arch/arm/boot/dts/msmcopper.dtsi - kernel/msm - Gitiles

 /* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 /include/ "skeleton.dtsi"
 /include/ "msmcopper_pm.dtsi"
 /include/ "msm-pm8841.dtsi"
 /include/ "msm-pm8941.dtsi"
 /include/ "msmcopper-regulator.dtsi"
 /include/ "msmcopper-gpio.dtsi"

 / {
 	model = "Qualcomm MSM Copper";
 	compatible = "qcom,msmcopper";
 	interrupt-parent = <&intc>;

 	intc: interrupt-controller@F9000000 {
 		compatible = "qcom,msm-qgic2";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0xF9000000 0x1000>,
 		      <0xF9002000 0x1000>;
 	};

 	msmgpio: gpio@fd510000 {
 		compatible = "qcom,msm-gpio";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		reg = <0xfd510000 0x4000>;
 		#gpio-cells = <2>;
 	};

 	timer {
 		compatible = "qcom,msm-qtimer", "arm,armv7-timer";
 		interrupts = <1 2 0 1 3 0>;
 		clock-frequency = <19200000>;
 	};

 	qcom,vidc@fdc00000 {
 		compatible = "qcom,msm-vidc";
 		reg = <0xfdc00000 0xff000>;
 		interrupts = <0 44 0>;
 	};

 	serial@f991f000 {
 		compatible = "qcom,msm-lsuart-v14";
 		reg = <0xf991f000 0x1000>;
 		interrupts = <0 109 0>;
 	};

 	serial@f995e000 {
 		compatible = "qcom,msm-lsuart-v14";
 		reg = <0xf995e000 0x1000>;
 		interrupts = <0 114 0>;
 	};

 	usb@f9a55000 {
 		compatible = "qcom,hsusb-otg";
 		reg = <0xf9a55000 0x400>;
 		interrupts = <0 134 0>;
 		HSUSB_VDDCX-supply = <&pm8841_s2>;
 		HSUSB_1p8-supply = <&pm8941_l6>;
 		HSUSB_3p3-supply = <&pm8941_l24>;

 		qcom,hsusb-otg-phy-type = <2>;
 		qcom,hsusb-otg-mode = <1>;
 		qcom,hsusb-otg-otg-control = <1>;
 	};

 	qcom,sdcc@f9824000 {
 		cell-index = <1>;
 		compatible = "qcom,msm-sdcc";
 		reg = <0xf9824000 0x1000>;
 		interrupts = <0 123 0>;

 		qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>;
 		qcom,sdcc-sup-voltages = <2950 2950>;
 		qcom,sdcc-bus-width = <8>;
 		qcom,sdcc-hs200;
 		qcom,sdcc-nonremovable;
 	};

 	qcom,sdcc@f98a4000 {
 		cell-index = <2>;
 		compatible = "qcom,msm-sdcc";
 		reg = <0xf98a4000 0x1000>;
 		interrupts = <0 125 0>;

 		qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>;
 		qcom,sdcc-sup-voltages = <2950 2950>;
 		qcom,sdcc-bus-width = <4>;
 	};

 	qcom,sdcc@f9864000 {
 		cell-index = <3>;
 		compatible = "qcom,msm-sdcc";
 		reg = <0xf9864000 0x1000>;
 		interrupts = <0 127 0>;

 		qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>;
 		qcom,sdcc-sup-voltages = <1800 1800>;
 		qcom,sdcc-bus-width = <4>;
 	};

 	qcom,sdcc@f98e4000 {
 		cell-index = <4>;
 		compatible = "qcom,msm-sdcc";
 		reg = <0xf98e4000 0x1000>;
 		interrupts = <0 129 0>;

 		qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>;
 		qcom,sdcc-sup-voltages = <1800 1800>;
 		qcom,sdcc-bus-width = <4>;
 	};

 	qcom,sps@f9980000 {
 		compatible = "qcom,msm_sps";
 		reg = <0xf9984000 0x15000>,
 		      <0xf9999000 0xb000>;
 		interrupts = <0 94 0>;

 		qcom,bam-dma-res-pipes = <6>;
 	};

 	spi@f9924000 {
 		compatible = "qcom,spi-qup-v2";
 		reg = <0xf9924000 0x1000>;
 		interrupts = <0 96 0>;
 		spi-max-frequency = <24000000>;
 	};

 	slim@fe12f000 {
 		cell-index = <1>;
 		compatible = "qcom,slim-msm";
 		reg = <0xfe12f000 0x35000>,
 		      <0xfe104000 0x20000>;
 		reg-names = "slimbus_physical", "slimbus_bam_physical";
 		interrupts = <0 163 0 0 164 0>;
 		interrupt-names = "slimbus_irq", "slimbus_bam_irq";
 		qcom,min-clk-gear = <10>;
 	};

 	qcom,spmi@fc4c0000 {
 		cell-index = <0>;
 		compatible = "qcom,spmi-pmic-arb";
 		reg = <0xfc4cf000 0x1000>,
 		      <0Xfc4cb000 0x1000>;
 		/* 190,ee0_krait_hlos_spmi_periph_irq */
 		/* 187,channel_0_krait_hlos_trans_done_irq */
 		interrupts = <0 190 0 0 187 0>;
 		qcom,pmic-arb-ee = <0>;
 		qcom,pmic-arb-channel = <0>;
 		qcom,pmic-arb-ppid-map = <0x13000000>, /* PM8941_LDO1 */
 					 <0x13100001>, /* PM8941_LDO2 */
 					 <0x13200002>, /* PM8941_LDO3 */
 					 <0x13300003>, /* PM8941_LDO4 */
 					 <0x13400004>, /* PM8941_LDO5 */
 					 <0x13500005>, /* PM8941_LDO6 */
 					 <0x13600006>, /* PM8941_LDO7 */
 					 <0x13700007>, /* PM8941_LDO8 */
 					 <0x13800008>, /* PM8941_LDO9 */
 					 <0x13900009>, /* PM8941_LDO10 */
 					 <0x13a0000a>, /* PM8941_LDO11 */
 					 <0x13b0000b>, /* PM8941_LDO12 */
 					 <0x13c0000c>, /* PM8941_LDO13 */
 					 <0x13d0000d>, /* PM8941_LDO14 */
 					 <0x13e0000e>, /* PM8941_LDO15 */
 					 <0x13f0000f>, /* PM8941_LDO16 */
 					 <0x14000010>, /* PM8941_LDO17 */
 					 <0x14100011>, /* PM8941_LDO18 */
 					 <0x14200012>, /* PM8941_LDO19 */
 					 <0x14300013>, /* PM8941_LDO20 */
 					 <0x14400014>, /* PM8941_LDO21 */
 					 <0x14500015>, /* PM8941_LDO22 */
 					 <0x14600016>, /* PM8941_LDO23 */
 					 <0x14700017>, /* PM8941_LDO24 */
 					 <0x14800018>, /* PM8941_LDO25 */
 					 <0x14900019>, /* PM8941_LDO26 */
 					 <0x0c00001a>, /* PM8941_GPIO1 */
 					 <0x0c10001b>, /* PM8941_GPIO2 */
 					 <0x0c20001c>, /* PM8941_GPIO3 */
 					 <0x0c30001d>, /* PM8941_GPIO4 */
 					 <0x0c40001e>, /* PM8941_GPIO5 */
 					 <0x0c50001f>, /* PM8941_GPIO6 */
 					 <0x0c600020>, /* PM8941_GPIO7 */
 					 <0x0c700021>, /* PM8941_GPIO8 */
 					 <0x0c800022>, /* PM8941_GPIO9 */
 					 <0x0c900023>, /* PM8941_GPIO10 */
 					 <0x0ca00024>, /* PM8941_GPIO11 */
 					 <0x0cb00025>, /* PM8941_GPIO12 */
 					 <0x0cc00026>, /* PM8941_GPIO13 */
 					 <0x0cd00027>, /* PM8941_GPIO14 */
 					 <0x0ce00028>, /* PM8941_GPIO15 */
 					 <0x0cf00029>, /* PM8941_GPIO16 */
 					 <0x0d00002a>, /* PM8941_GPIO17 */
 					 <0x0d10002b>, /* PM8941_GPIO18 */
 					 <0x0d20002c>, /* PM8941_GPIO19 */
 					 <0x0d30002d>, /* PM8941_GPIO20 */
 					 <0x0d40002e>, /* PM8941_GPIO21 */
 					 <0x0d50002f>, /* PM8941_GPIO22 */
 					 <0x0d600030>, /* PM8941_GPIO23 */
 					 <0x0d700031>, /* PM8941_GPIO24 */
 					 <0x0d800032>, /* PM8941_GPIO25 */
 					 <0x0d900033>, /* PM8941_GPIO26 */
 					 <0x0da00034>, /* PM8941_GPIO27 */
 					 <0x0db00035>, /* PM8941_GPIO28 */
 					 <0x0dc00036>, /* PM8941_GPIO29 */
 					 <0x0dd00037>, /* PM8941_GPIO30 */
 					 <0x0de00038>, /* PM8941_GPIO31 */
 					 <0x0df00039>, /* PM8941_GPIO32 */
 					 <0x0e00003a>, /* PM8941_GPIO33 */
 					 <0x0e10003b>, /* PM8941_GPIO34 */
 					 <0x0e20003c>, /* PM8941_GPIO35 */
 					 <0x0e30003d>, /* PM8941_GPIO36 */
 					 <0x0280003e>, /* COINCELL */
 					 <0x0100003f>, /* SMBC_OVP */
 					 <0x01100040>, /* SMBC_CHG */
 					 <0x01200041>, /* SMBC_BIF */
 					 <0x00500042>, /* INTERRUPT */
 					 <0x00100043>, /* PM8941_0 */
 					 <0x20100044>, /* PM8841_0 */
 					 <0x10100045>, /* PM8941_1 */
 					 <0x30100046>, /* PM8841_1 */
 					 <0x00800047>, /* PON0 */
 					 <0x20800048>, /* PON1 */
 					 <0x11000049>, /* PM8941_SMPS1 */
 					 <0x1110004a>, /* PM8941_SMPS2 */
 					 <0x1120004b>, /* PM8941_SMPS3 */
 					 <0x3100004c>, /* PM8841_SMPS1 */
 					 <0x3110004d>, /* PM8841_SMPS2 */
 					 <0x3120004e>, /* PM8841_SMPS3 */
 					 <0x3130004f>, /* PM8841_SMPS4 */
 					 <0x31400050>, /* PM8841_SMPS5 */
 					 <0x31500051>, /* PM8841_SMPS6 */
 					 <0x31600052>, /* PM8841_SMPS7 */
 					 <0x31700053>, /* PM8841_SMPS8 */
 					 <0x05000054>, /* SHARED_XO */
 					 <0x05100055>, /* BB_CLK1 */
 					 <0x05200056>, /* BB_CLK2 */
 					 <0x05900057>, /* SLEEP_CLK */
 					 <0x07000058>, /* PBS_CORE */
 					 <0x07100059>, /* PBS_CLIENT1 */
 					 <0x0720005a>; /* PBS_CLIENT2 */
 	};

 	i2c@f9966000 {
 		cell-index = <0>;
 		compatible = "qcom,i2c-qup";
 		reg = <0Xf9966000 0x1000>;
 		reg-names = "qup_phys_addr";
 		interrupts = <0 104 0>;
 		interrupt-names = "qup_err_intr";
 		qcom,i2c-bus-freq = <100000>;
 		qcom,i2c-src-freq = <24000000>;
 	};

 	qcom,acpuclk@f9000000 {
 		compatible = "qcom,acpuclk-copper";
 	};

 	qcom,ssusb@F9200000 {
 		compatible = "qcom,dwc-usb3-msm";
 		reg = <0xF9200000 0xCCFF>;
 		interrupts = <0 131 0>;
 		qcom,dwc-usb3-msm-dbm-eps = <4>;
 	};

 	qcom,lpass@fe200000 {
 		compatible = "qcom,pil-q6v5-lpass";
 		reg = <0xfe200000 0x00100>,
 		      <0xfd485100 0x00010>;

 		qcom,firmware-name = "lpass";
 	};

 	qcom,pronto@fb21b000 {
 		compatible = "qcom,pil-pronto";
 		reg = <0xfb21b000 0x3000>,
 		      <0xfc401700 0x4>,
 		      <0xfd485300 0xc>;
 		vdd_pronto_pll-supply = <&pm8941_l12>;

 		qcom,firmware-name = "wcnss";
 	};

 	qcom,ocmem@fdd00000 {
 		compatible = "qcom,msm_ocmem";
 	};
 };
	/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	/include/ "skeleton.dtsi"
	/include/ "msmcopper_pm.dtsi"
	/include/ "msm-pm8841.dtsi"
	/include/ "msm-pm8941.dtsi"
	/include/ "msmcopper-regulator.dtsi"
	/include/ "msmcopper-gpio.dtsi"

	/ {
	model = "Qualcomm MSM Copper";
	compatible = "qcom,msmcopper";
	interrupt-parent = <&intc>;

	intc: interrupt-controller@F9000000 {
	compatible = "qcom,msm-qgic2";
	interrupt-controller;
	#interrupt-cells = <3>;
	reg = <0xF9000000 0x1000>,
	<0xF9002000 0x1000>;
	};

	msmgpio: gpio@fd510000 {
	compatible = "qcom,msm-gpio";
	interrupt-controller;
	#interrupt-cells = <2>;
	reg = <0xfd510000 0x4000>;
	#gpio-cells = <2>;
	};

	timer {
	compatible = "qcom,msm-qtimer", "arm,armv7-timer";
	interrupts = <1 2 0 1 3 0>;
	clock-frequency = <19200000>;
	};

	qcom,vidc@fdc00000 {
	compatible = "qcom,msm-vidc";
	reg = <0xfdc00000 0xff000>;
	interrupts = <0 44 0>;
	};

	serial@f991f000 {
	compatible = "qcom,msm-lsuart-v14";
	reg = <0xf991f000 0x1000>;
	interrupts = <0 109 0>;
	};

	serial@f995e000 {
	compatible = "qcom,msm-lsuart-v14";
	reg = <0xf995e000 0x1000>;
	interrupts = <0 114 0>;
	};

	usb@f9a55000 {
	compatible = "qcom,hsusb-otg";
	reg = <0xf9a55000 0x400>;
	interrupts = <0 134 0>;
	HSUSB_VDDCX-supply = <&pm8841_s2>;
	HSUSB_1p8-supply = <&pm8941_l6>;
	HSUSB_3p3-supply = <&pm8941_l24>;

	qcom,hsusb-otg-phy-type = <2>;
	qcom,hsusb-otg-mode = <1>;
	qcom,hsusb-otg-otg-control = <1>;
	};

	qcom,sdcc@f9824000 {
	cell-index = <1>;
	compatible = "qcom,msm-sdcc";
	reg = <0xf9824000 0x1000>;
	interrupts = <0 123 0>;

	qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>;
	qcom,sdcc-sup-voltages = <2950 2950>;
	qcom,sdcc-bus-width = <8>;
	qcom,sdcc-hs200;
	qcom,sdcc-nonremovable;
	};

	qcom,sdcc@f98a4000 {
	cell-index = <2>;
	compatible = "qcom,msm-sdcc";
	reg = <0xf98a4000 0x1000>;
	interrupts = <0 125 0>;

	qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000 200000000>;
	qcom,sdcc-sup-voltages = <2950 2950>;
	qcom,sdcc-bus-width = <4>;
	};

	qcom,sdcc@f9864000 {
	cell-index = <3>;
	compatible = "qcom,msm-sdcc";
	reg = <0xf9864000 0x1000>;
	interrupts = <0 127 0>;

	qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>;
	qcom,sdcc-sup-voltages = <1800 1800>;
	qcom,sdcc-bus-width = <4>;
	};

	qcom,sdcc@f98e4000 {
	cell-index = <4>;
	compatible = "qcom,msm-sdcc";
	reg = <0xf98e4000 0x1000>;
	interrupts = <0 129 0>;

	qcom,sdcc-clk-rates = <400000 25000000 50000000 100000000>;
	qcom,sdcc-sup-voltages = <1800 1800>;
	qcom,sdcc-bus-width = <4>;
	};

	qcom,sps@f9980000 {
	compatible = "qcom,msm_sps";
	reg = <0xf9984000 0x15000>,
	<0xf9999000 0xb000>;
	interrupts = <0 94 0>;

	qcom,bam-dma-res-pipes = <6>;
	};

	spi@f9924000 {
	compatible = "qcom,spi-qup-v2";
	reg = <0xf9924000 0x1000>;
	interrupts = <0 96 0>;
	spi-max-frequency = <24000000>;
	};

	slim@fe12f000 {
	cell-index = <1>;
	compatible = "qcom,slim-msm";
	reg = <0xfe12f000 0x35000>,
	<0xfe104000 0x20000>;
	reg-names = "slimbus_physical", "slimbus_bam_physical";
	interrupts = <0 163 0 0 164 0>;
	interrupt-names = "slimbus_irq", "slimbus_bam_irq";
	qcom,min-clk-gear = <10>;
	};

	qcom,spmi@fc4c0000 {
	cell-index = <0>;
	compatible = "qcom,spmi-pmic-arb";
	reg = <0xfc4cf000 0x1000>,
	<0Xfc4cb000 0x1000>;
	/* 190,ee0_krait_hlos_spmi_periph_irq */
	/* 187,channel_0_krait_hlos_trans_done_irq */
	interrupts = <0 190 0 0 187 0>;
	qcom,pmic-arb-ee = <0>;
	qcom,pmic-arb-channel = <0>;
	qcom,pmic-arb-ppid-map = <0x13000000>, /* PM8941_LDO1 */
	<0x13100001>, /* PM8941_LDO2 */
	<0x13200002>, /* PM8941_LDO3 */
	<0x13300003>, /* PM8941_LDO4 */
	<0x13400004>, /* PM8941_LDO5 */
	<0x13500005>, /* PM8941_LDO6 */
	<0x13600006>, /* PM8941_LDO7 */
	<0x13700007>, /* PM8941_LDO8 */
	<0x13800008>, /* PM8941_LDO9 */
	<0x13900009>, /* PM8941_LDO10 */
	<0x13a0000a>, /* PM8941_LDO11 */
	<0x13b0000b>, /* PM8941_LDO12 */
	<0x13c0000c>, /* PM8941_LDO13 */
	<0x13d0000d>, /* PM8941_LDO14 */
	<0x13e0000e>, /* PM8941_LDO15 */
	<0x13f0000f>, /* PM8941_LDO16 */
	<0x14000010>, /* PM8941_LDO17 */
	<0x14100011>, /* PM8941_LDO18 */
	<0x14200012>, /* PM8941_LDO19 */
	<0x14300013>, /* PM8941_LDO20 */
	<0x14400014>, /* PM8941_LDO21 */
	<0x14500015>, /* PM8941_LDO22 */
	<0x14600016>, /* PM8941_LDO23 */
	<0x14700017>, /* PM8941_LDO24 */
	<0x14800018>, /* PM8941_LDO25 */
	<0x14900019>, /* PM8941_LDO26 */
	<0x0c00001a>, /* PM8941_GPIO1 */
	<0x0c10001b>, /* PM8941_GPIO2 */
	<0x0c20001c>, /* PM8941_GPIO3 */
	<0x0c30001d>, /* PM8941_GPIO4 */
	<0x0c40001e>, /* PM8941_GPIO5 */
	<0x0c50001f>, /* PM8941_GPIO6 */
	<0x0c600020>, /* PM8941_GPIO7 */
	<0x0c700021>, /* PM8941_GPIO8 */
	<0x0c800022>, /* PM8941_GPIO9 */
	<0x0c900023>, /* PM8941_GPIO10 */
	<0x0ca00024>, /* PM8941_GPIO11 */
	<0x0cb00025>, /* PM8941_GPIO12 */
	<0x0cc00026>, /* PM8941_GPIO13 */
	<0x0cd00027>, /* PM8941_GPIO14 */
	<0x0ce00028>, /* PM8941_GPIO15 */
	<0x0cf00029>, /* PM8941_GPIO16 */
	<0x0d00002a>, /* PM8941_GPIO17 */
	<0x0d10002b>, /* PM8941_GPIO18 */
	<0x0d20002c>, /* PM8941_GPIO19 */
	<0x0d30002d>, /* PM8941_GPIO20 */
	<0x0d40002e>, /* PM8941_GPIO21 */
	<0x0d50002f>, /* PM8941_GPIO22 */
	<0x0d600030>, /* PM8941_GPIO23 */
	<0x0d700031>, /* PM8941_GPIO24 */
	<0x0d800032>, /* PM8941_GPIO25 */
	<0x0d900033>, /* PM8941_GPIO26 */
	<0x0da00034>, /* PM8941_GPIO27 */
	<0x0db00035>, /* PM8941_GPIO28 */
	<0x0dc00036>, /* PM8941_GPIO29 */
	<0x0dd00037>, /* PM8941_GPIO30 */
	<0x0de00038>, /* PM8941_GPIO31 */
	<0x0df00039>, /* PM8941_GPIO32 */
	<0x0e00003a>, /* PM8941_GPIO33 */
	<0x0e10003b>, /* PM8941_GPIO34 */
	<0x0e20003c>, /* PM8941_GPIO35 */
	<0x0e30003d>, /* PM8941_GPIO36 */
	<0x0280003e>, /* COINCELL */
	<0x0100003f>, /* SMBC_OVP */
	<0x01100040>, /* SMBC_CHG */
	<0x01200041>, /* SMBC_BIF */
	<0x00500042>, /* INTERRUPT */
	<0x00100043>, /* PM8941_0 */
	<0x20100044>, /* PM8841_0 */
	<0x10100045>, /* PM8941_1 */
	<0x30100046>, /* PM8841_1 */
	<0x00800047>, /* PON0 */
	<0x20800048>, /* PON1 */
	<0x11000049>, /* PM8941_SMPS1 */
	<0x1110004a>, /* PM8941_SMPS2 */
	<0x1120004b>, /* PM8941_SMPS3 */
	<0x3100004c>, /* PM8841_SMPS1 */
	<0x3110004d>, /* PM8841_SMPS2 */
	<0x3120004e>, /* PM8841_SMPS3 */
	<0x3130004f>, /* PM8841_SMPS4 */
	<0x31400050>, /* PM8841_SMPS5 */
	<0x31500051>, /* PM8841_SMPS6 */
	<0x31600052>, /* PM8841_SMPS7 */
	<0x31700053>, /* PM8841_SMPS8 */
	<0x05000054>, /* SHARED_XO */
	<0x05100055>, /* BB_CLK1 */
	<0x05200056>, /* BB_CLK2 */
	<0x05900057>, /* SLEEP_CLK */
	<0x07000058>, /* PBS_CORE */
	<0x07100059>, /* PBS_CLIENT1 */
	<0x0720005a>; /* PBS_CLIENT2 */
	};

	i2c@f9966000 {
	cell-index = <0>;
	compatible = "qcom,i2c-qup";
	reg = <0Xf9966000 0x1000>;
	reg-names = "qup_phys_addr";
	interrupts = <0 104 0>;
	interrupt-names = "qup_err_intr";
	qcom,i2c-bus-freq = <100000>;
	qcom,i2c-src-freq = <24000000>;
	};

	qcom,acpuclk@f9000000 {
	compatible = "qcom,acpuclk-copper";
	};

	qcom,ssusb@F9200000 {
	compatible = "qcom,dwc-usb3-msm";
	reg = <0xF9200000 0xCCFF>;
	interrupts = <0 131 0>;
	qcom,dwc-usb3-msm-dbm-eps = <4>;
	};

	qcom,lpass@fe200000 {
	compatible = "qcom,pil-q6v5-lpass";
	reg = <0xfe200000 0x00100>,
	<0xfd485100 0x00010>;

	qcom,firmware-name = "lpass";
	};

	qcom,pronto@fb21b000 {
	compatible = "qcom,pil-pronto";
	reg = <0xfb21b000 0x3000>,
	<0xfc401700 0x4>,
	<0xfd485300 0xc>;
	vdd_pronto_pll-supply = <&pm8941_l12>;

	qcom,firmware-name = "wcnss";
	};

	qcom,ocmem@fdd00000 {
	compatible = "qcom,msm_ocmem";
	};
	};