sh: SH-2007 board support.
This patch series adds support for ITO Co., Ltd.'s SH-2007 reference
platform (A PC-104 based SH7780 platform).
This is a direct port of the out-of-tree board support from the vendor's
kernel, originally located at:
http://ms-n.org/sh-linux/kernel/
More information on the board and the vendor can be obtained from the
vendor's site at:
http://www.itonet.co.jp/
Presently supported peripherals are CF and ethernet, with support for
the on-board IDE still pending further testing.
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
new file mode 100644
index 0000000..b90b78f
--- /dev/null
+++ b/arch/sh/boards/board-sh2007.c
@@ -0,0 +1,133 @@
+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
+ * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+struct smsc911x_platform_config smc911x_info = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+ [0] = {
+ .start = SMC0_BASE,
+ .end = SMC0_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x240),
+ .end = evt2irq(0x240),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource smsc9118_1_resources[] = {
+ [0] = {
+ .start = SMC1_BASE,
+ .end = SMC1_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x280),
+ .end = evt2irq(0x280),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device smsc9118_0_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc9118_0_resources),
+ .resource = smsc9118_0_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
+static struct platform_device smsc9118_1_device = {
+ .name = "smsc911x",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(smsc9118_1_resources),
+ .resource = smsc9118_1_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
+static struct resource cf_resources[] = {
+ [0] = {
+ .start = CF_BASE + CF_OFFSET,
+ .end = CF_BASE + CF_OFFSET + 0x0f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CF_BASE + CF_OFFSET + 0x206,
+ .end = CF_BASE + CF_OFFSET + 0x20f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = evt2irq(0x2c0),
+ .end = evt2irq(0x2c0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_device = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(cf_resources),
+ .resource = cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+ &smsc9118_0_device,
+ &smsc9118_1_device,
+ &cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+ platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+ return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+ printk(KERN_INFO "SH-2007 Setup...");
+
+ /* setup wait control registers for area 5 */
+ __raw_writel(CS5BCR_D, CS5BCR);
+ __raw_writel(CS5WCR_D, CS5WCR);
+ __raw_writel(CS5PCR_D, CS5PCR);
+
+ printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+ .mv_setup = sh2007_setup,
+ .mv_name = "sh2007",
+ .mv_init_irq = sh2007_init_irq,
+};