Merge commit 'v2.6.38-rc6' into devicetree/next

Conflicts:
	drivers/spi/pxa2xx_spi_pci.c
diff --git a/Documentation/devicetree/bindings/serio/altera_ps2.txt b/Documentation/devicetree/bindings/serio/altera_ps2.txt
new file mode 100644
index 0000000..4d9eecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/altera_ps2.txt
@@ -0,0 +1,4 @@
+Altera UP PS/2 controller
+
+Required properties:
+- compatible : should be "ALTR,ps2-1.0".
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0c68764..1071766 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -104,11 +104,22 @@
 	int global_number;	/* PCI domain number */
 };
 
+#ifdef CONFIG_PCI
 static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 {
 	return bus->sysdata;
 }
 
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	struct pci_controller *host;
+
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	host = pci_bus_to_host(bus);
+	return host ? host->dn : NULL;
+}
+
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it
@@ -116,6 +127,7 @@
 	 */
 	return 0;
 }
+#endif /* CONFIG_PCI */
 
 /* These are used for config access before all the PCI probing
    has been done. */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 2e72af0..d0890d3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -64,21 +64,6 @@
 /* CPU OF node matching */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 9ae24f4..47187cc 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -2,88 +2,11 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/pci_regs.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
 #include <linux/of_address.h>
 #include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	u32 laddr[3];
-	u8 pin;
-	int rc;
-
-	/* Check if we have a device node, if yes, fallback to standard OF
-	 * parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn)
-		return of_irq_map_one(dn, 0, out_irq);
-
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
-	 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-			struct pci_controller *host;
-			host = pci_bus_to_host(pdev->bus);
-			ppnode = host ? host->dn : NULL;
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't
-		 * include the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
-
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
-		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
-	}
-
-	laddr[0] = (pdev->bus->number << 16)
-		| (pdev->devfn << 8);
-	laddr[1]  = laddr[2] = 0;
-	return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
 
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index e363615..1e01a12 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c
index 3c3d808..92728a6 100644
--- a/arch/microblaze/pci/pci_32.c
+++ b/arch/microblaze/pci/pci_32.c
@@ -332,6 +332,7 @@
 		       hose->global_number);
 		return;
 	}
+	bus.dev->of_node = of_node_get(node);
 	bus->secondary = hose->first_busno;
 	hose->bus = bus;
 
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 51e9e6f..5e156e0 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -164,13 +164,23 @@
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
 
-#ifndef CONFIG_PPC64
-
 static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 {
 	return bus->sysdata;
 }
 
+#ifndef CONFIG_PPC64
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	struct pci_controller *host;
+
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	host = pci_bus_to_host(bus);
+	return host ? host->dn : NULL;
+}
+
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it
@@ -218,19 +228,10 @@
 
 /* Get a device_node from a pci_dev.  This code must be fast except
  * in the case where the sysdata is incorrect and needs to be fixed
- * up (this will only happen once).
- * In this case the sysdata will have been inherited from a PCI host
- * bridge or a PCI-PCI bridge further up the tree, so it will point
- * to a valid struct pci_dn, just not the one we want.
- */
+ * up (this will only happen once). */
 static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
 {
-	struct device_node *dn = dev->sysdata;
-	struct pci_dn *pdn = dn->data;
-
-	if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
-		return dn;	/* fast path.  sysdata is good */
-	return fetch_dev_dn(dev);
+	return dev->dev.of_node ? dev->dev.of_node : fetch_dev_dn(dev);
 }
 
 static inline int pci_device_from_OF_node(struct device_node *np,
@@ -248,7 +249,7 @@
 	if (bus->self)
 		return pci_device_to_OF_node(bus->self);
 	else
-		return bus->sysdata; /* Must be root bus (PHB) */
+		return bus->dev.of_node; /* Must be root bus (PHB) */
 }
 
 /** Find the bus corresponding to the indicated device node */
@@ -260,14 +261,6 @@
 /** Discover new pci devices under this bus, and add them */
 extern void pcibios_add_pci_devices(struct pci_bus *bus);
 
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	struct device_node *busdn = bus->sysdata;
-
-	BUG_ON(busdn == NULL);
-	return PCI_DN(busdn)->phb;
-}
-
 
 extern void isa_bridge_find_early(struct pci_controller *hose);
 
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a20a9ad..7d77909 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -201,7 +201,7 @@
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
 extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
-extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata);
+extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index d727575..c189aa5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -70,21 +70,6 @@
 #endif
 #define of_node_to_nid of_node_to_nid
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
 extern void of_instantiate_rtc(void);
 
 /* These includes are put at the bottom because they may contain things
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b2c363e..9bd951c 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -74,7 +74,7 @@
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	pcibios_scan_phb(phb, dev->dev.of_node);
+	pcibios_scan_phb(phb);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 10a44e6..3cd85fa 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/syscalls.h>
@@ -1687,13 +1688,8 @@
 /**
  * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
  * @hose: Pointer to the PCI host controller instance structure
- * @sysdata: value to use for sysdata pointer.  ppc32 and ppc64 differ here
- *
- * Note: the 'data' pointer is a temporary measure.  As 32 and 64 bit
- * pci code gets merged, this parameter should become unnecessary because
- * both will use the same value.
  */
-void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+void __devinit pcibios_scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
 	struct device_node *node = hose->dn;
@@ -1703,13 +1699,13 @@
 		 node ? node->full_name : "<NO NAME>");
 
 	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
-			     sysdata);
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
 	if (bus == NULL) {
 		pr_err("Failed to create bus for PCI domain %04x\n",
 			hose->global_number);
 		return;
 	}
+	bus->dev.of_node = of_node_get(node);
 	bus->secondary = hose->first_busno;
 	hose->bus = bus;
 
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index e7db5b4..bedb370 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -381,7 +381,7 @@
 		if (pci_assign_all_buses)
 			hose->first_busno = next_busno;
 		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose, hose);
+		pcibios_scan_phb(hose);
 		pci_bus_add_devices(hose->bus);
 		if (pci_assign_all_buses || next_busno <= hose->last_busno)
 			next_busno = hose->last_busno + pcibios_assign_bus_offset;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 8515776..fc6452b 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@
 
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		pcibios_scan_phb(hose, hose->dn);
+		pcibios_scan_phb(hose);
 		pci_bus_add_devices(hose->bus);
 	}
 
@@ -242,10 +242,10 @@
 			break;
 		bus = NULL;
 	}
-	if (bus == NULL || bus->sysdata == NULL)
+	if (bus == NULL || bus->dev.of_node == NULL)
 		return -ENODEV;
 
-	hose_node = (struct device_node *)bus->sysdata;
+	hose_node = bus->dev.of_node;
 	hose = PCI_DN(hose_node)->phb;
 
 	switch (which) {
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d56b35e..2985268 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -161,7 +161,7 @@
 /*
  * This is the "slow" path for looking up a device_node from a
  * pci_dev.  It will hunt for the device under its parent's
- * phb and then update sysdata for a future fastpath.
+ * phb and then update of_node pointer.
  *
  * It may also do fixups on the actual device since this happens
  * on the first read/write.
@@ -170,16 +170,19 @@
  * In this case it may probe for real hardware ("just in case")
  * and add a device_node to the device tree if necessary.
  *
+ * Is this function necessary anymore now that dev->dev.of_node is
+ * used to store the node pointer?
+ *
  */
 struct device_node *fetch_dev_dn(struct pci_dev *dev)
 {
-	struct device_node *orig_dn = dev->sysdata;
+	struct device_node *orig_dn = dev->dev.of_node;
 	struct device_node *dn;
 	unsigned long searchval = (dev->bus->number << 8) | dev->devfn;
 
 	dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval);
 	if (dn)
-		dev->sysdata = dn;
+		dev->dev.of_node = dn;
 	return dn;
 }
 EXPORT_SYMBOL(fetch_dev_dn);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index e751506..1e89a72 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -135,7 +135,7 @@
 	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
 
 	dev->bus = bus;
-	dev->sysdata = node;
+	dev->dev.of_node = of_node_get(node);
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
@@ -238,7 +238,7 @@
 	bus->primary = dev->bus->number;
 	bus->subordinate = busrange[1];
 	bus->bridge_ctl = 0;
-	bus->sysdata = node;
+	bus->dev.of_node = of_node_get(node);
 
 	/* parse ranges property */
 	/* PCI #address-cells == 3 and #size-cells == 2 always */
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index c2b7a07..47187cc 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,95 +2,11 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/pci_regs.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
 #include <linux/of_address.h>
 #include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	u32 laddr[3];
-	u8 pin;
-	int rc;
-
-	/* Check if we have a device node, if yes, fallback to standard OF
-	 * parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn) {
-		rc = of_irq_map_one(dn, 0, out_irq);
-		if (!rc)
-			return rc;
-	}
-
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
-	 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
-			ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
-			struct pci_controller *host;
-			host = pci_bus_to_host(pdev->bus);
-			ppnode = host ? host->dn : NULL;
-#endif
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't include
-		 * the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
-
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
-		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
-	}
-
-	laddr[0] = (pdev->bus->number << 16)
-		| (pdev->devfn << 8);
-	laddr[1]  = laddr[2] = 0;
-	return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
 
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5fcc92a..3bf4488 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -149,7 +149,7 @@
 	if (dn->child)
 		eeh_add_device_tree_early(dn);
 
-	pcibios_scan_phb(phb, dn);
+	pcibios_scan_phb(phb);
 	pcibios_finish_adding_to_bus(phb->bus);
 
 	return phb;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index ef3bcb1..c2ef5ce 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -330,9 +330,7 @@
 	i2c->adap = ocores_adapter;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
 	i2c->adap.dev.of_node = pdev->dev.of_node;
-#endif
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
@@ -390,15 +388,11 @@
 #define ocores_i2c_resume	NULL
 #endif
 
-#ifdef CONFIG_OF
 static struct of_device_id ocores_i2c_match[] = {
-        {
-                .compatible = "opencores,i2c-ocores",
-        },
-        {},
+	{ .compatible = "opencores,i2c-ocores", },
+	{},
 };
 MODULE_DEVICE_TABLE(of, ocores_i2c_match);
-#endif
 
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ocores-i2c");
@@ -411,9 +405,7 @@
 	.driver  = {
 		.owner = THIS_MODULE,
 		.name = "ocores-i2c",
-#ifdef CONFIG_OF
-                .of_match_table = ocores_i2c_match,
-#endif
+		.of_match_table = ocores_i2c_match,
 	},
 };
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f0bd5bc..045ba6e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -537,9 +537,7 @@
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
-#ifdef CONFIG_OF
 	client->dev.of_node = info->of_node;
-#endif
 
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
 		     client->addr);
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
index 7998560..d363dc4 100644
--- a/drivers/input/serio/altera_ps2.c
+++ b/drivers/input/serio/altera_ps2.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #define DRV_NAME "altera_ps2"
 
@@ -173,6 +174,16 @@
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id altera_ps2_match[] = {
+	{ .compatible = "ALTR,ps2-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_ps2_match);
+#else /* CONFIG_OF */
+#define altera_ps2_match NULL
+#endif /* CONFIG_OF */
+
 /*
  * Our device driver structure
  */
@@ -182,6 +193,7 @@
 	.driver	= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = altera_ps2_match,
 	},
 };
 
@@ -189,13 +201,12 @@
 {
 	return platform_driver_register(&altera_ps2_driver);
 }
+module_init(altera_ps2_init);
 
 static void __exit altera_ps2_exit(void)
 {
 	platform_driver_unregister(&altera_ps2_driver);
 }
-
-module_init(altera_ps2_init);
 module_exit(altera_ps2_exit);
 
 MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index fd877f6..2f7fc0c 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1516,21 +1516,17 @@
 	return 0;
 }
 
-#if defined(CONFIG_OF)
 static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
 	{ .compatible = "mmc-spi-slot", },
 	{},
 };
-#endif
 
 static struct spi_driver mmc_spi_driver = {
 	.driver = {
 		.name =		"mmc_spi",
 		.bus =		&spi_bus_type,
 		.owner =	THIS_MODULE,
-#if defined(CONFIG_OF)
 		.of_match_table = mmc_spi_of_match_table,
-#endif
 	},
 	.probe =	mmc_spi_probe,
 	.remove =	__devexit_p(mmc_spi_remove),
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b79d7e1..db0290f 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -1163,15 +1163,11 @@
 # define ethoc_resume  NULL
 #endif
 
-#ifdef CONFIG_OF
 static struct of_device_id ethoc_match[] = {
-	{
-		.compatible = "opencores,ethoc",
-	},
+	{ .compatible = "opencores,ethoc", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ethoc_match);
-#endif
 
 static struct platform_driver ethoc_driver = {
 	.probe   = ethoc_probe,
@@ -1181,9 +1177,7 @@
 	.driver  = {
 		.name = "ethoc",
 		.owner = THIS_MODULE,
-#ifdef CONFIG_OF
 		.of_match_table = ethoc_match,
-#endif
 	},
 };
 
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3c6e100..efabbf9 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -69,4 +69,10 @@
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config OF_PCI
+	def_tristate PCI
+	depends on PCI && (PPC || MICROBLAZE)
+	help
+	  OpenFirmware PCI bus accessors
+
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 3ab21a0..f7861ed 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_OF_PCI)	+= of_pci.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
new file mode 100644
index 0000000..314535f
--- /dev/null
+++ b/drivers/of/of_pci.c
@@ -0,0 +1,91 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <asm/prom.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:       the device whose interrupt is to be resolved
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+	struct device_node *dn, *ppnode;
+	struct pci_dev *ppdev;
+	u32 lspec;
+	__be32 lspec_be;
+	__be32 laddr[3];
+	u8 pin;
+	int rc;
+
+	/* Check if we have a device node, if yes, fallback to standard
+	 * device tree parsing
+	 */
+	dn = pci_device_to_OF_node(pdev);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
+
+	/* Ok, we don't, time to have fun. Let's start by building up an
+	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+	 * for PCI. If you do different, then don't use that routine.
+	 */
+	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+	if (rc != 0)
+		return rc;
+	/* No pin, exit */
+	if (pin == 0)
+		return -ENODEV;
+
+	/* Now we walk up the PCI tree */
+	lspec = pin;
+	for (;;) {
+		/* Get the pci_dev of our parent */
+		ppdev = pdev->bus->self;
+
+		/* Ouch, it's a host bridge... */
+		if (ppdev == NULL) {
+			ppnode = pci_bus_to_OF_node(pdev->bus);
+
+			/* No node for host bridge ? give up */
+			if (ppnode == NULL)
+				return -EINVAL;
+		} else {
+			/* We found a P2P bridge, check if it has a node */
+			ppnode = pci_device_to_OF_node(ppdev);
+		}
+
+		/* Ok, we have found a parent with a device-node, hand over to
+		 * the OF parsing code.
+		 * We build a unit address from the linux device to be used for
+		 * resolution. Note that we use the linux bus number which may
+		 * not match your firmware bus numbering.
+		 * Fortunately, in most cases, interrupt-map-mask doesn't
+		 * include the bus number as part of the matching.
+		 * You should still be careful about that though if you intend
+		 * to rely on this function (you ship  a firmware that doesn't
+		 * create device nodes for all PCI devices).
+		 */
+		if (ppnode)
+			break;
+
+		/* We can only get here if we hit a P2P bridge with no node,
+		 * let's do standard swizzling and try again
+		 */
+		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+		pdev = ppdev;
+	}
+
+	lspec_be = cpu_to_be32(lspec);
+	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+	laddr[1]  = laddr[2] = cpu_to_be32(0);
+	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 9592883..a429b01 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1557,9 +1557,7 @@
 	drv_data->ssp = ssp;
 
 	master->dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
 	master->dev.of_node = pdev->dev.of_node;
-#endif
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
index 19752b0..378e504 100644
--- a/drivers/spi/pxa2xx_spi_pci.c
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -89,9 +89,7 @@
 		goto err_nomem;
 
 	pdev->dev.parent = &dev->dev;
-#ifdef CONFIG_OF
 	pdev->dev.of_node = dev->dev.of_node;
-#endif
 	ssp = &spi_info->ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
 	ssp->mmio_base = ioremap(phys_beg, phys_len);
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 7adaef6..4d2c75d 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -351,14 +351,12 @@
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id xilinx_spi_of_match[] = {
 	{ .compatible = "xlnx,xps-spi-2.00.a", },
 	{ .compatible = "xlnx,xps-spi-2.00.b", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-#endif
 
 struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 	u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
@@ -394,9 +392,7 @@
 
 	master->bus_num = bus_num;
 	master->num_chipselect = num_cs;
-#ifdef CONFIG_OF
 	master->dev.of_node = dev->of_node;
-#endif
 
 	xspi->mem = *mem;
 	xspi->irq = irq;
@@ -539,9 +535,7 @@
 	.driver = {
 		.name = XILINX_SPI_NAME,
 		.owner = THIS_MODULE,
-#ifdef CONFIG_OF
 		.of_match_table = xilinx_spi_of_match,
-#endif
 	},
 };
 
diff --git a/include/linux/device.h b/include/linux/device.h
index 1bf5cf0..ca5d252 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -128,9 +128,7 @@
 
 	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
 
-#if defined(CONFIG_OF)
 	const struct of_device_id	*of_match_table;
-#endif
 
 	int (*probe) (struct device *dev);
 	int (*remove) (struct device *dev);
@@ -441,9 +439,8 @@
 					     override */
 	/* arch specific additions */
 	struct dev_archdata	archdata;
-#ifdef CONFIG_OF
-	struct device_node	*of_node;
-#endif
+
+	struct device_node	*of_node; /* associated device tree node */
 
 	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 903576d..06a8d9c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -258,9 +258,7 @@
 	unsigned short	addr;
 	void		*platform_data;
 	struct dev_archdata	*archdata;
-#ifdef CONFIG_OF
 	struct device_node *of_node;
-#endif
 	int		irq;
 };
 
diff --git a/include/linux/of.h b/include/linux/of.h
index cad7cf0..d9dd664 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -23,8 +23,6 @@
 
 #include <asm/byteorder.h>
 
-#ifdef CONFIG_OF
-
 typedef u32 phandle;
 typedef u32 ihandle;
 
@@ -65,6 +63,8 @@
 #endif
 };
 
+#ifdef CONFIG_OF
+
 /* Pointer for first entry in chain of all nodes. */
 extern struct device_node *allnodes;
 extern struct device_node *of_chosen;
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
new file mode 100644
index 0000000..85a27b6
--- /dev/null
+++ b/include/linux/of_pci.h
@@ -0,0 +1,9 @@
+#ifndef __OF_PCI_H
+#define __OF_PCI_H
+
+#include <linux/pci.h>
+
+struct pci_dev;
+struct of_irq;
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+#endif