# arch/arm/mach-exynos4/Kconfig
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
#		http://www.samsung.com/
#
# Licensed under GPLv2

# Configuration options for the EXYNOS4

if ARCH_EXYNOS4

config CPU_EXYNOS4210
	bool
	select S3C_PL330_DMA
	help
	  Enable EXYNOS4210 CPU support

config EXYNOS4_MCT
	bool "Kernel timer support by MCT"
	help
	  Use MCT (Multi Core Timer) as kernel timers

config EXYNOS4_DEV_AHCI
	bool
	help
	  Compile in platform device definitions for AHCI

config EXYNOS4_DEV_PD
	bool
	help
	  Compile in platform device definitions for Power Domain

config EXYNOS4_DEV_SYSMMU
	bool
	help
	  Common setup code for SYSTEM MMU in EXYNOS4

config EXYNOS4_SETUP_I2C1
	bool
	help
	  Common setup code for i2c bus 1.

config EXYNOS4_SETUP_I2C2
	bool
	help
	  Common setup code for i2c bus 2.

config EXYNOS4_SETUP_I2C3
	bool
	help
	  Common setup code for i2c bus 3.

config EXYNOS4_SETUP_I2C4
	bool
	help
	  Common setup code for i2c bus 4.

config EXYNOS4_SETUP_I2C5
	bool
	help
	  Common setup code for i2c bus 5.

config EXYNOS4_SETUP_I2C6
	bool
	help
	  Common setup code for i2c bus 6.

config EXYNOS4_SETUP_I2C7
	bool
	help
	  Common setup code for i2c bus 7.

config EXYNOS4_SETUP_KEYPAD
	bool
	help
	  Common setup code for keypad.

config EXYNOS4_SETUP_SDHCI
	bool
	select EXYNOS4_SETUP_SDHCI_GPIO
	help
	  Internal helper functions for EXYNOS4 based SDHCI systems.

config EXYNOS4_SETUP_SDHCI_GPIO
	bool
	help
	  Common setup code for SDHCI gpio.

config EXYNOS4_SETUP_FIMC
	bool
	help
	  Common setup code for the camera interfaces.

config EXYNOS4_SETUP_USB_PHY
	bool
	help
	  Common setup code for USB PHY controller

# machine support

menu "EXYNOS4 Machines"

config MACH_SMDKC210
	bool "SMDKC210"
	select CPU_EXYNOS4210
	select S3C_DEV_RTC
	select S3C_DEV_WDT
	select S3C_DEV_I2C1
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_HSMMC2
	select S3C_DEV_HSMMC3
	select EXYNOS4_DEV_PD
	select EXYNOS4_DEV_SYSMMU
	select EXYNOS4_SETUP_I2C1
	select EXYNOS4_SETUP_SDHCI
	help
	  Machine support for Samsung SMDKC210

config MACH_SMDKV310
	bool "SMDKV310"
	select CPU_EXYNOS4210
	select S3C_DEV_RTC
	select S3C_DEV_WDT
	select S3C_DEV_I2C1
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_HSMMC2
	select S3C_DEV_HSMMC3
	select SAMSUNG_DEV_KEYPAD
	select EXYNOS4_DEV_PD
	select EXYNOS4_DEV_SYSMMU
	select EXYNOS4_SETUP_I2C1
	select EXYNOS4_SETUP_KEYPAD
	select EXYNOS4_SETUP_SDHCI
	help
	  Machine support for Samsung SMDKV310

config MACH_ARMLEX4210
	bool "ARMLEX4210"
	select CPU_EXYNOS4210
	select S3C_DEV_RTC
	select S3C_DEV_WDT
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC2
	select S3C_DEV_HSMMC3
	select EXYNOS4_DEV_AHCI
	select EXYNOS4_DEV_SYSMMU
	select EXYNOS4_SETUP_SDHCI
	help
	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210

config MACH_UNIVERSAL_C210
	bool "Mobile UNIVERSAL_C210 Board"
	select CPU_EXYNOS4210
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC2
	select S3C_DEV_HSMMC3
	select S3C_DEV_I2C1
	select S3C_DEV_I2C5
	select S5P_DEV_ONENAND
	select EXYNOS4_SETUP_I2C1
	select EXYNOS4_SETUP_I2C5
	select EXYNOS4_SETUP_SDHCI
	help
	  Machine support for Samsung Mobile Universal S5PC210 Reference
	  Board.

config MACH_NURI
	bool "Mobile NURI Board"
	select CPU_EXYNOS4210
	select S3C_DEV_WDT
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC2
	select S3C_DEV_HSMMC3
	select S3C_DEV_I2C1
	select S3C_DEV_I2C3
	select S3C_DEV_I2C5
	select S5P_DEV_USB_EHCI
	select EXYNOS4_SETUP_I2C1
	select EXYNOS4_SETUP_I2C3
	select EXYNOS4_SETUP_I2C5
	select EXYNOS4_SETUP_SDHCI
	select EXYNOS4_SETUP_USB_PHY
	select SAMSUNG_DEV_PWM
	help
	  Machine support for Samsung Mobile NURI Board.

endmenu

comment "Configuration for HSMMC bus width"

menu "Use 8-bit bus width"

config EXYNOS4_SDHCI_CH0_8BIT
	bool "Channel 0 with 8-bit bus"
	help
	  Support HSMMC Channel 0 8-bit bus.
	  If selected, Channel 1 is disabled.

config EXYNOS4_SDHCI_CH2_8BIT
	bool "Channel 2 with 8-bit bus"
	help
	  Support HSMMC Channel 2 8-bit bus.
	  If selected, Channel 3 is disabled.

endmenu

endif