| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| /* |
| * Qualcomm MSM8960 TSENS driver |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/thermal.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/msm_tsens.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/pm.h> |
| |
| #include <mach/msm_iomap.h> |
| #include <mach/socinfo.h> |
| |
| /* Trips: from very hot to very cold */ |
| enum tsens_trip_type { |
| TSENS_TRIP_STAGE3 = 0, |
| TSENS_TRIP_STAGE2, |
| TSENS_TRIP_STAGE1, |
| TSENS_TRIP_STAGE0, |
| TSENS_TRIP_NUM, |
| }; |
| |
| /* MSM8960 TSENS register info */ |
| #define TSENS_CAL_DEGC 30 |
| #define TSENS_MAIN_SENSOR 0 |
| |
| #define TSENS_8960_QFPROM_ADDR0 (MSM_QFPROM_BASE + 0x00000404) |
| #define TSENS_8960_QFPROM_SPARE_ADDR0 (MSM_QFPROM_BASE + 0x00000414) |
| #define TSENS_8960_CONFIG 0x9b |
| #define TSENS_8960_CONFIG_SHIFT 0 |
| #define TSENS_8960_CONFIG_MASK (0xf << TSENS_8960_CONFIG_SHIFT) |
| #define TSENS_CNTL_ADDR (MSM_CLK_CTL_BASE + 0x00003620) |
| #define TSENS_EN BIT(0) |
| #define TSENS_SW_RST BIT(1) |
| #define TSENS_ADC_CLK_SEL BIT(2) |
| #define SENSOR0_EN BIT(3) |
| #define SENSOR1_EN BIT(4) |
| #define SENSOR2_EN BIT(5) |
| #define SENSOR3_EN BIT(6) |
| #define SENSOR4_EN BIT(7) |
| #define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \ |
| SENSOR2_EN | SENSOR3_EN | SENSOR4_EN) |
| #define TSENS_STATUS_CNTL_OFFSET 8 |
| #define TSENS_MIN_STATUS_MASK BIT((tsens_status_cntl_start)) |
| #define TSENS_LOWER_STATUS_CLR BIT((tsens_status_cntl_start + 1)) |
| #define TSENS_UPPER_STATUS_CLR BIT((tsens_status_cntl_start + 2)) |
| #define TSENS_MAX_STATUS_MASK BIT((tsens_status_cntl_start + 3)) |
| |
| #define TSENS_MEASURE_PERIOD 4 /* 1 sec. default */ |
| #define TSENS_8960_SLP_CLK_ENA BIT(26) |
| |
| #define TSENS_THRESHOLD_ADDR (MSM_CLK_CTL_BASE + 0x00003624) |
| #define TSENS_THRESHOLD_MAX_CODE 0xff |
| #define TSENS_THRESHOLD_MIN_CODE 0 |
| #define TSENS_THRESHOLD_MAX_LIMIT_SHIFT 24 |
| #define TSENS_THRESHOLD_MIN_LIMIT_SHIFT 16 |
| #define TSENS_THRESHOLD_UPPER_LIMIT_SHIFT 8 |
| #define TSENS_THRESHOLD_LOWER_LIMIT_SHIFT 0 |
| #define TSENS_THRESHOLD_MAX_LIMIT_MASK (TSENS_THRESHOLD_MAX_CODE << \ |
| TSENS_THRESHOLD_MAX_LIMIT_SHIFT) |
| #define TSENS_THRESHOLD_MIN_LIMIT_MASK (TSENS_THRESHOLD_MAX_CODE << \ |
| TSENS_THRESHOLD_MIN_LIMIT_SHIFT) |
| #define TSENS_THRESHOLD_UPPER_LIMIT_MASK (TSENS_THRESHOLD_MAX_CODE << \ |
| TSENS_THRESHOLD_UPPER_LIMIT_SHIFT) |
| #define TSENS_THRESHOLD_LOWER_LIMIT_MASK (TSENS_THRESHOLD_MAX_CODE << \ |
| TSENS_THRESHOLD_LOWER_LIMIT_SHIFT) |
| /* Initial temperature threshold values */ |
| #define TSENS_LOWER_LIMIT_TH 0x50 |
| #define TSENS_UPPER_LIMIT_TH 0xdf |
| #define TSENS_MIN_LIMIT_TH 0x0 |
| #define TSENS_MAX_LIMIT_TH 0xff |
| |
| #define TSENS_S0_STATUS_ADDR (MSM_CLK_CTL_BASE + 0x00003628) |
| #define TSENS_STATUS_ADDR_OFFSET 2 |
| #define TSENS_SENSOR_STATUS_SIZE 4 |
| #define TSENS_INT_STATUS_ADDR (MSM_CLK_CTL_BASE + 0x0000363c) |
| |
| #define TSENS_LOWER_INT_MASK BIT(1) |
| #define TSENS_UPPER_INT_MASK BIT(2) |
| #define TSENS_MAX_INT_MASK BIT(3) |
| #define TSENS_TRDY_MASK BIT(7) |
| |
| #define TSENS_8960_CONFIG_ADDR (MSM_CLK_CTL_BASE + 0x00003640) |
| #define TSENS_TRDY_RDY_MIN_TIME 1000 |
| #define TSENS_TRDY_RDY_MAX_TIME 1100 |
| #define TSENS_SENSOR_SHIFT 16 |
| #define TSENS_RED_SHIFT 8 |
| #define TSENS_8960_QFPROM_SHIFT 4 |
| #define TSENS_SENSOR_QFPROM_SHIFT 2 |
| #define TSENS_SENSOR0_SHIFT 3 |
| #define TSENS_MASK1 1 |
| |
| #define TSENS_8660_QFPROM_ADDR (MSM_QFPROM_BASE + 0x000000bc) |
| #define TSENS_8660_QFPROM_RED_TEMP_SENSOR0_SHIFT 24 |
| #define TSENS_8660_QFPROM_TEMP_SENSOR0_SHIFT 16 |
| #define TSENS_8660_QFPROM_TEMP_SENSOR0_MASK (255 \ |
| << TSENS_8660_QFPROM_TEMP_SENSOR0_SHIFT) |
| #define TSENS_8660_CONFIG 01 |
| #define TSENS_8660_CONFIG_SHIFT 28 |
| #define TSENS_8660_CONFIG_MASK (3 << TSENS_8660_CONFIG_SHIFT) |
| #define TSENS_8660_SLP_CLK_ENA BIT(24) |
| |
| #define TSENS_8064_SENSOR5_EN BIT(8) |
| #define TSENS_8064_SENSOR6_EN BIT(9) |
| #define TSENS_8064_SENSOR7_EN BIT(10) |
| #define TSENS_8064_SENSOR8_EN BIT(11) |
| #define TSENS_8064_SENSOR9_EN BIT(12) |
| #define TSENS_8064_SENSOR10_EN BIT(13) |
| #define TSENS_8064_SENSORS_EN (SENSORS_EN | \ |
| TSENS_8064_SENSOR5_EN | \ |
| TSENS_8064_SENSOR6_EN | \ |
| TSENS_8064_SENSOR7_EN | \ |
| TSENS_8064_SENSOR8_EN | \ |
| TSENS_8064_SENSOR9_EN | \ |
| TSENS_8064_SENSOR10_EN) |
| #define TSENS_8064_STATUS_CNTL (MSM_CLK_CTL_BASE + 0x00003660) |
| #define TSENS_8064_S5_STATUS_ADDR (MSM_CLK_CTL_BASE + 0x00003664) |
| #define TSENS_8064_SEQ_SENSORS 5 |
| #define TSENS_8064_S4_S5_OFFSET 40 |
| #define TSENS_CNTL_RESUME_MASK 0xfffffff9 |
| #define TSENS_8960_SENSOR_MASK 0xf8 |
| #define TSENS_8064_SENSOR_MASK 0x3ff8 |
| |
| static int tsens_status_cntl_start; |
| |
| struct tsens_tm_device_sensor { |
| struct thermal_zone_device *tz_dev; |
| enum thermal_device_mode mode; |
| unsigned int sensor_num; |
| struct work_struct work; |
| int offset; |
| int calib_data; |
| int calib_data_backup; |
| uint32_t slope_mul_tsens_factor; |
| }; |
| |
| struct tsens_tm_device { |
| bool prev_reading_avail; |
| int tsens_factor; |
| uint32_t tsens_num_sensor; |
| enum platform_type hw_type; |
| int pm_tsens_thr_data; |
| int pm_tsens_cntl; |
| struct work_struct tsens_work; |
| struct tsens_tm_device_sensor sensor[0]; |
| }; |
| |
| struct tsens_tm_device *tmdev; |
| |
| /* Temperature on y axis and ADC-code on x-axis */ |
| static int tsens_tz_code_to_degC(int adc_code, int sensor_num) |
| { |
| int degcbeforefactor, degc; |
| degcbeforefactor = (adc_code * |
| tmdev->sensor[sensor_num].slope_mul_tsens_factor |
| + tmdev->sensor[sensor_num].offset); |
| |
| if (degcbeforefactor == 0) |
| degc = degcbeforefactor; |
| else if (degcbeforefactor > 0) |
| degc = (degcbeforefactor + tmdev->tsens_factor/2) |
| / tmdev->tsens_factor; |
| else |
| degc = (degcbeforefactor - tmdev->tsens_factor/2) |
| / tmdev->tsens_factor; |
| return degc; |
| } |
| |
| static int tsens_tz_degC_to_code(int degC, int sensor_num) |
| { |
| int code = (degC * tmdev->tsens_factor - |
| tmdev->sensor[sensor_num].offset |
| + tmdev->sensor[sensor_num].slope_mul_tsens_factor/2) |
| / tmdev->sensor[sensor_num].slope_mul_tsens_factor; |
| |
| if (code > TSENS_THRESHOLD_MAX_CODE) |
| code = TSENS_THRESHOLD_MAX_CODE; |
| else if (code < TSENS_THRESHOLD_MIN_CODE) |
| code = TSENS_THRESHOLD_MIN_CODE; |
| return code; |
| } |
| |
| static void tsens8960_get_temp(int sensor_num, unsigned long *temp) |
| { |
| unsigned int code, offset = 0, sensor_addr; |
| |
| if (!tmdev->prev_reading_avail) { |
| while (!(readl_relaxed(TSENS_INT_STATUS_ADDR) |
| & TSENS_TRDY_MASK)) |
| usleep_range(TSENS_TRDY_RDY_MIN_TIME, |
| TSENS_TRDY_RDY_MAX_TIME); |
| tmdev->prev_reading_avail = true; |
| } |
| |
| sensor_addr = (unsigned int)TSENS_S0_STATUS_ADDR; |
| if (tmdev->hw_type == APQ_8064 && |
| sensor_num >= TSENS_8064_SEQ_SENSORS) |
| offset = TSENS_8064_S4_S5_OFFSET; |
| code = readl_relaxed(sensor_addr + offset + |
| (sensor_num << TSENS_STATUS_ADDR_OFFSET)); |
| *temp = tsens_tz_code_to_degC(code, sensor_num); |
| } |
| |
| static int tsens_tz_get_temp(struct thermal_zone_device *thermal, |
| unsigned long *temp) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| |
| if (!tm_sensor || tm_sensor->mode != THERMAL_DEVICE_ENABLED || !temp) |
| return -EINVAL; |
| |
| tsens8960_get_temp(tm_sensor->sensor_num, temp); |
| |
| return 0; |
| } |
| |
| int tsens_get_temp(struct tsens_device *device, unsigned long *temp) |
| { |
| if (!tmdev) |
| return -ENODEV; |
| |
| tsens8960_get_temp(device->sensor_num, temp); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(tsens_get_temp); |
| |
| static int tsens_tz_get_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode *mode) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| |
| if (!tm_sensor || !mode) |
| return -EINVAL; |
| |
| *mode = tm_sensor->mode; |
| |
| return 0; |
| } |
| |
| /* Function to enable the mode. |
| * If the main sensor is disabled all the sensors are disable and |
| * the clock is disabled. |
| * If the main sensor is not enabled and sub sensor is enabled |
| * returns with an error stating the main sensor is not enabled. |
| */ |
| static int tsens_tz_set_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode mode) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| unsigned int reg, mask, i; |
| |
| if (!tm_sensor) |
| return -EINVAL; |
| |
| if (mode != tm_sensor->mode) { |
| reg = readl_relaxed(TSENS_CNTL_ADDR); |
| |
| mask = 1 << (tm_sensor->sensor_num + TSENS_SENSOR0_SHIFT); |
| if (mode == THERMAL_DEVICE_ENABLED) { |
| if ((mask != SENSOR0_EN) && !(reg & SENSOR0_EN)) { |
| pr_info("Main sensor not enabled\n"); |
| return -EINVAL; |
| } |
| writel_relaxed(reg | TSENS_SW_RST, TSENS_CNTL_ADDR); |
| if (tmdev->hw_type == MSM_8960 || |
| tmdev->hw_type == MDM_9615 || |
| tmdev->hw_type == APQ_8064) |
| reg |= mask | TSENS_8960_SLP_CLK_ENA |
| | TSENS_EN; |
| else |
| reg |= mask | TSENS_8660_SLP_CLK_ENA |
| | TSENS_EN; |
| tmdev->prev_reading_avail = false; |
| } else { |
| reg &= ~mask; |
| if (!(reg & SENSOR0_EN)) { |
| if (tmdev->hw_type == APQ_8064) |
| reg &= ~(TSENS_8064_SENSORS_EN | |
| TSENS_8960_SLP_CLK_ENA | |
| TSENS_EN); |
| else if (tmdev->hw_type == MSM_8960 || |
| tmdev->hw_type == MDM_9615) |
| reg &= ~(SENSORS_EN | |
| TSENS_8960_SLP_CLK_ENA | |
| TSENS_EN); |
| else |
| reg &= ~(SENSORS_EN | |
| TSENS_8660_SLP_CLK_ENA | |
| TSENS_EN); |
| |
| for (i = 1; i < tmdev->tsens_num_sensor; i++) |
| tmdev->sensor[i].mode = mode; |
| |
| } |
| } |
| writel_relaxed(reg, TSENS_CNTL_ADDR); |
| } |
| tm_sensor->mode = mode; |
| |
| return 0; |
| } |
| |
| static int tsens_tz_get_trip_type(struct thermal_zone_device *thermal, |
| int trip, enum thermal_trip_type *type) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| |
| if (!tm_sensor || trip < 0 || !type) |
| return -EINVAL; |
| |
| switch (trip) { |
| case TSENS_TRIP_STAGE3: |
| *type = THERMAL_TRIP_CRITICAL; |
| break; |
| case TSENS_TRIP_STAGE2: |
| *type = THERMAL_TRIP_CONFIGURABLE_HI; |
| break; |
| case TSENS_TRIP_STAGE1: |
| *type = THERMAL_TRIP_CONFIGURABLE_LOW; |
| break; |
| case TSENS_TRIP_STAGE0: |
| *type = THERMAL_TRIP_CRITICAL_LOW; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int tsens_tz_activate_trip_type(struct thermal_zone_device *thermal, |
| int trip, enum thermal_trip_activation_mode mode) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| unsigned int reg_cntl, reg_th, code, hi_code, lo_code, mask; |
| |
| if (!tm_sensor || trip < 0) |
| return -EINVAL; |
| |
| lo_code = TSENS_THRESHOLD_MIN_CODE; |
| hi_code = TSENS_THRESHOLD_MAX_CODE; |
| |
| if (tmdev->hw_type == APQ_8064) |
| reg_cntl = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| else |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| |
| reg_th = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| switch (trip) { |
| case TSENS_TRIP_STAGE3: |
| code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| mask = TSENS_MAX_STATUS_MASK; |
| |
| if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE2: |
| code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| mask = TSENS_UPPER_STATUS_CLR; |
| |
| if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE1: |
| code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| mask = TSENS_LOWER_STATUS_CLR; |
| |
| if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE0: |
| code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| mask = TSENS_MIN_STATUS_MASK; |
| |
| if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (mode == THERMAL_TRIP_ACTIVATION_DISABLED) { |
| if (tmdev->hw_type == APQ_8064) |
| writel_relaxed(reg_cntl | mask, TSENS_8064_STATUS_CNTL); |
| else |
| writel_relaxed(reg_cntl | mask, TSENS_CNTL_ADDR); |
| } else { |
| if (code < lo_code || code > hi_code) { |
| pr_info("%s with invalid code %x\n", __func__, code); |
| return -EINVAL; |
| } |
| if (tmdev->hw_type == APQ_8064) |
| writel_relaxed(reg_cntl & ~mask, |
| TSENS_8064_STATUS_CNTL); |
| else |
| writel_relaxed(reg_cntl & ~mask, TSENS_CNTL_ADDR); |
| } |
| mb(); |
| return 0; |
| } |
| |
| static int tsens_tz_get_trip_temp(struct thermal_zone_device *thermal, |
| int trip, unsigned long *temp) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| unsigned int reg; |
| |
| if (!tm_sensor || trip < 0 || !temp) |
| return -EINVAL; |
| |
| reg = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| switch (trip) { |
| case TSENS_TRIP_STAGE3: |
| reg = (reg & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE2: |
| reg = (reg & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE1: |
| reg = (reg & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE0: |
| reg = (reg & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *temp = tsens_tz_code_to_degC(reg, tm_sensor->sensor_num); |
| |
| return 0; |
| } |
| |
| static int tsens_tz_get_crit_temp(struct thermal_zone_device *thermal, |
| unsigned long *temp) |
| { |
| return tsens_tz_get_trip_temp(thermal, TSENS_TRIP_STAGE3, temp); |
| } |
| |
| static int tsens_tz_notify(struct thermal_zone_device *thermal, |
| int count, enum thermal_trip_type type) |
| { |
| /* TSENS driver does not shutdown the device. |
| All Thermal notification are sent to the |
| thermal daemon to take appropriate action */ |
| return 1; |
| } |
| |
| static int tsens_tz_set_trip_temp(struct thermal_zone_device *thermal, |
| int trip, long temp) |
| { |
| struct tsens_tm_device_sensor *tm_sensor = thermal->devdata; |
| unsigned int reg_th, reg_cntl; |
| int code, hi_code, lo_code, code_err_chk; |
| |
| code_err_chk = code = tsens_tz_degC_to_code(temp, |
| tm_sensor->sensor_num); |
| if (!tm_sensor || trip < 0) |
| return -EINVAL; |
| |
| lo_code = TSENS_THRESHOLD_MIN_CODE; |
| hi_code = TSENS_THRESHOLD_MAX_CODE; |
| |
| if (tmdev->hw_type == APQ_8064) |
| reg_cntl = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| else |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| reg_th = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| switch (trip) { |
| case TSENS_TRIP_STAGE3: |
| code <<= TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| reg_th &= ~TSENS_THRESHOLD_MAX_LIMIT_MASK; |
| |
| if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE2: |
| code <<= TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| reg_th &= ~TSENS_THRESHOLD_UPPER_LIMIT_MASK; |
| |
| if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| lo_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE1: |
| code <<= TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| reg_th &= ~TSENS_THRESHOLD_LOWER_LIMIT_MASK; |
| |
| if (!(reg_cntl & TSENS_MIN_STATUS_MASK)) |
| lo_code = (reg_th & TSENS_THRESHOLD_MIN_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| break; |
| case TSENS_TRIP_STAGE0: |
| code <<= TSENS_THRESHOLD_MIN_LIMIT_SHIFT; |
| reg_th &= ~TSENS_THRESHOLD_MIN_LIMIT_MASK; |
| |
| if (!(reg_cntl & TSENS_LOWER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_UPPER_STATUS_CLR)) |
| hi_code = (reg_th & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| else if (!(reg_cntl & TSENS_MAX_STATUS_MASK)) |
| hi_code = (reg_th & TSENS_THRESHOLD_MAX_LIMIT_MASK) |
| >> TSENS_THRESHOLD_MAX_LIMIT_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (code_err_chk < lo_code || code_err_chk > hi_code) |
| return -EINVAL; |
| |
| writel_relaxed(reg_th | code, TSENS_THRESHOLD_ADDR); |
| |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops tsens_thermal_zone_ops = { |
| .get_temp = tsens_tz_get_temp, |
| .get_mode = tsens_tz_get_mode, |
| .set_mode = tsens_tz_set_mode, |
| .get_trip_type = tsens_tz_get_trip_type, |
| .activate_trip_type = tsens_tz_activate_trip_type, |
| .get_trip_temp = tsens_tz_get_trip_temp, |
| .set_trip_temp = tsens_tz_set_trip_temp, |
| .get_crit_temp = tsens_tz_get_crit_temp, |
| .notify = tsens_tz_notify, |
| }; |
| |
| static void notify_uspace_tsens_fn(struct work_struct *work) |
| { |
| struct tsens_tm_device_sensor *tm = container_of(work, |
| struct tsens_tm_device_sensor, work); |
| |
| sysfs_notify(&tm->tz_dev->device.kobj, |
| NULL, "type"); |
| } |
| |
| static void tsens_scheduler_fn(struct work_struct *work) |
| { |
| struct tsens_tm_device *tm = container_of(work, struct tsens_tm_device, |
| tsens_work); |
| unsigned int threshold, threshold_low, i, code, reg, sensor, mask; |
| unsigned int sensor_addr; |
| bool upper_th_x, lower_th_x; |
| int adc_code; |
| |
| if (tmdev->hw_type == APQ_8064) { |
| reg = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| writel_relaxed(reg | TSENS_LOWER_STATUS_CLR | |
| TSENS_UPPER_STATUS_CLR, TSENS_8064_STATUS_CNTL); |
| } else { |
| reg = readl_relaxed(TSENS_CNTL_ADDR); |
| writel_relaxed(reg | TSENS_LOWER_STATUS_CLR | |
| TSENS_UPPER_STATUS_CLR, TSENS_CNTL_ADDR); |
| } |
| |
| mask = ~(TSENS_LOWER_STATUS_CLR | TSENS_UPPER_STATUS_CLR); |
| threshold = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| threshold_low = (threshold & TSENS_THRESHOLD_LOWER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_LOWER_LIMIT_SHIFT; |
| threshold = (threshold & TSENS_THRESHOLD_UPPER_LIMIT_MASK) |
| >> TSENS_THRESHOLD_UPPER_LIMIT_SHIFT; |
| sensor = readl_relaxed(TSENS_CNTL_ADDR); |
| if (tmdev->hw_type == APQ_8064) { |
| reg = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| sensor &= (uint32_t) TSENS_8064_SENSORS_EN; |
| } else { |
| reg = sensor; |
| sensor &= (uint32_t) SENSORS_EN; |
| } |
| sensor >>= TSENS_SENSOR0_SHIFT; |
| sensor_addr = (unsigned int)TSENS_S0_STATUS_ADDR; |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) { |
| if (i == TSENS_8064_SEQ_SENSORS) |
| sensor_addr += TSENS_8064_S4_S5_OFFSET; |
| if (sensor & TSENS_MASK1) { |
| code = readl_relaxed(sensor_addr); |
| upper_th_x = code >= threshold; |
| lower_th_x = code <= threshold_low; |
| if (upper_th_x) |
| mask |= TSENS_UPPER_STATUS_CLR; |
| if (lower_th_x) |
| mask |= TSENS_LOWER_STATUS_CLR; |
| if (upper_th_x || lower_th_x) { |
| /* Notify user space */ |
| schedule_work(&tm->sensor[i].work); |
| adc_code = readl_relaxed(sensor_addr); |
| pr_debug("Trigger (%d degrees) for sensor %d\n", |
| tsens_tz_code_to_degC(adc_code, i), i); |
| } |
| } |
| sensor >>= 1; |
| sensor_addr += TSENS_SENSOR_STATUS_SIZE; |
| } |
| if (tmdev->hw_type == APQ_8064) |
| writel_relaxed(reg & mask, TSENS_8064_STATUS_CNTL); |
| else |
| writel_relaxed(reg & mask, TSENS_CNTL_ADDR); |
| mb(); |
| } |
| |
| static irqreturn_t tsens_isr(int irq, void *data) |
| { |
| schedule_work(&tmdev->tsens_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void tsens8960_sensor_mode_init(void) |
| { |
| unsigned int reg_cntl = 0; |
| |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615 || |
| tmdev->hw_type == APQ_8064) { |
| writel_relaxed(reg_cntl & |
| ~((((1 << tmdev->tsens_num_sensor) - 1) >> 1) |
| << (TSENS_SENSOR0_SHIFT + 1)), TSENS_CNTL_ADDR); |
| tmdev->sensor[TSENS_MAIN_SENSOR].mode = THERMAL_DEVICE_ENABLED; |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| static int tsens_suspend(struct device *dev) |
| { |
| int i = 0; |
| |
| tmdev->pm_tsens_thr_data = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| tmdev->pm_tsens_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| writel_relaxed(tmdev->pm_tsens_cntl & |
| ~(TSENS_8960_SLP_CLK_ENA | TSENS_EN), TSENS_CNTL_ADDR); |
| tmdev->prev_reading_avail = 0; |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) |
| tmdev->sensor[i].mode = THERMAL_DEVICE_DISABLED; |
| disable_irq_nosync(TSENS_UPPER_LOWER_INT); |
| mb(); |
| return 0; |
| } |
| |
| static int tsens_resume(struct device *dev) |
| { |
| unsigned int reg_cntl = 0, reg_cfg = 0, reg_sensor_mask = 0; |
| unsigned int reg_status_cntl = 0, reg_thr_data = 0, i = 0; |
| |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| writel_relaxed(reg_cntl | TSENS_SW_RST, TSENS_CNTL_ADDR); |
| |
| if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615) { |
| reg_cntl |= TSENS_8960_SLP_CLK_ENA | |
| (TSENS_MEASURE_PERIOD << 18) | |
| TSENS_MIN_STATUS_MASK | TSENS_MAX_STATUS_MASK | |
| SENSORS_EN; |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| } else if (tmdev->hw_type == APQ_8064) { |
| reg_cntl |= TSENS_8960_SLP_CLK_ENA | |
| (TSENS_MEASURE_PERIOD << 18) | |
| (((1 << tmdev->tsens_num_sensor) - 1) |
| << TSENS_SENSOR0_SHIFT); |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| reg_status_cntl = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| reg_status_cntl |= TSENS_MIN_STATUS_MASK | |
| TSENS_MAX_STATUS_MASK; |
| writel_relaxed(reg_status_cntl, TSENS_8064_STATUS_CNTL); |
| } |
| |
| reg_cfg = readl_relaxed(TSENS_8960_CONFIG_ADDR); |
| reg_cfg = (reg_cfg & ~TSENS_8960_CONFIG_MASK) | |
| (TSENS_8960_CONFIG << TSENS_8960_CONFIG_SHIFT); |
| writel_relaxed(reg_cfg, TSENS_8960_CONFIG_ADDR); |
| |
| writel_relaxed((tmdev->pm_tsens_cntl & TSENS_CNTL_RESUME_MASK), |
| TSENS_CNTL_ADDR); |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| writel_relaxed(tmdev->pm_tsens_thr_data, TSENS_THRESHOLD_ADDR); |
| reg_thr_data = readl_relaxed(TSENS_THRESHOLD_ADDR); |
| if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615) |
| reg_sensor_mask = ((reg_cntl & TSENS_8960_SENSOR_MASK) |
| >> TSENS_SENSOR0_SHIFT); |
| else { |
| reg_sensor_mask = ((reg_cntl & TSENS_8064_SENSOR_MASK) |
| >> TSENS_SENSOR0_SHIFT); |
| } |
| |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) { |
| if (reg_sensor_mask & TSENS_MASK1) |
| tmdev->sensor[i].mode = THERMAL_DEVICE_ENABLED; |
| reg_sensor_mask >>= 1; |
| } |
| |
| enable_irq(TSENS_UPPER_LOWER_INT); |
| mb(); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops tsens_pm_ops = { |
| .suspend = tsens_suspend, |
| .resume = tsens_resume, |
| }; |
| #endif |
| |
| static void tsens_disable_mode(void) |
| { |
| unsigned int reg_cntl = 0; |
| |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615 || |
| tmdev->hw_type == APQ_8064) |
| writel_relaxed(reg_cntl & |
| ~((((1 << tmdev->tsens_num_sensor) - 1) << |
| TSENS_SENSOR0_SHIFT) | TSENS_8960_SLP_CLK_ENA |
| | TSENS_EN), TSENS_CNTL_ADDR); |
| else if (tmdev->hw_type == MSM_8660) |
| writel_relaxed(reg_cntl & |
| ~((((1 << tmdev->tsens_num_sensor) - 1) << |
| TSENS_SENSOR0_SHIFT) | TSENS_8660_SLP_CLK_ENA |
| | TSENS_EN), TSENS_CNTL_ADDR); |
| } |
| |
| static void tsens_hw_init(void) |
| { |
| unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0; |
| unsigned int reg_status_cntl = 0; |
| |
| reg_cntl = readl_relaxed(TSENS_CNTL_ADDR); |
| writel_relaxed(reg_cntl | TSENS_SW_RST, TSENS_CNTL_ADDR); |
| |
| if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615) { |
| reg_cntl |= TSENS_8960_SLP_CLK_ENA | |
| (TSENS_MEASURE_PERIOD << 18) | |
| TSENS_LOWER_STATUS_CLR | TSENS_UPPER_STATUS_CLR | |
| TSENS_MIN_STATUS_MASK | TSENS_MAX_STATUS_MASK | |
| SENSORS_EN; |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| reg_cntl |= TSENS_EN; |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| |
| reg_cfg = readl_relaxed(TSENS_8960_CONFIG_ADDR); |
| reg_cfg = (reg_cfg & ~TSENS_8960_CONFIG_MASK) | |
| (TSENS_8960_CONFIG << TSENS_8960_CONFIG_SHIFT); |
| writel_relaxed(reg_cfg, TSENS_8960_CONFIG_ADDR); |
| } else if (tmdev->hw_type == MSM_8660) { |
| reg_cntl |= TSENS_8660_SLP_CLK_ENA | TSENS_EN | |
| (TSENS_MEASURE_PERIOD << 16) | |
| TSENS_LOWER_STATUS_CLR | TSENS_UPPER_STATUS_CLR | |
| TSENS_MIN_STATUS_MASK | TSENS_MAX_STATUS_MASK | |
| (((1 << tmdev->tsens_num_sensor) - 1) << |
| TSENS_SENSOR0_SHIFT); |
| |
| /* set TSENS_CONFIG bits (bits 29:28 of TSENS_CNTL) to '01'; |
| this setting found to be optimal. */ |
| reg_cntl = (reg_cntl & ~TSENS_8660_CONFIG_MASK) | |
| (TSENS_8660_CONFIG << TSENS_8660_CONFIG_SHIFT); |
| |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| } else if (tmdev->hw_type == APQ_8064) { |
| reg_cntl |= TSENS_8960_SLP_CLK_ENA | |
| (TSENS_MEASURE_PERIOD << 18) | |
| (((1 << tmdev->tsens_num_sensor) - 1) |
| << TSENS_SENSOR0_SHIFT); |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| reg_status_cntl = readl_relaxed(TSENS_8064_STATUS_CNTL); |
| reg_status_cntl |= TSENS_LOWER_STATUS_CLR | |
| TSENS_UPPER_STATUS_CLR | |
| TSENS_MIN_STATUS_MASK | |
| TSENS_MAX_STATUS_MASK; |
| writel_relaxed(reg_status_cntl, TSENS_8064_STATUS_CNTL); |
| reg_cntl |= TSENS_EN; |
| writel_relaxed(reg_cntl, TSENS_CNTL_ADDR); |
| |
| reg_cfg = readl_relaxed(TSENS_8960_CONFIG_ADDR); |
| reg_cfg = (reg_cfg & ~TSENS_8960_CONFIG_MASK) | |
| (TSENS_8960_CONFIG << TSENS_8960_CONFIG_SHIFT); |
| writel_relaxed(reg_cfg, TSENS_8960_CONFIG_ADDR); |
| } |
| |
| reg_thr |= (TSENS_LOWER_LIMIT_TH << TSENS_THRESHOLD_LOWER_LIMIT_SHIFT) | |
| (TSENS_UPPER_LIMIT_TH << TSENS_THRESHOLD_UPPER_LIMIT_SHIFT) | |
| (TSENS_MIN_LIMIT_TH << TSENS_THRESHOLD_MIN_LIMIT_SHIFT) | |
| (TSENS_MAX_LIMIT_TH << TSENS_THRESHOLD_MAX_LIMIT_SHIFT); |
| writel_relaxed(reg_thr, TSENS_THRESHOLD_ADDR); |
| } |
| |
| static int tsens_calib_sensors8660(void) |
| { |
| uint32_t *main_sensor_addr, sensor_shift, red_sensor_shift; |
| uint32_t sensor_mask, red_sensor_mask; |
| |
| main_sensor_addr = TSENS_8660_QFPROM_ADDR; |
| sensor_shift = TSENS_SENSOR_SHIFT; |
| red_sensor_shift = sensor_shift + TSENS_RED_SHIFT; |
| sensor_mask = TSENS_THRESHOLD_MAX_CODE << sensor_shift; |
| red_sensor_mask = TSENS_THRESHOLD_MAX_CODE << red_sensor_shift; |
| tmdev->sensor[TSENS_MAIN_SENSOR].calib_data = |
| (readl_relaxed(main_sensor_addr) & sensor_mask) |
| >> sensor_shift; |
| tmdev->sensor[TSENS_MAIN_SENSOR].calib_data_backup = |
| (readl_relaxed(main_sensor_addr) |
| & red_sensor_mask) >> red_sensor_shift; |
| if (tmdev->sensor[TSENS_MAIN_SENSOR].calib_data_backup) |
| tmdev->sensor[TSENS_MAIN_SENSOR].calib_data = |
| tmdev->sensor[TSENS_MAIN_SENSOR].calib_data_backup; |
| if (!tmdev->sensor[TSENS_MAIN_SENSOR].calib_data) { |
| pr_err("QFPROM TSENS calibration data not present\n"); |
| return -ENODEV; |
| } |
| |
| tmdev->sensor[TSENS_MAIN_SENSOR].offset = tmdev->tsens_factor * |
| TSENS_CAL_DEGC - |
| tmdev->sensor[TSENS_MAIN_SENSOR].slope_mul_tsens_factor * |
| tmdev->sensor[TSENS_MAIN_SENSOR].calib_data; |
| |
| tmdev->prev_reading_avail = false; |
| INIT_WORK(&tmdev->sensor[TSENS_MAIN_SENSOR].work, |
| notify_uspace_tsens_fn); |
| |
| return 0; |
| } |
| |
| static int tsens_calib_sensors8960(void) |
| { |
| uint32_t i; |
| uint8_t *main_sensor_addr, *backup_sensor_addr; |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) { |
| main_sensor_addr = TSENS_8960_QFPROM_ADDR0 + i; |
| backup_sensor_addr = TSENS_8960_QFPROM_SPARE_ADDR0 + i; |
| |
| tmdev->sensor[i].calib_data = readb_relaxed(main_sensor_addr); |
| tmdev->sensor[i].calib_data_backup = |
| readb_relaxed(backup_sensor_addr); |
| if (tmdev->sensor[i].calib_data_backup) |
| tmdev->sensor[i].calib_data = |
| tmdev->sensor[i].calib_data_backup; |
| if (!tmdev->sensor[i].calib_data) { |
| pr_err("QFPROM TSENS calibration data not present\n"); |
| return -ENODEV; |
| } |
| tmdev->sensor[i].offset = (TSENS_CAL_DEGC * |
| tmdev->tsens_factor) |
| - (tmdev->sensor[i].calib_data * |
| tmdev->sensor[i].slope_mul_tsens_factor); |
| tmdev->prev_reading_avail = false; |
| INIT_WORK(&tmdev->sensor[i].work, notify_uspace_tsens_fn); |
| } |
| |
| return 0; |
| } |
| |
| static int tsens_check_version_support(void) |
| { |
| int rc = 0; |
| |
| if (tmdev->hw_type == MSM_8960) |
| if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) == 1) |
| rc = -ENODEV; |
| |
| return rc; |
| } |
| |
| static int tsens_calib_sensors(void) |
| { |
| int rc = -ENODEV; |
| |
| if (tmdev->hw_type == MSM_8660) |
| rc = tsens_calib_sensors8660(); |
| else if (tmdev->hw_type == MSM_8960 || tmdev->hw_type == MDM_9615 || |
| tmdev->hw_type == APQ_8064) |
| rc = tsens_calib_sensors8960(); |
| |
| return rc; |
| } |
| |
| int msm_tsens_early_init(struct tsens_platform_data *pdata) |
| { |
| int rc = 0, i; |
| |
| if (!pdata) { |
| pr_err("No TSENS Platform data\n"); |
| return -EINVAL; |
| } |
| |
| tmdev = kzalloc(sizeof(struct tsens_tm_device) + |
| pdata->tsens_num_sensor * |
| sizeof(struct tsens_tm_device_sensor), |
| GFP_ATOMIC); |
| if (tmdev == NULL) { |
| pr_err("%s: kzalloc() failed.\n", __func__); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < pdata->tsens_num_sensor; i++) |
| tmdev->sensor[i].slope_mul_tsens_factor = pdata->slope[i]; |
| tmdev->tsens_factor = pdata->tsens_factor; |
| tmdev->tsens_num_sensor = pdata->tsens_num_sensor; |
| tmdev->hw_type = pdata->hw_type; |
| |
| rc = tsens_check_version_support(); |
| if (rc < 0) { |
| kfree(tmdev); |
| tmdev = NULL; |
| return rc; |
| } |
| |
| rc = tsens_calib_sensors(); |
| if (rc < 0) { |
| kfree(tmdev); |
| tmdev = NULL; |
| return rc; |
| } |
| |
| if (tmdev->hw_type == APQ_8064) |
| tsens_status_cntl_start = 0; |
| else |
| tsens_status_cntl_start = TSENS_STATUS_CNTL_OFFSET; |
| |
| tsens_hw_init(); |
| |
| pr_debug("msm_tsens_early_init: done\n"); |
| |
| return rc; |
| } |
| |
| static int __devinit tsens_tm_probe(struct platform_device *pdev) |
| { |
| int rc, i; |
| |
| if (!tmdev) { |
| pr_info("%s : TSENS early init not done.\n", __func__); |
| return -EFAULT; |
| } |
| |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) { |
| char name[18]; |
| snprintf(name, sizeof(name), "tsens_tz_sensor%d", i); |
| tmdev->sensor[i].mode = THERMAL_DEVICE_ENABLED; |
| tmdev->sensor[i].sensor_num = i; |
| tmdev->sensor[i].tz_dev = thermal_zone_device_register(name, |
| TSENS_TRIP_NUM, &tmdev->sensor[i], |
| &tsens_thermal_zone_ops, 0, 0, 0, 0); |
| if (IS_ERR(tmdev->sensor[i].tz_dev)) { |
| pr_err("%s: thermal_zone_device_register() failed.\n", |
| __func__); |
| rc = -ENODEV; |
| goto fail; |
| } |
| tmdev->sensor[i].mode = THERMAL_DEVICE_DISABLED; |
| } |
| |
| tsens8960_sensor_mode_init(); |
| |
| rc = request_irq(TSENS_UPPER_LOWER_INT, tsens_isr, |
| IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev); |
| if (rc < 0) { |
| pr_err("%s: request_irq FAIL: %d\n", __func__, rc); |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) |
| thermal_zone_device_unregister(tmdev->sensor[i].tz_dev); |
| goto fail; |
| } |
| INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn); |
| |
| pr_debug("%s: OK\n", __func__); |
| mb(); |
| return 0; |
| fail: |
| tsens_disable_mode(); |
| kfree(tmdev); |
| tmdev = NULL; |
| mb(); |
| return rc; |
| } |
| |
| static int __devexit tsens_tm_remove(struct platform_device *pdev) |
| { |
| int i; |
| |
| tsens_disable_mode(); |
| mb(); |
| free_irq(TSENS_UPPER_LOWER_INT, tmdev); |
| for (i = 0; i < tmdev->tsens_num_sensor; i++) |
| thermal_zone_device_unregister(tmdev->sensor[i].tz_dev); |
| kfree(tmdev); |
| tmdev = NULL; |
| return 0; |
| } |
| |
| static struct platform_driver tsens_tm_driver = { |
| .probe = tsens_tm_probe, |
| .remove = tsens_tm_remove, |
| .driver = { |
| .name = "tsens8960-tm", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &tsens_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init _tsens_tm_init(void) |
| { |
| return platform_driver_register(&tsens_tm_driver); |
| } |
| module_init(_tsens_tm_init); |
| |
| static void __exit _tsens_tm_remove(void) |
| { |
| platform_driver_unregister(&tsens_tm_driver); |
| } |
| module_exit(_tsens_tm_remove); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MSM8960 Temperature Sensor driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:tsens8960-tm"); |