USB: usbtmc: Use usb_clear_halt() instead of custom code.
Make the USB Test & Measurement driver use usb_clear_halt() instead of
usb_control_msg() to clear a stalled endpoint. This will allow devices to
be tested under an xHCI host controller. The endpoint stall will not be
cleared in the internal xHCI hardware state unless usb_clear_halt() is
used.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Steve Holland <sdh4@iastate.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Jouni Ryno <Jouni.Ryno@fmi.fi>
Cc: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 619cc99..7c5f4e3 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -347,13 +347,8 @@
goto exit;
usbtmc_abort_bulk_out_clear_halt:
- rv = usb_control_msg(data->usb_dev,
- usb_sndctrlpipe(data->usb_dev, 0),
- USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_STANDARD |
- USB_RECIP_ENDPOINT,
- USB_ENDPOINT_HALT, data->bulk_out, buffer,
- 0, USBTMC_TIMEOUT);
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
@@ -708,14 +703,8 @@
usbtmc_clear_bulk_out_halt:
- rv = usb_control_msg(data->usb_dev,
- usb_sndctrlpipe(data->usb_dev, 0),
- USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_STANDARD |
- USB_RECIP_ENDPOINT,
- USB_ENDPOINT_HALT,
- data->bulk_out, buffer, 0,
- USBTMC_TIMEOUT);
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
goto exit;
@@ -736,13 +725,8 @@
if (!buffer)
return -ENOMEM;
- rv = usb_control_msg(data->usb_dev,
- usb_sndctrlpipe(data->usb_dev, 0),
- USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_STANDARD |
- USB_RECIP_ENDPOINT,
- USB_ENDPOINT_HALT, data->bulk_out,
- buffer, 0, USBTMC_TIMEOUT);
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
if (rv < 0) {
dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n",
@@ -765,12 +749,8 @@
if (!buffer)
return -ENOMEM;
- rv = usb_control_msg(data->usb_dev, usb_sndctrlpipe(data->usb_dev, 0),
- USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_STANDARD |
- USB_RECIP_ENDPOINT,
- USB_ENDPOINT_HALT, data->bulk_in, buffer, 0,
- USBTMC_TIMEOUT);
+ rv = usb_clear_halt(data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev, data->bulk_in));
if (rv < 0) {
dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n",