msm: 8930: Create separate board files for MSM8930
Create dedicated board files for MSM8930 targets, and move
the MSM8930 machine records and init code there. These
files are largely based on the MSM8960 board files.
Change-Id: I7de17856cb9950e98c349d38ddd87ba6109b6d23
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm8930.h b/arch/arm/mach-msm/board-msm8930.h
new file mode 100644
index 0000000..54fa56a
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8930.h
@@ -0,0 +1,80 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_MSM8930_H
+#define __ARCH_ARM_MACH_MSM_BOARD_MSM8930_H
+
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/mfd/pm8xxx/pm8921.h>
+#include <linux/i2c/sx150x.h>
+#include <mach/irqs.h>
+#include <mach/rpm-regulator.h>
+
+/* Macros assume PMIC GPIOs and MPPs start at 1 */
+#define PM8921_GPIO_BASE NR_GPIO_IRQS
+#define PM8921_GPIO_PM_TO_SYS(pm_gpio) (pm_gpio - 1 + PM8921_GPIO_BASE)
+#define PM8921_MPP_BASE (PM8921_GPIO_BASE + PM8921_NR_GPIOS)
+#define PM8921_MPP_PM_TO_SYS(pm_gpio) (pm_gpio - 1 + PM8921_MPP_BASE)
+#define PM8921_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS)
+
+extern struct pm8921_regulator_platform_data
+ msm_pm8921_regulator_pdata[] __devinitdata;
+
+extern int msm_pm8921_regulator_pdata_len __devinitdata;
+
+#define GPIO_VREG_ID_EXT_5V 0
+#define GPIO_VREG_ID_EXT_L2 1
+#define GPIO_VREG_ID_EXT_3P3V 2
+
+extern struct gpio_regulator_platform_data
+ msm_gpio_regulator_pdata[] __devinitdata;
+
+extern struct regulator_init_data msm_saw_regulator_pdata_s5;
+extern struct regulator_init_data msm_saw_regulator_pdata_s6;
+
+extern struct rpm_regulator_platform_data msm_rpm_regulator_pdata __devinitdata;
+
+#if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE)
+enum {
+ GPIO_EXPANDER_IRQ_BASE = (PM8921_IRQ_BASE + PM8921_NR_IRQS),
+ GPIO_EXPANDER_GPIO_BASE = (PM8921_MPP_BASE + PM8921_NR_MPPS),
+ /* CAM Expander */
+ GPIO_CAM_EXPANDER_BASE = GPIO_EXPANDER_GPIO_BASE,
+ GPIO_CAM_GP_STROBE_READY = GPIO_CAM_EXPANDER_BASE,
+ GPIO_CAM_GP_AFBUSY,
+ GPIO_CAM_GP_STROBE_CE,
+ GPIO_CAM_GP_CAM1MP_XCLR,
+ GPIO_CAM_GP_CAMIF_RESET_N,
+ GPIO_CAM_GP_XMT_FLASH_INT,
+ GPIO_CAM_GP_LED_EN1,
+ GPIO_CAM_GP_LED_EN2,
+
+};
+#endif
+
+enum {
+ SX150X_CAM,
+};
+
+#endif
+
+extern struct sx150x_platform_data msm8930_sx150x_data[];
+void msm8930_init_cam(void);
+void msm8930_init_fb(void);
+void msm8930_init_pmic(void);
+void msm8930_init_mmc(void);
+void msm8930_allocate_fb_region(void);
+void msm8930_pm8921_gpio_mpp_init(void);
+
+#define MSM_8930_GSBI4_QUP_I2C_BUS_ID 4
+#define MSM_8930_GSBI3_QUP_I2C_BUS_ID 3
+#define MSM_8930_GSBI10_QUP_I2C_BUS_ID 10