to use */ |
| u32 port_map; /* port map to use */ |
| u32 saved_cap; /* saved initial cap */ |
| u32 saved_port_map; /* saved initial port_map */ |
| }; |
| |
| struct ahci_port_priv { |
| struct ata_link *active_link; |
| struct ahci_cmd_hdr *cmd_slot; |
| dma_addr_t cmd_slot_dma; |
| void *cmd_tbl; |
| dma_addr_t cmd_tbl_dma; |
| void *rx_fis; |
| dma_addr_t rx_fis_dma; |
| /* for NCQ spurious interrupt analysis */ |
| unsigned int ncq_saw_d2h:1; |
| unsigned int ncq_saw_dmas:1; |
| unsigned int ncq_saw_sdb:1; |
| u32 intr_mask; /* interrupts to enable */ |
| }; |
| |
| static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); |
| static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); |
| static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); |
| static void ahci_irq_clear(struct ata_port *ap); |
| static int ahci_port_start(struct ata_port *ap); |
| static void ahci_port_stop(struct ata_port *ap); |
| static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); |
| static void ahci_qc_prep(struct ata_queued_cmd *qc); |
| static u8 ahci_check_status(struct ata_port *ap); |
| static void ahci_freeze(struct ata_port *ap); |
| static void ahci_thaw(struct ata_port *ap); |
| static void ahci_pmp_attach(struct ata_port *ap); |
| static void ahci_pmp_detach(struct ata_port *ap); |
| static void ahci_error_handler(struct ata_port *ap); |
| static void ahci_vt8251_error_handler(struct ata_port *ap); |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); |
| static int ahci_port_resume(struct ata_port *ap); |
| static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); |
| static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, |
| u32 opts); |
| #ifdef CONFIG_PM |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); |
| static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); |
| static int ahci_pci_device_resume(struct pci_dev *pdev); |
| #endif |
| |
| static struct scsi_host_template ahci_sht = { |
| .module = THIS_MODULE, |
| .name = DRV_NAME, |
| .ioctl = ata_scsi_ioctl, |
| .queuecommand = ata_scsi_queuecmd, |
| .change_queue_depth = ata_scsi_change_queue_depth, |
| .can_queue = AHCI_MAX_CMDS - 1, |
| .this_id = ATA_SHT_THIS_ID, |
| .sg_tablesize = AHCI_MAX_SG, |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| .emulated = ATA_SHT_EMULATED, |
| .use_clustering = AHCI_USE_CLUSTERING, |
| .proc_name = DRV_NAME, |
| .dma_boundary = AHCI_DMA_BOUNDARY, |
| .slave_configure = ata_scsi_slave_config, |
| .slave_destroy = ata_scsi_slave_destroy, |
| .bios_param = ata_std_bios_param, |
| }; |
| |
| static const struct ata_port_operations ahci_ops = { |
| .check_status = ahci_check_status, |
| .check_altstatus = ahci_check_status, |
| .dev_select = ata_noop_dev_select, |
| |
| .tf_read = ahci_tf_read, |
| |
| .qc_defer = sata_pmp_qc_defer_cmd_switch, |
| .qc_prep = ahci_qc_prep, |
| .qc_issue = ahci_qc_issue, |
| |
| .irq_clear = ahci_irq_clear, |
| |
| .scr_read = ahci_scr_read, |
| .scr_write = ahci_scr_write, |
| |
| .freeze = ahci_freeze, |
| .thaw = ahci_thaw, |
| |
| .error_handler = ahci_error_handler, |
| .post_internal_cmd = ahci_post_internal_cmd, |
| |
| .pmp_attach = ahci_pmp_attach, |
| .pmp_detach = ahci_pmp_detach, |
| |
| #ifdef CONFIG_PM |
| .port_suspend = ahci_port_suspend, |
| .port_resume = ahci_port_resume, |
| #endif |
| |
| .port_start = ahci_port_start, |
| .port_stop = ahci_port_stop, |
| }; |
| |
| static const struct ata_port_operations ahci_vt8251_ops = { |
| .check_status = ahci_check_status, |
| .check_altstatus = ahci_check_status, |
| .dev_select = ata_noop_dev_select, |
| |
| .tf_read = ahci_tf_read, |
| |
| .qc_defer = sata_pmp_qc_defer_cmd_switch, |
| .qc_prep = ahci_qc_prep, |
| .qc_issue = ahci_qc_issue, |
| |
| .irq_clear = ahci_irq_clear, |
| |
| .scr_read = ahci_scr_read, |
| .scr_write = ahci_scr_write, |
| |
| .freeze = ahci_freeze, |
| .thaw = ahci_thaw, |
| |
| .error_handler = ahci_vt8251_error_handler, |
| .post_internal_cmd = ahci_post_internal_cmd, |
| |
| .pmp_attach = ahci_pmp_attach, |
| .pmp_detach = ahci_pmp_detach, |
| |
| #ifdef CONFIG_PM |
| .port_suspend = ahci_port_suspend, |
| .port_resume = ahci_port_resume, |
| #endif |
| |
| .port_start = ahci_port_start, |
| .port_stop = ahci_port_stop, |
| }; |
| |
| #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) |
| |
| static const struct ata_port_info ahci_port_info[] = { |
| /* board_ahci */ |
| { |
| .flags = AHCI_FLAG_COMMON, |
| .link_flags = AHCI_LFLAG_COMMON, |
| .pio_mask = 0x1f, /* pio0-4 */ |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_ops, |
| }, |
| /* board_ahci_vt8251 */ |
| { |
| AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), |
| .flags = AHCI_FLAG_COMMON, |
| .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME, |
| .pio_mask = 0x1f, /* pio0-4 */ |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_vt8251_ops, |
| }, |
| /* board_ahci_ign_iferr */ |
| { |
| AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), |
| .flags = AHCI_FLAG_COMMON, |
| .link_flags = AHCI_LFLAG_COMMON, |
| .pio_mask = 0x1f, /* pio0-4 */ |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_ops, |
| }, |
| /* board_ahci_sb600 */ |
| { |
| AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | |
| AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP), |
| .flags = AHCI_FLAG_COMMON, |
| .link_flags = AHCI_LFLAG_COMMON, |
| .pio_mask = 0x1f, /* pio0-4 */ |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_ops, |
| }, |
| /* board_ahci_mv */ |
| { |
| AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | |
| AHCI_HFLAG_MV_PATA), |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, |
| .link_flags = AHCI_LFLAG_COMMON, |
| .pio_mask = 0x1f, /* pio0-4 */ |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_ops, |
| }, |
| }; |
| |
| static const struct pci_device_id ahci_pci_tbl[] = { |
| /* Intel */ |
| { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */ |
| { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */ |
| { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */ |
| { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */ |
| { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */ |
| { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */ |
| { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */ |
| { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */ |
| { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */ |
| { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */ |
| { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */ |
| { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */ |
| { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ |
| { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ |
| { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ |
| { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ |
| { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ |
| { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ |
| { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ |
| |
| /* JMicron 360/1/3/5/6, match class to avoid IDE function */ |
| { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr }, |
| |
| /* ATI */ |
| { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ |
| { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */ |
| { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */ |
| { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */ |
| { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */ |
| { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */ |
| { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */ |
| |
| /* VIA */ |
| { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ |
| { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ |
| |
| /* NVIDIA */ |
| { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ |
| { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ |
| { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ |
| |
| /* SiS */ |
| { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ |
| { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ |
| { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ |
| |
| /* Marvell */ |
| { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ |
| |
| /* Generic, PCI class code for AHCI */ |
| { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, |
| |
| { } /* terminate list */ |
| }; |
| |
| |
| static struct pci_driver ahci_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = ahci_pci_tbl, |
| .probe = ahci_init_one, |
| .remove = ata_pci_remove_one, |
| #ifdef CONFIG_PM |
| .suspend = ahci_pci_device_suspend, |
| .resume = ahci_pci_device_resume, |
| #endif |
| }; |
| |
| |
| static inline int ahci_nr_ports(u32 cap) |
| { |
| return (cap & 0x1f) + 1; |
| } |
| |
| static inline void __iomem *__ahci_port_base(struct ata_host *host, |
| unsigned int port_no) |
| { |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| |
| return mmio + 0x100 + (port_no * 0x80); |
| } |
| |
| static inline void __iomem *ahci_port_base(struct ata_port *ap) |
| { |
| return __ahci_port_base(ap->host, ap->port_no); |
| } |
| |
| /** |
| * ahci_save_initial_config - Save and fixup initial config values |
| * @pdev: target PCI device |
| * @hpriv: host private area to store config values |
| * |
| * Some registers containing configuration info might be setup by |
| * BIOS and might be cleared on reset. This function saves the |
| * initial values of those registers into @hpriv such that they |
| * can be restored after controller reset. |
| * |
| * If inconsistent, config values are fixed up by this function. |
| * |
| * LOCKING: |
| * None. |
| */ |
| static void ahci_save_initial_config(struct pci_dev *pdev, |
| struct ahci_host_priv *hpriv) |
| { |
| void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; |
| u32 cap, port_map; |
| int i; |
| |
| /* Values prefixed with saved_ are written back to host after |
| * reset. Values without are used for driver operation. |
| */ |
| hpriv->saved_cap = cap = readl(mmio + HOST_CAP); |
| hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); |
| |
| /* some chips have errata preventing 64bit use */ |
| if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { |
| dev_printk(KERN_INFO, &pdev->dev, |
| "controller can't do 64bit DMA, forcing 32bit\n"); |
| cap &= ~HOST_CAP_64; |
| } |
| |
| if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { |
| dev_printk(KERN_INFO, &pdev->dev, |
| "controller can't do NCQ, turning off CAP_NCQ\n"); |
| cap &= ~HOST_CAP_NCQ; |
| } |
| |
| if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { |
| dev_printk(KERN_INFO, &pdev->dev, |
| "controller can't do PMP, turning off CAP_PMP\n"); |
| cap &= ~HOST_CAP_PMP; |
| } |
| |
| /* |
| * Temporary Marvell 6145 hack: PATA port presence |
| * is asserted through the standard AHCI port |
| * presence register, as bit 4 (counting from 0) |
| */ |
| if (hpriv->flags & AHCI_HFLAG_MV_PATA) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "MV_AHCI HACK: port_map %x -> %x\n", |
| hpriv->port_map, |
| hpriv->port_map & 0xf); |
| |
| port_map &= 0xf; |
| } |
| |
| /* cross check port_map and cap.n_ports */ |
| if (port_map) { |
| u32 tmp_port_map = port_map; |
| int n_ports = ahci_nr_ports(cap); |
| |
| for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) { |
| if (tmp_port_map & (1 << i)) { |
| n_ports--; |
| tmp_port_map &= ~(1 << i); |
| } |
| } |
| |
| /* If n_ports and port_map are inconsistent, whine and |
| * clear port_map and let it be generated from n_ports. |
| */ |
| if (n_ports || tmp_port_map) { |
| dev_printk(KERN_WARNING, &pdev->dev, |
| "nr_ports (%u) and implemented port map " |
| "(0x%x) don't match, using nr_ports\n", |
| ahci_nr_ports(cap), port_map); |
| port_map = 0; |
| } |
| } |
| |
| /* fabricate port_map from cap.nr_ports */ |
| if (!port_map) { |
| port_map = (1 << ahci_nr_ports(cap)) - 1; |
| dev_printk(KERN_WARNING, &pdev->dev, |
| "forcing PORTS_IMPL to 0x%x\n", port_map); |
| |
| /* write the fixed up value to the PI register */ |
| hpriv->saved_port_map = port_map; |
| } |
| |
| /* record values to use during operation */ |
| hpriv->cap = cap; |
| hpriv->port_map = port_map; |
| } |
| |
| /** |
| * ahci_restore_initial_config - Restore initial config |
| * @host: target ATA host |
| * |
| * Restore initial config stored by ahci_save_initial_config(). |
| * |
| * LOCKING: |
| * None. |
| */ |
| static void ahci_restore_initial_config(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| |
| writel(hpriv->saved_cap, mmio + HOST_CAP); |
| writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); |
| (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ |
| } |
| |
| static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) |
| { |
| static const int offset[] = { |
| [SCR_STATUS] = PORT_SCR_STAT, |
| [SCR_CONTROL] = PORT_SCR_CTL, |
| [SCR_ERROR] = PORT_SCR_ERR, |
| [SCR_ACTIVE] = PORT_SCR_ACT, |
| [SCR_NOTIFICATION] = PORT_SCR_NTF, |
| }; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| |
| if (sc_reg < ARRAY_SIZE(offset) && |
| (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) |
| return offset[sc_reg]; |
| return 0; |
| } |
| |
| static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| int offset = ahci_scr_offset(ap, sc_reg); |
| |
| if (offset) { |
| *val = readl(port_mmio + offset); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| int offset = ahci_scr_offset(ap, sc_reg); |
| |
| if (offset) { |
| writel(val, port_mmio + offset); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static void ahci_start_engine(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| /* start DMA */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_START; |
| writel(tmp, port_mmio + PORT_CMD); |
| readl(port_mmio + PORT_CMD); /* flush */ |
| } |
| |
| static int ahci_stop_engine(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| tmp = readl(port_mmio + PORT_CMD); |
| |
| /* check if the HBA is idle */ |
| if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) |
| return 0; |
| |
| /* setting HBA to idle */ |
| tmp &= ~PORT_CMD_START; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* wait for engine to stop. This could be as long as 500 msec */ |
| tmp = ata_wait_register(port_mmio + PORT_CMD, |
| PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); |
| if (tmp & PORT_CMD_LIST_ON) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void ahci_start_fis_rx(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 tmp; |
| |
| /* set FIS registers */ |
| if (hpriv->cap & HOST_CAP_64) |
| writel((pp->cmd_slot_dma >> 16) >> 16, |
| port_mmio + PORT_LST_ADDR_HI); |
| writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); |
| |
| if (hpriv->cap & HOST_CAP_64) |
| writel((pp->rx_fis_dma >> 16) >> 16, |
| port_mmio + PORT_FIS_ADDR_HI); |
| writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); |
| |
| /* enable FIS reception */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_FIS_RX; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* flush */ |
| readl(port_mmio + PORT_CMD); |
| } |
| |
| static int ahci_stop_fis_rx(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| |
| /* disable FIS reception */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp &= ~PORT_CMD_FIS_RX; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| /* wait for completion, spec says 500ms, give it 1000 */ |
| tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, |
| PORT_CMD_FIS_ON, 10, 1000); |
| if (tmp & PORT_CMD_FIS_ON) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static void ahci_power_up(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 cmd; |
| |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; |
| |
| /* spin up device */ |
| if (hpriv->cap & HOST_CAP_SSS) { |
| cmd |= PORT_CMD_SPIN_UP; |
| writel(cmd, port_mmio + PORT_CMD); |
| } |
| |
| /* wake up link */ |
| writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); |
| } |
| |
| #ifdef CONFIG_PM |
| static void ahci_power_down(struct ata_port *ap) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 cmd, scontrol; |
| |
| if (!(hpriv->cap & HOST_CAP_SSS)) |
| return; |
| |
| /* put device into listen mode, first set PxSCTL.DET to 0 */ |
| scontrol = readl(port_mmio + PORT_SCR_CTL); |
| scontrol &= ~0xf; |
| writel(scontrol, port_mmio + PORT_SCR_CTL); |
| |
| /* then set PxCMD.SUD to 0 */ |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; |
| cmd &= ~PORT_CMD_SPIN_UP; |
| writel(cmd, port_mmio + PORT_CMD); |
| } |
| #endif |
| |
| static void ahci_start_port(struct ata_port *ap) |
| { |
| /* enable FIS reception */ |
| ahci_start_fis_rx(ap); |
| |
| /* enable DMA */ |
| ahci_start_engine(ap); |
| } |
| |
| static int ahci_deinit_port(struct ata_port *ap, const char **emsg) |
| { |
| int rc; |
| |
| /* disable DMA */ |
| rc = ahci_stop_engine(ap); |
| if (rc) { |
| *emsg = "failed to stop engine"; |
| return rc; |
| } |
| |
| /* disable FIS reception */ |
| rc = ahci_stop_fis_rx(ap); |
| if (rc) { |
| *emsg = "failed stop FIS RX"; |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int ahci_reset_controller(struct ata_host *host) |
| { |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| u32 tmp; |
| |
| /* we must be in AHCI mode, before using anything |
| * AHCI-specific, such as HOST_RESET. |
| */ |
| tmp = readl(mmio + HOST_CTL); |
| if (!(tmp & HOST_AHCI_EN)) |
| writel(tmp | HOST_AHCI_EN, mmio + HOST_CTL); |
| |
| /* global controller reset */ |
| if ((tmp & HOST_RESET) == 0) { |
| writel(tmp | HOST_RESET, mmio + HOST_CTL); |
| readl(mmio + HOST_CTL); /* flush */ |
| } |
| |
| /* reset must complete within 1 second, or |
| * the hardware should be considered fried. |
| */ |
| ssleep(1); |
| |
| tmp = readl(mmio + HOST_CTL); |
| if (tmp & HOST_RESET) { |
| dev_printk(KERN_ERR, host->dev, |
| "controller reset failed (0x%x)\n", tmp); |
| return -EIO; |
| } |
| |
| /* turn on AHCI mode */ |
| writel(HOST_AHCI_EN, mmio + HOST_CTL); |
| (void) readl(mmio + HOST_CTL); /* flush */ |
| |
| /* some registers might be cleared on reset. restore initial values */ |
| ahci_restore_initial_config(host); |
| |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) { |
| u16 tmp16; |
| |
| /* configure PCS */ |
| pci_read_config_word(pdev, 0x92, &tmp16); |
| tmp16 |= 0xf; |
| pci_write_config_word(pdev, 0x92, tmp16); |
| } |
| |
| return 0; |
| } |
| |
| static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, |
| int port_no, void __iomem *mmio, |
| void __iomem *port_mmio) |
| { |
| const char *emsg = NULL; |
| int rc; |
| u32 tmp; |
| |
| /* make sure port is not active */ |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc) |
| dev_printk(KERN_WARNING, &pdev->dev, |
| "%s (%d)\n", emsg, rc); |
| |
| /* clear SError */ |
| tmp = readl(port_mmio + PORT_SCR_ERR); |
| VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); |
| writel(tmp, port_mmio + PORT_SCR_ERR); |
| |
| /* clear port IRQ */ |
| tmp = readl(port_mmio + PORT_IRQ_STAT); |
| VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); |
| if (tmp) |
| writel(tmp, port_mmio + PORT_IRQ_STAT); |
| |
| writel(1 << port_no, mmio + HOST_IRQ_STAT); |
| } |
| |
| static void ahci_init_controller(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| int i; |
| void __iomem *port_mmio; |
| u32 tmp; |
| |
| if (hpriv->flags & AHCI_HFLAG_MV_PATA) { |
| port_mmio = __ahci_port_base(host, 4); |
| |
| writel(0, port_mmio + PORT_IRQ_MASK); |
| |
| /* clear port IRQ */ |
| tmp = readl(port_mmio + PORT_IRQ_STAT); |
| VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); |
| if (tmp) |
| writel(tmp, port_mmio + PORT_IRQ_STAT); |
| } |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| |
| port_mmio = ahci_port_base(ap); |
| if (ata_port_is_dummy(ap)) |
| continue; |
| |
| ahci_port_init(pdev, ap, i, mmio, port_mmio); |
| } |
| |
| tmp = readl(mmio + HOST_CTL); |
| VPRINTK("HOST_CTL 0x%x\n", tmp); |
| writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); |
| tmp = readl(mmio + HOST_CTL); |
| VPRINTK("HOST_CTL 0x%x\n", tmp); |
| } |
| |
| static unsigned int ahci_dev_classify(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ata_taskfile tf; |
| u32 tmp; |
| |
| tmp = readl(port_mmio + PORT_SIG); |
| tf.lbah = (tmp >> 24) & 0xff; |
| tf.lbam = (tmp >> 16) & 0xff; |
| tf.lbal = (tmp >> 8) & 0xff; |
| tf.nsect = (tmp) & 0xff; |
| |
| return ata_dev_classify(&tf); |
| } |
| |
| static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, |
| u32 opts) |
| { |
| dma_addr_t cmd_tbl_dma; |
| |
| cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; |
| |
| pp->cmd_slot[tag].opts = cpu_to_le32(opts); |
| pp->cmd_slot[tag].status = 0; |
| pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); |
| pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); |
| } |
| |
| static int ahci_kick_engine(struct ata_port *ap, int force_restart) |
| { |
| void __iomem *port_mmio = ap->ioaddr.cmd_addr; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| u32 tmp; |
| int busy, rc; |
| |
| /* do we need to kick the port? */ |
| busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ); |
| if (!busy && !force_restart) |
| return 0; |
| |
| /* stop engine */ |
| rc = ahci_stop_engine(ap); |
| if (rc) |
| goto out_restart; |
| |
| /* need to do CLO? */ |
| if (!busy) { |
| rc = 0; |
| goto out_restart; |
| } |
| |
| if (!(hpriv->cap & HOST_CAP_CLO)) { |
| rc = -EOPNOTSUPP; |
| goto out_restart; |
| } |
| |
| /* perform CLO */ |
| tmp = readl(port_mmio + PORT_CMD); |
| tmp |= PORT_CMD_CLO; |
| writel(tmp, port_mmio + PORT_CMD); |
| |
| rc = 0; |
| tmp = ata_wait_register(port_mmio + PORT_CMD, |
| PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); |
| if (tmp & PORT_CMD_CLO) |
| rc = -EIO; |
| |
| /* restart engine */ |
| out_restart: |
| ahci_start_engine(ap); |
| return rc; |
| } |
| |
| static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, |
| struct ata_taskfile *tf, int is_cmd, u16 flags, |
| unsigned long timeout_msec) |
| { |
| const u32 cmd_fis_len = 5; /* five dwords */ |
| struct ahci_port_priv *pp = ap->private_data; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u8 *fis = pp->cmd_tbl; |
| u32 tmp; |
| |
| /* prep the command */ |
| ata_tf_to_fis(tf, pmp, is_cmd, fis); |
| ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); |
| |
| /* issue & wait */ |
| writel(1, port_mmio + PORT_CMD_ISSUE); |
| |
| if (timeout_msec) { |
| tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, |
| 1, timeout_msec); |
| if (tmp & 0x1) { |
| ahci_kick_engine(ap, 1); |
| return -EBUSY; |
| } |
| } else |
| readl(port_mmio + PORT_CMD_ISSUE); /* flush */ |
| |
| return 0; |
| } |
| |
| static int ahci_do_softreset(struct ata_link *link, unsigned int *class, |
| int pmp, unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| const char *reason = NULL; |
| unsigned long now, msecs; |
| struct ata_taskfile tf; |
| int rc; |
| |
| DPRINTK("ENTER\n"); |
| |
| if (ata_link_offline(link)) { |
| DPRINTK("PHY reports no device\n"); |
| *class = ATA_DEV_NONE; |
| return 0; |
| } |
| |
| /* prepare for SRST (AHCI-1.1 10.4.1) */ |
| rc = ahci_kick_engine(ap, 1); |
| if (rc) |
| ata_link_printk(link, KERN_WARNING, |
| "failed to reset engine (errno=%d)", rc); |
| |
| ata_tf_init(link->device, &tf); |
| |
| /* issue the first D2H Register FIS */ |
| msecs = 0; |
| now = jiffies; |
| if (time_after(now, deadline)) |
| msecs = jiffies_to_msecs(deadline - now); |
| |
| tf.ctl |= ATA_SRST; |
| if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, |
| AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { |
| rc = -EIO; |
| reason = "1st FIS failed"; |
| goto fail; |
| } |
| |
| /* spec says at least 5us, but be generous and sleep for 1ms */ |
| msleep(1); |
| |
| /* issue the second D2H Register FIS */ |
| tf.ctl &= ~ATA_SRST; |
| ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); |
| |
| /* spec mandates ">= 2ms" before checking status. |
| * We wait 150ms, because that was the magic delay used for |
| * ATAPI devices in Hale Landis's ATADRVR, for the period of time |
| * between when the ATA command register is written, and then |
| * status is checked. Because waiting for "a while" before |
| * checking status is fine, post SRST, we perform this magic |
| * delay here as well. |
| */ |
| msleep(150); |
| |
| rc = ata_wait_ready(ap, deadline); |
| /* link occupied, -ENODEV too is an error */ |
| if (rc) { |
| reason = "device not ready"; |
| goto fail; |
| } |
| *class = ahci_dev_classify(ap); |
| |
| DPRINTK("EXIT, class=%u\n", *class); |
| return 0; |
| |
| fail: |
| ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); |
| return rc; |
| } |
| |
| static int ahci_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| int pmp = 0; |
| |
| if (link->ap->flags & ATA_FLAG_PMP) |
| pmp = SATA_PMP_CTRL_PORT; |
| |
| return ahci_do_softreset(link, class, pmp, deadline); |
| } |
| |
| static int ahci_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
| struct ata_taskfile tf; |
| int rc; |
| |
| DPRINTK("ENTER\n"); |
| |
| ahci_stop_engine(ap); |
| |
| /* clear D2H reception area to properly wait for D2H FIS */ |
| ata_tf_init(link->device, &tf); |
| tf.command = 0x80; |
| ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
| |
| rc = sata_std_hardreset(link, class, deadline); |
| |
| ahci_start_engine(ap); |
| |
| if (rc == 0 && ata_link_online(link)) |
| *class = ahci_dev_classify(ap); |
| if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN) |
| *class = ATA_DEV_NONE; |
| |
| DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); |
| return rc; |
| } |
| |
| static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| u32 serror; |
| int rc; |
| |
| DPRINTK("ENTER\n"); |
| |
| ahci_stop_engine(ap); |
| |
| rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), |
| deadline); |
| |
| /* vt8251 needs SError cleared for the port to operate */ |
| ahci_scr_read(ap, SCR_ERROR, &serror); |
| ahci_scr_write(ap, SCR_ERROR, serror); |
| |
| ahci_start_engine(ap); |
| |
| DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); |
| |
| /* vt8251 doesn't clear BSY on signature FIS reception, |
| * request follow-up softreset. |
| */ |
| return rc ?: -EAGAIN; |
| } |
| |
| static void ahci_postreset(struct ata_link *link, unsigned int *class) |
| { |
| struct ata_port *ap = link->ap; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 new_tmp, tmp; |
| |
| ata_std_postreset(link, class); |
| |
| /* Make sure port's ATAPI bit is set appropriately */ |
| new_tmp = tmp = readl(port_mmio + PORT_CMD); |
| if (*class == ATA_DEV_ATAPI) |
| new_tmp |= PORT_CMD_ATAPI; |
| else |
| new_tmp &= ~PORT_CMD_ATAPI; |
| if (new_tmp != tmp) { |
| writel(new_tmp, port_mmio + PORT_CMD); |
| readl(port_mmio + PORT_CMD); /* flush */ |
| } |
| } |
| |
| static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| return ahci_do_softreset(link, class, link->pmp, deadline); |
| } |
| |
| static u8 ahci_check_status(struct ata_port *ap) |
| { |
| void __iomem *mmio = ap->ioaddr.cmd_addr; |
| |
| return readl(mmio + PORT_TFDATA) & 0xFF; |
| } |
| |
| static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) |
| { |
| struct ahci_port_priv *pp = ap->private_data; |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
| |
| ata_tf_from_fis(d2h_fis, tf); |
| } |
| |
| static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) |
| { |
| struct scatterlist *sg; |
| struct ahci_sg *ahci_sg; |
| unsigned int n_sg = 0; |
| |
| VPRINTK("ENTER\n"); |
| |
| /* |
| * Next, the S/G list. |
| */ |
| ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; |
| ata_for_each_sg(sg, qc) { |
| dma_addr_t addr = sg_dma_address(sg); |
| u32 sg_len = sg_dma_len(sg); |
| |
| ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); |
| ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); |
| ahci_sg->flags_size = cpu_to_le32(sg_len - 1); |
| |
| ahci_sg++; |
| n_sg++; |
| } |
| |
| return n_sg; |
| } |
| |
| static void ahci_qc_prep(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| int is_atapi = is_atapi_taskfile(&qc->tf); |
| void *cmd_tbl; |
| u32 opts; |
| const u32 cmd_fis_len = 5; /* five dwords */ |
| unsigned int n_elem; |
| |
| /* |
| * Fill in command table information. First, the header, |
| * a SATA Register - Host to Device command FIS. |
| */ |
| cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; |
| |
| ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); |
| if (is_atapi) { |
| memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); |
| memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); |
| } |
| |
| n_elem = 0; |
| if (qc->flags & ATA_QCFLAG_DMAMAP) |
| n_elem = ahci_fill_sg(qc, cmd_tbl); |
| |
| /* |
| * Fill in command slot information. |
| */ |
| opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); |
| if (qc->tf.flags & ATA_TFLAG_WRITE) |
| opts |= AHCI_CMD_WRITE; |
| if (is_atapi) |
| opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; |
| |
| ahci_fill_cmd_slot(pp, qc->tag, opts); |
| } |
| |
| static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) |
| { |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ata_eh_info *host_ehi = &ap->link.eh_info; |
| struct ata_link *link = NULL; |
| struct ata_queued_cmd *active_qc; |
| struct ata_eh_info *active_ehi; |
| u32 serror; |
| |
| /* determine active link */ |
| ata_port_for_each_link(link, ap) |
| if (ata_link_active(link)) |
| break; |
| if (!link) |
| link = &ap->link; |
| |
| active_qc = ata_qc_from_tag(ap, link->active_tag); |
| active_ehi = &link->eh_info; |
| |
| /* record irq stat */ |
| ata_ehi_clear_desc(host_ehi); |
| ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); |
| |
| /* AHCI needs SError cleared; otherwise, it might lock up */ |
| ahci_scr_read(ap, SCR_ERROR, &serror); |
| ahci_scr_write(ap, SCR_ERROR, serror); |
| host_ehi->serror |= serror; |
| |
| /* some controllers set IRQ_IF_ERR on device errors, ignore it */ |
| if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) |
| irq_stat &= ~PORT_IRQ_IF_ERR; |
| |
| if (irq_stat & PORT_IRQ_TF_ERR) { |
| /* If qc is active, charge it; otherwise, the active |
| * link. There's no active qc on NCQ errors. It will |
| * be determined by EH by reading log page 10h. |
| */ |
| if (active_qc) |
| active_qc->err_mask |= AC_ERR_DEV; |
| else |
| active_ehi->err_mask |= AC_ERR_DEV; |
| |
| if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) |
| host_ehi->serror &= ~SERR_INTERNAL; |
| } |
| |
| if (irq_stat & PORT_IRQ_UNK_FIS) { |
| u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); |
| |
| active_ehi->err_mask |= AC_ERR_HSM; |
| active_ehi->action |= ATA_EH_SOFTRESET; |
| ata_ehi_push_desc(active_ehi, |
| "unknown FIS %08x %08x %08x %08x" , |
| unk[0], unk[1], unk[2], unk[3]); |
| } |
| |
| if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) { |
| active_ehi->err_mask |= AC_ERR_HSM; |
| active_ehi->action |= ATA_EH_SOFTRESET; |
| ata_ehi_push_desc(active_ehi, "incorrect PMP"); |
| } |
| |
| if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { |
| host_ehi->err_mask |= AC_ERR_HOST_BUS; |
| host_ehi->action |= ATA_EH_SOFTRESET; |
| ata_ehi_push_desc(host_ehi, "host bus error"); |
| } |
| |
| if (irq_stat & PORT_IRQ_IF_ERR) { |
| host_ehi->err_mask |= AC_ERR_ATA_BUS; |
| host_ehi->action |= ATA_EH_SOFTRESET; |
| ata_ehi_push_desc(host_ehi, "interface fatal error"); |
| } |
| |
| if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { |
| ata_ehi_hotplugged(host_ehi); |
| ata_ehi_push_desc(host_ehi, "%s", |
| irq_stat & PORT_IRQ_CONNECT ? |
| "connection status changed" : "PHY RDY changed"); |
| } |
| |
| /* okay, let's hand over to EH */ |
| |
| if (irq_stat & PORT_IRQ_FREEZE) |
| ata_port_freeze(ap); |
| else |
| ata_port_abort(ap); |
| } |
| |
| static void ahci_port_intr(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ap->ioaddr.cmd_addr; |
| struct ata_eh_info *ehi = &ap->link.eh_info; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); |
| u32 status, qc_active; |
| int rc, known_irq = 0; |
| |
| status = readl(port_mmio + PORT_IRQ_STAT); |
| writel(status, port_mmio + PORT_IRQ_STAT); |
| |
| /* ignore BAD_PMP while resetting */ |
| if (unlikely(resetting)) |
| status &= ~PORT_IRQ_BAD_PMP; |
| |
| if (unlikely(status & PORT_IRQ_ERROR)) { |
| ahci_error_intr(ap, status); |
| return; |
| } |
| |
| if (status & PORT_IRQ_SDB_FIS) { |
| /* If SNotification is available, leave notification |
| * handling to sata_async_notification(). If not, |
| * emulate it by snooping SDB FIS RX area. |
| * |
| * Snooping FIS RX area is probably cheaper than |
| * poking SNotification but some constrollers which |
| * implement SNotification, ICH9 for example, don't |
| * store AN SDB FIS into receive area. |
| */ |
| if (hpriv->cap & HOST_CAP_SNTF) |
| sata_async_notification(ap); |
| else { |
| /* If the 'N' bit in word 0 of the FIS is set, |
| * we just received asynchronous notification. |
| * Tell libata about it. |
| */ |
| const __le32 *f = pp->rx_fis + RX_FIS_SDB; |
| u32 f0 = le32_to_cpu(f[0]); |
| |
| if (f0 & (1 << 15)) |
| sata_async_notification(ap); |
| } |
| } |
| |
| /* pp->active_link is valid iff any command is in flight */ |
| if (ap->qc_active && pp->active_link->sactive) |
| qc_active = readl(port_mmio + PORT_SCR_ACT); |
| else |
| qc_active = readl(port_mmio + PORT_CMD_ISSUE); |
| |
| rc = ata_qc_complete_multiple(ap, qc_active, NULL); |
| |
| /* If resetting, spurious or invalid completions are expected, |
| * return unconditionally. |
| */ |
| if (resetting) |
| return; |
| |
| if (rc > 0) |
| return; |
| if (rc < 0) { |
| ehi->err_mask |= AC_ERR_HSM; |
| ehi->action |= ATA_EH_SOFTRESET; |
| ata_port_freeze(ap); |
| return; |
| } |
| |
| /* hmmm... a spurious interrupt */ |
| |
| /* if !NCQ, ignore. No modern ATA device has broken HSM |
| * implementation for non-NCQ commands. |
| */ |
| if (!ap->link.sactive) |
| return; |
| |
| if (status & PORT_IRQ_D2H_REG_FIS) { |
| if (!pp->ncq_saw_d2h) |
| ata_port_printk(ap, KERN_INFO, |
| "D2H reg with I during NCQ, " |
| "this message won't be printed again\n"); |
| pp->ncq_saw_d2h = 1; |
| known_irq = 1; |
| } |
| |
| if (status & PORT_IRQ_DMAS_FIS) { |
| if (!pp->ncq_saw_dmas) |
| ata_port_printk(ap, KERN_INFO, |
| "DMAS FIS during NCQ, " |
| "this message won't be printed again\n"); |
| pp->ncq_saw_dmas = 1; |
| known_irq = 1; |
| } |
| |
| if (status & PORT_IRQ_SDB_FIS) { |
| const __le32 *f = pp->rx_fis + RX_FIS_SDB; |
| |
| if (le32_to_cpu(f[1])) { |
| /* SDB FIS containing spurious completions |
| * might be dangerous, whine and fail commands |
| * with HSM violation. EH will turn off NCQ |
| * after several such failures. |
| */ |
| ata_ehi_push_desc(ehi, |
| "spurious completions during NCQ " |
| "issue=0x%x SAct=0x%x FIS=%08x:%08x", |
| readl(port_mmio + PORT_CMD_ISSUE), |
| readl(port_mmio + PORT_SCR_ACT), |
| le32_to_cpu(f[0]), le32_to_cpu(f[1])); |
| ehi->err_mask |= AC_ERR_HSM; |
| ehi->action |= ATA_EH_SOFTRESET; |
| ata_port_freeze(ap); |
| } else { |
| if (!pp->ncq_saw_sdb) |
| ata_port_printk(ap, KERN_INFO, |
| "spurious SDB FIS %08x:%08x during NCQ, " |
| "this message won't be printed again\n", |
| le32_to_cpu(f[0]), le32_to_cpu(f[1])); |
| pp->ncq_saw_sdb = 1; |
| } |
| known_irq = 1; |
| } |
| |
| if (!known_irq) |
| ata_port_printk(ap, KERN_INFO, "spurious interrupt " |
| "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n", |
| status, ap->link.active_tag, ap->link.sactive); |
| } |
| |
| static void ahci_irq_clear(struct ata_port *ap) |
| { |
| /* TODO */ |
| } |
| |
| static irqreturn_t ahci_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| struct ahci_host_priv *hpriv; |
| unsigned int i, handled = 0; |
| void __iomem *mmio; |
| u32 irq_stat, irq_ack = 0; |
| |
| VPRINTK("ENTER\n"); |
| |
| hpriv = host->private_data; |
| mmio = host->iomap[AHCI_PCI_BAR]; |
| |
| /* sigh. 0xffffffff is a valid return from h/w */ |
| irq_stat = readl(mmio + HOST_IRQ_STAT); |
| irq_stat &= hpriv->port_map; |
| if (!irq_stat) |
| return IRQ_NONE; |
| |
| spin_lock(&host->lock); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap; |
| |
| if (!(irq_stat & (1 << i))) |
| continue; |
| |
| ap = host->ports[i]; |
| if (ap) { |
| ahci_port_intr(ap); |
| VPRINTK("port %u\n", i); |
| } else { |
| VPRINTK("port %u (no irq)\n", i); |
| if (ata_ratelimit()) |
| dev_printk(KERN_WARNING, host->dev, |
| "interrupt on disabled port %u\n", i); |
| } |
| |
| irq_ack |= (1 << i); |
| } |
| |
| if (irq_ack) { |
| writel(irq_ack, mmio + HOST_IRQ_STAT); |
| handled = 1; |
| } |
| |
| spin_unlock(&host->lock); |
| |
| VPRINTK("EXIT\n"); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| |
| /* Keep track of the currently active link. It will be used |
| * in completion path to determine whether NCQ phase is in |
| * progress. |
| */ |
| pp->active_link = qc->dev->link; |
| |
| if (qc->tf.protocol == ATA_PROT_NCQ) |
| writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); |
| writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); |
| readl(port_mmio + PORT_CMD_ISSUE); /* flush */ |
| |
| return 0; |
| } |
| |
| static void ahci_freeze(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| |
| /* turn IRQ off */ |
| writel(0, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static void ahci_thaw(struct ata_port *ap) |
| { |
| void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| u32 tmp; |
| struct ahci_port_priv *pp = ap->private_data; |
| |
| /* clear IRQ */ |
| tmp = readl(port_mmio + PORT_IRQ_STAT); |
| writel(tmp, port_mmio + PORT_IRQ_STAT); |
| writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); |
| |
| /* turn IRQ back on */ |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static void ahci_error_handler(struct ata_port *ap) |
| { |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) { |
| /* restart engine */ |
| ahci_stop_engine(ap); |
| ahci_start_engine(ap); |
| } |
| |
| /* perform recovery */ |
| sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset, |
| ahci_hardreset, ahci_postreset, |
| sata_pmp_std_prereset, ahci_pmp_softreset, |
| sata_pmp_std_hardreset, sata_pmp_std_postreset); |
| } |
| |
| static void ahci_vt8251_error_handler(struct ata_port *ap) |
| { |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) { |
| /* restart engine */ |
| ahci_stop_engine(ap); |
| ahci_start_engine(ap); |
| } |
| |
| /* perform recovery */ |
| ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset, |
| ahci_postreset); |
| } |
| |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) |
| { |
| struct ata_port *ap = qc->ap; |
| |
| /* make DMA engine forget about the failed command */ |
| if (qc->flags & ATA_QCFLAG_FAILED) |
| ahci_kick_engine(ap, 1); |
| } |
| |
| static void ahci_pmp_attach(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 cmd; |
| |
| cmd = readl(port_mmio + PORT_CMD); |
| cmd |= PORT_CMD_PMP; |
| writel(cmd, port_mmio + PORT_CMD); |
| |
| pp->intr_mask |= PORT_IRQ_BAD_PMP; |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static void ahci_pmp_detach(struct ata_port *ap) |
| { |
| void __iomem *port_mmio = ahci_port_base(ap); |
| struct ahci_port_priv *pp = ap->private_data; |
| u32 cmd; |
| |
| cmd = readl(port_mmio + PORT_CMD); |
| cmd &= ~PORT_CMD_PMP; |
| writel(cmd, port_mmio + PORT_CMD); |
| |
| pp->intr_mask &= ~PORT_IRQ_BAD_PMP; |
| writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
| } |
| |
| static int ahci_port_resume(struct ata_port *ap) |
| { |
| ahci_power_up(ap); |
| ahci_start_port(ap); |
| |
| if (ap->nr_pmp_links) |
| ahci_pmp_attach(ap); |
| else |
| ahci_pmp_detach(ap); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) |
| { |
| const char *emsg = NULL; |
| int rc; |
| |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc == 0) |
| ahci_power_down(ap); |
| else { |
| ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); |
| ahci_start_port(ap); |
| } |
| |
| return rc; |
| } |
| |
| static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) |
| { |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| u32 ctl; |
| |
| if (mesg.event == PM_EVENT_SUSPEND) { |
| /* AHCI spec rev1.1 section 8.3.3: |
| * Software must disable interrupts prior to requesting a |
| * transition of the HBA to D3 state. |
| */ |
| ctl = readl(mmio + HOST_CTL); |
| ctl &= ~HOST_IRQ_EN; |
| writel(ctl, mmio + HOST_CTL); |
| readl(mmio + HOST_CTL); /* flush */ |
| } |
| |
| return ata_pci_device_suspend(pdev, mesg); |
| } |
| |
| static int ahci_pci_device_resume(struct pci_dev *pdev) |
| { |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); |
| int rc; |
| |
| rc = ata_pci_device_do_resume(pdev); |
| if (rc) |
| return rc; |
| |
| if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { |
| rc = ahci_reset_controller(host); |
| if (rc) |
| return rc; |
| |
| ahci_init_controller(host); |
| } |
| |
| ata_host_resume(host); |
| |
| return 0; |
| } |
| #endif |
| |
| static int ahci_port_start(struct ata_port *ap) |
| { |
| struct device *dev = ap->host->dev; |
| struct ahci_port_priv *pp; |
| void *mem; |
| dma_addr_t mem_dma; |
| int rc; |
| |
| pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); |
| if (!pp) |
| return -ENOMEM; |
| |
| rc = ata_pad_alloc(ap, dev); |
| if (rc) |
| return rc; |
| |
| mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, |
| GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); |
| |
| /* |
| * First item in chunk of DMA memory: 32-slot command table, |
| * 32 bytes each in size |
| */ |
| pp->cmd_slot = mem; |
| pp->cmd_slot_dma = mem_dma; |
| |
| mem += AHCI_CMD_SLOT_SZ; |
| mem_dma += AHCI_CMD_SLOT_SZ; |
| |
| /* |
| * Second item: Received-FIS area |
| */ |
| pp->rx_fis = mem; |
| pp->rx_fis_dma = mem_dma; |
| |
| mem += AHCI_RX_FIS_SZ; |
| mem_dma += AHCI_RX_FIS_SZ; |
| |
| /* |
| * Third item: data area for storing a single command |
| * and its scatter-gather table |
| */ |
| pp->cmd_tbl = mem; |
| pp->cmd_tbl_dma = mem_dma; |
| |
| /* |
| * Save off initial list of interrupts to be enabled. |
| * This could be changed later |
| */ |
| pp->intr_mask = DEF_PORT_IRQ; |
| |
| ap->private_data = pp; |
| |
| /* engage engines, captain */ |
| return ahci_port_resume(ap); |
| } |
| |
| static void ahci_port_stop(struct ata_port *ap) |
| { |
| const char *emsg = NULL; |
| int rc; |
| |
| /* de-initialize port */ |
| rc = ahci_deinit_port(ap, &emsg); |
| if (rc) |
| ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); |
| } |
| |
| static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) |
| { |
| int rc; |
| |
| if (using_dac && |
| !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { |
| rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); |
| if (rc) { |
| rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); |
| if (rc) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "64-bit DMA enable failed\n"); |
| return rc; |
| } |
| } |
| } else { |
| rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); |
| if (rc) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "32-bit DMA enable failed\n"); |
| return rc; |
| } |
| rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); |
| if (rc) { |
| dev_printk(KERN_ERR, &pdev->dev, |
| "32-bit consistent DMA enable failed\n"); |
| return rc; |
| } |
| } |
| return 0; |
| } |
| |
| static void ahci_print_info(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; |
| u32 vers, cap, impl, speed; |
| const char *speed_s; |
| u16 cc; |
| const char *scc_s; |
| |
| vers = readl(mmio + HOST_VERSION); |
| cap = hpriv->cap; |
| impl = hpriv->port_map; |
| |
| speed = (cap >> 20) & 0xf; |
| if (speed == 1) |
| speed_s = "1.5"; |
| else if (speed == 2) |
| speed_s = "3"; |
| else |
| speed_s = "?"; |
| |
| pci_read_config_word(pdev, 0x0a, &cc); |
| if (cc == PCI_CLASS_STORAGE_IDE) |
| scc_s = "IDE"; |
| else if (cc == PCI_CLASS_STORAGE_SATA) |
| scc_s = "SATA"; |
| else if (cc == PCI_CLASS_STORAGE_RAID) |
| scc_s = "RAID"; |
| else |
| scc_s = "unknown"; |
| |
| dev_printk(KERN_INFO, &pdev->dev, |
| "AHCI %02x%02x.%02x%02x " |
| "%u slots %u ports %s Gbps 0x%x impl %s mode\n" |
| , |
| |
| (vers >> 24) & 0xff, |
| (vers >> 16) & 0xff, |
| (vers >> 8) & 0xff, |
| vers & 0xff, |
| |
| ((cap >> 8) & 0x1f) + 1, |
| (cap & 0x1f) + 1, |
| speed_s, |
| impl, |
| scc_s); |
| |
| dev_printk(KERN_INFO, &pdev->dev, |
| "flags: " |
| "%s%s%s%s%s%s%s" |
| "%s%s%s%s%s%s%s\n" |
| , |
| |
| cap & (1 << 31) ? "64bit " : "", |
| cap & (1 << 30) ? "ncq " : "", |
| cap & (1 << 29) ? "sntf " : "", |
| cap & (1 << 28) ? "ilck " : "", |
| cap & (1 << 27) ? "stag " : "", |
| cap & (1 << 26) ? "pm " : "", |
| cap & (1 << 25) ? "led " : "", |
| |
| cap & (1 << 24) ? "clo " : "", |
| cap & (1 << 19) ? "nz " : "", |
| cap & (1 << 18) ? "only " : "", |
| cap & (1 << 17) ? "pmp " : "", |
| cap & (1 << 15) ? "pio " : "", |
| cap & (1 << 14) ? "slum " : "", |
| cap & (1 << 13) ? "part " : "" |
| ); |
| } |
| |
| static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static int printed_version; |
| struct ata_port_info pi = ahci_port_info[ent->driver_data]; |
| const struct ata_port_info *ppi[] = { &pi, NULL }; |
| struct device *dev = &pdev->dev; |
| struct ahci_host_priv *hpriv; |
| struct ata_host *host; |
| int i, rc; |
| |
| VPRINTK("ENTER\n"); |
| |
| WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); |
| |
| if (!printed_version++) |
| dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); |
| |
| /* acquire resources */ |
| rc = pcim_enable_device(pdev); |
| if (rc) |
| return rc; |
| |
| rc = pcim_iomap_regions(pdev, 1 << AHCI_PCI_BAR, DRV_NAME); |
| if (rc == -EBUSY) |
| pcim_pin_device(pdev); |
| if (rc) |
| return rc; |
| |
| hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); |
| if (!hpriv) |
| return -ENOMEM; |
| hpriv->flags |= (unsigned long)pi.private_data; |
| |
| if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) |
| pci_intx(pdev, 1); |
| |
| /* save initial config */ |
| ahci_save_initial_config(pdev, hpriv); |
| |
| /* prepare host */ |
| if (hpriv->cap & HOST_CAP_NCQ) |
| pi.flags |= ATA_FLAG_NCQ; |
| |
| if (hpriv->cap & HOST_CAP_PMP) |
| pi.flags |= ATA_FLAG_PMP; |
| |
| host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map)); |
| if (!host) |
| return -ENOMEM; |
| host->iomap = pcim_iomap_table(pdev); |
| host->private_data = hpriv; |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| void __iomem *port_mmio = ahci_port_base(ap); |
| |
| ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); |
| ata_port_pbar_desc(ap, AHCI_PCI_BAR, |
| 0x100 + ap->port_no * 0x80, "port"); |
| |
| /* standard SATA port setup */ |
| if (hpriv->port_map & (1 << i)) |
| ap->ioaddr.cmd_addr = port_mmio; |
| |
| /* disabled/not-implemented port */ |
| else |
| ap->ops = &ata_dummy_port_ops; |
| } |
| |
| /* initialize adapter */ |
| rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); |
| if (rc) |
| return rc; |
| |
| rc = ahci_reset_controller(host); |
| if (rc) |
| return rc; |
| |
| ahci_init_controller(host); |
| ahci_print_info(host); |
| |
| pci_set_master(pdev); |
| return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED, |
| &ahci_sht); |
| } |
| |
| static int __init ahci_init(void) |
| { |
| return pci_register_driver(&ahci_pci_driver); |
| } |
| |
| static void __exit ahci_exit(void) |
| { |
| pci_unregister_driver(&ahci_pci_driver); |
| } |
| |
| |
| MODULE_AUTHOR("Jeff Garzik"); |
| MODULE_DESCRIPTION("AHCI SATA low-level driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); |
| MODULE_VERSION(DRV_VERSION); |
| |
| module_init(ahci_init); |
| module_exit(ahci_exit); |