Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
index d145ccc..c7c7a11 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment. The number is made up from various bits:
+/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e0f346d..c9115c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -220,14 +220,17 @@
Bits in debug_level correspond to a level in
ACPI_DEBUG_PRINT statements, e.g.,
ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
- See Documentation/acpi/debug.txt for more information
- about debug layers and levels.
+ The debug_level mask defaults to "info". See
+ Documentation/acpi/debug.txt for more information about
+ debug layers and levels.
+ Enable processor driver info messages:
+ acpi.debug_layer=0x20000000
+ Enable PCI/PCI interrupt routing info messages:
+ acpi.debug_layer=0x400000
Enable AML "Debug" output, i.e., stores to the Debug
object while interpreting AML:
acpi.debug_layer=0xffffffff acpi.debug_level=0x2
- Enable PCI/PCI interrupt routing info messages:
- acpi.debug_layer=0x400000 acpi.debug_level=0x4
Enable all messages related to ACPI hardware:
acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3cd2ad9..394d7d3 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1063,6 +1063,7 @@
STAC9227/9228/9229/927x
ref Reference board
+ ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
dell-3stack Dell Dimension E520
@@ -1076,6 +1077,7 @@
STAC92HD73*
ref Reference board
+ no-jd BIOS setup but without jack-detection
dell-m6-amic Dell desktops/laptops with analog mics
dell-m6-dmic Dell desktops/laptops with digital mics
dell-m6 Dell desktops/laptops with both type of mics
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd1..eac7df9 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
- modprobe g_serial use_acm=1
+ modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
- modprobe g_serial
+ modprobe g_serial use_acm=0
This will also automatically load the underlying gadget peripheral
controller driver. This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e903..fafcd47 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@
These files can be read as binary data. The binary data consists
of first the device descriptor, then the descriptors for each
-configuration of the device. That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device. Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel. This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
These files may also be used to write user-level drivers for the USB
devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4..2704819 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
-0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
+0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
@@ -99,8 +100,9 @@
Here is the list of words, from left to right:
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+ of the URB structure in hexadecimal, but can be a sequence number or any
+ other unique string, within reason.
- Timestamp in microseconds, a decimal number. The timestamp's resolution
depends on available clock, and so it can be much worse than a microsecond
diff --git a/MAINTAINERS b/MAINTAINERS
index 24741de..fbc8fa5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1527,10 +1527,10 @@
S: Maintained
ECRYPT FILE SYSTEM
-P: Mike Halcrow, Phillip Hellewell
-M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L: ecryptfs-devel@lists.sourceforge.net
-W: http://ecryptfs.sourceforge.net/
+P: Tyler Hicks, Dustin Kirkland
+M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L: ecryptfs-devel@lists.launchpad.net
+W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
@@ -2191,9 +2191,9 @@
INOTIFY
P: John McCutchan
-M: ttb@tentacle.dhs.org
+M: john@johnmccutchan.com
P: Robert Love
-M: rml@novell.com
+M: rlove@rlove.org
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -4529,7 +4529,7 @@
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linux-uvc-devel@lists.berlios.de
+L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
diff --git a/Makefile b/Makefile
index 6c2f51b..71e98e9 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc8
+EXTRAVERSION =
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 47ccec9..ef12794 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
- if (!sachip->clk) {
+ if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c74f766..23af3c9 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -115,6 +115,8 @@
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@
EXPORT_SYMBOL(_find_next_bit_be);
#endif
-EXPORT_SYMBOL(copy_page);
-
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57e6874..79abc4d 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842c..31e6a7b 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@
/**
* init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2df8d9f..22c9530 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
index 5f139b7..604bbd5 100644
--- a/arch/avr32/boards/favr-32/flash.c
+++ b/arch/avr32/boards/favr-32/flash.c
@@ -13,7 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 7538f3d..1ee4faf 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -25,10 +25,10 @@
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
/* Oscillator frequencies. These are board-specific */
unsigned long at32_board_osc_rates[3] = {
diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile
index 219720a..1848bf0 100644
--- a/arch/avr32/boot/images/Makefile
+++ b/arch/avr32/boot/images/Makefile
@@ -10,7 +10,7 @@
extra-y := vmlinux.bin vmlinux.gz
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 8b6e54c..6c45a3b 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 15:40:26 2008
+# Linux kernel version: 2.6.28-rc8
+# Thu Dec 18 11:22:23 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -67,6 +67,7 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
@@ -77,15 +78,8 @@
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -118,6 +112,7 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type and features
@@ -134,6 +129,8 @@
CONFIG_CPU_AT32AP7000=y
CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
# CONFIG_BOARD_ATSTK1002 is not set
# CONFIG_BOARD_ATSTK1003 is not set
# CONFIG_BOARD_ATSTK1004 is not set
@@ -171,14 +168,14 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
@@ -186,7 +183,7 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_CMDLINE=""
#
@@ -228,6 +225,8 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
@@ -299,6 +298,7 @@
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@@ -321,14 +321,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -359,6 +353,7 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@@ -407,6 +402,8 @@
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
@@ -464,9 +461,10 @@
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
@@ -548,6 +546,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -653,6 +654,7 @@
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
@@ -717,6 +719,10 @@
CONFIG_GPIO_SYSFS=y
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -745,11 +751,11 @@
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -758,6 +764,10 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -783,6 +793,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -804,10 +815,13 @@
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
@@ -818,6 +832,7 @@
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -848,28 +863,32 @@
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
@@ -887,7 +906,7 @@
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -895,10 +914,11 @@
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
@@ -918,6 +938,7 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
@@ -950,25 +971,31 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -989,6 +1016,8 @@
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -998,12 +1027,17 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
@@ -1036,6 +1070,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -1054,7 +1089,8 @@
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
@@ -1088,6 +1124,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1185,10 +1222,21 @@
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
@@ -1196,17 +1244,26 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1257,7 +1314,7 @@
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -1278,14 +1335,17 @@
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0c6e02f..066252e 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -967,28 +967,28 @@
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index f92306b..8d513a8 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@
config HP_SIMETH
bool "Simulated Ethernet "
+ depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 765c8e2..364ca89 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -48,7 +48,7 @@
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
- include/asm-mips/debug.h for debuging macros.
+ arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index fe4699d..de4c7a0 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,71 +1,71 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -75,6 +75,7 @@
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -87,6 +88,7 @@
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -116,65 +118,73 @@
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
@@ -184,27 +194,43 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -213,59 +239,50 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
CONFIG_BINFMT_ELF32=y
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -273,56 +290,83 @@
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -332,10 +376,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -343,15 +383,14 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -360,60 +399,40 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -421,19 +440,20 @@
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
@@ -443,35 +463,36 @@
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -482,6 +503,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -492,147 +514,81 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SGI_O2MACE_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -640,6 +596,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -649,16 +606,32 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -669,8 +642,8 @@
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
@@ -678,10 +651,13 @@
# Character devices
#
CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -702,192 +678,304 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Hardware Monitoring support
+# Watchdog Device Drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
+# Special HID drivers
#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
#
#
-# Real Time Clock
+# Platform RTC drivers
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Engine support
+# on-CPU RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -896,11 +984,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
@@ -916,33 +1004,42 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -953,45 +1050,83 @@
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -1000,51 +1135,99 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_WP512=y
#
-# Hardware crypto devices
+# Ciphers
#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
@@ -1052,10 +1235,15 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 7a88175..6c8342a 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -35,6 +35,16 @@
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
+#elif defined(CONFIG_CPU_MIPSR2)
+ .macro local_irq_enable reg=t0
+ ei
+ irq_enable_hazard
+ .endm
+
+ .macro local_irq_disable reg=t0
+ di
+ irq_disable_hazard
+ .endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index 2988d29..33790b9 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -50,9 +50,8 @@
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
- " dsbh %0, %1 \n"
- " dshd %0, %0 \n"
- " drotr %0, %0, 32 \n"
+ " dsbh %0, %1\n"
+ " dshd %0, %0"
: "=r" (x)
: "r" (x));
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index a8eac16..d58f128 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -232,7 +232,7 @@
*/
#ifdef __MIPSEB__
#define ELF_DATA ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_MIPS
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 5b98d0e..e6708b3 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -111,6 +111,7 @@
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
+ plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
@@ -121,6 +122,8 @@
{
unsigned long addr = (unsigned long) vaddr;
+ plat_unmap_dma_mem(dma_handle);
+
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index b72ec66..1f6fd4f 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -44,9 +44,12 @@
{
BUG_ON(mm == &init_mm); /* Should never happen */
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
flush_tlb_all();
#else
+ /* FIXME: currently broken, causing space id and protection ids
+ * to go out of sync, resulting in faults on userspace accesses.
+ */
if (mm) {
if (mm->context != 0)
free_sid(mm->context);
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8fc6d72..3d3daa6 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -41,6 +41,7 @@
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index bdc8b0e..5c33bc1 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -479,17 +479,20 @@
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
- beqlr
+ beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
msync
isync
+1: wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 29b2941..45907c1 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@
be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
+ blk = NULL;
}
if (blk == NULL)
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7bbf4e4..f0c3b88 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -507,6 +507,9 @@
{
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+ if (!mmu_huge_psizes[mmu_psize])
+ return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a8397bb..cf81049 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -901,10 +901,17 @@
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
+ /*
+ * Only worry about *this* node, others may not
+ * yet have valid NODE_DATA().
+ */
+ if (node_ar.nid == nid) {
+ dbg("reserve_bootmem %lx %lx nid=%d\n",
+ physbase, reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid),
+ physbase, reserve_size,
+ BOOTMEM_DEFAULT);
+ }
/*
* if reserved region is contained in the active region
* then done.
@@ -929,7 +936,6 @@
void __init do_init_bootmem(void)
{
int nid;
- unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 442cf36..0ce45c2 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -413,6 +413,9 @@
MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
MSIC_CTRL_FIFO_SIZE);
+ msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
+ & MSIC_FIFO_SIZE_MASK;
+
device->dev.platform_data = msic;
ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 80119b3..5c9cbfc 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,6 +55,8 @@
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
+ depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+ !SH_7751_SYSTEMH && !HD64461)
config GENERIC_IRQ_PROBE
def_bool y
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
index d409c4f..4cef450 100644
--- a/arch/sparc/include/asm/ptrace_32.h
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -62,6 +62,8 @@
#ifdef __KERNEL__
+#include <asm/system.h>
+
static inline bool pt_regs_is_syscall(struct pt_regs *regs)
{
return (regs->psr & PSR_SYSCALL);
@@ -72,6 +74,14 @@
return (regs->psr &= ~PSR_SYSCALL);
}
+#define arch_ptrace_stop_needed(exit_code, info) \
+({ flush_user_windows(); \
+ current_thread_info()->w_saved != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+ synchronize_user_stack()
+
#define user_mode(regs) (!((regs)->psr & PSR_PS))
#define instruction_pointer(regs) ((regs)->pc)
#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index 84e969f..cd6fbfc 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -114,6 +114,7 @@
#ifdef __KERNEL__
#include <linux/threads.h>
+#include <asm/system.h>
static inline int pt_regs_trap_type(struct pt_regs *regs)
{
@@ -130,6 +131,14 @@
return (regs->tstate &= ~TSTATE_SYSCALL);
}
+#define arch_ptrace_stop_needed(exit_code, info) \
+({ flush_user_windows(); \
+ get_thread_wsaved() != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+ synchronize_user_stack()
+
struct global_reg_snapshot {
unsigned long tstate;
unsigned long tpc;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ac22bb7..19f0d97 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -482,7 +482,7 @@
The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
You can safely choose Y here. However, HPET will only be
activated if the platform and the BIOS support this feature.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index b815664..8e99073 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -520,6 +520,7 @@
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
+ depends on BROKEN
help
This adds a ptrace interface to the hardware's branch trace store.
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
index b7c0dea..61e08c0 100644
--- a/arch/x86/include/asm/vmi.h
+++ b/arch/x86/include/asm/vmi.h
@@ -223,9 +223,15 @@
} __attribute__((packed));
/* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
extern void vmi_init(void);
+extern void vmi_activate(void);
extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a7b6dec..0a60d60 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -235,8 +235,9 @@
status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
- if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
- printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+ if (unlikely(i == EXIT_LOOP_COUNT))
+ panic("AMD IOMMU: Completion wait loop failed\n");
+
out:
spin_unlock_irqrestore(&iommu->lock, flags);
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 30ae270..c6cc228 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -427,6 +427,10 @@
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
+ /* set head and tail to zero manually */
+ writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
return cmd_buf;
@@ -1074,7 +1078,8 @@
goto free;
/* IOMMU rlookup table - find the IOMMU for a specific device */
- amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+ amd_iommu_rlookup_table = (void *)__get_free_pages(
+ GFP_KERNEL | __GFP_ZERO,
get_order(rlookup_table_size));
if (amd_iommu_rlookup_table == NULL)
goto free;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 4b031a4..1c83803 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -510,12 +510,9 @@
*/
void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
{
- static cpumask_t mce_cpus = CPU_MASK_NONE;
-
mce_cpu_quirks(c);
if (mce_dont_init ||
- cpu_test_and_set(smp_processor_id(), mce_cpus) ||
!mce_available(c))
return;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 067d8de..a1f6ed5 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -811,7 +811,7 @@
out_nohpet:
hpet_clear_mapping();
- boot_hpet_disable = 1;
+ hpet_address = 0;
return 0;
}
@@ -834,10 +834,11 @@
hpet_address = force_hpet_address;
hpet_enable();
- if (!hpet_virt_address)
- return -ENODEV;
}
+ if (!hpet_virt_address)
+ return -ENODEV;
+
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
for_each_online_cpu(cpu) {
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 82fb280..c4b5b24 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -272,13 +272,18 @@
.name = "microcode",
};
-static void microcode_fini_cpu(int cpu)
+static void __microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- mutex_lock(µcode_mutex);
microcode_ops->microcode_fini_cpu(cpu);
uci->valid = 0;
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+ mutex_lock(µcode_mutex);
+ __microcode_fini_cpu(cpu);
mutex_unlock(µcode_mutex);
}
@@ -306,12 +311,16 @@
* to this cpu (a bit of paranoia):
*/
if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
- microcode_fini_cpu(cpu);
+ __microcode_fini_cpu(cpu);
+ printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
+ cpu);
return -1;
}
- if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
- microcode_fini_cpu(cpu);
+ if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
+ __microcode_fini_cpu(cpu);
+ printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
+ cpu);
/* Should we look for a new ucode here? */
return 1;
}
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 622dc4a..a8e6279 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -155,6 +155,7 @@
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+ unsigned long flags;
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
@@ -174,11 +175,16 @@
csig->pf = 1 << ((val[1] >> 18) & 7);
}
+ /* serialize access to the physical write to MSR 0x79 */
+ spin_lock_irqsave(µcode_update_lock, flags);
+
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
/* see notes above for revision 1.07. Apparent chip bug */
sync_core();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+
pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
csig->sig, csig->pf, csig->rev);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index ba7ad83..a35eaa3 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -745,10 +745,8 @@
unsigned long scratch;
long i;
- if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
- printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
+ if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
return;
- }
#ifndef CONFIG_AGP_AMD64
no_agp = 1;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 67465ed..309949e 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -168,6 +168,8 @@
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
+ ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
ich_force_enable_hpet);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9d5674f..bdec76e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -794,6 +794,9 @@
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
@@ -880,13 +883,8 @@
check_efer();
#endif
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7b10933..f71f96f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -294,9 +294,7 @@
* fragile that we want to limit the things done here to the
* most necessary things.
*/
-#ifdef CONFIG_VMI
vmi_bringup();
-#endif
cpu_init();
preempt_disable();
smp_callin();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 8b6c393..22fd657 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -960,8 +960,6 @@
void __init vmi_init(void)
{
- unsigned long flags;
-
if (!vmi_rom)
probe_vmi_rom();
else
@@ -973,13 +971,21 @@
reserve_top_address(-vmi_rom->virtual_top);
- local_irq_save(flags);
- activate_vmi();
-
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
+}
+
+void vmi_activate(void)
+{
+ unsigned long flags;
+
+ if (!vmi_rom)
+ return;
+
+ local_irq_save(flags);
+ activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index c029d3e..595b786 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -53,10 +53,17 @@
int xor_src_cnt;
dma_addr_t dma_dest;
- dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
- for (i = 0; i < src_cnt; i++)
+ /* map the dest bidrectional in case it is re-used as a source */
+ dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
+ for (i = 0; i < src_cnt; i++) {
+ /* only map the dest once */
+ if (unlikely(src_list[i] == dest)) {
+ dma_src[i] = dma_dest;
+ continue;
+ }
dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
len, DMA_TO_DEVICE);
+ }
while (src_cnt) {
async_flags = flags;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 7edf6d9..765fd1c 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,14 +688,6 @@
if (acpi_disabled)
return;
- /*
- * ACPI CA initializes acpi_dbg_level to non-zero, which means
- * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
- * Turn it off so we don't get output unless the user specifies
- * acpi.debug_level.
- */
- acpi_dbg_level = 0;
-
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d..40e60fc 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@
toshiba_acpi_exit();
return -ENOMEM;
}
- }
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR
+ "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ /* Toshiba USB ID */
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input,
+ SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR "unable to register kill-switch input device\n");
- toshiba_acpi_exit();
- return ret;
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR
+ "unable to register kill-switch input device\n");
+ toshiba_acpi_exit();
+ return ret;
+ }
}
return 0;
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 670551b..17ed5ac 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -64,7 +64,7 @@
/* Debug switch - layer (component) mask */
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
u32 acpi_gbl_nesting_level = 0;
/* Debugger globals */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5e2eb74..bc6695e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4050,17 +4050,70 @@
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
/* Seagate NCQ + FLUSH CACHE firmware bug */
- { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
+
+ { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
/* Blacklist entries taken from Silicon Image 3124/3132
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a098ba8..e0c4f05 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@
mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
- }
+ } else if (adev->class == ATA_DEV_ATAPI)
+ mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
return ata_bmdma_mode_filter(adev, mask);
}
@@ -211,11 +213,15 @@
static int hpt36x_cable_detect(struct ata_port *ap)
{
- u8 ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ata66;
+ /*
+ * Each channel of pata_hpt366 occupies separate PCI function
+ * as the primary channel and bit1 indicates the cable type.
+ */
pci_read_config_byte(pdev, 0x5A, &ata66);
- if (ata66 & (1 << ap->port_no))
+ if (ata66 & 2)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9364dc5..9f7c543 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1693,6 +1693,11 @@
for (i = 0; i <= h->highest_lun; i++) {
int j;
drv_found = 0;
+
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i].raid_level == -1)
+ continue;
+
for (j = 0; j < num_luns; j++) {
memcpy(&lunid, &ld_buff->LUN[j][0], 4);
lunid = le32_to_cpu(lunid);
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d16b024..7d2e91c 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2081,10 +2081,6 @@
if (!q)
return -ENXIO;
- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
cdi->last_sense = 0;
while (nframes) {
@@ -2096,9 +2092,17 @@
len = nr * CD_FRAMESIZE_RAW;
- ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
- if (ret)
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq) {
+ ret = -ENOMEM;
break;
+ }
+
+ ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
+ if (ret) {
+ blk_put_request(rq);
+ break;
+ }
rq->cmd[0] = GPCMD_READ_CD;
rq->cmd[1] = 1 << 2;
@@ -2124,6 +2128,7 @@
if (blk_rq_unmap_user(bio))
ret = -EFAULT;
+ blk_put_request(rq);
if (ret)
break;
@@ -2133,7 +2138,6 @@
ubuf += len;
}
- blk_put_request(rq);
return ret;
}
diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni
index 1f06889..bc61634 100644
--- a/drivers/char/cp437.uni
+++ b/drivers/char/cp437.uni
@@ -27,7 +27,7 @@
0x0c U+2640
0x0d U+266a
0x0e U+266b
-0x0f U+263c
+0x0f U+263c U+00a4
0x10 U+25b6 U+25ba
0x11 U+25c0 U+25c4
0x12 U+2195
@@ -55,7 +55,7 @@
0x24 U+0024
0x25 U+0025
0x26 U+0026
-0x27 U+0027
+0x27 U+0027 U+00b4
0x28 U+0028
0x29 U+0029
0x2a U+002a
@@ -84,7 +84,7 @@
0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
0x42 U+0042
0x43 U+0043 U+00a9
-0x44 U+0044
+0x44 U+0044 U+00d0
0x45 U+0045 U+00c8 U+00ca U+00cb
0x46 U+0046
0x47 U+0047
@@ -140,7 +140,7 @@
0x79 U+0079 U+00fd
0x7a U+007a
0x7b U+007b
-0x7c U+007c U+00a5
+0x7c U+007c U+00a6
0x7d U+007d
0x7e U+007e
#
@@ -263,10 +263,10 @@
0xe8 U+03a6 U+00d8
0xe9 U+0398
0xea U+03a9 U+2126
-0xeb U+03b4
+0xeb U+03b4 U+00f0
0xec U+221e
0xed U+03c6 U+00f8
-0xee U+03b5
+0xee U+03b5 U+2208
0xef U+2229
0xf0 U+2261
0xf1 U+00b1
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 53fdc7f..32b8bbf 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -46,7 +46,7 @@
/*
* The High Precision Event Timer driver.
* This driver is closely modelled after the rtc.c driver.
- * http://www.intel.com/hardwaredesign/hpetspec.htm
+ * http://www.intel.com/hardwaredesign/hpetspec_1.pdf
*/
#define HPET_USER_FREQ (64)
#define HPET_DRIFT (500)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index a5af607..008176e 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f796..05d8977 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252b..d4f419e 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b505..02225eb 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda45..4c9dd9a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d161319..f40ab69 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b..8cca119 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2007 Xilinx Inc.
* All rights reserved.
*
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index c201710..e1129fa 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -57,11 +57,6 @@
return v2;
}
-static cycle_t acpi_pm_read_slow(void)
-{
- return (cycle_t)acpi_pm_read_verified();
-}
-
static cycle_t acpi_pm_read(void)
{
return (cycle_t)read_pmtmr();
@@ -88,6 +83,11 @@
}
__setup("acpi_pm_good", acpi_pm_good_setup);
+static cycle_t acpi_pm_read_slow(void)
+{
+ return (cycle_t)acpi_pm_read_verified();
+}
+
static inline void acpi_pm_need_workaround(void)
{
clocksource_acpi_pm.read = acpi_pm_read_slow;
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 5317e08..6579965 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -388,7 +388,10 @@
init_completion(&device->done);
kref_init(&device->refcount);
+
+ mutex_lock(&dma_list_mutex);
device->dev_id = id++;
+ mutex_unlock(&dma_list_mutex);
/* represent channels in sysfs. Probably want devs too */
list_for_each_entry(chan, &device->channels, device_node) {
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index ecd743f..6607fdd 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1341,10 +1341,12 @@
*/
#define IOAT_TEST_SIZE 2000
+DECLARE_COMPLETION(test_completion);
static void ioat_dma_test_callback(void *dma_async_param)
{
printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
dma_async_param);
+ complete(&test_completion);
}
/**
@@ -1410,7 +1412,8 @@
goto free_resources;
}
device->common.device_issue_pending(dma_chan);
- msleep(1);
+
+ wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index c7a9306..6be3172 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -85,18 +85,28 @@
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
+ dma_addr_t dest;
+ src_cnt = unmap->unmap_src_cnt;
+ dest = iop_desc_get_dest_addr(unmap, iop_chan);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- addr = iop_desc_get_dest_addr(unmap, iop_chan);
- dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+
+ dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = iop_desc_get_src_addr(unmap,
iop_chan,
src_cnt);
+ if (addr == dest)
+ continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 0328da0..bcda174 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -311,17 +311,26 @@
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
+ dma_addr_t dest;
+ src_cnt = unmap->unmap_src_cnt;
+ dest = mv_desc_get_dest_addr(unmap);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- addr = mv_desc_get_dest_addr(unmap);
- dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor ? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+ dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = mv_desc_get_src_addr(unmap,
src_cnt);
+ if (addr == dest)
+ continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 5fcd3d8..4041e91 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -394,6 +394,12 @@
mutex_lock(&device_ctls_mutex);
+ /* If we are being removed, bail out immediately */
+ if (edac_dev->op_state == OP_OFFLINE) {
+ mutex_unlock(&device_ctls_mutex);
+ return;
+ }
+
/* Only poll controllers that are running polled and have a check */
if ((edac_dev->op_state == OP_RUNNING_POLL) &&
(edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@
/* mark this instance as OFFLINE */
edac_dev->op_state = OP_OFFLINE;
- /* clear workq processing on this instance */
- edac_device_workq_teardown(edac_dev);
-
/* deregister from global list */
del_edac_device_from_global_list(edac_dev);
mutex_unlock(&device_ctls_mutex);
+ /* clear workq processing on this instance */
+ edac_device_workq_teardown(edac_dev);
+
/* Tear down the sysfs entries for this instance */
edac_device_remove_sysfs(edac_dev);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 553dd4b..afa8a12 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -717,7 +717,7 @@
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
- value = 1;
+ value = dev_priv->has_gem;
break;
default:
DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@
dev_priv->regs = ioremap(base, size);
+#ifdef CONFIG_HIGHMEM64G
+ /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+ dev_priv->has_gem = 0;
+#else
+ /* enable GEM by default */
+ dev_priv->has_gem = 1;
+#endif
+
i915_gem_load(dev);
/* Init HWS */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index adc972c..b3cc473 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -106,6 +106,8 @@
typedef struct drm_i915_private {
struct drm_device *dev;
+ int has_gem;
+
void __iomem *regs;
drm_local_map_t *sarea;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad672d8..24fe8c1 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2309,7 +2309,14 @@
}
obj_priv = obj->driver_private;
- args->busy = obj_priv->active;
+ /* Don't count being on the flushing list against the object being
+ * done. Otherwise, a buffer left on the flushing list but not getting
+ * flushed (because nobody's flushing that domain) won't ever return
+ * unbusy and get reused by libdrm's bo cache. The other expected
+ * consumer of this interface, OpenGL's occlusion queries, also specs
+ * that the objects get unbusy "eventually" without any interference.
+ */
+ args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 99be114..8289e16 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,7 @@
else
dev_priv->irq_enable_reg &= ~mask;
- if (!dev->irq_enabled)
+ if (dev->irq_enabled)
RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
}
@@ -57,7 +57,7 @@
else
dev_priv->r500_disp_irq_reg &= ~mask;
- if (!dev->irq_enabled)
+ if (dev->irq_enabled)
RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
}
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 228f757..3fcf78e 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -365,6 +365,7 @@
pmsg = &msgs[tptr];
if (pmsg->flags & I2C_M_RD)
ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+ (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
1 * HZ);
else
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index f4d22ae..e5a8dae 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -92,7 +92,7 @@
static void smbus_write_data(u8 *src, u16 *dst, int len)
{
for (; len > 1; len -= 2) {
- *dst++ = be16_to_cpup((u16 *)src);
+ *dst++ = be16_to_cpup((__be16 *)src);
src += 2;
}
@@ -103,7 +103,7 @@
static void smbus_read_data(u16 *src, u8 *dst, int len)
{
for (; len > 1; len -= 2) {
- *(u16 *)dst = cpu_to_be16p(src++);
+ *(__be16 *)dst = cpu_to_be16p(src++);
dst += 2;
}
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dcf2045..0bdb2d7 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -486,7 +486,7 @@
if (cmd->type == MSP_TWI_CMD_WRITE ||
cmd->type == MSP_TWI_CMD_WRITE_READ) {
- __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e2..b7434d2 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -56,6 +56,7 @@
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
+ unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
@@ -507,7 +508,7 @@
unsigned long timeout;
int ret;
- if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+ if (i2c->suspended)
return -EIO;
ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@
}
#ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+ pm_message_t msg)
+{
+ struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+ i2c->suspended = 1;
+ return 0;
+}
+
static int s3c24xx_i2c_resume(struct platform_device *dev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
- if (i2c != NULL)
- s3c24xx_i2c_init(i2c);
+ i2c->suspended = 0;
+ s3c24xx_i2c_init(i2c);
return 0;
}
#else
+#define s3c24xx_i2c_suspend_late NULL
#define s3c24xx_i2c_resume NULL
#endif
@@ -1005,6 +1015,7 @@
static struct platform_driver s3c2410_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
+ .suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
@@ -1015,6 +1026,7 @@
static struct platform_driver s3c2440_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
+ .suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 53f079c..d8ede85 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -81,11 +81,12 @@
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
+ u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
+ mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index f1a8758..ec7f766 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -104,11 +104,12 @@
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
+ u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
+ mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index d333ae2..79ef5fd 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -115,8 +115,14 @@
return error;
}
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
{
+ /* Freecom FireWire Hard Drive firmware bug */
+ if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+ return 0;
+
return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
}
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index b9b7fc6..e1ece89 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -697,7 +697,7 @@
struct ads7846 *ts = container_of(handle, struct ads7846, timer);
int status = 0;
- spin_lock_irq(&ts->lock);
+ spin_lock(&ts->lock);
if (unlikely(!get_pendown_state(ts) ||
device_suspended(&ts->spi->dev))) {
@@ -728,7 +728,7 @@
dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
}
- spin_unlock_irq(&ts->lock);
+ spin_unlock(&ts->lock);
return HRTIMER_NORESTART;
}
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ac89a5d..ab7c8e4 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -208,16 +208,19 @@
*/
/* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+ struct page *page,
+ unsigned long index, int size)
{
/* choose a good rdev and read the page from there */
mdk_rdev_t *rdev;
struct list_head *tmp;
- struct page *page = alloc_page(GFP_KERNEL);
sector_t target;
if (!page)
+ page = alloc_page(GFP_KERNEL);
+ if (!page)
return ERR_PTR(-ENOMEM);
rdev_for_each(rdev, tmp, mddev) {
@@ -227,7 +230,9 @@
target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
- if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+ if (sync_page_io(rdev->bdev, target,
+ roundup(size, bdev_hardsect_size(rdev->bdev)),
+ page, READ)) {
page->index = index;
attach_page_buffers(page, NULL); /* so that free_buffer will
* quietly no-op */
@@ -544,7 +549,9 @@
bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
} else {
- bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+ bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+ NULL,
+ 0, sizeof(bitmap_super_t));
}
if (IS_ERR(bitmap->sb_page)) {
err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@
*/
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
+ read_sb_page(bitmap->mddev, bitmap->offset,
+ page,
+ index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;
} else {
- page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+ page = read_sb_page(bitmap->mddev, bitmap->offset,
+ NULL,
+ index, count);
offset = 0;
}
if (IS_ERR(page)) { /* read error */
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 73dc2ee..b34301d 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -9,11 +9,11 @@
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1420 if !DVB_FE_CUSTOMISE
select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a127a41..5cded37 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -628,12 +628,14 @@
}
/* try the cable dvb (stv0297) */
+ fc->fc_i2c_adap[0].no_base_addr = 1;
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_CABLE;
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
goto fe_found;
}
+ fc->fc_i2c_adap[0].no_base_addr = 0;
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
fc->fe = dvb_attach(mt312_attach,
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 43a112e..f13783f 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -47,9 +47,13 @@
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
ret;
- r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
ret = flexcop_i2c_operation(i2c->fc, &r100);
if (ret != 0) {
+ deb_i2c("Retrying operation\n");
+ r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+ ret = flexcop_i2c_operation(i2c->fc, &r100);
+ }
+ if (ret != 0) {
deb_i2c("read failed. %d\n", ret);
return ret;
}
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 7e9c090..27edb0e 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -8,7 +8,7 @@
select DVB_OR51211 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 62b68c2..49f7b20 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -24,8 +24,8 @@
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
@@ -34,7 +34,7 @@
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MB
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -73,11 +73,11 @@
select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select DVB_TUNER_DIB0070
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -95,7 +95,7 @@
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
@@ -107,11 +107,11 @@
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
@@ -124,9 +124,9 @@
tristate "Uli m920x DVB-T USB2.0 support"
depends on DVB_USB
select DVB_MT352 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
Currently, only devices with a product id of
@@ -137,7 +137,7 @@
tristate "Genesys Logic GL861 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
receiver with USB ID 0db0:5581.
@@ -146,7 +146,7 @@
tristate "Alcor Micro AU6610 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
@@ -198,8 +198,8 @@
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
@@ -235,8 +235,8 @@
config DVB_USB_AF9005
tristate "Afatech AF9005 DVB-T USB1.1 support"
depends on DVB_USB && EXPERIMENTAL
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
and the TerraTec Cinergy T USB XE (Rev.1)
@@ -284,7 +284,7 @@
tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
@@ -293,9 +293,9 @@
depends on DVB_USB && EXPERIMENTAL
select DVB_AF9013
select DVB_PLL if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f28d3ae..3917327 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -446,13 +446,13 @@
== NULL ? -ENODEV : 0;
}
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 867027c..401a04e 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -106,7 +106,7 @@
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
select VIDEO_IR
help
Support for simple SAA7146 based DVB cards
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index e6ca401..0ea85a0 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -831,7 +831,7 @@
{
int ret = -ENOIOCTLCMD;
- if (!file->f_op->ioctl)
+ if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
return ret;
switch (cmd) {
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index ef48565..8940b53 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -9,7 +9,7 @@
select VIDEO_CX2341X
select VIDEO_CS5345
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 8c1b7fa4..00f1e2e 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -11,16 +11,16 @@
select VIDEO_CX25840
select VIDEO_CX2341X
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
- select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Conexant 23885 based
TV cards.
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0b9e5fa..b0f8375 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -56,12 +56,12 @@
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_STB6000 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 610f535..4ea1f1e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -549,10 +549,11 @@
static void em28xx_config_i2c(struct em28xx *dev)
{
struct v4l2_routing route;
+ int zero = 0;
route.input = INPUT(dev->ctl_input)->vmux;
route.output = 0;
- em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+ em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
}
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 748a87e..02a6e9e 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1264,10 +1264,10 @@
struct gspca_dev *gspca_dev = priv;
int ret;
- if (mutex_lock_interruptible(&gspca_dev->usb_lock))
- return -ERESTARTSYS;
if (!gspca_dev->sd_desc->set_jcomp)
return -EINVAL;
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
mutex_unlock(&gspca_dev->usb_lock);
return ret;
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 19eb274..854c2a8 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -42,7 +42,7 @@
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
---help---
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 7021bbf..fc2164e 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -34,9 +34,9 @@
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_TDA10086 if !DVB_FE_CUSTOMISE
select DVB_TDA826X if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d62fd4f..ee09041 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2008,6 +2008,9 @@
return FAILED;
}
+ /* make sure we have no outstanding commands at this stage */
+ mptscsih_flush_running_cmds(hd);
+
ioc = hd->ioc;
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
ioc->name, SCpnt);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a1a3d0e..9e8222f 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -543,9 +543,9 @@
for (j = 0; j < bp->rx_max_pg_ring; j++) {
if (rxr->rx_pg_desc_ring[j])
pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
- rxr->rx_pg_desc_ring[i],
- rxr->rx_pg_desc_mapping[i]);
- rxr->rx_pg_desc_ring[i] = NULL;
+ rxr->rx_pg_desc_ring[j],
+ rxr->rx_pg_desc_mapping[j]);
+ rxr->rx_pg_desc_ring[j] = NULL;
}
if (rxr->rx_pg_ring)
vfree(rxr->rx_pg_ring);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 523b971..d115a6d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1893,12 +1893,17 @@
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
+ /* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- /* release the swflag because it is not reset by hardware reset */
- e1000_release_swflag_ich8lan(hw);
+ if (!ret_val) {
+ /* release the swflag because it is not reset by
+ * hardware reset
+ */
+ e1000_release_swflag_ich8lan(hw);
+ }
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c414554..36cb6e9 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -959,7 +959,7 @@
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += len;
ndev->last_rx = jiffies;
- netif_rx(skb);
+ netif_rx_ni(skb);
}
}
/*
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index f863aee..3f5d915 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -22,7 +22,7 @@
*/
#ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
#define DRV_NAME "jme"
#define DRV_VERSION "1.0.3"
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 536bda1..289fc26 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -105,8 +105,6 @@
return -EINVAL;
}
- bus->state = MDIOBUS_REGISTERED;
-
mutex_init(&bus->mdio_lock);
if (bus->reset)
@@ -123,6 +121,9 @@
}
}
+ if (!err)
+ bus->state = MDIOBUS_REGISTERED;
+
pr_info("%s: probed\n", bus->name);
return err;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 7e857e9..714a230 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -116,6 +116,7 @@
unsigned long last_xmit; /* jiffies when last pkt sent 9c */
unsigned long last_recv; /* jiffies when last pkt rcvd a0 */
struct net_device *dev; /* network interface device a4 */
+ int closing; /* is device closing down? a8 */
#ifdef CONFIG_PPP_MULTILINK
int nxchan; /* next channel to send something on */
u32 nxseq; /* next sequence number to send */
@@ -995,7 +996,7 @@
struct sk_buff *skb;
ppp_xmit_lock(ppp);
- if (ppp->dev) {
+ if (!ppp->closing) {
ppp_push(ppp);
while (!ppp->xmit_pending
&& (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@
ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
ppp_recv_lock(ppp);
- /* ppp->dev == 0 means interface is closing down */
- if (ppp->dev)
+ if (!ppp->closing)
ppp_receive_frame(ppp, skb, pch);
else
kfree_skb(skb);
@@ -2498,18 +2498,16 @@
*/
static void ppp_shutdown_interface(struct ppp *ppp)
{
- struct net_device *dev;
-
mutex_lock(&all_ppp_mutex);
- ppp_lock(ppp);
- dev = ppp->dev;
- ppp->dev = NULL;
- ppp_unlock(ppp);
/* This will call dev_close() for us. */
- if (dev) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
+ ppp_lock(ppp);
+ if (!ppp->closing) {
+ ppp->closing = 1;
+ ppp_unlock(ppp);
+ unregister_netdev(ppp->dev);
+ } else
+ ppp_unlock(ppp);
+
cardmap_set(&all_ppp_units, ppp->file.index, NULL);
ppp->file.dead = 1;
ppp->owner = NULL;
@@ -2554,7 +2552,7 @@
if (ppp->xmit_pending)
kfree_skb(ppp->xmit_pending);
- kfree(ppp);
+ free_netdev(ppp->dev);
}
/*
@@ -2616,7 +2614,7 @@
if (pch->file.hdrlen > ppp->file.hdrlen)
ppp->file.hdrlen = pch->file.hdrlen;
hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
- if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+ if (hdrlen > ppp->dev->hard_header_len)
ppp->dev->hard_header_len = hdrlen;
list_add_tail(&pch->clist, &ppp->channels);
++ppp->n_channels;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 1d2ef8f..5a40f2d 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1509,6 +1509,11 @@
desc->status = 0;
np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
}
+
+ if (*quota == 0) { /* out of rx quota */
+ retcode = 1;
+ goto out;
+ }
writew(np->rx_done, np->base + CompletionQConsumerIdx);
out:
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 1349e41..fed7eba 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1142,6 +1142,70 @@
return NETDEV_TX_OK;
}
+static void gem_pcs_reset(struct gem *gp)
+{
+ int limit;
+ u32 val;
+
+ /* Reset PCS unit. */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= PCS_MIICTRL_RST;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ limit = 32;
+ while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+ udelay(100);
+ if (limit-- <= 0)
+ break;
+ }
+ if (limit <= 0)
+ printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+ gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+ u32 val;
+
+ /* Make sure PCS is disabled while changing advertisement
+ * configuration.
+ */
+ val = readl(gp->regs + PCS_CFG);
+ val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Advertise all capabilities except assymetric
+ * pause.
+ */
+ val = readl(gp->regs + PCS_MIIADV);
+ val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+ PCS_MIIADV_SP | PCS_MIIADV_AP);
+ writel(val, gp->regs + PCS_MIIADV);
+
+ /* Enable and restart auto-negotiation, disable wrapback/loopback,
+ * and re-enable PCS.
+ */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+ val &= ~PCS_MIICTRL_WB;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ val = readl(gp->regs + PCS_CFG);
+ val |= PCS_CFG_ENABLE;
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Make sure serialink loopback is off. The meaning
+ * of this bit is logically inverted based upon whether
+ * you are in Serialink or SERDES mode.
+ */
+ val = readl(gp->regs + PCS_SCTRL);
+ if (gp->phy_type == phy_serialink)
+ val &= ~PCS_SCTRL_LOOP;
+ else
+ val |= PCS_SCTRL_LOOP;
+ writel(val, gp->regs + PCS_SCTRL);
+}
+
#define STOP_TRIES 32
/* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@
if (limit <= 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+ if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+ gem_pcs_reinit_adv(gp);
}
/* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@
gp->phy_type == phy_serdes) {
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
- if (pcs_lpa & PCS_MIIADV_FD)
+ if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
full_duplex = 1;
speed = SPEED_1000;
}
@@ -1488,6 +1555,9 @@
val = readl(gp->regs + PCS_MIISTAT);
if ((val & PCS_MIISTAT_LS) != 0) {
+ if (gp->lstate == link_up)
+ goto restart;
+
gp->lstate = link_up;
netif_carrier_on(gp->dev);
(void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@
if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
gp->phy_mii.def->ops->init(&gp->phy_mii);
} else {
- u32 val;
- int limit;
-
- /* Reset PCS unit. */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= PCS_MIICTRL_RST;
- writel(val, gp->regs + PCS_MIICTRL);
-
- limit = 32;
- while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
- udelay(100);
- if (limit-- <= 0)
- break;
- }
- if (limit <= 0)
- printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
- gp->dev->name);
-
- /* Make sure PCS is disabled while changing advertisement
- * configuration.
- */
- val = readl(gp->regs + PCS_CFG);
- val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
- writel(val, gp->regs + PCS_CFG);
-
- /* Advertise all capabilities except assymetric
- * pause.
- */
- val = readl(gp->regs + PCS_MIIADV);
- val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
- PCS_MIIADV_SP | PCS_MIIADV_AP);
- writel(val, gp->regs + PCS_MIIADV);
-
- /* Enable and restart auto-negotiation, disable wrapback/loopback,
- * and re-enable PCS.
- */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
- val &= ~PCS_MIICTRL_WB;
- writel(val, gp->regs + PCS_MIICTRL);
-
- val = readl(gp->regs + PCS_CFG);
- val |= PCS_CFG_ENABLE;
- writel(val, gp->regs + PCS_CFG);
-
- /* Make sure serialink loopback is off. The meaning
- * of this bit is logically inverted based upon whether
- * you are in Serialink or SERDES mode.
- */
- val = readl(gp->regs + PCS_SCTRL);
- if (gp->phy_type == phy_serialink)
- val &= ~PCS_SCTRL_LOOP;
- else
- val |= PCS_SCTRL_LOOP;
- writel(val, gp->regs + PCS_SCTRL);
+ gem_pcs_reset(gp);
+ gem_pcs_reinit_adv(gp);
}
/* Default aneg parameters */
@@ -2680,6 +2697,21 @@
cmd->speed = 0;
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
+
+ /* serdes means usually a Fibre connector, with most fixed */
+ if (gp->phy_type == phy_serdes) {
+ cmd->port = PORT_FIBRE;
+ cmd->supported = (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ cmd->advertising = cmd->supported;
+ cmd->transceiver = XCVR_INTERNAL;
+ if (gp->lstate == link_up)
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->autoneg = 1;
+ }
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c41d687..e604982 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1098,6 +1098,7 @@
dma_addr_t tail_list_phys;
u8 *tail_buffer;
unsigned long flags;
+ unsigned int txlen;
if ( ! priv->phyOnline ) {
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
@@ -1108,6 +1109,7 @@
if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
return 0;
+ txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
tail_list = priv->txList + priv->txTail;
tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
@@ -1125,16 +1127,16 @@
if ( bbuf ) {
tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
- skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+ skb_copy_from_linear_data(skb, tail_buffer, txlen);
} else {
tail_list->buffer[0].address = pci_map_single(priv->pciDev,
- skb->data, skb->len,
+ skb->data, txlen,
PCI_DMA_TODEVICE);
TLan_StoreSKB(tail_list, skb);
}
- tail_list->frameSize = (u16) skb->len;
- tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+ tail_list->frameSize = (u16) txlen;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
tail_list->buffer[1].count = 0;
tail_list->buffer[1].address = 0;
@@ -1431,7 +1433,9 @@
if ( ! bbuf ) {
struct sk_buff *skb = TLan_GetSKB(head_list);
pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
- skb->len, PCI_DMA_TODEVICE);
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
head_list->buffer[8].address = 0;
head_list->buffer[9].address = 0;
@@ -2055,9 +2059,12 @@
list = priv->txList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
- pci_unmap_single(priv->pciDev,
- list->buffer[0].address, skb->len,
- PCI_DMA_TODEVICE);
+ pci_unmap_single(
+ priv->pciDev,
+ list->buffer[0].address,
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index f9e244d..9bcb6cb 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -113,7 +113,7 @@
u8 device; /* pci device# */
- u32 sun; /* ACPI _SUN (slot unique number) */
+ unsigned long long sun; /* ACPI _SUN (slot unique number) */
u32 flags; /* see below */
};
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 95b536a..43c10bd 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -337,7 +337,7 @@
slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+ snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
retval = pci_hp_register(slot->hotplug_slot,
acpiphp_slot->bridge->pci_bus,
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 955aae4..3affc64 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -255,13 +255,13 @@
bridge->nr_slots++;
- dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+ dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
slot->sun, pci_domain_nr(bridge->pci_bus),
bridge->pci_bus->number, slot->device);
retval = acpiphp_register_hotplug_slot(slot);
if (retval) {
if (retval == -EBUSY)
- warn("Slot %d already registered by another "
+ warn("Slot %llu already registered by another "
"hotplug driver\n", slot->sun);
else
warn("acpiphp_register_hotplug_slot failed "
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index c892daa..633e743 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1402,10 +1402,6 @@
goto error;
}
- /* lock ourselves into memory with a module
- * count of -1 so that no one can unload us. */
- module_put(THIS_MODULE);
-
exit:
return rc;
@@ -1423,4 +1419,3 @@
}
module_init(ibmphp_init);
-module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 4b23bc3..39cf248 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -432,18 +432,19 @@
goto err_out_release_ctlr;
}
+ /* Check if slot is occupied */
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
- t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
- if (value && pciehp_force) {
- rc = pciehp_enable_slot(t_slot);
- if (rc) /* -ENODEV: shouldn't happen, but deal with it */
- value = 0;
- }
- if ((POWER_CTRL(ctrl)) && !value) {
- rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
- if (rc)
- goto err_out_free_ctrl_slot;
+ t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+ if (value) {
+ if (pciehp_force)
+ pciehp_enable_slot(t_slot);
+ } else {
+ /* Power off slot if not occupied */
+ if (POWER_CTRL(ctrl)) {
+ rc = t_slot->hpc_ops->power_off_slot(t_slot);
+ if (rc)
+ goto err_out_free_ctrl_slot;
+ }
}
return 0;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index dfc63d0..aac7006 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -252,7 +252,7 @@
if (!dev->driver ||
!dev->driver->err_handler ||
- !dev->driver->err_handler->slot_reset)
+ !dev->driver->err_handler->resume)
return;
err_handler = dev->driver->err_handler;
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb73388..b59d411 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@
module_init(bfin_cf_init);
module_exit(bfin_cf_exit);
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 2cd77ab..054e052 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -328,6 +328,13 @@
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+ /* The clock has an 8 bit wide bcd-coded register (they never learn)
+ * for the year. tm_year is an offset from 1900 and we are interested
+ * in the 2000-2099 range, so any value less than 100 is invalid.
+ */
+ if (tm->tm_year < 100)
+ return -EINVAL;
+
regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 162cd92..94acbee 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -175,8 +175,8 @@
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
{ aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
- { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
- { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
{ aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
{ aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9aec4ca..f7da753 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -107,6 +107,7 @@
struct request *req;
int ret;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -121,7 +122,6 @@
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
@@ -136,8 +136,10 @@
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
- if (ret == SCSI_DH_IMM_RETRY)
+ if (ret == SCSI_DH_IMM_RETRY) {
+ blk_put_request(req);
goto retry;
+ }
if (ret == SCSI_DH_DEV_OFFLINED) {
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
@@ -200,6 +202,7 @@
struct request *req;
int ret, retry;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -216,7 +219,6 @@
req->sense_len = 0;
retry = h->retries;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
@@ -231,8 +233,10 @@
ret = SCSI_DH_OK;
if (ret == SCSI_DH_RETRY) {
- if (--retry)
+ if (--retry) {
+ blk_put_request(req);
goto retry;
+ }
ret = SCSI_DH_IO;
}
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 2a5b29d..e2dd6a4 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -864,21 +864,23 @@
INIT_WORK(&vport->crq_work, handle_crq);
- err = crq_queue_create(&vport->crq_queue, target);
+ err = scsi_add_host(shost, target->dev);
if (err)
goto free_srp_target;
- err = scsi_add_host(shost, target->dev);
- if (err)
- goto destroy_queue;
-
err = scsi_tgt_alloc_queue(shost);
if (err)
- goto destroy_queue;
+ goto remove_host;
+
+ err = crq_queue_create(&vport->crq_queue, target);
+ if (err)
+ goto free_queue;
return 0;
-destroy_queue:
- crq_queue_destroy(target);
+free_queue:
+ scsi_tgt_free_queue(shost);
+remove_host:
+ scsi_remove_host(shost);
free_srp_target:
srp_target_free(target);
put_host:
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 801c7cf..3fdee73 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -489,12 +489,6 @@
if (!__kfifo_get(session->cmdpool.queue,
(void*)&task, sizeof(void*)))
return NULL;
-
- if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
- hdr->ttt == RESERVED_ITT) {
- conn->ping_task = task;
- conn->last_ping = jiffies;
- }
}
/*
* released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@
task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
if (!task)
iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+ else if (!rhdr) {
+ /* only track our nops */
+ conn->ping_task = task;
+ conn->last_ping = jiffies;
+ }
}
static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fa45a1a..148d3af 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -648,8 +648,8 @@
struct request *req = cmd->request;
unsigned long flags;
- scsi_unprep_request(req);
spin_lock_irqsave(q->queue_lock, flags);
+ scsi_unprep_request(req);
blk_requeue_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index d1812d3..63f0de2 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -827,7 +827,7 @@
maple_queue_cache =
kmem_cache_create("maple_queue_cache", 0x400, 0,
- SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+ SLAB_HWCACHE_ALIGN, NULL);
if (!maple_queue_cache)
goto cleanup_bothirqs;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286..5d457c9 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@
If in doubt, say N here.
+if STAGING
+
config STAGING_EXCLUDE_BUILD
bool "Exclude Staging drivers from being built" if STAGING
default y
@@ -62,3 +64,4 @@
source "drivers/staging/poch/Kconfig"
endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657..43a863c 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@
{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
{ 0, } /* terminating entry */
};
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
/*
* This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d..8c08130 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@
* altsetting means creating new endpoint device entries).
* When either of these happens, defer the Set-Interface.
*/
- if (!error && intf->dev.power.status == DPM_ON)
+ if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+ ; /* Already in altsetting 0 so skip Set-Interface */
+ else if (!error && intf->dev.power.status == DPM_ON)
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b599..3a8bb53 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@
fs_in_desc.bEndpointAddress;
hs_out_desc.bEndpointAddress =
fs_out_desc.bEndpointAddress;
+ hs_notify_desc.bEndpointAddress =
+ fs_notify_desc.bEndpointAddress;
/* copy descriptors, and track endpoint copies */
f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@
f->hs_descriptors, &hs_in_desc);
rndis->hs.out = usb_find_endpoint(eth_hs_function,
f->hs_descriptors, &hs_out_desc);
+ rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_notify_desc);
}
rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359..fb6f293 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992..373ee09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
/* AlphaMicro Components AMC-232USB01 device */
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
/* the VID is the standard ftdi vid (FTDI_VID) */
#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
/* OpenDCC (www.opendcc.de) product id */
#define FTDI_OPENDCC_PID 0xBFD8
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c885..1aed584 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+ { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039..54974f4 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
#define YCCABLE_VENDOR_ID 0x05ad
#define YCCABLE_PRODUCT_ID 0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID 0x5372
+#define SUPERIAL_PRODUCT_ID 0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID 0x03f0
+#define HP_LD220_PRODUCT_ID 0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1..01d0c70 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
* For questions or problems with this driver, contact Texas Instruments
* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
* Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*} # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * s=$1
- * shift
- * for i
- * do
- * if [[ $s -eq $i ]]
- * then
- * return 0
- * fi
- * done
- * return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
*/
#include <linux/kernel.h>
@@ -457,9 +407,10 @@
goto free_tdev;
}
- /* the second configuration must be set (in sysfs by hotplug script) */
+ /* the second configuration must be set */
if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
- status = -ENODEV;
+ status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+ status = status ? status : -ENODEV;
goto free_tdev;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bf..bfcc1fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551,
+ "Nokia",
+ "3500c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601,
+ "Nokia",
+ "Nokia 3109c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701,
"Nokia",
"5310",
US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 0d15b0e..5139c25 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -356,7 +356,9 @@
w1_write_8(sl->master, W1_SKIP_ROM);
else {
u8 match[9] = {W1_MATCH_ROM, };
- memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+ u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+ memcpy(&match[1], &rn, 8);
w1_write_block(sl->master, match, 9);
}
return 0;
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index 3031e32..2a983d4 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -45,7 +45,7 @@
struct v9fs_dentry *dent;
P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n",
- fid->fid, dentry->d_iname);
+ fid->fid, dentry->d_name.name);
dent = dentry->d_fsdata;
if (!dent) {
@@ -79,7 +79,7 @@
struct p9_fid *fid, *ret;
P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n",
- dentry->d_iname, dentry, uid, any);
+ dentry->d_name.name, dentry, uid, any);
dent = (struct v9fs_dentry *) dentry->d_fsdata;
ret = NULL;
if (dent) {
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 24eb010..332b5ff0 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -160,7 +160,7 @@
v9ses->flags |= V9FS_ACCESS_ANY;
else {
v9ses->flags |= V9FS_ACCESS_SINGLE;
- v9ses->uid = simple_strtol(s, &e, 10);
+ v9ses->uid = simple_strtoul(s, &e, 10);
if (*e != '\0')
v9ses->uid = ~0;
}
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index f9534f1..06dcc7c 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -52,7 +52,8 @@
static int v9fs_dentry_delete(struct dentry *dentry)
{
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
return 1;
}
@@ -69,7 +70,8 @@
static int v9fs_cached_dentry_delete(struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
if(!inode)
return 1;
@@ -88,7 +90,8 @@
struct v9fs_dentry *dent;
struct p9_fid *temp, *current_fid;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
dent = dentry->d_fsdata;
if (dent) {
list_for_each_entry_safe(current_fid, temp, &dent->fidlist,
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 8314d3f..2dfcf54 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -963,7 +963,8 @@
if (buflen > PATH_MAX)
buflen = PATH_MAX;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
retval = v9fs_readlink(dentry, link, buflen);
@@ -1022,7 +1023,8 @@
{
char *s = nd_get_link(nd);
- P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s);
+ P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name,
+ IS_ERR(s) ? "<error>" : s);
if (!IS_ERR(s))
__putname(s);
}
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2af8626..6d51696 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3983,7 +3983,8 @@
node->flags = le16_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
- __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+ __le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+ GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
node->path_consumed = hostlen_fromUCS(tmp,
diff --git a/fs/exec.c b/fs/exec.c
index ec5df9a..b4e5b8a 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -772,7 +772,6 @@
struct signal_struct *sig = tsk->signal;
struct sighand_struct *oldsighand = tsk->sighand;
spinlock_t *lock = &oldsighand->siglock;
- struct task_struct *leader = NULL;
int count;
if (thread_group_empty(tsk))
@@ -810,7 +809,7 @@
* and to assume its PID:
*/
if (!thread_group_leader(tsk)) {
- leader = tsk->group_leader;
+ struct task_struct *leader = tsk->group_leader;
sig->notify_count = -1; /* for exit_notify() */
for (;;) {
@@ -862,8 +861,9 @@
BUG_ON(leader->exit_state != EXIT_ZOMBIE);
leader->exit_state = EXIT_DEAD;
-
write_unlock_irq(&tasklist_lock);
+
+ release_task(leader);
}
sig->group_exit_task = NULL;
@@ -872,8 +872,6 @@
no_thread_group:
exit_itimers(sig);
flush_itimer_signals();
- if (leader)
- release_task(leader);
if (atomic_read(&oldsighand->count) != 1) {
struct sighand_struct *newsighand;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 5f180cf..5e0c0d0 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -86,7 +86,8 @@
#define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask) \
OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
-#define OCFS2_FEATURE_COMPAT_SUPP OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP (OCFS2_FEATURE_COMPAT_BACKUP_SB \
+ | OCFS2_FEATURE_COMPAT_JBD2_SB)
#define OCFS2_FEATURE_INCOMPAT_SUPP (OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
| OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
| OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
@@ -153,6 +154,11 @@
#define OCFS2_FEATURE_COMPAT_BACKUP_SB 0x0001
/*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB 0x0002
+
+/*
* Unwritten extents support.
*/
#define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN 0x0001
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 054e2ef..74d7367 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -2645,9 +2645,9 @@
return ret;
}
- i = xs->here - old_xh->xh_entries;
- xs->here = &xs->header->xh_entries[i];
}
+ i = xs->here - old_xh->xh_entries;
+ xs->here = &xs->header->xh_entries[i];
}
return ret;
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index 09d33c7..db8852d 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -172,7 +172,7 @@
/* Defaults for debug_level, debug and normal */
-#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO)
#define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
#define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 029c8c0..0515e75 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -141,6 +141,10 @@
/*
* We need to show where it is safe to preempt execution of ACPICA
*/
-#define ACPI_PREEMPTION_POINT() cond_resched()
+#define ACPI_PREEMPTION_POINT() \
+ do { \
+ if (!irqs_disabled()) \
+ cond_resched(); \
+ } while (0)
#endif /* __ACLINUX_H__ */
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 3eba438..bd37078 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -43,26 +43,6 @@
};
/*
- * hrtimer callback modes:
- *
- * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context
- * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context
- * Special mode for tick emulation and
- * scheduler timer. Such timers are per
- * cpu and not allowed to be migrated on
- * cpu unplug.
- * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context
- * with timer->base lock unlocked
- * used for timers which call wakeup to
- * avoid lock order problems with rq->lock
- */
-enum hrtimer_cb_mode {
- HRTIMER_CB_SOFTIRQ,
- HRTIMER_CB_IRQSAFE_PERCPU,
- HRTIMER_CB_IRQSAFE_UNLOCKED,
-};
-
-/*
* Values to track state of the timer
*
* Possible states:
@@ -70,7 +50,6 @@
* 0x00 inactive
* 0x01 enqueued into rbtree
* 0x02 callback function running
- * 0x04 callback pending (high resolution mode)
*
* Special cases:
* 0x03 callback function running and enqueued
@@ -92,8 +71,7 @@
#define HRTIMER_STATE_INACTIVE 0x00
#define HRTIMER_STATE_ENQUEUED 0x01
#define HRTIMER_STATE_CALLBACK 0x02
-#define HRTIMER_STATE_PENDING 0x04
-#define HRTIMER_STATE_MIGRATE 0x08
+#define HRTIMER_STATE_MIGRATE 0x04
/**
* struct hrtimer - the basic hrtimer structure
@@ -109,8 +87,6 @@
* @function: timer expiry callback function
* @base: pointer to the timer base (per cpu and per clock)
* @state: state information (See bit values above)
- * @cb_mode: high resolution timer feature to select the callback execution
- * mode
* @cb_entry: list head to enqueue an expired timer into the callback list
* @start_site: timer statistics field to store the site where the timer
* was started
@@ -129,7 +105,6 @@
struct hrtimer_clock_base *base;
unsigned long state;
struct list_head cb_entry;
- enum hrtimer_cb_mode cb_mode;
#ifdef CONFIG_TIMER_STATS
int start_pid;
void *start_site;
@@ -188,15 +163,11 @@
* @check_clocks: Indictator, when set evaluate time source and clock
* event devices whether high resolution mode can be
* activated.
- * @cb_pending: Expired timers are moved from the rbtree to this
- * list in the timer interrupt. The list is processed
- * in the softirq.
* @nr_events: Total number of timer interrupt events
*/
struct hrtimer_cpu_base {
spinlock_t lock;
struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES];
- struct list_head cb_pending;
#ifdef CONFIG_HIGH_RES_TIMERS
ktime_t expires_next;
int hres_active;
@@ -404,8 +375,7 @@
*/
static inline int hrtimer_is_queued(struct hrtimer *timer)
{
- return timer->state &
- (HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING);
+ return timer->state & HRTIMER_STATE_ENQUEUED;
}
/*
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index f58a0cf..d6210a9 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -251,9 +251,6 @@
BLOCK_SOFTIRQ,
TASKLET_SOFTIRQ,
SCHED_SOFTIRQ,
-#ifdef CONFIG_HIGH_RES_TIMERS
- HRTIMER_SOFTIRQ,
-#endif
RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
NR_SOFTIRQS
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9d77b1d..e26f549 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -319,6 +319,7 @@
{
NAPI_STATE_SCHED, /* Poll is scheduled */
NAPI_STATE_DISABLE, /* Disable pending */
+ NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */
};
extern void __napi_schedule(struct napi_struct *n);
@@ -1497,6 +1498,12 @@
{
unsigned long flags;
+ /*
+ * don't let napi dequeue from the cpu poll list
+ * just in case its running on a different cpu
+ */
+ if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+ return;
local_irq_save(flags);
__netif_rx_complete(dev, napi);
local_irq_restore(flags);
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index c19595c..29fe9ea 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -141,6 +141,7 @@
#define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
enum ctattr_natseq {
+ CTA_NAT_SEQ_UNSPEC,
CTA_NAT_SEQ_CORRECTION_POS,
CTA_NAT_SEQ_OFFSET_BEFORE,
CTA_NAT_SEQ_OFFSET_AFTER,
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index a7c7213..4f71bf4 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -45,7 +45,11 @@
int it_requeue_pending; /* waiting to requeue this timer */
#define REQUEUE_PENDING 1
int it_sigev_notify; /* notify word of sigevent struct */
- struct task_struct *it_process; /* process to send signal to */
+ struct signal_struct *it_signal;
+ union {
+ struct pid *it_pid; /* pid of process to send signal to */
+ struct task_struct *it_process; /* for clock_nanosleep */
+ };
struct sigqueue *sigq; /* signal queue entry. */
union {
struct {
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3f9a600..6e7ba16 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -146,6 +146,8 @@
})
#define smp_call_function_mask(mask, func, info, wait) \
(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+ (up_smp_call_function(func, info))
static inline void init_call_single_data(void)
{
}
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4e..9b42bae 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@
* (rarely) accepted by SET_DESCRIPTOR.
*
* Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
*/
/*
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
index 3025ae1..94c852d 100644
--- a/include/net/irda/irda_device.h
+++ b/include/net/irda/irda_device.h
@@ -135,9 +135,11 @@
/*
* Per-packet information we need to hide inside sk_buff
- * (must not exceed 48 bytes, check with struct sk_buff)
+ * (must not exceed 48 bytes, check with struct sk_buff)
+ * The default_qdisc_pad field is a temporary hack.
*/
struct irda_skb_cb {
+ unsigned int default_qdisc_pad;
magic_t magic; /* Be sure that we can trust the information */
__u32 next_speed; /* The Speed to be set *after* this frame */
__u16 mtt; /* Minimum turn around time */
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fe00b3b..2606d0f 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -702,7 +702,7 @@
* any child cgroups exist. This is theoretically supportable
* but involves complex error handling, so it's being left until
* later */
- if (!list_empty(&cgrp->children))
+ if (root->number_of_cgroups > 1)
return -EBUSY;
/* Process each subsystem */
@@ -1024,7 +1024,7 @@
if (ret == -EBUSY) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
- goto drop_new_super;
+ goto free_cg_links;
}
/* EBUSY should be the only error here */
@@ -1073,10 +1073,11 @@
return simple_set_mnt(mnt, sb);
+ free_cg_links:
+ free_cg_links(&tmp_cg_links);
drop_new_super:
up_write(&sb->s_umount);
deactivate_super(sb);
- free_cg_links(&tmp_cg_links);
return ret;
}
@@ -2934,9 +2935,6 @@
again:
root = subsys->root;
if (root == &rootnode) {
- printk(KERN_INFO
- "Not cloning cgroup for unused subsystem %s\n",
- subsys->name);
mutex_unlock(&cgroup_mutex);
return 0;
}
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 47e6334..bda9cb9 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -442,22 +442,6 @@
static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
#endif
-/*
- * Check, whether the timer is on the callback pending list
- */
-static inline int hrtimer_cb_pending(const struct hrtimer *timer)
-{
- return timer->state & HRTIMER_STATE_PENDING;
-}
-
-/*
- * Remove a timer from the callback pending list
- */
-static inline void hrtimer_remove_cb_pending(struct hrtimer *timer)
-{
- list_del_init(&timer->cb_entry);
-}
-
/* High resolution timer related functions */
#ifdef CONFIG_HIGH_RES_TIMERS
@@ -651,6 +635,8 @@
{
}
+static void __run_hrtimer(struct hrtimer *timer);
+
/*
* When High resolution timers are active, try to reprogram. Note, that in case
* the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
@@ -661,31 +647,14 @@
struct hrtimer_clock_base *base)
{
if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
-
- /* Timer is expired, act upon the callback mode */
- switch(timer->cb_mode) {
- case HRTIMER_CB_IRQSAFE_PERCPU:
- case HRTIMER_CB_IRQSAFE_UNLOCKED:
- /*
- * This is solely for the sched tick emulation with
- * dynamic tick support to ensure that we do not
- * restart the tick right on the edge and end up with
- * the tick timer in the softirq ! The calling site
- * takes care of this. Also used for hrtimer sleeper !
- */
- debug_hrtimer_deactivate(timer);
- return 1;
- case HRTIMER_CB_SOFTIRQ:
- /*
- * Move everything else into the softirq pending list !
- */
- list_add_tail(&timer->cb_entry,
- &base->cpu_base->cb_pending);
- timer->state = HRTIMER_STATE_PENDING;
- return 1;
- default:
- BUG();
- }
+ /*
+ * XXX: recursion check?
+ * hrtimer_forward() should round up with timer granularity
+ * so that we never get into inf recursion here,
+ * it doesn't do that though
+ */
+ __run_hrtimer(timer);
+ return 1;
}
return 0;
}
@@ -724,11 +693,6 @@
return 1;
}
-static inline void hrtimer_raise_softirq(void)
-{
- raise_softirq(HRTIMER_SOFTIRQ);
-}
-
#else
static inline int hrtimer_hres_active(void) { return 0; }
@@ -747,7 +711,6 @@
{
return 0;
}
-static inline void hrtimer_raise_softirq(void) { }
#endif /* CONFIG_HIGH_RES_TIMERS */
@@ -890,10 +853,7 @@
struct hrtimer_clock_base *base,
unsigned long newstate, int reprogram)
{
- /* High res. callback list. NOP for !HIGHRES */
- if (hrtimer_cb_pending(timer))
- hrtimer_remove_cb_pending(timer);
- else {
+ if (timer->state & HRTIMER_STATE_ENQUEUED) {
/*
* Remove the timer from the rbtree and replace the
* first entry pointer if necessary.
@@ -953,7 +913,7 @@
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
- int ret, raise;
+ int ret;
base = lock_hrtimer_base(timer, &flags);
@@ -988,26 +948,8 @@
enqueue_hrtimer(timer, new_base,
new_base->cpu_base == &__get_cpu_var(hrtimer_bases));
- /*
- * The timer may be expired and moved to the cb_pending
- * list. We can not raise the softirq with base lock held due
- * to a possible deadlock with runqueue lock.
- */
- raise = timer->state == HRTIMER_STATE_PENDING;
-
- /*
- * We use preempt_disable to prevent this task from migrating after
- * setting up the softirq and raising it. Otherwise, if me migrate
- * we will raise the softirq on the wrong CPU.
- */
- preempt_disable();
-
unlock_hrtimer_base(timer, &flags);
- if (raise)
- hrtimer_raise_softirq();
- preempt_enable();
-
return ret;
}
EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
@@ -1192,75 +1134,6 @@
}
EXPORT_SYMBOL_GPL(hrtimer_get_res);
-static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base)
-{
- spin_lock_irq(&cpu_base->lock);
-
- while (!list_empty(&cpu_base->cb_pending)) {
- enum hrtimer_restart (*fn)(struct hrtimer *);
- struct hrtimer *timer;
- int restart;
- int emulate_hardirq_ctx = 0;
-
- timer = list_entry(cpu_base->cb_pending.next,
- struct hrtimer, cb_entry);
-
- debug_hrtimer_deactivate(timer);
- timer_stats_account_hrtimer(timer);
-
- fn = timer->function;
- /*
- * A timer might have been added to the cb_pending list
- * when it was migrated during a cpu-offline operation.
- * Emulate hardirq context for such timers.
- */
- if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
- timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED)
- emulate_hardirq_ctx = 1;
-
- __remove_hrtimer(timer, timer->base, HRTIMER_STATE_CALLBACK, 0);
- spin_unlock_irq(&cpu_base->lock);
-
- if (unlikely(emulate_hardirq_ctx)) {
- local_irq_disable();
- restart = fn(timer);
- local_irq_enable();
- } else
- restart = fn(timer);
-
- spin_lock_irq(&cpu_base->lock);
-
- timer->state &= ~HRTIMER_STATE_CALLBACK;
- if (restart == HRTIMER_RESTART) {
- BUG_ON(hrtimer_active(timer));
- /*
- * Enqueue the timer, allow reprogramming of the event
- * device
- */
- enqueue_hrtimer(timer, timer->base, 1);
- } else if (hrtimer_active(timer)) {
- /*
- * If the timer was rearmed on another CPU, reprogram
- * the event device.
- */
- struct hrtimer_clock_base *base = timer->base;
-
- if (base->first == &timer->node &&
- hrtimer_reprogram(timer, base)) {
- /*
- * Timer is expired. Thus move it from tree to
- * pending list again.
- */
- __remove_hrtimer(timer, base,
- HRTIMER_STATE_PENDING, 0);
- list_add_tail(&timer->cb_entry,
- &base->cpu_base->cb_pending);
- }
- }
- }
- spin_unlock_irq(&cpu_base->lock);
-}
-
static void __run_hrtimer(struct hrtimer *timer)
{
struct hrtimer_clock_base *base = timer->base;
@@ -1268,25 +1141,21 @@
enum hrtimer_restart (*fn)(struct hrtimer *);
int restart;
+ WARN_ON(!irqs_disabled());
+
debug_hrtimer_deactivate(timer);
__remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
timer_stats_account_hrtimer(timer);
-
fn = timer->function;
- if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
- timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) {
- /*
- * Used for scheduler timers, avoid lock inversion with
- * rq->lock and tasklist_lock.
- *
- * These timers are required to deal with enqueue expiry
- * themselves and are not allowed to migrate.
- */
- spin_unlock(&cpu_base->lock);
- restart = fn(timer);
- spin_lock(&cpu_base->lock);
- } else
- restart = fn(timer);
+
+ /*
+ * Because we run timers from hardirq context, there is no chance
+ * they get migrated to another cpu, therefore its safe to unlock
+ * the timer base.
+ */
+ spin_unlock(&cpu_base->lock);
+ restart = fn(timer);
+ spin_lock(&cpu_base->lock);
/*
* Note: We clear the CALLBACK bit after enqueue_hrtimer to avoid
@@ -1311,7 +1180,7 @@
struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
struct hrtimer_clock_base *base;
ktime_t expires_next, now;
- int i, raise = 0;
+ int i;
BUG_ON(!cpu_base->hres_active);
cpu_base->nr_events++;
@@ -1360,16 +1229,6 @@
break;
}
- /* Move softirq callbacks to the pending list */
- if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) {
- __remove_hrtimer(timer, base,
- HRTIMER_STATE_PENDING, 0);
- list_add_tail(&timer->cb_entry,
- &base->cpu_base->cb_pending);
- raise = 1;
- continue;
- }
-
__run_hrtimer(timer);
}
spin_unlock(&cpu_base->lock);
@@ -1383,10 +1242,6 @@
if (tick_program_event(expires_next, 0))
goto retry;
}
-
- /* Raise softirq ? */
- if (raise)
- raise_softirq(HRTIMER_SOFTIRQ);
}
/**
@@ -1413,11 +1268,6 @@
local_irq_restore(flags);
}
-static void run_hrtimer_softirq(struct softirq_action *h)
-{
- run_hrtimer_pending(&__get_cpu_var(hrtimer_bases));
-}
-
#endif /* CONFIG_HIGH_RES_TIMERS */
/*
@@ -1429,8 +1279,6 @@
*/
void hrtimer_run_pending(void)
{
- struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
if (hrtimer_hres_active())
return;
@@ -1444,8 +1292,6 @@
*/
if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
hrtimer_switch_to_hres();
-
- run_hrtimer_pending(cpu_base);
}
/*
@@ -1482,14 +1328,6 @@
hrtimer_get_expires_tv64(timer))
break;
- if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) {
- __remove_hrtimer(timer, base,
- HRTIMER_STATE_PENDING, 0);
- list_add_tail(&timer->cb_entry,
- &base->cpu_base->cb_pending);
- continue;
- }
-
__run_hrtimer(timer);
}
spin_unlock(&cpu_base->lock);
@@ -1516,9 +1354,6 @@
{
sl->timer.function = hrtimer_wakeup;
sl->task = task;
-#ifdef CONFIG_HIGH_RES_TIMERS
- sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
-#endif
}
static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
@@ -1655,18 +1490,16 @@
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
cpu_base->clock_base[i].cpu_base = cpu_base;
- INIT_LIST_HEAD(&cpu_base->cb_pending);
hrtimer_init_hres(cpu_base);
}
#ifdef CONFIG_HOTPLUG_CPU
-static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
- struct hrtimer_clock_base *new_base, int dcpu)
+static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
+ struct hrtimer_clock_base *new_base)
{
struct hrtimer *timer;
struct rb_node *node;
- int raise = 0;
while ((node = rb_first(&old_base->active))) {
timer = rb_entry(node, struct hrtimer, node);
@@ -1674,18 +1507,6 @@
debug_hrtimer_deactivate(timer);
/*
- * Should not happen. Per CPU timers should be
- * canceled _before_ the migration code is called
- */
- if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) {
- __remove_hrtimer(timer, old_base,
- HRTIMER_STATE_INACTIVE, 0);
- WARN(1, "hrtimer (%p %p)active but cpu %d dead\n",
- timer, timer->function, dcpu);
- continue;
- }
-
- /*
* Mark it as STATE_MIGRATE not INACTIVE otherwise the
* timer could be seen as !active and just vanish away
* under us on another CPU
@@ -1693,69 +1514,34 @@
__remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
timer->base = new_base;
/*
- * Enqueue the timer. Allow reprogramming of the event device
+ * Enqueue the timers on the new cpu, but do not reprogram
+ * the timer as that would enable a deadlock between
+ * hrtimer_enqueue_reprogramm() running the timer and us still
+ * holding a nested base lock.
+ *
+ * Instead we tickle the hrtimer interrupt after the migration
+ * is done, which will run all expired timers and re-programm
+ * the timer device.
*/
- enqueue_hrtimer(timer, new_base, 1);
+ enqueue_hrtimer(timer, new_base, 0);
-#ifdef CONFIG_HIGH_RES_TIMERS
- /*
- * Happens with high res enabled when the timer was
- * already expired and the callback mode is
- * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The
- * enqueue code does not move them to the soft irq
- * pending list for performance/latency reasons, but
- * in the migration state, we need to do that
- * otherwise we end up with a stale timer.
- */
- if (timer->state == HRTIMER_STATE_MIGRATE) {
- timer->state = HRTIMER_STATE_PENDING;
- list_add_tail(&timer->cb_entry,
- &new_base->cpu_base->cb_pending);
- raise = 1;
- }
-#endif
/* Clear the migration state bit */
timer->state &= ~HRTIMER_STATE_MIGRATE;
}
- return raise;
}
-#ifdef CONFIG_HIGH_RES_TIMERS
-static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
- struct hrtimer_cpu_base *new_base)
-{
- struct hrtimer *timer;
- int raise = 0;
-
- while (!list_empty(&old_base->cb_pending)) {
- timer = list_entry(old_base->cb_pending.next,
- struct hrtimer, cb_entry);
-
- __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0);
- timer->base = &new_base->clock_base[timer->base->index];
- list_add_tail(&timer->cb_entry, &new_base->cb_pending);
- raise = 1;
- }
- return raise;
-}
-#else
-static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
- struct hrtimer_cpu_base *new_base)
-{
- return 0;
-}
-#endif
-
-static void migrate_hrtimers(int cpu)
+static int migrate_hrtimers(int scpu)
{
struct hrtimer_cpu_base *old_base, *new_base;
- int i, raise = 0;
+ int dcpu, i;
- BUG_ON(cpu_online(cpu));
- old_base = &per_cpu(hrtimer_bases, cpu);
+ BUG_ON(cpu_online(scpu));
+ old_base = &per_cpu(hrtimer_bases, scpu);
new_base = &get_cpu_var(hrtimer_bases);
- tick_cancel_sched_timer(cpu);
+ dcpu = smp_processor_id();
+
+ tick_cancel_sched_timer(scpu);
/*
* The caller is globally serialized and nobody else
* takes two locks at once, deadlock is not possible.
@@ -1764,41 +1550,47 @@
spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
- if (migrate_hrtimer_list(&old_base->clock_base[i],
- &new_base->clock_base[i], cpu))
- raise = 1;
+ migrate_hrtimer_list(&old_base->clock_base[i],
+ &new_base->clock_base[i]);
}
- if (migrate_hrtimer_pending(old_base, new_base))
- raise = 1;
-
spin_unlock(&old_base->lock);
spin_unlock_irq(&new_base->lock);
put_cpu_var(hrtimer_bases);
- if (raise)
- hrtimer_raise_softirq();
+ return dcpu;
}
+
+static void tickle_timers(void *arg)
+{
+ hrtimer_peek_ahead_timers();
+}
+
#endif /* CONFIG_HOTPLUG_CPU */
static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
- unsigned int cpu = (long)hcpu;
+ int scpu = (long)hcpu;
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- init_hrtimers_cpu(cpu);
+ init_hrtimers_cpu(scpu);
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &cpu);
- migrate_hrtimers(cpu);
+ {
+ int dcpu;
+
+ clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
+ dcpu = migrate_hrtimers(scpu);
+ smp_call_function_single(dcpu, tickle_timers, NULL, 0);
break;
+ }
#endif
default:
@@ -1817,9 +1609,6 @@
hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
(void *)(long)smp_processor_id());
register_cpu_notifier(&hrtimers_nb);
-#ifdef CONFIG_HIGH_RES_TIMERS
- open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
-#endif
}
/**
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 5e79c66..887c637 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -116,7 +116,7 @@
* must supply functions here, even if the function just returns
* ENOSYS. The standard POSIX timer management code assumes the
* following: 1.) The k_itimer struct (sched.h) is used for the
- * timer. 2.) The list, it_lock, it_clock, it_id and it_process
+ * timer. 2.) The list, it_lock, it_clock, it_id and it_pid
* fields are not modified by timer code.
*
* At this time all functions EXCEPT clock_nanosleep can be
@@ -197,6 +197,11 @@
return 0;
}
+static int no_timer_create(struct k_itimer *new_timer)
+{
+ return -EOPNOTSUPP;
+}
+
/*
* Return nonzero if we know a priori this clockid_t value is bogus.
*/
@@ -248,6 +253,7 @@
.clock_getres = hrtimer_get_res,
.clock_get = posix_get_monotonic_raw,
.clock_set = do_posix_clock_nosettime,
+ .timer_create = no_timer_create,
};
register_posix_clock(CLOCK_REALTIME, &clock_realtime);
@@ -313,7 +319,8 @@
int posix_timer_event(struct k_itimer *timr, int si_private)
{
- int shared, ret;
+ struct task_struct *task;
+ int shared, ret = -1;
/*
* FIXME: if ->sigq is queued we can race with
* dequeue_signal()->do_schedule_next_timer().
@@ -327,8 +334,13 @@
*/
timr->sigq->info.si_sys_private = si_private;
- shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID);
- ret = send_sigqueue(timr->sigq, timr->it_process, shared);
+ rcu_read_lock();
+ task = pid_task(timr->it_pid, PIDTYPE_PID);
+ if (task) {
+ shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID);
+ ret = send_sigqueue(timr->sigq, task, shared);
+ }
+ rcu_read_unlock();
/* If we failed to send the signal the timer stops. */
return ret > 0;
}
@@ -405,7 +417,7 @@
return ret;
}
-static struct task_struct * good_sigevent(sigevent_t * event)
+static struct pid *good_sigevent(sigevent_t * event)
{
struct task_struct *rtn = current->group_leader;
@@ -419,7 +431,7 @@
((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX)))
return NULL;
- return rtn;
+ return task_pid(rtn);
}
void register_posix_clock(const clockid_t clock_id, struct k_clock *new_clock)
@@ -458,6 +470,7 @@
idr_remove(&posix_timers_id, tmr->it_id);
spin_unlock_irqrestore(&idr_lock, flags);
}
+ put_pid(tmr->it_pid);
sigqueue_free(tmr->sigq);
kmem_cache_free(posix_timers_cache, tmr);
}
@@ -471,7 +484,6 @@
{
struct k_itimer *new_timer;
int error, new_timer_id;
- struct task_struct *process;
sigevent_t event;
int it_id_set = IT_ID_NOT_SET;
@@ -525,11 +537,9 @@
goto out;
}
rcu_read_lock();
- process = good_sigevent(&event);
- if (process)
- get_task_struct(process);
+ new_timer->it_pid = get_pid(good_sigevent(&event));
rcu_read_unlock();
- if (!process) {
+ if (!new_timer->it_pid) {
error = -EINVAL;
goto out;
}
@@ -537,8 +547,7 @@
event.sigev_notify = SIGEV_SIGNAL;
event.sigev_signo = SIGALRM;
event.sigev_value.sival_int = new_timer->it_id;
- process = current->group_leader;
- get_task_struct(process);
+ new_timer->it_pid = get_pid(task_tgid(current));
}
new_timer->it_sigev_notify = event.sigev_notify;
@@ -548,7 +557,7 @@
new_timer->sigq->info.si_code = SI_TIMER;
spin_lock_irq(¤t->sighand->siglock);
- new_timer->it_process = process;
+ new_timer->it_signal = current->signal;
list_add(&new_timer->list, ¤t->signal->posix_timers);
spin_unlock_irq(¤t->sighand->siglock);
@@ -583,8 +592,7 @@
timr = idr_find(&posix_timers_id, (int)timer_id);
if (timr) {
spin_lock(&timr->it_lock);
- if (timr->it_process &&
- same_thread_group(timr->it_process, current)) {
+ if (timr->it_signal == current->signal) {
spin_unlock(&idr_lock);
return timr;
}
@@ -831,8 +839,7 @@
* This keeps any tasks waiting on the spin lock from thinking
* they got something (see the lock code above).
*/
- put_task_struct(timer->it_process);
- timer->it_process = NULL;
+ timer->it_signal = NULL;
unlock_timer(timer, flags);
release_posix_timer(timer, IT_ID_SET);
@@ -858,8 +865,7 @@
* This keeps any tasks waiting on the spin lock from thinking
* they got something (see the lock code above).
*/
- put_task_struct(timer->it_process);
- timer->it_process = NULL;
+ timer->it_signal = NULL;
unlock_timer(timer, flags);
release_posix_timer(timer, IT_ID_SET);
diff --git a/kernel/sched.c b/kernel/sched.c
index e4bb1dd..22c532a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -203,7 +203,6 @@
hrtimer_init(&rt_b->rt_period_timer,
CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rt_b->rt_period_timer.function = sched_rt_period_timer;
- rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
}
static inline int rt_bandwidth_enabled(void)
@@ -1139,7 +1138,6 @@
hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rq->hrtick_timer.function = hrtick;
- rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
}
#else /* CONFIG_SCHED_HRTICK */
static inline void hrtick_clear(struct rq *rq)
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 8178724..e8ab096 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -118,13 +118,13 @@
/*
* scd->clock = clamp(scd->tick_gtod + delta,
- * max(scd->tick_gtod, scd->clock),
- * max(scd->clock, scd->tick_gtod + TICK_NSEC));
+ * max(scd->tick_gtod, scd->clock),
+ * scd->tick_gtod + TICK_NSEC);
*/
clock = scd->tick_gtod + delta;
min_clock = wrap_max(scd->tick_gtod, scd->clock);
- max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+ max_clock = scd->tick_gtod + TICK_NSEC;
clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 8ff15e5..f5f793d 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -131,7 +131,7 @@
{
enum hrtimer_restart res = HRTIMER_NORESTART;
- write_seqlock_irq(&xtime_lock);
+ write_seqlock(&xtime_lock);
switch (time_state) {
case TIME_OK:
@@ -164,7 +164,7 @@
}
update_vsyscall(&xtime, clock);
- write_sequnlock_irq(&xtime_lock);
+ write_sequnlock(&xtime_lock);
return res;
}
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 342fc9c..8f3fc25 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -247,7 +247,7 @@
if (need_resched())
goto end;
- if (unlikely(local_softirq_pending())) {
+ if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
static int ratelimit;
if (ratelimit < 10) {
@@ -282,8 +282,31 @@
/* Schedule the tick, if we are at least one jiffie off */
if ((long)delta_jiffies >= 1) {
+ /*
+ * calculate the expiry time for the next timer wheel
+ * timer
+ */
+ expires = ktime_add_ns(last_update, tick_period.tv64 *
+ delta_jiffies);
+
+ /*
+ * If this cpu is the one which updates jiffies, then
+ * give up the assignment and let it be taken by the
+ * cpu which runs the tick timer next, which might be
+ * this cpu as well. If we don't drop this here the
+ * jiffies might be stale and do_timer() never
+ * invoked.
+ */
+ if (cpu == tick_do_timer_cpu)
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
+
if (delta_jiffies > 1)
cpu_set(cpu, nohz_cpu_mask);
+
+ /* Skip reprogram of event if its not changed */
+ if (ts->tick_stopped && ktime_equal(expires, dev->next_event))
+ goto out;
+
/*
* nohz_stop_sched_tick can be called several times before
* the nohz_restart_sched_tick is called. This happens when
@@ -306,17 +329,6 @@
rcu_enter_nohz();
}
- /*
- * If this cpu is the one which updates jiffies, then
- * give up the assignment and let it be taken by the
- * cpu which runs the tick timer next, which might be
- * this cpu as well. If we don't drop this here the
- * jiffies might be stale and do_timer() never
- * invoked.
- */
- if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = TICK_DO_TIMER_NONE;
-
ts->idle_sleeps++;
/*
@@ -332,12 +344,7 @@
goto out;
}
- /*
- * calculate the expiry time for the next timer wheel
- * timer
- */
- expires = ktime_add_ns(last_update, tick_period.tv64 *
- delta_jiffies);
+ /* Mark expiries */
ts->idle_expires = expires;
if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
@@ -681,7 +688,6 @@
*/
hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ts->sched_timer.function = tick_sched_timer;
- ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
/* Get the next period (per cpu) */
hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index 9587d3b..ae542e2 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -202,7 +202,6 @@
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = stack_trace_timer_fn;
- hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
}
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
index d83660f..8e30295 100644
--- a/lib/dynamic_printk.c
+++ b/lib/dynamic_printk.c
@@ -135,7 +135,7 @@
nr_entries--;
out:
up(&debug_list_mutex);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
@@ -289,7 +289,7 @@
dynamic_enabled = DYNAMIC_ENABLED_SOME;
err = 0;
printk(KERN_DEBUG
- "debugging enabled for module %s",
+ "debugging enabled for module %s\n",
elem->name);
} else if (!value && (elem->enable == 1)) {
elem->enable = 0;
@@ -309,7 +309,7 @@
err = 0;
printk(KERN_DEBUG
"debugging disabled for module "
- "%s", elem->name);
+ "%s\n", elem->name);
}
}
}
diff --git a/mm/migrate.c b/mm/migrate.c
index d8f0766..037b096 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -998,7 +998,7 @@
unsigned long addr = (unsigned long)(*pages);
struct vm_area_struct *vma;
struct page *page;
- int err;
+ int err = -EFAULT;
vma = find_vma(mm, addr);
if (!vma)
diff --git a/mm/slob.c b/mm/slob.c
index cb675d1..bf7e8fc 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -535,7 +535,7 @@
struct kmem_cache *c;
c = slob_alloc(sizeof(struct kmem_cache),
- flags, ARCH_KMALLOC_MINALIGN, -1);
+ GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
if (c) {
c->name = name;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index ba537fa..ce68e04 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1786,8 +1786,6 @@
if (err < 0)
return;
- __module_get(nsock->ops->owner);
-
/* Set our callbacks */
nsock->sk->sk_data_ready = rfcomm_l2data_ready;
nsock->sk->sk_state_change = rfcomm_l2state_change;
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 6c7af39..dadac62 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -133,9 +133,11 @@
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
+ set_bit(NAPI_STATE_NPSVC, &napi->state);
work = napi->poll(napi, budget);
+ clear_bit(NAPI_STATE_NPSVC, &napi->state);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index bea54a6..8d489e7 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -61,7 +61,7 @@
static struct xt_table nat_table = {
.name = "nat",
.valid_hooks = NAT_VALID_HOOKS,
- .lock = __RW_LOCK_UNLOCKED(__nat_table.lock),
+ .lock = __RW_LOCK_UNLOCKED(nat_table.lock),
.me = THIS_MODULE,
.af = AF_INET,
};
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 7cd2226..a453aac 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -40,18 +40,14 @@
#include "tcp_vegas.h"
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta = 4;
+static int gamma = 1;
module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
module_param(gamma, int, 0644);
MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
@@ -172,49 +168,13 @@
return;
}
- /* The key players are v_beg_snd_una and v_beg_snd_nxt.
- *
- * These are so named because they represent the approximate values
- * of snd_una and snd_nxt at the beginning of the current RTT. More
- * precisely, they represent the amount of data sent during the RTT.
- * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
- * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
- * bytes of data have been ACKed during the course of the RTT, giving
- * an "actual" rate of:
- *
- * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
- *
- * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
- * because delayed ACKs can cover more than one segment, so they
- * don't line up nicely with the boundaries of RTTs.
- *
- * Another unfortunate fact of life is that delayed ACKs delay the
- * advance of the left edge of our send window, so that the number
- * of bytes we send in an RTT is often less than our cwnd will allow.
- * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
- */
-
if (after(ack, vegas->beg_snd_nxt)) {
/* Do the Vegas once-per-RTT cwnd adjustment. */
- u32 old_wnd, old_snd_cwnd;
-
-
- /* Here old_wnd is essentially the window of data that was
- * sent during the previous RTT, and has all
- * been acknowledged in the course of the RTT that ended
- * with the ACK we just received. Likewise, old_snd_cwnd
- * is the cwnd during the previous RTT.
- */
- old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
- tp->mss_cache;
- old_snd_cwnd = vegas->beg_snd_cwnd;
/* Save the extent of the current window so we can use this
* at the end of the next RTT.
*/
- vegas->beg_snd_una = vegas->beg_snd_nxt;
vegas->beg_snd_nxt = tp->snd_nxt;
- vegas->beg_snd_cwnd = tp->snd_cwnd;
/* We do the Vegas calculations only if we got enough RTT
* samples that we can be reasonably sure that we got
@@ -252,22 +212,14 @@
*
* This is:
* (actual rate in segments) * baseRTT
- * We keep it as a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary point.
*/
- target_cwnd = ((u64)old_wnd * vegas->baseRTT);
- target_cwnd <<= V_PARAM_SHIFT;
- do_div(target_cwnd, rtt);
+ target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
/* Calculate the difference between the window we had,
* and the window we would like to have. This quantity
* is the "Diff" from the Arizona Vegas papers.
- *
- * Again, this is a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary
- * point.
*/
- diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
if (diff > gamma && tp->snd_ssthresh > 2 ) {
/* Going too fast. Time to slow down
@@ -282,16 +234,13 @@
* truncation robs us of full link
* utilization.
*/
- tp->snd_cwnd = min(tp->snd_cwnd,
- ((u32)target_cwnd >>
- V_PARAM_SHIFT)+1);
+ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
- u32 next_snd_cwnd;
/* Figure out where we would like cwnd
* to be.
@@ -300,26 +249,17 @@
/* The old window was too fast, so
* we slow down.
*/
- next_snd_cwnd = old_snd_cwnd - 1;
+ tp->snd_cwnd--;
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
*/
- next_snd_cwnd = old_snd_cwnd + 1;
+ tp->snd_cwnd++;
} else {
/* Sending just as fast as we
* should be.
*/
- next_snd_cwnd = old_snd_cwnd;
}
-
- /* Adjust cwnd upward or downward, toward the
- * desired value.
- */
- if (next_snd_cwnd > tp->snd_cwnd)
- tp->snd_cwnd++;
- else if (next_snd_cwnd < tp->snd_cwnd)
- tp->snd_cwnd--;
}
if (tp->snd_cwnd < 2)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 1724383..d0f54d1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -912,8 +912,13 @@
is invalid, but ndisc specs say nothing
about it. It could be misconfiguration, or
an smart proxy agent tries to help us :-)
+
+ We should not print the error if NA has been
+ received from loopback - it is just our own
+ unsolicited advertisement.
*/
- ND_PRINTK1(KERN_WARNING
+ if (skb->pkt_type != PACKET_LOOPBACK)
+ ND_PRINTK1(KERN_WARNING
"ICMPv6 NA: someone advertises our address on %s!\n",
ifp->idev->dev->name);
in6_ifa_put(ifp);
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 90c8506..8c03080 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -562,7 +562,6 @@
const struct in_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af4list *list_entry;
struct netlbl_unlhsh_addr4 *entry;
struct audit_buffer *audit_buf;
@@ -577,7 +576,7 @@
if (list_entry != NULL)
entry = netlbl_unlhsh_addr4_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
@@ -588,19 +587,21 @@
addr->s_addr, mask->s_addr);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+ return 0;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -624,7 +625,6 @@
const struct in6_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af6list *list_entry;
struct netlbl_unlhsh_addr6 *entry;
struct audit_buffer *audit_buf;
@@ -638,7 +638,7 @@
if (list_entry != NULL)
entry = netlbl_unlhsh_addr6_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
@@ -649,19 +649,21 @@
addr, mask);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+ return 0;
}
#endif /* IPv6 */
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 9978afb..803eeef 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -155,12 +155,13 @@
static void gprs_write_space(struct sock *sk)
{
struct gprs_dev *dev = sk->sk_user_data;
+ struct net_device *net = dev->net;
unsigned credits = pep_writeable(sk);
spin_lock_bh(&dev->tx_lock);
dev->tx_max = credits;
- if (credits > skb_queue_len(&dev->tx_queue))
- netif_wake_queue(dev->net);
+ if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+ netif_wake_queue(net);
spin_unlock_bh(&dev->tx_lock);
}
@@ -168,6 +169,23 @@
* Network device callbacks
*/
+static int gprs_open(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ gprs_write_space(gp->sk);
+ return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ flush_work(&gp->tx_work);
+ return 0;
+}
+
static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
{
struct gprs_dev *dev = netdev_priv(net);
@@ -254,6 +272,8 @@
net->tx_queue_len = 10;
net->destructor = free_netdev;
+ net->open = gprs_open;
+ net->stop = gprs_close;
net->hard_start_xmit = gprs_xmit; /* mandatory */
net->change_mtu = gprs_set_mtu;
net->get_stats = gprs_get_stats;
@@ -318,7 +338,6 @@
dev->sk = sk;
printk(KERN_DEBUG"%s: attached\n", net->name);
- gprs_write_space(sk); /* kick off TX */
return net->ifindex;
out_rel:
@@ -341,7 +360,5 @@
printk(KERN_DEBUG"%s: detached\n", net->name);
unregister_netdev(net);
- flush_scheduled_work();
sock_put(sk);
- skb_queue_purge(&dev->tx_queue);
}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a119599..98402f0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -46,9 +46,6 @@
layering other disciplines. It does not need to do bandwidth
control either since that can be handled by using token
bucket or other rate control.
-
- The simulator is limited by the Linux timer resolution
- and will create packet bursts on the HZ boundary (1ms).
*/
struct netem_sched_data {
diff --git a/net/socket.c b/net/socket.c
index 92764d8..76ba80a 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2307,6 +2307,7 @@
}
(*newsock)->ops = sock->ops;
+ __module_get((*newsock)->ops->owner);
done:
return err;
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index 1899cf0..8e52b2a 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -96,7 +96,6 @@
return -EINVAL;
hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- pcsp_chip.timer.cb_mode = HRTIMER_CB_SOFTIRQ;
pcsp_chip.timer.function = pcsp_do_timer;
card = snd_card_new(index, id, THIS_MODULE, 0);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5dd3e89..b77f330 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -69,6 +69,7 @@
};
enum {
+ STAC_92HD73XX_NO_JD, /* no jack-detection */
STAC_92HD73XX_REF,
STAC_DELL_M6_AMIC,
STAC_DELL_M6_DMIC,
@@ -127,6 +128,7 @@
};
enum {
+ STAC_D965_REF_NO_JD, /* no jack-detection */
STAC_D965_REF,
STAC_D965_3ST,
STAC_D965_5ST,
@@ -857,6 +859,7 @@
/* power state controls amps */
{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
+ {}
};
static struct hda_verb stac92hd71bxx_core_init[] = {
@@ -868,6 +871,7 @@
{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {}
};
#define HD_DISABLE_PORTF 2
@@ -1611,6 +1615,7 @@
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
+ [STAC_92HD73XX_NO_JD] = "no-jd",
[STAC_92HD73XX_REF] = "ref",
[STAC_DELL_M6_AMIC] = "dell-m6-amic",
[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
@@ -1640,6 +1645,8 @@
"unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
"Dell Studio 1537", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
+ "Dell Studio 17", STAC_DELL_M6_DMIC),
{} /* terminator */
};
@@ -1662,6 +1669,7 @@
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD71BXX_REF),
+ {} /* terminator */
};
static unsigned int ref92hd71bxx_pin_configs[11] = {
@@ -2027,6 +2035,7 @@
};
static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
+ [STAC_D965_REF_NO_JD] = ref927x_pin_configs,
[STAC_D965_REF] = ref927x_pin_configs,
[STAC_D965_3ST] = d965_3st_pin_configs,
[STAC_D965_5ST] = d965_5st_pin_configs,
@@ -2035,6 +2044,7 @@
};
static const char *stac927x_models[STAC_927X_MODELS] = {
+ [STAC_D965_REF_NO_JD] = "ref-no-jd",
[STAC_D965_REF] = "ref",
[STAC_D965_3ST] = "3stack",
[STAC_D965_5ST] = "5stack",
@@ -2896,7 +2906,7 @@
}
if ((spec->multiout.num_dacs - cfg->line_outs) > 0 &&
- cfg->hp_outs && !spec->multiout.hp_nid)
+ cfg->hp_outs == 1 && !spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
@@ -4254,14 +4264,17 @@
switch (spec->multiout.num_dacs) {
case 0x3: /* 6 Channel */
+ spec->multiout.hp_nid = 0x17;
spec->mixer = stac92hd73xx_6ch_mixer;
spec->init = stac92hd73xx_6ch_core_init;
break;
case 0x4: /* 8 Channel */
+ spec->multiout.hp_nid = 0x18;
spec->mixer = stac92hd73xx_8ch_mixer;
spec->init = stac92hd73xx_8ch_core_init;
break;
case 0x5: /* 10 Channel */
+ spec->multiout.hp_nid = 0x19;
spec->mixer = stac92hd73xx_10ch_mixer;
spec->init = stac92hd73xx_10ch_core_init;
};
@@ -4297,6 +4310,7 @@
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
spec->eapd_switch = 0;
spec->num_amps = 1;
+ spec->multiout.hp_nid = 0; /* dual HPs */
if (!spec->init)
spec->init = dell_m6_core_init;
@@ -4351,6 +4365,9 @@
return err;
}
+ if (spec->board_config == STAC_92HD73XX_NO_JD)
+ spec->hp_detect = 0;
+
codec->patch_ops = stac92xx_patch_ops;
return 0;
@@ -4899,6 +4916,10 @@
*/
codec->bus->needs_damn_long_delay = 1;
+ /* no jack detecion for ref-no-jd model */
+ if (spec->board_config == STAC_D965_REF_NO_JD)
+ spec->hp_detect = 0;
+
return 0;
}
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e9084fd..acd68ef 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -233,7 +233,7 @@
if (ret < 0)
goto out;
- prtd = kzalloc(sizeof(prtd), GFP_KERNEL);
+ prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
if (prtd == NULL) {
ret = -ENOMEM;
goto out;