drm/exynos: fixed pm feature for fimd module.
this patch separates fimd specific power on/off function from pm function
and the pm interfaces will call that function for power on or off.
and also removes unnecessary codes of resume function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index ca83139..b6a737d 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -158,7 +158,8 @@
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
- pm_runtime_put_sync(subdrv_dev);
+ if (!ctx->suspended)
+ pm_runtime_put_sync(subdrv_dev);
break;
default:
DRM_DEBUG_KMS("unspecified mode %d\n", mode);
@@ -734,6 +735,46 @@
writel(val, ctx->regs + SHADOWCON);
}
+static int fimd_power_on(struct fimd_context *ctx, bool enable)
+{
+ struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+ struct device *dev = subdrv->manager.dev;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ if (enable != false && enable != true)
+ return -EINVAL;
+
+ if (enable) {
+ int ret;
+
+ ret = clk_enable(ctx->bus_clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(ctx->lcd_clk);
+ if (ret < 0) {
+ clk_disable(ctx->bus_clk);
+ return ret;
+ }
+
+ ctx->suspended = false;
+
+ /* if vblank was enabled status, enable it again. */
+ if (test_and_clear_bit(0, &ctx->irq_flags))
+ fimd_enable_vblank(dev);
+
+ fimd_apply(dev);
+ } else {
+ clk_disable(ctx->lcd_clk);
+ clk_disable(ctx->bus_clk);
+
+ ctx->suspended = true;
+ }
+
+ return 0;
+}
+
static int __devinit fimd_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -911,39 +952,30 @@
#ifdef CONFIG_PM_SLEEP
static int fimd_suspend(struct device *dev)
{
- int ret;
+ struct fimd_context *ctx = get_fimd_context(dev);
if (pm_runtime_suspended(dev))
return 0;
- ret = pm_runtime_suspend(dev);
- if (ret < 0)
- return ret;
-
- return 0;
+ /*
+ * do not use pm_runtime_suspend(). if pm_runtime_suspend() is
+ * called here, an error would be returned by that interface
+ * because the usage_count of pm runtime is more than 1.
+ */
+ return fimd_power_on(ctx, false);
}
static int fimd_resume(struct device *dev)
{
- int ret;
+ struct fimd_context *ctx = get_fimd_context(dev);
- ret = pm_runtime_resume(dev);
- if (ret < 0) {
- DRM_ERROR("failed to resume runtime pm.\n");
- return ret;
- }
-
- pm_runtime_disable(dev);
-
- ret = pm_runtime_set_active(dev);
- if (ret < 0) {
- DRM_ERROR("failed to active runtime pm.\n");
- pm_runtime_enable(dev);
- pm_runtime_suspend(dev);
- return ret;
- }
-
- pm_runtime_enable(dev);
+ /*
+ * if entered to sleep when lcd panel was on, the usage_count
+ * of pm runtime would still be 1 so in this case, fimd driver
+ * should be on directly not drawing on pm runtime interface.
+ */
+ if (!pm_runtime_suspended(dev))
+ return fimd_power_on(ctx, true);
return 0;
}
@@ -956,39 +988,16 @@
DRM_DEBUG_KMS("%s\n", __FILE__);
- clk_disable(ctx->lcd_clk);
- clk_disable(ctx->bus_clk);
-
- ctx->suspended = true;
- return 0;
+ return fimd_power_on(ctx, false);
}
static int fimd_runtime_resume(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
- int ret;
DRM_DEBUG_KMS("%s\n", __FILE__);
- ret = clk_enable(ctx->bus_clk);
- if (ret < 0)
- return ret;
-
- ret = clk_enable(ctx->lcd_clk);
- if (ret < 0) {
- clk_disable(ctx->bus_clk);
- return ret;
- }
-
- ctx->suspended = false;
-
- /* if vblank was enabled status, enable it again. */
- if (test_and_clear_bit(0, &ctx->irq_flags))
- fimd_enable_vblank(dev);
-
- fimd_apply(dev);
-
- return 0;
+ return fimd_power_on(ctx, true);
}
#endif