PCIe AER: use pci_pcie_cap()

Use pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCIe AER driver. This avoids unnecessary search in PCI
configuration space.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 40c3cc5..6d30e79 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -295,7 +295,7 @@
 	u16 reg16;
 
 	/* Clean up Root device status */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pos = pci_pcie_cap(dev);
 	pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &reg16);
 	pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, reg16);
 
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index f4512fe..5391a9b 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -42,7 +42,7 @@
 	if (!pos)
 		return -EIO;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pos = pci_pcie_cap(dev);
 	if (!pos)
 		return -EIO;
 
@@ -66,7 +66,7 @@
 	if (dev->aer_firmware_first)
 		return -EIO;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pos = pci_pcie_cap(dev);
 	if (!pos)
 		return -EIO;
 
@@ -224,7 +224,7 @@
 	 */
 	if (atomic_read(&dev->enable_cnt) == 0)
 		return 0;
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pos = pci_pcie_cap(dev);
 	if (!pos)
 		return 0;
 	/* Check if AER is enabled */
@@ -618,7 +618,7 @@
 	u16 reg16;
 	u32 reg32;
 
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+	pos = pci_pcie_cap(pdev);
 	/* Clear PCIE Capability's Device Status */
 	pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, &reg16);
 	pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);