arch/tile: improve support for PCI hotplug
Note that this is not complete hot-plug support; hot-unplug is not included.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index e32b0c2..635e1bf 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -339,6 +339,14 @@
source "drivers/pci/Kconfig"
+config HOTPLUG
+ bool "Support for hot-pluggable devices"
+ ---help---
+ Say Y here if you want to plug devices into your computer while
+ the system is running, and be able to use them quickly. In many
+ cases, the devices can likewise be unplugged at any time too.
+ One well-known example of this is USB.
+
source "drivers/pci/hotplug/Kconfig"
endmenu
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index c3fc458..7f03cef 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -46,7 +46,8 @@
*/
#define PCI_DMA_BUS_IS_PHYS 1
-int __init tile_pci_init(void);
+int __devinit tile_pci_init(void);
+int __devinit pcibios_init(void);
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index ea38f0c..65add02 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -59,6 +59,7 @@
static struct pci_controller controllers[TILE_NUM_PCIE];
static int num_controllers;
+static int pci_scan_flags[TILE_NUM_PCIE];
static struct pci_ops tile_cfg_ops;
@@ -79,7 +80,7 @@
* controller_id is the controller number, config type is 0 or 1 for
* config0 or config1 operations.
*/
-static int __init tile_pcie_open(int controller_id, int config_type)
+static int __devinit tile_pcie_open(int controller_id, int config_type)
{
char filename[32];
int fd;
@@ -95,7 +96,7 @@
/*
* Get the IRQ numbers from the HV and set up the handlers for them.
*/
-static int __init tile_init_irqs(int controller_id,
+static int __devinit tile_init_irqs(int controller_id,
struct pci_controller *controller)
{
char filename[32];
@@ -139,71 +140,80 @@
*
* Returns the number of controllers discovered.
*/
-int __init tile_pci_init(void)
+int __devinit tile_pci_init(void)
{
int i;
pr_info("PCI: Searching for controllers...\n");
+ /* Re-init number of PCIe controllers to support hot-plug feature. */
+ num_controllers = 0;
+
/* Do any configuration we need before using the PCIe */
for (i = 0; i < TILE_NUM_PCIE; i++) {
- int hv_cfg_fd0 = -1;
- int hv_cfg_fd1 = -1;
- int hv_mem_fd = -1;
- char name[32];
- struct pci_controller *controller;
-
/*
- * Open the fd to the HV. If it fails then this
- * device doesn't exist.
+ * To see whether we need a real config op based on
+ * the results of pcibios_init(), to support PCIe hot-plug.
*/
- hv_cfg_fd0 = tile_pcie_open(i, 0);
- if (hv_cfg_fd0 < 0)
+ if (pci_scan_flags[i] == 0) {
+ int hv_cfg_fd0 = -1;
+ int hv_cfg_fd1 = -1;
+ int hv_mem_fd = -1;
+ char name[32];
+ struct pci_controller *controller;
+
+ /*
+ * Open the fd to the HV. If it fails then this
+ * device doesn't exist.
+ */
+ hv_cfg_fd0 = tile_pcie_open(i, 0);
+ if (hv_cfg_fd0 < 0)
+ continue;
+ hv_cfg_fd1 = tile_pcie_open(i, 1);
+ if (hv_cfg_fd1 < 0) {
+ pr_err("PCI: Couldn't open config fd to HV "
+ "for controller %d\n", i);
+ goto err_cont;
+ }
+
+ sprintf(name, "pcie/%d/mem", i);
+ hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+ if (hv_mem_fd < 0) {
+ pr_err("PCI: Could not open mem fd to HV!\n");
+ goto err_cont;
+ }
+
+ pr_info("PCI: Found PCI controller #%d\n", i);
+
+ controller = &controllers[i];
+
+ if (tile_init_irqs(i, controller)) {
+ pr_err("PCI: Could not initialize "
+ "IRQs, aborting.\n");
+ goto err_cont;
+ }
+
+ controller->index = i;
+ controller->hv_cfg_fd[0] = hv_cfg_fd0;
+ controller->hv_cfg_fd[1] = hv_cfg_fd1;
+ controller->hv_mem_fd = hv_mem_fd;
+ controller->first_busno = 0;
+ controller->last_busno = 0xff;
+ controller->ops = &tile_cfg_ops;
+
+ num_controllers++;
continue;
- hv_cfg_fd1 = tile_pcie_open(i, 1);
- if (hv_cfg_fd1 < 0) {
- pr_err("PCI: Couldn't open config fd to HV "
- "for controller %d\n", i);
- goto err_cont;
- }
-
- sprintf(name, "pcie/%d/mem", i);
- hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
- if (hv_mem_fd < 0) {
- pr_err("PCI: Could not open mem fd to HV!\n");
- goto err_cont;
- }
-
- pr_info("PCI: Found PCI controller #%d\n", i);
-
- controller = &controllers[num_controllers];
-
- if (tile_init_irqs(i, controller)) {
- pr_err("PCI: Could not initialize "
- "IRQs, aborting.\n");
- goto err_cont;
- }
-
- controller->index = num_controllers;
- controller->hv_cfg_fd[0] = hv_cfg_fd0;
- controller->hv_cfg_fd[1] = hv_cfg_fd1;
- controller->hv_mem_fd = hv_mem_fd;
- controller->first_busno = 0;
- controller->last_busno = 0xff;
- controller->ops = &tile_cfg_ops;
-
- num_controllers++;
- continue;
err_cont:
- if (hv_cfg_fd0 >= 0)
- hv_dev_close(hv_cfg_fd0);
- if (hv_cfg_fd1 >= 0)
- hv_dev_close(hv_cfg_fd1);
- if (hv_mem_fd >= 0)
- hv_dev_close(hv_mem_fd);
- continue;
+ if (hv_cfg_fd0 >= 0)
+ hv_dev_close(hv_cfg_fd0);
+ if (hv_cfg_fd1 >= 0)
+ hv_dev_close(hv_cfg_fd1);
+ if (hv_mem_fd >= 0)
+ hv_dev_close(hv_mem_fd);
+ continue;
+ }
}
/*
@@ -232,7 +242,7 @@
}
-static void __init fixup_read_and_payload_sizes(void)
+static void __devinit fixup_read_and_payload_sizes(void)
{
struct pci_dev *dev = NULL;
int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
@@ -282,7 +292,7 @@
* The controllers have been set up by the time we get here, by a call to
* tile_pci_init.
*/
-static int __init pcibios_init(void)
+int __devinit pcibios_init(void)
{
int i;
@@ -296,25 +306,31 @@
mdelay(250);
/* Scan all of the recorded PCI controllers. */
- for (i = 0; i < num_controllers; i++) {
- struct pci_controller *controller = &controllers[i];
- struct pci_bus *bus;
-
- pr_info("PCI: initializing controller #%d\n", i);
-
+ for (i = 0; i < TILE_NUM_PCIE; i++) {
/*
- * This comes from the generic Linux PCI driver.
- *
- * It reads the PCI tree for this bus into the Linux
- * data structures.
- *
- * This is inlined in linux/pci.h and calls into
- * pci_scan_bus_parented() in probe.c.
+ * Do real pcibios init ops if the controller is initialized
+ * by tile_pci_init() successfully and not initialized by
+ * pcibios_init() yet to support PCIe hot-plug.
*/
- bus = pci_scan_bus(0, controller->ops, controller);
- controller->root_bus = bus;
- controller->last_busno = bus->subordinate;
+ if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
+ struct pci_controller *controller = &controllers[i];
+ struct pci_bus *bus;
+ pr_info("PCI: initializing controller #%d\n", i);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It reads the PCI tree for this bus into the Linux
+ * data structures.
+ *
+ * This is inlined in linux/pci.h and calls into
+ * pci_scan_bus_parented() in probe.c.
+ */
+ bus = pci_scan_bus(0, controller->ops, controller);
+ controller->root_bus = bus;
+ controller->last_busno = bus->subordinate;
+ }
}
/* Do machine dependent PCI interrupt routing */
@@ -326,34 +342,45 @@
* It allocates all of the resources (I/O memory, etc)
* associated with the devices read in above.
*/
-
pci_assign_unassigned_resources();
/* Configure the max_read_size and max_payload_size values. */
fixup_read_and_payload_sizes();
/* Record the I/O resources in the PCI controller structure. */
- for (i = 0; i < num_controllers; i++) {
- struct pci_bus *root_bus = controllers[i].root_bus;
- struct pci_bus *next_bus;
- struct pci_dev *dev;
+ for (i = 0; i < TILE_NUM_PCIE; i++) {
+ /*
+ * Do real pcibios init ops if the controller is initialized
+ * by tile_pci_init() successfully and not initialized by
+ * pcibios_init() yet to support PCIe hot-plug.
+ */
+ if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
+ struct pci_bus *root_bus = controllers[i].root_bus;
+ struct pci_bus *next_bus;
+ struct pci_dev *dev;
- list_for_each_entry(dev, &root_bus->devices, bus_list) {
- /* Find the PCI host controller, ie. the 1st bridge. */
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
- (PCI_SLOT(dev->devfn) == 0)) {
- next_bus = dev->subordinate;
- controllers[i].mem_resources[0] =
- *next_bus->resource[0];
- controllers[i].mem_resources[1] =
- *next_bus->resource[1];
- controllers[i].mem_resources[2] =
- *next_bus->resource[2];
+ list_for_each_entry(dev, &root_bus->devices, bus_list) {
+ /*
+ * Find the PCI host controller, ie. the 1st
+ * bridge.
+ */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ (PCI_SLOT(dev->devfn) == 0)) {
+ next_bus = dev->subordinate;
+ controllers[i].mem_resources[0] =
+ *next_bus->resource[0];
+ controllers[i].mem_resources[1] =
+ *next_bus->resource[1];
+ controllers[i].mem_resources[2] =
+ *next_bus->resource[2];
- break;
+ /* Setup flags. */
+ pci_scan_flags[i] = 1;
+
+ break;
+ }
}
}
-
}
return 0;
@@ -381,7 +408,7 @@
/*
* This is called from the generic Linux layer.
*/
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
{
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}