| /* |
| * This file is part of wl1251 |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Contact: Kalle Valo <kalle.valo@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include "wl1251_init.h" |
| #include "wl12xx_80211.h" |
| #include "wl1251_acx.h" |
| #include "wl1251_cmd.h" |
| #include "wl1251_reg.h" |
| |
| int wl1251_hw_init_hwenc_config(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_feature_cfg(wl); |
| if (ret < 0) { |
| wl1251_warning("couldn't set feature config"); |
| return ret; |
| } |
| |
| ret = wl1251_acx_default_key(wl, wl->default_key); |
| if (ret < 0) { |
| wl1251_warning("couldn't set default key"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_templates_config(struct wl1251 *wl) |
| { |
| int ret; |
| u8 partial_vbm[PARTIAL_VBM_MAX]; |
| |
| /* send empty templates for fw memory reservation */ |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, NULL, |
| sizeof(struct wl12xx_probe_req_template)); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, NULL, |
| sizeof(struct wl12xx_null_data_template)); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, NULL, |
| sizeof(struct wl12xx_ps_poll_template)); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL, |
| sizeof |
| (struct wl12xx_qos_null_data_template)); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, NULL, |
| sizeof |
| (struct wl12xx_probe_resp_template)); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_template_set(wl, CMD_BEACON, NULL, |
| sizeof |
| (struct wl12xx_beacon_template)); |
| if (ret < 0) |
| return ret; |
| |
| /* tim templates, first reserve space then allocate an empty one */ |
| memset(partial_vbm, 0, PARTIAL_VBM_MAX); |
| ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter) |
| { |
| int ret; |
| |
| ret = wl1251_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_rx_config(wl, config, filter); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_phy_config(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_pd_threshold(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_slot(wl, DEFAULT_SLOT_TIME); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_group_address_tbl(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_service_period_timeout(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_rts_threshold(wl, RTS_THRESHOLD_DEF); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_beacon_filter(struct wl1251 *wl) |
| { |
| int ret; |
| |
| /* disable beacon filtering at this stage */ |
| ret = wl1251_acx_beacon_filter_opt(wl, false); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_beacon_filter_table(wl); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_pta(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_sg_enable(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1251_acx_sg_cfg(wl); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_energy_detection(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_cca_threshold(wl); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_bcn_dtim_options(wl); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int wl1251_hw_init_power_auth(struct wl1251 *wl) |
| { |
| return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM); |
| } |
| |
| int wl1251_hw_init_mem_config(struct wl1251 *wl) |
| { |
| int ret; |
| |
| ret = wl1251_acx_mem_cfg(wl); |
| if (ret < 0) |
| return ret; |
| |
| wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), |
| GFP_KERNEL); |
| if (!wl->target_mem_map) { |
| wl1251_error("couldn't allocate target memory map"); |
| return -ENOMEM; |
| } |
| |
| /* we now ask for the firmware built memory map */ |
| ret = wl1251_acx_mem_map(wl, wl->target_mem_map, |
| sizeof(struct wl1251_acx_mem_map)); |
| if (ret < 0) { |
| wl1251_error("couldn't retrieve firmware memory map"); |
| kfree(wl->target_mem_map); |
| wl->target_mem_map = NULL; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int wl1251_hw_init_txq_fill(u8 qid, |
| struct acx_tx_queue_qos_config *config, |
| u32 num_blocks) |
| { |
| config->qid = qid; |
| |
| switch (qid) { |
| case QOS_AC_BE: |
| config->high_threshold = |
| (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; |
| config->low_threshold = |
| (QOS_TX_LOW_BE_DEF * num_blocks) / 100; |
| break; |
| case QOS_AC_BK: |
| config->high_threshold = |
| (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; |
| config->low_threshold = |
| (QOS_TX_LOW_BK_DEF * num_blocks) / 100; |
| break; |
| case QOS_AC_VI: |
| config->high_threshold = |
| (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; |
| config->low_threshold = |
| (QOS_TX_LOW_VI_DEF * num_blocks) / 100; |
| break; |
| case QOS_AC_VO: |
| config->high_threshold = |
| (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; |
| config->low_threshold = |
| (QOS_TX_LOW_VO_DEF * num_blocks) / 100; |
| break; |
| default: |
| wl1251_error("Invalid TX queue id: %d", qid); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl) |
| { |
| struct acx_tx_queue_qos_config *config; |
| struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; |
| int ret, i; |
| |
| wl1251_debug(DEBUG_ACX, "acx tx queue config"); |
| |
| config = kzalloc(sizeof(*config), GFP_KERNEL); |
| if (!config) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| for (i = 0; i < MAX_NUM_OF_AC; i++) { |
| ret = wl1251_hw_init_txq_fill(i, config, |
| wl_mem_map->num_tx_mem_blocks); |
| if (ret < 0) |
| goto out; |
| |
| ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG, |
| config, sizeof(*config)); |
| if (ret < 0) |
| goto out; |
| } |
| |
| wl1251_acx_ac_cfg(wl, AC_BE, CWMIN_BE, CWMAX_BE, AIFS_DIFS, TXOP_BE); |
| wl1251_acx_ac_cfg(wl, AC_BK, CWMIN_BK, CWMAX_BK, AIFS_DIFS, TXOP_BK); |
| wl1251_acx_ac_cfg(wl, AC_VI, CWMIN_VI, CWMAX_VI, AIFS_DIFS, TXOP_VI); |
| wl1251_acx_ac_cfg(wl, AC_VO, CWMIN_VO, CWMAX_VO, AIFS_DIFS, TXOP_VO); |
| |
| out: |
| kfree(config); |
| return ret; |
| } |
| |
| static int wl1251_hw_init_data_path_config(struct wl1251 *wl) |
| { |
| int ret; |
| |
| /* asking for the data path parameters */ |
| wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), |
| GFP_KERNEL); |
| if (!wl->data_path) { |
| wl1251_error("Couldnt allocate data path parameters"); |
| return -ENOMEM; |
| } |
| |
| ret = wl1251_acx_data_path_params(wl, wl->data_path); |
| if (ret < 0) { |
| kfree(wl->data_path); |
| wl->data_path = NULL; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| int wl1251_hw_init(struct wl1251 *wl) |
| { |
| struct wl1251_acx_mem_map *wl_mem_map; |
| int ret; |
| |
| ret = wl1251_hw_init_hwenc_config(wl); |
| if (ret < 0) |
| return ret; |
| |
| /* Template settings */ |
| ret = wl1251_hw_init_templates_config(wl); |
| if (ret < 0) |
| return ret; |
| |
| /* Default memory configuration */ |
| ret = wl1251_hw_init_mem_config(wl); |
| if (ret < 0) |
| return ret; |
| |
| /* Default data path configuration */ |
| ret = wl1251_hw_init_data_path_config(wl); |
| if (ret < 0) |
| goto out_free_memmap; |
| |
| /* RX config */ |
| ret = wl1251_hw_init_rx_config(wl, |
| RX_CFG_PROMISCUOUS | RX_CFG_TSF, |
| RX_FILTER_OPTION_DEF); |
| /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, |
| RX_FILTER_OPTION_FILTER_ALL); */ |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* TX queues config */ |
| ret = wl1251_hw_init_tx_queue_config(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* PHY layer config */ |
| ret = wl1251_hw_init_phy_config(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Initialize connection monitoring thresholds */ |
| ret = wl1251_acx_conn_monit_params(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Beacon filtering */ |
| ret = wl1251_hw_init_beacon_filter(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Bluetooth WLAN coexistence */ |
| ret = wl1251_hw_init_pta(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Energy detection */ |
| ret = wl1251_hw_init_energy_detection(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Beacons and boradcast settings */ |
| ret = wl1251_hw_init_beacon_broadcast(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Enable data path */ |
| ret = wl1251_cmd_data_path(wl, wl->channel, 1); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| /* Default power state */ |
| ret = wl1251_hw_init_power_auth(wl); |
| if (ret < 0) |
| goto out_free_data_path; |
| |
| wl_mem_map = wl->target_mem_map; |
| wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", |
| wl_mem_map->num_tx_mem_blocks, |
| wl->data_path->tx_control_addr, |
| wl_mem_map->num_rx_mem_blocks, |
| wl->data_path->rx_control_addr); |
| |
| return 0; |
| |
| out_free_data_path: |
| kfree(wl->data_path); |
| |
| out_free_memmap: |
| kfree(wl->target_mem_map); |
| |
| return ret; |
| } |