[SCSI] bnx2i: Fixed the TCP graceful termination initiation
In compliance to RFC793, a TCP graceful termination will be used
instead of an abortive termination for the case where the remote
has initiated the close of the connection.
Additionally, a TCP abortive termination will be used to close the
connection when a logout response is not received in time after a
logout request has been initiated.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 69febb6..00c0335 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -639,6 +639,8 @@
EP_STATE_CLEANUP_CMPL = 0x800,
EP_STATE_TCP_FIN_RCVD = 0x1000,
EP_STATE_TCP_RST_RCVD = 0x2000,
+ EP_STATE_LOGOUT_SENT = 0x4000,
+ EP_STATE_LOGOUT_RESP_RCVD = 0x8000,
EP_STATE_PG_OFLD_FAILED = 0x1000000,
EP_STATE_ULP_UPDATE_FAILED = 0x2000000,
EP_STATE_CLEANUP_FAILED = 0x4000000,
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 3a66ca2..d23fc25 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -562,6 +562,8 @@
logout_wqe->num_bds = 1;
logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+ bnx2i_conn->ep->state = EP_STATE_LOGOUT_SENT;
+
bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
return 0;
}
@@ -1482,6 +1484,8 @@
resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+
+ bnx2i_conn->ep->state = EP_STATE_LOGOUT_RESP_RCVD;
done:
spin_unlock(&session->lock);
return 0;
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f6eebb3..c66c5a4 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1890,6 +1890,8 @@
case EP_STATE_ULP_UPDATE_START:
case EP_STATE_ULP_UPDATE_COMPL:
case EP_STATE_TCP_FIN_RCVD:
+ case EP_STATE_LOGOUT_SENT:
+ case EP_STATE_LOGOUT_RESP_RCVD:
case EP_STATE_ULP_UPDATE_FAILED:
ret = 1;
break;
@@ -1923,6 +1925,8 @@
struct iscsi_session *session = NULL;
struct iscsi_conn *conn = NULL;
int ret = 0;
+ int close = 0;
+ int close_ret = 0;
if (!hba)
return 0;
@@ -1939,33 +1943,44 @@
session = conn->session;
}
- bnx2i_ep->state = EP_STATE_DISCONN_START;
-
init_timer(&bnx2i_ep->ofld_timer);
bnx2i_ep->ofld_timer.expires = hba->conn_teardown_tmo + jiffies;
bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
add_timer(&bnx2i_ep->ofld_timer);
- if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
- int close = 0;
- int close_ret = 0;
-
- if (session) {
- spin_lock_bh(&session->lock);
- if (session->state == ISCSI_STATE_LOGGING_OUT)
- close = 1;
- spin_unlock_bh(&session->lock);
- }
- if (close)
- close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
- else
- close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
- if (close_ret)
- bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
- } else
+ if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
goto out;
+ if (session) {
+ spin_lock_bh(&session->lock);
+ if (bnx2i_ep->state != EP_STATE_TCP_FIN_RCVD) {
+ if (session->state == ISCSI_STATE_LOGGING_OUT) {
+ if (bnx2i_ep->state == EP_STATE_LOGOUT_SENT) {
+ /* Logout sent, but no resp */
+ printk(KERN_ALERT "bnx2i - WARNING "
+ "logout response was not "
+ "received!\n");
+ } else if (bnx2i_ep->state ==
+ EP_STATE_LOGOUT_RESP_RCVD)
+ close = 1;
+ }
+ } else
+ close = 1;
+
+ spin_unlock_bh(&session->lock);
+ }
+
+ bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+ if (close)
+ close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
+ else
+ close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
+
+ if (close_ret)
+ bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
+
/* wait for option-2 conn teardown */
wait_event_interruptible(bnx2i_ep->ofld_wait,
bnx2i_ep->state != EP_STATE_DISCONN_START);