ixgbe: Update link setup code to better support autonegotiation of speed
The current code has some flaws in it when performing autonegotiation,
especially on KX/KX4 links. This patch updates the code to better handle
the autonegotiation states on link setup. The patch also removes a redundant
link configuration call on driver load, and moves link configuration to
the ->open() path.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 8e7315e..f726a14 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -146,18 +146,12 @@
bool *autoneg)
{
s32 status = 0;
- s32 autoc_reg;
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- if (hw->mac.link_settings_loaded) {
- autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
- autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
- autoc_reg |= hw->mac.link_attach_type;
- autoc_reg |= hw->mac.link_mode_select;
- }
-
- switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) {
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults.
+ */
+ switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*autoneg = false;
@@ -176,9 +170,9 @@
case IXGBE_AUTOC_LMS_KX4_AN:
case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (autoc_reg & IXGBE_AUTOC_KX4_SUPP)
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc_reg & IXGBE_AUTOC_KX_SUPP)
+ if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
*autoneg = true;
break;
@@ -390,27 +384,17 @@
u32 i;
s32 status = 0;
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- if (hw->mac.link_settings_loaded) {
- autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
- autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
- autoc_reg |= hw->mac.link_attach_type;
- autoc_reg |= hw->mac.link_mode_select;
-
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- IXGBE_WRITE_FLUSH(hw);
- msleep(50);
- }
-
/* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
/* Only poll for autoneg to complete if specified to do so */
if (hw->phy.autoneg_wait_to_complete) {
- if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN ||
- hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
links_reg = 0; /* Just in case Autoneg time = 0 */
for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
@@ -534,37 +518,43 @@
* Set the link speed in the AUTOC register and restarts link.
**/
static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
{
- s32 status = 0;
+ s32 status = 0;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc = curr_autoc;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
- /* If speed is 10G, then check for CX4 or XAUI. */
- if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
- (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) {
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
- } else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) {
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
- } else if (autoneg) {
- /* BX mode - Autonegotiate 1G */
- if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
- else /* KX/KX4 mode */
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN;
- } else {
+ /* Check to see if speed passed in is supported. */
+ ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN)
status = IXGBE_ERR_LINK_SETUP;
+
+ /* Set KX4/KX support according to speed requested */
+ else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ if (autoc != curr_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
}
if (status == 0) {
hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
- hw->mac.link_settings_loaded = true;
/*
* Setup and restart the link based on the new values in
* ixgbe_hw This will write the AUTOC register based on the new
* stored values
*/
- ixgbe_setup_mac_link_82598(hw);
+ status = ixgbe_setup_mac_link_82598(hw);
}
return status;
@@ -587,10 +577,6 @@
/* Restart autonegotiation on PHY */
status = hw->phy.ops.setup_link(hw);
- /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
- hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
-
/* Set up MAC */
ixgbe_setup_mac_link_82598(hw);
@@ -617,10 +603,6 @@
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
- /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
- hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
-
/* Set up MAC */
ixgbe_setup_mac_link_82598(hw);
@@ -720,24 +702,16 @@
IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
/*
- * AUTOC register which stores link settings gets cleared
- * and reloaded from EEPROM after reset. We need to restore
- * our stored value from init in case SW changed the attach
- * type or speed. If this is the first time and link settings
- * have not been stored, store default settings from AUTOC.
+ * Store the original AUTOC value if it has not been
+ * stored off yet. Otherwise restore the stored original
+ * AUTOC value since the reset operation sets back to deaults.
*/
autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- if (hw->mac.link_settings_loaded) {
- autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE);
- autoc &= ~(IXGBE_AUTOC_LMS_MASK);
- autoc |= hw->mac.link_attach_type;
- autoc |= hw->mac.link_mode_select;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
- } else {
- hw->mac.link_attach_type =
- (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
- hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
- hw->mac.link_settings_loaded = true;
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_link_settings_stored = true;
+ } else if (autoc != hw->mac.orig_autoc) {
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
}
/* Store the permanent mac address */