| The following is a list of files and features that are going to be |
| removed in the kernel source tree. Every entry should contain what |
| exactly is going away, why it is happening, and who is going to be doing |
| the work. When the feature is removed from the kernel, it should also |
| be removed from this file. |
| |
| --------------------------- |
| |
| What: /sys/devices/.../power/state |
| dev->power.power_state |
| dpm_runtime_{suspend,resume)() |
| When: July 2007 |
| Why: Broken design for runtime control over driver power states, confusing |
| driver-internal runtime power management with: mechanisms to support |
| system-wide sleep state transitions; event codes that distinguish |
| different phases of swsusp "sleep" transitions; and userspace policy |
| inputs. This framework was never widely used, and most attempts to |
| use it were broken. Drivers should instead be exposing domain-specific |
| interfaces either to kernel or to userspace. |
| Who: Pavel Machek <pavel@suse.cz> |
| |
| --------------------------- |
| |
| What: RAW driver (CONFIG_RAW_DRIVER) |
| When: December 2005 |
| Why: declared obsolete since kernel 2.6.3 |
| O_DIRECT can be used instead |
| Who: Adrian Bunk <bunk@stusta.de> |
| |
| --------------------------- |
| |
| What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN |
| When: June 2007 |
| Why: Deprecated in favour of the more efficient and robust rawiso interface. |
| Affected are applications which use the deprecated part of libraw1394 |
| (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv, |
| raw1394_stop_iso_rcv) or bypass libraw1394. |
| Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de> |
| |
| --------------------------- |
| |
| What: dv1394 driver (CONFIG_IEEE1394_DV1394) |
| When: June 2007 |
| Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This |
| shift of application support has been indicated on www.linux1394.org |
| and developers' mailinglists for quite some time. Major applications |
| have been converted, with the exception of ffmpeg and hence xine. |
| Piped output of dvgrab2 is a partial equivalent to dv1394. |
| Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de> |
| |
| --------------------------- |
| |
| What: ieee1394 core's unused exports (CONFIG_IEEE1394_EXPORT_FULL_API) |
| When: January 2007 |
| Why: There are no projects known to use these exported symbols, except |
| dfg1394 (uses one symbol whose functionality is core-internal now). |
| Who: Stefan Richter <stefanr@s5r6.in-berlin.de> |
| |
| --------------------------- |
| |
| What: ieee1394's *_oui sysfs attributes (CONFIG_IEEE1394_OUI_DB) |
| When: January 2007 |
| Files: drivers/ieee1394/: oui.db, oui2c.sh |
| Why: big size, little value |
| Who: Stefan Richter <stefanr@s5r6.in-berlin.de> |
| |
| --------------------------- |
| |
| What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. |
| When: December 2006 |
| Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6 |
| series. The old API have lots of drawbacks and don't provide enough |
| means to work with all video and audio standards. The newer API is |
| already available on the main drivers and should be used instead. |
| Newer drivers should use v4l_compat_translate_ioctl function to handle |
| old calls, replacing to newer ones. |
| Decoder iocts are using internally to allow video drivers to |
| communicate with video decoders. This should also be improved to allow |
| V4L2 calls being translated into compatible internal ioctls. |
| Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br> |
| |
| --------------------------- |
| |
| What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) |
| When: November 2005 |
| Files: drivers/pcmcia/: pcmcia_ioctl.c |
| Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a |
| normal hotpluggable bus, and with it using the default kernel |
| infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA |
| control ioctl needed by cardmgr and cardctl from pcmcia-cs is |
| unnecessary, and makes further cleanups and integration of the |
| PCMCIA subsystem into the Linux kernel device driver model more |
| difficult. The features provided by cardmgr and cardctl are either |
| handled by the kernel itself now or are available in the new |
| pcmciautils package available at |
| http://kernel.org/pub/linux/utils/kernel/pcmcia/ |
| Who: Dominik Brodowski <linux@brodo.de> |
| |
| --------------------------- |
| |
| What: remove EXPORT_SYMBOL(kernel_thread) |
| When: August 2006 |
| Files: arch/*/kernel/*_ksyms.c |
| Why: kernel_thread is a low-level implementation detail. Drivers should |
| use the <linux/kthread.h> API instead which shields them from |
| implementation details and provides a higherlevel interface that |
| prevents bugs and code duplication |
| Who: Christoph Hellwig <hch@lst.de> |
| |
| --------------------------- |
| |
| What: CONFIG_FORCED_INLINING |
| When: June 2006 |
| Why: Config option is there to see if gcc is good enough. (in january |
| 2006). If it is, the behavior should just be the default. If it's not, |
| the option should just go away entirely. |
| Who: Arjan van de Ven |
| |
| --------------------------- |
| |
| What: eepro100 network driver |
| When: January 2007 |
| Why: replaced by the e100 driver |
| Who: Adrian Bunk <bunk@stusta.de> |
| |
| --------------------------- |
| |
| What: drivers depending on OSS_OBSOLETE_DRIVER |
| When: options in 2.6.20, code in 2.6.22 |
| Why: OSS drivers with ALSA replacements |
| Who: Adrian Bunk <bunk@stusta.de> |
| |
| --------------------------- |
| |
| What: pci_module_init(driver) |
| When: January 2007 |
| Why: Is replaced by pci_register_driver(pci_driver). |
| Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de> |
| |
| --------------------------- |
| |
| What: Usage of invalid timevals in setitimer |
| When: March 2007 |
| Why: POSIX requires to validate timevals in the setitimer call. This |
| was never done by Linux. The invalid (e.g. negative timevals) were |
| silently converted to more or less random timeouts and intervals. |
| Until the removal a per boot limited number of warnings is printed |
| and the timevals are sanitized. |
| |
| Who: Thomas Gleixner <tglx@linutronix.de> |
| |
| --------------------------- |
| |
| What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports |
| (temporary transition config option provided until then) |
| The transition config option will also be removed at the same time. |
| When: before 2.6.19 |
| Why: Unused symbols are both increasing the size of the kernel binary |
| and are often a sign of "wrong API" |
| Who: Arjan van de Ven <arjan@linux.intel.com> |
| |
| --------------------------- |
| |
| What: mount/umount uevents |
| When: February 2007 |
| Why: These events are not correct, and do not properly let userspace know |
| when a file system has been mounted or unmounted. Userspace should |
| poll the /proc/mounts file instead to detect this properly. |
| Who: Greg Kroah-Hartman <gregkh@suse.de> |
| |
| --------------------------- |
| |
| What: USB driver API moves to EXPORT_SYMBOL_GPL |
| When: February 2008 |
| Files: include/linux/usb.h, drivers/usb/core/driver.c |
| Why: The USB subsystem has changed a lot over time, and it has been |
| possible to create userspace USB drivers using usbfs/libusb/gadgetfs |
| that operate as fast as the USB bus allows. Because of this, the USB |
| subsystem will not be allowing closed source kernel drivers to |
| register with it, after this grace period is over. If anyone needs |
| any help in converting their closed source drivers over to use the |
| userspace filesystems, please contact the |
| linux-usb-devel@lists.sourceforge.net mailing list, and the developers |
| there will be glad to help you out. |
| Who: Greg Kroah-Hartman <gregkh@suse.de> |
| |
| --------------------------- |
| |
| What: find_trylock_page |
| When: January 2007 |
| Why: The interface no longer has any callers left in the kernel. It |
| is an odd interface (compared with other find_*_page functions), in |
| that it does not take a refcount to the page, only the page lock. |
| It should be replaced with find_get_page or find_lock_page if possible. |
| This feature removal can be reevaluated if users of the interface |
| cannot cleanly use something else. |
| Who: Nick Piggin <npiggin@suse.de> |
| |
| --------------------------- |
| |
| What: Interrupt only SA_* flags |
| When: Januar 2007 |
| Why: The interrupt related SA_* flags are replaced by IRQF_* to move them |
| out of the signal namespace. |
| |
| Who: Thomas Gleixner <tglx@linutronix.de> |
| |
| --------------------------- |
| |
| What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment |
| When: October 2008 |
| Why: The stacking of class devices makes these values misleading and |
| inconsistent. |
| Class devices should not carry any of these properties, and bus |
| devices have SUBSYTEM and DRIVER as a replacement. |
| Who: Kay Sievers <kay.sievers@suse.de> |
| |
| --------------------------- |
| |
| What: i2c-isa |
| When: December 2006 |
| Why: i2c-isa is a non-sense and doesn't fit in the device driver |
| model. Drivers relying on it are better implemented as platform |
| drivers. |
| Who: Jean Delvare <khali@linux-fr.org> |
| |
| --------------------------- |
| |
| What: i2c_adapter.dev |
| i2c_adapter.list |
| When: July 2007 |
| Why: Superfluous, given i2c_adapter.class_dev: |
| * The "dev" was a stand-in for the physical device node that legacy |
| drivers would not have; but now it's almost always present. Any |
| remaining legacy drivers must upgrade (they now trigger warnings). |
| * The "list" duplicates class device children. |
| The delay in removing this is so upgraded lm_sensors and libsensors |
| can get deployed. (Removal causes minor changes in the sysfs layout, |
| notably the location of the adapter type name and parenting the i2c |
| client hardware directly from their controller.) |
| Who: Jean Delvare <khali@linux-fr.org>, |
| David Brownell <dbrownell@users.sourceforge.net> |
| |
| --------------------------- |
| |
| What: IPv4 only connection tracking/NAT/helpers |
| When: 2.6.22 |
| Why: The new layer 3 independant connection tracking replaces the old |
| IPv4 only version. After some stabilization of the new code the |
| old one will be removed. |
| Who: Patrick McHardy <kaber@trash.net> |
| |
| --------------------------- |
| |
| What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver |
| When: December 2006 |
| Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are |
| functionally very much similar. They talk to ACPI in same way. Only |
| difference between them is the way they do frequency transitions. |
| One uses MSRs and the other one uses IO ports. Functionaliy of |
| speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq. |
| That means one common driver will support all Intel Enhanced Speedstep |
| capable CPUs. That means less confusion over name of |
| speedstep-centrino driver (with that driver supposed to be used on |
| non-centrino platforms). That means less duplication of code and |
| less maintenance effort and no possibility of these two drivers |
| going out of sync. |
| Current users of speedstep_centrino with ACPI hooks are requested to |
| switch over to acpi-cpufreq driver. speedstep-centrino will continue |
| to work using older non-ACPI static table based scheme even after this |
| date. |
| |
| Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> |
| |
| --------------------------- |
| |
| What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY) |
| When: 2.6.21 |
| Why: hotkey.c was an attempt to consolidate multiple drivers that use |
| ACPI to implement hotkeys. However, hotkeys are not documented |
| in the ACPI specification, so the drivers used undocumented |
| vendor-specific hooks and turned out to be more different than |
| the same. |
| |
| Further, the keys and the features supplied by each platform |
| are different, so there will always be a need for |
| platform-specific drivers. |
| |
| So the new plan is to delete hotkey.c and instead, work on the |
| platform specific drivers to try to make them look the same |
| to the user when they supply the same features. |
| |
| hotkey.c has always depended on CONFIG_EXPERIMENTAL |
| |
| Who: Len Brown <len.brown@intel.com> |
| |
| --------------------------- |
| |
| What: /sys/firmware/acpi/namespace |
| When: 2.6.21 |
| Why: The ACPI namespace is effectively the symbol list for |
| the BIOS. The device names are completely arbitrary |
| and have no place being exposed to user-space. |
| |
| For those interested in the BIOS ACPI namespace, |
| the BIOS can be extracted and disassembled with acpidump |
| and iasl as documented in the pmtools package here: |
| http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils |
| |
| Who: Len Brown <len.brown@intel.com> |
| |
| --------------------------- |
| |
| What: /proc/acpi/button |
| When: August 2007 |
| Why: /proc/acpi/button has been replaced by events to the input layer |
| since 2.6.20. |
| Who: Len Brown <len.brown@intel.com> |
| |
| --------------------------- |