Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', 'pending-dma-streaming', 'u300' and 'umc' into devel
diff --git a/.gitignore b/.gitignore
index fb2190c..de6344e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -37,6 +37,7 @@
tags
TAGS
vmlinux
+vmlinuz
System.map
Module.markers
Module.symvers
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index da42ab4..74a8b6f 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -88,12 +88,12 @@
This is used primarily during fault processing.
5) void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
- described by "pte" now exists at virtual address "address"
- for address space "vma->vm_mm", in the software page tables.
+ now exists at virtual address "address" for address space
+ "vma->vm_mm", in the software page tables.
A port may use this information in any way it so chooses.
For example, it could use this event to pre-load TLB
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 870d190..0a46833 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -493,3 +493,52 @@
Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
+
+What: usbvideo quickcam_messenger driver
+When: 2.6.35
+Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv06xx
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ov511 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/ov511.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: w9968cf v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/w9968cf*.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ovcamchip sensor framework
+When: 2.6.35
+Files: drivers/media/video/ovcamchip/*
+Why: Only used by obsoleted v4l1 drivers
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: stv680 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/stv680.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv0680
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: zc0301 v4l driver
+When: 2.6.35
+Files: drivers/media/video/zc0301/*
+Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+ supports 2 USB-ID's (because it only supports a limited set of
+ sensors) wich are also supported by the gspca_zc3xx driver
+ (which supports 53 USB-ID's in total)
+Who: Hans de Goede <hdegoede@redhat.com>
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 220cc63..0d07513 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -177,7 +177,6 @@
CapBnd: ffffffffffffffff
voluntary_ctxt_switches: 0
nonvoluntary_ctxt_switches: 1
- Stack usage: 12 kB
This shows you nearly the same information you would get if you viewed it with
the ps command. In fact, ps uses the proc file system to obtain its
@@ -231,7 +230,6 @@
Mems_allowed_list Same as previous, but in "list format"
voluntary_ctxt_switches number of voluntary context switches
nonvoluntary_ctxt_switches number of non voluntary context switches
- Stack usage: stack usage high water mark (round up to page size)
..............................................................................
Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821
new file mode 100644
index 0000000..ced8359
--- /dev/null
+++ b/Documentation/hwmon/amc6821
@@ -0,0 +1,102 @@
+Kernel driver amc6821
+=====================
+
+Supported chips:
+ Texas Instruments AMC6821
+ Prefix: 'amc6821'
+ Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+ Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+temp1_input ro on-chip temperature
+temp1_min rw "
+temp1_max rw "
+temp1_crit rw "
+temp1_min_alarm ro "
+temp1_max_alarm ro "
+temp1_crit_alarm ro "
+
+temp2_input ro remote temperature
+temp2_min rw "
+temp2_max rw "
+temp2_crit rw "
+temp2_min_alarm ro "
+temp2_max_alarm ro "
+temp2_crit_alarm ro "
+temp2_fault ro "
+
+fan1_input ro tachometer speed
+fan1_min rw "
+fan1_max rw "
+fan1_fault ro "
+fan1_div rw Fan divisor can be either 2 or 4.
+
+pwm1 rw pwm1
+pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
+ by remote temperature, 3=fan controlled by
+ combination of the on-chip temperature and
+ remote-sensor temperature,
+pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
+ temperature channels.
+pwm1_auto_point2_pwm rw This value is shared for both temperature
+ channels.
+pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
+ temperature channels.
+
+temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
+ which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps of
+ 4 degree C. Read it out after writing to get
+ the actual value.
+temp1_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can go from temp1_auto_point2_temp.
+ It can only have certain discrete values
+ which depend on temp1_auto_point2_temp and
+ pwm1_auto_point2_pwm. Read it out after
+ writing to get the actual value.
+
+temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
+ it defines the passive cooling temperature.
+ Below this temperature the fan stops in
+ the closed loop mode.
+temp2_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps
+ of 4 degree C.
+
+temp2_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can only have certain discrete
+ values which depend on temp2_auto_point2_temp
+ and pwm1_auto_point2_pwm. Read it out after
+ writing to get actual value.
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+init=1,
+pwminv: 0 default pwm output, 1 inverts pwm output.
+
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index a7a18d4..6526eee 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -3,8 +3,8 @@
Supported chips:
* AMD Family 10h processors:
- Socket F: Quad-Core/Six-Core/Embedded Opteron
- Socket AM2+: Opteron, Phenom (II) X3/X4
+ Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+ Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
@@ -36,10 +36,15 @@
This driver permits reading of the internal temperature sensor of AMD
Family 10h and 11h processors.
-All these processors have a sensor, but on older revisions of Family 10h
-processors, the sensor may return inconsistent values (erratum 319). The
-driver will refuse to load on these revisions unless you specify the
-"force=1" module parameter.
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319). The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities. Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
There is one temperature measurement value, available as temp1_input in
sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 9473749..35cf64d 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -56,10 +56,11 @@
(5) When following the convention, the driver code can use generic
code to copy the parameters between user and kernel space.
-This table lists ioctls visible from user land for Linux/i386. It contains
-most drivers up to 2.3.14, but I know I am missing some.
+This table lists ioctls visible from user land for Linux/x86. It contains
+most drivers up to 2.6.31, but I know I am missing some. There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
-Code Seq# Include File Comments
+Code Seq#(hex) Include File Comments
========================================================
0x00 00-1F linux/fs.h conflict!
0x00 00-1F scsi/scsi_ioctl.h conflict!
@@ -69,119 +70,228 @@
0x03 all linux/hdreg.h
0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these.
0x06 all linux/lp.h
-0x09 all linux/md.h
+0x09 all linux/raid/md_u.h
+0x10 00-0F drivers/char/s390/vmcp.h
0x12 all linux/fs.h
linux/blkpg.h
0x1b all InfiniBand Subsystem <http://www.openib.org/>
0x20 all drivers/cdrom/cm206.h
0x22 all scsi/sg.h
'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem
+'$' 00-0F linux/perf_counter.h, linux/perf_event.h
'1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl
<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2' 01-04 linux/i2o.h
+'3' 00-0F drivers/s390/char/raw3270.h conflict!
+'3' 00-1F linux/suspend_ioctls.h conflict!
+ and kernel/power/user.c
'8' all SNP8023 advanced NIC card
<mailto:mcr@solidum.com>
-'A' 00-1F linux/apm_bios.h
+'@' 00-0F linux/radeonfb.h conflict!
+'@' 00-0F drivers/video/aty/aty128fb.c conflict!
+'A' 00-1F linux/apm_bios.h conflict!
+'A' 00-0F linux/agpgart.h conflict!
+ and drivers/char/agp/compat_ioctl.h
+'A' 00-7F sound/asound.h conflict!
+'B' 00-1F linux/cciss_ioctl.h conflict!
+'B' 00-0F include/linux/pmu.h conflict!
'B' C0-FF advanced bbus
<mailto:maassen@uni-freiburg.de>
-'C' all linux/soundcard.h
+'C' all linux/soundcard.h conflict!
+'C' 01-2F linux/capi.h conflict!
+'C' F0-FF drivers/net/wan/cosa.h conflict!
'D' all arch/s390/include/asm/dasd.h
-'E' all linux/input.h
-'F' all linux/fb.h
-'H' all linux/hiddev.h
-'I' all linux/isdn.h
+'D' 40-5F drivers/scsi/dpt/dtpi_ioctl.h
+'D' 05 drivers/scsi/pmcraid.h
+'E' all linux/input.h conflict!
+'E' 00-0F xen/evtchn.h conflict!
+'F' all linux/fb.h conflict!
+'F' 01-02 drivers/scsi/pmcraid.h conflict!
+'F' 20 drivers/video/fsl-diu-fb.h conflict!
+'F' 20 drivers/video/intelfb/intelfb.h conflict!
+'F' 20 linux/ivtvfb.h conflict!
+'F' 20 linux/matroxfb.h conflict!
+'F' 20 drivers/video/aty/atyfb_base.c conflict!
+'F' 00-0F video/da8xx-fb.h conflict!
+'F' 80-8F linux/arcfb.h conflict!
+'F' DD video/sstfb.h conflict!
+'G' 00-3F drivers/misc/sgi-gru/grulib.h conflict!
+'G' 00-0F linux/gigaset_dev.h conflict!
+'H' 00-7F linux/hiddev.h conflict!
+'H' 00-0F linux/hidraw.h conflict!
+'H' 00-0F sound/asound.h conflict!
+'H' 20-40 sound/asound_fm.h conflict!
+'H' 80-8F sound/sfnt_info.h conflict!
+'H' 10-8F sound/emu10k1.h conflict!
+'H' 10-1F sound/sb16_csp.h conflict!
+'H' 10-1F sound/hda_hwdep.h conflict!
+'H' 40-4F sound/hdspm.h conflict!
+'H' 40-4F sound/hdsp.h conflict!
+'H' 90 sound/usb/usx2y/usb_stream.h
+'H' C0-F0 net/bluetooth/hci.h conflict!
+'H' C0-DF net/bluetooth/hidp/hidp.h conflict!
+'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict!
+'H' C0-DF net/bluetooth/bnep/bnep.h conflict!
+'I' all linux/isdn.h conflict!
+'I' 00-0F drivers/isdn/divert/isdn_divert.h conflict!
+'I' 40-4F linux/mISDNif.h conflict!
'J' 00-1F drivers/scsi/gdth_ioctl.h
'K' all linux/kd.h
-'L' 00-1F linux/loop.h
-'L' 20-2F driver/usb/misc/vstusb.h
+'L' 00-1F linux/loop.h conflict!
+'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict!
+'L' 20-2F linux/usb/vstusb.h
'L' E0-FF linux/ppdd.h encrypted disk device driver
<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M' all linux/soundcard.h
+'M' all linux/soundcard.h conflict!
+'M' 01-16 mtd/mtd-abi.h conflict!
+ and drivers/mtd/mtdchar.c
+'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h
+'M' 00-0F drivers/video/fsl-diu-fb.h conflict!
'N' 00-1F drivers/usb/scanner.h
-'O' 00-02 include/mtd/ubi-user.h UBI
-'P' all linux/soundcard.h
+'O' 00-06 mtd/ubi-user.h UBI
+'P' all linux/soundcard.h conflict!
+'P' 60-6F sound/sscape_ioctl.h conflict!
+'P' 00-0F drivers/usb/class/usblp.c conflict!
'Q' all linux/soundcard.h
-'R' 00-1F linux/random.h
+'R' 00-1F linux/random.h conflict!
+'R' 01 linux/rfkill.h conflict!
+'R' 01-0F media/rds.h conflict!
+'R' C0-DF net/bluetooth/rfcomm.h
'S' all linux/cdrom.h conflict!
'S' 80-81 scsi/scsi_ioctl.h conflict!
'S' 82-FF scsi/scsi.h conflict!
+'S' 00-7F sound/asequencer.h conflict!
'T' all linux/soundcard.h conflict!
+'T' 00-AF sound/asound.h conflict!
'T' all arch/x86/include/asm/ioctls.h conflict!
-'U' 00-EF linux/drivers/usb/usb.h
-'V' all linux/vt.h
+'T' C0-DF linux/if_tun.h conflict!
+'U' all sound/asound.h conflict!
+'U' 00-0F drivers/media/video/uvc/uvcvideo.h conflict!
+'U' 00-CF linux/uinput.h conflict!
+'U' 00-EF linux/usbdevice_fs.h
+'U' C0-CF drivers/bluetooth/hci_uart.h
+'V' all linux/vt.h conflict!
+'V' all linux/videodev2.h conflict!
+'V' C0 linux/ivtvfb.h conflict!
+'V' C0 linux/ivtv.h conflict!
+'V' C0 media/davinci/vpfe_capture.h conflict!
+'V' C0 media/si4713.h conflict!
+'V' C0-CF drivers/media/video/mxb.h conflict!
'W' 00-1F linux/watchdog.h conflict!
'W' 00-1F linux/wanrouter.h conflict!
-'X' all linux/xfs_fs.h
+'W' 00-3F sound/asound.h conflict!
+'X' all fs/xfs/xfs_fs.h conflict!
+ and fs/xfs/linux-2.6/xfs_ioctl32.h
+ and include/linux/falloc.h
+ and linux/fs.h
+'X' all fs/ocfs2/ocfs_fs.h conflict!
+'X' 01 linux/pktcdvd.h conflict!
'Y' all linux/cyclades.h
-'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices
+'Z' 14-15 drivers/message/fusion/mptctl.h
+'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@suse.de>
-'a' all ATM on linux
+'a' all linux/atm*.h, linux/sonet.h ATM on linux
<http://lrcwww.epfl.ch/linux-atm/magic.html>
-'b' 00-FF bit3 vme host bridge
+'b' 00-FF conflict! bit3 vme host bridge
<mailto:natalia@nikhefk.nikhef.nl>
+'b' 00-0F media/bt819.h conflict!
+'c' all linux/cm4000_cs.h conflict!
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
-'c' 80-9F arch/s390/include/asm/chsc.h
-'c' A0-AF arch/x86/include/asm/msr.h
+'c' 00-1F linux/chio.h conflict!
+'c' 80-9F arch/s390/include/asm/chsc.h conflict!
+'c' A0-AF arch/x86/include/asm/msr.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
+'d' 02-40 pcmcia/ds.h conflict!
+'d' 10-3F drivers/media/video/dabusb.h conflict!
+'d' C0-CF drivers/media/video/saa7191.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
-'e' 00-1F net/irda/irtty.h conflict!
-'f' 00-1F linux/ext2_fs.h
-'h' 00-7F Charon filesystem
+'e' 00-1F drivers/net/irda/irtty-sir.h conflict!
+'f' 00-1F linux/ext2_fs.h conflict!
+'f' 00-1F linux/ext3_fs.h conflict!
+'f' 00-0F fs/jfs/jfs_dinode.h conflict!
+'f' 00-0F fs/ext4/ext4.h conflict!
+'f' 00-0F linux/fs.h conflict!
+'f' 00-0F fs/ocfs2/ocfs2_fs.h conflict!
+'g' 00-0F linux/usb/gadgetfs.h
+'g' 20-2F linux/usb/g_printer.h
+'h' 00-7F conflict! Charon filesystem
<mailto:zapman@interlan.net>
-'i' 00-3F linux/i2o.h
+'h' 00-1F linux/hpet.h conflict!
+'i' 00-3F linux/i2o-dev.h conflict!
+'i' 0B-1F linux/ipmi.h conflict!
+'i' 80-8F linux/i8k.h
'j' 00-3F linux/joystick.h
+'k' 00-0F linux/spi/spidev.h conflict!
+'k' 00-05 video/kyro.h conflict!
'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
-'m' 00-09 linux/mmtimer.h
+'m' 00-09 linux/mmtimer.h conflict!
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!
+'m' 00-19 drivers/message/fusion/mptctl.h conflict!
+'m' 00 drivers/scsi/megaraid/megaraid_ioctl.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
-'n' 00-7F linux/ncp_fs.h
+'n' 00-7F linux/ncp_fs.h and fs/ncpfs/ioctl.c
'n' 80-8F linux/nilfs2_fs.h NILFS2
-'n' E0-FF video/matrox.h matroxfb
+'n' E0-FF linux/matroxfb.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
-'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
-'o' 40-41 include/mtd/ubi-user.h UBI
-'o' 01-A1 include/linux/dvb/*.h DVB
+'o' 00-03 mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
+'o' 40-41 mtd/ubi-user.h UBI
+'o' 01-A1 linux/dvb/*.h DVB
'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this)
+'p' 00-1F linux/rtc.h conflict!
'p' 00-3F linux/mc146818rtc.h conflict!
'p' 40-7F linux/nvram.h
-'p' 80-9F user-space parport
+'p' 80-9F linux/ppdev.h user-space parport
<mailto:tim@cyberelk.net>
-'p' a1-a4 linux/pps.h LinuxPPS
+'p' A1-A4 linux/pps.h LinuxPPS
<mailto:giometti@linux.it>
'q' 00-1F linux/serio.h
-'q' 80-FF Internet PhoneJACK, Internet LineJACK
- <http://www.quicknet.net>
-'r' 00-1F linux/msdos_fs.h
+'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK
+ linux/ixjuser.h <http://www.quicknet.net>
+'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c
's' all linux/cdk.h
't' 00-7F linux/if_ppp.h
't' 80-8F linux/isdn_ppp.h
+'t' 90 linux/toshiba.h
'u' 00-1F linux/smb_fs.h
-'v' 00-1F linux/ext2_fs.h conflict!
'v' all linux/videodev.h conflict!
+'v' 00-1F linux/ext2_fs.h conflict!
+'v' 00-1F linux/fs.h conflict!
+'v' 00-0F linux/sonypi.h conflict!
+'v' C0-CF drivers/media/video/ov511.h conflict!
+'v' C0-DF media/pwc-ioctl.h conflict!
+'v' C0-FF linux/meye.h conflict!
+'v' C0-CF drivers/media/video/zoran/zoran.h conflict!
+'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict!
'w' all CERN SCI driver
'y' 00-1F packet based user level communications
<mailto:zapman@interlan.net>
-'z' 00-3F CAN bus card
+'z' 00-3F CAN bus card conflict!
<mailto:hdstich@connectu.ulm.circular.de>
-'z' 40-7F CAN bus card
+'z' 40-7F CAN bus card conflict!
<mailto:oe@port.de>
+'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict!
0x80 00-1F linux/fb.h
0x81 00-1F linux/videotext.h
+0x88 00-3F media/ovcamchip.h
0x89 00-06 arch/x86/include/asm/sockios.h
0x89 0B-DF linux/sockios.h
0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range
+0x89 E0-EF linux/dn.h PROTOPRIVATE range
0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range
0x8B all linux/wireless.h
0x8C 00-3F WiNRADiO driver
<http://www.proximity.com.au/~brian/winradio/>
0x90 00 drivers/cdrom/sbpcd.h
+0x92 00-0F drivers/usb/mon/mon_bin.c
0x93 60-7F linux/auto_fs.h
+0x94 all fs/btrfs/ioctl.h
0x99 00-0F 537-Addinboard driver
<mailto:buk@buks.ipn.de>
0xA0 all linux/sdp/sdp.h Industrial Device Project
@@ -192,17 +302,22 @@
0xAB 00-1F linux/nbd.h
0xAC 00-1F linux/raw.h
0xAD 00 Netfilter device in development:
- <mailto:rusty@rustcorp.com.au>
+ <mailto:rusty@rustcorp.com.au>
0xAE all linux/kvm.h Kernel-based Virtual Machine
<mailto:kvm@vger.kernel.org>
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
+0xC0 00-0F linux/usb/iowarrior.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
+0xCD 01 linux/reiserfs_fs.h
+0xCF 02 fs/cifs/ioctl.c
+0xDB 00-0F drivers/char/mwave/mwavepub.h
0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
<mailto:aherrman@de.ibm.com>
-0xF3 00-3F video/sisfb.h sisfb (in development)
+0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development)
<mailto:thomas@winischhofer.net>
0xF4 00-1F video/mbxfb.h mbxfb
<mailto:raph@8d.com>
+0xFD all linux/dm-ioctl.h
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 348b9e5..27a52b3 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -214,11 +214,13 @@
* (section header: (section description)? )*
(*)?*/
-The short function description ***cannot be multiline***, but the other
-descriptions can be (and they can contain blank lines). If you continue
-that initial short description onto a second line, that second line will
-appear further down at the beginning of the description section, which is
-almost certainly not what you had in mind.
+All "description" text can span multiple lines, although the
+function_name & its short description are traditionally on a single line.
+Description text may also contain blank lines (i.e., lines that contain
+only a "*").
+
+"section header:" names must be unique per function (or struct,
+union, typedef, enum).
Avoid putting a spurious blank line after the function name, or else the
description will be repeated!
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index 0643e3b..3c45d5d 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -48,11 +48,11 @@
This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
- options 3c509 xcvr=3,1 irq=10,11
+ options 3c509 irq=10,11
(2) Full-duplex mode
@@ -77,6 +77,8 @@
itself full-duplex capable. This is almost certainly one of two things: a full-
duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
/////Extremely important caution concerning full-duplex mode/////
Understand that the 3c509B's hardware's full-duplex support is much more
@@ -113,6 +115,8 @@
never automatically enable full-duplex mode in an existing installation;
it must always be explicitly enabled via one of these code in order to be
activated.
+
+The transceiver type can be changed using 'ethtool'.
(4a) Interpretation of error messages and common problems
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
index 5b1d23d..d299ff3 100644
--- a/Documentation/trace/ring-buffer-design.txt
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -33,9 +33,9 @@
tail_page - a pointer to the page that will be written to next
-commit_page - a pointer to the page with the last finished non nested write.
+commit_page - a pointer to the page with the last finished non-nested write.
-cmpxchg - hardware assisted atomic transaction that performs the following:
+cmpxchg - hardware-assisted atomic transaction that performs the following:
A = B iff previous A == C
@@ -52,15 +52,15 @@
The ring buffer can be used in either an overwrite mode or in
producer/consumer mode.
-Producer/consumer mode is where the producer were to fill up the
+Producer/consumer mode is where if the producer were to fill up the
buffer before the consumer could free up anything, the producer
will stop writing to the buffer. This will lose most recent events.
-Overwrite mode is where the produce were to fill up the buffer
+Overwrite mode is where if the producer were to fill up the buffer
before the consumer could free up anything, the producer will
overwrite the older data. This will lose the oldest events.
-No two writers can write at the same time (on the same per cpu buffer),
+No two writers can write at the same time (on the same per-cpu buffer),
but a writer may interrupt another writer, but it must finish writing
before the previous writer may continue. This is very important to the
algorithm. The writers act like a "stack". The way interrupts works
@@ -79,16 +79,16 @@
Readers can happen at any time. But no two readers may run at the
same time, nor can a reader preempt/interrupt another reader. A reader
-can not preempt/interrupt a writer, but it may read/consume from the
+cannot preempt/interrupt a writer, but it may read/consume from the
buffer at the same time as a writer is writing, but the reader must be
on another processor to do so. A reader may read on its own processor
and can be preempted by a writer.
-A writer can preempt a reader, but a reader can not preempt a writer.
+A writer can preempt a reader, but a reader cannot preempt a writer.
But a reader can read the buffer at the same time (on another processor)
as a writer.
-The ring buffer is made up of a list of pages held together by a link list.
+The ring buffer is made up of a list of pages held together by a linked list.
At initialization a reader page is allocated for the reader that is not
part of the ring buffer.
@@ -102,7 +102,7 @@
The reader has its own page to use. At start up time, this page is
allocated but is not attached to the list. When the reader wants
-to read from the buffer, if its page is empty (like it is on start up)
+to read from the buffer, if its page is empty (like it is on start-up),
it will swap its page with the head_page. The old reader page will
become part of the ring buffer and the head_page will be removed.
The page after the inserted page (old reader_page) will become the
@@ -206,7 +206,7 @@
commit page - the page that last finished a write.
-The commit page only is updated by the outer most writer in the
+The commit page only is updated by the outermost writer in the
writer stack. A writer that preempts another writer will not move the
commit page.
@@ -281,7 +281,7 @@
The commit pointer points to the last write location that was
committed without preempting another write. When a write that
preempted another write is committed, it only becomes a pending commit
-and will not be a full commit till all writes have been committed.
+and will not be a full commit until all writes have been committed.
The commit page points to the page that has the last full commit.
The tail page points to the page with the last write (before
@@ -292,7 +292,7 @@
page then no more writes may take place (regardless of the mode
of the ring buffer: overwrite and produce/consumer).
-The order of pages are:
+The order of pages is:
head page
commit page
@@ -311,7 +311,7 @@
There is a special case that the head page is after either the commit page
and possibly the tail page. That is when the commit (and tail) page has been
swapped with the reader page. This is because the head page is always
-part of the ring buffer, but the reader page is not. When ever there
+part of the ring buffer, but the reader page is not. Whenever there
has been less than a full page that has been committed inside the ring buffer,
and a reader swaps out a page, it will be swapping out the commit page.
@@ -338,7 +338,7 @@
In this case, the head page will not move when the tail and commit
move back into the ring buffer.
-The reader can not swap a page into the ring buffer if the commit page
+The reader cannot swap a page into the ring buffer if the commit page
is still on that page. If the read meets the last commit (real commit
not pending or reserved), then there is nothing more to read.
The buffer is considered empty until another full commit finishes.
@@ -395,7 +395,7 @@
of the head_page pointer with the swapping of pages with the reader.
State flags are placed inside the pointer to the page. To do this,
each page must be aligned in memory by 4 bytes. This will allow the 2
-least significant bits of the address to be used as flags. Since
+least significant bits of the address to be used as flags, since
they will always be zero for the address. To get the address,
simply mask out the flags.
@@ -460,7 +460,7 @@
will also use cmpxchg. If the flag bit in the pointer to the
head page does not have the HEADER flag set, the compare will fail
and the reader will need to look for the new head page and try again.
-Note, the flag UPDATE and HEADER are never set at the same time.
+Note, the flags UPDATE and HEADER are never set at the same time.
The reader swaps the reader page as follows:
@@ -539,7 +539,7 @@
| +-----------------------------+ |
+------------------------------------+
-Another important point. The page that the reader page points back to
+Another important point: The page that the reader page points back to
by its previous pointer (the one that now points to the new head page)
never points back to the reader page. That is because the reader page is
not part of the ring buffer. Traversing the ring buffer via the next pointers
@@ -572,7 +572,7 @@
move the head page, until the writer is finished with the move.
This eliminates any races that the reader can have on the writer. The reader
-must spin, and this is why the reader can not preempt the writer.
+must spin, and this is why the reader cannot preempt the writer.
tail page
|
@@ -659,9 +659,9 @@
tail page wrapped the buffer, and we must drop new writes.
This is not a race condition, because the commit page can only be moved
-by the outter most writer (the writer that was preempted).
+by the outermost writer (the writer that was preempted).
This means that the commit will not move while a writer is moving the
-tail page. The reader can not swap the reader page if it is also being
+tail page. The reader cannot swap the reader page if it is also being
used as the commit page. The reader can simply check that the commit
is off the reader page. Once the commit page leaves the reader page
it will never go back on it unless a reader does another swap with the
@@ -733,7 +733,7 @@
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-But if a nested writer preempts here. It will see that the next
+But if a nested writer preempts here, it will see that the next
page is a head page, but it is also nested. It will detect that
it is nested and will save that information. The detection is the
fact that it sees the UPDATE flag instead of a HEADER or NORMAL
@@ -761,7 +761,7 @@
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-After the nested writer finishes, the outer most writer will convert
+After the nested writer finishes, the outermost writer will convert
the UPDATE pointer to NORMAL.
@@ -812,7 +812,7 @@
+---+ +---+ +---+ +---+
The nested writer moves the tail page forward. But does not set the old
-update page to NORMAL because it is not the outer most writer.
+update page to NORMAL because it is not the outermost writer.
tail page
|
@@ -892,7 +892,7 @@
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-The first writer can not know atomically test if the tail page moved
+The first writer cannot know atomically if the tail page moved
while it updates the HEAD page. It will then update the head page to
what it thinks is the new head page.
@@ -923,9 +923,9 @@
--->| |<---| |<---| |<---| |<---
+---+ +---+ +---+ +---+
-If tail page != A and tail page does not equal B, then it must reset the
-pointer back to NORMAL. The fact that it only needs to worry about
-nested writers, it only needs to check this after setting the HEAD page.
+If tail page != A and tail page != B, then it must reset the pointer
+back to NORMAL. The fact that it only needs to worry about nested
+writers means that it only needs to check this after setting the HEAD page.
(first writer)
@@ -939,7 +939,7 @@
+---+ +---+ +---+ +---+
Now the writer can update the head page. This is also why the head page must
-remain in UPDATE and only reset by the outer most writer. This prevents
+remain in UPDATE and only reset by the outermost writer. This prevents
the reader from seeing the incorrect head page.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6914588..1858646 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -410,9 +410,8 @@
ALPHA PORT
M: Richard Henderson <rth@twiddle.net>
-S: Odd Fixes for 2.4; Maintained for 2.6.
M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S: Maintained for 2.4; PCI support for 2.6.
+M: Matt Turner <mattst88@gmail.com>
L: linux-alpha@vger.kernel.org
F: arch/alpha/
@@ -1638,9 +1637,8 @@
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
M: Andy Walls <awalls@radix.net>
-L: ivtv-devel@ivtvdriver.org
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
@@ -3012,8 +3010,8 @@
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
-L: ivtv-devel@ivtvdriver.org
+M: Andy Walls <awalls@radix.net>
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
@@ -3940,29 +3938,20 @@
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
-M: Imre Deak <imre.deak@nokia.com>
+M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-fbdev@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
-OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
L: linux-omap@vger.kernel.org
-L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
+L: linux-fbdev@vger.kernel.org
S: Maintained
-F: drivers/video/omap2/dss/
-F: drivers/video/omap2/vrfb.c
-F: drivers/video/omap2/vram.c
+F: drivers/video/omap2/
F: Documentation/arm/OMAP/DSS
-OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
-M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-L: linux-omap@vger.kernel.org
-L: linux-fbdev@vger.kernel.org (moderated for non-subscribers)
-S: Maintained
-F: drivers/video/omap2/omapfb/
-
OMAP MMC SUPPORT
M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
diff --git a/Makefile b/Makefile
index 1231094..5f333bf 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@@ -18,10 +18,9 @@
# Avoid funny character set dependencies
unexport LC_ALL
-LC_CTYPE=C
LC_COLLATE=C
LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f..71a2432 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -329,7 +329,7 @@
* tables contain all the necessary information.
*/
extern inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index 36b3a30..9251e13 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -28,6 +28,9 @@
{
int cpu;
+ if (node == -1)
+ return cpu_all_mask;
+
cpumask_clear(&node_to_cpumask_map[node]);
for_each_online_cpu(cpu) {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 233a222..b0c3c0d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -18,6 +18,8 @@
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZO
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -548,6 +550,15 @@
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+config ARCH_NUC93X
+ bool "Nuvoton NUC93X CPU"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+ low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -688,6 +699,7 @@
select HAVE_IDE
select COMMON_CLKDEV
select GENERIC_ALLOCATOR
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's DaVinci platform.
@@ -757,6 +769,8 @@
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-nuc93x/Kconfig"
+
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e9da084..3eaef16 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -170,6 +170,7 @@
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index ce39dc5..2d4d88b 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -63,8 +63,12 @@
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
-targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
- head.o misc.o $(OBJS)
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO) = lzo
+
+targets := vmlinux vmlinux.lds \
+ piggy.$(suffix_y) piggy.$(suffix_y).o \
+ font.o font.c head.o misc.o $(OBJS)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -87,22 +91,34 @@
ifneq ($(PARAMS_PHYS),)
LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
endif
-LDFLAGS_vmlinux += -p --no-undefined -X \
- $(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+ $(call cmd,shipped)
# Don't allow any static data in misc.o, which
# would otherwise mess up our GOT table
CFLAGS_misc.o := -Dstatic=
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
- $(addprefix $(obj)/, $(OBJS)) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)
@:
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+ $(call if_changed,$(suffix_y))
-$(obj)/piggy.o: $(obj)/piggy.gz FORCE
+$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE
CFLAGS_font.o := -Dstatic=
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 17153b5..7e0fe4d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,10 +18,15 @@
unsigned int __machine_arch_type;
+#define _LINUX_STRING_H_
+
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <asm/string.h>
+#include <linux/linkage.h>
+
+#include <asm/unaligned.h>
#ifdef STANDALONE_DEBUG
#define putstr printf
@@ -188,34 +193,8 @@
/*
* gzip delarations
*/
-#define OF(args) args
#define STATIC static
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize; /* valid bytes in inbuf */
-static unsigned inptr; /* index of next byte to be processed in inbuf */
-static unsigned outcnt; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
@@ -233,24 +212,20 @@
# define Tracecv(c,x)
#endif
-static int fill_inbuf(void);
-static void flush_window(void);
static void error(char *m);
extern char input_data[];
extern char input_data_end[];
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
+static unsigned char *output_data;
+static unsigned long output_ptr;
static void error(char *m);
static void putstr(const char *);
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
#ifdef STANDALONE_DEBUG
#define NO_INFLATE_MALLOC
@@ -258,46 +233,13 @@
#define ARCH_HAS_DECOMP_WDOG
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
- if (insize != 0)
- error("ran out of input data");
-
- inbuf = input_data;
- insize = &input_data_end[0] - &input_data[0];
-
- inptr = 1;
- return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
- ulg c = crc;
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
- putstr(".");
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
#ifndef arch_error
#define arch_error(x)
@@ -314,22 +256,33 @@
while(1); /* Halt */
}
+asmlinkage void __div0(void)
+{
+ error("Attempting division by 0!");
+}
+
#ifndef STANDALONE_DEBUG
-ulg
-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
- int arch_id)
+unsigned long
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+ unsigned long free_mem_ptr_end_p,
+ int arch_id)
{
- output_data = (uch *)output_start; /* Points to kernel start */
+ unsigned char *tmp;
+
+ output_data = (unsigned char *)output_start;
free_mem_ptr = free_mem_ptr_p;
free_mem_end_ptr = free_mem_ptr_end_p;
__machine_arch_type = arch_id;
arch_decomp_setup();
- makecrc();
+ tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+ output_ptr = get_unaligned_le32(tmp);
+
putstr("Uncompressing Linux...");
- gunzip();
+ decompress(input_data, input_data_end - input_data,
+ NULL, NULL, output_data, NULL, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}
@@ -341,11 +294,10 @@
{
output_data = output_buffer;
- makecrc();
putstr("Uncompressing Linux...");
- gunzip();
+ decompress(input_data, input_data_end - input_data,
+ NULL, NULL, output_data, NULL, error);
putstr("done.\n");
return 0;
}
#endif
-
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.gzip.S
similarity index 67%
rename from arch/arm/boot/compressed/piggy.S
rename to arch/arm/boot/compressed/piggy.gzip.S
index 54c9518..a68adf9 100644
--- a/arch/arm/boot/compressed/piggy.S
+++ b/arch/arm/boot/compressed/piggy.gzip.S
@@ -1,6 +1,6 @@
.section .piggydata,#alloc
.globl input_data
input_data:
- .incbin "arch/arm/boot/compressed/piggy.gz"
+ .incbin "arch/arm/boot/compressed/piggy.gzip"
.globl input_data_end
input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.lzo.S
similarity index 67%
copy from arch/arm/boot/compressed/piggy.S
copy to arch/arm/boot/compressed/piggy.lzo.S
index 54c9518..a425ad9 100644
--- a/arch/arm/boot/compressed/piggy.S
+++ b/arch/arm/boot/compressed/piggy.lzo.S
@@ -1,6 +1,6 @@
.section .piggydata,#alloc
.globl input_data
input_data:
- .incbin "arch/arm/boot/compressed/piggy.gz"
+ .incbin "arch/arm/boot/compressed/piggy.lzo"
.globl input_data_end
input_data_end:
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cc32c1e..cc0a932 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -277,7 +277,7 @@
* We don't need to sync the DMA buffer since
* it was allocated via the coherent allocators.
*/
- dma_cache_maint(ptr, size, dir);
+ __dma_single_cpu_to_dev(ptr, size, dir);
}
return dma_addr;
@@ -315,6 +315,8 @@
__cpuc_flush_dcache_area(ptr, size);
}
free_safe_buffer(dev->archdata.dmabounce, buf);
+ } else {
+ __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
}
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941..1cf999a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
@@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void vic_ack_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
- /* moreover, clear the soft-triggered, in case it was the reason */
- writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
- int i;
-
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
@@ -99,13 +58,34 @@
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+static int vic_id;
+
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
+#endif /* CONFIG_PM */
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@
};
/**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
- struct vic_device *v;
-
- if (vic_id >= ARRAY_SIZE(vic_devices))
- printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
- }
-}
-
-/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
@@ -219,9 +174,60 @@
return 0;
}
-
late_initcall(vic_pm_init);
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
@@ -255,10 +261,7 @@
return 0;
}
-
#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
#define vic_set_wake NULL
#endif /* CONFIG_PM */
@@ -270,80 +273,6 @@
.set_wake = vic_set_wake,
};
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
-{
- unsigned int i;
- u32 cellid = 0;
- enum amba_vendor vendor;
-
- /* Identify which VIC cell this one is, by reading the ID */
- for (i = 0; i < 4; i++) {
- u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
- cellid |= (readl(addr) & 0xff) << (8 * i);
- }
- vendor = (cellid >> 12) & 0xff;
- printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
- base, cellid, vendor);
-
- switch(vendor) {
- case AMBA_VENDOR_ST:
- vik_init_st(base, irq_start, vic_sources);
- return;
- default:
- printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
- /* fall through */
- case AMBA_VENDOR_ARM:
- break;
- }
-
- /* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts
- */
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
-
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
-
- vic_init2(base);
-
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
-
- vic_pm_register(base, irq_start, resume_sources);
-}
-
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
@@ -351,7 +280,7 @@
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
@@ -400,3 +329,73 @@
}
}
}
+
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vic_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts
+ */
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+
+ vic_init2(base);
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+
+ vic_pm_register(base, irq_start, resume_sources);
+}
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 610ac3c..9155196 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan 6 00:01:36 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -155,6 +183,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -265,12 +295,10 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
@@ -499,14 +527,21 @@
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -517,6 +552,7 @@
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -539,6 +575,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -645,7 +682,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -661,6 +697,8 @@
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -708,6 +746,7 @@
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -716,6 +755,8 @@
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -723,6 +764,7 @@
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_AB3100=y
# CONFIG_REGULATOR_TPS65023 is not set
@@ -840,7 +882,9 @@
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -882,6 +926,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -911,7 +956,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_AB3100=y
@@ -926,6 +973,15 @@
#
# DMA Devices
#
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
@@ -1018,7 +1074,7 @@
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@@ -1135,6 +1191,7 @@
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1142,7 +1199,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 730aefc..be8b4d7 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -182,21 +182,6 @@
* DMA Cache Coherency
* ===================
*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- * - start - virtual start address
- * - end - virtual end address
- *
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- * - start - virtual start address
- * - end - virtual end address
- *
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -213,8 +198,9 @@
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_area)(void *, size_t);
- void (*dma_inv_range)(const void *, const void *);
- void (*dma_clean_range)(const void *, const void *);
+ void (*dma_map_area)(const void *, size_t, int);
+ void (*dma_unmap_area)(const void *, size_t, int);
+
void (*dma_flush_range)(const void *, const void *);
};
@@ -244,8 +230,8 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range cpu_cache.dma_inv_range
-#define dmac_clean_range cpu_cache.dma_clean_range
+#define dmac_map_area cpu_cache.dma_map_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
@@ -270,12 +256,12 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
#endif
@@ -316,12 +302,8 @@
* processes address space. Really, we want to allow our "user
* space" model to handle this.
*/
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
- } while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+ unsigned long, void *, const void *, unsigned long);
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
@@ -355,17 +337,6 @@
}
}
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
-{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
-}
-
#ifndef CONFIG_CPU_CACHE_VIPT
#define flush_cache_mm(mm) \
vivt_flush_cache_mm(mm)
@@ -373,15 +344,10 @@
vivt_flush_cache_range(vma,start,end)
#define flush_cache_page(vma,addr,pfn) \
vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
- vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write);
#endif
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
index 634b2d7..7939681 100644
--- a/arch/arm/include/asm/cpu.h
+++ b/arch/arm/include/asm/cpu.h
@@ -11,6 +11,7 @@
#define __ASM_ARM_CPU_H
#include <linux/percpu.h>
+#include <linux/cpu.h>
struct cpuinfo_arm {
struct cpu cpu;
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index a96300b..256ee1c 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -57,18 +57,58 @@
#endif
/*
- * DMA-consistent mapping functions. These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices. This is the "generic" version. The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership". A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device. These helper functions
+ * represent the transitions between these two ownership states.
*
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches. We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change. Drivers must not use these.
*/
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_cpu_to_dev(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_dev_to_cpu(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_dev_to_cpu(page, off, size, dir);
+}
/*
* Return whether the given device DMA address mask can be supported
@@ -304,8 +344,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint(cpu_addr, size, dir);
+ __dma_single_cpu_to_dev(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
@@ -329,8 +368,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint_page(page, offset, size, dir);
+ __dma_page_cpu_to_dev(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
@@ -352,7 +390,7 @@
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
}
/**
@@ -372,7 +410,8 @@
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+ size, dir);
}
#endif /* CONFIG_DMABOUNCE */
@@ -400,7 +439,10 @@
{
BUG_ON(!valid_dma_direction(dir));
- dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+ if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+ return;
+
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -412,8 +454,7 @@
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
- if (!arch_is_coherent())
- dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+ __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 7edf353..ca51143 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -138,12 +138,12 @@
#define NO_DMA 255
#endif
+#endif /* CONFIG_ISA_DMA_API */
+
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy (0)
#endif
-#endif /* CONFIG_ISA_DMA_API */
-
#endif /* __ASM_ARM_DMA_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 3a32af4..a485ac3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -117,11 +117,12 @@
#endif
struct page;
+struct vm_area_struct;
struct cpu_user_fns {
void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
};
#ifdef MULTI_USER
@@ -137,7 +138,7 @@
extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
#endif
#define clear_user_highpage(page,vaddr) \
@@ -145,7 +146,7 @@
#define __HAVE_ARCH_COPY_USER_HIGHPAGE
#define copy_user_highpage(to,from,vaddr,vma) \
- __cpu_copy_user_highpage(to, from, vaddr)
+ __cpu_copy_user_highpage(to, from, vaddr, vma)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index bbecccd..eec6e89 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -97,9 +97,15 @@
* stack during a system call. Note that sizeof(struct pt_regs)
* has to be a multiple of 8.
*/
+#ifndef __KERNEL__
struct pt_regs {
long uregs[18];
};
+#else /* __KERNEL__ */
+struct pt_regs {
+ unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
#define ARM_cpsr uregs[16]
#define ARM_pc uregs[15]
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index 59303e2..e621530 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -13,4 +13,9 @@
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
+static inline int cache_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c2f1605..e085e2c 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -529,7 +529,8 @@
* cache entries for the kernels virtual memory range are written
* back to the page.
*/
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep);
#endif
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 4e506d0..cf9cdaa 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -391,6 +391,7 @@
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
/*
* The following SWIs are ARM private.
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 4a88125..8835115 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
*/
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@@ -112,5 +113,9 @@
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+ BLANK();
+ DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
+ DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
+ DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
return 0;
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d2903e3..6c5cf36 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -957,9 +957,7 @@
#else
-#ifdef CONFIG_SMP
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
1: ldrex r3, [r2]
subs r3, r3, r0
strexeq r3, r1, [r2]
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 6730413..ba2adef 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -212,7 +212,8 @@
char buf[64];
printk("CPU: %d %s (%s %.*s)\n",
- smp_processor_id(), print_tainted(), init_utsname()->release,
+ raw_smp_processor_id(), print_tainted(),
+ init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
print_symbol("PC is at %s\n", instruction_pointer(regs));
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index a9b650d..077ecf4 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -236,6 +236,7 @@
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM355 EVM",
.ccdc = "DM355 CCDC",
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 289fe1b..b476395 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -192,7 +192,11 @@
.bus_delay = 0 /* usec */,
};
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+ return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
static unsigned short dm365evm_keymap[] = {
KEY_KP2,
KEY_LEFT,
@@ -214,6 +218,7 @@
};
static struct davinci_ks_platform_data dm365evm_ks_data = {
+ .device_enable = dm365evm_keyscan_enable,
.keymap = dm365evm_keymap,
.keymapsize = ARRAY_SIZE(dm365evm_keymap),
.rep = 1,
@@ -222,7 +227,6 @@
.interval = 0x2,
.matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
};
-#endif
static int cpld_mmc_get_cd(int module)
{
@@ -511,10 +515,7 @@
dm365_init_asp(&dm365_evm_snd_data);
dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
dm365_init_ks(&dm365evm_ks_data);
-#endif
}
static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index fd0398b..e9612cf 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -247,6 +247,7 @@
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .i2c_adapter_id = 1,
.sub_devs = vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 52b287c..37311d1 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -81,12 +81,23 @@
return 0;
}
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+ return 0;
+}
+
static struct irq_chip cp_intc_irq_chip = {
.name = "cp_intc",
.ack = cp_intc_ack_irq,
.mask = cp_intc_mask_irq,
.unmask = cp_intc_unmask_irq,
.set_type = cp_intc_set_irq_type,
+ .set_wake = cp_intc_set_wake,
};
void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index dd2d32c..a5105f0 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -481,11 +481,18 @@
int da8xx_register_rtc(void)
{
+ int ret;
+
/* Unlock the rtc's registers */
__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
- return platform_device_register(&da8xx_rtc_device);
+ ret = platform_device_register(&da8xx_rtc_device);
+ if (!ret)
+ /* Atleast on DA850, RTC is a wakeup source */
+ device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+ return ret;
}
static struct resource da8xx_cpuidle_resources[] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 2ec619e..f53735c 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -993,7 +993,6 @@
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
{
- davinci_cfg_reg(DM365_KEYSCAN);
dm365_ks_device.dev.platform_data = pdata;
platform_device_register(&dm365_ks_device);
}
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
index b4e21a2..7a560e0 100644
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -29,6 +29,7 @@
};
struct davinci_ks_platform_data {
+ int (*device_enable)(struct device *dev);
unsigned short *keymap;
u32 keymapsize;
u8 rep:1;
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 9167c3d..3a08b18 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -161,6 +161,20 @@
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
+config MACH_SIM_ONE
+ bool "Support Simplemachines Sim.One board"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+ bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the Bluewater
+ Systems Snapper CL15 Module.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index eae6199..33ee2c8 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -10,4 +10,6 @@
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
+obj-$(CONFIG_MACH_SIM_ONE) += simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 1d0f9d8..49fa9f8 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -10,6 +10,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -447,30 +449,34 @@
u32 value;
int i;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
- if (!(value & 0x00800000)) { /* PLL1 bypassed? */
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
- } else {
+ else
clk_pll1.rate = calc_pll_rate(value);
- }
+
+ /* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
- if (!(value & 0x00080000)) { /* PLL2 bypassed? */
+ /* Determine the bootloader configured pll2 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
- } else if (value & 0x00040000) { /* PLL2 enabled? */
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
- } else {
+ else
clk_pll2.rate = 0;
- }
+
+ /* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
- printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+ pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
- printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+ pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1f0d665..90fb591 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -14,12 +14,15 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/timex.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@@ -35,7 +38,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@@ -82,13 +84,40 @@
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
-static unsigned int last_jiffy_time;
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+#define EP93XX_TIMER123_CLOCK 508469
+#define EP93XX_TIMER4_CLOCK 983040
+
+#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+static unsigned int last_jiffy_time;
+
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
+ /* Writing any value clears the timer interrupt */
__raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+ /* Recover lost jiffies */
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
@@ -107,13 +136,18 @@
static void __init ep93xx_timer_init(void)
{
+ u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+ EP93XX_TIMER123_CONTROL_CLKSEL;
+
/* Enable periodic HZ timer. */
- __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
- __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
- __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+ __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+ __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+ __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+ EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
- __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+ __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+ EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
@@ -135,237 +169,16 @@
/*************************************************************************
- * GPIO handling for EP93xx
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-
-void ep93xx_gpio_update_int_params(unsigned port)
-{
- BUG_ON(port > 2);
-
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
- __raw_writeb(gpio_int_type2[port],
- EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
- __raw_writeb(gpio_int_type1[port],
- EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
- EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (enable)
- gpio_int_debounce[port] |= port_mask;
- else
- gpio_int_debounce[port] &= ~port_mask;
-
- __raw_writeb(gpio_int_debounce[port],
- EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
-
-/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned char status;
- int i;
-
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- /*
- * map discontiguous hw irq range to continous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
- */
- int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
- generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(port);
- }
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
- gpio_int_unmasked[port] &= ~port_mask;
- ep93xx_gpio_update_int_params(port);
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
- ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] |= 1 << (line & 7);
- ep93xx_gpio_update_int_params(port);
-}
-
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- struct irq_desc *desc = irq_desc + irq;
- const int gpio = irq_to_gpio(irq);
- const int port = gpio >> 3;
- const int port_mask = 1 << (gpio & 7);
-
- gpio_direction_input(gpio);
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_int_type1[port] |= port_mask;
- /* set initial polarity based on current input level */
- if (gpio_get_value(gpio))
- gpio_int_type2[port] &= ~port_mask; /* falling */
- else
- gpio_int_type2[port] |= port_mask; /* rising */
- desc->handle_irq = handle_edge_irq;
- break;
- default:
- pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
- type, gpio);
- return -EINVAL;
- }
-
- gpio_int_enabled[port] |= port_mask;
-
- desc->status &= ~IRQ_TYPE_SENSE_MASK;
- desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
- ep93xx_gpio_update_int_params(port);
-
- return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
- .name = "GPIO",
- .ack = ep93xx_gpio_irq_ack,
- .mask_ack = ep93xx_gpio_irq_mask_ack,
- .mask = ep93xx_gpio_irq_mask,
- .unmask = ep93xx_gpio_irq_unmask,
- .set_type = ep93xx_gpio_irq_type,
-};
-
+extern void ep93xx_gpio_init_irq(void);
void __init ep93xx_init_irq(void)
{
- int gpio_irq;
-
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
- for (gpio_irq = gpio_to_irq(0);
- gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
- set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(gpio_irq, handle_level_irq);
- set_irq_flags(gpio_irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+ ep93xx_gpio_init_irq();
}
@@ -572,9 +385,9 @@
* CMOS driver.
*/
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
- pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ pr_warning("sda != EEDAT, open drain has no effect\n");
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
- pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+ pr_warning("scl != EECLK, open drain has no effect\n");
__raw_writel((data->sda_is_open_drain << 1) |
(data->scl_is_open_drain << 0),
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index dbcac9c..8904ca4 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -28,6 +28,8 @@
* with this implementation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -173,7 +175,7 @@
switch (m2p_channel_state(ch)) {
case STATE_IDLE:
- pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ pr_crit("dma interrupt without a dma buffer\n");
BUG();
break;
@@ -197,7 +199,7 @@
break;
case STATE_NEXT:
- pr_crit("m2p_irq: dma interrupt while next\n");
+ pr_crit("dma interrupt while next\n");
BUG();
break;
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index a4a7be3..d22d67a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -118,12 +118,33 @@
}
}
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+ if (machine_is_edb9301() ||
+ machine_is_edb9302() || machine_is_edb9302a()) {
+ /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+ ep93xx_register_pwm(0, 1);
+ } else if (machine_is_edb9307() || machine_is_edb9307a()) {
+ /* EP9307 only has pwm.0 (PWMOUT) */
+ ep93xx_register_pwm(1, 0);
+ } else {
+ /* EP9312 and EP9315 have both */
+ ep93xx_register_pwm(1, 1);
+ }
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_pwm();
}
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 1ea8871..cc377ae 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -13,6 +13,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
@@ -22,6 +24,235 @@
#include <mach/hardware.h>
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debounce[3];
+
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
+
+void ep93xx_gpio_update_int_params(unsigned port)
+{
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+void ep93xx_gpio_int_mask(unsigned line)
+{
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+}
+
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if (enable)
+ gpio_int_debounce[port] |= port_mask;
+ else
+ gpio_int_debounce[port] &= ~port_mask;
+
+ __raw_writeb(gpio_int_debounce[port],
+ EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned char status;
+ int i;
+
+ status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+
+ status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+}
+
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
+
+ generic_handle_irq(gpio_irq);
+}
+
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ ep93xx_gpio_update_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
+ ep93xx_gpio_update_int_params(port);
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ ep93xx_gpio_update_int_params(port);
+}
+
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ ep93xx_gpio_update_int_params(port);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ gpio_direction_input(gpio);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
+ return -EINVAL;
+ }
+
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ ep93xx_gpio_update_int_params(port);
+
+ return 0;
+}
+
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
+};
+
+void __init ep93xx_gpio_init_irq(void)
+{
+ int gpio_irq;
+
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+}
+
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
struct ep93xx_gpio_chip {
struct gpio_chip chip;
@@ -31,10 +262,6 @@
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-/* From core.c */
-extern void ep93xx_gpio_int_mask(unsigned line);
-extern void ep93xx_gpio_update_int_params(unsigned port);
-
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index d55194a..93e2ecc 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -92,21 +92,6 @@
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
@@ -167,8 +152,11 @@
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
+#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
new file mode 100644
index 0000000..cd93990
--- /dev/null
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the 2.6.24.7 support:
+ * Copyright (C) 2009 Simplemachines
+ * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data simone_flash_data = {
+ .width = 2,
+};
+
+static struct resource simone_flash_resource = {
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device simone_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &simone_flash_resource,
+ .dev = {
+ .platform_data = &simone_flash_data,
+ },
+};
+
+static struct ep93xx_eth_data simone_eth_data = {
+ .phy_id = 1,
+};
+
+static struct ep93xxfb_mach_info simone_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init simone_init_machine(void)
+{
+ ep93xx_init_devices();
+
+ platform_device_register(&simone_flash);
+ ep93xx_register_eth(&simone_eth_data, 1);
+ ep93xx_register_fb(&simone_fb_info);
+ ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+ ARRAY_SIZE(simone_i2c_board_info));
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = simone_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 0000000..51134b0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ * Andre Renaud <andre@bluewatersys.com>
+ * James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
+#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ static u16 nand_state = SNAPPERCL15_NAND_WPN;
+ u16 set;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+ if (ctrl & NAND_NCE)
+ set &= ~SNAPPERCL15_NAND_CEN;
+ if (ctrl & NAND_CLE)
+ set |= SNAPPERCL15_NAND_CLE;
+ if (ctrl & NAND_ALE)
+ set |= SNAPPERCL15_NAND_ALE;
+
+ nand_state &= ~(SNAPPERCL15_NAND_CEN |
+ SNAPPERCL15_NAND_CLE |
+ SNAPPERCL15_NAND_ALE);
+ nand_state |= set;
+ __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+ {
+ .name = "Kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .part_probe_types = snappercl15_nand_part_probes,
+ .partitions = snappercl15_nand_parts,
+ .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
+ .options = NAND_NO_AUTOINCR,
+ .chip_delay = 25,
+ },
+ .ctrl = {
+ .dev_ready = snappercl15_nand_dev_ready,
+ .cmd_ctrl = snappercl15_nand_cmd_ctrl,
+ },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+ {
+ .start = SNAPPERCL15_NAND_BASE,
+ .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device snappercl15_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &snappercl15_nand_data,
+ .resource = snappercl15_nand_resource,
+ .num_resources = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data snappercl15_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static struct ep93xxfb_mach_info snappercl15_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&snappercl15_eth_data, 1);
+ ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+ ARRAY_SIZE(snappercl15_i2c_data));
+ ep93xx_register_fb(&snappercl15_fb_info);
+ platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+ /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = snappercl15_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3bbf40f..71728d3 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -427,6 +427,17 @@
}
/*
+ * sched_clock()
+ */
+unsigned long long sched_clock(void)
+{
+ cycle_t cyc = ixp4xx_get_cycles(NULL);
+ struct clocksource *cs = &clocksource_ixp4xx;
+
+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
* clockevents
*/
static int ixp4xx_set_next_event(unsigned long evt,
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index fcaf876..0651f96 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -10,6 +10,8 @@
#include <mach/hardware.h>
#include <mach/clocks.h>
#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
struct module;
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8f49b2b..b22dec4 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -24,8 +24,6 @@
#include "common.h"
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
index 03dbbdc..8bcc1a5 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -58,21 +58,6 @@
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
PE11_PF_UART3_RTS,
- /* UART3 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
- /* UART4 */
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS,
- /* UART5 */
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
},
};
@@ -278,9 +257,6 @@
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
- mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
- mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index ef26951..6e838b8 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -173,6 +173,7 @@
DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -204,6 +205,7 @@
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
int __init mx25_clocks_init(unsigned long fref)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 63511de..9fdeea1 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -419,3 +419,22 @@
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
+static struct resource mx25_fec_resources[] = {
+ {
+ .start = MX25_FEC_BASE_ADDR,
+ .end = MX25_FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX25_INT_FEC,
+ .end = MX25_INT_FEC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mx25_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mx25_fec_resources),
+ .resource = mx25_fec_resources,
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe6bf88..fe5420f 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -17,3 +17,4 @@
extern struct platform_device mxc_i2c_device0;
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index d23ae57..921bc99 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -18,10 +18,11 @@
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
@@ -35,16 +36,57 @@
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
+static struct pad_desc mx25pdk_pads[] = {
+ MX25_PAD_FEC_MDC__FEC_MDC,
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+ MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO 35
+#define FEC_RESET_B_GPIO 104
+
+static void __init mx25pdk_fec_reset(void)
+{
+ gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+ gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+ gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
+ gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+ udelay(2);
+
+ /* turn on PHY power and lift reset */
+ gpio_set_value(FEC_ENABLE_GPIO, 1);
+ gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
static void __init mx25pdk_init(void)
{
+ mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+ ARRAY_SIZE(mx25pdk_pads));
+
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
+
+ mx25pdk_fec_reset();
+ mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
}
static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ea8ed10..2829441 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -49,6 +49,7 @@
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@@ -63,7 +64,7 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
- select MXC_ULPI
+ select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index bedf5b8..6858a4f 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -65,6 +65,11 @@
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED
},
};
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 0497c15..3e7bafa 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -494,11 +494,6 @@
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index def6b67..789b20d 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -135,6 +135,7 @@
* USB
*/
+#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -180,6 +181,7 @@
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
+#endif
/*
* NOR flash
@@ -212,11 +214,6 @@
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
@@ -261,11 +258,13 @@
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
+#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 8fc624f..438428e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -179,7 +179,7 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+ return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 85184a3..1f44b9c 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -294,7 +294,7 @@
usbh1_pdata.otg = otg;
- return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+ return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b705291..cfd605d 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -346,6 +346,8 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
+#if defined(CONFIG_USB_ULPI)
+
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
- return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+ return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
static struct gpio_led mx31moboard_leds[] = {
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 0f7a2f0..18715f1 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -211,11 +211,6 @@
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED,
- }, {
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6cbaabe..5be3969 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -322,16 +322,25 @@
return 0;
}
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
+ }, {
+ I2C_BOARD_INFO("mt9v022", 0x48),
},
};
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm037_i2c_camera[1],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
- .board_info = &pcm037_i2c_2_devices[0],
+ .board_info = &pcm037_i2c_camera[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
@@ -345,11 +354,19 @@
}
};
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
- .platform_data = &iclink,
+ .platform_data = &iclink_mt9t031,
+ },
+};
+
+static struct platform_device pcm037_mt9v022 = {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink_mt9v022,
},
};
@@ -449,7 +466,8 @@
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
- &pcm037_camera,
+ &pcm037_mt9t031,
+ &pcm037_mt9v022,
};
static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
- iclink.power = NULL;
+ iclink_mt9t031.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
new file mode 100644
index 0000000..2bc40a2
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_NUC93X
+
+config CPU_NUC932
+ bool
+ help
+ Support for NUC932 of Nuvoton NUC93X CPUs.
+
+menu "NUC932 Machines"
+
+config MACH_NUC932EVB
+ bool "Nuvoton NUC932 Evaluation Board"
+ default y
+ select CPU_NUC932
+ help
+ Say Y here if you are using the Nuvoton NUC932EVB
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
new file mode 100644
index 0000000..440e2de
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o dev.o cpu.o clock.o
+# NUC932 CPU support files
+
+obj-$(CONFIG_CPU_NUC932) += nuc932.o
+
+# machine support
+
+obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
new file mode 100644
index 0000000..a057b54
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
new file mode 100644
index 0000000..0521efb
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 27000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc93x_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(NUC93X_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, NUC93X_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
new file mode 100644
index 0000000..18e51be
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void nuc93x_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc93x_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
new file mode 100644
index 0000000..f6ff5d8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-nuc93x/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC93x series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc93x_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial nuc932 clock declarations. */
+static DEFINE_CLK(audio, 2);
+static DEFINE_CLK(sd, 3);
+static DEFINE_CLK(jpg, 4);
+static DEFINE_CLK(video, 5);
+static DEFINE_CLK(vpost, 6);
+static DEFINE_CLK(2d, 7);
+static DEFINE_CLK(gpu, 8);
+static DEFINE_CLK(gdma, 9);
+static DEFINE_CLK(adc, 10);
+static DEFINE_CLK(uart, 11);
+static DEFINE_CLK(spi, 12);
+static DEFINE_CLK(pwm, 13);
+static DEFINE_CLK(timer, 14);
+static DEFINE_CLK(wdt, 15);
+static DEFINE_CLK(ac97, 16);
+static DEFINE_CLK(i2s, 16);
+static DEFINE_CLK(usbck, 17);
+static DEFINE_CLK(usb48, 18);
+static DEFINE_CLK(usbh, 19);
+static DEFINE_CLK(i2c, 20);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc932_clkregs[] = {
+ DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
+ DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
+ DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
+ DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
+ DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
+ DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
+ DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
+ DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
+ DEF_CLKLOOK(&clk_uart, NULL, "uart"),
+ DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
+ DEF_CLKLOOK(&clk_timer, NULL, "timer"),
+ DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
+ DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
+ DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
+ DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
+ DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
+ DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc93x_uart_data[] = {
+ NUC93X_8250PORT(UART0),
+ {},
+};
+
+struct platform_device nuc93x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc93x_uart_data,
+ },
+};
+
+/*Init NUC93x evb io*/
+
+void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
+
+ idcode = __raw_readl(NUC93XPDID);
+ if (idcode == NUC932_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else
+ printk(KERN_ERR "CPU type detect error!\n");
+
+}
+
+/*Init NUC93x clock*/
+
+void __init nuc93x_init_clocks(void)
+{
+ clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
+}
+
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
new file mode 100644
index 0000000..9def28197
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-nuc93x/cpu.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for NUC93X CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)NUC93X_VA_##y, \
+ .pfn = __phys_to_pfn(NUC93X_PA_##y), \
+ .length = NUC93X_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+#define NUC93X_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 57139200, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+}
+
+/*Cpu identifier register*/
+
+#define NUC93XPDID NUC93X_VA_GCR
+#define NUC932_CPUID 0x29550091
+
+/* extern file from cpu.c */
+
+extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
+extern void nuc93x_init_clocks(void);
+extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc93x_board_init(struct platform_device **device, int size);
+extern struct platform_device nuc93x_serial_device;
+
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
new file mode 100644
index 0000000..a962ae9
--- /dev/null
+++ b/arch/arm/mach-nuc93x/dev.c
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/arm/mach-nuc93x/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include "cpu.h"
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc93x_public_dev[] __initdata = {
+ &nuc93x_serial_device,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc93x_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
new file mode 100644
index 0000000..1352cbd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/entry-macro.S
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
new file mode 100644
index 0000000..fb5c6fc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
new file mode 100644
index 0000000..72e5051
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
new file mode 100644
index 0000000..7c4aa71
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/irqs.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NUC93X_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT NUC93X_IRQ(1)
+#define IRQ_IRQ0 NUC93X_IRQ(2)
+#define IRQ_IRQ1 NUC93X_IRQ(3)
+#define IRQ_IRQ2 NUC93X_IRQ(4)
+#define IRQ_IRQ3 NUC93X_IRQ(5)
+#define IRQ_USBH NUC93X_IRQ(6)
+#define IRQ_APU NUC93X_IRQ(7)
+#define IRQ_VPOST NUC93X_IRQ(8)
+#define IRQ_ADC NUC93X_IRQ(9)
+#define IRQ_UART0 NUC93X_IRQ(10)
+#define IRQ_TIMER0 NUC93X_IRQ(11)
+#define IRQ_GPU0 NUC93X_IRQ(12)
+#define IRQ_GPU1 NUC93X_IRQ(13)
+#define IRQ_GPU2 NUC93X_IRQ(14)
+#define IRQ_GPU3 NUC93X_IRQ(15)
+#define IRQ_GPU4 NUC93X_IRQ(16)
+#define IRQ_VIN NUC93X_IRQ(17)
+#define IRQ_USBD NUC93X_IRQ(18)
+#define IRQ_VRAMLD NUC93X_IRQ(19)
+#define IRQ_GDMA0 NUC93X_IRQ(20)
+#define IRQ_GDMA1 NUC93X_IRQ(21)
+#define IRQ_SDIO NUC93X_IRQ(22)
+#define IRQ_FMI NUC93X_IRQ(22)
+#define IRQ_JPEG NUC93X_IRQ(23)
+#define IRQ_SPI0 NUC93X_IRQ(24)
+#define IRQ_SPI1 NUC93X_IRQ(25)
+#define IRQ_RTC NUC93X_IRQ(26)
+#define IRQ_PWM0 NUC93X_IRQ(27)
+#define IRQ_PWM1 NUC93X_IRQ(28)
+#define IRQ_PWM2 NUC93X_IRQ(29)
+#define IRQ_PWM3 NUC93X_IRQ(30)
+#define IRQ_I2SAC97 NUC93X_IRQ(31)
+#define IRQ_CAP0 IRQ_PWM0
+#define IRQ_CAP1 IRQ_PWM1
+#define IRQ_CAP2 IRQ_PWM2
+#define IRQ_CAP3 IRQ_PWM3
+#define NR_IRQS (IRQ_I2SAC97 + 1)
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
new file mode 100644
index 0000000..fd0b5e8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/map.h
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#define MAP_OFFSET (0xfff00000)
+#define CLK_OFFSET (0x10)
+
+#ifndef __ASSEMBLY__
+#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
+#else
+#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
+#endif
+
+ /*
+ * nuc932 hardware register definition
+ */
+
+#define NUC93X_PA_IRQ (0xFFF83000)
+#define NUC93X_PA_GCR (0xFFF00000)
+#define NUC93X_PA_EBI (0xFFF01000)
+#define NUC93X_PA_UART (0xFFF80000)
+#define NUC93X_PA_TIMER (0xFFF81000)
+#define NUC93X_PA_GPIO (0xFFF84000)
+#define NUC93X_PA_GDMA (0xFFF03000)
+#define NUC93X_PA_USBHOST (0xFFF0d000)
+#define NUC93X_PA_I2C (0xFFF89000)
+#define NUC93X_PA_LCD (0xFFF06000)
+#define NUC93X_PA_GE (0xFFF05000)
+#define NUC93X_PA_ADC (0xFFF85000)
+#define NUC93X_PA_RTC (0xFFF87000)
+#define NUC93X_PA_PWM (0xFFF82000)
+#define NUC93X_PA_ACTL (0xFFF0a000)
+#define NUC93X_PA_USBDEV (0xFFF0C000)
+#define NUC93X_PA_JEPEG (0xFFF0e000)
+#define NUC93X_PA_CACHE_T (0xFFF60000)
+#define NUC93X_PA_VRAM (0xFFF0b000)
+#define NUC93X_PA_DMAC (0xFFF09000)
+#define NUC93X_PA_I2SM (0xFFF08000)
+#define NUC93X_PA_CACHE (0xFFF02000)
+#define NUC93X_PA_GPU (0xFFF04000)
+#define NUC93X_PA_VIDEOIN (0xFFF07000)
+#define NUC93X_PA_SPI0 (0xFFF86000)
+#define NUC93X_PA_SPI1 (0xFFF88000)
+
+ /*
+ * nuc932 virtual address mapping.
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
+#define NUC93X_SZ_IRQ SZ_4K
+
+#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
+#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
+#define NUC93X_SZ_GCR SZ_4K
+
+/* EBI management */
+
+#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
+#define NUC93X_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
+#define NUC93X_SZ_UART SZ_4K
+
+/* Timers */
+
+#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
+#define NUC93X_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
+#define NUC93X_SZ_GPIO SZ_4K
+
+/* GDMA control */
+
+#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
+#define NUC93X_SZ_GDMA SZ_4K
+
+/* I2C hardware controller */
+
+#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
+#define NUC93X_SZ_I2C SZ_4K
+
+/* LCD controller*/
+
+#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
+#define NUC93X_SZ_LCD SZ_4K
+
+/* 2D controller*/
+
+#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
+#define NUC93X_SZ_GE SZ_4K
+
+/* ADC */
+
+#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
+#define NUC93X_SZ_ADC SZ_4K
+
+/* RTC */
+
+#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
+#define NUC93X_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+
+#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
+#define NUC93X_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+
+#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
+#define NUC93X_SZ_ACTL SZ_4K
+
+/* USB Device port */
+
+#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
+#define NUC93X_SZ_USBDEV SZ_4K
+
+/* USB host controller*/
+#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
+#define NUC93X_SZ_USBHOST SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
new file mode 100644
index 0000000..323ab0d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/memory.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
new file mode 100644
index 0000000..5cb2954
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA NUC93X_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
new file mode 100644
index 0000000..3c72550
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA NUC93X_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
new file mode 100644
index 0000000..2302159
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA NUC93X_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
new file mode 100644
index 0000000..767a047
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA NUC93X_VA_UART
+#define UART1_BA (NUC93X_VA_UART+0x100)
+
+#define UART0_PA NUC93X_PA_UART
+#define UART1_PA (NUC93X_PA_UART+0x100)
+
+
+#ifndef __ASSEMBLY__
+
+struct nuc93x_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct nuc93x_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct nuc93x_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
new file mode 100644
index 0000000..394be96
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA NUC93X_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
new file mode 100644
index 0000000..d26bd9a
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/machnuc93x/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ cpu_reset(0);
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
new file mode 100644
index 0000000..0c719cc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
new file mode 100644
index 0000000..73082cd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+#include <linux/serial_reg.h>
+
+#define arch_decomp_wdog()
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+static u32 * uart_base = (u32 *)UART0_PA;
+
+static void putc(int ch)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+
+ *uart_base = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
new file mode 100644
index 0000000..98a21b8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
new file mode 100644
index 0000000..a7a88ea
--- /dev/null
+++ b/arch/arm/mach-nuc93x/irq.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-nuc93x/irq.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void nuc93x_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void nuc93x_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void nuc93x_irq_unmask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MECR);
+
+}
+
+static struct irq_chip nuc93x_irq_chip = {
+ .ack = nuc93x_irq_ack,
+ .mask = nuc93x_irq_mask,
+ .unmask = nuc93x_irq_unmask,
+};
+
+void __init nuc93x_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
+ set_irq_chip(irqno, &nuc93x_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
new file mode 100644
index 0000000..9f79266
--- /dev/null
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc932.h"
+
+static void __init nuc932evb_map_io(void)
+{
+ nuc932_map_io();
+ nuc932_init_clocks();
+ nuc932_init_uartclk();
+}
+
+static void __init nuc932evb_init(void)
+{
+ nuc932_board_init();
+}
+
+MACHINE_START(NUC932EVB, "NUC932EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = NUC93X_PA_UART,
+ .io_pg_offst = (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc932evb_map_io,
+ .init_irq = nuc93x_init_irq,
+ .init_machine = nuc932evb_init,
+ .timer = &nuc93x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
new file mode 100644
index 0000000..3966ead
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-nuc93x/nuc932.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC932 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc932_dev[] __initdata = {
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc932evb_iodesc[] __initdata = {
+};
+
+/*Init NUC932 evb io*/
+
+void __init nuc932_map_io(void)
+{
+ nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
+}
+
+/*Init NUC932 clock*/
+
+void __init nuc932_init_clocks(void)
+{
+ nuc93x_init_clocks();
+}
+
+/*enable NUC932 uart clock*/
+
+void __init nuc932_init_uartclk(void)
+{
+ struct clk *ck_uart = clk_get(NULL, "uart");
+ BUG_ON(IS_ERR(ck_uart));
+
+ clk_enable(ck_uart);
+}
+
+/*Init NUC932 board info*/
+
+void __init nuc932_board_init(void)
+{
+ nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
+}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
new file mode 100644
index 0000000..9a66edd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-nuc93x/nuc932.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC93x CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc93x_init_irq(void);
+extern struct sys_timer nuc93x_timer;
+
+/* extern file from nuc932.c */
+
+extern void nuc932_board_init(void);
+extern void nuc932_init_clocks(void);
+extern void nuc932_map_io(void);
+extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
new file mode 100644
index 0000000..2f90f9d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/time.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-nuc93x/time.c
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define RESETINT 0x01
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static unsigned long nuc93x_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction nuc93x_timer_irq = {
+ .name = "nuc93x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = nuc93x_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void nuc93x_timer_setup(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ struct clk *ck_timer = clk_get(NULL, "timer");
+ unsigned int rate, val = 0;
+
+ BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
+
+ clk_enable(ck_timer);
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(RESETINT, REG_TISR);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+ __raw_writel(timer0_load, REG_TICR0);
+
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ __raw_writel(val, REG_TCSR0);
+
+}
+
+static void __init nuc93x_timer_init(void)
+{
+ nuc93x_timer_setup();
+ setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
+}
+
+struct sys_timer nuc93x_timer = {
+ .init = nuc93x_timer_init,
+ .offset = nuc93x_gettimeoffset,
+ .resume = nuc93x_timer_setup
+};
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index ab995a9..65e7b5b 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -599,7 +599,7 @@
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
- CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
@@ -627,7 +627,7 @@
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
- CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
@@ -658,6 +658,10 @@
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
+ CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
@@ -674,7 +678,7 @@
* init
*/
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 23ded2d..a2d07aa 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@@ -23,6 +24,7 @@
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
@@ -196,6 +198,38 @@
/*-------------------------------------------------------------------------*/
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+ .name = "omap1_spi100k",
+ .id = 1,
+};
+
+struct platform_device omap_spi2 = {
+ .name = "omap1_spi100k",
+ .id = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+ omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+ if (omap_spi1.dev.platform_data)
+ platform_device_register(&omap_spi1);
+
+ omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+ if (omap_spi2.dev.platform_data)
+ platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
@@ -263,6 +297,7 @@
omap_init_mbox();
omap_init_rtc();
+ omap_init_spi100k();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 07212cc..8434137 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -62,6 +62,14 @@
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
+MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
+MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
+MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
+MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
+MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 10eafa7..606bf04 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -80,6 +80,7 @@
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 8dd277c..1e3dfb6 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -63,21 +63,21 @@
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
+ KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
- KEY(5, 7, KEY_ENTER),
+ KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
- KEY(6, 7, KEY_SELECT),
+ KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
- KEY(7, 5, KEY_RIGHT),
- KEY(7, 6, KEY_UP),
+ KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index d0e3fb7..5420356 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -449,18 +449,56 @@
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
*/
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
- struct prcm_config *prcm;
+ const struct prcm_config *prcm;
+ long sys_ck_rate;
int i = 0;
+ int tbl_sz = 0;
+
+ sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck.rate)
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ tbl_sz++;
+ }
+
+ /*
+ * XXX Ensure that we're doing what CPUFreq expects for this error
+ * case and the following one
+ */
+ if (tbl_sz == 0) {
+ pr_warning("%s: no matching entries in rate_table\n",
+ __func__);
+ return;
+ }
+
+ /* Include the CPUFREQ_TABLE_END terminator entry */
+ tbl_sz++;
+
+ freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+ GFP_ATOMIC);
+ if (!freq_table) {
+ pr_err("%s: could not kzalloc frequency table\n", __func__);
+ return;
+ }
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
@@ -472,17 +510,17 @@
i++;
}
- if (i == 0) {
- printk(KERN_WARNING "%s: failed to initialize frequency "
- "table\n", __func__);
- return;
- }
-
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ kfree(freq_table);
+}
+
#endif
struct clk_functions omap2_clk_functions = {
@@ -494,6 +532,7 @@
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+ .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ded3236..d4217b9 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -34,7 +34,6 @@
#include <asm/div64.h>
#include <asm/clkdev.h>
-#include <plat/sdrc.h>
#include "clock.h"
#include "clock34xx.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 8bdcc9c..c6031d7 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -776,6 +776,8 @@
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
.recalc = &omap2_clksel_recalc,
};
@@ -1500,6 +1502,7 @@
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1509,6 +1512,7 @@
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -2745,7 +2749,7 @@
};
static const struct clksel mcbsp_234_clksel[] = {
- { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+ { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
{ .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 1a45ed1..dd285f0 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -559,7 +559,7 @@
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -610,7 +610,7 @@
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
#ifdef DEBUG
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a8749e8..5a79964 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
-#include <plat/mux.h>
#include <plat/vram.h>
#include "clock.h"
@@ -73,21 +72,21 @@
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = DSP_MEM_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
+ .length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = DSP_IPI_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
+ .length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = DSP_MMU_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
+ .length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index e071b3f..459ef23 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -994,8 +994,10 @@
}
#ifdef CONFIG_OMAP_MUX
- omap_mux_package_fixup(package_subset, superset);
- omap_mux_package_init_balls(package_balls, superset);
+ if (package_subset)
+ omap_mux_package_fixup(package_subset, superset);
+ if (package_balls)
+ omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
#endif
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 126a939..e6dda69 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -9,45 +9,47 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips. Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available. There are quite a
+ * few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index edb8167..1b9596a 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -1,5 +1,5 @@
/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available. There are
+ * quite a few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 81ed252..c6cc809 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -124,8 +124,8 @@
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
- while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE)
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
;
/* Save the Interrupt controller context */
omap_intc_save_context();
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 19805a7..8c964be 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -125,6 +125,13 @@
}
};
#endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@@ -583,11 +590,12 @@
{
if (UART_RX == offset) {
unsigned int lsr;
- lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+ lsr = __serial_read_reg(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
return -EPERM;
}
- return serial_read_reg(omap_uart[up->line].p, offset);
+
+ return __serial_read_reg(up, offset);
}
void __init omap_serial_early_init(void)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8a0837e..dee9218 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -37,6 +37,8 @@
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
+ select CPU_PXA300
+ select CPU_PXA310
select PXA_SSP
config MACH_TAVOREVB
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 50f1297..e741bf1 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -250,20 +250,17 @@
#define cpu_is_pxa930() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa930(id); \
+ __cpu_is_pxa930(read_cpuid_id()); \
})
#define cpu_is_pxa935() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa935(id); \
+ __cpu_is_pxa935(read_cpuid_id()); \
})
#define cpu_is_pxa950() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa950(id); \
+ __cpu_is_pxa950(read_cpuid_id()); \
})
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index bf6785a..9edf645 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -8,13 +8,6 @@
/* the following variables are processor specific and initialized
* by the corresponding zylonite_pxa3xx_init()
*/
-struct platform_mmc_slot {
- int gpio_cd;
- int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
extern int gpio_eth_irq;
extern int gpio_debug_led1;
extern int gpio_debug_led2;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index f28c171..fa527b2 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -110,6 +110,12 @@
GPIO7_MMC1_CLK,
GPIO8_MMC1_CMD,
GPIO15_GPIO, /* card detect */
+
+ /* UART3 */
+ GPIO107_UART3_CTS,
+ GPIO108_UART3_RTS,
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD,
};
static struct resource smc91x_resources[] = {
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 8a38d60..189f330 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -381,7 +381,7 @@
return ret;
}
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 5914021..e100af7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -270,7 +270,7 @@
return ret;
}
-static int palmld_backlight_notify(int brightness)
+static int palmld_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 7f89ca2..8fe3ec2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -209,7 +209,7 @@
return ret;
}
-static int palmt5_backlight_notify(int brightness)
+static int palmt5_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 3084175..b992f07 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -185,7 +185,7 @@
return ret;
}
-static int palmtc_backlight_notify(int brightness)
+static int palmtc_backlight_notify(struct device *dev, int brightness)
{
/* backlight is on when GPIO16 AF0 is high */
gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 265d62b..dc728d6 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -181,7 +181,7 @@
return ret;
}
-static int palmte2_backlight_notify(int brightness)
+static int palmte2_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 606eb7e..b433bb4 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -375,7 +375,7 @@
return ret;
}
-static int treo_backlight_notify(int brightness)
+static int treo_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
return TREO_MAX_INTENSITY - brightness;
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 7bf18c2..b37a025 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -269,7 +269,7 @@
return ret;
}
-static int palmtx_backlight_notify(int brightness)
+static int palmtx_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index d787ac7..1c5d68a 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -196,7 +196,7 @@
return ret;
}
-static int palmz72_backlight_notify(int brightness)
+static int palmz72_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index e5eeb3a..c2b938a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -293,7 +293,7 @@
.init = poodle_mci_init,
.setpower = poodle_mci_setpower,
.exit = poodle_mci_exit,
- .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT,
+ .gpio_card_detect = POODLE_GPIO_nSD_DETECT,
.gpio_card_ro = POODLE_GPIO_nSD_WP,
.gpio_power = -1,
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4b50f14..28352c0 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -389,13 +389,13 @@
.type = EV_SW,
.code = 0,
.gpio = SPITZ_GPIO_SWA,
- .desc = "Display Down",
+ .desc = "Display Down",
},
{
.type = EV_SW,
.code = 1,
.gpio = SPITZ_GPIO_SWB,
- .desc = "Lid Closed",
+ .desc = "Lid Closed",
},
};
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 5352b4e..89f258c 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -379,7 +379,7 @@
return ret;
}
-static int viper_backlight_notify(int brightness)
+static int viper_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 5b986a8..75f2a37 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -25,6 +25,7 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -626,8 +627,27 @@
pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
}
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
- unsigned ngpio, void *context)
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+ /* Power supply is always present */
+ info->ac_line_status = APM_AC_ONLINE;
+ info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+ apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+ unsigned ngpio, void *context)
{
int i;
u8 pcb_info = 0;
@@ -726,9 +746,18 @@
GPIO99_GPIO, /* CF RDY */
};
+/*
+ * DM9k MSCx settings: SRAM, 16 bits
+ * 17 cycles delay first access
+ * 5 cycles delay next access
+ * 13 cycles recovery time
+ * faster device
+ */
+#define DM9K_MSC_VALUE 0xe4c9
+
static void __init zeus_init(void)
{
- u16 dm9000_msc = 0xe279;
+ u16 dm9000_msc = DM9K_MSC_VALUE;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
@@ -738,6 +767,7 @@
MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
pm_power_off = zeus_power_off;
+ zeus_setup_apm();
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index b66e9e2..2b4043c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -36,9 +36,6 @@
#include "devices.h"
#include "generic.h"
-#define MAX_SLOTS 3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
int gpio_eth_irq;
int gpio_debug_led1;
int gpio_debug_led2;
@@ -220,84 +217,28 @@
#endif
#if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
-
- return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
- irq_handler_t zylonite_detect_int,
- void *data)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int err, cd_irq, gpio_cd, gpio_wp;
-
- cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
- gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
- gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
- /*
- * setup GPIO for Zylonite MMC controller
- */
- err = gpio_request(gpio_cd, "mmc card detect");
- if (err)
- goto err_request_cd;
- gpio_direction_input(gpio_cd);
-
- err = gpio_request(gpio_wp, "mmc write protect");
- if (err)
- goto err_request_wp;
- gpio_direction_input(gpio_wp);
-
- err = request_irq(cd_irq, zylonite_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: MMC/SD/SDIO: "
- "can't request card detect IRQ\n", __func__);
- goto err_request_irq;
- }
-
- return 0;
-
-err_request_irq:
- gpio_free(gpio_wp);
-err_request_wp:
- gpio_free(gpio_cd);
-err_request_cd:
- return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int cd_irq, gpio_cd, gpio_wp;
-
- cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
- gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
- gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
- free_irq(cd_irq, data);
- gpio_free(gpio_cd);
- gpio_free(gpio_wp);
-}
-
static struct pxamci_platform_data zylonite_mci_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = zylonite_mci_init,
- .exit = zylonite_mci_exit,
- .get_ro = zylonite_mci_ro,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
+ .gpio_card_detect = EXT_GPIO(0),
+ .gpio_card_ro = EXT_GPIO(2),
.gpio_power = -1,
};
static struct pxamci_platform_data zylonite_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(1),
+ .gpio_card_ro = EXT_GPIO(3),
+ .gpio_power = -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(30),
+ .gpio_card_ro = EXT_GPIO(31),
+ .gpio_power = -1,
};
static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@
pxa_set_mci_info(&zylonite_mci_platform_data);
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
if (cpu_is_pxa310())
- pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+ pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
}
#else
static inline void zylonite_init_mmc(void) {}
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 8409544..3aa73b3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -129,8 +129,8 @@
GPIO22_I2C_SDA,
/* GPIO */
- GPIO18_GPIO, /* GPIO Expander #0 INT_N */
- GPIO19_GPIO, /* GPIO Expander #1 INT_N */
+ GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@
/* detect LCD panel */
zylonite_detect_lcd_panel();
- /* MMC card detect & write protect for controller 0 */
- zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
- zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
-
/* WM9713 IRQ */
wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
@@ -276,10 +272,6 @@
if (cpu_is_pxa310()) {
pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
- /* MMC card detect & write protect for controller 2 */
- zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
- zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
}
/* GPIOs for Debug LEDs */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 60d08f2..9942bac 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -209,10 +209,6 @@
gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
- /* MMC card detect & write protect for controller 0 */
- zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1);
- zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5);
-
/* WM9713 IRQ */
wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
}
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 34b80b7..2f5ccb2 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -74,8 +74,8 @@
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
/*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
*/
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 4f46bf7..86c0c44 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -140,7 +140,7 @@
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */
/*
* REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 917f8ca..7d857d3 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -381,6 +381,20 @@
.init = realview_eb_timer_init,
};
+static void realview_eb_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ if (core_tile_eb11mp())
+ __raw_writel(0x0008, reset_ctrl);
+}
+
static void __init realview_eb_init(void)
{
int i;
@@ -408,6 +422,7 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_eb_reset;
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 7fb726d..44392e5 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -292,12 +292,10 @@
static void realview_pb1176_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_LOCK_OFFSET;
- __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
- __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
}
static void realview_pb1176_fixup(struct machine_desc *mdesc,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 9bbbfc0..3e02731 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -301,17 +301,16 @@
static void realview_pb11mp_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- unsigned int val;
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
- val = __raw_readl(hdr_ctrl);
- val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
- __raw_writel(val, hdr_ctrl);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
}
static void __init realview_pb11mp_init(void)
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index fe861e9..fe4e25c 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -272,6 +272,20 @@
.init = realview_pba8_timer_init,
};
+static void realview_pba8_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
+}
+
static void __init realview_pba8_init(void)
{
int i;
@@ -291,6 +305,7 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pba8_reset;
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ec39488..a21a4b3 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -324,6 +324,20 @@
#endif
}
+static void realview_pbx_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
+}
+
static void __init realview_pbx_init(void)
{
int i;
@@ -358,6 +372,7 @@
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 547d4fc..2068e90 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -288,7 +288,7 @@
/* DM9000AEP 10/100 ethernet controller */
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@
* | | +----+ +----+
* .....
*/
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
@@ -384,12 +384,12 @@
#endif
};
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
@@ -399,41 +399,41 @@
/* LEDS */
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
@@ -441,7 +441,7 @@
},
};
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
@@ -449,7 +449,7 @@
},
};
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
@@ -457,7 +457,7 @@
},
};
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
@@ -465,7 +465,7 @@
},
};
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
@@ -475,14 +475,14 @@
/* AUDIO */
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 480d297..8969fe7 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -211,6 +211,7 @@
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
+ .gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 111f7ea..36ffd6a 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -610,34 +610,34 @@
static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 18900000)
+ if (rate <= 18900000)
return 18900000;
- if (rate >= 20800000)
+ if (rate <= 20800000)
return 20800000;
- if (rate >= 23100000)
+ if (rate <= 23100000)
return 23100000;
- if (rate >= 26000000)
+ if (rate <= 26000000)
return 26000000;
- if (rate >= 29700000)
+ if (rate <= 29700000)
return 29700000;
- if (rate >= 34700000)
+ if (rate <= 34700000)
return 34700000;
- if (rate >= 41600000)
+ if (rate <= 41600000)
return 41600000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
return -EINVAL;
}
static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 13000000)
+ if (rate <= 13000000)
return 13000000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
- if (rate >= 104000000)
+ if (rate <= 104000000)
return 104000000;
- if (rate >= 208000000)
+ if (rate <= 208000000)
return 208000000;
return -EINVAL;
}
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..01b5031 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2010 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -19,6 +19,7 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <mach/coh901318.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -29,6 +30,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
+#include <mach/dma_channels.h>
#include "clock.h"
#include "mmc.h"
@@ -372,8 +374,1019 @@
},
};
+static struct resource dma_resource[] = {
+ {
+ .start = U300_DMAC_BASE,
+ .end = U300_DMAC_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_DMA,
+ .end = IRQ_U300_DMA,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+/* points out all dma slave channels.
+ * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
+ * Select all channels from A to B, end of list is marked with -1,-1
+ */
+static int dma_slave_channels[] = {
+ U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
+ U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
+
+/* points out all dma memcpy channels. */
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
+
+#else /* CONFIG_MACH_U300_BS335 */
+
+static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
+
+#endif
+
+/** register dma for memory access
+ *
+ * active 1 means dma intends to access memory
+ * 0 means dma wont access memory
+ */
+static void coh901318_access_memory_state(struct device *dev, bool active)
+{
+}
+
+#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
+ COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
+ COH901318_CX_CFG_LCR_DISABLE | \
+ COH901318_CX_CFG_TC_IRQ_ENABLE | \
+ COH901318_CX_CFG_BE_IRQ_ENABLE)
+#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_ENABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+
+const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
+ {
+ .number = U300_DMA_MSL_TX_0,
+ .name = "MSL TX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_1,
+ .name = "MSL TX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_2,
+ .name = "MSL TX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .desc_nbr_max = 10,
+ },
+ {
+ .number = U300_DMA_MSL_TX_3,
+ .name = "MSL TX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_4,
+ .name = "MSL TX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_5,
+ .name = "MSL TX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_6,
+ .name = "MSL TX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_RX_0,
+ .name = "MSL RX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MSL_RX_1,
+ .name = "MSL RX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_2,
+ .name = "MSL RX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_3,
+ .name = "MSL RX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_4,
+ .name = "MSL RX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_5,
+ .name = "MSL RX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_6,
+ .name = "MSL RX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MMCSD_RX_TX,
+ .name = "MMCSD RX TX",
+ .priority_high = 0,
+ .dev_addr = U300_MMCSD_BASE + 0x080,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+
+ },
+ {
+ .number = U300_DMA_MSPRO_TX,
+ .name = "MSPRO TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_MSPRO_RX,
+ .name = "MSPRO RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_TX,
+ .name = "UART0 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_RX,
+ .name = "UART0 RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_TX,
+ .name = "APEX TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_RX,
+ .name = "APEX RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_TX,
+ .name = "PCM I2S0 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_RX,
+ .name = "PCM I2S0 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_TX,
+ .name = "PCM I2S1 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_RX,
+ .name = "PCM I2S1 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_XGAM_CDI,
+ .name = "XGAM CDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_XGAM_PDI,
+ .name = "XGAM PDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_TX,
+ .name = "SPI TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_RX,
+ .name = "SPI RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_0,
+ .name = "GENERAL 00",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_1,
+ .name = "GENERAL 01",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_2,
+ .name = "GENERAL 02",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_3,
+ .name = "GENERAL 03",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_4,
+ .name = "GENERAL 04",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_5,
+ .name = "GENERAL 05",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_6,
+ .name = "GENERAL 06",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_7,
+ .name = "GENERAL 07",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_8,
+ .name = "GENERAL 08",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .number = U300_DMA_UART1_TX,
+ .name = "UART1 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART1_RX,
+ .name = "UART1 RX",
+ .priority_high = 0,
+ }
+#else
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_9,
+ .name = "GENERAL 09",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_10,
+ .name = "GENERAL 10",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ }
+#endif
+};
+
+
+static struct coh901318_platform coh901318_platform = {
+ .chans_slave = dma_slave_channels,
+ .chans_memcpy = dma_memcpy_channels,
+ .access_memory_state = coh901318_access_memory_state,
+ .chan_conf = chan_config,
+ .max_channels = U300_DMA_CHANNELS,
+};
+
static struct platform_device wdog_device = {
- .name = "wdog",
+ .name = "coh901327_wdog",
.id = -1,
.num_resources = ARRAY_SIZE(wdog_resources),
.resource = wdog_resources,
@@ -428,11 +1441,23 @@
.resource = ave_resources,
};
+static struct platform_device dma_device = {
+ .name = "coh901318",
+ .id = -1,
+ .resource = dma_resource,
+ .num_resources = ARRAY_SIZE(dma_resource),
+ .dev = {
+ .platform_data = &coh901318_platform,
+ .coherent_dma_mask = ~0,
+ },
+};
+
/*
* Notice that AMBA devices are initialized before platform devices.
*
*/
static struct platform_device *platform_devs[] __initdata = {
+ &dma_device,
&i2c0_device,
&i2c1_device,
&keypad_device,
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 0b35826..5f61fd4 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -546,7 +546,7 @@
for (i = 0; i < U300_GPIO_MAX; i++) {
val = 0;
for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+ val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
local_irq_save(flags);
writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
local_irq_restore(flags);
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h
new file mode 100644
index 0000000..b239149
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/dma_channels.h
@@ -0,0 +1,69 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0 0
+#define U300_DMA_MSL_TX_1 1
+#define U300_DMA_MSL_TX_2 2
+#define U300_DMA_MSL_TX_3 3
+#define U300_DMA_MSL_TX_4 4
+#define U300_DMA_MSL_TX_5 5
+#define U300_DMA_MSL_TX_6 6
+#define U300_DMA_MSL_RX_0 7
+#define U300_DMA_MSL_RX_1 8
+#define U300_DMA_MSL_RX_2 9
+#define U300_DMA_MSL_RX_3 10
+#define U300_DMA_MSL_RX_4 11
+#define U300_DMA_MSL_RX_5 12
+#define U300_DMA_MSL_RX_6 13
+#define U300_DMA_MMCSD_RX_TX 14
+#define U300_DMA_MSPRO_TX 15
+#define U300_DMA_MSPRO_RX 16
+#define U300_DMA_UART0_TX 17
+#define U300_DMA_UART0_RX 18
+#define U300_DMA_APEX_TX 19
+#define U300_DMA_APEX_RX 20
+#define U300_DMA_PCM_I2S0_TX 21
+#define U300_DMA_PCM_I2S0_RX 22
+#define U300_DMA_PCM_I2S1_TX 23
+#define U300_DMA_PCM_I2S1_RX 24
+#define U300_DMA_XGAM_CDI 25
+#define U300_DMA_XGAM_PDI 26
+#define U300_DMA_SPI_TX 27
+#define U300_DMA_SPI_RX 28
+#define U300_DMA_GENERAL_PURPOSE_0 29
+#define U300_DMA_GENERAL_PURPOSE_1 30
+#define U300_DMA_GENERAL_PURPOSE_2 31
+#define U300_DMA_GENERAL_PURPOSE_3 32
+#define U300_DMA_GENERAL_PURPOSE_4 33
+#define U300_DMA_GENERAL_PURPOSE_5 34
+#define U300_DMA_GENERAL_PURPOSE_6 35
+#define U300_DMA_GENERAL_PURPOSE_7 36
+#define U300_DMA_GENERAL_PURPOSE_8 37
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_UART1_TX 38
+#define U300_DMA_UART1_RX 39
+#else
+#define U300_DMA_GENERAL_PURPOSE_9 38
+#define U300_DMA_GENERAL_PURPOSE_10 39
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_DEVICE_CHANNELS 32
+#else
+#define U300_DMA_DEVICE_CHANNELS 30
+#endif
+#define U300_DMA_CHANNELS 40
+
+
+#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index aa5afbc..803aec1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <plat/mtu.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -108,11 +109,96 @@
.periphid = SSP_PER_ID,
};
+static struct amba_device pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = U8500_RTC_BASE,
+ .end = U8500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+#define U8500_I2C_RESOURCES(id, size) \
+static struct resource u8500_i2c_resources_##id[] = { \
+ [0] = { \
+ .start = U8500_I2C##id##_BASE, \
+ .end = U8500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+U8500_I2C_RESOURCES(0, SZ_4K);
+U8500_I2C_RESOURCES(1, SZ_4K);
+U8500_I2C_RESOURCES(2, SZ_4K);
+U8500_I2C_RESOURCES(3, SZ_4K);
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c_##id = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+
+#define U8500_I2C_PDEVICE(cid) \
+static struct platform_device i2c_controller##cid = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = u8500_i2c_resources_##cid, \
+ .dev = { \
+ .platform_data = &u8500_i2c_##cid \
+ } \
+}
+
+U8500_I2C_PDEVICE(0);
+U8500_I2C_PDEVICE(1);
+U8500_I2C_PDEVICE(2);
+U8500_I2C_PDEVICE(3);
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&pl022_device,
+ &pl031_device,
+};
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c_controller0,
+ &i2c_controller1,
+ &i2c_controller2,
+ &i2c_controller3,
};
static void __init u8500_timer_init(void)
@@ -139,6 +225,8 @@
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
index 5f05e58..397bc1f 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -33,6 +33,7 @@
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a..8de225e 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,12 +8,13 @@
* published by the Free Software Foundation.
*
*/
+#include <mach/hardware.h>
+
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @MMU enabled?
- moveq \rx, #0x80000000 @MMU off, Physical address
- movne \rx, #0xF0000000 @MMU on, Virtual address
- orr \rx, \rx, #0x7000
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =U8500_UART2_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 20dc0c9..e44b0a0 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -45,6 +45,7 @@
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(GPIO),
};
/* Initial clock declarations. */
@@ -68,6 +69,11 @@
static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
+static DEFINE_CLK(timer0, 19);
+static DEFINE_CLK(timer1, 20);
+static DEFINE_CLK(timer2, 21);
+static DEFINE_CLK(timer3, 22);
+static DEFINE_CLK(timer4, 23);
static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
@@ -90,6 +96,11 @@
DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+ DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
+ DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
+ DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
+ DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
+ DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
};
/* Initial serial platform data */
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 9406400..ce228bd 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -15,7 +15,15 @@
*
*/
+#include <linux/io.h>
#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define WTCR (TMR_BA + 0x1C)
+#define WTCLK (1 << 10)
+#define WTE (1 << 7)
+#define WTRE (1 << 1)
static void arch_idle(void)
{
@@ -23,6 +31,11 @@
static void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ } else {
+ __raw_writel(WTE | WTRE | WTCLK, WTCR);
+ }
}
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4128af8..b80f769 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -42,7 +42,10 @@
#define TICKS_PER_SEC 100
#define PRESCALE 0x63 /* Divider = prescale + 1 */
-unsigned int timer0_load;
+#define TDR_SHIFT 24
+#define TDR_MASK ((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
static void nuc900_clockevent_setmode(enum clock_event_mode mode,
struct clock_event_device *clk)
@@ -88,7 +91,7 @@
static struct clock_event_device nuc900_clockevent_device = {
.name = "nuc900-timer0",
.shift = 32,
- .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = nuc900_clockevent_setmode,
.set_next_event = nuc900_clockevent_setnextevent,
.rating = 300,
@@ -112,8 +115,23 @@
.handler = nuc900_timer0_interrupt,
};
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
{
+ unsigned int rate;
+ struct clk *clk = clk_get(NULL, "timer0");
+
+ BUG_ON(IS_ERR(clk));
+
+ __raw_writel(0x00, REG_TCSR0);
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+
+ __raw_writel(RESETINT, REG_TISR);
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
nuc900_clockevent_device.shift);
nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
@@ -127,26 +145,35 @@
static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
- return ~__raw_readl(REG_TDR1);
+ return (~__raw_readl(REG_TDR1)) & TDR_MASK;
}
static struct clocksource clocksource_nuc900 = {
.name = "nuc900-timer1",
.rating = 200,
.read = nuc900_get_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
+ .mask = CLOCKSOURCE_MASK(TDR_SHIFT),
+ .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
{
unsigned int val;
+ unsigned int rate;
+ struct clk *clk = clk_get(NULL, "timer1");
+
+ BUG_ON(IS_ERR(clk));
+
+ __raw_writel(0x00, REG_TCSR1);
+
+ clk_enable(clk);
+ rate = clk_get_rate(clk) / (PRESCALE + 1);
__raw_writel(0xffffffff, REG_TICR1);
val = __raw_readl(REG_TCSR1);
- val |= (COUNTEN | PERIOD);
+ val |= (COUNTEN | PERIOD | PRESCALE);
__raw_writel(val, REG_TCSR1);
clocksource_nuc900.mult =
@@ -156,25 +183,8 @@
static void __init nuc900_timer_init(void)
{
- struct clk *ck_ext = clk_get(NULL, "ext");
- unsigned int rate;
-
- BUG_ON(IS_ERR(ck_ext));
-
- rate = clk_get_rate(ck_ext);
- clk_put(ck_ext);
- rate = rate / (PRESCALE + 0x01);
-
- /* set a known state */
- __raw_writel(0x00, REG_TCSR0);
- __raw_writel(0x00, REG_TCSR1);
- __raw_writel(RESETINT, REG_TISR);
- timer0_load = (rate / TICKS_PER_SEC);
-
- setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
- nuc900_clocksource_init(rate);
- nuc900_clockevents_init(rate);
+ nuc900_clocksource_init();
+ nuc900_clockevents_init();
}
struct sys_timer nuc900_timer = {
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 827e238..e8d34a80 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -27,6 +27,9 @@
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
+AFLAGS_abort-ev6.o :=-Wa,-march=armv6k
+AFLAGS_abort-ev7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
@@ -39,6 +42,9 @@
obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
+AFLAGS_cache-v6.o :=-Wa,-march=armv6
+AFLAGS_cache-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
@@ -58,6 +64,9 @@
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
+AFLAGS_tlb-v6.o :=-Wa,-march=armv6
+AFLAGS_tlb-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
@@ -84,6 +93,9 @@
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
+AFLAGS_proc-v6.o :=-Wa,-march=armv6
+AFLAGS_proc-v7.o :=-Wa,-march=armv7-a
+
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index a89444a..7148e53 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -157,7 +157,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_inv_range)
+fa_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
@@ -180,7 +180,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_clean_range)
+fa_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -205,6 +205,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq fa_dma_clean_range
+ bcs fa_dma_inv_range
+ b fa_dma_flush_range
+ENDPROC(fa_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_unmap_area)
+ mov pc, lr
+ENDPROC(fa_dma_unmap_area)
+
__INITDATA
.type fa_cache_fns, #object
@@ -215,7 +239,7 @@
.long fa_coherent_kern_range
.long fa_coherent_user_range
.long fa_flush_kern_dcache_area
- .long fa_dma_inv_range
- .long fa_dma_clean_range
+ .long fa_dma_map_area
+ .long fa_dma_unmap_area
.long fa_dma_flush_range
.size fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 2a48273..c2ff3c5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -84,20 +84,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -108,18 +94,29 @@
ENTRY(v3_dma_flush_range)
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v3_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v3_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v3_dma_clean_range)
+ENTRY(v3_dma_map_area)
mov pc, lr
+ENDPROC(v3_dma_unmap_area)
+ENDPROC(v3_dma_map_area)
__INITDATA
@@ -131,7 +128,7 @@
.long v3_coherent_kern_range
.long v3_coherent_user_range
.long v3_flush_kern_dcache_area
- .long v3_dma_inv_range
- .long v3_dma_clean_range
+ .long v3_dma_map_area
+ .long v3_dma_unmap_area
.long v3_dma_flush_range
.size v3_cache_fns, . - v3_cache_fns
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 5c7da3e..4810f7e 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -94,20 +94,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -120,18 +106,29 @@
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
#endif
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v4_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v4_dma_clean_range)
+ENTRY(v4_dma_map_area)
mov pc, lr
+ENDPROC(v4_dma_unmap_area)
+ENDPROC(v4_dma_map_area)
__INITDATA
@@ -143,7 +140,7 @@
.long v4_coherent_kern_range
.long v4_coherent_user_range
.long v4_flush_kern_dcache_area
- .long v4_dma_inv_range
- .long v4_dma_clean_range
+ .long v4_dma_map_area
+ .long v4_dma_unmap_area
.long v4_dma_flush_range
.size v4_cache_fns, . - v4_cache_fns
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 3dbedf1e..df8368a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -173,7 +173,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_inv_range)
+v4wb_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -194,7 +194,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_clean_range)
+v4wb_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -216,6 +216,30 @@
.globl v4wb_dma_flush_range
.set v4wb_dma_flush_range, v4wb_coherent_kern_range
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq v4wb_dma_clean_range
+ bcs v4wb_dma_inv_range
+ b v4wb_dma_flush_range
+ENDPROC(v4wb_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_unmap_area)
+ mov pc, lr
+ENDPROC(v4wb_dma_unmap_area)
+
__INITDATA
.type v4wb_cache_fns, #object
@@ -226,7 +250,7 @@
.long v4wb_coherent_kern_range
.long v4wb_coherent_user_range
.long v4wb_flush_kern_dcache_area
- .long v4wb_dma_inv_range
- .long v4wb_dma_clean_range
+ .long v4wb_dma_map_area
+ .long v4wb_dma_unmap_area
.long v4wb_dma_flush_range
.size v4wb_cache_fns, . - v4wb_cache_fns
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index b3b7410..45c7031 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -142,23 +142,12 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wt_dma_inv_range)
+v4wt_dma_inv_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
- /* FALLTHROUGH */
-
-/*
- * dma_clean_range(start, end)
- *
- * Clean the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4wt_dma_clean_range)
mov pc, lr
/*
@@ -172,6 +161,29 @@
.globl v4wt_dma_flush_range
.equ v4wt_dma_flush_range, v4wt_dma_inv_range
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v4wt_dma_inv_range
+ /* FALLTHROUGH */
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_map_area)
+ mov pc, lr
+ENDPROC(v4wt_dma_unmap_area)
+ENDPROC(v4wt_dma_map_area)
+
__INITDATA
.type v4wt_cache_fns, #object
@@ -182,7 +194,7 @@
.long v4wt_coherent_kern_range
.long v4wt_coherent_user_range
.long v4wt_flush_kern_dcache_area
- .long v4wt_dma_inv_range
- .long v4wt_dma_clean_range
+ .long v4wt_dma_map_area
+ .long v4wt_dma_unmap_area
.long v4wt_dma_flush_range
.size v4wt_cache_fns, . - v4wt_cache_fns
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 4ba0a24..9d89c67 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -195,7 +195,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_inv_range)
+v6_dma_inv_range:
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -228,7 +228,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_clean_range)
+v6_dma_clean_range:
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
@@ -263,6 +263,32 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v6_dma_inv_range
+ b v6_dma_clean_range
+ENDPROC(v6_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v6_dma_inv_range
+ mov pc, lr
+ENDPROC(v6_dma_unmap_area)
+
__INITDATA
.type v6_cache_fns, #object
@@ -273,7 +299,7 @@
.long v6_coherent_kern_range
.long v6_coherent_user_range
.long v6_flush_kern_dcache_area
- .long v6_dma_inv_range
- .long v6_dma_clean_range
+ .long v6_dma_map_area
+ .long v6_dma_unmap_area
.long v6_dma_flush_range
.size v6_cache_fns, . - v6_cache_fns
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 9073db8..bcd64f2 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -216,7 +216,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
@@ -240,7 +240,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
@@ -271,6 +271,32 @@
mov pc, lr
ENDPROC(v7_dma_flush_range)
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v7_dma_inv_range
+ b v7_dma_clean_range
+ENDPROC(v7_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v7_dma_inv_range
+ mov pc, lr
+ENDPROC(v7_dma_unmap_area)
+
__INITDATA
.type v7_cache_fns, #object
@@ -281,7 +307,7 @@
.long v7_coherent_kern_range
.long v7_coherent_user_range
.long v7_flush_kern_dcache_area
- .long v7_dma_inv_range
- .long v7_dma_clean_range
+ .long v7_dma_map_area
+ .long v7_dma_unmap_area
.long v7_dma_flush_range
.size v7_cache_fns, . - v7_cache_fns
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 5d180cb..c315492 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -221,15 +221,14 @@
if (!cpu_is_xsc3() || !xsc3_l2_present())
return 0;
- if (!(get_cr() & CR_L2)) {
+ if (get_cr() & CR_L2) {
pr_info("XScale3 L2 cache enabled.\n");
- adjust_cr(CR_L2, CR_L2);
xsc3_l2_inv_all();
- }
- outer_cache.inv_range = xsc3_l2_inv_range;
- outer_cache.clean_range = xsc3_l2_clean_range;
- outer_cache.flush_range = xsc3_l2_flush_range;
+ outer_cache.inv_range = xsc3_l2_inv_range;
+ outer_cache.clean_range = xsc3_l2_clean_range;
+ outer_cache.flush_range = xsc3_l2_flush_range;
+ }
return 0;
}
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 70997d5..5eb4fd9 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -68,12 +68,13 @@
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
feroceon_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index de9c068..f72303e 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -38,7 +38,7 @@
}
void v3_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7370a71..598c51a 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -69,7 +69,7 @@
}
void v4_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 9ab0984..7c2eb55 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -48,12 +48,13 @@
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
v4wb_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 300efaf..172e6a5 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -44,7 +44,7 @@
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 0fa1319..8bca4de 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -34,7 +34,7 @@
* attack the kernel's existing mapping of these pages.
*/
static void v6_copy_user_highpage_nonaliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
@@ -81,7 +81,7 @@
* Copy the page, taking account of the cache colour.
*/
static void v6_copy_user_highpage_aliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long kfrom, kto;
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index bc4525f..747ad41 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -71,12 +71,13 @@
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
xsc3_mc_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 76824d3..9920c0a 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -91,7 +91,7 @@
}
void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 26325cb..64daef2 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -404,78 +404,44 @@
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void dma_cache_maint(const void *start, size_t size, int direction)
+void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
{
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
-
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
-
- inner_op(start, start + size);
- outer_op(__pa(start), __pa(start) + size);
-}
-EXPORT_SYMBOL(dma_cache_maint);
-
-static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
- void *vaddr;
unsigned long paddr;
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
- if (!PageHighMem(page)) {
- vaddr = page_address(page) + offset;
- inner_op(vaddr, vaddr + size);
+ dmac_map_area(kaddr, size, dir);
+
+ paddr = __pa(kaddr);
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
} else {
- vaddr = kmap_high_get(page);
- if (vaddr) {
- vaddr += offset;
- inner_op(vaddr, vaddr + size);
- kunmap_high(page);
- }
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_single_cpu_to_dev);
+
+void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE) {
+ unsigned long paddr = __pa(kaddr);
+ outer_inv_range(paddr, paddr + size);
}
- paddr = page_to_phys(page) + offset;
- outer_op(paddr, paddr + size);
+ dmac_unmap_area(kaddr, size, dir);
}
+EXPORT_SYMBOL(___dma_single_dev_to_cpu);
-void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int dir)
+static void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction dir,
+ void (*op)(const void *, size_t, int))
{
/*
* A single sg entry may refer to multiple physically contiguous
@@ -486,20 +452,62 @@
size_t left = size;
do {
size_t len = left;
- if (PageHighMem(page) && len + offset > PAGE_SIZE) {
- if (offset >= PAGE_SIZE) {
- page += offset / PAGE_SIZE;
- offset %= PAGE_SIZE;
+ void *vaddr;
+
+ if (PageHighMem(page)) {
+ if (len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
}
- len = PAGE_SIZE - offset;
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ op(vaddr, len, dir);
+ kunmap_high(page);
+ }
+ } else {
+ vaddr = page_address(page) + offset;
+ op(vaddr, len, dir);
}
- dma_cache_maint_contiguous(page, offset, len, dir);
offset = 0;
page++;
left -= len;
} while (left);
}
-EXPORT_SYMBOL(dma_cache_maint_page);
+
+void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr;
+
+ dma_cache_maint_page(page, off, size, dir, dmac_map_area);
+
+ paddr = page_to_phys(page) + off;
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
+ } else {
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_page_cpu_to_dev);
+
+void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr = page_to_phys(page) + off;
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE)
+ outer_inv_range(paddr, paddr + size);
+
+ dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+}
+EXPORT_SYMBOL(___dma_page_dev_to_cpu);
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
@@ -573,8 +581,12 @@
int i;
for_each_sg(sg, s, nents, i) {
- dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
- sg_dma_len(s), dir);
+ if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir))
+ continue;
+
+ __dma_page_dev_to_cpu(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
@@ -597,9 +609,8 @@
sg_dma_len(s), dir))
continue;
- if (!arch_is_coherent())
- dma_cache_maint_page(sg_page(s), s->offset,
- s->length, dir);
+ __dma_page_cpu_to_dev(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 56ee153..c9b97e9 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -36,28 +36,12 @@
* Therefore those configurations which might call adjust_pte (those
* without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
*/
-static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
+static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn, pte_t *ptep)
{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte, entry;
+ pte_t entry = *ptep;
int ret;
- pgd = pgd_offset(vma->vm_mm, address);
- if (pgd_none(*pgd))
- goto no_pgd;
- if (pgd_bad(*pgd))
- goto bad_pgd;
-
- pmd = pmd_offset(pgd, address);
- if (pmd_none(*pmd))
- goto no_pmd;
- if (pmd_bad(*pmd))
- goto bad_pmd;
-
- pte = pte_offset_map(pmd, address);
- entry = *pte;
-
/*
* If this page is present, it's actually being shared.
*/
@@ -68,33 +52,55 @@
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
- unsigned long pfn = pte_pfn(entry);
flush_cache_page(vma, address, pfn);
outer_flush_range((pfn << PAGE_SHIFT),
(pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
- set_pte_at(vma->vm_mm, address, pte, entry);
+ set_pte_at(vma->vm_mm, address, ptep, entry);
flush_tlb_page(vma, address);
}
- pte_unmap(pte);
+
return ret;
+}
-bad_pgd:
- pgd_ERROR(*pgd);
- pgd_clear(pgd);
-no_pgd:
- return 0;
+static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn)
+{
+ spinlock_t *ptl;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int ret;
-bad_pmd:
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
-no_pmd:
- return 0;
+ pgd = pgd_offset(vma->vm_mm, address);
+ if (pgd_none_or_clear_bad(pgd))
+ return 0;
+
+ pmd = pmd_offset(pgd, address);
+ if (pmd_none_or_clear_bad(pmd))
+ return 0;
+
+ /*
+ * This is called while another page table is mapped, so we
+ * must use the nested version. This also means we need to
+ * open-code the spin-locking.
+ */
+ ptl = pte_lockptr(vma->vm_mm, pmd);
+ pte = pte_offset_map_nested(pmd, address);
+ spin_lock(ptl);
+
+ ret = do_adjust_pte(vma, address, pfn, pte);
+
+ spin_unlock(ptl);
+ pte_unmap_nested(pte);
+
+ return ret;
}
static void
-make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep, unsigned long pfn)
{
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *mpnt;
@@ -122,11 +128,11 @@
if (!(mpnt->vm_flags & VM_MAYSHARE))
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
- aliases += adjust_pte(mpnt, mpnt->vm_start + offset);
+ aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
}
flush_dcache_mmap_unlock(mapping);
if (aliases)
- adjust_pte(vma, addr);
+ do_adjust_pte(vma, addr, pfn, ptep);
else
flush_cache_page(vma, addr, pfn);
}
@@ -144,9 +150,10 @@
*
* Note that the pte lock will be held.
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct address_space *mapping;
struct page *page;
@@ -168,7 +175,7 @@
#endif
if (mapping) {
if (cache_is_vivt())
- make_coherent(mapping, vma, addr, pfn);
+ make_coherent(mapping, vma, addr, ptep, pfn);
else if (vma->vm_flags & VM_EXEC)
__flush_icache_all();
}
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 6f3a4b7..e34f095 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,7 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -87,13 +88,26 @@
if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
__flush_icache_all();
}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
+#ifdef CONFIG_SMP
+static void flush_ptrace_access_other(void *args)
+{
+ __flush_icache_all();
+}
+#endif
+
+static
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
+ unsigned long uaddr, void *kaddr, unsigned long len)
{
if (cache_is_vivt()) {
- vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ unsigned long addr = (unsigned long)kaddr;
+ __cpuc_coherent_kern_range(addr, addr + len);
+ }
return;
}
@@ -104,16 +118,37 @@
}
/* VIPT non-aliasing cache */
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
- vma->vm_flags & VM_EXEC) {
+ if (vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
- /* only flushing the kernel mapping on non-aliasing VIPT */
__cpuc_coherent_kern_range(addr, addr + len);
+#ifdef CONFIG_SMP
+ if (cache_ops_need_broadcast())
+ smp_call_function(flush_ptrace_access_other,
+ NULL, 1);
+#endif
}
}
-#else
-#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *dst, const void *src,
+ unsigned long len)
+{
+#ifdef CONFIG_SMP
+ preempt_disable();
#endif
+ memcpy(dst, src, len);
+ flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+ preempt_enable();
+#endif
+}
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 52c40d1..a04ffbb 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -616,7 +616,7 @@
"%dK data, %dK init, %luK highmem)\n",
nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
datasize >> 10, initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 8012e24..72507c6 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -265,7 +265,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_inv_range)
+arm1020_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -295,7 +295,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_clean_range)
+arm1020_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -330,6 +330,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020_dma_clean_range
+ bcs arm1020_dma_inv_range
+ b arm1020_dma_flush_range
+ENDPROC(arm1020_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020_dma_unmap_area)
+
ENTRY(arm1020_cache_fns)
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
@@ -337,8 +361,8 @@
.long arm1020_coherent_kern_range
.long arm1020_coherent_user_range
.long arm1020_flush_kern_dcache_area
- .long arm1020_dma_inv_range
- .long arm1020_dma_clean_range
+ .long arm1020_dma_map_area
+ .long arm1020_dma_unmap_area
.long arm1020_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 41fe25d..d278298 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -258,7 +258,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_inv_range)
+arm1020e_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -284,7 +284,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_clean_range)
+arm1020e_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -316,6 +316,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020e_dma_clean_range
+ bcs arm1020e_dma_inv_range
+ b arm1020e_dma_flush_range
+ENDPROC(arm1020e_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020e_dma_unmap_area)
+
ENTRY(arm1020e_cache_fns)
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
@@ -323,8 +347,8 @@
.long arm1020e_coherent_kern_range
.long arm1020e_coherent_user_range
.long arm1020e_flush_kern_dcache_area
- .long arm1020e_dma_inv_range
- .long arm1020e_dma_clean_range
+ .long arm1020e_dma_map_area
+ .long arm1020e_dma_unmap_area
.long arm1020e_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 20a5b1b..ce13e4a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -247,7 +247,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_inv_range)
+arm1022_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -273,7 +273,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_clean_range)
+arm1022_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -305,6 +305,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1022_dma_clean_range
+ bcs arm1022_dma_inv_range
+ b arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1022_dma_unmap_area)
+
ENTRY(arm1022_cache_fns)
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
@@ -312,8 +336,8 @@
.long arm1022_coherent_kern_range
.long arm1022_coherent_user_range
.long arm1022_flush_kern_dcache_area
- .long arm1022_dma_inv_range
- .long arm1022_dma_clean_range
+ .long arm1022_dma_map_area
+ .long arm1022_dma_unmap_area
.long arm1022_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 96aedb1..636672a 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_inv_range)
+arm1026_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -267,7 +267,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_clean_range)
+arm1026_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -299,6 +299,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1026_dma_clean_range
+ bcs arm1026_dma_inv_range
+ b arm1026_dma_flush_range
+ENDPROC(arm1026_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1026_dma_unmap_area)
+
ENTRY(arm1026_cache_fns)
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
@@ -306,8 +330,8 @@
.long arm1026_coherent_kern_range
.long arm1026_coherent_user_range
.long arm1026_flush_kern_dcache_area
- .long arm1026_dma_inv_range
- .long arm1026_dma_clean_range
+ .long arm1026_dma_map_area
+ .long arm1026_dma_unmap_area
.long arm1026_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 471669e..8be8199 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -239,7 +239,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_inv_range)
+arm920_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -262,7 +262,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_clean_range)
+arm920_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -288,6 +288,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm920_dma_clean_range
+ bcs arm920_dma_inv_range
+ b arm920_dma_flush_range
+ENDPROC(arm920_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm920_dma_unmap_area)
+
ENTRY(arm920_cache_fns)
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
@@ -295,8 +319,8 @@
.long arm920_coherent_kern_range
.long arm920_coherent_user_range
.long arm920_flush_kern_dcache_area
- .long arm920_dma_inv_range
- .long arm920_dma_clean_range
+ .long arm920_dma_map_area
+ .long arm920_dma_unmap_area
.long arm920_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index ee111b0..c0ff8e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_inv_range)
+arm922_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -264,7 +264,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_clean_range)
+arm922_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -290,6 +290,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm922_dma_clean_range
+ bcs arm922_dma_inv_range
+ b arm922_dma_flush_range
+ENDPROC(arm922_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm922_dma_unmap_area)
+
ENTRY(arm922_cache_fns)
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
@@ -297,8 +321,8 @@
.long arm922_coherent_kern_range
.long arm922_coherent_user_range
.long arm922_flush_kern_dcache_area
- .long arm922_dma_inv_range
- .long arm922_dma_clean_range
+ .long arm922_dma_map_area
+ .long arm922_dma_unmap_area
.long arm922_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 8deb5bd..3c6cffe 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -283,7 +283,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_inv_range)
+arm925_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -308,7 +308,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_clean_range)
+arm925_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -341,6 +341,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm925_dma_clean_range
+ bcs arm925_dma_inv_range
+ b arm925_dma_flush_range
+ENDPROC(arm925_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm925_dma_unmap_area)
+
ENTRY(arm925_cache_fns)
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
@@ -348,8 +372,8 @@
.long arm925_coherent_kern_range
.long arm925_coherent_user_range
.long arm925_flush_kern_dcache_area
- .long arm925_dma_inv_range
- .long arm925_dma_clean_range
+ .long arm925_dma_map_area
+ .long arm925_dma_unmap_area
.long arm925_dma_flush_range
ENTRY(cpu_arm925_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 64db6e2..75b707c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -246,7 +246,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_inv_range)
+arm926_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -271,7 +271,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_clean_range)
+arm926_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm926_dma_clean_range
+ bcs arm926_dma_inv_range
+ b arm926_dma_flush_range
+ENDPROC(arm926_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm926_dma_unmap_area)
+
ENTRY(arm926_cache_fns)
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
@@ -311,8 +335,8 @@
.long arm926_coherent_kern_range
.long arm926_coherent_user_range
.long arm926_flush_kern_dcache_area
- .long arm926_dma_inv_range
- .long arm926_dma_clean_range
+ .long arm926_dma_map_area
+ .long arm926_dma_unmap_area
.long arm926_dma_flush_range
ENTRY(cpu_arm926_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 8196b9f..1af1657 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -171,7 +171,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_inv_range)
+arm940_dma_inv_range:
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -192,7 +192,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_clean_range)
+arm940_dma_clean_range:
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -233,6 +233,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm940_dma_clean_range
+ bcs arm940_dma_inv_range
+ b arm940_dma_flush_range
+ENDPROC(arm940_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm940_dma_unmap_area)
+
ENTRY(arm940_cache_fns)
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
@@ -240,8 +264,8 @@
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_area
- .long arm940_dma_inv_range
- .long arm940_dma_clean_range
+ .long arm940_dma_map_area
+ .long arm940_dma_unmap_area
.long arm940_dma_flush_range
__INIT
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 9a95123..1664b6a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -215,7 +215,7 @@
* - end - virtual end address
* (same as arm926)
*/
-ENTRY(arm946_dma_inv_range)
+arm946_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -240,7 +240,7 @@
*
* (same as arm926)
*/
-ENTRY(arm946_dma_clean_range)
+arm946_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -275,6 +275,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm946_dma_clean_range
+ bcs arm946_dma_inv_range
+ b arm946_dma_flush_range
+ENDPROC(arm946_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm946_dma_unmap_area)
+
ENTRY(arm946_cache_fns)
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
@@ -282,8 +306,8 @@
.long arm946_coherent_kern_range
.long arm946_coherent_user_range
.long arm946_flush_kern_dcache_area
- .long arm946_dma_inv_range
- .long arm946_dma_clean_range
+ .long arm946_dma_map_area
+ .long arm946_dma_unmap_area
.long arm946_dma_flush_range
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index dbc3938..53e6323 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -274,7 +274,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_inv_range)
+feroceon_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -288,7 +288,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_inv_range)
+feroceon_range_dma_inv_range:
mrs r2, cpsr
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -314,7 +314,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_clean_range)
+feroceon_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -324,7 +324,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_clean_range)
+feroceon_range_dma_clean_range:
mrs r2, cpsr
cmp r1, r0
subne r1, r1, #1 @ top address is inclusive
@@ -367,6 +367,44 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_dma_clean_range
+ bcs feroceon_dma_inv_range
+ b feroceon_dma_flush_range
+ENDPROC(feroceon_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_range_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_range_dma_clean_range
+ bcs feroceon_range_dma_inv_range
+ b feroceon_range_dma_flush_range
+ENDPROC(feroceon_range_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_unmap_area)
+ mov pc, lr
+ENDPROC(feroceon_dma_unmap_area)
+
ENTRY(feroceon_cache_fns)
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
@@ -374,8 +412,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_flush_kern_dcache_area
- .long feroceon_dma_inv_range
- .long feroceon_dma_clean_range
+ .long feroceon_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
@@ -385,8 +423,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_range_flush_kern_dcache_area
- .long feroceon_range_dma_inv_range
- .long feroceon_range_dma_clean_range
+ .long feroceon_range_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_range_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 9674d36..caa3115 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -218,7 +218,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_inv_range)
+mohawk_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_clean_range)
+mohawk_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -268,6 +268,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq mohawk_dma_clean_range
+ bcs mohawk_dma_inv_range
+ b mohawk_dma_flush_range
+ENDPROC(mohawk_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_unmap_area)
+ mov pc, lr
+ENDPROC(mohawk_dma_unmap_area)
+
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
@@ -275,8 +299,8 @@
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_area
- .long mohawk_dma_inv_range
- .long mohawk_dma_clean_range
+ .long mohawk_dma_map_area
+ .long mohawk_dma_unmap_area
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 96456f5..e5797f1 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -257,7 +257,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_inv_range)
+xsc3_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
@@ -278,7 +278,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_clean_range)
+xsc3_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xsc3_dma_clean_range
+ bcs xsc3_dma_inv_range
+ b xsc3_dma_flush_range
+ENDPROC(xsc3_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xsc3_dma_unmap_area)
+
ENTRY(xsc3_cache_fns)
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
@@ -311,8 +335,8 @@
.long xsc3_coherent_kern_range
.long xsc3_coherent_user_range
.long xsc3_flush_kern_dcache_area
- .long xsc3_dma_inv_range
- .long xsc3_dma_clean_range
+ .long xsc3_dma_map_area
+ .long xsc3_dma_unmap_area
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
@@ -407,6 +431,13 @@
adr r5, xsc3_crval
ldmia r5, {r5, r6}
+
+#ifdef CONFIG_CACHE_XSC3L2
+ mrc p15, 1, r0, c0, c0, 1 @ get L2 present information
+ ands r0, r0, #0xf8
+ orrne r6, r6, #(1 << 26) @ enable L2 if present
+#endif
+
mrc p15, 0, r0, c1, c0, 0 @ get control register
bic r0, r0, r5 @ ..V. ..R. .... ..A.
orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 93df472..63037e2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -315,7 +315,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_inv_range)
+xscale_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -336,7 +336,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_clean_range)
+xscale_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
@@ -363,6 +363,43 @@
mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ bcs xscale_dma_inv_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_a0_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ b xscale_dma_flush_range
+ENDPROC(xscsale_dma_a0_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xscale_dma_unmap_area)
+
ENTRY(xscale_cache_fns)
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
@@ -370,8 +407,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_inv_range
- .long xscale_dma_clean_range
+ .long xscale_dma_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
/*
@@ -394,8 +431,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_flush_range
- .long xscale_dma_clean_range
+ .long xscale_dma_a0_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
ENTRY(cpu_xscale_dcache_clean_area)
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index a26a605..0cb1848 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -40,7 +40,6 @@
asid r3, r3 @ mask ASID
orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
mov r1, r1, lsl #PAGE_SHIFT
- vma_vm_flags r2, r2 @ get vma->vm_flags
1:
#ifdef CONFIG_SMP
mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 810c47f..9af494f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -58,19 +58,19 @@
#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
@@ -418,23 +418,23 @@
#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 91e7381..854e2dc 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,4 +41,8 @@
#define UART1_BASE_ADDR 0x43f90000
#define UART2_BASE_ADDR 0x43f94000
+#define MX25_FEC_BASE_ADDR 0x50038000
+
+#define MX25_INT_FEC 57
+
#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
new file mode 100644
index 0000000..1621db6
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PLAT_I2C_H
+#define __PLAT_I2C_H
+
+enum i2c_freq_mode {
+ I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
+ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
+ I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq: clock frequency for the operation mode
+ * @slsu: Slave data setup time in ns.
+ * The needed setup time for three modes of operation
+ * are 250ns, 100ns and 10ns respectively thus leading
+ * to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @sm: speed mode
+ */
+struct nmk_i2c_controller {
+ unsigned long clk_freq;
+ unsigned short slsu;
+ unsigned char tft;
+ unsigned char rft;
+ enum i2c_freq_mode sm;
+};
+
+#endif /* __PLAT_I2C_H */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 89cafc9..d9f8c84 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,6 @@
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
- * clock framework is not up , it is defined here to avoid rework in
- * every driver. Also dummy prcm reset function is added */
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
@@ -305,7 +301,6 @@
clk_enable(clkp);
}
}
-EXPORT_SYMBOL(clk_enable_init_clocks);
/*
* Low level helpers
@@ -334,7 +329,16 @@
arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
-EXPORT_SYMBOL(clk_init_cpufreq_table);
+
+void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_exit_cpufreq_table)
+ arch_clock->clk_exit_cpufreq_table(table);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
#endif
/*-------------------------------------------------------------------------*/
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index f8ddbdd..6d3d333 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -134,6 +134,7 @@
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
+ clk_exit_cpufreq_table(&freq_table);
clk_put(mpu_clk);
return 0;
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 0484681..d17620c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -192,6 +192,7 @@
u32 saved_risingdetect;
#endif
u32 level_mask;
+ u32 toggle_mask;
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
@@ -749,6 +750,44 @@
}
#endif
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_INT_EDGE;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_CONTROL;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
+ break;
+#endif
+ default:
+ return;
+ }
+
+ l = __raw_readl(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(1 << gpio);
+ else
+ l |= 1 << gpio;
+
+ __raw_writel(l, reg);
+}
+
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
@@ -759,6 +798,8 @@
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -771,6 +812,8 @@
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -803,6 +846,8 @@
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -1072,7 +1117,7 @@
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
@@ -1217,7 +1262,7 @@
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq;
+ unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
@@ -1284,9 +1329,23 @@
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
+ gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
if (!(isr & 1))
continue;
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (1 << gpio_index))
+ _toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
generic_handle_irq(gpio_irq);
}
}
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 376ce18..5cd6220 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -99,7 +99,6 @@
struct omap_backlight_config {
int default_intensity;
int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
};
struct omap_fbmem_config {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 309b6d1..94fe2a0 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -119,6 +119,7 @@
void (*clk_disable_unused)(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+ void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
#endif
};
@@ -135,6 +136,7 @@
extern void clk_enable_init_clocks(void);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern const struct clkops clkops_null;
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index 2ae8843..a745d62 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -147,7 +147,7 @@
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
- + ((i) >> 1) * 4 + (!(i) & 1) * 2)
+ + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 7e5319f..a3e7b47 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -122,16 +122,21 @@
#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SMS_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_24XX_VIRT 0xe0000000
-#define DSP_MEM_24XX_SIZE 0x28000
-#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_24XX_VIRT 0xe1000000
-#define DSP_IPI_24XX_SIZE SZ_4K
-#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT 0xe2000000
-#define DSP_MMU_24XX_SIZE SZ_4K
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
+ /* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT 0xfc100000
+#define DSP_MEM_2420_SIZE 0x28000
+#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
+ /* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT 0xfc128000
+#define DSP_IPI_2420_SIZE SZ_4K
+#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
+ /* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT 0xfc129000
+#define DSP_MMU_2420_SIZE SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
/*
* ----------------------------------------------------------------------------
@@ -182,16 +187,7 @@
#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SDRC_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_34XX_VIRT 0xe0000000
-#define DSP_MEM_34XX_SIZE 0x28000
-#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_34XX_VIRT 0xe1000000
-#define DSP_IPI_34XX_SIZE SZ_4K
-#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT 0xe2000000
-#define DSP_MMU_34XX_SIZE SZ_4K
+/* 3430 IVA - currently unmapped */
/*
* ----------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 8f069cc..692c90e 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -183,6 +183,14 @@
/* I2C */
I2C_7XX_SCL,
I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
};
enum omap1xxx_index {
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
index 53f5241..48e4757 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -46,6 +46,9 @@
#define OMAP7XX_DSPREG_SIZE SZ_128K
#define OMAP7XX_DSPREG_START 0xE1000000
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
/*
* ----------------------------------------------------------------------------
* OMAP7XX specific configuration registers
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 11f5d79..0cfd54f 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -66,12 +66,12 @@
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
}
if (cpu_is_omap2420()) {
- if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
- return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
- if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
- return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
- if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
- return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+ if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
+ return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
+ if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
+ return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
+ if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
+ return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
}
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index c0ff1e3..463d638 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -827,7 +827,7 @@
**/
void iommu_put(struct iommu *obj)
{
- if (!obj && IS_ERR(obj))
+ if (!obj || IS_ERR(obj))
return;
mutex_lock(&obj->iommu_lock);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 2cc1cc3..f757672 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -436,7 +436,7 @@
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
- return err;
+ goto error;
}
init_completion(&mcbsp->rx_irq_completion);
@@ -446,12 +446,26 @@
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- return err;
+ goto tx_irq;
}
}
return 0;
+tx_irq:
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+error:
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(id);
+
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ mcbsp->free = 1;
+
+ return err;
}
EXPORT_SYMBOL(omap_mcbsp_request);
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index a9eabdc..51dc5c8 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -204,14 +204,14 @@
goto err_free_clk;
}
- r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
if (r == NULL) {
dev_err(&pdev->dev, "failed to request memory resource\n");
ret = -EBUSY;
goto err_free_clk;
}
- pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ pwm->mmio_base = ioremap(r->start, resource_size(r));
if (pwm->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to ioremap() registers\n");
ret = -ENODEV;
@@ -241,7 +241,7 @@
return 0;
err_free_mem:
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
err_free_clk:
clk_put(pwm->clk);
err_free:
@@ -271,7 +271,7 @@
iounmap(pwm->mmio_base);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
clk_put(pwm->clk);
kfree(pwm);
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 84808cc..a52fb6c 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -58,8 +58,8 @@
return -ENOMEM;
}
- size = sizeof(int) * set->nr_chips;
- if (size) {
+ if (set->nr_map && set->nr_chips) {
+ size = sizeof(int) * set->nr_chips;
ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
set->nr_map = ptr;
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6ffa21e..ffd56de 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -46,6 +46,7 @@
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
+#define clk_fout_epll clk_epll
struct clk_sources {
unsigned int nr_sources;
@@ -88,11 +89,6 @@
.sources = &clk_src_apll,
};
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
[1] = &clk_fout_epll,
@@ -715,7 +711,6 @@
&clk_iis_cd1,
&clk_pcm_cd,
&clk_mout_epll.clk,
- &clk_fout_epll,
&clk_mout_mpll.clk,
&clk_dout_mpll,
&clk_mmc0.clk,
@@ -760,7 +755,4 @@
clkp->name, ret);
}
}
-
- clk_mpll.parent = &clk_mout_mpll.clk;
- clk_epll.parent = &clk_mout_epll.clk;
}
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda1..a9ae30c 100644
--- a/arch/avr32/include/asm/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
@@ -325,7 +325,7 @@
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* Encode and decode a swap entry
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index 06677be..0da2310 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -101,7 +101,7 @@
}
void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
unsigned long flags;
@@ -110,7 +110,7 @@
return;
local_irq_save(flags);
- update_dtlb(address, pte);
+ update_dtlb(address, *ptep);
local_irq_restore(flags);
}
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 944a07c..1d04e40 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -10,4 +10,9 @@
#include <asm-generic/page.h>
#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
#endif
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index f1036b6..34c7c3e 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -6,23 +6,9 @@
* Licensed under the GPL-2 or later.
*/
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
#include <linux/ptrace.h> /* for linux pt_regs struct */
#include <linux/kgdb.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/dma.h>
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
@@ -147,7 +133,7 @@
regs->lb1 = gdb_regs[BFIN_LB1];
regs->usp = gdb_regs[BFIN_USP];
regs->syscfg = gdb_regs[BFIN_SYSCFG];
- regs->retx = gdb_regs[BFIN_PC];
+ regs->retx = gdb_regs[BFIN_RETX];
regs->retn = gdb_regs[BFIN_RETN];
regs->rete = gdb_regs[BFIN_RETE];
regs->pc = gdb_regs[BFIN_PC];
@@ -424,182 +410,6 @@
.correct_hw_break = bfin_correct_hw_break,
};
-static int hex(char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return ch - 'a' + 10;
- if ((ch >= '0') && (ch <= '9'))
- return ch - '0';
- if ((ch >= 'A') && (ch <= 'F'))
- return ch - 'A' + 10;
- return -1;
-}
-
-static int validate_memory_access_address(unsigned long addr, int size)
-{
- if (size < 0 || addr == 0)
- return -EFAULT;
- return bfin_mem_access_type(addr, size);
-}
-
-static int bfin_probe_kernel_read(char *dst, char *src, int size)
-{
- unsigned long lsrc = (unsigned long)src;
- int mem_type;
-
- mem_type = validate_memory_access_address(lsrc, size);
- if (mem_type < 0)
- return mem_type;
-
- if (lsrc >= SYSMMR_BASE) {
- if (size == 2 && lsrc % 2 == 0) {
- u16 mmr = bfin_read16(src);
- memcpy(dst, &mmr, sizeof(mmr));
- return 0;
- } else if (size == 4 && lsrc % 4 == 0) {
- u32 mmr = bfin_read32(src);
- memcpy(dst, &mmr, sizeof(mmr));
- return 0;
- }
- } else {
- switch (mem_type) {
- case BFIN_MEM_ACCESS_CORE:
- case BFIN_MEM_ACCESS_CORE_ONLY:
- return probe_kernel_read(dst, src, size);
- /* XXX: should support IDMA here with SMP */
- case BFIN_MEM_ACCESS_DMA:
- if (dma_memcpy(dst, src, size))
- return 0;
- break;
- case BFIN_MEM_ACCESS_ITEST:
- if (isram_memcpy(dst, src, size))
- return 0;
- break;
- }
- }
-
- return -EFAULT;
-}
-
-static int bfin_probe_kernel_write(char *dst, char *src, int size)
-{
- unsigned long ldst = (unsigned long)dst;
- int mem_type;
-
- mem_type = validate_memory_access_address(ldst, size);
- if (mem_type < 0)
- return mem_type;
-
- if (ldst >= SYSMMR_BASE) {
- if (size == 2 && ldst % 2 == 0) {
- u16 mmr;
- memcpy(&mmr, src, sizeof(mmr));
- bfin_write16(dst, mmr);
- return 0;
- } else if (size == 4 && ldst % 4 == 0) {
- u32 mmr;
- memcpy(&mmr, src, sizeof(mmr));
- bfin_write32(dst, mmr);
- return 0;
- }
- } else {
- switch (mem_type) {
- case BFIN_MEM_ACCESS_CORE:
- case BFIN_MEM_ACCESS_CORE_ONLY:
- return probe_kernel_write(dst, src, size);
- /* XXX: should support IDMA here with SMP */
- case BFIN_MEM_ACCESS_DMA:
- if (dma_memcpy(dst, src, size))
- return 0;
- break;
- case BFIN_MEM_ACCESS_ITEST:
- if (isram_memcpy(dst, src, size))
- return 0;
- break;
- }
- }
-
- return -EFAULT;
-}
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null). May return an error.
- */
-int kgdb_mem2hex(char *mem, char *buf, int count)
-{
- char *tmp;
- int err;
-
- /*
- * We use the upper half of buf as an intermediate buffer for the
- * raw memory copy. Hex conversion will work against this one.
- */
- tmp = buf + count;
-
- err = bfin_probe_kernel_read(tmp, mem, count);
- if (!err) {
- while (count > 0) {
- buf = pack_hex_byte(buf, *tmp);
- tmp++;
- count--;
- }
-
- *buf = 0;
- }
-
- return err;
-}
-
-/*
- * Copy the binary array pointed to by buf into mem. Fix $, #, and
- * 0x7d escaped with 0x7d. Return a pointer to the character after
- * the last byte written.
- */
-int kgdb_ebin2mem(char *buf, char *mem, int count)
-{
- char *tmp_old, *tmp_new;
- int size;
-
- tmp_old = tmp_new = buf;
-
- for (size = 0; size < count; ++size) {
- if (*tmp_old == 0x7d)
- *tmp_new = *(++tmp_old) ^ 0x20;
- else
- *tmp_new = *tmp_old;
- tmp_new++;
- tmp_old++;
- }
-
- return bfin_probe_kernel_write(mem, buf, count);
-}
-
-/*
- * Convert the hex array pointed to by buf into binary to be placed in mem.
- * Return a pointer to the character AFTER the last byte written.
- * May return an error.
- */
-int kgdb_hex2mem(char *buf, char *mem, int count)
-{
- char *tmp_raw, *tmp_hex;
-
- /*
- * We use the upper half of buf as an intermediate buffer for the
- * raw memory that is converted from hex.
- */
- tmp_raw = buf + count * 2;
-
- tmp_hex = tmp_raw - 1;
- while (tmp_hex >= buf) {
- tmp_raw--;
- *tmp_raw = hex(*tmp_hex--);
- *tmp_raw |= hex(*tmp_hex--) << 4;
- }
-
- return bfin_probe_kernel_write(mem, tmp_raw, count);
-}
-
#define IN_MEM(addr, size, l1_addr, l1_size) \
({ \
unsigned long __addr = (unsigned long)(addr); \
@@ -629,21 +439,6 @@
return -EFAULT;
}
-int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
-{
- int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
- BREAK_INSTR_SIZE);
- if (err)
- return err;
- return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
- BREAK_INSTR_SIZE);
-}
-
-int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
-{
- return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
-}
-
int kgdb_arch_init(void)
{
kgdb_single_step = 0;
diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile
index d489f89..4c011b1f6 100644
--- a/arch/blackfin/mm/Makefile
+++ b/arch/blackfin/mm/Makefile
@@ -2,4 +2,4 @@
# arch/blackfin/mm/Makefile
#
-obj-y := sram-alloc.o isram-driver.o init.o
+obj-y := sram-alloc.o isram-driver.o init.o maccess.o
diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c
new file mode 100644
index 0000000..b71cebc
--- /dev/null
+++ b/arch/blackfin/mm/maccess.c
@@ -0,0 +1,97 @@
+/*
+ * safe read and write memory routines callable while atomic
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+
+static int validate_memory_access_address(unsigned long addr, int size)
+{
+ if (size < 0 || addr == 0)
+ return -EFAULT;
+ return bfin_mem_access_type(addr, size);
+}
+
+long probe_kernel_read(void *dst, void *src, size_t size)
+{
+ unsigned long lsrc = (unsigned long)src;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(lsrc, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (lsrc >= SYSMMR_BASE) {
+ if (size == 2 && lsrc % 2 == 0) {
+ u16 mmr = bfin_read16(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return 0;
+ } else if (size == 4 && lsrc % 4 == 0) {
+ u32 mmr = bfin_read32(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return 0;
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return __probe_kernel_read(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
+ }
+
+ return -EFAULT;
+}
+
+long probe_kernel_write(void *dst, void *src, size_t size)
+{
+ unsigned long ldst = (unsigned long)dst;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(ldst, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (ldst >= SYSMMR_BASE) {
+ if (size == 2 && ldst % 2 == 0) {
+ u16 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write16(dst, mmr);
+ return 0;
+ } else if (size == 4 && ldst % 4 == 0) {
+ u32 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write32(dst, mmr);
+ return 0;
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return __probe_kernel_write(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
+ }
+
+ return -EFAULT;
+}
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 1fcce00..99ea6cd 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -270,7 +270,7 @@
* Actually I am not sure on what this could be used for.
*/
static inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
index 25c6a50..8c97068 100644
--- a/arch/frv/include/asm/page.h
+++ b/arch/frv/include/asm/page.h
@@ -63,12 +63,10 @@
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_MMU
#define VM_DATA_DEFAULT_FLAGS \
(VM_READ | VM_WRITE | \
((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif
#endif /* __ASSEMBLY__ */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 22c6069..c18b0d3 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -505,7 +505,7 @@
/*
* preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
*/
-static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
unsigned long ampr;
diff --git a/arch/ia64/include/asm/ftrace.h b/arch/ia64/include/asm/ftrace.h
index d20db3c..fbd1a24 100644
--- a/arch/ia64/include/asm/ftrace.h
+++ b/arch/ia64/include/asm/ftrace.h
@@ -8,7 +8,6 @@
extern void _mcount(unsigned long pfs, unsigned long r1, unsigned long b0, unsigned long r0);
#define mcount _mcount
-#include <asm/kprobes.h>
/* In IA64, MCOUNT_ADDR is set in link time, so it's not a constant at compile time */
#define MCOUNT_ADDR (((struct fnptr *)mcount)->ip)
#define FTRACE_ADDR (((struct fnptr *)ftrace_caller)->ip)
diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h
index dbf83fb..d5505d6 100644
--- a/arch/ia64/include/asm/kprobes.h
+++ b/arch/ia64/include/asm/kprobes.h
@@ -103,11 +103,6 @@
bundle_t bundle;
} kprobe_opcode_t;
-struct fnptr {
- unsigned long ip;
- unsigned long gp;
-};
-
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
/* copy of the instruction to be emulated */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 69bf138..c3286f4 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -462,7 +462,7 @@
return pte_val(a) == pte_val(b);
}
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init (void);
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 85d965c..23cce99 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -74,7 +74,7 @@
extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
extern void ia64_ptr_entry(u64 target_mask, int slot);
-extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS];
/*
region register macros
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 3ddb4e7..d323071 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -33,7 +33,9 @@
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
-#define cpumask_of_node(node) (&node_to_cpu_mask[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &node_to_cpu_mask[node])
/*
* Returns the number of the node containing Node 'nid'.
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index bcd260e..93773fd 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -35,6 +35,11 @@
*/
# ifdef __KERNEL__
+struct fnptr {
+ unsigned long ip;
+ unsigned long gp;
+};
+
/* DMA addresses are 64-bits wide, in general. */
typedef u64 dma_addr_t;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 32f2639..378b483 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1225,9 +1225,12 @@
unsigned long psr;
int cpu = smp_processor_id();
+ if (!ia64_idtrs[cpu])
+ return;
+
psr = ia64_clear_ic();
for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) {
- p = &__per_cpu_idtrs[cpu][iord-1][i];
+ p = ia64_idtrs[cpu] + (iord - 1) * IA64_TR_ALLOC_MAX;
if (p->pte & 0x1) {
old_rr = ia64_get_rr(p->ifa);
if (old_rr != p->rr) {
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 5246285..6bcbe21 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2293,7 +2293,7 @@
* if ((mm->total_vm << PAGE_SHIFT) + len> task->rlim[RLIMIT_AS].rlim_cur)
* return -ENOMEM;
*/
- if (size > task->signal->rlim[RLIMIT_MEMLOCK].rlim_cur)
+ if (size > task_rlimit(task, RLIMIT_MEMLOCK))
return -ENOMEM;
/*
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index b9609c6..7c0d481 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -91,7 +91,7 @@
inline void
ia64_set_rbs_bot (void)
{
- unsigned long stack_size = current->signal->rlim[RLIMIT_STACK].rlim_max & -16;
+ unsigned long stack_size = rlimit_max(RLIMIT_STACK) & -16;
if (stack_size > MAX_USER_STACK_SIZE)
stack_size = MAX_USER_STACK_SIZE;
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index ee09d26..f3de9d7 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -48,7 +48,7 @@
DEFINE_PER_CPU(u8, ia64_tr_num); /*Number of TR slots in current processor*/
DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/
-struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+struct ia64_tr_entry *ia64_idtrs[NR_CPUS];
/*
* Initializes the ia64_ctx.bitmap array based on max_ctx+1.
@@ -429,10 +429,16 @@
struct ia64_tr_entry *p;
int cpu = smp_processor_id();
+ if (!ia64_idtrs[cpu]) {
+ ia64_idtrs[cpu] = kmalloc(2 * IA64_TR_ALLOC_MAX *
+ sizeof (struct ia64_tr_entry), GFP_KERNEL);
+ if (!ia64_idtrs[cpu])
+ return -ENOMEM;
+ }
r = -EINVAL;
/*Check overlap with existing TR entries*/
if (target_mask & 0x1) {
- p = &__per_cpu_idtrs[cpu][0][0];
+ p = ia64_idtrs[cpu];
for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
i++, p++) {
if (p->pte & 0x1)
@@ -444,7 +450,7 @@
}
}
if (target_mask & 0x2) {
- p = &__per_cpu_idtrs[cpu][1][0];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX;
for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
i++, p++) {
if (p->pte & 0x1)
@@ -459,16 +465,16 @@
for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) {
switch (target_mask & 0x3) {
case 1:
- if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + i)->pte & 0x1))
goto found;
continue;
case 2:
- if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
goto found;
continue;
case 3:
- if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) &&
- !(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (!((ia64_idtrs[cpu] + i)->pte & 0x1) &&
+ !((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
goto found;
continue;
default:
@@ -488,7 +494,7 @@
if (target_mask & 0x1) {
ia64_itr(0x1, i, va, pte, log_size);
ia64_srlz_i();
- p = &__per_cpu_idtrs[cpu][0][i];
+ p = ia64_idtrs[cpu] + i;
p->ifa = va;
p->pte = pte;
p->itir = log_size << 2;
@@ -497,7 +503,7 @@
if (target_mask & 0x2) {
ia64_itr(0x2, i, va, pte, log_size);
ia64_srlz_i();
- p = &__per_cpu_idtrs[cpu][1][i];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i;
p->ifa = va;
p->pte = pte;
p->itir = log_size << 2;
@@ -528,7 +534,7 @@
return;
if (target_mask & 0x1) {
- p = &__per_cpu_idtrs[cpu][0][slot];
+ p = ia64_idtrs[cpu] + slot;
if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
p->pte = 0;
ia64_ptr(0x1, p->ifa, p->itir>>2);
@@ -537,7 +543,7 @@
}
if (target_mask & 0x2) {
- p = &__per_cpu_idtrs[cpu][1][slot];
+ p = ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + slot;
if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
p->pte = 0;
ia64_ptr(0x2, p->ifa, p->itir>>2);
@@ -546,8 +552,8 @@
}
for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) {
- if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) ||
- (__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ if (((ia64_idtrs[cpu] + i)->pte & 0x1) ||
+ ((ia64_idtrs[cpu] + IA64_TR_ALLOC_MAX + i)->pte & 0x1))
break;
}
per_cpu(ia64_tr_used, cpu) = i;
diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
index 0ef9530..92614b0 100644
--- a/arch/m32r/include/asm/tlbflush.h
+++ b/arch/m32r/include/asm/tlbflush.h
@@ -92,6 +92,6 @@
);
}
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
#endif /* _ASM_M32R_TLBFLUSH_H */
diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c
index 8846917..888aab1 100644
--- a/arch/m32r/mm/fault-nommu.c
+++ b/arch/m32r/mm/fault-nommu.c
@@ -95,7 +95,7 @@
* update_mmu_cache()
*======================================================================*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
- pte_t pte)
+ pte_t *ptep)
{
BUG();
}
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 7274b47..28ee389 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -336,7 +336,7 @@
addr = (address & PAGE_MASK);
set_thread_fault_code(error_code);
- update_mmu_cache(NULL, addr, *pte_k);
+ update_mmu_cache(NULL, addr, pte_k);
set_thread_fault_code(0);
return;
}
@@ -349,7 +349,7 @@
#define ITLB_END (unsigned long *)(ITLB_BASE + (NR_TLB_ENTRIES * 8))
#define DTLB_END (unsigned long *)(DTLB_BASE + (NR_TLB_ENTRIES * 8))
void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
- pte_t pte)
+ pte_t *ptep)
{
volatile unsigned long *entry1, *entry2;
unsigned long pte_data, flags;
@@ -365,7 +365,7 @@
vaddr = (vaddr & PAGE_MASK) | get_asid();
- pte_data = pte_val(pte);
+ pte_data = pte_val(*ptep);
#ifdef CONFIG_CHIP_OPSP
entry1 = (unsigned long *)ITLB_BASE;
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 7f57436..359065d5 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -3,6 +3,7 @@
#ifdef __KERNEL__
+#include <asm/virtconvert.h>
/*
* These are for ISA/PCI shared memory _only_ and should never be used
@@ -165,19 +166,6 @@
extern void iounmap(void *addr);
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 1f31b06..8029a33 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -56,8 +56,8 @@
#ifndef __ASSEMBLY__
-#define __pa(vaddr) virt_to_phys((void *)(vaddr))
-#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+#define __pa(vaddr) ((unsigned long)(vaddr))
+#define __va(paddr) ((void *)(paddr))
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index aca0e28..87174c9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -115,7 +115,7 @@
* they are updated on demand.
*/
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
index 22ab05c..3f834b3 100644
--- a/arch/m68k/include/asm/virtconvert.h
+++ b/arch/m68k/include/asm/virtconvert.h
@@ -26,6 +26,7 @@
}
/* Permanent address of a page. */
+#ifdef CONFIG_MMU
#ifdef CONFIG_SINGLE_MEMORY_CHUNK
#define page_to_phys(page) \
__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
@@ -37,6 +38,9 @@
page_to_pfn(__page) << PAGE_SHIFT; \
})
#endif
+#else
+#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
+#endif
/*
* IO bus memory addresses are 1:1 with the physical address,
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index d8720ee..aebea19 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -146,7 +146,6 @@
.read = pit_read_clk,
.shift = 20,
.mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/***************************************************************************/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index fd53e50..cd5837e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -90,7 +90,7 @@
menu "Processor type and features"
-source kernel/time/Kconfig
+source "kernel/time/Kconfig"
source "kernel/Kconfig.preempt"
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index a917dc5..d74dbfb 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -54,6 +54,7 @@
int pt_mode;
};
+#ifdef __KERNEL__
#define kernel_mode(regs) ((regs)->pt_mode)
#define user_mode(regs) (!kernel_mode(regs))
@@ -62,6 +63,19 @@
void show_regs(struct pt_regs *);
+#else /* __KERNEL__ */
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t))
+#define PT_PC (32 * sizeof(microblaze_reg_t))
+#define PT_MSR (33 * sizeof(microblaze_reg_t))
+#define PT_EAR (34 * sizeof(microblaze_reg_t))
+#define PT_ESR (35 * sizeof(microblaze_reg_t))
+#define PT_FSR (36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index eb31a0e..10ec70c 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -38,7 +38,7 @@
#define flush_tlb_kernel_range(start, end) do { } while (0)
-#define update_mmu_cache(vma, addr, pte) do { } while (0)
+#define update_mmu_cache(vma, addr, ptep) do { } while (0)
#define flush_tlb_all local_flush_tlb_all
#define flush_tlb_mm local_flush_tlb_mm
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index cb05a07..2b67e92 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -377,13 +377,14 @@
#define __NR_shutdown 359 /* new */
#define __NR_sendmsg 360 /* new */
#define __NR_recvmsg 361 /* new */
-#define __NR_accept04 362 /* new */
+#define __NR_accept4 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
#define __NR_rt_tgsigqueueinfo 365 /* new */
#define __NR_perf_event_open 366 /* new */
+#define __NR_recvmmsg 367 /* new */
-#define __NR_syscalls 367
+#define __NR_syscalls 368
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index ae0352e..bf7e6c2 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -256,7 +256,7 @@
if (ppdev == NULL) {
struct pci_controller *host;
host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->arch_data : NULL;
+ ppnode = host ? host->dn : NULL;
/* No node for host bridge ? give up */
if (ppnode == NULL)
return -EINVAL;
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4088be7..03376dc 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -366,7 +366,7 @@
.long sys_shutdown
.long sys_sendmsg /* 360 */
.long sys_recvmsg
- .long sys_ni_syscall
+ .long sys_accept4
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_rt_tgsigqueueinfo /* 365 */
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 19c1c82..5c68569 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -613,7 +613,7 @@
dma_cache_wback_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
- dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer. */
@@ -676,7 +676,7 @@
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
- dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer. */
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
index 5ad6f1d..c1fdd36 100644
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -219,14 +219,6 @@
if (strstr(prom_getcmdline(), "console="))
return;
-#ifdef CONFIG_KGDB
- if (!strstr(prom_getcmdline(), "nokgdb")) {
- strcat(prom_getcmdline(), " console=kgdb");
- kgdb_enabled = 1;
- return;
- }
-#endif
-
s = prom_getenv("modetty0");
if (s) {
baud = simple_strtoul(s, &p, 10);
@@ -280,13 +272,6 @@
writel(value, (void *)PORT(offset));
}
-char prom_getchar(void)
-{
- while (!(serial_in(UART_LSR) & UART_LSR_DR))
- ;
- return serial_in(UART_RX);
-}
-
int prom_putchar(char c)
{
while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 05a35cf..1fe412c 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -346,27 +346,26 @@
};
static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
- .enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
- },
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
- .enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
- },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
-
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
};
static struct board_info __initdata board_DV201AMR = {
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index fb284fb..be252ef 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -40,9 +40,6 @@
reg &= ~mask;
bcm_perf_writel(reg, PERF_CKCTL_REG);
- /* assign command line from kernel config */
- strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
/* register gpiochip */
bcm63xx_gpio_init();
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index ba63401..4667a5f 100644
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -1,4 +1,5 @@
mkboot
elf2ecoff
+vmlinux.*
zImage
zImage.tmp
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 094bc847..e39a08e 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -28,7 +28,7 @@
all: vmlinux.ecoff vmlinux.srec
vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
- $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+ $(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS)
$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
$(HOSTCC) -o $@ $^
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index e27f40b..671d344 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -56,7 +56,7 @@
LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
$(call if_changed,ld)
- $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+ $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@
#
# Some DECstations need all possible sections of an ECOFF executable
@@ -84,14 +84,11 @@
$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
$(Q)$(HOSTCC) -o $@ $^
-drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags = $(addprefix --remove-section=,$(drop-sections))
-
-OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
vmlinuz.bin: vmlinuz
$(call if_changed,objcopy)
-OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
vmlinuz.srec: vmlinuz
$(call if_changed,objcopy)
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 67330c2..e48fd72 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -28,8 +28,6 @@
/* The linker tells us where the image is. */
extern unsigned char __image_begin, __image_end;
-extern unsigned char __ramdisk_begin, __ramdisk_end;
-unsigned long initrd_size;
/* debug interfaces */
extern void puts(const char *s);
@@ -102,14 +100,6 @@
puthex((unsigned long)(zimage_size + zimage_start));
puts("\n");
- if (initrd_size) {
- puts("initrd at: ");
- puthex((unsigned long)(&__ramdisk_begin));
- puts(" ");
- puthex((unsigned long)(&__ramdisk_end));
- puts("\n");
- }
-
/* this area are prepared for mallocing when decompressing */
free_mem_ptr = boot_heap_start;
free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
index 29e9f4c..613a35b 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -1,150 +1,67 @@
+/*
+ * ld.script for compressed kernel support of MIPS
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
OUTPUT_ARCH(mips)
ENTRY(start)
SECTIONS
{
- /* Read-only sections, merged into text segment: */
- .init : { *(.init) } =0
- .text :
- {
- _ftext = . ;
- *(.text)
- *(.rodata)
- *(.rodata1)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0
- .kstrtab : { *(.kstrtab) }
+ /* . = VMLINUZ_LOAD_ADDRESS */
+ /* read-only */
+ _text = .; /* Text and read-only data */
+ .text : {
+ _ftext = . ;
+ *(.text)
+ *(.rodata)
+ } = 0
+ _etext = .; /* End of text section */
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ /* writable */
+ .data : { /* Data */
+ _fdata = . ;
+ *(.data)
+ /* Put the compressed image here, so bss is on the end. */
+ __image_begin = .;
+ *(.image)
+ __image_end = .;
+ CONSTRUCTORS
+ }
+ .sdata : { *(.sdata) }
+ . = ALIGN(4);
+ _edata = .; /* End of data section */
- __start___dbe_table = .; /* Exception table for data bus errors */
- __dbe_table : { *(__dbe_table) }
- __stop___dbe_table = .;
+ /* BSS */
+ __bss_start = .;
+ _fbss = .;
+ .sbss : { *(.sbss) *(.scommon) }
+ .bss : {
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ . = ALIGN(4);
+ _end = . ;
- __start___ksymtab = .; /* Kernel symbol table */
- __ksymtab : { *(__ksymtab) }
- __stop___ksymtab = .;
+ /* These are needed for ELF backends which have not yet been converted
+ * to the new style linker. */
- _etext = .;
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
+ /* These must appear regardless of . */
+ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- /* Startup code */
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(16);
- __setup_start = .;
- .setup.init : { *(.setup.init) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : { *(.initcall.init) }
- __initcall_end = .;
- . = ALIGN(4096); /* Align double page for init_task_union */
- __init_end = .;
-
- . = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- .fini : { *(.fini) } =0
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. It would
- be more correct to do this:
- . = .;
- The current expression does not correctly handle the case of a
- text segment ending precisely at the end of a page; it causes the
- data segment to skip a page. The above expression does not have
- this problem, but it will currently (2/95) cause BFD to allocate
- a single segment, combining both text and data, for this case.
- This will prevent the text segment from being shared among
- multiple executions of the program; I think that is more
- important than losing a page of the virtual address space (note
- that no actual memory is lost; the page which is skipped can not
- be referenced). */
- . = .;
- .data :
- {
- _fdata = . ;
- *(.data)
-
- /* Put the compressed image here, so bss is on the end. */
- __image_begin = .;
- *(.image)
- __image_end = .;
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(4096);
- __ramdisk_begin = .;
- *(.initrd)
- __ramdisk_end = .;
- . = ALIGN(4096);
-
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- _gp = . + 0x8000;
- .lit8 : { *(.lit8) }
- .lit4 : { *(.lit4) }
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- . = ALIGN(4);
- _edata = .;
- PROVIDE (edata = .);
-
- __bss_start = .;
- _fbss = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
- }
-
- /* Sections to be discarded */
- /DISCARD/ :
- {
- *(.text.exit)
- *(.data.exit)
- *(.exitcall.exit)
- }
-
- /* This is the MIPS specific mdebug section. */
- .mdebug : { *(.mdebug) }
- /* These are needed for ELF backends which have not yet been
- converted to the new style linker. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- /* DWARF debug sections.
- Symbols in the .debug DWARF section are relative to the beginning of the
- section so we begin .debug at 0. It's not clear yet what needs to happen
- for the others. */
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
- /* These must appear regardless of . */
- .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
- .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- .comment : { *(.comment) }
- .note : { *(.note) }
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.MIPS.options)
+ *(.options)
+ *(.pdr)
+ *(.reginfo)
+ *(.comment)
+ *(.note)
+ }
}
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 96110f2..0bf4bbe 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -50,6 +50,38 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+unsigned long long notrace sched_clock(void)
+{
+ /* 64-bit arithmatic can overflow, so use 128-bit. */
+#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3))
+ u64 t1, t2, t3;
+ unsigned long long rv;
+ u64 mult = clocksource_mips.mult;
+ u64 shift = clocksource_mips.shift;
+ u64 cnt = read_c0_cvmcount();
+
+ asm (
+ "dmultu\t%[cnt],%[mult]\n\t"
+ "nor\t%[t1],$0,%[shift]\n\t"
+ "mfhi\t%[t2]\n\t"
+ "mflo\t%[t3]\n\t"
+ "dsll\t%[t2],%[t2],1\n\t"
+ "dsrlv\t%[rv],%[t3],%[shift]\n\t"
+ "dsllv\t%[t1],%[t2],%[t1]\n\t"
+ "or\t%[rv],%[t1],%[rv]\n\t"
+ : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
+ : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
+ : "hi", "lo");
+ return rv;
+#else
+ /* GCC > 4.3 do it the easy way. */
+ unsigned int __attribute__((mode(TI))) t;
+ t = read_c0_cvmcount();
+ t = t * clocksource_mips.mult;
+ return (unsigned long long)(t >> clocksource_mips.shift);
+#endif
+}
+
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index b516442..ec3b2c4 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -97,26 +97,18 @@
void __init prom_init(void)
{
- int narg, indx, posn, nchr;
unsigned long memsz;
+ int argc, i;
char **argv;
memsz = fw_arg0 & 0x7fff0000;
- narg = fw_arg0 & 0x0000ffff;
+ argc = fw_arg0 & 0x0000ffff;
+ argv = (char **)fw_arg1;
- if (narg) {
- arcs_cmdline[0] = '\0';
- argv = (char **) fw_arg1;
- posn = 0;
- for (indx = 1; indx < narg; ++indx) {
- nchr = strlen(argv[indx]);
- if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
- break;
- if (posn)
- arcs_cmdline[posn++] = ' ';
- strcpy(arcs_cmdline + posn, argv[indx]);
- posn += nchr;
- }
+ for (i = 1; i < argc; i++) {
+ strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+ if (i < (argc - 1))
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
add_memory_region(0x0, memsz, BOOT_MEM_RAM);
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 09a59bc..1b1a7d1 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -24,7 +24,9 @@
#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid)
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&hub_data(node)->h_cpus)
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &hub_data(node)->h_cpus)
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 1854336..c56bf8a 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -362,8 +362,9 @@
pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 0824f6a..55f22a3 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -49,9 +49,6 @@
set_io_port_base(0xbfd00000);
serial_init();
-
- pr_info("Linux started...\n");
-
}
extern struct plat_smp_ops ssmtc_smp_ops;
@@ -60,7 +57,6 @@
{
set_io_port_base(0xbfd00000);
- pr_info("\nLINUX started...\n");
prom_meminit();
#ifdef CONFIG_MIPS_MT_SMP
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 9e8d003..1651942 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -424,7 +424,7 @@
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3d0baa4..badcf5e 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -73,9 +73,6 @@
enum label_id {
label_second_part = 1,
label_leave,
-#ifdef MODULE_START
- label_module_alloc,
-#endif
label_vmalloc,
label_vmalloc_done,
label_tlbw_hazard,
@@ -92,9 +89,6 @@
UASM_L_LA(_second_part)
UASM_L_LA(_leave)
-#ifdef MODULE_START
-UASM_L_LA(_module_alloc)
-#endif
UASM_L_LA(_vmalloc)
UASM_L_LA(_vmalloc_done)
UASM_L_LA(_tlbw_hazard)
@@ -818,8 +812,6 @@
} else {
#if defined(CONFIG_HUGETLB_PAGE)
const enum label_id ls = label_tlb_huge_update;
-#elif defined(MODULE_START)
- const enum label_id ls = label_module_alloc;
#else
const enum label_id ls = label_vmalloc;
#endif
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index f1b14c8..414f0c9 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -355,7 +355,6 @@
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
- pr_info("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
index 2c51671..0a0d73c 100644
--- a/arch/mips/powertv/Makefile
+++ b/arch/mips/powertv/Makefile
@@ -23,6 +23,6 @@
# under Linux.
#
-obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c
deleted file mode 100644
index 98d73cb..0000000
--- a/arch/mips/powertv/cmdline.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include "init.h"
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-void __init prom_init_cmdline(void)
-{
- int len;
-
- if (prom_argc != 1)
- return;
-
- len = strlen(arcs_cmdline);
-
- arcs_cmdline[len] = ' ';
-
- strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
- COMMAND_LINE_SIZE - len - 1);
-}
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
index 5f4e4c3..0afe227 100644
--- a/arch/mips/powertv/init.c
+++ b/arch/mips/powertv/init.c
@@ -34,10 +34,7 @@
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic.h>
-#include "init.h"
-
-int prom_argc;
-int *_prom_argv, *_prom_envp;
+static int *_prom_envp;
unsigned long _prom_memsize;
/*
@@ -109,16 +106,20 @@
void __init prom_init(void)
{
+ int prom_argc;
+ char *prom_argv;
+
prom_argc = fw_arg0;
- _prom_argv = (int *) fw_arg1;
+ prom_argv = (char *) fw_arg1;
_prom_envp = (int *) fw_arg2;
_prom_memsize = (unsigned long) fw_arg3;
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
- pr_info("\nLINUX started...\n");
- prom_init_cmdline();
+ if (prom_argc == 1)
+ strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
+
configure_platform();
prom_meminit();
diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h
index 7af6bf2..b194c34 100644
--- a/arch/mips/powertv/init.h
+++ b/arch/mips/powertv/init.h
@@ -22,7 +22,5 @@
#ifndef _POWERTV_INIT_H
#define _POWERTV_INIT_H
-extern int prom_argc;
-extern int *_prom_argv;
extern unsigned long _prom_memsize;
#endif
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index 28d0660..f49eb3d 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -42,8 +42,6 @@
#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */
#define PHYS_MEM_START 0x10000000 /* Start of physical memory */
-unsigned long ptv_memsize;
-
char __initdata cmdline[COMMAND_LINE_SIZE];
void __init prom_meminit(void)
@@ -87,9 +85,6 @@
}
}
- /* Store memsize for diagnostic purposes */
- ptv_memsize = memsize;
-
physend = PFN_ALIGN(&_end) - 0x80000000;
if (memsize > LOW_MEM_MAX) {
low_mem = LOW_MEM_MAX;
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
index bd8ebf1..698b1ea 100644
--- a/arch/mips/powertv/powertv_setup.c
+++ b/arch/mips/powertv/powertv_setup.c
@@ -64,9 +64,6 @@
#define REG_SIZE "4" /* In bytes */
#endif
-static struct pt_regs die_regs;
-static bool have_die_regs;
-
static void register_panic_notifier(void);
static int panic_handler(struct notifier_block *notifier_block,
unsigned long event, void *cause_string);
@@ -218,24 +215,6 @@
return NOTIFY_DONE;
}
-/**
- * Platform-specific handling of oops
- * @str: Pointer to the oops string
- * @regs: Pointer to the oops registers
- * All we do here is to save the registers for subsequent printing through
- * the panic notifier.
- */
-void platform_die(const char *str, const struct pt_regs *regs)
-{
- /* If we already have saved registers, don't overwrite them as they
- * they apply to the initial fault */
-
- if (!have_die_regs) {
- have_die_regs = true;
- die_regs = *regs;
- }
-}
-
/* Information about the RF MAC address, if one was supplied on the
* command line. */
static bool have_rfmac;
diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c
index 494c652..0007652 100644
--- a/arch/mips/powertv/reset.c
+++ b/arch/mips/powertv/reset.c
@@ -28,9 +28,6 @@
#include <asm/mach-powertv/asic_regs.h>
#include "reset.h"
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
static void mips_machine_restart(char *command)
{
#ifdef CONFIG_BOOTLOADER_DRIVER
@@ -44,22 +41,7 @@
#endif
}
-static void mips_machine_halt(void)
-{
-#ifdef CONFIG_BOOTLOADER_DRIVER
- /*
- * Call the bootloader's reset function to ensure
- * that persistent data is flushed before hard reset
- */
- kbldr_SetCauseAndReset();
-#else
- writel(0x1, asic_reg_addr(watchdog));
-#endif
-}
-
void mips_reboot_setup(void)
{
_machine_restart = mips_machine_restart;
- _machine_halt = mips_machine_halt;
- pm_power_off = mips_machine_halt;
}
diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c
index 1e0a5ef..9fd7b67 100644
--- a/arch/mips/powertv/time.c
+++ b/arch/mips/powertv/time.c
@@ -33,5 +33,4 @@
void __init plat_time_init(void)
{
powertv_clocksource_init();
- r4k_clockevent_init();
}
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index f61c164..bc12971 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -505,5 +505,5 @@
(num_physpages - tmp) << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 06e801c..e27809b 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -160,7 +160,6 @@
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
- static char builtin[COMMAND_LINE_SIZE] __initdata;
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
@@ -174,20 +173,6 @@
argv32 = (int *)fw_arg1;
}
- /* ignore all built-in args if any f/w args given */
- /*
- * But if built-in strings was started with '+', append them
- * to command line args. If built-in was started with '-',
- * ignore all f/w args.
- */
- builtin[0] = '\0';
- if (arcs_cmdline[0] == '+')
- strcpy(builtin, arcs_cmdline + 1);
- else if (arcs_cmdline[0] == '-') {
- strcpy(builtin, arcs_cmdline + 1);
- argc = 0;
- } else if (argc <= 1)
- strcpy(builtin, arcs_cmdline);
arcs_cmdline[0] = '\0';
for (i = 1; i < argc; i++) {
@@ -201,12 +186,6 @@
} else
strcat(arcs_cmdline, str);
}
- /* append saved builtin args */
- if (builtin[0]) {
- if (arcs_cmdline[0])
- strcat(arcs_cmdline, " ");
- strcat(arcs_cmdline, builtin);
- }
}
static int txx9_ic_disable __initdata;
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index 1386e6f..2391632 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
/*
* init.c, Common initialization routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
+ * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -66,9 +66,9 @@
argv = (char **)fw_arg1;
for (i = 1; i < argc; i++) {
- strcat(arcs_cmdline, argv[i]);
+ strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
if (i < (argc - 1))
- strcat(arcs_cmdline, " ");
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
}
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
index dd0c8ff..ac5c6bd 100644
--- a/arch/mn10300/Makefile
+++ b/arch/mn10300/Makefile
@@ -19,7 +19,7 @@
KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
LDFLAGS :=
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+OBJCOPYFLAGS := -O binary -R .note -R .comment -R .GCC-command-line -R .note.gnu.build-id -S
#LDFLAGS_vmlinux := -Map linkmap.txt
CHECKFLAGS +=
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
index 3acce23..441920d 100644
--- a/arch/mn10300/configs/asb2303_defconfig
+++ b/arch/mn10300/configs/asb2303_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 11:13:22 2009
+# Linux kernel version: 2.6.33-rc1
+# Tue Dec 22 19:26:25 2009
#
CONFIG_MN10300=y
CONFIG_AM33=y
@@ -22,6 +22,7 @@
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ=1000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -43,11 +44,10 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -62,7 +62,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -75,14 +74,22 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -90,6 +97,35 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -145,9 +181,8 @@
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Power management options
@@ -202,6 +237,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -216,6 +252,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -341,7 +378,6 @@
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -362,14 +398,11 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -430,11 +463,15 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -451,22 +488,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -490,11 +512,17 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# File systems
#
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -539,6 +567,7 @@
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
@@ -561,13 +590,13 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
@@ -577,7 +606,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
index 0b610f4..f49ac49 100644
--- a/arch/mn10300/include/asm/bitops.h
+++ b/arch/mn10300/include/asm/bitops.h
@@ -165,7 +165,7 @@
unsigned long __ffs(unsigned long x)
{
int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x) : "cc");
return bit;
}
@@ -177,7 +177,7 @@
int __ilog2_u32(u32 n)
{
int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n) : "cc");
return bit;
}
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
index 3a8329b..34dcb8e 100644
--- a/arch/mn10300/include/asm/div64.h
+++ b/arch/mn10300/include/asm/div64.h
@@ -72,6 +72,7 @@
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
+ : "cc"
);
return result;
@@ -92,6 +93,7 @@
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
+ : "cc"
);
return result;
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 6dc30fc..16d8857 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -466,7 +466,7 @@
* the kernel page tables containing the necessary information by tlb-mn10300.S
*/
extern void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
index 8214fb7..3636c05 100644
--- a/arch/mn10300/include/asm/system.h
+++ b/arch/mn10300/include/asm/system.h
@@ -143,6 +143,7 @@
" mov %0,epsw \n" \
: "=&d"(tmp) \
: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
+ : "cc" \
); \
} while (0)
diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h
index e023986..1a7e292 100644
--- a/arch/mn10300/include/asm/tlbflush.h
+++ b/arch/mn10300/include/asm/tlbflush.h
@@ -22,7 +22,7 @@
" mov %0,%1 \n" \
: "=d"(w) \
: "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
- : "memory" \
+ : "cc", "memory" \
); \
} while (0)
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 167e10f..197a7af 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -316,7 +316,7 @@
" .previous\n" \
: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
: "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
+ : "cc", "memory"); \
} \
} while (0)
@@ -352,7 +352,7 @@
" .previous\n" \
: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
: "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
+ : "cc", "memory"); \
} \
} while (0)
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index 2a98393..c05acb9 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -348,10 +348,11 @@
#define __NR_pwritev 335
#define __NR_rt_tgsigqueueinfo 336
#define __NR_perf_event_open 337
+#define __NR_recvmmsg 338
#ifdef __KERNEL__
-#define NR_syscalls 338
+#define NR_syscalls 339
/*
* specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index c9ee6c0..88e3e1c 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -724,6 +724,7 @@
.long sys_pwritev /* 335 */
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
+ .long sys_recvmmsg
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 229b710..ef34d5a 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -380,7 +380,8 @@
u32 epsw;
asm volatile(" bclr %1,(%2) \n"
" mov epsw,%0 \n"
- : "=d"(epsw) : "d"(mask), "a"(ptr));
+ : "=d"(epsw) : "d"(mask), "a"(ptr)
+ : "cc", "memory");
return !(epsw & EPSW_FLAG_Z);
}
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index a21f43b..717db14 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -264,7 +264,7 @@
/* this is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(sp))
+ if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
}
diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c
index 274f29e..b6580f5 100644
--- a/arch/mn10300/lib/checksum.c
+++ b/arch/mn10300/lib/checksum.c
@@ -22,6 +22,7 @@
" addc 0xffff,%0 \n"
: "=r" (sum)
: "r" (sum << 16), "0" (sum & 0xffff0000)
+ : "cc"
);
return sum >> 16;
}
diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c
index cce66bc..fdf6f71 100644
--- a/arch/mn10300/lib/delay.c
+++ b/arch/mn10300/lib/delay.c
@@ -28,7 +28,8 @@
"2: add -1,%0 \n"
" bne 2b \n"
: "=&d" (d0)
- : "0" (loops));
+ : "0" (loops)
+ : "cc");
}
EXPORT_SYMBOL(__delay);
diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c
index a75b203..7826e6c 100644
--- a/arch/mn10300/lib/usercopy.c
+++ b/arch/mn10300/lib/usercopy.c
@@ -62,7 +62,7 @@
" .previous" \
:"=&r"(res), "=r"(count), "=&r"(w) \
:"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \
- :"memory"); \
+ : "memory", "cc"); \
} while (0)
long
@@ -109,7 +109,7 @@
".previous\n" \
: "+r"(size), "=&r"(w) \
: "a"(addr), "d"(0) \
- : "memory"); \
+ : "memory", "cc"); \
} while (0)
unsigned long
@@ -161,6 +161,6 @@
".previous\n"
:"=d"(res), "=&r"(w)
:"0"(0), "a"(s), "r"(n)
- :"memory");
+ : "memory", "cc");
return res;
}
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index f3649d8..ee82d62 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -16,12 +16,24 @@
#include <linux/pci.h>
#include <asm/io.h>
+static unsigned long pci_sram_allocated = 0xbc000000;
+
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, int gfp)
{
unsigned long addr;
void *ret;
+ printk("dma_alloc_coherent(%s,%zu,,%x)\n", dev_name(dev), size, gfp);
+
+ if (0xbe000000 - pci_sram_allocated >= size) {
+ size = (size + 255) & ~255;
+ addr = pci_sram_allocated;
+ pci_sram_allocated += size;
+ ret = (void *) addr;
+ goto done;
+ }
+
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
@@ -41,7 +53,9 @@
/* write back and evict all cache lines covering this region */
mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+done:
*dma_handle = virt_to_bus((void *) addr);
+ printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle);
return ret;
}
EXPORT_SYMBOL(dma_alloc_coherent);
@@ -51,6 +65,9 @@
{
unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+ if (addr >= 0x9c000000)
+ return;
+
free_pages(addr, get_order(size));
}
EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index ec14205..dd27a9a 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -118,8 +118,7 @@
reservedpages << (PAGE_SHIFT - 10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
- );
+ totalhigh_pages << (PAGE_SHIFT - 10));
}
/*
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 3001625..6dffbf9 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -633,13 +633,13 @@
goto displace_or_inc;
case SD24:
tmp = disp << 8;
- asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp) : "cc");
disp = (long) tmp;
goto displace_or_inc;
case SIMM4_2:
tmp = opcode >> 4 & 0x0f;
tmp <<= 28;
- asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp) : "cc");
disp = (long) tmp;
goto displace_or_inc;
case IMM8:
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
index 31c9d27..36ba021 100644
--- a/arch/mn10300/mm/mmu-context.c
+++ b/arch/mn10300/mm/mmu-context.c
@@ -51,9 +51,10 @@
/*
* preemptively set a TLB entry
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
unsigned long pteu, ptel, cnx, flags;
+ pte_t pte = *ptep;
addr &= PAGE_MASK;
ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h
index 3bfc9093..8086cc0 100644
--- a/arch/mn10300/unit-asb2305/include/unit/serial.h
+++ b/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -11,7 +11,7 @@
#ifndef _ASM_UNIT_SERIAL_H
#define _ASM_UNIT_SERIAL_H
-#include <asm/cpu/cpu-regs.h>
+#include <asm/cpu-regs.h>
#include <proc/irq.h>
#include <linux/serial_reg.h>
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
index a71c49a..d1c72d5 100644
--- a/arch/mn10300/unit-asb2305/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -15,7 +15,7 @@
#include <linux/irq.h>
#endif /* __ASSEMBLY__ */
-#include <asm/cpu/timer-regs.h>
+#include <asm/timer-regs.h>
#include <unit/clock.h>
/*
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
index d345ff9..6f8de99 100644
--- a/arch/mn10300/unit-asb2305/leds.c
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -13,8 +13,8 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/processor.h>
-#include <asm/cpu/intctl-regs.h>
-#include <asm/cpu/rtc-regs.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
#include <unit/leds.h>
static const u8 asb2305_led_hex_tbl[16] = {
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index d100ca7..78cd134 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -218,45 +218,6 @@
pcibios_allocate_resources(1);
}
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
-
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = &dev->resource[idx];
-
- if (!r->start && r->end) {
- printk(KERN_ERR
- "PCI: Device %s not available because of"
- " resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
-
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
-
- if (cmd != old_cmd)
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- return 0;
-}
-
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
index 9763d1c..c3fa294 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.h
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -34,7 +34,6 @@
extern unsigned int pcibios_max_latency;
extern void pcibios_resource_survey(void);
-extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
/* pci.c */
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 07dbbcd..2cb7e75 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -27,6 +27,29 @@
struct pci_ops *pci_root_ops;
/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0xbe000000,
+ .end = 0xbe03ffff,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0xb8000000,
+ .end = 0xbbffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
* Functions for accessing PCI configuration space
*/
@@ -279,7 +302,7 @@
(x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
return 1;
- printk(KERN_ERROR "PCI: Sanity check failed\n");
+ printk(KERN_ERR "PCI: Sanity check failed\n");
return 0;
}
@@ -297,6 +320,7 @@
printk(KERN_INFO "PCI: Using configuration ampci\n");
request_mem_region(0xBE040000, 256, "AMPCI bridge");
request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+ request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");
return 0;
}
@@ -358,6 +382,11 @@
{
struct pci_dev *dev;
+ if (bus->number == 0) {
+ bus->resource[0] = &pci_ioport_resource;
+ bus->resource[1] = &pci_iomem_resource;
+ }
+
if (bus->self) {
pci_read_bridge_bases(bus);
pcibios_fixup_device_resources(bus->self);
@@ -380,6 +409,11 @@
iomem_resource.start = 0xA0000000;
iomem_resource.end = 0xDFFFFFFF;
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
if (!pci_probe)
return 0;
@@ -391,32 +425,11 @@
printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
MEM_PAGING_REG);
- {
-#if 0
- static struct pci_bus am33_root_bus = {
- .children = LIST_HEAD_INIT(am33_root_bus.children),
- .devices = LIST_HEAD_INIT(am33_root_bus.devices),
- .number = 0,
- .secondary = 0,
- .resource = { &ioport_resource, &iomem_resource },
- };
-
- am33_root_bus.ops = pci_root_ops;
- list_add_tail(&am33_root_bus.node, &pci_root_buses);
-
- am33_root_bus.subordinate = pci_do_scan_bus(0);
-
- pci_root_bus = &am33_root_bus;
-#else
- pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
-#endif
- }
+ pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
pcibios_irq_init();
pcibios_fixup_irqs();
-#if 0
pcibios_resource_survey();
-#endif
return 0;
}
@@ -440,7 +453,7 @@
{
int err;
- err = pcibios_enable_resources(dev, mask);
+ err = pci_enable_resources(dev, mask);
if (err == 0)
pcibios_enable_irq(dev);
return err;
@@ -455,6 +468,7 @@
bus->number = 0;
+ o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID, 4, &x);
o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
x |= PCI_COMMAND_MASTER |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index 1c452cc..a76c8e0 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -15,9 +15,8 @@
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/processor.h>
-#include <asm/cpu/intctl-regs.h>
-#include <asm/cpu/rtc-regs.h>
-#include <asm/cpu/serial-regs.h>
+#include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
#include <unit/serial.h>
/*
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index a27d2e2..01c1503 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -410,7 +410,7 @@
#define PG_dcache_dirty PG_arch_1
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index b6ed34d..1054baa 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -68,9 +68,9 @@
EXPORT_SYMBOL(flush_cache_all_local);
void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
- struct page *page = pte_page(pte);
+ struct page *page = pte_page(*ptep);
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 390512a..f4594ed 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -43,6 +43,9 @@
# cross-compilation prefix
CROSS=
+# mkimage wrapper script
+MKIMAGE=$srctree/scripts/mkuboot.sh
+
# directory for object and other files used by this script
object=arch/powerpc/boot
objbin=$object
@@ -267,7 +270,7 @@
case "$platform" in
uboot)
rm -f "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
@@ -327,7 +330,7 @@
;;
cuboot*)
gzip -f -9 "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 0396ce7..ff9bdb2 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:07 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,6 +219,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -243,6 +274,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -259,8 +291,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -273,6 +303,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -378,7 +409,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -489,6 +526,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -587,8 +628,8 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -643,6 +684,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -688,7 +730,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -735,11 +776,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -797,7 +840,6 @@
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1137,6 +1179,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1180,7 +1223,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index f5c07fd..7b3f4d0 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -86,6 +88,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
@@ -196,6 +226,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -252,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -285,6 +315,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -398,7 +429,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -433,6 +470,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -443,6 +484,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -450,6 +492,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -502,7 +545,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -541,6 +586,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -596,15 +642,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -726,8 +773,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -741,6 +790,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -778,6 +828,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -836,11 +887,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -849,7 +895,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -884,11 +929,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1129,6 +1176,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1172,7 +1220,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 4f77a1b..eaae2d4 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:08 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,6 +219,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -244,6 +275,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +292,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -274,6 +304,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -379,7 +410,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -490,6 +527,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -499,9 +540,11 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -610,8 +653,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,6 +699,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -700,7 +743,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -745,6 +787,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -805,11 +848,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -881,6 +926,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -902,7 +948,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1172,6 +1220,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1215,7 +1264,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index f9168c1..1742c02 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:10 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -195,6 +225,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -251,6 +282,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +299,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,7 +415,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -585,15 +621,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -673,8 +710,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -697,6 +737,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -734,6 +775,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -791,11 +833,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -804,7 +841,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -839,11 +875,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -908,7 +946,6 @@
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1011,6 +1048,7 @@
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1032,7 +1070,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1243,10 +1283,11 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -1269,7 +1310,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 75c835c..3972438 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:23 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +174,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -194,6 +224,7 @@
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -249,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -279,6 +309,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -384,7 +415,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -496,6 +533,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -607,8 +648,8 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -663,6 +704,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -708,7 +750,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -753,6 +794,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -818,11 +860,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -880,7 +924,6 @@
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -984,6 +1027,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1005,7 +1049,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1275,6 +1321,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1318,7 +1365,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 466f09a..baa2bbb 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -530,6 +556,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -541,6 +571,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -548,6 +579,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -581,7 +613,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -668,8 +700,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +726,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -700,6 +736,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -751,6 +788,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -807,11 +845,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +853,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +898,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -904,6 +937,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
@@ -942,11 +976,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -996,6 +1032,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1101,6 +1138,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1122,7 +1160,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1347,7 +1387,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1374,7 +1414,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 6694fb7..8b1aa80 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:21 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +171,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -253,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,7 +413,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -512,6 +547,10 @@
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -581,8 +620,7 @@
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -652,6 +690,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -697,7 +736,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -732,11 +770,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -933,7 +973,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -963,7 +1003,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 86df19f..2f2d985 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:22 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:15 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -544,6 +570,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +648,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -653,6 +688,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -680,7 +716,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -805,8 +841,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -829,6 +868,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -838,6 +878,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -890,6 +931,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -947,11 +989,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -960,7 +997,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,6 +1011,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1022,6 +1060,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1062,6 +1101,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1099,6 +1139,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1106,6 +1147,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1173,6 +1216,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1287,15 +1331,17 @@
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1336,6 +1382,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1365,7 +1412,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1676,7 +1725,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 7bf71d5..633e611 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:23 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:16 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -544,6 +570,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +648,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -654,6 +689,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -709,15 +745,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -744,7 +781,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -869,8 +906,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -893,6 +933,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -902,6 +943,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -954,6 +996,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1011,11 +1054,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1024,7 +1062,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1039,6 +1076,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1086,6 +1125,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1166,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1163,6 +1204,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1170,6 +1212,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1237,6 +1281,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,15 +1396,17 @@
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1400,6 +1447,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1429,7 +1477,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1740,7 +1790,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 7def835..0b4262b 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:17 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -444,6 +470,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -454,6 +484,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -461,6 +492,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -513,7 +545,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -568,7 +603,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -675,8 +710,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -690,6 +727,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -699,6 +737,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -751,6 +790,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -807,11 +847,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +855,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +900,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -904,6 +939,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -936,11 +972,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1023,6 +1061,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1044,7 +1083,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1220,7 +1261,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1247,7 +1288,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index b398b9b..155af00 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:18 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -445,6 +471,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -456,6 +486,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -463,6 +494,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -474,6 +507,7 @@
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -516,7 +550,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -554,6 +590,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -571,7 +608,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -680,8 +717,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +744,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -713,6 +754,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -766,6 +808,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -825,11 +868,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -838,7 +876,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -852,6 +889,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -899,6 +938,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -939,6 +979,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -976,6 +1017,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -983,6 +1025,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1050,6 +1094,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1387,7 +1432,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1414,7 +1459,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index f67317e..ff45f49 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:25 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:19 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -528,6 +554,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -647,7 +680,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -686,6 +721,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -741,15 +777,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
@@ -777,7 +814,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -860,8 +897,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -884,6 +924,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -925,6 +966,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -982,11 +1024,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -995,7 +1032,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1009,6 +1045,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1062,6 +1100,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1069,6 +1108,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1117,6 +1158,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1235,6 +1277,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1264,7 +1307,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1485,7 +1530,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1512,7 +1557,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index a668110..28d8ff3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:26 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:20 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -528,6 +554,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -599,7 +632,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -637,6 +672,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -654,7 +690,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -737,8 +773,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +800,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -802,6 +842,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -859,11 +900,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -872,7 +908,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -886,6 +921,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -939,6 +976,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -946,6 +984,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -994,6 +1034,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1112,6 +1153,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1141,7 +1183,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1362,7 +1406,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1389,7 +1433,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c4e92ba..6252ab5 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:27 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -443,6 +469,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -493,7 +525,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -616,8 +648,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -630,6 +664,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -639,6 +674,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -690,6 +726,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -745,11 +782,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -758,7 +790,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -804,6 +835,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -842,6 +874,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -874,11 +907,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -961,6 +996,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -982,7 +1018,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1156,7 +1194,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1183,7 +1221,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 4f434b1..7822737 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:28 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -258,6 +288,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -402,9 +431,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -525,6 +551,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -535,6 +565,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -594,7 +626,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -632,6 +666,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -649,7 +684,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -756,8 +791,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -771,6 +808,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -780,6 +818,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -832,6 +871,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -888,11 +928,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -901,7 +936,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -947,6 +981,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -985,6 +1020,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1017,11 +1053,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1104,6 +1142,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1125,7 +1164,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1302,7 +1343,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1329,7 +1370,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b52ec08..9451d6e 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:23 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -258,6 +288,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -539,6 +565,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -549,6 +579,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -556,6 +587,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -590,7 +623,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -657,8 +690,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -671,6 +706,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -680,6 +716,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -737,6 +774,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -795,11 +833,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -808,7 +841,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -823,6 +855,8 @@
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -854,6 +888,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -903,6 +938,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -910,6 +946,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1199,7 +1237,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1230,6 +1268,7 @@
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
@@ -1237,7 +1276,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 7300615..f67b70d 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:29 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:22 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -443,6 +469,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -512,7 +544,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -606,15 +641,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -631,7 +667,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -736,8 +772,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -751,6 +789,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -760,6 +799,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -811,6 +851,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -868,11 +909,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -881,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -927,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -965,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -997,11 +1034,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1226,7 +1265,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1253,7 +1292,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 9e9158a..a84fd11 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:24 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -398,9 +427,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -438,6 +464,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -449,6 +479,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -456,6 +487,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -507,7 +539,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -546,6 +580,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -601,15 +636,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -638,7 +674,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -725,8 +761,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -749,6 +788,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -758,6 +798,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -809,6 +850,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -867,11 +909,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -880,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -926,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -964,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1001,11 +1039,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1097,6 +1137,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1385,7 +1426,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1412,7 +1453,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 6b39915..72c2067 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:31 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:25 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -257,6 +287,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +304,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -401,9 +430,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -524,6 +550,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -535,6 +565,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -604,7 +636,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -691,8 +723,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -715,6 +750,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -724,6 +760,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -775,6 +812,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -833,11 +871,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -846,7 +879,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -892,6 +924,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -930,6 +963,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -967,11 +1001,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1039,6 +1075,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1321,7 +1358,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1348,7 +1385,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index a5bde8d..21dad38 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:32 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:26 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -248,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -503,6 +531,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -603,8 +635,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +655,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -669,6 +701,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1051,7 +1084,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index c10e26f..5db54cd 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:33 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:27 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +174,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -186,7 +217,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -205,6 +236,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -249,6 +281,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +298,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -386,9 +417,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -423,6 +451,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -500,8 +532,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -521,6 +552,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -570,6 +602,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -920,7 +953,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 8d9f0a4..76c7018 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:34 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:28 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,7 +220,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
@@ -208,6 +239,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -398,9 +429,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -440,6 +468,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -485,7 +517,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -594,8 +626,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +642,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -617,6 +652,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -664,6 +700,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -705,6 +742,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1054,7 +1092,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 9b63e25..fab8ada 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:35 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -250,6 +282,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -266,8 +299,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -396,9 +427,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -437,6 +465,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -537,7 +569,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -642,8 +674,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -656,6 +690,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -665,6 +700,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -717,6 +753,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1079,7 +1116,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 1b23568..8290385 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:36 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -392,9 +423,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -431,6 +459,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -476,7 +508,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -581,8 +613,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -595,6 +629,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -604,6 +639,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -656,6 +692,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -889,7 +926,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -915,7 +952,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 959d028..2499b5b 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:30 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
CONFIG_SBC8560=y
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -421,6 +449,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -498,8 +530,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -519,6 +550,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -568,6 +600,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -702,7 +735,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -948,6 +983,7 @@
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
@@ -955,7 +991,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 7f5ec35..e2edb79 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:31 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +178,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -190,7 +221,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -209,6 +240,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +435,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -540,6 +568,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -551,6 +583,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -558,6 +591,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -621,7 +656,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -710,8 +745,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,6 +772,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -743,6 +782,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -768,6 +808,7 @@
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -826,6 +867,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -883,11 +925,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -896,7 +933,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,6 +946,8 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -957,6 +995,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -997,6 +1036,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1015,6 +1055,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1022,6 +1063,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1192,6 +1235,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1318,6 +1362,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1347,7 +1392,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1574,7 +1621,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1600,7 +1647,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index c8327e8..ce31325 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:38 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:32 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -178,14 +182,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -194,7 +225,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -213,6 +244,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -257,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -463,9 +494,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -513,6 +541,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -523,6 +555,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -530,6 +563,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -633,7 +667,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -673,6 +709,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -690,7 +727,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -797,8 +834,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +852,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -822,6 +862,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -881,6 +922,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -905,6 +947,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -970,11 +1013,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -983,7 +1021,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1016,6 +1053,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1058,6 +1096,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1097,6 +1136,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1115,7 +1155,6 @@
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
@@ -1465,7 +1504,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 82563703..0824b46 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:39 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:33 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -248,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -391,9 +422,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -510,6 +538,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -520,6 +552,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -527,6 +560,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +649,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -738,8 +772,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -752,6 +788,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -761,6 +798,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -813,6 +851,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -871,11 +910,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -883,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -929,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -985,11 +1020,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1220,7 +1257,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1246,7 +1283,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 91d85d73..2137be4 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:40 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:34 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index debe268..5cc89aa 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:41 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:35 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -177,14 +181,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -193,7 +224,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -212,6 +243,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -257,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -406,7 +437,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -535,6 +572,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -545,6 +586,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -552,6 +594,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -585,7 +628,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -690,8 +733,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +749,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -713,6 +759,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -765,6 +812,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -820,11 +868,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -833,7 +876,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -879,6 +921,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -917,6 +960,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -935,11 +979,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1003,6 +1049,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1024,7 +1071,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1280,7 +1329,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 7451550..e7b9148 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:42 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 631d92b..a998e40 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:43 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
CONFIG_TQM8560=y
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 52acbac..fc656af 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:44 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:37 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -198,7 +229,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -217,6 +248,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -261,6 +293,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,6 +435,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,7 +473,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -576,6 +614,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -587,6 +629,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -594,6 +637,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -646,7 +690,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -685,6 +731,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -740,15 +787,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -765,7 +813,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -852,8 +900,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +927,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -885,6 +937,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -914,6 +967,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -950,6 +1004,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1007,11 +1062,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1020,7 +1070,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1053,6 +1102,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1095,6 +1145,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1134,6 +1185,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1172,11 +1224,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1368,6 +1422,7 @@
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -1391,7 +1446,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1420,6 +1474,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1441,7 +1496,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1772,7 +1829,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 6cd2cd6..a85f927 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:49 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:43 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -259,6 +290,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -689,7 +731,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -785,15 +830,16 @@
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -810,7 +856,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -897,8 +943,14 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -937,6 +989,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -946,6 +999,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1005,6 +1059,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1070,11 +1125,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1083,7 +1133,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1115,6 +1164,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1157,6 +1207,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1196,6 +1247,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1235,11 +1287,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1338,6 +1392,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1464,6 +1519,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1485,7 +1541,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1710,7 +1768,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1737,7 +1795,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a6a3768..eb58dec 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:47 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:41 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -259,6 +290,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -689,7 +731,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -753,7 +798,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -840,8 +885,14 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -880,6 +931,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -889,6 +941,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -948,6 +1001,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1013,11 +1067,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1026,7 +1075,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1058,6 +1106,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1100,6 +1149,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1189,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1178,11 +1229,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,6 +1334,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1407,6 +1461,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1428,7 +1483,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1653,7 +1710,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1680,7 +1737,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1975d41..4554d9b 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:48 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:42 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +291,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -400,6 +430,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -588,9 +619,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -719,6 +747,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -730,6 +762,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -737,6 +770,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -789,7 +823,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -828,6 +864,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -883,15 +920,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -908,7 +946,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -995,8 +1033,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1091,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -1059,6 +1101,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1117,6 +1160,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1174,11 +1218,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1187,7 +1226,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1220,6 +1258,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1262,6 +1301,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1301,6 +1341,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1340,11 +1381,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1443,6 +1486,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1570,6 +1614,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1591,7 +1636,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1891,9 +1938,12 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index de4d525..aab3bae 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:39 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +180,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -254,6 +285,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -270,8 +302,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -382,6 +412,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -420,9 +451,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -555,6 +583,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -565,6 +597,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -572,6 +605,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -671,7 +705,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -710,6 +746,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -765,15 +802,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -790,7 +828,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -838,8 +876,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +893,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -862,6 +903,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -891,6 +933,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -927,6 +970,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -981,11 +1025,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -994,7 +1033,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1029,11 +1067,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1163,6 +1203,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1282,6 +1323,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1303,7 +1345,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1606,7 +1650,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 754a79b..727a8c8 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:46 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:40 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +291,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -395,6 +425,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -439,9 +470,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -483,6 +511,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -494,6 +526,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -501,6 +534,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -554,7 +588,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -593,6 +629,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -648,15 +685,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -673,7 +711,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -778,8 +816,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +843,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -811,6 +853,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -840,6 +883,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -876,6 +920,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -932,11 +977,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -945,7 +985,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -980,11 +1019,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1059,6 +1100,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1186,6 +1228,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1312,6 +1355,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1333,7 +1377,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1648,7 +1694,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 89991f1..4fb04dd 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:38 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,6 +166,7 @@
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -182,14 +187,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +292,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +309,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -399,6 +430,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -587,9 +619,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -717,6 +746,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -727,6 +760,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -734,6 +768,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -786,7 +821,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -873,8 +908,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -918,6 +955,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -927,6 +965,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -985,6 +1024,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1042,11 +1082,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1055,7 +1090,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1101,6 +1135,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1174,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1171,11 +1207,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,7 +1319,6 @@
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
@@ -1556,8 +1593,12 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 052cf13..5c1dc76 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:04 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:58 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -55,6 +56,7 @@
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -82,6 +84,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -242,6 +272,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -258,8 +289,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -373,9 +402,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -546,8 +572,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -567,6 +592,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -615,6 +641,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -637,6 +664,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -898,6 +926,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -943,7 +972,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 0fb65a8..72137cd 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:05 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,6 +176,7 @@
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -192,14 +196,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -224,6 +255,8 @@
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -286,6 +319,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -296,14 +330,12 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -316,6 +348,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -424,6 +457,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -687,10 +721,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
@@ -773,7 +803,6 @@
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -817,6 +846,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -870,7 +903,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
+# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
@@ -925,6 +960,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -942,7 +978,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -1027,8 +1063,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1054,6 +1093,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -1063,6 +1103,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1121,8 +1162,6 @@
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
@@ -1140,6 +1179,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1200,11 +1240,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1213,7 +1248,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1259,6 +1293,7 @@
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -1297,6 +1332,7 @@
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1333,7 +1369,6 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
@@ -1392,6 +1427,7 @@
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
@@ -1923,7 +1959,6 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
@@ -1934,6 +1969,11 @@
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ef5edc7..7910541 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:06 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -160,14 +163,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -237,6 +267,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -249,8 +280,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -400,9 +429,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -523,6 +549,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -553,7 +583,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -658,8 +688,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -670,6 +701,7 @@
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -705,6 +737,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -741,6 +774,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1061,7 +1095,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 73ef9be..58f7ca7 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:07 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:00 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -241,6 +271,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -257,8 +288,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -372,9 +401,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -545,8 +571,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -591,6 +616,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -851,6 +877,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -893,7 +920,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 63c3e8d..9a0c981 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:08 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:01 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +88,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +184,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -215,6 +245,8 @@
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -261,6 +293,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -517,10 +548,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
@@ -650,6 +677,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -661,6 +692,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -668,6 +700,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -720,7 +753,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -759,6 +794,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -814,15 +850,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -839,7 +876,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -934,8 +971,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -960,6 +1000,7 @@
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -969,6 +1010,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1007,6 +1049,7 @@
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -1039,6 +1082,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1096,11 +1140,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1109,7 +1148,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1155,6 +1193,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1193,6 +1232,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1211,11 +1251,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,6 +1323,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1454,6 +1497,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1475,7 +1519,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1786,7 +1832,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 520b04a..4c2c877 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:09 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:02 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,7 +60,6 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -208,7 +236,8 @@
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
@@ -250,6 +279,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +292,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -395,9 +423,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -525,6 +550,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -558,7 +587,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -625,8 +654,9 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -637,6 +667,7 @@
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -673,6 +704,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -734,11 +766,6 @@
# CONFIG_I2C_PARPORT_LIGHT is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -775,6 +802,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -807,11 +835,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1118,7 +1148,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 43c3c4f..9e090f2 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:03 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,14 +165,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -244,6 +274,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +291,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -497,6 +523,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -568,8 +598,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -614,6 +643,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -863,6 +893,7 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -887,7 +918,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 523d5fe..61cf73d 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:21 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 15:08:52 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
@@ -193,6 +223,7 @@
CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -211,6 +242,7 @@
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
+# CONFIG_PPC_RTAS_DAEMON is not set
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
@@ -223,6 +255,7 @@
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=m
CONFIG_SIMPLE_GPIO=y
#
@@ -253,6 +286,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +303,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -286,6 +318,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -399,7 +432,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -530,6 +569,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -541,6 +584,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -548,6 +592,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -600,7 +646,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -639,6 +687,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -694,15 +743,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
@@ -785,8 +835,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -809,6 +862,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -818,6 +872,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -874,6 +929,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -934,11 +990,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -947,7 +998,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -962,7 +1012,10 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_MPC52xx is not set
CONFIG_SPI_MPC52xx_PSC=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -995,6 +1048,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1042,6 +1096,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1083,6 +1138,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1122,6 +1178,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1129,6 +1186,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1322,7 +1381,6 @@
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1440,6 +1498,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1469,7 +1528,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1731,6 +1792,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1774,7 +1836,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index d8b364a..1315b77 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:04 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -199,6 +229,8 @@
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -244,6 +276,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +293,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -424,6 +452,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -487,7 +519,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -526,6 +560,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -580,15 +615,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -605,7 +641,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -731,8 +767,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -746,6 +784,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -755,6 +794,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -806,6 +846,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1091,7 +1132,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1118,7 +1159,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 00fad81..9073778 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:11 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:05 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -240,6 +270,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -252,8 +283,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -526,6 +552,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -556,7 +586,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -661,8 +691,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -679,6 +710,7 @@
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -688,6 +720,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -740,6 +773,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -763,6 +797,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -799,6 +834,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1131,7 +1167,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 64dff21..05bec48 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:12 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +179,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -266,6 +296,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -282,8 +313,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -413,9 +442,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -548,6 +574,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -559,6 +589,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -566,6 +597,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -618,7 +650,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +691,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -712,15 +747,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -737,7 +773,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -844,8 +880,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -868,6 +907,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -877,6 +917,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -929,6 +970,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -989,11 +1031,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1002,7 +1039,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1034,6 +1070,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1076,6 +1113,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1115,6 +1153,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1153,11 +1192,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1249,6 +1290,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1542,7 +1584,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1569,7 +1611,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a12e7ba..8f35f80 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:25:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +95,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -184,14 +188,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -201,7 +232,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
@@ -220,6 +251,7 @@
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -267,6 +299,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -283,8 +316,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -405,6 +436,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -449,9 +481,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -494,6 +523,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -505,6 +538,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -512,6 +546,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -565,7 +600,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -604,6 +641,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -659,15 +697,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -684,7 +723,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -795,8 +834,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -820,6 +862,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -829,6 +872,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -858,6 +902,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -896,6 +941,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -956,11 +1002,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -969,7 +1010,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1002,6 +1042,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1035,11 +1076,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1114,6 +1157,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1241,6 +1285,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1347,7 +1392,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1376,6 +1420,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1397,7 +1442,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1731,7 +1778,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index cd70b4a..8755ea3 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:26:01 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:07 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -187,14 +191,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -204,7 +235,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
@@ -223,6 +254,7 @@
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -271,6 +303,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -287,8 +320,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -409,6 +440,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -453,9 +485,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -498,6 +527,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -509,6 +542,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -516,6 +550,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -569,7 +604,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -608,6 +645,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -663,15 +701,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -688,7 +727,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -799,8 +838,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -824,6 +866,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -833,6 +876,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -862,6 +906,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -900,6 +945,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -960,11 +1006,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -973,7 +1014,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1006,6 +1046,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1039,11 +1080,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1118,6 +1161,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1245,6 +1289,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,7 +1396,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1380,6 +1424,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1401,7 +1446,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1735,7 +1782,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 40d6f05..3f6b11b 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:15 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:08 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -158,14 +161,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -240,6 +270,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -256,8 +287,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -375,9 +404,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -407,6 +433,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -485,8 +515,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -506,6 +535,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -554,6 +584,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -576,6 +607,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -855,6 +887,7 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -876,7 +909,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5b3abb4..41884c9 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:16 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:09 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -183,14 +187,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -221,7 +252,7 @@
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
@@ -262,6 +293,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -278,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -397,6 +427,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,9 +472,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -486,6 +514,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -497,6 +529,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -504,6 +537,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -557,7 +591,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -596,6 +632,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -651,15 +688,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -676,7 +714,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -781,8 +819,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -805,6 +846,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -814,6 +856,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -843,6 +886,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -879,6 +923,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -936,11 +981,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -949,7 +989,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -982,6 +1021,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1015,11 +1055,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1094,6 +1136,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1221,6 +1264,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1348,6 +1392,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1369,7 +1414,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1684,7 +1731,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 1da3488..6b9e6bd 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:10 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -248,6 +278,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +295,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -556,8 +582,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -602,6 +627,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -862,6 +888,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -904,7 +931,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index b791121..5d06f2c 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:11 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -165,14 +168,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -243,6 +273,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -255,8 +286,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -407,9 +436,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -530,6 +556,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -616,7 +646,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -721,8 +751,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,6 +770,7 @@
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -748,6 +780,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -802,6 +835,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -825,6 +859,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -861,6 +896,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -955,10 +991,12 @@
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1248,7 +1286,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index ef50ce4..57ab574 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:18 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:12 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -175,14 +178,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -207,6 +237,8 @@
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -518,6 +546,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -529,6 +561,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -536,6 +569,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -641,7 +675,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -680,6 +716,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -734,15 +771,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -759,7 +797,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -886,8 +924,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -910,6 +951,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -919,6 +961,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -973,6 +1016,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1030,11 +1074,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1042,7 +1081,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1088,6 +1126,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1165,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1144,11 +1184,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1250,6 +1292,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
@@ -1362,6 +1405,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1383,7 +1427,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1626,7 +1672,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 5242631..f2f8321 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:19 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:13 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -201,6 +231,8 @@
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -246,6 +278,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +295,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -507,6 +535,10 @@
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -515,6 +547,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -522,6 +555,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -628,7 +662,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -666,6 +702,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -695,7 +732,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -741,8 +778,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -765,6 +805,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -805,6 +846,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -862,11 +904,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -875,7 +912,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,11 +946,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -963,6 +1001,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1087,6 +1126,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1108,7 +1148,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1322,7 +1364,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1349,7 +1391,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 21207e5..89f1587 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -209,7 +209,7 @@
* corresponding HPTE into the hash table ahead of time, instead of
* waiting for the inevitable extra hash-table miss exception.
*/
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr);
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 22f738d..bbf8970 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -17,7 +17,9 @@
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &numa_cpumask_lookup_table[node])
int of_node_to_nid(struct device_node *device);
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 678f98c..3ef743f 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -542,11 +542,11 @@
FixupDAR:/* Entry point for dcbx workaround. */
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
+ andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
DO_8xx_CPU6(0x3780, r3)
mtspr SPRN_MD_EPN, r10
mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
- cmplwi cr0, r11, 0x0800
- blt- 3f /* Branch if user space */
+ beq- 3f /* Branch if user space */
lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
@@ -768,12 +768,12 @@
*/
initial_mmu:
tlbia /* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
+/* Always pin the first 8 MB ITLB to prevent ITLB
+ misses while mucking around with SRR0/SRR1 in asm
+*/
lis r8, MI_RSV4I@h
ori r8, r8, 0x1c00
-#else
- li r8, 0
-#endif
+
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
#ifdef CONFIG_PIN_TLB
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 1be9fe3..8777fb0 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -262,19 +262,19 @@
if (rtas_node == NULL)
return -ENODEV;
- proc_create("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/progress", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_progress_operations);
- proc_create("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/clock", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_clock_operations);
- proc_create("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_poweron_operations);
- proc_create("ppc64/rtas/sensors", S_IRUGO, NULL,
+ proc_create("powerpc/rtas/sensors", S_IRUGO, NULL,
&ppc_rtas_sensors_operations);
- proc_create("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_freq_operations);
- proc_create("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/volume", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_volume_operations);
- proc_create("ppc64/rtas/rmo_buffer", S_IRUSR, NULL,
+ proc_create("powerpc/rtas/rmo_buffer", S_IRUSR, NULL,
&ppc_rtas_rmo_buf_ops);
return 0;
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index a521fb8..c2ee144 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -619,4 +619,16 @@
if (smp_ops->cpu_die)
smp_ops->cpu_die(cpu);
}
+
+static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+ mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+ mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
+}
#endif
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index b47d8ce..b0754e2 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -303,7 +303,7 @@
lis r4,0x1000
1: addic. r4,r4,-0x1000
tlbie r4
- blt 1b
+ bgt 1b
sync
/* restore the MSR and turn on the MMU */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9ba2cc8..6c6093d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -903,12 +903,21 @@
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
+static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
+ int shift)
+{
+ uint64_t tmp = ((uint64_t)ticks) << shift;
+
+ do_div(tmp, nsec);
+ return tmp;
+}
+
static void __init setup_clockevent_multiplier(unsigned long hz)
{
u64 mult, shift = 32;
while (1) {
- mult = div_sc(hz, NSEC_PER_SEC, shift);
+ mult = div_sc64(hz, NSEC_PER_SEC, shift);
if (mult && (mult >> 32UL) == 0UL)
break;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index b9b1525..311224c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -494,13 +494,13 @@
* This must always be called with the pte lock held.
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+ pte_t *ptep)
{
#ifdef CONFIG_PPC_STD_MMU
unsigned long access = 0, trap;
/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
- if (!pte_young(pte) || address >= TASK_SIZE)
+ if (!pte_young(*ptep) || address >= TASK_SIZE)
return;
/* We try to figure out if we are coming from an instruction
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 0d957a4..5a783d8 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -47,7 +47,7 @@
if (current->personality & ADDR_COMPAT_LAYOUT)
return 1;
- if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+ if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
return 1;
return sysctl_legacy_va_layout;
@@ -77,7 +77,7 @@
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index c4d4a19..eea1202 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -54,7 +54,7 @@
*/
static int spufs_dump_write(struct file *file, const void *addr, int nr, loff_t *foffset)
{
- unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+ unsigned long limit = rlimit(RLIMIT_CORE);
ssize_t written;
if (*foffset + nr > limit)
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index 657b72f..2aa8b56 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -474,6 +474,8 @@
struct vio_waitevent we;
int ret;
+ init_completion(&we.com);
+
ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2);
if (ret) {
printk(KERN_WARNING "get_viotape_info: "
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 67b7a10..37bce52 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -236,7 +236,9 @@
int dlpar_attach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct proc_dir_entry *ent;
+#endif
int rc;
of_node_set_flag(dn, OF_DYNAMIC);
@@ -267,10 +269,10 @@
int dlpar_detach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct device_node *parent = dn->parent;
struct property *prop = dn->properties;
-#ifdef CONFIG_PROC_DEVICETREE
while (prop) {
remove_proc_entry(prop->name, dn->pde);
prop = prop->next;
@@ -344,20 +346,6 @@
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
-
-void cpu_hotplug_driver_lock(void)
-__acquires(pseries_cpu_hotplug_mutex)
-{
- mutex_lock(&pseries_cpu_hotplug_mutex);
-}
-
-void cpu_hotplug_driver_unlock(void)
-__releases(pseries_cpu_hotplug_mutex)
-{
- mutex_unlock(&pseries_cpu_hotplug_mutex);
-}
-
static int dlpar_online_cpu(struct device_node *dn)
{
int rc = 0;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index b9b9e11..d80f193c 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -163,14 +163,13 @@
/* Interface to generic irq subsystem */
#ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
int server;
/* For the moment only implement delivery to all cpus or one cpu */
- cpumask_t cpumask;
cpumask_t tmp = CPU_MASK_NONE;
- cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
if (!distribute_irqs)
return default_server;
@@ -192,7 +191,8 @@
return default_server;
}
#else
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
return default_server;
}
@@ -211,7 +211,7 @@
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
- server = get_irq_server(virq, 0);
+ server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0);
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
@@ -405,7 +405,7 @@
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- irq_server = get_irq_server(virq, 1);
+ irq_server = get_irq_server(virq, *cpumask, 1);
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index efb74fd..b1066b9 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -52,6 +52,10 @@
unreachable(); \
} while (0)
+#define __WARN() do { \
+ __EMIT_BUG(BUGFLAG_WARNING); \
+} while (0)
+
#define WARN_ON(x) ({ \
int __ret_warn_on = !!(x); \
if (__builtin_constant_p(__ret_warn_on)) { \
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index e2fa79c..9b5b918 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -43,7 +43,7 @@
* The S390 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/*
* ZERO_PAGE is a global shared page that is always zero: used
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
index ec403d4..f72d611 100644
--- a/arch/s390/include/asm/sigp.h
+++ b/arch/s390/include/asm/sigp.h
@@ -15,11 +15,19 @@
#ifndef __SIGP__
#define __SIGP__
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
+#include <asm/system.h>
/* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
+extern int __cpu_logical_map[];
+
+static inline int cpu_logical_map(int cpu)
+{
+#ifdef CONFIG_SMP
+ return __cpu_logical_map[cpu];
+#else
+ return stap();
+#endif
+}
typedef enum
{
@@ -79,7 +87,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
@@ -98,7 +106,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
@@ -118,7 +126,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode), "+d" (reg1)
- : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+ : "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
: "cc" , "memory");
*statusptr = reg1;
return ccode;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 07eb61b..66069e7 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -93,13 +93,12 @@
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
-#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
-#define TIF_31BIT 18 /* 32bit process */
-#define TIF_MEMDIE 19
-#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */
-#define TIF_FREEZE 21 /* thread is freezing for suspend */
+#define TIF_31BIT 17 /* 32bit process */
+#define TIF_MEMDIE 18
+#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */
+#define TIF_FREEZE 20 /* thread is freezing for suspend */
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
@@ -112,7 +111,6 @@
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
#define _TIF_FREEZE (1<<TIF_FREEZE)
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 192a720..6e9f049 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -269,8 +269,7 @@
#define __NR_pwritev 329
#define __NR_rt_tgsigqueueinfo 330
#define __NR_perf_event_open 331
-#define __NR_recvmmsg 332
-#define NR_syscalls 333
+#define NR_syscalls 332
/*
* There are some system calls that are not present on 64 bit, some
@@ -377,6 +376,9 @@
#define __IGNORE_migrate_pages
#define __IGNORE_move_pages
+/* Ignore system calls that are also reachable via sys_socket */
+#define __IGNORE_recvmmsg
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_SYS_ALARM
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 22c9e55..11c3aba 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -616,44 +616,35 @@
*/
struct mmap_arg_struct_emu31 {
- u32 addr;
- u32 len;
- u32 prot;
- u32 flags;
- u32 fd;
- u32 offset;
+ compat_ulong_t addr;
+ compat_ulong_t len;
+ compat_ulong_t prot;
+ compat_ulong_t flags;
+ compat_ulong_t fd;
+ compat_ulong_t offset;
};
-asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
-
- error = -EINVAL;
+ return -EFAULT;
if (a.offset & ~PAGE_MASK)
- goto out;
-
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
- a.offset >> PAGE_SHIFT);
-out:
- return error;
+ return -EINVAL;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+ a.offset >> PAGE_SHIFT);
}
-asmlinkage long
-sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
-out:
- return error;
+ return -EFAULT;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
}
asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index faeaccc..30de2d0 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1853,12 +1853,3 @@
llgtr %r3,%r3 # compat_uptr_t *
llgtr %r4,%r4 # compat_uptr_t *
jg sys32_execve # branch to system call
-
- .globl compat_sys_recvmmsg_wrapper
-compat_sys_recvmmsg_wrapper:
- lgfr %r2,%r2 # int
- llgtr %r3,%r3 # struct compat_mmsghdr *
- llgfr %r4,%r4 # unsigned int
- llgfr %r5,%r5 # unsigned int
- llgtr %r6,%r6 # struct compat_timespec *
- jg compat_sys_recvmmsg
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5417eb5..00b6d1d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -153,8 +153,6 @@
void flush_thread(void)
{
- clear_used_math();
- clear_tsk_thread_flag(current, TIF_USEDFPU);
}
void release_thread(struct task_struct *dead_task)
@@ -217,6 +215,7 @@
p->thread.mm_segment = get_fs();
/* Don't copy debug registers */
memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+ clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
/* Initialize per thread user and system timer values */
ti = task_thread_info(p);
ti->user_timer = 0;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 13815d3..7cf4642 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -65,6 +65,7 @@
{
struct pt_regs *regs;
per_struct *per_info;
+ per_cr_words cr_words;
regs = task_pt_regs(task);
per_info = (per_struct *) &task->thread.per_info;
@@ -98,6 +99,13 @@
per_info->control_regs.bits.storage_alt_space_ctl = 1;
else
per_info->control_regs.bits.storage_alt_space_ctl = 0;
+
+ if (task == current) {
+ __ctl_store(cr_words, 9, 11);
+ if (memcmp(&cr_words, &per_info->control_regs.words,
+ sizeof(cr_words)) != 0)
+ __ctl_load(per_info->control_regs.words, 9, 11);
+ }
}
void user_enable_single_step(struct task_struct *task)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 0663287..8d8957b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -87,7 +87,6 @@
char elf_platform[ELF_PLATFORM_SIZE];
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
-volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
int __initdata memory_end_set;
unsigned long __initdata memory_end;
@@ -124,12 +123,6 @@
*/
get_cpu_id(&S390_lowcore.cpu_id);
- /*
- * Force FPU initialization:
- */
- clear_thread_flag(TIF_USEDFPU);
- clear_used_math();
-
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
BUG_ON(current->mm);
@@ -855,7 +848,6 @@
setup_lowcore();
cpu_init();
- __cpu_logical_map[0] = stap();
s390_init_cpu_topology();
/*
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6b4fef8..1675c48 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -500,18 +500,10 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
/*
- * If we would have taken a single-step trap
- * for a normal instruction, act like we took
- * one for the handler setup.
- */
- if (current->thread.per_info.single_step)
- set_thread_flag(TIF_SINGLE_STEP);
-
- /*
* Let tracing know that we've done the handler setup.
*/
tracehook_signal_handler(signr, &info, &ka, regs,
- test_thread_flag(TIF_SINGLE_STEP));
+ current->thread.per_info.single_step);
}
return;
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 93e5203..76a6fdd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -52,6 +52,9 @@
#include <asm/cpu.h>
#include "entry.h"
+/* logical cpu to cpu address */
+int __cpu_logical_map[NR_CPUS];
+
static struct task_struct *current_set[NR_CPUS];
static u8 smp_cpu_type;
@@ -717,6 +720,12 @@
{
}
+void __init smp_setup_processor_id(void)
+{
+ S390_lowcore.cpu_nr = 0;
+ __cpu_logical_map[0] = stap();
+}
+
/*
* the frequency of the profiling timer can be changed
* by writing a multiplier value into /proc/profile.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 4f292c9..30eca07 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -340,4 +340,3 @@
SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
-SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 3c72c9c..14ef6f0 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -114,7 +114,7 @@
rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
for_each_present_cpu(lcpu) {
- if (__cpu_logical_map[lcpu] == rcpu) {
+ if (cpu_logical_map(lcpu) == rcpu) {
cpu_set(lcpu, core->mask);
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index 10754a3..cff327f 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -34,7 +34,7 @@
{
if (MACHINE_HAS_DIAG9C)
asm volatile("diag %0,0,0x9c"
- : : "d" (__cpu_logical_map[cpu]));
+ : : "d" (cpu_logical_map(cpu)));
else
_raw_yield();
}
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index f4558cc..869efba 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -40,7 +40,7 @@
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
@@ -61,7 +61,7 @@
#endif
return sysctl_legacy_va_layout ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
- current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY;
+ rlimit(RLIMIT_STACK) == RLIM_INFINITY;
}
#ifndef CONFIG_64BIT
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 674934b..ccf38f0 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -272,8 +272,9 @@
unsigned long address, pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index 8c15b2c..dfaf458 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -106,7 +106,7 @@
ram << (PAGE_SHIFT-10), codesize >> 10,
reservedpages << (PAGE_SHIFT-10), datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6a8861b..5c24628 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -353,6 +353,10 @@
{
I2C_BOARD_INFO("r2025sd", 0x32),
},
+ {
+ I2C_BOARD_INFO("lis3lv02d", 0x1c),
+ .irq = 33,
+ }
};
/* KEYSC */
@@ -1115,6 +1119,10 @@
gpio_direction_output(GPIO_PTU0, 0);
mdelay(20);
+ /* enable motion sensor */
+ gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+ gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index ba3046e..1ff93ac 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -165,8 +165,9 @@
unsigned long address, pte_t pte);
static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_cache(vma, address, pte);
__update_tlb(vma, address, pte);
}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 4753010..1677b5e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -371,7 +371,7 @@
local_flush_tlb_one(get_asid(), address & PAGE_MASK);
#endif
- update_mmu_cache(NULL, address, entry);
+ update_mmu_cache(NULL, address, pte);
return 0;
}
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 558a56b..2082af1 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -13,4 +13,4 @@
include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
$(Q)mkdir -p $(dir $@)
- $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+ $(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index e0cabe7..77f906d 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -330,9 +330,9 @@
#define FAULT_CODE_WRITE 0x2
#define FAULT_CODE_USER 0x4
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t *)
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+#define update_mmu_cache(vma,addr,ptep) BTFIXUP_CALL(update_mmu_cache)(vma,addr,ptep)
BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
unsigned long, unsigned int)
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index f3cb790..f5b5fa7 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -706,7 +706,7 @@
#define mmu_unlockarea(vaddr, len) do { } while(0)
struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index b99f81c..43e20ef 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -370,7 +370,7 @@
unsigned long address)
{
extern void sun4c_update_mmu_cache(struct vm_area_struct *,
- unsigned long,pte_t);
+ unsigned long,pte_t *);
extern pte_t *sun4c_pte_offset_kernel(pmd_t *,unsigned long);
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
@@ -447,7 +447,7 @@
* on the CPU and doing a shrink_mmap() on this vma.
*/
sun4c_update_mmu_cache (find_vma(current->mm, address), address,
- *ptep);
+ ptep);
else
do_sparc_fault(regs, text_fault, write, address);
}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1886d37..9245a82 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -289,12 +289,13 @@
}
}
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
struct tsb *tsb;
unsigned long tag, flags;
unsigned long tsb_index, tsb_hash_shift;
+ pte_t pte = *ptep;
if (tlb_type != hypervisor) {
unsigned long pfn = pte_pfn(pte);
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index 196263f..4e62c27 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -62,7 +62,7 @@
return NULL;
}
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 367321a..df49b20 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -694,7 +694,7 @@
* The following code is a deadwood that may be necessary when
* we start to make precise page flushes again. --zaitcev
*/
-static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte)
+static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t *ptep)
{
#if 0
static unsigned long last;
@@ -703,10 +703,10 @@
if (address == last) {
val = srmmu_hwprobe(address);
- if (val != 0 && pte_val(pte) != val) {
+ if (val != 0 && pte_val(*ptep) != val) {
printk("swift_update_mmu_cache: "
"addr %lx put %08x probed %08x from %p\n",
- address, pte_val(pte), val,
+ address, pte_val(*ptep), val,
__builtin_return_address(0));
srmmu_flush_whole_tlb();
}
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a89baf0..1865253 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -1887,7 +1887,7 @@
/* An experiment, turn off by default for now... -DaveM */
#define SUN4C_PRELOAD_PSEG
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
unsigned long flags;
int pseg;
@@ -1929,7 +1929,7 @@
start += PAGE_SIZE;
}
#ifndef SUN4C_PRELOAD_PSEG
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
#endif
local_irq_restore(flags);
return;
@@ -1940,7 +1940,7 @@
add_lru(entry);
}
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
local_irq_restore(flags);
}
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 5106924..3b3c366 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -125,50 +125,36 @@
void mconsole_proc(struct mc_request *req)
{
struct nameidata nd;
- struct file_system_type *proc;
- struct super_block *super;
+ struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
struct file *file;
int n, err;
char *ptr = req->request.data, *buf;
+ mm_segment_t old_fs = get_fs();
ptr += strlen("proc");
ptr = skip_spaces(ptr);
- proc = get_fs_type("proc");
- if (proc == NULL) {
- mconsole_reply(req, "procfs not registered", 1, 0);
- goto out;
- }
-
- super = (*proc->get_sb)(proc, 0, NULL, NULL);
- put_filesystem(proc);
- if (super == NULL) {
- mconsole_reply(req, "Failed to get procfs superblock", 1, 0);
- goto out;
- }
- up_write(&super->s_umount);
-
- nd.path.dentry = super->s_root;
- nd.path.mnt = NULL;
- nd.flags = O_RDONLY + 1;
- nd.last_type = LAST_ROOT;
-
- /* START: it was experienced that the stability problems are closed
- * if commenting out these two calls + the below read cycle. To
- * make UML crash again, it was enough to readd either one.*/
- err = link_path_walk(ptr, &nd);
+ err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd);
if (err) {
mconsole_reply(req, "Failed to look up file", 1, 0);
- goto out_kill;
+ goto out;
+ }
+
+ err = may_open(&nd.path, MAY_READ, FMODE_READ);
+ if (result) {
+ mconsole_reply(req, "Failed to open file", 1, 0);
+ path_put(&nd.path);
+ goto out;
}
file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
current_cred());
+ err = PTR_ERR(file);
if (IS_ERR(file)) {
mconsole_reply(req, "Failed to open file", 1, 0);
- goto out_kill;
+ path_put(&nd.path);
+ goto out;
}
- /*END*/
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (buf == NULL) {
@@ -176,10 +162,13 @@
goto out_fput;
}
- if ((file->f_op != NULL) && (file->f_op->read != NULL)) {
+ if (file->f_op->read) {
do {
- n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1,
- &file->f_pos);
+ loff_t pos;
+ set_fs(KERNEL_DS);
+ n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+ file_pos_write(file, pos);
+ set_fs(old_fs);
if (n >= 0) {
buf[n] = '\0';
mconsole_reply(req, buf, 0, (n > 0));
@@ -197,8 +186,6 @@
kfree(buf);
out_fput:
fput(file);
- out_kill:
- deactivate_super(super);
out: ;
}
#endif
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 9ce3f16..a9f7251 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -345,7 +345,7 @@
struct mm_struct;
extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
-#define update_mmu_cache(vma,address,pte) do ; while (0)
+#define update_mmu_cache(vma,address,ptep) do ; while (0)
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 4) & 0x3f)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 55298e8..cbcbfde 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -49,6 +49,7 @@
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_HW_BREAKPOINT
select PERF_EVENTS
select ANON_INODES
@@ -1246,6 +1247,11 @@
def_bool X86_64
depends on MEMORY_HOTPLUG
+config ILLEGAL_POINTER_VALUE
+ hex
+ default 0 if X86_32
+ default 0xdead000000000000 if X86_64
+
source "mm/Kconfig"
config HIGHPTE
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index f25bbd3..fbb47da 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -49,10 +49,13 @@
$(call if_changed,bzip2)
$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,lzo)
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_LZO) := lzo
quiet_cmd_mkpiggy = MKPIGGY $@
cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 842b2a3..3b22fe8 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -162,6 +162,10 @@
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
static void scroll(void)
{
int i;
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 858baa0..6c3fdd6 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,10 +108,11 @@
#define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9)
#define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0)
-extern struct atomic_notifier_head x86_mce_decoder_chain;
#ifdef __KERNEL__
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
#include <linux/percpu.h>
#include <linux/init.h>
#include <asm/atomic.h>
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 01fd946..a286683 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -80,7 +80,7 @@
* The i386 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
#endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c57a301..181be52 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -129,7 +129,7 @@
#define pte_unmap(pte) /* NOP */
#define pte_unmap_nested(pte) /* NOP */
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 0c9825e..088d09f 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -205,14 +205,13 @@
unsigned long n)
{
int sz = __compiletime_object_size(to);
- int ret = -EFAULT;
if (likely(sz == -1 || sz >= n))
- ret = _copy_from_user(to, from, n);
+ n = _copy_from_user(to, from, n);
else
copy_from_user_overflow();
- return ret;
+ return n;
}
long __must_check strncpy_from_user(char *dst, const char __user *src,
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 46324c6..535e4214 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -30,16 +30,15 @@
unsigned long n)
{
int sz = __compiletime_object_size(to);
- int ret = -EFAULT;
might_fault();
if (likely(sz == -1 || sz >= n))
- ret = _copy_from_user(to, from, n);
+ n = _copy_from_user(to, from, n);
#ifdef CONFIG_DEBUG_VM
else
WARN(1, "Buffer overflow detected!\n");
#endif
- return ret;
+ return n;
}
static __always_inline __must_check
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index bc54fa9..40be813 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -495,5 +495,17 @@
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
+/*
+ * Get the minimum revision number of the hub chips within the partition.
+ * 1 - initial rev 1.0 silicon
+ * 2 - rev 2.0 production silicon
+ */
+static inline int uv_get_min_hub_revision_id(void)
+{
+ extern int uv_min_hub_revision_id;
+
+ return uv_min_hub_revision_id;
+}
+
#endif /* CONFIG_X86_64 */
#endif /* _ASM_X86_UV_UV_HUB_H */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 3704997..f147a95 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,6 +31,7 @@
#include <asm/x86_init.h>
int gart_iommu_aperture;
+EXPORT_SYMBOL_GPL(gart_iommu_aperture);
int gart_iommu_aperture_disabled __initdata;
int gart_iommu_aperture_allowed __initdata;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index aa57c07..3987e44 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -61,12 +61,6 @@
/*
* The highest APIC ID seen during enumeration.
- *
- * On AMD, this determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
*/
unsigned int max_physical_apicid;
@@ -1898,14 +1892,17 @@
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (num_processors > 8)
+ if (num_processors > 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
def_to_bigsmp = 1;
- break;
- case X86_VENDOR_AMD:
- if (max_physical_apicid >= 8)
- def_to_bigsmp = 1;
+ }
}
#endif
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index eacbd2b..e3c3d82 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -240,6 +240,11 @@
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
+
+ if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
+ printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
+ return 1;
+ }
#endif
return 0;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index de00c46..53243ca 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2434,6 +2434,13 @@
cfg = irq_cfg(irq);
raw_spin_lock(&desc->lock);
+ /*
+ * Check if the irq migration is in progress. If so, we
+ * haven't received the cleanup request yet for this irq.
+ */
+ if (cfg->move_in_progress)
+ goto unlock;
+
if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
goto unlock;
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index c4cbd30..450fe20 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -67,17 +67,8 @@
}
#endif
- if (apic == &apic_flat) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (num_processors > 8)
- apic = &apic_physflat;
- break;
- case X86_VENDOR_AMD:
- if (max_physical_apicid >= 8)
- apic = &apic_physflat;
- }
- }
+ if (apic == &apic_flat && num_processors > 8)
+ apic = &apic_physflat;
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 5f92494..21db3cb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -36,6 +36,8 @@
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
static inline bool is_GRU_range(u64 start, u64 end)
{
@@ -55,12 +57,19 @@
mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
node_id.v = *mmr;
early_iounmap(mmr, sizeof(*mmr));
+
+ /* Currently, all blades have same revision number */
+ uv_min_hub_revision_id = node_id.s.revision;
+
return node_id.s.node_id;
}
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
+ int nodeid;
+
if (!strcmp(oem_id, "SGI")) {
+ nodeid = early_get_nodeid();
x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range;
if (!strcmp(oem_table_id, "UVL"))
uv_system_type = UV_LEGACY_APIC;
@@ -68,7 +77,7 @@
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
__get_cpu_var(x2apic_extra_bits) =
- early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+ nodeid << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
@@ -374,13 +383,13 @@
enum map_type {map_wb, map_uc};
-static __init void map_high(char *id, unsigned long base, int shift,
- int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+ int bshift, int max_pnode, enum map_type map_type)
{
unsigned long bytes, paddr;
- paddr = base << shift;
- bytes = (1UL << shift) * (max_pnode + 1);
+ paddr = base << pshift;
+ bytes = (1UL << bshift) * (max_pnode + 1);
printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
paddr + bytes);
if (map_type == map_uc)
@@ -396,7 +405,7 @@
gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
if (gru.s.enable) {
- map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+ map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
@@ -410,7 +419,7 @@
mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+ map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
}
static __init void map_mmioh_high(int max_pnode)
@@ -420,7 +429,8 @@
mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
if (mmioh.s.enable)
- map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+ map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+ max_pnode, map_uc);
}
static __init void map_low_mmrs(void)
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c56bc28..6d81755 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -123,13 +123,15 @@
while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) {
unsigned long addr = *ret_addr;
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
- frame = frame->next_frame;
- ret_addr = &frame->return_address;
- print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
- }
+ if (!__kernel_text_address(addr))
+ break;
+
+ ops->address(data, addr, 1);
+ frame = frame->next_frame;
+ ret_addr = &frame->return_address;
+ print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
}
+
return (unsigned long)frame;
}
EXPORT_SYMBOL_GPL(print_context_stack_bp);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 05ed7ab..a1a7876 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -733,13 +733,13 @@
};
static struct early_res early_res[MAX_EARLY_RES] __initdata = {
{ 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE)
/*
* But first pinch a few for the stack/trampoline stuff
* FIXME: Don't need the extra page at 4K, but need to fix
* trampoline before removing it. (see the GDT stuff)
*/
- { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 },
+ { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE", 1 },
#endif
{}
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index c6ee241..02c3ee0 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -288,6 +288,8 @@
regs.es = __USER_DS;
regs.fs = __KERNEL_PERCPU;
regs.gs = __KERNEL_STACK_CANARY;
+#else
+ regs.ss = __KERNEL_DS;
#endif
regs.orig_ax = -1;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index c973f8e..9a0c258 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -892,8 +892,7 @@
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
- );
+ totalhigh_pages << (PAGE_SHIFT-10));
printk(KERN_INFO "virtual kernel memory layout:\n"
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c
index b7a55dc..f81a2fa 100644
--- a/arch/x86/pci/intel_bus.c
+++ b/arch/x86/pci/intel_bus.c
@@ -49,6 +49,10 @@
u64 mmioh_base, mmioh_end;
int bus_base, bus_end;
+ /* some sys doesn't get mmconf enabled */
+ if (dev->cfg_size < 0x120)
+ return;
+
if (pci_root_num >= PCI_ROOT_NR) {
printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
return;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2b26dd5..36daccb 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1151,9 +1151,13 @@
/* keep using Xen gdt for now; no urgent need to change it */
+#ifdef CONFIG_X86_32
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+#else
+ pv_info.kernel_rpl = 0;
+#endif
/* set the limit of our address space */
xen_reserve_top();
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index a138770..76bf355 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -394,7 +394,7 @@
#define kern_addr_valid(addr) (1)
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* remap a physical page `pfn' of size `size' with page protection `prot'
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 3ba990c..85df465 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -147,9 +147,9 @@
#endif
void
-update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte)
+update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct page *page;
if (!pfn_valid(pfn))
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 19136a7..6f3f225 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -329,7 +329,7 @@
};
static struct ata_port_operations piix_sata_ops = {
- .inherits = &ata_bmdma_port_ops,
+ .inherits = &ata_bmdma32_port_ops,
};
static struct ata_port_operations piix_sidpr_sata_ops = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 22ff51b..6728328 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3790,21 +3790,45 @@
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
+ int tries = ATA_LINK_RESUME_TRIES;
u32 scontrol, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x300;
-
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- return rc;
-
- /* Some PHYs react badly if SStatus is pounded immediately
- * after resuming. Delay 200ms before debouncing.
+ /*
+ * Writes to SControl sometimes get ignored under certain
+ * controllers (ata_piix SIDPR). Make sure DET actually is
+ * cleared.
*/
- msleep(200);
+ do {
+ scontrol = (scontrol & 0x0f0) | 0x300;
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ return rc;
+ /*
+ * Some PHYs react badly if SStatus is pounded
+ * immediately after resuming. Delay 200ms before
+ * debouncing.
+ */
+ msleep(200);
+
+ /* is SControl restored correctly? */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+ } while ((scontrol & 0xf0f) != 0x300 && --tries);
+
+ if ((scontrol & 0xf0f) != 0x300) {
+ ata_link_printk(link, KERN_ERR,
+ "failed to resume link (SControl %X)\n",
+ scontrol);
+ return 0;
+ }
+
+ if (tries < ATA_LINK_RESUME_TRIES)
+ ata_link_printk(link, KERN_WARNING,
+ "link resume succeeded after %d retries\n",
+ ATA_LINK_RESUME_TRIES - tries);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 07d8d00..6330628 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -862,7 +862,7 @@
if (port_status & PDC_DRIVE_ERR)
ac_err_mask |= AC_ERR_DEV;
if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
- ac_err_mask |= AC_ERR_HSM;
+ ac_err_mask |= AC_ERR_OTHER;
if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
ac_err_mask |= AC_ERR_ATA_BUS;
if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index d7d77d4..ae6b6c4 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -309,17 +309,19 @@
* Block size attribute stuff
*/
static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ char *buf)
{
- return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+ return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
static int block_size_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_block_size_bytes.attr);
+ &attr_block_size_bytes.attr);
}
/*
@@ -330,7 +332,9 @@
*/
#ifdef CONFIG_ARCH_MEMORY_PROBE
static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
u64 phys_addr;
int nid;
@@ -346,12 +350,12 @@
return count;
}
-static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
+static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
static int memory_probe_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_probe.attr);
+ &attr_probe.attr);
}
#else
static inline int memory_probe_init(void)
@@ -367,7 +371,9 @@
/* Soft offline a page */
static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
int ret;
u64 pfn;
@@ -384,7 +390,9 @@
/* Forcibly offline a page, including killing processes. */
static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
int ret;
u64 pfn;
@@ -397,18 +405,18 @@
return ret ? ret : count;
}
-static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
-static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
+static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
+static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
static __init int memory_fail_init(void)
{
int err;
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_soft_offline_page.attr);
+ &attr_soft_offline_page.attr);
if (!err)
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_hard_offline_page.attr);
+ &attr_hard_offline_page.attr);
return err;
}
#else
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 48adf80..a5142bd 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -446,8 +446,8 @@
/**
* legacy_resume - Execute a legacy (bus or class) resume callback for device.
- * dev: Device to resume.
- * cb: Resume callback to execute.
+ * @dev: Device to resume.
+ * @cb: Resume callback to execute.
*/
static int legacy_resume(struct device *dev, int (*cb)(struct device *dev))
{
@@ -711,8 +711,9 @@
/**
* legacy_suspend - Execute a legacy (bus or class) suspend callback for device.
- * dev: Device to suspend.
- * cb: Suspend callback to execute.
+ * @dev: Device to suspend.
+ * @state: PM transition of the system being carried out.
+ * @cb: Suspend callback to execute.
*/
static int legacy_suspend(struct device *dev, pm_message_t state,
int (*cb)(struct device *dev, pm_message_t state))
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 31be3ac..e023682 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -669,7 +669,7 @@
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
- depends on PPC_PSERIES
+ depends on PPC_PSERIES && HVC_CONSOLE
help
Partitionable IBM Power5 ppc64 machines allow hosting of
firmware virtual consoles from one Linux partition by
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 5aa7a58..1afb896 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -725,12 +725,11 @@
int __init agp_amd64_init(void)
{
int err = 0;
- static int done = 0;
if (agp_off)
return -EINVAL;
- if (done++)
+ if (gart_iommu_aperture)
return agp_bridges_found ? 0 : -ENODEV;
err = pci_register_driver(&agp_amd64_pci_driver);
@@ -771,6 +770,8 @@
static void __exit agp_amd64_cleanup(void)
{
+ if (gart_iommu_aperture)
+ return;
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index a56ca08..c3ab46d 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -285,18 +285,22 @@
{
int error;
- if (agp_off)
- return -ENODEV;
+ if (agp_off) {
+ error = -ENODEV;
+ goto err_put_bridge;
+ }
if (!bridge->dev) {
printk (KERN_DEBUG PFX "Erk, registering with no pci_dev!\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_put_bridge;
}
/* Grab reference on the chipset driver. */
if (!try_module_get(bridge->driver->owner)) {
dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
- return -EINVAL;
+ error = -EINVAL;
+ goto err_put_bridge;
}
error = agp_backend_initialize(bridge);
@@ -326,6 +330,7 @@
agp_backend_cleanup(bridge);
err_out:
module_put(bridge->driver->owner);
+err_put_bridge:
agp_put_bridge(bridge);
return error;
}
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 9047b27..58752b7 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -488,9 +488,8 @@
handle = obj;
do {
status = acpi_get_object_info(handle, &info);
- if (ACPI_SUCCESS(status)) {
+ if (ACPI_SUCCESS(status) && (info->valid & ACPI_VALID_HID)) {
/* TBD check _CID also */
- info->hardware_id.string[sizeof(info->hardware_id.length)-1] = '\0';
match = (strcmp(info->hardware_id.string, "HWP0001") == 0);
kfree(info);
if (match) {
@@ -509,6 +508,9 @@
handle = parent;
} while (ACPI_SUCCESS(status));
+ if (ACPI_FAILURE(status))
+ return AE_OK; /* found no enclosing IOC */
+
if (hp_zx1_setup(sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa))
return AE_OK;
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 30c36ac..3999a5f 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -2460,10 +2460,14 @@
&bridge->mode);
}
- if (bridge->driver->mask_memory == intel_i965_mask_memory)
+ if (bridge->driver->mask_memory == intel_i965_mask_memory) {
if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
dev_err(&intel_private.pcidev->dev,
"set gfx device dma mask 36bit failed!\n");
+ else
+ pci_set_consistent_dma_mask(intel_private.pcidev,
+ DMA_BIT_MASK(36));
+ }
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index bdaef8e9..64fe0a7 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -114,7 +114,7 @@
{ 0 },
};
-static struct virtio_driver virtio_rng = {
+static struct virtio_driver virtio_rng_driver = {
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
@@ -124,12 +124,12 @@
static int __init init(void)
{
- return register_virtio_driver(&virtio_rng);
+ return register_virtio_driver(&virtio_rng_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_rng);
+ unregister_virtio_driver(&virtio_rng_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 6810443..73655ae 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -18,6 +18,7 @@
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include <linux/sched.h>
+#include <linux/math64.h>
#define BUCKETS 12
#define RESOLUTION 1024
@@ -169,6 +170,12 @@
static void menu_update(struct cpuidle_device *dev);
+/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */
+static u64 div_round64(u64 dividend, u32 divisor)
+{
+ return div_u64(dividend + (divisor / 2), divisor);
+}
+
/**
* menu_select - selects the next idle state to enter
* @dev: the CPU
@@ -209,9 +216,8 @@
data->correction_factor[data->bucket] = RESOLUTION * DECAY;
/* Make sure to round up for half microseconds */
- data->predicted_us = DIV_ROUND_CLOSEST(
- data->expected_us * data->correction_factor[data->bucket],
- RESOLUTION * DECAY);
+ data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
+ RESOLUTION * DECAY);
/*
* We want to default to C1 (hlt), not to busy polling
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c5facd9..000dc67 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -197,7 +197,7 @@
edac_printk(KERN_DEBUG, EDAC_MC,
"pci-read, sdram scrub control value: %d \n", scrubval);
- for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+ for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
if (scrubrates[i].scrubval == scrubval) {
*bw = scrubrates[i].bandwidth;
status = 0;
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 77a9579..adc10a2 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -577,7 +577,13 @@
debugf0("\tUncorrected bits= 0x%x\n", ue_errors);
branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
- channel = branch;
+
+ /*
+ * According with i5000 datasheet, bit 28 has no significance
+ * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
+ */
+ channel = branch & 2;
+
bank = NREC_BANK(info->nrecmema);
rank = NREC_RANK(info->nrecmema);
rdwr = NREC_RDWR(info->nrecmema);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a019b49..1f1d88a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -172,6 +172,15 @@
To compile this driver as a module, choose M here: the module will
be called adp5520-gpio.
+config GPIO_ADP5588
+ tristate "ADP5588 I2C GPIO expander"
+ depends on I2C
+ help
+ This option enables support for 18 GPIOs found
+ on Analog Devices ADP5588 GPIO Expanders.
+ To compile this driver as a module, choose M here: the module will be
+ called adp5588-gpio.
+
comment "PCI GPIO expanders:"
config GPIO_CS5535
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 52fe4cf..4868723 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
+obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/adp5588-gpio.c
new file mode 100644
index 0000000..afc097a
--- /dev/null
+++ b/drivers/gpio/adp5588-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * GPIO Chip driver for Analog Devices
+ * ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/adp5588.h>
+
+#define DRV_NAME "adp5588-gpio"
+#define MAXGPIO 18
+#define ADP_BANK(offs) ((offs) >> 3)
+#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+
+struct adp5588_gpio {
+ struct i2c_client *client;
+ struct gpio_chip gpio_chip;
+ struct mutex lock; /* protect cached dir, dat_out */
+ unsigned gpio_start;
+ uint8_t dat_out[3];
+ uint8_t dir[3];
+};
+
+static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Write Error\n");
+
+ return ret;
+}
+
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
+ & ADP_BIT(off));
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ mutex_unlock(&dev->lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+ int ret;
+ unsigned bank;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] &= ~ADP_BIT(off);
+ ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+ unsigned off, int val)
+{
+ int ret;
+ unsigned bank, bit;
+ struct adp5588_gpio *dev =
+ container_of(chip, struct adp5588_gpio, gpio_chip);
+
+ bank = ADP_BANK(off);
+ bit = ADP_BIT(off);
+
+ mutex_lock(&dev->lock);
+ dev->dir[bank] |= bit;
+
+ if (val)
+ dev->dat_out[bank] |= bit;
+ else
+ dev->dat_out[bank] &= ~bit;
+
+ ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
+ dev->dat_out[bank]);
+ ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank,
+ dev->dir[bank]);
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static int __devinit adp5588_gpio_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev;
+ struct gpio_chip *gc;
+ int ret, i, revid;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ dev->client = client;
+
+ gc = &dev->gpio_chip;
+ gc->direction_input = adp5588_gpio_direction_input;
+ gc->direction_output = adp5588_gpio_direction_output;
+ gc->get = adp5588_gpio_get_value;
+ gc->set = adp5588_gpio_set_value;
+ gc->can_sleep = 1;
+
+ gc->base = pdata->gpio_start;
+ gc->ngpio = MAXGPIO;
+ gc->label = client->name;
+ gc->owner = THIS_MODULE;
+
+ mutex_init(&dev->lock);
+
+
+ ret = adp5588_gpio_read(dev->client, DEV_ID);
+ if (ret < 0)
+ goto err;
+
+ revid = ret & ADP5588_DEVICE_ID_MASK;
+
+ for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
+ dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
+ ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
+ ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
+ (pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
+
+ if (ret)
+ goto err;
+ }
+
+ ret = gpiochip_add(&dev->gpio_chip);
+ if (ret)
+ goto err;
+
+ dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
+ gc->base, gc->base + gc->ngpio - 1,
+ client->name, revid);
+
+ if (pdata->setup) {
+ ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
+ if (ret < 0)
+ dev_warn(&client->dev, "setup failed, %d\n", ret);
+ }
+
+ i2c_set_clientdata(client, dev);
+ return 0;
+
+err:
+ kfree(dev);
+ return ret;
+}
+
+static int __devexit adp5588_gpio_remove(struct i2c_client *client)
+{
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
+ struct adp5588_gpio *dev = i2c_get_clientdata(client);
+ int ret;
+
+ if (pdata->teardown) {
+ ret = pdata->teardown(client,
+ dev->gpio_chip.base, dev->gpio_chip.ngpio,
+ pdata->context);
+ if (ret < 0) {
+ dev_err(&client->dev, "teardown failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = gpiochip_remove(&dev->gpio_chip);
+ if (ret) {
+ dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
+ return ret;
+ }
+
+ kfree(dev);
+ return 0;
+}
+
+static const struct i2c_device_id adp5588_gpio_id[] = {
+ {DRV_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
+
+static struct i2c_driver adp5588_gpio_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = adp5588_gpio_probe,
+ .remove = __devexit_p(adp5588_gpio_remove),
+ .id_table = adp5588_gpio_id,
+};
+
+static int __init adp5588_gpio_init(void)
+{
+ return i2c_add_driver(&adp5588_gpio_driver);
+}
+
+module_init(adp5588_gpio_init);
+
+static void __exit adp5588_gpio_exit(void)
+{
+ i2c_del_driver(&adp5588_gpio_driver);
+}
+
+module_exit(adp5588_gpio_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("GPIO ADP5588 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index a25ad28..350842a 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -858,8 +858,6 @@
desc = &gpio_desc[gpio];
if (test_bit(FLAG_EXPORT, &desc->flags)) {
- struct device *dev;
-
dev = class_find_device(&gpio_class, NULL, desc, match_export);
if (dev == NULL) {
status = -ENODEV;
diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c
index 628eae3..a1fce68 100644
--- a/drivers/gpu/drm/ati_pcigart.c
+++ b/drivers/gpu/drm/ati_pcigart.c
@@ -39,8 +39,7 @@
struct drm_ati_pcigart_info *gart_info)
{
gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size,
- PAGE_SIZE,
- gart_info->table_mask);
+ PAGE_SIZE);
if (gart_info->table_handle == NULL)
return -ENOMEM;
@@ -112,6 +111,13 @@
if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) {
DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n");
+ if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) {
+ DRM_ERROR("fail to set dma mask to 0x%Lx\n",
+ gart_info->table_mask);
+ ret = 1;
+ goto done;
+ }
+
ret = drm_ati_alloc_pcigart_table(dev, gart_info);
if (ret) {
DRM_ERROR("cannot allocate PCI GART page!\n");
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 3d09e30..8417cc4 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -326,7 +326,7 @@
* As we're limiting the address to 2^32-1 (or less),
* casting it down to 32 bits is no problem, but we
* need to point to a 64bit variable first. */
- dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL);
+ dmah = drm_pci_alloc(dev, map->size, map->size);
if (!dmah) {
kfree(map);
return -ENOMEM;
@@ -885,7 +885,7 @@
while (entry->buf_count < count) {
- dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000, 0xfffffffful);
+ dmah = drm_pci_alloc(dev, PAGE_SIZE << page_order, 0x1000);
if (!dmah) {
/* Set count correctly so we free the proper amount. */
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5124401..d91fb8c 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -158,6 +158,7 @@
{ DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
{ DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
+ { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 4231d6d..7d0f00a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -216,7 +216,7 @@
EXPORT_SYMBOL(drm_helper_crtc_in_use);
/**
- * drm_disable_unused_functions - disable unused objects
+ * drm_helper_disable_unused_functions - disable unused objects
* @dev: DRM device
*
* LOCKING:
@@ -702,7 +702,7 @@
if (encoder->crtc != crtc)
continue;
- DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+ DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
mode->name, mode->base.id);
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
@@ -1032,7 +1032,8 @@
/*
* we shouldn't end up with no modes here.
*/
- WARN(!count, "No connectors reported connected with modes\n");
+ if (count == 0)
+ printk(KERN_INFO "No connectors reported connected with modes\n");
drm_setup_crtcs(dev);
@@ -1162,6 +1163,9 @@
int drm_helper_resume_force_mode(struct drm_device *dev)
{
struct drm_crtc *crtc;
+ struct drm_encoder *encoder;
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_crtc_helper_funcs *crtc_funcs;
int ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -1174,6 +1178,25 @@
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
+
+ /* Turn off outputs that were already powered off */
+ if (drm_helper_choose_crtc_dpms(crtc)) {
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if(encoder->crtc != crtc)
+ continue;
+
+ encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+
+ crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ }
}
/* disable the unused connectors while restoring the modesetting */
drm_helper_disable_unused_functions(dev);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 5c9f798..defcaf1 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -911,23 +911,27 @@
struct drm_device *dev = connector->dev;
struct cvt_timing *cvt;
const int rates[] = { 60, 85, 75, 60, 50 };
+ const u8 empty[3] = { 0, 0, 0 };
for (i = 0; i < 4; i++) {
int uninitialized_var(width), height;
cvt = &(timing->data.other_data.data.cvt[i]);
- height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2;
- switch (cvt->code[1] & 0xc0) {
+ if (!memcmp(cvt->code, empty, 3))
+ continue;
+
+ height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
+ switch (cvt->code[1] & 0x0c) {
case 0x00:
width = height * 4 / 3;
break;
- case 0x40:
+ case 0x04:
width = height * 16 / 9;
break;
- case 0x80:
+ case 0x08:
width = height * 16 / 10;
break;
- case 0xc0:
+ case 0x0c:
width = height * 15 / 9;
break;
}
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 1b49fa0..1c2b7d4 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -156,7 +156,7 @@
force = DRM_FORCE_ON;
break;
case 'D':
- if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) &&
(connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
force = DRM_FORCE_ON;
else
@@ -606,11 +606,10 @@
return -EINVAL;
/* Need to resize the fb object !!! */
- if (var->xres > fb->width || var->yres > fb->height) {
- DRM_ERROR("Requested width/height is greater than current fb "
- "object %dx%d > %dx%d\n", var->xres, var->yres,
- fb->width, fb->height);
- DRM_ERROR("Need resizing code.\n");
+ if (var->bits_per_pixel > fb->bits_per_pixel || var->xres > fb->width || var->yres > fb->height) {
+ DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
+ "object %dx%d-%d > %dx%d-%d\n", var->xres, var->yres, var->bits_per_pixel,
+ fb->width, fb->height, fb->bits_per_pixel);
return -EINVAL;
}
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 7998ee6..b98384d 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -115,6 +115,7 @@
dev->num_crtcs = 0;
}
+EXPORT_SYMBOL(drm_vblank_cleanup);
int drm_vblank_init(struct drm_device *dev, int num_crtcs)
{
@@ -163,7 +164,6 @@
}
dev->vblank_disable_allowed = 0;
-
return 0;
err:
@@ -493,6 +493,9 @@
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
+ /* vblank is not initialized (IRQ not installed ?) */
+ if (!dev->num_crtcs)
+ return;
/*
* To avoid all the problems that might happen if interrupts
* were enabled/disabled around or between these calls, we just
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 6d81a02..76d6339 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1,9 +1,4 @@
/*
- * The list_sort function is (presumably) licensed under the GPL (see the
- * top level "COPYING" file for details).
- *
- * The remainder of this file is:
- *
* Copyright © 1997-2003 by The XFree86 Project, Inc.
* Copyright © 2007 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
@@ -36,6 +31,7 @@
*/
#include <linux/list.h>
+#include <linux/list_sort.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
@@ -855,6 +851,7 @@
/**
* drm_mode_compare - compare modes for favorability
+ * @priv: unused
* @lh_a: list_head for first mode
* @lh_b: list_head for second mode
*
@@ -868,7 +865,7 @@
* Negative if @lh_a is better than @lh_b, zero if they're equivalent, or
* positive if @lh_b is better than @lh_a.
*/
-static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b)
+static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head *lh_b)
{
struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head);
struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head);
@@ -885,85 +882,6 @@
return diff;
}
-/* FIXME: what we don't have a list sort function? */
-/* list sort from Mark J Roberts (mjr@znex.org) */
-void list_sort(struct list_head *head,
- int (*cmp)(struct list_head *a, struct list_head *b))
-{
- struct list_head *p, *q, *e, *list, *tail, *oldhead;
- int insize, nmerges, psize, qsize, i;
-
- list = head->next;
- list_del(head);
- insize = 1;
- for (;;) {
- p = oldhead = list;
- list = tail = NULL;
- nmerges = 0;
-
- while (p) {
- nmerges++;
- q = p;
- psize = 0;
- for (i = 0; i < insize; i++) {
- psize++;
- q = q->next == oldhead ? NULL : q->next;
- if (!q)
- break;
- }
-
- qsize = insize;
- while (psize > 0 || (qsize > 0 && q)) {
- if (!psize) {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- } else if (!qsize || !q) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else if (cmp(p, q) <= 0) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- }
- if (tail)
- tail->next = e;
- else
- list = e;
- e->prev = tail;
- tail = e;
- }
- p = q;
- }
-
- tail->next = list;
- list->prev = tail;
-
- if (nmerges <= 1)
- break;
-
- insize *= 2;
- }
-
- head->next = list;
- head->prev = list->prev;
- list->prev->next = head;
- list->prev = head;
-}
-
/**
* drm_mode_sort - sort mode list
* @mode_list: list to sort
@@ -975,7 +893,7 @@
*/
void drm_mode_sort(struct list_head *mode_list)
{
- list_sort(mode_list, drm_mode_compare);
+ list_sort(NULL, mode_list, drm_mode_compare);
}
EXPORT_SYMBOL(drm_mode_sort);
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index 577094f..e68ebf9 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -47,8 +47,7 @@
/**
* \brief Allocate a PCI consistent memory block, for DMA.
*/
-drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align,
- dma_addr_t maxaddr)
+drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align)
{
drm_dma_handle_t *dmah;
#if 1
@@ -63,11 +62,6 @@
if (align > size)
return NULL;
- if (pci_set_dma_mask(dev->pdev, maxaddr) != 0) {
- DRM_ERROR("Setting pci dma mask failed\n");
- return NULL;
- }
-
dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL);
if (!dmah)
return NULL;
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 18476bf..9c9998c 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -272,7 +272,7 @@
mem = kmap_atomic(pages[page], KM_USER0);
for (i = 0; i < PAGE_SIZE; i += 4)
seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
- kunmap_atomic(pages[page], KM_USER0);
+ kunmap_atomic(mem, KM_USER0);
}
}
@@ -386,34 +386,6 @@
return 0;
}
-static int i915_registers_info(struct seq_file *m, void *data) {
- struct drm_info_node *node = (struct drm_info_node *) m->private;
- struct drm_device *dev = node->minor->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t reg;
-
-#define DUMP_RANGE(start, end) \
- for (reg=start; reg < end; reg += 4) \
- seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg));
-
- DUMP_RANGE(0x00000, 0x00fff); /* VGA registers */
- DUMP_RANGE(0x02000, 0x02fff); /* instruction, memory, interrupt control registers */
- DUMP_RANGE(0x03000, 0x031ff); /* FENCE and PPGTT control registers */
- DUMP_RANGE(0x03200, 0x03fff); /* frame buffer compression registers */
- DUMP_RANGE(0x05000, 0x05fff); /* I/O control registers */
- DUMP_RANGE(0x06000, 0x06fff); /* clock control registers */
- DUMP_RANGE(0x07000, 0x07fff); /* 3D internal debug registers */
- DUMP_RANGE(0x07400, 0x088ff); /* GPE debug registers */
- DUMP_RANGE(0x0a000, 0x0afff); /* display palette registers */
- DUMP_RANGE(0x10000, 0x13fff); /* MMIO MCHBAR */
- DUMP_RANGE(0x30000, 0x3ffff); /* overlay registers */
- DUMP_RANGE(0x60000, 0x6ffff); /* display engine pipeline registers */
- DUMP_RANGE(0x70000, 0x72fff); /* display and cursor registers */
- DUMP_RANGE(0x73000, 0x73fff); /* performance counters */
-
- return 0;
-}
-
static int
i915_wedged_open(struct inode *inode,
struct file *filp)
@@ -519,7 +491,6 @@
}
static struct drm_info_list i915_debugfs_list[] = {
- {"i915_regs", i915_registers_info, 0},
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 701bfea..e660ac0 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -123,7 +123,7 @@
drm_i915_private_t *dev_priv = dev->dev_private;
/* Program Hardware Status Page */
dev_priv->status_page_dmah =
- drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff);
+ drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
if (!dev_priv->status_page_dmah) {
DRM_ERROR("Can not allocate hardware status page\n");
@@ -134,6 +134,10 @@
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+ if (IS_I965G(dev))
+ dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
+ 0xf0;
+
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
@@ -813,9 +817,13 @@
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
+ case I915_PARAM_HAS_EXECBUF2:
+ /* depends on GEM */
+ value = dev_priv->has_gem;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
- param->param);
+ param->param);
return -EINVAL;
}
@@ -1117,7 +1125,8 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mm_node *compressed_fb, *compressed_llb;
- unsigned long cfb_base, ll_base;
+ unsigned long cfb_base;
+ unsigned long ll_base = 0;
/* Leave 1M for line length buffer & misc. */
compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
@@ -1200,14 +1209,6 @@
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
- if (IS_MOBILE(dev) || IS_I9XX(dev))
- dev_priv->cursor_needs_physical = true;
- else
- dev_priv->cursor_needs_physical = false;
-
- if (IS_I965G(dev) || IS_G33(dev))
- dev_priv->cursor_needs_physical = false;
-
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
@@ -1257,6 +1258,8 @@
if (ret)
goto destroy_ringbuffer;
+ intel_modeset_init(dev);
+
ret = drm_irq_install(dev);
if (ret)
goto destroy_ringbuffer;
@@ -1271,8 +1274,6 @@
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
- intel_modeset_init(dev);
-
drm_helper_initial_config(dev);
return 0;
@@ -1360,7 +1361,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
- int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ int ret = 0, mmio_bar;
uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
@@ -1376,8 +1377,10 @@
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
+ dev_priv->info = (struct intel_device_info *) flags;
/* Add register map (needed for suspend/resume) */
+ mmio_bar = IS_I9XX(dev) ? 0 : 1;
base = drm_get_resource_start(dev, mmio_bar);
size = drm_get_resource_len(dev, mmio_bar);
@@ -1652,6 +1655,7 @@
DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH),
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 24286ca..46d8896 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -33,7 +33,6 @@
#include "i915_drm.h"
#include "i915_drv.h"
-#include "drm_pciids.h"
#include <linux/console.h>
#include "drm_crtc_helper.h"
@@ -46,10 +45,129 @@
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0400);
+unsigned int i915_lvds_downclock = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+
static struct drm_driver driver;
-static struct pci_device_id pciidlist[] = {
- i915_PCI_IDS
+#define INTEL_VGA_DEVICE(id, info) { \
+ .class = PCI_CLASS_DISPLAY_VGA << 8, \
+ .class_mask = 0xffff00, \
+ .vendor = 0x8086, \
+ .device = id, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .driver_data = (unsigned long) info }
+
+const static struct intel_device_info intel_i830_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_845g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i85x_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i865g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i915g_info = {
+ .is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i915gm_info = {
+ .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945g_info = {
+ .is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945gm_info = {
+ .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i965g_info = {
+ .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_i965gm_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
+ .is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g33_info = {
+ .is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g45_info = {
+ .is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_gm45_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
+ .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_pineview_info = {
+ .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_d_info = {
+ .is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_m_info = {
+ .is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
+ .need_gfx_hws = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct pci_device_id pciidlist[] = {
+ INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
+ INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
+ INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
+ INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),
+ INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),
+ INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),
+ INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),
+ INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
+ INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
+ {0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
@@ -284,6 +402,52 @@
return i915_resume(dev);
}
+static int
+i915_pm_suspend(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
+}
+
+static int
+i915_pm_resume(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+static int
+i915_pm_freeze(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
+}
+
+static int
+i915_pm_thaw(struct device *dev)
+{
+ /* thaw during hibernate, do nothing! */
+ return 0;
+}
+
+static int
+i915_pm_poweroff(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+}
+
+static int
+i915_pm_restore(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+const struct dev_pm_ops i915_pm_ops = {
+ .suspend = i915_pm_suspend,
+ .resume = i915_pm_resume,
+ .freeze = i915_pm_freeze,
+ .thaw = i915_pm_thaw,
+ .poweroff = i915_pm_poweroff,
+ .restore = i915_pm_restore,
+};
+
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
@@ -303,8 +467,11 @@
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
+
+ /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
+
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
@@ -344,10 +511,7 @@
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
-#ifdef CONFIG_PM
- .resume = i915_pci_resume,
- .suspend = i915_pci_suspend,
-#endif
+ .driver.pm = &i915_pm_ops,
},
.name = DRIVER_NAME,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fbecac7..2c16694 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -172,9 +172,31 @@
struct intel_overlay;
+struct intel_device_info {
+ u8 is_mobile : 1;
+ u8 is_i8xx : 1;
+ u8 is_i915g : 1;
+ u8 is_i9xx : 1;
+ u8 is_i945gm : 1;
+ u8 is_i965g : 1;
+ u8 is_i965gm : 1;
+ u8 is_g33 : 1;
+ u8 need_gfx_hws : 1;
+ u8 is_g4x : 1;
+ u8 is_pineview : 1;
+ u8 is_ironlake : 1;
+ u8 has_fbc : 1;
+ u8 has_rc6 : 1;
+ u8 has_pipe_cxsr : 1;
+ u8 has_hotplug : 1;
+ u8 cursor_needs_physical : 1;
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
+ const struct intel_device_info *info;
+
int has_gem;
void __iomem *regs;
@@ -232,8 +254,6 @@
int hangcheck_count;
uint32_t last_acthd;
- bool cursor_needs_physical;
-
struct drm_mm vram;
unsigned long cfb_size;
@@ -263,6 +283,7 @@
unsigned int lvds_use_ssc:1;
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int edp_bpp;
struct notifier_block lid_notifier;
@@ -287,8 +308,6 @@
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveDSPARB;
- u32 saveRENDERSTANDBY;
- u32 savePWRCTXA;
u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
@@ -561,6 +580,7 @@
u16 orig_clock;
int child_dev_num;
struct child_device_config *child_dev;
+ struct drm_connector *int_lvds_connector;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */
@@ -703,6 +723,7 @@
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern unsigned int i915_lvds_downclock;
extern void i915_save_display(struct drm_device *dev);
extern void i915_restore_display(struct drm_device *dev);
@@ -794,6 +815,8 @@
struct drm_file *file_priv);
int i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
@@ -843,6 +866,7 @@
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
+int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj);
int i915_gem_attach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj, int id);
void i915_gem_detach_phys_object(struct drm_device *dev,
@@ -860,6 +884,9 @@
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
+bool i915_tiling_ok(struct drm_device *dev, int stride, int size,
+ int tiling_mode);
+bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
@@ -982,67 +1009,33 @@
extern int i915_wrap_ring(struct drm_device * dev);
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
-#define IS_I830(dev) ((dev)->pci_device == 0x3577)
-#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
-#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
-#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev))
+#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
-#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
-#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
-#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
- (dev)->pci_device == 0x27AE)
-#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
- (dev)->pci_device == 0x2982 || \
- (dev)->pci_device == 0x2992 || \
- (dev)->pci_device == 0x29A2 || \
- (dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42 || \
- (dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- (dev)->pci_device == 0x0042 || \
- (dev)->pci_device == 0x0046)
-
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12)
-
-#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
-
-#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- IS_GM45(dev))
-
-#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
-#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
-#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev))
-
-#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
- (dev)->pci_device == 0x29B2 || \
- (dev)->pci_device == 0x29D2 || \
- (IS_PINEVIEW(dev)))
-
+#define IS_I830(dev) ((dev)->pci_device == 0x3577)
+#define IS_845G(dev) ((dev)->pci_device == 0x2562)
+#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
+#define IS_I8XX(dev) (INTEL_INFO(dev)->is_i8xx)
+#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
+#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
+#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm)
+#define IS_I965G(dev) (INTEL_INFO(dev)->is_i965g)
+#define IS_I965GM(dev) (INTEL_INFO(dev)->is_i965gm)
+#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x)
+#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview)
+#define IS_G33(dev) (INTEL_INFO(dev)->is_g33)
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
-#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev))
+#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake)
+#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx)
+#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
-#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
- IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
- IS_IRONLAKE(dev))
+#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
-#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
- IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
- IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev))
-
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
- IS_IRONLAKE(dev))
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
@@ -1054,17 +1047,14 @@
#define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev))
#define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \
!IS_IRONLAKE(dev) && !IS_PINEVIEW(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev))
-#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
- (IS_I9XX(dev) || IS_GM45(dev)) && \
- !IS_PINEVIEW(dev) && \
- !IS_IRONLAKE(dev))
-#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev))
+#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
+#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8c463cf..0c67924 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2021,9 +2021,6 @@
/* blow away mappings if mapped through GTT */
i915_gem_release_mmap(obj);
- if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- i915_gem_clear_fence_reg(obj);
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
@@ -2039,6 +2036,10 @@
BUG_ON(obj_priv->active);
+ /* release the fence reg _after_ flushing */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ i915_gem_clear_fence_reg(obj);
+
if (obj_priv->agp_mem != NULL) {
drm_unbind_agp(obj_priv->agp_mem);
drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
@@ -2581,9 +2582,6 @@
bool retry_alloc = false;
int ret;
- if (dev_priv->mm.suspended)
- return -EBUSY;
-
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to bind a purgeable object\n");
return -EINVAL;
@@ -2839,6 +2837,57 @@
return 0;
}
+/*
+ * Prepare buffer for display plane. Use uninterruptible for possible flush
+ * wait, as in modesetting process we're not supposed to be interrupted.
+ */
+int
+i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_write_domain, old_read_domains;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+
+ /* Wait on any GPU rendering and flushing to occur. */
+ if (obj_priv->active) {
+#if WATCH_BUF
+ DRM_INFO("%s: object %p wait for seqno %08x\n",
+ __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+ ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+ if (ret != 0)
+ return ret;
+ }
+
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
+ return 0;
+}
+
/**
* Moves a single object to the CPU read, and possibly write domain.
*
@@ -3198,7 +3247,7 @@
static int
i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
struct drm_file *file_priv,
- struct drm_i915_gem_exec_object *entry,
+ struct drm_i915_gem_exec_object2 *entry,
struct drm_i915_gem_relocation_entry *relocs)
{
struct drm_device *dev = obj->dev;
@@ -3206,12 +3255,35 @@
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int i, ret;
void __iomem *reloc_page;
+ bool need_fence;
+
+ need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
+
+ /* Check fence reg constraints and rebind if necessary */
+ if (need_fence && !i915_obj_fenceable(dev, obj))
+ i915_gem_object_unbind(obj);
/* Choose the GTT offset for our buffer and put it there. */
ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
if (ret)
return ret;
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle blits to/from tiled surfaces.
+ */
+ if (need_fence) {
+ ret = i915_gem_object_get_fence_reg(obj);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
+ i915_gem_object_unpin(obj);
+ return ret;
+ }
+ }
+
entry->offset = obj_priv->gtt_offset;
/* Apply the relocations, using the GTT aperture to avoid cache
@@ -3373,7 +3445,7 @@
*/
static int
i915_dispatch_gem_execbuffer(struct drm_device *dev,
- struct drm_i915_gem_execbuffer *exec,
+ struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset)
{
@@ -3463,7 +3535,7 @@
}
static int
-i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry **relocs)
{
@@ -3478,8 +3550,10 @@
}
*relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
- if (*relocs == NULL)
+ if (*relocs == NULL) {
+ DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count);
return -ENOMEM;
+ }
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
@@ -3503,7 +3577,7 @@
}
static int
-i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry *relocs)
{
@@ -3536,7 +3610,7 @@
}
static int
-i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec,
uint64_t exec_offset)
{
uint32_t exec_start, exec_len;
@@ -3589,18 +3663,18 @@
}
int
-i915_gem_execbuffer(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_execbuffer2 *args,
+ struct drm_i915_gem_exec_object2 *exec_list)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_execbuffer *args = data;
- struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
struct drm_i915_gem_object *obj_priv;
struct drm_clip_rect *cliprects = NULL;
struct drm_i915_gem_relocation_entry *relocs;
- int ret, ret2, i, pinned = 0;
+ int ret = 0, ret2, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains, reloc_index;
int pin_tries, flips;
@@ -3614,25 +3688,13 @@
DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
- /* Copy in the exec list from userland */
- exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count);
- if (exec_list == NULL || object_list == NULL) {
- DRM_ERROR("Failed to allocate exec or object list "
- "for %d buffers\n",
+ if (object_list == NULL) {
+ DRM_ERROR("Failed to allocate object list for %d buffers\n",
args->buffer_count);
ret = -ENOMEM;
goto pre_mutex_err;
}
- ret = copy_from_user(exec_list,
- (struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- sizeof(*exec_list) * args->buffer_count);
- if (ret != 0) {
- DRM_ERROR("copy %d exec entries failed %d\n",
- args->buffer_count, ret);
- goto pre_mutex_err;
- }
if (args->num_cliprects != 0) {
cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
@@ -3884,20 +3946,6 @@
mutex_unlock(&dev->struct_mutex);
- if (!ret) {
- /* Copy the new buffer offsets back to the user's exec list. */
- ret = copy_to_user((struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- exec_list,
- sizeof(*exec_list) * args->buffer_count);
- if (ret) {
- ret = -EFAULT;
- DRM_ERROR("failed to copy %d exec entries "
- "back to user (%d)\n",
- args->buffer_count, ret);
- }
- }
-
/* Copy the updated relocations out regardless of current error
* state. Failure to update the relocs would mean that the next
* time userland calls execbuf, it would do so with presumed offset
@@ -3914,12 +3962,156 @@
pre_mutex_err:
drm_free_large(object_list);
- drm_free_large(exec_list);
kfree(cliprects);
return ret;
}
+/*
+ * Legacy execbuffer just creates an exec2 list from the original exec object
+ * list array and passes it to the real function.
+ */
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer *args = data;
+ struct drm_i915_gem_execbuffer2 exec2;
+ struct drm_i915_gem_exec_object *exec_list = NULL;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret, i;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ /* Copy in the exec list from userland */
+ exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec_list == NULL || exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ for (i = 0; i < args->buffer_count; i++) {
+ exec2_list[i].handle = exec_list[i].handle;
+ exec2_list[i].relocation_count = exec_list[i].relocation_count;
+ exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
+ exec2_list[i].alignment = exec_list[i].alignment;
+ exec2_list[i].offset = exec_list[i].offset;
+ if (!IS_I965G(dev))
+ exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
+ else
+ exec2_list[i].flags = 0;
+ }
+
+ exec2.buffers_ptr = args->buffers_ptr;
+ exec2.buffer_count = args->buffer_count;
+ exec2.batch_start_offset = args->batch_start_offset;
+ exec2.batch_len = args->batch_len;
+ exec2.DR1 = args->DR1;
+ exec2.DR4 = args->DR4;
+ exec2.num_cliprects = args->num_cliprects;
+ exec2.cliprects_ptr = args->cliprects_ptr;
+ exec2.flags = 0;
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ for (i = 0; i < args->buffer_count; i++)
+ exec_list[i].offset = exec2_list[i].offset;
+ /* ... and back out to userspace */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec_list,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ }
+
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return ret;
+}
+
+int
+i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer2 *args = data;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec2_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec2_list,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ }
+
+ drm_free_large(exec2_list);
+ return ret;
+}
+
int
i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
{
@@ -3933,19 +4125,7 @@
if (ret)
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
- ret = i915_gem_object_get_fence_reg(obj);
- if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to install fence: %d\n",
- ret);
- return ret;
- }
- }
+
obj_priv->pin_count++;
/* If the object is not active and not pending a flush,
@@ -4708,7 +4888,7 @@
phys_obj->id = id;
- phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff);
+ phys_obj->handle = drm_pci_alloc(dev, size, 0);
if (!phys_obj->handle) {
ret = -ENOMEM;
goto kfree_obj;
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 30d6af6..df278b2 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -304,35 +304,39 @@
/**
- * Returns the size of the fence for a tiled object of the given size.
+ * Returns whether an object is currently fenceable. If not, it may need
+ * to be unbound and have its pitch adjusted.
*/
-static int
-i915_get_fence_size(struct drm_device *dev, int size)
+bool
+i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
{
- int i;
- int start;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (IS_I965G(dev)) {
/* The 965 can have fences at any page boundary. */
- return ALIGN(size, 4096);
+ if (obj->size & 4095)
+ return false;
+ return true;
+ } else if (IS_I9XX(dev)) {
+ if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
+ return false;
} else {
- /* Align the size to a power of two greater than the smallest
- * fence size.
- */
- if (IS_I9XX(dev))
- start = 1024 * 1024;
- else
- start = 512 * 1024;
-
- for (i = start; i < size; i <<= 1)
- ;
-
- return i;
+ if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
+ return false;
}
+
+ /* Power of two sized... */
+ if (obj->size & (obj->size - 1))
+ return false;
+
+ /* Objects must be size aligned as well */
+ if (obj_priv->gtt_offset & (obj->size - 1))
+ return false;
+ return true;
}
/* Check pitch constriants for all chips & tiling formats */
-static bool
+bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
int tile_width;
@@ -384,12 +388,6 @@
if (stride & (stride - 1))
return false;
- /* We don't 0handle the aperture area covered by the fence being bigger
- * than the object size.
- */
- if (i915_get_fence_size(dev, size) != size)
- return false;
-
return true;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 85f4c5d..89a071a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -274,7 +274,6 @@
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir;
- u32 new_de_iir, new_gt_iir, new_pch_iir;
struct drm_i915_master_private *master_priv;
/* disable master interrupt before clearing iir */
@@ -286,49 +285,42 @@
gt_iir = I915_READ(GTIIR);
pch_iir = I915_READ(SDEIIR);
- for (;;) {
- if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
- break;
+ if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+ goto done;
- ret = IRQ_HANDLED;
+ ret = IRQ_HANDLED;
- /* should clear PCH hotplug event before clear CPU irq */
- I915_WRITE(SDEIIR, pch_iir);
- new_pch_iir = I915_READ(SDEIIR);
-
- I915_WRITE(DEIIR, de_iir);
- new_de_iir = I915_READ(DEIIR);
- I915_WRITE(GTIIR, gt_iir);
- new_gt_iir = I915_READ(GTIIR);
-
- if (dev->primary->master) {
- master_priv = dev->primary->master->driver_priv;
- if (master_priv->sarea_priv)
- master_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- }
-
- if (gt_iir & GT_USER_INTERRUPT) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
- trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
- }
-
- if (de_iir & DE_GSE)
- ironlake_opregion_gse_intr(dev);
-
- /* check event from PCH */
- if ((de_iir & DE_PCH_EVENT) &&
- (pch_iir & SDE_HOTPLUG_MASK)) {
- queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- }
-
- de_iir = new_de_iir;
- gt_iir = new_gt_iir;
- pch_iir = new_pch_iir;
+ if (dev->primary->master) {
+ master_priv = dev->primary->master->driver_priv;
+ if (master_priv->sarea_priv)
+ master_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
}
+ if (gt_iir & GT_USER_INTERRUPT) {
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ }
+
+ if (de_iir & DE_GSE)
+ ironlake_opregion_gse_intr(dev);
+
+ /* check event from PCH */
+ if ((de_iir & DE_PCH_EVENT) &&
+ (pch_iir & SDE_HOTPLUG_MASK)) {
+ queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+ }
+
+ /* should clear PCH hotplug event before clear CPU irq */
+ I915_WRITE(SDEIIR, pch_iir);
+ I915_WRITE(GTIIR, gt_iir);
+ I915_WRITE(DEIIR, de_iir);
+
+done:
I915_WRITE(DEIER, de_ier);
(void)I915_READ(DEIER);
@@ -1084,6 +1076,10 @@
(void) I915_READ(IER);
}
+/*
+ * Must be called after intel_modeset_init or hotplug interrupts won't be
+ * enabled correctly.
+ */
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1106,19 +1102,23 @@
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- /* Leave other bits alone */
- hotplug_en |= HOTPLUG_EN_MASK;
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ /* Ignore TV since it's buggy */
+
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
- TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
- SDVOB_HOTPLUG_INT_STATUS;
- if (IS_G4X(dev)) {
- dev_priv->hotplug_supported_mask |=
- HDMIB_HOTPLUG_INT_STATUS |
- HDMIC_HOTPLUG_INT_STATUS |
- HDMID_HOTPLUG_INT_STATUS;
- }
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 974b3cf..847006c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -879,13 +879,6 @@
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
-#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
- HDMIC_HOTPLUG_INT_EN | \
- HDMID_HOTPLUG_INT_EN | \
- SDVOB_HOTPLUG_INT_EN | \
- SDVOC_HOTPLUG_INT_EN | \
- CRT_HOTPLUG_INT_EN)
-
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
@@ -982,6 +975,8 @@
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define LVDS_ENABLE_DITHER (1 << 25)
/* Enable border for unscaled (or aspect-scaled) display */
#define LVDS_BORDER_ENABLE (1 << 15)
/*
@@ -1751,6 +1746,8 @@
/* Display & cursor control */
+/* dithering flag on Ironlake */
+#define PIPE_ENABLE_DITHER (1 << 4)
/* Pipe A */
#define PIPEADSL 0x70000
#define PIPEACONF 0x70008
@@ -1818,7 +1815,7 @@
#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
#define DSPFW_CURSORA_MASK 0x00003f00
-#define DSPFW_CURSORA_SHIFT 16
+#define DSPFW_CURSORA_SHIFT 8
#define DSPFW3 0x7003c
#define DSPFW_HPLL_SR_EN (1<<31)
#define DSPFW_CURSOR_SR_SHIFT 24
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index d5ebb00..a3b90c9 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -732,12 +732,6 @@
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
- dev_priv->savePWRCTXA = I915_READ(PWRCTXA);
- }
-
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
@@ -793,12 +787,6 @@
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
- I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA);
- }
-
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index f275677..15fbc1b 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -33,6 +33,8 @@
#define SLAVE_ADDR1 0x70
#define SLAVE_ADDR2 0x72
+static int panel_type;
+
static void *
find_section(struct bdb_header *bdb, int section_id)
{
@@ -128,6 +130,7 @@
dev_priv->lvds_dither = lvds_options->pixel_dither;
if (lvds_options->panel_type == 0xff)
return;
+ panel_type = lvds_options->panel_type;
lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
if (!lvds_lfp_data)
@@ -197,7 +200,8 @@
memset(temp_mode, 0, sizeof(*temp_mode));
}
kfree(temp_mode);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
DRM_DEBUG_KMS("LVDS downclock is found in VBT. ",
@@ -405,6 +409,34 @@
}
static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+ struct bdb_edp *edp;
+
+ edp = find_section(bdb, BDB_EDP);
+ if (!edp) {
+ if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
+ DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
+ assume 18bpp panel color depth.\n");
+ dev_priv->edp_bpp = 18;
+ }
+ return;
+ }
+
+ switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+ case EDP_18BPP:
+ dev_priv->edp_bpp = 18;
+ break;
+ case EDP_24BPP:
+ dev_priv->edp_bpp = 24;
+ break;
+ case EDP_30BPP:
+ dev_priv->edp_bpp = 30;
+ break;
+ }
+}
+
+static void
parse_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
@@ -521,6 +553,7 @@
parse_sdvo_device_mapping(dev_priv, bdb);
parse_device_mapping(dev_priv, bdb);
parse_driver_features(dev_priv, bdb);
+ parse_edp(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 425ac9d..4c18514 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -98,6 +98,7 @@
#define BDB_SDVO_LVDS_PNP_IDS 24
#define BDB_SDVO_LVDS_POWER_SEQ 25
#define BDB_TV_OPTIONS 26
+#define BDB_EDP 27
#define BDB_LVDS_OPTIONS 40
#define BDB_LVDS_LFP_DATA_PTRS 41
#define BDB_LVDS_LFP_DATA 42
@@ -426,6 +427,45 @@
u8 custom_vbt_version;
} __attribute__((packed));
+#define EDP_18BPP 0
+#define EDP_24BPP 1
+#define EDP_30BPP 2
+#define EDP_RATE_1_62 0
+#define EDP_RATE_2_7 1
+#define EDP_LANE_1 0
+#define EDP_LANE_2 1
+#define EDP_LANE_4 3
+#define EDP_PREEMPHASIS_NONE 0
+#define EDP_PREEMPHASIS_3_5dB 1
+#define EDP_PREEMPHASIS_6dB 2
+#define EDP_PREEMPHASIS_9_5dB 3
+#define EDP_VSWING_0_4V 0
+#define EDP_VSWING_0_6V 1
+#define EDP_VSWING_0_8V 2
+#define EDP_VSWING_1_2V 3
+
+struct edp_power_seq {
+ u16 t3;
+ u16 t7;
+ u16 t9;
+ u16 t10;
+ u16 t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+ u8 rate:4;
+ u8 lanes:4;
+ u8 preemphasis:4;
+ u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+ struct edp_power_seq power_seqs[16];
+ u32 color_depth;
+ u32 sdrrs_msa_timing_delay;
+ struct edp_link_params link_params[16];
+} __attribute__ ((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9f3d3e5..ddefc87 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -548,4 +548,6 @@
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
+
+ dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 52cd9b0..45da78e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -70,8 +70,6 @@
intel_p2_t p2;
bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
int, int, intel_clock_t *);
- bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *);
};
#define I8XX_DOT_MIN 25000
@@ -243,11 +241,11 @@
#define IRONLAKE_VCO_MIN 1760000
#define IRONLAKE_VCO_MAX 3510000
#define IRONLAKE_N_MIN 1
-#define IRONLAKE_N_MAX 5
+#define IRONLAKE_N_MAX 6
#define IRONLAKE_M_MIN 79
-#define IRONLAKE_M_MAX 118
+#define IRONLAKE_M_MAX 127
#define IRONLAKE_M1_MIN 12
-#define IRONLAKE_M1_MAX 23
+#define IRONLAKE_M1_MAX 22
#define IRONLAKE_M2_MIN 5
#define IRONLAKE_M2_MAX 9
#define IRONLAKE_P_SDVO_DAC_MIN 5
@@ -262,18 +260,20 @@
#define IRONLAKE_P2_LVDS_FAST 7 /* double channel */
#define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
+#define IRONLAKE_P_DISPLAY_PORT_MIN 10
+#define IRONLAKE_P_DISPLAY_PORT_MAX 20
+#define IRONLAKE_P2_DISPLAY_PORT_FAST 10
+#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10
+#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0
+#define IRONLAKE_P1_DISPLAY_PORT_MIN 1
+#define IRONLAKE_P1_DISPLAY_PORT_MAX 2
+
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
-static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
@@ -294,7 +294,6 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i8xx_lvds = {
@@ -309,7 +308,6 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_sdvo = {
@@ -324,7 +322,6 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_lvds = {
@@ -342,7 +339,6 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
/* below parameter and function is for G4X Chipset Family*/
@@ -360,7 +356,6 @@
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_hdmi = {
@@ -377,7 +372,6 @@
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
@@ -402,7 +396,6 @@
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
@@ -427,7 +420,6 @@
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_display_port = {
@@ -465,7 +457,6 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_pineview_lvds = {
@@ -481,7 +472,6 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_ironlake_sdvo = {
@@ -496,7 +486,7 @@
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
.p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_lvds = {
@@ -511,7 +501,30 @@
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_LVDS_SLOW,
.p2_fast = IRONLAKE_P2_LVDS_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+ .dot = { .min = IRONLAKE_DOT_MIN,
+ .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN,
+ .max = IRONLAKE_VCO_MAX},
+ .n = { .min = IRONLAKE_N_MIN,
+ .max = IRONLAKE_N_MAX },
+ .m = { .min = IRONLAKE_M_MIN,
+ .max = IRONLAKE_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN,
+ .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN,
+ .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_ironlake_dp,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
@@ -519,6 +532,9 @@
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
limit = &intel_limits_ironlake_lvds;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ HAS_eDP)
+ limit = &intel_limits_ironlake_display_port;
else
limit = &intel_limits_ironlake_sdvo;
@@ -737,46 +753,6 @@
return (err != target);
}
-
-static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int err = target;
- bool found = false;
-
- memcpy(&clock, best_clock, sizeof(intel_clock_t));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
- for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
- /* m1 is always 0 in Pineview */
- if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
- break;
- for (clock.n = limit->n.min; clock.n <= limit->n.max;
- clock.n++) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
-
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- found = true;
- }
- }
- }
- }
-
- return found;
-}
-
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
@@ -791,7 +767,13 @@
found = false;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ int lvds_reg;
+
+ if (IS_IRONLAKE(dev))
+ lvds_reg = PCH_LVDS;
+ else
+ lvds_reg = LVDS;
+ if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
@@ -839,6 +821,11 @@
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
+
+ /* return directly when it is eDP */
+ if (HAS_eDP)
+ return true;
+
if (target < 200000) {
clock.n = 1;
clock.p1 = 2;
@@ -857,68 +844,6 @@
return true;
}
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- intel_clock_t clock;
- int err_most = 47;
- int err_min = 10000;
-
- /* eDP has only 2 clock choice, no n/m/p setting */
- if (HAS_eDP)
- return true;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
- return intel_find_pll_ironlake_dp(limit, crtc, target,
- refclk, best_clock);
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
- /* based on hardware requriment prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
- /* based on hardware requirment prefere larger m1,m2 */
- for (clock.m1 = limit->m1.max;
- clock.m1 >= limit->m1.min; clock.m1--) {
- for (clock.m2 = limit->m2.max;
- clock.m2 >= limit->m2.min; clock.m2--) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
- this_err = abs((10000 - (target*10000/clock.dot)));
- if (this_err < err_most) {
- *best_clock = clock;
- /* found on first matching */
- goto out;
- } else if (this_err < err_min) {
- *best_clock = clock;
- err_min = this_err;
- }
- }
- }
- }
- }
-out:
- return true;
-}
-
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
static bool
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
@@ -1282,7 +1207,7 @@
return ret;
}
- ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ ret = i915_gem_object_set_to_display_plane(obj);
if (ret != 0) {
i915_gem_object_unpin(obj);
mutex_unlock(&dev->struct_mutex);
@@ -1493,6 +1418,10 @@
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
int tries = 5, j, n;
+ u32 pipe_bpc;
+
+ temp = I915_READ(pipeconf_reg);
+ pipe_bpc = temp & PIPE_BPC_MASK;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -1524,6 +1453,12 @@
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
+ /*
+ * make the BPC in FDI Rx be consistent with that in
+ * pipeconf reg.
+ */
+ temp &= ~(0x7 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
FDI_SEL_PCDCLK |
FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
@@ -1666,6 +1601,12 @@
/* enable PCH transcoder */
temp = I915_READ(transconf_reg);
+ /*
+ * make the BPC in transcoder be consistent with
+ * that in pipeconf reg.
+ */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
@@ -1745,6 +1686,9 @@
I915_READ(fdi_tx_reg);
temp = I915_READ(fdi_rx_reg);
+ /* BPC in FDI rx is consistent with that in pipeconf */
+ temp &= ~(0x07 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
@@ -1789,7 +1733,12 @@
}
}
}
-
+ temp = I915_READ(transconf_reg);
+ /* BPC in transcoder is consistent with that in pipeconf */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
+ I915_WRITE(transconf_reg, temp);
+ I915_READ(transconf_reg);
udelay(100);
/* disable PCH DPLL */
@@ -2448,7 +2397,7 @@
* A value of 5us seems to be a good balance; safe for very low end
* platforms but not overly aggressive on lower latency configs.
*/
-const static int latency_ns = 5000;
+static const int latency_ns = 5000;
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
@@ -2559,7 +2508,7 @@
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2598,7 +2547,7 @@
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2667,7 +2616,7 @@
if (HAS_FW_BLC(dev) && sr_hdisplay &&
(!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 6000;
+ static const int sr_latency_ns = 6000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
@@ -2906,10 +2855,8 @@
return -EINVAL;
}
- if (is_lvds && limit->find_reduced_pll &&
- dev_priv->lvds_downclock_avail) {
- memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
- has_reduced_clock = limit->find_reduced_pll(limit, crtc,
+ if (is_lvds && dev_priv->lvds_downclock_avail) {
+ has_reduced_clock = limit->find_pll(limit, crtc,
dev_priv->lvds_downclock,
refclk,
&reduced_clock);
@@ -2969,6 +2916,33 @@
/* determine panel color depth */
temp = I915_READ(pipeconf_reg);
+ temp &= ~PIPE_BPC_MASK;
+ if (is_lvds) {
+ int lvds_reg = I915_READ(PCH_LVDS);
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ temp |= PIPE_8BPC;
+ else
+ temp |= PIPE_6BPC;
+ } else if (is_edp) {
+ switch (dev_priv->edp_bpp/3) {
+ case 8:
+ temp |= PIPE_8BPC;
+ break;
+ case 10:
+ temp |= PIPE_10BPC;
+ break;
+ case 6:
+ temp |= PIPE_6BPC;
+ break;
+ case 12:
+ temp |= PIPE_12BPC;
+ break;
+ }
+ } else
+ temp |= PIPE_8BPC;
+ I915_WRITE(pipeconf_reg, temp);
+ I915_READ(pipeconf_reg);
switch (temp & PIPE_BPC_MASK) {
case PIPE_8BPC:
@@ -3195,7 +3169,20 @@
* appropriately here, but we need to look more thoroughly into how
* panels behave in the two modes.
*/
-
+ /* set the dithering flag */
+ if (IS_I965G(dev)) {
+ if (dev_priv->lvds_dither) {
+ if (IS_IRONLAKE(dev))
+ pipeconf |= PIPE_ENABLE_DITHER;
+ else
+ lvds |= LVDS_ENABLE_DITHER;
+ } else {
+ if (IS_IRONLAKE(dev))
+ pipeconf &= ~PIPE_ENABLE_DITHER;
+ else
+ lvds &= ~LVDS_ENABLE_DITHER;
+ }
+ }
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
@@ -3385,7 +3372,7 @@
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
- if (!dev_priv->cursor_needs_physical) {
+ if (!dev_priv->info->cursor_needs_physical) {
ret = i915_gem_object_pin(bo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin cursor bo\n");
@@ -3420,7 +3407,7 @@
I915_WRITE(base, addr);
if (intel_crtc->cursor_bo) {
- if (dev_priv->cursor_needs_physical) {
+ if (dev_priv->info->cursor_needs_physical) {
if (intel_crtc->cursor_bo != bo)
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
@@ -3779,125 +3766,6 @@
queue_work(dev_priv->wq, &dev_priv->idle_work);
}
-void intel_increase_renderclock(struct drm_device *dev, bool schedule)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- /* Restore render clock frequency to original value */
- if (IS_G4X(dev) || IS_I9XX(dev))
- pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock);
- else if (IS_I85X(dev))
- pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock);
- DRM_DEBUG_DRIVER("increasing render clock frequency\n");
-
- /* Schedule downclock */
- if (schedule)
- mod_timer(&dev_priv->idle_timer, jiffies +
- msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-}
-
-void intel_decrease_renderclock(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- if (IS_G4X(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK;
- gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I965G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I965_GC_RENDER_CLOCK_MASK;
- gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I945G(dev) || IS_I945GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I945_GC_RENDER_CLOCK_MASK;
- gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I915G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I915_GC_RENDER_CLOCK_MASK;
- gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I85X(dev)) {
- u16 hpllcc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, HPLLCC, &hpllcc);
-
- /* Up to maximum... */
- hpllcc &= ~GC_CLOCK_CONTROL_MASK;
- hpllcc |= GC_CLOCK_133_200;
-
- pci_write_config_word(dev->pdev, HPLLCC, hpllcc);
- }
- DRM_DEBUG_DRIVER("decreasing render clock frequency\n");
-}
-
-/* Note that no increase function is needed for this - increase_renderclock()
- * will also rewrite these bits
- */
-void intel_decrease_displayclock(struct drm_device *dev)
-{
- if (IS_IRONLAKE(dev))
- return;
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) ||
- IS_I915GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~0xf0;
- gcfgc |= 0x80;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- }
-}
-
#define CRTC_IDLE_TIMEOUT 1000 /* ms */
static void intel_crtc_idle_timer(unsigned long arg)
@@ -4011,12 +3879,6 @@
mutex_lock(&dev->struct_mutex);
- /* GPU isn't processing, downclock it. */
- if (!dev_priv->busy) {
- intel_decrease_renderclock(dev);
- intel_decrease_displayclock(dev);
- }
-
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
/* Skip inactive CRTCs */
if (!crtc->fb)
@@ -4050,13 +3912,11 @@
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
- if (!dev_priv->busy) {
+ if (!dev_priv->busy)
dev_priv->busy = true;
- intel_increase_renderclock(dev, true);
- } else {
+ else
mod_timer(&dev_priv->idle_timer, jiffies +
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
- }
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->fb)
@@ -4400,29 +4260,43 @@
bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev, SDVOB);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+ if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, SDVOB);
+ }
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_B\n");
intel_dp_init(dev, DP_B);
+ }
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (I915_READ(SDVOB) & SDVO_DETECTED)
+ if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOC\n");
found = intel_sdvo_init(dev, SDVOC);
+ }
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
- if (SUPPORTS_INTEGRATED_HDMI(dev))
+ if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
intel_hdmi_init(dev, SDVOC);
- if (SUPPORTS_INTEGRATED_DP(dev))
+ }
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_C\n");
intel_dp_init(dev, DP_C);
+ }
}
- if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ if (SUPPORTS_INTEGRATED_DP(dev) &&
+ (I915_READ(DP_D) & DP_DETECTED)) {
+ DRM_DEBUG_KMS("probing DP_D\n");
intel_dp_init(dev, DP_D);
+ }
} else if (IS_I8XX(dev))
intel_dvo_init(dev);
@@ -4527,6 +4401,42 @@
.fb_changed = intelfb_probe,
};
+static struct drm_gem_object *
+intel_alloc_power_context(struct drm_device *dev)
+{
+ struct drm_gem_object *pwrctx;
+ int ret;
+
+ pwrctx = drm_gem_object_alloc(dev, 4096);
+ if (!pwrctx) {
+ DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
+ return NULL;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(pwrctx, 4096);
+ if (ret) {
+ DRM_ERROR("failed to pin power context: %d\n", ret);
+ goto err_unref;
+ }
+
+ ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
+ if (ret) {
+ DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+ goto err_unpin;
+ }
+ mutex_unlock(&dev->struct_mutex);
+
+ return pwrctx;
+
+err_unpin:
+ i915_gem_object_unpin(pwrctx);
+err_unref:
+ drm_gem_object_unreference(pwrctx);
+ mutex_unlock(&dev->struct_mutex);
+ return NULL;
+}
+
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4579,42 +4489,27 @@
* GPU can automatically power down the render unit if given a page
* to save state.
*/
- if (I915_HAS_RC6(dev)) {
- struct drm_gem_object *pwrctx;
- struct drm_i915_gem_object *obj_priv;
- int ret;
+ if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
+ struct drm_i915_gem_object *obj_priv = NULL;
if (dev_priv->pwrctx) {
obj_priv = dev_priv->pwrctx->driver_private;
} else {
- pwrctx = drm_gem_object_alloc(dev, 4096);
- if (!pwrctx) {
- DRM_DEBUG("failed to alloc power context, "
- "RC6 disabled\n");
- goto out;
+ struct drm_gem_object *pwrctx;
+
+ pwrctx = intel_alloc_power_context(dev);
+ if (pwrctx) {
+ dev_priv->pwrctx = pwrctx;
+ obj_priv = pwrctx->driver_private;
}
-
- ret = i915_gem_object_pin(pwrctx, 4096);
- if (ret) {
- DRM_ERROR("failed to pin power context: %d\n",
- ret);
- drm_gem_object_unreference(pwrctx);
- goto out;
- }
-
- i915_gem_object_set_to_gtt_domain(pwrctx, 1);
-
- dev_priv->pwrctx = pwrctx;
- obj_priv = pwrctx->driver_private;
}
- I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
- I915_WRITE(MCHBAR_RENDER_STANDBY,
- I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ if (obj_priv) {
+ I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
+ I915_WRITE(MCHBAR_RENDER_STANDBY,
+ I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ }
}
-
-out:
- return;
}
/* Set up chip specific display functions */
@@ -4770,7 +4665,6 @@
del_timer_sync(&intel_crtc->idle_timer);
}
- intel_increase_renderclock(dev, false);
del_timer_sync(&dev_priv->idle_timer);
if (dev_priv->display.disable_fbc)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4e7aa8b..439506c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -125,9 +125,15 @@
/* I think this is a fiction */
static int
-intel_dp_link_required(int pixel_clock)
+intel_dp_link_required(struct drm_device *dev,
+ struct intel_output *intel_output, int pixel_clock)
{
- return pixel_clock * 3;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_eDP(intel_output))
+ return (pixel_clock * dev_priv->edp_bpp) / 8;
+ else
+ return pixel_clock * 3;
}
static int
@@ -138,7 +144,8 @@
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
int max_lanes = intel_dp_max_lane_count(intel_output);
- if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+ > max_link_clock * max_lanes)
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
@@ -492,7 +499,8 @@
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
- if (intel_dp_link_required(mode->clock) <= link_avail) {
+ if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+ <= link_avail) {
dp_priv->link_bw = bws[clock];
dp_priv->lane_count = lane_count;
adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
@@ -1289,53 +1297,7 @@
if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
intel_dp_check_link_status(intel_output);
}
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given DP is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it is assumed that the given
- * DP is present.
- */
-static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, dp_port, ret;
- if (!dev_priv->child_dev_num)
- return 1;
-
- dp_port = 0;
- if (dp_reg == DP_B || dp_reg == PCH_DP_B)
- dp_port = PORT_IDPB;
- else if (dp_reg == DP_C || dp_reg == PCH_DP_C)
- dp_port = PORT_IDPC;
- else if (dp_reg == DP_D || dp_reg == PCH_DP_D)
- dp_port = PORT_IDPD;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not DP, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_DP &&
- p_child->device_type != DEVICE_TYPE_eDP)
- continue;
- /* Find the eDP port */
- if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) {
- ret = 1;
- break;
- }
- /* Find the DP port */
- if (p_child->dvo_port == dp_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
void
intel_dp_init(struct drm_device *dev, int output_reg)
{
@@ -1345,10 +1307,6 @@
struct intel_dp_priv *dp_priv;
const char *name = NULL;
- if (!dp_is_present_in_vbt(dev, output_reg)) {
- DRM_DEBUG_KMS("DP is not present. Ignore it\n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
if (!intel_output)
@@ -1373,11 +1331,10 @@
else if (output_reg == DP_D || output_reg == PCH_DP_D)
intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
- if (IS_eDP(intel_output)) {
- intel_output->crtc_mask = (1 << 1);
+ if (IS_eDP(intel_output))
intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
- } else
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
@@ -1402,14 +1359,20 @@
break;
case DP_B:
case PCH_DP_B:
+ dev_priv->hotplug_supported_mask |=
+ HDMIB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case DP_C:
case PCH_DP_C:
+ dev_priv->hotplug_supported_mask |=
+ HDMIC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case DP_D:
case PCH_DP_D:
+ dev_priv->hotplug_supported_mask |=
+ HDMID_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index f04dbbe..0e268de 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -225,52 +225,6 @@
.destroy = intel_hdmi_enc_destroy,
};
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given HDMI is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it assumes that the given
- * HDMI is present.
- */
-static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, hdmi_port, ret;
-
- if (!dev_priv->child_dev_num)
- return 1;
-
- if (hdmi_reg == SDVOB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == SDVOC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMIB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == HDMIC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMID)
- hdmi_port = DVO_D;
- else
- return 0;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not HDMI, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_HDMI)
- continue;
- /* Find the HDMI port */
- if (p_child->dvo_port == hdmi_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -278,10 +232,6 @@
struct intel_output *intel_output;
struct intel_hdmi_priv *hdmi_priv;
- if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) {
- DRM_DEBUG_KMS("HDMI is not present. Ignored it \n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
if (!intel_output)
@@ -303,21 +253,26 @@
if (sdvox_reg == SDVOB) {
intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
+ dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
}
if (!intel_output->ddc_bus)
goto err_connector;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 3118ce2..aa74e59 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -602,12 +602,33 @@
/* Some lid devices report incorrect lid status, assume they're connected */
static const struct dmi_system_id bad_lid_status[] = {
{
+ .ident = "Compaq nx9020",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "3084"),
+ },
+ },
+ {
+ .ident = "Samsung SX20S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+ },
+ },
+ {
.ident = "Aspire One",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
},
},
+ {
+ .ident = "PC-81005",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
+ },
+ },
{ }
};
@@ -679,7 +700,14 @@
struct drm_i915_private *dev_priv =
container_of(nb, struct drm_i915_private, lid_notifier);
struct drm_device *dev = dev_priv->dev;
+ struct drm_connector *connector = dev_priv->int_lvds_connector;
+ /*
+ * check and update the status of LVDS connector after receiving
+ * the LID nofication event.
+ */
+ if (connector)
+ connector->status = connector->funcs->detect(connector);
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
@@ -854,65 +882,6 @@
{ } /* terminating entry */
};
-#ifdef CONFIG_ACPI
-/*
- * check_lid_device -- check whether @handle is an ACPI LID device.
- * @handle: ACPI device handle
- * @level : depth in the ACPI namespace tree
- * @context: the number of LID device when we find the device
- * @rv: a return value to fill if desired (Not use)
- */
-static acpi_status
-check_lid_device(acpi_handle handle, u32 level, void *context,
- void **return_value)
-{
- struct acpi_device *acpi_dev;
- int *lid_present = context;
-
- acpi_dev = NULL;
- /* Get the acpi device for device handle */
- if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
- /* If there is no ACPI device for handle, return */
- return AE_OK;
- }
-
- if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
- *lid_present = 1;
-
- return AE_OK;
-}
-
-/**
- * check whether there exists the ACPI LID device by enumerating the ACPI
- * device tree.
- */
-static int intel_lid_present(void)
-{
- int lid_present = 0;
-
- if (acpi_disabled) {
- /* If ACPI is disabled, there is no ACPI device tree to
- * check, so assume the LID device would have been present.
- */
- return 1;
- }
-
- acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- check_lid_device, NULL, &lid_present, NULL);
-
- return lid_present;
-}
-#else
-static int intel_lid_present(void)
-{
- /* In the absence of ACPI built in, assume that the LID device would
- * have been present.
- */
- return 1;
-}
-#endif
-
/**
* intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
* @dev: drm device
@@ -957,7 +926,8 @@
}
}
mutex_unlock(&dev->mode_config.mutex);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
/* We found the downclock for LVDS. */
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
@@ -1031,12 +1001,8 @@
if (dmi_check_system(intel_no_lvds))
return;
- /*
- * Assume LVDS is present if there's an ACPI lid device or if the
- * device is present in the VBT.
- */
- if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) {
- DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n");
+ if (!lvds_is_present_in_vbt(dev)) {
+ DRM_DEBUG_KMS("LVDS is not present in VBT\n");
return;
}
@@ -1180,6 +1146,8 @@
DRM_DEBUG_KMS("lid notifier registration failed\n");
dev_priv->lid_notifier.notifier_call = NULL;
}
+ /* keep the LVDS connector */
+ dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
return;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 24a3dc9..eaacfd0 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -462,14 +462,63 @@
}
/**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
+ * Try to read the response after issuie the DDC switch command. But it
+ * is noted that we must do the action of reading response and issuing DDC
+ * switch command in one I2C transaction. Otherwise when we try to start
+ * another I2C transaction after issuing the DDC bus switch, it will be
+ * switched to the internal SDVO register.
*/
static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
u8 target)
{
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 2,
+ .buf = out_buf,
+ },
+ /* the following two are to read the response */
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 1,
+ .buf = cmd_buf,
+ },
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = ret_value,
+ },
+ };
+
+ intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+ &target, 1);
+ /* write the DDC switch command argument */
+ intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+
+ out_buf[0] = SDVO_I2C_OPCODE;
+ out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
+ cmd_buf[0] = SDVO_I2C_CMD_STATUS;
+ cmd_buf[1] = 0;
+ ret_value[0] = 0;
+ ret_value[1] = 0;
+
+ ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+ if (ret != 3) {
+ /* failure in I2C transfer */
+ DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+ return;
+ }
+ if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("DDC switch command returns response %d\n",
+ ret_value[0]);
+ return;
+ }
+ return;
}
static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
@@ -1579,6 +1628,32 @@
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
+ /* This is only applied to SDVO cards with multiple outputs */
+ if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+ uint8_t saved_ddc, temp_ddc;
+ saved_ddc = sdvo_priv->ddc_bus;
+ temp_ddc = sdvo_priv->ddc_bus >> 1;
+ /*
+ * Don't use the 1 as the argument of DDC bus switch to get
+ * the EDID. It is used for SDVO SPD ROM.
+ */
+ while(temp_ddc > 1) {
+ sdvo_priv->ddc_bus = temp_ddc;
+ edid = drm_get_edid(&intel_output->base,
+ intel_output->ddc_bus);
+ if (edid) {
+ /*
+ * When we can get the EDID, maybe it is the
+ * correct DDC bus. Update it.
+ */
+ sdvo_priv->ddc_bus = temp_ddc;
+ break;
+ }
+ temp_ddc >>= 1;
+ }
+ if (edid == NULL)
+ sdvo_priv->ddc_bus = saved_ddc;
+ }
/* when there is no edid and no monitor is connected with VGA
* port, try to use the CRT ddc to read the EDID for DVI-connector
*/
@@ -2662,6 +2737,7 @@
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
@@ -2708,10 +2784,12 @@
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOB/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
} else {
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOC/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
}
if (intel_output->ddc_bus == NULL)
diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
index b1bc1ea..1175429 100644
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -30,12 +30,11 @@
via debugfs.
menu "I2C encoder or helper chips"
- depends on DRM && I2C
+ depends on DRM && DRM_KMS_HELPER && I2C
config DRM_I2C_CH7006
tristate "Chrontel ch7006 TV encoder"
- depends on DRM_NOUVEAU
- default m
+ default m if DRM_NOUVEAU
help
Support for Chrontel ch7006 and similar TV encoders, found
on some nVidia video cards.
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 0cad6d8..e342a41 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -33,10 +33,13 @@
#include "nouveau_drv.h"
#include "nouveau_dma.h"
+#include <linux/log2.h>
+
static void
nouveau_bo_del_ttm(struct ttm_buffer_object *bo)
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct drm_device *dev = dev_priv->dev;
struct nouveau_bo *nvbo = nouveau_bo(bo);
ttm_bo_kunmap(&nvbo->kmap);
@@ -44,12 +47,87 @@
if (unlikely(nvbo->gem))
DRM_ERROR("bo %p still attached to GEM object\n", bo);
+ if (nvbo->tile)
+ nv10_mem_expire_tiling(dev, nvbo->tile, NULL);
+
spin_lock(&dev_priv->ttm.bo_list_lock);
list_del(&nvbo->head);
spin_unlock(&dev_priv->ttm.bo_list_lock);
kfree(nvbo);
}
+static void
+nouveau_bo_fixup_align(struct drm_device *dev,
+ uint32_t tile_mode, uint32_t tile_flags,
+ int *align, int *size)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ /*
+ * Some of the tile_flags have a periodic structure of N*4096 bytes,
+ * align to to that as well as the page size. Overallocate memory to
+ * avoid corruption of other buffer objects.
+ */
+ if (dev_priv->card_type == NV_50) {
+ uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15;
+ int i;
+
+ switch (tile_flags) {
+ case 0x1800:
+ case 0x2800:
+ case 0x4800:
+ case 0x7a00:
+ *size = roundup(*size, block_size);
+ if (is_power_of_2(block_size)) {
+ *size += 3 * block_size;
+ for (i = 1; i < 10; i++) {
+ *align = 12 * i * block_size;
+ if (!(*align % 65536))
+ break;
+ }
+ } else {
+ *size += 6 * block_size;
+ for (i = 1; i < 10; i++) {
+ *align = 8 * i * block_size;
+ if (!(*align % 65536))
+ break;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ } else {
+ if (tile_mode) {
+ if (dev_priv->chipset >= 0x40) {
+ *align = 65536;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x30) {
+ *align = 32768;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x20) {
+ *align = 16384;
+ *size = roundup(*size, 64 * tile_mode);
+
+ } else if (dev_priv->chipset >= 0x10) {
+ *align = 16384;
+ *size = roundup(*size, 32 * tile_mode);
+ }
+ }
+ }
+
+ /* ALIGN works only on powers of two. */
+ *size = roundup(*size, PAGE_SIZE);
+
+ if (dev_priv->card_type == NV_50) {
+ *size = roundup(*size, 65536);
+ *align = max(65536, *align);
+ }
+}
+
int
nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan,
int size, int align, uint32_t flags, uint32_t tile_mode,
@@ -58,7 +136,7 @@
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_bo *nvbo;
- int ret, n = 0;
+ int ret = 0;
nvbo = kzalloc(sizeof(struct nouveau_bo), GFP_KERNEL);
if (!nvbo)
@@ -70,59 +148,14 @@
nvbo->tile_mode = tile_mode;
nvbo->tile_flags = tile_flags;
- /*
- * Some of the tile_flags have a periodic structure of N*4096 bytes,
- * align to to that as well as the page size. Overallocate memory to
- * avoid corruption of other buffer objects.
- */
- switch (tile_flags) {
- case 0x1800:
- case 0x2800:
- case 0x4800:
- case 0x7a00:
- if (dev_priv->chipset >= 0xA0) {
- /* This is based on high end cards with 448 bits
- * memory bus, could be different elsewhere.*/
- size += 6 * 28672;
- /* 8 * 28672 is the actual alignment requirement,
- * but we must also align to page size. */
- align = 2 * 8 * 28672;
- } else if (dev_priv->chipset >= 0x90) {
- size += 3 * 16384;
- align = 12 * 16834;
- } else {
- size += 3 * 8192;
- /* 12 * 8192 is the actual alignment requirement,
- * but we must also align to page size. */
- align = 2 * 12 * 8192;
- }
- break;
- default:
- break;
- }
-
+ nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size);
align >>= PAGE_SHIFT;
- size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- if (dev_priv->card_type == NV_50) {
- size = (size + 65535) & ~65535;
- if (align < (65536 / PAGE_SIZE))
- align = (65536 / PAGE_SIZE);
- }
-
- if (flags & TTM_PL_FLAG_VRAM)
- nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING;
- if (flags & TTM_PL_FLAG_TT)
- nvbo->placements[n++] = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
nvbo->placement.fpfn = 0;
nvbo->placement.lpfn = mappable ? dev_priv->fb_mappable_pages : 0;
- nvbo->placement.placement = nvbo->placements;
- nvbo->placement.busy_placement = nvbo->placements;
- nvbo->placement.num_placement = n;
- nvbo->placement.num_busy_placement = n;
+ nouveau_bo_placement_set(nvbo, flags);
nvbo->channel = chan;
- nouveau_bo_placement_set(nvbo, flags);
ret = ttm_bo_init(&dev_priv->ttm.bdev, &nvbo->bo, size,
ttm_bo_type_device, &nvbo->placement, align, 0,
false, NULL, size, nouveau_bo_del_ttm);
@@ -421,6 +454,7 @@
/* GPU-assisted copy using NV_MEMORY_TO_MEMORY_FORMAT, can access
* TTM_PL_{VRAM,TT} directly.
*/
+
static int
nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan,
struct nouveau_bo *nvbo, bool evict, bool no_wait,
@@ -455,11 +489,12 @@
}
static int
-nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait,
- struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem)
+nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, bool intr,
+ int no_wait, struct ttm_mem_reg *new_mem)
{
struct nouveau_bo *nvbo = nouveau_bo(bo);
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct ttm_mem_reg *old_mem = &bo->mem;
struct nouveau_channel *chan;
uint64_t src_offset, dst_offset;
uint32_t page_count;
@@ -547,7 +582,7 @@
placement.fpfn = placement.lpfn = 0;
placement.num_placement = placement.num_busy_placement = 1;
- placement.placement = &placement_memtype;
+ placement.placement = placement.busy_placement = &placement_memtype;
tmp_mem = *new_mem;
tmp_mem.mm_node = NULL;
@@ -559,7 +594,7 @@
if (ret)
goto out;
- ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, &tmp_mem);
+ ret = nouveau_bo_move_m2mf(bo, true, intr, no_wait, &tmp_mem);
if (ret)
goto out;
@@ -585,7 +620,7 @@
placement.fpfn = placement.lpfn = 0;
placement.num_placement = placement.num_busy_placement = 1;
- placement.placement = &placement_memtype;
+ placement.placement = placement.busy_placement = &placement_memtype;
tmp_mem = *new_mem;
tmp_mem.mm_node = NULL;
@@ -597,7 +632,7 @@
if (ret)
goto out;
- ret = nouveau_bo_move_m2mf(bo, true, no_wait, &bo->mem, new_mem);
+ ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem);
if (ret)
goto out;
@@ -612,52 +647,106 @@
}
static int
-nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr,
- bool no_wait, struct ttm_mem_reg *new_mem)
+nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem,
+ struct nouveau_tile_reg **new_tile)
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
- struct nouveau_bo *nvbo = nouveau_bo(bo);
struct drm_device *dev = dev_priv->dev;
- struct ttm_mem_reg *old_mem = &bo->mem;
+ struct nouveau_bo *nvbo = nouveau_bo(bo);
+ uint64_t offset;
int ret;
- if (dev_priv->card_type == NV_50 && new_mem->mem_type == TTM_PL_VRAM &&
- !nvbo->no_vm) {
- uint64_t offset = new_mem->mm_node->start << PAGE_SHIFT;
+ if (nvbo->no_vm || new_mem->mem_type != TTM_PL_VRAM) {
+ /* Nothing to do. */
+ *new_tile = NULL;
+ return 0;
+ }
+ offset = new_mem->mm_node->start << PAGE_SHIFT;
+
+ if (dev_priv->card_type == NV_50) {
ret = nv50_mem_vm_bind_linear(dev,
offset + dev_priv->vm_vram_base,
new_mem->size, nvbo->tile_flags,
offset);
if (ret)
return ret;
+
+ } else if (dev_priv->card_type >= NV_10) {
+ *new_tile = nv10_mem_set_tiling(dev, offset, new_mem->size,
+ nvbo->tile_mode);
}
- if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE ||
- !dev_priv->channel)
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ return 0;
+}
+static void
+nouveau_bo_vm_cleanup(struct ttm_buffer_object *bo,
+ struct nouveau_tile_reg *new_tile,
+ struct nouveau_tile_reg **old_tile)
+{
+ struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct drm_device *dev = dev_priv->dev;
+
+ if (dev_priv->card_type >= NV_10 &&
+ dev_priv->card_type < NV_50) {
+ if (*old_tile)
+ nv10_mem_expire_tiling(dev, *old_tile, bo->sync_obj);
+
+ *old_tile = new_tile;
+ }
+}
+
+static int
+nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr,
+ bool no_wait, struct ttm_mem_reg *new_mem)
+{
+ struct drm_nouveau_private *dev_priv = nouveau_bdev(bo->bdev);
+ struct nouveau_bo *nvbo = nouveau_bo(bo);
+ struct ttm_mem_reg *old_mem = &bo->mem;
+ struct nouveau_tile_reg *new_tile = NULL;
+ int ret = 0;
+
+ ret = nouveau_bo_vm_bind(bo, new_mem, &new_tile);
+ if (ret)
+ return ret;
+
+ /* Software copy if the card isn't up and running yet. */
+ if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE ||
+ !dev_priv->channel) {
+ ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ goto out;
+ }
+
+ /* Fake bo copy. */
if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) {
BUG_ON(bo->mem.mm_node != NULL);
bo->mem = *new_mem;
new_mem->mm_node = NULL;
- return 0;
+ goto out;
}
- if (new_mem->mem_type == TTM_PL_SYSTEM) {
- if (old_mem->mem_type == TTM_PL_SYSTEM)
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- if (nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- } else if (old_mem->mem_type == TTM_PL_SYSTEM) {
- if (nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- } else {
- if (nouveau_bo_move_m2mf(bo, evict, no_wait, old_mem, new_mem))
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
- }
+ /* Hardware assisted copy. */
+ if (new_mem->mem_type == TTM_PL_SYSTEM)
+ ret = nouveau_bo_move_flipd(bo, evict, intr, no_wait, new_mem);
+ else if (old_mem->mem_type == TTM_PL_SYSTEM)
+ ret = nouveau_bo_move_flips(bo, evict, intr, no_wait, new_mem);
+ else
+ ret = nouveau_bo_move_m2mf(bo, evict, intr, no_wait, new_mem);
- return 0;
+ if (!ret)
+ goto out;
+
+ /* Fallback to software copy. */
+ ret = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+
+out:
+ if (ret)
+ nouveau_bo_vm_cleanup(bo, NULL, &new_tile);
+ else
+ nouveau_bo_vm_cleanup(bo, new_tile, &nvbo->tile);
+
+ return ret;
}
static int
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index 9aaa972..343d718 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -158,6 +158,8 @@
return ret;
}
+ nouveau_dma_pre_init(chan);
+
/* Locate channel's user control regs */
if (dev_priv->card_type < NV_40)
user = NV03_USER(channel);
@@ -235,47 +237,6 @@
return 0;
}
-int
-nouveau_channel_idle(struct nouveau_channel *chan)
-{
- struct drm_device *dev = chan->dev;
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_engine *engine = &dev_priv->engine;
- uint32_t caches;
- int idle;
-
- if (!chan) {
- NV_ERROR(dev, "no channel...\n");
- return 1;
- }
-
- caches = nv_rd32(dev, NV03_PFIFO_CACHES);
- nv_wr32(dev, NV03_PFIFO_CACHES, caches & ~1);
-
- if (engine->fifo.channel_id(dev) != chan->id) {
- struct nouveau_gpuobj *ramfc =
- chan->ramfc ? chan->ramfc->gpuobj : NULL;
-
- if (!ramfc) {
- NV_ERROR(dev, "No RAMFC for channel %d\n", chan->id);
- return 1;
- }
-
- engine->instmem.prepare_access(dev, false);
- if (nv_ro32(dev, ramfc, 0) != nv_ro32(dev, ramfc, 1))
- idle = 0;
- else
- idle = 1;
- engine->instmem.finish_access(dev);
- } else {
- idle = (nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET) ==
- nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT));
- }
-
- nv_wr32(dev, NV03_PFIFO_CACHES, caches);
- return idle;
-}
-
/* stops a fifo */
void
nouveau_channel_free(struct nouveau_channel *chan)
@@ -414,7 +375,9 @@
init->subchan[0].grclass = 0x0039;
else
init->subchan[0].grclass = 0x5039;
- init->nr_subchan = 1;
+ init->subchan[1].handle = NvSw;
+ init->subchan[1].grclass = NV_SW;
+ init->nr_subchan = 2;
/* Named memory object area */
ret = drm_gem_handle_create(file_priv, chan->notifier_bo->gem,
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c
index 7035536..7afbe8b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.c
@@ -29,12 +29,22 @@
#include "nouveau_drv.h"
#include "nouveau_dma.h"
+void
+nouveau_dma_pre_init(struct nouveau_channel *chan)
+{
+ chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2;
+ chan->dma.put = 0;
+ chan->dma.cur = chan->dma.put;
+ chan->dma.free = chan->dma.max - chan->dma.cur;
+}
+
int
nouveau_dma_init(struct nouveau_channel *chan)
{
struct drm_device *dev = chan->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_gpuobj *m2mf = NULL;
+ struct nouveau_gpuobj *nvsw = NULL;
int ret, i;
/* Create NV_MEMORY_TO_MEMORY_FORMAT for buffer moves */
@@ -47,6 +57,15 @@
if (ret)
return ret;
+ /* Create an NV_SW object for various sync purposes */
+ ret = nouveau_gpuobj_sw_new(chan, NV_SW, &nvsw);
+ if (ret)
+ return ret;
+
+ ret = nouveau_gpuobj_ref_add(dev, chan, NvSw, nvsw, NULL);
+ if (ret)
+ return ret;
+
/* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */
ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy);
if (ret)
@@ -64,12 +83,6 @@
return ret;
}
- /* Initialise DMA vars */
- chan->dma.max = (chan->pushbuf_bo->bo.mem.size >> 2) - 2;
- chan->dma.put = 0;
- chan->dma.cur = chan->dma.put;
- chan->dma.free = chan->dma.max - chan->dma.cur;
-
/* Insert NOPS for NOUVEAU_DMA_SKIPS */
ret = RING_SPACE(chan, NOUVEAU_DMA_SKIPS);
if (ret)
@@ -87,6 +100,13 @@
BEGIN_RING(chan, NvSubM2MF, NV_MEMORY_TO_MEMORY_FORMAT_DMA_NOTIFY, 1);
OUT_RING(chan, NvNotify0);
+ /* Initialise NV_SW */
+ ret = RING_SPACE(chan, 2);
+ if (ret)
+ return ret;
+ BEGIN_RING(chan, NvSubSw, 0, 1);
+ OUT_RING(chan, NvSw);
+
/* Sit back and pray the channel works.. */
FIRE_RING(chan);
@@ -113,7 +133,7 @@
val = nvchan_rd32(chan, chan->user_get);
if (val < chan->pushbuf_base ||
- val >= chan->pushbuf_base + chan->pushbuf_bo->bo.mem.size) {
+ val > chan->pushbuf_base + (chan->dma.max << 2)) {
/* meaningless to dma_wait() except to know whether the
* GPU has stalled or not
*/
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.h b/drivers/gpu/drm/nouveau/nouveau_dma.h
index 04e85d8..dabfd65 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.h
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.h
@@ -46,10 +46,11 @@
/* Hardcoded object assignments to subchannels (subchannel id). */
enum {
NvSubM2MF = 0,
- NvSub2D = 1,
- NvSubCtxSurf2D = 1,
- NvSubGdiRect = 2,
- NvSubImageBlit = 3
+ NvSubSw = 1,
+ NvSub2D = 2,
+ NvSubCtxSurf2D = 2,
+ NvSubGdiRect = 3,
+ NvSubImageBlit = 4
};
/* Object handles. */
@@ -67,6 +68,7 @@
NvClipRect = 0x8000000b,
NvGdiRect = 0x8000000c,
NvImageBlit = 0x8000000d,
+ NvSw = 0x8000000e,
/* G80+ display objects */
NvEvoVRAM = 0x01000000,
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5f8cbb7..026419f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -59,11 +59,19 @@
#define MAX_NUM_DCB_ENTRIES 16
#define NOUVEAU_MAX_CHANNEL_NR 128
+#define NOUVEAU_MAX_TILE_NR 15
#define NV50_VM_MAX_VRAM (2*1024*1024*1024ULL)
#define NV50_VM_BLOCK (512*1024*1024ULL)
#define NV50_VM_VRAM_NR (NV50_VM_MAX_VRAM / NV50_VM_BLOCK)
+struct nouveau_tile_reg {
+ struct nouveau_fence *fence;
+ uint32_t addr;
+ uint32_t size;
+ bool used;
+};
+
struct nouveau_bo {
struct ttm_buffer_object bo;
struct ttm_placement placement;
@@ -83,6 +91,7 @@
uint32_t tile_mode;
uint32_t tile_flags;
+ struct nouveau_tile_reg *tile;
struct drm_gem_object *gem;
struct drm_file *cpu_filp;
@@ -277,8 +286,13 @@
};
struct nouveau_fb_engine {
+ int num_tiles;
+
int (*init)(struct drm_device *dev);
void (*takedown)(struct drm_device *dev);
+
+ void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch);
};
struct nouveau_fifo_engine {
@@ -292,6 +306,8 @@
void (*disable)(struct drm_device *);
void (*enable)(struct drm_device *);
bool (*reassign)(struct drm_device *, bool enable);
+ bool (*cache_flush)(struct drm_device *dev);
+ bool (*cache_pull)(struct drm_device *dev, bool enable);
int (*channel_id)(struct drm_device *);
@@ -330,6 +346,9 @@
void (*destroy_context)(struct nouveau_channel *);
int (*load_context)(struct nouveau_channel *);
int (*unload_context)(struct drm_device *);
+
+ void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch);
};
struct nouveau_engine {
@@ -548,6 +567,12 @@
unsigned long sg_handle;
} gart_info;
+ /* nv10-nv40 tiling regions */
+ struct {
+ struct nouveau_tile_reg reg[NOUVEAU_MAX_TILE_NR];
+ spinlock_t lock;
+ } tile;
+
/* G8x/G9x virtual address space */
uint64_t vm_gart_base;
uint64_t vm_gart_size;
@@ -685,6 +710,13 @@
extern int nouveau_mem_init(struct drm_device *);
extern int nouveau_mem_init_agp(struct drm_device *);
extern void nouveau_mem_close(struct drm_device *);
+extern struct nouveau_tile_reg *nv10_mem_set_tiling(struct drm_device *dev,
+ uint32_t addr,
+ uint32_t size,
+ uint32_t pitch);
+extern void nv10_mem_expire_tiling(struct drm_device *dev,
+ struct nouveau_tile_reg *tile,
+ struct nouveau_fence *fence);
extern int nv50_mem_vm_bind_linear(struct drm_device *, uint64_t virt,
uint32_t size, uint32_t flags,
uint64_t phys);
@@ -713,7 +745,6 @@
struct drm_file *file_priv,
uint32_t fb_ctxdma, uint32_t tt_ctxdma);
extern void nouveau_channel_free(struct nouveau_channel *);
-extern int nouveau_channel_idle(struct nouveau_channel *chan);
/* nouveau_object.c */
extern int nouveau_gpuobj_early_init(struct drm_device *);
@@ -756,6 +787,8 @@
uint32_t *o_ret);
extern int nouveau_gpuobj_gr_new(struct nouveau_channel *, int class,
struct nouveau_gpuobj **);
+extern int nouveau_gpuobj_sw_new(struct nouveau_channel *, int class,
+ struct nouveau_gpuobj **);
extern int nouveau_ioctl_grobj_alloc(struct drm_device *, void *data,
struct drm_file *);
extern int nouveau_ioctl_gpuobj_free(struct drm_device *, void *data,
@@ -804,6 +837,7 @@
#endif
/* nouveau_dma.c */
+extern void nouveau_dma_pre_init(struct nouveau_channel *);
extern int nouveau_dma_init(struct nouveau_channel *);
extern int nouveau_dma_wait(struct nouveau_channel *, int size);
@@ -879,16 +913,22 @@
/* nv10_fb.c */
extern int nv10_fb_init(struct drm_device *);
extern void nv10_fb_takedown(struct drm_device *);
+extern void nv10_fb_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv40_fb.c */
extern int nv40_fb_init(struct drm_device *);
extern void nv40_fb_takedown(struct drm_device *);
+extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv04_fifo.c */
extern int nv04_fifo_init(struct drm_device *);
extern void nv04_fifo_disable(struct drm_device *);
extern void nv04_fifo_enable(struct drm_device *);
extern bool nv04_fifo_reassign(struct drm_device *, bool);
+extern bool nv04_fifo_cache_flush(struct drm_device *);
+extern bool nv04_fifo_cache_pull(struct drm_device *, bool);
extern int nv04_fifo_channel_id(struct drm_device *);
extern int nv04_fifo_create_context(struct nouveau_channel *);
extern void nv04_fifo_destroy_context(struct nouveau_channel *);
@@ -941,6 +981,8 @@
extern int nv10_graph_load_context(struct nouveau_channel *);
extern int nv10_graph_unload_context(struct drm_device *);
extern void nv10_graph_context_switch(struct drm_device *);
+extern void nv10_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv20_graph.c */
extern struct nouveau_pgraph_object_class nv20_graph_grclass[];
@@ -952,6 +994,8 @@
extern int nv20_graph_init(struct drm_device *);
extern void nv20_graph_takedown(struct drm_device *);
extern int nv30_graph_init(struct drm_device *);
+extern void nv20_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv40_graph.c */
extern struct nouveau_pgraph_object_class nv40_graph_grclass[];
@@ -963,6 +1007,8 @@
extern int nv40_graph_load_context(struct nouveau_channel *);
extern int nv40_graph_unload_context(struct drm_device *);
extern void nv40_grctx_init(struct nouveau_grctx *);
+extern void nv40_graph_set_region_tiling(struct drm_device *, int, uint32_t,
+ uint32_t, uint32_t);
/* nv50_graph.c */
extern struct nouveau_pgraph_object_class nv50_graph_grclass[];
@@ -1030,8 +1076,7 @@
/* nv04_dac.c */
extern int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry);
-extern enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder,
- struct drm_connector *connector);
+extern uint32_t nv17_dac_sample_load(struct drm_encoder *encoder);
extern int nv04_dac_output_offset(struct drm_encoder *encoder);
extern void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable);
@@ -1049,9 +1094,6 @@
/* nv17_tv.c */
extern int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry);
-extern enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder,
- struct drm_connector *connector,
- uint32_t pin_mask);
/* nv04_display.c */
extern int nv04_display_create(struct drm_device *);
@@ -1290,14 +1332,14 @@
return false;
}
-#define NV50_NVSW 0x0000506e
-#define NV50_NVSW_DMA_SEMAPHORE 0x00000060
-#define NV50_NVSW_SEMAPHORE_OFFSET 0x00000064
-#define NV50_NVSW_SEMAPHORE_ACQUIRE 0x00000068
-#define NV50_NVSW_SEMAPHORE_RELEASE 0x0000006c
-#define NV50_NVSW_DMA_VBLSEM 0x0000018c
-#define NV50_NVSW_VBLSEM_OFFSET 0x00000400
-#define NV50_NVSW_VBLSEM_RELEASE_VALUE 0x00000404
-#define NV50_NVSW_VBLSEM_RELEASE 0x00000408
+#define NV_SW 0x0000506e
+#define NV_SW_DMA_SEMAPHORE 0x00000060
+#define NV_SW_SEMAPHORE_OFFSET 0x00000064
+#define NV_SW_SEMAPHORE_ACQUIRE 0x00000068
+#define NV_SW_SEMAPHORE_RELEASE 0x0000006c
+#define NV_SW_DMA_VBLSEM 0x0000018c
+#define NV_SW_VBLSEM_OFFSET 0x00000400
+#define NV_SW_VBLSEM_RELEASE_VALUE 0x00000404
+#define NV_SW_VBLSEM_RELEASE 0x00000408
#endif /* __NOUVEAU_DRV_H__ */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 84af25c..0b05c86 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -64,8 +64,7 @@
return 0;
if (RING_SPACE(chan, 4)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
@@ -86,8 +85,7 @@
}
if (ret) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
@@ -212,11 +210,11 @@
mode_cmd.bpp = surface_bpp;
mode_cmd.pitch = mode_cmd.width * (mode_cmd.bpp >> 3);
- mode_cmd.pitch = ALIGN(mode_cmd.pitch, 256);
+ mode_cmd.pitch = roundup(mode_cmd.pitch, 256);
mode_cmd.depth = surface_depth;
size = mode_cmd.pitch * mode_cmd.height;
- size = ALIGN(size, PAGE_SIZE);
+ size = roundup(size, PAGE_SIZE);
ret = nouveau_gem_new(dev, dev_priv->channel, size, 0, TTM_PL_FLAG_VRAM,
0, 0x0000, false, true, &nvbo);
@@ -380,3 +378,12 @@
return 0;
}
+
+void nouveau_fbcon_gpu_lockup(struct fb_info *info)
+{
+ struct nouveau_fbcon_par *par = info->par;
+ struct drm_device *dev = par->dev;
+
+ NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
index 8531140..462e0b8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
@@ -43,5 +43,6 @@
int nv04_fbcon_accel_init(struct fb_info *info);
int nv50_fbcon_accel_init(struct fb_info *info);
+void nouveau_fbcon_gpu_lockup(struct fb_info *info);
#endif /* __NV50_FBCON_H__ */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index dacac9a..faddf53 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -142,7 +142,7 @@
list_add_tail(&fence->entry, &chan->fence.pending);
spin_unlock_irqrestore(&chan->fence.lock, flags);
- BEGIN_RING(chan, NvSubM2MF, USE_REFCNT ? 0x0050 : 0x0150, 1);
+ BEGIN_RING(chan, NvSubSw, USE_REFCNT ? 0x0050 : 0x0150, 1);
OUT_RING(chan, fence->sequence);
FIRE_RING(chan);
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 18fd8ac..2009db2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -220,7 +220,6 @@
}
struct validate_op {
- struct nouveau_fence *fence;
struct list_head vram_list;
struct list_head gart_list;
struct list_head both_list;
@@ -252,17 +251,11 @@
}
static void
-validate_fini(struct validate_op *op, bool success)
+validate_fini(struct validate_op *op, struct nouveau_fence* fence)
{
- struct nouveau_fence *fence = op->fence;
-
- if (unlikely(!success))
- op->fence = NULL;
-
- validate_fini_list(&op->vram_list, op->fence);
- validate_fini_list(&op->gart_list, op->fence);
- validate_fini_list(&op->both_list, op->fence);
- nouveau_fence_unref((void *)&fence);
+ validate_fini_list(&op->vram_list, fence);
+ validate_fini_list(&op->gart_list, fence);
+ validate_fini_list(&op->both_list, fence);
}
static int
@@ -420,10 +413,6 @@
INIT_LIST_HEAD(&op->gart_list);
INIT_LIST_HEAD(&op->both_list);
- ret = nouveau_fence_new(chan, &op->fence, false);
- if (ret)
- return ret;
-
if (nr_buffers == 0)
return 0;
@@ -541,6 +530,7 @@
struct drm_nouveau_gem_pushbuf_bo *bo = NULL;
struct nouveau_channel *chan;
struct validate_op op;
+ struct nouveau_fence* fence = 0;
uint32_t *pushbuf = NULL;
int ret = 0, do_reloc = 0, i;
@@ -597,7 +587,7 @@
OUT_RINGp(chan, pushbuf, req->nr_dwords);
- ret = nouveau_fence_emit(op.fence);
+ ret = nouveau_fence_new(chan, &fence, true);
if (ret) {
NV_ERROR(dev, "error fencing pushbuf: %d\n", ret);
WIND_RING(chan);
@@ -605,7 +595,7 @@
}
if (nouveau_gem_pushbuf_sync(chan)) {
- ret = nouveau_fence_wait(op.fence, NULL, false, false);
+ ret = nouveau_fence_wait(fence, NULL, false, false);
if (ret) {
for (i = 0; i < req->nr_dwords; i++)
NV_ERROR(dev, "0x%08x\n", pushbuf[i]);
@@ -614,7 +604,8 @@
}
out:
- validate_fini(&op, ret == 0);
+ validate_fini(&op, fence);
+ nouveau_fence_unref((void**)&fence);
mutex_unlock(&dev->struct_mutex);
kfree(pushbuf);
kfree(bo);
@@ -634,6 +625,7 @@
struct drm_gem_object *gem;
struct nouveau_bo *pbbo;
struct validate_op op;
+ struct nouveau_fence* fence = 0;
int i, ret = 0, do_reloc = 0;
NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
@@ -772,7 +764,7 @@
OUT_RING(chan, 0);
}
- ret = nouveau_fence_emit(op.fence);
+ ret = nouveau_fence_new(chan, &fence, true);
if (ret) {
NV_ERROR(dev, "error fencing pushbuf: %d\n", ret);
WIND_RING(chan);
@@ -780,7 +772,8 @@
}
out:
- validate_fini(&op, ret == 0);
+ validate_fini(&op, fence);
+ nouveau_fence_unref((void**)&fence);
mutex_unlock(&dev->struct_mutex);
kfree(bo);
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index 370c72c..919a619 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -635,6 +635,7 @@
if ((nv_rd32(dev, 0x400500) & isb) != isb)
nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb);
+ nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
}
nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 5158a12..fb9bdd6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -192,6 +192,92 @@
}
/*
+ * NV10-NV40 tiling helpers
+ */
+
+static void
+nv10_mem_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
+ struct nouveau_tile_reg *tile = &dev_priv->tile.reg[i];
+
+ tile->addr = addr;
+ tile->size = size;
+ tile->used = !!pitch;
+ nouveau_fence_unref((void **)&tile->fence);
+
+ if (!pfifo->cache_flush(dev))
+ return;
+
+ pfifo->reassign(dev, false);
+ pfifo->cache_flush(dev);
+ pfifo->cache_pull(dev, false);
+
+ nouveau_wait_for_idle(dev);
+
+ pgraph->set_region_tiling(dev, i, addr, size, pitch);
+ pfb->set_region_tiling(dev, i, addr, size, pitch);
+
+ pfifo->cache_pull(dev, true);
+ pfifo->reassign(dev, true);
+}
+
+struct nouveau_tile_reg *
+nv10_mem_set_tiling(struct drm_device *dev, uint32_t addr, uint32_t size,
+ uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ struct nouveau_tile_reg *tile = dev_priv->tile.reg, *found = NULL;
+ int i;
+
+ spin_lock(&dev_priv->tile.lock);
+
+ for (i = 0; i < pfb->num_tiles; i++) {
+ if (tile[i].used)
+ /* Tile region in use. */
+ continue;
+
+ if (tile[i].fence &&
+ !nouveau_fence_signalled(tile[i].fence, NULL))
+ /* Pending tile region. */
+ continue;
+
+ if (max(tile[i].addr, addr) <
+ min(tile[i].addr + tile[i].size, addr + size))
+ /* Kill an intersecting tile region. */
+ nv10_mem_set_region_tiling(dev, i, 0, 0, 0);
+
+ if (pitch && !found) {
+ /* Free tile region. */
+ nv10_mem_set_region_tiling(dev, i, addr, size, pitch);
+ found = &tile[i];
+ }
+ }
+
+ spin_unlock(&dev_priv->tile.lock);
+
+ return found;
+}
+
+void
+nv10_mem_expire_tiling(struct drm_device *dev, struct nouveau_tile_reg *tile,
+ struct nouveau_fence *fence)
+{
+ if (fence) {
+ /* Mark it as pending. */
+ tile->fence = fence;
+ nouveau_fence_ref(fence);
+ }
+
+ tile->used = false;
+}
+
+/*
* NV50 VM helpers
*/
int
@@ -513,6 +599,7 @@
INIT_LIST_HEAD(&dev_priv->ttm.bo_list);
spin_lock_init(&dev_priv->ttm.bo_list_lock);
+ spin_lock_init(&dev_priv->tile.lock);
dev_priv->fb_available_size = nouveau_mem_fb_amount(dev);
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 93379bb..6c2cf817 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -881,7 +881,7 @@
return 0;
}
-static int
+int
nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class,
struct nouveau_gpuobj **gpuobj_ret)
{
diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h
index fa1b0e7..251f1b3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_reg.h
+++ b/drivers/gpu/drm/nouveau/nouveau_reg.h
@@ -349,19 +349,19 @@
#define NV04_PGRAPH_BLEND 0x00400824
#define NV04_PGRAPH_STORED_FMT 0x00400830
#define NV04_PGRAPH_PATT_COLORRAM 0x00400900
-#define NV40_PGRAPH_TILE0(i) (0x00400900 + (i*16))
-#define NV40_PGRAPH_TLIMIT0(i) (0x00400904 + (i*16))
-#define NV40_PGRAPH_TSIZE0(i) (0x00400908 + (i*16))
-#define NV40_PGRAPH_TSTATUS0(i) (0x0040090C + (i*16))
+#define NV20_PGRAPH_TILE(i) (0x00400900 + (i*16))
+#define NV20_PGRAPH_TLIMIT(i) (0x00400904 + (i*16))
+#define NV20_PGRAPH_TSIZE(i) (0x00400908 + (i*16))
+#define NV20_PGRAPH_TSTATUS(i) (0x0040090C + (i*16))
#define NV10_PGRAPH_TILE(i) (0x00400B00 + (i*16))
#define NV10_PGRAPH_TLIMIT(i) (0x00400B04 + (i*16))
#define NV10_PGRAPH_TSIZE(i) (0x00400B08 + (i*16))
#define NV10_PGRAPH_TSTATUS(i) (0x00400B0C + (i*16))
#define NV04_PGRAPH_U_RAM 0x00400D00
-#define NV47_PGRAPH_TILE0(i) (0x00400D00 + (i*16))
-#define NV47_PGRAPH_TLIMIT0(i) (0x00400D04 + (i*16))
-#define NV47_PGRAPH_TSIZE0(i) (0x00400D08 + (i*16))
-#define NV47_PGRAPH_TSTATUS0(i) (0x00400D0C + (i*16))
+#define NV47_PGRAPH_TILE(i) (0x00400D00 + (i*16))
+#define NV47_PGRAPH_TLIMIT(i) (0x00400D04 + (i*16))
+#define NV47_PGRAPH_TSIZE(i) (0x00400D08 + (i*16))
+#define NV47_PGRAPH_TSTATUS(i) (0x00400D0C + (i*16))
#define NV04_PGRAPH_V_RAM 0x00400D40
#define NV04_PGRAPH_W_RAM 0x00400D80
#define NV10_PGRAPH_COMBINER0_IN_ALPHA 0x00400E40
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index e76ec2d..09b9a46 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -76,6 +76,8 @@
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv04_fifo_channel_id;
engine->fifo.create_context = nv04_fifo_create_context;
engine->fifo.destroy_context = nv04_fifo_destroy_context;
@@ -100,6 +102,7 @@
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv10_graph_grclass;
engine->graph.init = nv10_graph_init;
engine->graph.takedown = nv10_graph_takedown;
@@ -109,12 +112,15 @@
engine->graph.fifo_access = nv04_graph_fifo_access;
engine->graph.load_context = nv10_graph_load_context;
engine->graph.unload_context = nv10_graph_unload_context;
+ engine->graph.set_region_tiling = nv10_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
@@ -139,6 +145,7 @@
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv20_graph_grclass;
engine->graph.init = nv20_graph_init;
engine->graph.takedown = nv20_graph_takedown;
@@ -148,12 +155,15 @@
engine->graph.fifo_access = nv04_graph_fifo_access;
engine->graph.load_context = nv20_graph_load_context;
engine->graph.unload_context = nv20_graph_unload_context;
+ engine->graph.set_region_tiling = nv20_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
@@ -178,6 +188,7 @@
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv10_fb_init;
engine->fb.takedown = nv10_fb_takedown;
+ engine->fb.set_region_tiling = nv10_fb_set_region_tiling;
engine->graph.grclass = nv30_graph_grclass;
engine->graph.init = nv30_graph_init;
engine->graph.takedown = nv20_graph_takedown;
@@ -187,12 +198,15 @@
engine->graph.destroy_context = nv20_graph_destroy_context;
engine->graph.load_context = nv20_graph_load_context;
engine->graph.unload_context = nv20_graph_unload_context;
+ engine->graph.set_region_tiling = nv20_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv10_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv10_fifo_create_context;
engine->fifo.destroy_context = nv10_fifo_destroy_context;
@@ -218,6 +232,7 @@
engine->timer.takedown = nv04_timer_takedown;
engine->fb.init = nv40_fb_init;
engine->fb.takedown = nv40_fb_takedown;
+ engine->fb.set_region_tiling = nv40_fb_set_region_tiling;
engine->graph.grclass = nv40_graph_grclass;
engine->graph.init = nv40_graph_init;
engine->graph.takedown = nv40_graph_takedown;
@@ -227,12 +242,15 @@
engine->graph.destroy_context = nv40_graph_destroy_context;
engine->graph.load_context = nv40_graph_load_context;
engine->graph.unload_context = nv40_graph_unload_context;
+ engine->graph.set_region_tiling = nv40_graph_set_region_tiling;
engine->fifo.channels = 32;
engine->fifo.init = nv40_fifo_init;
engine->fifo.takedown = nouveau_stub_takedown;
engine->fifo.disable = nv04_fifo_disable;
engine->fifo.enable = nv04_fifo_enable;
engine->fifo.reassign = nv04_fifo_reassign;
+ engine->fifo.cache_flush = nv04_fifo_cache_flush;
+ engine->fifo.cache_pull = nv04_fifo_cache_pull;
engine->fifo.channel_id = nv10_fifo_channel_id;
engine->fifo.create_context = nv40_fifo_create_context;
engine->fifo.destroy_context = nv40_fifo_destroy_context;
@@ -624,7 +642,10 @@
dev_priv->chipset = (reg0 & 0xff00000) >> 20;
/* NV04 or NV05 */
} else if ((reg0 & 0xff00fff0) == 0x20004000) {
- dev_priv->chipset = 0x04;
+ if (reg0 & 0x00f00000)
+ dev_priv->chipset = 0x05;
+ else
+ dev_priv->chipset = 0x04;
} else
dev_priv->chipset = 0xff;
@@ -704,8 +725,8 @@
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- /* In the case of an error dev_priv may not be be allocated yet */
- if (dev_priv && dev_priv->card_type)
+ /* In the case of an error dev_priv may not be allocated yet */
+ if (dev_priv)
nouveau_card_takedown(dev);
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c
index 187eb84..c385d50 100644
--- a/drivers/gpu/drm/nouveau/nouveau_ttm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c
@@ -28,45 +28,17 @@
#include "nouveau_drv.h"
-static struct vm_operations_struct nouveau_ttm_vm_ops;
-static const struct vm_operations_struct *ttm_vm_ops;
-
-static int
-nouveau_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- struct ttm_buffer_object *bo = vma->vm_private_data;
- int ret;
-
- if (unlikely(bo == NULL))
- return VM_FAULT_NOPAGE;
-
- ret = ttm_vm_ops->fault(vma, vmf);
- return ret;
-}
-
int
nouveau_ttm_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct drm_file *file_priv = filp->private_data;
struct drm_nouveau_private *dev_priv =
file_priv->minor->dev->dev_private;
- int ret;
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
return drm_mmap(filp, vma);
- ret = ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev);
- if (unlikely(ret != 0))
- return ret;
-
- if (unlikely(ttm_vm_ops == NULL)) {
- ttm_vm_ops = vma->vm_ops;
- nouveau_ttm_vm_ops = *ttm_vm_ops;
- nouveau_ttm_vm_ops.fault = &nouveau_ttm_fault;
- }
-
- vma->vm_ops = &nouveau_ttm_vm_ops;
- return 0;
+ return ttm_bo_mmap(filp, vma, &dev_priv->ttm.bdev);
}
static int
diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c
index d9f3287..d0e038d 100644
--- a/drivers/gpu/drm/nouveau/nv04_dac.c
+++ b/drivers/gpu/drm/nouveau/nv04_dac.c
@@ -212,16 +212,15 @@
return connector_status_disconnected;
}
-enum drm_connector_status nv17_dac_detect(struct drm_encoder *encoder,
- struct drm_connector *connector)
+uint32_t nv17_dac_sample_load(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
- uint32_t testval, regoffset = nv04_dac_output_offset(encoder);
+ uint32_t sample, testval, regoffset = nv04_dac_output_offset(encoder);
uint32_t saved_powerctrl_2 = 0, saved_powerctrl_4 = 0, saved_routput,
saved_rtest_ctrl, saved_gpio0, saved_gpio1, temp, routput;
- int head, present = 0;
+ int head;
#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20)
if (dcb->type == OUTPUT_TV) {
@@ -287,13 +286,7 @@
temp | NV_PRAMDAC_TEST_CONTROL_TP_INS_EN_ASSERTED);
msleep(5);
- temp = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
-
- if (dcb->type == OUTPUT_TV)
- present = (nv17_tv_detect(encoder, connector, temp)
- == connector_status_connected);
- else
- present = temp & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI;
+ sample = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
temp = NVReadRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL);
NVWriteRAMDAC(dev, head, NV_PRAMDAC_TEST_CONTROL,
@@ -310,14 +303,24 @@
nv17_gpio_set(dev, DCB_GPIO_TVDAC1, saved_gpio1);
nv17_gpio_set(dev, DCB_GPIO_TVDAC0, saved_gpio0);
- if (present) {
- NV_INFO(dev, "Load detected on output %c\n", '@' + ffs(dcb->or));
- return connector_status_connected;
- }
-
- return connector_status_disconnected;
+ return sample;
}
+static enum drm_connector_status
+nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
+ uint32_t sample = nv17_dac_sample_load(encoder);
+
+ if (sample & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
+ NV_INFO(dev, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
+ return connector_status_connected;
+ } else {
+ return connector_status_disconnected;
+ }
+}
static bool nv04_dac_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c
index 09a3107..d910873 100644
--- a/drivers/gpu/drm/nouveau/nv04_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c
@@ -39,8 +39,7 @@
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 4)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -62,14 +61,12 @@
struct drm_device *dev = par->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan = dev_priv->channel;
- uint32_t color = ((uint32_t *) info->pseudo_palette)[rect->color];
if (info->state != FBINFO_STATE_RUNNING)
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 7)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -80,7 +77,11 @@
BEGIN_RING(chan, NvSubGdiRect, 0x02fc, 1);
OUT_RING(chan, (rect->rop != ROP_COPY) ? 1 : 3);
BEGIN_RING(chan, NvSubGdiRect, 0x03fc, 1);
- OUT_RING(chan, color);
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+ OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]);
+ else
+ OUT_RING(chan, rect->color);
BEGIN_RING(chan, NvSubGdiRect, 0x0400, 2);
OUT_RING(chan, (rect->dx << 16) | rect->dy);
OUT_RING(chan, (rect->width << 16) | rect->height);
@@ -109,8 +110,7 @@
}
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 8)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -144,8 +144,7 @@
int iter_len = dsize > 128 ? 128 : dsize;
if (RING_SPACE(chan, iter_len + 1)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
cfb_imageblit(info, image);
return;
}
@@ -184,6 +183,7 @@
struct drm_device *dev = par->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan = dev_priv->channel;
+ const int sub = NvSubCtxSurf2D;
int surface_fmt, pattern_fmt, rect_fmt;
int ret;
@@ -242,30 +242,29 @@
return ret;
if (RING_SPACE(chan, 49)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
return 0;
}
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvCtxSurf2D);
- BEGIN_RING(chan, 1, 0x0184, 2);
+ BEGIN_RING(chan, sub, 0x0184, 2);
OUT_RING(chan, NvDmaFB);
OUT_RING(chan, NvDmaFB);
- BEGIN_RING(chan, 1, 0x0300, 4);
+ BEGIN_RING(chan, sub, 0x0300, 4);
OUT_RING(chan, surface_fmt);
OUT_RING(chan, info->fix.line_length | (info->fix.line_length << 16));
OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base);
OUT_RING(chan, info->fix.smem_start - dev->mode_config.fb_base);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvRop);
- BEGIN_RING(chan, 1, 0x0300, 1);
+ BEGIN_RING(chan, sub, 0x0300, 1);
OUT_RING(chan, 0x55);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvImagePatt);
- BEGIN_RING(chan, 1, 0x0300, 8);
+ BEGIN_RING(chan, sub, 0x0300, 8);
OUT_RING(chan, pattern_fmt);
#ifdef __BIG_ENDIAN
OUT_RING(chan, 2);
@@ -279,9 +278,9 @@
OUT_RING(chan, ~0);
OUT_RING(chan, ~0);
- BEGIN_RING(chan, 1, 0x0000, 1);
+ BEGIN_RING(chan, sub, 0x0000, 1);
OUT_RING(chan, NvClipRect);
- BEGIN_RING(chan, 1, 0x0300, 2);
+ BEGIN_RING(chan, sub, 0x0300, 2);
OUT_RING(chan, 0);
OUT_RING(chan, (info->var.yres_virtual << 16) | info->var.xres_virtual);
diff --git a/drivers/gpu/drm/nouveau/nv04_fifo.c b/drivers/gpu/drm/nouveau/nv04_fifo.c
index 0c3cd53..f31347b 100644
--- a/drivers/gpu/drm/nouveau/nv04_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv04_fifo.c
@@ -71,6 +71,40 @@
return (reassign == 1);
}
+bool
+nv04_fifo_cache_flush(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+ uint64_t start = ptimer->read(dev);
+
+ do {
+ if (nv_rd32(dev, NV03_PFIFO_CACHE1_GET) ==
+ nv_rd32(dev, NV03_PFIFO_CACHE1_PUT))
+ return true;
+
+ } while (ptimer->read(dev) - start < 100000000);
+
+ NV_ERROR(dev, "Timeout flushing the PFIFO cache.\n");
+
+ return false;
+}
+
+bool
+nv04_fifo_cache_pull(struct drm_device *dev, bool enable)
+{
+ uint32_t pull = nv_rd32(dev, NV04_PFIFO_CACHE1_PULL0);
+
+ if (enable) {
+ nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull | 1);
+ } else {
+ nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, pull & ~1);
+ nv_wr32(dev, NV04_PFIFO_CACHE1_HASH, 0);
+ }
+
+ return !!(pull & 1);
+}
+
int
nv04_fifo_channel_id(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c
index d561d77..e260986 100644
--- a/drivers/gpu/drm/nouveau/nv04_graph.c
+++ b/drivers/gpu/drm/nouveau/nv04_graph.c
@@ -28,6 +28,10 @@
#include "nouveau_drv.h"
static uint32_t nv04_graph_ctx_regs[] = {
+ 0x0040053c,
+ 0x00400544,
+ 0x00400540,
+ 0x00400548,
NV04_PGRAPH_CTX_SWITCH1,
NV04_PGRAPH_CTX_SWITCH2,
NV04_PGRAPH_CTX_SWITCH3,
@@ -102,69 +106,69 @@
NV04_PGRAPH_PATT_COLOR0,
NV04_PGRAPH_PATT_COLOR1,
NV04_PGRAPH_PATT_COLORRAM+0x00,
- NV04_PGRAPH_PATT_COLORRAM+0x01,
- NV04_PGRAPH_PATT_COLORRAM+0x02,
- NV04_PGRAPH_PATT_COLORRAM+0x03,
NV04_PGRAPH_PATT_COLORRAM+0x04,
- NV04_PGRAPH_PATT_COLORRAM+0x05,
- NV04_PGRAPH_PATT_COLORRAM+0x06,
- NV04_PGRAPH_PATT_COLORRAM+0x07,
NV04_PGRAPH_PATT_COLORRAM+0x08,
- NV04_PGRAPH_PATT_COLORRAM+0x09,
- NV04_PGRAPH_PATT_COLORRAM+0x0A,
- NV04_PGRAPH_PATT_COLORRAM+0x0B,
- NV04_PGRAPH_PATT_COLORRAM+0x0C,
- NV04_PGRAPH_PATT_COLORRAM+0x0D,
- NV04_PGRAPH_PATT_COLORRAM+0x0E,
- NV04_PGRAPH_PATT_COLORRAM+0x0F,
+ NV04_PGRAPH_PATT_COLORRAM+0x0c,
NV04_PGRAPH_PATT_COLORRAM+0x10,
- NV04_PGRAPH_PATT_COLORRAM+0x11,
- NV04_PGRAPH_PATT_COLORRAM+0x12,
- NV04_PGRAPH_PATT_COLORRAM+0x13,
NV04_PGRAPH_PATT_COLORRAM+0x14,
- NV04_PGRAPH_PATT_COLORRAM+0x15,
- NV04_PGRAPH_PATT_COLORRAM+0x16,
- NV04_PGRAPH_PATT_COLORRAM+0x17,
NV04_PGRAPH_PATT_COLORRAM+0x18,
- NV04_PGRAPH_PATT_COLORRAM+0x19,
- NV04_PGRAPH_PATT_COLORRAM+0x1A,
- NV04_PGRAPH_PATT_COLORRAM+0x1B,
- NV04_PGRAPH_PATT_COLORRAM+0x1C,
- NV04_PGRAPH_PATT_COLORRAM+0x1D,
- NV04_PGRAPH_PATT_COLORRAM+0x1E,
- NV04_PGRAPH_PATT_COLORRAM+0x1F,
+ NV04_PGRAPH_PATT_COLORRAM+0x1c,
NV04_PGRAPH_PATT_COLORRAM+0x20,
- NV04_PGRAPH_PATT_COLORRAM+0x21,
- NV04_PGRAPH_PATT_COLORRAM+0x22,
- NV04_PGRAPH_PATT_COLORRAM+0x23,
NV04_PGRAPH_PATT_COLORRAM+0x24,
- NV04_PGRAPH_PATT_COLORRAM+0x25,
- NV04_PGRAPH_PATT_COLORRAM+0x26,
- NV04_PGRAPH_PATT_COLORRAM+0x27,
NV04_PGRAPH_PATT_COLORRAM+0x28,
- NV04_PGRAPH_PATT_COLORRAM+0x29,
- NV04_PGRAPH_PATT_COLORRAM+0x2A,
- NV04_PGRAPH_PATT_COLORRAM+0x2B,
- NV04_PGRAPH_PATT_COLORRAM+0x2C,
- NV04_PGRAPH_PATT_COLORRAM+0x2D,
- NV04_PGRAPH_PATT_COLORRAM+0x2E,
- NV04_PGRAPH_PATT_COLORRAM+0x2F,
+ NV04_PGRAPH_PATT_COLORRAM+0x2c,
NV04_PGRAPH_PATT_COLORRAM+0x30,
- NV04_PGRAPH_PATT_COLORRAM+0x31,
- NV04_PGRAPH_PATT_COLORRAM+0x32,
- NV04_PGRAPH_PATT_COLORRAM+0x33,
NV04_PGRAPH_PATT_COLORRAM+0x34,
- NV04_PGRAPH_PATT_COLORRAM+0x35,
- NV04_PGRAPH_PATT_COLORRAM+0x36,
- NV04_PGRAPH_PATT_COLORRAM+0x37,
NV04_PGRAPH_PATT_COLORRAM+0x38,
- NV04_PGRAPH_PATT_COLORRAM+0x39,
- NV04_PGRAPH_PATT_COLORRAM+0x3A,
- NV04_PGRAPH_PATT_COLORRAM+0x3B,
- NV04_PGRAPH_PATT_COLORRAM+0x3C,
- NV04_PGRAPH_PATT_COLORRAM+0x3D,
- NV04_PGRAPH_PATT_COLORRAM+0x3E,
- NV04_PGRAPH_PATT_COLORRAM+0x3F,
+ NV04_PGRAPH_PATT_COLORRAM+0x3c,
+ NV04_PGRAPH_PATT_COLORRAM+0x40,
+ NV04_PGRAPH_PATT_COLORRAM+0x44,
+ NV04_PGRAPH_PATT_COLORRAM+0x48,
+ NV04_PGRAPH_PATT_COLORRAM+0x4c,
+ NV04_PGRAPH_PATT_COLORRAM+0x50,
+ NV04_PGRAPH_PATT_COLORRAM+0x54,
+ NV04_PGRAPH_PATT_COLORRAM+0x58,
+ NV04_PGRAPH_PATT_COLORRAM+0x5c,
+ NV04_PGRAPH_PATT_COLORRAM+0x60,
+ NV04_PGRAPH_PATT_COLORRAM+0x64,
+ NV04_PGRAPH_PATT_COLORRAM+0x68,
+ NV04_PGRAPH_PATT_COLORRAM+0x6c,
+ NV04_PGRAPH_PATT_COLORRAM+0x70,
+ NV04_PGRAPH_PATT_COLORRAM+0x74,
+ NV04_PGRAPH_PATT_COLORRAM+0x78,
+ NV04_PGRAPH_PATT_COLORRAM+0x7c,
+ NV04_PGRAPH_PATT_COLORRAM+0x80,
+ NV04_PGRAPH_PATT_COLORRAM+0x84,
+ NV04_PGRAPH_PATT_COLORRAM+0x88,
+ NV04_PGRAPH_PATT_COLORRAM+0x8c,
+ NV04_PGRAPH_PATT_COLORRAM+0x90,
+ NV04_PGRAPH_PATT_COLORRAM+0x94,
+ NV04_PGRAPH_PATT_COLORRAM+0x98,
+ NV04_PGRAPH_PATT_COLORRAM+0x9c,
+ NV04_PGRAPH_PATT_COLORRAM+0xa0,
+ NV04_PGRAPH_PATT_COLORRAM+0xa4,
+ NV04_PGRAPH_PATT_COLORRAM+0xa8,
+ NV04_PGRAPH_PATT_COLORRAM+0xac,
+ NV04_PGRAPH_PATT_COLORRAM+0xb0,
+ NV04_PGRAPH_PATT_COLORRAM+0xb4,
+ NV04_PGRAPH_PATT_COLORRAM+0xb8,
+ NV04_PGRAPH_PATT_COLORRAM+0xbc,
+ NV04_PGRAPH_PATT_COLORRAM+0xc0,
+ NV04_PGRAPH_PATT_COLORRAM+0xc4,
+ NV04_PGRAPH_PATT_COLORRAM+0xc8,
+ NV04_PGRAPH_PATT_COLORRAM+0xcc,
+ NV04_PGRAPH_PATT_COLORRAM+0xd0,
+ NV04_PGRAPH_PATT_COLORRAM+0xd4,
+ NV04_PGRAPH_PATT_COLORRAM+0xd8,
+ NV04_PGRAPH_PATT_COLORRAM+0xdc,
+ NV04_PGRAPH_PATT_COLORRAM+0xe0,
+ NV04_PGRAPH_PATT_COLORRAM+0xe4,
+ NV04_PGRAPH_PATT_COLORRAM+0xe8,
+ NV04_PGRAPH_PATT_COLORRAM+0xec,
+ NV04_PGRAPH_PATT_COLORRAM+0xf0,
+ NV04_PGRAPH_PATT_COLORRAM+0xf4,
+ NV04_PGRAPH_PATT_COLORRAM+0xf8,
+ NV04_PGRAPH_PATT_COLORRAM+0xfc,
NV04_PGRAPH_PATTERN,
0x0040080c,
NV04_PGRAPH_PATTERN_SHAPE,
@@ -247,14 +251,6 @@
0x004004f8,
0x0040047c,
0x004004fc,
- 0x0040053c,
- 0x00400544,
- 0x00400540,
- 0x00400548,
- 0x00400560,
- 0x00400568,
- 0x00400564,
- 0x0040056c,
0x00400534,
0x00400538,
0x00400514,
@@ -341,9 +337,8 @@
0x00400500,
0x00400504,
NV04_PGRAPH_VALID1,
- NV04_PGRAPH_VALID2
-
-
+ NV04_PGRAPH_VALID2,
+ NV04_PGRAPH_DEBUG_3
};
struct graph_state {
@@ -388,6 +383,18 @@
pgraph->fifo_access(dev, true);
}
+static uint32_t *ctx_reg(struct graph_state *ctx, uint32_t reg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(nv04_graph_ctx_regs); i++) {
+ if (nv04_graph_ctx_regs[i] == reg)
+ return &ctx->nv04[i];
+ }
+
+ return NULL;
+}
+
int nv04_graph_create_context(struct nouveau_channel *chan)
{
struct graph_state *pgraph_ctx;
@@ -398,15 +405,8 @@
if (pgraph_ctx == NULL)
return -ENOMEM;
- /* dev_priv->fifos[channel].pgraph_ctx_user = channel << 24; */
- pgraph_ctx->nv04[0] = 0x0001ffff;
- /* is it really needed ??? */
-#if 0
- dev_priv->fifos[channel].pgraph_ctx[1] =
- nv_rd32(dev, NV_PGRAPH_DEBUG_4);
- dev_priv->fifos[channel].pgraph_ctx[2] =
- nv_rd32(dev, 0x004006b0);
-#endif
+ *ctx_reg(pgraph_ctx, NV04_PGRAPH_DEBUG_3) = 0xfad4ff31;
+
return 0;
}
@@ -429,9 +429,13 @@
nv_wr32(dev, nv04_graph_ctx_regs[i], pgraph_ctx->nv04[i]);
nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL, 0x10010100);
- nv_wr32(dev, NV04_PGRAPH_CTX_USER, chan->id << 24);
+
+ tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff;
+ nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp | chan->id << 24);
+
tmp = nv_rd32(dev, NV04_PGRAPH_FFINTFC_ST2);
nv_wr32(dev, NV04_PGRAPH_FFINTFC_ST2, tmp & 0x000fffff);
+
return 0;
}
@@ -494,7 +498,7 @@
nv_wr32(dev, NV04_PGRAPH_STATE , 0xFFFFFFFF);
nv_wr32(dev, NV04_PGRAPH_CTX_CONTROL , 0x10000100);
tmp = nv_rd32(dev, NV04_PGRAPH_CTX_USER) & 0x00ffffff;
- tmp |= dev_priv->engine.fifo.channels << 24;
+ tmp |= (dev_priv->engine.fifo.channels - 1) << 24;
nv_wr32(dev, NV04_PGRAPH_CTX_USER, tmp);
/* These don't belong here, they're part of a per-channel context */
@@ -533,7 +537,7 @@
int mthd, uint32_t data)
{
struct drm_device *dev = chan->dev;
- uint32_t instance = nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff;
+ uint32_t instance = (nv_rd32(dev, NV04_PGRAPH_CTX_SWITCH4) & 0xffff) << 4;
int subc = (nv_rd32(dev, NV04_PGRAPH_TRAPPED_ADDR) >> 13) & 0x7;
uint32_t tmp;
@@ -547,7 +551,7 @@
return 0;
}
-static struct nouveau_pgraph_object_method nv04_graph_mthds_m2mf[] = {
+static struct nouveau_pgraph_object_method nv04_graph_mthds_sw[] = {
{ 0x0150, nv04_graph_mthd_set_ref },
{}
};
@@ -558,7 +562,7 @@
};
struct nouveau_pgraph_object_class nv04_graph_grclass[] = {
- { 0x0039, false, nv04_graph_mthds_m2mf },
+ { 0x0039, false, NULL },
{ 0x004a, false, nv04_graph_mthds_set_operation }, /* gdirect */
{ 0x005f, false, nv04_graph_mthds_set_operation }, /* imageblit */
{ 0x0061, false, nv04_graph_mthds_set_operation }, /* ifc */
@@ -574,6 +578,7 @@
{ 0x0053, false, NULL }, /* surf3d */
{ 0x0054, false, NULL }, /* tex_tri */
{ 0x0055, false, NULL }, /* multitex_tri */
+ { 0x506e, true, nv04_graph_mthds_sw },
{}
};
diff --git a/drivers/gpu/drm/nouveau/nv10_fb.c b/drivers/gpu/drm/nouveau/nv10_fb.c
index 79e2d10..cc5cda4 100644
--- a/drivers/gpu/drm/nouveau/nv10_fb.c
+++ b/drivers/gpu/drm/nouveau/nv10_fb.c
@@ -3,17 +3,37 @@
#include "nouveau_drv.h"
#include "nouveau_drm.h"
+void
+nv10_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch) {
+ if (dev_priv->card_type >= NV_20)
+ addr |= 1;
+ else
+ addr |= 1 << 31;
+ }
+
+ nv_wr32(dev, NV10_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PFB_TILE(i), addr);
+}
+
int
nv10_fb_init(struct drm_device *dev)
{
- uint32_t fb_bar_size;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
int i;
- fb_bar_size = drm_get_resource_len(dev, 0) - 1;
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, NV10_PFB_TILE(i), 0);
- nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size);
- }
+ pfb->num_tiles = NV10_PFB_TILE__SIZE;
+
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ pfb->set_region_tiling(dev, i, 0, 0, 0);
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c
index 6870e0e..fcf2cdd 100644
--- a/drivers/gpu/drm/nouveau/nv10_graph.c
+++ b/drivers/gpu/drm/nouveau/nv10_graph.c
@@ -807,6 +807,20 @@
chan->pgraph_ctx = NULL;
}
+void
+nv10_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1 << 31;
+
+ nv_wr32(dev, NV10_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PGRAPH_TILE(i), addr);
+}
+
int nv10_graph_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -838,17 +852,9 @@
} else
nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000);
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, NV10_PGRAPH_TILE(i),
- nv_rd32(dev, NV10_PFB_TILE(i)));
- nv_wr32(dev, NV10_PGRAPH_TLIMIT(i),
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- nv_wr32(dev, NV10_PGRAPH_TSIZE(i),
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- nv_wr32(dev, NV10_PGRAPH_TSTATUS(i),
- nv_rd32(dev, NV10_PFB_TSTATUS(i)));
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv10_graph_set_region_tiling(dev, i, 0, 0, 0);
nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH1, 0x00000000);
nv_wr32(dev, NV10_PGRAPH_CTX_SWITCH2, 0x00000000);
diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c
index 81c0135..58b917c 100644
--- a/drivers/gpu/drm/nouveau/nv17_tv.c
+++ b/drivers/gpu/drm/nouveau/nv17_tv.c
@@ -33,13 +33,103 @@
#include "nouveau_hw.h"
#include "nv17_tv.h"
-enum drm_connector_status nv17_tv_detect(struct drm_encoder *encoder,
- struct drm_connector *connector,
- uint32_t pin_mask)
+static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
{
- struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t testval, regoffset = nv04_dac_output_offset(encoder);
+ uint32_t gpio0, gpio1, fp_htotal, fp_hsync_start, fp_hsync_end,
+ fp_control, test_ctrl, dacclk, ctv_14, ctv_1c, ctv_6c;
+ uint32_t sample = 0;
+ int head;
- tv_enc->pin_mask = pin_mask >> 28 & 0xe;
+#define RGB_TEST_DATA(r, g, b) (r << 0 | g << 10 | b << 20)
+ testval = RGB_TEST_DATA(0x82, 0xeb, 0x82);
+ if (dev_priv->vbios->tvdactestval)
+ testval = dev_priv->vbios->tvdactestval;
+
+ dacclk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset);
+ head = (dacclk & 0x100) >> 8;
+
+ /* Save the previous state. */
+ gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1);
+ gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0);
+ fp_htotal = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL);
+ fp_hsync_start = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START);
+ fp_hsync_end = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END);
+ fp_control = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
+ test_ctrl = NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset);
+ ctv_1c = NVReadRAMDAC(dev, head, 0x680c1c);
+ ctv_14 = NVReadRAMDAC(dev, head, 0x680c14);
+ ctv_6c = NVReadRAMDAC(dev, head, 0x680c6c);
+
+ /* Prepare the DAC for load detection. */
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC1, true);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC0, true);
+
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, 1343);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, 1047);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, 1183);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
+ NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
+ NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12 |
+ NV_PRAMDAC_FP_TG_CONTROL_READ_PROG |
+ NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |
+ NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS);
+
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, 0);
+
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset,
+ (dacclk & ~0xff) | 0x22);
+ msleep(1);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset,
+ (dacclk & ~0xff) | 0x21);
+
+ NVWriteRAMDAC(dev, head, 0x680c1c, 1 << 20);
+ NVWriteRAMDAC(dev, head, 0x680c14, 4 << 16);
+
+ /* Sample pin 0x4 (usually S-video luma). */
+ NVWriteRAMDAC(dev, head, 0x680c6c, testval >> 10 & 0x3ff);
+ msleep(20);
+ sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset)
+ & 0x4 << 28;
+
+ /* Sample the remaining pins. */
+ NVWriteRAMDAC(dev, head, 0x680c6c, testval & 0x3ff);
+ msleep(20);
+ sample |= NVReadRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset)
+ & 0xa << 28;
+
+ /* Restore the previous state. */
+ NVWriteRAMDAC(dev, head, 0x680c1c, ctv_1c);
+ NVWriteRAMDAC(dev, head, 0x680c14, ctv_14);
+ NVWriteRAMDAC(dev, head, 0x680c6c, ctv_6c);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset, dacclk);
+ NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + regoffset, test_ctrl);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL, fp_control);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, fp_hsync_end);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, fp_hsync_start);
+ NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, fp_htotal);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC1, gpio1);
+ nv17_gpio_set(dev, DCB_GPIO_TVDAC0, gpio0);
+
+ return sample;
+}
+
+static enum drm_connector_status
+nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct drm_mode_config *conf = &dev->mode_config;
+ struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder);
+ struct dcb_entry *dcb = tv_enc->base.dcb;
+
+ if (dev_priv->chipset == 0x42 ||
+ dev_priv->chipset == 0x43)
+ tv_enc->pin_mask = nv42_tv_sample_load(encoder) >> 28 & 0xe;
+ else
+ tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe;
switch (tv_enc->pin_mask) {
case 0x2:
@@ -50,7 +140,7 @@
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SVIDEO;
break;
case 0xe:
- if (nouveau_encoder(encoder)->dcb->tvconf.has_component_output)
+ if (dcb->tvconf.has_component_output)
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_Component;
else
tv_enc->subconnector = DRM_MODE_SUBCONNECTOR_SCART;
@@ -61,11 +151,16 @@
}
drm_connector_property_set_value(connector,
- encoder->dev->mode_config.tv_subconnector_property,
- tv_enc->subconnector);
+ conf->tv_subconnector_property,
+ tv_enc->subconnector);
- return tv_enc->subconnector ? connector_status_connected :
- connector_status_disconnected;
+ if (tv_enc->subconnector) {
+ NV_INFO(dev, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
+ return connector_status_connected;
+ } else {
+ return connector_status_disconnected;
+ }
}
static const struct {
@@ -633,7 +728,7 @@
.prepare = nv17_tv_prepare,
.commit = nv17_tv_commit,
.mode_set = nv17_tv_mode_set,
- .detect = nv17_dac_detect,
+ .detect = nv17_tv_detect,
};
static struct drm_encoder_slave_funcs nv17_tv_slave_funcs = {
diff --git a/drivers/gpu/drm/nouveau/nv20_graph.c b/drivers/gpu/drm/nouveau/nv20_graph.c
index 18ba74f..d6fc0a8 100644
--- a/drivers/gpu/drm/nouveau/nv20_graph.c
+++ b/drivers/gpu/drm/nouveau/nv20_graph.c
@@ -514,6 +514,27 @@
nouveau_wait_for_idle(dev);
}
+void
+nv20_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, limit);
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, pitch);
+ nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + 4 * i);
+ nv_wr32(dev, NV10_PGRAPH_RDI_DATA, addr);
+}
+
int
nv20_graph_init(struct drm_device *dev)
{
@@ -572,27 +593,10 @@
nv_wr32(dev, NV10_PGRAPH_RDI_DATA , 0x00000030);
}
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, 0x00400904 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- /* which is NV40_PGRAPH_TLIMIT0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0030 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- nv_wr32(dev, 0x00400908 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- /* which is NV40_PGRAPH_TSIZE0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0050 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- nv_wr32(dev, 0x00400900 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- /* which is NV40_PGRAPH_TILE0(i) ?? */
- nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0010 + i * 4);
- nv_wr32(dev, NV10_PGRAPH_RDI_DATA,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv20_graph_set_region_tiling(dev, i, 0, 0, 0);
+
for (i = 0; i < 8; i++) {
nv_wr32(dev, 0x400980 + i * 4, nv_rd32(dev, 0x100300 + i * 4));
nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0090 + i * 4);
@@ -704,18 +708,9 @@
nv_wr32(dev, 0x4000c0, 0x00000016);
- /* copy tile info from PFB */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- nv_wr32(dev, 0x00400904 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TLIMIT(i)));
- /* which is NV40_PGRAPH_TLIMIT0(i) ?? */
- nv_wr32(dev, 0x00400908 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TSIZE(i)));
- /* which is NV40_PGRAPH_TSIZE0(i) ?? */
- nv_wr32(dev, 0x00400900 + i * 0x10,
- nv_rd32(dev, NV10_PFB_TILE(i)));
- /* which is NV40_PGRAPH_TILE0(i) ?? */
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < NV10_PFB_TILE__SIZE; i++)
+ nv20_graph_set_region_tiling(dev, i, 0, 0, 0);
nv_wr32(dev, NV10_PGRAPH_CTX_CONTROL, 0x10000100);
nv_wr32(dev, NV10_PGRAPH_STATE , 0xFFFFFFFF);
diff --git a/drivers/gpu/drm/nouveau/nv40_fb.c b/drivers/gpu/drm/nouveau/nv40_fb.c
index ca1d271..3cd07d8 100644
--- a/drivers/gpu/drm/nouveau/nv40_fb.c
+++ b/drivers/gpu/drm/nouveau/nv40_fb.c
@@ -3,12 +3,37 @@
#include "nouveau_drv.h"
#include "nouveau_drm.h"
+void
+nv40_fb_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ switch (dev_priv->chipset) {
+ case 0x40:
+ nv_wr32(dev, NV10_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV10_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV10_PFB_TILE(i), addr);
+ break;
+
+ default:
+ nv_wr32(dev, NV40_PFB_TLIMIT(i), limit);
+ nv_wr32(dev, NV40_PFB_TSIZE(i), pitch);
+ nv_wr32(dev, NV40_PFB_TILE(i), addr);
+ break;
+ }
+}
+
int
nv40_fb_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t fb_bar_size, tmp;
- int num_tiles;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ uint32_t tmp;
int i;
/* This is strictly a NV4x register (don't know about NV5x). */
@@ -23,35 +48,23 @@
case 0x45:
tmp = nv_rd32(dev, NV10_PFB_CLOSE_PAGE2);
nv_wr32(dev, NV10_PFB_CLOSE_PAGE2, tmp & ~(1 << 15));
- num_tiles = NV10_PFB_TILE__SIZE;
+ pfb->num_tiles = NV10_PFB_TILE__SIZE;
break;
case 0x46: /* G72 */
case 0x47: /* G70 */
case 0x49: /* G71 */
case 0x4b: /* G73 */
case 0x4c: /* C51 (G7X version) */
- num_tiles = NV40_PFB_TILE__SIZE_1;
+ pfb->num_tiles = NV40_PFB_TILE__SIZE_1;
break;
default:
- num_tiles = NV40_PFB_TILE__SIZE_0;
+ pfb->num_tiles = NV40_PFB_TILE__SIZE_0;
break;
}
- fb_bar_size = drm_get_resource_len(dev, 0) - 1;
- switch (dev_priv->chipset) {
- case 0x40:
- for (i = 0; i < num_tiles; i++) {
- nv_wr32(dev, NV10_PFB_TILE(i), 0);
- nv_wr32(dev, NV10_PFB_TLIMIT(i), fb_bar_size);
- }
- break;
- default:
- for (i = 0; i < num_tiles; i++) {
- nv_wr32(dev, NV40_PFB_TILE(i), 0);
- nv_wr32(dev, NV40_PFB_TLIMIT(i), fb_bar_size);
- }
- break;
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ pfb->set_region_tiling(dev, i, 0, 0, 0);
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 2b332bb..53e8afe 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -181,6 +181,48 @@
return ret;
}
+void
+nv40_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
+ uint32_t size, uint32_t pitch)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t limit = max(1u, addr + size) - 1;
+
+ if (pitch)
+ addr |= 1;
+
+ switch (dev_priv->chipset) {
+ case 0x44:
+ case 0x4a:
+ case 0x4e:
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+ break;
+
+ case 0x46:
+ case 0x47:
+ case 0x49:
+ case 0x4b:
+ nv_wr32(dev, NV47_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV47_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV47_PGRAPH_TILE(i), addr);
+ nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch);
+ nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit);
+ nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr);
+ break;
+
+ default:
+ nv_wr32(dev, NV20_PGRAPH_TSIZE(i), pitch);
+ nv_wr32(dev, NV20_PGRAPH_TLIMIT(i), limit);
+ nv_wr32(dev, NV20_PGRAPH_TILE(i), addr);
+ nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), pitch);
+ nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), limit);
+ nv_wr32(dev, NV40_PGRAPH_TILE1(i), addr);
+ break;
+ }
+}
+
/*
* G70 0x47
* G71 0x49
@@ -195,7 +237,8 @@
{
struct drm_nouveau_private *dev_priv =
(struct drm_nouveau_private *)dev->dev_private;
- uint32_t vramsz, tmp;
+ struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+ uint32_t vramsz;
int i, j;
nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) &
@@ -292,74 +335,9 @@
nv_wr32(dev, 0x400b38, 0x2ffff800);
nv_wr32(dev, 0x400b3c, 0x00006000);
- /* copy tile info from PFB */
- switch (dev_priv->chipset) {
- case 0x40: /* vanilla NV40 */
- for (i = 0; i < NV10_PFB_TILE__SIZE; i++) {
- tmp = nv_rd32(dev, NV10_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV10_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- case 0x44:
- case 0x4a:
- case 0x4e: /* NV44-based cores don't have 0x406900? */
- for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- }
- break;
- case 0x46:
- case 0x47:
- case 0x49:
- case 0x4b: /* G7X-based cores */
- for (i = 0; i < NV40_PFB_TILE__SIZE_1; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV47_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV47_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV47_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV47_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- default: /* everything else */
- for (i = 0; i < NV40_PFB_TILE__SIZE_0; i++) {
- tmp = nv_rd32(dev, NV40_PFB_TILE(i));
- nv_wr32(dev, NV40_PGRAPH_TILE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TILE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TLIMIT(i));
- nv_wr32(dev, NV40_PGRAPH_TLIMIT0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TLIMIT1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSIZE(i));
- nv_wr32(dev, NV40_PGRAPH_TSIZE0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSIZE1(i), tmp);
- tmp = nv_rd32(dev, NV40_PFB_TSTATUS(i));
- nv_wr32(dev, NV40_PGRAPH_TSTATUS0(i), tmp);
- nv_wr32(dev, NV40_PGRAPH_TSTATUS1(i), tmp);
- }
- break;
- }
+ /* Turn all the tiling regions off. */
+ for (i = 0; i < pfb->num_tiles; i++)
+ nv40_graph_set_region_tiling(dev, i, 0, 0, 0);
/* begin RAM config */
vramsz = drm_get_resource_len(dev, 0) - 1;
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index a9263d9..90f0bf5 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -690,9 +690,21 @@
int pxclk)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_connector *nv_connector = NULL;
+ struct drm_encoder *encoder;
struct nvbios *bios = &dev_priv->VBIOS;
uint32_t mc, script = 0, or;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+ if (nv_encoder->dcb != dcbent)
+ continue;
+
+ nv_connector = nouveau_encoder_connector_get(nv_encoder);
+ break;
+ }
+
or = ffs(dcbent->or) - 1;
mc = nv50_display_mode_ctrl(dev, dcbent->type != OUTPUT_ANALOG, or);
switch (dcbent->type) {
@@ -711,6 +723,11 @@
} else
if (bios->fp.strapless_is_24bit & 1)
script |= 0x0200;
+
+ if (nv_connector && nv_connector->edid &&
+ (nv_connector->edid->revision >= 4) &&
+ (nv_connector->edid->input & 0x70) >= 0x20)
+ script |= 0x0200;
}
if (nouveau_uscript_lvds >= 0) {
diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c
index 6bcc6d3..e4f279e 100644
--- a/drivers/gpu/drm/nouveau/nv50_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c
@@ -16,9 +16,7 @@
if (!(info->flags & FBINFO_HWACCEL_DISABLED) &&
RING_SPACE(chan, rect->rop == ROP_COPY ? 7 : 11)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
-
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -31,7 +29,11 @@
OUT_RING(chan, 1);
}
BEGIN_RING(chan, NvSub2D, 0x0588, 1);
- OUT_RING(chan, rect->color);
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+ OUT_RING(chan, ((uint32_t *)info->pseudo_palette)[rect->color]);
+ else
+ OUT_RING(chan, rect->color);
BEGIN_RING(chan, NvSub2D, 0x0600, 4);
OUT_RING(chan, rect->dx);
OUT_RING(chan, rect->dy);
@@ -56,9 +58,7 @@
return;
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 12)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
-
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -101,8 +101,7 @@
}
if (!(info->flags & FBINFO_HWACCEL_DISABLED) && RING_SPACE(chan, 11)) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
}
if (info->flags & FBINFO_HWACCEL_DISABLED) {
@@ -135,9 +134,7 @@
int push = dwords > 2047 ? 2047 : dwords;
if (RING_SPACE(chan, push + 1)) {
- NV_ERROR(dev,
- "GPU lockup - switching to software fbcon\n");
- info->flags |= FBINFO_HWACCEL_DISABLED;
+ nouveau_fbcon_gpu_lockup(info);
cfb_imageblit(info, image);
return;
}
@@ -199,7 +196,7 @@
ret = RING_SPACE(chan, 59);
if (ret) {
- NV_ERROR(dev, "GPU lockup - switching to software fbcon\n");
+ nouveau_fbcon_gpu_lockup(info);
return ret;
}
diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c
index b728228..39caf16 100644
--- a/drivers/gpu/drm/nouveau/nv50_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv50_fifo.c
@@ -384,8 +384,8 @@
nv_wr32(dev, NV40_PFIFO_CACHE1_DATA(ptr),
nv_ro32(dev, cache, (ptr * 2) + 1));
}
- nv_wr32(dev, 0x3210, cnt << 2);
- nv_wr32(dev, 0x3270, 0);
+ nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, cnt << 2);
+ nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
/* guessing that all the 0x34xx regs aren't on NV50 */
if (!IS_G80) {
@@ -398,8 +398,6 @@
dev_priv->engine.instmem.finish_access(dev);
- nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
- nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0);
nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, chan->id | (1<<16));
return 0;
}
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index b5f5fe7..1cc7b93 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -24,6 +24,9 @@
$(obj)/r300_reg_safe.h: $(src)/reg_srcs/r300 $(obj)/mkregtable
$(call if_changed,mkregtable)
+$(obj)/r420_reg_safe.h: $(src)/reg_srcs/r420 $(obj)/mkregtable
+ $(call if_changed,mkregtable)
+
$(obj)/rs600_reg_safe.h: $(src)/reg_srcs/rs600 $(obj)/mkregtable
$(call if_changed,mkregtable)
@@ -35,6 +38,8 @@
$(obj)/r300.o: $(obj)/r300_reg_safe.h
+$(obj)/r420.o: $(obj)/r420_reg_safe.h
+
$(obj)/rs600.o: $(obj)/rs600_reg_safe.h
radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
diff --git a/drivers/gpu/drm/radeon/ObjectID.h b/drivers/gpu/drm/radeon/ObjectID.h
index 6d0183c..c714179 100644
--- a/drivers/gpu/drm/radeon/ObjectID.h
+++ b/drivers/gpu/drm/radeon/ObjectID.h
@@ -1,5 +1,5 @@
/*
-* Copyright 2006-2007 Advanced Micro Devices, Inc.
+* Copyright 2006-2007 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -41,14 +41,14 @@
/****************************************************/
/* Encoder Object ID Definition */
/****************************************************/
-#define ENCODER_OBJECT_ID_NONE 0x00
+#define ENCODER_OBJECT_ID_NONE 0x00
/* Radeon Class Display Hardware */
#define ENCODER_OBJECT_ID_INTERNAL_LVDS 0x01
#define ENCODER_OBJECT_ID_INTERNAL_TMDS1 0x02
#define ENCODER_OBJECT_ID_INTERNAL_TMDS2 0x03
#define ENCODER_OBJECT_ID_INTERNAL_DAC1 0x04
-#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */
+#define ENCODER_OBJECT_ID_INTERNAL_DAC2 0x05 /* TV/CV DAC */
#define ENCODER_OBJECT_ID_INTERNAL_SDVOA 0x06
#define ENCODER_OBJECT_ID_INTERNAL_SDVOB 0x07
@@ -56,11 +56,11 @@
#define ENCODER_OBJECT_ID_SI170B 0x08
#define ENCODER_OBJECT_ID_CH7303 0x09
#define ENCODER_OBJECT_ID_CH7301 0x0A
-#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_INTERNAL_DVO1 0x0B /* This belongs to Radeon Class Display Hardware */
#define ENCODER_OBJECT_ID_EXTERNAL_SDVOA 0x0C
#define ENCODER_OBJECT_ID_EXTERNAL_SDVOB 0x0D
#define ENCODER_OBJECT_ID_TITFP513 0x0E
-#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */
+#define ENCODER_OBJECT_ID_INTERNAL_LVTM1 0x0F /* not used for Radeon */
#define ENCODER_OBJECT_ID_VT1623 0x10
#define ENCODER_OBJECT_ID_HDMI_SI1930 0x11
#define ENCODER_OBJECT_ID_HDMI_INTERNAL 0x12
@@ -68,9 +68,9 @@
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 0x13
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 0x14
#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 0x15
-#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */
-#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */
-#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 0x16 /* Shared with CV/TV and CRT */
+#define ENCODER_OBJECT_ID_SI178 0X17 /* External TMDS (dual link, no HDCP.) */
+#define ENCODER_OBJECT_ID_MVPU_FPGA 0x18 /* MVPU FPGA chip */
#define ENCODER_OBJECT_ID_INTERNAL_DDI 0x19
#define ENCODER_OBJECT_ID_VT1625 0x1A
#define ENCODER_OBJECT_ID_HDMI_SI1932 0x1B
@@ -86,7 +86,7 @@
/****************************************************/
/* Connector Object ID Definition */
/****************************************************/
-#define CONNECTOR_OBJECT_ID_NONE 0x00
+#define CONNECTOR_OBJECT_ID_NONE 0x00
#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I 0x01
#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I 0x02
#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D 0x03
@@ -96,7 +96,7 @@
#define CONNECTOR_OBJECT_ID_SVIDEO 0x07
#define CONNECTOR_OBJECT_ID_YPbPr 0x08
#define CONNECTOR_OBJECT_ID_D_CONNECTOR 0x09
-#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */
+#define CONNECTOR_OBJECT_ID_9PIN_DIN 0x0A /* Supports both CV & TV */
#define CONNECTOR_OBJECT_ID_SCART 0x0B
#define CONNECTOR_OBJECT_ID_HDMI_TYPE_A 0x0C
#define CONNECTOR_OBJECT_ID_HDMI_TYPE_B 0x0D
@@ -106,6 +106,8 @@
#define CONNECTOR_OBJECT_ID_CROSSFIRE 0x11
#define CONNECTOR_OBJECT_ID_HARDCODE_DVI 0x12
#define CONNECTOR_OBJECT_ID_DISPLAYPORT 0x13
+#define CONNECTOR_OBJECT_ID_eDP 0x14
+#define CONNECTOR_OBJECT_ID_MXM 0x15
/* deleted */
@@ -116,6 +118,14 @@
#define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL 0x01
/****************************************************/
+/* Generic Object ID Definition */
+/****************************************************/
+#define GENERIC_OBJECT_ID_NONE 0x00
+#define GENERIC_OBJECT_ID_GLSYNC 0x01
+#define GENERIC_OBJECT_ID_PX2_NON_DRIVABLE 0x02
+#define GENERIC_OBJECT_ID_MXM_OPM 0x03
+
+/****************************************************/
/* Graphics Object ENUM ID Definition */
/****************************************************/
#define GRAPH_OBJECT_ENUM_ID1 0x01
@@ -124,6 +134,7 @@
#define GRAPH_OBJECT_ENUM_ID4 0x04
#define GRAPH_OBJECT_ENUM_ID5 0x05
#define GRAPH_OBJECT_ENUM_ID6 0x06
+#define GRAPH_OBJECT_ENUM_ID7 0x07
/****************************************************/
/* Graphics Object ID Bit definition */
@@ -133,35 +144,35 @@
#define RESERVED1_ID_MASK 0x0800
#define OBJECT_TYPE_MASK 0x7000
#define RESERVED2_ID_MASK 0x8000
-
+
#define OBJECT_ID_SHIFT 0x00
#define ENUM_ID_SHIFT 0x08
#define OBJECT_TYPE_SHIFT 0x0C
+
/****************************************************/
/* Graphics Object family definition */
/****************************************************/
-#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) \
- (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
- GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT)
+#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) (GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
+ GRAPHICS_OBJECT_ID << OBJECT_ID_SHIFT)
/****************************************************/
/* GPU Object ID definition - Shared with BIOS */
/****************************************************/
-#define GPU_ENUM_ID1 (GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
+#define GPU_ENUM_ID1 ( GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
/****************************************************/
/* Encoder Object ID definition - Shared with BIOS */
/****************************************************/
/*
-#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 0x2101
#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 0x2102
#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 0x2103
#define ENCODER_INTERNAL_DAC1_ENUM_ID1 0x2104
#define ENCODER_INTERNAL_DAC2_ENUM_ID1 0x2105
#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 0x2106
#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 0x2107
-#define ENCODER_SIL170B_ENUM_ID1 0x2108
+#define ENCODER_SIL170B_ENUM_ID1 0x2108
#define ENCODER_CH7303_ENUM_ID1 0x2109
#define ENCODER_CH7301_ENUM_ID1 0x210A
#define ENCODER_INTERNAL_DVO1_ENUM_ID1 0x210B
@@ -175,8 +186,8 @@
#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 0x2113
#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 0x2114
#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 0x2115
-#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116
-#define ENCODER_SI178_ENUM_ID1 0x2117
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 0x2116
+#define ENCODER_SI178_ENUM_ID1 0x2117
#define ENCODER_MVPU_FPGA_ENUM_ID1 0x2118
#define ENCODER_INTERNAL_DDI_ENUM_ID1 0x2119
#define ENCODER_VT1625_ENUM_ID1 0x211A
@@ -185,205 +196,169 @@
#define ENCODER_DP_DP501_ENUM_ID1 0x211D
#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 0x211E
*/
-#define ENCODER_INTERNAL_LVDS_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_DAC1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_DAC2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
-#define ENCODER_SIL170B_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
+#define ENCODER_SIL170B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
-#define ENCODER_CH7303_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
+#define ENCODER_CH7303_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
-#define ENCODER_CH7301_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
+#define ENCODER_CH7301_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_DVO1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
-#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
-#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
-#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
-#define ENCODER_TITFP513_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
-#define ENCODER_VT1623_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
+#define ENCODER_TITFP513_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
-#define ENCODER_HDMI_SI1930_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
-#define ENCODER_HDMI_INTERNAL_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
+#define ENCODER_VT1623_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+#define ENCODER_HDMI_SI1930_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) /* Shared with CV/TV and CRT */
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
-#define ENCODER_SI178_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
-#define ENCODER_MVPU_FPGA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_DDI_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
-#define ENCODER_VT1625_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) // Shared with CV/TV and CRT
-#define ENCODER_HDMI_SI1932_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
+#define ENCODER_SI178_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
-#define ENCODER_DP_DP501_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
+#define ENCODER_MVPU_FPGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
-#define ENCODER_DP_AN9801_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_DDI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+#define ENCODER_VT1625_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+#define ENCODER_HDMI_SI1932_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
+#define ENCODER_DP_DP501_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+#define ENCODER_DP_AN9801_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
-#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
-#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
/****************************************************/
/* Connector Object ID definition - Shared with BIOS */
@@ -406,167 +381,253 @@
#define CONNECTOR_7PIN_DIN_ENUM_ID1 0x310F
#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 0x3110
*/
-#define CONNECTOR_LVDS_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+#define CONNECTOR_LVDS_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
-#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+#define CONNECTOR_LVDS_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
-#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+#define CONNECTOR_eDP_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
-#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+#define CONNECTOR_eDP_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_eDP << OBJECT_ID_SHIFT)
-#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
-#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
-#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
-#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
-#define CONNECTOR_VGA_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
-#define CONNECTOR_VGA_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
-#define CONNECTOR_COMPOSITE_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
-#define CONNECTOR_SVIDEO_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
-#define CONNECTOR_YPbPr_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
-#define CONNECTOR_D_CONNECTOR_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+#define CONNECTOR_VGA_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
-#define CONNECTOR_9PIN_DIN_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+#define CONNECTOR_VGA_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
-#define CONNECTOR_SCART_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+#define CONNECTOR_COMPOSITE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
-#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+#define CONNECTOR_COMPOSITE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
-#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+#define CONNECTOR_SVIDEO_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
-#define CONNECTOR_7PIN_DIN_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+#define CONNECTOR_SVIDEO_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
-#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+#define CONNECTOR_YPbPr_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
-#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+#define CONNECTOR_YPbPr_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
-#define CONNECTOR_CROSSFIRE_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+#define CONNECTOR_D_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
-#define CONNECTOR_CROSSFIRE_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+#define CONNECTOR_D_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
-#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+#define CONNECTOR_9PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
-#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+#define CONNECTOR_9PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
-#define CONNECTOR_DISPLAYPORT_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+#define CONNECTOR_SCART_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
-#define CONNECTOR_DISPLAYPORT_ENUM_ID2 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+#define CONNECTOR_SCART_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
-#define CONNECTOR_DISPLAYPORT_ENUM_ID3 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
-#define CONNECTOR_DISPLAYPORT_ENUM_ID4 \
- (GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
- CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_7PIN_DIN_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+#define CONNECTOR_7PIN_DIN_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_MXM_ENUM_ID1 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_A
+
+#define CONNECTOR_MXM_ENUM_ID2 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_B
+
+#define CONNECTOR_MXM_ENUM_ID3 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_C
+
+#define CONNECTOR_MXM_ENUM_ID4 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DP_D
+
+#define CONNECTOR_MXM_ENUM_ID5 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID5 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_TXxx
+
+#define CONNECTOR_MXM_ENUM_ID6 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID6 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_LVDS_UXxx
+
+#define CONNECTOR_MXM_ENUM_ID7 ( GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID7 << ENUM_ID_SHIFT |\
+ CONNECTOR_OBJECT_ID_MXM << OBJECT_ID_SHIFT) //Mapping to MXM_DAC
/****************************************************/
/* Router Object ID definition - Shared with BIOS */
/****************************************************/
-#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 \
- (GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
- GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
- ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
+#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 ( GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
/* deleted */
/****************************************************/
+/* Generic Object ID definition - Shared with BIOS */
+/****************************************************/
+#define GENERICOBJECT_GLSYNC_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_GLSYNC << OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_PX2_NON_DRIVABLE_ID2 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_PX2_NON_DRIVABLE<< OBJECT_ID_SHIFT)
+
+#define GENERICOBJECT_MXM_OPM_ENUM_ID1 (GRAPH_OBJECT_TYPE_GENERIC << OBJECT_TYPE_SHIFT |\
+ GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+ GENERIC_OBJECT_ID_MXM_OPM << OBJECT_ID_SHIFT)
+
+/****************************************************/
/* Object Cap definition - Shared with BIOS */
/****************************************************/
#define GRAPHICS_OBJECT_CAP_I2C 0x00000001L
#define GRAPHICS_OBJECT_CAP_TABLE_ID 0x00000002L
+
#define GRAPHICS_OBJECT_I2CCOMMAND_TABLE_ID 0x01
#define GRAPHICS_OBJECT_HOTPLUGDETECTIONINTERUPT_TABLE_ID 0x02
#define GRAPHICS_OBJECT_ENCODER_OUTPUT_PROTECTION_TABLE_ID 0x03
@@ -575,4 +636,8 @@
#pragma pack()
#endif
-#endif /*GRAPHICTYPE */
+#endif /*GRAPHICTYPE */
+
+
+
+
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 0d63c44..3eb0ca5 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -468,7 +468,8 @@
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *dig_connector;
- if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
radeon_connector = to_radeon_connector(connector);
@@ -582,7 +583,8 @@
u8 train_set[4];
int i;
- if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
if (!radeon_encoder->enc_priv)
diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c
index 0d79577..607241c 100644
--- a/drivers/gpu/drm/radeon/mkregtable.c
+++ b/drivers/gpu/drm/radeon/mkregtable.c
@@ -661,8 +661,10 @@
fseek(file, 0, SEEK_SET);
/* get header */
- if (fgets(buf, 1024, file) == NULL)
+ if (fgets(buf, 1024, file) == NULL) {
+ fclose(file);
return -1;
+ }
/* first line will contain the last register
* and gpu name */
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 7172746..8760d66 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -131,7 +131,8 @@
break;
}
}
- r100_irq_set(rdev);
+ if (rdev->irq.installed)
+ r100_irq_set(rdev);
}
void r100_hpd_fini(struct radeon_device *rdev)
@@ -243,6 +244,11 @@
{
uint32_t tmp = 0;
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WREG32(R_000040_GEN_INT_CNTL, 0);
+ return -EINVAL;
+ }
if (rdev->irq.sw_int) {
tmp |= RADEON_SW_INT_ENABLE;
}
@@ -356,6 +362,11 @@
/* Wait until IDLE & CLEAN */
radeon_ring_write(rdev, PACKET0(0x1720, 0));
radeon_ring_write(rdev, (1 << 16) | (1 << 17));
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r100.hdp_cntl |
+ RADEON_HDP_READ_BUFFER_INVALIDATE);
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r100.hdp_cntl);
/* Emit fence sequence & fire IRQ */
radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
radeon_ring_write(rdev, fence->seq);
@@ -1713,14 +1724,6 @@
r100_hdp_reset(rdev);
}
-void r100_hdp_flush(struct radeon_device *rdev)
-{
- u32 tmp;
- tmp = RREG32(RADEON_HOST_PATH_CNTL);
- tmp |= RADEON_HDP_READ_BUFFER_INVALIDATE;
- WREG32(RADEON_HOST_PATH_CNTL, tmp);
-}
-
void r100_hdp_reset(struct radeon_device *rdev)
{
uint32_t tmp;
@@ -3313,6 +3316,7 @@
}
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
@@ -3371,6 +3375,7 @@
radeon_gem_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_irq_kms_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_bo_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 3f2cc9e..0051d11 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -36,7 +36,15 @@
#include "rv350d.h"
#include "r300_reg_safe.h"
-/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 */
+/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380
+ *
+ * GPU Errata:
+ * - HOST_PATH_CNTL: r300 family seems to dislike write to HOST_PATH_CNTL
+ * using MMIO to flush host path read cache, this lead to HARDLOCKUP.
+ * However, scheduling such write to the ring seems harmless, i suspect
+ * the CP read collide with the flush somehow, or maybe the MC, hard to
+ * tell. (Jerome Glisse)
+ */
/*
* rv370,rv380 PCIE GART
@@ -178,6 +186,11 @@
/* Wait until IDLE & CLEAN */
radeon_ring_write(rdev, PACKET0(0x1720, 0));
radeon_ring_write(rdev, (1 << 17) | (1 << 16) | (1 << 9));
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r300.hdp_cntl |
+ RADEON_HDP_READ_BUFFER_INVALIDATE);
+ radeon_ring_write(rdev, PACKET0(RADEON_HOST_PATH_CNTL, 0));
+ radeon_ring_write(rdev, rdev->config.r300.hdp_cntl);
/* Emit fence sequence & fire IRQ */
radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
radeon_ring_write(rdev, fence->seq);
@@ -1258,6 +1271,7 @@
}
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
@@ -1322,6 +1336,7 @@
rv370_pcie_gart_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_irq_kms_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_bo_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index c05a727..053404e 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -30,7 +30,15 @@
#include "radeon_reg.h"
#include "radeon.h"
#include "atom.h"
+#include "r100d.h"
#include "r420d.h"
+#include "r420_reg_safe.h"
+
+static void r420_set_reg_safe(struct radeon_device *rdev)
+{
+ rdev->config.r300.reg_safe_bm = r420_reg_safe_bm;
+ rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r420_reg_safe_bm);
+}
int r420_mc_init(struct radeon_device *rdev)
{
@@ -165,6 +173,34 @@
WREG32_PLL(R_00000D_SCLK_CNTL, sclk_cntl);
}
+static void r420_cp_errata_init(struct radeon_device *rdev)
+{
+ /* RV410 and R420 can lock up if CP DMA to host memory happens
+ * while the 2D engine is busy.
+ *
+ * The proper workaround is to queue a RESYNC at the beginning
+ * of the CP init, apparently.
+ */
+ radeon_scratch_get(rdev, &rdev->config.r300.resync_scratch);
+ radeon_ring_lock(rdev, 8);
+ radeon_ring_write(rdev, PACKET0(R300_CP_RESYNC_ADDR, 1));
+ radeon_ring_write(rdev, rdev->config.r300.resync_scratch);
+ radeon_ring_write(rdev, 0xDEADBEEF);
+ radeon_ring_unlock_commit(rdev);
+}
+
+static void r420_cp_errata_fini(struct radeon_device *rdev)
+{
+ /* Catch the RESYNC we dispatched all the way back,
+ * at the very beginning of the CP init.
+ */
+ radeon_ring_lock(rdev, 8);
+ radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, R300_RB3D_DC_FINISH);
+ radeon_ring_unlock_commit(rdev);
+ radeon_scratch_free(rdev, rdev->config.r300.resync_scratch);
+}
+
static int r420_startup(struct radeon_device *rdev)
{
int r;
@@ -190,12 +226,14 @@
r420_pipes_init(rdev);
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
return r;
}
+ r420_cp_errata_init(rdev);
r = r100_wb_init(rdev);
if (r) {
dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
@@ -238,6 +276,7 @@
int r420_suspend(struct radeon_device *rdev)
{
+ r420_cp_errata_fini(rdev);
r100_cp_disable(rdev);
r100_wb_disable(rdev);
r100_irq_disable(rdev);
@@ -346,7 +385,7 @@
if (r)
return r;
}
- r300_set_reg_safe(rdev);
+ r420_set_reg_safe(rdev);
rdev->accel_working = true;
r = r420_startup(rdev);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 0f3843b..9a18907 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -186,6 +186,7 @@
}
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index a0ac3c1..f5ff349 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -285,7 +285,8 @@
}
}
}
- r600_irq_set(rdev);
+ if (rdev->irq.installed)
+ r600_irq_set(rdev);
}
void r600_hpd_fini(struct radeon_device *rdev)
@@ -726,6 +727,10 @@
a.full = rfixed_const(100);
rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+
+ if (rdev->flags & RADEON_IS_IGP)
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+
return 0;
}
@@ -1384,11 +1389,6 @@
(void)RREG32(PCIE_PORT_DATA);
}
-void r600_hdp_flush(struct radeon_device *rdev)
-{
- WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
-}
-
/*
* CP & Ring
*/
@@ -1785,6 +1785,8 @@
radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
radeon_ring_write(rdev, ((rdev->fence_drv.scratch_reg - PACKET3_SET_CONFIG_REG_OFFSET) >> 2));
radeon_ring_write(rdev, fence->seq);
+ radeon_ring_write(rdev, PACKET0(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0));
+ radeon_ring_write(rdev, 1);
/* CP_INTERRUPT packet 3 no longer exists, use packet 0 */
radeon_ring_write(rdev, PACKET0(CP_INT_STATUS, 0));
radeon_ring_write(rdev, RB_INT_STAT);
@@ -2089,8 +2091,7 @@
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
- if (rdev->flags & RADEON_IS_AGP)
- radeon_agp_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_bo_fini(rdev);
radeon_atombios_fini(rdev);
kfree(rdev->bios);
@@ -2461,6 +2462,10 @@
u32 mode_int = 0;
u32 hpd1, hpd2, hpd3, hpd4 = 0, hpd5 = 0, hpd6 = 0;
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ return -EINVAL;
+ }
/* don't enable anything if the ih is disabled */
if (!rdev->ih.enabled)
return 0;
@@ -2724,7 +2729,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2744,7 +2749,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2793,7 +2798,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2807,7 +2812,7 @@
DRM_DEBUG("IH: CP EOP\n");
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 9aecafb..8787ea8 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -577,9 +577,9 @@
ring_size = num_loops * dwords_per_loop;
/* set default + shaders */
ring_size += 40; /* shaders + def state */
- ring_size += 5; /* fence emit for VB IB */
+ ring_size += 7; /* fence emit for VB IB */
ring_size += 5; /* done copy */
- ring_size += 5; /* fence emit for done copy */
+ ring_size += 7; /* fence emit for done copy */
r = radeon_ring_lock(rdev, ring_size);
WARN_ON(r);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 53b5560..eb5f99b 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -319,10 +319,12 @@
u64 real_vram_size;
int vram_mtrr;
bool vram_is_ddr;
+ bool igp_sideport_enabled;
};
int radeon_mc_setup(struct radeon_device *rdev);
-
+bool radeon_combios_sideport_present(struct radeon_device *rdev);
+bool radeon_atombios_sideport_present(struct radeon_device *rdev);
/*
* GPU scratch registers structures, functions & helpers
@@ -654,7 +656,6 @@
uint32_t offset, uint32_t obj_size);
int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
void (*bandwidth_update)(struct radeon_device *rdev);
- void (*hdp_flush)(struct radeon_device *rdev);
void (*hpd_init)(struct radeon_device *rdev);
void (*hpd_fini)(struct radeon_device *rdev);
bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -667,11 +668,14 @@
struct r100_asic {
const unsigned *reg_safe_bm;
unsigned reg_safe_bm_size;
+ u32 hdp_cntl;
};
struct r300_asic {
const unsigned *reg_safe_bm;
unsigned reg_safe_bm_size;
+ u32 resync_scratch;
+ u32 hdp_cntl;
};
struct r600_asic {
@@ -1007,7 +1011,6 @@
#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
-#define radeon_hdp_flush(rdev) (rdev)->asic->hdp_flush((rdev))
#define radeon_hpd_init(rdev) (rdev)->asic->hpd_init((rdev))
#define radeon_hpd_fini(rdev) (rdev)->asic->hpd_fini((rdev))
#define radeon_hpd_sense(rdev, hpd) (rdev)->asic->hpd_sense((rdev), (hpd))
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 54bf49a..220f454 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -252,10 +252,8 @@
void radeon_agp_fini(struct radeon_device *rdev)
{
#if __OS_HAS_AGP
- if (rdev->flags & RADEON_IS_AGP) {
- if (rdev->ddev->agp && rdev->ddev->agp->acquired) {
- drm_agp_release(rdev->ddev);
- }
+ if (rdev->ddev->agp && rdev->ddev->agp->acquired) {
+ drm_agp_release(rdev->ddev);
}
#endif
}
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index eb29217..f2fbd2e 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -77,7 +77,6 @@
void r100_bandwidth_update(struct radeon_device *rdev);
void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int r100_ring_test(struct radeon_device *rdev);
-void r100_hdp_flush(struct radeon_device *rdev);
void r100_hpd_init(struct radeon_device *rdev);
void r100_hpd_fini(struct radeon_device *rdev);
bool r100_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -114,7 +113,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
@@ -174,7 +172,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
@@ -218,7 +215,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
@@ -267,7 +263,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &r100_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &r100_hpd_init,
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
@@ -324,7 +319,6 @@
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
.bandwidth_update = &rs600_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
@@ -372,7 +366,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rs690_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
@@ -424,7 +417,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
@@ -467,7 +459,6 @@
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r100_hdp_flush,
.hpd_init = &rs600_hpd_init,
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
@@ -508,7 +499,6 @@
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence);
-void r600_hdp_flush(struct radeon_device *rdev);
void r600_hpd_init(struct radeon_device *rdev);
void r600_hpd_fini(struct radeon_device *rdev);
bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -544,7 +534,6 @@
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r600_hdp_flush,
.hpd_init = &r600_hpd_init,
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
@@ -589,7 +578,6 @@
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
.bandwidth_update = &rv515_bandwidth_update,
- .hdp_flush = &r600_hdp_flush,
.hpd_init = &r600_hpd_init,
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 321044b..fa82ca7 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -114,6 +114,7 @@
i2c.i2c_id = gpio->sucI2cId.ucAccess;
i2c.valid = true;
+ break;
}
}
@@ -345,7 +346,9 @@
DRM_MODE_CONNECTOR_Unknown,
DRM_MODE_CONNECTOR_Unknown,
DRM_MODE_CONNECTOR_Unknown,
- DRM_MODE_CONNECTOR_DisplayPort
+ DRM_MODE_CONNECTOR_DisplayPort,
+ DRM_MODE_CONNECTOR_eDP,
+ DRM_MODE_CONNECTOR_Unknown
};
bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
@@ -935,6 +938,43 @@
return false;
}
+union igp_info {
+ struct _ATOM_INTEGRATED_SYSTEM_INFO info;
+ struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2;
+};
+
+bool radeon_atombios_sideport_present(struct radeon_device *rdev)
+{
+ struct radeon_mode_info *mode_info = &rdev->mode_info;
+ int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+ union igp_info *igp_info;
+ u8 frev, crev;
+ u16 data_offset;
+
+ atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+ &crev, &data_offset);
+
+ igp_info = (union igp_info *)(mode_info->atom_context->bios +
+ data_offset);
+
+ if (igp_info) {
+ switch (crev) {
+ case 1:
+ if (igp_info->info.ucMemoryType & 0xf0)
+ return true;
+ break;
+ case 2:
+ if (igp_info->info_2.ucMemoryType & 0x0f)
+ return true;
+ break;
+ default:
+ DRM_ERROR("Unsupported IGP table: %d %d\n", frev, crev);
+ break;
+ }
+ }
+ return false;
+}
+
bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder,
struct radeon_encoder_int_tmds *tmds)
{
@@ -1026,6 +1066,7 @@
ss->delay = ss_info->asSS_Info[i].ucSS_Delay;
ss->range = ss_info->asSS_Info[i].ucSS_Range;
ss->refdiv = ss_info->asSS_Info[i].ucRecommendedRef_Div;
+ break;
}
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index fd94dbc..579c892 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -595,6 +595,48 @@
return false;
}
+bool radeon_combios_sideport_present(struct radeon_device *rdev)
+{
+ struct drm_device *dev = rdev->ddev;
+ u16 igp_info;
+
+ igp_info = combios_get_table_offset(dev, COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE);
+
+ if (igp_info) {
+ if (RBIOS16(igp_info + 0x4))
+ return true;
+ }
+ return false;
+}
+
+static const uint32_t default_primarydac_adj[CHIP_LAST] = {
+ 0x00000808, /* r100 */
+ 0x00000808, /* rv100 */
+ 0x00000808, /* rs100 */
+ 0x00000808, /* rv200 */
+ 0x00000808, /* rs200 */
+ 0x00000808, /* r200 */
+ 0x00000808, /* rv250 */
+ 0x00000000, /* rs300 */
+ 0x00000808, /* rv280 */
+ 0x00000808, /* r300 */
+ 0x00000808, /* r350 */
+ 0x00000808, /* rv350 */
+ 0x00000808, /* rv380 */
+ 0x00000808, /* r420 */
+ 0x00000808, /* r423 */
+ 0x00000808, /* rv410 */
+ 0x00000000, /* rs400 */
+ 0x00000000, /* rs480 */
+};
+
+static void radeon_legacy_get_primary_dac_info_from_table(struct radeon_device *rdev,
+ struct radeon_encoder_primary_dac *p_dac)
+{
+ p_dac->ps2_pdac_adj = default_primarydac_adj[rdev->family];
+ return;
+}
+
struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct
radeon_encoder
*encoder)
@@ -604,20 +646,20 @@
uint16_t dac_info;
uint8_t rev, bg, dac;
struct radeon_encoder_primary_dac *p_dac = NULL;
+ int found = 0;
+
+ p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac),
+ GFP_KERNEL);
+
+ if (!p_dac)
+ return NULL;
if (rdev->bios == NULL)
- return NULL;
+ goto out;
/* check CRT table */
dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
if (dac_info) {
- p_dac =
- kzalloc(sizeof(struct radeon_encoder_primary_dac),
- GFP_KERNEL);
-
- if (!p_dac)
- return NULL;
-
rev = RBIOS8(dac_info) & 0x3;
if (rev < 2) {
bg = RBIOS8(dac_info + 0x2) & 0xf;
@@ -628,9 +670,13 @@
dac = RBIOS8(dac_info + 0x3) & 0xf;
p_dac->ps2_pdac_adj = (bg << 8) | (dac);
}
-
+ found = 1;
}
+out:
+ if (!found) /* fallback to defaults */
+ radeon_legacy_get_primary_dac_info_from_table(rdev, p_dac);
+
return p_dac;
}
@@ -641,6 +687,9 @@
uint16_t tv_info;
enum radeon_tv_std tv_std = TV_STD_NTSC;
+ if (rdev->bios == NULL)
+ return tv_std;
+
tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (tv_info) {
if (RBIOS8(tv_info + 6) == 'T') {
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 2016156..5526641 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -49,8 +49,10 @@
if (radeon_connector->hpd.hpd != RADEON_HPD_NONE)
radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
- if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
- if (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ if ((radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dp_getsinktype(radeon_connector) == CONNECTOR_OBJECT_ID_eDP)) {
if (radeon_dp_needs_link_train(radeon_connector)) {
if (connector->encoder)
dp_link_train(connector->encoder, connector);
@@ -615,7 +617,7 @@
ret = connector_status_connected;
}
} else {
- if (radeon_connector->dac_load_detect) {
+ if (radeon_connector->dac_load_detect && encoder) {
encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
}
@@ -898,10 +900,18 @@
static int radeon_dvi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
/* XXX check mode bandwidth */
+ /* clocks over 135 MHz have heat issues with DVI on RV100 */
+ if (radeon_connector->use_digital &&
+ (rdev->family == CHIP_RV100) &&
+ (mode->clock > 135000))
+ return MODE_CLOCK_HIGH;
+
if (radeon_connector->use_digital && (mode->clock > 165000)) {
if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) ||
(radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
@@ -967,7 +977,8 @@
}
sink_type = radeon_dp_getsinktype(radeon_connector);
- if (sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
+ if ((sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (sink_type == CONNECTOR_OBJECT_ID_eDP)) {
if (radeon_dp_getdpcd(radeon_connector)) {
radeon_dig_connector->dp_sink_type = sink_type;
ret = connector_status_connected;
@@ -992,7 +1003,8 @@
/* XXX check mode bandwidth */
- if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
+ if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return radeon_dp_mode_valid_helper(radeon_connector, mode);
else
return MODE_OK;
@@ -1145,6 +1157,7 @@
subpixel_order = SubPixelHorizontalRGB;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
+ case DRM_MODE_CONNECTOR_eDP:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
if (!radeon_dig_connector)
goto failed;
@@ -1157,10 +1170,16 @@
goto failed;
if (i2c_bus->valid) {
/* add DP i2c bus */
- radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
+ if (connector_type == DRM_MODE_CONNECTOR_eDP)
+ radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "eDP-auxch");
+ else
+ radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
if (!radeon_dig_connector->dp_i2c_bus)
goto failed;
- radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
+ if (connector_type == DRM_MODE_CONNECTOR_eDP)
+ radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "eDP");
+ else
+ radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
if (!radeon_connector->ddc_bus)
goto failed;
}
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 0b2f9c2..06123ba 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -2145,6 +2145,7 @@
&master_priv->sarea);
if (ret) {
DRM_ERROR("SAREA setup failed\n");
+ kfree(master_priv);
return ret;
}
master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 7c68480..0c51f8e 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -733,16 +733,18 @@
*/
int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
{
- struct radeon_device *rdev = dev->dev_private;
+ struct radeon_device *rdev;
struct drm_crtc *crtc;
int r;
- if (dev == NULL || rdev == NULL) {
+ if (dev == NULL || dev->dev_private == NULL) {
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW) {
return 0;
}
+ rdev = dev->dev_private;
+
/* unpin the front buffers */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb);
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 91d72b7..0ec491e 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -234,7 +234,7 @@
"INTERNAL_UNIPHY2",
};
-static const char *connector_names[13] = {
+static const char *connector_names[15] = {
"Unknown",
"VGA",
"DVI-I",
@@ -248,6 +248,8 @@
"DisplayPort",
"HDMI-A",
"HDMI-B",
+ "TV",
+ "eDP",
};
static const char *hpd_names[7] = {
@@ -329,8 +331,11 @@
ret = radeon_get_atom_connector_info_from_object_table(dev);
else
ret = radeon_get_atom_connector_info_from_supported_devices_table(dev);
- } else
+ } else {
ret = radeon_get_legacy_connector_info_from_bios(dev);
+ if (ret == false)
+ ret = radeon_get_legacy_connector_info_from_table(dev);
+ }
} else {
if (!ASIC_IS_AVIVO(rdev))
ret = radeon_get_legacy_connector_info_from_table(dev);
@@ -349,7 +354,8 @@
{
int ret = 0;
- if (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+ if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
if (dig->dp_i2c_bus)
radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index ccba95f..82eb551 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -596,21 +596,23 @@
return ATOM_ENCODER_MODE_LVDS;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
+ case DRM_MODE_CONNECTOR_eDP:
radeon_dig_connector = radeon_connector->con_priv;
- if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
+ if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return ATOM_ENCODER_MODE_DP;
else if (drm_detect_hdmi_monitor(radeon_connector->edid))
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
break;
- case CONNECTOR_DVI_A:
- case CONNECTOR_VGA:
+ case DRM_MODE_CONNECTOR_DVIA:
+ case DRM_MODE_CONNECTOR_VGA:
return ATOM_ENCODER_MODE_CRT;
break;
- case CONNECTOR_STV:
- case CONNECTOR_CTV:
- case CONNECTOR_DIN:
+ case DRM_MODE_CONNECTOR_Composite:
+ case DRM_MODE_CONNECTOR_SVIDEO:
+ case DRM_MODE_CONNECTOR_9PinDIN:
/* fix me */
return ATOM_ENCODER_MODE_TV;
/*return ATOM_ENCODER_MODE_CV;*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 4cdd8b4..8495d4e 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -140,16 +140,15 @@
bool radeon_fence_signaled(struct radeon_fence *fence)
{
- struct radeon_device *rdev = fence->rdev;
unsigned long irq_flags;
bool signaled = false;
- if (rdev->gpu_lockup) {
+ if (!fence)
return true;
- }
- if (fence == NULL) {
+
+ if (fence->rdev->gpu_lockup)
return true;
- }
+
write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags);
signaled = fence->signaled;
/* if we are shuting down report all fence as signaled */
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index 60df2d7..0e1325e 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -131,7 +131,6 @@
printk(KERN_ERR "Failed to wait for object !\n");
return r;
}
- radeon_hdp_flush(robj->rdev);
}
return 0;
}
@@ -312,7 +311,6 @@
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(gobj);
mutex_unlock(&dev->struct_mutex);
- radeon_hdp_flush(robj->rdev);
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index b79ecc4..2f349a3 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -289,16 +289,16 @@
drm_radeon_irq_emit_t *emit = data;
int result;
- if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
- return -EINVAL;
-
- LOCK_TEST_WITH_RETURN(dev, file_priv);
-
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
+ return -EINVAL;
+
+ LOCK_TEST_WITH_RETURN(dev, file_priv);
+
result = radeon_emit_irq(dev);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 9223296..3cfd60f 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -97,6 +97,7 @@
rdev->irq.sw_int = false;
for (i = 0; i < 2; i++) {
rdev->irq.crtc_vblank_int[i] = false;
+ rdev->irq.hpd[i] = false;
}
radeon_irq_set(rdev);
}
@@ -128,17 +129,22 @@
DRM_INFO("radeon: using MSI.\n");
}
}
- drm_irq_install(rdev->ddev);
rdev->irq.installed = true;
+ r = drm_irq_install(rdev->ddev);
+ if (r) {
+ rdev->irq.installed = false;
+ return r;
+ }
DRM_INFO("radeon: irq initialized.\n");
return 0;
}
void radeon_irq_kms_fini(struct radeon_device *rdev)
{
+ drm_vblank_cleanup(rdev->ddev);
if (rdev->irq.installed) {
- rdev->irq.installed = false;
drm_irq_uninstall(rdev->ddev);
+ rdev->irq.installed = false;
if (rdev->msi_enabled)
pci_disable_msi(rdev->pdev);
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 981508f..38e45e2 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -46,6 +46,7 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
int panel_pwr_delay = 2000;
+ bool is_mac = false;
DRM_DEBUG("\n");
if (radeon_encoder->enc_priv) {
@@ -58,6 +59,15 @@
}
}
+ /* macs (and possibly some x86 oem systems?) wire up LVDS strangely
+ * Taken from radeonfb.
+ */
+ if ((rdev->mode_info.connector_table == CT_IBOOK) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_EXTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_INTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_VGA))
+ is_mac = true;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN);
@@ -74,6 +84,8 @@
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON);
+ if (is_mac)
+ lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN;
lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS);
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
@@ -85,7 +97,14 @@
WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb);
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
- lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ if (is_mac) {
+ lvds_gen_cntl &= ~RADEON_LVDS_BL_MOD_EN;
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_EN);
+ } else {
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ }
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index 3a12bb0..417684d 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -77,7 +77,7 @@
unsigned pix_to_tv;
};
-static const uint16_t hor_timing_NTSC[] = {
+static const uint16_t hor_timing_NTSC[MAX_H_CODE_TIMING_LEN] = {
0x0007,
0x003f,
0x0263,
@@ -98,7 +98,7 @@
0
};
-static const uint16_t vert_timing_NTSC[] = {
+static const uint16_t vert_timing_NTSC[MAX_V_CODE_TIMING_LEN] = {
0x2001,
0x200d,
0x1006,
@@ -115,7 +115,7 @@
0
};
-static const uint16_t hor_timing_PAL[] = {
+static const uint16_t hor_timing_PAL[MAX_H_CODE_TIMING_LEN] = {
0x0007,
0x0058,
0x027c,
@@ -136,7 +136,7 @@
0
};
-static const uint16_t vert_timing_PAL[] = {
+static const uint16_t vert_timing_PAL[MAX_V_CODE_TIMING_LEN] = {
0x2001,
0x200c,
0x1005,
@@ -623,9 +623,9 @@
}
flicker_removal = (tmp + 500) / 1000;
- if (flicker_removal < 3)
- flicker_removal = 3;
- for (i = 0; i < 6; ++i) {
+ if (flicker_removal < 2)
+ flicker_removal = 2;
+ for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
if (flicker_removal == SLOPE_limit[i])
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 402369d..91cb041 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -46,32 +46,6 @@
#define to_radeon_encoder(x) container_of(x, struct radeon_encoder, base)
#define to_radeon_framebuffer(x) container_of(x, struct radeon_framebuffer, base)
-enum radeon_connector_type {
- CONNECTOR_NONE,
- CONNECTOR_VGA,
- CONNECTOR_DVI_I,
- CONNECTOR_DVI_D,
- CONNECTOR_DVI_A,
- CONNECTOR_STV,
- CONNECTOR_CTV,
- CONNECTOR_LVDS,
- CONNECTOR_DIGITAL,
- CONNECTOR_SCART,
- CONNECTOR_HDMI_TYPE_A,
- CONNECTOR_HDMI_TYPE_B,
- CONNECTOR_0XC,
- CONNECTOR_0XD,
- CONNECTOR_DIN,
- CONNECTOR_DISPLAY_PORT,
- CONNECTOR_UNSUPPORTED
-};
-
-enum radeon_dvi_type {
- DVI_AUTO,
- DVI_DIGITAL,
- DVI_ANALOG
-};
-
enum radeon_rmx_type {
RMX_OFF,
RMX_FULL,
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d9ffe1f..4e636de 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -221,8 +221,9 @@
int radeon_bo_evict_vram(struct radeon_device *rdev)
{
if (rdev->flags & RADEON_IS_IGP) {
- /* Useless to evict on IGP chips */
- return 0;
+ if (rdev->mc.igp_sideport_enabled == false)
+ /* Useless to evict on IGP chips */
+ return 0;
}
return ttm_bo_evict_mm(&rdev->mman.bdev, TTM_PL_VRAM);
}
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 3b0c07b..58b5adf 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -215,7 +215,10 @@
rbo = container_of(bo, struct radeon_bo, tbo);
switch (bo->mem.mem_type) {
case TTM_PL_VRAM:
- radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
+ if (rbo->rdev->cp.ready == false)
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_CPU);
+ else
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
break;
case TTM_PL_TT:
default:
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r420 b/drivers/gpu/drm/radeon/reg_srcs/r420
new file mode 100644
index 0000000..989f7a0
--- /dev/null
+++ b/drivers/gpu/drm/radeon/reg_srcs/r420
@@ -0,0 +1,795 @@
+r420 0x4f60
+0x1434 SRC_Y_X
+0x1438 DST_Y_X
+0x143C DST_HEIGHT_WIDTH
+0x146C DP_GUI_MASTER_CNTL
+0x1474 BRUSH_Y_X
+0x1478 DP_BRUSH_BKGD_CLR
+0x147C DP_BRUSH_FRGD_CLR
+0x1480 BRUSH_DATA0
+0x1484 BRUSH_DATA1
+0x1598 DST_WIDTH_HEIGHT
+0x15C0 CLR_CMP_CNTL
+0x15C4 CLR_CMP_CLR_SRC
+0x15C8 CLR_CMP_CLR_DST
+0x15CC CLR_CMP_MSK
+0x15D8 DP_SRC_FRGD_CLR
+0x15DC DP_SRC_BKGD_CLR
+0x1600 DST_LINE_START
+0x1604 DST_LINE_END
+0x1608 DST_LINE_PATCOUNT
+0x16C0 DP_CNTL
+0x16CC DP_WRITE_MSK
+0x16D0 DP_CNTL_XDIR_YDIR_YMAJOR
+0x16E8 DEFAULT_SC_BOTTOM_RIGHT
+0x16EC SC_TOP_LEFT
+0x16F0 SC_BOTTOM_RIGHT
+0x16F4 SRC_SC_BOTTOM_RIGHT
+0x1714 DSTCACHE_CTLSTAT
+0x1720 WAIT_UNTIL
+0x172C RBBM_GUICNTL
+0x1D98 VAP_VPORT_XSCALE
+0x1D9C VAP_VPORT_XOFFSET
+0x1DA0 VAP_VPORT_YSCALE
+0x1DA4 VAP_VPORT_YOFFSET
+0x1DA8 VAP_VPORT_ZSCALE
+0x1DAC VAP_VPORT_ZOFFSET
+0x2080 VAP_CNTL
+0x2090 VAP_OUT_VTX_FMT_0
+0x2094 VAP_OUT_VTX_FMT_1
+0x20B0 VAP_VTE_CNTL
+0x2138 VAP_VF_MIN_VTX_INDX
+0x2140 VAP_CNTL_STATUS
+0x2150 VAP_PROG_STREAM_CNTL_0
+0x2154 VAP_PROG_STREAM_CNTL_1
+0x2158 VAP_PROG_STREAM_CNTL_2
+0x215C VAP_PROG_STREAM_CNTL_3
+0x2160 VAP_PROG_STREAM_CNTL_4
+0x2164 VAP_PROG_STREAM_CNTL_5
+0x2168 VAP_PROG_STREAM_CNTL_6
+0x216C VAP_PROG_STREAM_CNTL_7
+0x2180 VAP_VTX_STATE_CNTL
+0x2184 VAP_VSM_VTX_ASSM
+0x2188 VAP_VTX_STATE_IND_REG_0
+0x218C VAP_VTX_STATE_IND_REG_1
+0x2190 VAP_VTX_STATE_IND_REG_2
+0x2194 VAP_VTX_STATE_IND_REG_3
+0x2198 VAP_VTX_STATE_IND_REG_4
+0x219C VAP_VTX_STATE_IND_REG_5
+0x21A0 VAP_VTX_STATE_IND_REG_6
+0x21A4 VAP_VTX_STATE_IND_REG_7
+0x21A8 VAP_VTX_STATE_IND_REG_8
+0x21AC VAP_VTX_STATE_IND_REG_9
+0x21B0 VAP_VTX_STATE_IND_REG_10
+0x21B4 VAP_VTX_STATE_IND_REG_11
+0x21B8 VAP_VTX_STATE_IND_REG_12
+0x21BC VAP_VTX_STATE_IND_REG_13
+0x21C0 VAP_VTX_STATE_IND_REG_14
+0x21C4 VAP_VTX_STATE_IND_REG_15
+0x21DC VAP_PSC_SGN_NORM_CNTL
+0x21E0 VAP_PROG_STREAM_CNTL_EXT_0
+0x21E4 VAP_PROG_STREAM_CNTL_EXT_1
+0x21E8 VAP_PROG_STREAM_CNTL_EXT_2
+0x21EC VAP_PROG_STREAM_CNTL_EXT_3
+0x21F0 VAP_PROG_STREAM_CNTL_EXT_4
+0x21F4 VAP_PROG_STREAM_CNTL_EXT_5
+0x21F8 VAP_PROG_STREAM_CNTL_EXT_6
+0x21FC VAP_PROG_STREAM_CNTL_EXT_7
+0x2200 VAP_PVS_VECTOR_INDX_REG
+0x2204 VAP_PVS_VECTOR_DATA_REG
+0x2208 VAP_PVS_VECTOR_DATA_REG_128
+0x221C VAP_CLIP_CNTL
+0x2220 VAP_GB_VERT_CLIP_ADJ
+0x2224 VAP_GB_VERT_DISC_ADJ
+0x2228 VAP_GB_HORZ_CLIP_ADJ
+0x222C VAP_GB_HORZ_DISC_ADJ
+0x2230 VAP_PVS_FLOW_CNTL_ADDRS_0
+0x2234 VAP_PVS_FLOW_CNTL_ADDRS_1
+0x2238 VAP_PVS_FLOW_CNTL_ADDRS_2
+0x223C VAP_PVS_FLOW_CNTL_ADDRS_3
+0x2240 VAP_PVS_FLOW_CNTL_ADDRS_4
+0x2244 VAP_PVS_FLOW_CNTL_ADDRS_5
+0x2248 VAP_PVS_FLOW_CNTL_ADDRS_6
+0x224C VAP_PVS_FLOW_CNTL_ADDRS_7
+0x2250 VAP_PVS_FLOW_CNTL_ADDRS_8
+0x2254 VAP_PVS_FLOW_CNTL_ADDRS_9
+0x2258 VAP_PVS_FLOW_CNTL_ADDRS_10
+0x225C VAP_PVS_FLOW_CNTL_ADDRS_11
+0x2260 VAP_PVS_FLOW_CNTL_ADDRS_12
+0x2264 VAP_PVS_FLOW_CNTL_ADDRS_13
+0x2268 VAP_PVS_FLOW_CNTL_ADDRS_14
+0x226C VAP_PVS_FLOW_CNTL_ADDRS_15
+0x2284 VAP_PVS_STATE_FLUSH_REG
+0x2288 VAP_PVS_VTX_TIMEOUT_REG
+0x2290 VAP_PVS_FLOW_CNTL_LOOP_INDEX_0
+0x2294 VAP_PVS_FLOW_CNTL_LOOP_INDEX_1
+0x2298 VAP_PVS_FLOW_CNTL_LOOP_INDEX_2
+0x229C VAP_PVS_FLOW_CNTL_LOOP_INDEX_3
+0x22A0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_4
+0x22A4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_5
+0x22A8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_6
+0x22AC VAP_PVS_FLOW_CNTL_LOOP_INDEX_7
+0x22B0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_8
+0x22B4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_9
+0x22B8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_10
+0x22BC VAP_PVS_FLOW_CNTL_LOOP_INDEX_11
+0x22C0 VAP_PVS_FLOW_CNTL_LOOP_INDEX_12
+0x22C4 VAP_PVS_FLOW_CNTL_LOOP_INDEX_13
+0x22C8 VAP_PVS_FLOW_CNTL_LOOP_INDEX_14
+0x22CC VAP_PVS_FLOW_CNTL_LOOP_INDEX_15
+0x22D0 VAP_PVS_CODE_CNTL_0
+0x22D4 VAP_PVS_CONST_CNTL
+0x22D8 VAP_PVS_CODE_CNTL_1
+0x22DC VAP_PVS_FLOW_CNTL_OPC
+0x342C RB2D_DSTCACHE_CTLSTAT
+0x4000 GB_VAP_RASTER_VTX_FMT_0
+0x4004 GB_VAP_RASTER_VTX_FMT_1
+0x4008 GB_ENABLE
+0x401C GB_SELECT
+0x4020 GB_AA_CONFIG
+0x4024 GB_FIFO_SIZE
+0x4100 TX_INVALTAGS
+0x4200 GA_POINT_S0
+0x4204 GA_POINT_T0
+0x4208 GA_POINT_S1
+0x420C GA_POINT_T1
+0x4214 GA_TRIANGLE_STIPPLE
+0x421C GA_POINT_SIZE
+0x4230 GA_POINT_MINMAX
+0x4234 GA_LINE_CNTL
+0x4238 GA_LINE_STIPPLE_CONFIG
+0x4260 GA_LINE_STIPPLE_VALUE
+0x4264 GA_LINE_S0
+0x4268 GA_LINE_S1
+0x4278 GA_COLOR_CONTROL
+0x427C GA_SOLID_RG
+0x4280 GA_SOLID_BA
+0x4288 GA_POLY_MODE
+0x428C GA_ROUND_MODE
+0x4290 GA_OFFSET
+0x4294 GA_FOG_SCALE
+0x4298 GA_FOG_OFFSET
+0x42A0 SU_TEX_WRAP
+0x42A4 SU_POLY_OFFSET_FRONT_SCALE
+0x42A8 SU_POLY_OFFSET_FRONT_OFFSET
+0x42AC SU_POLY_OFFSET_BACK_SCALE
+0x42B0 SU_POLY_OFFSET_BACK_OFFSET
+0x42B4 SU_POLY_OFFSET_ENABLE
+0x42B8 SU_CULL_MODE
+0x42C0 SU_DEPTH_SCALE
+0x42C4 SU_DEPTH_OFFSET
+0x42C8 SU_REG_DEST
+0x4300 RS_COUNT
+0x4304 RS_INST_COUNT
+0x4310 RS_IP_0
+0x4314 RS_IP_1
+0x4318 RS_IP_2
+0x431C RS_IP_3
+0x4320 RS_IP_4
+0x4324 RS_IP_5
+0x4328 RS_IP_6
+0x432C RS_IP_7
+0x4330 RS_INST_0
+0x4334 RS_INST_1
+0x4338 RS_INST_2
+0x433C RS_INST_3
+0x4340 RS_INST_4
+0x4344 RS_INST_5
+0x4348 RS_INST_6
+0x434C RS_INST_7
+0x4350 RS_INST_8
+0x4354 RS_INST_9
+0x4358 RS_INST_10
+0x435C RS_INST_11
+0x4360 RS_INST_12
+0x4364 RS_INST_13
+0x4368 RS_INST_14
+0x436C RS_INST_15
+0x43A4 SC_HYPERZ_EN
+0x43A8 SC_EDGERULE
+0x43B0 SC_CLIP_0_A
+0x43B4 SC_CLIP_0_B
+0x43B8 SC_CLIP_1_A
+0x43BC SC_CLIP_1_B
+0x43C0 SC_CLIP_2_A
+0x43C4 SC_CLIP_2_B
+0x43C8 SC_CLIP_3_A
+0x43CC SC_CLIP_3_B
+0x43D0 SC_CLIP_RULE
+0x43E0 SC_SCISSOR0
+0x43E8 SC_SCREENDOOR
+0x4440 TX_FILTER1_0
+0x4444 TX_FILTER1_1
+0x4448 TX_FILTER1_2
+0x444C TX_FILTER1_3
+0x4450 TX_FILTER1_4
+0x4454 TX_FILTER1_5
+0x4458 TX_FILTER1_6
+0x445C TX_FILTER1_7
+0x4460 TX_FILTER1_8
+0x4464 TX_FILTER1_9
+0x4468 TX_FILTER1_10
+0x446C TX_FILTER1_11
+0x4470 TX_FILTER1_12
+0x4474 TX_FILTER1_13
+0x4478 TX_FILTER1_14
+0x447C TX_FILTER1_15
+0x4580 TX_CHROMA_KEY_0
+0x4584 TX_CHROMA_KEY_1
+0x4588 TX_CHROMA_KEY_2
+0x458C TX_CHROMA_KEY_3
+0x4590 TX_CHROMA_KEY_4
+0x4594 TX_CHROMA_KEY_5
+0x4598 TX_CHROMA_KEY_6
+0x459C TX_CHROMA_KEY_7
+0x45A0 TX_CHROMA_KEY_8
+0x45A4 TX_CHROMA_KEY_9
+0x45A8 TX_CHROMA_KEY_10
+0x45AC TX_CHROMA_KEY_11
+0x45B0 TX_CHROMA_KEY_12
+0x45B4 TX_CHROMA_KEY_13
+0x45B8 TX_CHROMA_KEY_14
+0x45BC TX_CHROMA_KEY_15
+0x45C0 TX_BORDER_COLOR_0
+0x45C4 TX_BORDER_COLOR_1
+0x45C8 TX_BORDER_COLOR_2
+0x45CC TX_BORDER_COLOR_3
+0x45D0 TX_BORDER_COLOR_4
+0x45D4 TX_BORDER_COLOR_5
+0x45D8 TX_BORDER_COLOR_6
+0x45DC TX_BORDER_COLOR_7
+0x45E0 TX_BORDER_COLOR_8
+0x45E4 TX_BORDER_COLOR_9
+0x45E8 TX_BORDER_COLOR_10
+0x45EC TX_BORDER_COLOR_11
+0x45F0 TX_BORDER_COLOR_12
+0x45F4 TX_BORDER_COLOR_13
+0x45F8 TX_BORDER_COLOR_14
+0x45FC TX_BORDER_COLOR_15
+0x4600 US_CONFIG
+0x4604 US_PIXSIZE
+0x4608 US_CODE_OFFSET
+0x460C US_RESET
+0x4610 US_CODE_ADDR_0
+0x4614 US_CODE_ADDR_1
+0x4618 US_CODE_ADDR_2
+0x461C US_CODE_ADDR_3
+0x4620 US_TEX_INST_0
+0x4624 US_TEX_INST_1
+0x4628 US_TEX_INST_2
+0x462C US_TEX_INST_3
+0x4630 US_TEX_INST_4
+0x4634 US_TEX_INST_5
+0x4638 US_TEX_INST_6
+0x463C US_TEX_INST_7
+0x4640 US_TEX_INST_8
+0x4644 US_TEX_INST_9
+0x4648 US_TEX_INST_10
+0x464C US_TEX_INST_11
+0x4650 US_TEX_INST_12
+0x4654 US_TEX_INST_13
+0x4658 US_TEX_INST_14
+0x465C US_TEX_INST_15
+0x4660 US_TEX_INST_16
+0x4664 US_TEX_INST_17
+0x4668 US_TEX_INST_18
+0x466C US_TEX_INST_19
+0x4670 US_TEX_INST_20
+0x4674 US_TEX_INST_21
+0x4678 US_TEX_INST_22
+0x467C US_TEX_INST_23
+0x4680 US_TEX_INST_24
+0x4684 US_TEX_INST_25
+0x4688 US_TEX_INST_26
+0x468C US_TEX_INST_27
+0x4690 US_TEX_INST_28
+0x4694 US_TEX_INST_29
+0x4698 US_TEX_INST_30
+0x469C US_TEX_INST_31
+0x46A4 US_OUT_FMT_0
+0x46A8 US_OUT_FMT_1
+0x46AC US_OUT_FMT_2
+0x46B0 US_OUT_FMT_3
+0x46B4 US_W_FMT
+0x46B8 US_CODE_BANK
+0x46BC US_CODE_EXT
+0x46C0 US_ALU_RGB_ADDR_0
+0x46C4 US_ALU_RGB_ADDR_1
+0x46C8 US_ALU_RGB_ADDR_2
+0x46CC US_ALU_RGB_ADDR_3
+0x46D0 US_ALU_RGB_ADDR_4
+0x46D4 US_ALU_RGB_ADDR_5
+0x46D8 US_ALU_RGB_ADDR_6
+0x46DC US_ALU_RGB_ADDR_7
+0x46E0 US_ALU_RGB_ADDR_8
+0x46E4 US_ALU_RGB_ADDR_9
+0x46E8 US_ALU_RGB_ADDR_10
+0x46EC US_ALU_RGB_ADDR_11
+0x46F0 US_ALU_RGB_ADDR_12
+0x46F4 US_ALU_RGB_ADDR_13
+0x46F8 US_ALU_RGB_ADDR_14
+0x46FC US_ALU_RGB_ADDR_15
+0x4700 US_ALU_RGB_ADDR_16
+0x4704 US_ALU_RGB_ADDR_17
+0x4708 US_ALU_RGB_ADDR_18
+0x470C US_ALU_RGB_ADDR_19
+0x4710 US_ALU_RGB_ADDR_20
+0x4714 US_ALU_RGB_ADDR_21
+0x4718 US_ALU_RGB_ADDR_22
+0x471C US_ALU_RGB_ADDR_23
+0x4720 US_ALU_RGB_ADDR_24
+0x4724 US_ALU_RGB_ADDR_25
+0x4728 US_ALU_RGB_ADDR_26
+0x472C US_ALU_RGB_ADDR_27
+0x4730 US_ALU_RGB_ADDR_28
+0x4734 US_ALU_RGB_ADDR_29
+0x4738 US_ALU_RGB_ADDR_30
+0x473C US_ALU_RGB_ADDR_31
+0x4740 US_ALU_RGB_ADDR_32
+0x4744 US_ALU_RGB_ADDR_33
+0x4748 US_ALU_RGB_ADDR_34
+0x474C US_ALU_RGB_ADDR_35
+0x4750 US_ALU_RGB_ADDR_36
+0x4754 US_ALU_RGB_ADDR_37
+0x4758 US_ALU_RGB_ADDR_38
+0x475C US_ALU_RGB_ADDR_39
+0x4760 US_ALU_RGB_ADDR_40
+0x4764 US_ALU_RGB_ADDR_41
+0x4768 US_ALU_RGB_ADDR_42
+0x476C US_ALU_RGB_ADDR_43
+0x4770 US_ALU_RGB_ADDR_44
+0x4774 US_ALU_RGB_ADDR_45
+0x4778 US_ALU_RGB_ADDR_46
+0x477C US_ALU_RGB_ADDR_47
+0x4780 US_ALU_RGB_ADDR_48
+0x4784 US_ALU_RGB_ADDR_49
+0x4788 US_ALU_RGB_ADDR_50
+0x478C US_ALU_RGB_ADDR_51
+0x4790 US_ALU_RGB_ADDR_52
+0x4794 US_ALU_RGB_ADDR_53
+0x4798 US_ALU_RGB_ADDR_54
+0x479C US_ALU_RGB_ADDR_55
+0x47A0 US_ALU_RGB_ADDR_56
+0x47A4 US_ALU_RGB_ADDR_57
+0x47A8 US_ALU_RGB_ADDR_58
+0x47AC US_ALU_RGB_ADDR_59
+0x47B0 US_ALU_RGB_ADDR_60
+0x47B4 US_ALU_RGB_ADDR_61
+0x47B8 US_ALU_RGB_ADDR_62
+0x47BC US_ALU_RGB_ADDR_63
+0x47C0 US_ALU_ALPHA_ADDR_0
+0x47C4 US_ALU_ALPHA_ADDR_1
+0x47C8 US_ALU_ALPHA_ADDR_2
+0x47CC US_ALU_ALPHA_ADDR_3
+0x47D0 US_ALU_ALPHA_ADDR_4
+0x47D4 US_ALU_ALPHA_ADDR_5
+0x47D8 US_ALU_ALPHA_ADDR_6
+0x47DC US_ALU_ALPHA_ADDR_7
+0x47E0 US_ALU_ALPHA_ADDR_8
+0x47E4 US_ALU_ALPHA_ADDR_9
+0x47E8 US_ALU_ALPHA_ADDR_10
+0x47EC US_ALU_ALPHA_ADDR_11
+0x47F0 US_ALU_ALPHA_ADDR_12
+0x47F4 US_ALU_ALPHA_ADDR_13
+0x47F8 US_ALU_ALPHA_ADDR_14
+0x47FC US_ALU_ALPHA_ADDR_15
+0x4800 US_ALU_ALPHA_ADDR_16
+0x4804 US_ALU_ALPHA_ADDR_17
+0x4808 US_ALU_ALPHA_ADDR_18
+0x480C US_ALU_ALPHA_ADDR_19
+0x4810 US_ALU_ALPHA_ADDR_20
+0x4814 US_ALU_ALPHA_ADDR_21
+0x4818 US_ALU_ALPHA_ADDR_22
+0x481C US_ALU_ALPHA_ADDR_23
+0x4820 US_ALU_ALPHA_ADDR_24
+0x4824 US_ALU_ALPHA_ADDR_25
+0x4828 US_ALU_ALPHA_ADDR_26
+0x482C US_ALU_ALPHA_ADDR_27
+0x4830 US_ALU_ALPHA_ADDR_28
+0x4834 US_ALU_ALPHA_ADDR_29
+0x4838 US_ALU_ALPHA_ADDR_30
+0x483C US_ALU_ALPHA_ADDR_31
+0x4840 US_ALU_ALPHA_ADDR_32
+0x4844 US_ALU_ALPHA_ADDR_33
+0x4848 US_ALU_ALPHA_ADDR_34
+0x484C US_ALU_ALPHA_ADDR_35
+0x4850 US_ALU_ALPHA_ADDR_36
+0x4854 US_ALU_ALPHA_ADDR_37
+0x4858 US_ALU_ALPHA_ADDR_38
+0x485C US_ALU_ALPHA_ADDR_39
+0x4860 US_ALU_ALPHA_ADDR_40
+0x4864 US_ALU_ALPHA_ADDR_41
+0x4868 US_ALU_ALPHA_ADDR_42
+0x486C US_ALU_ALPHA_ADDR_43
+0x4870 US_ALU_ALPHA_ADDR_44
+0x4874 US_ALU_ALPHA_ADDR_45
+0x4878 US_ALU_ALPHA_ADDR_46
+0x487C US_ALU_ALPHA_ADDR_47
+0x4880 US_ALU_ALPHA_ADDR_48
+0x4884 US_ALU_ALPHA_ADDR_49
+0x4888 US_ALU_ALPHA_ADDR_50
+0x488C US_ALU_ALPHA_ADDR_51
+0x4890 US_ALU_ALPHA_ADDR_52
+0x4894 US_ALU_ALPHA_ADDR_53
+0x4898 US_ALU_ALPHA_ADDR_54
+0x489C US_ALU_ALPHA_ADDR_55
+0x48A0 US_ALU_ALPHA_ADDR_56
+0x48A4 US_ALU_ALPHA_ADDR_57
+0x48A8 US_ALU_ALPHA_ADDR_58
+0x48AC US_ALU_ALPHA_ADDR_59
+0x48B0 US_ALU_ALPHA_ADDR_60
+0x48B4 US_ALU_ALPHA_ADDR_61
+0x48B8 US_ALU_ALPHA_ADDR_62
+0x48BC US_ALU_ALPHA_ADDR_63
+0x48C0 US_ALU_RGB_INST_0
+0x48C4 US_ALU_RGB_INST_1
+0x48C8 US_ALU_RGB_INST_2
+0x48CC US_ALU_RGB_INST_3
+0x48D0 US_ALU_RGB_INST_4
+0x48D4 US_ALU_RGB_INST_5
+0x48D8 US_ALU_RGB_INST_6
+0x48DC US_ALU_RGB_INST_7
+0x48E0 US_ALU_RGB_INST_8
+0x48E4 US_ALU_RGB_INST_9
+0x48E8 US_ALU_RGB_INST_10
+0x48EC US_ALU_RGB_INST_11
+0x48F0 US_ALU_RGB_INST_12
+0x48F4 US_ALU_RGB_INST_13
+0x48F8 US_ALU_RGB_INST_14
+0x48FC US_ALU_RGB_INST_15
+0x4900 US_ALU_RGB_INST_16
+0x4904 US_ALU_RGB_INST_17
+0x4908 US_ALU_RGB_INST_18
+0x490C US_ALU_RGB_INST_19
+0x4910 US_ALU_RGB_INST_20
+0x4914 US_ALU_RGB_INST_21
+0x4918 US_ALU_RGB_INST_22
+0x491C US_ALU_RGB_INST_23
+0x4920 US_ALU_RGB_INST_24
+0x4924 US_ALU_RGB_INST_25
+0x4928 US_ALU_RGB_INST_26
+0x492C US_ALU_RGB_INST_27
+0x4930 US_ALU_RGB_INST_28
+0x4934 US_ALU_RGB_INST_29
+0x4938 US_ALU_RGB_INST_30
+0x493C US_ALU_RGB_INST_31
+0x4940 US_ALU_RGB_INST_32
+0x4944 US_ALU_RGB_INST_33
+0x4948 US_ALU_RGB_INST_34
+0x494C US_ALU_RGB_INST_35
+0x4950 US_ALU_RGB_INST_36
+0x4954 US_ALU_RGB_INST_37
+0x4958 US_ALU_RGB_INST_38
+0x495C US_ALU_RGB_INST_39
+0x4960 US_ALU_RGB_INST_40
+0x4964 US_ALU_RGB_INST_41
+0x4968 US_ALU_RGB_INST_42
+0x496C US_ALU_RGB_INST_43
+0x4970 US_ALU_RGB_INST_44
+0x4974 US_ALU_RGB_INST_45
+0x4978 US_ALU_RGB_INST_46
+0x497C US_ALU_RGB_INST_47
+0x4980 US_ALU_RGB_INST_48
+0x4984 US_ALU_RGB_INST_49
+0x4988 US_ALU_RGB_INST_50
+0x498C US_ALU_RGB_INST_51
+0x4990 US_ALU_RGB_INST_52
+0x4994 US_ALU_RGB_INST_53
+0x4998 US_ALU_RGB_INST_54
+0x499C US_ALU_RGB_INST_55
+0x49A0 US_ALU_RGB_INST_56
+0x49A4 US_ALU_RGB_INST_57
+0x49A8 US_ALU_RGB_INST_58
+0x49AC US_ALU_RGB_INST_59
+0x49B0 US_ALU_RGB_INST_60
+0x49B4 US_ALU_RGB_INST_61
+0x49B8 US_ALU_RGB_INST_62
+0x49BC US_ALU_RGB_INST_63
+0x49C0 US_ALU_ALPHA_INST_0
+0x49C4 US_ALU_ALPHA_INST_1
+0x49C8 US_ALU_ALPHA_INST_2
+0x49CC US_ALU_ALPHA_INST_3
+0x49D0 US_ALU_ALPHA_INST_4
+0x49D4 US_ALU_ALPHA_INST_5
+0x49D8 US_ALU_ALPHA_INST_6
+0x49DC US_ALU_ALPHA_INST_7
+0x49E0 US_ALU_ALPHA_INST_8
+0x49E4 US_ALU_ALPHA_INST_9
+0x49E8 US_ALU_ALPHA_INST_10
+0x49EC US_ALU_ALPHA_INST_11
+0x49F0 US_ALU_ALPHA_INST_12
+0x49F4 US_ALU_ALPHA_INST_13
+0x49F8 US_ALU_ALPHA_INST_14
+0x49FC US_ALU_ALPHA_INST_15
+0x4A00 US_ALU_ALPHA_INST_16
+0x4A04 US_ALU_ALPHA_INST_17
+0x4A08 US_ALU_ALPHA_INST_18
+0x4A0C US_ALU_ALPHA_INST_19
+0x4A10 US_ALU_ALPHA_INST_20
+0x4A14 US_ALU_ALPHA_INST_21
+0x4A18 US_ALU_ALPHA_INST_22
+0x4A1C US_ALU_ALPHA_INST_23
+0x4A20 US_ALU_ALPHA_INST_24
+0x4A24 US_ALU_ALPHA_INST_25
+0x4A28 US_ALU_ALPHA_INST_26
+0x4A2C US_ALU_ALPHA_INST_27
+0x4A30 US_ALU_ALPHA_INST_28
+0x4A34 US_ALU_ALPHA_INST_29
+0x4A38 US_ALU_ALPHA_INST_30
+0x4A3C US_ALU_ALPHA_INST_31
+0x4A40 US_ALU_ALPHA_INST_32
+0x4A44 US_ALU_ALPHA_INST_33
+0x4A48 US_ALU_ALPHA_INST_34
+0x4A4C US_ALU_ALPHA_INST_35
+0x4A50 US_ALU_ALPHA_INST_36
+0x4A54 US_ALU_ALPHA_INST_37
+0x4A58 US_ALU_ALPHA_INST_38
+0x4A5C US_ALU_ALPHA_INST_39
+0x4A60 US_ALU_ALPHA_INST_40
+0x4A64 US_ALU_ALPHA_INST_41
+0x4A68 US_ALU_ALPHA_INST_42
+0x4A6C US_ALU_ALPHA_INST_43
+0x4A70 US_ALU_ALPHA_INST_44
+0x4A74 US_ALU_ALPHA_INST_45
+0x4A78 US_ALU_ALPHA_INST_46
+0x4A7C US_ALU_ALPHA_INST_47
+0x4A80 US_ALU_ALPHA_INST_48
+0x4A84 US_ALU_ALPHA_INST_49
+0x4A88 US_ALU_ALPHA_INST_50
+0x4A8C US_ALU_ALPHA_INST_51
+0x4A90 US_ALU_ALPHA_INST_52
+0x4A94 US_ALU_ALPHA_INST_53
+0x4A98 US_ALU_ALPHA_INST_54
+0x4A9C US_ALU_ALPHA_INST_55
+0x4AA0 US_ALU_ALPHA_INST_56
+0x4AA4 US_ALU_ALPHA_INST_57
+0x4AA8 US_ALU_ALPHA_INST_58
+0x4AAC US_ALU_ALPHA_INST_59
+0x4AB0 US_ALU_ALPHA_INST_60
+0x4AB4 US_ALU_ALPHA_INST_61
+0x4AB8 US_ALU_ALPHA_INST_62
+0x4ABC US_ALU_ALPHA_INST_63
+0x4AC0 US_ALU_EXT_ADDR_0
+0x4AC4 US_ALU_EXT_ADDR_1
+0x4AC8 US_ALU_EXT_ADDR_2
+0x4ACC US_ALU_EXT_ADDR_3
+0x4AD0 US_ALU_EXT_ADDR_4
+0x4AD4 US_ALU_EXT_ADDR_5
+0x4AD8 US_ALU_EXT_ADDR_6
+0x4ADC US_ALU_EXT_ADDR_7
+0x4AE0 US_ALU_EXT_ADDR_8
+0x4AE4 US_ALU_EXT_ADDR_9
+0x4AE8 US_ALU_EXT_ADDR_10
+0x4AEC US_ALU_EXT_ADDR_11
+0x4AF0 US_ALU_EXT_ADDR_12
+0x4AF4 US_ALU_EXT_ADDR_13
+0x4AF8 US_ALU_EXT_ADDR_14
+0x4AFC US_ALU_EXT_ADDR_15
+0x4B00 US_ALU_EXT_ADDR_16
+0x4B04 US_ALU_EXT_ADDR_17
+0x4B08 US_ALU_EXT_ADDR_18
+0x4B0C US_ALU_EXT_ADDR_19
+0x4B10 US_ALU_EXT_ADDR_20
+0x4B14 US_ALU_EXT_ADDR_21
+0x4B18 US_ALU_EXT_ADDR_22
+0x4B1C US_ALU_EXT_ADDR_23
+0x4B20 US_ALU_EXT_ADDR_24
+0x4B24 US_ALU_EXT_ADDR_25
+0x4B28 US_ALU_EXT_ADDR_26
+0x4B2C US_ALU_EXT_ADDR_27
+0x4B30 US_ALU_EXT_ADDR_28
+0x4B34 US_ALU_EXT_ADDR_29
+0x4B38 US_ALU_EXT_ADDR_30
+0x4B3C US_ALU_EXT_ADDR_31
+0x4B40 US_ALU_EXT_ADDR_32
+0x4B44 US_ALU_EXT_ADDR_33
+0x4B48 US_ALU_EXT_ADDR_34
+0x4B4C US_ALU_EXT_ADDR_35
+0x4B50 US_ALU_EXT_ADDR_36
+0x4B54 US_ALU_EXT_ADDR_37
+0x4B58 US_ALU_EXT_ADDR_38
+0x4B5C US_ALU_EXT_ADDR_39
+0x4B60 US_ALU_EXT_ADDR_40
+0x4B64 US_ALU_EXT_ADDR_41
+0x4B68 US_ALU_EXT_ADDR_42
+0x4B6C US_ALU_EXT_ADDR_43
+0x4B70 US_ALU_EXT_ADDR_44
+0x4B74 US_ALU_EXT_ADDR_45
+0x4B78 US_ALU_EXT_ADDR_46
+0x4B7C US_ALU_EXT_ADDR_47
+0x4B80 US_ALU_EXT_ADDR_48
+0x4B84 US_ALU_EXT_ADDR_49
+0x4B88 US_ALU_EXT_ADDR_50
+0x4B8C US_ALU_EXT_ADDR_51
+0x4B90 US_ALU_EXT_ADDR_52
+0x4B94 US_ALU_EXT_ADDR_53
+0x4B98 US_ALU_EXT_ADDR_54
+0x4B9C US_ALU_EXT_ADDR_55
+0x4BA0 US_ALU_EXT_ADDR_56
+0x4BA4 US_ALU_EXT_ADDR_57
+0x4BA8 US_ALU_EXT_ADDR_58
+0x4BAC US_ALU_EXT_ADDR_59
+0x4BB0 US_ALU_EXT_ADDR_60
+0x4BB4 US_ALU_EXT_ADDR_61
+0x4BB8 US_ALU_EXT_ADDR_62
+0x4BBC US_ALU_EXT_ADDR_63
+0x4BC0 FG_FOG_BLEND
+0x4BC4 FG_FOG_FACTOR
+0x4BC8 FG_FOG_COLOR_R
+0x4BCC FG_FOG_COLOR_G
+0x4BD0 FG_FOG_COLOR_B
+0x4BD4 FG_ALPHA_FUNC
+0x4BD8 FG_DEPTH_SRC
+0x4C00 US_ALU_CONST_R_0
+0x4C04 US_ALU_CONST_G_0
+0x4C08 US_ALU_CONST_B_0
+0x4C0C US_ALU_CONST_A_0
+0x4C10 US_ALU_CONST_R_1
+0x4C14 US_ALU_CONST_G_1
+0x4C18 US_ALU_CONST_B_1
+0x4C1C US_ALU_CONST_A_1
+0x4C20 US_ALU_CONST_R_2
+0x4C24 US_ALU_CONST_G_2
+0x4C28 US_ALU_CONST_B_2
+0x4C2C US_ALU_CONST_A_2
+0x4C30 US_ALU_CONST_R_3
+0x4C34 US_ALU_CONST_G_3
+0x4C38 US_ALU_CONST_B_3
+0x4C3C US_ALU_CONST_A_3
+0x4C40 US_ALU_CONST_R_4
+0x4C44 US_ALU_CONST_G_4
+0x4C48 US_ALU_CONST_B_4
+0x4C4C US_ALU_CONST_A_4
+0x4C50 US_ALU_CONST_R_5
+0x4C54 US_ALU_CONST_G_5
+0x4C58 US_ALU_CONST_B_5
+0x4C5C US_ALU_CONST_A_5
+0x4C60 US_ALU_CONST_R_6
+0x4C64 US_ALU_CONST_G_6
+0x4C68 US_ALU_CONST_B_6
+0x4C6C US_ALU_CONST_A_6
+0x4C70 US_ALU_CONST_R_7
+0x4C74 US_ALU_CONST_G_7
+0x4C78 US_ALU_CONST_B_7
+0x4C7C US_ALU_CONST_A_7
+0x4C80 US_ALU_CONST_R_8
+0x4C84 US_ALU_CONST_G_8
+0x4C88 US_ALU_CONST_B_8
+0x4C8C US_ALU_CONST_A_8
+0x4C90 US_ALU_CONST_R_9
+0x4C94 US_ALU_CONST_G_9
+0x4C98 US_ALU_CONST_B_9
+0x4C9C US_ALU_CONST_A_9
+0x4CA0 US_ALU_CONST_R_10
+0x4CA4 US_ALU_CONST_G_10
+0x4CA8 US_ALU_CONST_B_10
+0x4CAC US_ALU_CONST_A_10
+0x4CB0 US_ALU_CONST_R_11
+0x4CB4 US_ALU_CONST_G_11
+0x4CB8 US_ALU_CONST_B_11
+0x4CBC US_ALU_CONST_A_11
+0x4CC0 US_ALU_CONST_R_12
+0x4CC4 US_ALU_CONST_G_12
+0x4CC8 US_ALU_CONST_B_12
+0x4CCC US_ALU_CONST_A_12
+0x4CD0 US_ALU_CONST_R_13
+0x4CD4 US_ALU_CONST_G_13
+0x4CD8 US_ALU_CONST_B_13
+0x4CDC US_ALU_CONST_A_13
+0x4CE0 US_ALU_CONST_R_14
+0x4CE4 US_ALU_CONST_G_14
+0x4CE8 US_ALU_CONST_B_14
+0x4CEC US_ALU_CONST_A_14
+0x4CF0 US_ALU_CONST_R_15
+0x4CF4 US_ALU_CONST_G_15
+0x4CF8 US_ALU_CONST_B_15
+0x4CFC US_ALU_CONST_A_15
+0x4D00 US_ALU_CONST_R_16
+0x4D04 US_ALU_CONST_G_16
+0x4D08 US_ALU_CONST_B_16
+0x4D0C US_ALU_CONST_A_16
+0x4D10 US_ALU_CONST_R_17
+0x4D14 US_ALU_CONST_G_17
+0x4D18 US_ALU_CONST_B_17
+0x4D1C US_ALU_CONST_A_17
+0x4D20 US_ALU_CONST_R_18
+0x4D24 US_ALU_CONST_G_18
+0x4D28 US_ALU_CONST_B_18
+0x4D2C US_ALU_CONST_A_18
+0x4D30 US_ALU_CONST_R_19
+0x4D34 US_ALU_CONST_G_19
+0x4D38 US_ALU_CONST_B_19
+0x4D3C US_ALU_CONST_A_19
+0x4D40 US_ALU_CONST_R_20
+0x4D44 US_ALU_CONST_G_20
+0x4D48 US_ALU_CONST_B_20
+0x4D4C US_ALU_CONST_A_20
+0x4D50 US_ALU_CONST_R_21
+0x4D54 US_ALU_CONST_G_21
+0x4D58 US_ALU_CONST_B_21
+0x4D5C US_ALU_CONST_A_21
+0x4D60 US_ALU_CONST_R_22
+0x4D64 US_ALU_CONST_G_22
+0x4D68 US_ALU_CONST_B_22
+0x4D6C US_ALU_CONST_A_22
+0x4D70 US_ALU_CONST_R_23
+0x4D74 US_ALU_CONST_G_23
+0x4D78 US_ALU_CONST_B_23
+0x4D7C US_ALU_CONST_A_23
+0x4D80 US_ALU_CONST_R_24
+0x4D84 US_ALU_CONST_G_24
+0x4D88 US_ALU_CONST_B_24
+0x4D8C US_ALU_CONST_A_24
+0x4D90 US_ALU_CONST_R_25
+0x4D94 US_ALU_CONST_G_25
+0x4D98 US_ALU_CONST_B_25
+0x4D9C US_ALU_CONST_A_25
+0x4DA0 US_ALU_CONST_R_26
+0x4DA4 US_ALU_CONST_G_26
+0x4DA8 US_ALU_CONST_B_26
+0x4DAC US_ALU_CONST_A_26
+0x4DB0 US_ALU_CONST_R_27
+0x4DB4 US_ALU_CONST_G_27
+0x4DB8 US_ALU_CONST_B_27
+0x4DBC US_ALU_CONST_A_27
+0x4DC0 US_ALU_CONST_R_28
+0x4DC4 US_ALU_CONST_G_28
+0x4DC8 US_ALU_CONST_B_28
+0x4DCC US_ALU_CONST_A_28
+0x4DD0 US_ALU_CONST_R_29
+0x4DD4 US_ALU_CONST_G_29
+0x4DD8 US_ALU_CONST_B_29
+0x4DDC US_ALU_CONST_A_29
+0x4DE0 US_ALU_CONST_R_30
+0x4DE4 US_ALU_CONST_G_30
+0x4DE8 US_ALU_CONST_B_30
+0x4DEC US_ALU_CONST_A_30
+0x4DF0 US_ALU_CONST_R_31
+0x4DF4 US_ALU_CONST_G_31
+0x4DF8 US_ALU_CONST_B_31
+0x4DFC US_ALU_CONST_A_31
+0x4E04 RB3D_BLENDCNTL_R3
+0x4E08 RB3D_ABLENDCNTL_R3
+0x4E0C RB3D_COLOR_CHANNEL_MASK
+0x4E10 RB3D_CONSTANT_COLOR
+0x4E14 RB3D_COLOR_CLEAR_VALUE
+0x4E18 RB3D_ROPCNTL_R3
+0x4E1C RB3D_CLRCMP_FLIPE_R3
+0x4E20 RB3D_CLRCMP_CLR_R3
+0x4E24 RB3D_CLRCMP_MSK_R3
+0x4E48 RB3D_DEBUG_CTL
+0x4E4C RB3D_DSTCACHE_CTLSTAT_R3
+0x4E50 RB3D_DITHER_CTL
+0x4E54 RB3D_CMASK_OFFSET0
+0x4E58 RB3D_CMASK_OFFSET1
+0x4E5C RB3D_CMASK_OFFSET2
+0x4E60 RB3D_CMASK_OFFSET3
+0x4E64 RB3D_CMASK_PITCH0
+0x4E68 RB3D_CMASK_PITCH1
+0x4E6C RB3D_CMASK_PITCH2
+0x4E70 RB3D_CMASK_PITCH3
+0x4E74 RB3D_CMASK_WRINDEX
+0x4E78 RB3D_CMASK_DWORD
+0x4E7C RB3D_CMASK_RDINDEX
+0x4E80 RB3D_AARESOLVE_OFFSET
+0x4E84 RB3D_AARESOLVE_PITCH
+0x4E88 RB3D_AARESOLVE_CTL
+0x4EA0 RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD
+0x4EA4 RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD
+0x4F04 ZB_ZSTENCILCNTL
+0x4F08 ZB_STENCILREFMASK
+0x4F14 ZB_ZTOP
+0x4F18 ZB_ZCACHE_CTLSTAT
+0x4F1C ZB_BW_CNTL
+0x4F28 ZB_DEPTHCLEARVALUE
+0x4F30 ZB_ZMASK_OFFSET
+0x4F34 ZB_ZMASK_PITCH
+0x4F38 ZB_ZMASK_WRINDEX
+0x4F3C ZB_ZMASK_DWORD
+0x4F40 ZB_ZMASK_RDINDEX
+0x4F44 ZB_HIZ_OFFSET
+0x4F48 ZB_HIZ_WRINDEX
+0x4F4C ZB_HIZ_DWORD
+0x4F50 ZB_HIZ_RDINDEX
+0x4F54 ZB_HIZ_PITCH
+0x4F58 ZB_ZPASS_DATA
diff --git a/drivers/gpu/drm/radeon/reg_srcs/rs600 b/drivers/gpu/drm/radeon/reg_srcs/rs600
index 8e3c0b8..6801b86 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/rs600
+++ b/drivers/gpu/drm/radeon/reg_srcs/rs600
@@ -153,7 +153,7 @@
0x42A4 SU_POLY_OFFSET_FRONT_SCALE
0x42A8 SU_POLY_OFFSET_FRONT_OFFSET
0x42AC SU_POLY_OFFSET_BACK_SCALE
-0x42B0 SU_POLY_OFFSET_BACK_OFFSET
+0x42B0 SU_POLY_OFFSET_BACK_OFFSET
0x42B4 SU_POLY_OFFSET_ENABLE
0x42B8 SU_CULL_MODE
0x42C0 SU_DEPTH_SCALE
@@ -291,6 +291,8 @@
0x46AC US_OUT_FMT_2
0x46B0 US_OUT_FMT_3
0x46B4 US_W_FMT
+0x46B8 US_CODE_BANK
+0x46BC US_CODE_EXT
0x46C0 US_ALU_RGB_ADDR_0
0x46C4 US_ALU_RGB_ADDR_1
0x46C8 US_ALU_RGB_ADDR_2
@@ -547,6 +549,70 @@
0x4AB4 US_ALU_ALPHA_INST_61
0x4AB8 US_ALU_ALPHA_INST_62
0x4ABC US_ALU_ALPHA_INST_63
+0x4AC0 US_ALU_EXT_ADDR_0
+0x4AC4 US_ALU_EXT_ADDR_1
+0x4AC8 US_ALU_EXT_ADDR_2
+0x4ACC US_ALU_EXT_ADDR_3
+0x4AD0 US_ALU_EXT_ADDR_4
+0x4AD4 US_ALU_EXT_ADDR_5
+0x4AD8 US_ALU_EXT_ADDR_6
+0x4ADC US_ALU_EXT_ADDR_7
+0x4AE0 US_ALU_EXT_ADDR_8
+0x4AE4 US_ALU_EXT_ADDR_9
+0x4AE8 US_ALU_EXT_ADDR_10
+0x4AEC US_ALU_EXT_ADDR_11
+0x4AF0 US_ALU_EXT_ADDR_12
+0x4AF4 US_ALU_EXT_ADDR_13
+0x4AF8 US_ALU_EXT_ADDR_14
+0x4AFC US_ALU_EXT_ADDR_15
+0x4B00 US_ALU_EXT_ADDR_16
+0x4B04 US_ALU_EXT_ADDR_17
+0x4B08 US_ALU_EXT_ADDR_18
+0x4B0C US_ALU_EXT_ADDR_19
+0x4B10 US_ALU_EXT_ADDR_20
+0x4B14 US_ALU_EXT_ADDR_21
+0x4B18 US_ALU_EXT_ADDR_22
+0x4B1C US_ALU_EXT_ADDR_23
+0x4B20 US_ALU_EXT_ADDR_24
+0x4B24 US_ALU_EXT_ADDR_25
+0x4B28 US_ALU_EXT_ADDR_26
+0x4B2C US_ALU_EXT_ADDR_27
+0x4B30 US_ALU_EXT_ADDR_28
+0x4B34 US_ALU_EXT_ADDR_29
+0x4B38 US_ALU_EXT_ADDR_30
+0x4B3C US_ALU_EXT_ADDR_31
+0x4B40 US_ALU_EXT_ADDR_32
+0x4B44 US_ALU_EXT_ADDR_33
+0x4B48 US_ALU_EXT_ADDR_34
+0x4B4C US_ALU_EXT_ADDR_35
+0x4B50 US_ALU_EXT_ADDR_36
+0x4B54 US_ALU_EXT_ADDR_37
+0x4B58 US_ALU_EXT_ADDR_38
+0x4B5C US_ALU_EXT_ADDR_39
+0x4B60 US_ALU_EXT_ADDR_40
+0x4B64 US_ALU_EXT_ADDR_41
+0x4B68 US_ALU_EXT_ADDR_42
+0x4B6C US_ALU_EXT_ADDR_43
+0x4B70 US_ALU_EXT_ADDR_44
+0x4B74 US_ALU_EXT_ADDR_45
+0x4B78 US_ALU_EXT_ADDR_46
+0x4B7C US_ALU_EXT_ADDR_47
+0x4B80 US_ALU_EXT_ADDR_48
+0x4B84 US_ALU_EXT_ADDR_49
+0x4B88 US_ALU_EXT_ADDR_50
+0x4B8C US_ALU_EXT_ADDR_51
+0x4B90 US_ALU_EXT_ADDR_52
+0x4B94 US_ALU_EXT_ADDR_53
+0x4B98 US_ALU_EXT_ADDR_54
+0x4B9C US_ALU_EXT_ADDR_55
+0x4BA0 US_ALU_EXT_ADDR_56
+0x4BA4 US_ALU_EXT_ADDR_57
+0x4BA8 US_ALU_EXT_ADDR_58
+0x4BAC US_ALU_EXT_ADDR_59
+0x4BB0 US_ALU_EXT_ADDR_60
+0x4BB4 US_ALU_EXT_ADDR_61
+0x4BB8 US_ALU_EXT_ADDR_62
+0x4BBC US_ALU_EXT_ADDR_63
0x4BC0 FG_FOG_BLEND
0x4BC4 FG_FOG_FACTOR
0x4BC8 FG_FOG_COLOR_R
diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515
index 0102a0d..38abf63 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/rv515
+++ b/drivers/gpu/drm/radeon/reg_srcs/rv515
@@ -161,7 +161,12 @@
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
+0x4028 GB_Z_PEQ_CONFIG
0x4100 TX_INVALTAGS
+0x4114 SU_TEX_WRAP_PS3
+0x4118 PS3_ENABLE
+0x411c PS3_VTX_FMT
+0x4120 PS3_TEX_SOURCE
0x4200 GA_POINT_S0
0x4204 GA_POINT_T0
0x4208 GA_POINT_S1
@@ -171,6 +176,7 @@
0x4230 GA_POINT_MINMAX
0x4234 GA_LINE_CNTL
0x4238 GA_LINE_STIPPLE_CONFIG
+0x4258 GA_COLOR_CONTROL_PS3
0x4260 GA_LINE_STIPPLE_VALUE
0x4264 GA_LINE_S0
0x4268 GA_LINE_S1
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 368415d..9f54189 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -356,6 +356,7 @@
rdev->mc.vram_location = G_00015C_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_combios_sideport_present(rdev);
if (r)
return r;
return 0;
@@ -395,6 +396,7 @@
return r;
/* Enable IRQ */
r100_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 4f8ea42..d525575 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -56,6 +56,7 @@
rdev->mc.vram_location = G_000004_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xffffffffUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
if (r)
return r;
return 0;
@@ -134,7 +135,8 @@
break;
}
}
- rs600_irq_set(rdev);
+ if (rdev->irq.installed)
+ rs600_irq_set(rdev);
}
void rs600_hpd_fini(struct radeon_device *rdev)
@@ -315,6 +317,11 @@
u32 hpd2 = RREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL) &
~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
+ if (!rdev->irq.installed) {
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WREG32(R_000040_GEN_INT_CNTL, 0);
+ return -EINVAL;
+ }
if (rdev->irq.sw_int) {
tmp |= S_000040_SW_INT_EN(1);
}
@@ -396,7 +403,7 @@
}
while (status || r500_disp_int) {
/* SW interrupt */
- if (G_000040_SW_INT_EN(status))
+ if (G_000044_SW_INT(status))
radeon_fence_process(rdev);
/* Vertical blank interrupts */
if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int))
@@ -553,6 +560,7 @@
return r;
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 1e22f52..cd31da9 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -172,6 +172,7 @@
rdev->mc.vram_location = G_000100_MC_FB_START(tmp) << 16;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
if (r)
return r;
return 0;
@@ -625,6 +626,7 @@
return r;
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 59632a5..6275671 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -479,6 +479,7 @@
}
/* Enable IRQ */
rs600_irq_set(rdev);
+ rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
r = r100_cp_init(rdev, 1024 * 1024);
if (r) {
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 3bcb66e..59c7124 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1096,8 +1096,7 @@
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
- if (rdev->flags & RADEON_IS_AGP)
- radeon_agp_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_bo_fini(rdev);
radeon_atombios_fini(rdev);
kfree(rdev->bios);
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4b96e7a..5b4d66d 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -431,6 +431,13 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 80792d3..eabe5f8 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1285,6 +1285,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
@@ -1553,6 +1556,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3839340..010368e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -88,6 +88,9 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
@@ -166,6 +169,9 @@
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_ETT 0x0664
+#define USB_DEVICE_ID_TC5UH 0x0309
+
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c
index 5b222ee..510dd13 100644
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -39,7 +39,17 @@
*
* 3. 135 byte report descriptor
* Report #4 has an array field with logical range 0..17 instead of 1..14.
+ *
+ * 4. 171 byte report descriptor
+ * Report #3 has an array field with logical range 0..1 instead of 1..3.
*/
+static inline void samsung_dev_trace(struct hid_device *hdev,
+ unsigned int rsize)
+{
+ dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
+ "descriptor\n", rsize);
+}
+
static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
@@ -47,8 +57,7 @@
rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
rdesc[182] == 0x40) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 184);
+ samsung_dev_trace(hdev, 184);
rdesc[176] = 0xff;
rdesc[178] = 0x08;
rdesc[180] = 0x06;
@@ -56,17 +65,21 @@
} else
if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
rdesc[194] == 0x25 && rdesc[195] == 0x12) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 203);
+ samsung_dev_trace(hdev, 203);
rdesc[193] = 0x1;
rdesc[195] = 0xf;
} else
if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
rdesc[126] == 0x25 && rdesc[127] == 0x11) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 135);
+ samsung_dev_trace(hdev, 135);
rdesc[125] = 0x1;
rdesc[127] = 0xe;
+ } else
+ if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 &&
+ rdesc[162] == 0x25 && rdesc[163] == 0x01) {
+ samsung_dev_trace(hdev, 171);
+ rdesc[161] = 0x1;
+ rdesc[163] = 0x3;
}
}
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 7475421..12dcda5 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -142,6 +142,7 @@
wdata->butstate = rw;
input_report_key(input, BTN_0, rw & 0x02);
input_report_key(input, BTN_1, rw & 0x01);
+ input_report_key(input, BTN_TOOL_FINGER, 0xf0);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
input_sync(input);
}
@@ -196,6 +197,9 @@
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
input->mscbit[0] |= BIT(MSC_SERIAL);
+ set_bit(BTN_0, input->keybit);
+ set_bit(BTN_1, input->keybit);
+ set_bit(BTN_TOOL_FINGER, input->keybit);
/* Distance, rubber and mouse */
input->absbit[0] |= BIT(ABS_DISTANCE);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 46c3c56..68cf877 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -392,7 +392,7 @@
config SENSORS_CORETEMP
tristate "Intel Core/Core2/Atom temperature sensor"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
sensor inside your CPU. Most of the family 6 CPUs
@@ -792,6 +792,16 @@
This driver can also be built as a module. If so, the module
will be called ads7828.
+config SENSORS_AMC6821
+ tristate "Texas Instruments AMC6821"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Texas Instruments
+ AMC6821 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called amc6821.
+
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 450c8e8..4bc215c 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -86,6 +86,7 @@
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index a1a7ef1..a31e77c 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -94,7 +94,7 @@
#define ADT7462_PIN24_SHIFT 6
#define ADT7462_PIN26_VOLT_INPUT 0x08
#define ADT7462_PIN25_VOLT_INPUT 0x20
-#define ADT7462_PIN28_SHIFT 6 /* cfg3 */
+#define ADT7462_PIN28_SHIFT 4 /* cfg3 */
#define ADT7462_PIN28_VOLT 0x5
#define ADT7462_REG_ALARM1 0xB8
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
new file mode 100644
index 0000000..1c89d92
--- /dev/null
+++ b/drivers/hwmon/amc6821.c
@@ -0,0 +1,1116 @@
+/*
+ amc6821.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
+
+ Based on max6650.c:
+ Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+#include <linux/kernel.h> /* Needed for KERN_INFO */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+
+/*
+ * Addresses to scan.
+ */
+
+static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
+ 0x4c, 0x4d, 0x4e, I2C_CLIENT_END};
+
+
+
+/*
+ * Insmod parameters
+ */
+
+static int pwminv = 0; /*Inverted PWM output. */
+module_param(pwminv, int, S_IRUGO);
+
+static int init = 1; /*Power-on initialization.*/
+module_param(init, int, S_IRUGO);
+
+
+enum chips { amc6821 };
+
+#define AMC6821_REG_DEV_ID 0x3D
+#define AMC6821_REG_COMP_ID 0x3E
+#define AMC6821_REG_CONF1 0x00
+#define AMC6821_REG_CONF2 0x01
+#define AMC6821_REG_CONF3 0x3F
+#define AMC6821_REG_CONF4 0x04
+#define AMC6821_REG_STAT1 0x02
+#define AMC6821_REG_STAT2 0x03
+#define AMC6821_REG_TDATA_LOW 0x08
+#define AMC6821_REG_TDATA_HI 0x09
+#define AMC6821_REG_LTEMP_HI 0x0A
+#define AMC6821_REG_RTEMP_HI 0x0B
+#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
+#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
+#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
+#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
+#define AMC6821_REG_LTEMP_CRIT 0x1B
+#define AMC6821_REG_RTEMP_CRIT 0x1D
+#define AMC6821_REG_PSV_TEMP 0x1C
+#define AMC6821_REG_DCY 0x22
+#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
+#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
+#define AMC6821_REG_DCY_LOW_TEMP 0x21
+
+#define AMC6821_REG_TACH_LLIMITL 0x10
+#define AMC6821_REG_TACH_LLIMITH 0x11
+#define AMC6821_REG_TACH_HLIMITL 0x12
+#define AMC6821_REG_TACH_HLIMITH 0x13
+
+#define AMC6821_CONF1_START 0x01
+#define AMC6821_CONF1_FAN_INT_EN 0x02
+#define AMC6821_CONF1_FANIE 0x04
+#define AMC6821_CONF1_PWMINV 0x08
+#define AMC6821_CONF1_FAN_FAULT_EN 0x10
+#define AMC6821_CONF1_FDRC0 0x20
+#define AMC6821_CONF1_FDRC1 0x40
+#define AMC6821_CONF1_THERMOVIE 0x80
+
+#define AMC6821_CONF2_PWM_EN 0x01
+#define AMC6821_CONF2_TACH_MODE 0x02
+#define AMC6821_CONF2_TACH_EN 0x04
+#define AMC6821_CONF2_RTFIE 0x08
+#define AMC6821_CONF2_LTOIE 0x10
+#define AMC6821_CONF2_RTOIE 0x20
+#define AMC6821_CONF2_PSVIE 0x40
+#define AMC6821_CONF2_RST 0x80
+
+#define AMC6821_CONF3_THERM_FAN_EN 0x80
+#define AMC6821_CONF3_REV_MASK 0x0F
+
+#define AMC6821_CONF4_OVREN 0x10
+#define AMC6821_CONF4_TACH_FAST 0x20
+#define AMC6821_CONF4_PSPR 0x40
+#define AMC6821_CONF4_MODE 0x80
+
+#define AMC6821_STAT1_RPM_ALARM 0x01
+#define AMC6821_STAT1_FANS 0x02
+#define AMC6821_STAT1_RTH 0x04
+#define AMC6821_STAT1_RTL 0x08
+#define AMC6821_STAT1_R_THERM 0x10
+#define AMC6821_STAT1_RTF 0x20
+#define AMC6821_STAT1_LTH 0x40
+#define AMC6821_STAT1_LTL 0x80
+
+#define AMC6821_STAT2_RTC 0x08
+#define AMC6821_STAT2_LTC 0x10
+#define AMC6821_STAT2_LPSV 0x20
+#define AMC6821_STAT2_L_THERM 0x40
+#define AMC6821_STAT2_THERM_IN 0x80
+
+enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
+ IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
+ IDX_TEMP2_MAX, IDX_TEMP2_CRIT,
+ TEMP_IDX_LEN, };
+
+static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI,
+ AMC6821_REG_LTEMP_LIMIT_MIN,
+ AMC6821_REG_LTEMP_LIMIT_MAX,
+ AMC6821_REG_LTEMP_CRIT,
+ AMC6821_REG_RTEMP_HI,
+ AMC6821_REG_RTEMP_LIMIT_MIN,
+ AMC6821_REG_RTEMP_LIMIT_MAX,
+ AMC6821_REG_RTEMP_CRIT, };
+
+enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX,
+ FAN1_IDX_LEN, };
+
+static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW,
+ AMC6821_REG_TACH_LLIMITL,
+ AMC6821_REG_TACH_HLIMITL, };
+
+
+static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI,
+ AMC6821_REG_TACH_LLIMITH,
+ AMC6821_REG_TACH_HLIMITH, };
+
+static int amc6821_probe(
+ struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int amc6821_detect(
+ struct i2c_client *client,
+ struct i2c_board_info *info);
+static int amc6821_init_client(struct i2c_client *client);
+static int amc6821_remove(struct i2c_client *client);
+static struct amc6821_data *amc6821_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id amc6821_id[] = {
+ { "amc6821", amc6821 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, amc6821_id);
+
+static struct i2c_driver amc6821_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "amc6821",
+ },
+ .probe = amc6821_probe,
+ .remove = amc6821_remove,
+ .id_table = amc6821_id,
+ .detect = amc6821_detect,
+ .address_list = normal_i2c,
+};
+
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct amc6821_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* register values */
+ int temp[TEMP_IDX_LEN];
+
+ u16 fan[FAN1_IDX_LEN];
+ u8 fan1_div;
+
+ u8 pwm1;
+ u8 temp1_auto_point_temp[3];
+ u8 temp2_auto_point_temp[3];
+ u8 pwm1_auto_point_pwm[3];
+ u8 pwm1_enable;
+ u8 pwm1_auto_channels_temp;
+
+ u8 stat1;
+ u8 stat2;
+};
+
+
+static ssize_t get_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp[ix] * 1000);
+}
+
+
+
+static ssize_t set_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int ix = to_sensor_dev_attr(attr)->index;
+ long val;
+
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = SENSORS_LIMIT(val / 1000, -128, 127);
+
+ mutex_lock(&data->update_lock);
+ data->temp[ix] = val;
+ if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+
+static ssize_t get_temp_alarm(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ u8 flag;
+
+ switch (ix) {
+ case IDX_TEMP1_MIN:
+ flag = data->stat1 & AMC6821_STAT1_LTL;
+ break;
+ case IDX_TEMP1_MAX:
+ flag = data->stat1 & AMC6821_STAT1_LTH;
+ break;
+ case IDX_TEMP1_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_LTC;
+ break;
+ case IDX_TEMP2_MIN:
+ flag = data->stat1 & AMC6821_STAT1_RTL;
+ break;
+ case IDX_TEMP2_MAX:
+ flag = data->stat1 & AMC6821_STAT1_RTH;
+ break;
+ case IDX_TEMP2_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_RTC;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ return -EINVAL;
+ }
+ if (flag)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+
+
+
+static ssize_t get_temp2_fault(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ if (data->stat1 & AMC6821_STAT1_RTF)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+static ssize_t get_pwm1(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1);
+}
+
+static ssize_t set_pwm1(
+ struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ data->pwm1 = SENSORS_LIMIT(val , 0, 255);
+ i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t get_pwm1_enable(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_enable);
+}
+
+static ssize_t set_pwm1_enable(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return -EIO;
+ }
+
+ switch (val) {
+ case 1:
+ config &= ~AMC6821_CONF1_FDRC0;
+ config &= ~AMC6821_CONF1_FDRC1;
+ break;
+ case 2:
+ config &= ~AMC6821_CONF1_FDRC0;
+ config |= AMC6821_CONF1_FDRC1;
+ break;
+ case 3:
+ config |= AMC6821_CONF1_FDRC0;
+ config |= AMC6821_CONF1_FDRC1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ mutex_lock(&data->update_lock);
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ count = -EIO;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t get_pwm1_auto_channels_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp);
+}
+
+
+static ssize_t get_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int ix = to_sensor_dev_attr_2(devattr)->index;
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ struct amc6821_data *data = amc6821_update_device(dev);
+ switch (nr) {
+ case 1:
+ return sprintf(buf, "%d\n",
+ data->temp1_auto_point_temp[ix] * 1000);
+ break;
+ case 2:
+ return sprintf(buf, "%d\n",
+ data->temp2_auto_point_temp[ix] * 1000);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
+}
+
+
+static ssize_t get_pwm1_auto_point_pwm(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int ix = to_sensor_dev_attr(devattr)->index;
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]);
+}
+
+
+static inline ssize_t set_slope_register(struct i2c_client *client,
+ u8 reg,
+ u8 dpwm,
+ u8 *ptemp)
+{
+ int dt;
+ u8 tmp;
+
+ dt = ptemp[2]-ptemp[1];
+ for (tmp = 4; tmp > 0; tmp--) {
+ if (dt * (0x20 >> tmp) >= dpwm)
+ break;
+ }
+ tmp |= (ptemp[1] & 0x7C) << 1;
+ if (i2c_smbus_write_byte_data(client,
+ reg, tmp)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+
+
+static ssize_t set_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ u8 *ptemp;
+ u8 reg;
+ int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (nr) {
+ case 1:
+ ptemp = data->temp1_auto_point_temp;
+ reg = AMC6821_REG_LTEMP_FAN_CTRL;
+ break;
+ case 2:
+ ptemp = data->temp2_auto_point_temp;
+ reg = AMC6821_REG_RTEMP_FAN_CTRL;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
+
+ data->valid = 0;
+ mutex_lock(&data->update_lock);
+ switch (ix) {
+ case 0:
+ ptemp[0] = SENSORS_LIMIT(val / 1000, 0,
+ data->temp1_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0,
+ data->temp2_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63);
+ if (i2c_smbus_write_byte_data(
+ client,
+ AMC6821_REG_PSV_TEMP,
+ ptemp[0])) {
+ dev_err(&client->dev,
+ "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ goto EXIT;
+ break;
+ case 1:
+ ptemp[1] = SENSORS_LIMIT(
+ val / 1000,
+ (ptemp[0] & 0x7C) + 4,
+ 124);
+ ptemp[1] &= 0x7C;
+ ptemp[2] = SENSORS_LIMIT(
+ ptemp[2], ptemp[1] + 1,
+ 255);
+ break;
+ case 2:
+ ptemp[2] = SENSORS_LIMIT(
+ val / 1000,
+ ptemp[1]+1,
+ 255);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ count = -EINVAL;
+ goto EXIT;
+ }
+ dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
+ if (set_slope_register(client, reg, dpwm, ptemp))
+ count = -EIO;
+
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static ssize_t set_pwm1_auto_point_pwm(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->update_lock);
+ data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254);
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
+ data->pwm1_auto_point_pwm[1])) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ goto EXIT;
+ }
+ dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
+ if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm,
+ data->temp1_auto_point_temp)) {
+ count = -EIO;
+ goto EXIT;
+ }
+ if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm,
+ data->temp2_auto_point_temp)) {
+ count = -EIO;
+ goto EXIT;
+ }
+
+EXIT:
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t get_fan(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ if (0 == data->fan[ix])
+ return sprintf(buf, "0");
+ return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix]));
+}
+
+
+
+static ssize_t get_fan1_fault(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ if (data->stat1 & AMC6821_STAT1_FANS)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+
+
+static ssize_t set_fan(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int ix = to_sensor_dev_attr(attr)->index;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = 1 > val ? 0xFFFF : 6000000/val;
+
+ mutex_lock(&data->update_lock);
+ data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF);
+ if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
+ data->fan[ix] & 0xFF)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ goto EXIT;
+ }
+ if (i2c_smbus_write_byte_data(client,
+ fan_reg_hi[ix], data->fan[ix] >> 8)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static ssize_t get_fan1_div(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ return sprintf(buf, "%d\n", data->fan1_div);
+}
+
+static ssize_t set_fan1_div(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return -EIO;
+ }
+ mutex_lock(&data->update_lock);
+ switch (val) {
+ case 2:
+ config &= ~AMC6821_CONF4_PSPR;
+ data->fan1_div = 2;
+ break;
+ case 4:
+ config |= AMC6821_CONF4_PSPR;
+ data->fan1_div = 4;
+ break;
+ default:
+ mutex_unlock(&data->update_lock);
+ count = -EINVAL;
+ goto EXIT;
+ }
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ count = -EIO;
+ }
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ get_temp, NULL, IDX_TEMP1_INPUT);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MIN);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_CRIT);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_MIN);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP1_CRIT);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
+ get_temp, NULL, IDX_TEMP2_INPUT);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MIN);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MAX);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_CRIT);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO,
+ get_temp2_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_MIN);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_MAX);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
+ get_temp_alarm, NULL, IDX_TEMP2_CRIT);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
+ get_fan, set_fan, IDX_FAN1_MIN);
+static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR,
+ get_fan, set_fan, IDX_FAN1_MAX);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+ get_fan1_div, set_fan1_div, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ get_pwm1_enable, set_pwm1_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO,
+ get_pwm1_auto_point_pwm, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO,
+ get_pwm1_auto_point_pwm, NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
+ get_pwm1_auto_channels_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO,
+ get_temp_auto_point_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2);
+
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2);
+
+
+
+static struct attribute *amc6821_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_max.dev_attr.attr,
+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr,
+ NULL
+};
+
+static struct attribute_group amc6821_attr_grp = {
+ .attrs = amc6821_attrs,
+};
+
+
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int amc6821_detect(
+ struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
+ int dev_id, comp_id;
+
+ dev_dbg(&adapter->dev, "amc6821_detect called.\n");
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_dbg(&adapter->dev,
+ "amc6821: I2C bus doesn't support byte mode, "
+ "skipping.\n");
+ return -ENODEV;
+ }
+
+ dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID);
+ comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID);
+ if (dev_id != 0x21 || comp_id != 0x49) {
+ dev_dbg(&adapter->dev,
+ "amc6821: detection failed at 0x%02x.\n",
+ address);
+ return -ENODEV;
+ }
+
+ /* Bit 7 of the address register is ignored, so we can check the
+ ID registers again */
+ dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID);
+ comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID);
+ if (dev_id != 0x21 || comp_id != 0x49) {
+ dev_dbg(&adapter->dev,
+ "amc6821: detection failed at 0x%02x.\n",
+ address);
+ return -ENODEV;
+ }
+
+ dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address);
+ strlcpy(info->type, "amc6821", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int amc6821_probe(
+ struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct amc6821_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&client->dev, "out of memory.\n");
+ return -ENOMEM;
+ }
+
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /*
+ * Initialize the amc6821 chip
+ */
+ err = amc6821_init_client(client);
+ if (err)
+ goto err_free;
+
+ err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp);
+ if (err)
+ goto err_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (!IS_ERR(data->hwmon_dev))
+ return 0;
+
+ err = PTR_ERR(data->hwmon_dev);
+ dev_err(&client->dev, "error registering hwmon device.\n");
+ sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
+err_free:
+ kfree(data);
+ return err;
+}
+
+static int amc6821_remove(struct i2c_client *client)
+{
+ struct amc6821_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
+
+ kfree(data);
+
+ return 0;
+}
+
+
+static int amc6821_init_client(struct i2c_client *client)
+{
+ int config;
+ int err = -EIO;
+
+ if (init) {
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config |= AMC6821_CONF4_MODE;
+
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
+ config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ dev_info(&client->dev, "Revision %d\n", config & 0x0f);
+
+ config &= ~AMC6821_CONF3_THERM_FAN_EN;
+
+ if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
+ config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config &= ~AMC6821_CONF2_RTFIE;
+ config &= ~AMC6821_CONF2_LTOIE;
+ config &= ~AMC6821_CONF2_RTOIE;
+ if (i2c_smbus_write_byte_data(client,
+ AMC6821_REG_CONF2, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+
+ if (config < 0) {
+ dev_err(&client->dev,
+ "Error reading configuration register, aborting.\n");
+ return err;
+ }
+
+ config &= ~AMC6821_CONF1_THERMOVIE;
+ config &= ~AMC6821_CONF1_FANIE;
+ config |= AMC6821_CONF1_START;
+ if (pwminv)
+ config |= AMC6821_CONF1_PWMINV;
+ else
+ config &= ~AMC6821_CONF1_PWMINV;
+
+ if (i2c_smbus_write_byte_data(
+ client, AMC6821_REG_CONF1, config)) {
+ dev_err(&client->dev,
+ "Configuration register write error, aborting.\n");
+ return err;
+ }
+ }
+ return 0;
+}
+
+
+static struct amc6821_data *amc6821_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int timeout = HZ;
+ u8 reg;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + timeout) ||
+ !data->valid) {
+
+ for (i = 0; i < TEMP_IDX_LEN; i++)
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ temp_reg[i]);
+
+ data->stat1 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_STAT1);
+ data->stat2 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_STAT2);
+
+ data->pwm1 = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_DCY);
+ for (i = 0; i < FAN1_IDX_LEN; i++) {
+ data->fan[i] = i2c_smbus_read_byte_data(
+ client,
+ fan_reg_low[i]);
+ data->fan[i] += i2c_smbus_read_byte_data(
+ client,
+ fan_reg_hi[i]) << 8;
+ }
+ data->fan1_div = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_CONF4);
+ data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
+
+ data->pwm1_auto_point_pwm[0] = 0;
+ data->pwm1_auto_point_pwm[2] = 255;
+ data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_DCY_LOW_TEMP);
+
+ data->temp1_auto_point_temp[0] =
+ i2c_smbus_read_byte_data(client,
+ AMC6821_REG_PSV_TEMP);
+ data->temp2_auto_point_temp[0] =
+ data->temp1_auto_point_temp[0];
+ reg = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_LTEMP_FAN_CTRL);
+ data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1;
+ reg &= 0x07;
+ reg = 0x20 >> reg;
+ if (reg > 0)
+ data->temp1_auto_point_temp[2] =
+ data->temp1_auto_point_temp[1] +
+ (data->pwm1_auto_point_pwm[2] -
+ data->pwm1_auto_point_pwm[1]) / reg;
+ else
+ data->temp1_auto_point_temp[2] = 255;
+
+ reg = i2c_smbus_read_byte_data(client,
+ AMC6821_REG_RTEMP_FAN_CTRL);
+ data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1;
+ reg &= 0x07;
+ reg = 0x20 >> reg;
+ if (reg > 0)
+ data->temp2_auto_point_temp[2] =
+ data->temp2_auto_point_temp[1] +
+ (data->pwm1_auto_point_pwm[2] -
+ data->pwm1_auto_point_pwm[1]) / reg;
+ else
+ data->temp2_auto_point_temp[2] = 255;
+
+ reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+ reg = (reg >> 5) & 0x3;
+ switch (reg) {
+ case 0: /*open loop: software sets pwm1*/
+ data->pwm1_auto_channels_temp = 0;
+ data->pwm1_enable = 1;
+ break;
+ case 2: /*closed loop: remote T (temp2)*/
+ data->pwm1_auto_channels_temp = 2;
+ data->pwm1_enable = 2;
+ break;
+ case 3: /*closed loop: local and remote T (temp2)*/
+ data->pwm1_auto_channels_temp = 3;
+ data->pwm1_enable = 3;
+ break;
+ case 1: /*semi-open loop: software sets rpm, chip controls pwm1,
+ *currently not implemented
+ */
+ data->pwm1_auto_channels_temp = 0;
+ data->pwm1_enable = 0;
+ break;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+
+static int __init amc6821_init(void)
+{
+ return i2c_add_driver(&amc6821_driver);
+}
+
+static void __exit amc6821_exit(void)
+{
+ i2c_del_driver(&amc6821_driver);
+}
+
+module_init(amc6821_init);
+module_exit(amc6821_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>");
+MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver");
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 5a3ee00..6811346 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -5,6 +5,7 @@
* See COPYING in the top level directory of the kernel tree.
*/
+#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/hwmon.h>
#include <linux/list.h>
@@ -101,6 +102,11 @@
int temperature_count;
int fan_count;
struct list_head sensor_list;
+
+ struct {
+ struct dentry *root;
+ u32 id;
+ } debugfs;
};
@@ -624,6 +630,187 @@
return err;
}
+#ifdef CONFIG_DEBUG_FS
+static int atk_debugfs_gitm_get(void *p, u64 *val)
+{
+ struct atk_data *data = p;
+ union acpi_object *ret;
+ struct atk_acpi_ret_buffer *buf;
+ int err = 0;
+
+ if (!data->read_handle)
+ return -ENODEV;
+
+ if (!data->debugfs.id)
+ return -EINVAL;
+
+ ret = atk_gitm(data, data->debugfs.id);
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ buf = (struct atk_acpi_ret_buffer *)ret->buffer.pointer;
+ if (buf->flags)
+ *val = buf->value;
+ else
+ err = -EIO;
+
+ return err;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(atk_debugfs_gitm,
+ atk_debugfs_gitm_get,
+ NULL,
+ "0x%08llx\n")
+
+static int atk_acpi_print(char *buf, size_t sz, union acpi_object *obj)
+{
+ int ret = 0;
+
+ switch (obj->type) {
+ case ACPI_TYPE_INTEGER:
+ ret = snprintf(buf, sz, "0x%08llx\n", obj->integer.value);
+ break;
+ case ACPI_TYPE_STRING:
+ ret = snprintf(buf, sz, "%s\n", obj->string.pointer);
+ break;
+ }
+
+ return ret;
+}
+
+static void atk_pack_print(char *buf, size_t sz, union acpi_object *pack)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < pack->package.count; i++) {
+ union acpi_object *obj = &pack->package.elements[i];
+
+ ret = atk_acpi_print(buf, sz, obj);
+ if (ret >= sz)
+ break;
+ buf += ret;
+ sz -= ret;
+ }
+}
+
+static int atk_debugfs_ggrp_open(struct inode *inode, struct file *file)
+{
+ struct atk_data *data = inode->i_private;
+ char *buf = NULL;
+ union acpi_object *ret;
+ u8 cls;
+ int i;
+
+ if (!data->enumerate_handle)
+ return -ENODEV;
+ if (!data->debugfs.id)
+ return -EINVAL;
+
+ cls = (data->debugfs.id & 0xff000000) >> 24;
+ ret = atk_ggrp(data, cls);
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+
+ for (i = 0; i < ret->package.count; i++) {
+ union acpi_object *pack = &ret->package.elements[i];
+ union acpi_object *id;
+
+ if (pack->type != ACPI_TYPE_PACKAGE)
+ continue;
+ if (!pack->package.count)
+ continue;
+ id = &pack->package.elements[0];
+ if (id->integer.value == data->debugfs.id) {
+ /* Print the package */
+ buf = kzalloc(512, GFP_KERNEL);
+ if (!buf) {
+ ACPI_FREE(ret);
+ return -ENOMEM;
+ }
+ atk_pack_print(buf, 512, pack);
+ break;
+ }
+ }
+ ACPI_FREE(ret);
+
+ if (!buf)
+ return -EINVAL;
+
+ file->private_data = buf;
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t atk_debugfs_ggrp_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ char *str = file->private_data;
+ size_t len = strlen(str);
+
+ return simple_read_from_buffer(buf, count, pos, str, len);
+}
+
+static int atk_debugfs_ggrp_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
+static const struct file_operations atk_debugfs_ggrp_fops = {
+ .read = atk_debugfs_ggrp_read,
+ .open = atk_debugfs_ggrp_open,
+ .release = atk_debugfs_ggrp_release,
+};
+
+static void atk_debugfs_init(struct atk_data *data)
+{
+ struct dentry *d;
+ struct dentry *f;
+
+ data->debugfs.id = 0;
+
+ d = debugfs_create_dir("asus_atk0110", NULL);
+ if (!d || IS_ERR(d))
+ return;
+
+ f = debugfs_create_x32("id", S_IRUSR | S_IWUSR, d, &data->debugfs.id);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ f = debugfs_create_file("gitm", S_IRUSR, d, data,
+ &atk_debugfs_gitm);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ f = debugfs_create_file("ggrp", S_IRUSR, d, data,
+ &atk_debugfs_ggrp_fops);
+ if (!f || IS_ERR(f))
+ goto cleanup;
+
+ data->debugfs.root = d;
+
+ return;
+cleanup:
+ debugfs_remove_recursive(d);
+}
+
+static void atk_debugfs_cleanup(struct atk_data *data)
+{
+ debugfs_remove_recursive(data->debugfs.root);
+}
+
+#else /* CONFIG_DEBUG_FS */
+
+static void atk_debugfs_init(struct atk_data *data)
+{
+}
+
+static void atk_debugfs_cleanup(struct atk_data *data)
+{
+}
+#endif
+
static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
{
struct device *dev = &data->acpi_dev->dev;
@@ -1047,76 +1234,75 @@
return err;
}
-static int atk_check_old_if(struct atk_data *data)
+static int atk_probe_if(struct atk_data *data)
{
struct device *dev = &data->acpi_dev->dev;
acpi_handle ret;
acpi_status status;
+ int err = 0;
/* RTMP: read temperature */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_TMP, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rtmp_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_TMP " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rtmp_handle = ret;
/* RVLT: read voltage */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_VLT, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rvlt_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_VLT " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rvlt_handle = ret;
/* RFAN: read fan status */
status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_FAN, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->rfan_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_OLD_READ_FAN " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->rfan_handle = ret;
-
- return 0;
-}
-
-static int atk_check_new_if(struct atk_data *data)
-{
- struct device *dev = &data->acpi_dev->dev;
- acpi_handle ret;
- acpi_status status;
/* Enumeration */
status = acpi_get_handle(data->atk_handle, METHOD_ENUMERATE, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->enumerate_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_ENUMERATE " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->enumerate_handle = ret;
/* De-multiplexer (read) */
status = acpi_get_handle(data->atk_handle, METHOD_READ, &ret);
- if (status != AE_OK) {
+ if (ACPI_SUCCESS(status))
+ data->read_handle = ret;
+ else
dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->read_handle = ret;
/* De-multiplexer (write) */
status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
- if (status != AE_OK) {
- dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+ if (ACPI_SUCCESS(status))
+ data->write_handle = ret;
+ else
+ dev_dbg(dev, "method " METHOD_WRITE " not found: %s\n",
acpi_format_exception(status));
- return -ENODEV;
- }
- data->write_handle = ret;
- return 0;
+ /* Check for hwmon methods: first check "old" style methods; note that
+ * both may be present: in this case we stick to the old interface;
+ * analysis of multiple DSDTs indicates that when both interfaces
+ * are present the new one (GGRP/GITM) is not functional.
+ */
+ if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle)
+ data->old_interface = true;
+ else if (data->enumerate_handle && data->read_handle &&
+ data->write_handle)
+ data->old_interface = false;
+ else
+ err = -ENODEV;
+
+ return err;
}
static int atk_add(struct acpi_device *device)
@@ -1155,28 +1341,19 @@
}
ACPI_FREE(buf.pointer);
- /* Check for hwmon methods: first check "old" style methods; note that
- * both may be present: in this case we stick to the old interface;
- * analysis of multiple DSDTs indicates that when both interfaces
- * are present the new one (GGRP/GITM) is not functional.
- */
- err = atk_check_old_if(data);
- if (!err) {
- dev_dbg(&device->dev, "Using old hwmon interface\n");
- data->old_interface = true;
- } else {
- err = atk_check_new_if(data);
- if (err)
- goto out;
-
- dev_dbg(&device->dev, "Using new hwmon interface\n");
- data->old_interface = false;
+ err = atk_probe_if(data);
+ if (err) {
+ dev_err(&device->dev, "No usable hwmon interface detected\n");
+ goto out;
}
- if (data->old_interface)
+ if (data->old_interface) {
+ dev_dbg(&device->dev, "Using old hwmon interface\n");
err = atk_enumerate_old_hwmon(data);
- else
+ } else {
+ dev_dbg(&device->dev, "Using new hwmon interface\n");
err = atk_enumerate_new_hwmon(data);
+ }
if (err < 0)
goto out;
if (err == 0) {
@@ -1190,6 +1367,8 @@
if (err)
goto cleanup;
+ atk_debugfs_init(data);
+
device->driver_data = data;
return 0;
cleanup:
@@ -1208,6 +1387,8 @@
device->driver_data = NULL;
+ atk_debugfs_cleanup(data);
+
atk_remove_files(data);
atk_free_sensors(data);
hwmon_device_unregister(data->hwmon_dev);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index caef39c..2d7bcee 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -33,6 +33,7 @@
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
+#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
@@ -161,6 +162,7 @@
int usemsr_ee = 1;
int err;
u32 eax, edx;
+ struct pci_dev *host_bridge;
/* Early chips have no MSR for TjMax */
@@ -168,11 +170,21 @@
usemsr_ee = 0;
}
- /* Atoms seems to have TjMax at 90C */
+ /* Atom CPUs */
if (c->x86_model == 0x1c) {
usemsr_ee = 0;
- tjmax = 90000;
+
+ host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+
+ if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL
+ && (host_bridge->device == 0xa000 /* NM10 based nettop */
+ || host_bridge->device == 0xa010)) /* NM10 based netbook */
+ tjmax = 100000;
+ else
+ tjmax = 90000;
+
+ pci_dev_put(host_bridge);
}
if ((c->x86_model > 0xe) && (usemsr_ee)) {
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index d8a26d1..099a213 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -33,6 +33,16 @@
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
+/* CPUID function 0x80000001, ebx */
+#define CPUID_PKGTYPE_MASK 0xf0000000
+#define CPUID_PKGTYPE_F 0x00000000
+#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
+
+/* DRAM controller (PCI function 2) */
+#define REG_DCT0_CONFIG_HIGH 0x094
+#define DDR3_MODE 0x00000100
+
+/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
#define HTC_ENABLE 0x00000001
@@ -85,13 +95,28 @@
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static bool __devinit has_erratum_319(void)
+static bool __devinit has_erratum_319(struct pci_dev *pdev)
{
+ u32 pkg_type, reg_dram_cfg;
+
+ if (boot_cpu_data.x86 != 0x10)
+ return false;
+
/*
- * Erratum 319: The thermal sensor of older Family 10h processors
- * (B steppings) may be unreliable.
+ * Erratum 319: The thermal sensor of Socket F/AM2+ processors
+ * may be unreliable.
*/
- return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+ pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
+ if (pkg_type == CPUID_PKGTYPE_F)
+ return true;
+ if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
+ return false;
+
+ /* Differentiate between AM2+ (bad) and AM3 (good) */
+ pci_bus_read_config_dword(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
+ REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
+ return !(reg_dram_cfg & DDR3_MODE);
}
static int __devinit k10temp_probe(struct pci_dev *pdev,
@@ -99,9 +124,10 @@
{
struct device *hwmon_dev;
u32 reg_caps, reg_htc;
+ int unreliable = has_erratum_319(pdev);
int err;
- if (has_erratum_319() && !force) {
+ if (unreliable && !force) {
dev_err(&pdev->dev,
"unreliable CPU thermal sensor; monitoring disabled\n");
err = -ENODEV;
@@ -139,7 +165,7 @@
}
dev_set_drvdata(&pdev->dev, hwmon_dev);
- if (has_erratum_319() && force)
+ if (unreliable && force)
dev_warn(&pdev->dev,
"unreliable CPU thermal sensor; check erratum 319\n");
return 0;
@@ -169,7 +195,7 @@
dev_set_drvdata(&pdev->dev, NULL);
}
-static struct pci_device_id k10temp_id_table[] = {
+static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{}
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 1fe9951..0ceb6d6 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -136,7 +136,7 @@
static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static struct pci_device_id k8temp_ids[] = {
+static const struct pci_device_id k8temp_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ 0 },
};
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 12f2e70..79c2931 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -697,7 +697,7 @@
return data;
}
-static struct pci_device_id sis5595_pci_ids[] = {
+static const struct pci_device_id sis5595_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ 0, }
};
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 39e82a4..f397ce7 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -767,7 +767,7 @@
return data;
}
-static struct pci_device_id via686a_pci_ids[] = {
+static const struct pci_device_id via686a_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
{ 0, }
};
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 470a122..d47b4c9 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -697,7 +697,7 @@
.remove = __devexit_p(vt8231_remove),
};
-static struct pci_device_id vt8231_pci_ids[] = {
+static const struct pci_device_id vt8231_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index f70f465..4687af4 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -87,9 +87,9 @@
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+ } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -157,9 +157,9 @@
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+ } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 0ed68e2..f7346a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -75,7 +75,7 @@
unsigned long timeout;
if (irq > -1) {
- ret = wait_event_interruptible_timeout(pca_wait,
+ ret = wait_event_timeout(pca_wait,
pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI, pca_isa_ops.timeout);
} else {
@@ -96,7 +96,7 @@
}
static irqreturn_t pca_handler(int this_irq, void *dev_id) {
- wake_up_interruptible(&pca_wait);
+ wake_up(&pca_wait);
return IRQ_HANDLED;
}
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index c4df9d4..5b2213d 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -84,7 +84,7 @@
unsigned long timeout;
if (i2c->irq) {
- ret = wait_event_interruptible_timeout(i2c->wait,
+ ret = wait_event_timeout(i2c->wait,
i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI, i2c->adap.timeout);
} else {
@@ -122,7 +122,7 @@
if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
return IRQ_NONE;
- wake_up_interruptible(&i2c->wait);
+ wake_up(&i2c->wait);
return IRQ_HANDLED;
}
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 1e245e9..e56e4b6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -324,12 +324,12 @@
else
msleep(1);
- while ((timeout++ < MAX_TIMEOUT) &&
+ while ((++timeout < MAX_TIMEOUT) &&
((temp = inb_p(SMBHSTSTS)) & 0x01))
msleep(1);
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index e4b1543..a84a909 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -165,10 +165,10 @@
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0ac2f90..10be7b5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -248,7 +248,7 @@
NULL
};
-const static struct dev_pm_ops i2c_device_pm_ops = {
+static const struct dev_pm_ops i2c_device_pm_ops = {
.suspend = i2c_device_pm_suspend,
.resume = i2c_device_pm_resume,
};
@@ -843,6 +843,9 @@
adap->dev.parent);
#endif
+ /* device name is gone after device_unregister */
+ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
@@ -855,8 +858,6 @@
idr_remove(&i2c_adapter_idr, adap->nr);
mutex_unlock(&core_lock);
- dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
-
/* Clear the device structure in case this adapter is ever going to be
added again */
memset(&adap->dev, 0, sizeof(adap->dev));
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index fbdd731..cc9b594 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2083,7 +2083,7 @@
static int cma_check_linklocal(struct rdma_dev_addr *dev_addr,
struct sockaddr *addr)
{
-#if defined(CONFIG_IPv6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
struct sockaddr_in6 *sin6;
if (addr->sa_family != AF_INET6)
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 989555c..2a97c96 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1752,7 +1752,7 @@
ind = qp->rq.head & (qp->rq.wqe_cnt - 1);
for (nreq = 0; wr; ++nreq, wr = wr->next) {
- if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.send_cq)) {
+ if (mlx4_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
err = -ENOMEM;
*bad_wr = wr;
goto out;
diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c
index d425652..cf8085b 100644
--- a/drivers/infiniband/hw/mlx4/srq.c
+++ b/drivers/infiniband/hw/mlx4/srq.c
@@ -74,6 +74,7 @@
struct mlx4_ib_dev *dev = to_mdev(pd->device);
struct mlx4_ib_srq *srq;
struct mlx4_wqe_srq_next_seg *next;
+ struct mlx4_wqe_data_seg *scatter;
int desc_size;
int buf_size;
int err;
@@ -149,6 +150,11 @@
next = get_wqe(srq, i);
next->next_wqe_index =
cpu_to_be16((i + 1) & (srq->msrq.max - 1));
+
+ for (scatter = (void *) (next + 1);
+ (void *) scatter < (void *) next + desc_size;
+ ++scatter)
+ scatter->lkey = cpu_to_be32(MLX4_INVALID_LKEY);
}
err = mlx4_mtt_init(dev->dev, srq->buf.npages, srq->buf.page_shift,
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index dee6706..258c639 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -59,7 +59,8 @@
client->head &= EVDEV_BUFFER_SIZE - 1;
spin_unlock(&client->buffer_lock);
- kill_fasync(&client->fasync, SIGIO, POLL_IN);
+ if (event->type == EV_SYN)
+ kill_fasync(&client->fasync, SIGIO, POLL_IN);
}
/*
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ab06071..30b503b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -24,6 +24,7 @@
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include <linux/smp_lock.h>
+#include "input-compat.h"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
@@ -764,6 +765,40 @@
return error;
}
+#ifdef CONFIG_COMPAT
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ int len = 0;
+
+ if (INPUT_COMPAT_TEST) {
+ u32 dword = bits >> 32;
+ if (dword || !skip_empty)
+ len += snprintf(buf, buf_size, "%x ", dword);
+
+ dword = bits & 0xffffffffUL;
+ if (dword || !skip_empty || len)
+ len += snprintf(buf + len, max(buf_size - len, 0),
+ "%x", dword);
+ } else {
+ if (bits || !skip_empty)
+ len += snprintf(buf, buf_size, "%lx", bits);
+ }
+
+ return len;
+}
+
+#else /* !CONFIG_COMPAT */
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ return bits || !skip_empty ?
+ snprintf(buf, buf_size, "%lx", bits) : 0;
+}
+
+#endif
#ifdef CONFIG_PROC_FS
@@ -832,14 +867,25 @@
unsigned long *bitmap, int max)
{
int i;
-
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
+ bool skip_empty = true;
+ char buf[18];
seq_printf(seq, "B: %s=", name);
- for (; i >= 0; i--)
- seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : "");
+
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ if (input_bits_to_string(buf, sizeof(buf),
+ bitmap[i], skip_empty)) {
+ skip_empty = false;
+ seq_printf(seq, "%s%s", buf, i > 0 ? " " : "");
+ }
+ }
+
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (skip_empty)
+ seq_puts(seq, "0");
+
seq_putc(seq, '\n');
}
@@ -1128,14 +1174,23 @@
{
int i;
int len = 0;
+ bool skip_empty = true;
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ len += input_bits_to_string(buf + len, max(buf_size - len, 0),
+ bitmap[i], skip_empty);
+ if (len) {
+ skip_empty = false;
+ if (i > 0)
+ len += snprintf(buf + len, max(buf_size - len, 0), " ");
+ }
+ }
- for (; i >= 0; i--)
- len += snprintf(buf + len, max(buf_size - len, 0),
- "%lx%s", bitmap[i], i > 0 ? " " : "");
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (len == 0)
+ len = snprintf(buf, buf_size, "%d", 0);
if (add_cr)
len += snprintf(buf + len, max(buf_size - len, 0), "\n");
@@ -1150,7 +1205,8 @@
{ \
struct input_dev *input_dev = to_input_dev(dev); \
int len = input_print_bitmap(buf, PAGE_SIZE, \
- input_dev->bm##bit, ev##_MAX, 1); \
+ input_dev->bm##bit, ev##_MAX, \
+ true); \
return min_t(int, len, PAGE_SIZE); \
} \
static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL)
@@ -1214,7 +1270,7 @@
len = input_print_bitmap(&env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen,
- bitmap, max, 0);
+ bitmap, max, false);
if (len >= (sizeof(env->buf) - env->buflen))
return -ENOMEM;
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 67c207f..45ac70e 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -277,7 +277,7 @@
}
#ifdef RESET_WORKS
- if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) ||
+ if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) &&
(gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) {
err = -ENODEV;
goto fail2;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 482cb12..8a28fb7 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -446,7 +446,7 @@
}
exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
__func__, retval);
@@ -571,7 +571,7 @@
xpad->odata[6] = 0x00;
xpad->odata[7] = 0x00;
xpad->irq_out->transfer_buffer_length = 8;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
}
return 0;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1f5e2ce..7b40562 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -225,8 +225,10 @@
struct delayed_work event_work;
unsigned long event_jiffies;
- struct mutex event_mutex;
unsigned long event_mask;
+
+ /* Serializes reconnect(), attr->set() and event work */
+ struct mutex mutex;
};
/*
@@ -577,7 +579,7 @@
{
struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
- mutex_lock(&atkbd->event_mutex);
+ mutex_lock(&atkbd->mutex);
if (!atkbd->enabled) {
/*
@@ -596,7 +598,7 @@
atkbd_set_repeat_rate(atkbd);
}
- mutex_unlock(&atkbd->event_mutex);
+ mutex_unlock(&atkbd->mutex);
}
/*
@@ -612,7 +614,7 @@
atkbd->event_jiffies = jiffies;
set_bit(event_bit, &atkbd->event_mask);
- wmb();
+ mb();
schedule_delayed_work(&atkbd->event_work, delay);
}
@@ -849,13 +851,20 @@
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+ sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
atkbd_disable(atkbd);
- /* make sure we don't have a command in flight */
+ input_unregister_device(atkbd->dev);
+
+ /*
+ * Make sure we don't have a command in flight.
+ * Note that since atkbd->enabled is false event work will keep
+ * rescheduling itself until it gets canceled and will not try
+ * accessing freed input device or serio port.
+ */
cancel_delayed_work_sync(&atkbd->event_work);
- sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
- input_unregister_device(atkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(atkbd);
@@ -1087,7 +1096,7 @@
atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
- mutex_init(&atkbd->event_mutex);
+ mutex_init(&atkbd->mutex);
switch (serio->id.type) {
@@ -1160,19 +1169,23 @@
{
struct atkbd *atkbd = serio_get_drvdata(serio);
struct serio_driver *drv = serio->drv;
+ int retval = -1;
if (!atkbd || !drv) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
+ mutex_lock(&atkbd->mutex);
+
atkbd_disable(atkbd);
if (atkbd->write) {
if (atkbd_probe(atkbd))
- return -1;
+ goto out;
+
if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
- return -1;
+ goto out;
atkbd_activate(atkbd);
@@ -1190,8 +1203,11 @@
}
atkbd_enable(atkbd);
+ retval = 0;
- return 0;
+ out:
+ mutex_unlock(&atkbd->mutex);
+ return retval;
}
static struct serio_device_id atkbd_serio_ids[] = {
@@ -1235,47 +1251,28 @@
ssize_t (*handler)(struct atkbd *, char *))
{
struct serio *serio = to_serio_port(dev);
- int retval;
+ struct atkbd *atkbd = serio_get_drvdata(serio);
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
-
-out:
- serio_unpin_driver(serio);
- return retval;
+ return handler(atkbd, buf);
}
static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
ssize_t (*handler)(struct atkbd *, const char *, size_t))
{
struct serio *serio = to_serio_port(dev);
- struct atkbd *atkbd;
+ struct atkbd *atkbd = serio_get_drvdata(serio);
int retval;
- retval = serio_pin_driver(serio);
+ retval = mutex_lock_interruptible(&atkbd->mutex);
if (retval)
return retval;
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- atkbd = serio_get_drvdata(serio);
atkbd_disable(atkbd);
retval = handler(atkbd, buf, count);
atkbd_enable(atkbd);
-out:
- serio_unpin_driver(serio);
+ mutex_unlock(&atkbd->mutex);
+
return retval;
}
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index 6e52d85..d410d7a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -174,6 +174,14 @@
struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
int error, i;
+ if (pdata->device_enable) {
+ error = pdata->device_enable(dev);
+ if (error < 0) {
+ dev_dbg(dev, "device enable function failed\n");
+ return error;
+ }
+ }
+
if (!pdata->keymap) {
dev_dbg(dev, "no keymap from pdata\n");
return -EINVAL;
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 0d1d334..4f8fe08 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -139,6 +139,7 @@
/* trackpad finger data size, empirically at least ten fingers */
#define SIZEOF_FINGER sizeof(struct tp_finger)
#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
+#define MAX_FINGER_ORIENTATION 16384
/* device-specific parameters */
struct bcm5974_param {
@@ -284,6 +285,26 @@
input_set_abs_params(input_dev, ABS_Y,
0, cfg->y.dim, cfg->y.fuzz, 0);
+ /* finger touch area */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger approach area */
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger orientation */
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+ -MAX_FINGER_ORIENTATION,
+ MAX_FINGER_ORIENTATION, 0, 0);
+ /* finger position */
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ cfg->x.devmin, cfg->x.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ cfg->y.devmin, cfg->y.devmax, 0, 0);
+
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
@@ -310,13 +331,29 @@
return 0;
}
+static void report_finger_data(struct input_dev *input,
+ const struct bcm5974_config *cfg,
+ const struct tp_finger *f)
+{
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major));
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor));
+ input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major));
+ input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor));
+ input_report_abs(input, ABS_MT_ORIENTATION,
+ MAX_FINGER_ORIENTATION - raw2int(f->orientation));
+ input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x));
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y));
+ input_mt_sync(input);
+}
+
/* report trackpad data as logical trackpad state */
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
const struct tp_finger *f;
struct input_dev *input = dev->input;
- int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int raw_p, raw_w, raw_x, raw_y, raw_n, i;
int ptest, origin, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
@@ -329,6 +366,11 @@
/* always track the first finger; when detached, start over */
if (raw_n) {
+
+ /* report raw trackpad data */
+ for (i = 0; i < raw_n; i++)
+ report_finger_data(input, c, &f[i]);
+
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 401ac6b..9774bdf 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -627,8 +627,15 @@
synaptics_hardware = true;
if (max_proto > PSMOUSE_IMEX) {
- if (!set_properties || synaptics_init(psmouse) == 0)
+/*
+ * Try activating protocol, but check if support is enabled first, since
+ * we try detecting Synaptics even when protocol is disabled.
+ */
+ if (synaptics_supported() &&
+ (!set_properties || synaptics_init(psmouse) == 0)) {
return PSMOUSE_SYNAPTICS;
+ }
+
/*
* Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
* Unfortunately Logitech/Genius probes confuse some firmware versions so
@@ -683,19 +690,6 @@
max_proto = PSMOUSE_IMEX;
}
-/*
- * Try Finger Sensing Pad
- */
- if (max_proto > PSMOUSE_IMEX) {
- if (fsp_detect(psmouse, set_properties) == 0) {
- if (!set_properties || fsp_init(psmouse) == 0)
- return PSMOUSE_FSP;
-/*
- * Init failed, try basic relative protocols
- */
- max_proto = PSMOUSE_IMEX;
- }
- }
if (max_proto > PSMOUSE_IMEX) {
if (genius_detect(psmouse, set_properties) == 0)
@@ -712,6 +706,21 @@
}
/*
+ * Try Finger Sensing Pad. We do it here because its probe upsets
+ * Trackpoint devices (causing TP_READ_ID command to time out).
+ */
+ if (max_proto > PSMOUSE_IMEX) {
+ if (fsp_detect(psmouse, set_properties) == 0) {
+ if (!set_properties || fsp_init(psmouse) == 0)
+ return PSMOUSE_FSP;
+/*
+ * Init failed, try basic relative protocols
+ */
+ max_proto = PSMOUSE_IMEX;
+ }
+ }
+
+/*
* Reset to defaults in case the device got confused by extended
* protocol probes. Note that we follow up with full reset because
* some mice put themselves to sleep when they see PSMOUSE_RESET_DIS.
@@ -1450,24 +1459,10 @@
struct serio *serio = to_serio_port(dev);
struct psmouse_attribute *attr = to_psmouse_attr(devattr);
struct psmouse *psmouse;
- int retval;
-
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out;
- }
psmouse = serio_get_drvdata(serio);
- retval = attr->show(psmouse, attr->data, buf);
-
-out:
- serio_unpin_driver(serio);
- return retval;
+ return attr->show(psmouse, attr->data, buf);
}
ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr,
@@ -1478,18 +1473,9 @@
struct psmouse *psmouse, *parent = NULL;
int retval;
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out_unpin;
- }
-
retval = mutex_lock_interruptible(&psmouse_mutex);
if (retval)
- goto out_unpin;
+ goto out;
psmouse = serio_get_drvdata(serio);
@@ -1519,8 +1505,7 @@
out_unlock:
mutex_unlock(&psmouse_mutex);
- out_unpin:
- serio_unpin_driver(serio);
+ out:
return retval;
}
@@ -1582,9 +1567,7 @@
}
mutex_unlock(&psmouse_mutex);
- serio_unpin_driver(serio);
serio_unregister_child_port(serio);
- serio_pin_driver_uninterruptible(serio);
mutex_lock(&psmouse_mutex);
if (serio->drv != &psmouse_drv) {
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 77b9fd0..81a6b81 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -658,9 +658,9 @@
if (packet[3] & BIT(1))
button_status |= 0x0f; /* wheel up */
if (packet[3] & BIT(2))
- button_status |= BIT(5);/* horizontal left */
+ button_status |= BIT(4);/* horizontal left */
if (packet[3] & BIT(3))
- button_status |= BIT(4);/* horizontal right */
+ button_status |= BIT(5);/* horizontal right */
/* push back to packet queue */
if (button_status != 0)
packet[3] = button_status;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 05689e7..d3f5243 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -743,6 +743,11 @@
return -1;
}
+bool synaptics_supported(void)
+{
+ return true;
+}
+
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
void __init synaptics_module_init(void)
@@ -754,5 +759,10 @@
return -ENOSYS;
}
+bool synaptics_supported(void)
+{
+ return false;
+}
+
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 838e7f2..f0f40a3 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -109,5 +109,6 @@
int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
+bool synaptics_supported(void);
#endif /* _SYNAPTICS_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 64b688d..2a5982e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -524,6 +524,13 @@
*/
static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
{
+ /* Acer Aspire 5610 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ },
+ },
+ {
/* Acer Aspire 5630 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index a6624ad..1a1420d 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3152,7 +3152,7 @@
hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
int slot_rx, int bank_rx)
{
- if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+ if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
/* disable PCM */
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
return;
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 96faa79..f96feeb 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -660,7 +660,7 @@
return 0;
}
-static struct of_device_id smu_platform_match[] =
+static const struct of_device_id smu_platform_match[] =
{
{
.type = "smu",
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index ea32c7e..454bc50 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -2211,7 +2211,7 @@
return 0;
}
-static struct of_device_id fcu_match[] =
+static const struct of_device_id fcu_match[] =
{
{
.type = "fcu",
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3fbe41b..ba48fd7 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -457,7 +457,7 @@
return 0;
}
-static struct of_device_id therm_of_match[] = {{
+static const struct of_device_id therm_of_match[] = {{
.name = "fan",
.compatible = "adm1030"
}, {}
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index bff7a53..b521ed9 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -13,7 +13,7 @@
*/
-#include <linux/usb/input.h>
+#include <linux/input.h>
#include <media/ir-common.h>
#define IR_TAB_MIN_SIZE 32
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
index c190b0d..2833137 100644
--- a/drivers/media/common/tuners/tda8290.c
+++ b/drivers/media/common/tuners/tda8290.c
@@ -144,7 +144,8 @@
}
if (params->mode == V4L2_TUNER_RADIO) {
- priv->tda8290_easy_mode = 0x01; /* Start with MN values */
+ /* Set TDA8295 to FM radio; Start TDA8290 with MN values */
+ priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
tuner_dbg("setting to radio FM\n");
} else {
tuner_dbg("setting tda829x to system %s\n", mode);
@@ -672,16 +673,19 @@
static int tda8295_probe(struct tuner_i2c_props *i2c_props)
{
#define TDA8295_ID 0x8a
+#define TDA8295C2_ID 0x8b
unsigned char tda8295_id[] = { 0x2f, 0x00 };
/* detect tda8295 */
tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1);
tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1);
- if (tda8295_id[1] == TDA8295_ID) {
+ if ((tda8295_id[1] & 0xfe) == TDA8295_ID) {
if (debug)
- printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n",
- __func__, i2c_adapter_id(i2c_props->adap),
+ printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
+ __func__, (tda8295_id[1] == TDA8295_ID) ?
+ "tda8295c1" : "tda8295c2",
+ i2c_adapter_id(i2c_props->adap),
i2c_props->addr);
return 0;
}
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 35d0817..cf8f65f 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -72,6 +72,10 @@
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pt1/Kconfig"
+comment "Supported Mantis Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/dvb/mantis/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index 16d262d..c12922c 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -2,6 +2,18 @@
# Makefile for the kernel multimedia device drivers.
#
-obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
+obj-y := dvb-core/ \
+ frontends/ \
+ ttpci/ \
+ ttusb-dec/ \
+ ttusb-budget/ \
+ b2c2/ \
+ bt8xx/ \
+ dvb-usb/ \
+ pluto2/ \
+ siano/ \
+ dm1105/ \
+ pt1/ \
+ mantis/
obj-$(CONFIG_DVB_FIREDTV) += firewire/
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index a3b8b697..cd7f9b7 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -208,6 +208,14 @@
help
A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+config DVB_MB86A16
+ tristate "Fujitsu MB86A16 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-S/DSS Direct Conversion reveiver.
+ Say Y when you want to support this frontend.
+
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
@@ -587,6 +595,17 @@
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
+config DVB_TDA665x
+ tristate "TDA665x tuner"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+ Say Y when you want to support this chip.
+
+ Currently supported tuners:
+ * Panasonic ENV57H12D5 (ET-50DT)
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 47575cc..874e8ad 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -64,6 +64,7 @@
obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o
obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
+obj-$(CONFIG_DVB_TDA665x) += tda665x.o
obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
@@ -80,3 +81,4 @@
obj-$(CONFIG_DVB_ISL6423) += isl6423.o
obj-$(CONFIG_DVB_EC100) += ec100.o
obj-$(CONFIG_DVB_DS3000) += ds3000.o
+obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
index d99619a..b1ee207 100644
--- a/drivers/media/dvb/frontends/dib8000.h
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -100,7 +100,7 @@
static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return CT_SHUTDOWN,
+ return CT_SHUTDOWN;
}
static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
{
diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h
index 4fa6e52..9cb11c9 100644
--- a/drivers/media/dvb/frontends/lgdt3305.h
+++ b/drivers/media/dvb/frontends/lgdt3305.h
@@ -54,13 +54,13 @@
u16 usref_qam256; /* default: 0x2a80 */
/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
- int deny_i2c_rptr:1;
+ unsigned int deny_i2c_rptr:1;
/* spectral inversion - 0:disabled 1:enabled */
- int spectral_inversion:1;
+ unsigned int spectral_inversion:1;
/* use RF AGC loop - 0:disabled 1:enabled */
- int rf_agc_loop:1;
+ unsigned int rf_agc_loop:1;
enum lgdt3305_mpeg_mode mpeg_mode;
enum lgdt3305_tp_clock_edge tpclk_edge;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
new file mode 100644
index 0000000..d05f750
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -0,0 +1,1878 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "dvb_frontend.h"
+#include "mb86a16.h"
+#include "mb86a16_priv.h"
+
+unsigned int verbose = 5;
+module_param(verbose, int, 0644);
+
+#define ABS(x) ((x) < 0 ? (-x) : (x))
+
+struct mb86a16_state {
+ struct i2c_adapter *i2c_adap;
+ const struct mb86a16_config *config;
+ struct dvb_frontend frontend;
+
+ /* tuning parameters */
+ int frequency;
+ int srate;
+
+ /* Internal stuff */
+ int master_clk;
+ int deci;
+ int csel;
+ int rsel;
+};
+
+#define MB86A16_ERROR 0
+#define MB86A16_NOTICE 1
+#define MB86A16_INFO 2
+#define MB86A16_DEBUG 3
+
+#define dprintk(x, y, z, format, arg...) do { \
+ if (z) { \
+ if ((x > MB86A16_ERROR) && (x > y)) \
+ printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_NOTICE) && (x > y)) \
+ printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_INFO) && (x > y)) \
+ printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_DEBUG) && (x > y)) \
+ printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \
+ } else { \
+ if (x > y) \
+ printk(format, ##arg); \
+ } \
+} while (0)
+
+#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
+#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
+
+static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val)
+{
+ int ret;
+ u8 buf[] = { reg, val };
+
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = buf,
+ .len = 2
+ };
+
+ dprintk(verbose, MB86A16_DEBUG, 1,
+ "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]",
+ state->config->demod_address, buf[0], buf[1]);
+
+ ret = i2c_transfer(state->i2c_adap, &msg, 1);
+
+ return (ret != 1) ? -EREMOTEIO : 0;
+}
+
+static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+
+ struct i2c_msg msg[] = {
+ {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = b0,
+ .len = 1
+ }, {
+ .addr = state->config->demod_address,
+ .flags = I2C_M_RD,
+ .buf = b1,
+ .len = 1
+ }
+ };
+ ret = i2c_transfer(state->i2c_adap, msg, 2);
+ if (ret != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)",
+ reg, ret);
+
+ return -EREMOTEIO;
+ }
+ *val = b1[0];
+
+ return ret;
+}
+
+static int CNTM_set(struct mb86a16_state *state,
+ unsigned char timint1,
+ unsigned char timint2,
+ unsigned char cnext)
+{
+ unsigned char val;
+
+ val = (timint1 << 4) | (timint2 << 2) | cnext;
+ if (mb86a16_write(state, MB86A16_CNTMR, val) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int smrt_set(struct mb86a16_state *state, int rate)
+{
+ int tmp ;
+ int m ;
+ unsigned char STOFS0, STOFS1;
+
+ m = 1 << state->deci;
+ tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk;
+
+ STOFS0 = tmp & 0x0ff;
+ STOFS1 = (tmp & 0xf00) >> 8;
+
+ if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) |
+ (state->csel << 1) |
+ state->rsel) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+}
+
+static int srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int afcex_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+
+ return -1;
+}
+
+static int afcofs_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, 0x58, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x59, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int stlp_set(struct mb86a16_state *state,
+ unsigned char STRAS,
+ unsigned char STRBS)
+{
+ if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA)
+{
+ if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int initial_set(struct mb86a16_state *state)
+{
+ if (stlp_set(state, 5, 7))
+ goto err;
+
+ udelay(100);
+ if (afcex_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (afcofs_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x2f, 0x21) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x54, 0xff) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int S01T_set(struct mb86a16_state *state,
+ unsigned char s1t,
+ unsigned s0t)
+{
+ if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+
+static int EN_set(struct mb86a16_state *state,
+ int cren,
+ int afcen)
+{
+ unsigned char val;
+
+ val = 0x7a | (cren << 7) | (afcen << 2);
+ if (mb86a16_write(state, 0x49, val) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int AFCEXEN_set(struct mb86a16_state *state,
+ int afcexen,
+ int smrt)
+{
+ unsigned char AFCA ;
+
+ if (smrt > 18875)
+ AFCA = 4;
+ else if (smrt > 9375)
+ AFCA = 3;
+ else if (smrt > 2250)
+ AFCA = 2;
+ else
+ AFCA = 1;
+
+ if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int DAGC_data_set(struct mb86a16_state *state,
+ unsigned char DAGCA,
+ unsigned char DAGCW)
+{
+ if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static void smrt_info_get(struct mb86a16_state *state, int rate)
+{
+ if (rate >= 37501) {
+ state->deci = 0; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 30001) {
+ state->deci = 0; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 26251) {
+ state->deci = 0; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 22501) {
+ state->deci = 0; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 18751) {
+ state->deci = 1; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 15001) {
+ state->deci = 1; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 13126) {
+ state->deci = 1; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 11251) {
+ state->deci = 1; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 9376) {
+ state->deci = 2; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 7501) {
+ state->deci = 2; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 6563) {
+ state->deci = 2; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 5626) {
+ state->deci = 2; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 4688) {
+ state->deci = 3; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 3751) {
+ state->deci = 3; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 3282) {
+ state->deci = 3; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 2814) {
+ state->deci = 3; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 2344) {
+ state->deci = 4; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 1876) {
+ state->deci = 4; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 1641) {
+ state->deci = 4; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 1407) {
+ state->deci = 4; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 1172) {
+ state->deci = 5; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 939) {
+ state->deci = 5; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 821) {
+ state->deci = 5; state->csel = 1; state->rsel = 0;
+ } else {
+ state->deci = 5; state->csel = 1; state->rsel = 1;
+ }
+
+ if (state->csel == 0)
+ state->master_clk = 92000;
+ else
+ state->master_clk = 61333;
+
+}
+
+static int signal_det(struct mb86a16_state *state,
+ int smrt,
+ unsigned char *SIG)
+{
+
+ int ret ;
+ int smrtd ;
+ int wait_sym ;
+
+ u32 wait_t;
+ unsigned char S[3] ;
+ int i ;
+
+ if (*SIG > 45) {
+ if (CNTM_set(state, 2, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 40000;
+ } else {
+ if (CNTM_set(state, 3, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 80000;
+ }
+ for (i = 0; i < 3; i++) {
+ if (i == 0)
+ smrtd = smrt * 98 / 100;
+ else if (i == 1)
+ smrtd = smrt;
+ else
+ smrtd = smrt * 102 / 100;
+ smrt_info_get(state, smrtd);
+ smrt_set(state, smrtd);
+ srst(state);
+ wait_t = (wait_sym + 99 * smrtd / 100) / smrtd;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(10);
+ if (mb86a16_read(state, 0x37, &(S[i])) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ }
+ if ((S[1] > S[0] * 112 / 100) &&
+ (S[1] > S[2] * 112 / 100)) {
+
+ ret = 1;
+ } else {
+ ret = 0;
+ }
+ *SIG = S[1];
+
+ if (CNTM_set(state, 0, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+
+ return ret;
+}
+
+static int rf_val_set(struct mb86a16_state *state,
+ int f,
+ int smrt,
+ unsigned char R)
+{
+ unsigned char C, F, B;
+ int M;
+ unsigned char rf_val[5];
+ int ack = -1;
+
+ if (smrt > 37750)
+ C = 1;
+ else if (smrt > 18875)
+ C = 2;
+ else if (smrt > 5500)
+ C = 3;
+ else
+ C = 4;
+
+ if (smrt > 30500)
+ F = 3;
+ else if (smrt > 9375)
+ F = 1;
+ else if (smrt > 4625)
+ F = 0;
+ else
+ F = 2;
+
+ if (f < 1060)
+ B = 0;
+ else if (f < 1175)
+ B = 1;
+ else if (f < 1305)
+ B = 2;
+ else if (f < 1435)
+ B = 3;
+ else if (f < 1570)
+ B = 4;
+ else if (f < 1715)
+ B = 5;
+ else if (f < 1845)
+ B = 6;
+ else if (f < 1980)
+ B = 7;
+ else if (f < 2080)
+ B = 8;
+ else
+ B = 9;
+
+ M = f * (1 << R) / 2;
+
+ rf_val[0] = 0x01 | (C << 3) | (F << 1);
+ rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12);
+ rf_val[2] = (M & 0x00ff0) >> 4;
+ rf_val[3] = ((M & 0x0000f) << 4) | B;
+
+ /* Frequency Set */
+ if (mb86a16_write(state, 0x21, rf_val[0]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x22, rf_val[1]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x23, rf_val[2]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x24, rf_val[3]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x25, 0x01) < 0)
+ ack = 0;
+ if (ack == 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int afcerr_chk(struct mb86a16_state *state)
+{
+ unsigned char AFCM_L, AFCM_H ;
+ int AFCM ;
+ int afcm, afcerr ;
+
+ if (mb86a16_read(state, 0x0e, &AFCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCM_H) != 2)
+ goto err;
+
+ AFCM = (AFCM_H << 8) + AFCM_L;
+
+ if (AFCM > 2048)
+ afcm = AFCM - 4096;
+ else
+ afcm = AFCM;
+ afcerr = afcm * state->master_clk / 8192;
+
+ return afcerr;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int dagcm_val_get(struct mb86a16_state *state)
+{
+ int DAGCM;
+ unsigned char DAGCM_H, DAGCM_L;
+
+ if (mb86a16_read(state, 0x45, &DAGCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x46, &DAGCM_H) != 2)
+ goto err;
+
+ DAGCM = (DAGCM_H << 8) + DAGCM_L;
+
+ return DAGCM;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ u8 stat, stat2;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *status = 0;
+
+ if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2)
+ goto err;
+ if ((stat > 25) && (stat2 > 25))
+ *status |= FE_HAS_SIGNAL;
+ if ((stat > 45) && (stat2 > 45))
+ *status |= FE_HAS_CARRIER;
+
+ if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2)
+ goto err;
+
+ if (stat & 0x01)
+ *status |= FE_HAS_SYNC;
+ if (stat & 0x01)
+ *status |= FE_HAS_VITERBI;
+
+ if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2)
+ goto err;
+
+ if ((stat & 0x0f) && (*status & FE_HAS_VITERBI))
+ *status |= FE_HAS_LOCK;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int sync_chk(struct mb86a16_state *state,
+ unsigned char *VIRM)
+{
+ unsigned char val;
+ int sync;
+
+ if (mb86a16_read(state, 0x0d, &val) != 2)
+ goto err;
+
+ dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
+ sync = val & 0x01;
+ *VIRM = (val & 0x1c) >> 2;
+
+ return sync;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int freqerr_chk(struct mb86a16_state *state,
+ int fTP,
+ int smrt,
+ int unit)
+{
+ unsigned char CRM, AFCML, AFCMH;
+ unsigned char temp1, temp2, temp3;
+ int crm, afcm, AFCM;
+ int crrerr, afcerr; /* kHz */
+ int frqerr; /* MHz */
+ int afcen, afcexen = 0;
+ int R, M, fOSC, fOSC_OFS;
+
+ if (mb86a16_read(state, 0x43, &CRM) != 2)
+ goto err;
+
+ if (CRM > 127)
+ crm = CRM - 256;
+ else
+ crm = CRM;
+
+ crrerr = smrt * crm / 256;
+ if (mb86a16_read(state, 0x49, &temp1) != 2)
+ goto err;
+
+ afcen = (temp1 & 0x04) >> 2;
+ if (afcen == 0) {
+ if (mb86a16_read(state, 0x2a, &temp1) != 2)
+ goto err;
+ afcexen = (temp1 & 0x20) >> 5;
+ }
+
+ if (afcen == 1) {
+ if (mb86a16_read(state, 0x0e, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCMH) != 2)
+ goto err;
+ } else if (afcexen == 1) {
+ if (mb86a16_read(state, 0x2b, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x2c, &AFCMH) != 2)
+ goto err;
+ }
+ if ((afcen == 1) || (afcexen == 1)) {
+ smrt_info_get(state, smrt);
+ AFCM = ((AFCMH & 0x01) << 8) + AFCML;
+ if (AFCM > 255)
+ afcm = AFCM - 512;
+ else
+ afcm = AFCM;
+
+ afcerr = afcm * state->master_clk / 8192;
+ } else
+ afcerr = 0;
+
+ if (mb86a16_read(state, 0x22, &temp1) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x23, &temp2) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x24, &temp3) != 2)
+ goto err;
+
+ R = (temp1 & 0xe0) >> 5;
+ M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4);
+ if (R == 0)
+ fOSC = 2 * M;
+ else
+ fOSC = M;
+
+ fOSC_OFS = fOSC - fTP;
+
+ if (unit == 0) { /* MHz */
+ if (crrerr + afcerr + fOSC_OFS * 1000 >= 0)
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000;
+ else
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000;
+ } else { /* kHz */
+ frqerr = crrerr + afcerr + fOSC_OFS * 1000;
+ }
+
+ return frqerr;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt)
+{
+ unsigned char R;
+
+ if (smrt > 9375)
+ R = 0;
+ else
+ R = 1;
+
+ return R;
+}
+
+static void swp_info_get(struct mb86a16_state *state,
+ int fOSC_start,
+ int smrt,
+ int v, int R,
+ int swp_ofs,
+ int *fOSC,
+ int *afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+ int crnt_swp_freq ;
+
+ crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs;
+
+ if (R == 0)
+ *fOSC = (crnt_swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (crnt_swp_freq + 500) / 1000;
+
+ if (*fOSC >= crnt_swp_freq)
+ *afcex_freq = *fOSC * 1000 - crnt_swp_freq;
+ else
+ *afcex_freq = crnt_swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+
+static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin,
+ int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1)
+{
+ int swp_freq ;
+
+ if ((i % 2 == 1) && (v <= vmax)) {
+ /* positive v (case 1) */
+ if ((v - 1 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 1)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v - 1) > 0) &&
+ (*(V + 30 + v - 2) > 0) &&
+ (*(V + 30 + v - 3) > 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 2) > *(V + 30 + v - 3)) &&
+ ((*(V + 30 + v - 1) > SIGMIN) ||
+ (*(V + 30 + v - 2) > SIGMIN))) {
+ /* (case 3) */
+ if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2;
+ *SIG1 = *(V + 30 + v - 2);
+ }
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 2) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 2)) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v - 2)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v - 1) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v) >= *(V + 30 + v - 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ }
+ } else {
+ swp_freq = -1 ;
+ }
+ } else if ((i % 2 == 0) && (v >= vmin)) {
+ /* Negative v (case 1) */
+ if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else if ((v + 1 == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v);
+ } else if ((v == vmin) &&
+ (*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 1)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 3) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 3)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v + 1) > SIGMIN))) {
+ /* (case 5) */
+ if (*(V + 30 + v) >= *(V + 30 + v + 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ }
+ } else if ((v + 2 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 6) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) {
+ swp_freq = fOSC * 1000;
+ *SIG1 = *(V + 30 + v);
+ } else
+ swp_freq = -1;
+ } else
+ swp_freq = -1;
+
+ return swp_freq;
+}
+
+static void swp_info_get2(struct mb86a16_state *state,
+ int smrt,
+ int R,
+ int swp_freq,
+ int *afcex_freq,
+ int *fOSC,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ if (R == 0)
+ *fOSC = (swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (swp_freq + 500) / 1000;
+
+ if (*fOSC >= swp_freq)
+ *afcex_freq = *fOSC * 1000 - swp_freq;
+ else
+ *afcex_freq = swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static void afcex_info_get(struct mb86a16_state *state,
+ int afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ AFCEX = afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static int SEQ_set(struct mb86a16_state *state, unsigned char loop)
+{
+ /* SLOCK0 = 0 */
+ if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV)
+{
+ /* Viterbi Rate, IQ Settings */
+ if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int FEC_srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S2T_set(struct mb86a16_state *state, unsigned char S2T)
+{
+ if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T)
+{
+ if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+
+static int mb86a16_set_fe(struct mb86a16_state *state)
+{
+ u8 agcval, cnmval;
+
+ int i, j;
+ int fOSC = 0;
+ int fOSC_start = 0;
+ int wait_t;
+ int fcp;
+ int swp_ofs;
+ int V[60];
+ u8 SIG1MIN;
+
+ unsigned char CREN, AFCEN, AFCEXEN;
+ unsigned char SIG1;
+ unsigned char TIMINT1, TIMINT2, TIMEXT;
+ unsigned char S0T, S1T;
+ unsigned char S2T;
+/* unsigned char S2T, S3T; */
+ unsigned char S4T, S5T;
+ unsigned char AFCEX_L, AFCEX_H;
+ unsigned char R;
+ unsigned char VIRM;
+ unsigned char ETH, VIA;
+ unsigned char junk;
+
+ int loop;
+ int ftemp;
+ int v, vmax, vmin;
+ int vmax_his, vmin_his;
+ int swp_freq, prev_swp_freq[20];
+ int prev_freq_num;
+ int signal_dupl;
+ int afcex_freq;
+ int signal;
+ int afcerr;
+ int temp_freq, delta_freq;
+ int dagcm[4];
+ int smrt_d;
+/* int freq_err; */
+ int n;
+ int ret = -1;
+ int sync;
+
+ dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
+
+ fcp = 3000;
+ swp_ofs = state->srate / 4;
+
+ for (i = 0; i < 60; i++)
+ V[i] = -1;
+
+ for (i = 0; i < 20; i++)
+ prev_swp_freq[i] = 0;
+
+ SIG1MIN = 25;
+
+ for (n = 0; ((n < 3) && (ret == -1)); n++) {
+ SEQ_set(state, 0);
+ iq_vt_set(state, 0);
+
+ CREN = 0;
+ AFCEN = 0;
+ AFCEXEN = 1;
+ TIMINT1 = 0;
+ TIMINT2 = 1;
+ TIMEXT = 2;
+ S1T = 0;
+ S0T = 0;
+
+ if (initial_set(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
+ return -1;
+ }
+ if (DAGC_data_set(state, 3, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1; /* (0, 0) */
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1; /* (1, smrt) = (1, symbolrate) */
+ }
+ if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
+ return -1; /* (0, 1, 2) */
+ }
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1; /* (0, 0) */
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
+ return -1;
+ }
+
+ R = vco_dev_get(state, state->srate);
+ if (R == 1)
+ fOSC_start = state->frequency;
+
+ else if (R == 0) {
+ if (state->frequency % 2 == 0) {
+ fOSC_start = state->frequency;
+ } else {
+ fOSC_start = state->frequency + 1;
+ if (fOSC_start > 2150)
+ fOSC_start = state->frequency - 1;
+ }
+ }
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmax = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp + swp_ofs;
+ vmax++;
+
+ /* Upper bound */
+ if (ftemp > 2150000) {
+ loop = 0;
+ vmax--;
+ } else {
+ if ((ftemp == 2150000) ||
+ (ftemp - state->frequency * 1000 >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmin = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp - swp_ofs;
+ vmin--;
+
+ /* Lower bound */
+ if (ftemp < 950000) {
+ loop = 0;
+ vmin++;
+ } else {
+ if ((ftemp == 950000) ||
+ (state->frequency * 1000 - ftemp >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ wait_t = (8000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+
+ i = 0;
+ j = 0;
+ prev_freq_num = 0;
+ loop = 1;
+ signal = 0;
+ vmax_his = 0;
+ vmin_his = 0;
+ v = 0;
+
+ while (loop == 1) {
+ swp_info_get(state, fOSC_start, state->srate,
+ v, R, swp_ofs, &fOSC,
+ &afcex_freq, &AFCEX_L, &AFCEX_H);
+
+ udelay(100);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ udelay(100);
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ msleep_interruptible(wait_t);
+
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+ }
+ V[30 + v] = SIG1 ;
+ swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin,
+ SIG1MIN, fOSC, afcex_freq,
+ swp_ofs, &SIG1); /* changed */
+
+ signal_dupl = 0;
+ for (j = 0; j < prev_freq_num; j++) {
+ if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) {
+ signal_dupl = 1;
+ dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
+ }
+ }
+ if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
+ dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
+ prev_swp_freq[prev_freq_num] = swp_freq;
+ prev_freq_num++;
+ swp_info_get2(state, state->srate, R, swp_freq,
+ &afcex_freq, &fOSC,
+ &AFCEX_L, &AFCEX_H);
+
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ signal = signal_det(state, state->srate, &SIG1);
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
+ loop = 0;
+ } else {
+ dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ }
+ }
+ if (v > vmax)
+ vmax_his = 1 ;
+ if (v < vmin)
+ vmin_his = 1 ;
+ i++;
+
+ if ((i % 2 == 1) && (vmax_his == 1))
+ i++;
+ if ((i % 2 == 0) && (vmin_his == 1))
+ i++;
+
+ if (i % 2 == 1)
+ v = (i + 1) / 2;
+ else
+ v = -i / 2;
+
+ if ((vmax_his == 1) && (vmin_his == 1))
+ loop = 0 ;
+ }
+
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
+ S1T = 7 ;
+ S0T = 1 ;
+ CREN = 0 ;
+ AFCEN = 1 ;
+ AFCEXEN = 0 ;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H);
+ if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ /* delay 4~200 */
+ wait_t = 200000 / state->master_clk + 200000 / state->srate;
+ msleep(wait_t);
+ afcerr = afcerr_chk(state);
+ if (afcerr == -1)
+ return -1;
+
+ swp_freq = fOSC * 1000 + afcerr ;
+ AFCEXEN = 1 ;
+ if (state->srate >= 1500)
+ smrt_d = state->srate / 3;
+ else
+ smrt_d = state->srate / 2;
+ smrt_info_get(state, smrt_d);
+ if (smrt_set(state, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ R = vco_dev_get(state, smrt_d);
+ if (DAGC_data_set(state, 2, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ for (i = 0; i < 3; i++) {
+ temp_freq = swp_freq + (i - 1) * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[i] = dagcm_val_get(state);
+ }
+ if ((dagcm[0] > dagcm[1]) &&
+ (dagcm[0] > dagcm[2]) &&
+ (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) {
+
+ temp_freq = swp_freq - 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300;
+ else
+ delta_freq = 0;
+ } else if ((dagcm[2] > dagcm[1]) &&
+ (dagcm[2] > dagcm[0]) &&
+ (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) {
+
+ temp_freq = swp_freq + 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300;
+ else
+ delta_freq = 0 ;
+
+ } else {
+ delta_freq = 0 ;
+ }
+ dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
+ swp_freq += delta_freq;
+ dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
+ if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !");
+ } else {
+
+ S1T = 0;
+ S0T = 3;
+ CREN = 1;
+ AFCEN = 0;
+ AFCEXEN = 1;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ if (DAGC_data_set(state, 0, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ R = vco_dev_get(state, state->srate);
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ wait_t = 7 + (10000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(wait_t);
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ if (SIG1 > 110) {
+ S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6;
+ wait_t = 7 + (917504 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 105) {
+ S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1048576 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 85) {
+ S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1310720 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 65) {
+ S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1572864 + state->srate / 2) / state->srate;
+ } else {
+ S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (2097152 + state->srate / 2) / state->srate;
+ }
+ wait_t *= 2; /* FOS */
+ S2T_set(state, S2T);
+ S45T_set(state, S4T, S5T);
+ Vi_set(state, ETH, VIA);
+ srst(state);
+ msleep_interruptible(wait_t);
+ sync = sync_chk(state, &VIRM);
+ dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
+ if (VIRM) {
+ if (VIRM == 4) {
+ /* 5/6 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ if (state->srate < 5000)
+ /* FIXME ! , should be a long wait ! */
+ msleep_interruptible(wait_t);
+ else
+ msleep_interruptible(wait_t);
+
+ if (sync_chk(state, &junk) == 0) {
+ iq_vt_set(state, 1);
+ FEC_srst(state);
+ }
+ }
+ /* 1/2, 2/3, 3/4, 7/8 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ msleep_interruptible(wait_t);
+ SEQ_set(state, 1);
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC");
+ SEQ_set(state, 1);
+ ret = -1;
+ }
+ }
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL");
+ ret = -1;
+ }
+
+ sync = sync_chk(state, &junk);
+ if (sync) {
+ dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
+ freqerr_chk(state, state->frequency, state->srate, 1);
+ ret = 0;
+ break;
+ }
+ }
+
+ mb86a16_read(state, 0x15, &agcval);
+ mb86a16_read(state, 0x26, &cnmval);
+ dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
+
+ return ret;
+}
+
+static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i;
+ u8 regs;
+
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+
+ regs = 0x18;
+
+ if (cmd->msg_len > 5 || cmd->msg_len < 4)
+ return -EINVAL;
+
+ for (i = 0; i < cmd->msg_len; i++) {
+ if (mb86a16_write(state, regs, cmd->msg[i]) < 0)
+ goto err;
+
+ regs++;
+ }
+ i += 0x90;
+
+ msleep_interruptible(10);
+
+ if (mb86a16_write(state, MB86A16_DCC1, i) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (burst) {
+ case SEC_MINI_A:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN |
+ MB86A16_DCC1_TBO) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_MINI_B:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ }
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_CTOE) < 0)
+
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_TONE_OFF:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ state->frequency = p->frequency / 1000;
+ state->srate = p->u.qpsk.symbol_rate / 1000;
+
+ if (!mb86a16_set_fe(state)) {
+ dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+ return DVBFE_ALGO_SEARCH_SUCCESS;
+ }
+
+ dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
+ return DVBFE_ALGO_SEARCH_FAILED;
+}
+
+static void mb86a16_release(struct dvb_frontend *fe)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static int mb86a16_init(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst;
+ u32 timer;
+
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *ber = 0;
+ if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2)
+ goto err;
+ /* BER monitor invalid when BER_EN = 0 */
+ if (ber_mon & 0x04) {
+ /* coarse, fast calculation */
+ *ber = ber_tab & 0x1f;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
+ if (ber_mon & 0x01) {
+ /*
+ * BER_SEL = 1, The monitored BER is the estimated
+ * value with a Reed-Solomon decoder error amount at
+ * the deinterleaver output.
+ * monitored BER is expressed as a 20 bit output in total
+ */
+ ber_rst = ber_mon >> 3;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_rst == 0)
+ timer = 12500000;
+ if (ber_rst == 1)
+ timer = 25000000;
+ if (ber_rst == 2)
+ timer = 50000000;
+ if (ber_rst == 3)
+ timer = 100000000;
+
+ *ber /= timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ } else {
+ /*
+ * BER_SEL = 0, The monitored BER is the estimated
+ * value with a Viterbi decoder error amount at the
+ * QPSK demodulator output.
+ * monitored BER is expressed as a 24 bit output in total
+ */
+ ber_tim = ber_mon >> 1;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_tim == 0)
+ timer = 16;
+ if (ber_tim == 1)
+ timer = 24;
+
+ *ber /= 2 ^ timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ }
+ }
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ u8 agcm = 0;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *strength = 0;
+ if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ *strength = ((0xff - agcm) * 100) / 256;
+ dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
+ *strength = (0xffff - 0xff) + agcm;
+
+ return 0;
+}
+
+struct cnr {
+ u8 cn_reg;
+ u8 cn_val;
+};
+
+static const struct cnr cnr_tab[] = {
+ { 35, 2 },
+ { 40, 3 },
+ { 50, 4 },
+ { 60, 5 },
+ { 70, 6 },
+ { 80, 7 },
+ { 92, 8 },
+ { 103, 9 },
+ { 115, 10 },
+ { 138, 12 },
+ { 162, 15 },
+ { 180, 18 },
+ { 185, 19 },
+ { 189, 20 },
+ { 195, 22 },
+ { 199, 24 },
+ { 201, 25 },
+ { 202, 26 },
+ { 203, 27 },
+ { 205, 28 },
+ { 208, 30 }
+};
+
+static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i = 0;
+ int low_tide = 2, high_tide = 30, q_level;
+ u8 cn;
+
+ *snr = 0;
+ if (mb86a16_read(state, 0x26, &cn) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) {
+ if (cn < cnr_tab[i].cn_reg) {
+ *snr = cnr_tab[i].cn_val;
+ break;
+ }
+ }
+ q_level = (*snr * 100) / (high_tide - low_tide);
+ dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
+ *snr = (0xffff - 0xff) + *snr;
+
+ return 0;
+}
+
+static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ u8 dist;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ *ucblocks = dist;
+
+ return 0;
+}
+
+static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe)
+{
+ return DVBFE_ALGO_CUSTOM;
+}
+
+static struct dvb_frontend_ops mb86a16_ops = {
+ .info = {
+ .name = "Fujitsu MB86A16 DVB-S",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 3000,
+ .frequency_tolerance = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 500,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 | FE_CAN_QPSK |
+ FE_CAN_FEC_AUTO
+ },
+ .release = mb86a16_release,
+
+ .get_frontend_algo = mb86a16_frontend_algo,
+ .search = mb86a16_search,
+ .read_status = mb86a16_read_status,
+ .init = mb86a16_init,
+ .sleep = mb86a16_sleep,
+ .read_status = mb86a16_read_status,
+
+ .read_ber = mb86a16_read_ber,
+ .read_signal_strength = mb86a16_read_signal_strength,
+ .read_snr = mb86a16_read_snr,
+ .read_ucblocks = mb86a16_read_ucblocks,
+
+ .diseqc_send_master_cmd = mb86a16_send_diseqc_msg,
+ .diseqc_send_burst = mb86a16_send_diseqc_burst,
+ .set_tone = mb86a16_set_tone,
+};
+
+struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ u8 dev_id = 0;
+ struct mb86a16_state *state = NULL;
+
+ state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ state->config = config;
+ state->i2c_adap = i2c_adap;
+
+ mb86a16_read(state, 0x7f, &dev_id);
+ if (dev_id != 0xfe)
+ goto error;
+
+ memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ state->frontend.ops.set_voltage = state->config->set_voltage;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(mb86a16_attach);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Manu Abraham");
diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h
new file mode 100644
index 0000000..6ea8c37
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.h
@@ -0,0 +1,52 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_H
+#define __MB86A16_H
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
+
+struct mb86a16_config {
+ u8 demod_address;
+
+ int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+};
+
+
+
+#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap);
+
+#else
+
+static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_MB86A16 */
+
+#endif /* __MB86A16_H */
diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h
new file mode 100644
index 0000000..360a35a
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16_priv.h
@@ -0,0 +1,151 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_PRIV_H
+#define __MB86A16_PRIV_H
+
+#define MB86A16_TSOUT 0x00
+#define MB86A16_TSOUT_HIZSEL (0x01 << 5)
+#define MB86A16_TSOUT_HIZCNTI (0x01 << 4)
+#define MB86A16_TSOUT_MODE (0x01 << 3)
+#define MB86A16_TSOUT_ORDER (0x01 << 2)
+#define MB86A16_TSOUT_ERROR (0x01 << 1)
+#define Mb86A16_TSOUT_EDGE (0x01 << 0)
+
+#define MB86A16_FEC 0x01
+#define MB86A16_FEC_FSYNC (0x01 << 5)
+#define MB86A16_FEC_PCKB8 (0x01 << 4)
+#define MB86A16_FEC_DVDS (0x01 << 3)
+#define MB86A16_FEC_EREN (0x01 << 2)
+#define Mb86A16_FEC_RSEN (0x01 << 1)
+#define MB86A16_FEC_DIEN (0x01 << 0)
+
+#define MB86A16_AGC 0x02
+#define MB86A16_AGC_AGMD (0x01 << 6)
+#define MB86A16_AGC_AGCW (0x0f << 2)
+#define MB86A16_AGC_AGCP (0x01 << 1)
+#define MB86A16_AGC_AGCR (0x01 << 0)
+
+#define MB86A16_SRATE1 0x03
+#define MB86A16_SRATE1_DECI (0x07 << 2)
+#define MB86A16_SRATE1_CSEL (0x01 << 1)
+#define MB86A16_SRATE1_RSEL (0x01 << 0)
+
+#define MB86A16_SRATE2 0x04
+#define MB86A16_SRATE2_STOFSL (0xff << 0)
+
+#define MB86A16_SRATE3 0x05
+#define MB86A16_SRATE2_STOFSH (0xff << 0)
+
+#define MB86A16_VITERBI 0x06
+#define MB86A16_FRAMESYNC 0x07
+#define MB86A16_CRLFILTCOEF1 0x08
+#define MB86A16_CRLFILTCOEF2 0x09
+#define MB86A16_STRFILTCOEF1 0x0a
+#define MB86A16_STRFILTCOEF2 0x0b
+#define MB86A16_RESET 0x0c
+#define MB86A16_STATUS 0x0d
+#define MB86A16_AFCML 0x0e
+#define MB86A16_AFCMH 0x0f
+#define MB86A16_BERMON 0x10
+#define MB86A16_BERTAB 0x11
+#define MB86A16_BERLSB 0x12
+#define MB86A16_BERMID 0x13
+#define MB86A16_BERMSB 0x14
+#define MB86A16_AGCM 0x15
+
+#define MB86A16_DCC1 0x16
+#define MB86A16_DCC1_DISTA (0x01 << 7)
+#define MB86A16_DCC1_PRTY (0x01 << 6)
+#define MB86A16_DCC1_CTOE (0x01 << 5)
+#define MB86A16_DCC1_TBEN (0x01 << 4)
+#define MB86A16_DCC1_TBO (0x01 << 3)
+#define MB86A16_DCC1_NUM (0x07 << 0)
+
+#define MB86A16_DCC2 0x17
+#define MB86A16_DCC2_DCBST (0x01 << 0)
+
+#define MB86A16_DCC3 0x18
+#define MB86A16_DCC3_CODE0 (0xff << 0)
+
+#define MB86A16_DCC4 0x19
+#define MB86A16_DCC4_CODE1 (0xff << 0)
+
+#define MB86A16_DCC5 0x1a
+#define MB86A16_DCC5_CODE2 (0xff << 0)
+
+#define MB86A16_DCC6 0x1b
+#define MB86A16_DCC6_CODE3 (0xff << 0)
+
+#define MB86A16_DCC7 0x1c
+#define MB86A16_DCC7_CODE4 (0xff << 0)
+
+#define MB86A16_DCC8 0x1d
+#define MB86A16_DCC8_CODE5 (0xff << 0)
+
+#define MB86A16_DCCOUT 0x1e
+#define MB86A16_DCCOUT_DISEN (0x01 << 0)
+
+#define MB86A16_TONEOUT1 0x1f
+#define MB86A16_TONE_TDIVL (0xff << 0)
+
+#define MB86A16_TONEOUT2 0x20
+#define MB86A16_TONE_TMD (0x03 << 2)
+#define MB86A16_TONE_TDIVH (0x03 << 0)
+
+#define MB86A16_FREQ1 0x21
+#define MB86A16_FREQ2 0x22
+#define MB86A16_FREQ3 0x23
+#define MB86A16_FREQ4 0x24
+#define MB86A16_FREQSET 0x25
+#define MB86A16_CNM 0x26
+#define MB86A16_PORT0 0x27
+#define MB86A16_PORT1 0x28
+#define MB86A16_DRCFILT 0x29
+#define MB86A16_AFC 0x2a
+#define MB86A16_AFCEXL 0x2b
+#define MB86A16_AFCEXH 0x2c
+#define MB86A16_DAGC 0x2d
+#define MB86A16_SEQMODE 0x32
+#define MB86A16_S0S1T 0x33
+#define MB86A16_S2S3T 0x34
+#define MB86A16_S4S5T 0x35
+#define MB86A16_CNTMR 0x36
+#define MB86A16_SIG1 0x37
+#define MB86A16_SIG2 0x38
+#define MB86A16_VIMAG 0x39
+#define MB86A16_VISET1 0x3a
+#define MB86A16_VISET2 0x3b
+#define MB86A16_VISET3 0x3c
+#define MB86A16_FAGCS1 0x3d
+#define MB86A16_FAGCS2 0x3e
+#define MB86A16_FAGCS3 0x3f
+#define MB86A16_FAGCS4 0x40
+#define MB86A16_FAGCS5 0x41
+#define MB86A16_FAGCS6 0x42
+#define MB86A16_CRM 0x43
+#define MB86A16_STRM 0x44
+#define MB86A16_DAGCML 0x45
+#define MB86A16_DAGCMH 0x46
+#define MB86A16_QPSKTST 0x49
+#define MB86A16_DISTMON 0x52
+#define MB86A16_VERSION 0x7f
+
+#endif /* __MB86A16_PRIV_H */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 6c1dbf9..6ca533e 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -426,6 +426,10 @@
id = tda10021_readreg(state, 0x1a);
if ((id & 0xf0) != 0x70) goto error;
+ /* Don't claim TDA10023 */
+ if (id == 0x7d)
+ goto error;
+
printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
state->config->demod_address, id);
diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c
new file mode 100644
index 0000000..87d5273
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.c
@@ -0,0 +1,257 @@
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "dvb_frontend.h"
+#include "tda665x.h"
+
+struct tda665x_state {
+ struct dvb_frontend *fe;
+ struct i2c_adapter *i2c;
+ const struct tda665x_config *config;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int tda665x_read(struct tda665x_state *state, u8 *buf)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_get_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ int err = 0;
+
+ switch (param) {
+ case DVBFE_TUNER_FREQUENCY:
+ tstate->frequency = state->frequency;
+ break;
+ case DVBFE_TUNER_BANDWIDTH:
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ u8 result = 0;
+ int err = 0;
+
+ *status = 0;
+
+ err = tda665x_read(state, &result);
+ if (err < 0)
+ goto exit;
+
+ if ((result >> 6) & 0x01) {
+ printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
+ *status = 1;
+ }
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_set_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ const struct tda665x_config *config = state->config;
+ u32 frequency, status = 0;
+ u8 buf[4];
+ int err = 0;
+
+ if (param & DVBFE_TUNER_FREQUENCY) {
+
+ frequency = tstate->frequency;
+ if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
+ printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
+ return -EINVAL;
+ }
+
+ frequency += config->frequency_offst;
+ frequency *= config->ref_multiplier;
+ frequency += config->ref_divider >> 1;
+ frequency /= config->ref_divider;
+
+ buf[0] = (u8) (frequency & 0x7f00) >> 8;
+ buf[1] = (u8) (frequency & 0x00ff) >> 0;
+ buf[2] = 0x80 | 0x40 | 0x02;
+ buf[3] = 0x00;
+
+ /* restore frequency */
+ frequency = tstate->frequency;
+
+ if (frequency < 153000000) {
+ /* VHF-L */
+ buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
+ if (frequency < 68000000)
+ buf[3] |= 0x40; /* 83uA */
+ if (frequency < 1040000000)
+ buf[3] |= 0x60; /* 122uA */
+ if (frequency < 1250000000)
+ buf[3] |= 0x80; /* 163uA */
+ else
+ buf[3] |= 0xa0; /* 254uA */
+ } else if (frequency < 438000000) {
+ /* VHF-H */
+ buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
+ if (frequency < 230000000)
+ buf[3] |= 0x40;
+ if (frequency < 300000000)
+ buf[3] |= 0x60;
+ else
+ buf[3] |= 0x80;
+ } else {
+ /* UHF */
+ buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
+ if (frequency < 470000000)
+ buf[3] |= 0x60;
+ if (frequency < 526000000)
+ buf[3] |= 0x80;
+ else
+ buf[3] |= 0xa0;
+ }
+
+ /* Set params */
+ err = tda665x_write(state, buf, 5);
+ if (err < 0)
+ goto exit;
+
+ /* sleep for some time */
+ printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
+ msleep(20);
+ /* check status */
+ err = tda665x_get_status(fe, &status);
+ if (err < 0)
+ goto exit;
+
+ if (status == 1) {
+ printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
+ state->frequency = frequency; /* cache successful state */
+ } else {
+ printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
+ }
+ } else {
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ return -EINVAL;
+ }
+
+ return 0;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_release(struct dvb_frontend *fe)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+
+ fe->tuner_priv = NULL;
+ kfree(state);
+ return 0;
+}
+
+static struct dvb_tuner_ops tda665x_ops = {
+
+ .set_state = tda665x_set_state,
+ .get_state = tda665x_get_state,
+ .get_status = tda665x_get_status,
+ .release = tda665x_release
+};
+
+struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct tda665x_state *state = NULL;
+ struct dvb_tuner_info *info;
+
+ state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL);
+ if (state == NULL)
+ goto exit;
+
+ state->config = config;
+ state->i2c = i2c;
+ state->fe = fe;
+ fe->tuner_priv = state;
+ fe->ops.tuner_ops = tda665x_ops;
+ info = &fe->ops.tuner_ops.info;
+
+ memcpy(info->name, config->name, sizeof(config->name));
+ info->frequency_min = config->frequency_min;
+ info->frequency_max = config->frequency_max;
+ info->frequency_step = config->frequency_offst;
+
+ printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
+
+ return fe;
+
+exit:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(tda665x_attach);
+
+MODULE_DESCRIPTION("TDA665x driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h
new file mode 100644
index 0000000..ec7927a
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.h
@@ -0,0 +1,52 @@
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TDA665x_H
+#define __TDA665x_H
+
+struct tda665x_config {
+ char name[128];
+
+ u8 addr;
+ u32 frequency_min;
+ u32 frequency_max;
+ u32 frequency_offst;
+ u32 ref_multiplier;
+ u32 ref_divider;
+};
+
+#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c);
+
+#else
+
+static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_TDA665x */
+
+#endif /* __TDA665x_H */
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
new file mode 100644
index 0000000..f7b72a3
--- /dev/null
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -0,0 +1,32 @@
+config MANTIS_CORE
+ tristate "Mantis/Hopper PCI bridge based devices"
+ depends on PCI && I2C && INPUT
+
+ help
+ Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_MANTIS
+ tristate "MANTIS based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_MB86A16
+ select DVB_ZL10353
+ select DVB_STV0299
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Mantis PCI bridge.
+ Say Y when you have a Mantis based DVB card and want to use it.
+
+ If unsure say N.
+
+config DVB_HOPPER
+ tristate "HOPPER based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_ZL10353
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Hopper PCI bridge.
+ Say Y when you have a Hopper based DVB card and want to use it.
+
+ If unsure say N
diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile
new file mode 100644
index 0000000..98dc5cd
--- /dev/null
+++ b/drivers/media/dvb/mantis/Makefile
@@ -0,0 +1,28 @@
+mantis_core-objs := mantis_ioc.o \
+ mantis_uart.o \
+ mantis_dma.o \
+ mantis_pci.o \
+ mantis_i2c.o \
+ mantis_dvb.o \
+ mantis_evm.o \
+ mantis_hif.o \
+ mantis_ca.o \
+ mantis_pcmcia.o \
+ mantis_input.o
+
+mantis-objs := mantis_cards.o \
+ mantis_vp1033.o \
+ mantis_vp1034.o \
+ mantis_vp1041.o \
+ mantis_vp2033.o \
+ mantis_vp2040.o \
+ mantis_vp3030.o
+
+hopper-objs := hopper_cards.o \
+ hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
+obj-$(CONFIG_DVB_MANTIS) += mantis.o
+obj-$(CONFIG_DVB_HOPPER) += hopper.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
new file mode 100644
index 0000000..d073c61
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -0,0 +1,275 @@
+/*
+ Hopper PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+#define DRIVER_NAME "Hopper"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &hopper_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+ { }
+};
+
+static struct pci_driver hopper_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = hopper_pci_table,
+ .probe = hopper_pci_probe,
+ .remove = hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+ return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+ return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
new file mode 100644
index 0000000..96674c7
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -0,0 +1,88 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+ if (!fe)
+ return -1;
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3028_frontend_init,
+ .power = GPIF_A00,
+ .reset = GPIF_A03,
+};
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h
new file mode 100644
index 0000000..5723949
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.h
@@ -0,0 +1,30 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c
new file mode 100644
index 0000000..403ce04
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.c
@@ -0,0 +1,207 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
+
+static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_mem(ca, addr);
+}
+
+static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_mem(ca, addr, data);
+}
+
+static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_iom(ca, addr);
+}
+
+static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_iom(ca, addr, data);
+}
+
+static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+ udelay(500); /* Wait.. */
+ mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
+ udelay(500);
+ mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
+ msleep(1000);
+ dvb_ca_en50221_camready_irq(&ca->en50221, 0);
+
+ return 0;
+}
+
+static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+
+ return 0;
+}
+
+static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
+
+ return 0;
+}
+
+static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
+ }
+
+ return 0;
+}
+
+int mantis_ca_init(struct mantis_pci *mantis)
+{
+ struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
+ struct mantis_ca *ca;
+ int ca_flags = 0, result;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+ ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
+ if (!ca) {
+ dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+ result = -ENOMEM;
+ goto err;
+ }
+
+ ca->ca_priv = mantis;
+ mantis->mantis_ca = ca;
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+ /* register CA interface */
+ ca->en50221.owner = THIS_MODULE;
+ ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
+ ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem;
+ ca->en50221.read_cam_control = mantis_ca_read_cam_ctl;
+ ca->en50221.write_cam_control = mantis_ca_write_cam_ctl;
+ ca->en50221.slot_reset = mantis_ca_slot_reset;
+ ca->en50221.slot_shutdown = mantis_ca_slot_shutdown;
+ ca->en50221.slot_ts_enable = mantis_ts_control;
+ ca->en50221.poll_slot_status = mantis_slot_status;
+ ca->en50221.data = ca;
+
+ mutex_init(&ca->ca_lock);
+
+ init_waitqueue_head(&ca->hif_data_wq);
+ init_waitqueue_head(&ca->hif_opdone_wq);
+ init_waitqueue_head(&ca->hif_write_wq);
+
+ dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+ result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+ if (result != 0) {
+ dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
+ mantis_evmgr_init(ca);
+ return 0;
+err:
+ kfree(ca);
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
+
+void mantis_ca_exit(struct mantis_pci *mantis)
+{
+ struct mantis_ca *ca = mantis->mantis_ca;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
+
+ mantis_evmgr_exit(ca);
+ dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+ if (ca)
+ dvb_ca_en50221_release(&ca->en50221);
+
+ kfree(ca);
+}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h
new file mode 100644
index 0000000..dc63e55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
new file mode 100644
index 0000000..16f1708
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -0,0 +1,305 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static int devs;
+
+#define DRIVER_NAME "Mantis"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &mantis_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
+ goto fail6;
+ }
+
+ devs++;
+
+ return err;
+
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
+ mantis_uart_exit(mantis);
+
+fail6:
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+
+ mantis_uart_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+ MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+ { }
+};
+
+static struct pci_driver mantis_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = mantis_pci_table,
+ .probe = mantis_pci_probe,
+ .remove = mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+ return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+ return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
new file mode 100644
index 0000000..d0b645a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -0,0 +1,179 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_COMMON_H
+#define __MANTIS_COMMON_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "mantis_uart.h"
+
+#include "mantis_link.h"
+
+#define MANTIS_ERROR 0
+#define MANTIS_NOTICE 1
+#define MANTIS_INFO 2
+#define MANTIS_DEBUG 3
+#define MANTIS_TMG 9
+
+#define dprintk(y, z, format, arg...) do { \
+ if (z) { \
+ if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
+ printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
+ printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
+ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ } else { \
+ if (mantis->verbose > y) \
+ printk(format , ##arg); \
+ } \
+} while(0)
+
+#define mwrite(dat, addr) writel((dat), addr)
+#define mread(addr) readl(addr)
+
+#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr) mread(mantis->mmio + (addr))
+
+#define MANTIS_TS_188 0
+#define MANTIS_TS_204 1
+
+#define TWINHAN_TECHNOLOGIES 0x1822
+#define MANTIS 0x4e35
+
+#define TECHNISAT 0x1ae4
+#define TERRATEC 0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
+ .vendor = TWINHAN_TECHNOLOGIES, \
+ .device = MANTIS, \
+ .subvendor = (__subven), \
+ .subdevice = (__subdev), \
+ .driver_data = (unsigned long) (__configptr) \
+}
+
+enum mantis_i2c_mode {
+ MANTIS_PAGE_MODE = 0,
+ MANTIS_BYTE_MODE,
+};
+
+struct mantis_pci;
+
+struct mantis_hwconfig {
+ char *model_name;
+ char *dev_type;
+ u32 ts_size;
+
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+ u32 bytes;
+
+ irqreturn_t (*irq_handler)(int irq, void *dev_id);
+ int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+ u8 power;
+ u8 reset;
+
+ enum mantis_i2c_mode i2c_mode;
+};
+
+struct mantis_pci {
+ unsigned int verbose;
+
+ /* PCI stuff */
+ u16 vendor_id;
+ u16 device_id;
+ u16 subsystem_vendor;
+ u16 subsystem_device;
+
+ u8 latency;
+
+ struct pci_dev *pdev;
+
+ unsigned long mantis_addr;
+ void __iomem *mmio;
+
+ u8 irq;
+ u8 revision;
+
+ unsigned int num;
+
+ /* RISC Core */
+ u32 finished_block;
+ u32 last_block;
+ u32 line_bytes;
+ u32 line_count;
+ u32 risc_pos;
+ u8 *buf_cpu;
+ dma_addr_t buf_dma;
+ u32 *risc_cpu;
+ dma_addr_t risc_dma;
+
+ struct tasklet_struct tasklet;
+
+ struct i2c_adapter adapter;
+ int i2c_rc;
+ wait_queue_head_t i2c_wq;
+ struct mutex i2c_lock;
+
+ /* DVB stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend fe_hw;
+ struct dmx_frontend fe_mem;
+ struct dvb_net dvbnet;
+
+ u8 feeds;
+
+ struct mantis_hwconfig *hwconfig;
+
+ u32 mantis_int_stat;
+ u32 mantis_int_mask;
+
+ /* board specific */
+ u8 mac_address[8];
+ u32 sub_vendor_id;
+ u32 sub_device_id;
+
+ /* A12 A13 A14 */
+ u32 gpio_status;
+
+ u32 gpif_status;
+
+ struct mantis_ca *mantis_ca;
+
+ wait_queue_head_t uart_wq;
+ struct work_struct uart_work;
+ spinlock_t uart_lock;
+
+ struct input_dev *rc;
+};
+
+#define MANTIS_HIF_STATUS (mantis->gpio_status)
+
+#endif /* __MANTIS_COMMON_H */
diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c
new file mode 100644
index 0000000..8113b23
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.c
@@ -0,0 +1,238 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_core.h"
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = 1
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .buf = data,
+ .len = length
+ },
+ };
+
+ err = i2c_transfer(&mantis->adapter, msg, 2);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+
+ struct i2c_msg msg = {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = length
+ };
+
+ err = i2c_transfer(&mantis->adapter, &msg, 1);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+ err, length, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int get_mac_address(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis->mac_address[0] = 0x08;
+ err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
+
+ return err;
+ }
+ dprintk(verbose, MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mantis->mac_address[0], mantis->mac_address[1],
+ mantis->mac_address[2], mantis->mac_address[3],
+ mantis->mac_address[4], mantis->mac_address[5]);
+
+ return 0;
+}
+
+#define MANTIS_MODEL_UNKNOWN "UNKNOWN"
+#define MANTIS_DEV_UNKNOWN "UNKNOWN"
+
+struct mantis_hwconfig unknown_device = {
+ .model_name = MANTIS_MODEL_UNKNOWN,
+ .dev_type = MANTIS_DEV_UNKNOWN,
+};
+
+static void mantis_load_config(struct mantis_pci *mantis)
+{
+ switch (mantis->subsystem_device) {
+ case MANTIS_VP_1033_DVB_S: /* VP-1033 */
+ mantis->hwconfig = &vp1033_mantis_config;
+ break;
+ case MANTIS_VP_1034_DVB_S: /* VP-1034 */
+ mantis->hwconfig = &vp1034_mantis_config;
+ break;
+ case MANTIS_VP_1041_DVB_S2: /* VP-1041 */
+ case TECHNISAT_SKYSTAR_HD2:
+ mantis->hwconfig = &vp1041_mantis_config;
+ break;
+ case MANTIS_VP_2033_DVB_C: /* VP-2033 */
+ mantis->hwconfig = &vp2033_mantis_config;
+ break;
+ case MANTIS_VP_2040_DVB_C: /* VP-2040 */
+ case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */
+ case TECHNISAT_CABLESTAR_HD2:
+ mantis->hwconfig = &vp2040_mantis_config;
+ break;
+ case MANTIS_VP_3030_DVB_T: /* VP-3030 */
+ mantis->hwconfig = &vp3030_mantis_config;
+ break;
+ default:
+ mantis->hwconfig = &unknown_device;
+ break;
+ }
+}
+
+int mantis_core_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ mantis_load_config(mantis);
+ dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
+ mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
+ dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->subsystem_vendor, mantis->subsystem_device);
+ dprintk(verbose, MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq, mantis->latency,
+ mantis->mantis_addr, mantis->mantis_mmio);
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
+ return err;
+ }
+ err = get_mac_address(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
+ return err;
+ }
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
+ return err;
+ }
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
+ return err;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
+ return err;
+ }
+
+ return 0;
+}
+
+int mantis_core_exit(struct mantis_pci *mantis)
+{
+ mantis_dma_stop(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
+
+ mantis_uart_exit(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
+
+ if (mantis_dma_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+ if (mantis_dvb_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
+ if (mantis_i2c_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
+
+ return 0;
+}
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+ udelay(100);
+}
+
+/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
+void mantis_set_direction(struct mantis_pci *mantis, int direction)
+{
+ u32 reg;
+
+ reg = mmread(0x28);
+ dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
+ if (direction == 0x01) {
+ /* to CI */
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ } else {
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ }
+}
diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h
new file mode 100644
index 0000000..833ee42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.h
@@ -0,0 +1,57 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CORE_H
+#define __MANTIS_CORE_H
+
+#include "mantis_common.h"
+
+
+#define FE_TYPE_SAT 0
+#define FE_TYPE_CAB 1
+#define FE_TYPE_TER 2
+
+#define FE_TYPE_TS204 0
+#define FE_TYPE_TS188 1
+
+
+struct vendorname {
+ u8 *sub_vendor_name;
+ u32 sub_vendor_id;
+};
+
+struct devicetype {
+ u8 *sub_device_name;
+ u32 sub_device_id;
+ u8 device_type;
+ u32 type_flags;
+};
+
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+extern int mantis_core_init(struct mantis_pci *mantis);
+extern int mantis_core_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CORE_H */
diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c
new file mode 100644
index 0000000..46202a4
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.c
@@ -0,0 +1,256 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
+
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_IRQ (0x01 << 24)
+
+#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
+#define RISC_FLUSH() (mantis->risc_pos = 0)
+#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode))
+
+#define MANTIS_BUF_SIZE (64 * 1024)
+#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4)
+#define MANTIS_BLOCK_COUNT (1 << 4)
+#define MANTIS_RISC_SIZE PAGE_SIZE
+
+int mantis_dma_exit(struct mantis_pci *mantis)
+{
+ if (mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu,
+ MANTIS_BUF_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
+ mantis->buf_cpu, mantis->buf_dma);
+
+ mantis->buf_cpu = NULL;
+ }
+ if (mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu,
+ MANTIS_RISC_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
+ mantis->risc_cpu, mantis->risc_dma);
+
+ mantis->risc_cpu = NULL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
+
+static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
+{
+ if (!mantis->buf_cpu) {
+ mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_BUF_SIZE,
+ &mantis->buf_dma);
+ if (!mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA buffer allocation failed");
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu, MANTIS_BUF_SIZE);
+ }
+ if (!mantis->risc_cpu) {
+ mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_RISC_SIZE,
+ &mantis->risc_dma);
+
+ if (!mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC program allocation failed");
+
+ mantis_dma_exit(mantis);
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu, MANTIS_RISC_SIZE);
+ }
+
+ return 0;
+err:
+ dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
+ return -ENOMEM;
+}
+
+static inline int mantis_calc_lines(struct mantis_pci *mantis)
+{
+ mantis->line_bytes = MANTIS_BLOCK_BYTES;
+ mantis->line_count = MANTIS_BLOCK_COUNT;
+
+ while (mantis->line_bytes > 4095) {
+ mantis->line_bytes >>= 1;
+ mantis->line_count <<= 1;
+ }
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
+ MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
+
+ if (mantis->line_count > 255) {
+ dprintk(MANTIS_ERROR, 1, "Buffer size error");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int mantis_dma_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
+ if (mantis_alloc_buffers(mantis) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
+
+ /* Stop RISC Engine */
+ mmwrite(0, MANTIS_DMA_CTL);
+
+ goto err;
+ }
+ err = mantis_calc_lines(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
+
+ goto err;
+ }
+
+ return 0;
+err:
+ return err;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
+
+static inline void mantis_risc_program(struct mantis_pci *mantis)
+{
+ u32 buf_pos = 0;
+ u32 line;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
+ RISC_FLUSH();
+
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
+ mantis->line_count, mantis->line_bytes);
+
+ for (line = 0; line < mantis->line_count; line++) {
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
+ if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
+ RISC_INSTR(RISC_WRITE |
+ RISC_IRQ |
+ RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) +
+ (MANTIS_BLOCK_COUNT - 1)) %
+ MANTIS_BLOCK_COUNT) |
+ mantis->line_bytes);
+ } else {
+ RISC_INSTR(RISC_WRITE | mantis->line_bytes);
+ }
+ RISC_INSTR(mantis->buf_dma + buf_pos);
+ buf_pos += mantis->line_bytes;
+ }
+ RISC_INSTR(RISC_JUMP);
+ RISC_INSTR(mantis->risc_dma);
+}
+
+void mantis_dma_start(struct mantis_pci *mantis)
+{
+ dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+
+ mantis_risc_program(mantis);
+ mmwrite(mantis->risc_dma, MANTIS_RISC_START);
+ mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ mmwrite(0, MANTIS_DMA_CTL);
+ mantis->last_block = mantis->finished_block = 0;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
+
+ mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
+ | MANTIS_RISC_EN, MANTIS_DMA_CTL);
+
+}
+
+void mantis_dma_stop(struct mantis_pci *mantis)
+{
+ u32 stat = 0, mask = 0;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+
+ mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
+
+ mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
+ MANTIS_DCAP_EN |
+ MANTIS_RISC_EN)), MANTIS_DMA_CTL);
+
+ mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
+
+ mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
+ MANTIS_INT_RISCEN), MANTIS_INT_MASK);
+}
+
+
+void mantis_dma_xfer(unsigned long data)
+{
+ struct mantis_pci *mantis = (struct mantis_pci *) data;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ while (mantis->last_block != mantis->finished_block) {
+ dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+ mantis->last_block, mantis->finished_block);
+
+ (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+ (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
+ mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
+ }
+}
diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h
new file mode 100644
index 0000000..6be00fa
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
new file mode 100644
index 0000000..99d82ee
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -0,0 +1,296 @@
+/*
+ Mantis PCI bridge driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (power) {
+ case POWER_ON:
+ dprintk(MANTIS_DEBUG, 1, "Power ON");
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ break;
+
+ case POWER_OFF:
+ dprintk(MANTIS_DEBUG, 1, "Power OFF");
+ gpio_set_bits(mantis, config->power, POWER_OFF);
+ msleep(100);
+ break;
+
+ default:
+ dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
+
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis_frontend_soft_reset(mantis);
+ err = mantis_frontend_power(mantis, POWER_OFF);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds++;
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds);
+
+ if (mantis->feeds == 1) {
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
+ mantis_dma_start(mantis);
+ }
+
+ return mantis->feeds;
+}
+
+static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds--;
+ if (mantis->feeds == 0) {
+ dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+ mantis_dma_stop(mantis);
+ }
+
+ return 0;
+}
+
+int __devinit mantis_dvb_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int result = -1;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+ result = dvb_register_adapter(&mantis->dvb_adapter,
+ "Mantis DVB adapter",
+ THIS_MODULE,
+ &mantis->pdev->dev,
+ adapter_nr);
+
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "Error registering adapter");
+ return -ENODEV;
+ }
+
+ mantis->dvb_adapter.priv = mantis;
+ mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING;
+
+ mantis->demux.priv = mantis;
+ mantis->demux.filternum = 256;
+ mantis->demux.feednum = 256;
+ mantis->demux.start_feed = mantis_dvb_start_feed;
+ mantis->demux.stop_feed = mantis_dvb_stop_feed;
+ mantis->demux.write_to_decoder = NULL;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+ result = dvb_dmx_init(&mantis->demux);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+
+ goto err0;
+ }
+
+ mantis->dmxdev.filternum = 256;
+ mantis->dmxdev.demux = &mantis->demux.dmx;
+ mantis->dmxdev.capabilities = 0;
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+ result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
+ goto err1;
+ }
+
+ mantis->fe_hw.source = DMX_FRONTEND_0;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err2;
+ }
+
+ mantis->fe_mem.source = DMX_MEMORY_FE;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err3;
+ }
+
+ result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err4;
+ }
+
+ dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
+ tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+ if (mantis->hwconfig) {
+ result = config->frontend_init(mantis, mantis->fe);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+ goto err5;
+ } else {
+ if (mantis->fe == NULL) {
+ dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+ goto err5;
+ }
+
+ if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+ if (mantis->fe->ops.release)
+ mantis->fe->ops.release(mantis->fe);
+
+ mantis->fe = NULL;
+ goto err5;
+ }
+ }
+ }
+
+ return 0;
+
+ /* Error conditions .. */
+err5:
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+err4:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+
+err3:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+err2:
+ dvb_dmxdev_release(&mantis->dmxdev);
+
+err1:
+ dvb_dmx_release(&mantis->demux);
+
+err0:
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
+
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
+{
+ int err;
+
+ if (mantis->fe) {
+ /* mantis_ca_exit(mantis); */
+ err = mantis_frontend_shutdown(mantis);
+ if (err != 0)
+ dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+ }
+
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+ dvb_dmxdev_release(&mantis->dmxdev);
+ dvb_dmx_release(&mantis->demux);
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h
new file mode 100644
index 0000000..464199d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.h
@@ -0,0 +1,35 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c
new file mode 100644
index 0000000..a7b369a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_evm.c
@@ -0,0 +1,117 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+static void mantis_hifevm_work(struct work_struct *work)
+{
+ struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, gpif_mask;
+
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ gpif_mask = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ if (gpif_stat & MANTIS_CARD_PLUGIN) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_plugin(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ }
+ } else {
+ if (gpif_stat & MANTIS_CARD_PLUGOUT) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_unplug(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+ }
+
+ if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_SBUF_WSTO)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OVFLW)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_BRRDY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_INTSTAT)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_EMPTY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OPDONE) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+ ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
+ ca->hif_event = MANTIS_SBUF_OPDONE;
+ wake_up(&ca->hif_opdone_wq);
+ }
+}
+
+int mantis_evmgr_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+ INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
+ mantis_pcmcia_init(ca);
+ schedule_work(&ca->hif_evm_work);
+ mantis_hif_init(ca);
+ return 0;
+}
+
+void mantis_evmgr_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+ flush_scheduled_work();
+ mantis_hif_exit(ca);
+ mantis_pcmcia_exit(ca);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
new file mode 100644
index 0000000..7477dac
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.c
@@ -0,0 +1,240 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_hif.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+
+#include "mantis_reg.h"
+
+
+static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_opdone_wq,
+ ca->hif_event & MANTIS_SBUF_OPDONE,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+ ca->hif_event &= ~MANTIS_SBUF_OPDONE;
+ return rc;
+}
+
+static int mantis_hif_write_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 opdone = 0, timeout = 0;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_write_wq,
+ mantis->gpif_status & MANTIS_GPIF_WRACK,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
+ mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
+ while (!opdone) {
+ opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
+ udelay(500);
+ timeout++;
+ if (timeout > 100) {
+ dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+ rc = -ETIMEDOUT;
+ break;
+ }
+ }
+ dprintk(MANTIS_DEBUG, 1, "HIF Write success");
+ return rc;
+}
+
+
+int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0, data, count = 4;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(count, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ mutex_unlock(&ca->ca_lock);
+ dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+ return (data >> 24) & 0xff;
+}
+
+int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 data, hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(1, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+ udelay(50);
+ mutex_unlock(&ca->ca_lock);
+
+ return (u8) data;
+}
+
+int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+ udelay(50);
+
+ return 0;
+}
+
+int mantis_hif_init(struct mantis_ca *ca)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ slot[0].slave_cfg = 0x70773028;
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg = MANTIS_MASK_BRRDY |
+ MANTIS_MASK_WRACK |
+ MANTIS_MASK_EXTIRQ |
+ MANTIS_MASK_WSTO |
+ MANTIS_MASK_OTHERR |
+ MANTIS_MASK_OVFLW;
+
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+void mantis_hif_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg &= ~MANTIS_MASK_BRRDY;
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h
new file mode 100644
index 0000000..9094f9e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.h
@@ -0,0 +1,29 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_HIF_H
+#define __MANTIS_HIF_H
+
+#define MANTIS_HIF_MEMRD 1
+#define MANTIS_HIF_MEMWR 2
+#define MANTIS_HIF_IOMRD 3
+#define MANTIS_HIF_IOMWR 4
+
+#endif /* __MANTIS_HIF_H */
diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c
new file mode 100644
index 0000000..7870bcf
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.c
@@ -0,0 +1,267 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
+
+#define TRIALS 10000
+
+static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ u32 rxd, i, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ rxd = (msg->addr << 25) | (1 << 24)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ rxd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(rxd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
+ rxd = mmread(MANTIS_I2CDATA_CTL);
+ msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ int i;
+ u32 txd = 0, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ txd = (msg->addr << 25) | (msg->buf[i] << 8)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ txd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ int ret = 0, i = 0, trials;
+ u32 stat, data, txd;
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+
+ mantis = i2c_get_adapdata(adapter);
+ BUG_ON(!mantis);
+ config = mantis->hwconfig;
+ BUG_ON(!config);
+
+ dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
+ mutex_lock(&mantis->i2c_lock);
+
+ while (i < num) {
+ /* Byte MODE */
+ if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+ ((i + 1) < num) &&
+ (msgs[i].len < 2) &&
+ (msgs[i + 1].len < 2) &&
+ (msgs[i + 1].flags & I2C_M_RD)) {
+
+ dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n");
+
+ /* Read operation */
+ txd = msgs[i].addr << 25 | (0x1 << 24)
+ | (msgs[i].buf[0] << 16)
+ | MANTIS_I2C_RATE_3;
+
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ /* check for xfer completion */
+ if (stat & MANTIS_INT_I2CDONE) {
+ /* check xfer was acknowledged */
+ if (stat & MANTIS_INT_I2CRACK) {
+ data = mmread(MANTIS_I2CDATA_CTL);
+ msgs[i + 1].buf[0] = (data >> 8) & 0xff;
+ dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ i += 2; /* Write/Read operation in one go */
+ }
+
+ if (i < num) {
+ if (msgs[i].flags & I2C_M_RD)
+ ret = mantis_i2c_read(mantis, &msgs[i]);
+ else
+ ret = mantis_i2c_write(mantis, &msgs[i]);
+
+ i++;
+ if (ret < 0)
+ goto bail_out;
+ }
+
+ }
+
+ mutex_unlock(&mantis->i2c_lock);
+
+ return num;
+
+bail_out:
+ mutex_unlock(&mantis->i2c_lock);
+ return ret;
+}
+
+static u32 mantis_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mantis_algo = {
+ .master_xfer = mantis_i2c_xfer,
+ .functionality = mantis_i2c_func,
+};
+
+int __devinit mantis_i2c_init(struct mantis_pci *mantis)
+{
+ u32 intstat, intmask;
+ struct i2c_adapter *i2c_adapter = &mantis->adapter;
+ struct pci_dev *pdev = mantis->pdev;
+
+ init_waitqueue_head(&mantis->i2c_wq);
+ mutex_init(&mantis->i2c_lock);
+ strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
+ i2c_set_adapdata(i2c_adapter, mantis);
+
+ i2c_adapter->owner = THIS_MODULE;
+ i2c_adapter->class = I2C_CLASS_TV_DIGITAL;
+ i2c_adapter->algo = &mantis_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->timeout = 500;
+ i2c_adapter->retries = 3;
+ i2c_adapter->dev.parent = &pdev->dev;
+
+ mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
+ if (mantis->i2c_rc < 0)
+ return mantis->i2c_rc;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
+
+ intstat = mmread(MANTIS_INT_STAT);
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite(intstat, MANTIS_INT_STAT);
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
+
+int mantis_i2c_exit(struct mantis_pci *mantis)
+{
+ u32 intmask;
+
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
+ return i2c_del_adapter(&mantis->adapter);
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h
new file mode 100644
index 0000000..1342df2
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+#define I2C_STOP (1 << 0)
+#define I2C_READ (1 << 1)
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
new file mode 100644
index 0000000..6a9df77
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -0,0 +1,148 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+static struct ir_scancode mantis_ir_table[] = {
+ { 0x29, KEY_POWER },
+ { 0x28, KEY_FAVORITES },
+ { 0x30, KEY_TEXT },
+ { 0x17, KEY_INFO }, /* Preview */
+ { 0x23, KEY_EPG },
+ { 0x3b, KEY_F22 }, /* Record List */
+ { 0x3c, KEY_1 },
+ { 0x3e, KEY_2 },
+ { 0x39, KEY_3 },
+ { 0x36, KEY_4 },
+ { 0x22, KEY_5 },
+ { 0x20, KEY_6 },
+ { 0x32, KEY_7 },
+ { 0x26, KEY_8 },
+ { 0x24, KEY_9 },
+ { 0x2a, KEY_0 },
+
+ { 0x33, KEY_CANCEL },
+ { 0x2c, KEY_BACK },
+ { 0x15, KEY_CLEAR },
+ { 0x3f, KEY_TAB },
+ { 0x10, KEY_ENTER },
+ { 0x14, KEY_UP },
+ { 0x0d, KEY_RIGHT },
+ { 0x0e, KEY_DOWN },
+ { 0x11, KEY_LEFT },
+
+ { 0x21, KEY_VOLUMEUP },
+ { 0x35, KEY_VOLUMEDOWN },
+ { 0x3d, KEY_CHANNELDOWN },
+ { 0x3a, KEY_CHANNELUP },
+ { 0x2e, KEY_RECORD },
+ { 0x2b, KEY_PLAY },
+ { 0x13, KEY_PAUSE },
+ { 0x25, KEY_STOP },
+
+ { 0x1f, KEY_REWIND },
+ { 0x2d, KEY_FASTFORWARD },
+ { 0x1e, KEY_PREVIOUS }, /* Replay |< */
+ { 0x1d, KEY_NEXT }, /* Skip >| */
+
+ { 0x0b, KEY_CAMERA }, /* Capture */
+ { 0x0f, KEY_LANGUAGE }, /* SAP */
+ { 0x18, KEY_MODE }, /* PIP */
+ { 0x12, KEY_ZOOM }, /* Full screen */
+ { 0x1c, KEY_SUBTITLE },
+ { 0x2f, KEY_MUTE },
+ { 0x16, KEY_F20 }, /* L/R */
+ { 0x38, KEY_F21 }, /* Hibernate */
+
+ { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
+ { 0x31, KEY_AGAIN }, /* Recall */
+ { 0x1a, KEY_KPPLUS }, /* Zoom+ */
+ { 0x19, KEY_KPMINUS }, /* Zoom- */
+ { 0x27, KEY_RED },
+ { 0x0C, KEY_GREEN },
+ { 0x01, KEY_YELLOW },
+ { 0x00, KEY_BLUE },
+};
+
+struct ir_scancode_table ir_mantis = {
+ .scan = mantis_ir_table,
+ .size = ARRAY_SIZE(mantis_ir_table),
+};
+EXPORT_SYMBOL_GPL(ir_mantis);
+
+int mantis_input_init(struct mantis_pci *mantis)
+{
+ struct input_dev *rc;
+ struct ir_input_state rc_state;
+ char name[80], dev[80];
+ int err;
+
+ rc = input_allocate_device();
+ if (!rc) {
+ dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+ return -ENOMEM;
+ }
+
+ sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+ sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+
+ rc->name = name;
+ rc->phys = dev;
+
+ ir_input_init(rc, &rc_state, IR_TYPE_OTHER);
+
+ rc->id.bustype = BUS_PCI;
+ rc->id.vendor = mantis->vendor_id;
+ rc->id.product = mantis->device_id;
+ rc->id.version = 1;
+ rc->dev = mantis->pdev->dev;
+
+ err = ir_input_register(rc, &ir_mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
+ input_free_device(rc);
+ return -ENODEV;
+ }
+
+ mantis->rc = rc;
+
+ return 0;
+}
+
+int mantis_exit(struct mantis_pci *mantis)
+{
+ struct input_dev *rc = mantis->rc;
+
+ ir_input_unregister(rc);
+
+ return 0;
+}
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
new file mode 100644
index 0000000..de148de
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.c
@@ -0,0 +1,130 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err;
+ u8 buf = reg;
+
+ struct i2c_msg msg[] = {
+ { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+ };
+
+ err = i2c_transfer(adapter, msg, 2);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+ int err;
+ u8 mac_addr[6] = {0};
+
+ err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+ return err;
+ }
+
+ dprintk(MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mac_addr[0],
+ mac_addr[1],
+ mac_addr[2],
+ mac_addr[3],
+ mac_addr[4],
+ mac_addr[5]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+ u32 reg;
+
+ reg = mmread(MANTIS_CONTROL);
+ switch (stream_ctl) {
+ case STREAM_TO_HIF:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+
+ case STREAM_TO_CAM:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
new file mode 100644
index 0000000..188fe5a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.h
@@ -0,0 +1,51 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_IOC_H
+#define __MANTIS_IOC_H
+
+#define GPIF_A00 0x00
+#define GPIF_A01 0x01
+#define GPIF_A02 0x02
+#define GPIF_A03 0x03
+#define GPIF_A04 0x04
+#define GPIF_A05 0x05
+#define GPIF_A06 0x06
+#define GPIF_A07 0x07
+#define GPIF_A08 0x08
+#define GPIF_A09 0x09
+#define GPIF_A10 0x0a
+#define GPIF_A11 0x0b
+
+#define GPIF_A12 0x0c
+#define GPIF_A13 0x0d
+#define GPIF_A14 0x0e
+
+enum mantis_stream_control {
+ STREAM_TO_HIF = 0,
+ STREAM_TO_CAM
+};
+
+extern int mantis_get_mac(struct mantis_pci *mantis);
+extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+
+extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
+
+#endif /* __MANTIS_IOC_H */
diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h
new file mode 100644
index 0000000..2a81477
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_link.h
@@ -0,0 +1,83 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_LINK_H
+#define __MANTIS_LINK_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include "dvb_ca_en50221.h"
+
+enum mantis_sbuf_status {
+ MANTIS_SBUF_DATA_AVAIL = 1,
+ MANTIS_SBUF_DATA_EMPTY = 2,
+ MANTIS_SBUF_DATA_OVFLW = 3
+};
+
+struct mantis_slot {
+ u32 timeout;
+ u32 slave_cfg;
+ u32 bar;
+};
+
+/* Physical layer */
+enum mantis_slot_state {
+ MODULE_INSERTED = 3,
+ MODULE_XTRACTED = 4
+};
+
+struct mantis_ca {
+ struct mantis_slot slot[4];
+
+ struct work_struct hif_evm_work;
+
+ u32 hif_event;
+ wait_queue_head_t hif_opdone_wq;
+ wait_queue_head_t hif_brrdyw_wq;
+ wait_queue_head_t hif_data_wq;
+ wait_queue_head_t hif_write_wq; /* HIF Write op */
+
+ enum mantis_sbuf_status sbuf_status;
+
+ enum mantis_slot_state slot_state;
+
+ void *ca_priv;
+
+ struct dvb_ca_en50221 en50221;
+ struct mutex ca_lock;
+};
+
+/* CA */
+extern void mantis_event_cam_plugin(struct mantis_ca *ca);
+extern void mantis_event_cam_unplug(struct mantis_ca *ca);
+extern int mantis_pcmcia_init(struct mantis_ca *ca);
+extern void mantis_pcmcia_exit(struct mantis_ca *ca);
+extern int mantis_evmgr_init(struct mantis_ca *ca);
+extern void mantis_evmgr_exit(struct mantis_ca *ca);
+
+/* HIF */
+extern int mantis_hif_init(struct mantis_ca *ca);
+extern void mantis_hif_exit(struct mantis_ca *ca);
+extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
+extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
+
+#endif /* __MANTIS_LINK_H */
diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c
new file mode 100644
index 0000000..6c7534a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.c
@@ -0,0 +1,177 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME "Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+ u8 revision, latency;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct pci_dev *pdev = mantis->pdev;
+ int err, ret = 0;
+
+ dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ config->model_name,
+ config->dev_type,
+ mantis->pdev->bus->number,
+ PCI_SLOT(mantis->pdev->devfn),
+ PCI_FUNC(mantis->pdev->devfn));
+
+ err = pci_enable_device(pdev);
+ if (err != 0) {
+ ret = -ENODEV;
+ dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+ goto fail0;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ pci_set_master(pdev);
+
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRIVER_NAME)) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+ ret = -ENODEV;
+ goto fail1;
+ }
+
+ mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!mantis->mmio) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+ ret = -ENODEV;
+ goto fail2;
+ }
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ mantis->latency = latency;
+ mantis->revision = revision;
+
+ dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+
+ dprintk(MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq,
+ mantis->latency,
+ mantis->mantis_addr,
+ mantis->mmio);
+
+ err = request_irq(pdev->irq,
+ config->irq_handler,
+ IRQF_SHARED,
+ DRIVER_NAME,
+ mantis);
+
+ if (err != 0) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+ ret = -ENODEV;
+ goto fail3;
+ }
+
+ pci_set_drvdata(pdev, mantis);
+ return ret;
+
+ /* Error conditions */
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+ if (mantis->mmio)
+ iounmap(mantis->mmio);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+ pci_disable_device(pdev);
+
+fail0:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+ pci_set_drvdata(pdev, NULL);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+ struct pci_dev *pdev = mantis->pdev;
+
+ dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+ free_irq(pdev->irq, mantis);
+ if (mantis->mmio) {
+ iounmap(mantis->mmio);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ }
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h
new file mode 100644
index 0000000..65f0045
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c
new file mode 100644
index 0000000..5cb545b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pcmcia.c
@@ -0,0 +1,120 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
+/*
+ * If Slot state is already PLUG_IN event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_plugin(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_XTRACTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0xda000000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_INSERTED;
+ }
+ udelay(100);
+}
+
+/*
+ * If Slot state is already UN_PLUG event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_unplug(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0x00da0000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGIN;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_XTRACTED;
+ }
+ udelay(100);
+}
+
+int mantis_pcmcia_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, card_stat;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ card_stat = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_XTRACTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+
+ return 0;
+}
+
+void mantis_pcmcia_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
+ mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+}
diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h
new file mode 100644
index 0000000..7761f9d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_reg.h
@@ -0,0 +1,197 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_REG_H
+#define __MANTIS_REG_H
+
+/* Interrupts */
+#define MANTIS_INT_STAT 0x00
+#define MANTIS_INT_MASK 0x04
+
+#define MANTIS_INT_RISCSTAT (0x0f << 28)
+#define MANTIS_INT_RISCEN (0x01 << 27)
+#define MANTIS_INT_I2CRACK (0x01 << 26)
+
+/* #define MANTIS_INT_GPIF (0xff << 12) */
+
+#define MANTIS_INT_PCMCIA7 (0x01 << 19)
+#define MANTIS_INT_PCMCIA6 (0x01 << 18)
+#define MANTIS_INT_PCMCIA5 (0x01 << 17)
+#define MANTIS_INT_PCMCIA4 (0x01 << 16)
+#define MANTIS_INT_PCMCIA3 (0x01 << 15)
+#define MANTIS_INT_PCMCIA2 (0x01 << 14)
+#define MANTIS_INT_PCMCIA1 (0x01 << 13)
+#define MANTIS_INT_PCMCIA0 (0x01 << 12)
+#define MANTIS_INT_IRQ1 (0x01 << 11)
+#define MANTIS_INT_IRQ0 (0x01 << 10)
+#define MANTIS_INT_OCERR (0x01 << 8)
+#define MANTIS_INT_PABORT (0x01 << 7)
+#define MANTIS_INT_RIPERR (0x01 << 6)
+#define MANTIS_INT_PPERR (0x01 << 5)
+#define MANTIS_INT_FTRGT (0x01 << 3)
+#define MANTIS_INT_RISCI (0x01 << 1)
+#define MANTIS_INT_I2CDONE (0x01 << 0)
+
+/* DMA */
+#define MANTIS_DMA_CTL 0x08
+#define MANTIS_GPIF_RD (0xff << 24)
+#define MANTIS_GPIF_WR (0xff << 16)
+#define MANTIS_CPU_DO (0x01 << 10)
+#define MANTIS_DRV_DO (0x01 << 9)
+#define MANTIS_I2C_RD (0x01 << 7)
+#define MANTIS_I2C_WR (0x01 << 6)
+#define MANTIS_DCAP_MODE (0x01 << 5)
+#define MANTIS_FIFO_TP_4 (0x00 << 3)
+#define MANTIS_FIFO_TP_8 (0x01 << 3)
+#define MANTIS_FIFO_TP_16 (0x02 << 3)
+#define MANTIS_FIFO_EN (0x01 << 2)
+#define MANTIS_DCAP_EN (0x01 << 1)
+#define MANTIS_RISC_EN (0x01 << 0)
+
+/* DEBUG */
+#define MANTIS_DEBUGREG 0x0c
+#define MANTIS_DATINV (0x0e << 7)
+#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
+#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
+
+#define MANTIS_RISC_START 0x10
+#define MANTIS_RISC_PC 0x14
+
+/* I2C */
+#define MANTIS_I2CDATA_CTL 0x18
+#define MANTIS_I2C_RATE_1 (0x00 << 6)
+#define MANTIS_I2C_RATE_2 (0x01 << 6)
+#define MANTIS_I2C_RATE_3 (0x02 << 6)
+#define MANTIS_I2C_RATE_4 (0x03 << 6)
+#define MANTIS_I2C_STOP (0x01 << 5)
+#define MANTIS_I2C_PGMODE (0x01 << 3)
+
+/* DATA */
+#define MANTIS_CMD_DATA_R1 0x20
+#define MANTIS_CMD_DATA_3 (0xff << 24)
+#define MANTIS_CMD_DATA_2 (0xff << 16)
+#define MANTIS_CMD_DATA_1 (0xff << 8)
+#define MANTIS_CMD_DATA_0 (0xff << 0)
+
+#define MANTIS_CMD_DATA_R2 0x24
+#define MANTIS_CMD_DATA_7 (0xff << 24)
+#define MANTIS_CMD_DATA_6 (0xff << 16)
+#define MANTIS_CMD_DATA_5 (0xff << 8)
+#define MANTIS_CMD_DATA_4 (0xff << 0)
+
+#define MANTIS_CONTROL 0x28
+#define MANTIS_DET (0x01 << 7)
+#define MANTIS_DAT_CF_EN (0x01 << 6)
+#define MANTIS_ACS (0x03 << 4)
+#define MANTIS_VCCEN (0x01 << 3)
+#define MANTIS_BYPASS (0x01 << 2)
+#define MANTIS_MRST (0x01 << 1)
+#define MANTIS_CRST_INT (0x01 << 0)
+
+#define MANTIS_GPIF_CFGSLA 0x84
+#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
+#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
+#define MANTIS_GPIF_WAITPOL (0x01 << 24)
+#define MANTIS_GPIF_NCDELAY (0x07 << 20)
+#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16)
+#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15)
+#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8)
+#define MANTIS_GPIF_DEVTYPE (0x07 << 4)
+#define MANTIS_GPIF_BIGENDIAN (0x01 << 3)
+#define MANTIS_GPIF_FETCHCMD (0x03 << 1)
+#define MANTIS_GPIF_HWORDDEV (0x01 << 0)
+
+#define MANTIS_GPIF_WSTOPER 0x90
+#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31)
+#define MANTIS_GPIF_PARBOOTN (0x01 << 29)
+#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24)
+#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23)
+#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16)
+#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15)
+#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8)
+#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7)
+#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0)
+
+#define MANTIS_GPIF_CS2RW 0x94
+#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31)
+#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24)
+#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23)
+#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16)
+#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15)
+#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8)
+#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7)
+#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0)
+
+#define MANTIS_GPIF_IRQCFG 0x98
+#define MANTIS_GPIF_IRQPOL (0x01 << 8)
+#define MANTIS_MASK_WRACK (0x01 << 7)
+#define MANTIS_MASK_BRRDY (0x01 << 6)
+#define MANTIS_MASK_OVFLW (0x01 << 5)
+#define MANTIS_MASK_OTHERR (0x01 << 4)
+#define MANTIS_MASK_WSTO (0x01 << 3)
+#define MANTIS_MASK_EXTIRQ (0x01 << 2)
+#define MANTIS_MASK_PLUGIN (0x01 << 1)
+#define MANTIS_MASK_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_STATUS 0x9c
+#define MANTIS_SBUF_KILLOP (0x01 << 15)
+#define MANTIS_SBUF_OPDONE (0x01 << 14)
+#define MANTIS_SBUF_EMPTY (0x01 << 13)
+#define MANTIS_GPIF_DETSTAT (0x01 << 9)
+#define MANTIS_GPIF_INTSTAT (0x01 << 8)
+#define MANTIS_GPIF_WRACK (0x01 << 7)
+#define MANTIS_GPIF_BRRDY (0x01 << 6)
+#define MANTIS_SBUF_OVFLW (0x01 << 5)
+#define MANTIS_GPIF_OTHERR (0x01 << 4)
+#define MANTIS_SBUF_WSTO (0x01 << 3)
+#define MANTIS_GPIF_EXTIRQ (0x01 << 2)
+#define MANTIS_CARD_PLUGIN (0x01 << 1)
+#define MANTIS_CARD_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_BRADDR 0xa0
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_BRBYTES 0xa4
+#define MANTIS_GPIF_BRCNT (0xfff << 0)
+
+#define MANTIS_PCMCIA_RESET 0xa8
+#define MANTIS_PCMCIA_RSTVAL (0xff << 0)
+
+#define MANTIS_CARD_RESET 0xac
+
+#define MANTIS_GPIF_ADDR 0xb0
+#define MANTIS_GPIF_HIFRDWRN (0x01 << 31)
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_HIFADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_DOUT 0xb4
+#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0)
+
+#define MANTIS_GPIF_DIN 0xb8
+#define MANTIS_GPIF_HIFDIN (0xfffffff << 0)
+
+#define MANTIS_GPIF_SPARE 0xbc
+#define MANTIS_GPIF_LOGICRD (0xffff << 16)
+#define MANTIS_GPIF_LOGICRW (0xffff << 0)
+
+#endif /* __MANTIS_REG_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
new file mode 100644
index 0000000..7d2f239
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -0,0 +1,186 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+struct mantis_uart_params {
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+};
+
+static struct {
+ char string[7];
+} rates[5] = {
+ { "9600" },
+ { "19200" },
+ { "38400" },
+ { "57600" },
+ { "115200" }
+};
+
+static struct {
+ char string[5];
+} parity[3] = {
+ { "NONE" },
+ { "ODD" },
+ { "EVEN" }
+};
+
+#define UART_MAX_BUF 16
+
+int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u32 stat = 0, i;
+
+ /* get data */
+ for (i = 0; i < (config->bytes + 1); i++) {
+
+ stat = mmread(MANTIS_UART_STAT);
+
+ if (stat & MANTIS_UART_RXFIFO_FULL) {
+ dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
+ }
+ data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
+
+ dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+
+ if (data[i] & (1 << 7)) {
+ dprintk(MANTIS_ERROR, 1, "UART framing error");
+ return -EINVAL;
+ }
+ if (data[i] & (1 << 6)) {
+ dprintk(MANTIS_ERROR, 1, "UART parity error");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void mantis_uart_work(struct work_struct *work)
+{
+ struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u8 buf[16];
+ int i;
+
+ mantis_uart_read(mantis, buf);
+
+ for (i = 0; i < (config->bytes + 1); i++)
+ dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+}
+
+static int mantis_uart_setup(struct mantis_pci *mantis,
+ struct mantis_uart_params *params)
+{
+ u32 reg;
+
+ mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
+
+ reg = mmread(MANTIS_UART_BAUD);
+
+ switch (params->baud_rate) {
+ case MANTIS_BAUD_9600:
+ reg |= 0xd8;
+ break;
+ case MANTIS_BAUD_19200:
+ reg |= 0x6c;
+ break;
+ case MANTIS_BAUD_38400:
+ reg |= 0x36;
+ break;
+ case MANTIS_BAUD_57600:
+ reg |= 0x23;
+ break;
+ case MANTIS_BAUD_115200:
+ reg |= 0x11;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mmwrite(reg, MANTIS_UART_BAUD);
+
+ return 0;
+}
+
+int mantis_uart_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct mantis_uart_params params;
+
+ /* default parity: */
+ params.baud_rate = config->baud_rate;
+ params.parity = config->parity;
+ dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
+ rates[params.baud_rate].string,
+ parity[params.parity].string);
+
+ init_waitqueue_head(&mantis->uart_wq);
+ spin_lock_init(&mantis->uart_lock);
+
+ INIT_WORK(&mantis->uart_work, mantis_uart_work);
+
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+
+ mantis_uart_setup(mantis, ¶ms);
+
+ /* default 1 byte */
+ mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
+
+ /* flush buffer */
+ mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
+
+ /* enable interrupt */
+ mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
+ mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
+
+ schedule_work(&mantis->uart_work);
+ dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
+
+void mantis_uart_exit(struct mantis_pci *mantis)
+{
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h
new file mode 100644
index 0000000..ffb62a0
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.h
@@ -0,0 +1,58 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_UART_H
+#define __MANTIS_UART_H
+
+#define MANTIS_UART_CTL 0xe0
+#define MANTIS_UART_RXINT (1 << 4)
+#define MANTIS_UART_RXFLUSH (1 << 2)
+
+#define MANTIS_UART_RXD 0xe8
+#define MANTIS_UART_BAUD 0xec
+
+#define MANTIS_UART_STAT 0xf0
+#define MANTIS_UART_RXFIFO_DATA (1 << 7)
+#define MANTIS_UART_RXFIFO_EMPTY (1 << 6)
+#define MANTIS_UART_RXFIFO_FULL (1 << 3)
+#define MANTIS_UART_FRAME_ERR (1 << 2)
+#define MANTIS_UART_PARITY_ERR (1 << 1)
+#define MANTIS_UART_RXTHRESH_INT (1 << 0)
+
+enum mantis_baud {
+ MANTIS_BAUD_9600 = 0,
+ MANTIS_BAUD_19200,
+ MANTIS_BAUD_38400,
+ MANTIS_BAUD_57600,
+ MANTIS_BAUD_115200
+};
+
+enum mantis_parity {
+ MANTIS_PARITY_NONE = 0,
+ MANTIS_PARITY_EVEN,
+ MANTIS_PARITY_ODD,
+};
+
+struct mantis_pci;
+
+extern int mantis_uart_init(struct mantis_pci *mantis);
+extern void mantis_uart_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_UART_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
new file mode 100644
index 0000000..4a723bd
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.c
@@ -0,0 +1,212 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1033.h"
+#include "mantis_reg.h"
+
+u8 lgtdqcs001f_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x2a,
+ 0x05, 0x85,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x0c, 0x01,
+ 0x0d, 0x81,
+ 0x0e, 0x44,
+ 0x0f, 0x94,
+ 0x10, 0x3c,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x13, 0xb5,
+ 0x14, 0x4f,
+ 0x15, 0xc9,
+ 0x16, 0x80,
+ 0x17, 0x36,
+ 0x18, 0xfb,
+ 0x19, 0xcf,
+ 0x1a, 0xbc,
+ 0x1c, 0x2b,
+ 0x1d, 0x27,
+ 0x1e, 0x00,
+ 0x1f, 0x0b,
+ 0x20, 0xa1,
+ 0x21, 0x60,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x05,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+#define MANTIS_MODEL_NAME "VP-1033"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[4];
+ u32 div;
+
+
+ struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+ div = params->frequency / 250;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x83;
+ buf[3] = 0xc0;
+
+ if (params->frequency < 1531000)
+ buf[3] |= 0x04;
+ else
+ buf[3] &= ~0x04;
+ if (i2c_transfer(adapter, &msg, 1) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+ return -EIO;
+ }
+ msleep_interruptible(100);
+
+ return 0;
+}
+
+int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+struct stv0299_config lgtdqcs001f_config = {
+ .demod_address = 0x68,
+ .inittab = lgtdqcs001f_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+ fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+ lgtdqcs001f_config.demod_address);
+
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h
new file mode 100644
index 0000000..7daaa1b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1033_H
+#define __MANTIS_VP1033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1033_DVB_S 0x0016
+
+extern struct mantis_hwconfig vp1033_config;
+
+#endif /* __MANTIS_VP1033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
new file mode 100644
index 0000000..8e6ae55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -0,0 +1,119 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+struct mb86a16_config vp1034_mb86a16_config = {
+ .demod_address = 0x08,
+ .set_voltage = vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME "VP-1034"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 0);
+ break;
+ case SEC_VOLTAGE_18:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 1);
+ break;
+ case SEC_VOLTAGE_OFF:
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+ return -EINVAL;
+ }
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+ return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h
new file mode 100644
index 0000000..323f38e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1034_H
+#define __MANTIS_VP1034_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+
+
+#define MANTIS_VP_1034_DVB_S 0x0014
+
+extern struct mantis_hwconfig vp1034_config;
+extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+#endif /* __MANTIS_VP1034_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
new file mode 100644
index 0000000..515346d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -0,0 +1,358 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1041.h"
+#include "stb0899_reg.h"
+#include "stb0899_drv.h"
+#include "stb0899_cfg.h"
+#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
+
+#define MANTIS_MODEL_NAME "VP-1041"
+#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, *//* SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+struct stb0899_config vp1041_stb0899_config = {
+ .init_dev = vp1041_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = vp1041_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0x68, /* 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config vp1041_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+ mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+ if (mantis->fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+ vp1041_stb0899_config.demod_address);
+
+ if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
+ if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+ dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
+ }
+ } else {
+ return -EREMOTEIO;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1041_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h
new file mode 100644
index 0000000..1ae5b3d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1041_H
+#define __MANTIS_VP1041_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1041_DVB_S2 0x0031
+#define SKYSTAR_HD2_10 0x0001
+#define SKYSTAR_HD2_20 0x0003
+#define CINERGY_S2_PCI_HD 0x1179
+
+extern struct mantis_hwconfig vp1041_config;
+
+#endif /* __MANTIS_VP1041_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
new file mode 100644
index 0000000..10ce817
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -0,0 +1,187 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2033.h"
+
+#define MANTIS_MODEL_NAME "VP-2033"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2033_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h
new file mode 100644
index 0000000..c55242b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2033_H
+#define __MANTIS_VP2033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2033_DVB_C 0x0008
+
+extern struct mantis_hwconfig vp2033_config;
+
+#endif /* __MANTIS_VP2033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
new file mode 100644
index 0000000..a7ca233
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -0,0 +1,186 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2040.h"
+
+#define MANTIS_MODEL_NAME "VP-2040"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2040_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h
new file mode 100644
index 0000000..d125e21
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.h
@@ -0,0 +1,32 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2040_H
+#define __MANTIS_VP2040_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2040_DVB_C 0x0043
+#define CINERGY_C 0x1178
+#define CABLESTAR_HD2 0x0002
+
+extern struct mantis_hwconfig vp2040_config;
+
+#endif /* __MANTIS_VP2040_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c
new file mode 100644
index 0000000..4155c83
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.c
@@ -0,0 +1,38 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_vp3028.h"
+
+struct zl10353_config mantis_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+struct mantis_hwconfig vp3028_mantis_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h
new file mode 100644
index 0000000..b07be6a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+#include "zl10353.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct zl10353_config mantis_vp3028_config;
+extern struct mantis_hwconfig vp3028_mantis_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
new file mode 100644
index 0000000..1f43342
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -0,0 +1,105 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+struct zl10353_config mantis_vp3030_config = {
+ .demod_address = 0x0f,
+};
+
+struct tda665x_config env57h12d5_config = {
+ .name = "ENV57H12D5 (ET-50DT)",
+ .addr = 0x60,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
+ .frequency_offst = 3616667,
+ .ref_multiplier = 6, /* 1/6 MHz */
+ .ref_divider = 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME "VP-3030"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&mantis_vp3030_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ tda665x_attach(fe, &env57h12d5_config, adapter);
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3030_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+
+ .i2c_mode = MANTIS_BYTE_MODE
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h
new file mode 100644
index 0000000..5f12c42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3030_H
+#define __MANTIS_VP3030_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3030_DVB_T 0x0024
+
+extern struct mantis_hwconfig vp3030_config;
+
+#endif /* __MANTIS_VP3030_H */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e930a67..bd6214d 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1815,6 +1815,8 @@
/* put the buffer in the 'queued' queue */
i = gspca_dev->fr_q;
gspca_dev->fr_queue[i] = index;
+ if (gspca_dev->fr_i == i)
+ gspca_dev->cur_frame = frame;
gspca_dev->fr_q = (i + 1) % gspca_dev->nframes;
PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d",
gspca_dev->fr_q,
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index aa2f3c7..1b536f7d 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -48,6 +48,12 @@
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528")
}
}, {
+ .ident = "Fujitsu-Siemens Amilo Xi 2428",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428")
+ }
+ }, {
.ident = "Fujitsu-Siemens Amilo Xi 2528",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 4dbb882..0a6b8f0 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1533,7 +1533,7 @@
static void setsharpness_96(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
+ s8 val;
val = sd->sharpness;
if (val < 0) { /* auto */
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 4cff803..0ca1c06 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2319,7 +2319,7 @@
}
}
if (avg_lum > MAX_AVG_LUM) {
- if (sd->gain - 1 >= 0) {
+ if (sd->gain >= 1) {
sd->gain--;
set_gain(gspca_dev);
}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index 487d405..96c6192 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -228,6 +228,7 @@
/* This reg is written twice. Some kind of reset? */
{NULL, 0x1620, 0x80},
{NULL, 0x1620, 0x00},
+ {NULL, 0x1443, 0x00},
{NULL, 0x1423, 0x04},
{x1500, 0x1500, ARRAY_SIZE(x1500)},
{x1536, 0x1536, ARRAY_SIZE(x1536)},
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 716df6b..306b7d7 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -709,7 +709,7 @@
spca504B_PollingDataReady(gspca_dev);
/* Init the cam width height with some values get on init ? */
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
@@ -807,14 +807,14 @@
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21ad); /* hue */
- reg_w_riv(gspca_dev, 0, 0x01, 0x21ac); /* sat/hue */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21a3); /* gamma */
+ reg_w_riv(gspca_dev, 0, 0x21ad, 0x00); /* hue */
+ reg_w_riv(gspca_dev, 0, 0x21ac, 0x01); /* sat/hue */
+ reg_w_riv(gspca_dev, 0, 0x21a3, 0x00); /* gamma */
break;
case BRIDGE_SPCA536:
- reg_w_riv(gspca_dev, 0, 0x40, 0x20f5);
- reg_w_riv(gspca_dev, 0, 0x01, 0x20f4);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2089);
+ reg_w_riv(gspca_dev, 0, 0x20f5, 0x40);
+ reg_w_riv(gspca_dev, 0, 0x20f4, 0x01);
+ reg_w_riv(gspca_dev, 0, 0x2089, 0x00);
break;
}
if (pollreg)
@@ -887,11 +887,11 @@
switch (sd->bridge) {
case BRIDGE_SPCA504B:
reg_w_riv(gspca_dev, 0x1d, 0x00, 0);
- reg_w_riv(gspca_dev, 0, 0x01, 0x2306);
- reg_w_riv(gspca_dev, 0, 0x00, 0x0d04);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2000);
- reg_w_riv(gspca_dev, 0, 0x13, 0x2301);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2306);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01);
+ reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
/* fall thru */
case BRIDGE_SPCA533:
spca504B_PollingDataReady(gspca_dev);
@@ -1000,7 +1000,7 @@
spca504B_WaitCmdStatus(gspca_dev);
break;
default:
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index c090efc..71921c8 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -3009,6 +3009,10 @@
int l;
frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
l = frame->data_end - frame->data;
if (len > frame->v4l2_buf.length - l)
len = frame->v4l2_buf.length - l;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 2ba14fb..c167cc3 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -718,7 +718,7 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
err = -ENODEV;
goto exit;
}
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 7e42989..805226e 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -563,7 +563,7 @@
struct i2c_client *client = sd->priv;
struct rj54n1 *rj54n1 = to_rj54n1(client);
struct v4l2_rect *rect = &a->c;
- unsigned int dummy, output_w, output_h,
+ unsigned int dummy = 0, output_w, output_h,
input_w = rect->width, input_h = rect->height;
int ret;
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 9f85e91..a7ad781 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -420,19 +420,6 @@
ctrl |= SAA7134_MAIN_CTRL_TE5;
irq |= SAA7134_IRQ1_INTE_RA2_1 |
SAA7134_IRQ1_INTE_RA2_0;
-
- /* dma: setup channel 5 (= TS) */
-
- saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
- saa_writeb(SAA7134_TS_DMA1,
- ((dev->ts.nr_packets - 1) >> 8) & 0xff);
- /* TSNOPIT=0, TSCOLAP=0 */
- saa_writeb(SAA7134_TS_DMA2,
- (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
- saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
- saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
- SAA7134_RS_CONTROL_ME |
- (dev->ts.pt_ts.dma >> 12));
}
/* set task conditions + field handling */
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index 03488ba..b9817d7 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -250,6 +250,19 @@
BUG_ON(dev->ts_started);
+ /* dma: setup channel 5 (= TS) */
+ saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+ saa_writeb(SAA7134_TS_DMA1,
+ ((dev->ts.nr_packets - 1) >> 8) & 0xff);
+ /* TSNOPIT=0, TSCOLAP=0 */
+ saa_writeb(SAA7134_TS_DMA2,
+ (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+ saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+ saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+ SAA7134_RS_CONTROL_ME |
+ (dev->ts.pt_ts.dma >> 12));
+
+ /* reset hardware TS buffers */
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
saa_writeb(SAA7134_TS_SERIAL1, 0x03);
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d69363f..f09c714 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1827,7 +1827,7 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
dev_err(&pdev->dev, "Not enough CEU platform resources.\n");
err = -ENODEV;
goto exit;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 0469d7a..ec8ef8c 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1393,7 +1393,7 @@
size = entity->processing.bControlSize;
for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
- if (!usb_match_id(dev->intf, &blacklist[i].id))
+ if (!usb_match_one_id(dev->intf, &blacklist[i].id))
continue;
if (blacklist[i].index >= 8 * size ||
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index f854698..ea11839 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -59,9 +59,9 @@
* returns immediately.
*
* When the buffer is full, the completion handler removes it from the irq
- * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
+ * queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue.
* At that point, any process waiting on the buffer will be woken up. If a
- * process tries to dequeue a buffer after it has been marked ready, the
+ * process tries to dequeue a buffer after it has been marked done, the
* dequeing will succeed immediately.
*
* 2. Buffers are queued, user is waiting on a buffer and the device gets
@@ -201,6 +201,7 @@
break;
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
break;
case UVC_BUF_STATE_IDLE:
@@ -295,13 +296,15 @@
{
if (nonblocking) {
return (buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE)
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY)
? 0 : -EAGAIN;
}
return wait_event_interruptible(buf->wait,
buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE);
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY);
}
/*
@@ -348,6 +351,7 @@
case UVC_BUF_STATE_IDLE:
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
default:
uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
"(driver bug?).\n", buf->state);
@@ -489,6 +493,7 @@
spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_DONE;
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 9a98028..7dcf534 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -441,7 +441,7 @@
if (fid != stream->last_fid && buf->buf.bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
"toggled).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
return -EAGAIN;
}
@@ -470,7 +470,7 @@
/* Complete the current frame if the buffer size was exceeded. */
if (len > maxlen) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
}
}
@@ -482,7 +482,7 @@
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
if (data[0] == len)
uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
stream->last_fid ^= UVC_STREAM_FID;
}
@@ -568,8 +568,7 @@
uvc_video_decode_end(stream, buf, mem,
urb->iso_frame_desc[i].actual_length);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue, buf);
}
}
@@ -627,8 +626,7 @@
if (!stream->bulk.skip_payload && buf != NULL) {
uvc_video_decode_end(stream, buf, stream->bulk.header,
stream->bulk.payload_size);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue,
buf);
}
@@ -669,7 +667,7 @@
stream->bulk.payload_size == stream->bulk.max_payload_size) {
if (buf->buf.bytesused == stream->queue.buf_used) {
stream->queue.buf_used = 0;
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
uvc_queue_next_buffer(&stream->queue, buf);
stream->last_fid ^= UVC_STREAM_FID;
}
@@ -924,10 +922,8 @@
static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
{
struct usb_interface *intf = stream->intf;
- struct usb_host_interface *alts;
- struct usb_host_endpoint *ep = NULL;
- int intfnum = stream->intfnum;
- unsigned int bandwidth, psize, i;
+ struct usb_host_endpoint *ep;
+ unsigned int i;
int ret;
stream->last_fid = -1;
@@ -936,6 +932,12 @@
stream->bulk.payload_size = 0;
if (intf->num_altsetting > 1) {
+ struct usb_host_endpoint *best_ep = NULL;
+ unsigned int best_psize = 3 * 1024;
+ unsigned int bandwidth;
+ unsigned int uninitialized_var(altsetting);
+ int intfnum = stream->intfnum;
+
/* Isochronous endpoint, select the alternate setting. */
bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
@@ -949,6 +951,9 @@
}
for (i = 0; i < intf->num_altsetting; ++i) {
+ struct usb_host_interface *alts;
+ unsigned int psize;
+
alts = &intf->altsetting[i];
ep = uvc_find_endpoint(alts,
stream->header.bEndpointAddress);
@@ -958,21 +963,27 @@
/* Check if the bandwidth is high enough. */
psize = le16_to_cpu(ep->desc.wMaxPacketSize);
psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
- if (psize >= bandwidth)
- break;
+ if (psize >= bandwidth && psize <= best_psize) {
+ altsetting = i;
+ best_psize = psize;
+ best_ep = ep;
+ }
}
- if (i >= intf->num_altsetting) {
+ if (best_ep == NULL) {
uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
"for requested bandwidth.\n");
return -EIO;
}
- ret = usb_set_interface(stream->dev->udev, intfnum, i);
+ uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
+ "(%u B/frame bandwidth).\n", altsetting, best_psize);
+
+ ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
if (ret < 0)
return ret;
- ret = uvc_init_video_isoc(stream, ep, gfp_flags);
+ ret = uvc_init_video_isoc(stream, best_ep, gfp_flags);
} else {
/* Bulk endpoint, proceed to URB initialization. */
ep = uvc_find_endpoint(&intf->altsetting[0],
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 7ec9a04..2337585 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -365,8 +365,9 @@
UVC_BUF_STATE_IDLE = 0,
UVC_BUF_STATE_QUEUED = 1,
UVC_BUF_STATE_ACTIVE = 2,
- UVC_BUF_STATE_DONE = 3,
- UVC_BUF_STATE_ERROR = 4,
+ UVC_BUF_STATE_READY = 3,
+ UVC_BUF_STATE_DONE = 4,
+ UVC_BUF_STATE_ERROR = 5,
};
struct uvc_buffer {
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ca2f2c4..8f0d184 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -11,9 +11,9 @@
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
-obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o
-obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
-obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
+obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index e22128c..95c1e6b 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -80,6 +80,7 @@
u16 irq_bothedge[4];
struct gpio_chip gpio;
struct device *dev;
+ void __iomem *tmio_cnf;
struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
};
@@ -685,8 +686,24 @@
.resources = ds1wm_resources,
};
+static void asic3_mmc_pwr(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
+static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
static struct tmio_mmc_data asic3_mmc_data = {
- .hclk = 24576000,
+ .hclk = 24576000,
+ .set_pwr = asic3_mmc_pwr,
+ .set_clk_div = asic3_mmc_clk_div,
};
static struct resource asic3_mmc_resources[] = {
@@ -696,11 +713,6 @@
.flags = IORESOURCE_MEM,
},
{
- .start = ASIC3_SD_CONFIG_BASE,
- .end = ASIC3_SD_CONFIG_BASE + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
@@ -743,6 +755,10 @@
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SDPWR, 1);
+ /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
+ tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
+ ASIC3_SD_CTRL_BASE >> 1);
+
return 0;
}
@@ -797,10 +813,15 @@
asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
/* MMC */
+ asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
+ mem_sdio->start, 0x400 >> asic->bus_shift);
+ if (!asic->tmio_cnf) {
+ ret = -ENOMEM;
+ dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
+ goto out;
+ }
asic3_mmc_resources[0].start >>= asic->bus_shift;
asic3_mmc_resources[0].end >>= asic->bus_shift;
- asic3_mmc_resources[1].start >>= asic->bus_shift;
- asic3_mmc_resources[1].end >>= asic->bus_shift;
asic3_cell_mmc.platform_data = &asic3_cell_mmc;
asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
@@ -820,7 +841,10 @@
static void asic3_mfd_remove(struct platform_device *pdev)
{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
mfd_remove_devices(&pdev->dev);
+ iounmap(asic->tmio_cnf);
}
/* Core */
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index a1ade23..735c8a4 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -619,6 +619,8 @@
}
/* This should go away (END) */
+ mc13783_unlock(mc13783);
+
if (pdata->flags & MC13783_USE_ADC)
mc13783_add_subdevice(mc13783, "mc13783-adc");
@@ -641,8 +643,6 @@
if (pdata->flags & MC13783_USE_TOUCHSCREEN)
mc13783_add_subdevice(mc13783, "mc13783-ts");
- mc13783_unlock(mc13783);
-
return 0;
}
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 0a255c1..bcf4687 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -38,6 +38,19 @@
T7L66XB_CELL_MMC,
};
+static const struct resource t7l66xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_T7L66XB_MMC,
+ .end = IRQ_T7L66XB_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
#define SCR_REVID 0x08 /* b Revision ID */
#define SCR_IMR 0x42 /* b Interrupt Mask */
#define SCR_DEV_CTL 0xe0 /* b Device control */
@@ -83,6 +96,9 @@
spin_unlock_irqrestore(&t7l66xb->lock, flags);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
@@ -106,28 +122,28 @@
return 0;
}
+static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
+}
+
+static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
+}
+
/*--------------------------------------------------------------------------*/
static struct tmio_mmc_data t7166xb_mmc_data = {
.hclk = 24000000,
-};
-
-static const struct resource t7l66xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_T7L66XB_MMC,
- .end = IRQ_T7L66XB_MMC,
- .flags = IORESOURCE_IRQ,
- },
+ .set_pwr = t7l66xb_mmc_pwr,
+ .set_clk_div = t7l66xb_mmc_clk_div,
};
static const struct resource t7l66xb_nand_resources[] = {
@@ -282,6 +298,9 @@
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 3280ab33..5c7f043 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -22,28 +22,52 @@
TC6387XB_CELL_MMC,
};
+struct tc6387xb {
+ void __iomem *scr;
+ struct clk *clk32k;
+ struct resource rscr;
+};
+
+static struct resource tc6387xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*--------------------------------------------------------------------------*/
+
#ifdef CONFIG_PM
static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
static int tc6387xb_resume(struct platform_device *dev)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
@@ -53,12 +77,32 @@
/*--------------------------------------------------------------------------*/
+static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
+}
+
+static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
+}
+
+
static int tc6387xb_mmc_enable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
+
+ tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
return 0;
}
@@ -66,36 +110,20 @@
static int tc6387xb_mmc_disable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
-/*--------------------------------------------------------------------------*/
-
static struct tmio_mmc_data tc6387xb_mmc_data = {
.hclk = 24000000,
+ .set_pwr = tc6387xb_mmc_pwr,
+ .set_clk_div = tc6387xb_mmc_clk_div,
};
-static struct resource tc6387xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
+/*--------------------------------------------------------------------------*/
static struct mfd_cell tc6387xb_cells[] = {
[TC6387XB_CELL_MMC] = {
@@ -111,8 +139,9 @@
static int tc6387xb_probe(struct platform_device *dev)
{
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- struct resource *iomem;
+ struct resource *iomem, *rscr;
struct clk *clk32k;
+ struct tc6387xb *tc6387xb;
int irq, ret;
iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -120,18 +149,40 @@
return -EINVAL;
}
+ tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL);
+ if (!tc6387xb)
+ return -ENOMEM;
+
ret = platform_get_irq(dev, 0);
if (ret >= 0)
irq = ret;
else
- goto err_resource;
+ goto err_no_irq;
clk32k = clk_get(&dev->dev, "CLK_CK32K");
if (IS_ERR(clk32k)) {
ret = PTR_ERR(clk32k);
- goto err_resource;
+ goto err_no_clk;
}
- platform_set_drvdata(dev, clk32k);
+
+ rscr = &tc6387xb->rscr;
+ rscr->name = "tc6387xb-core";
+ rscr->start = iomem->start;
+ rscr->end = iomem->start + 0xff;
+ rscr->flags = IORESOURCE_MEM;
+
+ ret = request_resource(iomem, rscr);
+ if (ret)
+ goto err_resource;
+
+ tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+ if (!tc6387xb->scr) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ tc6387xb->clk32k = clk32k;
+ platform_set_drvdata(dev, tc6387xb);
if (pdata && pdata->enable)
pdata->enable(dev);
@@ -149,8 +200,13 @@
if (!ret)
return 0;
- clk_put(clk32k);
+err_ioremap:
+ release_resource(&tc6387xb->rscr);
err_resource:
+ clk_put(clk32k);
+err_no_clk:
+err_no_irq:
+ kfree(tc6387xb);
return ret;
}
@@ -195,3 +251,4 @@
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ian Molton");
MODULE_ALIAS("platform:tc6387xb");
+
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 1429a73..4bc5a08 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,10 +136,6 @@
return 0;
}
-static struct tmio_mmc_data tc6393xb_mmc_data = {
- .hclk = 24000000,
-};
-
static struct resource __devinitdata tc6393xb_nand_resources[] = {
{
.start = 0x1000,
@@ -165,11 +161,6 @@
.flags = IORESOURCE_MEM,
},
{
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
.start = IRQ_TC6393_MMC,
.end = IRQ_TC6393_MMC,
.flags = IORESOURCE_IRQ,
@@ -346,6 +337,50 @@
}
EXPORT_SYMBOL(tc6393xb_lcd_mode);
+static int tc6393xb_mmc_enable(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static int tc6393xb_mmc_resume(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
+}
+
+static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
+}
+
+static struct tmio_mmc_data tc6393xb_mmc_data = {
+ .hclk = 24000000,
+ .set_pwr = tc6393xb_mmc_pwr,
+ .set_clk_div = tc6393xb_mmc_clk_div,
+};
+
static struct mfd_cell __devinitdata tc6393xb_cells[] = {
[TC6393XB_CELL_NAND] = {
.name = "tmio-nand",
@@ -355,6 +390,8 @@
},
[TC6393XB_CELL_MMC] = {
.name = "tmio-mmc",
+ .enable = tc6393xb_mmc_enable,
+ .resume = tc6393xb_mmc_resume,
.driver_data = &tc6393xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
.resources = tc6393xb_mmc_resources,
@@ -836,3 +873,4 @@
MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
MODULE_ALIAS("platform:tc6393xb");
+
diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
new file mode 100644
index 0000000..eddc19a
--- /dev/null
+++ b/drivers/mfd/tmio_core.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright(c) 2009 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/tmio.h>
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
+{
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ /* Disable SD power during suspend */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
+
+ /* The below is required but why? FIXME */
+ sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
+
+ /* Power down SD bus */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_enable);
+
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
+{
+
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_resume);
+
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
+}
+EXPORT_SYMBOL(tmio_core_mmc_pwr);
+
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
+}
+EXPORT_SYMBOL(tmio_core_mmc_clk_div);
+
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 8485a70..9a970bd 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -134,8 +134,7 @@
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
return 0;
- if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
- (reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+ if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index c8df547..9025f29 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -434,7 +434,7 @@
irq_handler_t handler, unsigned long flags,
const char *name, void *data)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler)
return -EINVAL;
if (wm8350->irq[irq].handler)
@@ -453,7 +453,7 @@
int wm8350_free_irq(struct wm8350 *wm8350, int irq)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ)
return -EINVAL;
wm8350_mask_irq(wm8350, irq);
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 85f0e8c..1f552c6 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -85,7 +85,14 @@
mutex_lock(&open_lock);
md->usage--;
if (md->usage == 0) {
+ int devmaj = MAJOR(disk_devt(md->disk));
int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT;
+
+ if (!devmaj)
+ devidx = md->disk->first_minor >> MMC_SHIFT;
+
+ blk_cleanup_queue(md->queue.queue);
+
__clear_bit(devidx, dev_use);
put_disk(md->disk);
@@ -613,6 +620,7 @@
return 0;
out:
+ mmc_cleanup_queue(&md->queue);
mmc_blk_put(md);
return err;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 49e5823..c5a7a85 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -90,9 +90,10 @@
struct request *req;
if (!mq) {
- printk(KERN_ERR "MMC: killing requests for dead queue\n");
- while ((req = blk_fetch_request(q)) != NULL)
+ while ((req = blk_fetch_request(q)) != NULL) {
+ req->cmd_flags |= REQ_QUIET;
__blk_end_request_all(req, -EIO);
+ }
return;
}
@@ -223,17 +224,18 @@
struct request_queue *q = mq->queue;
unsigned long flags;
- /* Mark that we should start throwing out stragglers */
- spin_lock_irqsave(q->queue_lock, flags);
- q->queuedata = NULL;
- spin_unlock_irqrestore(q->queue_lock, flags);
-
/* Make sure the queue isn't suspended, as that will deadlock */
mmc_queue_resume(mq);
/* Then terminate our worker thread */
kthread_stop(mq->thread);
+ /* Empty the queue */
+ spin_lock_irqsave(q->queue_lock, flags);
+ q->queuedata = NULL;
+ blk_start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
if (mq->bounce_sg)
kfree(mq->bounce_sg);
mq->bounce_sg = NULL;
@@ -245,8 +247,6 @@
kfree(mq->bounce_buf);
mq->bounce_buf = NULL;
- blk_cleanup_queue(mq->queue);
-
mq->card = NULL;
}
EXPORT_SYMBOL(mmc_cleanup_queue);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c111894..0eac6c8 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -207,7 +207,7 @@
}
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
- if (card->ext_csd.rev > 3) {
+ if (card->ext_csd.rev > 5) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
card->ext_csd.rev);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 90d168a..84c103a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ * Copyright (C) 2010 ST-Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -34,9 +35,6 @@
#define DRIVER_NAME "mmci-pl18x"
-#define DBG(host,fmt,args...) \
- pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
static unsigned int fmax = 515633;
/*
@@ -105,8 +103,8 @@
void __iomem *base;
int blksz_bits;
- DBG(host, "blksz %04x blks %04x flags %08x\n",
- data->blksz, data->blocks, data->flags);
+ dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+ data->blksz, data->blocks, data->flags);
host->data = data;
host->size = data->blksz;
@@ -155,7 +153,7 @@
{
void __iomem *base = host->base;
- DBG(host, "op %02x arg %08x flags %08x\n",
+ dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
@@ -184,8 +182,20 @@
{
if (status & MCI_DATABLOCKEND) {
host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+ /*
+ * On the U300 some signal or other is
+ * badly routed so that a data write does
+ * not properly terminate with a MCI_DATAEND
+ * status flag. This quirk will make writes
+ * work again.
+ */
+ if (data->flags & MMC_DATA_WRITE)
+ status |= MCI_DATAEND;
+#endif
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL)
data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
@@ -307,7 +317,7 @@
status = readl(base + MMCISTATUS);
- DBG(host, "irq1 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
do {
unsigned long flags;
@@ -401,7 +411,7 @@
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
- DBG(host, "irq0 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
@@ -428,8 +438,8 @@
WARN_ON(host->mrq != NULL);
if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- mmc_hostname(mmc), mrq->data->blksz);
+ dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
@@ -582,8 +592,8 @@
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
- DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
- DBG(host, "revision = 0x%01x\n", host->hw_revision);
+ dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+ dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
@@ -608,7 +618,8 @@
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
- DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+ host->mclk);
}
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
@@ -619,6 +630,8 @@
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
+ dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
@@ -712,7 +725,7 @@
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+ dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 7cccc85..e22c3fa 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -46,7 +46,9 @@
clk |= 0x100;
}
- sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ if (host->set_clk_div)
+ host->set_clk_div(host->pdev, (clk>>22) & 1);
+
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
@@ -427,12 +429,13 @@
/* Power sequence - OFF -> ON -> UP */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
break;
case MMC_POWER_ON: /* power up SD bus */
-
- sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
break;
case MMC_POWER_UP: /* start bus clock */
tmio_mmc_clk_start(host);
@@ -485,21 +488,15 @@
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct mmc_host *mmc = platform_get_drvdata(dev);
- struct tmio_mmc_host *host = mmc_priv(mmc);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
- if (cell->enable) {
- ret = cell->enable(dev);
+ if (cell->resume) {
+ ret = cell->resume(dev);
if (ret)
goto out;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
mmc_resume_host(mmc);
out:
@@ -514,17 +511,16 @@
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct tmio_mmc_data *pdata;
- struct resource *res_ctl, *res_cnf;
+ struct resource *res_ctl;
struct tmio_mmc_host *host;
struct mmc_host *mmc;
int ret = -EINVAL;
- if (dev->num_resources != 3)
+ if (dev->num_resources != 2)
goto out;
res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
- res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
- if (!res_ctl || !res_cnf)
+ if (!res_ctl)
goto out;
pdata = cell->driver_data;
@@ -539,8 +535,12 @@
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->pdev = dev;
platform_set_drvdata(dev, mmc);
+ host->set_pwr = pdata->set_pwr;
+ host->set_clk_div = pdata->set_clk_div;
+
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res_ctl) >> 10;
@@ -548,10 +548,6 @@
if (!host->ctl)
goto host_free;
- host->cnf = ioremap(res_cnf->start, resource_size(res_cnf));
- if (!host->cnf)
- goto unmap_ctl;
-
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_max = pdata->hclk;
@@ -562,23 +558,9 @@
if (cell->enable) {
ret = cell->enable(dev);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
- /* Disable SD power during suspend */
- sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
-
- /* The below is required but why? FIXME */
- sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
-
- /* Power down SD bus*/
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
-
tmio_mmc_clk_stop(host);
reset(host);
@@ -586,14 +568,14 @@
if (ret >= 0)
host->irq = ret;
else
- goto unmap_cnf;
+ goto unmap_ctl;
disable_mmc_irqs(host, TMIO_MASK_ALL);
ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
mmc_add_host(mmc);
@@ -605,8 +587,6 @@
return 0;
-unmap_cnf:
- iounmap(host->cnf);
unmap_ctl:
iounmap(host->ctl);
host_free:
@@ -626,7 +606,6 @@
mmc_remove_host(mmc);
free_irq(host->irq, host);
iounmap(host->ctl);
- iounmap(host->cnf);
mmc_free_host(mmc);
}
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9fa9985..692dc23 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -11,26 +11,6 @@
#include <linux/highmem.h>
-#define CNF_CMD 0x04
-#define CNF_CTL_BASE 0x10
-#define CNF_INT_PIN 0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
#define CTL_SD_CMD 0x00
#define CTL_ARG_REG 0x04
#define CTL_STOP_INTERNAL_ACTION 0x08
@@ -110,7 +90,6 @@
struct tmio_mmc_host {
- void __iomem *cnf;
void __iomem *ctl;
unsigned long bus_shift;
struct mmc_command *cmd;
@@ -119,10 +98,16 @@
struct mmc_host *mmc;
int irq;
+ /* Callbacks for clock / power control */
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
+
/* pio related stuff */
struct scatterlist *sg_ptr;
unsigned int sg_len;
unsigned int sg_off;
+
+ struct platform_device *pdev;
};
#include <linux/io.h>
@@ -163,25 +148,6 @@
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
-static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
- u8 val)
-{
- writeb(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
- u16 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
- u32 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
- writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
-}
-
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index c37ee9e..39e1c0d 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -68,6 +68,7 @@
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
select PHYLIB
+ select MII
help
Say Y here if you want to use built-in Ethernet ports
on w90p910 processor.
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index c5721cb..cc9ed86 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -663,7 +663,7 @@
while (--i > 0)
if (DREG & CSR0_IDON)
break;
- if (i < 0 || (DREG & CSR0_ERR)) {
+ if (i <= 0 || (DREG & CSR0_ERR)) {
DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
dev->name, i, DREG ));
DREG = CSR0_STOP;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index c0451d7..ec52529 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1959,12 +1959,15 @@
return -ENOMEM;
for (i = first_dword; i < last_dword; i++) {
- if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword])))
- return -EIO;
+ if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) {
+ ret_val = -EIO;
+ goto free;
+ }
}
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
eeprom->len);
+free:
kfree(eeprom_buff);
return ret_val;
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 9c5a153..1a72ca0 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -990,7 +990,7 @@
goto error_tx_buf;
}
priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
- if (!priv->spi_tx_buf) {
+ if (!priv->spi_rx_buf) {
ret = -ENOMEM;
goto error_rx_buf;
}
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index af93216..0e79cef 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1325,8 +1325,7 @@
write_irq(dev, lp->chip_type, dev->irq);
ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
if (ret) {
- if (net_debug)
- printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
+ printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq);
goto bad_out;
}
}
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 34e0310..33c4fe2 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2711,6 +2711,8 @@
SET_ETHTOOL_OPS(ndev, ðtool_ops);
netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+ clk_enable(emac_clk);
+
/* register the network device */
SET_NETDEV_DEV(ndev, &pdev->dev);
rc = register_netdev(ndev);
@@ -2720,7 +2722,6 @@
goto netdev_reg_err;
}
- clk_enable(emac_clk);
/* MII/Phy intialisation, mdio bus registration */
emac_mii = mdiobus_alloc();
@@ -2760,6 +2761,7 @@
netdev_reg_err:
mdio_alloc_err:
+ clk_disable(emac_clk);
no_irq_res:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, res->end - res->start + 1);
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index b979464..02d67d0 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -237,6 +237,8 @@
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
/* check for link */
switch (hw->phy.media_type) {
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index cebbd90..d6ee28f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -582,7 +582,6 @@
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
u16 data);
-extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 3028f23..e2aa3b7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -224,6 +224,8 @@
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
? true : false;
+ /* Adaptive IFS not supported */
+ mac->adaptive_ifs = false;
/* check for link */
switch (hw->phy.media_type) {
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 2784cf4..eccf29b 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -818,6 +818,7 @@
u8 forced_speed_duplex;
+ bool adaptive_ifs;
bool arc_subsystem_valid;
bool autoneg;
bool autoneg_failed;
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9b09246..8b6ecd1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -138,6 +138,10 @@
#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
@@ -219,6 +223,7 @@
static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -270,7 +275,21 @@
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->id = e1000_phy_unknown;
- e1000e_get_phy_id(hw);
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+ /*
+ * In case the PHY needs to be in mdio slow mode (eg. 82577),
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ }
phy->type = e1000e_get_phy_type_from_id(phy->id);
switch (phy->type) {
@@ -292,6 +311,7 @@
break;
}
+out:
return ret_val;
}
@@ -454,6 +474,8 @@
mac->rar_entry_count--;
/* Set if manageability features are enabled. */
mac->arc_subsystem_valid = true;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
/* LED operations */
switch (mac->type) {
@@ -1074,16 +1096,44 @@
/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= HV_KMRN_MDIO_SLOW;
+
+ ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+ return ret_val;
+}
+
+/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
**/
static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
s32 ret_val = 0;
+ u16 phy_data;
if (hw->mac.type != e1000_pchlan)
return ret_val;
+ /* Set MDIO slow mode before any other MDIO access */
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
if (((hw->phy.type == e1000_phy_82577) &&
((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
@@ -1116,16 +1166,32 @@
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ hw->phy.ops.release(hw);
if (ret_val)
goto out;
- hw->phy.ops.release(hw);
/*
* Configure the K1 Si workaround during phy reset assuming there is
* link so that it disables K1 if link is in 1Gbps.
*/
ret_val = e1000_k1_gig_workaround_hv(hw, true);
+ if (ret_val)
+ goto out;
+ /* Workaround for link disconnects on a busy hub in half duplex */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
+release:
+ hw->phy.ops.release(hw);
out:
return ret_val;
}
@@ -1182,6 +1248,7 @@
/* Allow time for h/w to get to a quiescent state after reset */
mdelay(10);
+ /* Perform any necessary post-reset workarounds */
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
@@ -2482,6 +2549,10 @@
if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+ /* Perform any necessary post-reset workarounds */
+ if (hw->mac.type == e1000_pchlan)
+ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
if (ctrl & E1000_CTRL_PHY_RST)
ret_val = hw->phy.ops.get_cfg_done(hw);
@@ -2526,9 +2597,6 @@
kab |= E1000_KABGTXD_BGSQLBIAS;
ew32(KABGTXD, kab);
- if (hw->mac.type == e1000_pchlan)
- ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
-
out:
return ret_val;
}
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index a86c175..2fa9b36 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -125,6 +125,7 @@
void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
{
u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
/* Setup the receive address */
e_dbg("Programming MAC Address into RAR[0]\n");
@@ -133,12 +134,8 @@
/* Zero out the other (rar_entry_count - 1) receive addresses */
e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
- for (i = 1; i < rar_count; i++) {
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
- e1e_flush();
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0);
- e1e_flush();
- }
+ for (i = 1; i < rar_count; i++)
+ e1000e_rar_set(hw, mac_addr, i);
}
/**
@@ -164,10 +161,19 @@
rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
- rar_high |= E1000_RAH_AV;
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low);
- E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high);
+ /*
+ * Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ ew32(RAL(index), rar_low);
+ e1e_flush();
+ ew32(RAH(index), rar_high);
+ e1e_flush();
}
/**
@@ -1609,6 +1615,11 @@
{
struct e1000_mac_info *mac = &hw->mac;
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
mac->current_ifs_val = 0;
mac->ifs_min_val = IFS_MIN;
mac->ifs_max_val = IFS_MAX;
@@ -1617,6 +1628,8 @@
mac->in_ifs_mode = false;
ew32(AIT, 0);
+out:
+ return;
}
/**
@@ -1630,6 +1643,11 @@
{
struct e1000_mac_info *mac = &hw->mac;
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
if (mac->tx_packet_delta > MIN_NUM_XMITS) {
mac->in_ifs_mode = true;
@@ -1650,6 +1668,8 @@
ew32(AIT, 0);
}
}
+out:
+ return;
}
/**
@@ -2287,10 +2307,12 @@
s32 ret_val, hdr_csum, csum;
u8 i, len;
+ hw->mac.tx_pkt_filtering = true;
+
/* No manageability, no filtering */
if (!e1000e_check_mng_mode(hw)) {
hw->mac.tx_pkt_filtering = false;
- return 0;
+ goto out;
}
/*
@@ -2298,9 +2320,9 @@
* reason, disable filtering.
*/
ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val != 0) {
+ if (ret_val) {
hw->mac.tx_pkt_filtering = false;
- return ret_val;
+ goto out;
}
/* Read in the header. Length and offset are in dwords. */
@@ -2319,17 +2341,17 @@
*/
if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
hw->mac.tx_pkt_filtering = true;
- return 1;
+ goto out;
}
/* Cookie area is valid, make the final check for filtering. */
if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
hw->mac.tx_pkt_filtering = false;
- return 0;
+ goto out;
}
- hw->mac.tx_pkt_filtering = true;
- return 1;
+out:
+ return hw->mac.tx_pkt_filtering;
}
/**
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 762b697..c45965a 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3315,24 +3315,24 @@
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
- e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
- adapter->stats.scc += phy_data;
+ if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
+ adapter->stats.scc += phy_data;
e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
- e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
- adapter->stats.ecol += phy_data;
+ if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
+ adapter->stats.ecol += phy_data;
e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
- e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
- adapter->stats.mcc += phy_data;
+ if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
+ adapter->stats.mcc += phy_data;
e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
- e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
- adapter->stats.latecol += phy_data;
+ if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
+ adapter->stats.latecol += phy_data;
e1e_rphy(hw, HV_DC_UPPER, &phy_data);
- e1e_rphy(hw, HV_DC_LOWER, &phy_data);
- adapter->stats.dc += phy_data;
+ if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
+ adapter->stats.dc += phy_data;
} else {
adapter->stats.scc += er32(SCC);
adapter->stats.ecol += er32(ECOL);
@@ -3360,8 +3360,8 @@
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
- e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
- hw->mac.collision_delta = phy_data;
+ if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
+ hw->mac.collision_delta = phy_data;
} else {
hw->mac.collision_delta = er32(COLC);
}
@@ -3372,8 +3372,8 @@
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82577)) {
e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
- e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
- adapter->stats.tncrs += phy_data;
+ if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
+ adapter->stats.tncrs += phy_data;
} else {
if ((hw->mac.type != e1000_82574) &&
(hw->mac.type != e1000_82583))
@@ -4674,6 +4674,7 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ pci_save_state(pdev);
e1000e_disable_l1aspm(pdev);
err = pci_enable_device_mem(pdev);
@@ -4825,6 +4826,7 @@
} else {
pci_set_master(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 55a2c0a..7f3ceb9 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -152,32 +152,9 @@
if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
goto out;
- /*
- * If the PHY ID is still unknown, we may have an 82577
- * without link. We will try again after setting Slow MDIC
- * mode. No harm in trying again in this case since the PHY
- * ID is unknown at this point anyway.
- */
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- goto out;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
- phy->ops.release(hw);
-
retry_count++;
}
out:
- /* Revert to MDIO fast mode, if applicable */
- if (retry_count) {
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- return ret_val;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
- phy->ops.release(hw);
- }
-
return ret_val;
}
@@ -2791,38 +2768,6 @@
}
/**
- * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- * @hw: pointer to the HW structure
- * @slow: true for slow mode, false for normal mode
- *
- * Assumes semaphore already acquired.
- **/
-s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
-{
- s32 ret_val = 0;
- u16 data = 0;
-
- /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
- hw->phy.addr = 1;
- ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val)
- goto out;
-
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
- (0x2180 | (slow << 10)));
- if (ret_val)
- goto out;
-
- /* dummy read when reverting to fast mode - throw away result */
- if (!slow)
- ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
-out:
- return ret_val;
-}
-
-/**
* __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
@@ -2839,7 +2784,6 @@
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
@@ -2847,16 +2791,6 @@
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -2893,10 +2827,6 @@
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
@@ -2948,7 +2878,6 @@
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
@@ -2956,16 +2885,6 @@
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -3019,10 +2938,6 @@
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 25fabb3..d5160ed 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -46,6 +46,11 @@
#include "gianfar.h"
#include "fsl_pq_mdio.h"
+struct fsl_pq_mdio_priv {
+ void __iomem *map;
+ struct fsl_pq_mdio __iomem *regs;
+};
+
/*
* Write value to the PHY at mii_id at register regnum,
* on the bus attached to the local interface, which may be different from the
@@ -105,7 +110,9 @@
static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
{
- return (void __iomem __force *)bus->priv;
+ struct fsl_pq_mdio_priv *priv = bus->priv;
+
+ return priv->regs;
}
/*
@@ -266,6 +273,7 @@
{
struct device_node *np = ofdev->node;
struct device_node *tbi;
+ struct fsl_pq_mdio_priv *priv;
struct fsl_pq_mdio __iomem *regs = NULL;
void __iomem *map;
u32 __iomem *tbipa;
@@ -274,14 +282,19 @@
u64 addr = 0, size = 0;
int err = 0;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
new_bus = mdiobus_alloc();
if (NULL == new_bus)
- return -ENOMEM;
+ goto err_free_priv;
new_bus->name = "Freescale PowerQUICC MII Bus",
new_bus->read = &fsl_pq_mdio_read,
new_bus->write = &fsl_pq_mdio_write,
new_bus->reset = &fsl_pq_mdio_reset,
+ new_bus->priv = priv;
fsl_pq_mdio_bus_name(new_bus->id, np);
/* Set the PHY base address */
@@ -291,6 +304,7 @@
err = -ENOMEM;
goto err_free_bus;
}
+ priv->map = map;
if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
of_device_is_compatible(np, "fsl,gianfar-tbi") ||
@@ -298,8 +312,7 @@
of_device_is_compatible(np, "ucc_geth_phy"))
map -= offsetof(struct fsl_pq_mdio, miimcfg);
regs = map;
-
- new_bus->priv = (void __force *)regs;
+ priv->regs = regs;
new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
@@ -392,10 +405,11 @@
err_free_irqs:
kfree(new_bus->irq);
err_unmap_regs:
- iounmap(regs);
+ iounmap(priv->map);
err_free_bus:
kfree(new_bus);
-
+err_free_priv:
+ kfree(priv);
return err;
}
@@ -404,14 +418,16 @@
{
struct device *device = &ofdev->dev;
struct mii_bus *bus = dev_get_drvdata(device);
+ struct fsl_pq_mdio_priv *priv = bus->priv;
mdiobus_unregister(bus);
dev_set_drvdata(device, NULL);
- iounmap(fsl_pq_mdio_get_regs(bus));
+ iounmap(priv->map);
bus->priv = NULL;
mdiobus_free(bus);
+ kfree(priv);
return 0;
}
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index ae5f11c..bdadf3e 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -248,6 +248,7 @@
{
unsigned char *ptr;
struct bpqdev *bpq;
+ struct net_device *orig_dev;
int size;
/*
@@ -282,8 +283,9 @@
bpq = netdev_priv(dev);
+ orig_dev = dev;
if ((dev = bpq_get_ether_dev(dev)) == NULL) {
- dev->stats.tx_dropped++;
+ orig_dev->stats.tx_dropped++;
kfree_skb(skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 21b41f4..bfef0eb 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -1,7 +1,7 @@
################################################################################
#
# Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2009 Intel Corporation.
+# Copyright(c) 1999 - 2010 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8da8eb5..303e7bd 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 204177d..3103f41 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 5383405..b49bd6b 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 688b8ca..21f158f 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 27f3214..dfff0ff 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index a156228..9aea4f0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h
index 64a9fa1..5caafd4 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.h
+++ b/drivers/net/ixgbe/ixgbe_dcb.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index f302638..f0e9279 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h
index ebbe53c..cc728fa 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index ec8a2526..4f7a26a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h
index 9e5e282..0f3f791 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 3c7a79a..56f37f6 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0bd49d3..d77961f 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index da32a10..e9a20c8 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index de8ff53..abf4b2b 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 1a2ea62..9c9202f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -52,7 +52,7 @@
#define DRV_VERSION "2.0.44-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
+static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598] = &ixgbe_82598_info,
@@ -262,10 +262,12 @@
int reg_idx = tx_ring->reg_idx;
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
- if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
tc = reg_idx >> 2;
txoff = IXGBE_TFCS_TXOFF0;
- } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ break;
+ case ixgbe_mac_82599EB:
tc = 0;
txoff = IXGBE_TFCS_TXOFF;
if (dcb_i == 8) {
@@ -284,6 +286,9 @@
tc += (reg_idx - 96) >> 4;
}
}
+ break;
+ default:
+ tc = 0;
}
txoff <<= tc;
}
@@ -5571,6 +5576,10 @@
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i;
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 9ecad17..1c1efd3 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 9b700f5..9cf5f3b 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 84650c6..9eafddf 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 336e7c7..a8522bd 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -134,7 +134,7 @@
struct sk_buff *skb;
int i;
- lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL);
+ lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
/* allocate the tx and rx ring buffer descriptors. */
/* returns a virtual addres and a physical address. */
lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 291a505..3cf56d9 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1174,7 +1174,7 @@
return 0;
err_port:
- for (port = 1; port <= dev->caps.num_ports; port++)
+ for (--port; port >= 1; --port)
mlx4_cleanup_port_info(&priv->port[port]);
mlx4_cleanup_mcg_table(dev);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 1405a17..af67af5 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -656,6 +656,7 @@
struct sk_buff *skb;
int rx;
struct rx_desc *rx_desc;
+ int size;
skb = __skb_dequeue(&mp->rx_recycle);
if (skb == NULL)
@@ -678,10 +679,11 @@
rx_desc = rxq->rx_desc_area + rx;
+ size = skb->end - skb->data;
rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
- skb->data, mp->skb_size,
+ skb->data, size,
DMA_FROM_DEVICE);
- rx_desc->buf_size = mp->skb_size;
+ rx_desc->buf_size = size;
rxq->rx_skb[rx] = skb;
wmb();
rx_desc->cmd_sts = BUFFER_OWNED_BY_DMA | RX_ENABLE_INTERRUPT;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 76cd1f3..9bc5bd1d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -53,8 +53,8 @@
#define _NETXEN_NIC_LINUX_MAJOR 4
#define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 65
-#define NETXEN_NIC_LINUX_VERSIONID "4.0.65"
+#define _NETXEN_NIC_LINUX_SUBVERSION 72
+#define NETXEN_NIC_LINUX_VERSIONID "4.0.72"
#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index ddd704a..542f408 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -66,7 +66,7 @@
#define NETXEN_NIC_TEST_LEN ARRAY_SIZE(netxen_nic_gstrings_test)
-#define NETXEN_NIC_REGS_COUNT 42
+#define NETXEN_NIC_REGS_COUNT 30
#define NETXEN_NIC_REGS_LEN (NETXEN_NIC_REGS_COUNT * sizeof(__le32))
#define NETXEN_MAX_EEPROM_LEN 1024
@@ -312,150 +312,91 @@
return NETXEN_NIC_REGS_LEN;
}
-struct netxen_niu_regs {
- __u32 reg[NETXEN_NIC_REGS_COUNT];
-};
-
-static struct netxen_niu_regs niu_registers[] = {
- {
- /* GB Mode */
- {
- NETXEN_NIU_GB_SERDES_RESET,
- NETXEN_NIU_GB0_MII_MODE,
- NETXEN_NIU_GB1_MII_MODE,
- NETXEN_NIU_GB2_MII_MODE,
- NETXEN_NIU_GB3_MII_MODE,
- NETXEN_NIU_GB0_GMII_MODE,
- NETXEN_NIU_GB1_GMII_MODE,
- NETXEN_NIU_GB2_GMII_MODE,
- NETXEN_NIU_GB3_GMII_MODE,
- NETXEN_NIU_REMOTE_LOOPBACK,
- NETXEN_NIU_GB0_HALF_DUPLEX,
- NETXEN_NIU_GB1_HALF_DUPLEX,
- NETXEN_NIU_RESET_SYS_FIFOS,
- NETXEN_NIU_GB_CRC_DROP,
- NETXEN_NIU_GB_DROP_WRONGADDR,
- NETXEN_NIU_TEST_MUX_CTL,
-
- NETXEN_NIU_GB_MAC_CONFIG_0(0),
- NETXEN_NIU_GB_MAC_CONFIG_1(0),
- NETXEN_NIU_GB_HALF_DUPLEX_CTRL(0),
- NETXEN_NIU_GB_MAX_FRAME_SIZE(0),
- NETXEN_NIU_GB_TEST_REG(0),
- NETXEN_NIU_GB_MII_MGMT_CONFIG(0),
- NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
- NETXEN_NIU_GB_MII_MGMT_ADDR(0),
- NETXEN_NIU_GB_MII_MGMT_CTRL(0),
- NETXEN_NIU_GB_MII_MGMT_STATUS(0),
- NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
- NETXEN_NIU_GB_INTERFACE_CTRL(0),
- NETXEN_NIU_GB_INTERFACE_STATUS(0),
- NETXEN_NIU_GB_STATION_ADDR_0(0),
- NETXEN_NIU_GB_STATION_ADDR_1(0),
- -1,
- }
- },
- {
- /* XG Mode */
- {
- NETXEN_NIU_XG_SINGLE_TERM,
- NETXEN_NIU_XG_DRIVE_HI,
- NETXEN_NIU_XG_DRIVE_LO,
- NETXEN_NIU_XG_DTX,
- NETXEN_NIU_XG_DEQ,
- NETXEN_NIU_XG_WORD_ALIGN,
- NETXEN_NIU_XG_RESET,
- NETXEN_NIU_XG_POWER_DOWN,
- NETXEN_NIU_XG_RESET_PLL,
- NETXEN_NIU_XG_SERDES_LOOPBACK,
- NETXEN_NIU_XG_DO_BYTE_ALIGN,
- NETXEN_NIU_XG_TX_ENABLE,
- NETXEN_NIU_XG_RX_ENABLE,
- NETXEN_NIU_XG_STATUS,
- NETXEN_NIU_XG_PAUSE_THRESHOLD,
- NETXEN_NIU_XGE_CONFIG_0,
- NETXEN_NIU_XGE_CONFIG_1,
- NETXEN_NIU_XGE_IPG,
- NETXEN_NIU_XGE_STATION_ADDR_0_HI,
- NETXEN_NIU_XGE_STATION_ADDR_0_1,
- NETXEN_NIU_XGE_STATION_ADDR_1_LO,
- NETXEN_NIU_XGE_STATUS,
- NETXEN_NIU_XGE_MAX_FRAME_SIZE,
- NETXEN_NIU_XGE_PAUSE_FRAME_VALUE,
- NETXEN_NIU_XGE_TX_BYTE_CNT,
- NETXEN_NIU_XGE_TX_FRAME_CNT,
- NETXEN_NIU_XGE_RX_BYTE_CNT,
- NETXEN_NIU_XGE_RX_FRAME_CNT,
- NETXEN_NIU_XGE_AGGR_ERROR_CNT,
- NETXEN_NIU_XGE_MULTICAST_FRAME_CNT,
- NETXEN_NIU_XGE_UNICAST_FRAME_CNT,
- NETXEN_NIU_XGE_CRC_ERROR_CNT,
- NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR,
- NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR,
- NETXEN_NIU_XGE_LOCAL_ERROR_CNT,
- NETXEN_NIU_XGE_REMOTE_ERROR_CNT,
- NETXEN_NIU_XGE_CONTROL_CHAR_CNT,
- NETXEN_NIU_XGE_PAUSE_FRAME_CNT,
- -1,
- }
- }
-};
-
static void
netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- __u32 mode, *regs_buff = p;
- int i, window;
+ struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct nx_host_sds_ring *sds_ring;
+ u32 *regs_buff = p;
+ int ring, i = 0;
+ int port = adapter->physical_port;
memset(p, 0, NETXEN_NIC_REGS_LEN);
+
regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
(adapter->pdev)->device;
- /* which mode */
- regs_buff[0] = NXRD32(adapter, NETXEN_NIU_MODE);
- mode = regs_buff[0];
- /* Common registers to all the modes */
- regs_buff[2] = NXRD32(adapter, NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER);
- /* GB/XGB Mode */
- mode = (mode / 2) - 1;
- window = 0;
- if (mode <= 1) {
- for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) {
- /* GB: port specific registers */
- if (mode == 0 && i >= 19)
- window = adapter->physical_port *
- NETXEN_NIC_PORT_WINDOW;
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
- regs_buff[i] = NXRD32(adapter,
- niu_registers[mode].reg[i - 3] + window);
- }
+ regs_buff[i++] = NXRD32(adapter, CRB_CMDPEG_STATE);
+ regs_buff[i++] = NXRD32(adapter, CRB_RCVPEG_STATE);
+ regs_buff[i++] = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
+ regs_buff[i++] = NXRDIO(adapter, adapter->crb_int_state_reg);
+ regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+ regs_buff[i++] = NXRD32(adapter, NX_CRB_DEV_STATE);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_PEG_HALT_STATUS2);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_0+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_1+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_2+0x3c);
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_3+0x3c);
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+ regs_buff[i++] = NXRD32(adapter, NETXEN_CRB_PEG_NET_4+0x3c);
+ i += 2;
+
+ regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE_P3);
+ regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
+
+ } else {
+ i++;
+
+ regs_buff[i++] = NXRD32(adapter,
+ NETXEN_NIU_XGE_CONFIG_0+(0x10000*port));
+ regs_buff[i++] = NXRD32(adapter,
+ NETXEN_NIU_XGE_CONFIG_1+(0x10000*port));
+
+ regs_buff[i++] = NXRD32(adapter, CRB_XG_STATE);
+ regs_buff[i++] = NXRDIO(adapter,
+ adapter->tx_ring->crb_cmd_consumer);
+ }
+
+ regs_buff[i++] = NXRDIO(adapter, adapter->tx_ring->crb_cmd_producer);
+
+ regs_buff[i++] = NXRDIO(adapter,
+ recv_ctx->rds_rings[0].crb_rcv_producer);
+ regs_buff[i++] = NXRDIO(adapter,
+ recv_ctx->rds_rings[1].crb_rcv_producer);
+
+ regs_buff[i++] = adapter->max_sds_rings;
+
+ for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+ sds_ring = &(recv_ctx->sds_rings[ring]);
+ regs_buff[i++] = NXRDIO(adapter,
+ sds_ring->crb_sts_consumer);
}
}
static u32 netxen_nic_test_link(struct net_device *dev)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- __u32 status;
- int val;
+ u32 val, port;
- /* read which mode */
- if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
- if (adapter->phy_read &&
- adapter->phy_read(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
- &status) != 0)
- return -EIO;
- else {
- val = netxen_get_phy_link(status);
- return !val;
- }
- } else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
+ port = adapter->physical_port;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ val = NXRD32(adapter, CRB_XG_STATE_P3);
+ val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+ return (val == XG_LINK_UP_P3) ? 0 : 1;
+ } else {
val = NXRD32(adapter, CRB_XG_STATE);
+ val = (val >> port*8) & 0xff;
return (val == XG_LINK_UP) ? 0 : 1;
}
- return -EIO;
}
static int
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 2e364fe..85e28e6 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -345,8 +345,7 @@
void
netxen_pcie_sem_unlock(struct netxen_adapter *adapter, int sem)
{
- int val;
- val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
+ NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
}
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
@@ -691,6 +690,9 @@
struct list_head *head;
nx_mac_list_t *cur;
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
+
list_splice_tail_init(&adapter->mac_list, &del_list);
nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list);
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 02f8d4b..64cff68 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -184,6 +184,8 @@
tx_ring = adapter->tx_ring;
vfree(tx_ring->cmd_buf_arr);
+ kfree(tx_ring);
+ adapter->tx_ring = NULL;
}
int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
@@ -782,7 +784,7 @@
if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
return 1;
- old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ old_count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
for (i = 0; i < 10; i++) {
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 6cae26a..9f9d608 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -340,7 +340,7 @@
if (!(first_boot & 0x4)) {
first_boot |= 0x4;
NXWR32(adapter, NETXEN_PCIE_REG(0x4), first_boot);
- first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
+ NXRD32(adapter, NETXEN_PCIE_REG(0x4));
}
/* This is the first boot after power up */
@@ -1898,12 +1898,8 @@
linkup = (val == XG_LINK_UP_P3);
} else {
val = NXRD32(adapter, CRB_XG_STATE);
- if (adapter->ahw.port_type == NETXEN_NIC_GBE)
- linkup = (val >> port) & 1;
- else {
- val = (val >> port*8) & 0xff;
- linkup = (val == XG_LINK_UP);
- }
+ val = (val >> port*8) & 0xff;
+ linkup = (val == XG_LINK_UP);
}
netxen_advert_link_change(adapter, linkup);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ce58c4..2aed2b3 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -2844,7 +2844,7 @@
break;
udelay(1);
}
- if (limit < 0)
+ if (limit <= 0)
return -ENODEV;
return 0;
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 8a5ae3b..12e3233 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1402,7 +1402,6 @@
for (i = 0; i < 8; i++)
printk(KERN_CONT " %02X", ladrf[i]);
printk(KERN_CONT "\n");
- }
#endif
} /* BuildLAF */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 92ed3fb..776cad2 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1741,7 +1741,7 @@
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
@@ -1754,7 +1754,7 @@
MODULE_FIRMWARE("cis/PCMLM28.cis");
MODULE_FIRMWARE("cis/DP83903.cis");
MODULE_FIRMWARE("cis/LA-PCM.cis");
-MODULE_FIRMWARE("PE520.cis");
+MODULE_FIRMWARE("cis/PE520.cis");
MODULE_FIRMWARE("cis/NE2K.cis");
MODULE_FIRMWARE("cis/PE-200.cis");
MODULE_FIRMWARE("cis/tamarack.cis");
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index c13cf64..33c4b12 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -331,8 +331,8 @@
bool clk125en = true;
/* Abort if we are using an untested phy. */
- if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 ||
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+ if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
return;
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index bd4e8d7..e17b702 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -264,6 +264,8 @@
(phydev->phy_id & phydrv->phy_id_mask));
}
+#ifdef CONFIG_PM
+
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
struct device_driver *drv = phydev->dev.driver;
@@ -295,34 +297,88 @@
return true;
}
-/* Suspend and resume. Copied from platform_suspend and
- * platform_resume
- */
-static int mdio_bus_suspend(struct device * dev, pm_message_t state)
+static int mdio_bus_suspend(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ /*
+ * We must stop the state machine manually, otherwise it stops out of
+ * control, possibly with the phydev->lock held. Upon resume, netdev
+ * may call phy routines that try to grab the same lock, and that may
+ * lead to a deadlock.
+ */
+ if (phydev->attached_dev)
+ phy_stop_machine(phydev);
+
if (!mdio_bus_phy_may_suspend(phydev))
return 0;
+
return phydrv->suspend(phydev);
}
-static int mdio_bus_resume(struct device * dev)
+static int mdio_bus_resume(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
+ int ret;
if (!mdio_bus_phy_may_suspend(phydev))
- return 0;
- return phydrv->resume(phydev);
+ goto no_resume;
+
+ ret = phydrv->resume(phydev);
+ if (ret < 0)
+ return ret;
+
+no_resume:
+ if (phydev->attached_dev)
+ phy_start_machine(phydev, NULL);
+
+ return 0;
}
+static int mdio_bus_restore(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct net_device *netdev = phydev->attached_dev;
+ int ret;
+
+ if (!netdev)
+ return 0;
+
+ ret = phy_init_hw(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* The PHY needs to renegotiate. */
+ phydev->link = 0;
+ phydev->state = PHY_UP;
+
+ phy_start_machine(phydev, NULL);
+
+ return 0;
+}
+
+static struct dev_pm_ops mdio_bus_pm_ops = {
+ .suspend = mdio_bus_suspend,
+ .resume = mdio_bus_resume,
+ .freeze = mdio_bus_suspend,
+ .thaw = mdio_bus_resume,
+ .restore = mdio_bus_restore,
+};
+
+#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
+
+#else
+
+#define MDIO_BUS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
struct bus_type mdio_bus_type = {
.name = "mdio_bus",
.match = mdio_bus_match,
- .suspend = mdio_bus_suspend,
- .resume = mdio_bus_resume,
+ .pm = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b10fedd..8212b2b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -378,6 +378,20 @@
}
EXPORT_SYMBOL(phy_disconnect);
+int phy_init_hw(struct phy_device *phydev)
+{
+ int ret;
+
+ if (!phydev->drv || !phydev->drv->config_init)
+ return 0;
+
+ ret = phy_scan_fixups(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phydev->drv->config_init(phydev);
+}
+
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
@@ -425,21 +439,7 @@
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
- if (phydev->drv->config_init) {
- int err;
-
- err = phy_scan_fixups(phydev);
-
- if (err < 0)
- return err;
-
- err = phydev->drv->config_init(phydev);
-
- if (err < 0)
- return err;
- }
-
- return 0;
+ return phy_init_hw(phydev);
}
EXPORT_SYMBOL(phy_attach_direct);
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 20a7174..1c25709 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1293,7 +1293,7 @@
printk("Error code 0x%x\n", readl(®s->Fail1));
- index = (((readl(®s->EvtPrd) >> 8) & 0xff ) - 1) % EVT_RING_ENTRIES;
+ index = (((readl(®s->EvtPrd) >> 8) & 0xff) - 1) % TX_RING_ENTRIES;
cons = rrpriv->dirty_tx;
printk("TX ring index %i, TX consumer %i\n",
index, cons);
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 683353b..0d4eba7 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -142,8 +142,9 @@
if (spins != 0) {
--spins;
udelay(1);
- } else
- schedule();
+ } else {
+ schedule_timeout_uninterruptible(1);
+ }
time = get_seconds();
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index af39335..250c882 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -79,10 +79,14 @@
static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
{
int rc = 0;
- int devad = __ffs(efx->mdio.mmds);
+ int devad;
u16 physid1, physid2;
- if (efx->phy_type == PHY_TYPE_NONE)
+ if (efx->mdio.mode_support & MDIO_SUPPORTS_C45)
+ devad = __ffs(efx->mdio.mmds);
+ else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22)
+ devad = MDIO_DEVAD_NONE;
+ else
return 0;
mutex_lock(&efx->mac_lock);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index ca62850..7402b85 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -110,7 +110,7 @@
mdelay(1);
cnt--;
}
- if (cnt < 0)
+ if (cnt == 0)
printk(KERN_ERR "Device reset fail\n");
/* Table Init */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1c01b96..37f486b 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1844,7 +1844,8 @@
sky2->tx_cons = idx;
smp_mb();
- if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
+ /* Wake unless it's detached, and called e.g. from sky2_down() */
+ if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev))
netif_wake_queue(dev);
}
@@ -4684,6 +4685,7 @@
INIT_WORK(&hw->restart_work, sky2_restart);
pci_set_drvdata(pdev, hw);
+ pdev->d3_delay = 150;
return 0;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3a74d21..7f82b02 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4,7 +4,7 @@
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2005-2009 Broadcom Corporation.
+ * Copyright (C) 2005-2010 Broadcom Corporation.
*
* Firmware is:
* Derived from proprietary unpublished source code,
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.105"
-#define DRV_MODULE_RELDATE "December 2, 2009"
+#define DRV_MODULE_VERSION "3.106"
+#define DRV_MODULE_RELDATE "January 12, 2010"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1037,7 +1037,11 @@
else
tp->phy_addr = 1;
- is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0)
+ is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ else
+ is_serdes = tr32(TG3_CPMU_PHY_STRAP) &
+ TG3_CPMU_PHY_STRAP_IS_SERDES;
if (is_serdes)
tp->phy_addr += 7;
} else
@@ -4693,8 +4697,9 @@
(*post_ptr)++;
if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
- u32 idx = *post_ptr % TG3_RX_RING_SIZE;
- tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx);
+ tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+ tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+ tpr->rx_std_prod_idx);
work_mask &= ~RXD_OPAQUE_RING_STD;
rx_std_posted = 0;
}
@@ -7742,7 +7747,7 @@
((u64) tpr->rx_std_mapping >> 32));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tpr->rx_std_mapping & 0xffffffff));
- if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_BUFFER_DESC);
@@ -12122,7 +12127,8 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -13384,6 +13390,11 @@
if (err)
return err;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 ||
+ (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
+ return -ENOTSUPP;
+
/* Initialize data/descriptor byte/word swapping. */
val = tr32(GRC_MODE);
val &= GRC_MODE_HOST_STACKUP;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cd30889..8a16791 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -4,6 +4,7 @@
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
+ * Copyright (C) 2007-2010 Broadcom Corporation.
*/
#ifndef _T3_H
@@ -1054,6 +1055,8 @@
#define CPMU_MUTEX_REQ_DRIVER 0x00001000
#define TG3_CPMU_MUTEX_GNT 0x00003660
#define CPMU_MUTEX_GNT_DRIVER 0x00001000
+#define TG3_CPMU_PHY_STRAP 0x00003664
+#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020
/* 0x3664 --> 0x3800 unused */
/* Mbuf cluster free registers */
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 1cc8cf4..516713f 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -101,6 +101,10 @@
If in doubt, say Y.
+config TULIP_DM910X
+ def_bool y
+ depends on TULIP && SPARC
+
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on PCI || EISA
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index ad63621..6f44ebf 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -92,6 +92,10 @@
#include <asm/uaccess.h>
#include <asm/irq.h>
+#ifdef CONFIG_TULIP_DM910X
+#include <linux/of.h>
+#endif
+
/* Board/System/Debug information/definition ---------------- */
#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
@@ -377,6 +381,23 @@
if (!printed_version++)
printk(version);
+ /*
+ * SPARC on-board DM910x chips should be handled by the main
+ * tulip driver, except for early DM9100s.
+ */
+#ifdef CONFIG_TULIP_DM910X
+ if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) ||
+ ent->driver_data == PCI_DM9102_ID) {
+ struct device_node *dp = pci_device_to_OF_node(pdev);
+
+ if (dp && of_get_property(dp, "local-mac-address", NULL)) {
+ printk(KERN_INFO DRV_NAME
+ ": skipping on-board DM910x (use tulip)\n");
+ return -ENODEV;
+ }
+ }
+#endif
+
/* Init network device */
dev = alloc_etherdev(sizeof(*db));
if (dev == NULL)
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 0fa3140..595777d 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -196,9 +196,13 @@
| HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task },
/* DM910X */
+#ifdef CONFIG_TULIP_DM910X
{ "Davicom DM9102/DM9102A", 128, 0x0001ebef,
HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
tulip_timer, tulip_media_task },
+#else
+ { NULL },
+#endif
/* RS7112 */
{ "Conexant LANfinity", 256, 0x0001ebef,
@@ -228,8 +232,10 @@
{ 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
{ 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
+#ifdef CONFIG_TULIP_DM910X
{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+#endif
{ 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
{ 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
@@ -1299,18 +1305,30 @@
}
/*
- * Early DM9100's need software CRC and the DMFE driver
+ * DM910x chips should be handled by the dmfe driver, except
+ * on-board chips on SPARC systems. Also, early DM9100s need
+ * software CRC which only the dmfe driver supports.
*/
- if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
- {
- /* Read Chip revision */
- if (pdev->revision < 0x30)
- {
- printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
+#ifdef CONFIG_TULIP_DM910X
+ if (chip_idx == DM910X) {
+ struct device_node *dp;
+
+ if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
+ pdev->revision < 0x30) {
+ printk(KERN_INFO PFX
+ "skipping early DM9100 with Crc bug (use dmfe)\n");
+ return -ENODEV;
+ }
+
+ dp = pci_device_to_OF_node(pdev);
+ if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
+ printk(KERN_INFO PFX
+ "skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
+#endif
/*
* Looks for early PCI chipsets where people report hangs
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 41ad2f3..96bdc0b 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3607,6 +3607,7 @@
if (!netif_running(ndev))
return 0;
+ netif_device_detach(ndev);
napi_disable(&ugeth->napi);
/*
@@ -3665,7 +3666,7 @@
phy_start(ugeth->phydev);
napi_enable(&ugeth->napi);
- netif_start_queue(ndev);
+ netif_device_attach(ndev);
return 0;
}
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index a007e2a..ef1fbeb 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -838,13 +838,13 @@
using the maximum is
easier */
#define UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32
-#define UCC_GETH_SCHEDULER_ALIGNMENT 4 /* This is a guess */
+#define UCC_GETH_SCHEDULER_ALIGNMENT 8 /* This is a guess */
#define UCC_GETH_TX_STATISTICS_ALIGNMENT 4 /* This is a guess */
#define UCC_GETH_RX_STATISTICS_ALIGNMENT 4 /* This is a guess */
#define UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT 64
#define UCC_GETH_RX_BD_QUEUES_ALIGNMENT 8 /* This is a guess */
#define UCC_GETH_RX_PREFETCHED_BDS_ALIGNMENT 128 /* This is a guess */
-#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4 /* This
+#define UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 8 /* This
is a
guess
*/
@@ -899,16 +899,17 @@
#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size
*/
#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT 128
+#define UCC_GETH_UTFTT_INIT 512
/* Gigabit Ethernet (1000 Mbps) */
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual
FIFO size */
#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */
#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */
-#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual
+#define UCC_GETH_UTFS_GIGA_INIT 4096/*2048*/ /* Tx virtual
FIFO size */
-#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */
-#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */
+#define UCC_GETH_UTFET_GIGA_INIT 2048/*1024*/ /* 1/2 utfs */
+#define UCC_GETH_UTFTT_GIGA_INIT 4096/*0x40*/ /* Tx virtual
+ FIFO size */
#define UCC_GETH_REMODER_INIT 0 /* bits that must be
set */
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index f78f090..6895f15 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -286,6 +286,7 @@
u8 usb_gone;
struct work_struct async_get_intf;
struct work_struct async_put_intf;
+ struct work_struct reset_device;
struct usb_device *usb;
struct usb_interface *interface;
@@ -332,7 +333,8 @@
/* Helper functions */
static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
struct usb_device *usb, gfp_t gfp);
-static void log_usb_status(int status, const char *function);
+static void handle_usb_error(int status, const char *function,
+ struct hso_device *hso_dev);
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
int type, int dir);
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
@@ -350,6 +352,7 @@
static int hso_put_activity(struct hso_device *hso_dev);
static int hso_get_activity(struct hso_device *hso_dev);
static void tiocmget_intr_callback(struct urb *urb);
+static void reset_device(struct work_struct *data);
/*****************************************************************************/
/* Helping functions */
/*****************************************************************************/
@@ -461,10 +464,17 @@
{USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */
{USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7701)},
+ {USB_DEVICE(0x0af0, 0x7706)},
{USB_DEVICE(0x0af0, 0x7801)},
{USB_DEVICE(0x0af0, 0x7901)},
+ {USB_DEVICE(0x0af0, 0x7A01)},
+ {USB_DEVICE(0x0af0, 0x7A05)},
{USB_DEVICE(0x0af0, 0x8200)},
{USB_DEVICE(0x0af0, 0x8201)},
+ {USB_DEVICE(0x0af0, 0x8300)},
+ {USB_DEVICE(0x0af0, 0x8302)},
+ {USB_DEVICE(0x0af0, 0x8304)},
+ {USB_DEVICE(0x0af0, 0x8400)},
{USB_DEVICE(0x0af0, 0xd035)},
{USB_DEVICE(0x0af0, 0xd055)},
{USB_DEVICE(0x0af0, 0xd155)},
@@ -473,6 +483,8 @@
{USB_DEVICE(0x0af0, 0xd157)},
{USB_DEVICE(0x0af0, 0xd257)},
{USB_DEVICE(0x0af0, 0xd357)},
+ {USB_DEVICE(0x0af0, 0xd058)},
+ {USB_DEVICE(0x0af0, 0xc100)},
{}
};
MODULE_DEVICE_TABLE(usb, hso_ids);
@@ -655,8 +667,8 @@
spin_unlock_irqrestore(&serial_table_lock, flags);
}
-/* log a meaningful explanation of an USB status */
-static void log_usb_status(int status, const char *function)
+static void handle_usb_error(int status, const char *function,
+ struct hso_device *hso_dev)
{
char *explanation;
@@ -685,10 +697,20 @@
case -EMSGSIZE:
explanation = "internal error";
break;
+ case -EILSEQ:
+ case -EPROTO:
+ case -ETIME:
+ case -ETIMEDOUT:
+ explanation = "protocol error";
+ if (hso_dev)
+ schedule_work(&hso_dev->reset_device);
+ break;
default:
explanation = "unknown status";
break;
}
+
+ /* log a meaningful explanation of an USB status */
D1("%s: received USB status - %s (%d)", function, explanation, status);
}
@@ -762,7 +784,7 @@
/* log status, but don't act on it, we don't need to resubmit anything
* anyhow */
if (status)
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, odev->parent);
hso_put_activity(odev->parent);
@@ -806,7 +828,7 @@
result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
if (result) {
dev_warn(&odev->parent->interface->dev,
- "failed mux_bulk_tx_urb %d", result);
+ "failed mux_bulk_tx_urb %d\n", result);
net->stats.tx_errors++;
netif_start_queue(net);
} else {
@@ -998,7 +1020,7 @@
/* is al ok? (Filip: Who's Al ?) */
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, odev->parent);
return;
}
@@ -1019,7 +1041,8 @@
if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
u32 rest;
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
- rest = urb->actual_length % odev->in_endp->wMaxPacketSize;
+ rest = urb->actual_length %
+ le16_to_cpu(odev->in_endp->wMaxPacketSize);
if (((rest == 5) || (rest == 6)) &&
!memcmp(((u8 *) urb->transfer_buffer) +
urb->actual_length - 4, crc_check, 4)) {
@@ -1053,7 +1076,7 @@
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_warn(&odev->parent->interface->dev,
- "%s failed submit mux_bulk_rx_urb %d", __func__,
+ "%s failed submit mux_bulk_rx_urb %d\n", __func__,
result);
}
@@ -1207,7 +1230,7 @@
D1("serial == NULL");
return;
} else if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
return;
}
@@ -1225,7 +1248,7 @@
u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
rest =
urb->actual_length %
- serial->in_endp->wMaxPacketSize;
+ le16_to_cpu(serial->in_endp->wMaxPacketSize);
if (((rest == 5) || (rest == 6)) &&
!memcmp(((u8 *) urb->transfer_buffer) +
urb->actual_length - 4, crc_check, 4)) {
@@ -1513,7 +1536,7 @@
if (!serial)
return;
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
return;
}
tiocmget = serial->tiocmget;
@@ -1700,6 +1723,10 @@
D1("no tty structures");
return -EINVAL;
}
+
+ if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
+ return -EINVAL;
+
if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
spin_lock_irqsave(&serial->serial_lock, flags);
@@ -1838,7 +1865,7 @@
result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
if (result) {
dev_err(&ctrl_urb->dev->dev,
- "%s failed submit ctrl_urb %d type %d", __func__,
+ "%s failed submit ctrl_urb %d type %d\n", __func__,
result, type);
return result;
}
@@ -1888,7 +1915,7 @@
/* status check */
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, NULL);
return;
}
D4("\n--- Got intr callback 0x%02X ---", status);
@@ -1905,18 +1932,18 @@
if (serial != NULL) {
D1("Pending read interrupt on port %d\n", i);
spin_lock(&serial->serial_lock);
- if (serial->rx_state == RX_IDLE) {
+ if (serial->rx_state == RX_IDLE &&
+ serial->open_count > 0) {
/* Setup and send a ctrl req read on
* port i */
- if (!serial->rx_urb_filled[0]) {
+ if (!serial->rx_urb_filled[0]) {
serial->rx_state = RX_SENT;
hso_mux_serial_read(serial);
} else
serial->rx_state = RX_PENDING;
-
} else {
- D1("Already pending a read on "
- "port %d\n", i);
+ D1("Already a read pending on "
+ "port %d or port not open\n", i);
}
spin_unlock(&serial->serial_lock);
}
@@ -1958,7 +1985,7 @@
tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
tty_kref_put(tty);
return;
}
@@ -2014,7 +2041,7 @@
tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
- log_usb_status(status, __func__);
+ handle_usb_error(status, __func__, serial->parent);
tty_kref_put(tty);
return;
}
@@ -2358,12 +2385,12 @@
serial->tx_data_length = tx_size;
serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_data) {
- dev_err(dev, "%s - Out of memory", __func__);
+ dev_err(dev, "%s - Out of memory\n", __func__);
goto exit;
}
serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_buffer) {
- dev_err(dev, "%s - Out of memory", __func__);
+ dev_err(dev, "%s - Out of memory\n", __func__);
goto exit;
}
@@ -2391,6 +2418,7 @@
INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
+ INIT_WORK(&hso_dev->reset_device, reset_device);
return hso_dev;
}
@@ -2831,13 +2859,14 @@
mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!mux->shared_intr_urb) {
- dev_err(&interface->dev, "Could not allocate intr urb?");
+ dev_err(&interface->dev, "Could not allocate intr urb?\n");
goto exit;
}
- mux->shared_intr_buf = kzalloc(mux->intr_endp->wMaxPacketSize,
- GFP_KERNEL);
+ mux->shared_intr_buf =
+ kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
+ GFP_KERNEL);
if (!mux->shared_intr_buf) {
- dev_err(&interface->dev, "Could not allocate intr buf?");
+ dev_err(&interface->dev, "Could not allocate intr buf?\n");
goto exit;
}
@@ -3132,6 +3161,26 @@
return result;
}
+static void reset_device(struct work_struct *data)
+{
+ struct hso_device *hso_dev =
+ container_of(data, struct hso_device, reset_device);
+ struct usb_device *usb = hso_dev->usb;
+ int result;
+
+ if (hso_dev->usb_gone) {
+ D1("No reset during disconnect\n");
+ } else {
+ result = usb_lock_device_for_reset(usb, hso_dev->interface);
+ if (result < 0)
+ D1("unable to lock device for reset: %d\n", result);
+ else {
+ usb_reset_device(usb);
+ usb_unlock_device(usb);
+ }
+ }
+}
+
static void hso_serial_ref_free(struct kref *ref)
{
struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
@@ -3232,13 +3281,13 @@
usb_rcvintpipe(usb,
shared_int->intr_endp->bEndpointAddress & 0x7F),
shared_int->shared_intr_buf,
- shared_int->intr_endp->wMaxPacketSize,
+ 1,
intr_callback, shared_int,
shared_int->intr_endp->bInterval);
result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
if (result)
- dev_warn(&usb->dev, "%s failed mux_intr_urb %d", __func__,
+ dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
result);
return result;
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index f14d225..fd19db0 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -270,7 +270,7 @@
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
- if (i < MII_TIMEOUT) {
+ if (i <= MII_TIMEOUT) {
get_registers(dev, PHYDAT, 2, data);
*reg = data[0] | (data[1] << 8);
return 0;
@@ -295,7 +295,7 @@
get_registers(dev, PHYCNT, 1, data);
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
- if (i < MII_TIMEOUT)
+ if (i <= MII_TIMEOUT)
return 0;
else
return 1;
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 4ceb441..c93f58f 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2237,8 +2237,6 @@
/* Ensure chip is running */
pci_set_power_state(vptr->pdev, PCI_D0);
- velocity_give_many_rx_descs(vptr);
-
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED,
@@ -2250,6 +2248,8 @@
goto out;
}
+ velocity_give_many_rx_descs(vptr);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
napi_enable(&vptr->napi);
@@ -2339,10 +2339,10 @@
dev->mtu = new_mtu;
- velocity_give_many_rx_descs(vptr);
-
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+ velocity_give_many_rx_descs(vptr);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 0fdfd58..b9685e8 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -310,7 +310,7 @@
dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
rx_priv->data_size, PCI_DMA_FROMDEVICE);
- if (dma_addr == 0) {
+ if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) {
ring->stats.pci_map_fail++;
return -EIO;
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 5d1c867..6a3f4da 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -97,7 +97,7 @@
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
int ret;
u16 val;
- u32 cksum, offset;
+ u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
/*
* Read values from EEPROM and store them in the capability structure
@@ -116,12 +116,38 @@
* Validate the checksum of the EEPROM date. There are some
* devices with invalid EEPROMs.
*/
- for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+ if (val) {
+ eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+ AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+ eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+ /*
+ * Fail safe check to prevent stupid loops due
+ * to busted EEPROMs. XXX: This value is likely too
+ * big still, waiting on a better value.
+ */
+ if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+ ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+ "%d (0x%04x) max expected: %d (0x%04x)\n",
+ eep_max, eep_max,
+ 3 * AR5K_EEPROM_INFO_MAX,
+ 3 * AR5K_EEPROM_INFO_MAX);
+ return -EIO;
+ }
+ }
+
+ for (cksum = 0, offset = 0; offset < eep_max; offset++) {
AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
cksum ^= val;
}
if (cksum != AR5K_EEPROM_INFO_CKSUM) {
- ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+ "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+ cksum, eep_max,
+ eep_max == AR5K_EEPROM_INFO_MAX ?
+ "default size" : "custom size");
return -EIO;
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 0123f35..473a483 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -37,6 +37,14 @@
#define AR5K_EEPROM_RFKILL_POLARITY_S 1
#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12
+
#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 03a1106..5774cea 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -25,7 +25,7 @@
config ATH9K_DEBUGFS
bool "Atheros ath9k debugging"
- depends on ATH9K
+ depends on ATH9K && DEBUG_FS
---help---
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e2cef2f..1597a42 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -33,11 +33,11 @@
/* Macro to expand scalars to 64-bit objects */
-#define ito64(x) (sizeof(x) == 8) ? \
+#define ito64(x) (sizeof(x) == 1) ? \
(((unsigned long long int)(x)) & (0xff)) : \
- (sizeof(x) == 16) ? \
+ (sizeof(x) == 2) ? \
(((unsigned long long int)(x)) & 0xffff) : \
- ((sizeof(x) == 32) ? \
+ ((sizeof(x) == 4) ? \
(((unsigned long long int)(x)) & 0xffffffff) : \
(unsigned long long int)(x))
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 484c5fd..9b4b8b5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1961,7 +1961,7 @@
struct ieee80211_tx_info *info;
struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->u.status);
- int tid = MAX_TID_COUNT;
+ int uninitialized_var(tid);
int sta_id;
int freed;
u8 *qc = NULL;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 574d366..5461f10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2344,6 +2344,21 @@
IWL_DEBUG_MAC80211(priv, "leave\n");
}
+static inline void iwl_set_no_assoc(struct iwl_priv *priv)
+{
+ priv->assoc_id = 0;
+ iwl_led_disassociate(priv);
+ /*
+ * inform the ucode that there is no longer an
+ * association and that no more packets should be
+ * sent
+ */
+ priv->staging_rxon.filter_flags &=
+ ~RXON_FILTER_ASSOC_MSK;
+ priv->staging_rxon.assoc_id = 0;
+ iwlcore_commit_rxon(priv);
+}
+
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -2475,20 +2490,8 @@
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv);
- } else {
- priv->assoc_id = 0;
- iwl_led_disassociate(priv);
-
- /*
- * inform the ucode that there is no longer an
- * association and that no more packets should be
- * send
- */
- priv->staging_rxon.filter_flags &=
- ~RXON_FILTER_ASSOC_MSK;
- priv->staging_rxon.assoc_id = 0;
- iwlcore_commit_rxon(priv);
- }
+ } else
+ iwl_set_no_assoc(priv);
}
if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2503,12 +2506,14 @@
}
}
- if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
- vif->bss_conf.enable_beacon) {
- memcpy(priv->staging_rxon.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- iwlcore_config_ap(priv);
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ if (vif->bss_conf.enable_beacon) {
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+ iwlcore_config_ap(priv);
+ } else
+ iwl_set_no_assoc(priv);
}
mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 165d1f6..3822cf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -711,7 +711,7 @@
extern int iwl_queue_space(const struct iwl_queue *q);
static inline int iwl_queue_used(const struct iwl_queue *q, int i)
{
- return q->write_ptr > q->read_ptr ?
+ return q->write_ptr >= q->read_ptr ?
(i >= q->read_ptr && i < q->write_ptr) :
!(i < q->read_ptr && i >= q->write_ptr);
}
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 59d4915..59f9210 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3157,8 +3157,10 @@
/* Clear unsupported feature flags */
*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
- if (mwl8k_fw_lock(hw))
+ if (mwl8k_fw_lock(hw)) {
+ kfree(cmd);
return;
+ }
if (priv->sniffer_enabled) {
mwl8k_enable_sniffer(hw, 0);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 27bf887..9deae41 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -340,7 +340,7 @@
rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4d841c0..dcfc8c2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -113,6 +113,12 @@
( ((unsigned long)((__skb)->data + (__header))) & 3 )
/*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */
+
+/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 06c43ca..265e66d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -686,7 +686,17 @@
/*
* Initialize extra TX headroom required.
*/
- rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+ rt2x00dev->hw->extra_tx_headroom =
+ max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+ rt2x00dev->ops->extra_tx_headroom);
+
+ /*
+ * Take TX headroom required for alignment into account.
+ */
+ if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+ else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
/*
* Register HW.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 239afc7..9915a09 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -104,7 +104,7 @@
* is also mapped to the DMA so it can be used for transfering
* additional descriptor information to the hardware.
*/
- skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->skb_dma =
dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -112,7 +112,7 @@
/*
* Restore data pointer to original location again.
*/
- skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
}
@@ -134,7 +134,7 @@
* by the driver, but it was actually mapped to DMA.
*/
dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
- skb->len + rt2x00dev->hw->extra_tx_headroom,
+ skb->len + rt2x00dev->ops->extra_tx_headroom,
DMA_TO_DEVICE);
skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
}
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8ebf5c3..f14deb0 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -987,12 +987,13 @@
changed_flags &= SUPPORTED_FIF_FLAGS;
*new_flags &= SUPPORTED_FIF_FLAGS;
- /* changed_flags is always populated but this driver
- * doesn't support all FIF flags so its possible we don't
- * need to do anything */
- if (!changed_flags)
- return;
-
+ /*
+ * If multicast parameter (as returned by zd_op_prepare_multicast)
+ * has changed, no bit in changed_flags is set. To handle this
+ * situation, we do not return if changed_flags is 0. If we do so,
+ * we will have some issue with IPv6 which uses multicast for link
+ * layer address resolution.
+ */
if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
zd_mc_add_all(&hash);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index c5df94e..807224e 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -75,7 +75,8 @@
int len;
#ifdef CONFIG_NUMA
- mask = cpumask_of_node(dev_to_node(dev));
+ mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+ cpumask_of_node(dev_to_node(dev));
#else
mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
#endif
@@ -93,7 +94,8 @@
int len;
#ifdef CONFIG_NUMA
- mask = cpumask_of_node(dev_to_node(dev));
+ mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+ cpumask_of_node(dev_to_node(dev));
#else
mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
#endif
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 0906599..315fea4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -29,7 +29,17 @@
};
EXPORT_SYMBOL_GPL(pci_power_names);
-unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
+unsigned int pci_pm_d3_delay;
+
+static void pci_dev_d3_sleep(struct pci_dev *dev)
+{
+ unsigned int delay = dev->d3_delay;
+
+ if (delay < pci_pm_d3_delay)
+ delay = pci_pm_d3_delay;
+
+ msleep(delay);
+}
#ifdef CONFIG_PCI_DOMAINS
int pci_domains_supported = 1;
@@ -522,7 +532,7 @@
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
@@ -1409,6 +1419,7 @@
}
dev->pm_cap = pm;
+ dev->d3_delay = PCI_PM_D3_WAIT;
dev->d1_support = false;
dev->d2_support = false;
@@ -2247,12 +2258,12 @@
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D3hot;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
csr &= ~PCI_PM_CTRL_STATE_MASK;
csr |= PCI_D0;
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
- msleep(pci_pm_d3_delay);
+ pci_dev_d3_sleep(dev);
return 0;
}
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index 797d478..8c30a95 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -321,7 +321,7 @@
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever;
+ u32 sever, mask;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -374,6 +374,24 @@
err->header_log2 = einj->header_log2;
err->header_log3 = einj->header_log3;
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask);
+ if (einj->cor_status && !(einj->cor_status & ~mask)) {
+ ret = -EINVAL;
+ printk(KERN_WARNING "The correctable error(s) is masked "
+ "by device\n");
+ spin_unlock_irqrestore(&inject_lock, flags);
+ goto out_put;
+ }
+
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask);
+ if (einj->uncor_status && !(einj->uncor_status & ~mask)) {
+ ret = -EINVAL;
+ printk(KERN_WARNING "The uncorrectable error(s) is masked "
+ "by device\n");
+ spin_unlock_irqrestore(&inject_lock, flags);
+ goto out_put;
+ }
+
rperr = __find_aer_error_by_dev(rpdev);
if (!rperr) {
rperr = rperr_alloc;
@@ -413,8 +431,14 @@
if (ret)
goto out_put;
- if (find_aer_device(rpdev, &edev))
+ if (find_aer_device(rpdev, &edev)) {
+ if (!get_service_data(edev)) {
+ printk(KERN_WARNING "AER service is not initialized\n");
+ ret = -EINVAL;
+ goto out_put;
+ }
aer_irq(-1, edev);
+ }
else
ret = -EINVAL;
out_put:
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 413262e..b174188 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -27,7 +27,7 @@
*/
static void release_pcie_device(struct device *dev)
{
- kfree(to_pcie_device(dev));
+ kfree(to_pcie_device(dev));
}
/**
@@ -346,12 +346,11 @@
{
struct pcie_port_service_driver *service_driver;
- if ((dev->bus == &pcie_port_bus_type) &&
- (dev->driver)) {
- service_driver = to_service_driver(dev->driver);
- if (service_driver->suspend)
- service_driver->suspend(to_pcie_device(dev));
- }
+ if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+ service_driver = to_service_driver(dev->driver);
+ if (service_driver->suspend)
+ service_driver->suspend(to_pcie_device(dev));
+ }
return 0;
}
@@ -494,6 +493,7 @@
return driver_register(&new->driver);
}
+EXPORT_SYMBOL(pcie_port_service_register);
/**
* pcie_port_service_unregister - unregister PCI Express port service driver
@@ -503,6 +503,4 @@
{
driver_unregister(&drv->driver);
}
-
-EXPORT_SYMBOL(pcie_port_service_register);
EXPORT_SYMBOL(pcie_port_service_unregister);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 34d6517..13c8972 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -63,7 +63,7 @@
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
- * If detected invokes the pcie_port_device_register() method for
+ * If detected invokes the pcie_port_device_register() method for
* this port device.
*
*/
@@ -78,7 +78,7 @@
(dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)))
return -ENODEV;
- if (!dev->irq && dev->pin) {
+ if (!dev->irq && dev->pin) {
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
}
@@ -91,7 +91,7 @@
return 0;
}
-static void pcie_portdrv_remove (struct pci_dev *dev)
+static void pcie_portdrv_remove(struct pci_dev *dev)
{
pcie_port_device_remove(dev);
pci_disable_device(dev);
@@ -129,14 +129,13 @@
static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
enum pci_channel_state error)
{
- struct aer_broadcast_data result_data =
- {error, PCI_ERS_RESULT_CAN_RECOVER};
- int retval;
+ struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER};
+ int ret;
/* can not fail */
- retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter);
+ ret = device_for_each_child(&dev->dev, &data, error_detected_iter);
- return result_data.result;
+ return data.result;
}
static int mmio_enabled_iter(struct device *device, void *data)
@@ -290,7 +289,7 @@
return retval;
}
-static void __exit pcie_portdrv_exit(void)
+static void __exit pcie_portdrv_exit(void)
{
pci_unregister_driver(&pcie_portdriver);
pcie_port_bus_unregister();
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 5b648f0..ad4c414d 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -393,8 +393,6 @@
} else
printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
eventcode);
-
- kfree(obj);
}
static int __init hp_wmi_input_setup(void)
diff --git a/drivers/power/pmu_battery.c b/drivers/power/pmu_battery.c
index 9346a86..9c87ad5 100644
--- a/drivers/power/pmu_battery.c
+++ b/drivers/power/pmu_battery.c
@@ -89,6 +89,8 @@
case POWER_SUPPLY_PROP_STATUS:
if (pbi->flags & PMU_BATT_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (pmu_power_flags & PMU_PWR_AC_PRESENT)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index c8c1232..e9aa814 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1096,9 +1096,9 @@
#define cmos_pnp_resume NULL
#endif
-static void cmos_pnp_shutdown(struct device *pdev)
+static void cmos_pnp_shutdown(struct pnp_dev *pnp)
{
- if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pnp->dev))
return;
cmos_do_shutdown();
@@ -1117,15 +1117,12 @@
.id_table = rtc_ids,
.probe = cmos_pnp_probe,
.remove = __exit_p(cmos_pnp_remove),
+ .shutdown = cmos_pnp_shutdown,
/* flag ensures resume() gets called, and stops syslog spam */
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
.suspend = cmos_pnp_suspend,
.resume = cmos_pnp_resume,
- .driver = {
- .name = (char *)driver_name,
- .shutdown = cmos_pnp_shutdown,
- }
};
#endif /* CONFIG_PNP */
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 0264b11..c256aac 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -7,6 +7,9 @@
*
* Copyright 2006 (c) MontaVista Software, Inc.
*
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -18,6 +21,9 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/version.h>
/*
* Register definitions
@@ -30,35 +36,207 @@
#define RTC_RIS 0x14 /* Raw interrupt status register */
#define RTC_MIS 0x18 /* Masked interrupt status register */
#define RTC_ICR 0x1c /* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR 0x20 /* Timer data read register */
+#define RTC_TLR 0x24 /* Timer data load register */
+#define RTC_TCR 0x28 /* Timer control register */
+#define RTC_YDR 0x30 /* Year data read register */
+#define RTC_YMR 0x34 /* Year match register */
+#define RTC_YLR 0x38 /* Year data load register */
+
+#define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */
+
+#define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI (1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI (1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
struct pl031_local {
struct rtc_device *rtc;
void __iomem *base;
+ u8 hw_designer;
+ u8 hw_revision:4;
};
-static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+static int pl031_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
{
- struct rtc_device *rtc = dev_id;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long imsc;
- rtc_update_irq(rtc, 1, RTC_AF);
+ /* Clear any pending alarm interrupts. */
+ writel(RTC_BIT_AI, ldata->base + RTC_ICR);
- return IRQ_HANDLED;
+ imsc = readl(ldata->base + RTC_IMSC);
+
+ if (enabled == 1)
+ writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+ else
+ writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+ return 0;
}
-static int pl031_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+ struct rtc_time *tm, unsigned long *st_time,
+ unsigned long *bcd_year)
+{
+ int year = tm->tm_year + 1900;
+ int wday = tm->tm_wday;
+
+ /* wday masking is not working in hardware so wday must be valid */
+ if (wday < -1 || wday > 6) {
+ dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+ return -EINVAL;
+ } else if (wday == -1) {
+ /* wday is not provided, calculate it here */
+ unsigned long time;
+ struct rtc_time calc_tm;
+
+ rtc_tm_to_time(tm, &time);
+ rtc_time_to_tm(time, &calc_tm);
+ wday = calc_tm.tm_wday;
+ }
+
+ *bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+ *st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+ | (tm->tm_mday << RTC_MDAY_SHIFT)
+ | ((wday + 1) << RTC_WDAY_SHIFT)
+ | (tm->tm_hour << RTC_HOUR_SHIFT)
+ | (tm->tm_min << RTC_MIN_SHIFT)
+ | (tm->tm_sec << RTC_SEC_SHIFT);
+
+ return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+ struct rtc_time *tm)
+{
+ tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+ tm->tm_mon = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+ tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+ tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+ tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+ tm->tm_min = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+ tm->tm_sec = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+ tm->tm_year -= 1900;
+
+ return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- switch (cmd) {
- case RTC_AIE_OFF:
- writel(1, ldata->base + RTC_MIS);
- return 0;
- case RTC_AIE_ON:
- writel(0, ldata->base + RTC_MIS);
- return 0;
+ pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+ readl(ldata->base + RTC_YDR), tm);
+
+ return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long time;
+ unsigned long bcd_year;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YLR);
+ writel(time, ldata->base + RTC_LR);
}
- return -ENOIOCTLCMD;
+ return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+ readl(ldata->base + RTC_YMR), &alarm->time);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+ return ret;
+}
+
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned long bcd_year;
+ int ret;
+
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+ &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YMR);
+ writel(time, ldata->base + RTC_MR);
+
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
+
+ return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+ struct pl031_local *ldata = dev_id;
+ unsigned long rtcmis;
+ unsigned long events = 0;
+
+ rtcmis = readl(ldata->base + RTC_MIS);
+ if (rtcmis) {
+ writel(rtcmis, ldata->base + RTC_ICR);
+
+ if (rtcmis & RTC_BIT_AI)
+ events |= (RTC_AF | RTC_IRQF);
+
+ /* Timer interrupt is only available in ST variants */
+ if ((rtcmis & RTC_BIT_PI) &&
+ (ldata->hw_designer == AMBA_VENDOR_ST))
+ events |= (RTC_PF | RTC_IRQF);
+
+ rtc_update_irq(ldata->rtc, 1, events);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
}
static int pl031_read_time(struct device *dev, struct rtc_time *tm)
@@ -74,11 +252,14 @@
{
unsigned long time;
struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
- rtc_tm_to_time(tm, &time);
- writel(time, ldata->base + RTC_LR);
+ ret = rtc_tm_to_time(tm, &time);
- return 0;
+ if (ret == 0)
+ writel(time, ldata->base + RTC_LR);
+
+ return ret;
}
static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
@@ -86,8 +267,9 @@
struct pl031_local *ldata = dev_get_drvdata(dev);
rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
- alarm->pending = readl(ldata->base + RTC_RIS);
- alarm->enabled = readl(ldata->base + RTC_IMSC);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
return 0;
}
@@ -96,22 +278,71 @@
{
struct pl031_local *ldata = dev_get_drvdata(dev);
unsigned long time;
+ int ret;
- rtc_tm_to_time(&alarm->time, &time);
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = rtc_tm_to_time(&alarm->time, &time);
+ if (ret == 0) {
+ writel(time, ldata->base + RTC_MR);
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
- writel(time, ldata->base + RTC_MR);
- writel(!alarm->enabled, ldata->base + RTC_MIS);
+ return ret;
+}
+
+/* Periodic interrupt is only available in ST variants. */
+static int pl031_irq_set_state(struct device *dev, int enabled)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ if (enabled == 1) {
+ /* Clear any pending timer interrupt. */
+ writel(RTC_BIT_PI, ldata->base + RTC_ICR);
+
+ writel(readl(ldata->base + RTC_IMSC) | RTC_BIT_PI,
+ ldata->base + RTC_IMSC);
+
+ /* Now start the timer */
+ writel(readl(ldata->base + RTC_TCR) | RTC_TCR_EN,
+ ldata->base + RTC_TCR);
+
+ } else {
+ writel(readl(ldata->base + RTC_IMSC) & (~RTC_BIT_PI),
+ ldata->base + RTC_IMSC);
+
+ /* Also stop the timer */
+ writel(readl(ldata->base + RTC_TCR) & (~RTC_TCR_EN),
+ ldata->base + RTC_TCR);
+ }
+ /* Wait at least 1 RTC32 clock cycle to ensure next access
+ * to RTC_TCR will succeed.
+ */
+ udelay(40);
return 0;
}
-static const struct rtc_class_ops pl031_ops = {
- .ioctl = pl031_ioctl,
- .read_time = pl031_read_time,
- .set_time = pl031_set_time,
- .read_alarm = pl031_read_alarm,
- .set_alarm = pl031_set_alarm,
-};
+static int pl031_irq_set_freq(struct device *dev, int freq)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ /* Cant set timer if it is already enabled */
+ if (readl(ldata->base + RTC_TCR) & RTC_TCR_EN) {
+ dev_err(dev, "can't change frequency while timer enabled\n");
+ return -EINVAL;
+ }
+
+ /* If self start bit in RTC_TCR is set timer will start here,
+ * but we never set that bit. Instead we start the timer when
+ * set_state is called with enabled == 1.
+ */
+ writel(RTC_TIMER_FREQ / freq, ldata->base + RTC_TLR);
+
+ return 0;
+}
static int pl031_remove(struct amba_device *adev)
{
@@ -131,18 +362,20 @@
{
int ret;
struct pl031_local *ldata;
+ struct rtc_class_ops *ops = id->data;
ret = amba_request_regions(adev, NULL);
if (ret)
goto err_req;
- ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
+ ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
@@ -150,24 +383,36 @@
amba_set_drvdata(adev, ldata);
- if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
- "rtc-pl031", ldata->rtc)) {
- ret = -EIO;
- goto out_no_irq;
- }
+ ldata->hw_designer = amba_manf(adev);
+ ldata->hw_revision = amba_rev(adev);
- ldata->rtc = rtc_device_register("pl031", &adev->dev, &pl031_ops,
- THIS_MODULE);
+ dev_dbg(&adev->dev, "designer ID = 0x%02x\n", ldata->hw_designer);
+ dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
+
+ /* Enable the clockwatch on ST Variants */
+ if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
+ (ldata->hw_revision > 1))
+ writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
+ ldata->base + RTC_CR);
+
+ ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+ THIS_MODULE);
if (IS_ERR(ldata->rtc)) {
ret = PTR_ERR(ldata->rtc);
goto out_no_rtc;
}
+ if (request_irq(adev->irq[0], pl031_interrupt,
+ IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+
return 0;
-out_no_rtc:
- free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
+ rtc_device_unregister(ldata->rtc);
+out_no_rtc:
iounmap(ldata->base);
amba_set_drvdata(adev, NULL);
out_no_remap:
@@ -175,13 +420,57 @@
out:
amba_release_regions(adev);
err_req:
+
return ret;
}
+/* Operations for the original ARM version */
+static struct rtc_class_ops arm_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+};
+
+/* The First ST derivative */
+static struct rtc_class_ops stv1_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
+/* And the second ST derivative */
+static struct rtc_class_ops stv2_pl031_ops = {
+ .read_time = pl031_stv2_read_time,
+ .set_time = pl031_stv2_set_time,
+ .read_alarm = pl031_stv2_read_alarm,
+ .set_alarm = pl031_stv2_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
static struct amba_id pl031_ids[] __initdata = {
{
.id = 0x00041031,
.mask = 0x000fffff,
+ .data = &arm_pl031_ops,
+ },
+ /* ST Micro variants */
+ {
+ .id = 0x00180031,
+ .mask = 0x00ffffff,
+ .data = &stv1_pl031_ops,
+ },
+ {
+ .id = 0x00280031,
+ .mask = 0x00ffffff,
+ .data = &stv2_pl031_ops,
},
{0, 0},
};
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 5819dc0..1c500c4 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -23,6 +23,7 @@
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
+#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
@@ -2844,13 +2845,16 @@
rc = -EFAULT;
if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
goto out;
-#ifndef CONFIG_64BIT
- /* Make sure pointers are sane even on 31 bit. */
- if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
+ if (is_compat_task() || sizeof(long) == 4) {
+ /* Make sure pointers are sane even on 31 bit. */
rc = -EINVAL;
- goto out;
+ if ((usrparm.psf_data >> 32) != 0)
+ goto out;
+ if ((usrparm.rssd_result >> 32) != 0)
+ goto out;
+ usrparm.psf_data &= 0x7fffffffULL;
+ usrparm.rssd_result &= 0x7fffffffULL;
}
-#endif
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 478bcdb..fc7b30b 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -17,7 +17,7 @@
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <linux/smp_lock.h>
-
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
#include <asm/uaccess.h>
@@ -358,9 +358,8 @@
}
static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
- unsigned long arg)
+ struct cmbdata __user *argp)
{
- struct cmbdata __user *argp = (void __user *) arg;
size_t size = _IOC_SIZE(cmd);
struct cmbdata data;
int ret;
@@ -376,7 +375,12 @@
unsigned int cmd, unsigned long arg)
{
struct dasd_block *block = bdev->bd_disk->private_data;
- void __user *argp = (void __user *)arg;
+ void __user *argp;
+
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
if (!block)
return -ENODEV;
@@ -414,7 +418,7 @@
case BIODASDCMFDISABLE:
return disable_cmf(block->base->cdev);
case BIODASDREADALLCMB:
- return dasd_ioctl_readall_cmb(block, cmd, arg);
+ return dasd_ioctl_readall_cmb(block, cmd, argp);
default:
/* if the discipline has an ioctl method try it. */
if (block->base->discipline->ioctl) {
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9d61683..59ec073 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1037,22 +1037,6 @@
}
/*
- * Currently we don't have any io controls for 3215 ttys
- */
-static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- switch (cmd) {
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-/*
* Disable reading from a 3215 tty
*/
static void tty3215_throttle(struct tty_struct * tty)
@@ -1117,7 +1101,6 @@
.write_room = tty3215_write_room,
.chars_in_buffer = tty3215_chars_in_buffer,
.flush_buffer = tty3215_flush_buffer,
- .ioctl = tty3215_ioctl,
.throttle = tty3215_throttle,
.unthrottle = tty3215_unthrottle,
.stop = tty3215_stop,
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 247b2b9..31c59b0 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/smp_lock.h>
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/ebcdic.h>
@@ -322,6 +323,7 @@
static long
fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
+ char __user *argp;
struct fs3270 *fp;
struct raw3270_iocb iocb;
int rc;
@@ -329,6 +331,10 @@
fp = filp->private_data;
if (!fp)
return -ENODEV;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (char __user *)arg;
rc = 0;
mutex_lock(&fs3270_mutex);
switch (cmd) {
@@ -339,10 +345,10 @@
fp->write_command = arg;
break;
case TUBGETI:
- rc = put_user(fp->read_command, (char __user *) arg);
+ rc = put_user(fp->read_command, argp);
break;
case TUBGETO:
- rc = put_user(fp->write_command,(char __user *) arg);
+ rc = put_user(fp->write_command, argp);
break;
case TUBGETMOD:
iocb.model = fp->view.model;
@@ -351,8 +357,7 @@
iocb.pf_cnt = 24;
iocb.re_cnt = 20;
iocb.map = 0;
- if (copy_to_user((char __user *) arg, &iocb,
- sizeof(struct raw3270_iocb)))
+ if (copy_to_user(argp, &iocb, sizeof(struct raw3270_iocb)))
rc = -EFAULT;
break;
}
@@ -511,8 +516,8 @@
.write = fs3270_write, /* write */
.unlocked_ioctl = fs3270_ioctl, /* ioctl */
.compat_ioctl = fs3270_ioctl, /* ioctl */
- .open = fs3270_open, /* open */
- .release = fs3270_close, /* release */
+ .open = fs3270_open, /* open */
+ .release = fs3270_close, /* release */
};
/*
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 96816149..8d3d720 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -46,8 +46,6 @@
*/
static int tapeblock_open(struct block_device *, fmode_t);
static int tapeblock_release(struct gendisk *, fmode_t);
-static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int,
- unsigned long);
static int tapeblock_medium_changed(struct gendisk *);
static int tapeblock_revalidate_disk(struct gendisk *);
@@ -55,7 +53,6 @@
.owner = THIS_MODULE,
.open = tapeblock_open,
.release = tapeblock_release,
- .ioctl = tapeblock_ioctl,
.media_changed = tapeblock_medium_changed,
.revalidate_disk = tapeblock_revalidate_disk,
};
@@ -416,42 +413,6 @@
}
/*
- * Support of some generic block device IOCTLs.
- */
-static int
-tapeblock_ioctl(
- struct block_device * bdev,
- fmode_t mode,
- unsigned int command,
- unsigned long arg
-) {
- int rc;
- int minor;
- struct gendisk *disk = bdev->bd_disk;
- struct tape_device *device;
-
- rc = 0;
- BUG_ON(!disk);
- device = disk->private_data;
- BUG_ON(!device);
- minor = MINOR(bdev->bd_dev);
-
- DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
- DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
-
- switch (command) {
- /* Refuse some IOCTL calls without complaining (mount). */
- case 0x5310: /* CDROMMULTISESSION */
- rc = -EINVAL;
- break;
- default:
- rc = -EINVAL;
- }
-
- return rc;
-}
-
-/*
* Initialize block device frontend.
*/
int
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 2125ec7..539045a 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -18,6 +18,7 @@
#include <linux/proc_fs.h>
#include <linux/mtio.h>
#include <linux/smp_lock.h>
+#include <linux/compat.h>
#include <asm/uaccess.h>
@@ -37,8 +38,9 @@
static int tapechar_open(struct inode *,struct file *);
static int tapechar_release(struct inode *,struct file *);
static long tapechar_ioctl(struct file *, unsigned int, unsigned long);
-static long tapechar_compat_ioctl(struct file *, unsigned int,
- unsigned long);
+#ifdef CONFIG_COMPAT
+static long tapechar_compat_ioctl(struct file *, unsigned int, unsigned long);
+#endif
static const struct file_operations tape_fops =
{
@@ -46,7 +48,9 @@
.read = tapechar_read,
.write = tapechar_write,
.unlocked_ioctl = tapechar_ioctl,
+#ifdef CONFIG_COMPAT
.compat_ioctl = tapechar_compat_ioctl,
+#endif
.open = tapechar_open,
.release = tapechar_release,
};
@@ -457,15 +461,22 @@
return rc;
}
+#ifdef CONFIG_COMPAT
static long
tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data)
{
struct tape_device *device = filp->private_data;
int rval = -ENOIOCTLCMD;
+ unsigned long argp;
+ /* The 'arg' argument of any ioctl function may only be used for
+ * pointers because of the compat pointer conversion.
+ * Consider this when adding new ioctls.
+ */
+ argp = (unsigned long) compat_ptr(data);
if (device->discipline->ioctl_fn) {
mutex_lock(&device->mutex);
- rval = device->discipline->ioctl_fn(device, no, data);
+ rval = device->discipline->ioctl_fn(device, no, argp);
mutex_unlock(&device->mutex);
if (rval == -EINVAL)
rval = -ENOIOCTLCMD;
@@ -473,6 +484,7 @@
return rval;
}
+#endif /* CONFIG_COMPAT */
/*
* Initialize character device frontend.
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index a6087ce..921dcda 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
@@ -139,21 +140,26 @@
static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct vmcp_session *session;
+ int __user *argp;
int temp;
session = (struct vmcp_session *)file->private_data;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (int __user *)arg;
if (mutex_lock_interruptible(&session->mutex))
return -ERESTARTSYS;
switch (cmd) {
case VMCP_GETCODE:
temp = session->resp_code;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
case VMCP_SETBUF:
free_pages((unsigned long)session->response,
get_order(session->bufsize));
session->response=NULL;
- temp = get_user(session->bufsize, (int __user *)arg);
+ temp = get_user(session->bufsize, argp);
if (get_order(session->bufsize) > 8) {
session->bufsize = PAGE_SIZE;
temp = -EINVAL;
@@ -163,7 +169,7 @@
case VMCP_GETSIZE:
temp = session->resp_size;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
default:
mutex_unlock(&session->mutex);
return -ENOIOCTLCMD;
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index cc5144b..c84ac94 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -12,6 +12,7 @@
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
+#include <asm/compat.h>
#include <asm/cio.h>
#include <asm/chsc.h>
#include <asm/isc.h>
@@ -770,24 +771,30 @@
static long chsc_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
+ void __user *argp;
+
CHSC_MSG(2, "chsc_ioctl called, cmd=%x\n", cmd);
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
switch (cmd) {
case CHSC_START:
- return chsc_ioctl_start((void __user *)arg);
+ return chsc_ioctl_start(argp);
case CHSC_INFO_CHANNEL_PATH:
- return chsc_ioctl_info_channel_path((void __user *)arg);
+ return chsc_ioctl_info_channel_path(argp);
case CHSC_INFO_CU:
- return chsc_ioctl_info_cu((void __user *)arg);
+ return chsc_ioctl_info_cu(argp);
case CHSC_INFO_SCH_CU:
- return chsc_ioctl_info_sch_cu((void __user *)arg);
+ return chsc_ioctl_info_sch_cu(argp);
case CHSC_INFO_CI:
- return chsc_ioctl_conf_info((void __user *)arg);
+ return chsc_ioctl_conf_info(argp);
case CHSC_INFO_CCL:
- return chsc_ioctl_conf_comp_list((void __user *)arg);
+ return chsc_ioctl_conf_comp_list(argp);
case CHSC_INFO_CPD:
- return chsc_ioctl_chpd((void __user *)arg);
+ return chsc_ioctl_chpd(argp);
case CHSC_INFO_DCAL:
- return chsc_ioctl_dcal((void __user *)arg);
+ return chsc_ioctl_dcal(argp);
default: /* unknown ioctl number */
return -ENOIOCTLCMD;
}
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 0d4d18b..c68be24 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -393,10 +393,12 @@
* u_mult_inv > 128 bytes.
*/
if (copied == 0) {
- int len;
+ unsigned int len;
spin_unlock_bh(&zcrypt_device_lock);
/* len is max 256 / 2 - 120 = 8 */
len = crt->inputdatalength / 2 - 120;
+ if (len > sizeof(z1))
+ return -EFAULT;
z1 = z2 = z3 = 0;
if (copy_from_user(&z1, crt->np_prime, len) ||
copy_from_user(&z2, crt->bp_key, len) ||
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 3c77bfe..147bb1a 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -3398,7 +3398,7 @@
goto out_err;
}
CLAW_DBF_TEXT(2, setup, "init_mod");
- claw_root_dev = root_device_register("qeth");
+ claw_root_dev = root_device_register("claw");
ret = IS_ERR(claw_root_dev) ? PTR_ERR(claw_root_dev) : 0;
if (ret)
goto register_err;
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 26ffdcd..15a00e8 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1440,6 +1440,10 @@
static int is_cxgb3_dev(struct net_device *dev)
{
struct cxgb3i_sdev_data *cdata;
+ struct net_device *ndev = dev;
+
+ if (dev->priv_flags & IFF_802_1Q_VLAN)
+ ndev = vlan_dev_real_dev(dev);
write_lock(&cdata_rwlock);
list_for_each_entry(cdata, &cdata_list, list) {
@@ -1447,7 +1451,7 @@
int i;
for (i = 0; i < ports->nports; i++)
- if (dev == ports->lldevs[i]) {
+ if (ndev == ports->lldevs[i]) {
write_unlock(&cdata_rwlock);
return 1;
}
@@ -1566,6 +1570,26 @@
return -EINVAL;
}
+/**
+ * cxgb3i_find_dev - find the interface associated with the given address
+ * @ipaddr: ip address
+ */
+static struct net_device *
+cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr)
+{
+ struct flowi fl;
+ int err;
+ struct rtable *rt;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.nl_u.ip4_u.daddr = ipaddr;
+
+ err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl);
+ if (!err)
+ return (&rt->u.dst)->dev;
+
+ return NULL;
+}
/**
* cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address
@@ -1581,6 +1605,7 @@
struct cxgb3i_sdev_data *cdata;
struct t3cdev *cdev;
__be32 sipv4;
+ struct net_device *dstdev;
int err;
c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
@@ -1591,6 +1616,13 @@
c3cn->daddr.sin_port = usin->sin_port;
c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
+ dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr);
+ if (!dstdev || !is_cxgb3_dev(dstdev))
+ return -ENETUNREACH;
+
+ if (dstdev->priv_flags & IFF_802_1Q_VLAN)
+ dev = dstdev;
+
rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
c3cn->daddr.sin_addr.s_addr,
c3cn->saddr.sin_port,
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ce52270..2cc3968 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4142,8 +4142,8 @@
spin_lock_irq(shost->host_lock);
if (vport->fc_rscn_flush) {
/* Another thread is walking fc_rscn_id_list on this vport */
- spin_unlock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_DISCOVERY;
+ spin_unlock_irq(shost->host_lock);
/* Send back ACC */
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
return 0;
@@ -5948,8 +5948,8 @@
lpfc_initial_fdisc(vport);
break;
}
-
} else {
+ vport->vpi_state |= LPFC_VPI_REGISTERED;
if (vport == phba->pport)
if (phba->sli_rev < LPFC_SLI_REV4)
lpfc_issue_fabric_reglogin(vport);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 3b94244..2445e39 100755
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -747,6 +747,10 @@
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
+
+ /* Block all SCSI stack I/Os */
+ lpfc_scsi_dev_block(phba);
+
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
if (phba->link_state > LPFC_LINK_DOWN) {
@@ -1555,10 +1559,16 @@
* to book keeping the FCFIs can be used.
*/
if (shdr_status || shdr_add_status) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2521 READ_FCF_RECORD mailbox failed "
- "with status x%x add_status x%x, mbx\n",
- shdr_status, shdr_add_status);
+ if (shdr_status == STATUS_FCF_TABLE_EMPTY) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2726 READ_FCF_RECORD Indicates empty "
+ "FCF table.\n");
+ } else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2521 READ_FCF_RECORD mailbox failed "
+ "with status x%x add_status x%x, mbx\n",
+ shdr_status, shdr_add_status);
+ }
goto out;
}
/* Interpreting the returned information of FCF records */
@@ -1698,7 +1708,9 @@
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
return;
}
+ spin_lock_irq(&phba->hbalock);
vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
+ spin_unlock_irq(&phba->hbalock);
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
lpfc_initial_fdisc(vport);
@@ -2259,7 +2271,10 @@
mb->mbxStatus);
break;
}
+ spin_lock_irq(&phba->hbalock);
vport->vpi_state &= ~LPFC_VPI_REGISTERED;
+ vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
@@ -4475,8 +4490,10 @@
(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
lpfc_mbx_unreg_vpi(vports[i]);
+ spin_lock_irq(&phba->hbalock);
vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+ spin_unlock_irq(&phba->hbalock);
}
lpfc_destroy_vport_work_array(phba, vports);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
old mode 100644
new mode 100755
index 1585148..8a2a1c5
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1013,7 +1013,7 @@
};
#define LPFC_HDR_BUF_SIZE 128
-#define LPFC_DATA_BUF_SIZE 4096
+#define LPFC_DATA_BUF_SIZE 2048
struct rq_context {
uint32_t word0;
#define lpfc_rq_context_rq_size_SHIFT 16
@@ -1371,6 +1371,7 @@
#define STATUS_ERROR_ACITMAIN 0x2a
#define STATUS_REBOOT_REQUIRED 0x2c
#define STATUS_FCF_IN_USE 0x3a
+#define STATUS_FCF_TABLE_EMPTY 0x43
struct lpfc_mbx_sli4_config {
struct mbox_header header;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d4da6bd..b8eb1b6 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3006,6 +3006,7 @@
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
+ uint32_t link_state;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
@@ -3052,9 +3053,12 @@
break;
/*
* Currently, driver support only one FCF - so treat this as
- * a link down.
+ * a link down, but save the link state because we don't want
+ * it to be changed to Link Down unless it is already down.
*/
+ link_state = phba->link_state;
lpfc_linkdown(phba);
+ phba->link_state = link_state;
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
@@ -7226,8 +7230,6 @@
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
@@ -7256,6 +7258,9 @@
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
@@ -7507,6 +7512,9 @@
error = -ENODEV;
goto out_free_sysfs_attr;
}
+ /* Default to single FCP EQ for non-MSI-X */
+ if (phba->intr_type != MSIX)
+ phba->cfg_fcp_eq_count = 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 7935667..589549b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1383,7 +1383,7 @@
/* HBQ for ELS and CT traffic. */
static struct lpfc_hbq_init lpfc_els_hbq = {
.rn = 1,
- .entry_count = 200,
+ .entry_count = 256,
.mask_count = 0,
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
@@ -1482,8 +1482,11 @@
int
lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->add_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return 0;
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->add_count);
}
/**
@@ -1498,8 +1501,12 @@
static int
lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->init_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->entry_count);
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->init_count);
}
/**
@@ -4110,6 +4117,7 @@
if (rc) {
dma_free_coherent(&phba->pcidev->dev, dma_size,
dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
return -EIO;
}
@@ -5848,7 +5856,6 @@
iocbq->iocb.un.ulpWord[3]);
wqe->generic.word3 = 0;
bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
- bf_set(wqe_xc, &wqe->generic, 1);
/* The entire sequence is transmitted for this IOCB */
xmit_len = total_len;
cmnd = CMD_XMIT_SEQUENCE64_CR;
@@ -10944,7 +10951,8 @@
return dmabuf;
}
temp_hdr = seq_dmabuf->hbuf.virt;
- if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) <
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_del_init(&seq_dmabuf->hbuf.list);
list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
@@ -10955,6 +10963,11 @@
list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
seq_dmabuf->time_stamp = jiffies;
lpfc_update_rcv_time_stamp(vport);
+ if (list_empty(&seq_dmabuf->dbuf.list)) {
+ temp_hdr = dmabuf->hbuf.virt;
+ list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+ return seq_dmabuf;
+ }
/* find the correct place in the sequence to insert this frame */
list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
@@ -10963,7 +10976,8 @@
* If the frame's sequence count is greater than the frame on
* the list then insert the frame right after this frame
*/
- if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) >
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
return seq_dmabuf;
}
@@ -11210,7 +11224,7 @@
seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* If there is a hole in the sequence count then fail. */
- if (++seq_count != hdr->fh_seq_cnt)
+ if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt))
return 0;
fctl = (hdr->fh_f_ctl[0] << 16 |
hdr->fh_f_ctl[1] << 8 |
@@ -11242,6 +11256,7 @@
struct lpfc_iocbq *first_iocbq, *iocbq;
struct fc_frame_header *fc_hdr;
uint32_t sid;
+ struct ulp_bde64 *pbde;
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* remove from receive buffer list */
@@ -11283,8 +11298,9 @@
if (!iocbq->context3) {
iocbq->context3 = d_buf;
iocbq->iocb.ulpBdeCount++;
- iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
- LPFC_DATA_BUF_SIZE;
+ pbde = (struct ulp_bde64 *)
+ &iocbq->iocb.unsli3.sli3Words[4];
+ pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length,
&seq_dmabuf->cq_event.cqe.rcqe_cmpl);
@@ -11401,15 +11417,9 @@
return;
}
/* If not last frame in sequence continue processing frames. */
- if (!lpfc_seq_complete(seq_dmabuf)) {
- /*
- * When saving off frames post a new one and mark this
- * frame to be freed when it is finished.
- **/
- lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
- dmabuf->tag = -1;
+ if (!lpfc_seq_complete(seq_dmabuf))
return;
- }
+
/* Send the complete sequence to the upper layer protocol */
lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
}
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 25d66d0..44e5f57 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -28,7 +28,7 @@
/* Multi-queue arrangement for fast-path FCP work queues */
#define LPFC_FN_EQN_MAX 8
#define LPFC_SP_EQN_DEF 1
-#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 4
#define LPFC_FP_EQN_MIN 1
#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c7f3aed..792f722 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.6"
+#define LPFC_DRIVER_VERSION "8.3.7"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 7d6dd83..e3c7fa6 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -512,8 +512,10 @@
return VPORT_OK;
}
+ spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
@@ -700,7 +702,7 @@
}
spin_unlock_irq(&phba->ndlp_lock);
}
- if (vport->vpi_state != LPFC_VPI_REGISTERED)
+ if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
goto skip_logo;
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 99ff99e..708ea31 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -4046,7 +4046,7 @@
}
-static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO,
+static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR,
megasas_sysfs_show_poll_mode_io,
megasas_sysfs_set_poll_mode_io);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index e7d2688..b6f1ef9 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -2483,14 +2483,12 @@
sense_copied = 1;
}
- if (RES_IS_GSCSI(res->cfg_entry)) {
+ if (RES_IS_GSCSI(res->cfg_entry))
pmcraid_cancel_all(cmd, sense_copied);
- } else if (sense_copied) {
+ else if (sense_copied)
pmcraid_erp_done(cmd);
- return 0;
- } else {
+ else
pmcraid_request_sense(cmd);
- }
return 1;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 21e2bc4..3a9f5b2 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -232,6 +232,9 @@
if (off)
return 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
return -EINVAL;
if (start > ha->optrom_size)
@@ -379,6 +382,9 @@
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN))
return 0;
@@ -398,6 +404,9 @@
struct qla_hw_data *ha = vha->hw;
uint8_t *tmp_data;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size ||
!ha->isp_ops->write_nvram)
return 0;
@@ -1238,10 +1247,11 @@
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
- int rval;
+ int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- rval = qla2x00_get_firmware_state(vha, state);
+ if (!vha->hw->flags.eeh_busy)
+ rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));
@@ -1452,10 +1462,13 @@
if (!fcport)
return;
- if (unlikely(pci_channel_offline(fcport->vha->hw->pdev)))
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
+ if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
- else
- qla2x00_abort_fcport_cmds(fcport);
+ return;
+ }
/*
* Transport has effectively 'deleted' the rport, clear
@@ -1475,6 +1488,9 @@
if (!fcport)
return;
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
return;
@@ -1515,6 +1531,12 @@
pfc_host_stat = &ha->fc_host_stat;
memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
+ if (test_bit(UNLOADING, &vha->dpc_flags))
+ goto done;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto done;
+
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index f660dd7..d6d9c86 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -26,7 +26,7 @@
/* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */
/* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */
/* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */
-/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */
+/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
/*
* Macros use for debugging the driver.
@@ -132,6 +132,13 @@
#else
#define DEBUG16(x) do {} while (0)
#endif
+
+#if defined(QL_DEBUG_LEVEL_17)
+#define DEBUG17(x) do {x;} while (0)
+#else
+#define DEBUG17(x) do {} while (0)
+#endif
+
/*
* Firmware Dump structure definition
*/
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 384afda..608e675 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2256,11 +2256,13 @@
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
uint32_t npiv_supported :1;
+ uint32_t pci_channel_io_perm_failure :1;
uint32_t fce_enabled :1;
uint32_t fac_supported :1;
uint32_t chip_reset_done :1;
uint32_t port0 :1;
uint32_t running_gold_fw :1;
+ uint32_t eeh_busy :1;
uint32_t cpu_affinity_enabled :1;
uint32_t disable_msix_handshake :1;
} flags;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 0b6801f..f61fb8d 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -324,6 +324,7 @@
extern int
qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int qla2x00_get_data_rate(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 73a7935..b4a0eac 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -269,6 +269,8 @@
vha->flags.online = 0;
ha->flags.chip_reset_done = 0;
vha->flags.reset_active = 0;
+ ha->flags.pci_channel_io_perm_failure = 0;
+ ha->flags.eeh_busy = 0;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
@@ -581,6 +583,9 @@
uint32_t cnt;
uint16_t cmd;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return;
+
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -786,6 +791,12 @@
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
+
+ if (pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure) {
+ return;
+ }
+
ha->isp_ops->disable_intrs(ha);
/* Perform RISC reset. */
@@ -2266,6 +2277,8 @@
clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
clear_bit(RSCN_UPDATE, &vha->dpc_flags);
+ qla2x00_get_data_rate(vha);
+
/* Determine what we need to do */
if (ha->current_topology == ISP_CFG_FL &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
@@ -3560,6 +3573,13 @@
/* Requeue all commands in outstanding command list. */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
+ if (unlikely(pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure)) {
+ clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+ status = 0;
+ return status;
+ }
+
ha->isp_ops->get_flash_version(vha, req->ring);
ha->isp_ops->nvram_config(vha);
@@ -4458,6 +4478,8 @@
int ret, retries;
struct qla_hw_data *ha = vha->hw;
+ if (ha->flags.pci_channel_io_perm_failure)
+ return;
if (!IS_FWI2_CAPABLE(ha))
return;
if (!ha->fw_major_version)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1692a88..ffd0efd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -152,7 +152,7 @@
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_WORD(®->hccr);
@@ -1846,12 +1846,15 @@
reg = &ha->iobase->isp24;
status = 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return IRQ_HANDLED;
+
spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
@@ -1992,7 +1995,7 @@
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 05d595d..056e4d4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -56,6 +56,12 @@
DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no));
+ if (ha->flags.pci_channel_io_perm_failure) {
+ DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
+ "Exiting.\n", __func__, vha->host_no));
+ return QLA_FUNCTION_TIMEOUT;
+ }
+
/*
* Wait for active mailbox commands to finish by waiting at most tov
* seconds. This is to serialize actual issuing of mailbox cmds during
@@ -154,10 +160,14 @@
/* Check for pending interrupts. */
qla2x00_poll(ha->rsp_q_map[0]);
- if (command != MBC_LOAD_RISC_RAM_EXTENDED &&
- !ha->flags.mbox_int)
+ if (!ha->flags.mbox_int &&
+ !(IS_QLA2200(ha) &&
+ command == MBC_LOAD_RISC_RAM_EXTENDED))
msleep(10);
} /* while */
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "Waited %d sec\n",
+ (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)));
}
/* Check whether we timed out */
@@ -227,7 +237,8 @@
if (rval == QLA_FUNCTION_TIMEOUT &&
mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
- if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
+ if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
+ ha->flags.eeh_busy) {
/* not in dpc. schedule it for dpc to take over. */
DEBUG(printk("%s(%ld): timeout schedule "
"isp_abort_needed.\n", __func__,
@@ -237,7 +248,7 @@
base_vha->host_no));
qla_printk(KERN_WARNING, ha,
"Mailbox command timeout occurred. Scheduling ISP "
- "abort.\n");
+ "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy);
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else if (!abort_active) {
@@ -2530,6 +2541,9 @@
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2565,6 +2579,9 @@
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2595,6 +2612,9 @@
if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2639,6 +2659,9 @@
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -3643,3 +3666,36 @@
return rval;
}
+
+int
+qla2x00_get_data_rate(scsi_qla_host_t *vha)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_DATA_RATE;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n",
+ __func__, vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+ if (mcp->mb[1] != 0x7)
+ ha->link_data_rate = mcp->mb[1];
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2a4c7f4..b901aa2 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -639,8 +639,10 @@
struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
struct scsi_qla_host *vha;
+ spin_lock_irq(&rsp->hw->hardware_lock);
vha = qla25xx_get_host(rsp);
qla24xx_process_response_queue(vha, rsp);
+ spin_unlock_irq(&rsp->hw->hardware_lock);
}
/* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2f873d2..209f50e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -475,11 +475,11 @@
srb_t *sp;
int rval;
- if (unlikely(pci_channel_offline(ha->pdev))) {
- if (ha->pdev->error_state == pci_channel_io_frozen)
- cmd->result = DID_REQUEUE << 16;
- else
+ if (ha->flags.eeh_busy) {
+ if (ha->flags.pci_channel_io_perm_failure)
cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_REQUEUE << 16;
goto qc24_fail_command;
}
@@ -552,8 +552,15 @@
#define ABORT_POLLING_PERIOD 1000
#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
+ scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ struct qla_hw_data *ha = vha->hw;
int ret = QLA_SUCCESS;
+ if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+ return ret;
+ }
+
while (CMD_SP(cmd) && wait_iter--) {
msleep(ABORT_POLLING_PERIOD);
}
@@ -1810,6 +1817,13 @@
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
+
+ /* Set EEH reset type to fundamental if required by hba */
+ if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+ pdev->needs_freset = 1;
+ pci_save_state(pdev);
+ }
+
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
@@ -2174,6 +2188,24 @@
{
struct qla_hw_data *ha = vha->hw;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
+ /* Kill the kernel thread for this host */
+ if (ha->dpc_thread) {
+ struct task_struct *t = ha->dpc_thread;
+
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ kthread_stop(t);
+ }
+
qla25xx_delete_queues(vha);
if (ha->flags.fce_enabled)
@@ -2185,6 +2217,8 @@
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
+ vha->flags.online = 0;
+
/* turn-off interrupts on the card */
if (ha->interrupts_on)
ha->isp_ops->disable_intrs(ha);
@@ -2859,6 +2893,13 @@
if (!base_vha->flags.init_done)
continue;
+ if (ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "qla2x00_do_dpc: dpc_flags: %lx\n",
+ base_vha->dpc_flags));
+ continue;
+ }
+
DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
ha->dpc_active = 1;
@@ -3049,8 +3090,13 @@
int index;
srb_t *sp;
int t;
+ uint16_t w;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
+
+ /* Hardware read to raise pending EEH errors during mailbox waits. */
+ if (!pci_channel_offline(ha->pdev))
+ pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
/*
* Ports - Port down timer.
*
@@ -3252,16 +3298,23 @@
static pci_ers_result_t
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
- scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+ scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+ state));
switch (state) {
case pci_channel_io_normal:
+ ha->flags.eeh_busy = 0;
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
+ ha->flags.eeh_busy = 1;
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
- qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+ ha->flags.pci_channel_io_perm_failure = 1;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
@@ -3312,6 +3365,8 @@
struct qla_hw_data *ha = base_vha->hw;
int rc;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
@@ -3320,19 +3375,33 @@
if (rc) {
qla_printk(KERN_WARNING, ha,
"Can't re-enable PCI device after reset.\n");
-
return ret;
}
- pci_set_master(pdev);
if (ha->isp_ops->pci_config(base_vha))
return ret;
+#ifdef QL_DEBUG_LEVEL_17
+ {
+ uint8_t b;
+ uint32_t i;
+
+ printk("slot_reset_1: ");
+ for (i = 0; i < 256; i++) {
+ pci_read_config_byte(ha->pdev, i, &b);
+ printk("%s%02x", (i%16) ? " " : "\n", b);
+ }
+ printk("\n");
+ }
+#endif
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "slot_reset-return:ret=%x\n", ret));
+
return ret;
}
@@ -3343,12 +3412,17 @@
struct qla_hw_data *ha = base_vha->hw;
int ret;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"the device failed to resume I/O "
"from slot/link_reset");
}
+
+ ha->flags.eeh_busy = 0;
+
pci_cleanup_aer_uncorrect_error_status(pdev);
}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index c482220..a65dd95 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k8"
+#define QLA2XXX_VERSION "8.03.01-k9"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 3058bb1..fd7b15b 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -623,6 +623,11 @@
}
break;
case INQUIRY:
+ if (lun >= host->max_lun) {
+ cmd->result = DID_NO_CONNECT << 16;
+ done(cmd);
+ return 0;
+ }
if (id != host->max_id - 1)
break;
if (!lun && !cmd->device->channel &&
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 1e3d193..8681f13 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -58,7 +58,7 @@
static void serial21285_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
- disable_irq(IRQ_CONTX);
+ disable_irq_nosync(IRQ_CONTX);
tx_enabled(port) = 0;
}
}
@@ -74,7 +74,7 @@
static void serial21285_stop_rx(struct uart_port *port)
{
if (rx_enabled(port)) {
- disable_irq(IRQ_CONRX);
+ disable_irq_nosync(IRQ_CONRX);
rx_enabled(port) = 0;
}
}
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02..b5496a1 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -354,6 +354,8 @@
{ "FUJ02E5", 0 },
/* Fujitsu P-series tablet PC device */
{ "FUJ02E6", 0 },
+ /* Fujitsu Wacom 2FGT Tablet PC device */
+ { "FUJ02E7", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd1..683e66f 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@
goto ack_tx_int;
}
+ /* Under some circumstances, we see interrupts reported for
+ * a closed channel. The interrupt mask in R1 is clear, but
+ * R3 still signals the interrupts and we see them when taking
+ * an interrupt for the other channel (this could be a qemu
+ * bug but since the ESCC doc doesn't specify precsiely whether
+ * R3 interrup status bits are masked by R1 interrupt enable
+ * bits, better safe than sorry). --BenH.
+ */
+ if (!ZS_IS_OPEN(uap))
+ goto ack_tx_int;
+
if (uap->port.x_char) {
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index fc413f0..0ee7239 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -819,6 +819,7 @@
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
@@ -827,7 +828,7 @@
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
@@ -861,6 +862,18 @@
};
MODULE_DEVICE_TABLE(pcmcia, serial_ids);
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/3CCFEM556.cis");
+MODULE_FIRMWARE("cis/3CXEM556.cis");
+MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_555_SER.cis");
+MODULE_FIRMWARE("cis/MT5634ZLX.cis");
+MODULE_FIRMWARE("cis/COMpad2.cis");
+MODULE_FIRMWARE("cis/COMpad4.cis");
+MODULE_FIRMWARE("cis/RS-COM-2P.cis");
+
static struct pcmcia_driver serial_cs_driver = {
.owner = THIS_MODULE,
.drv = {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 37f0de9..42f3333 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1052,7 +1052,18 @@
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
- sci_port->port.fifosize = 1;
+
+ switch (p->type) {
+ case PORT_SCIFA:
+ sci_port->port.fifosize = 64;
+ break;
+ case PORT_SCIF:
+ sci_port->port.fifosize = 16;
+ break;
+ default:
+ sci_port->port.fifosize = 1;
+ break;
+ }
if (dev) {
sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index ff5bbb9..9aeb681 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -363,6 +363,7 @@
void *rx_end;
enum ssp_reading read;
enum ssp_writing write;
+ u32 exp_fifo_level;
};
/**
@@ -501,6 +502,9 @@
while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
readw(SSP_DR(pl022->virtbase));
} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+
+ pl022->exp_fifo_level = 0;
+
return limit;
}
@@ -583,10 +587,9 @@
* errons in 8bit wide transfers on ARM variants (just 8 words
* FIFO, means only 8x8 = 64 bits in FIFO) at least.
*
- * FIXME: currently we have no logic to account for this.
- * perhaps there is even something broken in HW regarding
- * 8bit transfers (it doesn't fail on 16bit) so this needs
- * more investigation...
+ * To prevent this issue, the TX FIFO is only filled to the
+ * unused RX FIFO fill length, regardless of what the TX
+ * FIFO status flag indicates.
*/
dev_dbg(&pl022->adev->dev,
"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
@@ -613,11 +616,12 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
/*
- * Write as much as you can, while keeping an eye on the RX FIFO!
+ * Write as much as possible up to the RX FIFO size
*/
- while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ while ((pl022->exp_fifo_level < pl022->vendor->fifodepth)
&& (pl022->tx < pl022->tx_end)) {
switch (pl022->write) {
case WRITING_NULL:
@@ -634,6 +638,7 @@
break;
}
pl022->tx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level++;
/*
* This inner reader takes care of things appearing in the RX
* FIFO as we're transmitting. This will happen a lot since the
@@ -660,6 +665,7 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
}
/*
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c
index e4df813..1eb079b 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.c
+++ b/drivers/staging/cx25821/cx25821-medusa-video.c
@@ -860,10 +860,8 @@
ret_val = medusa_set_videostandard(dev);
- if (ret_val < 0) {
- mutex_unlock(&dev->lock);
+ if (ret_val < 0)
return -EINVAL;
- }
return 1;
}
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 409ca96..a3a7f89 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -139,8 +139,6 @@
if (!pdata)
return -ENXIO;
- omapbl_ops.check_fb = pdata->check_fb;
-
bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL);
if (unlikely(!bl))
return -ENOMEM;
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index c7c6455..e192b05 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -189,11 +189,6 @@
struct omapfb_color_key color_key;
} dispc;
-static struct platform_device omapdss_device = {
- .name = "omapdss",
- .id = -1,
-};
-
static void enable_lcd_clocks(int enable);
static void inline dispc_write_reg(int idx, u32 val)
@@ -920,20 +915,20 @@
static int get_dss_clocks(void)
{
- dispc.dss_ick = clk_get(&omapdss_device.dev, "ick");
+ dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
if (IS_ERR(dispc.dss_ick)) {
dev_err(dispc.fbdev->dev, "can't get ick\n");
return PTR_ERR(dispc.dss_ick);
}
- dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck");
+ dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
if (IS_ERR(dispc.dss1_fck)) {
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
clk_put(dispc.dss_ick);
return PTR_ERR(dispc.dss1_fck);
}
- dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck");
+ dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_fck");
if (IS_ERR(dispc.dss_54m_fck)) {
dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
clk_put(dispc.dss_ick);
@@ -1385,12 +1380,6 @@
int skip_init = 0;
int i;
- r = platform_device_register(&omapdss_device);
- if (r) {
- dev_err(fbdev->dev, "can't register omapdss device\n");
- return r;
- }
-
memset(&dispc, 0, sizeof(dispc));
dispc.base = ioremap(DISPC_BASE, SZ_1K);
@@ -1534,7 +1523,6 @@
free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
put_dss_clocks();
iounmap(dispc.base);
- platform_device_unregister(&omapdss_device);
}
const struct lcd_ctrl omap2_int_ctrl = {
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c
index a9007c5..4802419 100644
--- a/drivers/video/omap/lcd_htcherald.c
+++ b/drivers/video/omap/lcd_htcherald.c
@@ -115,12 +115,12 @@
},
};
-static int htcherald_panel_drv_init(void)
+static int __init htcherald_panel_drv_init(void)
{
return platform_driver_register(&htcherald_panel_driver);
}
-static void htcherald_panel_drv_cleanup(void)
+static void __exit htcherald_panel_drv_cleanup(void)
{
platform_driver_unregister(&htcherald_panel_driver);
}
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index 46e4714..af3c9e5 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -203,6 +203,8 @@
struct omapfb_mem_desc mem_desc;
struct fb_info *fb_info[OMAPFB_PLANE_NUM];
+
+ struct platform_device *dssdev; /* dummy dev for clocks */
};
#ifdef CONFIG_ARCH_OMAP1
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index c7f59a5..2c4f470 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -83,6 +83,19 @@
{ 1 << OMAPFB_COLOR_YUY422, "YUY422", },
};
+static void omapdss_release(struct device *dev)
+{
+}
+
+/* dummy device for clocks */
+static struct platform_device omapdss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .release = omapdss_release,
+ },
+};
+
/*
* ---------------------------------------------------------------------------
* LCD panel
@@ -1700,6 +1713,7 @@
fbdev->dev = &pdev->dev;
fbdev->panel = panel;
+ fbdev->dssdev = &omapdss_device;
platform_set_drvdata(pdev, fbdev);
mutex_init(&fbdev->rqueue_mutex);
@@ -1814,8 +1828,16 @@
static int omapfb_probe(struct platform_device *pdev)
{
+ int r;
+
BUG_ON(fbdev_pdev != NULL);
+ r = platform_device_register(&omapdss_device);
+ if (r) {
+ dev_err(&pdev->dev, "can't register omapdss device\n");
+ return r;
+ }
+
/* Delay actual initialization until the LCD is registered */
fbdev_pdev = pdev;
if (fbdev_panel != NULL)
@@ -1843,6 +1865,9 @@
fbdev->state = OMAPFB_DISABLED;
omapfb_free_resources(fbdev, saved_state);
+ platform_device_unregister(&omapdss_device);
+ fbdev->dssdev = NULL;
+
return 0;
}
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index fed7b1b..1162603 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -83,13 +83,13 @@
static int rfbi_get_clocks(void)
{
- rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+ rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
if (IS_ERR(rfbi.dss_ick)) {
dev_err(rfbi.fbdev->dev, "can't get ick\n");
return PTR_ERR(rfbi.dss_ick);
}
- rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+ rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
if (IS_ERR(rfbi.dss1_fck)) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 71d8dec..c63ce76 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -25,6 +25,13 @@
This enables debug messages. You need to enable printing
with 'debug' module parameter.
+config OMAP2_DSS_COLLECT_IRQ_STATS
+ bool "Collect DSS IRQ statistics"
+ depends on OMAP2_DSS_DEBUG_SUPPORT
+ default n
+ help
+ Collect DSS IRQ statistics, printable via debugfs
+
config OMAP2_DSS_RFBI
bool "RFBI support"
default n
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 29497a0..82918ee 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -124,6 +124,7 @@
dss_clk_disable_all_no_ctx();
}
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
/* CLOCKS */
static void core_dump_clocks(struct seq_file *s)
{
@@ -149,6 +150,7 @@
clocks[i]->usecount);
}
}
+#endif /* defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) */
static int dss_get_clock(struct clk **clock, const char *clk_name)
{
@@ -395,6 +397,14 @@
debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
&dss_debug_dump_clocks, &dss_debug_fops);
+ debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir,
+ &dispc_dump_irqs, &dss_debug_fops);
+
+#ifdef CONFIG_OMAP2_DSS_DSI
+ debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir,
+ &dsi_dump_irqs, &dss_debug_fops);
+#endif
+
debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
&dss_dump_regs, &dss_debug_fops);
debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 6dabf4b..de8bfba 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -148,6 +148,12 @@
DISPC_VID_ATTRIBUTES(0),
DISPC_VID_ATTRIBUTES(1) };
+struct dispc_irq_stats {
+ unsigned long last_reset;
+ unsigned irq_count;
+ unsigned irqs[32];
+};
+
static struct {
void __iomem *base;
@@ -160,6 +166,11 @@
struct work_struct error_work;
u32 ctx[DISPC_SZ_REGS / sizeof(u32)];
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spinlock_t irq_stats_lock;
+ struct dispc_irq_stats irq_stats;
+#endif
} dispc;
static void _omap_dispc_set_irqs(void);
@@ -1443,7 +1454,10 @@
do_div(tmp, 2 * out_height * ppl);
fclk = tmp;
- if (height > 2 * out_height && ppl != out_width) {
+ if (height > 2 * out_height) {
+ if (ppl == out_width)
+ return 0;
+
tmp = pclk * (height - 2 * out_height) * out_width;
do_div(tmp, 2 * out_height * (ppl - out_width));
fclk = max(fclk, (u32) tmp);
@@ -1623,7 +1637,7 @@
DSSDBG("required fclk rate = %lu Hz\n", fclk);
DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
- if (fclk > dispc_fclk_rate()) {
+ if (!fclk || fclk > dispc_fclk_rate()) {
DSSERR("failed to set up scaling, "
"required fclk rate = %lu Hz, "
"current fclk rate = %lu Hz\n",
@@ -2247,6 +2261,50 @@
enable_clocks(0);
}
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+void dispc_dump_irqs(struct seq_file *s)
+{
+ unsigned long flags;
+ struct dispc_irq_stats stats;
+
+ spin_lock_irqsave(&dispc.irq_stats_lock, flags);
+
+ stats = dispc.irq_stats;
+ memset(&dispc.irq_stats, 0, sizeof(dispc.irq_stats));
+ dispc.irq_stats.last_reset = jiffies;
+
+ spin_unlock_irqrestore(&dispc.irq_stats_lock, flags);
+
+ seq_printf(s, "period %u ms\n",
+ jiffies_to_msecs(jiffies - stats.last_reset));
+
+ seq_printf(s, "irqs %d\n", stats.irq_count);
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, stats.irqs[ffs(DISPC_IRQ_##x)-1]);
+
+ PIS(FRAMEDONE);
+ PIS(VSYNC);
+ PIS(EVSYNC_EVEN);
+ PIS(EVSYNC_ODD);
+ PIS(ACBIAS_COUNT_STAT);
+ PIS(PROG_LINE_NUM);
+ PIS(GFX_FIFO_UNDERFLOW);
+ PIS(GFX_END_WIN);
+ PIS(PAL_GAMMA_MASK);
+ PIS(OCP_ERR);
+ PIS(VID1_FIFO_UNDERFLOW);
+ PIS(VID1_END_WIN);
+ PIS(VID2_FIFO_UNDERFLOW);
+ PIS(VID2_END_WIN);
+ PIS(SYNC_LOST);
+ PIS(SYNC_LOST_DIGIT);
+ PIS(WAKEUP);
+#undef PIS
+}
+#else
+void dispc_dump_irqs(struct seq_file *s) { }
+#endif
+
void dispc_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r))
@@ -2665,6 +2723,13 @@
irqstatus = dispc_read_reg(DISPC_IRQSTATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock(&dispc.irq_stats_lock);
+ dispc.irq_stats.irq_count++;
+ dss_collect_irq_stats(irqstatus, dispc.irq_stats.irqs);
+ spin_unlock(&dispc.irq_stats_lock);
+#endif
+
#ifdef DEBUG
if (dss_debug)
print_irq_status(irqstatus);
@@ -3012,6 +3077,11 @@
spin_lock_init(&dispc.irq_lock);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock_init(&dispc.irq_stats_lock);
+ dispc.irq_stats.last_reset = jiffies;
+#endif
+
INIT_WORK(&dispc.error_work, dispc_error_worker);
dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 5936487..6122178 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -204,6 +204,14 @@
struct omap_dss_device *device;
};
+struct dsi_irq_stats {
+ unsigned long last_reset;
+ unsigned irq_count;
+ unsigned dsi_irqs[32];
+ unsigned vc_irqs[4][32];
+ unsigned cio_irqs[32];
+};
+
static struct
{
void __iomem *base;
@@ -258,6 +266,11 @@
#endif
int debug_read;
int debug_write;
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spinlock_t irq_stats_lock;
+ struct dsi_irq_stats irq_stats;
+#endif
} dsi;
#ifdef DEBUG
@@ -528,6 +541,12 @@
irqstatus = dsi_read_reg(DSI_IRQSTATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock(&dsi.irq_stats_lock);
+ dsi.irq_stats.irq_count++;
+ dss_collect_irq_stats(irqstatus, dsi.irq_stats.dsi_irqs);
+#endif
+
if (irqstatus & DSI_IRQ_ERROR_MASK) {
DSSERR("DSI error, irqstatus %x\n", irqstatus);
print_irq_status(irqstatus);
@@ -549,6 +568,10 @@
vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i));
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]);
+#endif
+
if (vcstatus & DSI_VC_IRQ_BTA)
complete(&dsi.bta_completion);
@@ -568,6 +591,10 @@
if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) {
ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ dss_collect_irq_stats(ciostatus, dsi.irq_stats.cio_irqs);
+#endif
+
dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus);
/* flush posted write */
dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
@@ -579,6 +606,10 @@
dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
/* flush posted write */
dsi_read_reg(DSI_IRQSTATUS);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_unlock(&dsi.irq_stats_lock);
+#endif
}
@@ -797,12 +828,12 @@
/* PLL_PWR_STATUS */
while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) {
- udelay(1);
- if (t++ > 1000) {
+ if (++t > 1000) {
DSSERR("Failed to set DSI PLL power mode to %d\n",
state);
return -ENODEV;
}
+ udelay(1);
}
return 0;
@@ -1226,6 +1257,95 @@
enable_clocks(0);
}
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+void dsi_dump_irqs(struct seq_file *s)
+{
+ unsigned long flags;
+ struct dsi_irq_stats stats;
+
+ spin_lock_irqsave(&dsi.irq_stats_lock, flags);
+
+ stats = dsi.irq_stats;
+ memset(&dsi.irq_stats, 0, sizeof(dsi.irq_stats));
+ dsi.irq_stats.last_reset = jiffies;
+
+ spin_unlock_irqrestore(&dsi.irq_stats_lock, flags);
+
+ seq_printf(s, "period %u ms\n",
+ jiffies_to_msecs(jiffies - stats.last_reset));
+
+ seq_printf(s, "irqs %d\n", stats.irq_count);
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]);
+
+ seq_printf(s, "-- DSI interrupts --\n");
+ PIS(VC0);
+ PIS(VC1);
+ PIS(VC2);
+ PIS(VC3);
+ PIS(WAKEUP);
+ PIS(RESYNC);
+ PIS(PLL_LOCK);
+ PIS(PLL_UNLOCK);
+ PIS(PLL_RECALL);
+ PIS(COMPLEXIO_ERR);
+ PIS(HS_TX_TIMEOUT);
+ PIS(LP_RX_TIMEOUT);
+ PIS(TE_TRIGGER);
+ PIS(ACK_TRIGGER);
+ PIS(SYNC_LOST);
+ PIS(LDO_POWER_GOOD);
+ PIS(TA_TIMEOUT);
+#undef PIS
+
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \
+ stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \
+ stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]);
+
+ seq_printf(s, "-- VC interrupts --\n");
+ PIS(CS);
+ PIS(ECC_CORR);
+ PIS(PACKET_SENT);
+ PIS(FIFO_TX_OVF);
+ PIS(FIFO_RX_OVF);
+ PIS(BTA);
+ PIS(ECC_NO_CORR);
+ PIS(FIFO_TX_UDF);
+ PIS(PP_BUSY_CHANGE);
+#undef PIS
+
+#define PIS(x) \
+ seq_printf(s, "%-20s %10d\n", #x, \
+ stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]);
+
+ seq_printf(s, "-- CIO interrupts --\n");
+ PIS(ERRSYNCESC1);
+ PIS(ERRSYNCESC2);
+ PIS(ERRSYNCESC3);
+ PIS(ERRESC1);
+ PIS(ERRESC2);
+ PIS(ERRESC3);
+ PIS(ERRCONTROL1);
+ PIS(ERRCONTROL2);
+ PIS(ERRCONTROL3);
+ PIS(STATEULPS1);
+ PIS(STATEULPS2);
+ PIS(STATEULPS3);
+ PIS(ERRCONTENTIONLP0_1);
+ PIS(ERRCONTENTIONLP1_1);
+ PIS(ERRCONTENTIONLP0_2);
+ PIS(ERRCONTENTIONLP1_2);
+ PIS(ERRCONTENTIONLP0_3);
+ PIS(ERRCONTENTIONLP1_3);
+ PIS(ULPSACTIVENOT_ALL0);
+ PIS(ULPSACTIVENOT_ALL1);
+#undef PIS
+}
+#endif
+
void dsi_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r))
@@ -1321,12 +1441,12 @@
/* PWR_STATUS */
while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) {
- udelay(1);
- if (t++ > 1000) {
+ if (++t > 1000) {
DSSERR("failed to set complexio power state to "
"%d\n", state);
return -ENODEV;
}
+ udelay(1);
}
return 0;
@@ -1526,10 +1646,10 @@
static int _dsi_wait_reset(void)
{
- int i = 0;
+ int t = 0;
while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
- if (i++ > 5) {
+ if (++t > 5) {
DSSERR("soft reset failed\n");
return -ENODEV;
}
@@ -1999,7 +2119,7 @@
return -EINVAL;
}
- data_id = data_type | channel << 6;
+ data_id = data_type | dsi.vc[channel].dest_per << 6;
r = (data_id << 0) | (data << 8) | (ecc << 24);
@@ -2011,7 +2131,7 @@
int dsi_vc_send_null(int channel)
{
u8 nullpkg[] = {0, 0, 0, 0};
- return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
+ return dsi_vc_send_long(channel, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
@@ -2058,7 +2178,7 @@
int r;
if (dsi.debug_read)
- DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd);
+ DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd);
r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
if (r)
@@ -2586,7 +2706,6 @@
/* using fifo not empty */
/* TX_FIFO_NOT_EMPTY */
while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) {
- udelay(1);
fifo_stalls++;
if (fifo_stalls > 0xfffff) {
DSSERR("fifo stalls overflow, pixels left %d\n",
@@ -2594,6 +2713,7 @@
dsi_if_enable(0);
return -EIO;
}
+ udelay(1);
}
#elif 1
/* using fifo emptiness */
@@ -2812,11 +2932,15 @@
static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
{
- int r;
- r = dssdev->driver->enable_te(dssdev, enable);
- /* XXX for some reason, DSI TE breaks if we don't wait here.
- * Panel bug? Needs more studying */
- msleep(100);
+ int r = 0;
+
+ if (dssdev->driver->enable_te) {
+ r = dssdev->driver->enable_te(dssdev, enable);
+ /* XXX for some reason, DSI TE breaks if we don't wait here.
+ * Panel bug? Needs more studying */
+ msleep(100);
+ }
+
return r;
}
@@ -3637,6 +3761,11 @@
spin_lock_init(&dsi.errors_lock);
dsi.errors = 0;
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+ spin_lock_init(&dsi.irq_stats_lock);
+ dsi.irq_stats.last_reset = jiffies;
+#endif
+
init_completion(&dsi.bta_completion);
init_completion(&dsi.update_completion);
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 9b05ee6..0a26b7d 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -467,14 +467,14 @@
static int _omap_dss_wait_reset(void)
{
- unsigned timeout = 1000;
+ int t = 0;
while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) {
- udelay(1);
- if (!--timeout) {
+ if (++t > 1000) {
DSSERR("soft reset failed\n");
return -ENODEV;
}
+ udelay(1);
}
return 0;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 8da5ac4..2bcb124 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -240,6 +240,7 @@
void dsi_exit(void);
void dsi_dump_clocks(struct seq_file *s);
+void dsi_dump_irqs(struct seq_file *s);
void dsi_dump_regs(struct seq_file *s);
void dsi_save_context(void);
@@ -268,6 +269,7 @@
int dispc_init(void);
void dispc_exit(void);
void dispc_dump_clocks(struct seq_file *s);
+void dispc_dump_irqs(struct seq_file *s);
void dispc_dump_regs(struct seq_file *s);
void dispc_irq_handler(void);
void dispc_fake_vsync_irq(void);
@@ -367,4 +369,16 @@
unsigned long rfbi_get_max_tx_rate(void);
int rfbi_init_display(struct omap_dss_device *display);
+
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
+static inline void dss_collect_irq_stats(u32 irqstatus, unsigned *irq_arr)
+{
+ int b;
+ for (b = 0; b < 32; ++b) {
+ if (irqstatus & (1 << b))
+ irq_arr[b]++;
+ }
+}
+#endif
+
#endif
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index d0b3006..b936495 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -120,7 +120,7 @@
struct omap_dss_device *dssdev[2];
- struct kfifo *cmd_fifo;
+ struct kfifo cmd_fifo;
spinlock_t cmd_lock;
struct completion cmd_done;
atomic_t cmd_fifo_full;
@@ -1011,20 +1011,20 @@
return;
while (true) {
- spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+ spin_lock_irqsave(&rfbi.cmd_lock, flags);
- len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
+ len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p,
sizeof(struct update_param));
if (len == 0) {
DSSDBG("nothing more in fifo\n");
atomic_set(&rfbi.cmd_pending, 0);
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
break;
}
/* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
BUG_ON(len != sizeof(struct update_param));
BUG_ON(p.rfbi_module > 1);
@@ -1052,25 +1052,25 @@
unsigned long flags;
int available;
- spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+ spin_lock_irqsave(&rfbi.cmd_lock, flags);
available = RFBI_CMD_FIFO_LEN_BYTES -
- __kfifo_len(rfbi.cmd_fifo);
+ kfifo_len(&rfbi.cmd_fifo);
/* DSSDBG("%d bytes left in fifo\n", available); */
if (available < sizeof(struct update_param)) {
DSSDBG("Going to wait because FIFO FULL..\n");
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
atomic_inc(&rfbi.cmd_fifo_full);
wait_for_completion(&rfbi.cmd_done);
/*DSSDBG("Woke up because fifo not full anymore\n");*/
continue;
}
- ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
+ ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p,
sizeof(struct update_param));
/* DSSDBG("pushed %d bytes\n", ret);*/
- spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
BUG_ON(ret != sizeof(struct update_param));
@@ -1155,12 +1155,12 @@
{
u32 rev;
u32 l;
+ int r;
spin_lock_init(&rfbi.cmd_lock);
- rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
- &rfbi.cmd_lock);
- if (IS_ERR(rfbi.cmd_fifo))
- return -ENOMEM;
+ r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL);
+ if (r)
+ return r;
init_completion(&rfbi.cmd_done);
atomic_set(&rfbi.cmd_fifo_full, 0);
@@ -1196,7 +1196,7 @@
{
DSSDBG("rfbi_exit\n");
- kfifo_free(rfbi.cmd_fifo);
+ kfifo_free(&rfbi.cmd_fifo);
iounmap(rfbi.base);
}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ef29983..d17caef 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1311,6 +1311,7 @@
if (rg->vrfb.vaddr[0]) {
iounmap(rg->vrfb.vaddr[0]);
omap_vrfb_release_ctx(&rg->vrfb);
+ rg->vrfb.vaddr[0] = NULL;
}
}
@@ -2114,6 +2115,11 @@
dssdev = NULL;
for_each_dss_dev(dssdev) {
omap_dss_get_device(dssdev);
+ if (!dssdev->driver) {
+ dev_err(&pdev->dev, "no driver for display\n");
+ r = -EINVAL;
+ goto cleanup;
+ }
fbdev->displays[fbdev->num_displays++] = dssdev;
}
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 415858b..825b665 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1221,9 +1221,9 @@
static int pxafb_smart_thread(void *arg)
{
struct pxafb_info *fbi = arg;
- struct pxafb_mach_info *inf;
+ struct pxafb_mach_info *inf = fbi->dev->platform_data;
- if (!fbi || !fbi->dev->platform_data->smart_update) {
+ if (!inf->smart_update) {
pr_err("%s: not properly initialized, thread terminated\n",
__func__);
return -EINVAL;
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index adf9632..53cb722 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,21 +211,23 @@
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
- * @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
-static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
{
- struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
+ unsigned long long tmp;
unsigned int result;
- pixclk *= win->win_mode.refresh;
- result = clk / pixclk;
+ tmp = (unsigned long long)clk;
+ tmp *= pixclk;
+
+ do_div(tmp, 1000000000UL);
+ result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
@@ -301,7 +303,7 @@
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
- clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
+ clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index 9d4f3a4..d5077df 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -137,7 +137,7 @@
tmp, dst_pitch);
return -EINVAL;
}
- tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
+ tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
writel(tmp, engine + 0x38);
if (op == VIA_BITBLT_FILL)
@@ -352,6 +352,9 @@
viapar->shared->vq_vram_addr = viapar->fbmem_free;
viapar->fbmem_used += VQ_SIZE;
+ /* Init 2D engine reg to reset 2D engine */
+ writel(0x0, engine + VIA_REG_KEYCONTROL);
+
/* Init AGP and VQ regs */
switch (chip_name) {
case UNICHROME_K8M890:
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index d8df17a..3028e7d 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -177,16 +177,15 @@
}
if (vmode_index != VIA_RES_INVALID) {
- viafb_setmode(vmode_index, info->var.xres, info->var.yres,
- info->var.bits_per_pixel, vmode_index1,
- viafb_second_xres, viafb_second_yres, viafb_bpp1);
-
viafb_update_fix(info);
viafb_bpp = info->var.bits_per_pixel;
if (info->var.accel_flags & FB_ACCELF_TEXT)
info->flags &= ~FBINFO_HWACCEL_DISABLED;
else
info->flags |= FBINFO_HWACCEL_DISABLED;
+ viafb_setmode(vmode_index, info->var.xres, info->var.yres,
+ info->var.bits_per_pixel, vmode_index1,
+ viafb_second_xres, viafb_second_yres, viafb_bpp1);
}
return 0;
@@ -872,7 +871,9 @@
if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo)
return -ENODEV;
- if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2)
+ /* LCD ouput does not support hw cursors (at least on VN896) */
+ if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) ||
+ viafb_LCD_ON)
return -ENODEV;
viafb_show_hw_cursor(info, HW_Cursor_OFF);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9dd5880..505be88 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -266,7 +266,7 @@
static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
-static struct virtio_driver virtio_balloon = {
+static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
@@ -279,12 +279,12 @@
static int __init init(void)
{
- return register_virtio_driver(&virtio_balloon);
+ return register_virtio_driver(&virtio_balloon_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_balloon);
+ unregister_virtio_driver(&virtio_balloon_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index c8a3bec..4bdb7f1 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -29,8 +29,9 @@
* document number 313056-003, 313057-017: 82801H (ICH8)
* document number 316972-004, 316973-012: 82801I (ICH9)
* document number 319973-002, 319974-002: 82801J (ICH10)
- * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH)
+ * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
+ * document number TBD : Cougar Point (CPT)
*/
/*
@@ -100,8 +101,22 @@
TCO_ICH10DO, /* ICH10DO */
TCO_PCH, /* PCH Desktop Full Featured */
TCO_PCHM, /* PCH Mobile Full Featured */
+ TCO_P55, /* P55 */
+ TCO_PM55, /* PM55 */
+ TCO_H55, /* H55 */
+ TCO_QM57, /* QM57 */
+ TCO_H57, /* H57 */
+ TCO_HM55, /* HM55 */
+ TCO_Q57, /* Q57 */
+ TCO_HM57, /* HM57 */
TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */
+ TCO_QS57, /* QS57 */
+ TCO_3400, /* 3400 */
+ TCO_3420, /* 3420 */
+ TCO_3450, /* 3450 */
TCO_EP80579, /* EP80579 */
+ TCO_CPTD, /* CPT Desktop */
+ TCO_CPTM, /* CPT Mobile */
};
static struct {
@@ -144,8 +159,22 @@
{"ICH10DO", 2},
{"PCH Desktop Full Featured", 2},
{"PCH Mobile Full Featured", 2},
+ {"P55", 2},
+ {"PM55", 2},
+ {"H55", 2},
+ {"QM57", 2},
+ {"H57", 2},
+ {"HM55", 2},
+ {"Q57", 2},
+ {"HM57", 2},
{"PCH Mobile SFF Full Featured", 2},
+ {"QS57", 2},
+ {"3400", 2},
+ {"3420", 2},
+ {"3450", 2},
{"EP80579", 2},
+ {"CPT Desktop", 2},
+ {"CPT Mobile", 2},
{NULL, 0}
};
@@ -216,8 +245,22 @@
{ ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)},
{ ITCO_PCI_DEVICE(0x3b00, TCO_PCH)},
{ ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)},
+ { ITCO_PCI_DEVICE(0x3b02, TCO_P55)},
+ { ITCO_PCI_DEVICE(0x3b03, TCO_PM55)},
+ { ITCO_PCI_DEVICE(0x3b06, TCO_H55)},
+ { ITCO_PCI_DEVICE(0x3b07, TCO_QM57)},
+ { ITCO_PCI_DEVICE(0x3b08, TCO_H57)},
+ { ITCO_PCI_DEVICE(0x3b09, TCO_HM55)},
+ { ITCO_PCI_DEVICE(0x3b0a, TCO_Q57)},
+ { ITCO_PCI_DEVICE(0x3b0b, TCO_HM57)},
{ ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)},
+ { ITCO_PCI_DEVICE(0x3b0f, TCO_QS57)},
+ { ITCO_PCI_DEVICE(0x3b12, TCO_3400)},
+ { ITCO_PCI_DEVICE(0x3b14, TCO_3420)},
+ { ITCO_PCI_DEVICE(0x3b16, TCO_3450)},
{ ITCO_PCI_DEVICE(0x5031, TCO_EP80579)},
+ { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)},
+ { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index c499793..5d42d55 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,15 +102,15 @@
goto out_thaw;
}
+ printk(KERN_DEBUG "suspending xenstore...\n");
+ xs_suspend();
+
err = dpm_suspend_noirq(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
goto out_resume;
}
- printk(KERN_DEBUG "suspending xenstore...\n");
- xs_suspend();
-
err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
dpm_resume_noirq(PMSG_RESUME);
@@ -120,13 +120,13 @@
cancelled = 1;
}
+out_resume:
if (!cancelled) {
xen_arch_resume();
xs_resume();
} else
xs_suspend_cancel();
-out_resume:
dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
diff --git a/firmware/Makefile b/firmware/Makefile
index 6d5c3ab..1c00d05 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -69,7 +69,8 @@
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
cis/DP83903.cis cis/NE2K.cis \
- cis/tamarack.cis cis/PE-200.cis
+ cis/tamarack.cis cis/PE-200.cis \
+ cis/PE520.cis
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 34b5d0a..ac174fe 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -601,6 +601,7 @@
cis/NE2K.cis
cis/tamarack.cis
cis/PE-200.cis
+ cis/PE520.cis
Licence: GPL
diff --git a/firmware/cis/PE520.cis.ihex b/firmware/cis/PE520.cis.ihex
new file mode 100644
index 0000000..97a745b
--- /dev/null
+++ b/firmware/cis/PE520.cis.ihex
@@ -0,0 +1,9 @@
+:1000000001030000FF152304014B544900504535FE
+:10001000323020504C55530050434D434941204508
+:10002000746865726E65740000FF20046101100041
+:10003000210206001A050101D00F0B1B09C101198D
+:0A00400001556530FFFF1400FF00BA
+:00000001FF
+#
+# Replacement CIS for PE520 ethernet card
+#
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 18f74ec..9d03d1e 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1001,44 +1001,6 @@
}
/**
- * v9fs_vfs_readlink - read a symlink's location
- * @dentry: dentry for symlink
- * @buffer: buffer to load symlink location into
- * @buflen: length of buffer
- *
- */
-
-static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
- int buflen)
-{
- int retval;
- int ret;
- char *link = __getname();
-
- if (unlikely(!link))
- return -ENOMEM;
-
- if (buflen > PATH_MAX)
- buflen = PATH_MAX;
-
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
- dentry);
-
- retval = v9fs_readlink(dentry, link, buflen);
-
- if (retval > 0) {
- if ((ret = copy_to_user(buffer, link, retval)) != 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "problem copying to user: %d\n", ret);
- retval = ret;
- }
- }
-
- __putname(link);
- return retval;
-}
-
-/**
* v9fs_vfs_follow_link - follow a symlink path
* @dentry: dentry for symlink
* @nd: nameidata
@@ -1230,7 +1192,6 @@
.rmdir = v9fs_vfs_rmdir,
.mknod = v9fs_vfs_mknod,
.rename = v9fs_vfs_rename,
- .readlink = v9fs_vfs_readlink,
.getattr = v9fs_vfs_getattr,
.setattr = v9fs_vfs_setattr,
};
@@ -1253,7 +1214,7 @@
};
static const struct inode_operations v9fs_symlink_inode_operations = {
- .readlink = v9fs_vfs_readlink,
+ .readlink = generic_readlink,
.follow_link = v9fs_vfs_follow_link,
.put_link = v9fs_vfs_put_link,
.getattr = v9fs_vfs_getattr,
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 7dc8599..c57d9ce 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -171,6 +171,9 @@
#ifdef ELF_FDPIC_PLAT_INIT
unsigned long dynaddr;
#endif
+#ifndef CONFIG_MMU
+ unsigned long stack_prot;
+#endif
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
int executable_stack;
@@ -316,6 +319,8 @@
* defunct, deceased, etc. after this point we have to exit via
* error_kill */
set_personality(PER_LINUX_FDPIC);
+ if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
+ current->personality |= READ_IMPLIES_EXEC;
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
@@ -377,9 +382,13 @@
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
+ stack_prot = PROT_READ | PROT_WRITE;
+ if (executable_stack == EXSTACK_ENABLE_X ||
+ (executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC))
+ stack_prot |= PROT_EXEC;
+
down_write(¤t->mm->mmap_sem);
- current->mm->start_brk = do_mmap(NULL, 0, stack_size,
- PROT_READ | PROT_WRITE | PROT_EXEC,
+ current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot,
MAP_PRIVATE | MAP_ANONYMOUS |
MAP_UNINITIALIZED | MAP_GROWSDOWN,
0);
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index fea9e89..b44ce0a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -269,7 +269,7 @@
int err;
mntget(newmnt);
- err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
+ err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags | MNT_SHRINKABLE, mntlist);
switch (err) {
case 0:
path_put(&nd->path);
@@ -371,7 +371,6 @@
if (IS_ERR(mnt))
goto out_err;
- nd->path.mnt->mnt_flags |= MNT_SHRINKABLE;
rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list);
out:
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index c8afa6b..32a5f46 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -121,8 +121,10 @@
ret = -ENOENT;
path_put(path);
}
- } else
+ } else {
ret = -EPERM;
+ path_put(path);
+ }
}
return ret;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 429ca0b..7f85450 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -715,31 +715,31 @@
/* Released in ecryptfs_put_link(); only release here on error */
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- rc = -ENOMEM;
+ buf = ERR_PTR(-ENOMEM);
goto out;
}
old_fs = get_fs();
set_fs(get_ds());
rc = dentry->d_inode->i_op->readlink(dentry, (char __user *)buf, len);
set_fs(old_fs);
- if (rc < 0)
- goto out_free;
- else
+ if (rc < 0) {
+ kfree(buf);
+ buf = ERR_PTR(rc);
+ } else
buf[rc] = '\0';
- rc = 0;
- nd_set_link(nd, buf);
- goto out;
-out_free:
- kfree(buf);
out:
- return ERR_PTR(rc);
+ nd_set_link(nd, buf);
+ return NULL;
}
static void
ecryptfs_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
- /* Free the char* */
- kfree(nd_get_link(nd));
+ char *buf = nd_get_link(nd);
+ if (!IS_ERR(buf)) {
+ /* Free the char* */
+ kfree(buf);
+ }
}
/**
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 698a863..2afbceb 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -738,13 +738,28 @@
fsdata);
}
+static int exofs_write_end(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata)
+{
+ struct inode *inode = mapping->host;
+ /* According to comment in simple_write_end i_mutex is held */
+ loff_t i_size = inode->i_size;
+ int ret;
+
+ ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata);
+ if (i_size != inode->i_size)
+ mark_inode_dirty(inode);
+ return ret;
+}
+
const struct address_space_operations exofs_aops = {
.readpage = exofs_readpage,
.readpages = exofs_readpages,
.writepage = exofs_writepage,
.writepages = exofs_writepages,
.write_begin = exofs_write_begin_export,
- .write_end = simple_write_end,
+ .write_end = exofs_write_end,
};
/******************************************************************************
diff --git a/fs/exofs/pnfs.h b/fs/exofs/pnfs.h
index 423033a..c52e988 100644
--- a/fs/exofs/pnfs.h
+++ b/fs/exofs/pnfs.h
@@ -15,13 +15,7 @@
#ifndef __EXOFS_PNFS_H__
#define __EXOFS_PNFS_H__
-#if defined(CONFIG_PNFS)
-
-
-/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */
-#include "../nfs/objlayout/pnfs_osd_xdr.h"
-
-#else /* defined(CONFIG_PNFS) */
+#if ! defined(__PNFS_OSD_XDR_H__)
enum pnfs_iomode {
IOMODE_READ = 1,
@@ -46,6 +40,6 @@
u32 odm_raid_algorithm;
};
-#endif /* else defined(CONFIG_PNFS) */
+#endif /* ! defined(__PNFS_OSD_XDR_H__) */
#endif /* __EXOFS_PNFS_H__ */
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 2cf93ec..97e01dc 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -618,60 +618,90 @@
static struct kmem_cache *fasync_cache __read_mostly;
/*
- * fasync_helper() is used by almost all character device drivers
- * to set up the fasync queue. It returns negative on error, 0 if it did
- * no changes and positive if it added/deleted the entry.
+ * Remove a fasync entry. If successfully removed, return
+ * positive and clear the FASYNC flag. If no entry exists,
+ * do nothing and return 0.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ *
+ * We always take the 'filp->f_lock', in since fasync_lock
+ * needs to be irq-safe.
*/
-int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+static int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp)
{
struct fasync_struct *fa, **fp;
- struct fasync_struct *new = NULL;
int result = 0;
- if (on) {
- new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
- if (!new)
- return -ENOMEM;
- }
-
- /*
- * We need to take f_lock first since it's not an IRQ-safe
- * lock.
- */
spin_lock(&filp->f_lock);
write_lock_irq(&fasync_lock);
for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
- if (fa->fa_file == filp) {
- if(on) {
- fa->fa_fd = fd;
- kmem_cache_free(fasync_cache, new);
- } else {
- *fp = fa->fa_next;
- kmem_cache_free(fasync_cache, fa);
- result = 1;
- }
- goto out;
- }
- }
-
- if (on) {
- new->magic = FASYNC_MAGIC;
- new->fa_file = filp;
- new->fa_fd = fd;
- new->fa_next = *fapp;
- *fapp = new;
- result = 1;
- }
-out:
- if (on)
- filp->f_flags |= FASYNC;
- else
+ if (fa->fa_file != filp)
+ continue;
+ *fp = fa->fa_next;
+ kmem_cache_free(fasync_cache, fa);
filp->f_flags &= ~FASYNC;
+ result = 1;
+ break;
+ }
write_unlock_irq(&fasync_lock);
spin_unlock(&filp->f_lock);
return result;
}
+/*
+ * Add a fasync entry. Return negative on error, positive if
+ * added, and zero if did nothing but change an existing one.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ */
+static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp)
+{
+ struct fasync_struct *new, *fa, **fp;
+ int result = 0;
+
+ new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ spin_lock(&filp->f_lock);
+ write_lock_irq(&fasync_lock);
+ for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
+ if (fa->fa_file != filp)
+ continue;
+ fa->fa_fd = fd;
+ kmem_cache_free(fasync_cache, new);
+ goto out;
+ }
+
+ new->magic = FASYNC_MAGIC;
+ new->fa_file = filp;
+ new->fa_fd = fd;
+ new->fa_next = *fapp;
+ *fapp = new;
+ result = 1;
+ filp->f_flags |= FASYNC;
+
+out:
+ write_unlock_irq(&fasync_lock);
+ spin_unlock(&filp->f_lock);
+ return result;
+}
+
+/*
+ * fasync_helper() is used by almost all character device drivers
+ * to set up the fasync queue, and for regular files by the file
+ * lease code. It returns negative on error, 0 if it did no changes
+ * and positive if it added/deleted the entry.
+ */
+int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+{
+ if (!on)
+ return fasync_remove_entry(filp, fapp);
+ return fasync_add_entry(fd, filp, fapp);
+}
+
EXPORT_SYMBOL(fasync_helper);
void __kill_fasync(struct fasync_struct *fa, int sig, int band)
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 4eb308a..a6abbae 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -569,6 +569,40 @@
return ret;
}
+/**
+ * gfs2_file_aio_write - Perform a write to a file
+ * @iocb: The io context
+ * @iov: The data to write
+ * @nr_segs: Number of @iov segments
+ * @pos: The file position
+ *
+ * We have to do a lock/unlock here to refresh the inode size for
+ * O_APPEND writes, otherwise we can land up writing at the wrong
+ * offset. There is still a race, but provided the app is using its
+ * own file locking, this will make O_APPEND work as expected.
+ *
+ */
+
+static ssize_t gfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct file *file = iocb->ki_filp;
+
+ if (file->f_flags & O_APPEND) {
+ struct dentry *dentry = file->f_dentry;
+ struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
+ struct gfs2_holder gh;
+ int ret;
+
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
+ if (ret)
+ return ret;
+ gfs2_glock_dq_uninit(&gh);
+ }
+
+ return generic_file_aio_write(iocb, iov, nr_segs, pos);
+}
+
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
/**
@@ -711,7 +745,7 @@
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.write = do_sync_write,
- .aio_write = generic_file_aio_write,
+ .aio_write = gfs2_file_aio_write,
.unlocked_ioctl = gfs2_ioctl,
.mmap = gfs2_mmap,
.open = gfs2_open,
@@ -741,7 +775,7 @@
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.write = do_sync_write,
- .aio_write = generic_file_aio_write,
+ .aio_write = gfs2_file_aio_write,
.unlocked_ioctl = gfs2_ioctl,
.mmap = gfs2_mmap,
.open = gfs2_open,
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index cb8d7a9..6f68a5f 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -121,7 +121,7 @@
if (aspace) {
mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS);
aspace->i_mapping->a_ops = &aspace_aops;
- aspace->i_size = ~0ULL;
+ aspace->i_size = MAX_LFS_FILESIZE;
ip = GFS2_I(aspace);
clear_bit(GIF_USER, &ip->i_flags);
insert_inode_hash(aspace);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 247436c..78f73ca 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -748,7 +748,7 @@
struct gfs2_rgrpd *nrgd;
unsigned int num_gh;
int dir_rename = 0;
- int alloc_required;
+ int alloc_required = 0;
unsigned int x;
int error;
@@ -867,7 +867,9 @@
goto out_gunlock;
}
- alloc_required = error = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+ if (nip == NULL)
+ alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+ error = alloc_required;
if (error < 0)
goto out_gunlock;
error = 0;
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index 8a04108..c2ebdf2 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -1296,6 +1296,7 @@
int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_ea_location el;
struct buffer_head *dibh;
int error;
@@ -1305,16 +1306,17 @@
return error;
if (GFS2_EA_IS_STUFFED(el.el_ea)) {
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
- if (error)
- return error;
-
- gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1);
- memcpy(GFS2_EA2DATA(el.el_ea), data,
- GFS2_EA_DATA_LEN(el.el_ea));
- } else
+ error = gfs2_trans_begin(sdp, RES_DINODE + RES_EATTR, 0);
+ if (error == 0) {
+ gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1);
+ memcpy(GFS2_EA2DATA(el.el_ea), data,
+ GFS2_EA_DATA_LEN(el.el_ea));
+ }
+ } else {
error = ea_acl_chmod_unstuffed(ip, el.el_ea, data);
+ }
+ brelse(el.el_bh);
if (error)
return error;
@@ -1327,8 +1329,7 @@
brelse(dibh);
}
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
-
+ gfs2_trans_end(sdp);
return error;
}
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index a5089a6..7239efc 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -646,22 +646,27 @@
static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
buflen);
}
static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
}
+static void hppfs_put_link(struct dentry *dentry, struct nameidata *nd,
+ void *cookie)
+{
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+
+ if (proc_dentry->d_inode->i_op->put_link)
+ proc_dentry->d_inode->i_op->put_link(proc_dentry, nd, cookie);
+}
+
static const struct inode_operations hppfs_dir_iops = {
.lookup = hppfs_lookup,
};
@@ -669,6 +674,7 @@
static const struct inode_operations hppfs_link_iops = {
.readlink = hppfs_readlink,
.follow_link = hppfs_follow_link,
+ .put_link = hppfs_put_link,
};
static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
diff --git a/fs/namei.c b/fs/namei.c
index b55440b..94a5e60 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -561,6 +561,7 @@
dget(dentry);
}
mntget(path->mnt);
+ nd->last_type = LAST_BIND;
cookie = dentry->d_inode->i_op->follow_link(dentry, nd);
error = PTR_ERR(cookie);
if (!IS_ERR(cookie)) {
@@ -1603,11 +1604,12 @@
struct file *filp;
struct nameidata nd;
int error;
- struct path path, save;
+ struct path path;
struct dentry *dir;
int count = 0;
int will_truncate;
int flag = open_to_namei_flags(open_flag);
+ int force_reval = 0;
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
@@ -1619,7 +1621,7 @@
open_flag |= O_DSYNC;
if (!acc_mode)
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ acc_mode = MAY_OPEN | ACC_MODE(open_flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
@@ -1659,9 +1661,12 @@
/*
* Create - we need to know the parent.
*/
+reval:
error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
if (error)
return ERR_PTR(error);
+ if (force_reval)
+ nd.flags |= LOOKUP_REVAL;
error = path_walk(pathname, &nd);
if (error) {
if (nd.root.mnt)
@@ -1853,17 +1858,7 @@
error = security_inode_follow_link(path.dentry, &nd);
if (error)
goto exit_dput;
- save = nd.path;
- path_get(&save);
error = __do_follow_link(&path, &nd);
- if (error == -ESTALE) {
- /* nd.path had been dropped */
- nd.path = save;
- path_get(&nd.path);
- nd.flags |= LOOKUP_REVAL;
- error = __do_follow_link(&path, &nd);
- }
- path_put(&save);
path_put(&path);
if (error) {
/* Does someone understand code flow here? Or it is only
@@ -1873,6 +1868,10 @@
release_open_intent(&nd);
if (nd.root.mnt)
path_put(&nd.root);
+ if (error == -ESTALE && !force_reval) {
+ force_reval = 1;
+ goto reval;
+ }
return ERR_PTR(error);
}
nd.flags &= ~LOOKUP_PARENT;
diff --git a/fs/namespace.c b/fs/namespace.c
index 7d70d63..c768f73 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -965,10 +965,12 @@
int may_umount(struct vfsmount *mnt)
{
int ret = 1;
+ down_read(&namespace_sem);
spin_lock(&vfsmount_lock);
if (propagate_mount_busy(mnt, 2))
ret = 0;
spin_unlock(&vfsmount_lock);
+ up_read(&namespace_sem);
return ret;
}
@@ -1352,12 +1354,12 @@
if (err)
goto out_cleanup_ids;
+ spin_lock(&vfsmount_lock);
+
if (IS_MNT_SHARED(dest_mnt)) {
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
set_mnt_shared(p);
}
-
- spin_lock(&vfsmount_lock);
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
@@ -1534,8 +1536,12 @@
err = change_mount_flags(path->mnt, flags);
else
err = do_remount_sb(sb, flags, data, 0);
- if (!err)
+ if (!err) {
+ spin_lock(&vfsmount_lock);
+ mnt_flags |= path->mnt->mnt_flags & MNT_PNODE_MASK;
path->mnt->mnt_flags = mnt_flags;
+ spin_unlock(&vfsmount_lock);
+ }
up_write(&sb->s_umount);
if (!err) {
security_sb_post_remount(path->mnt, flags, data);
@@ -1665,6 +1671,8 @@
{
int err;
+ mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD);
+
down_write(&namespace_sem);
/* Something was mounted here while we slept */
while (d_mountpoint(path->dentry) &&
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2c5ace4..3c7f03b 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1615,6 +1615,7 @@
goto out;
new_dentry = dentry;
+ rehash = NULL;
new_inode = NULL;
}
}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 7c2e337..c194793 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -780,12 +780,9 @@
int (*fsync) (struct file *, struct dentry *, int);
int err;
- err = filemap_fdatawrite(inode->i_mapping);
+ err = filemap_write_and_wait(inode->i_mapping);
if (err == 0 && fop && (fsync = fop->fsync))
err = fsync(filp, dp, 0);
- if (err == 0)
- err = filemap_fdatawait(inode->i_mapping);
-
return err;
}
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index c9ee67b..1afb0a1 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -121,7 +121,7 @@
if (warned)
return 0;
- warned = false;
+ warned = true;
entry = p;
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 8271cf0..a94e8bd 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -552,7 +552,7 @@
spin_lock(&group->inotify_data.idr_lock);
ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd,
+ group->inotify_data.last_wd+1,
&tmp_ientry->wd);
spin_unlock(&group->inotify_data.idr_lock);
if (ret) {
@@ -632,7 +632,7 @@
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 1;
+ group->inotify_data.last_wd = 0;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
diff --git a/fs/proc/array.c b/fs/proc/array.c
index f560325..13b5d07 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -327,94 +327,6 @@
p->nivcsw);
}
-#ifdef CONFIG_MMU
-
-struct stack_stats {
- struct vm_area_struct *vma;
- unsigned long startpage;
- unsigned long usage;
-};
-
-static int stack_usage_pte_range(pmd_t *pmd, unsigned long addr,
- unsigned long end, struct mm_walk *walk)
-{
- struct stack_stats *ss = walk->private;
- struct vm_area_struct *vma = ss->vma;
- pte_t *pte, ptent;
- spinlock_t *ptl;
- int ret = 0;
-
- pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
- for (; addr != end; pte++, addr += PAGE_SIZE) {
- ptent = *pte;
-
-#ifdef CONFIG_STACK_GROWSUP
- if (pte_present(ptent) || is_swap_pte(ptent))
- ss->usage = addr - ss->startpage + PAGE_SIZE;
-#else
- if (pte_present(ptent) || is_swap_pte(ptent)) {
- ss->usage = ss->startpage - addr + PAGE_SIZE;
- pte++;
- ret = 1;
- break;
- }
-#endif
- }
- pte_unmap_unlock(pte - 1, ptl);
- cond_resched();
- return ret;
-}
-
-static inline unsigned long get_stack_usage_in_bytes(struct vm_area_struct *vma,
- struct task_struct *task)
-{
- struct stack_stats ss;
- struct mm_walk stack_walk = {
- .pmd_entry = stack_usage_pte_range,
- .mm = vma->vm_mm,
- .private = &ss,
- };
-
- if (!vma->vm_mm || is_vm_hugetlb_page(vma))
- return 0;
-
- ss.vma = vma;
- ss.startpage = task->stack_start & PAGE_MASK;
- ss.usage = 0;
-
-#ifdef CONFIG_STACK_GROWSUP
- walk_page_range(KSTK_ESP(task) & PAGE_MASK, vma->vm_end,
- &stack_walk);
-#else
- walk_page_range(vma->vm_start, (KSTK_ESP(task) & PAGE_MASK) + PAGE_SIZE,
- &stack_walk);
-#endif
- return ss.usage;
-}
-
-static inline void task_show_stack_usage(struct seq_file *m,
- struct task_struct *task)
-{
- struct vm_area_struct *vma;
- struct mm_struct *mm = get_task_mm(task);
-
- if (mm) {
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, task->stack_start);
- if (vma)
- seq_printf(m, "Stack usage:\t%lu kB\n",
- get_stack_usage_in_bytes(vma, task) >> 10);
-
- up_read(&mm->mmap_sem);
- mmput(mm);
- }
-}
-#else
-static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
-{
-}
-#endif /* CONFIG_MMU */
-
static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
{
seq_printf(m, "Cpus_allowed:\t");
@@ -445,7 +357,6 @@
task_show_regs(m, task);
#endif
task_context_switch_counts(m, task);
- task_show_stack_usage(m, task);
return 0;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 18d5cc6..e42bbd8 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1419,7 +1419,6 @@
goto out;
error = PROC_I(inode)->op.proc_get_link(inode, &nd->path);
- nd->last_type = LAST_BIND;
out:
return ERR_PTR(error);
}
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 47c03f4..f277c4a 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -361,12 +361,11 @@
if (!pte_present(ptent))
continue;
- mss->resident += PAGE_SIZE;
-
page = vm_normal_page(vma, addr, ptent);
if (!page)
continue;
+ mss->resident += PAGE_SIZE;
/* Accumulate the size in pages that have been accessed. */
if (pte_young(ptent) || PageReferenced(page))
mss->referenced += PAGE_SIZE;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index dea86ab..3fc62b0 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1377,6 +1377,9 @@
static qsize_t inode_get_rsv_space(struct inode *inode)
{
qsize_t ret;
+
+ if (!inode->i_sb->dq_op->get_reserved_space)
+ return 0;
spin_lock(&inode->i_lock);
ret = *inode_reserved_space(inode);
spin_unlock(&inode->i_lock);
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 2efc571..1739a4a 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -123,30 +123,6 @@
/*****************************************************************************/
/*
- * check that file shrinkage doesn't leave any VMAs dangling in midair
- */
-static int ramfs_nommu_check_mappings(struct inode *inode,
- size_t newsize, size_t size)
-{
- struct vm_area_struct *vma;
- struct prio_tree_iter iter;
-
- /* search for VMAs that fall within the dead zone */
- vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
- newsize >> PAGE_SHIFT,
- (size + PAGE_SIZE - 1) >> PAGE_SHIFT
- ) {
- /* found one - only interested if it's shared out of the page
- * cache */
- if (vma->vm_flags & VM_SHARED)
- return -ETXTBSY; /* not quite true, but near enough */
- }
-
- return 0;
-}
-
-/*****************************************************************************/
-/*
*
*/
static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size)
@@ -164,7 +140,7 @@
/* check that a decrease in size doesn't cut off any shared mappings */
if (newsize < size) {
- ret = ramfs_nommu_check_mappings(inode, newsize, size);
+ ret = nommu_shrink_inode_mappings(inode, size, newsize);
if (ret < 0)
return ret;
}
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 1150ebb..9087b10 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -3062,13 +3062,14 @@
int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
- int error;
unsigned int ia_valid;
+ int depth;
+ int error;
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
- reiserfs_write_lock(inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (attr->ia_valid & ATTR_SIZE) {
/* version 2 items will be caught by the s_maxbytes check
** done for us in vmtruncate
@@ -3149,8 +3150,17 @@
journal_end(&th, inode->i_sb, jbegin_count);
}
}
- if (!error)
+ if (!error) {
+ /*
+ * Relax the lock here, as it might truncate the
+ * inode pages and wait for inode pages locks.
+ * To release such page lock, the owner needs the
+ * reiserfs lock
+ */
+ reiserfs_write_unlock_once(inode->i_sb, depth);
error = inode_setattr(inode, attr);
+ depth = reiserfs_write_lock_once(inode->i_sb);
+ }
}
if (!error && reiserfs_posixacl(inode->i_sb)) {
@@ -3159,7 +3169,8 @@
}
out:
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
+
return error;
}
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index ace7745..f53505d 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -104,9 +104,10 @@
err = put_user(inode->i_generation, (int __user *)arg);
break;
case REISERFS_IOC_SETVERSION:
- if (!is_owner_or_cap(inode))
+ if (!is_owner_or_cap(inode)) {
err = -EPERM;
break;
+ }
err = mnt_want_write(filp->f_path.mnt);
if (err)
break;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index c3b004e..81f09fa 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -452,7 +452,9 @@
}
if (dentry->d_inode) {
+ reiserfs_write_lock(inode->i_sb);
err = xattr_unlink(xadir->d_inode, dentry);
+ reiserfs_write_unlock(inode->i_sb);
update_ctime(inode);
}
@@ -486,17 +488,21 @@
if (get_inode_sd_version(inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
- if (!buffer)
- return lookup_and_delete_xattr(inode, name);
-
reiserfs_write_unlock(inode->i_sb);
+
+ if (!buffer) {
+ err = lookup_and_delete_xattr(inode, name);
+ reiserfs_write_lock(inode->i_sb);
+ return err;
+ }
+
dentry = xattr_lookup(inode, name, flags);
if (IS_ERR(dentry)) {
reiserfs_write_lock(inode->i_sb);
return PTR_ERR(dentry);
}
- down_read(&REISERFS_I(inode)->i_xattr_sem);
+ down_write(&REISERFS_I(inode)->i_xattr_sem);
reiserfs_write_lock(inode->i_sb);
@@ -554,8 +560,12 @@
.ia_size = buffer_size,
.ia_valid = ATTR_SIZE | ATTR_CTIME,
};
+
+ reiserfs_write_unlock(inode->i_sb);
mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_XATTR);
down_write(&dentry->d_inode->i_alloc_sem);
+ reiserfs_write_lock(inode->i_sb);
+
err = reiserfs_setattr(dentry, &newattrs);
up_write(&dentry->d_inode->i_alloc_sem);
mutex_unlock(&dentry->d_inode->i_mutex);
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index cc32e6a..dd20a78 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -455,7 +455,9 @@
return 0;
}
+ reiserfs_write_unlock(inode->i_sb);
acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS);
+ reiserfs_write_lock(inode->i_sb);
if (!acl)
return 0;
if (IS_ERR(acl))
diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index 618c270..e5a3d8e 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -54,6 +54,7 @@
*/
#include <linux/pagemap.h>
+#include <linux/list_sort.h>
#include "ubifs.h"
/*
@@ -108,101 +109,6 @@
}
/**
- * list_sort - sort a list.
- * @priv: private data, passed to @cmp
- * @head: the list to sort
- * @cmp: the elements comparison function
- *
- * This function has been implemented by Mark J Roberts <mjr@znex.org>. It
- * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted
- * in ascending order.
- *
- * The comparison function @cmp is supposed to return a negative value if @a is
- * than @b, and a positive value if @a is greater than @b. If @a and @b are
- * equivalent, then it does not matter what this function returns.
- */
-static void list_sort(void *priv, struct list_head *head,
- int (*cmp)(void *priv, struct list_head *a,
- struct list_head *b))
-{
- struct list_head *p, *q, *e, *list, *tail, *oldhead;
- int insize, nmerges, psize, qsize, i;
-
- if (list_empty(head))
- return;
-
- list = head->next;
- list_del(head);
- insize = 1;
- for (;;) {
- p = oldhead = list;
- list = tail = NULL;
- nmerges = 0;
-
- while (p) {
- nmerges++;
- q = p;
- psize = 0;
- for (i = 0; i < insize; i++) {
- psize++;
- q = q->next == oldhead ? NULL : q->next;
- if (!q)
- break;
- }
-
- qsize = insize;
- while (psize > 0 || (qsize > 0 && q)) {
- if (!psize) {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- } else if (!qsize || !q) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else if (cmp(priv, p, q) <= 0) {
- e = p;
- p = p->next;
- psize--;
- if (p == oldhead)
- p = NULL;
- } else {
- e = q;
- q = q->next;
- qsize--;
- if (q == oldhead)
- q = NULL;
- }
- if (tail)
- tail->next = e;
- else
- list = e;
- e->prev = tail;
- tail = e;
- }
- p = q;
- }
-
- tail->next = list;
- list->prev = tail;
-
- if (nmerges <= 1)
- break;
-
- insize *= 2;
- }
-
- head->next = list;
- head->prev = list->prev;
- list->prev->next = head;
- list->prev = head;
-}
-
-/**
* data_nodes_cmp - compare 2 data nodes.
* @priv: UBIFS file-system description object
* @a: first data node
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 2512125..883ca5a 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -251,8 +251,9 @@
if (mode != inode->i_mode) {
struct iattr iattr;
- iattr.ia_valid = ATTR_MODE;
+ iattr.ia_valid = ATTR_MODE | ATTR_CTIME;
iattr.ia_mode = mode;
+ iattr.ia_ctime = current_fs_time(inode->i_sb);
error = -xfs_setattr(XFS_I(inode), &iattr, XFS_ATTR_NOACL);
}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 09783cc..77414db 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -954,16 +954,14 @@
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM));
/*
- * If we have nothing to flush with this inode then complete the
- * teardown now, otherwise delay the flush operation.
+ * We always use background reclaim here because even if the
+ * inode is clean, it still may be under IO and hence we have
+ * to take the flush lock. The background reclaim path handles
+ * this more efficiently than we can here, so simply let background
+ * reclaim tear down all inodes.
*/
- if (!xfs_inode_clean(ip)) {
- xfs_inode_set_reclaim_tag(ip);
- return;
- }
-
out_reclaim:
- xfs_ireclaim(ip);
+ xfs_inode_set_reclaim_tag(ip);
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 6fed97a..1f5e4bb 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -65,7 +65,6 @@
* as the tree is sparse and a gang lookup walks to find
* the number of objects requested.
*/
- read_lock(&pag->pag_ici_lock);
if (tag == XFS_ICI_NO_TAG) {
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
(void **)&ip, *first_index, 1);
@@ -74,7 +73,7 @@
(void **)&ip, *first_index, 1, tag);
}
if (!nr_found)
- goto unlock;
+ return NULL;
/*
* Update the index for the next lookup. Catch overflows
@@ -84,13 +83,8 @@
*/
*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
- goto unlock;
-
+ return NULL;
return ip;
-
-unlock:
- read_unlock(&pag->pag_ici_lock);
- return NULL;
}
STATIC int
@@ -100,7 +94,8 @@
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
struct xfs_perag *pag = &mp->m_perag[ag];
uint32_t first_index;
@@ -114,10 +109,20 @@
int error = 0;
xfs_inode_t *ip;
+ if (exclusive)
+ write_lock(&pag->pag_ici_lock);
+ else
+ read_lock(&pag->pag_ici_lock);
ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
- if (!ip)
+ if (!ip) {
+ if (exclusive)
+ write_unlock(&pag->pag_ici_lock);
+ else
+ read_unlock(&pag->pag_ici_lock);
break;
+ }
+ /* execute releases pag->pag_ici_lock */
error = execute(ip, pag, flags);
if (error == EAGAIN) {
skipped++;
@@ -125,9 +130,8 @@
}
if (error)
last_error = error;
- /*
- * bail out if the filesystem is corrupted.
- */
+
+ /* bail out if the filesystem is corrupted. */
if (error == EFSCORRUPTED)
break;
@@ -148,7 +152,8 @@
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
int error = 0;
int last_error = 0;
@@ -157,7 +162,8 @@
for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
if (!mp->m_perag[ag].pag_ici_init)
continue;
- error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+ error = xfs_inode_ag_walk(mp, ag, execute, flags, tag,
+ exclusive);
if (error) {
last_error = error;
if (error == EFSCORRUPTED)
@@ -174,30 +180,31 @@
struct xfs_perag *pag)
{
struct inode *inode = VFS_I(ip);
+ int error = EFSCORRUPTED;
/* nothing to sync during shutdown */
- if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- read_unlock(&pag->pag_ici_lock);
- return EFSCORRUPTED;
- }
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ goto out_unlock;
- /*
- * If we can't get a reference on the inode, it must be in reclaim.
- * Leave it for the reclaim code to flush. Also avoid inodes that
- * haven't been fully initialised.
- */
- if (!igrab(inode)) {
- read_unlock(&pag->pag_ici_lock);
- return ENOENT;
- }
- read_unlock(&pag->pag_ici_lock);
+ /* avoid new or reclaimable inodes. Leave for reclaim code to flush */
+ error = ENOENT;
+ if (xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM))
+ goto out_unlock;
- if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+ /* If we can't grab the inode, it must on it's way to reclaim. */
+ if (!igrab(inode))
+ goto out_unlock;
+
+ if (is_bad_inode(inode)) {
IRELE(ip);
- return ENOENT;
+ goto out_unlock;
}
- return 0;
+ /* inode is valid */
+ error = 0;
+out_unlock:
+ read_unlock(&pag->pag_ici_lock);
+ return error;
}
STATIC int
@@ -282,7 +289,7 @@
ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
if (error)
return XFS_ERROR(error);
@@ -304,7 +311,7 @@
ASSERT((flags & ~SYNC_WAIT) == 0);
return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
}
STATIC int
@@ -664,60 +671,6 @@
kthread_stop(mp->m_sync_task);
}
-STATIC int
-xfs_reclaim_inode(
- xfs_inode_t *ip,
- int sync_mode)
-{
- xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-
- /* The hash lock here protects a thread in xfs_iget_core from
- * racing with us on linking the inode back with a vnode.
- * Once we have the XFS_IRECLAIM flag set it will not touch
- * us.
- */
- write_lock(&pag->pag_ici_lock);
- spin_lock(&ip->i_flags_lock);
- if (__xfs_iflags_test(ip, XFS_IRECLAIM) ||
- !__xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- return -EAGAIN;
- }
- __xfs_iflags_set(ip, XFS_IRECLAIM);
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- xfs_put_perag(ip->i_mount, pag);
-
- /*
- * If the inode is still dirty, then flush it out. If the inode
- * is not in the AIL, then it will be OK to flush it delwri as
- * long as xfs_iflush() does not keep any references to the inode.
- * We leave that decision up to xfs_iflush() since it has the
- * knowledge of whether it's OK to simply do a delwri flush of
- * the inode or whether we need to wait until the inode is
- * pulled from the AIL.
- * We get the flush lock regardless, though, just to make sure
- * we don't free it while it is being flushed.
- */
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_iflock(ip);
-
- /*
- * In the case of a forced shutdown we rely on xfs_iflush() to
- * wait for the inode to be unpinned before returning an error.
- */
- if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
- /* synchronize with xfs_iflush_done */
- xfs_iflock(ip);
- xfs_ifunlock(ip);
- }
-
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_ireclaim(ip);
- return 0;
-}
-
void
__xfs_inode_set_reclaim_tag(
struct xfs_perag *pag,
@@ -760,19 +713,55 @@
}
STATIC int
-xfs_reclaim_inode_now(
+xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
- int flags)
+ int sync_mode)
{
- /* ignore if already under reclaim */
- if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
- read_unlock(&pag->pag_ici_lock);
+ /*
+ * The radix tree lock here protects a thread in xfs_iget from racing
+ * with us starting reclaim on the inode. Once we have the
+ * XFS_IRECLAIM flag set it will not touch us.
+ */
+ spin_lock(&ip->i_flags_lock);
+ ASSERT_ALWAYS(__xfs_iflags_test(ip, XFS_IRECLAIMABLE));
+ if (__xfs_iflags_test(ip, XFS_IRECLAIM)) {
+ /* ignore as it is already under reclaim */
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
return 0;
}
- read_unlock(&pag->pag_ici_lock);
+ __xfs_iflags_set(ip, XFS_IRECLAIM);
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
- return xfs_reclaim_inode(ip, flags);
+ /*
+ * If the inode is still dirty, then flush it out. If the inode
+ * is not in the AIL, then it will be OK to flush it delwri as
+ * long as xfs_iflush() does not keep any references to the inode.
+ * We leave that decision up to xfs_iflush() since it has the
+ * knowledge of whether it's OK to simply do a delwri flush of
+ * the inode or whether we need to wait until the inode is
+ * pulled from the AIL.
+ * We get the flush lock regardless, though, just to make sure
+ * we don't free it while it is being flushed.
+ */
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ xfs_iflock(ip);
+
+ /*
+ * In the case of a forced shutdown we rely on xfs_iflush() to
+ * wait for the inode to be unpinned before returning an error.
+ */
+ if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
+ /* synchronize with xfs_iflush_done */
+ xfs_iflock(ip);
+ xfs_ifunlock(ip);
+ }
+
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_ireclaim(ip);
+ return 0;
}
int
@@ -780,6 +769,6 @@
xfs_mount_t *mp,
int mode)
{
- return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
- XFS_ICI_RECLAIM_TAG);
+ return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
+ XFS_ICI_RECLAIM_TAG, 1);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index a500b4d..ea932b4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -54,6 +54,6 @@
int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
- int flags, int tag);
+ int flags, int tag, int write_lock);
#endif
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index c40834b..c22a608 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -33,51 +33,55 @@
struct xlog_ticket;
struct log;
-#define DEFINE_ATTR_LIST_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_attr_list_context *ctx), \
- TP_ARGS(ctx), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(u32, hashval) \
- __field(u32, blkno) \
- __field(u32, offset) \
- __field(void *, alist) \
- __field(int, bufsize) \
- __field(int, count) \
- __field(int, firstu) \
- __field(int, dupcnt) \
- __field(int, flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev; \
- __entry->ino = ctx->dp->i_ino; \
- __entry->hashval = ctx->cursor->hashval; \
- __entry->blkno = ctx->cursor->blkno; \
- __entry->offset = ctx->cursor->offset; \
- __entry->alist = ctx->alist; \
- __entry->bufsize = ctx->bufsize; \
- __entry->count = ctx->count; \
- __entry->firstu = ctx->firstu; \
- __entry->flags = ctx->flags; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u " \
- "alist 0x%p size %u count %u firstu %u flags %d %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->hashval, \
- __entry->blkno, \
- __entry->offset, \
- __entry->dupcnt, \
- __entry->alist, \
- __entry->bufsize, \
- __entry->count, \
- __entry->firstu, \
- __entry->flags, \
- __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS) \
- ) \
+DECLARE_EVENT_CLASS(xfs_attr_list_class,
+ TP_PROTO(struct xfs_attr_list_context *ctx),
+ TP_ARGS(ctx),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(u32, hashval)
+ __field(u32, blkno)
+ __field(u32, offset)
+ __field(void *, alist)
+ __field(int, bufsize)
+ __field(int, count)
+ __field(int, firstu)
+ __field(int, dupcnt)
+ __field(int, flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ctx->dp)->i_sb->s_dev;
+ __entry->ino = ctx->dp->i_ino;
+ __entry->hashval = ctx->cursor->hashval;
+ __entry->blkno = ctx->cursor->blkno;
+ __entry->offset = ctx->cursor->offset;
+ __entry->alist = ctx->alist;
+ __entry->bufsize = ctx->bufsize;
+ __entry->count = ctx->count;
+ __entry->firstu = ctx->firstu;
+ __entry->flags = ctx->flags;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx cursor h/b/o 0x%x/0x%x/%u dupcnt %u "
+ "alist 0x%p size %u count %u firstu %u flags %d %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->hashval,
+ __entry->blkno,
+ __entry->offset,
+ __entry->dupcnt,
+ __entry->alist,
+ __entry->bufsize,
+ __entry->count,
+ __entry->firstu,
+ __entry->flags,
+ __print_flags(__entry->flags, "|", XFS_ATTR_FLAGS)
+ )
)
+
+#define DEFINE_ATTR_LIST_EVENT(name) \
+DEFINE_EVENT(xfs_attr_list_class, name, \
+ TP_PROTO(struct xfs_attr_list_context *ctx), \
+ TP_ARGS(ctx))
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf);
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_sf_all);
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_leaf);
@@ -178,91 +182,99 @@
(char *)__entry->caller_ip)
);
-#define DEFINE_BMAP_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, \
- unsigned long caller_ip), \
- TP_ARGS(ip, idx, state, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(xfs_extnum_t, idx) \
- __field(xfs_fileoff_t, startoff) \
- __field(xfs_fsblock_t, startblock) \
- __field(xfs_filblks_t, blockcount) \
- __field(xfs_exntst_t, state) \
- __field(int, bmap_state) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ? \
- ip->i_afp : &ip->i_df; \
- struct xfs_bmbt_irec r; \
- \
- xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r); \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->idx = idx; \
- __entry->startoff = r.br_startoff; \
- __entry->startblock = r.br_startblock; \
- __entry->blockcount = r.br_blockcount; \
- __entry->state = r.br_state; \
- __entry->bmap_state = state; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx state %s idx %ld " \
- "offset %lld block %s count %lld flag %d caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS), \
- (long)__entry->idx, \
- __entry->startoff, \
- xfs_fmtfsblock(__entry->startblock), \
- __entry->blockcount, \
- __entry->state, \
- (char *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_bmap_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state,
+ unsigned long caller_ip),
+ TP_ARGS(ip, idx, state, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(xfs_extnum_t, idx)
+ __field(xfs_fileoff_t, startoff)
+ __field(xfs_fsblock_t, startblock)
+ __field(xfs_filblks_t, blockcount)
+ __field(xfs_exntst_t, state)
+ __field(int, bmap_state)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ struct xfs_ifork *ifp = (state & BMAP_ATTRFORK) ?
+ ip->i_afp : &ip->i_df;
+ struct xfs_bmbt_irec r;
+
+ xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx), &r);
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->idx = idx;
+ __entry->startoff = r.br_startoff;
+ __entry->startblock = r.br_startblock;
+ __entry->blockcount = r.br_blockcount;
+ __entry->state = r.br_state;
+ __entry->bmap_state = state;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx state %s idx %ld "
+ "offset %lld block %s count %lld flag %d caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->bmap_state, "|", XFS_BMAP_EXT_FLAGS),
+ (long)__entry->idx,
+ __entry->startoff,
+ xfs_fmtfsblock(__entry->startblock),
+ __entry->blockcount,
+ __entry->state,
+ (char *)__entry->caller_ip)
)
+#define DEFINE_BMAP_EVENT(name) \
+DEFINE_EVENT(xfs_bmap_class, name, \
+ TP_PROTO(struct xfs_inode *ip, xfs_extnum_t idx, int state, \
+ unsigned long caller_ip), \
+ TP_ARGS(ip, idx, state, caller_ip))
DEFINE_BMAP_EVENT(xfs_iext_remove);
DEFINE_BMAP_EVENT(xfs_bmap_pre_update);
DEFINE_BMAP_EVENT(xfs_bmap_post_update);
DEFINE_BMAP_EVENT(xfs_extlist);
-#define DEFINE_BUF_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \
- TP_ARGS(bp, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, bno) \
- __field(size_t, buffer_length) \
- __field(int, hold) \
- __field(int, pincount) \
- __field(unsigned, lockval) \
- __field(unsigned, flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = bp->b_target->bt_dev; \
- __entry->bno = bp->b_bn; \
- __entry->buffer_length = bp->b_buffer_length; \
- __entry->hold = atomic_read(&bp->b_hold); \
- __entry->pincount = atomic_read(&bp->b_pin_count); \
- __entry->lockval = xfs_buf_lock_value(bp); \
- __entry->flags = bp->b_flags; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->bno, \
- __entry->buffer_length, \
- __entry->hold, \
- __entry->pincount, \
- __entry->lockval, \
- __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \
- (void *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_buf_class,
+ TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip),
+ TP_ARGS(bp, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, bno)
+ __field(size_t, buffer_length)
+ __field(int, hold)
+ __field(int, pincount)
+ __field(unsigned, lockval)
+ __field(unsigned, flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = bp->b_target->bt_dev;
+ __entry->bno = bp->b_bn;
+ __entry->buffer_length = bp->b_buffer_length;
+ __entry->hold = atomic_read(&bp->b_hold);
+ __entry->pincount = atomic_read(&bp->b_pin_count);
+ __entry->lockval = xfs_buf_lock_value(bp);
+ __entry->flags = bp->b_flags;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->bno,
+ __entry->buffer_length,
+ __entry->hold,
+ __entry->pincount,
+ __entry->lockval,
+ __print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
+ (void *)__entry->caller_ip)
)
+
+#define DEFINE_BUF_EVENT(name) \
+DEFINE_EVENT(xfs_buf_class, name, \
+ TP_PROTO(struct xfs_buf *bp, unsigned long caller_ip), \
+ TP_ARGS(bp, caller_ip))
DEFINE_BUF_EVENT(xfs_buf_init);
DEFINE_BUF_EVENT(xfs_buf_free);
DEFINE_BUF_EVENT(xfs_buf_hold);
@@ -299,41 +311,45 @@
DEFINE_BUF_EVENT(xfs_inode_item_push);
/* pass flags explicitly */
-#define DEFINE_BUF_FLAGS_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \
- TP_ARGS(bp, flags, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, bno) \
- __field(size_t, buffer_length) \
- __field(int, hold) \
- __field(int, pincount) \
- __field(unsigned, lockval) \
- __field(unsigned, flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = bp->b_target->bt_dev; \
- __entry->bno = bp->b_bn; \
- __entry->buffer_length = bp->b_buffer_length; \
- __entry->flags = flags; \
- __entry->hold = atomic_read(&bp->b_hold); \
- __entry->pincount = atomic_read(&bp->b_pin_count); \
- __entry->lockval = xfs_buf_lock_value(bp); \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->bno, \
- __entry->buffer_length, \
- __entry->hold, \
- __entry->pincount, \
- __entry->lockval, \
- __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), \
- (void *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_buf_flags_class,
+ TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip),
+ TP_ARGS(bp, flags, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, bno)
+ __field(size_t, buffer_length)
+ __field(int, hold)
+ __field(int, pincount)
+ __field(unsigned, lockval)
+ __field(unsigned, flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = bp->b_target->bt_dev;
+ __entry->bno = bp->b_bn;
+ __entry->buffer_length = bp->b_buffer_length;
+ __entry->flags = flags;
+ __entry->hold = atomic_read(&bp->b_hold);
+ __entry->pincount = atomic_read(&bp->b_pin_count);
+ __entry->lockval = xfs_buf_lock_value(bp);
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->bno,
+ __entry->buffer_length,
+ __entry->hold,
+ __entry->pincount,
+ __entry->lockval,
+ __print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
+ (void *)__entry->caller_ip)
)
+
+#define DEFINE_BUF_FLAGS_EVENT(name) \
+DEFINE_EVENT(xfs_buf_flags_class, name, \
+ TP_PROTO(struct xfs_buf *bp, unsigned flags, unsigned long caller_ip), \
+ TP_ARGS(bp, flags, caller_ip))
DEFINE_BUF_FLAGS_EVENT(xfs_buf_find);
DEFINE_BUF_FLAGS_EVENT(xfs_buf_get);
DEFINE_BUF_FLAGS_EVENT(xfs_buf_read);
@@ -376,55 +392,58 @@
(void *)__entry->caller_ip)
);
-#define DEFINE_BUF_ITEM_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_buf_log_item *bip), \
- TP_ARGS(bip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_daddr_t, buf_bno) \
- __field(size_t, buf_len) \
- __field(int, buf_hold) \
- __field(int, buf_pincount) \
- __field(int, buf_lockval) \
- __field(unsigned, buf_flags) \
- __field(unsigned, bli_recur) \
- __field(int, bli_refcount) \
- __field(unsigned, bli_flags) \
- __field(void *, li_desc) \
- __field(unsigned, li_flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = bip->bli_buf->b_target->bt_dev; \
- __entry->bli_flags = bip->bli_flags; \
- __entry->bli_recur = bip->bli_recur; \
- __entry->bli_refcount = atomic_read(&bip->bli_refcount); \
- __entry->buf_bno = bip->bli_buf->b_bn; \
- __entry->buf_len = bip->bli_buf->b_buffer_length; \
- __entry->buf_flags = bip->bli_buf->b_flags; \
- __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold); \
- __entry->buf_pincount = \
- atomic_read(&bip->bli_buf->b_pin_count); \
- __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf); \
- __entry->li_desc = bip->bli_item.li_desc; \
- __entry->li_flags = bip->bli_item.li_flags; \
- ), \
- TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d " \
- "lock %d flags %s recur %d refcount %d bliflags %s " \
- "lidesc 0x%p liflags %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- (unsigned long long)__entry->buf_bno, \
- __entry->buf_len, \
- __entry->buf_hold, \
- __entry->buf_pincount, \
- __entry->buf_lockval, \
- __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS), \
- __entry->bli_recur, \
- __entry->bli_refcount, \
- __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS), \
- __entry->li_desc, \
- __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_buf_item_class,
+ TP_PROTO(struct xfs_buf_log_item *bip),
+ TP_ARGS(bip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_daddr_t, buf_bno)
+ __field(size_t, buf_len)
+ __field(int, buf_hold)
+ __field(int, buf_pincount)
+ __field(int, buf_lockval)
+ __field(unsigned, buf_flags)
+ __field(unsigned, bli_recur)
+ __field(int, bli_refcount)
+ __field(unsigned, bli_flags)
+ __field(void *, li_desc)
+ __field(unsigned, li_flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = bip->bli_buf->b_target->bt_dev;
+ __entry->bli_flags = bip->bli_flags;
+ __entry->bli_recur = bip->bli_recur;
+ __entry->bli_refcount = atomic_read(&bip->bli_refcount);
+ __entry->buf_bno = bip->bli_buf->b_bn;
+ __entry->buf_len = bip->bli_buf->b_buffer_length;
+ __entry->buf_flags = bip->bli_buf->b_flags;
+ __entry->buf_hold = atomic_read(&bip->bli_buf->b_hold);
+ __entry->buf_pincount = atomic_read(&bip->bli_buf->b_pin_count);
+ __entry->buf_lockval = xfs_buf_lock_value(bip->bli_buf);
+ __entry->li_desc = bip->bli_item.li_desc;
+ __entry->li_flags = bip->bli_item.li_flags;
+ ),
+ TP_printk("dev %d:%d bno 0x%llx len 0x%zx hold %d pincount %d "
+ "lock %d flags %s recur %d refcount %d bliflags %s "
+ "lidesc 0x%p liflags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->buf_bno,
+ __entry->buf_len,
+ __entry->buf_hold,
+ __entry->buf_pincount,
+ __entry->buf_lockval,
+ __print_flags(__entry->buf_flags, "|", XFS_BUF_FLAGS),
+ __entry->bli_recur,
+ __entry->bli_refcount,
+ __print_flags(__entry->bli_flags, "|", XFS_BLI_FLAGS),
+ __entry->li_desc,
+ __print_flags(__entry->li_flags, "|", XFS_LI_FLAGS))
)
+
+#define DEFINE_BUF_ITEM_EVENT(name) \
+DEFINE_EVENT(xfs_buf_item_class, name, \
+ TP_PROTO(struct xfs_buf_log_item *bip), \
+ TP_ARGS(bip))
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size);
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_size_stale);
DEFINE_BUF_ITEM_EVENT(xfs_buf_item_format);
@@ -450,78 +469,90 @@
DEFINE_BUF_ITEM_EVENT(xfs_trans_bhold_release);
DEFINE_BUF_ITEM_EVENT(xfs_trans_binval);
-#define DEFINE_LOCK_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, \
- unsigned long caller_ip), \
- TP_ARGS(ip, lock_flags, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, lock_flags) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->lock_flags = lock_flags; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS), \
- (void *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_lock_class,
+ TP_PROTO(struct xfs_inode *ip, unsigned lock_flags,
+ unsigned long caller_ip),
+ TP_ARGS(ip, lock_flags, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, lock_flags)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->lock_flags = lock_flags;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx flags %s caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->lock_flags, "|", XFS_LOCK_FLAGS),
+ (void *)__entry->caller_ip)
)
+#define DEFINE_LOCK_EVENT(name) \
+DEFINE_EVENT(xfs_lock_class, name, \
+ TP_PROTO(struct xfs_inode *ip, unsigned lock_flags, \
+ unsigned long caller_ip), \
+ TP_ARGS(ip, lock_flags, caller_ip))
DEFINE_LOCK_EVENT(xfs_ilock);
DEFINE_LOCK_EVENT(xfs_ilock_nowait);
DEFINE_LOCK_EVENT(xfs_ilock_demote);
DEFINE_LOCK_EVENT(xfs_iunlock);
-#define DEFINE_IGET_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip), \
- TP_ARGS(ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino) \
+DECLARE_EVENT_CLASS(xfs_iget_class,
+ TP_PROTO(struct xfs_inode *ip),
+ TP_ARGS(ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino)
)
+
+#define DEFINE_IGET_EVENT(name) \
+DEFINE_EVENT(xfs_iget_class, name, \
+ TP_PROTO(struct xfs_inode *ip), \
+ TP_ARGS(ip))
DEFINE_IGET_EVENT(xfs_iget_skip);
DEFINE_IGET_EVENT(xfs_iget_reclaim);
DEFINE_IGET_EVENT(xfs_iget_found);
DEFINE_IGET_EVENT(xfs_iget_alloc);
-#define DEFINE_INODE_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \
- TP_ARGS(ip, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, count) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->count = atomic_read(&VFS_I(ip)->i_count); \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx count %d caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->count, \
- (char *)__entry->caller_ip) \
+DECLARE_EVENT_CLASS(xfs_inode_class,
+ TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip),
+ TP_ARGS(ip, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, count)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->count = atomic_read(&VFS_I(ip)->i_count);
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx count %d caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->count,
+ (char *)__entry->caller_ip)
)
+
+#define DEFINE_INODE_EVENT(name) \
+DEFINE_EVENT(xfs_inode_class, name, \
+ TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \
+ TP_ARGS(ip, caller_ip))
DEFINE_INODE_EVENT(xfs_ihold);
DEFINE_INODE_EVENT(xfs_irele);
/* the old xfs_itrace_entry tracer - to be replaced by s.th. in the VFS */
@@ -529,55 +560,59 @@
#define xfs_itrace_entry(ip) \
trace_xfs_inode(ip, _THIS_IP_)
-#define DEFINE_DQUOT_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_dquot *dqp), \
- TP_ARGS(dqp), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(__be32, id) \
- __field(unsigned, flags) \
- __field(unsigned, nrefs) \
- __field(unsigned long long, res_bcount) \
- __field(unsigned long long, bcount) \
- __field(unsigned long long, icount) \
- __field(unsigned long long, blk_hardlimit) \
- __field(unsigned long long, blk_softlimit) \
- __field(unsigned long long, ino_hardlimit) \
- __field(unsigned long long, ino_softlimit) \
+DECLARE_EVENT_CLASS(xfs_dquot_class,
+ TP_PROTO(struct xfs_dquot *dqp),
+ TP_ARGS(dqp),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(__be32, id)
+ __field(unsigned, flags)
+ __field(unsigned, nrefs)
+ __field(unsigned long long, res_bcount)
+ __field(unsigned long long, bcount)
+ __field(unsigned long long, icount)
+ __field(unsigned long long, blk_hardlimit)
+ __field(unsigned long long, blk_softlimit)
+ __field(unsigned long long, ino_hardlimit)
+ __field(unsigned long long, ino_softlimit)
), \
- TP_fast_assign( \
- __entry->dev = dqp->q_mount->m_super->s_dev; \
- __entry->id = dqp->q_core.d_id; \
- __entry->flags = dqp->dq_flags; \
- __entry->nrefs = dqp->q_nrefs; \
- __entry->res_bcount = dqp->q_res_bcount; \
- __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount); \
- __entry->icount = be64_to_cpu(dqp->q_core.d_icount); \
- __entry->blk_hardlimit = \
- be64_to_cpu(dqp->q_core.d_blk_hardlimit); \
- __entry->blk_softlimit = \
- be64_to_cpu(dqp->q_core.d_blk_softlimit); \
- __entry->ino_hardlimit = \
- be64_to_cpu(dqp->q_core.d_ino_hardlimit); \
- __entry->ino_softlimit = \
- be64_to_cpu(dqp->q_core.d_ino_softlimit); \
- ), \
- TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx " \
- "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] " \
- "icnt 0x%llx [hard 0x%llx | soft 0x%llx]", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- be32_to_cpu(__entry->id), \
- __print_flags(__entry->flags, "|", XFS_DQ_FLAGS), \
- __entry->nrefs, \
- __entry->res_bcount, \
- __entry->bcount, \
- __entry->blk_hardlimit, \
- __entry->blk_softlimit, \
- __entry->icount, \
- __entry->ino_hardlimit, \
- __entry->ino_softlimit) \
+ TP_fast_assign(
+ __entry->dev = dqp->q_mount->m_super->s_dev;
+ __entry->id = dqp->q_core.d_id;
+ __entry->flags = dqp->dq_flags;
+ __entry->nrefs = dqp->q_nrefs;
+ __entry->res_bcount = dqp->q_res_bcount;
+ __entry->bcount = be64_to_cpu(dqp->q_core.d_bcount);
+ __entry->icount = be64_to_cpu(dqp->q_core.d_icount);
+ __entry->blk_hardlimit =
+ be64_to_cpu(dqp->q_core.d_blk_hardlimit);
+ __entry->blk_softlimit =
+ be64_to_cpu(dqp->q_core.d_blk_softlimit);
+ __entry->ino_hardlimit =
+ be64_to_cpu(dqp->q_core.d_ino_hardlimit);
+ __entry->ino_softlimit =
+ be64_to_cpu(dqp->q_core.d_ino_softlimit);
+ ),
+ TP_printk("dev %d:%d id 0x%x flags %s nrefs %u res_bc 0x%llx "
+ "bcnt 0x%llx [hard 0x%llx | soft 0x%llx] "
+ "icnt 0x%llx [hard 0x%llx | soft 0x%llx]",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ be32_to_cpu(__entry->id),
+ __print_flags(__entry->flags, "|", XFS_DQ_FLAGS),
+ __entry->nrefs,
+ __entry->res_bcount,
+ __entry->bcount,
+ __entry->blk_hardlimit,
+ __entry->blk_softlimit,
+ __entry->icount,
+ __entry->ino_hardlimit,
+ __entry->ino_softlimit)
)
+
+#define DEFINE_DQUOT_EVENT(name) \
+DEFINE_EVENT(xfs_dquot_class, name, \
+ TP_PROTO(struct xfs_dquot *dqp), \
+ TP_ARGS(dqp))
DEFINE_DQUOT_EVENT(xfs_dqadjust);
DEFINE_DQUOT_EVENT(xfs_dqshake_dirty);
DEFINE_DQUOT_EVENT(xfs_dqshake_unlink);
@@ -610,72 +645,75 @@
DEFINE_IGET_EVENT(xfs_dquot_dqalloc);
DEFINE_IGET_EVENT(xfs_dquot_dqdetach);
-
-#define DEFINE_LOGGRANT_EVENT(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
- TP_ARGS(log, tic), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(unsigned, trans_type) \
- __field(char, ocnt) \
- __field(char, cnt) \
- __field(int, curr_res) \
- __field(int, unit_res) \
- __field(unsigned int, flags) \
- __field(void *, reserve_headq) \
- __field(void *, write_headq) \
- __field(int, grant_reserve_cycle) \
- __field(int, grant_reserve_bytes) \
- __field(int, grant_write_cycle) \
- __field(int, grant_write_bytes) \
- __field(int, curr_cycle) \
- __field(int, curr_block) \
- __field(xfs_lsn_t, tail_lsn) \
- ), \
- TP_fast_assign( \
- __entry->dev = log->l_mp->m_super->s_dev; \
- __entry->trans_type = tic->t_trans_type; \
- __entry->ocnt = tic->t_ocnt; \
- __entry->cnt = tic->t_cnt; \
- __entry->curr_res = tic->t_curr_res; \
- __entry->unit_res = tic->t_unit_res; \
- __entry->flags = tic->t_flags; \
- __entry->reserve_headq = log->l_reserve_headq; \
- __entry->write_headq = log->l_write_headq; \
- __entry->grant_reserve_cycle = log->l_grant_reserve_cycle; \
- __entry->grant_reserve_bytes = log->l_grant_reserve_bytes; \
- __entry->grant_write_cycle = log->l_grant_write_cycle; \
- __entry->grant_write_bytes = log->l_grant_write_bytes; \
- __entry->curr_cycle = log->l_curr_cycle; \
- __entry->curr_block = log->l_curr_block; \
- __entry->tail_lsn = log->l_tail_lsn; \
- ), \
- TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u " \
- "t_unit_res %u t_flags %s reserve_headq 0x%p " \
- "write_headq 0x%p grant_reserve_cycle %d " \
- "grant_reserve_bytes %d grant_write_cycle %d " \
- "grant_write_bytes %d curr_cycle %d curr_block %d " \
- "tail_cycle %d tail_block %d", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES), \
- __entry->ocnt, \
- __entry->cnt, \
- __entry->curr_res, \
- __entry->unit_res, \
- __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS), \
- __entry->reserve_headq, \
- __entry->write_headq, \
- __entry->grant_reserve_cycle, \
- __entry->grant_reserve_bytes, \
- __entry->grant_write_cycle, \
- __entry->grant_write_bytes, \
- __entry->curr_cycle, \
- __entry->curr_block, \
- CYCLE_LSN(__entry->tail_lsn), \
- BLOCK_LSN(__entry->tail_lsn) \
- ) \
+DECLARE_EVENT_CLASS(xfs_loggrant_class,
+ TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_ARGS(log, tic),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(unsigned, trans_type)
+ __field(char, ocnt)
+ __field(char, cnt)
+ __field(int, curr_res)
+ __field(int, unit_res)
+ __field(unsigned int, flags)
+ __field(void *, reserve_headq)
+ __field(void *, write_headq)
+ __field(int, grant_reserve_cycle)
+ __field(int, grant_reserve_bytes)
+ __field(int, grant_write_cycle)
+ __field(int, grant_write_bytes)
+ __field(int, curr_cycle)
+ __field(int, curr_block)
+ __field(xfs_lsn_t, tail_lsn)
+ ),
+ TP_fast_assign(
+ __entry->dev = log->l_mp->m_super->s_dev;
+ __entry->trans_type = tic->t_trans_type;
+ __entry->ocnt = tic->t_ocnt;
+ __entry->cnt = tic->t_cnt;
+ __entry->curr_res = tic->t_curr_res;
+ __entry->unit_res = tic->t_unit_res;
+ __entry->flags = tic->t_flags;
+ __entry->reserve_headq = log->l_reserve_headq;
+ __entry->write_headq = log->l_write_headq;
+ __entry->grant_reserve_cycle = log->l_grant_reserve_cycle;
+ __entry->grant_reserve_bytes = log->l_grant_reserve_bytes;
+ __entry->grant_write_cycle = log->l_grant_write_cycle;
+ __entry->grant_write_bytes = log->l_grant_write_bytes;
+ __entry->curr_cycle = log->l_curr_cycle;
+ __entry->curr_block = log->l_curr_block;
+ __entry->tail_lsn = log->l_tail_lsn;
+ ),
+ TP_printk("dev %d:%d type %s t_ocnt %u t_cnt %u t_curr_res %u "
+ "t_unit_res %u t_flags %s reserve_headq 0x%p "
+ "write_headq 0x%p grant_reserve_cycle %d "
+ "grant_reserve_bytes %d grant_write_cycle %d "
+ "grant_write_bytes %d curr_cycle %d curr_block %d "
+ "tail_cycle %d tail_block %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __print_symbolic(__entry->trans_type, XFS_TRANS_TYPES),
+ __entry->ocnt,
+ __entry->cnt,
+ __entry->curr_res,
+ __entry->unit_res,
+ __print_flags(__entry->flags, "|", XLOG_TIC_FLAGS),
+ __entry->reserve_headq,
+ __entry->write_headq,
+ __entry->grant_reserve_cycle,
+ __entry->grant_reserve_bytes,
+ __entry->grant_write_cycle,
+ __entry->grant_write_bytes,
+ __entry->curr_cycle,
+ __entry->curr_block,
+ CYCLE_LSN(__entry->tail_lsn),
+ BLOCK_LSN(__entry->tail_lsn)
+ )
)
+
+#define DEFINE_LOGGRANT_EVENT(name) \
+DEFINE_EVENT(xfs_loggrant_class, name, \
+ TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_LOGGRANT_EVENT(xfs_log_reserve);
@@ -815,7 +853,7 @@
), \
TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
"offset 0x%llx count %zd flags %s " \
- "startoff 0x%llx startblock 0x%llx blockcount 0x%llx", \
+ "startoff 0x%llx startblock %s blockcount 0x%llx", \
MAJOR(__entry->dev), MINOR(__entry->dev), \
__entry->ino, \
__entry->size, \
@@ -824,7 +862,7 @@
__entry->count, \
__print_flags(__entry->flags, "|", BMAPI_FLAGS), \
__entry->startoff, \
- __entry->startblock, \
+ xfs_fmtfsblock(__entry->startblock), \
__entry->blockcount) \
)
DEFINE_IOMAP_EVENT(xfs_iomap_enter);
@@ -897,28 +935,32 @@
__entry->toss_finish)
);
-#define DEFINE_ITRUNC_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), \
- TP_ARGS(ip, new_size), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(xfs_fsize_t, size) \
- __field(xfs_fsize_t, new_size) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->size = ip->i_d.di_size; \
- __entry->new_size = new_size; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->size, \
- __entry->new_size) \
+DECLARE_EVENT_CLASS(xfs_itrunc_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size),
+ TP_ARGS(ip, new_size),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(xfs_fsize_t, size)
+ __field(xfs_fsize_t, new_size)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->size = ip->i_d.di_size;
+ __entry->new_size = new_size;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->size,
+ __entry->new_size)
)
+
+#define DEFINE_ITRUNC_EVENT(name) \
+DEFINE_EVENT(xfs_itrunc_class, name, \
+ TP_PROTO(struct xfs_inode *ip, xfs_fsize_t new_size), \
+ TP_ARGS(ip, new_size))
DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_start);
DEFINE_ITRUNC_EVENT(xfs_itruncate_finish_end);
@@ -1037,28 +1079,28 @@
TRACE_EVENT(xfs_alloc_busysearch,
TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, xfs_agblock_t agbno,
- xfs_extlen_t len, int found),
- TP_ARGS(mp, agno, agbno, len, found),
+ xfs_extlen_t len, xfs_lsn_t lsn),
+ TP_ARGS(mp, agno, agbno, len, lsn),
TP_STRUCT__entry(
__field(dev_t, dev)
__field(xfs_agnumber_t, agno)
__field(xfs_agblock_t, agbno)
__field(xfs_extlen_t, len)
- __field(int, found)
+ __field(xfs_lsn_t, lsn)
),
TP_fast_assign(
__entry->dev = mp->m_super->s_dev;
__entry->agno = agno;
__entry->agbno = agbno;
__entry->len = len;
- __entry->found = found;
+ __entry->lsn = lsn;
),
- TP_printk("dev %d:%d agno %u agbno %u len %u %s",
+ TP_printk("dev %d:%d agno %u agbno %u len %u force lsn 0x%llx",
MAJOR(__entry->dev), MINOR(__entry->dev),
__entry->agno,
__entry->agbno,
__entry->len,
- __print_symbolic(__entry->found, XFS_BUSY_STATES))
+ __entry->lsn)
);
TRACE_EVENT(xfs_agf,
@@ -1152,77 +1194,80 @@
);
-#define DEFINE_ALLOC_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_alloc_arg *args), \
- TP_ARGS(args), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_agnumber_t, agno) \
- __field(xfs_agblock_t, agbno) \
- __field(xfs_extlen_t, minlen) \
- __field(xfs_extlen_t, maxlen) \
- __field(xfs_extlen_t, mod) \
- __field(xfs_extlen_t, prod) \
- __field(xfs_extlen_t, minleft) \
- __field(xfs_extlen_t, total) \
- __field(xfs_extlen_t, alignment) \
- __field(xfs_extlen_t, minalignslop) \
- __field(xfs_extlen_t, len) \
- __field(short, type) \
- __field(short, otype) \
- __field(char, wasdel) \
- __field(char, wasfromfl) \
- __field(char, isfl) \
- __field(char, userdata) \
- __field(xfs_fsblock_t, firstblock) \
- ), \
- TP_fast_assign( \
- __entry->dev = args->mp->m_super->s_dev; \
- __entry->agno = args->agno; \
- __entry->agbno = args->agbno; \
- __entry->minlen = args->minlen; \
- __entry->maxlen = args->maxlen; \
- __entry->mod = args->mod; \
- __entry->prod = args->prod; \
- __entry->minleft = args->minleft; \
- __entry->total = args->total; \
- __entry->alignment = args->alignment; \
- __entry->minalignslop = args->minalignslop; \
- __entry->len = args->len; \
- __entry->type = args->type; \
- __entry->otype = args->otype; \
- __entry->wasdel = args->wasdel; \
- __entry->wasfromfl = args->wasfromfl; \
- __entry->isfl = args->isfl; \
- __entry->userdata = args->userdata; \
- __entry->firstblock = args->firstblock; \
- ), \
- TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u " \
- "prod %u minleft %u total %u alignment %u minalignslop %u " \
- "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d " \
- "userdata %d firstblock 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->agno, \
- __entry->agbno, \
- __entry->minlen, \
- __entry->maxlen, \
- __entry->mod, \
- __entry->prod, \
- __entry->minleft, \
- __entry->total, \
- __entry->alignment, \
- __entry->minalignslop, \
- __entry->len, \
- __print_symbolic(__entry->type, XFS_ALLOC_TYPES), \
- __print_symbolic(__entry->otype, XFS_ALLOC_TYPES), \
- __entry->wasdel, \
- __entry->wasfromfl, \
- __entry->isfl, \
- __entry->userdata, \
- __entry->firstblock) \
+DECLARE_EVENT_CLASS(xfs_alloc_class,
+ TP_PROTO(struct xfs_alloc_arg *args),
+ TP_ARGS(args),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_agnumber_t, agno)
+ __field(xfs_agblock_t, agbno)
+ __field(xfs_extlen_t, minlen)
+ __field(xfs_extlen_t, maxlen)
+ __field(xfs_extlen_t, mod)
+ __field(xfs_extlen_t, prod)
+ __field(xfs_extlen_t, minleft)
+ __field(xfs_extlen_t, total)
+ __field(xfs_extlen_t, alignment)
+ __field(xfs_extlen_t, minalignslop)
+ __field(xfs_extlen_t, len)
+ __field(short, type)
+ __field(short, otype)
+ __field(char, wasdel)
+ __field(char, wasfromfl)
+ __field(char, isfl)
+ __field(char, userdata)
+ __field(xfs_fsblock_t, firstblock)
+ ),
+ TP_fast_assign(
+ __entry->dev = args->mp->m_super->s_dev;
+ __entry->agno = args->agno;
+ __entry->agbno = args->agbno;
+ __entry->minlen = args->minlen;
+ __entry->maxlen = args->maxlen;
+ __entry->mod = args->mod;
+ __entry->prod = args->prod;
+ __entry->minleft = args->minleft;
+ __entry->total = args->total;
+ __entry->alignment = args->alignment;
+ __entry->minalignslop = args->minalignslop;
+ __entry->len = args->len;
+ __entry->type = args->type;
+ __entry->otype = args->otype;
+ __entry->wasdel = args->wasdel;
+ __entry->wasfromfl = args->wasfromfl;
+ __entry->isfl = args->isfl;
+ __entry->userdata = args->userdata;
+ __entry->firstblock = args->firstblock;
+ ),
+ TP_printk("dev %d:%d agno %u agbno %u minlen %u maxlen %u mod %u "
+ "prod %u minleft %u total %u alignment %u minalignslop %u "
+ "len %u type %s otype %s wasdel %d wasfromfl %d isfl %d "
+ "userdata %d firstblock 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->agno,
+ __entry->agbno,
+ __entry->minlen,
+ __entry->maxlen,
+ __entry->mod,
+ __entry->prod,
+ __entry->minleft,
+ __entry->total,
+ __entry->alignment,
+ __entry->minalignslop,
+ __entry->len,
+ __print_symbolic(__entry->type, XFS_ALLOC_TYPES),
+ __print_symbolic(__entry->otype, XFS_ALLOC_TYPES),
+ __entry->wasdel,
+ __entry->wasfromfl,
+ __entry->isfl,
+ __entry->userdata,
+ __entry->firstblock)
)
+#define DEFINE_ALLOC_EVENT(name) \
+DEFINE_EVENT(xfs_alloc_class, name, \
+ TP_PROTO(struct xfs_alloc_arg *args), \
+ TP_ARGS(args))
DEFINE_ALLOC_EVENT(xfs_alloc_exact_done);
DEFINE_ALLOC_EVENT(xfs_alloc_exact_error);
DEFINE_ALLOC_EVENT(xfs_alloc_near_nominleft);
@@ -1245,92 +1290,100 @@
DEFINE_ALLOC_EVENT(xfs_alloc_vextent_loopfailed);
DEFINE_ALLOC_EVENT(xfs_alloc_vextent_allfailed);
-#define DEFINE_DIR2_TRACE(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_da_args *args), \
- TP_ARGS(args), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __dynamic_array(char, name, args->namelen) \
- __field(int, namelen) \
- __field(xfs_dahash_t, hashval) \
- __field(xfs_ino_t, inumber) \
- __field(int, op_flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \
- __entry->ino = args->dp->i_ino; \
- if (args->namelen) \
- memcpy(__get_str(name), args->name, args->namelen); \
- __entry->namelen = args->namelen; \
- __entry->hashval = args->hashval; \
- __entry->inumber = args->inumber; \
- __entry->op_flags = args->op_flags; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x " \
- "inumber 0x%llx op_flags %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->namelen, \
- __entry->namelen ? __get_str(name) : NULL, \
- __entry->namelen, \
- __entry->hashval, \
- __entry->inumber, \
- __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_dir2_class,
+ TP_PROTO(struct xfs_da_args *args),
+ TP_ARGS(args),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __dynamic_array(char, name, args->namelen)
+ __field(int, namelen)
+ __field(xfs_dahash_t, hashval)
+ __field(xfs_ino_t, inumber)
+ __field(int, op_flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(args->dp)->i_sb->s_dev;
+ __entry->ino = args->dp->i_ino;
+ if (args->namelen)
+ memcpy(__get_str(name), args->name, args->namelen);
+ __entry->namelen = args->namelen;
+ __entry->hashval = args->hashval;
+ __entry->inumber = args->inumber;
+ __entry->op_flags = args->op_flags;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx name %.*s namelen %d hashval 0x%x "
+ "inumber 0x%llx op_flags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->namelen,
+ __entry->namelen ? __get_str(name) : NULL,
+ __entry->namelen,
+ __entry->hashval,
+ __entry->inumber,
+ __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS))
)
-DEFINE_DIR2_TRACE(xfs_dir2_sf_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_create);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_toino4);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_toino8);
-DEFINE_DIR2_TRACE(xfs_dir2_sf_to_block);
-DEFINE_DIR2_TRACE(xfs_dir2_block_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_block_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_block_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_block_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_block_to_sf);
-DEFINE_DIR2_TRACE(xfs_dir2_block_to_leaf);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_block);
-DEFINE_DIR2_TRACE(xfs_dir2_leaf_to_node);
-DEFINE_DIR2_TRACE(xfs_dir2_node_addname);
-DEFINE_DIR2_TRACE(xfs_dir2_node_lookup);
-DEFINE_DIR2_TRACE(xfs_dir2_node_replace);
-DEFINE_DIR2_TRACE(xfs_dir2_node_removename);
-DEFINE_DIR2_TRACE(xfs_dir2_node_to_leaf);
-#define DEFINE_DIR2_SPACE_TRACE(tname) \
-TRACE_EVENT(tname, \
- TP_PROTO(struct xfs_da_args *args, int idx), \
- TP_ARGS(args, idx), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(int, op_flags) \
- __field(int, idx) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(args->dp)->i_sb->s_dev; \
- __entry->ino = args->dp->i_ino; \
- __entry->op_flags = args->op_flags; \
- __entry->idx = idx; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS), \
- __entry->idx) \
+#define DEFINE_DIR2_EVENT(name) \
+DEFINE_EVENT(xfs_dir2_class, name, \
+ TP_PROTO(struct xfs_da_args *args), \
+ TP_ARGS(args))
+DEFINE_DIR2_EVENT(xfs_dir2_sf_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_create);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_toino4);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_toino8);
+DEFINE_DIR2_EVENT(xfs_dir2_sf_to_block);
+DEFINE_DIR2_EVENT(xfs_dir2_block_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_block_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_block_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_block_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_block_to_sf);
+DEFINE_DIR2_EVENT(xfs_dir2_block_to_leaf);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_block);
+DEFINE_DIR2_EVENT(xfs_dir2_leaf_to_node);
+DEFINE_DIR2_EVENT(xfs_dir2_node_addname);
+DEFINE_DIR2_EVENT(xfs_dir2_node_lookup);
+DEFINE_DIR2_EVENT(xfs_dir2_node_replace);
+DEFINE_DIR2_EVENT(xfs_dir2_node_removename);
+DEFINE_DIR2_EVENT(xfs_dir2_node_to_leaf);
+
+DECLARE_EVENT_CLASS(xfs_dir2_space_class,
+ TP_PROTO(struct xfs_da_args *args, int idx),
+ TP_ARGS(args, idx),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(int, op_flags)
+ __field(int, idx)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(args->dp)->i_sb->s_dev;
+ __entry->ino = args->dp->i_ino;
+ __entry->op_flags = args->op_flags;
+ __entry->idx = idx;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx op_flags %s index %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __print_flags(__entry->op_flags, "|", XFS_DA_OP_FLAGS),
+ __entry->idx)
)
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_add);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_leafn_remove);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_grow_inode);
-DEFINE_DIR2_SPACE_TRACE(xfs_dir2_shrink_inode);
+
+#define DEFINE_DIR2_SPACE_EVENT(name) \
+DEFINE_EVENT(xfs_dir2_space_class, name, \
+ TP_PROTO(struct xfs_da_args *args, int idx), \
+ TP_ARGS(args, idx))
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_add);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_leafn_remove);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_grow_inode);
+DEFINE_DIR2_SPACE_EVENT(xfs_dir2_shrink_inode);
TRACE_EVENT(xfs_dir2_leafn_moveents,
TP_PROTO(struct xfs_da_args *args, int src_idx, int dst_idx, int count),
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 71af76f..873e07e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -891,7 +891,7 @@
uint flags)
{
ASSERT(mp->m_quotainfo);
- xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
+ xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
}
/*------------------------------------------------------------------------*/
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index a1c65fc..275b1f4 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -2563,43 +2563,41 @@
xfs_mount_t *mp;
xfs_perag_busy_t *bsy;
xfs_agblock_t uend, bend;
- xfs_lsn_t lsn;
+ xfs_lsn_t lsn = 0;
int cnt;
mp = tp->t_mountp;
spin_lock(&mp->m_perag[agno].pagb_lock);
- cnt = mp->m_perag[agno].pagb_count;
uend = bno + len - 1;
- /* search pagb_list for this slot, skipping open slots */
- for (bsy = mp->m_perag[agno].pagb_list; cnt; bsy++) {
+ /*
+ * search pagb_list for this slot, skipping open slots. We have to
+ * search the entire array as there may be multiple overlaps and
+ * we have to get the most recent LSN for the log force to push out
+ * all the transactions that span the range.
+ */
+ for (cnt = 0; cnt < mp->m_perag[agno].pagb_count; cnt++) {
+ bsy = &mp->m_perag[agno].pagb_list[cnt];
+ if (!bsy->busy_tp)
+ continue;
- /*
- * (start1,length1) within (start2, length2)
- */
- if (bsy->busy_tp != NULL) {
- bend = bsy->busy_start + bsy->busy_length - 1;
- if ((bno > bend) || (uend < bsy->busy_start)) {
- cnt--;
- } else {
- break;
- }
- }
+ bend = bsy->busy_start + bsy->busy_length - 1;
+ if (bno > bend || uend < bsy->busy_start)
+ continue;
+
+ /* (start1,length1) within (start2, length2) */
+ if (XFS_LSN_CMP(bsy->busy_tp->t_commit_lsn, lsn) > 0)
+ lsn = bsy->busy_tp->t_commit_lsn;
}
-
- trace_xfs_alloc_busysearch(mp, agno, bno, len, !!cnt);
+ spin_unlock(&mp->m_perag[agno].pagb_lock);
+ trace_xfs_alloc_busysearch(tp->t_mountp, agno, bno, len, lsn);
/*
* If a block was found, force the log through the LSN of the
* transaction that freed the block
*/
- if (cnt) {
- lsn = bsy->busy_tp->t_commit_lsn;
- spin_unlock(&mp->m_perag[agno].pagb_lock);
+ if (lsn)
xfs_log_force(mp, lsn, XFS_LOG_FORCE|XFS_LOG_SYNC);
- } else {
- spin_unlock(&mp->m_perag[agno].pagb_lock);
- }
}
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index d1483a4..84ca1cf 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -114,10 +114,82 @@
return error;
}
+/*
+ * We need to check that the format of the data fork in the temporary inode is
+ * valid for the target inode before doing the swap. This is not a problem with
+ * attr1 because of the fixed fork offset, but attr2 has a dynamically sized
+ * data fork depending on the space the attribute fork is taking so we can get
+ * invalid formats on the target inode.
+ *
+ * E.g. target has space for 7 extents in extent format, temp inode only has
+ * space for 6. If we defragment down to 7 extents, then the tmp format is a
+ * btree, but when swapped it needs to be in extent format. Hence we can't just
+ * blindly swap data forks on attr2 filesystems.
+ *
+ * Note that we check the swap in both directions so that we don't end up with
+ * a corrupt temporary inode, either.
+ *
+ * Note that fixing the way xfs_fsr sets up the attribute fork in the source
+ * inode will prevent this situation from occurring, so all we do here is
+ * reject and log the attempt. basically we are putting the responsibility on
+ * userspace to get this right.
+ */
+static int
+xfs_swap_extents_check_format(
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip) /* tmp inode */
+{
+
+ /* Should never get a local format */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
+ tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
+ return EINVAL;
+
+ /*
+ * if the target inode has less extents that then temporary inode then
+ * why did userspace call us?
+ */
+ if (ip->i_d.di_nextents < tip->i_d.di_nextents)
+ return EINVAL;
+
+ /*
+ * if the target inode is in extent form and the temp inode is in btree
+ * form then we will end up with the target inode in the wrong format
+ * as we already know there are less extents in the temp inode.
+ */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
+ return EINVAL;
+
+ /* Check temp in extent form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) > ip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check target in extent form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check root block of temp in btree form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(ip) &&
+ tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+ return EINVAL;
+
+ /* Check root block of target in btree form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(tip) &&
+ ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+ return EINVAL;
+
+ return 0;
+}
+
int
xfs_swap_extents(
- xfs_inode_t *ip,
- xfs_inode_t *tip,
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip, /* tmp inode */
xfs_swapext_t *sxp)
{
xfs_mount_t *mp;
@@ -161,13 +233,6 @@
goto out_unlock;
}
- /* Should never get a local format */
- if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
- tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) {
- error = XFS_ERROR(EINVAL);
- goto out_unlock;
- }
-
if (VN_CACHED(VFS_I(tip)) != 0) {
error = xfs_flushinval_pages(tip, 0, -1,
FI_REMAPF_LOCKED);
@@ -189,13 +254,12 @@
goto out_unlock;
}
- /*
- * If the target has extended attributes, the tmp file
- * must also in order to ensure the correct data fork
- * format.
- */
- if ( XFS_IFORK_Q(ip) != XFS_IFORK_Q(tip) ) {
- error = XFS_ERROR(EINVAL);
+ /* check inode formats now that data is flushed */
+ error = xfs_swap_extents_check_format(ip, tip);
+ if (error) {
+ xfs_fs_cmn_err(CE_NOTE, mp,
+ "%s: inode 0x%llx format is incompatible for exchanging.",
+ __FILE__, ip->i_ino);
goto out_unlock;
}
@@ -276,6 +340,16 @@
*tifp = *tempifp; /* struct copy */
/*
+ * Fix the in-memory data fork values that are dependent on the fork
+ * offset in the inode. We can't assume they remain the same as attr2
+ * has dynamic fork offsets.
+ */
+ ifp->if_ext_max = XFS_IFORK_SIZE(ip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+ tifp->if_ext_max = XFS_IFORK_SIZE(tip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+
+ /*
* Fix the on-disk inode values
*/
tmp = (__uint64_t)ip->i_d.di_nblocks;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index fa402a6..155e798 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -73,7 +73,6 @@
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- ASSERT(!rwsem_is_locked(&ip->i_iolock.mr_lock));
mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index ce278b3..ef77fd8 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2841,8 +2841,8 @@
mp = ip->i_mount;
/*
- * If the inode isn't dirty, then just release the inode
- * flush lock and do nothing.
+ * If the inode isn't dirty, then just release the inode flush lock and
+ * do nothing.
*/
if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
@@ -2868,6 +2868,19 @@
xfs_iunpin_wait(ip);
/*
+ * For stale inodes we cannot rely on the backing buffer remaining
+ * stale in cache for the remaining life of the stale inode and so
+ * xfs_itobp() below may give us a buffer that no longer contains
+ * inodes below. We have to check this after ensuring the inode is
+ * unpinned so that it is safe to reclaim the stale inode after the
+ * flush call.
+ */
+ if (xfs_iflags_test(ip, XFS_ISTALE)) {
+ xfs_ifunlock(ip);
+ return 0;
+ }
+
+ /*
* This may have been unpinned because the filesystem is shutting
* down forcibly. If that's the case we must not write this inode
* to disk, because the log record didn't make it to disk!
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 9e15a11..6be05f7 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -1517,6 +1517,8 @@
*/
error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1,
&postblock);
+ if (error)
+ return error;
/*
* If there are blocks not being freed at the front of the
* old extent, add summary data for them to be allocated.
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 6558ffd..6f26875 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -70,7 +70,6 @@
uint commit_flags=0;
uid_t uid=0, iuid=0;
gid_t gid=0, igid=0;
- int timeflags = 0;
struct xfs_dquot *udqp, *gdqp, *olddquot1, *olddquot2;
int need_iolock = 1;
@@ -135,16 +134,13 @@
if (flags & XFS_ATTR_NOLOCK)
need_iolock = 0;
if (!(mask & ATTR_SIZE)) {
- if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) ||
- (mp->m_flags & XFS_MOUNT_WSYNC)) {
- tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
- commit_flags = 0;
- if ((code = xfs_trans_reserve(tp, 0,
- XFS_ICHANGE_LOG_RES(mp), 0,
- 0, 0))) {
- lock_flags = 0;
- goto error_return;
- }
+ tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE);
+ commit_flags = 0;
+ code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp),
+ 0, 0, 0);
+ if (code) {
+ lock_flags = 0;
+ goto error_return;
}
} else {
if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
@@ -295,15 +291,23 @@
* or we are explicitly asked to change it. This handles
* the semantic difference between truncate() and ftruncate()
* as implemented in the VFS.
+ *
+ * The regular truncate() case without ATTR_CTIME and ATTR_MTIME
+ * is a special case where we need to update the times despite
+ * not having these flags set. For all other operations the
+ * VFS set these flags explicitly if it wants a timestamp
+ * update.
*/
- if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME))
- timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
+ if (iattr->ia_size != ip->i_size &&
+ (!(mask & (ATTR_CTIME | ATTR_MTIME)))) {
+ iattr->ia_ctime = iattr->ia_mtime =
+ current_fs_time(inode->i_sb);
+ mask |= ATTR_CTIME | ATTR_MTIME;
+ }
if (iattr->ia_size > ip->i_size) {
ip->i_d.di_size = iattr->ia_size;
ip->i_size = iattr->ia_size;
- if (!(flags & XFS_ATTR_DMI))
- xfs_ichgtime(ip, XFS_ICHGTIME_CHG);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
} else if (iattr->ia_size <= ip->i_size ||
(iattr->ia_size == 0 && ip->i_d.di_nextents)) {
@@ -374,9 +378,6 @@
ip->i_d.di_gid = gid;
inode->i_gid = gid;
}
-
- xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
- timeflags |= XFS_ICHGTIME_CHG;
}
/*
@@ -393,51 +394,37 @@
inode->i_mode &= S_IFMT;
inode->i_mode |= mode & ~S_IFMT;
-
- xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- timeflags |= XFS_ICHGTIME_CHG;
}
/*
* Change file access or modified times.
*/
- if (mask & (ATTR_ATIME|ATTR_MTIME)) {
- if (mask & ATTR_ATIME) {
- inode->i_atime = iattr->ia_atime;
- ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
- ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
- ip->i_update_core = 1;
- }
- if (mask & ATTR_MTIME) {
- inode->i_mtime = iattr->ia_mtime;
- ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
- ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
- timeflags &= ~XFS_ICHGTIME_MOD;
- timeflags |= XFS_ICHGTIME_CHG;
- }
- if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)))
- xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE);
+ if (mask & ATTR_ATIME) {
+ inode->i_atime = iattr->ia_atime;
+ ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec;
+ ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec;
+ ip->i_update_core = 1;
}
-
- /*
- * Change file inode change time only if ATTR_CTIME set
- * AND we have been called by a DMI function.
- */
-
- if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) {
+ if (mask & ATTR_CTIME) {
inode->i_ctime = iattr->ia_ctime;
ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec;
ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec;
ip->i_update_core = 1;
- timeflags &= ~XFS_ICHGTIME_CHG;
+ }
+ if (mask & ATTR_MTIME) {
+ inode->i_mtime = iattr->ia_mtime;
+ ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec;
+ ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec;
+ ip->i_update_core = 1;
}
/*
- * Send out timestamp changes that need to be set to the
- * current time. Not done when called by a DMI function.
+ * And finally, log the inode core if any attribute in it
+ * has been changed.
*/
- if (timeflags && !(flags & XFS_ATTR_DMI))
- xfs_ichgtime(ip, timeflags);
+ if (mask & (ATTR_UID|ATTR_GID|ATTR_MODE|
+ ATTR_ATIME|ATTR_CTIME|ATTR_MTIME))
+ xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
XFS_STATS_INC(xs_ig_attrchg);
@@ -452,12 +439,10 @@
* mix so this probably isn't worth the trouble to optimize.
*/
code = 0;
- if (tp) {
- if (mp->m_flags & XFS_MOUNT_WSYNC)
- xfs_trans_set_sync(tp);
+ if (mp->m_flags & XFS_MOUNT_WSYNC)
+ xfs_trans_set_sync(tp);
- code = xfs_trans_commit(tp, commit_flags);
- }
+ code = xfs_trans_commit(tp, commit_flags);
xfs_iunlock(ip, lock_flags);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 71dafb6..ffac157 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1408,7 +1408,7 @@
struct drm_ati_pcigart_info * gart_info);
extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size,
- size_t align, dma_addr_t maxaddr);
+ size_t align);
extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index 43009bc..bc4fdf2 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -160,6 +160,7 @@
#define DRM_MODE_CONNECTOR_HDMIA 11
#define DRM_MODE_CONNECTOR_HDMIB 12
#define DRM_MODE_CONNECTOR_TV 13
+#define DRM_MODE_CONNECTOR_eDP 14
struct drm_mode_get_connector {
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index ec3f5e80..b64a8d7 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -188,6 +188,7 @@
#define DRM_I915_GEM_MADVISE 0x26
#define DRM_I915_OVERLAY_PUT_IMAGE 0x27
#define DRM_I915_OVERLAY_ATTRS 0x28
+#define DRM_I915_GEM_EXECBUFFER2 0x29
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -207,6 +208,7 @@
#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
@@ -272,6 +274,7 @@
#define I915_PARAM_NUM_FENCES_AVAIL 6
#define I915_PARAM_HAS_OVERLAY 7
#define I915_PARAM_HAS_PAGEFLIPPING 8
+#define I915_PARAM_HAS_EXECBUF2 9
typedef struct drm_i915_getparam {
int param;
@@ -567,6 +570,57 @@
__u64 cliprects_ptr;
};
+struct drm_i915_gem_exec_object2 {
+ /**
+ * User's handle for a buffer to be bound into the GTT for this
+ * operation.
+ */
+ __u32 handle;
+
+ /** Number of relocations to be performed on this buffer */
+ __u32 relocation_count;
+ /**
+ * Pointer to array of struct drm_i915_gem_relocation_entry containing
+ * the relocations to be performed in this buffer.
+ */
+ __u64 relocs_ptr;
+
+ /** Required alignment in graphics aperture */
+ __u64 alignment;
+
+ /**
+ * Returned value of the updated offset of the object, for future
+ * presumed_offset writes.
+ */
+ __u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+ __u64 flags;
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
+struct drm_i915_gem_execbuffer2 {
+ /**
+ * List of gem_exec_object2 structs
+ */
+ __u64 buffers_ptr;
+ __u32 buffer_count;
+
+ /** Offset in the batchbuffer to start execution from. */
+ __u32 batch_start_offset;
+ /** Bytes used in batchbuffer from batch_start_offset */
+ __u32 batch_len;
+ __u32 DR1;
+ __u32 DR4;
+ __u32 num_cliprects;
+ /** This is a struct drm_clip_rect *cliprects */
+ __u64 cliprects_ptr;
+ __u64 flags; /* currently unused */
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
struct drm_i915_gem_pin {
/** Handle of the buffer to be pinned. */
__u32 handle;
diff --git a/include/linux/decompress/unlzo.h b/include/linux/decompress/unlzo.h
new file mode 100644
index 0000000..9872297
--- /dev/null
+++ b/include/linux/decompress/unlzo.h
@@ -0,0 +1,10 @@
+#ifndef DECOMPRESS_UNLZO_H
+#define DECOMPRESS_UNLZO_H
+
+int unlzo(unsigned char *inbuf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *pos,
+ void(*error)(char *x));
+#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9147ca8..b1bcb27 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2463,7 +2463,7 @@
int __init get_filesystem_list(char *buf);
-#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
#endif /* __KERNEL__ */
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 211ff44..ab2cc20 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -46,7 +46,7 @@
static inline unsigned int nr_free_highpages(void) { return 0; }
-#define totalhigh_pages 0
+#define totalhigh_pages 0UL
#ifndef ARCH_HAS_KMAP
static inline void *kmap(struct page *page)
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index fc5db82..02c9af3 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -89,4 +89,16 @@
unsigned short unlock_key2; /* Unlock Key 2 */
};
+struct adp5588_gpio_platform_data {
+ unsigned gpio_start; /* GPIO Chip base # */
+ unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
+ int (*setup)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ int gpio, unsigned ngpio,
+ void *context);
+ void *context;
+};
+
#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3fc9f5a..328bca6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -734,6 +734,10 @@
/* Force a compilation error if condition is constant and true */
#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
/* Force a compilation error if condition is true, but also produce a
result (of value 0 and type size_t), so the expression can be used
e.g. in a structure initializer (or where-ever else comma expressions
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 7c6b32a1..6f6c5f3 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -67,7 +67,7 @@
/**
* DECLARE_KFIFO - macro to declare a kfifo and the associated buffer
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used inside struct or union declaration
* Note2: the macro creates two objects:
@@ -91,7 +91,7 @@
/**
* DEFINE_KFIFO - macro to define and initialize a kfifo
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used for global and local kfifo data type variables
* Note2: the macro creates two objects:
@@ -104,15 +104,28 @@
#undef __kfifo_initializer
-extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+extern void kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size);
extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
gfp_t gfp_mask);
extern void kfifo_free(struct kfifo *fifo);
extern unsigned int kfifo_in(struct kfifo *fifo,
- const unsigned char *from, unsigned int len);
+ const void *from, unsigned int len);
extern __must_check unsigned int kfifo_out(struct kfifo *fifo,
- unsigned char *to, unsigned int len);
+ void *to, unsigned int len);
+extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
+ void *to, unsigned int len, unsigned offset);
+
+/**
+ * kfifo_initialized - Check if kfifo is initialized.
+ * @fifo: fifo to check
+ * Return %true if FIFO is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+static inline bool kfifo_initialized(struct kfifo *fifo)
+{
+ return fifo->buffer != 0;
+}
/**
* kfifo_reset - removes the entire FIFO contents
@@ -194,7 +207,7 @@
* bytes copied.
*/
static inline unsigned int kfifo_in_locked(struct kfifo *fifo,
- const unsigned char *from, unsigned int n, spinlock_t *lock)
+ const void *from, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
@@ -219,7 +232,7 @@
* @to buffer and returns the number of copied bytes.
*/
static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo,
- unsigned char *to, unsigned int n, spinlock_t *lock)
+ void *to, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
@@ -228,13 +241,6 @@
ret = kfifo_out(fifo, to, n);
- /*
- * optimization: if the FIFO is empty, set the indices to 0
- * so we don't wrap the next time
- */
- if (kfifo_is_empty(fifo))
- kfifo_reset(fifo);
-
spin_unlock_irqrestore(lock, flags);
return ret;
@@ -242,11 +248,11 @@
extern void kfifo_skip(struct kfifo *fifo, unsigned int len);
-extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int n);
+extern __must_check int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int n, unsigned *lenout);
-extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int n);
+extern __must_check int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int n, unsigned *lenout);
/*
* __kfifo_add_out internal helper function for updating the out offset
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 6adcc29..19ec41a 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -29,8 +29,7 @@
*
* On some architectures it is required to skip a breakpoint
* exception when it occurs after a breakpoint has been removed.
- * This can be implemented in the architecture specific portion of
- * for kgdb.
+ * This can be implemented in the architecture specific portion of kgdb.
*/
extern int kgdb_skipexception(int exception, struct pt_regs *regs);
@@ -65,7 +64,7 @@
/**
* kgdb_breakpoint - compiled in breakpoint
*
- * This will be impelmented a static inline per architecture. This
+ * This will be implemented as a static inline per architecture. This
* function is called by the kgdb core to execute an architecture
* specific trap to cause kgdb to enter the exception processing.
*
@@ -190,7 +189,7 @@
* @flags: Current IRQ state
*
* On SMP systems, we need to get the attention of the other CPUs
- * and get them be in a known state. This should do what is needed
+ * and get them into a known state. This should do what is needed
* to get the other CPUs to call kgdb_wait(). Note that on some arches,
* the NMI approach is not used for rounding up all the CPUs. For example,
* in case of MIPS, smp_call_function() is used to roundup CPUs. In
diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h
index e880d4c..08d7dc4 100644
--- a/include/linux/kmemcheck.h
+++ b/include/linux/kmemcheck.h
@@ -36,6 +36,56 @@
bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
+/*
+ * Bitfield annotations
+ *
+ * How to use: If you have a struct using bitfields, for example
+ *
+ * struct a {
+ * int x:8, y:8;
+ * };
+ *
+ * then this should be rewritten as
+ *
+ * struct a {
+ * kmemcheck_bitfield_begin(flags);
+ * int x:8, y:8;
+ * kmemcheck_bitfield_end(flags);
+ * };
+ *
+ * Now the "flags_begin" and "flags_end" members may be used to refer to the
+ * beginning and end, respectively, of the bitfield (and things like
+ * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
+ * fields should be annotated:
+ *
+ * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
+ * kmemcheck_annotate_bitfield(a, flags);
+ */
+#define kmemcheck_bitfield_begin(name) \
+ int name##_begin[0];
+
+#define kmemcheck_bitfield_end(name) \
+ int name##_end[0];
+
+#define kmemcheck_annotate_bitfield(ptr, name) \
+ do { \
+ int _n; \
+ \
+ if (!ptr) \
+ break; \
+ \
+ _n = (long) &((ptr)->name##_end) \
+ - (long) &((ptr)->name##_begin); \
+ MAYBE_BUILD_BUG_ON(_n < 0); \
+ \
+ kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
+ } while (0)
+
+#define kmemcheck_annotate_variable(var) \
+ do { \
+ kmemcheck_mark_initialized(&(var), sizeof(var)); \
+ } while (0) \
+
#else
#define kmemcheck_enabled 0
@@ -106,60 +156,16 @@
return true;
}
-#endif /* CONFIG_KMEMCHECK */
-
-/*
- * Bitfield annotations
- *
- * How to use: If you have a struct using bitfields, for example
- *
- * struct a {
- * int x:8, y:8;
- * };
- *
- * then this should be rewritten as
- *
- * struct a {
- * kmemcheck_bitfield_begin(flags);
- * int x:8, y:8;
- * kmemcheck_bitfield_end(flags);
- * };
- *
- * Now the "flags_begin" and "flags_end" members may be used to refer to the
- * beginning and end, respectively, of the bitfield (and things like
- * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
- * fields should be annotated:
- *
- * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
- * kmemcheck_annotate_bitfield(a, flags);
- *
- * Note: We provide the same definitions for both kmemcheck and non-
- * kmemcheck kernels. This makes it harder to introduce accidental errors. It
- * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield().
- */
-#define kmemcheck_bitfield_begin(name) \
- int name##_begin[0];
-
-#define kmemcheck_bitfield_end(name) \
- int name##_end[0];
-
-#define kmemcheck_annotate_bitfield(ptr, name) \
- do { \
- int _n; \
- \
- if (!ptr) \
- break; \
- \
- _n = (long) &((ptr)->name##_end) \
- - (long) &((ptr)->name##_begin); \
- MAYBE_BUILD_BUG_ON(_n < 0); \
- \
- kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
+#define kmemcheck_bitfield_begin(name)
+#define kmemcheck_bitfield_end(name)
+#define kmemcheck_annotate_bitfield(ptr, name) \
+ do { \
} while (0)
-#define kmemcheck_annotate_variable(var) \
- do { \
- kmemcheck_mark_initialized(&(var), sizeof(var)); \
- } while (0) \
+#define kmemcheck_annotate_variable(var) \
+ do { \
+ } while (0)
+
+#endif /* CONFIG_KMEMCHECK */
#endif /* LINUX_KMEMCHECK_H */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 6a9c4dd..7311225 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -354,6 +354,9 @@
/* max tries if error condition is still set after ->error_handler */
ATA_EH_MAX_TRIES = 5,
+ /* sometimes resuming a link requires several retries */
+ ATA_LINK_RESUME_TRIES = 5,
+
/* how hard are we gonna try to probe/recover devices */
ATA_PROBE_MAX_TRIES = 3,
ATA_EH_DEV_TRIES = 3,
diff --git a/include/linux/list_sort.h b/include/linux/list_sort.h
new file mode 100644
index 0000000..1a2df2e
--- /dev/null
+++ b/include/linux/list_sort.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_LIST_SORT_H
+#define _LINUX_LIST_SORT_H
+
+#include <linux/types.h>
+
+struct list_head;
+
+void list_sort(void *priv, struct list_head *head,
+ int (*cmp)(void *priv, struct list_head *a,
+ struct list_head *b));
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 6b9c5d0..9cb1834 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -2,6 +2,8 @@
#define MFD_TMIO_H
#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
#define tmio_ioread8(addr) readb(addr)
#define tmio_ioread16(addr) readw(addr)
@@ -18,11 +20,48 @@
writew((val) >> 16, (addr) + 2); \
} while (0)
+#define CNF_CMD 0x04
+#define CNF_CTL_BASE 0x10
+#define CNF_INT_PIN 0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+ tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+ tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+ do { \
+ tmio_iowrite16((val), (base) + ((reg) << (shift))); \
+ tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+ } while (0)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
/*
* data for the MMC controller
*/
struct tmio_mmc_data {
const unsigned int hclk;
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
};
/*
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index be3264e..e786fe9 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -666,20 +666,20 @@
#define WM8350_ISINK_FLASH_DUR_64MS (1 << 8)
#define WM8350_ISINK_FLASH_DUR_96MS (2 << 8)
#define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8)
-#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4)
-#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4)
-#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4)
-#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0)
+#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4)
/*
* Regulator Interrupts.
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2265f28..60c467b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1089,6 +1089,7 @@
/* nommu.c */
extern atomic_long_t mmap_pages_allocated;
+extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
/* prio_tree.c */
void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 84a524a..36f9627 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -122,7 +122,9 @@
unsigned long vm_pgoff; /* the offset in vm_file corresponding to vm_start */
struct file *vm_file; /* the backing file or NULL */
- atomic_t vm_usage; /* region usage count */
+ int vm_usage; /* region usage count (access under nommu_region_sem) */
+ bool vm_icache_flushed : 1; /* true if the icache has been flushed for
+ * this region */
};
/*
@@ -203,10 +205,12 @@
struct vm_area_struct * mmap; /* list of VMAs */
struct rb_root mm_rb;
struct vm_area_struct * mmap_cache; /* last find_vma result */
+#ifdef CONFIG_MMU
unsigned long (*get_unmapped_area) (struct file *filp,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+#endif
unsigned long mmap_base; /* base of mmap area */
unsigned long task_size; /* size of task vm space */
unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 5da0690..174e539 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -243,6 +243,7 @@
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* Only allow D0 and D3 */
unsigned int wakeup_prepared:1;
+ unsigned int d3_delay; /* D3->D0 transition time in ms */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index b1368b8..7968def 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -447,6 +447,7 @@
int phy_device_register(struct phy_device *phy);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_init_hw(struct phy_device *phydev);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
struct phy_device * phy_attach(struct net_device *dev,
diff --git a/include/linux/poison.h b/include/linux/poison.h
index 7fc194a..2110a81 100644
--- a/include/linux/poison.h
+++ b/include/linux/poison.h
@@ -2,13 +2,25 @@
#define _LINUX_POISON_H
/********** include/linux/list.h **********/
+
+/*
+ * Architectures might want to move the poison pointer offset
+ * into some well-recognized area such as 0xdead000000000000,
+ * that is also not mappable by user-space exploits:
+ */
+#ifdef CONFIG_ILLEGAL_POINTER_VALUE
+# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL)
+#else
+# define POISON_POINTER_DELTA 0
+#endif
+
/*
* These are non-NULL pointers that will result in page faults
* under normal circumstances, used to verify that nobody uses
* non-initialized list entries.
*/
-#define LIST_POISON1 ((void *) 0x00100100)
-#define LIST_POISON2 ((void *) 0x00200200)
+#define LIST_POISON1 ((void *) 0x00100100 + POISON_POINTER_DELTA)
+#define LIST_POISON2 ((void *) 0x00200200 + POISON_POINTER_DELTA)
/********** include/linux/timer.h **********/
/*
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8d4991b..6f7bba9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -377,6 +377,8 @@
#include <linux/aio.h>
+#ifdef CONFIG_MMU
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
extern unsigned long
arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
unsigned long, unsigned long);
@@ -386,6 +388,9 @@
unsigned long flags);
extern void arch_unmap_area(struct mm_struct *, unsigned long);
extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
+#endif
#if USE_SPLIT_PTLOCKS
/*
@@ -2491,8 +2496,6 @@
#endif /* CONFIG_SMP */
-extern void arch_pick_mmap_layout(struct mm_struct *mm);
-
#ifdef CONFIG_TRACING
extern void
__trace_special(void *__tr, void *__data,
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e2f3044..813d26c 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -136,25 +136,6 @@
spin_unlock_irq(&serio->lock);
}
-/*
- * Use the following functions to pin serio's driver in process context
- */
-static inline int serio_pin_driver(struct serio *serio)
-{
- return mutex_lock_interruptible(&serio->drv_mutex);
-}
-
-static inline void serio_pin_driver_uninterruptible(struct serio *serio)
-{
- mutex_lock(&serio->drv_mutex);
-}
-
-static inline void serio_unpin_driver(struct serio *serio)
-{
- mutex_unlock(&serio->drv_mutex);
-}
-
-
#endif
/*
diff --git a/include/linux/string.h b/include/linux/string.h
index 651839a..a716ee2 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -72,7 +72,10 @@
}
#ifndef __HAVE_ARCH_STRSTR
-extern char * strstr(const char *,const char *);
+extern char * strstr(const char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNSTR
+extern char * strnstr(const char *, const char *, size_t);
#endif
#ifndef __HAVE_ARCH_STRLEN
extern __kernel_size_t strlen(const char *);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index ef3a294..6abfcf5 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -464,7 +464,7 @@
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
-extern inline struct tty_port *tty_port_get(struct tty_port *port)
+static inline struct tty_port *tty_port_get(struct tty_port *port)
{
if (port)
kref_get(&port->kref);
@@ -486,7 +486,7 @@
struct tty_struct *tty, struct file *filp);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
-extern inline int tty_port_users(struct tty_port *port)
+static inline int tty_port_users(struct tty_port *port)
{
return port->count + port->blocked_open;
}
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 6b58367..d512d98 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -94,6 +94,7 @@
* happens, handle that and return -EFAULT.
*/
extern long probe_kernel_read(void *dst, void *src, size_t size);
+extern long __probe_kernel_read(void *dst, void *src, size_t size);
/*
* probe_kernel_write(): safely attempt to write to a location
@@ -104,6 +105,7 @@
* Safely write to address @dst from the buffer at @src. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-extern long probe_kernel_write(void *dst, void *src, size_t size);
+extern long notrace probe_kernel_write(void *dst, void *src, size_t size);
+extern long notrace __probe_kernel_write(void *dst, void *src, size_t size);
#endif /* __LINUX_UACCESS_H__ */
diff --git a/include/net/ip.h b/include/net/ip.h
index 85108cf..fb63371 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -326,6 +326,22 @@
#endif
+static inline int sk_mc_loop(struct sock *sk)
+{
+ if (!sk)
+ return 1;
+ switch (sk->sk_family) {
+ case AF_INET:
+ return inet_sk(sk)->mc_loop;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ case AF_INET6:
+ return inet6_sk(sk)->mc_loop;
+#endif
+ }
+ WARN_ON(1);
+ return 1;
+}
+
extern int ip_call_ra_chain(struct sk_buff *skb);
/*
diff --git a/init/Kconfig b/init/Kconfig
index a23da9f..d95ca7c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -115,10 +115,13 @@
config HAVE_KERNEL_LZMA
bool
+config HAVE_KERNEL_LZO
+ bool
+
choice
prompt "Kernel compression mode"
default KERNEL_GZIP
- depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO
help
The linux kernel is a kind of self-extracting executable.
Several compression algorithms are available, which differ
@@ -141,9 +144,8 @@
bool "Gzip"
depends on HAVE_KERNEL_GZIP
help
- The old and tried gzip compression. Its compression ratio is
- the poorest among the 3 choices; however its speed (both
- compression and decompression) is the fastest.
+ The old and tried gzip compression. It provides a good balance
+ between compression ratio and decompression speed.
config KERNEL_BZIP2
bool "Bzip2"
@@ -164,6 +166,14 @@
two. Compression is slowest. The kernel size is about 33%
smaller with LZMA in comparison to gzip.
+config KERNEL_LZO
+ bool "LZO"
+ depends on HAVE_KERNEL_LZO
+ help
+ Its compression ratio is the poorest among the 4. The kernel
+ size is about about 10% bigger than gzip; however its speed
+ (both compression and decompression) is the fastest.
+
endchoice
config SWAP
diff --git a/ipc/shm.c b/ipc/shm.c
index 92fe923..23256b8 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -298,6 +298,9 @@
.mmap = shm_mmap,
.fsync = shm_fsync,
.release = shm_release,
+#ifndef CONFIG_MMU
+ .get_unmapped_area = shm_get_unmapped_area,
+#endif
};
static const struct file_operations shm_file_operations_huge = {
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 0249f4b..1fbcc74 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2468,7 +2468,6 @@
/* make sure l doesn't vanish out from under us */
down_write(&l->mutex);
mutex_unlock(&cgrp->pidlist_mutex);
- l->use_count++;
return l;
}
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 8e3c3ff..d9b3a22 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -203,8 +203,6 @@
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ,
- * VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
@@ -216,7 +214,7 @@
* lock_page() might sleep, the caller should not hold a spinlock.
*/
static int
-get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
@@ -239,7 +237,7 @@
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
@@ -248,7 +246,7 @@
}
again:
- err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
+ err = get_user_pages_fast(address, 1, 1, &page);
if (err < 0)
return err;
@@ -867,7 +865,7 @@
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
@@ -913,10 +911,10 @@
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -1175,11 +1173,10 @@
pi_state = NULL;
}
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2,
- requeue_pi ? VERIFY_WRITE : VERIFY_READ);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -1738,7 +1735,7 @@
*/
retry:
q->key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &q->key);
if (unlikely(ret != 0))
return ret;
@@ -1904,7 +1901,7 @@
q.requeue_pi_key = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &q.key);
if (unlikely(ret != 0))
goto out;
@@ -2023,7 +2020,7 @@
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
@@ -2215,7 +2212,7 @@
rt_waiter.task = NULL;
key2 = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out;
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index e92d519..32c5c15 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -28,7 +28,7 @@
#include <linux/log2.h>
#include <linux/uaccess.h>
-static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+static void _kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size)
{
fifo->buffer = buffer;
@@ -41,10 +41,10 @@
* kfifo_init - initialize a FIFO using a preallocated buffer
* @fifo: the fifo to assign the buffer
* @buffer: the preallocated buffer to be used.
- * @size: the size of the internal buffer, this have to be a power of 2.
+ * @size: the size of the internal buffer, this has to be a power of 2.
*
*/
-void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size)
+void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size)
{
/* size must be a power of 2 */
BUG_ON(!is_power_of_2(size));
@@ -159,8 +159,9 @@
memcpy(to + l, fifo->buffer, len - l);
}
-static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int off)
+static inline int __kfifo_from_user_data(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned int off,
+ unsigned *lenout)
{
unsigned int l;
int ret;
@@ -177,16 +178,20 @@
/* first put the data starting from fifo->in to buffer end */
l = min(len, fifo->size - off);
ret = copy_from_user(fifo->buffer + off, from, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ if (unlikely(ret)) {
+ *lenout = ret;
+ return -EFAULT;
+ }
+ *lenout = l;
/* then put the rest (if any) at the beginning of the buffer */
- return copy_from_user(fifo->buffer, from + l, len - l);
+ ret = copy_from_user(fifo->buffer, from + l, len - l);
+ *lenout += ret ? ret : len - l;
+ return ret ? -EFAULT : 0;
}
-static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int off)
+static inline int __kfifo_to_user_data(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned int off, unsigned *lenout)
{
unsigned int l;
int ret;
@@ -203,12 +208,21 @@
/* first get the data from fifo->out until the end of the buffer */
l = min(len, fifo->size - off);
ret = copy_to_user(to, fifo->buffer + off, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ *lenout = l;
+ if (unlikely(ret)) {
+ *lenout -= ret;
+ return -EFAULT;
+ }
/* then get the rest (if any) from the beginning of the buffer */
- return copy_to_user(to + l, fifo->buffer, len - l);
+ len -= l;
+ ret = copy_to_user(to + l, fifo->buffer, len);
+ if (unlikely(ret)) {
+ *lenout += len - ret;
+ return -EFAULT;
+ }
+ *lenout += len;
+ return 0;
}
unsigned int __kfifo_in_n(struct kfifo *fifo,
@@ -235,7 +249,7 @@
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from,
+unsigned int kfifo_in(struct kfifo *fifo, const void *from,
unsigned int len)
{
len = min(kfifo_avail(fifo), len);
@@ -277,7 +291,7 @@
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len)
+unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len)
{
len = min(kfifo_len(fifo), len);
@@ -288,6 +302,27 @@
}
EXPORT_SYMBOL(kfifo_out);
+/**
+ * kfifo_out_peek - copy some data from the FIFO, but do not remove it
+ * @fifo: the fifo to be used.
+ * @to: where the data must be copied.
+ * @len: the size of the destination buffer.
+ * @offset: offset into the fifo
+ *
+ * This function copies at most @len bytes at @offset from the FIFO
+ * into the @to buffer and returns the number of copied bytes.
+ * The data is not removed from the FIFO.
+ */
+unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len,
+ unsigned offset)
+{
+ len = min(kfifo_len(fifo), len + offset);
+
+ __kfifo_out_data(fifo, to, len, offset);
+ return len;
+}
+EXPORT_SYMBOL(kfifo_out_peek);
+
unsigned int __kfifo_out_generic(struct kfifo *fifo,
void *to, unsigned int len, unsigned int recsize,
unsigned int *total)
@@ -299,10 +334,13 @@
unsigned int __kfifo_from_user_n(struct kfifo *fifo,
const void __user *from, unsigned int len, unsigned int recsize)
{
+ unsigned total;
+
if (kfifo_avail(fifo) < len + recsize)
return len + 1;
- return __kfifo_from_user_data(fifo, from, len, recsize);
+ __kfifo_from_user_data(fifo, from, len, recsize, &total);
+ return total;
}
EXPORT_SYMBOL(__kfifo_from_user_n);
@@ -313,18 +351,21 @@
* @len: the length of the data to be added.
*
* This function copies at most @len bytes from the @from into the
- * FIFO depending and returns the number of copied bytes.
+ * FIFO depending and returns -EFAULT/0.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int len)
+int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned *total)
{
+ int ret;
len = min(kfifo_avail(fifo), len);
- len -= __kfifo_from_user_data(fifo, from, len, 0);
+ ret = __kfifo_from_user_data(fifo, from, len, 0, total);
+ if (ret)
+ return ret;
__kfifo_add_in(fifo, len);
- return len;
+ return 0;
}
EXPORT_SYMBOL(kfifo_from_user);
@@ -339,17 +380,17 @@
void __user *to, unsigned int len, unsigned int reclen,
unsigned int recsize)
{
- unsigned int ret;
+ unsigned int ret, total;
if (kfifo_len(fifo) < reclen + recsize)
return len;
- ret = __kfifo_to_user_data(fifo, to, reclen, recsize);
+ ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total);
if (likely(ret == 0))
__kfifo_add_out(fifo, reclen + recsize);
- return ret;
+ return total;
}
EXPORT_SYMBOL(__kfifo_to_user_n);
@@ -358,20 +399,22 @@
* @fifo: the fifo to be used.
* @to: where the data must be copied.
* @len: the size of the destination buffer.
+ @ @lenout: pointer to output variable with copied data
*
* This function copies at most @len bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
+ * @to buffer and 0 or -EFAULT.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int len)
+int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned *lenout)
{
+ int ret;
len = min(kfifo_len(fifo), len);
- len -= __kfifo_to_user_data(fifo, to, len, 0);
- __kfifo_add_out(fifo, len);
- return len;
+ ret = __kfifo_to_user_data(fifo, to, len, 0, lenout);
+ __kfifo_add_out(fifo, *lenout);
+ return ret;
}
EXPORT_SYMBOL(kfifo_to_user);
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 25b1031..bf0e231 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -520,13 +520,15 @@
return -ENOMEM;
ret = call_usermodehelper_stdinpipe(sub_info, filp);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ call_usermodehelper_freeinfo(sub_info);
+ return ret;
+ }
- return call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC);
+ ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC);
+ if (ret < 0) /* Failed to execute helper, close pipe */
+ filp_close(*filp, NULL);
- out:
- call_usermodehelper_freeinfo(sub_info);
return ret;
}
EXPORT_SYMBOL(call_usermodehelper_pipe);
diff --git a/kernel/module.c b/kernel/module.c
index e96b8ed..f82386b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1010,6 +1010,12 @@
* J. Corbet <corbet@lwn.net>
*/
#if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+
+static inline bool sect_empty(const Elf_Shdr *sect)
+{
+ return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0;
+}
+
struct module_sect_attr
{
struct module_attribute mattr;
@@ -1051,8 +1057,7 @@
/* Count loaded sections and allocate structures */
for (i = 0; i < nsect; i++)
- if (sechdrs[i].sh_flags & SHF_ALLOC
- && sechdrs[i].sh_size)
+ if (!sect_empty(&sechdrs[i]))
nloaded++;
size[0] = ALIGN(sizeof(*sect_attrs)
+ nloaded * sizeof(sect_attrs->attrs[0]),
@@ -1070,9 +1075,7 @@
sattr = §_attrs->attrs[0];
gattr = §_attrs->grp.attrs[0];
for (i = 0; i < nsect; i++) {
- if (! (sechdrs[i].sh_flags & SHF_ALLOC))
- continue;
- if (!sechdrs[i].sh_size)
+ if (sect_empty(&sechdrs[i]))
continue;
sattr->address = sechdrs[i].sh_addr;
sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
@@ -1156,7 +1159,7 @@
/* Count notes sections and allocate structures. */
notes = 0;
for (i = 0; i < nsect; i++)
- if ((sechdrs[i].sh_flags & SHF_ALLOC) &&
+ if (!sect_empty(&sechdrs[i]) &&
(sechdrs[i].sh_type == SHT_NOTE))
++notes;
@@ -1172,7 +1175,7 @@
notes_attrs->notes = notes;
nattr = ¬es_attrs->attrs[0];
for (loaded = i = 0; i < nsect; ++i) {
- if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+ if (sect_empty(&sechdrs[i]))
continue;
if (sechdrs[i].sh_type == SHT_NOTE) {
nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
diff --git a/kernel/signal.c b/kernel/signal.c
index d09692b..934ae5e 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -979,7 +979,8 @@
for (i = 0; i < 16; i++) {
unsigned char insn;
- __get_user(insn, (unsigned char *)(regs->ip + i));
+ if (get_user(insn, (unsigned char *)(regs->ip + i)))
+ break;
printk("%02x ", insn);
}
}
diff --git a/kernel/smp.c b/kernel/smp.c
index de735a6..f104084 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -347,7 +347,7 @@
goto call;
/* Try for same node. */
- nodemask = cpumask_of_node(cpu);
+ nodemask = cpumask_of_node(cpu_to_node(cpu));
for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids;
cpu = cpumask_next_and(cpu, nodemask, mask)) {
if (cpu_online(cpu))
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7968762..1e6640f 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1690,7 +1690,7 @@
static int ftrace_match(char *str, char *regex, int len, int type)
{
int matched = 0;
- char *ptr;
+ int slen;
switch (type) {
case MATCH_FULL:
@@ -1706,8 +1706,8 @@
matched = 1;
break;
case MATCH_END_ONLY:
- ptr = strstr(str, regex);
- if (ptr && (ptr[len] == 0))
+ slen = strlen(str);
+ if (slen >= len && memcmp(str + slen - len, regex, len) == 0)
matched = 1;
break;
}
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2326b04..edefe3b 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2869,7 +2869,7 @@
* Splice the empty reader page into the list around the head.
*/
reader = rb_set_head_page(cpu_buffer);
- cpu_buffer->reader_page->list.next = reader->list.next;
+ cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
cpu_buffer->reader_page->list.prev = reader->list.prev;
/*
@@ -2906,7 +2906,7 @@
*
* Now make the new head point back to the reader page.
*/
- reader->list.next->prev = &cpu_buffer->reader_page->list;
+ rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
/* Finally update the reader page to the new head */
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 50504cb..e42af9a 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -211,8 +211,9 @@
{
char **addr = (char **)(event + pred->offset);
int cmp, match;
+ int len = strlen(*addr) + 1; /* including tailing '\0' */
- cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len);
+ cmp = pred->regex.match(*addr, &pred->regex, len);
match = cmp ^ pred->not;
@@ -251,7 +252,18 @@
return 0;
}
-/* Basic regex callbacks */
+/*
+ * regex_match_foo - Basic regex callbacks
+ *
+ * @str: the string to be searched
+ * @r: the regex structure containing the pattern string
+ * @len: the length of the string to be searched (including '\0')
+ *
+ * Note:
+ * - @str might not be NULL-terminated if it's of type DYN_STRING
+ * or STATIC_STRING
+ */
+
static int regex_match_full(char *str, struct regex *r, int len)
{
if (strncmp(str, r->pattern, len) == 0)
@@ -261,23 +273,24 @@
static int regex_match_front(char *str, struct regex *r, int len)
{
- if (strncmp(str, r->pattern, len) == 0)
+ if (strncmp(str, r->pattern, r->len) == 0)
return 1;
return 0;
}
static int regex_match_middle(char *str, struct regex *r, int len)
{
- if (strstr(str, r->pattern))
+ if (strnstr(str, r->pattern, len))
return 1;
return 0;
}
static int regex_match_end(char *str, struct regex *r, int len)
{
- char *ptr = strstr(str, r->pattern);
+ int strlen = len - 1;
- if (ptr && (ptr[r->len] == 0))
+ if (strlen >= r->len &&
+ memcmp(str + strlen - r->len, r->pattern, r->len) == 0)
return 1;
return 0;
}
@@ -781,10 +794,8 @@
pred->regex.field_len = field->size;
} else if (field->filter_type == FILTER_DYN_STRING)
fn = filter_pred_strloc;
- else {
+ else
fn = filter_pred_pchar;
- pred->regex.field_len = strlen(pred->regex.pattern);
- }
} else {
if (field->is_signed)
ret = strict_strtoll(pred->regex.pattern, 0, &val);
diff --git a/lib/Kconfig b/lib/Kconfig
index 1cfe516..97b136f 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -117,6 +117,10 @@
config DECOMPRESS_LZMA
tristate
+config DECOMPRESS_LZO
+ select LZO_DECOMPRESS
+ tristate
+
#
# Generic allocator support is selected if needed
#
diff --git a/lib/Makefile b/lib/Makefile
index 347ad8d..3b0b4a6 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,7 @@
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o
+ string_helpers.o gcd.o list_sort.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
@@ -69,6 +69,7 @@
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
diff --git a/lib/decompress.c b/lib/decompress.c
index d2842f5..a760681 100644
--- a/lib/decompress.c
+++ b/lib/decompress.c
@@ -9,6 +9,7 @@
#include <linux/decompress/bunzip2.h>
#include <linux/decompress/unlzma.h>
#include <linux/decompress/inflate.h>
+#include <linux/decompress/unlzo.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -22,6 +23,9 @@
#ifndef CONFIG_DECOMPRESS_LZMA
# define unlzma NULL
#endif
+#ifndef CONFIG_DECOMPRESS_LZO
+# define unlzo NULL
+#endif
static const struct compress_format {
unsigned char magic[2];
@@ -32,6 +36,7 @@
{ {037, 0236}, "gzip", gunzip },
{ {0x42, 0x5a}, "bzip2", bunzip2 },
{ {0x5d, 0x00}, "lzma", unlzma },
+ { {0x89, 0x4c}, "lzo", unlzo },
{ {0, 0}, NULL, NULL }
};
diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c
new file mode 100644
index 0000000..db521f4
--- /dev/null
+++ b/lib/decompress_unlzo.c
@@ -0,0 +1,209 @@
+/*
+ * LZO decompressor for the Linux kernel. Code borrowed from the lzo
+ * implementation by Markus Franz Xaver Johannes Oberhumer.
+ *
+ * Linux kernel adaptation:
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * Original code:
+ * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
+ * All Rights Reserved.
+ *
+ * lzop and the LZO library are free software; you can redistribute them
+ * and/or modify them under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Markus F.X.J. Oberhumer
+ * <markus@oberhumer.com>
+ * http://www.oberhumer.com/opensource/lzop/
+ */
+
+#ifdef STATIC
+#include "lzo/lzo1x_decompress.c"
+#else
+#include <linux/slab.h>
+#include <linux/decompress/unlzo.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/lzo.h>
+#include <linux/decompress/mm.h>
+
+#include <linux/compiler.h>
+#include <asm/unaligned.h>
+
+static const unsigned char lzop_magic[] = {
+ 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
+
+#define LZO_BLOCK_SIZE (256*1024l)
+#define HEADER_HAS_FILTER 0x00000800L
+
+STATIC inline int INIT parse_header(u8 *input, u8 *skip)
+{
+ int l;
+ u8 *parse = input;
+ u8 level = 0;
+ u16 version;
+
+ /* read magic: 9 first bits */
+ for (l = 0; l < 9; l++) {
+ if (*parse++ != lzop_magic[l])
+ return 0;
+ }
+ /* get version (2bytes), skip library version (2),
+ * 'need to be extracted' version (2) and
+ * method (1) */
+ version = get_unaligned_be16(parse);
+ parse += 7;
+ if (version >= 0x0940)
+ level = *parse++;
+ if (get_unaligned_be32(parse) & HEADER_HAS_FILTER)
+ parse += 8; /* flags + filter info */
+ else
+ parse += 4; /* flags */
+
+ /* skip mode and mtime_low */
+ parse += 8;
+ if (version >= 0x0940)
+ parse += 4; /* skip mtime_high */
+
+ l = *parse++;
+ /* don't care about the file name, and skip checksum */
+ parse += l + 4;
+
+ *skip = parse - input;
+ return 1;
+}
+
+STATIC inline int INIT unlzo(u8 *input, int in_len,
+ int (*fill) (void *, unsigned int),
+ int (*flush) (void *, unsigned int),
+ u8 *output, int *posp,
+ void (*error_fn) (char *x))
+{
+ u8 skip = 0, r = 0;
+ u32 src_len, dst_len;
+ size_t tmp;
+ u8 *in_buf, *in_buf_save, *out_buf;
+ int obytes_processed = 0;
+
+ set_error_fn(error_fn);
+
+ if (output) {
+ out_buf = output;
+ } else if (!flush) {
+ error("NULL output pointer and no flush function provided");
+ goto exit;
+ } else {
+ out_buf = malloc(LZO_BLOCK_SIZE);
+ if (!out_buf) {
+ error("Could not allocate output buffer");
+ goto exit;
+ }
+ }
+
+ if (input && fill) {
+ error("Both input pointer and fill function provided, don't know what to do");
+ goto exit_1;
+ } else if (input) {
+ in_buf = input;
+ } else if (!fill || !posp) {
+ error("NULL input pointer and missing position pointer or fill function");
+ goto exit_1;
+ } else {
+ in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
+ if (!in_buf) {
+ error("Could not allocate input buffer");
+ goto exit_1;
+ }
+ }
+ in_buf_save = in_buf;
+
+ if (posp)
+ *posp = 0;
+
+ if (fill)
+ fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
+
+ if (!parse_header(input, &skip)) {
+ error("invalid header");
+ goto exit_2;
+ }
+ in_buf += skip;
+
+ if (posp)
+ *posp = skip;
+
+ for (;;) {
+ /* read uncompressed block size */
+ dst_len = get_unaligned_be32(in_buf);
+ in_buf += 4;
+
+ /* exit if last block */
+ if (dst_len == 0) {
+ if (posp)
+ *posp += 4;
+ break;
+ }
+
+ if (dst_len > LZO_BLOCK_SIZE) {
+ error("dest len longer than block size");
+ goto exit_2;
+ }
+
+ /* read compressed block size, and skip block checksum info */
+ src_len = get_unaligned_be32(in_buf);
+ in_buf += 8;
+
+ if (src_len <= 0 || src_len > dst_len) {
+ error("file corrupted");
+ goto exit_2;
+ }
+
+ /* decompress */
+ tmp = dst_len;
+ r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
+ out_buf, &tmp);
+
+ if (r != LZO_E_OK || dst_len != tmp) {
+ error("Compressed data violation");
+ goto exit_2;
+ }
+
+ obytes_processed += dst_len;
+ if (flush)
+ flush(out_buf, dst_len);
+ if (output)
+ out_buf += dst_len;
+ if (posp)
+ *posp += src_len + 12;
+ if (fill) {
+ in_buf = in_buf_save;
+ fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
+ } else
+ in_buf += src_len;
+ }
+
+exit_2:
+ if (!input)
+ free(in_buf);
+exit_1:
+ if (!output)
+ free(out_buf);
+exit:
+ return obytes_processed;
+}
+
+#define decompress unlzo
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index cf90620..7d2f0b3 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -913,6 +913,9 @@
ref->size);
}
+ if (entry->direction == DMA_BIDIRECTIONAL)
+ goto out;
+
if (ref->direction != entry->direction) {
err_printk(dev, entry, "DMA-API: device driver syncs "
"DMA memory with different direction "
@@ -923,9 +926,6 @@
dir2name[ref->direction]);
}
- if (entry->direction == DMA_BIDIRECTIONAL)
- goto out;
-
if (to_cpu && !(entry->direction == DMA_FROM_DEVICE) &&
!(ref->direction == DMA_TO_DEVICE))
err_printk(dev, entry, "DMA-API: device driver syncs "
@@ -948,7 +948,6 @@
out:
put_hash_bucket(bucket, &flags);
-
}
void debug_dma_map_page(struct device *dev, struct page *page, size_t offset,
diff --git a/lib/list_sort.c b/lib/list_sort.c
new file mode 100644
index 0000000..19d11e0
--- /dev/null
+++ b/lib/list_sort.c
@@ -0,0 +1,102 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list_sort.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+/**
+ * list_sort - sort a list.
+ * @priv: private data, passed to @cmp
+ * @head: the list to sort
+ * @cmp: the elements comparison function
+ *
+ * This function has been implemented by Mark J Roberts <mjr@znex.org>. It
+ * implements "merge sort" which has O(nlog(n)) complexity. The list is sorted
+ * in ascending order.
+ *
+ * The comparison function @cmp is supposed to return a negative value if @a is
+ * less than @b, and a positive value if @a is greater than @b. If @a and @b
+ * are equivalent, then it does not matter what this function returns.
+ */
+void list_sort(void *priv, struct list_head *head,
+ int (*cmp)(void *priv, struct list_head *a,
+ struct list_head *b))
+{
+ struct list_head *p, *q, *e, *list, *tail, *oldhead;
+ int insize, nmerges, psize, qsize, i;
+
+ if (list_empty(head))
+ return;
+
+ list = head->next;
+ list_del(head);
+ insize = 1;
+ for (;;) {
+ p = oldhead = list;
+ list = tail = NULL;
+ nmerges = 0;
+
+ while (p) {
+ nmerges++;
+ q = p;
+ psize = 0;
+ for (i = 0; i < insize; i++) {
+ psize++;
+ q = q->next == oldhead ? NULL : q->next;
+ if (!q)
+ break;
+ }
+
+ qsize = insize;
+ while (psize > 0 || (qsize > 0 && q)) {
+ if (!psize) {
+ e = q;
+ q = q->next;
+ qsize--;
+ if (q == oldhead)
+ q = NULL;
+ } else if (!qsize || !q) {
+ e = p;
+ p = p->next;
+ psize--;
+ if (p == oldhead)
+ p = NULL;
+ } else if (cmp(priv, p, q) <= 0) {
+ e = p;
+ p = p->next;
+ psize--;
+ if (p == oldhead)
+ p = NULL;
+ } else {
+ e = q;
+ q = q->next;
+ qsize--;
+ if (q == oldhead)
+ q = NULL;
+ }
+ if (tail)
+ tail->next = e;
+ else
+ list = e;
+ e->prev = tail;
+ tail = e;
+ }
+ p = q;
+ }
+
+ tail->next = list;
+ list->prev = tail;
+
+ if (nmerges <= 1)
+ break;
+
+ insize *= 2;
+ }
+
+ head->next = list;
+ head->prev = list->prev;
+ list->prev->next = head;
+ list->prev = head;
+}
+
+EXPORT_SYMBOL(list_sort);
diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
index 5dc6b29..f2fd098 100644
--- a/lib/lzo/lzo1x_decompress.c
+++ b/lib/lzo/lzo1x_decompress.c
@@ -11,11 +11,13 @@
* Richard Purdie <rpurdie@openedhand.com>
*/
+#ifndef STATIC
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/lzo.h>
-#include <asm/byteorder.h>
+#endif
+
#include <asm/unaligned.h>
+#include <linux/lzo.h>
#include "lzodefs.h"
#define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x))
@@ -244,9 +246,10 @@
*out_len = op - out;
return LZO_E_LOOKBEHIND_OVERRUN;
}
-
+#ifndef STATIC
EXPORT_SYMBOL_GPL(lzo1x_decompress_safe);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("LZO1X Decompressor");
+#endif
diff --git a/lib/rational.c b/lib/rational.c
index b3c099b..3ed247b 100644
--- a/lib/rational.c
+++ b/lib/rational.c
@@ -7,6 +7,7 @@
*/
#include <linux/rational.h>
+#include <linux/module.h>
/*
* calculate best rational approximation for a given fraction
diff --git a/lib/string.c b/lib/string.c
index 9f75b4e..a1cdcfc 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -667,7 +667,7 @@
*/
char *strstr(const char *s1, const char *s2)
{
- int l1, l2;
+ size_t l1, l2;
l2 = strlen(s2);
if (!l2)
@@ -684,6 +684,31 @@
EXPORT_SYMBOL(strstr);
#endif
+#ifndef __HAVE_ARCH_STRNSTR
+/**
+ * strnstr - Find the first substring in a length-limited string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ * @len: the maximum number of characters to search
+ */
+char *strnstr(const char *s1, const char *s2, size_t len)
+{
+ size_t l1 = len, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(strnstr);
+#endif
+
#ifndef __HAVE_ARCH_MEMCHR
/**
* memchr - Find a character in an area of memory.
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index d4996cf..3b8aeec 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -903,7 +903,7 @@
* IPv6 omits the colons (01020304...0f)
* IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
* - 'I6c' for IPv6 addresses printed as specified by
- * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt
+ * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
* - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form
* "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
* Options for %pU are:
@@ -1188,7 +1188,7 @@
* %pI6 print an IPv6 address with colons
* %pi6 print an IPv6 address without colons
* %pI6c print an IPv6 address as specified by
- * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt
+ * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
* %pU[bBlL] print a UUID/GUID in big or little endian using lower or upper
* case.
* %n is ignored
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 8550b0c..215447c 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -8,6 +8,21 @@
#include "inflate.h"
#include "inffast.h"
+/* Only do the unaligned "Faster" variant when
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
+ *
+ * On powerpc, it won't be as we don't include autoconf.h
+ * automatically for the boot wrapper, which is intended as
+ * we run in an environment where we may not be able to deal
+ * with (even rare) alignment faults. In addition, we do not
+ * define __KERNEL__ for arch/powerpc/boot unlike x86
+ */
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#endif
+
#ifndef ASMINF
/* Allow machine dependent optimization for post-increment or pre-increment.
@@ -24,9 +39,11 @@
#ifdef POSTINC
# define OFF 0
# define PUP(a) *(a)++
+# define UP_UNALIGNED(a) get_unaligned((a)++)
#else
# define OFF 1
# define PUP(a) *++(a)
+# define UP_UNALIGNED(a) get_unaligned(++(a))
#endif
/*
@@ -239,18 +256,62 @@
}
}
else {
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ unsigned short *sout;
+ unsigned long loops;
+
+ from = out - dist; /* copy direct from output */
+ /* minimum length is three */
+ /* Align out addr */
+ if (!((long)(out - 1 + OFF) & 1)) {
+ PUP(out) = PUP(from);
+ len--;
+ }
+ sout = (unsigned short *)(out - OFF);
+ if (dist > 2) {
+ unsigned short *sfrom;
+
+ sfrom = (unsigned short *)(from - OFF);
+ loops = len >> 1;
+ do
+ PUP(sout) = UP_UNALIGNED(sfrom);
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ from = (unsigned char *)sfrom + OFF;
+ } else { /* dist == 1 or dist == 2 */
+ unsigned short pat16;
+
+ pat16 = *(sout-2+2*OFF);
+ if (dist == 1)
+#if defined(__BIG_ENDIAN)
+ pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8);
+#elif defined(__LITTLE_ENDIAN)
+ pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8);
+#else
+#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined
+#endif
+ loops = len >> 1;
+ do
+ PUP(sout) = pat16;
+ while (--loops);
+ out = (unsigned char *)sout + OFF;
+ }
+ if (len & 1)
+ PUP(out) = PUP(from);
+#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
from = out - dist; /* copy direct from output */
do { /* minimum length is three */
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- PUP(out) = PUP(from);
- len -= 3;
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
} while (len > 2);
if (len) {
- PUP(out) = PUP(from);
- if (len > 1)
- PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
}
+#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
}
}
else if ((op & 64) == 0) { /* 2nd level distance code */
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 65f38c2..94cd94d 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -402,7 +402,7 @@
{
int i;
- if (unlikely(sz > MAX_ORDER_NR_PAGES)) {
+ if (unlikely(sz/PAGE_SIZE > MAX_ORDER_NR_PAGES)) {
clear_gigantic_page(page, addr, sz);
return;
}
@@ -2088,7 +2088,7 @@
entry = pte_mkwrite(pte_mkdirty(huge_ptep_get(ptep)));
if (huge_ptep_set_access_flags(vma, address, ptep, entry, 1)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
}
}
@@ -2559,7 +2559,7 @@
entry = pte_mkyoung(entry);
if (huge_ptep_set_access_flags(vma, address, ptep, entry,
flags & FAULT_FLAG_WRITE))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
out_page_table_lock:
spin_unlock(&mm->page_table_lock);
diff --git a/mm/maccess.c b/mm/maccess.c
index 9073695..4e348db 100644
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -14,7 +14,11 @@
* Safely read from address @src to the buffer at @dst. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-long probe_kernel_read(void *dst, void *src, size_t size)
+
+long __weak probe_kernel_read(void *dst, void *src, size_t size)
+ __attribute__((alias("__probe_kernel_read")));
+
+long __probe_kernel_read(void *dst, void *src, size_t size)
{
long ret;
mm_segment_t old_fs = get_fs();
@@ -39,7 +43,10 @@
* Safely write to address @dst from the buffer at @src. If a kernel fault
* happens, handle that and return -EFAULT.
*/
-long notrace __weak probe_kernel_write(void *dst, void *src, size_t size)
+long __weak probe_kernel_write(void *dst, void *src, size_t size)
+ __attribute__((alias("__probe_kernel_write")));
+
+long __probe_kernel_write(void *dst, void *src, size_t size)
{
long ret;
mm_segment_t old_fs = get_fs();
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 488b644..954032b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2586,7 +2586,7 @@
if (free_all)
goto try_to_free;
move_account:
- while (mem->res.usage > 0) {
+ do {
ret = -EBUSY;
if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children))
goto out;
@@ -2614,8 +2614,8 @@
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
- }
- ret = 0;
+ /* "ret" should also be checked to ensure all lists are empty. */
+ } while (mem->res.usage > 0 || ret);
out:
css_put(&mem->css);
return ret;
@@ -2648,10 +2648,7 @@
}
lru_add_drain();
/* try move_account...there may be some *locked* pages. */
- if (mem->res.usage)
- goto move_account;
- ret = 0;
- goto out;
+ goto move_account;
}
int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event)
diff --git a/mm/memory.c b/mm/memory.c
index 09e4b1b..72fb5f3 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1593,7 +1593,7 @@
/* Ok, finally just insert the thing.. */
entry = pte_mkspecial(pfn_pte(pfn, prot));
set_pte_at(mm, addr, pte, entry);
- update_mmu_cache(vma, addr, entry); /* XXX: why not for insert_page? */
+ update_mmu_cache(vma, addr, pte); /* XXX: why not for insert_page? */
retval = 0;
out_unlock:
@@ -2116,7 +2116,7 @@
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, address, page_table, entry,1))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
ret |= VM_FAULT_WRITE;
goto unlock;
}
@@ -2185,7 +2185,7 @@
* new page to be mapped directly into the secondary page table.
*/
set_pte_at_notify(mm, address, page_table, entry);
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
if (old_page) {
/*
* Only after switching the pte to the new page may
@@ -2629,7 +2629,7 @@
}
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, pte);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
out:
@@ -2694,7 +2694,7 @@
set_pte_at(mm, address, page_table, entry);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
return 0;
@@ -2855,7 +2855,7 @@
set_pte_at(mm, address, page_table, entry);
/* no need to invalidate: a not-present page won't be cached */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
} else {
if (charged)
mem_cgroup_uncharge_page(page);
@@ -2992,7 +2992,7 @@
}
entry = pte_mkyoung(entry);
if (ptep_set_access_flags(vma, address, pte, entry, flags & FAULT_FLAG_WRITE)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, pte);
} else {
/*
* This is needed only for protection faults but the arch code
diff --git a/mm/migrate.c b/mm/migrate.c
index efddbf0..e58e5da 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -134,7 +134,7 @@
page_add_file_rmap(new);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, addr, pte);
+ update_mmu_cache(vma, addr, ptep);
unlock:
pte_unmap_unlock(ptep, ptl);
out:
diff --git a/mm/nommu.c b/mm/nommu.c
index 6f9248f..48a2ecf 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -432,6 +432,7 @@
/*
* Ok, looks good - let it rip.
*/
+ flush_icache_range(mm->brk, brk);
return mm->brk = brk;
}
@@ -551,11 +552,11 @@
static void __put_nommu_region(struct vm_region *region)
__releases(nommu_region_sem)
{
- kenter("%p{%d}", region, atomic_read(®ion->vm_usage));
+ kenter("%p{%d}", region, region->vm_usage);
BUG_ON(!nommu_region_tree.rb_node);
- if (atomic_dec_and_test(®ion->vm_usage)) {
+ if (--region->vm_usage == 0) {
if (region->vm_top > region->vm_start)
delete_nommu_region(region);
up_write(&nommu_region_sem);
@@ -1204,7 +1205,7 @@
if (!vma)
goto error_getting_vma;
- atomic_set(®ion->vm_usage, 1);
+ region->vm_usage = 1;
region->vm_flags = vm_flags;
region->vm_pgoff = pgoff;
@@ -1271,7 +1272,7 @@
}
/* we've found a region we can share */
- atomic_inc(&pregion->vm_usage);
+ pregion->vm_usage++;
vma->vm_region = pregion;
start = pregion->vm_start;
start += (pgoff - pregion->vm_pgoff) << PAGE_SHIFT;
@@ -1288,7 +1289,7 @@
vma->vm_region = NULL;
vma->vm_start = 0;
vma->vm_end = 0;
- atomic_dec(&pregion->vm_usage);
+ pregion->vm_usage--;
pregion = NULL;
goto error_just_free;
}
@@ -1353,10 +1354,14 @@
share:
add_vma_to_mm(current->mm, vma);
- up_write(&nommu_region_sem);
+ /* we flush the region from the icache only when the first executable
+ * mapping of it is made */
+ if (vma->vm_flags & VM_EXEC && !region->vm_icache_flushed) {
+ flush_icache_range(region->vm_start, region->vm_end);
+ region->vm_icache_flushed = true;
+ }
- if (prot & PROT_EXEC)
- flush_icache_range(result, result + len);
+ up_write(&nommu_region_sem);
kleave(" = %lx", result);
return result;
@@ -1436,10 +1441,9 @@
kenter("");
- /* we're only permitted to split anonymous regions that have a single
- * owner */
- if (vma->vm_file ||
- atomic_read(&vma->vm_region->vm_usage) != 1)
+ /* we're only permitted to split anonymous regions (these should have
+ * only a single usage on the region) */
+ if (vma->vm_file)
return -ENOMEM;
if (mm->map_count >= sysctl_max_map_count)
@@ -1513,7 +1517,7 @@
/* cut the backing region down to size */
region = vma->vm_region;
- BUG_ON(atomic_read(®ion->vm_usage) != 1);
+ BUG_ON(region->vm_usage != 1);
down_write(&nommu_region_sem);
delete_nommu_region(region);
@@ -1757,27 +1761,6 @@
EXPORT_SYMBOL(unmap_mapping_range);
/*
- * ask for an unmapped area at which to create a mapping on a file
- */
-unsigned long get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff,
- unsigned long flags)
-{
- unsigned long (*get_area)(struct file *, unsigned long, unsigned long,
- unsigned long, unsigned long);
-
- get_area = current->mm->get_unmapped_area;
- if (file && file->f_op && file->f_op->get_unmapped_area)
- get_area = file->f_op->get_unmapped_area;
-
- if (!get_area)
- return -ENOSYS;
-
- return get_area(file, addr, len, pgoff, flags);
-}
-EXPORT_SYMBOL(get_unmapped_area);
-
-/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
* succeed and -ENOMEM implies there is not.
@@ -1916,9 +1899,11 @@
/* only read or write mappings where it is permitted */
if (write && vma->vm_flags & VM_MAYWRITE)
- len -= copy_to_user((void *) addr, buf, len);
+ copy_to_user_page(vma, NULL, addr,
+ (void *) addr, buf, len);
else if (!write && vma->vm_flags & VM_MAYREAD)
- len -= copy_from_user(buf, (void *) addr, len);
+ copy_from_user_page(vma, NULL, addr,
+ buf, (void *) addr, len);
else
len = 0;
} else {
@@ -1929,3 +1914,65 @@
mmput(mm);
return len;
}
+
+/**
+ * nommu_shrink_inode_mappings - Shrink the shared mappings on an inode
+ * @inode: The inode to check
+ * @size: The current filesize of the inode
+ * @newsize: The proposed filesize of the inode
+ *
+ * Check the shared mappings on an inode on behalf of a shrinking truncate to
+ * make sure that that any outstanding VMAs aren't broken and then shrink the
+ * vm_regions that extend that beyond so that do_mmap_pgoff() doesn't
+ * automatically grant mappings that are too large.
+ */
+int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
+ size_t newsize)
+{
+ struct vm_area_struct *vma;
+ struct prio_tree_iter iter;
+ struct vm_region *region;
+ pgoff_t low, high;
+ size_t r_size, r_top;
+
+ low = newsize >> PAGE_SHIFT;
+ high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ down_write(&nommu_region_sem);
+
+ /* search for VMAs that fall within the dead zone */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ low, high) {
+ /* found one - only interested if it's shared out of the page
+ * cache */
+ if (vma->vm_flags & VM_SHARED) {
+ up_write(&nommu_region_sem);
+ return -ETXTBSY; /* not quite true, but near enough */
+ }
+ }
+
+ /* reduce any regions that overlap the dead zone - if in existence,
+ * these will be pointed to by VMAs that don't overlap the dead zone
+ *
+ * we don't check for any regions that start beyond the EOF as there
+ * shouldn't be any
+ */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ 0, ULONG_MAX) {
+ if (!(vma->vm_flags & VM_SHARED))
+ continue;
+
+ region = vma->vm_region;
+ r_size = region->vm_top - region->vm_start;
+ r_top = (region->vm_pgoff << PAGE_SHIFT) + r_size;
+
+ if (r_top > newsize) {
+ region->vm_top -= r_top - newsize;
+ if (region->vm_end > region->vm_top)
+ region->vm_end = region->vm_top;
+ }
+ }
+
+ up_write(&nommu_region_sem);
+ return 0;
+}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4e9f5cc..d2a8889 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1222,10 +1222,10 @@
}
spin_lock_irqsave(&zone->lock, flags);
page = __rmqueue(zone, order, migratetype);
- __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
spin_unlock(&zone->lock);
if (!page)
goto failed;
+ __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
}
__count_zone_vm_events(PGALLOC, zone, 1 << order);
@@ -3998,7 +3998,7 @@
}
/* Merge backward if suitable */
- if (start_pfn < early_node_map[i].end_pfn &&
+ if (start_pfn < early_node_map[i].start_pfn &&
end_pfn >= early_node_map[i].start_pfn) {
early_node_map[i].start_pfn = start_pfn;
return;
diff --git a/mm/percpu.c b/mm/percpu.c
index 442010c..083e7c9 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1271,7 +1271,7 @@
*/
void free_percpu(void *ptr)
{
- void *addr = __pcpu_ptr_to_addr(ptr);
+ void *addr;
struct pcpu_chunk *chunk;
unsigned long flags;
int off;
@@ -1279,6 +1279,8 @@
if (!ptr)
return;
+ addr = __pcpu_ptr_to_addr(ptr);
+
spin_lock_irqsave(&pcpu_lock, flags);
chunk = pcpu_chunk_addr_search(addr);
diff --git a/mm/truncate.c b/mm/truncate.c
index 342deee..e87e372 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -522,22 +522,20 @@
*/
void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
{
- if (new < old) {
- struct address_space *mapping = inode->i_mapping;
+ struct address_space *mapping = inode->i_mapping;
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, new);
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- }
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, new);
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
}
EXPORT_SYMBOL(truncate_pagecache);
diff --git a/mm/util.c b/mm/util.c
index 7c35ad9..834db7b 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -220,7 +220,7 @@
}
EXPORT_SYMBOL(strndup_user);
-#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+#if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT)
void arch_pick_mmap_layout(struct mm_struct *mm)
{
mm->mmap_base = TASK_UNMAPPED_BASE;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 885207a..c26986c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1922,6 +1922,9 @@
if (!populated_zone(zone))
continue;
+ if (zone_is_all_unreclaimable(zone))
+ continue;
+
if (!zone_watermark_ok(zone, order, high_wmark_pages(zone),
0, 0))
return 1;
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index bd1c654..0b7f262 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1406,6 +1406,9 @@
{
int ret;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
switch(cmd) {
case EBT_SO_SET_ENTRIES:
ret = do_replace(sock_net(sk), user, len);
@@ -1425,6 +1428,9 @@
struct ebt_replace tmp;
struct ebt_table *t;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
if (copy_from_user(&tmp, user, sizeof(tmp)))
return -EFAULT;
diff --git a/net/core/sock.c b/net/core/sock.c
index 76ff58d..e1f6f22 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1205,6 +1205,10 @@
if (newsk->sk_prot->sockets_allocated)
percpu_counter_inc(newsk->sk_prot->sockets_allocated);
+
+ if (sock_flag(newsk, SOCK_TIMESTAMP) ||
+ sock_flag(newsk, SOCK_TIMESTAMPING_RX_SOFTWARE))
+ net_enable_timestamp();
}
out:
return newsk;
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e34013a..3451799 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -254,7 +254,7 @@
*/
if (rt->rt_flags&RTCF_MULTICAST) {
- if ((!sk || inet_sk(sk)->mc_loop)
+ if (sk_mc_loop(sk)
#ifdef CONFIG_IP_MROUTE
/* Small optimization: do not loopback not local frames,
which returned after forwarding; they will be dropped
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index df159ff..4bac362 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -559,6 +559,11 @@
return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
}
+static inline struct net *ipv6_skb_net(struct sk_buff *skb)
+{
+ return skb_dst(skb) ? dev_net(skb_dst(skb)->dev) : dev_net(skb->dev);
+}
+
/* Router Alert as of RFC 2711 */
static int ipv6_hop_ra(struct sk_buff *skb, int optoff)
@@ -580,8 +585,8 @@
static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
{
const unsigned char *nh = skb_network_header(skb);
+ struct net *net = ipv6_skb_net(skb);
u32 pkt_len;
- struct net *net = dev_net(skb_dst(skb)->dev);
if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index cd48801..eb6d097 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -121,10 +121,9 @@
skb->dev = dev;
if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
- struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL;
struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
- if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) &&
+ if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) &&
((mroute6_socket(dev_net(dev)) &&
!(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 80c16f6..32abae3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -15,12 +15,14 @@
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
#include "driver-ops.h"
+#include "wme.h"
/**
* DOC: Interface list locking
@@ -314,7 +316,7 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
- netif_start_queue(dev);
+ netif_tx_start_all_queues(dev);
return 0;
err_del_interface:
@@ -343,7 +345,7 @@
/*
* Stop TX on this interface first.
*/
- netif_stop_queue(dev);
+ netif_tx_stop_all_queues(dev);
/*
* Now delete all active aggregation sessions.
@@ -644,6 +646,12 @@
WARN_ON(flushed);
}
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
@@ -652,8 +660,38 @@
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_netdev_select_queue,
};
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+ u8 *p;
+
+ if (local->hw.queues < 4)
+ return 0;
+
+ if (skb->len < 4 ||
+ skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+ return 0; /* doesn't matter, frame will be dropped */
+
+ hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ skb->priority = 7;
+ return ieee802_1d_to_ac[skb->priority];
+ }
+
+ p = ieee80211_get_qos_ctl(hdr);
+ skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+
+ return ieee80211_downgrade_queue(local, skb);
+}
+
static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
@@ -662,6 +700,7 @@
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_monitor_select_queue,
};
static void ieee80211_if_setup(struct net_device *dev)
@@ -768,8 +807,8 @@
ASSERT_RTNL();
- ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
- name, ieee80211_if_setup);
+ ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
+ name, ieee80211_if_setup, local->hw.queues);
if (!ndev)
return -ENOMEM;
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c79e59f..05a18f4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -942,7 +942,7 @@
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
- netif_start_queue(sdata->dev);
+ netif_tx_start_all_queues(sdata->dev);
netif_carrier_on(sdata->dev);
}
@@ -1074,7 +1074,7 @@
* time -- we don't want the scan code to enable queues.
*/
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
rcu_read_lock();
@@ -1963,7 +1963,9 @@
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- /* XXX: differentiate, can only happen for CSA now! */
+ if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
+ break;
+
ieee80211_sta_process_chanswitch(sdata,
&mgmt->u.action.u.chan_switch.sw_elem,
ifmgd->associated);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9f2807a..82a30c1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1746,7 +1746,9 @@
memset(info, 0, sizeof(*info));
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
info->control.vif = &rx->sdata->vif;
- ieee80211_select_queue(local, fwd_skb);
+ skb_set_queue_mapping(skb,
+ ieee80211_select_queue(rx->sdata, fwd_skb));
+ ieee80211_set_qos_hdr(local, skb);
if (is_multicast_ether_addr(fwd_hdr->addr1))
IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
fwded_mcast);
@@ -2013,6 +2015,10 @@
}
break;
default:
+ /* do not process rejected action frames */
+ if (mgmt->u.action.category & 0x80)
+ return RX_DROP_MONITOR;
+
return RX_CONTINUE;
}
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f1a4c71..f934c96 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -353,10 +353,10 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated) {
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
} else
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
/* re-enable beaconing */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
@@ -411,7 +411,7 @@
* are handled in the scan state machine
*/
if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
}
mutex_unlock(&local->iflist_mtx);
@@ -575,7 +575,7 @@
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
if (sdata->u.mgd.associated)
ieee80211_scan_ps_enable(sdata);
}
@@ -610,7 +610,7 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
}
mutex_unlock(&local->iflist_mtx);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 27ceaef..ac210b5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1512,7 +1512,7 @@
return;
}
- ieee80211_select_queue(local, skb);
+ ieee80211_set_qos_hdr(local, skb);
ieee80211_tx(sdata, skb, false);
rcu_read_unlock();
}
@@ -2291,6 +2291,9 @@
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
+ /* send all internal mgmt frames on VO */
+ skb_set_queue_mapping(skb, 0);
+
/*
* The other path calling ieee80211_xmit is from the tasklet,
* and while we can handle concurrent transmissions locking
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index dc76267..3848140 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -269,6 +269,7 @@
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
@@ -281,6 +282,11 @@
if (!skb_queue_empty(&local->pending[queue]))
tasklet_schedule(&local->tx_pending_tasklet);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
@@ -305,11 +311,17 @@
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
__set_bit(reason, &local->queue_stop_reasons[queue]);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_stop_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index b19b769..79d887d 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -44,22 +44,69 @@
}
-/* Indicate which queue to use. */
-static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
+/* Indicate which queue to use. */
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta = NULL;
+ u32 sta_flags = 0;
+ const u8 *ra = NULL;
+ bool qos = false;
- if (!ieee80211_is_data(hdr->frame_control)) {
- /* management frames go on AC_VO queue, but are sent
- * without QoS control fields */
- return 0;
+ if (local->hw.queues < 4 || skb->len < 6) {
+ skb->priority = 0; /* required for correct WPA/11i MIC */
+ return min_t(u16, local->hw.queues - 1,
+ ieee802_1d_to_ac[skb->priority]);
}
- if (0 /* injected */) {
- /* use AC from radiotap */
+ rcu_read_lock();
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ rcu_read_lock();
+ sta = rcu_dereference(sdata->u.vlan.sta);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
+ rcu_read_unlock();
+ if (sta)
+ break;
+ case NL80211_IFTYPE_AP:
+ ra = skb->data;
+ break;
+ case NL80211_IFTYPE_WDS:
+ ra = sdata->u.wds.remote_addr;
+ break;
+#ifdef CONFIG_MAC80211_MESH
+ case NL80211_IFTYPE_MESH_POINT:
+ /*
+ * XXX: This is clearly broken ... but already was before,
+ * because ieee80211_fill_mesh_addresses() would clear A1
+ * except for multicast addresses.
+ */
+ break;
+#endif
+ case NL80211_IFTYPE_STATION:
+ ra = sdata->u.mgd.bssid;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ ra = skb->data;
+ break;
+ default:
+ break;
}
- if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ if (!sta && ra && !is_multicast_ether_addr(ra)) {
+ sta = sta_info_get(local, ra);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
+ }
+
+ if (sta_flags & WLAN_STA_WME)
+ qos = true;
+
+ rcu_read_unlock();
+
+ if (!qos) {
skb->priority = 0; /* required for correct WPA/11i MIC */
return ieee802_1d_to_ac[skb->priority];
}
@@ -68,6 +115,12 @@
* data frame has */
skb->priority = cfg80211_classify8021d(skb);
+ return ieee80211_downgrade_queue(local, skb);
+}
+
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb)
+{
/* in case we are a client verify acm is not set for this ac */
while (unlikely(local->wmm_acm & BIT(skb->priority))) {
if (wme_downgrade_ac(skb)) {
@@ -85,24 +138,17 @@
return ieee802_1d_to_ac[skb->priority];
}
-void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb)
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 queue;
- u8 tid;
+ struct ieee80211_hdr *hdr = (void *)skb->data;
- queue = classify80211(local, skb);
- if (unlikely(queue >= local->hw.queues))
- queue = local->hw.queues - 1;
-
- /*
- * Now we know the 1d priority, fill in the QoS header if
- * there is one (and we haven't done this before).
- */
+ /* Fill in the QoS header if there is one. */
if (ieee80211_is_data_qos(hdr->frame_control)) {
u8 *p = ieee80211_get_qos_ctl(hdr);
- u8 ack_policy = 0;
+ u8 ack_policy = 0, tid;
+
tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+
if (unlikely(local->wifi_wme_noack_test))
ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
QOS_CONTROL_ACK_POLICY_SHIFT;
@@ -110,6 +156,4 @@
*p++ = ack_policy | tid;
*p = 0;
}
-
- skb_set_queue_mapping(skb, queue);
}
diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h
index d4fd87c..6053b1c 100644
--- a/net/mac80211/wme.h
+++ b/net/mac80211/wme.h
@@ -20,7 +20,11 @@
extern const int ieee802_1d_to_ac[8];
-void ieee80211_select_queue(struct ieee80211_local *local,
- struct sk_buff *skb);
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb);
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb);
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb);
+
#endif /* _WME_H */
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index 79a6980..f2d7623 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -112,7 +112,8 @@
module, choose M here. If unsure, say N.
config IP_VS_WRR
- tristate "weighted round-robin scheduling"
+ tristate "weighted round-robin scheduling"
+ select GCD
---help---
The weighted robin-robin scheduling algorithm directs network
connections to different real servers based on server weights
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 6bde12d..c37ac2d 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2077,6 +2077,10 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_SET_MAX)
+ return -EINVAL;
+ if (len < 0 || len > MAX_ARG_LEN)
+ return -EINVAL;
if (len != set_arglen[SET_CMDID(cmd)]) {
pr_err("set_ctl: len %u != %u\n",
len, set_arglen[SET_CMDID(cmd)]);
@@ -2352,17 +2356,25 @@
{
unsigned char arg[128];
int ret = 0;
+ unsigned int copylen;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (cmd < IP_VS_BASE_CTL || cmd > IP_VS_SO_GET_MAX)
+ return -EINVAL;
+
if (*len < get_arglen[GET_CMDID(cmd)]) {
pr_err("get_ctl: len %u < %u\n",
*len, get_arglen[GET_CMDID(cmd)]);
return -EINVAL;
}
- if (copy_from_user(arg, user, get_arglen[GET_CMDID(cmd)]) != 0)
+ copylen = get_arglen[GET_CMDID(cmd)];
+ if (copylen > 128)
+ return -EINVAL;
+
+ if (copy_from_user(arg, user, copylen) != 0)
return -EFAULT;
if (mutex_lock_interruptible(&__ip_vs_mutex))
diff --git a/net/netfilter/ipvs/ip_vs_wrr.c b/net/netfilter/ipvs/ip_vs_wrr.c
index 6182e8e..3c115fc 100644
--- a/net/netfilter/ipvs/ip_vs_wrr.c
+++ b/net/netfilter/ipvs/ip_vs_wrr.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/net.h>
+#include <linux/gcd.h>
#include <net/ip_vs.h>
@@ -38,20 +39,6 @@
};
-/*
- * Get the gcd of server weights
- */
-static int gcd(int a, int b)
-{
- int c;
-
- while ((c = a % b)) {
- a = b;
- b = c;
- }
- return b;
-}
-
static int ip_vs_wrr_gcd_weight(struct ip_vs_service *svc)
{
struct ip_vs_dest *dest;
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index 38ea7ef..f0732aa 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -323,24 +323,24 @@
struct nf_ct_ftp_master *info, int dir,
struct sk_buff *skb)
{
- unsigned int i, oldest = NUM_SEQ_TO_REMEMBER;
+ unsigned int i, oldest;
/* Look for oldest: if we find exact match, we're done. */
for (i = 0; i < info->seq_aft_nl_num[dir]; i++) {
if (info->seq_aft_nl[dir][i] == nl_seq)
return;
-
- if (oldest == info->seq_aft_nl_num[dir] ||
- before(info->seq_aft_nl[dir][i],
- info->seq_aft_nl[dir][oldest]))
- oldest = i;
}
if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) {
info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq;
- } else if (oldest != NUM_SEQ_TO_REMEMBER &&
- after(nl_seq, info->seq_aft_nl[dir][oldest])) {
- info->seq_aft_nl[dir][oldest] = nl_seq;
+ } else {
+ if (before(info->seq_aft_nl[dir][0], info->seq_aft_nl[dir][1]))
+ oldest = 0;
+ else
+ oldest = 1;
+
+ if (after(nl_seq, info->seq_aft_nl[dir][oldest]))
+ info->seq_aft_nl[dir][oldest] = nl_seq;
}
}
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index e0516a2..f126d18 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1021,8 +1021,20 @@
status = TP_STATUS_SEND_REQUEST;
err = dev_queue_xmit(skb);
- if (unlikely(err > 0 && (err = net_xmit_errno(err)) != 0))
- goto out_xmit;
+ if (unlikely(err > 0)) {
+ err = net_xmit_errno(err);
+ if (err && __packet_get_status(po, ph) ==
+ TP_STATUS_AVAILABLE) {
+ /* skb was destructed already */
+ skb = NULL;
+ goto out_status;
+ }
+ /*
+ * skb was dropped but not destructed yet;
+ * let's treat it like congestion or err < 0
+ */
+ err = 0;
+ }
packet_increment_head(&po->tx_ring);
len_sum += tp_len;
} while (likely((ph != NULL) ||
@@ -1033,9 +1045,6 @@
err = len_sum;
goto out_put;
-out_xmit:
- skb->destructor = sock_wfree;
- atomic_dec(&po->tx_ring.pending);
out_status:
__packet_set_status(po, ph, status);
kfree_skb(skb);
diff --git a/net/rose/rose_loopback.c b/net/rose/rose_loopback.c
index 114df6e..968e8ba 100644
--- a/net/rose/rose_loopback.c
+++ b/net/rose/rose_loopback.c
@@ -75,7 +75,7 @@
lci_i = ((skb->data[0] << 8) & 0xF00) + ((skb->data[1] << 0) & 0x0FF);
frametype = skb->data[2];
dest = (rose_address *)(skb->data + 4);
- lci_o = 0xFFF - lci_i;
+ lci_o = ROSE_DEFAULT_MAXVC + 1 - lci_i;
skb_reset_transport_header(skb);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 89ab66e..67fdac9 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2087,8 +2087,7 @@
if (copy_from_user(&sp->autoclose, optval, optlen))
return -EFAULT;
/* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */
- if (sp->autoclose > (MAX_SCHEDULE_TIMEOUT / HZ) )
- sp->autoclose = (__u32)(MAX_SCHEDULE_TIMEOUT / HZ) ;
+ sp->autoclose = min_t(long, sp->autoclose, MAX_SCHEDULE_TIMEOUT / HZ);
return 0;
}
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 3c3c50f..f7a7f83 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -644,7 +644,22 @@
p = gss_fill_context(p, end, ctx, gss_msg->auth->mech);
if (IS_ERR(p)) {
err = PTR_ERR(p);
- gss_msg->msg.errno = (err == -EAGAIN) ? -EAGAIN : -EACCES;
+ switch (err) {
+ case -EACCES:
+ gss_msg->msg.errno = err;
+ err = mlen;
+ break;
+ case -EFAULT:
+ case -ENOMEM:
+ case -EINVAL:
+ case -ENOSYS:
+ gss_msg->msg.errno = -EAGAIN;
+ break;
+ default:
+ printk(KERN_CRIT "%s: bad return from "
+ "gss_fill_context: %zd\n", __func__, err);
+ BUG();
+ }
goto err_release_msg;
}
gss_msg->ctx = gss_get_ctx(ctx);
diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index ef45eba..2deb0ed 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -131,8 +131,10 @@
struct krb5_ctx *ctx;
int tmp;
- if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS)))
+ if (!(ctx = kzalloc(sizeof(*ctx), GFP_NOFS))) {
+ p = ERR_PTR(-ENOMEM);
goto out_err;
+ }
p = simple_get_bytes(p, end, &ctx->initiate, sizeof(ctx->initiate));
if (IS_ERR(p))
diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c
index 6efbb0c..76e4c6f 100644
--- a/net/sunrpc/auth_gss/gss_mech_switch.c
+++ b/net/sunrpc/auth_gss/gss_mech_switch.c
@@ -252,7 +252,7 @@
struct gss_ctx **ctx_id)
{
if (!(*ctx_id = kzalloc(sizeof(**ctx_id), GFP_KERNEL)))
- return GSS_S_FAILURE;
+ return -ENOMEM;
(*ctx_id)->mech_type = gss_mech_get(mech);
return mech->gm_ops
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 1c924ee..7d1f9e9 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -699,7 +699,8 @@
spin_unlock_bh(&pool->sp_lock);
len = 0;
- if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) {
+ if (test_bit(XPT_LISTENER, &xprt->xpt_flags) &&
+ !test_bit(XPT_CLOSE, &xprt->xpt_flags)) {
struct svc_xprt *newxpt;
newxpt = xprt->xpt_ops->xpo_accept(xprt);
if (newxpt) {
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c2a2c56..92b8124 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -745,9 +745,9 @@
mutex_unlock(&rdev->devlist_mtx);
dev_put(dev);
}
-#ifdef CONFIG_CFG80211_WEXT
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+#ifdef CONFIG_CFG80211_WEXT
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
@@ -760,10 +760,10 @@
break;
}
wdev_unlock(wdev);
+#endif
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
-#endif
break;
case NETDEV_UNREGISTER:
/*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index baa898a..7a0754c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1690,7 +1690,7 @@
request->wiphy_idx = WIPHY_IDX_STALE;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
- request->initiator = NL80211_REGDOM_SET_BY_USER,
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
queue_regulatory_request(request);
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index cd815ac..f9bdf26 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -219,8 +219,13 @@
fsize=$$(stat -c "%s" $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
-printf "%08x" $$dec_size | \
- sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+printf "%08x\n" $$dec_size | \
+ sed 's/\(..\)/\1 /g' | { \
+ read ch0 ch1 ch2 ch3; \
+ for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
+ printf '%s%03o' '\\' $$((0x$$ch)); \
+ done; \
+ } \
)
quiet_cmd_bzip2 = BZIP2 $@
@@ -235,3 +240,8 @@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index bc4114f..3257d3d 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1,5 +1,5 @@
#!/usr/bin/perl -w
-# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
+# (c) 2001, Dave Jones. (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
# (c) 2008,2009, Andy Whitcroft <apw@canonical.com>
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 445e884..090f248 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -296,46 +296,56 @@
foreach my $file (@files) {
-#Do not match excluded file patterns
+ my %hash;
+ my $tvi = find_first_section();
+ while ($tvi < @typevalue) {
+ my $start = find_starting_index($tvi);
+ my $end = find_ending_index($tvi);
+ my $exclude = 0;
+ my $i;
- my $exclude = 0;
- foreach my $line (@typevalue) {
- if ($line =~ m/^(\C):\s*(.*)/) {
- my $type = $1;
- my $value = $2;
- if ($type eq 'X') {
- if (file_match_pattern($file, $value)) {
- $exclude = 1;
- last;
- }
- }
- }
- }
+ #Do not match excluded file patterns
- if (!$exclude) {
- my $tvi = 0;
- my %hash;
- foreach my $line (@typevalue) {
+ for ($i = $start; $i < $end; $i++) {
+ my $line = $typevalue[$i];
if ($line =~ m/^(\C):\s*(.*)/) {
my $type = $1;
my $value = $2;
- if ($type eq 'F') {
+ if ($type eq 'X') {
if (file_match_pattern($file, $value)) {
- my $value_pd = ($value =~ tr@/@@);
- my $file_pd = ($file =~ tr@/@@);
- $value_pd++ if (substr($value,-1,1) ne "/");
- if ($pattern_depth == 0 ||
- (($file_pd - $value_pd) < $pattern_depth)) {
- $hash{$tvi} = $value_pd;
+ $exclude = 1;
+ }
+ }
+ }
+ }
+
+ if (!$exclude) {
+ for ($i = $start; $i < $end; $i++) {
+ my $line = $typevalue[$i];
+ if ($line =~ m/^(\C):\s*(.*)/) {
+ my $type = $1;
+ my $value = $2;
+ if ($type eq 'F') {
+ if (file_match_pattern($file, $value)) {
+ my $value_pd = ($value =~ tr@/@@);
+ my $file_pd = ($file =~ tr@/@@);
+ $value_pd++ if (substr($value,-1,1) ne "/");
+ if ($pattern_depth == 0 ||
+ (($file_pd - $value_pd) < $pattern_depth)) {
+ $hash{$tvi} = $value_pd;
+ }
}
}
}
}
- $tvi++;
}
- foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) {
- add_categories($line);
- }
+
+ $tvi += ($end - $start);
+
+ }
+
+ foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) {
+ add_categories($line);
}
if ($email && $email_git) {
@@ -570,6 +580,20 @@
return $formatted_email;
}
+sub find_first_section {
+ my $index = 0;
+
+ while ($index < @typevalue) {
+ my $tv = $typevalue[$index];
+ if (($tv =~ m/^(\C):\s*(.*)/)) {
+ last;
+ }
+ $index++;
+ }
+
+ return $index;
+}
+
sub find_starting_index {
my ($index) = @_;
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 5f0fcb7..ce3e40b 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -154,7 +154,7 @@
if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
$target = $1;
}
- if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 6f426af..220213e 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -804,7 +804,7 @@
match = strstr(symbol, name);
if (!match)
return 0;
- return match[strlen(symbol)] == '\0';
+ return match[strlen(name)] == '\0';
}
static void do_table(void *symval, unsigned long size,
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 92f09fe..ea6f6e3 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -194,7 +194,7 @@
}
}
-if ($arch eq "x86") {
+if ($arch =~ /(x86(_64)?)|(i386)/) {
if ($bits == 64) {
$arch = "x86_64";
} else {
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 8a00ade..2aceebf 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -80,9 +80,8 @@
return tomoyo_find_next_domain(bprm);
/*
* Read permission is checked against interpreters using next domain.
- * '1' is the result of open_to_namei_flags(O_RDONLY).
*/
- return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1);
+ return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
}
static int tomoyo_path_truncate(struct path *path, loff_t length,
@@ -184,10 +183,6 @@
static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
{
int flags = f->f_flags;
-
- if ((flags + 1) & O_ACCMODE)
- flags++;
- flags |= f->f_flags & (O_APPEND | O_TRUNC);
/* Don't check read permission here if called from do_execve(). */
if (current->in_execve)
return 0;
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 7872a02..563d196 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -468,5 +468,5 @@
unregister_chrdev(major, "alsa");
}
-module_init(alsa_sound_init)
-module_exit(alsa_sound_exit)
+subsys_initcall(alsa_sound_init);
+module_exit(alsa_sound_exit);
diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c
index 7fe1226..0c164e5 100644
--- a/sound/core/sound_oss.c
+++ b/sound/core/sound_oss.c
@@ -93,7 +93,7 @@
default:
return -EINVAL;
}
- if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OSS_MINORS))
+ if (minor < 0 || minor >= SNDRV_OSS_MINORS)
return -EINVAL;
return minor;
}
diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c
index 751762f..0c40951 100644
--- a/sound/isa/sb/emu8000.c
+++ b/sound/isa/sb/emu8000.c
@@ -377,12 +377,13 @@
static void __devinit
size_dram(struct snd_emu8000 *emu)
{
- int i, size;
+ int i, size, detected_size;
if (emu->dram_checked)
return;
size = 0;
+ detected_size = 0;
/* write out a magic number */
snd_emu8000_dma_chan(emu, 0, EMU8000_RAM_WRITE);
@@ -393,6 +394,8 @@
while (size < EMU8000_MAX_DRAM) {
+ size += 512 * 1024; /* increment 512kbytes */
+
/* Write a unique data on the test address.
* if the address is out of range, the data is written on
* 0x200000(=EMU8000_DRAM_OFFSET). Then the id word is
@@ -414,7 +417,7 @@
if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2)
break; /* no memory at this address */
- size += 512 * 1024; /* increment 512kbytes */
+ detected_size = size;
snd_emu8000_read_wait(emu);
@@ -442,9 +445,9 @@
snd_emu8000_dma_chan(emu, 1, EMU8000_RAM_CLOSE);
snd_printdd("EMU8000 [0x%lx]: %d Kb on-board memory detected\n",
- emu->port1, size/1024);
+ emu->port1, detected_size/1024);
- emu->mem_size = size;
+ emu->mem_size = detected_size;
emu->dram_checked = 1;
}
diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c
index 08274c9..727bdb9 100644
--- a/sound/oss/dev_table.c
+++ b/sound/oss/dev_table.c
@@ -67,14 +67,15 @@
return -(EBUSY);
}
d = (struct audio_driver *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_driver)));
-
- if (sound_nblocks < 1024)
- sound_nblocks++;
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
- if (sound_nblocks < 1024)
- sound_nblocks++;
if (d == NULL || op == NULL) {
printk(KERN_ERR "Sound: Can't allocate driver for (%s)\n", name);
sound_unload_audiodev(num);
@@ -128,9 +129,10 @@
until you unload sound! */
op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+ sound_nblocks++;
+ if (sound_nblocks >= MAX_MEM_BLOCKS)
+ sound_nblocks = MAX_MEM_BLOCKS - 1;
- if (sound_nblocks < 1024)
- sound_nblocks++;
if (op == NULL) {
printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
return -ENOMEM;
diff --git a/sound/oss/sound_config.h b/sound/oss/sound_config.h
index 55271fb..9d35c4c 100644
--- a/sound/oss/sound_config.h
+++ b/sound/oss/sound_config.h
@@ -142,4 +142,6 @@
#define TIMER_ARMED 121234
#define TIMER_NOT_ARMED 1
+#define MAX_MEM_BLOCKS 1024
+
#endif
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 61aaeda..c625309 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -56,7 +56,7 @@
/*
* Table for permanently allocated memory (used when unloading the module)
*/
-void * sound_mem_blocks[1024];
+void * sound_mem_blocks[MAX_MEM_BLOCKS];
int sound_nblocks = 0;
/* Persistent DMA buffers */
@@ -574,7 +574,7 @@
NULL, "%s%d", dev_list[i].name, j);
}
- if (sound_nblocks >= 1024)
+ if (sound_nblocks >= MAX_MEM_BLOCKS - 1)
printk(KERN_ERR "Sound warning: Deallocation table was too small.\n");
return 0;
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index c119206..a7630e9 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -83,6 +83,7 @@
{ 0x4e534300, 0xffffff00, "National Semiconductor", NULL, NULL },
{ 0x50534300, 0xffffff00, "Philips", NULL, NULL },
{ 0x53494c00, 0xffffff00, "Silicon Laboratory", NULL, NULL },
+{ 0x53544d00, 0xffffff00, "STMicroelectronics", NULL, NULL },
{ 0x54524100, 0xffffff00, "TriTech", NULL, NULL },
{ 0x54584e00, 0xffffff00, "Texas Instruments", NULL, NULL },
{ 0x56494100, 0xffffff00, "VIA Technologies", NULL, NULL },
@@ -161,6 +162,7 @@
{ 0x4e534350, 0xffffffff, "LM4550", patch_lm4550, NULL }, // volume wrap fix
{ 0x50534304, 0xffffffff, "UCB1400", patch_ucb1400, NULL },
{ 0x53494c20, 0xffffffe0, "Si3036,8", mpatch_si3036, mpatch_si3036, AC97_MODEM_PATCH },
+{ 0x53544d02, 0xffffffff, "ST7597", NULL, NULL },
{ 0x54524102, 0xffffffff, "TR28022", NULL, NULL },
{ 0x54524103, 0xffffffff, "TR28023", NULL, NULL },
{ 0x54524106, 0xffffffff, "TR28026", NULL, NULL },
@@ -213,6 +215,14 @@
{
/* filter some registers for buggy codecs */
switch (ac97->id) {
+ case AC97_ID_ST_AC97_ID4:
+ if (reg == 0x08)
+ return 0;
+ /* fall through */
+ case AC97_ID_ST7597:
+ if (reg == 0x22 || reg == 0x7a)
+ return 1;
+ /* fall through */
case AC97_ID_AK4540:
case AC97_ID_AK4542:
if (reg <= 0x1c || reg == 0x20 || reg == 0x26 || reg >= 0x7c)
diff --git a/sound/pci/ac97/ac97_id.h b/sound/pci/ac97/ac97_id.h
index c129492..d603147 100644
--- a/sound/pci/ac97/ac97_id.h
+++ b/sound/pci/ac97/ac97_id.h
@@ -62,3 +62,5 @@
#define AC97_ID_CM9761_78 0x434d4978
#define AC97_ID_CM9761_82 0x434d4982
#define AC97_ID_CM9761_83 0x434d4983
+#define AC97_ID_ST7597 0x53544d02
+#define AC97_ID_ST_AC97_ID4 0x53544d04
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 139cf3b..d9266ba 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1870,6 +1870,7 @@
0x10140554, /* Thinkpad T42p/R50p */
0x10140567, /* Thinkpad T43p 2668-G7U */
0x10140581, /* Thinkpad X41-2527 */
+ 0x10280160, /* Dell Dimension 2400 */
0x104380b0, /* Asus A7V8X-MX */
0x11790241, /* Toshiba Satellite A-15 S127 */
0x144dc01a, /* Samsung NP-X20C004/SEG */
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index d6752df..42b4fbb 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -297,6 +297,7 @@
MODULE_DEVICE_TABLE(pci, snd_atiixp_ids);
static struct snd_pci_quirk atiixp_quirks[] __devinitdata = {
+ SND_PCI_QUIRK(0x105b, 0x0c81, "Foxconn RC4107MA-RS2", 0),
SND_PCI_QUIRK(0x15bd, 0x3100, "DFI RS482", 0),
{ } /* terminator */
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c746505..3f92def 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1230,6 +1230,8 @@
return; /* invalid entry */
}
}
+ if (!ext || !fixed)
+ return;
if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
return; /* no unsol support */
snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
@@ -4812,6 +4814,49 @@
spec->auto_mic = 0; /* disable auto-mic to be sure */
}
+/* choose the ADC/MUX containing the input pin and initialize the setup */
+static void fixup_single_adc(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+ int i;
+
+ /* search for the input pin; there must be only one */
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (spec->autocfg.input_pins[i]) {
+ pin = spec->autocfg.input_pins[i];
+ break;
+ }
+ }
+ if (!pin)
+ return;
+
+ /* set the default connection to that pin */
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ hda_nid_t cap = spec->capsrc_nids ?
+ spec->capsrc_nids[i] : spec->adc_nids[i];
+ int idx;
+
+ idx = get_connection_index(codec, cap, pin);
+ if (idx < 0)
+ continue;
+ /* use only this ADC */
+ if (spec->capsrc_nids)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
+ /* select or unmute this route */
+ if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
+ snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
+ HDA_AMP_MUTE, 0);
+ } else {
+ snd_hda_codec_write_cache(codec, cap, 0,
+ AC_VERB_SET_CONNECT_SEL, idx);
+ }
+ return;
+ }
+}
+
static void set_capture_mixer(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -4824,14 +4869,15 @@
alc_capture_mixer3 },
};
if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
- int mux;
- if (spec->auto_mic) {
- mux = 0;
+ int mux = 0;
+ if (spec->auto_mic)
fixup_automic_adc(codec);
- } else if (spec->input_mux && spec->input_mux->num_items > 1)
- mux = 1;
- else
- mux = 0;
+ else if (spec->input_mux) {
+ if (spec->input_mux->num_items > 1)
+ mux = 1;
+ else if (spec->input_mux->num_items == 1)
+ fixup_single_adc(codec);
+ }
spec->cap_mixer = caps[mux][spec->num_adc_nids - 1];
}
}
@@ -7094,8 +7140,8 @@
HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -7496,6 +7542,7 @@
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
@@ -7680,6 +7727,27 @@
spec->autocfg.speaker_pins[0] = 0x14;
}
+static void alc885_mb5_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+
+}
+
+static void alc885_mb5_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ /* Headphone insertion or removal. */
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc885_mb5_automute(codec);
+}
+
static void alc885_imac91_automute(struct hda_codec *codec)
{
unsigned int present;
@@ -9126,6 +9194,8 @@
.input_mux = &mb5_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc885_mb5_unsol_event,
+ .init_hook = alc885_mb5_automute,
},
[ALC885_MACPRO] = {
.mixers = { alc882_macpro_mixer },
@@ -11179,7 +11249,7 @@
}
#define alc262_auto_create_input_ctls \
- alc880_auto_create_input_ctls
+ alc882_auto_create_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
@@ -14855,6 +14925,8 @@
spec->stream_digital_playback = &alc861_pcm_digital_playback;
spec->stream_digital_capture = &alc861_pcm_digital_capture;
+ if (!spec->cap_mixer)
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
spec->vmaster_nid = 0x03;
@@ -15493,7 +15565,7 @@
static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x22, 0);
}
@@ -17251,7 +17323,7 @@
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
+ SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 2291a83..799ba25 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4730,6 +4730,26 @@
}
}
+static int hp_blike_system(u32 subsystem_id);
+
+static void set_hp_led_gpio(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ switch (codec->vendor_id) {
+ case 0x111d7608:
+ /* GPIO 0 */
+ spec->gpio_led = 0x01;
+ break;
+ case 0x111d7600:
+ case 0x111d7601:
+ case 0x111d7602:
+ case 0x111d7603:
+ /* GPIO 3 */
+ spec->gpio_led = 0x08;
+ break;
+ }
+}
+
/*
* This method searches for the mute LED GPIO configuration
* provided as OEM string in SMBIOS. The format of that string
@@ -4741,6 +4761,14 @@
*
* So, HP B-series like systems may have HP_Mute_LED_0 (current models)
* or HP_Mute_LED_0_3 (future models) OEM SMBIOS strings
+ *
+ *
+ * The dv-series laptops don't seem to have the HP_Mute_LED* strings in
+ * SMBIOS - at least the ones I have seen do not have them - which include
+ * my own system (HP Pavilion dv6-1110ax) and my cousin's
+ * HP Pavilion dv9500t CTO.
+ * Need more information on whether it is true across the entire series.
+ * -- kunal
*/
static int find_mute_led_gpio(struct hda_codec *codec)
{
@@ -4751,28 +4779,27 @@
while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
NULL, dev))) {
if (sscanf(dev->name, "HP_Mute_LED_%d_%d",
- &spec->gpio_led_polarity,
- &spec->gpio_led) == 2) {
+ &spec->gpio_led_polarity,
+ &spec->gpio_led) == 2) {
spec->gpio_led = 1 << spec->gpio_led;
return 1;
}
if (sscanf(dev->name, "HP_Mute_LED_%d",
- &spec->gpio_led_polarity) == 1) {
- switch (codec->vendor_id) {
- case 0x111d7608:
- /* GPIO 0 */
- spec->gpio_led = 0x01;
- return 1;
- case 0x111d7600:
- case 0x111d7601:
- case 0x111d7602:
- case 0x111d7603:
- /* GPIO 3 */
- spec->gpio_led = 0x08;
- return 1;
- }
+ &spec->gpio_led_polarity) == 1) {
+ set_hp_led_gpio(codec);
+ return 1;
}
}
+
+ /*
+ * Fallback case - if we don't find the DMI strings,
+ * we statically set the GPIO - if not a B-series system.
+ */
+ if (!hp_blike_system(codec->subsystem_id)) {
+ set_hp_led_gpio(codec);
+ spec->gpio_led_polarity = 1;
+ return 1;
+ }
}
return 0;
}
@@ -5548,6 +5575,8 @@
spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
+ snd_printdd("Found board config: %d\n", spec->board_config);
+
switch (spec->board_config) {
case STAC_HP_M4:
/* enable internal microphone */
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index b5ca02e..e66ef2b 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -1058,7 +1058,7 @@
rptr.retwords[2] != M &&
rptr.retwords[3] != N &&
i++ < MAX_WRITE_RETRY);
- if (i == MAX_WRITE_RETRY) {
+ if (i > MAX_WRITE_RETRY) {
snd_printdd("sent samplerate %d: %d failed\n",
*intdec, rate);
return -EIO;
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index ebbf11b..718ef91 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -925,7 +925,7 @@
iface |= 0x3 << 8;
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x3 << 8; /* lg not sure which mode */
+ iface |= 0x3 << 8 | WM8350_AIF_LRCLK_INV;
break;
default:
return -EINVAL;
diff --git a/sound/sound_core.c b/sound/sound_core.c
index dbca7c9..7c2d677 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -61,7 +61,7 @@
class_destroy(sound_class);
}
-module_init(init_soundcore);
+subsys_initcall(init_soundcore);
module_exit(cleanup_soundcore);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 4963def..9edef46 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -1936,7 +1936,7 @@
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
- if (subs->interface >= 0) {
+ if (!as->chip->shutdown && subs->interface >= 0) {
usb_set_interface(subs->dev, subs->interface, 0);
subs->interface = -1;
}
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 652a470..2e7fa3a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -250,7 +250,19 @@
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(V), 2)
+ QUIET_STDERR = ">/dev/null"
+else
+ QUIET_STDERR = ">/dev/null 2>&1"
+endif
+
+BITBUCKET = "/dev/null"
+
+ifneq ($(shell sh -c "(echo '\#include <stdio.h>'; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
+ BITBUCKET = .perf.dev.null
+endif
+
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
@@ -451,11 +463,6 @@
PERFLIBS = $(LIB_FILE)
-ifeq ($(V), 2)
- QUIET_STDERR = ">/dev/null"
-else
- QUIET_STDERR = ">/dev/null 2>&1"
-endif
#
# Platform specific tweaks
#
@@ -483,19 +490,19 @@
PTHREAD_LIBS =
endif
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
- ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
BASIC_CFLAGS += -DLIBELF_NO_MMAP
endif
else
msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
-ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
BASIC_CFLAGS += -DNO_LIBDWARF
else
@@ -509,7 +516,7 @@
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
endif
-ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
BASIC_CFLAGS += -DNO_LIBPERL
else
ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
@@ -519,20 +526,20 @@
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd),y)
EXTLIBS += -lbfd
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty),y)
EXTLIBS += -lbfd -liberty
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty_z),y)
EXTLIBS += -lbfd -liberty -lz
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_cplus_demangle),y)
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
@@ -780,7 +787,7 @@
SHELL = $(SHELL_PATH)
-all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
+all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
ifneq (,$X)
$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
endif
@@ -1107,6 +1114,11 @@
.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
.PHONY: .FORCE-PERF-BUILD-OPTIONS
+.perf.dev.null:
+ touch .perf.dev.null
+
+.INTERMEDIATE: .perf.dev.null
+
### Make sure built-ins do not have dups and listed in perf.c
#
check-builtins::
diff --git a/usr/Kconfig b/usr/Kconfig
index 1c3039f..e2721f5 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -72,6 +72,15 @@
Support loading of a LZMA encoded initial ramdisk or cpio buffer
If unsure, say N.
+config RD_LZO
+ bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ default !EMBEDDED
+ depends on BLK_DEV_INITRD
+ select DECOMPRESS_LZO
+ help
+ Support loading of a LZO encoded initial ramdisk or cpio buffer
+ If unsure, say N.
+
choice
prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
help
@@ -108,16 +117,15 @@
bool "Gzip"
depends on RD_GZIP
help
- The old and tried gzip compression. Its compression ratio is
- the poorest among the 3 choices; however its speed (both
- compression and decompression) is the fastest.
+ The old and tried gzip compression. It provides a good balance
+ between compression ratio and decompression speed.
config INITRAMFS_COMPRESSION_BZIP2
bool "Bzip2"
depends on RD_BZIP2
help
Its compression ratio and speed is intermediate.
- Decompression speed is slowest among the three. The initramfs
+ Decompression speed is slowest among the four. The initramfs
size is about 10% smaller with bzip2, in comparison to gzip.
Bzip2 uses a large amount of memory. For modern kernels you
will need at least 8MB RAM or more for booting.
@@ -128,7 +136,15 @@
help
The most recent compression algorithm.
Its ratio is best, decompression speed is between the other
- two. Compression is slowest. The initramfs size is about 33%
+ three. Compression is slowest. The initramfs size is about 33%
smaller with LZMA in comparison to gzip.
+config INITRAMFS_COMPRESSION_LZO
+ bool "LZO"
+ depends on RD_LZO
+ help
+ Its compression ratio is the poorest among the four. The kernel
+ size is about about 10% bigger than gzip; however its speed
+ (both compression and decompression) is the fastest.
+
endchoice