Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 870d190..5b5db08 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -88,27 +88,6 @@
---------------------------
-What: CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
-When: March 2010 / desktop catchup
-
-Why: The old regulatory infrastructure has been replaced with a new one
- which does not require statically defined regulatory domains. We do
- not want to keep static regulatory domains in the kernel due to the
- the dynamic nature of regulatory law and localization. We kept around
- the old static definitions for the regulatory domains of:
-
- * US
- * JP
- * EU
-
- and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
- set. We will remove this option once the standard Linux desktop catches
- up with the new userspace APIs we have implemented.
-
-Who: Luis R. Rodriguez <lrodriguez@atheros.com>
-
----------------------------
-
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 3941001..e1f04bb 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1400,15 +1400,15 @@
}
static int adm8211_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct adm8211_priv *priv = dev->priv;
if (priv->mode != NL80211_IFTYPE_MONITOR)
return -EOPNOTSUPP;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
- priv->mode = conf->type;
+ priv->mode = vif->type;
break;
default:
return -EOPNOTSUPP;
@@ -1416,8 +1416,8 @@
ADM8211_IDLE();
- ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
- ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
+ ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)vif->addr));
+ ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(vif->addr + 4)));
adm8211_update_mode(dev);
@@ -1427,7 +1427,7 @@
}
static void adm8211_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct adm8211_priv *priv = dev->priv;
priv->mode = NL80211_IFTYPE_MONITOR;
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 2517364..0fb4199 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1789,7 +1789,7 @@
}
static int at76_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct at76_priv *priv = hw->priv;
int ret = 0;
@@ -1798,7 +1798,7 @@
mutex_lock(&priv->mtx);
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
priv->iw_mode = IW_MODE_INFRA;
break;
@@ -1814,7 +1814,7 @@
}
static void at76_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
at76_dbg(DBG_MAC80211, "%s()", __func__);
}
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 20f04ab..4d27f7f 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1939,7 +1939,7 @@
}
static int ar9170_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ar9170 *ar = hw->priv;
struct ath_common *common = &ar->common;
@@ -1952,8 +1952,8 @@
goto unlock;
}
- ar->vif = conf->vif;
- memcpy(common->macaddr, conf->mac_addr, ETH_ALEN);
+ ar->vif = vif;
+ memcpy(common->macaddr, vif->addr, ETH_ALEN);
if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
ar->rx_software_decryption = true;
@@ -1973,7 +1973,7 @@
}
static void ar9170_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ar9170 *ar = hw->priv;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index a4c086f..fdfaf0f 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -225,9 +225,9 @@
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
static int ath5k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
static void ath5k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
int mc_count, struct dev_addr_list *mc_list);
@@ -1903,17 +1903,6 @@
rxs->noise = sc->ah->ah_noise_floor;
rxs->signal = rxs->noise + rs.rs_rssi;
- /* An rssi of 35 indicates you should be able use
- * 54 Mbps reliably. A more elaborate scheme can be used
- * here but it requires a map of SNR/throughput for each
- * possible mode used */
- rxs->qual = rs.rs_rssi * 100 / 35;
-
- /* rssi can be more than 35 though, anything above that
- * should be considered at 100% */
- if (rxs->qual > 100)
- rxs->qual = 100;
-
rxs->antenna = rs.rs_antenna;
rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
@@ -2381,6 +2370,9 @@
*/
ath5k_stop_locked(sc);
+ /* Set PHY calibration interval */
+ ah->ah_cal_intval = ath5k_calinterval;
+
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
@@ -2408,10 +2400,6 @@
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(ah, false);
-
- /* Set PHY calibration inteval */
- ah->ah_cal_intval = ath5k_calinterval;
-
ret = 0;
done:
mmiowb();
@@ -2785,7 +2773,7 @@
}
static int ath5k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ath5k_softc *sc = hw->priv;
int ret;
@@ -2796,22 +2784,22 @@
goto end;
}
- sc->vif = conf->vif;
+ sc->vif = vif;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_MONITOR:
- sc->opmode = conf->type;
+ sc->opmode = vif->type;
break;
default:
ret = -EOPNOTSUPP;
goto end;
}
- ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
+ ath5k_hw_set_lladdr(sc->ah, vif->addr);
ath5k_mode_setup(sc);
ret = 0;
@@ -2822,13 +2810,13 @@
static void
ath5k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ath5k_softc *sc = hw->priv;
u8 mac[ETH_ALEN] = {};
mutex_lock(&sc->lock);
- if (sc->vif != conf->vif)
+ if (sc->vif != vif)
goto end;
ath5k_hw_set_lladdr(sc->ah, mac);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 0c87771..e185479 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -77,6 +77,9 @@
#define ATH9K_TXERR_XTXOP 0x08
#define ATH9K_TXERR_TIMER_EXPIRED 0x10
#define ATH9K_TX_ACKED 0x20
+#define ATH9K_TXERR_MASK \
+ (ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO | \
+ ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED)
#define ATH9K_TX_BA 0x01
#define ATH9K_TX_PWRMGMT 0x02
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3f5b887..79fbbda 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2504,6 +2504,9 @@
return; /* another wiphy still in use */
}
+ /* Ensure HW is awake when we try to shut it down. */
+ ath9k_ps_wakeup(sc);
+
if (ah->btcoex_hw.enabled) {
ath9k_hw_btcoex_disable(ah);
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
@@ -2524,6 +2527,9 @@
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
+ ath9k_ps_restore(sc);
+
+ /* Finally, put the chip in FULL SLEEP mode */
ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
@@ -2534,12 +2540,12 @@
}
static int ath9k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_vif *avp = (void *)conf->vif->drv_priv;
+ struct ath_vif *avp = (void *)vif->drv_priv;
enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
int ret = 0;
@@ -2551,7 +2557,7 @@
goto out;
}
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
ic_opmode = NL80211_IFTYPE_STATION;
break;
@@ -2562,11 +2568,11 @@
ret = -ENOBUFS;
goto out;
}
- ic_opmode = conf->type;
+ ic_opmode = vif->type;
break;
default:
ath_print(common, ATH_DBG_FATAL,
- "Interface type %d not yet supported\n", conf->type);
+ "Interface type %d not yet supported\n", vif->type);
ret = -EOPNOTSUPP;
goto out;
}
@@ -2598,18 +2604,18 @@
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
*/
- if ((conf->type == NL80211_IFTYPE_STATION) ||
- (conf->type == NL80211_IFTYPE_ADHOC) ||
- (conf->type == NL80211_IFTYPE_MESH_POINT)) {
+ if ((vif->type == NL80211_IFTYPE_STATION) ||
+ (vif->type == NL80211_IFTYPE_ADHOC) ||
+ (vif->type == NL80211_IFTYPE_MESH_POINT)) {
sc->imask |= ATH9K_INT_MIB;
sc->imask |= ATH9K_INT_TSFOOR;
}
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
- if (conf->type == NL80211_IFTYPE_AP ||
- conf->type == NL80211_IFTYPE_ADHOC ||
- conf->type == NL80211_IFTYPE_MONITOR)
+ if (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MONITOR)
ath_start_ani(common);
out:
@@ -2618,12 +2624,12 @@
}
static void ath9k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_vif *avp = (void *)conf->vif->drv_priv;
+ struct ath_vif *avp = (void *)vif->drv_priv;
int i;
ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
@@ -2637,14 +2643,16 @@
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ ath9k_ps_wakeup(sc);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath_beacon_return(sc, avp);
+ ath9k_ps_restore(sc);
}
sc->sc_flags &= ~SC_OP_BEACONS;
for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
- if (sc->beacon.bslot[i] == conf->vif) {
+ if (sc->beacon.bslot[i] == vif) {
printk(KERN_DEBUG "%s: vif had allocated beacon "
"slot\n", __func__);
sc->beacon.bslot[i] = NULL;
@@ -3087,15 +3095,21 @@
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_start(sc, sta, tid, ssn);
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_STOP:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_stop(sc, sta, tid);
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
+ ath9k_ps_wakeup(sc);
ath_tx_aggr_resume(sc, sta, tid);
+ ath9k_ps_restore(sc);
break;
default:
ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 5321f73..f7af5ea 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -96,7 +96,7 @@
pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
}
-const static struct ath_bus_ops ath_pci_bus_ops = {
+static const struct ath_bus_ops ath_pci_bus_ops = {
.read_cachesize = ath_pci_read_cachesize,
.cleanup = ath_pci_cleanup,
.eeprom_read = ath_pci_eeprom_read,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1e813bb..fa12b90 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2072,7 +2072,7 @@
&txq->axq_q, lastbf->list.prev);
txq->axq_depth--;
- txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
+ txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK);
txq->axq_tx_inprogress = false;
spin_unlock_bh(&txq->axq_lock);
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 64c12e1..073be56 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,6 +3,7 @@
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
+ select SSB_BLOCKIO
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
@@ -78,14 +79,6 @@
If unsure, say N.
-# Data transfers to the device via PIO
-# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
-config B43_PIO
- bool
- depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
- select SSB_BLOCKIO
- default y
-
config B43_NPHY
bool "Pre IEEE 802.11n support (BROKEN)"
depends on B43 && EXPERIMENTAL && BROKEN
@@ -137,12 +130,4 @@
for production use.
Only say Y, if you are debugging a problem in the b43 driver sourcecode.
-config B43_FORCE_PIO
- bool "Force usage of PIO instead of DMA"
- depends on B43 && B43_DEBUG
- ---help---
- This will disable DMA and always enable PIO instead.
- Say N!
- This is only for debugging the PIO engine code. You do
- _NOT_ want to enable this.
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 84772a2..5e83b6f 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -12,7 +12,7 @@
b43-y += lo.o
b43-y += wa.o
b43-y += dma.o
-b43-$(CONFIG_B43_PIO) += pio.o
+b43-y += pio.o
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf94..2f12a75 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -821,11 +821,9 @@
/* The device LEDs. */
struct b43_leds leds;
-#ifdef CONFIG_B43_PIO
/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
u8 pio_tailspace[4] __attribute__((__aligned__(8)));
-#endif /* CONFIG_B43_PIO */
};
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@@ -876,20 +874,9 @@
static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
{
-#ifdef CONFIG_B43_PIO
return dev->__using_pio_transfers;
-#else
- return 0;
-#endif
}
-#ifdef CONFIG_B43_FORCE_PIO
-# define B43_FORCE_PIO 1
-#else
-# define B43_FORCE_PIO 0
-#endif
-
-
/* Message printing */
void b43info(struct b43_wl *wl, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 027be27..615af22 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -383,160 +383,44 @@
}
}
-/* Check if a DMA region fits the device constraints.
- * Returns true, if the region is OK for usage with this device. */
-static inline bool b43_dma_address_ok(struct b43_dmaring *ring,
- dma_addr_t addr, size_t size)
-{
- switch (ring->type) {
- case B43_DMA_30BIT:
- if ((u64)addr + size > (1ULL << 30))
- return 0;
- break;
- case B43_DMA_32BIT:
- if ((u64)addr + size > (1ULL << 32))
- return 0;
- break;
- case B43_DMA_64BIT:
- /* Currently we can't have addresses beyond
- * 64bit in the kernel. */
- break;
- }
- return 1;
-}
-
-#define is_4k_aligned(addr) (((u64)(addr) & 0x0FFFull) == 0)
-#define is_8k_aligned(addr) (((u64)(addr) & 0x1FFFull) == 0)
-
-static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base,
- dma_addr_t dmaaddr, size_t size)
-{
- ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE);
- free_pages((unsigned long)base, get_order(size));
-}
-
-static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring,
- dma_addr_t *dmaaddr, size_t size,
- gfp_t gfp_flags)
-{
- void *base;
-
- base = (void *)__get_free_pages(gfp_flags, get_order(size));
- if (!base)
- return NULL;
- memset(base, 0, size);
- *dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size,
- DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) {
- free_pages((unsigned long)base, get_order(size));
- return NULL;
- }
-
- return base;
-}
-
-static void * b43_get_and_map_ringmem(struct b43_dmaring *ring,
- dma_addr_t *dmaaddr, size_t size)
-{
- void *base;
-
- base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
- GFP_KERNEL);
- if (!base) {
- b43err(ring->dev->wl, "Failed to allocate or map pages "
- "for DMA ringmemory\n");
- return NULL;
- }
- if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
- /* The memory does not fit our device constraints.
- * Retry with GFP_DMA set to get lower memory. */
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
- GFP_KERNEL | GFP_DMA);
- if (!base) {
- b43err(ring->dev->wl, "Failed to allocate or map pages "
- "in the GFP_DMA region for DMA ringmemory\n");
- return NULL;
- }
- if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- b43err(ring->dev->wl, "Failed to allocate DMA "
- "ringmemory that fits device constraints\n");
- return NULL;
- }
- }
- /* We expect the memory to be 4k aligned, at least. */
- if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) {
- b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
- return NULL;
- }
-
- return base;
-}
-
static int alloc_ringmemory(struct b43_dmaring *ring)
{
- unsigned int required;
- void *base;
- dma_addr_t dmaaddr;
+ gfp_t flags = GFP_KERNEL;
- /* There are several requirements to the descriptor ring memory:
- * - The memory region needs to fit the address constraints for the
- * device (same as for frame buffers).
- * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned.
- * - For 64bit DMA devices, the descriptor ring must be 8k aligned.
+ /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
+ * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing
+ * has shown that 4K is sufficient for the latter as long as the buffer
+ * does not cross an 8K boundary.
+ *
+ * For unknown reasons - possibly a hardware error - the BCM4311 rev
+ * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
+ * which accounts for the GFP_DMA flag below.
+ *
+ * The flags here must match the flags in free_ringmemory below!
*/
-
if (ring->type == B43_DMA_64BIT)
- required = ring->nr_slots * sizeof(struct b43_dmadesc64);
- else
- required = ring->nr_slots * sizeof(struct b43_dmadesc32);
- if (B43_WARN_ON(required > 0x1000))
+ flags |= GFP_DMA;
+ ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+ B43_DMA_RINGMEMSIZE,
+ &(ring->dmabase), flags);
+ if (!ring->descbase) {
+ b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
return -ENOMEM;
-
- ring->alloc_descsize = 0x1000;
- base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
- if (!base)
- return -ENOMEM;
- ring->alloc_descbase = base;
- ring->alloc_dmabase = dmaaddr;
-
- if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) {
- /* We're on <=32bit DMA, or we already got 8k aligned memory.
- * That's all we need, so we're fine. */
- ring->descbase = base;
- ring->dmabase = dmaaddr;
- return 0;
}
- b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize);
-
- /* Ok, we failed at the 8k alignment requirement.
- * Try to force-align the memory region now. */
- ring->alloc_descsize = 0x2000;
- base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
- if (!base)
- return -ENOMEM;
- ring->alloc_descbase = base;
- ring->alloc_dmabase = dmaaddr;
-
- if (is_8k_aligned(dmaaddr)) {
- /* We're already 8k aligned. That Ok, too. */
- ring->descbase = base;
- ring->dmabase = dmaaddr;
- return 0;
- }
- /* Force-align it to 8k */
- ring->descbase = (void *)((u8 *)base + 0x1000);
- ring->dmabase = dmaaddr + 0x1000;
- B43_WARN_ON(!is_8k_aligned(ring->dmabase));
+ memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE);
return 0;
}
static void free_ringmemory(struct b43_dmaring *ring)
{
- b43_unmap_and_free_ringmem(ring, ring->alloc_descbase,
- ring->alloc_dmabase, ring->alloc_descsize);
+ gfp_t flags = GFP_KERNEL;
+
+ if (ring->type == B43_DMA_64BIT)
+ flags |= GFP_DMA;
+
+ ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
+ ring->descbase, ring->dmabase, flags);
}
/* Reset the RX DMA channel */
@@ -646,14 +530,29 @@
if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
return 1;
- if (!b43_dma_address_ok(ring, addr, buffersize)) {
- /* We can't support this address. Unmap it again. */
- unmap_descbuffer(ring, addr, buffersize, dma_to_device);
- return 1;
+ switch (ring->type) {
+ case B43_DMA_30BIT:
+ if ((u64)addr + buffersize > (1ULL << 30))
+ goto address_error;
+ break;
+ case B43_DMA_32BIT:
+ if ((u64)addr + buffersize > (1ULL << 32))
+ goto address_error;
+ break;
+ case B43_DMA_64BIT:
+ /* Currently we can't have addresses beyond
+ * 64bit in the kernel. */
+ break;
}
/* The address is OK. */
return 0;
+
+address_error:
+ /* We can't support this address. Unmap it again. */
+ unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+ return 1;
}
static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
@@ -715,9 +614,6 @@
meta->dmaaddr = dmaaddr;
ring->ops->fill_descriptor(ring, desc, dmaaddr,
ring->rx_buffersize, 0, 0, 0);
- ssb_dma_sync_single_for_device(ring->dev->dev,
- ring->alloc_dmabase,
- ring->alloc_descsize, DMA_TO_DEVICE);
return 0;
}
@@ -1354,9 +1250,6 @@
}
/* Now transfer the whole frame. */
wmb();
- ssb_dma_sync_single_for_device(ring->dev->dev,
- ring->alloc_dmabase,
- ring->alloc_descsize, DMA_TO_DEVICE);
ops->poke_tx(ring, next_slot(ring, slot));
return 0;
@@ -1760,7 +1653,6 @@
b43_power_saving_ctl_bits(dev, 0);
}
-#ifdef CONFIG_B43_PIO
static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type,
u16 mmio_base, bool enable)
{
@@ -1794,4 +1686,3 @@
mmio_base = b43_dmacontroller_base(type, engine_index);
direct_fifo_rx(dev, type, mmio_base, enable);
}
-#endif /* CONFIG_B43_PIO */
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index e607b39..f7ab37c 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -157,6 +157,7 @@
} __attribute__ ((__packed__));
/* Misc DMA constants */
+#define B43_DMA_RINGMEMSIZE PAGE_SIZE
#define B43_DMA0_RX_FRAMEOFFSET 30
/* DMA engine tuning knobs */
@@ -246,12 +247,6 @@
/* The QOS priority assigned to this ring. Only used for TX rings.
* This is the mac80211 "queue" value. */
u8 queue_prio;
- /* Pointers and size of the originally allocated and mapped memory
- * region for the descriptor ring. */
- void *alloc_descbase;
- dma_addr_t alloc_dmabase;
- unsigned int alloc_descsize;
- /* Pointer to our wireless device. */
struct b43_wldev *dev;
#ifdef CONFIG_B43_DEBUG
/* Maximum number of used slots. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4c41cfe..60290c0 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -102,6 +102,9 @@
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
+static int modparam_pio;
+module_param_named(pio, modparam_pio, int, 0444);
+MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1786,8 +1789,8 @@
dma_reason[4], dma_reason[5]);
b43err(dev->wl, "This device does not support DMA "
"on your system. Please use PIO instead.\n");
- b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in "
- "your kernel configuration.\n");
+ b43err(dev->wl, "Unload the b43 module and reload "
+ "with 'pio=1'\n");
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4353,7 +4356,7 @@
if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
(dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
- B43_FORCE_PIO) {
+ modparam_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
@@ -4388,7 +4391,7 @@
}
static int b43_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
@@ -4396,24 +4399,24 @@
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != NL80211_IFTYPE_AP &&
- conf->type != NL80211_IFTYPE_MESH_POINT &&
- conf->type != NL80211_IFTYPE_STATION &&
- conf->type != NL80211_IFTYPE_WDS &&
- conf->type != NL80211_IFTYPE_ADHOC)
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_MESH_POINT &&
+ vif->type != NL80211_IFTYPE_STATION &&
+ vif->type != NL80211_IFTYPE_WDS &&
+ vif->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
if (wl->operating)
goto out_mutex_unlock;
- b43dbg(wl, "Adding Interface type %d\n", conf->type);
+ b43dbg(wl, "Adding Interface type %d\n", vif->type);
dev = wl->current_dev;
wl->operating = 1;
- wl->vif = conf->vif;
- wl->if_type = conf->type;
- memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ wl->vif = vif;
+ wl->if_type = vif->type;
+ memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
b43_adjust_opmode(dev);
b43_set_pretbtt(dev);
@@ -4428,17 +4431,17 @@
}
static void b43_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
- b43dbg(wl, "Removing Interface type %d\n", conf->type);
+ b43dbg(wl, "Removing Interface type %d\n", vif->type);
mutex_lock(&wl->mutex);
B43_WARN_ON(!wl->operating);
- B43_WARN_ON(wl->vif != conf->vif);
+ B43_WARN_ON(wl->vif != vif);
wl->vif = NULL;
wl->operating = 0;
diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h
index 7dd649c..7b3c42f 100644
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -55,8 +55,6 @@
#define B43_PIO_MAX_NR_TXPACKETS 32
-#ifdef CONFIG_B43_PIO
-
struct b43_pio_txpacket {
/* Pointer to the TX queue we belong to. */
struct b43_pio_txqueue *queue;
@@ -169,42 +167,4 @@
void b43_pio_tx_suspend(struct b43_wldev *dev);
void b43_pio_tx_resume(struct b43_wldev *dev);
-
-#else /* CONFIG_B43_PIO */
-
-
-static inline int b43_pio_init(struct b43_wldev *dev)
-{
- return 0;
-}
-static inline void b43_pio_free(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_stop(struct b43_wldev *dev)
-{
-}
-static inline int b43_pio_tx(struct b43_wldev *dev,
- struct sk_buff *skb)
-{
- return 0;
-}
-static inline void b43_pio_handle_txstatus(struct b43_wldev *dev,
- const struct b43_txstatus *status)
-{
-}
-static inline void b43_pio_get_tx_stats(struct b43_wldev *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline void b43_pio_rx(struct b43_pio_rxqueue *q)
-{
-}
-static inline void b43_pio_tx_suspend(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_tx_resume(struct b43_wldev *dev)
-{
-}
-
-#endif /* CONFIG_B43_PIO */
#endif /* B43_PIO_H_ */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 4a905b6..fbae264 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3361,7 +3361,7 @@
}
static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
@@ -3370,23 +3370,23 @@
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != NL80211_IFTYPE_AP &&
- conf->type != NL80211_IFTYPE_STATION &&
- conf->type != NL80211_IFTYPE_WDS &&
- conf->type != NL80211_IFTYPE_ADHOC)
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_STATION &&
+ vif->type != NL80211_IFTYPE_WDS &&
+ vif->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
if (wl->operating)
goto out_mutex_unlock;
- b43legacydbg(wl, "Adding Interface type %d\n", conf->type);
+ b43legacydbg(wl, "Adding Interface type %d\n", vif->type);
dev = wl->current_dev;
wl->operating = 1;
- wl->vif = conf->vif;
- wl->if_type = conf->type;
- memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ wl->vif = vif;
+ wl->if_type = vif->type;
+ memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_adjust_opmode(dev);
@@ -3403,18 +3403,18 @@
}
static void b43legacy_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
- b43legacydbg(wl, "Removing Interface type %d\n", conf->type);
+ b43legacydbg(wl, "Removing Interface type %d\n", vif->type);
mutex_lock(&wl->mutex);
B43legacy_WARN_ON(!wl->operating);
- B43legacy_WARN_ON(wl->vif != conf->vif);
+ B43legacy_WARN_ON(wl->vif != vif);
wl->vif = NULL;
wl->operating = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index d1bab14..28ffe4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -681,19 +681,13 @@
snr = rx_stats_sig_avg / rx_stats_noise_diff;
rx_status.noise = rx_status.signal -
iwl3945_calc_db_from_ratio(snr);
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
- rx_status.noise);
-
- /* If noise info not available, calculate signal quality indicator (%)
- * using just the dBm signal level. */
} else {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
}
- IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+ rx_status.signal, rx_status.noise,
rx_stats_sig_avg, rx_stats_noise_diff);
header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 28f6eb5..3ec2fe3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -222,7 +222,6 @@
*
*****************************************************************************/
extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
extern void iwl3945_rx_replenish(void *data);
extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index fe511cb..b93e491 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -150,7 +150,7 @@
};
/* mbps, mcs */
-const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
{ "1", "BPSK DSSS"},
{ "2", "QPSK DSSS"},
{"5.5", "BPSK CCK"},
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index e3b96b4..14f4829 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2584,12 +2584,12 @@
EXPORT_SYMBOL(iwl_set_mode);
int iwl_mac_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct iwl_priv *priv = hw->priv;
unsigned long flags;
- IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
+ IWL_DEBUG_MAC80211(priv, "enter: type %d\n", vif->type);
if (priv->vif) {
IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
@@ -2597,19 +2597,19 @@
}
spin_lock_irqsave(&priv->lock, flags);
- priv->vif = conf->vif;
- priv->iw_mode = conf->type;
+ priv->vif = vif;
+ priv->iw_mode = vif->type;
spin_unlock_irqrestore(&priv->lock, flags);
mutex_lock(&priv->mutex);
- if (conf->mac_addr) {
- IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
- memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+ if (vif->addr) {
+ IWL_DEBUG_MAC80211(priv, "Set %pM\n", vif->addr);
+ memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
}
- if (iwl_set_mode(priv, conf->type) == -EAGAIN)
+ if (iwl_set_mode(priv, vif->type) == -EAGAIN)
/* we are not ready, will run again when ready */
set_bit(STATUS_MODE_PENDING, &priv->status);
@@ -2621,7 +2621,7 @@
EXPORT_SYMBOL(iwl_mac_add_interface);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct iwl_priv *priv = hw->priv;
@@ -2634,7 +2634,7 @@
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
}
- if (priv->vif == conf->vif) {
+ if (priv->vif == vif) {
priv->vif = NULL;
memset(priv->bssid, 0, ETH_ALEN);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 308f679..3ef86f6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -332,9 +332,9 @@
int iwl_commit_rxon(struct iwl_priv *priv);
int iwl_set_mode(struct iwl_priv *priv, int mode);
int iwl_mac_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
void iwl_config_ap(struct iwl_priv *priv);
int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f5c87e7..6f36b6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -650,47 +650,6 @@
}
EXPORT_SYMBOL(iwl_reply_statistics);
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/* Calc max signal level (dBm) among 3 possible receivers */
static inline int iwl_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp)
@@ -1101,11 +1060,8 @@
if (iwl_is_associated(priv) &&
!test_bit(STATUS_SCANNING, &priv->status)) {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
- rx_status.noise);
} else {
rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
}
/* Reset beacon noise level if not associated. */
@@ -1118,8 +1074,8 @@
iwl_dbg_report_frame(priv, phy_res, len, header, 1);
#endif
iwl_dbg_log_rx_data_frame(priv, len, header);
- IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+ rx_status.signal, rx_status.noise,
(unsigned long long)rx_status.mactime);
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 6533122..10b0aa8 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1299,47 +1299,6 @@
return (int)ratio2dB[sig_ratio];
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/**
* iwl3945_rx_handle - Main entry function for receiving responses from uCode
*
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 79ffa3b..8428111 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -268,7 +268,7 @@
struct sk_buff_head rx_list;
struct list_head rx_tickets;
- struct list_head rx_packets[IWM_RX_ID_HASH];
+ struct list_head rx_packets[IWM_RX_ID_HASH + 1];
struct workqueue_struct *rx_wq;
struct work_struct rx_worker;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 4a0c3e3..220361e 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -567,11 +567,8 @@
chan_count = lbs_scan_create_channel_list(priv, chan_list);
netif_stop_queue(priv->dev);
- netif_carrier_off(priv->dev);
- if (priv->mesh_dev) {
+ if (priv->mesh_dev)
netif_stop_queue(priv->mesh_dev);
- netif_carrier_off(priv->mesh_dev);
- }
/* Prepare to continue an interrupted scan */
lbs_deb_scan("chan_count %d, scan_channel %d\n",
@@ -635,16 +632,13 @@
priv->scan_channel = 0;
out:
- if (priv->connect_status == LBS_CONNECTED) {
- netif_carrier_on(priv->dev);
- if (!priv->tx_pending_len)
- netif_wake_queue(priv->dev);
- }
- if (priv->mesh_dev && lbs_mesh_connected(priv)) {
- netif_carrier_on(priv->mesh_dev);
- if (!priv->tx_pending_len)
- netif_wake_queue(priv->mesh_dev);
- }
+ if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len)
+ netif_wake_queue(priv->dev);
+
+ if (priv->mesh_dev && lbs_mesh_connected(priv) &&
+ !priv->tx_pending_len)
+ netif_wake_queue(priv->mesh_dev);
+
kfree(chan_list);
lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 019431d..ba3eb01 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -318,14 +318,14 @@
}
static int lbtf_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct lbtf_private *priv = hw->priv;
if (priv->vif != NULL)
return -EOPNOTSUPP;
- priv->vif = conf->vif;
- switch (conf->type) {
+ priv->vif = vif;
+ switch (vif->type) {
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_AP:
lbtf_set_mode(priv, LBTF_AP_MODE);
@@ -337,12 +337,12 @@
priv->vif = NULL;
return -EOPNOTSUPP;
}
- lbtf_set_mac_address(priv, (u8 *) conf->mac_addr);
+ lbtf_set_mac_address(priv, (u8 *) vif->addr);
return 0;
}
static void lbtf_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct lbtf_private *priv = hw->priv;
@@ -495,7 +495,6 @@
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = prxpd->snr;
stats.noise = prxpd->nf;
- stats.qual = prxpd->snr - prxpd->nf;
/* Marvell rate index has a hole at value 4 */
if (prxpd->rx_rate > 4)
--prxpd->rx_rate;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 718a5f1..84df3fc 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -584,24 +584,24 @@
static int mac80211_hwsim_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
- wiphy_name(hw->wiphy), __func__, conf->type,
- conf->mac_addr);
- hwsim_set_magic(conf->vif);
+ wiphy_name(hw->wiphy), __func__, vif->type,
+ vif->addr);
+ hwsim_set_magic(vif);
return 0;
}
static void mac80211_hwsim_remove_interface(
- struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf)
+ struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
- wiphy_name(hw->wiphy), __func__, conf->type,
- conf->mac_addr);
- hwsim_check_magic(conf->vif);
- hwsim_clear_magic(conf->vif);
+ wiphy_name(hw->wiphy), __func__, vif->type,
+ vif->addr);
+ hwsim_check_magic(vif);
+ hwsim_clear_magic(vif);
}
@@ -896,6 +896,16 @@
return 0;
}
+static void mac80211_hwsim_flush(struct ieee80211_hw *hw, bool drop)
+{
+ /*
+ * In this special case, there's nothing we need to
+ * do because hwsim does transmission synchronously.
+ * In the future, when it does transmissions via
+ * userspace, we may need to do something.
+ */
+}
+
static const struct ieee80211_ops mac80211_hwsim_ops =
{
@@ -912,6 +922,7 @@
.conf_tx = mac80211_hwsim_conf_tx,
CFG80211_TESTMODE_CMD(mac80211_hwsim_testmode_cmd)
.ampdu_action = mac80211_hwsim_ampdu_action,
+ .flush = mac80211_hwsim_flush,
};
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 59d4915..c1c6ecd 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -92,8 +92,7 @@
char *part_name;
char *helper_image;
char *fw_image;
- struct rxd_ops *rxd_ops;
- u16 modes;
+ struct rxd_ops *ap_rxd_ops;
};
struct mwl8k_rx_queue {
@@ -126,29 +125,23 @@
struct sk_buff **skb;
};
-/* Pointers to the firmware data and meta information about it. */
-struct mwl8k_firmware {
- /* Boot helper code */
- struct firmware *helper;
-
- /* Microcode */
- struct firmware *ucode;
-};
-
struct mwl8k_priv {
- void __iomem *sram;
- void __iomem *regs;
struct ieee80211_hw *hw;
-
struct pci_dev *pdev;
struct mwl8k_device_info *device_info;
+
+ void __iomem *sram;
+ void __iomem *regs;
+
+ /* firmware */
+ struct firmware *fw_helper;
+ struct firmware *fw_ucode;
+
+ /* hardware/firmware parameters */
bool ap_fw;
struct rxd_ops *rxd_ops;
- /* firmware files and meta data */
- struct mwl8k_firmware fw;
-
/* firmware access */
struct mutex fw_mutex;
struct task_struct *fw_mutex_owner;
@@ -211,17 +204,13 @@
/* Per interface specific private data */
struct mwl8k_vif {
- /* backpointer to parent config block */
- struct mwl8k_priv *priv;
+ /* Local MAC address. */
+ u8 mac_addr[ETH_ALEN];
- /* BSS config of AP or IBSS from mac80211*/
- struct ieee80211_bss_conf bss_info;
+ /* BSSID of AP. */
+ u8 bssid[ETH_ALEN];
- /* BSSID of AP or IBSS */
- u8 bssid[ETH_ALEN];
- u8 mac_addr[ETH_ALEN];
-
- /* Index into station database.Returned by update_sta_db call */
+ /* Index into station database. Returned by UPDATE_STADB. */
u8 peer_id;
/* Non AMPDU sequence number assigned by driver */
@@ -242,6 +231,9 @@
{ .center_freq = 2452, .hw_value = 9, },
{ .center_freq = 2457, .hw_value = 10, },
{ .center_freq = 2462, .hw_value = 11, },
+ { .center_freq = 2467, .hw_value = 12, },
+ { .center_freq = 2472, .hw_value = 13, },
+ { .center_freq = 2484, .hw_value = 14, },
};
static const struct ieee80211_rate mwl8k_rates[] = {
@@ -355,8 +347,8 @@
static void mwl8k_release_firmware(struct mwl8k_priv *priv)
{
- mwl8k_release_fw(&priv->fw.ucode);
- mwl8k_release_fw(&priv->fw.helper);
+ mwl8k_release_fw(&priv->fw_ucode);
+ mwl8k_release_fw(&priv->fw_helper);
}
/* Request fw image */
@@ -377,7 +369,7 @@
int rc;
if (di->helper_image != NULL) {
- rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw.helper);
+ rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw_helper);
if (rc) {
printk(KERN_ERR "%s: Error requesting helper "
"firmware file %s\n", pci_name(priv->pdev),
@@ -386,11 +378,11 @@
}
}
- rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw.ucode);
+ rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw_ucode);
if (rc) {
printk(KERN_ERR "%s: Error requesting firmware file %s\n",
pci_name(priv->pdev), di->fw_image);
- mwl8k_release_fw(&priv->fw.helper);
+ mwl8k_release_fw(&priv->fw_helper);
return rc;
}
@@ -551,13 +543,12 @@
static int mwl8k_load_firmware(struct ieee80211_hw *hw)
{
struct mwl8k_priv *priv = hw->priv;
- struct firmware *fw = priv->fw.ucode;
- struct mwl8k_device_info *di = priv->device_info;
+ struct firmware *fw = priv->fw_ucode;
int rc;
int loops;
if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) {
- struct firmware *helper = priv->fw.helper;
+ struct firmware *helper = priv->fw_helper;
if (helper == NULL) {
printk(KERN_ERR "%s: helper image needed but none "
@@ -584,10 +575,7 @@
return rc;
}
- if (di->modes & BIT(NL80211_IFTYPE_AP))
- iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
- else
- iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
+ iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
loops = 500000;
do {
@@ -658,43 +646,6 @@
__le16 amsdu_enabled;
} __attribute__((packed));
-/* Inline functions to manipulate QoS field in data descriptor. */
-static inline u16 mwl8k_qos_setbit_eosp(u16 qos)
-{
- u16 val_mask = 1 << 4;
-
- /* End of Service Period Bit 4 */
- return qos | val_mask;
-}
-
-static inline u16 mwl8k_qos_setbit_ack(u16 qos, u8 ack_policy)
-{
- u16 val_mask = 0x3;
- u8 shift = 5;
- u16 qos_mask = ~(val_mask << shift);
-
- /* Ack Policy Bit 5-6 */
- return (qos & qos_mask) | ((ack_policy & val_mask) << shift);
-}
-
-static inline u16 mwl8k_qos_setbit_amsdu(u16 qos)
-{
- u16 val_mask = 1 << 7;
-
- /* AMSDU present Bit 7 */
- return qos | val_mask;
-}
-
-static inline u16 mwl8k_qos_setbit_qlen(u16 qos, u8 len)
-{
- u16 val_mask = 0xff;
- u8 shift = 8;
- u16 qos_mask = ~(val_mask << shift);
-
- /* Queue Length Bits 8-15 */
- return (qos & qos_mask) | ((len & val_mask) << shift);
-}
-
/* DMA header used by firmware and hardware. */
struct mwl8k_dma_data {
__le16 fwlen;
@@ -761,9 +712,9 @@
/*
- * Packet reception for 88w8366.
+ * Packet reception for 88w8366 AP firmware.
*/
-struct mwl8k_rxd_8366 {
+struct mwl8k_rxd_8366_ap {
__le16 pkt_len;
__u8 sq2;
__u8 rate;
@@ -781,23 +732,23 @@
__u8 rx_ctrl;
} __attribute__((packed));
-#define MWL8K_8366_RATE_INFO_MCS_FORMAT 0x80
-#define MWL8K_8366_RATE_INFO_40MHZ 0x40
-#define MWL8K_8366_RATE_INFO_RATEID(x) ((x) & 0x3f)
+#define MWL8K_8366_AP_RATE_INFO_MCS_FORMAT 0x80
+#define MWL8K_8366_AP_RATE_INFO_40MHZ 0x40
+#define MWL8K_8366_AP_RATE_INFO_RATEID(x) ((x) & 0x3f)
-#define MWL8K_8366_RX_CTRL_OWNED_BY_HOST 0x80
+#define MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST 0x80
-static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr)
+static void mwl8k_rxd_8366_ap_init(void *_rxd, dma_addr_t next_dma_addr)
{
- struct mwl8k_rxd_8366 *rxd = _rxd;
+ struct mwl8k_rxd_8366_ap *rxd = _rxd;
rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
- rxd->rx_ctrl = MWL8K_8366_RX_CTRL_OWNED_BY_HOST;
+ rxd->rx_ctrl = MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST;
}
-static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
+static void mwl8k_rxd_8366_ap_refill(void *_rxd, dma_addr_t addr, int len)
{
- struct mwl8k_rxd_8366 *rxd = _rxd;
+ struct mwl8k_rxd_8366_ap *rxd = _rxd;
rxd->pkt_len = cpu_to_le16(len);
rxd->pkt_phys_addr = cpu_to_le32(addr);
@@ -806,12 +757,12 @@
}
static int
-mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
- __le16 *qos)
+mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status,
+ __le16 *qos)
{
- struct mwl8k_rxd_8366 *rxd = _rxd;
+ struct mwl8k_rxd_8366_ap *rxd = _rxd;
- if (!(rxd->rx_ctrl & MWL8K_8366_RX_CTRL_OWNED_BY_HOST))
+ if (!(rxd->rx_ctrl & MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST))
return -1;
rmb();
@@ -820,11 +771,11 @@
status->signal = -rxd->rssi;
status->noise = -rxd->noise_floor;
- if (rxd->rate & MWL8K_8366_RATE_INFO_MCS_FORMAT) {
+ if (rxd->rate & MWL8K_8366_AP_RATE_INFO_MCS_FORMAT) {
status->flag |= RX_FLAG_HT;
- if (rxd->rate & MWL8K_8366_RATE_INFO_40MHZ)
+ if (rxd->rate & MWL8K_8366_AP_RATE_INFO_40MHZ)
status->flag |= RX_FLAG_40MHZ;
- status->rate_idx = MWL8K_8366_RATE_INFO_RATEID(rxd->rate);
+ status->rate_idx = MWL8K_8366_AP_RATE_INFO_RATEID(rxd->rate);
} else {
int i;
@@ -844,17 +795,17 @@
return le16_to_cpu(rxd->pkt_len);
}
-static struct rxd_ops rxd_8366_ops = {
- .rxd_size = sizeof(struct mwl8k_rxd_8366),
- .rxd_init = mwl8k_rxd_8366_init,
- .rxd_refill = mwl8k_rxd_8366_refill,
- .rxd_process = mwl8k_rxd_8366_process,
+static struct rxd_ops rxd_8366_ap_ops = {
+ .rxd_size = sizeof(struct mwl8k_rxd_8366_ap),
+ .rxd_init = mwl8k_rxd_8366_ap_init,
+ .rxd_refill = mwl8k_rxd_8366_ap_refill,
+ .rxd_process = mwl8k_rxd_8366_ap_process,
};
/*
- * Packet reception for 88w8687.
+ * Packet reception for STA firmware.
*/
-struct mwl8k_rxd_8687 {
+struct mwl8k_rxd_sta {
__le16 pkt_len;
__u8 link_quality;
__u8 noise_level;
@@ -871,26 +822,26 @@
__u8 pad2[2];
} __attribute__((packed));
-#define MWL8K_8687_RATE_INFO_SHORTPRE 0x8000
-#define MWL8K_8687_RATE_INFO_ANTSELECT(x) (((x) >> 11) & 0x3)
-#define MWL8K_8687_RATE_INFO_RATEID(x) (((x) >> 3) & 0x3f)
-#define MWL8K_8687_RATE_INFO_40MHZ 0x0004
-#define MWL8K_8687_RATE_INFO_SHORTGI 0x0002
-#define MWL8K_8687_RATE_INFO_MCS_FORMAT 0x0001
+#define MWL8K_STA_RATE_INFO_SHORTPRE 0x8000
+#define MWL8K_STA_RATE_INFO_ANTSELECT(x) (((x) >> 11) & 0x3)
+#define MWL8K_STA_RATE_INFO_RATEID(x) (((x) >> 3) & 0x3f)
+#define MWL8K_STA_RATE_INFO_40MHZ 0x0004
+#define MWL8K_STA_RATE_INFO_SHORTGI 0x0002
+#define MWL8K_STA_RATE_INFO_MCS_FORMAT 0x0001
-#define MWL8K_8687_RX_CTRL_OWNED_BY_HOST 0x02
+#define MWL8K_STA_RX_CTRL_OWNED_BY_HOST 0x02
-static void mwl8k_rxd_8687_init(void *_rxd, dma_addr_t next_dma_addr)
+static void mwl8k_rxd_sta_init(void *_rxd, dma_addr_t next_dma_addr)
{
- struct mwl8k_rxd_8687 *rxd = _rxd;
+ struct mwl8k_rxd_sta *rxd = _rxd;
rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
- rxd->rx_ctrl = MWL8K_8687_RX_CTRL_OWNED_BY_HOST;
+ rxd->rx_ctrl = MWL8K_STA_RX_CTRL_OWNED_BY_HOST;
}
-static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
+static void mwl8k_rxd_sta_refill(void *_rxd, dma_addr_t addr, int len)
{
- struct mwl8k_rxd_8687 *rxd = _rxd;
+ struct mwl8k_rxd_sta *rxd = _rxd;
rxd->pkt_len = cpu_to_le16(len);
rxd->pkt_phys_addr = cpu_to_le32(addr);
@@ -899,13 +850,13 @@
}
static int
-mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
+mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status,
__le16 *qos)
{
- struct mwl8k_rxd_8687 *rxd = _rxd;
+ struct mwl8k_rxd_sta *rxd = _rxd;
u16 rate_info;
- if (!(rxd->rx_ctrl & MWL8K_8687_RX_CTRL_OWNED_BY_HOST))
+ if (!(rxd->rx_ctrl & MWL8K_STA_RX_CTRL_OWNED_BY_HOST))
return -1;
rmb();
@@ -915,16 +866,16 @@
status->signal = -rxd->rssi;
status->noise = -rxd->noise_level;
- status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info);
- status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info);
+ status->antenna = MWL8K_STA_RATE_INFO_ANTSELECT(rate_info);
+ status->rate_idx = MWL8K_STA_RATE_INFO_RATEID(rate_info);
- if (rate_info & MWL8K_8687_RATE_INFO_SHORTPRE)
+ if (rate_info & MWL8K_STA_RATE_INFO_SHORTPRE)
status->flag |= RX_FLAG_SHORTPRE;
- if (rate_info & MWL8K_8687_RATE_INFO_40MHZ)
+ if (rate_info & MWL8K_STA_RATE_INFO_40MHZ)
status->flag |= RX_FLAG_40MHZ;
- if (rate_info & MWL8K_8687_RATE_INFO_SHORTGI)
+ if (rate_info & MWL8K_STA_RATE_INFO_SHORTGI)
status->flag |= RX_FLAG_SHORT_GI;
- if (rate_info & MWL8K_8687_RATE_INFO_MCS_FORMAT)
+ if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT)
status->flag |= RX_FLAG_HT;
status->band = IEEE80211_BAND_2GHZ;
@@ -935,11 +886,11 @@
return le16_to_cpu(rxd->pkt_len);
}
-static struct rxd_ops rxd_8687_ops = {
- .rxd_size = sizeof(struct mwl8k_rxd_8687),
- .rxd_init = mwl8k_rxd_8687_init,
- .rxd_refill = mwl8k_rxd_8687_refill,
- .rxd_process = mwl8k_rxd_8687_process,
+static struct rxd_ops rxd_sta_ops = {
+ .rxd_size = sizeof(struct mwl8k_rxd_sta),
+ .rxd_init = mwl8k_rxd_sta_init,
+ .rxd_refill = mwl8k_rxd_sta_refill,
+ .rxd_process = mwl8k_rxd_sta_process,
};
@@ -1153,16 +1104,18 @@
* Packet transmission.
*/
-/* Transmit packet ACK policy */
-#define MWL8K_TXD_ACK_POLICY_NORMAL 0
-#define MWL8K_TXD_ACK_POLICY_BLOCKACK 3
-
#define MWL8K_TXD_STATUS_OK 0x00000001
#define MWL8K_TXD_STATUS_OK_RETRY 0x00000002
#define MWL8K_TXD_STATUS_OK_MORE_RETRY 0x00000004
#define MWL8K_TXD_STATUS_MULTICAST_TX 0x00000008
#define MWL8K_TXD_STATUS_FW_OWNED 0x80000000
+#define MWL8K_QOS_QLEN_UNSPEC 0xff00
+#define MWL8K_QOS_ACK_POLICY_MASK 0x0060
+#define MWL8K_QOS_ACK_POLICY_NORMAL 0x0000
+#define MWL8K_QOS_ACK_POLICY_BLOCKACK 0x0060
+#define MWL8K_QOS_EOSP 0x0010
+
struct mwl8k_tx_desc {
__le32 status;
__u8 data_rate;
@@ -1459,24 +1412,17 @@
if (ieee80211_is_mgmt(wh->frame_control) ||
ieee80211_is_ctl(wh->frame_control)) {
txdatarate = 0;
- qos = mwl8k_qos_setbit_eosp(qos);
- /* Set Queue size to unspecified */
- qos = mwl8k_qos_setbit_qlen(qos, 0xff);
+ qos |= MWL8K_QOS_QLEN_UNSPEC | MWL8K_QOS_EOSP;
} else if (ieee80211_is_data(wh->frame_control)) {
txdatarate = 1;
if (is_multicast_ether_addr(wh->addr1))
txstatus |= MWL8K_TXD_STATUS_MULTICAST_TX;
- /* Send pkt in an aggregate if AMPDU frame. */
+ qos &= ~MWL8K_QOS_ACK_POLICY_MASK;
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_BLOCKACK);
+ qos |= MWL8K_QOS_ACK_POLICY_BLOCKACK;
else
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_NORMAL);
-
- if (qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
- qos = mwl8k_qos_setbit_amsdu(qos);
+ qos |= MWL8K_QOS_ACK_POLICY_NORMAL;
}
dma = pci_map_single(priv->pdev, skb->data,
@@ -1897,9 +1843,9 @@
}
/*
- * CMD_802_11_GET_STAT.
+ * CMD_GET_STAT.
*/
-struct mwl8k_cmd_802_11_get_stat {
+struct mwl8k_cmd_get_stat {
struct mwl8k_cmd_pkt header;
__le32 stats[64];
} __attribute__((packed));
@@ -1909,10 +1855,10 @@
#define MWL8K_STAT_FCS_ERROR 24
#define MWL8K_STAT_RTS_SUCCESS 11
-static int mwl8k_cmd_802_11_get_stat(struct ieee80211_hw *hw,
- struct ieee80211_low_level_stats *stats)
+static int mwl8k_cmd_get_stat(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats)
{
- struct mwl8k_cmd_802_11_get_stat *cmd;
+ struct mwl8k_cmd_get_stat *cmd;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -1939,9 +1885,9 @@
}
/*
- * CMD_802_11_RADIO_CONTROL.
+ * CMD_RADIO_CONTROL.
*/
-struct mwl8k_cmd_802_11_radio_control {
+struct mwl8k_cmd_radio_control {
struct mwl8k_cmd_pkt header;
__le16 action;
__le16 control;
@@ -1949,10 +1895,10 @@
} __attribute__((packed));
static int
-mwl8k_cmd_802_11_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
+mwl8k_cmd_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
{
struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_cmd_802_11_radio_control *cmd;
+ struct mwl8k_cmd_radio_control *cmd;
int rc;
if (enable == priv->radio_on && !force)
@@ -1977,36 +1923,32 @@
return rc;
}
-static int mwl8k_cmd_802_11_radio_disable(struct ieee80211_hw *hw)
+static int mwl8k_cmd_radio_disable(struct ieee80211_hw *hw)
{
- return mwl8k_cmd_802_11_radio_control(hw, 0, 0);
+ return mwl8k_cmd_radio_control(hw, 0, 0);
}
-static int mwl8k_cmd_802_11_radio_enable(struct ieee80211_hw *hw)
+static int mwl8k_cmd_radio_enable(struct ieee80211_hw *hw)
{
- return mwl8k_cmd_802_11_radio_control(hw, 1, 0);
+ return mwl8k_cmd_radio_control(hw, 1, 0);
}
static int
mwl8k_set_radio_preamble(struct ieee80211_hw *hw, bool short_preamble)
{
- struct mwl8k_priv *priv;
-
- if (hw == NULL || hw->priv == NULL)
- return -EINVAL;
- priv = hw->priv;
+ struct mwl8k_priv *priv = hw->priv;
priv->radio_short_preamble = short_preamble;
- return mwl8k_cmd_802_11_radio_control(hw, 1, 1);
+ return mwl8k_cmd_radio_control(hw, 1, 1);
}
/*
- * CMD_802_11_RF_TX_POWER.
+ * CMD_RF_TX_POWER.
*/
#define MWL8K_TX_POWER_LEVEL_TOTAL 8
-struct mwl8k_cmd_802_11_rf_tx_power {
+struct mwl8k_cmd_rf_tx_power {
struct mwl8k_cmd_pkt header;
__le16 action;
__le16 support_level;
@@ -2015,9 +1957,9 @@
__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
} __attribute__((packed));
-static int mwl8k_cmd_802_11_rf_tx_power(struct ieee80211_hw *hw, int dBm)
+static int mwl8k_cmd_rf_tx_power(struct ieee80211_hw *hw, int dBm)
{
- struct mwl8k_cmd_802_11_rf_tx_power *cmd;
+ struct mwl8k_cmd_rf_tx_power *cmd;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2159,6 +2101,171 @@
}
/*
+ * CMD_SET_AID.
+ */
+#define MWL8K_FRAME_PROT_DISABLED 0x00
+#define MWL8K_FRAME_PROT_11G 0x07
+#define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY 0x02
+#define MWL8K_FRAME_PROT_11N_HT_ALL 0x06
+
+struct mwl8k_cmd_update_set_aid {
+ struct mwl8k_cmd_pkt header;
+ __le16 aid;
+
+ /* AP's MAC address (BSSID) */
+ __u8 bssid[ETH_ALEN];
+ __le16 protection_mode;
+ __u8 supp_rates[14];
+} __attribute__((packed));
+
+static int
+mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
+ struct mwl8k_cmd_update_set_aid *cmd;
+ u16 prot_mode;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->aid = cpu_to_le16(vif->bss_conf.aid);
+
+ memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
+
+ if (vif->bss_conf.use_cts_prot) {
+ prot_mode = MWL8K_FRAME_PROT_11G;
+ } else {
+ switch (vif->bss_conf.ht_operation_mode &
+ IEEE80211_HT_OP_MODE_PROTECTION) {
+ case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
+ prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
+ break;
+ case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
+ prot_mode = MWL8K_FRAME_PROT_11N_HT_ALL;
+ break;
+ default:
+ prot_mode = MWL8K_FRAME_PROT_DISABLED;
+ break;
+ }
+ }
+ cmd->protection_mode = cpu_to_le16(prot_mode);
+
+ memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_SET_RATE.
+ */
+struct mwl8k_cmd_set_rate {
+ struct mwl8k_cmd_pkt header;
+ __u8 legacy_rates[14];
+
+ /* Bitmap for supported MCS codes. */
+ __u8 mcs_set[16];
+ __u8 reserved[16];
+} __attribute__((packed));
+
+static int
+mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct mwl8k_cmd_set_rate *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_FINALIZE_JOIN.
+ */
+#define MWL8K_FJ_BEACON_MAXLEN 128
+
+struct mwl8k_cmd_finalize_join {
+ struct mwl8k_cmd_pkt header;
+ __le32 sleep_interval; /* Number of beacon periods to sleep */
+ __u8 beacon_data[MWL8K_FJ_BEACON_MAXLEN];
+} __attribute__((packed));
+
+static int mwl8k_cmd_finalize_join(struct ieee80211_hw *hw, void *frame,
+ int framelen, int dtim)
+{
+ struct mwl8k_cmd_finalize_join *cmd;
+ struct ieee80211_mgmt *payload = frame;
+ int payload_len;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_FINALIZE_JOIN);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
+
+ payload_len = framelen - ieee80211_hdrlen(payload->frame_control);
+ if (payload_len < 0)
+ payload_len = 0;
+ else if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
+ payload_len = MWL8K_FJ_BEACON_MAXLEN;
+
+ memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_SET_RTS_THRESHOLD.
+ */
+struct mwl8k_cmd_set_rts_threshold {
+ struct mwl8k_cmd_pkt header;
+ __le16 action;
+ __le16 threshold;
+} __attribute__((packed));
+
+static int mwl8k_cmd_set_rts_threshold(struct ieee80211_hw *hw,
+ u16 action, u16 threshold)
+{
+ struct mwl8k_cmd_set_rts_threshold *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->action = cpu_to_le16(action);
+ cmd->threshold = cpu_to_le16(threshold);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
* CMD_SET_SLOT.
*/
struct mwl8k_cmd_set_slot {
@@ -2188,194 +2295,6 @@
}
/*
- * CMD_MIMO_CONFIG.
- */
-struct mwl8k_cmd_mimo_config {
- struct mwl8k_cmd_pkt header;
- __le32 action;
- __u8 rx_antenna_map;
- __u8 tx_antenna_map;
-} __attribute__((packed));
-
-static int mwl8k_cmd_mimo_config(struct ieee80211_hw *hw, __u8 rx, __u8 tx)
-{
- struct mwl8k_cmd_mimo_config *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_MIMO_CONFIG);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = cpu_to_le32((u32)MWL8K_CMD_SET);
- cmd->rx_antenna_map = rx;
- cmd->tx_antenna_map = tx;
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-/*
- * CMD_ENABLE_SNIFFER.
- */
-struct mwl8k_cmd_enable_sniffer {
- struct mwl8k_cmd_pkt header;
- __le32 action;
-} __attribute__((packed));
-
-static int mwl8k_enable_sniffer(struct ieee80211_hw *hw, bool enable)
-{
- struct mwl8k_cmd_enable_sniffer *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_ENABLE_SNIFFER);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = cpu_to_le32(!!enable);
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-/*
- * CMD_SET_MAC_ADDR.
- */
-struct mwl8k_cmd_set_mac_addr {
- struct mwl8k_cmd_pkt header;
- union {
- struct {
- __le16 mac_type;
- __u8 mac_addr[ETH_ALEN];
- } mbss;
- __u8 mac_addr[ETH_ALEN];
- };
-} __attribute__((packed));
-
-static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
-{
- struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_cmd_set_mac_addr *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- if (priv->ap_fw) {
- cmd->mbss.mac_type = 0;
- memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
- } else {
- memcpy(cmd->mac_addr, mac, ETH_ALEN);
- }
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-
-/*
- * CMD_SET_RATEADAPT_MODE.
- */
-struct mwl8k_cmd_set_rate_adapt_mode {
- struct mwl8k_cmd_pkt header;
- __le16 action;
- __le16 mode;
-} __attribute__((packed));
-
-static int mwl8k_cmd_setrateadaptmode(struct ieee80211_hw *hw, __u16 mode)
-{
- struct mwl8k_cmd_set_rate_adapt_mode *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATEADAPT_MODE);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = cpu_to_le16(MWL8K_CMD_SET);
- cmd->mode = cpu_to_le16(mode);
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-/*
- * CMD_SET_WMM_MODE.
- */
-struct mwl8k_cmd_set_wmm {
- struct mwl8k_cmd_pkt header;
- __le16 action;
-} __attribute__((packed));
-
-static int mwl8k_set_wmm(struct ieee80211_hw *hw, bool enable)
-{
- struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_cmd_set_wmm *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_WMM_MODE);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = cpu_to_le16(!!enable);
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- if (!rc)
- priv->wmm_enabled = enable;
-
- return rc;
-}
-
-/*
- * CMD_SET_RTS_THRESHOLD.
- */
-struct mwl8k_cmd_rts_threshold {
- struct mwl8k_cmd_pkt header;
- __le16 action;
- __le16 threshold;
-} __attribute__((packed));
-
-static int mwl8k_rts_threshold(struct ieee80211_hw *hw,
- u16 action, u16 threshold)
-{
- struct mwl8k_cmd_rts_threshold *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = cpu_to_le16(action);
- cmd->threshold = cpu_to_le16(threshold);
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-/*
* CMD_SET_EDCA_PARAMS.
*/
struct mwl8k_cmd_set_edca_params {
@@ -2426,9 +2345,9 @@
MWL8K_SET_EDCA_AIFS)
static int
-mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
- __u16 cw_min, __u16 cw_max,
- __u8 aifs, __u16 txop)
+mwl8k_cmd_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
+ __u16 cw_min, __u16 cw_max,
+ __u8 aifs, __u16 txop)
{
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_cmd_set_edca_params *cmd;
@@ -2467,202 +2386,60 @@
}
/*
- * CMD_FINALIZE_JOIN.
+ * CMD_SET_WMM_MODE.
*/
-#define MWL8K_FJ_BEACON_MAXLEN 128
-
-struct mwl8k_cmd_finalize_join {
+struct mwl8k_cmd_set_wmm_mode {
struct mwl8k_cmd_pkt header;
- __le32 sleep_interval; /* Number of beacon periods to sleep */
- __u8 beacon_data[MWL8K_FJ_BEACON_MAXLEN];
+ __le16 action;
} __attribute__((packed));
-static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame,
- int framelen, int dtim)
+static int mwl8k_cmd_set_wmm_mode(struct ieee80211_hw *hw, bool enable)
{
- struct mwl8k_cmd_finalize_join *cmd;
- struct ieee80211_mgmt *payload = frame;
- int payload_len;
+ struct mwl8k_priv *priv = hw->priv;
+ struct mwl8k_cmd_set_wmm_mode *cmd;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
return -ENOMEM;
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_FINALIZE_JOIN);
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_WMM_MODE);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
-
- payload_len = framelen - ieee80211_hdrlen(payload->frame_control);
- if (payload_len < 0)
- payload_len = 0;
- else if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
- payload_len = MWL8K_FJ_BEACON_MAXLEN;
-
- memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
+ cmd->action = cpu_to_le16(!!enable);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
+ if (!rc)
+ priv->wmm_enabled = enable;
+
return rc;
}
/*
- * CMD_UPDATE_STADB.
+ * CMD_MIMO_CONFIG.
*/
-struct mwl8k_cmd_update_sta_db {
+struct mwl8k_cmd_mimo_config {
struct mwl8k_cmd_pkt header;
-
- /* See STADB_ACTION_TYPE */
- __le32 action;
-
- /* Peer MAC address */
- __u8 peer_addr[ETH_ALEN];
-
- __le32 reserved;
-
- /* Peer info - valid during add/update. */
- struct peer_capability_info peer_info;
+ __le32 action;
+ __u8 rx_antenna_map;
+ __u8 tx_antenna_map;
} __attribute__((packed));
-static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif, __u32 action)
+static int mwl8k_cmd_mimo_config(struct ieee80211_hw *hw, __u8 rx, __u8 tx)
{
- struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
- struct ieee80211_bss_conf *info = &mv_vif->bss_info;
- struct mwl8k_cmd_update_sta_db *cmd;
- struct peer_capability_info *peer_info;
+ struct mwl8k_cmd_mimo_config *cmd;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
return -ENOMEM;
- cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_MIMO_CONFIG);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
- cmd->action = cpu_to_le32(action);
- peer_info = &cmd->peer_info;
- memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
-
- switch (action) {
- case MWL8K_STA_DB_ADD_ENTRY:
- case MWL8K_STA_DB_MODIFY_ENTRY:
- /* Build peer_info block */
- peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
- peer_info->basic_caps = cpu_to_le16(info->assoc_capability);
- memcpy(peer_info->legacy_rates, mwl8k_rateids,
- sizeof(mwl8k_rateids));
- peer_info->interop = 1;
- peer_info->amsdu_enabled = 0;
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- if (rc == 0)
- mv_vif->peer_id = peer_info->station_id;
-
- break;
-
- case MWL8K_STA_DB_DEL_ENTRY:
- case MWL8K_STA_DB_FLUSH:
- default:
- rc = mwl8k_post_cmd(hw, &cmd->header);
- if (rc == 0)
- mv_vif->peer_id = 0;
- break;
- }
- kfree(cmd);
-
- return rc;
-}
-
-/*
- * CMD_SET_AID.
- */
-#define MWL8K_FRAME_PROT_DISABLED 0x00
-#define MWL8K_FRAME_PROT_11G 0x07
-#define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY 0x02
-#define MWL8K_FRAME_PROT_11N_HT_ALL 0x06
-
-struct mwl8k_cmd_update_set_aid {
- struct mwl8k_cmd_pkt header;
- __le16 aid;
-
- /* AP's MAC address (BSSID) */
- __u8 bssid[ETH_ALEN];
- __le16 protection_mode;
- __u8 supp_rates[14];
-} __attribute__((packed));
-
-static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
- struct ieee80211_bss_conf *info = &mv_vif->bss_info;
- struct mwl8k_cmd_update_set_aid *cmd;
- u16 prot_mode;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->aid = cpu_to_le16(info->aid);
-
- memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
-
- if (info->use_cts_prot) {
- prot_mode = MWL8K_FRAME_PROT_11G;
- } else {
- switch (info->ht_operation_mode &
- IEEE80211_HT_OP_MODE_PROTECTION) {
- case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
- prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
- break;
- case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
- prot_mode = MWL8K_FRAME_PROT_11N_HT_ALL;
- break;
- default:
- prot_mode = MWL8K_FRAME_PROT_DISABLED;
- break;
- }
- }
- cmd->protection_mode = cpu_to_le16(prot_mode);
-
- memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
-
- rc = mwl8k_post_cmd(hw, &cmd->header);
- kfree(cmd);
-
- return rc;
-}
-
-/*
- * CMD_SET_RATE.
- */
-struct mwl8k_cmd_update_rateset {
- struct mwl8k_cmd_pkt header;
- __u8 legacy_rates[14];
-
- /* Bitmap for supported MCS codes. */
- __u8 mcs_set[16];
- __u8 reserved[16];
-} __attribute__((packed));
-
-static int mwl8k_update_rateset(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct mwl8k_cmd_update_rateset *cmd;
- int rc;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
- cmd->header.length = cpu_to_le16(sizeof(*cmd));
- memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+ cmd->action = cpu_to_le32((u32)MWL8K_CMD_SET);
+ cmd->rx_antenna_map = rx;
+ cmd->tx_antenna_map = tx;
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
@@ -2755,6 +2532,169 @@
return rc;
}
+/*
+ * CMD_ENABLE_SNIFFER.
+ */
+struct mwl8k_cmd_enable_sniffer {
+ struct mwl8k_cmd_pkt header;
+ __le32 action;
+} __attribute__((packed));
+
+static int mwl8k_cmd_enable_sniffer(struct ieee80211_hw *hw, bool enable)
+{
+ struct mwl8k_cmd_enable_sniffer *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_ENABLE_SNIFFER);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->action = cpu_to_le32(!!enable);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_SET_MAC_ADDR.
+ */
+struct mwl8k_cmd_set_mac_addr {
+ struct mwl8k_cmd_pkt header;
+ union {
+ struct {
+ __le16 mac_type;
+ __u8 mac_addr[ETH_ALEN];
+ } mbss;
+ __u8 mac_addr[ETH_ALEN];
+ };
+} __attribute__((packed));
+
+static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+{
+ struct mwl8k_priv *priv = hw->priv;
+ struct mwl8k_cmd_set_mac_addr *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ if (priv->ap_fw) {
+ cmd->mbss.mac_type = 0;
+ memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
+ } else {
+ memcpy(cmd->mac_addr, mac, ETH_ALEN);
+ }
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_SET_RATEADAPT_MODE.
+ */
+struct mwl8k_cmd_set_rate_adapt_mode {
+ struct mwl8k_cmd_pkt header;
+ __le16 action;
+ __le16 mode;
+} __attribute__((packed));
+
+static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
+{
+ struct mwl8k_cmd_set_rate_adapt_mode *cmd;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATEADAPT_MODE);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+ cmd->action = cpu_to_le16(MWL8K_CMD_SET);
+ cmd->mode = cpu_to_le16(mode);
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ kfree(cmd);
+
+ return rc;
+}
+
+/*
+ * CMD_UPDATE_STADB.
+ */
+struct mwl8k_cmd_update_stadb {
+ struct mwl8k_cmd_pkt header;
+
+ /* See STADB_ACTION_TYPE */
+ __le32 action;
+
+ /* Peer MAC address */
+ __u8 peer_addr[ETH_ALEN];
+
+ __le32 reserved;
+
+ /* Peer info - valid during add/update. */
+ struct peer_capability_info peer_info;
+} __attribute__((packed));
+
+static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, __u32 action)
+{
+ struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
+ struct mwl8k_cmd_update_stadb *cmd;
+ struct peer_capability_info *peer_info;
+ int rc;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
+ cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+ cmd->action = cpu_to_le32(action);
+ peer_info = &cmd->peer_info;
+ memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
+
+ switch (action) {
+ case MWL8K_STA_DB_ADD_ENTRY:
+ case MWL8K_STA_DB_MODIFY_ENTRY:
+ /* Build peer_info block */
+ peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
+ peer_info->basic_caps =
+ cpu_to_le16(vif->bss_conf.assoc_capability);
+ memcpy(peer_info->legacy_rates, mwl8k_rateids,
+ sizeof(mwl8k_rateids));
+ peer_info->interop = 1;
+ peer_info->amsdu_enabled = 0;
+
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ if (rc == 0)
+ mv_vif->peer_id = peer_info->station_id;
+
+ break;
+
+ case MWL8K_STA_DB_DEL_ENTRY:
+ case MWL8K_STA_DB_FLUSH:
+ default:
+ rc = mwl8k_post_cmd(hw, &cmd->header);
+ if (rc == 0)
+ mv_vif->peer_id = 0;
+ break;
+ }
+ kfree(cmd);
+
+ return rc;
+}
+
/*
* Interrupt handling.
@@ -2836,11 +2776,11 @@
rc = mwl8k_fw_lock(hw);
if (!rc) {
- rc = mwl8k_cmd_802_11_radio_enable(hw);
+ rc = mwl8k_cmd_radio_enable(hw);
if (!priv->ap_fw) {
if (!rc)
- rc = mwl8k_enable_sniffer(hw, 0);
+ rc = mwl8k_cmd_enable_sniffer(hw, 0);
if (!rc)
rc = mwl8k_cmd_set_pre_scan(hw);
@@ -2851,10 +2791,10 @@
}
if (!rc)
- rc = mwl8k_cmd_setrateadaptmode(hw, 0);
+ rc = mwl8k_cmd_set_rateadapt_mode(hw, 0);
if (!rc)
- rc = mwl8k_set_wmm(hw, 0);
+ rc = mwl8k_cmd_set_wmm_mode(hw, 0);
mwl8k_fw_unlock(hw);
}
@@ -2873,7 +2813,7 @@
struct mwl8k_priv *priv = hw->priv;
int i;
- mwl8k_cmd_802_11_radio_disable(hw);
+ mwl8k_cmd_radio_disable(hw);
ieee80211_stop_queues(hw);
@@ -2895,7 +2835,7 @@
}
static int mwl8k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_vif *mwl8k_vif;
@@ -2909,7 +2849,7 @@
/*
* We only support managed interfaces for now.
*/
- if (conf->type != NL80211_IFTYPE_STATION)
+ if (vif->type != NL80211_IFTYPE_STATION)
return -EINVAL;
/*
@@ -2925,34 +2865,31 @@
}
/* Clean out driver private area */
- mwl8k_vif = MWL8K_VIF(conf->vif);
+ mwl8k_vif = MWL8K_VIF(vif);
memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
/* Set and save the mac address */
- mwl8k_set_mac_addr(hw, conf->mac_addr);
- memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
-
- /* Back pointer to parent config block */
- mwl8k_vif->priv = priv;
+ mwl8k_cmd_set_mac_addr(hw, vif->addr);
+ memcpy(mwl8k_vif->mac_addr, vif->addr, ETH_ALEN);
/* Set Initial sequence number to zero */
mwl8k_vif->seqno = 0;
- priv->vif = conf->vif;
+ priv->vif = vif;
priv->current_channel = NULL;
return 0;
}
static void mwl8k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct mwl8k_priv *priv = hw->priv;
if (priv->vif == NULL)
return;
- mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+ mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
priv->vif = NULL;
}
@@ -2964,7 +2901,7 @@
int rc;
if (conf->flags & IEEE80211_CONF_IDLE) {
- mwl8k_cmd_802_11_radio_disable(hw);
+ mwl8k_cmd_radio_disable(hw);
priv->current_channel = NULL;
return 0;
}
@@ -2973,7 +2910,7 @@
if (rc)
return rc;
- rc = mwl8k_cmd_802_11_radio_enable(hw);
+ rc = mwl8k_cmd_radio_enable(hw);
if (rc)
goto out;
@@ -2985,7 +2922,7 @@
if (conf->power_level > 18)
conf->power_level = 18;
- rc = mwl8k_cmd_802_11_rf_tx_power(hw, conf->power_level);
+ rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level);
if (rc)
goto out;
@@ -3021,14 +2958,11 @@
if (rc)
return;
- if (info->assoc) {
- memcpy(&mwl8k_vif->bss_info, info,
- sizeof(struct ieee80211_bss_conf));
-
- memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
+ if (vif->bss_conf.assoc) {
+ memcpy(mwl8k_vif->bssid, vif->bss_conf.bssid, ETH_ALEN);
/* Install rates */
- rc = mwl8k_update_rateset(hw, vif);
+ rc = mwl8k_cmd_set_rate(hw, vif);
if (rc)
goto out;
@@ -3039,17 +2973,18 @@
goto out;
/* Set radio preamble */
- rc = mwl8k_set_radio_preamble(hw, info->use_short_preamble);
+ rc = mwl8k_set_radio_preamble(hw,
+ vif->bss_conf.use_short_preamble);
if (rc)
goto out;
/* Set slot time */
- rc = mwl8k_cmd_set_slot(hw, info->use_short_slot);
+ rc = mwl8k_cmd_set_slot(hw, vif->bss_conf.use_short_slot);
if (rc)
goto out;
/* Update peer rate info */
- rc = mwl8k_cmd_update_sta_db(hw, vif,
+ rc = mwl8k_cmd_update_stadb(hw, vif,
MWL8K_STA_DB_MODIFY_ENTRY);
if (rc)
goto out;
@@ -3066,9 +3001,7 @@
memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
priv->capture_beacon = true;
} else {
- rc = mwl8k_cmd_update_sta_db(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
- memset(&mwl8k_vif->bss_info, 0,
- sizeof(struct ieee80211_bss_conf));
+ rc = mwl8k_cmd_update_stadb(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
memset(mwl8k_vif->bssid, 0, ETH_ALEN);
}
@@ -3114,7 +3047,7 @@
}
if (!priv->sniffer_enabled) {
- if (mwl8k_enable_sniffer(hw, 1))
+ if (mwl8k_cmd_enable_sniffer(hw, 1))
return 0;
priv->sniffer_enabled = true;
}
@@ -3161,7 +3094,7 @@
return;
if (priv->sniffer_enabled) {
- mwl8k_enable_sniffer(hw, 0);
+ mwl8k_cmd_enable_sniffer(hw, 0);
priv->sniffer_enabled = false;
}
@@ -3211,7 +3144,7 @@
static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
- return mwl8k_rts_threshold(hw, MWL8K_CMD_SET, value);
+ return mwl8k_cmd_set_rts_threshold(hw, MWL8K_CMD_SET, value);
}
static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
@@ -3223,14 +3156,14 @@
rc = mwl8k_fw_lock(hw);
if (!rc) {
if (!priv->wmm_enabled)
- rc = mwl8k_set_wmm(hw, 1);
+ rc = mwl8k_cmd_set_wmm_mode(hw, 1);
if (!rc)
- rc = mwl8k_set_edca_params(hw, queue,
- params->cw_min,
- params->cw_max,
- params->aifs,
- params->txop);
+ rc = mwl8k_cmd_set_edca_params(hw, queue,
+ params->cw_min,
+ params->cw_max,
+ params->aifs,
+ params->txop);
mwl8k_fw_unlock(hw);
}
@@ -3259,7 +3192,7 @@
static int mwl8k_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
- return mwl8k_cmd_802_11_get_stat(hw, stats);
+ return mwl8k_cmd_get_stat(hw, stats);
}
static const struct ieee80211_ops mwl8k_ops = {
@@ -3300,9 +3233,9 @@
struct mwl8k_priv *priv =
container_of(work, struct mwl8k_priv, finalize_join_worker);
struct sk_buff *skb = priv->beacon_skb;
- u8 dtim = MWL8K_VIF(priv->vif)->bss_info.dtim_period;
- mwl8k_finalize_join(priv->hw, skb->data, skb->len, dtim);
+ mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len,
+ priv->vif->bss_conf.dtim_period);
dev_kfree_skb(skb);
priv->beacon_skb = NULL;
@@ -3314,19 +3247,16 @@
};
static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
- {
+ [MWL8687] = {
.part_name = "88w8687",
.helper_image = "mwl8k/helper_8687.fw",
.fw_image = "mwl8k/fmimage_8687.fw",
- .rxd_ops = &rxd_8687_ops,
- .modes = BIT(NL80211_IFTYPE_STATION),
},
- {
+ [MWL8366] = {
.part_name = "88w8366",
.helper_image = "mwl8k/helper_8366.fw",
.fw_image = "mwl8k/fmimage_8366.fw",
- .rxd_ops = &rxd_8366_ops,
- .modes = 0,
+ .ap_rxd_ops = &rxd_8366_ap_ops,
},
};
@@ -3352,6 +3282,7 @@
printed_version = 1;
}
+
rc = pci_enable_device(pdev);
if (rc) {
printk(KERN_ERR "%s: Cannot enable new PCI device\n",
@@ -3368,6 +3299,7 @@
pci_set_master(pdev);
+
hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops);
if (hw == NULL) {
printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
@@ -3375,17 +3307,14 @@
goto err_free_reg;
}
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+ pci_set_drvdata(pdev, hw);
+
priv = hw->priv;
priv->hw = hw;
priv->pdev = pdev;
priv->device_info = &mwl8k_info_tbl[id->driver_data];
- priv->rxd_ops = priv->device_info->rxd_ops;
- priv->sniffer_enabled = false;
- priv->wmm_enabled = false;
- priv->pending_tx_pkts = 0;
- SET_IEEE80211_DEV(hw, &pdev->dev);
- pci_set_drvdata(pdev, hw);
priv->sram = pci_iomap(pdev, 0, 0x10000);
if (priv->sram == NULL) {
@@ -3408,6 +3337,40 @@
}
}
+
+ /* Reset firmware and hardware */
+ mwl8k_hw_reset(priv);
+
+ /* Ask userland hotplug daemon for the device firmware */
+ rc = mwl8k_request_firmware(priv);
+ if (rc) {
+ printk(KERN_ERR "%s: Firmware files not found\n",
+ wiphy_name(hw->wiphy));
+ goto err_stop_firmware;
+ }
+
+ /* Load firmware into hardware */
+ rc = mwl8k_load_firmware(hw);
+ if (rc) {
+ printk(KERN_ERR "%s: Cannot start firmware\n",
+ wiphy_name(hw->wiphy));
+ goto err_stop_firmware;
+ }
+
+ /* Reclaim memory once firmware is successfully loaded */
+ mwl8k_release_firmware(priv);
+
+
+ if (priv->ap_fw)
+ priv->rxd_ops = priv->device_info->ap_rxd_ops;
+ else
+ priv->rxd_ops = &rxd_sta_ops;
+
+ priv->sniffer_enabled = false;
+ priv->wmm_enabled = false;
+ priv->pending_tx_pkts = 0;
+
+
memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
priv->band.band = IEEE80211_BAND_2GHZ;
priv->band.channels = priv->channels;
@@ -3430,8 +3393,6 @@
hw->queues = MWL8K_TX_QUEUES;
- hw->wiphy->interface_modes = priv->device_info->modes;
-
/* Set rssi and noise values to dBm */
hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
hw->vif_data_size = sizeof(struct mwl8k_vif);
@@ -3452,11 +3413,11 @@
/* Power management cookie */
priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
if (priv->cookie == NULL)
- goto err_iounmap;
+ goto err_stop_firmware;
rc = mwl8k_rxq_init(hw, 0);
if (rc)
- goto err_iounmap;
+ goto err_free_cookie;
rxq_refill(hw, 0, INT_MAX);
mutex_init(&priv->fw_mutex);
@@ -3487,28 +3448,6 @@
goto err_free_queues;
}
- /* Reset firmware and hardware */
- mwl8k_hw_reset(priv);
-
- /* Ask userland hotplug daemon for the device firmware */
- rc = mwl8k_request_firmware(priv);
- if (rc) {
- printk(KERN_ERR "%s: Firmware files not found\n",
- wiphy_name(hw->wiphy));
- goto err_free_irq;
- }
-
- /* Load firmware into hardware */
- rc = mwl8k_load_firmware(hw);
- if (rc) {
- printk(KERN_ERR "%s: Cannot start firmware\n",
- wiphy_name(hw->wiphy));
- goto err_stop_firmware;
- }
-
- /* Reclaim memory once firmware is successfully loaded */
- mwl8k_release_firmware(priv);
-
/*
* Temporarily enable interrupts. Initial firmware host
* commands use interrupts and avoids polling. Disable
@@ -3523,26 +3462,28 @@
rc = mwl8k_cmd_set_hw_spec(hw);
} else {
rc = mwl8k_cmd_get_hw_spec_sta(hw);
+
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
}
if (rc) {
printk(KERN_ERR "%s: Cannot initialise firmware\n",
wiphy_name(hw->wiphy));
- goto err_stop_firmware;
+ goto err_free_irq;
}
/* Turn radio off */
- rc = mwl8k_cmd_802_11_radio_disable(hw);
+ rc = mwl8k_cmd_radio_disable(hw);
if (rc) {
printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
- goto err_stop_firmware;
+ goto err_free_irq;
}
/* Clear MAC address */
- rc = mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+ rc = mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
if (rc) {
printk(KERN_ERR "%s: Cannot clear MAC address\n",
wiphy_name(hw->wiphy));
- goto err_stop_firmware;
+ goto err_free_irq;
}
/* Disable interrupts */
@@ -3553,7 +3494,7 @@
if (rc) {
printk(KERN_ERR "%s: Cannot register device\n",
wiphy_name(hw->wiphy));
- goto err_stop_firmware;
+ goto err_free_irq;
}
printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
@@ -3565,10 +3506,6 @@
return 0;
-err_stop_firmware:
- mwl8k_hw_reset(priv);
- mwl8k_release_firmware(priv);
-
err_free_irq:
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
free_irq(priv->pdev->irq, hw);
@@ -3578,11 +3515,16 @@
mwl8k_txq_deinit(hw, i);
mwl8k_rxq_deinit(hw, 0);
-err_iounmap:
+err_free_cookie:
if (priv->cookie != NULL)
pci_free_consistent(priv->pdev, 4,
priv->cookie, priv->cookie_dma);
+err_stop_firmware:
+ mwl8k_hw_reset(priv);
+ mwl8k_release_firmware(priv);
+
+err_iounmap:
if (priv->regs != NULL)
pci_iounmap(pdev, priv->regs);
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 7698fdd..31ca241 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -23,7 +23,7 @@
#define MAX_RID_LEN 1024
/* Helper routine to record keys
- * Do not call from interrupt context */
+ * It is called under orinoco_lock so it may not sleep */
static int orinoco_set_key(struct orinoco_private *priv, int index,
enum orinoco_alg alg, const u8 *key, int key_len,
const u8 *seq, int seq_len)
@@ -32,14 +32,14 @@
kzfree(priv->keys[index].seq);
if (key_len) {
- priv->keys[index].key = kzalloc(key_len, GFP_KERNEL);
+ priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC);
if (!priv->keys[index].key)
goto nomem;
} else
priv->keys[index].key = NULL;
if (seq_len) {
- priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL);
+ priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC);
if (!priv->keys[index].seq)
goto free_key;
} else
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 18012db..26428e4 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -216,7 +216,7 @@
}
static int p54_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct p54_common *priv = dev->priv;
@@ -226,28 +226,28 @@
return -EOPNOTSUPP;
}
- priv->vif = conf->vif;
+ priv->vif = vif;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
- priv->mode = conf->type;
+ priv->mode = vif->type;
break;
default:
mutex_unlock(&priv->conf_mutex);
return -EOPNOTSUPP;
}
- memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+ memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
p54_setup_mac(priv);
mutex_unlock(&priv->conf_mutex);
return 0;
}
static void p54_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct p54_common *priv = dev->priv;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bf60689..3ca824a 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -54,12 +54,12 @@
When compiled as a module, this driver will be called rt61pci.
config RT2800PCI_PCI
- tristate
+ boolean
depends on PCI
default y
config RT2800PCI_SOC
- tristate
+ boolean
depends on RALINK_RT288X || RALINK_RT305X
default y
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index e7f4640..d86d233 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -451,7 +451,7 @@
/*
* RF2420 chipset don't need any additional actions.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2420))
+ if (rt2x00_rf(rt2x00dev, RF2420))
return;
/*
@@ -1343,8 +1343,7 @@
rt2x00_set_chip_rf(rt2x00dev, value, reg);
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
+ if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 408fcfc..46cbc6e 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -440,8 +440,7 @@
/*
* RT2525E and RT5222 need to flip TX I/Q
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
- rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1);
rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1);
@@ -449,7 +448,7 @@
/*
* RT2525E does not need RX I/Q Flip.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+ if (rt2x00_rf(rt2x00dev, RF2525E))
rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
} else {
rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0);
@@ -475,14 +474,14 @@
* Switch on tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
- if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
+ if (!rt2x00_rf(rt2x00dev, RF2523))
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
/*
* For RT2525 we should first set the channel to half band higher.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ if (rt2x00_rf(rt2x00dev, RF2525)) {
static const u32 vals[] = {
0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
@@ -516,7 +515,7 @@
* Switch off tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
- if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ if (!rt2x00_rf(rt2x00dev, RF2523)) {
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
}
@@ -640,7 +639,7 @@
* up to version C the link tuning should halt after 20
* seconds while being associated.
*/
- if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
+ if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
rt2x00dev->intf_associated && count > 20)
return;
@@ -650,7 +649,7 @@
* should go straight to dynamic CCA tuning when they
* are not associated.
*/
- if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
+ if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
!rt2x00dev->intf_associated)
goto dynamic_cca_tune;
@@ -1507,12 +1506,12 @@
rt2x00_set_chip_rf(rt2x00dev, value, reg);
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ if (!rt2x00_rf(rt2x00dev, RF2522) &&
+ !rt2x00_rf(rt2x00dev, RF2523) &&
+ !rt2x00_rf(rt2x00dev, RF2524) &&
+ !rt2x00_rf(rt2x00dev, RF2525) &&
+ !rt2x00_rf(rt2x00dev, RF2525E) &&
+ !rt2x00_rf(rt2x00dev, RF5222)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -1744,22 +1743,22 @@
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+ if (rt2x00_rf(rt2x00dev, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->channels = rf_vals_bg_2522;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2523)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
spec->channels = rf_vals_bg_2523;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2524)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
spec->channels = rf_vals_bg_2524;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
spec->channels = rf_vals_bg_2525;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ } else if (rt2x00_rf(rt2x00dev, RF5222)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 83f2592..9e6f865 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -565,8 +565,7 @@
/*
* RT2525E and RT5222 need to flip TX I/Q
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
- rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
@@ -574,7 +573,7 @@
/*
* RT2525E does not need RX I/Q Flip.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+ if (rt2x00_rf(rt2x00dev, RF2525E))
rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
} else {
rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
@@ -598,7 +597,7 @@
/*
* For RT2525E we should first set the channel to half band higher.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ if (rt2x00_rf(rt2x00dev, RF2525E)) {
static const u32 vals[] = {
0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
@@ -793,7 +792,7 @@
rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1);
rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
- if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
+ if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) {
rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®);
rt2x00_set_field16(®, PHY_CSR2_LNA, 0);
} else {
@@ -1411,19 +1410,18 @@
rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
- rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
-
+ if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0) ||
+ rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
- if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ if (!rt2x00_rf(rt2x00dev, RF2522) &&
+ !rt2x00_rf(rt2x00dev, RF2523) &&
+ !rt2x00_rf(rt2x00dev, RF2524) &&
+ !rt2x00_rf(rt2x00dev, RF2525) &&
+ !rt2x00_rf(rt2x00dev, RF2525E) &&
+ !rt2x00_rf(rt2x00dev, RF5222)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -1667,22 +1665,22 @@
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+ if (rt2x00_rf(rt2x00dev, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->channels = rf_vals_bg_2522;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2523)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
spec->channels = rf_vals_bg_2523;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2524)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
spec->channels = rf_vals_bg_2524;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
spec->channels = rf_vals_bg_2525;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ } else if (rt2x00_rf(rt2x00dev, RF5222)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 27bf887..8ff7db8 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -37,7 +37,7 @@
#include <linux/module.h>
#include "rt2x00.h"
-#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
+#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
#include "rt2x00usb.h"
#endif
#include "rt2800lib.h"
@@ -220,8 +220,7 @@
/*
* RT2880 and RT3052 don't support MCU requests.
*/
- if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
- rt2x00_rt(&rt2x00dev->chip, RT3052))
+ if (rt2x00_rt(rt2x00dev, RT2880) || rt2x00_rt(rt2x00dev, RT3052))
return;
mutex_lock(&rt2x00dev->csr_mutex);
@@ -806,12 +805,12 @@
unsigned int tx_pin;
u8 bbp;
- if ((rt2x00_rt(&rt2x00dev->chip, RT3070) ||
- rt2x00_rt(&rt2x00dev->chip, RT3090)) &&
- (rt2x00_rf(&rt2x00dev->chip, RF2020) ||
- rt2x00_rf(&rt2x00dev->chip, RF3020) ||
- rt2x00_rf(&rt2x00dev->chip, RF3021) ||
- rt2x00_rf(&rt2x00dev->chip, RF3022)))
+ if ((rt2x00_rt(rt2x00dev, RT3070) ||
+ rt2x00_rt(rt2x00dev, RT3090)) &&
+ (rt2x00_rf(rt2x00dev, RF2020) ||
+ rt2x00_rf(rt2x00dev, RF3020) ||
+ rt2x00_rf(rt2x00dev, RF3021) ||
+ rt2x00_rf(rt2x00dev, RF3022)))
rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info);
else
rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info);
@@ -878,7 +877,7 @@
rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
rt2800_bbp_write(rt2x00dev, 3, bbp);
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
if (conf_is_ht40(conf)) {
rt2800_bbp_write(rt2x00dev, 69, 0x1a);
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
@@ -1041,7 +1040,7 @@
{
if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+ rt2x00_rev(rt2x00dev) == RT3070_VERSION)
return 0x1c + (2 * rt2x00dev->lna_gain);
else
return 0x2e + rt2x00dev->lna_gain;
@@ -1072,7 +1071,7 @@
void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
const u32 count)
{
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION)
return;
/*
@@ -1121,7 +1120,7 @@
if (rt2x00_intf_is_usb(rt2x00dev)) {
rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
+#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
USB_MODE_RESET, REGISTER_TIMEOUT);
#endif
@@ -1158,7 +1157,7 @@
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -1185,8 +1184,8 @@
rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®);
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
- if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
- rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+ if (rt2x00_rev(rt2x00dev) >= RT2880E_VERSION &&
+ rt2x00_rev(rt2x00dev) < RT3070_VERSION)
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
else
rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
@@ -1465,22 +1464,22 @@
rt2800_bbp_write(rt2x00dev, 103, 0x00);
rt2800_bbp_write(rt2x00dev, 105, 0x05);
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
rt2800_bbp_write(rt2x00dev, 69, 0x16);
rt2800_bbp_write(rt2x00dev, 73, 0x12);
}
- if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+ if (rt2x00_rev(rt2x00dev) > RT2860D_VERSION)
rt2800_bbp_write(rt2x00dev, 84, 0x19);
if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
rt2800_bbp_write(rt2x00dev, 84, 0x99);
rt2800_bbp_write(rt2x00dev, 105, 0x05);
}
- if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+ if (rt2x00_rt(rt2x00dev, RT3052)) {
rt2800_bbp_write(rt2x00dev, 31, 0x08);
rt2800_bbp_write(rt2x00dev, 78, 0x0e);
rt2800_bbp_write(rt2x00dev, 80, 0x08);
@@ -1566,13 +1565,13 @@
u8 bbp;
if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ rt2x00_rev(rt2x00dev) != RT3070_VERSION)
return 0;
if (rt2x00_intf_is_pci(rt2x00dev)) {
- if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3022))
+ if (!rt2x00_rf(rt2x00dev, RF3020) &&
+ !rt2x00_rf(rt2x00dev, RF3021) &&
+ !rt2x00_rf(rt2x00dev, RF3022))
return 0;
}
@@ -1737,7 +1736,7 @@
rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
- } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+ } else if (rt2x00_rev(rt2x00dev) < RT2883_VERSION) {
/*
* There is a max of 2 RX streams for RT28x0 series
*/
@@ -1839,17 +1838,15 @@
rt2x00_set_chip_rf(rt2x00dev, value, reg);
if (rt2x00_intf_is_usb(rt2x00dev)) {
- struct rt2x00_chip *chip = &rt2x00dev->chip;
-
/*
* The check for rt2860 is not a typo, some rt2870 hardware
* identifies itself as rt2860 in the CSR register.
*/
- if (rt2x00_check_rev(chip, 0xfff00000, 0x28600000) ||
- rt2x00_check_rev(chip, 0xfff00000, 0x28700000) ||
- rt2x00_check_rev(chip, 0xfff00000, 0x28800000)) {
+ if (rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28600000) ||
+ rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28700000) ||
+ rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28800000)) {
rt2x00_set_chip_rt(rt2x00dev, RT2870);
- } else if (rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) {
+ } else if (rt2x00_check_rev(rt2x00dev, 0xffff0000, 0x30700000)) {
rt2x00_set_chip_rt(rt2x00dev, RT3070);
} else {
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
@@ -1858,14 +1855,14 @@
}
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+ if (!rt2x00_rf(rt2x00dev, RF2820) &&
+ !rt2x00_rf(rt2x00dev, RF2850) &&
+ !rt2x00_rf(rt2x00dev, RF2720) &&
+ !rt2x00_rf(rt2x00dev, RF2750) &&
+ !rt2x00_rf(rt2x00dev, RF3020) &&
+ !rt2x00_rf(rt2x00dev, RF2020) &&
+ !rt2x00_rf(rt2x00dev, RF3021) &&
+ !rt2x00_rf(rt2x00dev, RF3022)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -2013,7 +2010,6 @@
int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
- struct rt2x00_chip *chip = &rt2x00dev->chip;
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
char *tx_power1;
@@ -2049,19 +2045,19 @@
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (rt2x00_rf(chip, RF2820) ||
- rt2x00_rf(chip, RF2720) ||
- (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(chip, RF3052))) {
+ if (rt2x00_rf(rt2x00dev, RF2820) ||
+ rt2x00_rf(rt2x00dev, RF2720) ||
+ (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(rt2x00dev, RF3052))) {
spec->num_channels = 14;
spec->channels = rf_vals;
- } else if (rt2x00_rf(chip, RF2850) || rt2x00_rf(chip, RF2750)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals);
spec->channels = rf_vals;
- } else if (rt2x00_rf(chip, RF3020) ||
- rt2x00_rf(chip, RF2020) ||
- rt2x00_rf(chip, RF3021) ||
- rt2x00_rf(chip, RF3022)) {
+ } else if (rt2x00_rf(rt2x00dev, RF3020) ||
+ rt2x00_rf(rt2x00dev, RF2020) ||
+ rt2x00_rf(rt2x00dev, RF3021) ||
+ rt2x00_rf(rt2x00dev, RF3022)) {
spec->num_channels = ARRAY_SIZE(rf_vals_302x);
spec->channels = rf_vals_302x;
}
@@ -2069,7 +2065,7 @@
/*
* Initialize HT information.
*/
- if (!rt2x00_rf(chip, RF2020))
+ if (!rt2x00_rf(rt2x00dev, RF2020))
spec->ht.ht_supported = true;
else
spec->ht.ht_supported = false;
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 458378c..b93eabb 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -48,14 +48,6 @@
#include "rt2800.h"
#include "rt2800pci.h"
-#ifdef CONFIG_RT2800PCI_PCI_MODULE
-#define CONFIG_RT2800PCI_PCI
-#endif
-
-#ifdef CONFIG_RT2800PCI_WISOC_MODULE
-#define CONFIG_RT2800PCI_WISOC
-#endif
-
/*
* Allow hardware encryption to be disabled.
*/
@@ -87,7 +79,7 @@
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
@@ -98,7 +90,7 @@
static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
}
-#endif /* CONFIG_RT2800PCI_WISOC */
+#endif /* CONFIG_RT2800PCI_SOC */
#ifdef CONFIG_RT2800PCI_PCI
static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
@@ -1129,8 +1121,7 @@
/*
* This device requires firmware.
*/
- if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
- !rt2x00_rt(&rt2x00dev->chip, RT3052))
+ if (!rt2x00_rt(rt2x00dev, RT2880) && !rt2x00_rt(rt2x00dev, RT3052))
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
@@ -1251,7 +1242,7 @@
#endif /* CONFIG_RT2800PCI_PCI */
MODULE_LICENSE("GPL");
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
#if defined(CONFIG_RALINK_RT288X)
__rt2x00soc_probe(RT2880, &rt2800pci_ops);
#elif defined(CONFIG_RALINK_RT305X)
@@ -1269,7 +1260,7 @@
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};
-#endif /* CONFIG_RT2800PCI_WISOC */
+#endif /* CONFIG_RT2800PCI_SOC */
#ifdef CONFIG_RT2800PCI_PCI
static struct pci_driver rt2800pci_driver = {
@@ -1286,7 +1277,7 @@
{
int ret = 0;
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
ret = platform_driver_register(&rt2800soc_driver);
if (ret)
return ret;
@@ -1294,7 +1285,7 @@
#ifdef CONFIG_RT2800PCI_PCI
ret = pci_register_driver(&rt2800pci_driver);
if (ret) {
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
platform_driver_unregister(&rt2800soc_driver);
#endif
return ret;
@@ -1309,7 +1300,7 @@
#ifdef CONFIG_RT2800PCI_PCI
pci_unregister_driver(&rt2800pci_driver);
#endif
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
platform_driver_unregister(&rt2800soc_driver);
#endif
}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 40295b4..0510f02 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -92,7 +92,7 @@
static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len)
{
- u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+ u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
size_t offset = 0;
/*
@@ -138,7 +138,7 @@
u32 reg;
u32 offset;
u32 length;
- u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+ u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
/*
* Check which section of the firmware we need.
@@ -933,6 +933,7 @@
{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 194dae0..b4c6e0a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -937,25 +937,25 @@
rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
}
-static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
+static inline char rt2x00_rt(struct rt2x00_dev *rt2x00dev, const u16 rt)
{
- return (chipset->rt == chip);
+ return (rt2x00dev->chip.rt == rt);
}
-static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip)
+static inline char rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf)
{
- return (chipset->rf == chip);
+ return (rt2x00dev->chip.rf == rf);
}
-static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
+static inline u32 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
{
- return chipset->rev;
+ return rt2x00dev->chip.rev;
}
-static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
+static inline bool rt2x00_check_rev(struct rt2x00_dev *rt2x00dev,
const u32 mask, const u32 rev)
{
- return ((chipset->rev & mask) == rev);
+ return ((rt2x00dev->chip.rev & mask) == rev);
}
static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
@@ -964,20 +964,20 @@
rt2x00dev->chip.intf = intf;
}
-static inline bool rt2x00_intf(const struct rt2x00_chip *chipset,
+static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
enum rt2x00_chip_intf intf)
{
- return (chipset->intf == intf);
+ return (rt2x00dev->chip.intf == intf);
}
static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev)
{
- return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI);
+ return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
}
static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev)
{
- return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB);
+ return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
}
/**
@@ -1019,9 +1019,9 @@
int rt2x00mac_start(struct ieee80211_hw *hw);
void rt2x00mac_stop(struct ieee80211_hw *hw);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index de549c2..00f1f93 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -187,10 +187,10 @@
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- struct rt2x00_intf *intf = vif_to_intf(conf->vif);
+ struct rt2x00_intf *intf = vif_to_intf(vif);
struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
struct queue_entry *entry = NULL;
unsigned int i;
@@ -203,7 +203,7 @@
!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return -ENODEV;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_AP:
/*
* We don't support mixed combinations of
@@ -263,7 +263,7 @@
* increase interface count and start initialization.
*/
- if (conf->type == NL80211_IFTYPE_AP)
+ if (vif->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count++;
else
rt2x00dev->intf_sta_count++;
@@ -273,16 +273,16 @@
mutex_init(&intf->beacon_skb_mutex);
intf->beacon = entry;
- if (conf->type == NL80211_IFTYPE_AP)
- memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
- memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
+ if (vif->type == NL80211_IFTYPE_AP)
+ memcpy(&intf->bssid, vif->addr, ETH_ALEN);
+ memcpy(&intf->mac, vif->addr, ETH_ALEN);
/*
* The MAC adddress must be configured after the device
* has been initialized. Otherwise the device can reset
* the MAC registers.
*/
- rt2x00lib_config_intf(rt2x00dev, intf, conf->type, intf->mac, NULL);
+ rt2x00lib_config_intf(rt2x00dev, intf, vif->type, intf->mac, NULL);
/*
* Some filters depend on the current working mode. We can force
@@ -296,10 +296,10 @@
EXPORT_SYMBOL_GPL(rt2x00mac_add_interface);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- struct rt2x00_intf *intf = vif_to_intf(conf->vif);
+ struct rt2x00_intf *intf = vif_to_intf(vif);
/*
* Don't allow interfaces to be remove while
@@ -307,11 +307,11 @@
* no interface is present.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
- (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
- (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
+ (vif->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+ (vif->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
return;
- if (conf->type == NL80211_IFTYPE_AP)
+ if (vif->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count--;
else
rt2x00dev->intf_sta_count--;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 0ca5893..c353b49 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -637,8 +637,7 @@
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
- rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
- rt2x00_rf(&rt2x00dev->chip, RF5325));
+ rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325));
/*
* Configure the RX antenna.
@@ -684,8 +683,7 @@
rt61pci_bbp_read(rt2x00dev, 4, &r4);
rt61pci_bbp_read(rt2x00dev, 77, &r77);
- rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
- rt2x00_rf(&rt2x00dev->chip, RF2529));
+ rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529));
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
!test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
@@ -833,12 +831,11 @@
rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5325))
+ if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325))
rt61pci_config_antenna_5x(rt2x00dev, ant);
- else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
+ else if (rt2x00_rf(rt2x00dev, RF2527))
rt61pci_config_antenna_2x(rt2x00dev, ant);
- else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
+ else if (rt2x00_rf(rt2x00dev, RF2529)) {
if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
rt61pci_config_antenna_2x(rt2x00dev, ant);
else
@@ -879,8 +876,7 @@
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
- smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527));
+ smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
rt61pci_bbp_read(rt2x00dev, 3, &r3);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
@@ -2302,10 +2298,10 @@
rt2x00_set_chip_rf(rt2x00dev, value, reg);
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2527) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2529)) {
+ if (!rt2x00_rf(rt2x00dev, RF5225) &&
+ !rt2x00_rf(rt2x00dev, RF5325) &&
+ !rt2x00_rf(rt2x00dev, RF2527) &&
+ !rt2x00_rf(rt2x00dev, RF2529)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -2360,7 +2356,7 @@
* the antenna settings should be gathered from the NIC
* eeprom word.
*/
- if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
+ if (rt2x00_rf(rt2x00dev, RF2529) &&
!test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
rt2x00dev->default_ant.rx =
ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
@@ -2571,8 +2567,7 @@
spec->channels = rf_vals_seq;
}
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5325)) {
+ if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6ce88d3..a026912 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -136,8 +136,8 @@
* all others contain 20 bits.
*/
rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS,
- 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527)));
+ 20 + (rt2x00_rf(rt2x00dev, RF5225) ||
+ rt2x00_rf(rt2x00dev, RF2527)));
rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0);
rt2x00_set_field32(®, PHY_CSR4_BUSY, 1);
@@ -741,11 +741,9 @@
rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
- if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
- rt2x00_rf(&rt2x00dev->chip, RF5225))
+ if (rt2x00_rf(rt2x00dev, RF5226) || rt2x00_rf(rt2x00dev, RF5225))
rt73usb_config_antenna_5x(rt2x00dev, ant);
- else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527))
+ else if (rt2x00_rf(rt2x00dev, RF2528) || rt2x00_rf(rt2x00dev, RF2527))
rt73usb_config_antenna_2x(rt2x00dev, ant);
}
@@ -779,8 +777,7 @@
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
- smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527));
+ smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
rt73usb_bbp_read(rt2x00dev, 3, &r3);
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
@@ -1210,8 +1207,7 @@
rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
reg = 0x000023b0;
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF2527))
+ if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527))
rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1);
rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
@@ -1827,16 +1823,16 @@
rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
rt2x00_print_chip(rt2x00dev);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
- rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+ if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0x25730) ||
+ rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
- if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+ if (!rt2x00_rf(rt2x00dev, RF5226) &&
+ !rt2x00_rf(rt2x00dev, RF2528) &&
+ !rt2x00_rf(rt2x00dev, RF5225) &&
+ !rt2x00_rf(rt2x00dev, RF2527)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -2081,17 +2077,17 @@
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
+ if (rt2x00_rf(rt2x00dev, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
spec->channels = rf_vals_bg_2528;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
+ } else if (rt2x00_rf(rt2x00dev, RF5226)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5226);
spec->channels = rf_vals_5226;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+ } else if (rt2x00_rf(rt2x00dev, RF2527)) {
spec->num_channels = 14;
spec->channels = rf_vals_5225_2527;
- } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
+ } else if (rt2x00_rf(rt2x00dev, RF5225)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
spec->channels = rf_vals_5225_2527;
diff --git a/drivers/net/wireless/rtl818x/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180.h
index 8721282..de3844f 100644
--- a/drivers/net/wireless/rtl818x/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180.h
@@ -60,7 +60,6 @@
struct rtl818x_csr __iomem *map;
const struct rtl818x_rf_ops *rf;
struct ieee80211_vif *vif;
- int mode;
/* rtl8180 driver specific */
spinlock_t lock;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 8a40a14..5a2b719 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -82,8 +82,6 @@
};
-
-
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
{
struct rtl8180_priv *priv = dev->priv;
@@ -615,7 +613,6 @@
reg |= RTL818X_CMD_TX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
- priv->mode = NL80211_IFTYPE_MONITOR;
return 0;
err_free_rings:
@@ -633,8 +630,6 @@
u8 reg;
int i;
- priv->mode = NL80211_IFTYPE_UNSPECIFIED;
-
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
@@ -657,38 +652,39 @@
}
static int rtl8180_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rtl8180_priv *priv = dev->priv;
- if (priv->mode != NL80211_IFTYPE_MONITOR)
- return -EOPNOTSUPP;
+ /*
+ * We only support one active interface at a time.
+ */
+ if (priv->vif)
+ return -EBUSY;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
- priv->mode = conf->type;
break;
default:
return -EOPNOTSUPP;
}
- priv->vif = conf->vif;
+ priv->vif = vif;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
- le32_to_cpu(*(__le32 *)conf->mac_addr));
+ le32_to_cpu(*(__le32 *)vif->addr));
rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
- le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
+ le16_to_cpu(*(__le16 *)(vif->addr + 4)));
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
return 0;
}
static void rtl8180_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rtl8180_priv *priv = dev->priv;
- priv->mode = NL80211_IFTYPE_MONITOR;
priv->vif = NULL;
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index 6af0f3f..6bb3211 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -92,7 +92,7 @@
struct rtl818x_csr *map;
const struct rtl818x_rf_ops *rf;
struct ieee80211_vif *vif;
- int mode;
+
/* The mutex protects the TX loopback state.
* Any attempt to set channels concurrently locks the device.
*/
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726d..f336c63 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1018,31 +1018,30 @@
}
static int rtl8187_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rtl8187_priv *priv = dev->priv;
int i;
int ret = -EOPNOTSUPP;
mutex_lock(&priv->conf_mutex);
- if (priv->mode != NL80211_IFTYPE_MONITOR)
+ if (priv->vif)
goto exit;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
- priv->mode = conf->type;
break;
default:
goto exit;
}
ret = 0;
- priv->vif = conf->vif;
+ priv->vif = vif;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->MAC[i],
- ((u8 *)conf->mac_addr)[i]);
+ ((u8 *)vif->addr)[i]);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
exit:
@@ -1051,11 +1050,10 @@
}
static void rtl8187_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct rtl8187_priv *priv = dev->priv;
mutex_lock(&priv->conf_mutex);
- priv->mode = NL80211_IFTYPE_MONITOR;
priv->vif = NULL;
mutex_unlock(&priv->conf_mutex);
}
@@ -1365,7 +1363,6 @@
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
- priv->mode = NL80211_IFTYPE_MONITOR;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_RX_INCLUDES_FCS;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index ded44c0..f82aa8b 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -33,7 +33,7 @@
struct rtl8187_led *led = &priv->led_tx;
/* Don't change the LED, when the device is down. */
- if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+ if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
return ;
/* Skip if the LED is not registered. */
@@ -71,7 +71,7 @@
struct rtl8187_led *led = &priv->led_tx;
/* Don't change the LED, when the device is down. */
- if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+ if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
return ;
/* Skip if the LED is not registered. */
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 2e733e7..28a8086 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -256,7 +256,7 @@
}
}
- if (loop >= INIT_LOOP) {
+ if (loop > INIT_LOOP) {
wl1251_error("timeout waiting for the hardware to "
"complete initialization");
return -EIO;
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 6aeffbe..4e373f3 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -511,13 +511,13 @@
}
static int wl1251_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1251 *wl = hw->priv;
int ret = 0;
wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
- conf->type, conf->mac_addr);
+ vif->type, vif->addr);
mutex_lock(&wl->mutex);
if (wl->vif) {
@@ -525,9 +525,9 @@
goto out;
}
- wl->vif = conf->vif;
+ wl->vif = vif;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
break;
@@ -539,8 +539,8 @@
goto out;
}
- if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
- memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
+ memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
ret = wl1251_acx_station_id(wl);
if (ret < 0)
@@ -553,7 +553,7 @@
}
static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1251 *wl = hw->priv;
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 94359b1..d0938db 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -107,10 +107,9 @@
CFG_RX_CTL_EN | CFG_RX_BCN_EN | \
CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
-#define WL1271_DEFAULT_BASIC_RATE_SET (CONF_TX_RATE_MASK_ALL)
-
#define WL1271_FW_NAME "wl1271-fw.bin"
#define WL1271_NVS_NAME "wl1271-nvs.bin"
+#define WL1271_NVS_LEN 468
/*
* Enable/disable 802.11a support for WL1273
@@ -276,6 +275,7 @@
struct dentry *retry_count;
struct dentry *excessive_retries;
+ struct dentry *gpio_power;
};
#define NUM_TX_QUEUES 4
@@ -322,6 +322,17 @@
enum wl1271_state state;
struct mutex mutex;
+#define WL1271_FLAG_STA_RATES_CHANGED (0)
+#define WL1271_FLAG_STA_ASSOCIATED (1)
+#define WL1271_FLAG_JOINED (2)
+#define WL1271_FLAG_GPIO_POWER (3)
+#define WL1271_FLAG_TX_QUEUE_STOPPED (4)
+#define WL1271_FLAG_SCANNING (5)
+#define WL1271_FLAG_IN_ELP (6)
+#define WL1271_FLAG_PSM (7)
+#define WL1271_FLAG_PSM_REQUESTED (8)
+ unsigned long flags;
+
struct wl1271_partition_set part;
struct wl1271_chip chip;
@@ -359,7 +370,6 @@
/* Frames scheduled for transmission, not handled yet */
struct sk_buff_head tx_queue;
- bool tx_queue_stopped;
struct work_struct tx_work;
@@ -387,14 +397,15 @@
u32 mbox_ptr[2];
/* Are we currently scanning */
- bool scanning;
struct wl1271_scan scan;
/* Our association ID */
u16 aid;
/* currently configured rate set */
+ u32 sta_rate_set;
u32 basic_rate_set;
+ u32 rate_set;
/* The current band */
enum ieee80211_band band;
@@ -405,18 +416,9 @@
unsigned int rx_config;
unsigned int rx_filter;
- /* is firmware in elp mode */
- bool elp;
-
struct completion *elp_compl;
struct delayed_work elp_work;
- /* we can be in psm, but not in elp, we have to differentiate */
- bool psm;
-
- /* PSM mode requested */
- bool psm_requested;
-
/* retry counter for PSM entries */
u8 psm_entry_retry;
@@ -435,9 +437,6 @@
struct ieee80211_vif *vif;
- /* Used for a workaround to send disconnect before rejoining */
- bool joined;
-
/* Current chipset configuration */
struct conf_drv_settings conf;
@@ -455,7 +454,9 @@
#define WL1271_TX_QUEUE_MAX_LENGTH 20
-/* WL1271 needs a 200ms sleep after power on */
+/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
+ on in case is has been shut down shortly before */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
static inline bool wl1271_11a_enabled(void)
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 5cc89bb..0b34348 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -390,6 +390,35 @@
return ret;
}
+int wl1271_acx_dco_itrim_params(struct wl1271 *wl)
+{
+ struct acx_dco_itrim_params *dco;
+ struct conf_itrim_settings *c = &wl->conf.itrim;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx dco itrim parameters");
+
+ dco = kzalloc(sizeof(*dco), GFP_KERNEL);
+ if (!dco) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ dco->enable = c->enable;
+ dco->timeout = cpu_to_le32(c->timeout);
+
+ ret = wl1271_cmd_configure(wl, ACX_SET_DCO_ITRIM_PARAMS,
+ dco, sizeof(*dco));
+ if (ret < 0) {
+ wl1271_warning("failed to set dco itrim parameters: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(dco);
+ return ret;
+}
+
int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter)
{
struct acx_beacon_filter_option *beacon_filter = NULL;
@@ -758,10 +787,11 @@
return 0;
}
-int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates)
+int wl1271_acx_rate_policies(struct wl1271 *wl)
{
struct acx_rate_policy *acx;
struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf;
+ int idx = 0;
int ret = 0;
wl1271_debug(DEBUG_ACX, "acx rate policies");
@@ -773,12 +803,21 @@
goto out;
}
- /* configure one default (one-size-fits-all) rate class */
- acx->rate_class_cnt = cpu_to_le32(1);
- acx->rate_class[0].enabled_rates = cpu_to_le32(enabled_rates);
- acx->rate_class[0].short_retry_limit = c->short_retry_limit;
- acx->rate_class[0].long_retry_limit = c->long_retry_limit;
- acx->rate_class[0].aflags = c->aflags;
+ /* configure one basic rate class */
+ idx = ACX_TX_BASIC_RATE;
+ acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate_set);
+ acx->rate_class[idx].short_retry_limit = c->short_retry_limit;
+ acx->rate_class[idx].long_retry_limit = c->long_retry_limit;
+ acx->rate_class[idx].aflags = c->aflags;
+
+ /* configure one AP supported rate class */
+ idx = ACX_TX_AP_FULL_RATE;
+ acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->rate_set);
+ acx->rate_class[idx].short_retry_limit = c->short_retry_limit;
+ acx->rate_class[idx].long_retry_limit = c->long_retry_limit;
+ acx->rate_class[idx].aflags = c->aflags;
+
+ acx->rate_class_cnt = cpu_to_le32(ACX_TX_RATE_POLICY_CNT);
ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
if (ret < 0) {
@@ -1012,59 +1051,6 @@
return ret;
}
-int wl1271_acx_smart_reflex(struct wl1271 *wl)
-{
- struct acx_smart_reflex_state *sr_state = NULL;
- struct acx_smart_reflex_config_params *sr_param = NULL;
- int i, ret;
-
- wl1271_debug(DEBUG_ACX, "acx smart reflex");
-
- sr_param = kzalloc(sizeof(*sr_param), GFP_KERNEL);
- if (!sr_param) {
- ret = -ENOMEM;
- goto out;
- }
-
- for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
- struct conf_mart_reflex_err_table *e =
- &(wl->conf.init.sr_err_tbl[i]);
-
- sr_param->error_table[i].len = e->len;
- sr_param->error_table[i].upper_limit = e->upper_limit;
- memcpy(sr_param->error_table[i].values, e->values, e->len);
- }
-
- ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
- sr_param, sizeof(*sr_param));
- if (ret < 0) {
- wl1271_warning("failed to set smart reflex params: %d", ret);
- goto out;
- }
-
- sr_state = kzalloc(sizeof(*sr_state), GFP_KERNEL);
- if (!sr_state) {
- ret = -ENOMEM;
- goto out;
- }
-
- /* enable smart reflex */
- sr_state->enable = wl->conf.init.sr_enable;
-
- ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
- sr_state, sizeof(*sr_state));
- if (ret < 0) {
- wl1271_warning("failed to set smart reflex params: %d", ret);
- goto out;
- }
-
-out:
- kfree(sr_state);
- kfree(sr_param);
- return ret;
-
-}
-
int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable)
{
struct wl1271_acx_bet_enable *acx = NULL;
@@ -1132,3 +1118,31 @@
kfree(acx);
return ret;
}
+
+int wl1271_acx_pm_config(struct wl1271 *wl)
+{
+ struct wl1271_acx_pm_config *acx = NULL;
+ struct conf_pm_config_settings *c = &wl->conf.pm_config;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx pm config");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->host_clk_settling_time = cpu_to_le32(c->host_clk_settling_time);
+ acx->host_fast_wakeup_support = c->host_fast_wakeup_support;
+
+ ret = wl1271_cmd_configure(wl, ACX_PM_CONFIG, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("acx pm config failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 2ce0a81..1bb63af 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -415,23 +415,12 @@
u8 pad[3];
} __attribute__ ((packed));
-struct acx_smart_reflex_state {
+struct acx_dco_itrim_params {
struct acx_header header;
u8 enable;
u8 padding[3];
-} __attribute__ ((packed));
-
-struct smart_reflex_err_table {
- u8 len;
- s8 upper_limit;
- s8 values[14];
-} __attribute__ ((packed));
-
-struct acx_smart_reflex_config_params {
- struct acx_header header;
-
- struct smart_reflex_err_table error_table[3];
+ __le32 timeout;
} __attribute__ ((packed));
#define PTA_ANTENNA_TYPE_DEF (0)
@@ -837,6 +826,9 @@
u8 reserved;
};
+#define ACX_TX_BASIC_RATE 0
+#define ACX_TX_AP_FULL_RATE 1
+#define ACX_TX_RATE_POLICY_CNT 2
struct acx_rate_policy {
struct acx_header header;
@@ -877,8 +869,8 @@
__le16 tx_compl_threshold; /* number of packets */
} __attribute__ ((packed));
-#define ACX_RX_MEM_BLOCKS 64
-#define ACX_TX_MIN_MEM_BLOCKS 64
+#define ACX_RX_MEM_BLOCKS 70
+#define ACX_TX_MIN_MEM_BLOCKS 40
#define ACX_TX_DESCRIPTORS 32
#define ACX_NUM_SSID_PROFILES 1
@@ -969,6 +961,13 @@
used. */
} __attribute__((packed));
+struct wl1271_acx_pm_config {
+ struct acx_header header;
+
+ __le32 host_clk_settling_time;
+ u8 host_fast_wakeup_support;
+ u8 padding[3];
+} __attribute__ ((packed));
enum {
ACX_WAKE_UP_CONDITIONS = 0x0002,
@@ -1027,13 +1026,13 @@
ACX_HT_BSS_OPERATION = 0x0058,
ACX_COEX_ACTIVITY = 0x0059,
ACX_SET_SMART_REFLEX_DEBUG = 0x005A,
- ACX_SET_SMART_REFLEX_STATE = 0x005B,
- ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
+ ACX_SET_DCO_ITRIM_PARAMS = 0x0061,
DOT11_RX_MSDU_LIFE_TIME = 0x1004,
DOT11_CUR_TX_PWR = 0x100D,
DOT11_RX_DOT11_MODE = 0x1012,
DOT11_RTS_THRESHOLD = 0x1013,
DOT11_GROUP_ADDRESS_TBL = 0x1014,
+ ACX_PM_CONFIG = 0x1016,
MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
@@ -1056,6 +1055,7 @@
void *mc_list, u32 mc_list_len);
int wl1271_acx_service_period_timeout(struct wl1271 *wl);
int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
int wl1271_acx_conn_monit_params(struct wl1271 *wl);
@@ -1069,7 +1069,7 @@
int wl1271_acx_cts_protect(struct wl1271 *wl,
enum acx_ctsprotect_type ctsprotect);
int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
-int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates);
+int wl1271_acx_rate_policies(struct wl1271 *wl);
int wl1271_acx_ac_cfg(struct wl1271 *wl);
int wl1271_acx_tid_cfg(struct wl1271 *wl);
int wl1271_acx_frag_threshold(struct wl1271 *wl);
@@ -1081,5 +1081,6 @@
int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
u8 version);
+int wl1271_acx_pm_config(struct wl1271 *wl);
#endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index b7c9645..e803b87 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -225,9 +225,15 @@
if (nvs == NULL)
return -ENODEV;
+ if (wl->nvs_len < WL1271_NVS_LEN)
+ return -EINVAL;
+
nvs_ptr = nvs;
- nvs_len = wl->nvs_len;
+ /* only the first part of the NVS needs to be uploaded */
+ nvs_len = WL1271_NVS_LEN;
+
+ /* FIXME: read init settings from the remaining part of the NVS */
/* Update the device MAC address into the nvs */
nvs[11] = wl->mac_addr[0];
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 886a9bc..a74259b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -209,6 +209,26 @@
gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
gen_parms->settings = g->settings;
+ gen_parms->sr_state = g->sr_state;
+
+ memcpy(gen_parms->srf1,
+ g->srf1,
+ CONF_MAX_SMART_REFLEX_PARAMS);
+ memcpy(gen_parms->srf2,
+ g->srf2,
+ CONF_MAX_SMART_REFLEX_PARAMS);
+ memcpy(gen_parms->srf3,
+ g->srf3,
+ CONF_MAX_SMART_REFLEX_PARAMS);
+ memcpy(gen_parms->sr_debug_table,
+ g->sr_debug_table,
+ CONF_MAX_SMART_REFLEX_PARAMS);
+
+ gen_parms->sr_sen_n_p = g->sr_sen_n_p;
+ gen_parms->sr_sen_n_p_gain = g->sr_sen_n_p_gain;
+ gen_parms->sr_sen_nrn = g->sr_sen_nrn;
+ gen_parms->sr_sen_prn = g->sr_sen_prn;
+
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
if (ret < 0)
wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
@@ -253,6 +273,8 @@
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_rate_limits_extreme, r->tx_rate_limits_extreme,
+ CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
CONF_NUMBER_OF_CHANNELS_2_4);
@@ -263,6 +285,11 @@
memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+ radio_parms->degraded_low_to_normal_threshold =
+ r->degraded_low_to_normal_threshold;
+ radio_parms->degraded_normal_to_high_threshold =
+ r->degraded_normal_to_high_threshold;
+
for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
radio_parms->tx_ref_pd_voltage_5[i] =
@@ -275,6 +302,8 @@
r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_rate_limits_degraded_5,
r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+ memcpy(radio_parms->tx_rate_limits_extreme_5,
+ r->tx_rate_limits_extreme_5, CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->tx_channel_limits_ofdm_5,
r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
@@ -283,6 +312,10 @@
CONF_NUMBER_OF_RATE_GROUPS);
memcpy(radio_parms->rx_fem_insertion_loss_5,
r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
+ radio_parms->degraded_low_to_normal_threshold_5 =
+ r->degraded_low_to_normal_threshold_5;
+ radio_parms->degraded_normal_to_high_threshold_5 =
+ r->degraded_normal_to_high_threshold_5;
wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
radio_parms, sizeof(*radio_parms));
@@ -311,19 +344,6 @@
do_cal = false;
}
- /* FIXME: This is a workaround, because with the current stack, we
- * cannot know when we have disassociated. So, if we have already
- * joined, we disconnect before joining again. */
- if (wl->joined) {
- ret = wl1271_cmd_disconnect(wl);
- if (ret < 0) {
- wl1271_error("failed to disconnect before rejoining");
- goto out;
- }
-
- wl->joined = false;
- }
-
join = kzalloc(sizeof(*join), GFP_KERNEL);
if (!join) {
ret = -ENOMEM;
@@ -388,8 +408,6 @@
goto out_free;
}
- wl->joined = true;
-
/*
* ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
* simplify locking we just sleep instead, for now
@@ -487,7 +505,7 @@
return 0;
}
-int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
+int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
{
struct cmd_enabledisable_path *cmd;
int ret;
@@ -501,7 +519,8 @@
goto out;
}
- cmd->channel = channel;
+ /* the channel here is only used for calibration, so hardcoded to 1 */
+ cmd->channel = 1;
if (enable) {
cmd_rx = CMD_ENABLE_RX;
@@ -514,22 +533,22 @@
ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("rx %s cmd for channel %d failed",
- enable ? "start" : "stop", channel);
+ enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
- enable ? "start" : "stop", channel);
+ enable ? "start" : "stop", cmd->channel);
ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("tx %s cmd for channel %d failed",
- enable ? "start" : "stop", channel);
+ enable ? "start" : "stop", cmd->channel);
return ret;
}
wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
- enable ? "start" : "stop", channel);
+ enable ? "start" : "stop", cmd->channel);
out:
kfree(cmd);
@@ -636,7 +655,7 @@
channels = wl->hw->wiphy->bands[ieee_band]->channels;
n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
- if (wl->scanning)
+ if (test_bit(WL1271_FLAG_SCANNING, &wl->flags))
return -EINVAL;
params = kzalloc(sizeof(*params), GFP_KERNEL);
@@ -711,7 +730,7 @@
wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
- wl->scanning = true;
+ set_bit(WL1271_FLAG_SCANNING, &wl->flags);
if (wl1271_11a_enabled()) {
wl->scan.state = band;
if (band == WL1271_SCAN_BAND_DUAL) {
@@ -729,7 +748,7 @@
ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
if (ret < 0) {
wl1271_error("SCAN failed");
- wl->scanning = false;
+ clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
goto out;
}
@@ -777,7 +796,7 @@
return ret;
}
-static int wl1271_build_basic_rates(char *rates, u8 band)
+static int wl1271_build_basic_rates(u8 *rates, u8 band)
{
u8 index = 0;
@@ -804,7 +823,7 @@
return index;
}
-static int wl1271_build_extended_rates(char *rates, u8 band)
+static int wl1271_build_extended_rates(u8 *rates, u8 band)
{
u8 index = 0;
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index b4fa4ac..09fe912 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -37,7 +37,7 @@
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
-int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable);
+int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len);
@@ -437,6 +437,21 @@
u8 tx_bip_fem_autodetect;
u8 tx_bip_fem_manufacturer;
u8 settings;
+
+ u8 sr_state;
+
+ s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
+ s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
+ s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
+
+ s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
+
+ u8 sr_sen_n_p;
+ u8 sr_sen_n_p_gain;
+ u8 sr_sen_nrn;
+ u8 sr_sen_prn;
+
+ u8 padding[3];
} __attribute__ ((packed));
struct wl1271_radio_parms_cmd {
@@ -458,11 +473,12 @@
/* Dynamic radio parameters */
/* 2.4GHz */
__le16 tx_ref_pd_voltage;
- s8 tx_ref_power;
+ u8 tx_ref_power;
s8 tx_offset_db;
s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
@@ -471,15 +487,19 @@
u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
u8 rx_fem_insertion_loss;
- u8 padding2;
+ u8 degraded_low_to_normal_threshold;
+ u8 degraded_normal_to_high_threshold;
+
+ u8 padding1; /* our own padding, not in ref driver */
/* 5GHz */
__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
@@ -488,7 +508,10 @@
s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
- u8 padding3[2];
+ u8 degraded_low_to_normal_threshold_5;
+ u8 degraded_normal_to_high_threshold_5;
+
+ u8 padding2[2];
} __attribute__ ((packed));
struct wl1271_cmd_cal_channel_tune {
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 565373e..1993d63 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -258,7 +258,8 @@
#define CONF_TX_MAX_RATE_CLASSES 8
#define CONF_TX_RATE_MASK_UNSPECIFIED 0
-#define CONF_TX_RATE_MASK_ALL 0x1eff
+#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
+ CONF_HW_BIT_RATE_2MBPS)
#define CONF_TX_RATE_RETRY_LIMIT 10
struct conf_tx_rate_class {
@@ -722,31 +723,6 @@
u8 psm_entry_retries;
};
-#define CONF_SR_ERR_TBL_MAX_VALUES 14
-
-struct conf_mart_reflex_err_table {
- /*
- * Length of the error table values table.
- *
- * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
- */
- u8 len;
-
- /*
- * Smart Reflex error table upper limit.
- *
- * Range: s8
- */
- s8 upper_limit;
-
- /*
- * Smart Reflex error table values.
- *
- * Range: s8
- */
- s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
-};
-
enum {
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
@@ -759,6 +735,9 @@
CONF_DUAL_BAND
};
+
+#define CONF_MAX_SMART_REFLEX_PARAMS 16
+
struct conf_general_parms {
/*
* RF Reference Clock type / speed
@@ -815,6 +794,20 @@
* Range: Unknown
*/
u8 settings;
+
+ /* Smart reflex settings */
+ u8 sr_state;
+
+ s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
+ s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
+ s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
+
+ s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
+
+ u8 sr_sen_n_p;
+ u8 sr_sen_n_p_gain;
+ u8 sr_sen_nrn;
+ u8 sr_sen_prn;
};
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
@@ -847,12 +840,13 @@
*
* Range: unknown
*/
- s16 tx_ref_pd_voltage;
- s8 tx_ref_power;
+ u16 tx_ref_pd_voltage;
+ u8 tx_ref_power;
s8 tx_offset_db;
s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
@@ -861,17 +855,22 @@
u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
u8 rx_fem_insertion_loss;
+ u8 degraded_low_to_normal_threshold;
+ u8 degraded_normal_to_high_threshold;
+
+
/*
* Dynamic radio parameters for 5GHz
*
* Range: unknown
*/
- s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
- s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+ u8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
@@ -879,24 +878,13 @@
/* FIXME: this is inconsistent with the types for 2.4GHz */
s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+ u8 degraded_low_to_normal_threshold_5;
+ u8 degraded_normal_to_high_threshold_5;
};
-#define CONF_SR_ERR_TBL_COUNT 3
-
struct conf_init_settings {
/*
- * Configure Smart Reflex error table values.
- */
- struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
-
- /*
- * Smart Reflex enable flag.
- *
- * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
- */
- u8 sr_enable;
-
- /*
* Configure general parameters.
*/
struct conf_general_parms genparam;
@@ -908,12 +896,38 @@
};
+struct conf_itrim_settings {
+ /* enable dco itrim */
+ u8 enable;
+
+ /* moderation timeout in microsecs from the last TX */
+ u32 timeout;
+};
+
+struct conf_pm_config_settings {
+ /*
+ * Host clock settling time
+ *
+ * Range: 0 - 30000 us
+ */
+ u32 host_clk_settling_time;
+
+ /*
+ * Host fast wakeup support
+ *
+ * Range: true, false
+ */
+ bool host_fast_wakeup_support;
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
struct conf_init_settings init;
+ struct conf_itrim_settings itrim;
+ struct conf_pm_config_settings pm_config;
};
#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
index c1805e5..8d7588c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
@@ -237,6 +237,64 @@
.open = wl1271_open_file_generic,
};
+static ssize_t gpio_power_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+
+ int res;
+ char buf[10];
+
+ res = scnprintf(buf, sizeof(buf), "%d\n", state);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static ssize_t gpio_power_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ char buf[10];
+ size_t len;
+ unsigned long value;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ buf[len] = '\0';
+
+ ret = strict_strtoul(buf, 0, &value);
+ if (ret < 0) {
+ wl1271_warning("illegal value in gpio_power");
+ goto out;
+ }
+
+ if (value) {
+ wl->set_power(true);
+ set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+ } else {
+ wl->set_power(false);
+ clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return count;
+}
+
+static const struct file_operations gpio_power_ops = {
+ .read = gpio_power_read,
+ .write = gpio_power_write,
+ .open = wl1271_open_file_generic
+};
+
static void wl1271_debugfs_delete_files(struct wl1271 *wl)
{
DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
@@ -333,6 +391,8 @@
DEBUGFS_DEL(tx_queue_len);
DEBUGFS_DEL(retry_count);
DEBUGFS_DEL(excessive_retries);
+
+ DEBUGFS_DEL(gpio_power);
}
static int wl1271_debugfs_add_files(struct wl1271 *wl)
@@ -434,6 +494,8 @@
DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+ DEBUGFS_ADD(gpio_power, wl->debugfs.rootdir);
+
out:
if (ret < 0)
wl1271_debugfs_delete_files(wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index d13fdd9..0a145af 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -35,7 +35,7 @@
wl1271_debug(DEBUG_EVENT, "status: 0x%x",
mbox->scheduled_scan_status);
- if (wl->scanning) {
+ if (test_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
if (wl->scan.state == WL1271_SCAN_BAND_DUAL) {
wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
NULL, size);
@@ -43,7 +43,7 @@
* to the wl1271_cmd_scan function that we are not
* scanning as it checks that.
*/
- wl->scanning = false;
+ clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
wl1271_cmd_scan(wl, wl->scan.ssid, wl->scan.ssid_len,
wl->scan.active,
wl->scan.high_prio,
@@ -62,7 +62,7 @@
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, false);
mutex_lock(&wl->mutex);
- wl->scanning = false;
+ clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
}
}
return 0;
@@ -78,7 +78,7 @@
switch (mbox->ps_status) {
case EVENT_ENTER_POWER_SAVE_FAIL:
- if (!wl->psm) {
+ if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
wl->psm_entry_retry = 0;
break;
}
@@ -89,7 +89,6 @@
} else {
wl1271_error("PSM entry failed, giving up.\n");
wl->psm_entry_retry = 0;
- *beacon_loss = true;
}
break;
case EVENT_ENTER_POWER_SAVE_SUCCESS:
@@ -136,7 +135,8 @@
* filtering) is enabled. Without PSM, the stack will receive all
* beacons and can detect beacon loss by itself.
*/
- if (vector & BSS_LOSE_EVENT_ID && wl->psm) {
+ if (vector & BSS_LOSE_EVENT_ID &&
+ test_bit(WL1271_FLAG_PSM, &wl->flags)) {
wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
/* indicate to the stack, that beacons have been lost */
@@ -150,7 +150,7 @@
return ret;
}
- if (beacon_loss) {
+ if (wl->vif && beacon_loss) {
/* Obviously, it's dangerous to release the mutex while
we are holding many of the variables in the wl struct.
That's why it's done last in the function, and care must
@@ -184,7 +184,7 @@
wl->mbox_ptr[0], wl->mbox_ptr[1]);
}
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num, bool do_ack)
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
{
struct event_mailbox mbox;
int ret;
@@ -204,9 +204,7 @@
return ret;
/* then we let the firmware know it can go on...*/
- if (do_ack)
- wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG,
- INTR_TRIG_EVENT_ACK);
+ wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
return 0;
}
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 4e3f55e..278f920 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -112,6 +112,6 @@
int wl1271_event_unmask(struct wl1271 *wl);
void wl1271_event_mbox_config(struct wl1271 *wl);
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox, bool do_ack);
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 11249b4..c9848ee 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -229,6 +229,10 @@
if (ret < 0)
goto out_free_memmap;
+ ret = wl1271_acx_dco_itrim_params(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
/* Initialize connection monitoring thresholds */
ret = wl1271_acx_conn_monit_params(wl);
if (ret < 0)
@@ -280,12 +284,12 @@
goto out_free_memmap;
/* Configure TX rate classes */
- ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_ALL);
+ ret = wl1271_acx_rate_policies(wl);
if (ret < 0)
goto out_free_memmap;
/* Enable data path */
- ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+ ret = wl1271_cmd_data_path(wl, 1);
if (ret < 0)
goto out_free_memmap;
@@ -299,8 +303,8 @@
if (ret < 0)
goto out_free_memmap;
- /* Configure smart reflex */
- ret = wl1271_acx_smart_reflex(wl);
+ /* configure PM */
+ ret = wl1271_acx_pm_config(wl);
if (ret < 0)
goto out_free_memmap;
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b62c00f..e4867b8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -47,6 +47,8 @@
#include "wl1271_cmd.h"
#include "wl1271_boot.h"
+#define WL1271_BOOT_RETRIES 3
+
static struct conf_drv_settings default_conf = {
.sg = {
.per_threshold = 7500,
@@ -67,16 +69,17 @@
.ps_poll_timeout = 15,
.upsd_timeout = 15,
.rts_threshold = 2347,
- .rx_cca_threshold = 0xFFEF,
- .irq_blk_threshold = 0,
- .irq_pkt_threshold = USHORT_MAX,
- .irq_timeout = 5,
+ .rx_cca_threshold = 0,
+ .irq_blk_threshold = 0xFFFF,
+ .irq_pkt_threshold = 0,
+ .irq_timeout = 600,
.queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
},
.tx = {
.tx_energy_detection = 0,
.rc_conf = {
- .enabled_rates = CONF_TX_RATE_MASK_UNSPECIFIED,
+ .enabled_rates = CONF_HW_BIT_RATE_1MBPS |
+ CONF_HW_BIT_RATE_2MBPS,
.short_retry_limit = 10,
.long_retry_limit = 10,
.aflags = 0
@@ -172,8 +175,8 @@
}
},
.frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
- .tx_compl_timeout = 5,
- .tx_compl_threshold = 5
+ .tx_compl_timeout = 700,
+ .tx_compl_threshold = 4
},
.conn = {
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
@@ -186,12 +189,12 @@
.rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
}
},
- .synch_fail_thold = 5,
+ .synch_fail_thold = 10,
.bss_lose_timeout = 100,
.beacon_rx_timeout = 10000,
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
- .ps_poll_threshold = 4,
+ .ps_poll_threshold = 20,
.sig_trigger_count = 2,
.sig_trigger = {
[0] = {
@@ -226,46 +229,35 @@
.psm_entry_retries = 3
},
.init = {
- .sr_err_tbl = {
- [0] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
- 0x00 }
- },
- [1] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
- 0x00 }
- },
- [2] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
- 0x00 }
- }
- },
- .sr_enable = 1,
.genparam = {
.ref_clk = CONF_REF_CLK_38_4_E,
.settling_time = 5,
.clk_valid_on_wakeup = 0,
.dc2dcmode = 0,
.single_dual_band = CONF_SINGLE_BAND,
- .tx_bip_fem_autodetect = 0,
+ .tx_bip_fem_autodetect = 1,
.tx_bip_fem_manufacturer = 1,
.settings = 1,
+ .sr_state = 1,
+ .srf1 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .srf2 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .srf3 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0 },
+ .sr_sen_n_p = 0,
+ .sr_sen_n_p_gain = 0,
+ .sr_sen_nrn = 0,
+ .sr_sen_prn = 0,
},
.radioparam = {
- .rx_trace_loss = 10,
- .tx_trace_loss = 10,
+ .rx_trace_loss = 0x24,
+ .tx_trace_loss = 0x0,
.rx_rssi_and_proc_compens = {
0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
- 0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+ 0xfc, 0x00, 0x80, 0x10, 0xf0, 0xf8,
0x00, 0x0a, 0x14 },
.rx_trace_loss_5 = { 0, 0, 0, 0, 0, 0, 0 },
.tx_trace_loss_5 = { 0, 0, 0, 0, 0, 0, 0 },
@@ -273,13 +265,15 @@
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00 },
- .tx_ref_pd_voltage = 0x24e,
- .tx_ref_power = 0x78,
+ .tx_ref_pd_voltage = 0x1a9,
+ .tx_ref_power = 0x80,
.tx_offset_db = 0x0,
.tx_rate_limits_normal = {
- 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+ 0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
.tx_rate_limits_degraded = {
- 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+ 0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
+ .tx_rate_limits_extreme = {
+ 0x19, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
.tx_channel_limits_11b = {
0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
@@ -289,10 +283,12 @@
0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
0x20, 0x50 },
.tx_pdv_rate_offsets = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ 0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
.tx_ibias = {
- 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
- .rx_fem_insertion_loss = 0x14,
+ 0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
+ .rx_fem_insertion_loss = 0x0e,
+ .degraded_low_to_normal_threshold = 0x1e,
+ .degraded_normal_to_high_threshold = 0x2d,
.tx_ref_pd_voltage_5 = {
0x0190, 0x01a4, 0x01c3, 0x01d8,
0x020a, 0x021c },
@@ -304,6 +300,8 @@
0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
.tx_rate_limits_degraded_5 = {
0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+ .tx_rate_limits_extreme_5 = {
+ 0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
.tx_channel_limits_ofdm_5 = {
0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
@@ -315,8 +313,18 @@
.tx_ibias_5 = {
0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
.rx_fem_insertion_loss_5 = {
- 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 }
+ 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
+ .degraded_low_to_normal_threshold_5 = 0x00,
+ .degraded_normal_to_high_threshold_5 = 0x00
}
+ },
+ .itrim = {
+ .enable = false,
+ .timeout = 50000,
+ },
+ .pm_config = {
+ .host_clk_settling_time = 5000,
+ .host_fast_wakeup_support = false
}
};
@@ -359,7 +367,7 @@
if (ret < 0)
return ret;
- ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+ ret = wl1271_cmd_data_path(wl, 1);
if (ret < 0)
return ret;
@@ -374,11 +382,13 @@
static void wl1271_power_off(struct wl1271 *wl)
{
wl->set_power(false);
+ clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static void wl1271_power_on(struct wl1271 *wl)
{
wl->set_power(true);
+ set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static void wl1271_fw_status(struct wl1271 *wl,
@@ -447,14 +457,13 @@
intr &= WL1271_INTR_MASK;
if (intr & WL1271_ACX_INTR_EVENT_A) {
- bool do_ack = (intr & WL1271_ACX_INTR_EVENT_B) ? false : true;
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
- wl1271_event_handle(wl, 0, do_ack);
+ wl1271_event_handle(wl, 0);
}
if (intr & WL1271_ACX_INTR_EVENT_B) {
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
- wl1271_event_handle(wl, 1, true);
+ wl1271_event_handle(wl, 1);
}
if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
@@ -614,6 +623,7 @@
struct wl1271_partition_set partition;
int ret = 0;
+ msleep(WL1271_PRE_POWER_ON_SLEEP);
wl1271_power_on(wl);
msleep(WL1271_POWER_ON_SLEEP);
wl1271_spi_reset(wl);
@@ -643,7 +653,7 @@
ret = wl1271_setup(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
break;
case CHIP_ID_1271_PG20:
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
@@ -651,38 +661,34 @@
ret = wl1271_setup(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
break;
default:
- wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
+ wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
ret = -ENODEV;
- goto out_power_off;
+ goto out;
}
if (wl->fw == NULL) {
ret = wl1271_fetch_firmware(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
}
/* No NVS from netlink, try to get it from the filesystem */
if (wl->nvs == NULL) {
ret = wl1271_fetch_nvs(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
}
- goto out;
-
-out_power_off:
- wl1271_power_off(wl);
-
out:
return ret;
}
int wl1271_plt_start(struct wl1271 *wl)
{
+ int retries = WL1271_BOOT_RETRIES;
int ret;
mutex_lock(&wl->mutex);
@@ -696,35 +702,48 @@
goto out;
}
- wl->state = WL1271_STATE_PLT;
+ while (retries) {
+ retries--;
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto power_off;
- ret = wl1271_chip_wakeup(wl);
- if (ret < 0)
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto power_off;
+
+ ret = wl1271_plt_init(wl);
+ if (ret < 0)
+ goto irq_disable;
+
+ /* Make sure power saving is disabled */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+ if (ret < 0)
+ goto irq_disable;
+
+ wl->state = WL1271_STATE_PLT;
+ wl1271_notice("firmware booted in PLT mode (%s)",
+ wl->chip.fw_ver);
goto out;
- ret = wl1271_boot(wl);
- if (ret < 0)
- goto out_power_off;
+irq_disable:
+ wl1271_disable_interrupts(wl);
+ mutex_unlock(&wl->mutex);
+ /* Unlocking the mutex in the middle of handling is
+ inherently unsafe. In this case we deem it safe to do,
+ because we need to let any possibly pending IRQ out of
+ the system (and while we are WL1271_STATE_OFF the IRQ
+ work function will not do anything.) Also, any other
+ possible concurrent operations will fail due to the
+ current state, hence the wl1271 struct should be safe. */
+ cancel_work_sync(&wl->irq_work);
+ mutex_lock(&wl->mutex);
+power_off:
+ wl1271_power_off(wl);
+ }
- wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
-
- ret = wl1271_plt_init(wl);
- if (ret < 0)
- goto out_irq_disable;
-
- /* Make sure power saving is disabled */
- ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
- if (ret < 0)
- goto out_irq_disable;
-
- goto out;
-
-out_irq_disable:
- wl1271_disable_interrupts(wl);
-
-out_power_off:
- wl1271_power_off(wl);
-
+ wl1271_error("firmware boot in PLT mode failed despite %d retries",
+ WL1271_BOOT_RETRIES);
out:
mutex_unlock(&wl->mutex);
@@ -762,7 +781,20 @@
static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1271 *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sta *sta = txinfo->control.sta;
+ unsigned long flags;
+ /* peek into the rates configured in the STA entry */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ if (sta && sta->supp_rates[conf->channel->band] != wl->sta_rate_set) {
+ wl->sta_rate_set = sta->supp_rates[conf->channel->band];
+ set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
+ }
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ /* queue the packet */
skb_queue_tail(&wl->tx_queue, skb);
/*
@@ -784,7 +816,7 @@
* protected. Maybe fix this by removing the stupid
* variable altogether and checking the real queue state?
*/
- wl->tx_queue_stopped = true;
+ set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
}
return NETDEV_TX_OK;
@@ -880,6 +912,7 @@
static int wl1271_op_start(struct ieee80211_hw *hw)
{
struct wl1271 *wl = hw->priv;
+ int retries = WL1271_BOOT_RETRIES;
int ret = 0;
wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -893,30 +926,42 @@
goto out;
}
- ret = wl1271_chip_wakeup(wl);
- if (ret < 0)
+ while (retries) {
+ retries--;
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto power_off;
+
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto power_off;
+
+ ret = wl1271_hw_init(wl);
+ if (ret < 0)
+ goto irq_disable;
+
+ wl->state = WL1271_STATE_ON;
+ wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
goto out;
- ret = wl1271_boot(wl);
- if (ret < 0)
- goto out_power_off;
+irq_disable:
+ wl1271_disable_interrupts(wl);
+ mutex_unlock(&wl->mutex);
+ /* Unlocking the mutex in the middle of handling is
+ inherently unsafe. In this case we deem it safe to do,
+ because we need to let any possibly pending IRQ out of
+ the system (and while we are WL1271_STATE_OFF the IRQ
+ work function will not do anything.) Also, any other
+ possible concurrent operations will fail due to the
+ current state, hence the wl1271 struct should be safe. */
+ cancel_work_sync(&wl->irq_work);
+ mutex_lock(&wl->mutex);
+power_off:
+ wl1271_power_off(wl);
+ }
- ret = wl1271_hw_init(wl);
- if (ret < 0)
- goto out_irq_disable;
-
- wl->state = WL1271_STATE_ON;
-
- wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
-
- goto out;
-
-out_irq_disable:
- wl1271_disable_interrupts(wl);
-
-out_power_off:
- wl1271_power_off(wl);
-
+ wl1271_error("firmware boot failed despite %d retries",
+ WL1271_BOOT_RETRIES);
out:
mutex_unlock(&wl->mutex);
@@ -944,11 +989,10 @@
WARN_ON(wl->state != WL1271_STATE_ON);
- if (wl->scanning) {
+ if (test_and_clear_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, true);
mutex_lock(&wl->mutex);
- wl->scanning = false;
}
wl->state = WL1271_STATE_OFF;
@@ -973,10 +1017,7 @@
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
- wl->elp = false;
- wl->psm = 0;
wl->psm_entry_retry = 0;
- wl->tx_queue_stopped = false;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
wl->tx_results_count = 0;
@@ -986,7 +1027,9 @@
wl->tx_security_seq_32 = 0;
wl->time_offset = 0;
wl->session_counter = 0;
- wl->joined = false;
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
+ wl->flags = 0;
for (i = 0; i < NUM_TX_QUEUES; i++)
wl->tx_blocks_freed[i] = 0;
@@ -996,13 +1039,13 @@
}
static int wl1271_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1271 *wl = hw->priv;
int ret = 0;
wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
- conf->type, conf->mac_addr);
+ vif->type, vif->addr);
mutex_lock(&wl->mutex);
if (wl->vif) {
@@ -1010,9 +1053,9 @@
goto out;
}
- wl->vif = conf->vif;
+ wl->vif = vif;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
break;
@@ -1032,7 +1075,7 @@
}
static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1271 *wl = hw->priv;
@@ -1109,6 +1152,51 @@
}
#endif
+static int wl1271_join_channel(struct wl1271 *wl, int channel)
+{
+ int ret = 0;
+ /* we need to use a dummy BSSID for now */
+ static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
+ 0xad, 0xbe, 0xef };
+
+ /* the dummy join is not required for ad-hoc */
+ if (wl->bss_type == BSS_TYPE_IBSS)
+ goto out;
+
+ /* disable mac filter, so we hear everything */
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+
+ wl->channel = channel;
+ memcpy(wl->bssid, dummy_bssid, ETH_ALEN);
+
+ ret = wl1271_cmd_join(wl);
+ if (ret < 0)
+ goto out;
+
+ set_bit(WL1271_FLAG_JOINED, &wl->flags);
+
+out:
+ return ret;
+}
+
+static int wl1271_unjoin_channel(struct wl1271 *wl)
+{
+ int ret;
+
+ /* to stop listening to a channel, we disconnect */
+ ret = wl1271_cmd_disconnect(wl);
+ if (ret < 0)
+ goto out;
+
+ clear_bit(WL1271_FLAG_JOINED, &wl->flags);
+ wl->channel = 0;
+ memset(wl->bssid, 0, ETH_ALEN);
+ wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+
+out:
+ return ret;
+}
+
static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct wl1271 *wl = hw->priv;
@@ -1117,10 +1205,11 @@
channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
- wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s",
channel,
conf->flags & IEEE80211_CONF_PS ? "on" : "off",
- conf->power_level);
+ conf->power_level,
+ conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use");
mutex_lock(&wl->mutex);
@@ -1130,34 +1219,44 @@
if (ret < 0)
goto out;
- if (channel != wl->channel) {
- /*
- * We assume that the stack will configure the right channel
- * before associating, so we don't need to send a join
- * command here. We will join the right channel when the
- * BSSID changes
- */
- wl->channel = channel;
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (conf->flags & IEEE80211_CONF_IDLE &&
+ test_bit(WL1271_FLAG_JOINED, &wl->flags))
+ wl1271_unjoin_channel(wl);
+ else if (!(conf->flags & IEEE80211_CONF_IDLE))
+ wl1271_join_channel(wl, channel);
+
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
+ wl1271_acx_rate_policies(wl);
+ }
}
- if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
- wl1271_info("psm enabled");
+ /* if the channel changes while joined, join again */
+ if (channel != wl->channel && test_bit(WL1271_FLAG_JOINED, &wl->flags))
+ wl1271_join_channel(wl, channel);
- wl->psm_requested = true;
+ if (conf->flags & IEEE80211_CONF_PS &&
+ !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
+ set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
/*
* We enter PSM only if we're already associated.
* If we're not, we'll enter it when joining an SSID,
* through the bss_info_changed() hook.
*/
- ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
+ wl1271_info("psm enabled");
+ ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ }
} else if (!(conf->flags & IEEE80211_CONF_PS) &&
- wl->psm_requested) {
+ test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
wl1271_info("psm disabled");
- wl->psm_requested = false;
+ clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
- if (wl->psm)
+ if (test_bit(WL1271_FLAG_PSM, &wl->flags))
ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
}
@@ -1440,22 +1539,6 @@
return ret;
}
-static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set)
-{
- struct ieee80211_supported_band *band;
- u32 enabled_rates = 0;
- int bit;
-
- band = wl->hw->wiphy->bands[wl->band];
- for (bit = 0; bit < band->n_bitrates; bit++) {
- if (basic_rate_set & 0x1)
- enabled_rates |= band->bitrates[bit].hw_value;
- basic_rate_set >>= 1;
- }
-
- return enabled_rates;
-}
-
static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
@@ -1473,9 +1556,68 @@
if (ret < 0)
goto out;
+ if ((changed & BSS_CHANGED_BSSID) &&
+ /*
+ * Now we know the correct bssid, so we send a new join command
+ * and enable the BSSID filter
+ */
+ memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+ ret = wl1271_cmd_build_null_data(wl);
+ if (ret < 0) {
+ wl1271_warning("cmd buld null data failed %d",
+ ret);
+ goto out_sleep;
+ }
+ ret = wl1271_cmd_join(wl);
+ if (ret < 0) {
+ wl1271_warning("cmd join failed %d", ret);
+ goto out_sleep;
+ }
+ set_bit(WL1271_FLAG_JOINED, &wl->flags);
+ }
+
+ if (wl->bss_type == BSS_TYPE_IBSS) {
+ /* FIXME: This implements rudimentary ad-hoc support -
+ proper templates are on the wish list and notification
+ on when they change. This patch will update the templates
+ on every call to this function. Also, the firmware will not
+ answer to probe-requests as it does not have the proper
+ SSID set in the JOIN command. The probe-response template
+ is set nevertheless, as the FW will ASSERT without it */
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon) {
+ struct ieee80211_hdr *hdr;
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
+ beacon->data,
+ beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out_sleep;
+ }
+
+ hdr = (struct ieee80211_hdr *) beacon->data;
+ hdr->frame_control = cpu_to_le16(
+ IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_PROBE_RESP);
+
+ ret = wl1271_cmd_template_set(wl,
+ CMD_TEMPL_PROBE_RESPONSE,
+ beacon->data,
+ beacon->len);
+ dev_kfree_skb(beacon);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ }
+
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
wl->aid = bss_conf->aid;
+ set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
/*
* with wl1271, we don't need to update the
@@ -1492,7 +1634,8 @@
goto out_sleep;
/* If we want to go in PSM but we're not there yet */
- if (wl->psm_requested && !wl->psm) {
+ if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) &&
+ !test_bit(WL1271_FLAG_PSM, &wl->flags)) {
mode = STATION_POWER_SAVE_MODE;
ret = wl1271_ps_set_mode(wl, mode);
if (ret < 0)
@@ -1500,7 +1643,7 @@
}
} else {
/* use defaults when not associated */
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+ clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
wl->aid = 0;
}
@@ -1535,17 +1678,6 @@
}
}
- if (changed & BSS_CHANGED_BASIC_RATES) {
- wl->basic_rate_set = wl1271_enabled_rates_get(
- wl, bss_conf->basic_rates);
-
- ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set);
- if (ret < 0) {
- wl1271_warning("Set rate policies failed %d", ret);
- goto out_sleep;
- }
- }
-
out_sleep:
wl1271_ps_elp_sleep(wl);
@@ -1599,19 +1731,19 @@
/* can't be const, mac80211 writes to this */
static struct ieee80211_channel wl1271_channels[] = {
- { .hw_value = 1, .center_freq = 2412},
- { .hw_value = 2, .center_freq = 2417},
- { .hw_value = 3, .center_freq = 2422},
- { .hw_value = 4, .center_freq = 2427},
- { .hw_value = 5, .center_freq = 2432},
- { .hw_value = 6, .center_freq = 2437},
- { .hw_value = 7, .center_freq = 2442},
- { .hw_value = 8, .center_freq = 2447},
- { .hw_value = 9, .center_freq = 2452},
- { .hw_value = 10, .center_freq = 2457},
- { .hw_value = 11, .center_freq = 2462},
- { .hw_value = 12, .center_freq = 2467},
- { .hw_value = 13, .center_freq = 2472},
+ { .hw_value = 1, .center_freq = 2412, .max_power = 25 },
+ { .hw_value = 2, .center_freq = 2417, .max_power = 25 },
+ { .hw_value = 3, .center_freq = 2422, .max_power = 25 },
+ { .hw_value = 4, .center_freq = 2427, .max_power = 25 },
+ { .hw_value = 5, .center_freq = 2432, .max_power = 25 },
+ { .hw_value = 6, .center_freq = 2437, .max_power = 25 },
+ { .hw_value = 7, .center_freq = 2442, .max_power = 25 },
+ { .hw_value = 8, .center_freq = 2447, .max_power = 25 },
+ { .hw_value = 9, .center_freq = 2452, .max_power = 25 },
+ { .hw_value = 10, .center_freq = 2457, .max_power = 25 },
+ { .hw_value = 11, .center_freq = 2462, .max_power = 25 },
+ { .hw_value = 12, .center_freq = 2467, .max_power = 25 },
+ { .hw_value = 13, .center_freq = 2472, .max_power = 25 },
};
/* can't be const, mac80211 writes to this */
@@ -1757,7 +1889,8 @@
IEEE80211_HW_BEACON_FILTER |
IEEE80211_HW_SUPPORTS_PS;
- wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
wl->hw->wiphy->max_scan_ssids = 1;
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
@@ -1818,21 +1951,18 @@
INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
wl->channel = WL1271_DEFAULT_CHANNEL;
- wl->scanning = false;
wl->default_key = 0;
wl->rx_counter = 0;
wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
- wl->elp = false;
- wl->psm = 0;
- wl->psm_requested = false;
wl->psm_entry_retry = 0;
- wl->tx_queue_stopped = false;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+ wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
wl->band = IEEE80211_BAND_2GHZ;
wl->vif = NULL;
- wl->joined = false;
+ wl->flags = 0;
for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
wl->tx_frames[i] = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index 507cd91..e407790 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -39,12 +39,13 @@
mutex_lock(&wl->mutex);
- if (wl->elp || !wl->psm)
+ if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
+ !test_bit(WL1271_FLAG_PSM, &wl->flags))
goto out;
wl1271_debug(DEBUG_PSM, "chip to elp");
wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
- wl->elp = true;
+ set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
out:
mutex_unlock(&wl->mutex);
@@ -55,7 +56,7 @@
/* Routines to toggle sleep mode while in ELP */
void wl1271_ps_elp_sleep(struct wl1271 *wl)
{
- if (wl->psm) {
+ if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
cancel_delayed_work(&wl->elp_work);
ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
msecs_to_jiffies(ELP_ENTRY_DELAY));
@@ -70,7 +71,7 @@
u32 start_time = jiffies;
bool pending = false;
- if (!wl->elp)
+ if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
return 0;
wl1271_debug(DEBUG_PSM, "waking up chip from elp");
@@ -101,7 +102,7 @@
}
}
- wl->elp = false;
+ clear_bit(WL1271_FLAG_IN_ELP, &wl->flags);
wl1271_debug(DEBUG_PSM, "wakeup time: %u ms",
jiffies_to_msecs(jiffies - start_time));
@@ -143,7 +144,7 @@
if (ret < 0)
return ret;
- wl->psm = 1;
+ set_bit(WL1271_FLAG_PSM, &wl->flags);
break;
case STATION_ACTIVE_MODE:
default:
@@ -166,7 +167,7 @@
if (ret < 0)
return ret;
- wl->psm = 0;
+ clear_bit(WL1271_FLAG_PSM, &wl->flags);
break;
}
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index 00af065..a288cc3 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -121,6 +121,11 @@
pad = pad - skb->len;
tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+ /* if the packets are destined for AP (have a STA entry) send them
+ with AP rate policies, otherwise use default basic rates */
+ if (control->control.sta)
+ tx_attr |= ACX_TX_AP_FULL_RATE << TX_HW_ATTR_OFST_RATE_POLICY;
+
desc->tx_attr = cpu_to_le16(tx_attr);
wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
@@ -214,18 +219,50 @@
return ret;
}
+static u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
+{
+ struct ieee80211_supported_band *band;
+ u32 enabled_rates = 0;
+ int bit;
+
+ band = wl->hw->wiphy->bands[wl->band];
+ for (bit = 0; bit < band->n_bitrates; bit++) {
+ if (rate_set & 0x1)
+ enabled_rates |= band->bitrates[bit].hw_value;
+ rate_set >>= 1;
+ }
+
+ return enabled_rates;
+}
+
void wl1271_tx_work(struct work_struct *work)
{
struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
struct sk_buff *skb;
bool woken_up = false;
+ u32 sta_rates = 0;
int ret;
+ /* check if the rates supported by the AP have changed */
+ if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED,
+ &wl->flags))) {
+ unsigned long flags;
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ sta_rates = wl->sta_rate_set;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+ }
+
mutex_lock(&wl->mutex);
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
+ /* if rates have changed, re-configure the rate policy */
+ if (unlikely(sta_rates)) {
+ wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
+ wl1271_acx_rate_policies(wl);
+ }
+
while ((skb = skb_dequeue(&wl->tx_queue))) {
if (!woken_up) {
ret = wl1271_ps_elp_wakeup(wl, false);
@@ -240,18 +277,18 @@
wl1271_debug(DEBUG_TX, "tx_work: fw buffer full, "
"stop queues");
ieee80211_stop_queues(wl->hw);
- wl->tx_queue_stopped = true;
+ set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
skb_queue_head(&wl->tx_queue, skb);
goto out;
} else if (ret < 0) {
dev_kfree_skb(skb);
goto out;
- } else if (wl->tx_queue_stopped) {
+ } else if (test_and_clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED,
+ &wl->flags)) {
/* firmware buffer has space, restart queues */
wl1271_debug(DEBUG_TX,
"complete_packet: waking queues");
ieee80211_wake_queues(wl->hw);
- wl->tx_queue_stopped = false;
}
}
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index dfa1b9bc..7ca95c4 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1325,151 +1325,11 @@
return r;
}
-static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- static const u16 constants[] = {
- 715, 655, 585, 540, 470, 410, 360, 315,
- 270, 235, 205, 175, 150, 125, 105, 85,
- 65, 50, 40, 25, 15
- };
-
- int i;
- u32 x;
-
- /* It seems that their quality parameter is somehow per signal
- * and is now transferred per bit.
- */
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_24M:
- size *= 2;
- break;
- case ZD_OFDM_RATE_9M:
- case ZD_OFDM_RATE_18M:
- case ZD_OFDM_RATE_36M:
- case ZD_OFDM_RATE_54M:
- size *= 4;
- size /= 3;
- break;
- case ZD_OFDM_RATE_48M:
- size *= 3;
- size /= 2;
- break;
- default:
- return -EINVAL;
- }
-
- x = (10000 * status_quality)/size;
- for (i = 0; i < ARRAY_SIZE(constants); i++) {
- if (x > constants[i])
- break;
- }
-
- switch (zd_rate) {
- case ZD_OFDM_RATE_6M:
- case ZD_OFDM_RATE_9M:
- i += 3;
- break;
- case ZD_OFDM_RATE_12M:
- case ZD_OFDM_RATE_18M:
- i += 5;
- break;
- case ZD_OFDM_RATE_24M:
- case ZD_OFDM_RATE_36M:
- i += 9;
- break;
- case ZD_OFDM_RATE_48M:
- case ZD_OFDM_RATE_54M:
- i += 15;
- break;
- default:
- return -EINVAL;
- }
-
- return i;
-}
-
-static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size)
-{
- int r;
-
- r = ofdm_qual_db(status_quality, zd_rate, size);
- ZD_ASSERT(r >= 0);
- if (r < 0)
- r = 0;
-
- r = (r * 100)/29;
- return r <= 100 ? r : 100;
-}
-
-static unsigned int log10times100(unsigned int x)
-{
- static const u8 log10[] = {
- 0,
- 0, 30, 47, 60, 69, 77, 84, 90, 95, 100,
- 104, 107, 111, 114, 117, 120, 123, 125, 127, 130,
- 132, 134, 136, 138, 139, 141, 143, 144, 146, 147,
- 149, 150, 151, 153, 154, 155, 156, 157, 159, 160,
- 161, 162, 163, 164, 165, 166, 167, 168, 169, 169,
- 170, 171, 172, 173, 174, 174, 175, 176, 177, 177,
- 178, 179, 179, 180, 181, 181, 182, 183, 183, 184,
- 185, 185, 186, 186, 187, 188, 188, 189, 189, 190,
- 190, 191, 191, 192, 192, 193, 193, 194, 194, 195,
- 195, 196, 196, 197, 197, 198, 198, 199, 199, 200,
- 200, 200, 201, 201, 202, 202, 202, 203, 203, 204,
- 204, 204, 205, 205, 206, 206, 206, 207, 207, 207,
- 208, 208, 208, 209, 209, 210, 210, 210, 211, 211,
- 211, 212, 212, 212, 213, 213, 213, 213, 214, 214,
- 214, 215, 215, 215, 216, 216, 216, 217, 217, 217,
- 217, 218, 218, 218, 219, 219, 219, 219, 220, 220,
- 220, 220, 221, 221, 221, 222, 222, 222, 222, 223,
- 223, 223, 223, 224, 224, 224, 224,
- };
-
- return x < ARRAY_SIZE(log10) ? log10[x] : 225;
-}
-
-enum {
- MAX_CCK_EVM_DB = 45,
-};
-
-static int cck_evm_db(u8 status_quality)
-{
- return (20 * log10times100(status_quality)) / 100;
-}
-
-static int cck_snr_db(u8 status_quality)
-{
- int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality);
- ZD_ASSERT(r >= 0);
- return r;
-}
-
-static int cck_qual_percent(u8 status_quality)
-{
- int r;
-
- r = cck_snr_db(status_quality);
- r = (100*r)/17;
- return r <= 100 ? r : 100;
-}
-
static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame)
{
return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame);
}
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status)
-{
- return (status->frame_status&ZD_RX_OFDM) ?
- ofdm_qual_percent(status->signal_quality_ofdm,
- zd_rate_from_ofdm_plcp_header(rx_frame),
- size) :
- cck_qual_percent(status->signal_quality_cck);
-}
-
/**
* zd_rx_rate - report zd-rate
* @rx_frame - received frame
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 9fd8f35..f8bbf7d 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -929,9 +929,6 @@
struct rx_status;
-u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
- const struct rx_status *status);
-
u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
struct zd_mc_hash {
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index cf51e8f..709fe5e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -828,9 +828,6 @@
stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
stats.band = IEEE80211_BAND_2GHZ;
stats.signal = status->signal_strength;
- stats.qual = zd_rx_qual_percent(buffer,
- length - sizeof(struct rx_status),
- status);
rate = zd_rx_rate(buffer, status);
@@ -872,7 +869,7 @@
}
static int zd_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct zd_mac *mac = zd_hw_mac(hw);
@@ -880,22 +877,22 @@
if (mac->type != NL80211_IFTYPE_UNSPECIFIED)
return -EOPNOTSUPP;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- mac->type = conf->type;
+ mac->type = vif->type;
break;
default:
return -EOPNOTSUPP;
}
- return zd_write_mac_addr(&mac->chip, conf->mac_addr);
+ return zd_write_mac_addr(&mac->chip, vif->addr);
}
static void zd_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct zd_mac *mac = zd_hw_mac(hw);
mac->type = NL80211_IFTYPE_UNSPECIFIED;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d62edc7..aeea282 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1085,12 +1085,12 @@
WLAN_EID_TIM = 5,
WLAN_EID_IBSS_PARAMS = 6,
WLAN_EID_CHALLENGE = 16,
- /* 802.11d */
+
WLAN_EID_COUNTRY = 7,
WLAN_EID_HP_PARAMS = 8,
WLAN_EID_HP_TABLE = 9,
WLAN_EID_REQUEST = 10,
- /* 802.11e */
+
WLAN_EID_QBSS_LOAD = 11,
WLAN_EID_EDCA_PARAM_SET = 12,
WLAN_EID_TSPEC = 13,
@@ -1113,7 +1113,7 @@
WLAN_EID_PREP = 69,
WLAN_EID_PERR = 70,
WLAN_EID_RANN = 49, /* compatible with FreeBSD */
- /* 802.11h */
+
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
WLAN_EID_TPC_REQUEST = 34,
@@ -1124,20 +1124,41 @@
WLAN_EID_MEASURE_REPORT = 39,
WLAN_EID_QUIET = 40,
WLAN_EID_IBSS_DFS = 41,
- /* 802.11g */
+
WLAN_EID_ERP_INFO = 42,
WLAN_EID_EXT_SUPP_RATES = 50,
- /* 802.11n */
+
WLAN_EID_HT_CAPABILITY = 45,
WLAN_EID_HT_INFORMATION = 61,
- /* 802.11i */
+
WLAN_EID_RSN = 48,
- WLAN_EID_TIMEOUT_INTERVAL = 56,
- WLAN_EID_MMIE = 76 /* 802.11w */,
+ WLAN_EID_MMIE = 76,
WLAN_EID_WPA = 221,
WLAN_EID_GENERIC = 221,
WLAN_EID_VENDOR_SPECIFIC = 221,
- WLAN_EID_QOS_PARAMETER = 222
+ WLAN_EID_QOS_PARAMETER = 222,
+
+ WLAN_EID_AP_CHAN_REPORT = 51,
+ WLAN_EID_NEIGHBOR_REPORT = 52,
+ WLAN_EID_RCPI = 53,
+ WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
+ WLAN_EID_ANTENNA_INFO = 64,
+ WLAN_EID_RSNI = 65,
+ WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
+ WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
+ WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
+ WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
+ WLAN_EID_MULTIPLE_BSSID = 71,
+
+ WLAN_EID_MOBILITY_DOMAIN = 54,
+ WLAN_EID_FAST_BSS_TRANSITION = 55,
+ WLAN_EID_TIMEOUT_INTERVAL = 56,
+ WLAN_EID_RIC_DATA = 57,
+ WLAN_EID_RIC_DESCRIPTOR = 75,
+
+ WLAN_EID_DSE_REGISTERED_LOCATION = 58,
+ WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
+ WLAN_EID_EXT_CHANSWITCH_ANN = 60,
};
/* Action category code */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index da8ea2e..2bfbe88 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -270,6 +270,31 @@
* @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
* associated with this wiphy must be down and will follow.
*
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ * channel for the specified amount of time. This can be used to do
+ * off-channel operations like transmit a Public Action frame and wait for
+ * a response while being associated to an AP on another channel.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+ * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ * optionally used to specify additional channel parameters.
+ * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ * to remain on the channel. This command is also used as an event to
+ * notify when the requested duration starts (it may take a while for the
+ * driver to schedule this time due to other concurrent needs for the
+ * radio).
+ * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ * that will be included with any events pertaining to this request;
+ * the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ * pending remain-on-channel duration if the desired operation has been
+ * completed prior to expiration of the originally requested duration.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ * uniquely identify the request.
+ * This command is also used as an event to notify when a requested
+ * remain-on-channel duration has expired.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -353,6 +378,9 @@
NL80211_CMD_DEL_PMKSA,
NL80211_CMD_FLUSH_PMKSA,
+ NL80211_CMD_REMAIN_ON_CHANNEL,
+ NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -606,6 +634,10 @@
* @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
* cache, a wiphy attribute.
*
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -743,6 +775,10 @@
NL80211_ATTR_PMKID,
NL80211_ATTR_MAX_NUM_PMKIDS,
+ NL80211_ATTR_DURATION,
+
+ NL80211_ATTR_COOKIE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 542a477..add7993 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -988,6 +988,15 @@
*
* @dump_survey: get site survey information.
*
+ * @remain_on_channel: Request the driver to remain awake on the specified
+ * channel for the specified duration to complete an off-channel
+ * operation (e.g., public action frame exchange). When the driver is
+ * ready on the requested channel, it must indicate this with an event
+ * notification by calling cfg80211_ready_on_channel().
+ * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
+ * This allows the operation to be terminated prior to timeout based on
+ * the duration value.
+ *
* @testmode_cmd: run a test mode command
*
* @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
@@ -1123,6 +1132,16 @@
struct cfg80211_pmksa *pmksa);
int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+ int (*remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration,
+ u64 *cookie);
+ int (*cancel_remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ u64 cookie);
+
/* some temporary stuff to finish wext */
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
@@ -2147,5 +2166,45 @@
void cfg80211_disconnected(struct net_device *dev, u16 reason,
u8 *ie, size_t ie_len, gfp_t gfp);
+/**
+ * cfg80211_ready_on_channel - notification of remain_on_channel start
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @duration: Duration in milliseconds that the driver intents to remain on the
+ * channel
+ * @gfp: allocation flags
+ */
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp);
+
+/**
+ * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @gfp: allocation flags
+ */
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+ u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ gfp_t gfp);
+
+
+/**
+ * cfg80211_new_sta - notify userspace about station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information
+ * @gfp: allocation flags
+ */
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
#endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 494ac69..f073a2a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -547,7 +547,6 @@
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
* @noise: noise when receiving this frame, in dBm.
- * @qual: overall signal quality indication, in percent (0-100).
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT rates are use (RX_FLAG_HT)
@@ -559,7 +558,6 @@
int freq;
int signal;
int noise;
- int __deprecated qual;
int antenna;
int rate_idx;
int flag;
@@ -702,33 +700,6 @@
}
/**
- * struct ieee80211_if_init_conf - initial configuration of an interface
- *
- * @vif: pointer to a driver-use per-interface structure. The pointer
- * itself is also used for various functions including
- * ieee80211_beacon_get() and ieee80211_get_buffered_bc().
- * @type: one of &enum nl80211_iftype constants. Determines the type of
- * added/removed interface.
- * @mac_addr: pointer to MAC address of the interface. This pointer is valid
- * until the interface is removed (i.e. it cannot be used after
- * remove_interface() callback was called for this interface).
- *
- * This structure is used in add_interface() and remove_interface()
- * callbacks of &struct ieee80211_hw.
- *
- * When you allow multiple interfaces to be added to your PHY, take care
- * that the hardware can actually handle multiple MAC addresses. However,
- * also take care that when there's no interface left with mac_addr != %NULL
- * you remove the MAC address from the device to avoid acknowledging packets
- * in pure monitor mode.
- */
-struct ieee80211_if_init_conf {
- enum nl80211_iftype type;
- struct ieee80211_vif *vif;
- void *mac_addr;
-};
-
-/**
* enum ieee80211_key_alg - key algorithm
* @ALG_WEP: WEP40 or WEP104
* @ALG_TKIP: TKIP
@@ -1410,7 +1381,7 @@
* When the device is started it should not have a MAC address
* to avoid acknowledging frames before a non-monitor device
* is added.
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @stop: Called after last netdevice attached to the hardware
* is disabled. This should turn off the hardware (at least
@@ -1418,7 +1389,7 @@
* May be called right after add_interface if that rejects
* an interface. If you added any work onto the mac80211 workqueue
* you should ensure to cancel it on this callback.
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
@@ -1428,7 +1399,7 @@
* interface is given in the conf parameter.
* The callback may refuse to add an interface by returning a
* negative error code (which will be seen in userspace.)
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @remove_interface: Notifies a driver that an interface is going down.
* The @stop callback is called after this if it is the last interface
@@ -1437,19 +1408,20 @@
* must be cleared so the device no longer acknowledges packets,
* the mac_addr member of the conf structure is, however, set to the
* MAC address of the device going away.
- * Hence, this callback must be implemented.
+ * Hence, this callback must be implemented. It can sleep.
*
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
- * if it does.
+ * if it does. The callback can sleep.
*
* @bss_info_changed: Handler for configuration requests related to BSS
* parameters that may vary during BSS's lifespan, and may affect low
* level driver (e.g. assoc/disassoc status, erp parameters).
* This function should not be used if no BSS has been set, unless
* for association indication. The @changed parameter indicates which
- * of the bss parameters has changed when a call is made.
+ * of the bss parameters has changed when a call is made. The callback
+ * can sleep.
*
* @prepare_multicast: Prepare for multicast filter configuration.
* This callback is optional, and its return value is passed
@@ -1457,20 +1429,22 @@
*
* @configure_filter: Configure the device's RX filter.
* See the section "Frame filtering" for more information.
- * This callback must be implemented.
+ * This callback must be implemented and can sleep.
*
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
* @set_key: See the section "Hardware crypto acceleration"
- * This callback can sleep, and is only called between add_interface
- * and remove_interface calls, i.e. while the given virtual interface
+ * This callback is only called between add_interface and
+ * remove_interface calls, i.e. while the given virtual interface
* is enabled.
* Returns a negative error code if the key can't be added.
+ * The callback can sleep.
*
* @update_tkip_key: See the section "Hardware crypto acceleration"
* This callback will be called in the context of Rx. Called for drivers
* which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
+ * The callback can sleep.
*
* @hw_scan: Ask the hardware to service the scan request, no need to start
* the scan state machine in stack. The scan must honour the channel
@@ -1484,21 +1458,28 @@
* When the scan finishes, ieee80211_scan_completed() must be called;
* note that it also must be called when the scan cannot finish due to
* any error unless this callback returned a negative error code.
+ * The callback can sleep.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
+ * The callback can sleep.
*
- * @sw_scan_complete: Notifier function that is called just after a software scan
- * finished. Can be NULL, if the driver doesn't need this notification.
+ * @sw_scan_complete: Notifier function that is called just after a
+ * software scan finished. Can be NULL, if the driver doesn't need
+ * this notification.
+ * The callback can sleep.
*
* @get_stats: Return low-level statistics.
* Returns zero if statistics are available.
+ * The callback can sleep.
*
* @get_tkip_seq: If your device implements TKIP encryption in hardware this
* callback should be provided to read the TKIP transmit IVs (both IV32
* and IV16) for the given key from hardware.
+ * The callback must be atomic.
*
* @set_rts_threshold: Configuration of RTS threshold (if device needs it)
+ * The callback can sleep.
*
* @sta_notify: Notifies low level driver about addition, removal or power
* state transition of an associated station, AP, IBSS/WDS/mesh peer etc.
@@ -1507,30 +1488,36 @@
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
* Returns a negative error code on failure.
+ * The callback can sleep.
*
* @get_tx_stats: Get statistics of the current TX queue status. This is used
* to get number of currently queued packets (queue length), maximum queue
* size (limit), and total number of packets sent using each TX queue
* (count). The 'stats' pointer points to an array that has hw->queues
* items.
+ * The callback must be atomic.
*
* @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
* this is only used for IBSS mode BSSID merging and debugging. Is not a
* required function.
+ * The callback can sleep.
*
* @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
* Currently, this is only used for IBSS mode debugging. Is not a
* required function.
+ * The callback can sleep.
*
* @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
* with other STAs in the IBSS. This is only used in IBSS mode. This
* function is optional if the firmware/hardware takes full care of
* TSF synchronization.
+ * The callback can sleep.
*
* @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
* This is needed only for IBSS mode and the result of this function is
* used to determine whether to reply to Probe Requests.
* Returns non-zero if this device sent the last beacon.
+ * The callback can sleep.
*
* @ampdu_action: Perform a certain A-MPDU action
* The RA/TID combination determines the destination and TID we want
@@ -1539,21 +1526,28 @@
* is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
* Returns a negative error code on failure.
+ * The callback must be atomic.
*
* @rfkill_poll: Poll rfkill hardware state. If you need this, you also
* need to set wiphy->rfkill_poll to %true before registration,
* and need to call wiphy_rfkill_set_hw_state() in the callback.
+ * The callback can sleep.
*
* @testmode_cmd: Implement a cfg80211 test mode command.
+ * The callback can sleep.
+ *
+ * @flush: Flush all pending frames from the hardware queue, making sure
+ * that the hardware queues are empty. If the parameter @drop is set
+ * to %true, pending frames may be dropped. The callback can sleep.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
int (*add_interface)(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
void (*remove_interface)(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
int (*config)(struct ieee80211_hw *hw, u32 changed);
void (*bss_info_changed)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -1601,6 +1595,7 @@
#ifdef CONFIG_NL80211_TESTMODE
int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
#endif
+ void (*flush)(struct ieee80211_hw *hw, bool drop);
};
/**
@@ -1840,7 +1835,7 @@
/**
* ieee80211_beacon_get_tim - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @tim_offset: pointer to variable that will receive the TIM IE offset.
* Set to 0 if invalid (in non-AP modes).
* @tim_length: pointer to variable that will receive the TIM IE length,
@@ -1868,7 +1863,7 @@
/**
* ieee80211_beacon_get - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* See ieee80211_beacon_get_tim().
*/
@@ -1881,7 +1876,7 @@
/**
* ieee80211_rts_get - RTS frame generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the RTS.
* @frame_len: the frame length (in octets).
* @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1900,7 +1895,7 @@
/**
* ieee80211_rts_duration - Get the duration field for an RTS frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the RTS.
* @frame_txctl: &struct ieee80211_tx_info of the frame.
*
@@ -1915,7 +1910,7 @@
/**
* ieee80211_ctstoself_get - CTS-to-self frame generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the CTS-to-self.
* @frame_len: the frame length (in octets).
* @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1935,7 +1930,7 @@
/**
* ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
* @frame_txctl: &struct ieee80211_tx_info of the frame.
*
@@ -1951,7 +1946,7 @@
/**
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
@@ -1966,7 +1961,7 @@
/**
* ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
* @hw: pointer as obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* Function for accessing buffered broadcast and multicast frames. If
* hardware/firmware does not implement buffering of broadcast/multicast
@@ -2134,7 +2129,7 @@
/**
* ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2145,7 +2140,7 @@
/**
* ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2173,7 +2168,7 @@
/**
* ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2184,7 +2179,7 @@
/**
* ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2263,7 +2258,7 @@
/**
* ieee80211_beacon_loss - inform hardware does not receive beacons
*
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* When beacon filtering is enabled with IEEE80211_HW_BEACON_FILTERING and
* IEEE80211_CONF_PS is set, the driver needs to inform whenever the
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 298cfcc..0442029 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -6,10 +6,10 @@
sta_info.o \
wep.o \
wpa.o \
- scan.o \
+ scan.o offchannel.o \
ht.o agg-tx.o agg-rx.o \
ibss.o \
- mlme.o \
+ mlme.o work.o \
iface.o \
rate.o \
michael.o \
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 63843e3..2e5e841 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -78,17 +78,15 @@
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
- struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret;
- if (netif_running(dev))
+ if (ieee80211_sdata_running(sdata))
return -EBUSY;
if (!nl80211_params_check(type, params))
return -EINVAL;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
ret = ieee80211_if_change_type(sdata, type);
if (ret)
return ret;
@@ -1345,7 +1343,7 @@
return 0;
}
- ap = sdata->u.mgd.associated->cbss.bssid;
+ ap = sdata->u.mgd.associated->bssid;
if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
if (sdata->u.mgd.powersave)
@@ -1443,6 +1441,28 @@
return -EINVAL;
}
+static int ieee80211_remain_on_channel(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration,
+ u64 *cookie)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ return ieee80211_wk_remain_on_channel(sdata, chan, channel_type,
+ duration, cookie);
+}
+
+static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy,
+ struct net_device *dev,
+ u64 cookie)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ return ieee80211_wk_cancel_remain_on_channel(sdata, cookie);
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -1489,4 +1509,6 @@
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
.set_power_mgmt = ieee80211_set_power_mgmt,
.set_bitrate_mask = ieee80211_set_bitrate_mask,
+ .remain_on_channel = ieee80211_remain_on_channel,
+ .cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
};
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 3559835..59f6e3b 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -133,7 +133,6 @@
/* STA attributes */
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
-IEEE80211_IF_FILE(capab, u.mgd.capab, HEX);
static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps_mode)
@@ -270,7 +269,6 @@
DEBUGFS_ADD(bssid, sta);
DEBUGFS_ADD(aid, sta);
- DEBUGFS_ADD(capab, sta);
DEBUGFS_ADD_MODE(smps, 0600);
}
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 727e4cf..8757ea7 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -14,6 +14,8 @@
{
int ret;
+ might_sleep();
+
local->started = true;
smp_mb();
ret = local->ops->start(&local->hw);
@@ -23,6 +25,8 @@
static inline void drv_stop(struct ieee80211_local *local)
{
+ might_sleep();
+
local->ops->stop(&local->hw);
trace_drv_stop(local);
@@ -36,23 +40,33 @@
}
static inline int drv_add_interface(struct ieee80211_local *local,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
- int ret = local->ops->add_interface(&local->hw, conf);
- trace_drv_add_interface(local, vif_to_sdata(conf->vif), ret);
+ int ret;
+
+ might_sleep();
+
+ ret = local->ops->add_interface(&local->hw, vif);
+ trace_drv_add_interface(local, vif_to_sdata(vif), ret);
return ret;
}
static inline void drv_remove_interface(struct ieee80211_local *local,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
- local->ops->remove_interface(&local->hw, conf);
- trace_drv_remove_interface(local, vif_to_sdata(conf->vif));
+ might_sleep();
+
+ local->ops->remove_interface(&local->hw, vif);
+ trace_drv_remove_interface(local, vif_to_sdata(vif));
}
static inline int drv_config(struct ieee80211_local *local, u32 changed)
{
- int ret = local->ops->config(&local->hw, changed);
+ int ret;
+
+ might_sleep();
+
+ ret = local->ops->config(&local->hw, changed);
trace_drv_config(local, changed, ret);
return ret;
}
@@ -62,6 +76,8 @@
struct ieee80211_bss_conf *info,
u32 changed)
{
+ might_sleep();
+
if (local->ops->bss_info_changed)
local->ops->bss_info_changed(&local->hw, &sdata->vif, info, changed);
trace_drv_bss_info_changed(local, sdata, info, changed);
@@ -111,7 +127,11 @@
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
- int ret = local->ops->set_key(&local->hw, cmd, &sdata->vif, sta, key);
+ int ret;
+
+ might_sleep();
+
+ ret = local->ops->set_key(&local->hw, cmd, &sdata->vif, sta, key);
trace_drv_set_key(local, cmd, sdata, sta, key, ret);
return ret;
}
@@ -121,6 +141,8 @@
const u8 *address, u32 iv32,
u16 *phase1key)
{
+ might_sleep();
+
if (local->ops->update_tkip_key)
local->ops->update_tkip_key(&local->hw, conf, address,
iv32, phase1key);
@@ -130,13 +152,19 @@
static inline int drv_hw_scan(struct ieee80211_local *local,
struct cfg80211_scan_request *req)
{
- int ret = local->ops->hw_scan(&local->hw, req);
+ int ret;
+
+ might_sleep();
+
+ ret = local->ops->hw_scan(&local->hw, req);
trace_drv_hw_scan(local, req, ret);
return ret;
}
static inline void drv_sw_scan_start(struct ieee80211_local *local)
{
+ might_sleep();
+
if (local->ops->sw_scan_start)
local->ops->sw_scan_start(&local->hw);
trace_drv_sw_scan_start(local);
@@ -144,6 +172,8 @@
static inline void drv_sw_scan_complete(struct ieee80211_local *local)
{
+ might_sleep();
+
if (local->ops->sw_scan_complete)
local->ops->sw_scan_complete(&local->hw);
trace_drv_sw_scan_complete(local);
@@ -154,6 +184,8 @@
{
int ret = -EOPNOTSUPP;
+ might_sleep();
+
if (local->ops->get_stats)
ret = local->ops->get_stats(&local->hw, stats);
trace_drv_get_stats(local, stats, ret);
@@ -173,6 +205,9 @@
u32 value)
{
int ret = 0;
+
+ might_sleep();
+
if (local->ops->set_rts_threshold)
ret = local->ops->set_rts_threshold(&local->hw, value);
trace_drv_set_rts_threshold(local, value, ret);
@@ -193,6 +228,9 @@
const struct ieee80211_tx_queue_params *params)
{
int ret = -EOPNOTSUPP;
+
+ might_sleep();
+
if (local->ops->conf_tx)
ret = local->ops->conf_tx(&local->hw, queue, params);
trace_drv_conf_tx(local, queue, params, ret);
@@ -210,6 +248,9 @@
static inline u64 drv_get_tsf(struct ieee80211_local *local)
{
u64 ret = -1ULL;
+
+ might_sleep();
+
if (local->ops->get_tsf)
ret = local->ops->get_tsf(&local->hw);
trace_drv_get_tsf(local, ret);
@@ -218,6 +259,8 @@
static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf)
{
+ might_sleep();
+
if (local->ops->set_tsf)
local->ops->set_tsf(&local->hw, tsf);
trace_drv_set_tsf(local, tsf);
@@ -225,6 +268,8 @@
static inline void drv_reset_tsf(struct ieee80211_local *local)
{
+ might_sleep();
+
if (local->ops->reset_tsf)
local->ops->reset_tsf(&local->hw);
trace_drv_reset_tsf(local);
@@ -233,6 +278,9 @@
static inline int drv_tx_last_beacon(struct ieee80211_local *local)
{
int ret = 1;
+
+ might_sleep();
+
if (local->ops->tx_last_beacon)
ret = local->ops->tx_last_beacon(&local->hw);
trace_drv_tx_last_beacon(local, ret);
@@ -256,7 +304,18 @@
static inline void drv_rfkill_poll(struct ieee80211_local *local)
{
+ might_sleep();
+
if (local->ops->rfkill_poll)
local->ops->rfkill_poll(&local->hw);
}
+
+static inline void drv_flush(struct ieee80211_local *local, bool drop)
+{
+ might_sleep();
+
+ trace_drv_flush(local, drop);
+ if (local->ops->flush)
+ local->ops->flush(&local->hw, drop);
+}
#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 7a849b9..977cc75 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -690,6 +690,27 @@
LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->action, __entry->tid, __entry->ret
)
);
+
+TRACE_EVENT(drv_flush,
+ TP_PROTO(struct ieee80211_local *local, bool drop),
+
+ TP_ARGS(local, drop),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(bool, drop)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->drop = drop;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " drop:%d",
+ LOCAL_PR_ARG, __entry->drop
+ )
+);
#endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index ef6c6b2..5bcde4c 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -187,15 +187,17 @@
static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss *bss)
{
+ struct cfg80211_bss *cbss =
+ container_of((void *)bss, struct cfg80211_bss, priv);
struct ieee80211_supported_band *sband;
u32 basic_rates;
int i, j;
- u16 beacon_int = bss->cbss.beacon_interval;
+ u16 beacon_int = cbss->beacon_interval;
if (beacon_int < 10)
beacon_int = 10;
- sband = sdata->local->hw.wiphy->bands[bss->cbss.channel->band];
+ sband = sdata->local->hw.wiphy->bands[cbss->channel->band];
basic_rates = 0;
@@ -212,12 +214,12 @@
}
}
- __ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
+ __ieee80211_sta_join_ibss(sdata, cbss->bssid,
beacon_int,
- bss->cbss.channel,
+ cbss->channel,
basic_rates,
- bss->cbss.capability,
- bss->cbss.tsf);
+ cbss->capability,
+ cbss->tsf);
}
static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
@@ -229,6 +231,7 @@
{
struct ieee80211_local *local = sdata->local;
int freq;
+ struct cfg80211_bss *cbss;
struct ieee80211_bss *bss;
struct sta_info *sta;
struct ieee80211_channel *channel;
@@ -283,8 +286,10 @@
if (!bss)
return;
+ cbss = container_of((void *)bss, struct cfg80211_bss, priv);
+
/* was just updated in ieee80211_bss_info_update */
- beacon_timestamp = bss->cbss.tsf;
+ beacon_timestamp = cbss->tsf;
/* check if we need to merge IBSS */
@@ -297,11 +302,11 @@
goto put_bss;
/* not an IBSS */
- if (!(bss->cbss.capability & WLAN_CAPABILITY_IBSS))
+ if (!(cbss->capability & WLAN_CAPABILITY_IBSS))
goto put_bss;
/* different channel */
- if (bss->cbss.channel != local->oper_channel)
+ if (cbss->channel != local->oper_channel)
goto put_bss;
/* different SSID */
@@ -311,7 +316,7 @@
goto put_bss;
/* same BSSID */
- if (memcmp(bss->cbss.bssid, sdata->u.ibss.bssid, ETH_ALEN) == 0)
+ if (memcmp(cbss->bssid, sdata->u.ibss.bssid, ETH_ALEN) == 0)
goto put_bss;
if (rx_status->flag & RX_FLAG_TSFT) {
@@ -382,6 +387,7 @@
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid,u8 *addr, u32 supp_rates)
{
+ struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int band = local->hw.conf.channel->band;
@@ -397,6 +403,9 @@
return NULL;
}
+ if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH)
+ return NULL;
+
if (compare_ether_addr(bssid, sdata->u.ibss.bssid))
return NULL;
@@ -514,7 +523,7 @@
{
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
- struct ieee80211_bss *bss;
+ struct cfg80211_bss *cbss;
struct ieee80211_channel *chan = NULL;
const u8 *bssid = NULL;
int active_ibss;
@@ -538,21 +547,23 @@
chan = ifibss->channel;
if (!is_zero_ether_addr(ifibss->bssid))
bssid = ifibss->bssid;
- bss = (void *)cfg80211_get_bss(local->hw.wiphy, chan, bssid,
- ifibss->ssid, ifibss->ssid_len,
- WLAN_CAPABILITY_IBSS |
- WLAN_CAPABILITY_PRIVACY,
- capability);
+ cbss = cfg80211_get_bss(local->hw.wiphy, chan, bssid,
+ ifibss->ssid, ifibss->ssid_len,
+ WLAN_CAPABILITY_IBSS | WLAN_CAPABILITY_PRIVACY,
+ capability);
- if (bss) {
+ if (cbss) {
+ struct ieee80211_bss *bss;
+
+ bss = (void *)cbss->priv;
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " sta_find_ibss: selected %pM current "
- "%pM\n", bss->cbss.bssid, ifibss->bssid);
+ "%pM\n", cbss->bssid, ifibss->bssid);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
" based on configured SSID\n",
- sdata->name, bss->cbss.bssid);
+ sdata->name, cbss->bssid);
ieee80211_sta_join_ibss(sdata, bss);
ieee80211_rx_bss_put(local, bss);
@@ -744,7 +755,7 @@
if (WARN_ON(local->suspended))
return;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
return;
if (local->scanning)
@@ -827,7 +838,7 @@
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
continue;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 88b0ba6..a27921e 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -71,9 +71,6 @@
struct ieee80211_bss {
- /* Yes, this is a hack */
- struct cfg80211_bss cbss;
-
/* don't want to look up all the time */
size_t ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
@@ -227,31 +224,78 @@
u8 flags;
};
-enum ieee80211_mgd_state {
- IEEE80211_MGD_STATE_IDLE,
- IEEE80211_MGD_STATE_PROBE,
- IEEE80211_MGD_STATE_AUTH,
- IEEE80211_MGD_STATE_ASSOC,
+enum ieee80211_work_type {
+ IEEE80211_WORK_ABORT,
+ IEEE80211_WORK_DIRECT_PROBE,
+ IEEE80211_WORK_AUTH,
+ IEEE80211_WORK_ASSOC,
+ IEEE80211_WORK_REMAIN_ON_CHANNEL,
};
-struct ieee80211_mgd_work {
+/**
+ * enum work_done_result - indicates what to do after work was done
+ *
+ * @WORK_DONE_DESTROY: This work item is no longer needed, destroy.
+ * @WORK_DONE_REQUEUE: This work item was reset to be reused, and
+ * should be requeued.
+ */
+enum work_done_result {
+ WORK_DONE_DESTROY,
+ WORK_DONE_REQUEUE,
+};
+
+struct ieee80211_work {
struct list_head list;
- struct ieee80211_bss *bss;
- int ie_len;
- u8 prev_bssid[ETH_ALEN];
- u8 ssid[IEEE80211_MAX_SSID_LEN];
- u8 ssid_len;
+
+ struct rcu_head rcu_head;
+
+ struct ieee80211_sub_if_data *sdata;
+
+ enum work_done_result (*done)(struct ieee80211_work *wk,
+ struct sk_buff *skb);
+
+ struct ieee80211_channel *chan;
+ enum nl80211_channel_type chan_type;
+
unsigned long timeout;
- enum ieee80211_mgd_state state;
- u16 auth_alg, auth_transaction;
+ enum ieee80211_work_type type;
- int tries;
+ u8 filter_ta[ETH_ALEN];
- u8 key[WLAN_KEY_LEN_WEP104];
- u8 key_len, key_idx;
+ bool started;
+ union {
+ struct {
+ int tries;
+ u16 algorithm, transaction;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ u8 key[WLAN_KEY_LEN_WEP104];
+ u8 key_len, key_idx;
+ bool privacy;
+ } probe_auth;
+ struct {
+ struct cfg80211_bss *bss;
+ const u8 *supp_rates;
+ const u8 *ht_information_ie;
+ enum ieee80211_smps_mode smps;
+ int tries;
+ u16 capability;
+ u8 prev_bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ u8 supp_rates_len;
+ bool wmm_used, use_11n;
+ } assoc;
+ struct {
+ u32 duration;
+ bool started;
+ } remain;
+ };
+
+ int ie_len;
/* must be last */
- u8 ie[0]; /* for auth or assoc frame, not probe */
+ u8 ie[0];
};
/* flags used in struct ieee80211_if_managed.flags */
@@ -259,17 +303,11 @@
IEEE80211_STA_BEACON_POLL = BIT(0),
IEEE80211_STA_CONNECTION_POLL = BIT(1),
IEEE80211_STA_CONTROL_PORT = BIT(2),
- IEEE80211_STA_WMM_ENABLED = BIT(3),
IEEE80211_STA_DISABLE_11N = BIT(4),
IEEE80211_STA_CSA_RECEIVED = BIT(5),
IEEE80211_STA_MFP_ENABLED = BIT(6),
};
-/* flags for MLME request */
-enum ieee80211_sta_request {
- IEEE80211_STA_REQ_SCAN,
-};
-
struct ieee80211_if_managed {
struct timer_list timer;
struct timer_list conn_mon_timer;
@@ -284,14 +322,11 @@
int probe_send_count;
struct mutex mtx;
- struct ieee80211_bss *associated;
- struct ieee80211_mgd_work *old_associate_work;
- struct list_head work_list;
+ struct cfg80211_bss *associated;
u8 bssid[ETH_ALEN];
u16 aid;
- u16 capab;
struct sk_buff_head skb_queue;
@@ -300,8 +335,6 @@
enum ieee80211_smps_mode req_smps, /* requested smps mode */
ap_smps; /* smps mode AP thinks we're in */
- unsigned long request;
-
unsigned int flags;
u32 beacon_crc;
@@ -568,6 +601,15 @@
const struct ieee80211_ops *ops;
/*
+ * work stuff, potentially off-channel (in the future)
+ */
+ struct mutex work_mtx;
+ struct list_head work_list;
+ struct timer_list work_timer;
+ struct work_struct work_work;
+ struct sk_buff_head work_skb_queue;
+
+ /*
* private workqueue to mac80211. mac80211 makes this accessible
* via ieee80211_queue_work()
*/
@@ -695,6 +737,10 @@
enum nl80211_channel_type oper_channel_type;
struct ieee80211_channel *oper_channel, *csa_channel;
+ /* Temporary remain-on-channel for off-channel operations */
+ struct ieee80211_channel *tmp_channel;
+ enum nl80211_channel_type tmp_channel_type;
+
/* SNMP counters */
/* dot11CountersTable */
u32 dot11TransmittedFragmentCount;
@@ -752,7 +798,7 @@
unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
bool pspolling;
- bool scan_ps_enabled;
+ bool offchannel_ps_enabled;
/*
* PS can only be enabled when we have exactly one managed
* interface (and monitors) in PS, this then points there.
@@ -947,6 +993,12 @@
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
+/* off-channel helpers */
+void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local);
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local);
+void ieee80211_offchannel_return(struct ieee80211_local *local,
+ bool enable_beaconing);
+
/* interface handling */
int ieee80211_iface_init(void);
void ieee80211_iface_exit(void);
@@ -960,6 +1012,11 @@
u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
void ieee80211_recalc_idle(struct ieee80211_local *local);
+static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata)
+{
+ return netif_running(sdata->dev);
+}
+
/* tx handling */
void ieee80211_clear_tx_pending(struct ieee80211_local *local);
void ieee80211_tx_pending(unsigned long data);
@@ -1106,6 +1163,24 @@
void ieee80211_recalc_smps(struct ieee80211_local *local,
struct ieee80211_sub_if_data *forsdata);
+size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
+ const u8 *ids, int n_ids, size_t offset);
+size_t ieee80211_ie_split_vendor(const u8 *ies, size_t ielen, size_t offset);
+
+/* internal work items */
+void ieee80211_work_init(struct ieee80211_local *local);
+void ieee80211_add_work(struct ieee80211_work *wk);
+void free_work(struct ieee80211_work *wk);
+void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata);
+ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb);
+int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, u64 *cookie);
+int ieee80211_wk_cancel_remain_on_channel(
+ struct ieee80211_sub_if_data *sdata, u64 cookie);
+
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
#else
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index a6e6da3..00a1f4c 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -65,7 +65,7 @@
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret;
- if (netif_running(dev))
+ if (ieee80211_sdata_running(sdata))
return -EBUSY;
ret = eth_mac_addr(dev, addr);
@@ -96,7 +96,6 @@
struct ieee80211_sub_if_data *nsdata;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- struct ieee80211_if_init_conf conf;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
@@ -111,7 +110,7 @@
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
- if (ndev != dev && netif_running(ndev)) {
+ if (ndev != dev && ieee80211_sdata_running(nsdata)) {
/*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
@@ -197,7 +196,7 @@
struct net_device *ndev = nsdata->dev;
/*
- * No need to check netif_running since we do not allow
+ * No need to check running since we do not allow
* it to start up with this invalid address.
*/
if (compare_ether_addr(null_addr, ndev->dev_addr) == 0) {
@@ -248,10 +247,7 @@
ieee80211_configure_filter(local);
break;
default:
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->vif.addr;
- res = drv_add_interface(local, &conf);
+ res = drv_add_interface(local, &sdata->vif);
if (res)
goto err_stop;
@@ -334,7 +330,7 @@
return 0;
err_del_interface:
- drv_remove_interface(local, &conf);
+ drv_remove_interface(local, &sdata->vif);
err_stop:
if (!local->open_count)
drv_stop(local);
@@ -349,7 +345,6 @@
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_init_conf conf;
struct sta_info *sta;
unsigned long flags;
struct sk_buff *skb, *tmp;
@@ -362,6 +357,11 @@
netif_stop_queue(dev);
/*
+ * Purge work for this interface.
+ */
+ ieee80211_work_purge(sdata);
+
+ /*
* Now delete all active aggregation sessions.
*/
rcu_read_lock();
@@ -528,12 +528,9 @@
BSS_CHANGED_BEACON_ENABLED);
}
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->vif.addr;
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
- drv_remove_interface(local, &conf);
+ drv_remove_interface(local, &sdata->vif);
}
sdata->bss = NULL;
@@ -756,7 +753,7 @@
* and goes into the requested mode.
*/
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
return -EBUSY;
/* Purge and reset type-dependent state. */
@@ -917,6 +914,8 @@
wiphy_name(local->hw.wiphy));
#endif
+ drv_flush(local, false);
+
local->hw.conf.flags |= IEEE80211_CONF_IDLE;
return IEEE80211_CONF_CHANGE_IDLE;
}
@@ -926,16 +925,18 @@
struct ieee80211_sub_if_data *sdata;
int count = 0;
+ if (!list_empty(&local->work_list))
+ return ieee80211_idle_off(local, "working");
+
if (local->scanning)
return ieee80211_idle_off(local, "scanning");
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
/* do not count disabled managed interfaces */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- !sdata->u.mgd.associated &&
- list_empty(&sdata->u.mgd.work_list))
+ !sdata->u.mgd.associated)
continue;
/* do not count unused IBSS interfaces */
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 32ee6d0..8160d9c 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -443,7 +443,7 @@
add_todo(old_key, KEY_FLAG_TODO_DELETE);
add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
spin_unlock_irqrestore(&sdata->local->key_lock, flags);
@@ -509,7 +509,7 @@
{
ASSERT_RTNL();
- if (WARN_ON(!netif_running(sdata->dev)))
+ if (WARN_ON(!ieee80211_sdata_running(sdata)))
return;
ieee80211_todo_for_each_key(sdata, KEY_FLAG_TODO_HWACCEL_ADD);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index d442674..d0a14d9 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -107,6 +107,9 @@
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
+ } else if (local->tmp_channel) {
+ chan = scan_chan = local->tmp_channel;
+ channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
channel_type = local->oper_channel_type;
@@ -212,7 +215,7 @@
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
- if (local->quiescing || !netif_running(sdata->dev) ||
+ if (local->quiescing || !ieee80211_sdata_running(sdata) ||
test_bit(SCAN_SW_SCANNING, &local->scanning)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
@@ -359,9 +362,7 @@
WIPHY_FLAG_4ADDR_STATION;
wiphy->privid = mac80211_wiphy_privid;
- /* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
- wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
- sizeof(struct cfg80211_bss);
+ wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
local = wiphy_priv(wiphy);
@@ -395,6 +396,8 @@
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+ ieee80211_work_init(local);
+
INIT_WORK(&local->restart_work, ieee80211_restart_work);
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index e0bd85e..61080c5 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -645,7 +645,7 @@
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct sk_buff *skb;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
return;
if (local->scanning)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 2f9ed8b..72920ee 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -77,12 +77,6 @@
/* caller must tell cfg80211 about internal error */
RX_MGMT_CFG80211_ASSOC_ERROR,
-
- /* caller must call cfg80211_auth_timeout() & free work */
- RX_MGMT_CFG80211_AUTH_TO,
-
- /* caller must call cfg80211_assoc_timeout() & free work */
- RX_MGMT_CFG80211_ASSOC_TO,
};
/* utils */
@@ -125,27 +119,6 @@
return (1 << ecw) - 1;
}
-static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
- struct ieee80211_supported_band *sband,
- u32 *rates)
-{
- int i, j, count;
- *rates = 0;
- count = 0;
- for (i = 0; i < bss->supp_rates_len; i++) {
- int rate = (bss->supp_rates[i] & 0x7F) * 5;
-
- for (j = 0; j < sband->n_bitrates; j++)
- if (sband->bitrates[j].bitrate == rate) {
- *rates |= BIT(j);
- count++;
- break;
- }
- }
-
- return count;
-}
-
/*
* ieee80211_enable_ht should be called only after the operating band
* has been determined as ht configuration depends on the hw's
@@ -231,264 +204,6 @@
/* frame sending functions */
-static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
- struct sk_buff *skb;
- struct ieee80211_mgmt *mgmt;
- u8 *pos;
- const u8 *ies, *ht_ie;
- int i, len, count, rates_len, supp_rates_len;
- u16 capab;
- int wmm = 0;
- struct ieee80211_supported_band *sband;
- u32 rates = 0;
-
- skb = dev_alloc_skb(local->hw.extra_tx_headroom +
- sizeof(*mgmt) + 200 + wk->ie_len +
- wk->ssid_len);
- if (!skb) {
- printk(KERN_DEBUG "%s: failed to allocate buffer for assoc "
- "frame\n", sdata->name);
- return;
- }
- skb_reserve(skb, local->hw.extra_tx_headroom);
-
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- capab = ifmgd->capab;
-
- if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) {
- if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE))
- capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
- if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE))
- capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
- }
-
- if (wk->bss->cbss.capability & WLAN_CAPABILITY_PRIVACY)
- capab |= WLAN_CAPABILITY_PRIVACY;
- if (wk->bss->wmm_used)
- wmm = 1;
-
- /* get all rates supported by the device and the AP as
- * some APs don't like getting a superset of their rates
- * in the association request (e.g. D-Link DAP 1353 in
- * b-only mode) */
- rates_len = ieee80211_compatible_rates(wk->bss, sband, &rates);
-
- if ((wk->bss->cbss.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
- (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
- capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
-
- mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
- memset(mgmt, 0, 24);
- memcpy(mgmt->da, wk->bss->cbss.bssid, ETH_ALEN);
- memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
- memcpy(mgmt->bssid, wk->bss->cbss.bssid, ETH_ALEN);
-
- if (!is_zero_ether_addr(wk->prev_bssid)) {
- skb_put(skb, 10);
- mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
- IEEE80211_STYPE_REASSOC_REQ);
- mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
- mgmt->u.reassoc_req.listen_interval =
- cpu_to_le16(local->hw.conf.listen_interval);
- memcpy(mgmt->u.reassoc_req.current_ap, wk->prev_bssid,
- ETH_ALEN);
- } else {
- skb_put(skb, 4);
- mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
- IEEE80211_STYPE_ASSOC_REQ);
- mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
- mgmt->u.assoc_req.listen_interval =
- cpu_to_le16(local->hw.conf.listen_interval);
- }
-
- /* SSID */
- ies = pos = skb_put(skb, 2 + wk->ssid_len);
- *pos++ = WLAN_EID_SSID;
- *pos++ = wk->ssid_len;
- memcpy(pos, wk->ssid, wk->ssid_len);
-
- /* add all rates which were marked to be used above */
- supp_rates_len = rates_len;
- if (supp_rates_len > 8)
- supp_rates_len = 8;
-
- len = sband->n_bitrates;
- pos = skb_put(skb, supp_rates_len + 2);
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = supp_rates_len;
-
- count = 0;
- for (i = 0; i < sband->n_bitrates; i++) {
- if (BIT(i) & rates) {
- int rate = sband->bitrates[i].bitrate;
- *pos++ = (u8) (rate / 5);
- if (++count == 8)
- break;
- }
- }
-
- if (rates_len > count) {
- pos = skb_put(skb, rates_len - count + 2);
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = rates_len - count;
-
- for (i++; i < sband->n_bitrates; i++) {
- if (BIT(i) & rates) {
- int rate = sband->bitrates[i].bitrate;
- *pos++ = (u8) (rate / 5);
- }
- }
- }
-
- if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
- /* 1. power capabilities */
- pos = skb_put(skb, 4);
- *pos++ = WLAN_EID_PWR_CAPABILITY;
- *pos++ = 2;
- *pos++ = 0; /* min tx power */
- *pos++ = local->hw.conf.channel->max_power; /* max tx power */
-
- /* 2. supported channels */
- /* TODO: get this in reg domain format */
- pos = skb_put(skb, 2 * sband->n_channels + 2);
- *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
- *pos++ = 2 * sband->n_channels;
- for (i = 0; i < sband->n_channels; i++) {
- *pos++ = ieee80211_frequency_to_channel(
- sband->channels[i].center_freq);
- *pos++ = 1; /* one channel in the subband*/
- }
- }
-
- if (wk->ie_len && wk->ie) {
- pos = skb_put(skb, wk->ie_len);
- memcpy(pos, wk->ie, wk->ie_len);
- }
-
- if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED)) {
- pos = skb_put(skb, 9);
- *pos++ = WLAN_EID_VENDOR_SPECIFIC;
- *pos++ = 7; /* len */
- *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */
- *pos++ = 0x50;
- *pos++ = 0xf2;
- *pos++ = 2; /* WME */
- *pos++ = 0; /* WME info */
- *pos++ = 1; /* WME ver */
- *pos++ = 0;
- }
-
- /* wmm support is a must to HT */
- /*
- * IEEE802.11n does not allow TKIP/WEP as pairwise
- * ciphers in HT mode. We still associate in non-ht
- * mode (11a/b/g) if any one of these ciphers is
- * configured as pairwise.
- */
- if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
- sband->ht_cap.ht_supported &&
- (ht_ie = ieee80211_bss_get_ie(&wk->bss->cbss, WLAN_EID_HT_INFORMATION)) &&
- ht_ie[1] >= sizeof(struct ieee80211_ht_info) &&
- (!(ifmgd->flags & IEEE80211_STA_DISABLE_11N))) {
- struct ieee80211_ht_info *ht_info =
- (struct ieee80211_ht_info *)(ht_ie + 2);
- u16 cap = sband->ht_cap.cap;
- __le16 tmp;
- u32 flags = local->hw.conf.channel->flags;
-
- /* determine capability flags */
-
- if (ieee80211_disable_40mhz_24ghz &&
- sband->band == IEEE80211_BAND_2GHZ) {
- cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- cap &= ~IEEE80211_HT_CAP_SGI_40;
- }
-
- switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
- cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- cap &= ~IEEE80211_HT_CAP_SGI_40;
- }
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
- cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- cap &= ~IEEE80211_HT_CAP_SGI_40;
- }
- break;
- }
-
- /* set SM PS mode properly */
- cap &= ~IEEE80211_HT_CAP_SM_PS;
- /* new association always uses requested smps mode */
- if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
- if (ifmgd->powersave)
- ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
- else
- ifmgd->ap_smps = IEEE80211_SMPS_OFF;
- } else
- ifmgd->ap_smps = ifmgd->req_smps;
-
- switch (ifmgd->ap_smps) {
- case IEEE80211_SMPS_AUTOMATIC:
- case IEEE80211_SMPS_NUM_MODES:
- WARN_ON(1);
- case IEEE80211_SMPS_OFF:
- cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
- IEEE80211_HT_CAP_SM_PS_SHIFT;
- break;
- case IEEE80211_SMPS_STATIC:
- cap |= WLAN_HT_CAP_SM_PS_STATIC <<
- IEEE80211_HT_CAP_SM_PS_SHIFT;
- break;
- case IEEE80211_SMPS_DYNAMIC:
- cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
- IEEE80211_HT_CAP_SM_PS_SHIFT;
- break;
- }
-
- /* reserve and fill IE */
-
- pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
- *pos++ = WLAN_EID_HT_CAPABILITY;
- *pos++ = sizeof(struct ieee80211_ht_cap);
- memset(pos, 0, sizeof(struct ieee80211_ht_cap));
-
- /* capability flags */
- tmp = cpu_to_le16(cap);
- memcpy(pos, &tmp, sizeof(u16));
- pos += sizeof(u16);
-
- /* AMPDU parameters */
- *pos++ = sband->ht_cap.ampdu_factor |
- (sband->ht_cap.ampdu_density <<
- IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
-
- /* MCS set */
- memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
- pos += sizeof(sband->ht_cap.mcs);
-
- /* extended capabilities */
- pos += sizeof(__le16);
-
- /* BF capabilities */
- pos += sizeof(__le32);
-
- /* antenna selection */
- pos += sizeof(u8);
- }
-
- IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
- ieee80211_tx_skb(sdata, skb);
-}
-
-
static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
const u8 *bssid, u16 stype, u16 reason,
void *cookie)
@@ -604,7 +319,7 @@
container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
return;
mutex_lock(&ifmgd->mtx);
@@ -615,7 +330,7 @@
ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL);
/* XXX: shouldn't really modify cfg80211-owned data! */
- ifmgd->associated->cbss.channel = sdata->local->oper_channel;
+ ifmgd->associated->channel = sdata->local->oper_channel;
ieee80211_wake_queues_by_reason(&sdata->local->hw,
IEEE80211_QUEUE_STOP_REASON_CSA);
@@ -642,6 +357,8 @@
struct ieee80211_channel_sw_ie *sw_elem,
struct ieee80211_bss *bss)
{
+ struct cfg80211_bss *cbss =
+ container_of((void *)bss, struct cfg80211_bss, priv);
struct ieee80211_channel *new_ch;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
@@ -675,7 +392,7 @@
mod_timer(&ifmgd->chswitch_timer,
jiffies +
msecs_to_jiffies(sw_elem->count *
- bss->cbss.beacon_interval));
+ cbss->beacon_interval));
}
}
@@ -749,8 +466,13 @@
return;
}
+ if (!list_empty(&local->work_list)) {
+ local->ps_sdata = NULL;
+ goto change;
+ }
+
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type != NL80211_IFTYPE_STATION)
continue;
@@ -759,7 +481,7 @@
}
if (count == 1 && found->u.mgd.powersave &&
- found->u.mgd.associated && list_empty(&found->u.mgd.work_list) &&
+ found->u.mgd.associated &&
!(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
IEEE80211_STA_CONNECTION_POLL))) {
s32 beaconint_us;
@@ -787,6 +509,7 @@
local->ps_sdata = NULL;
}
+ change:
ieee80211_change_ps(local);
}
@@ -846,7 +569,7 @@
int count;
u8 *pos;
- if (!(ifmgd->flags & IEEE80211_STA_WMM_ENABLED))
+ if (local->hw.queues < 4)
return;
if (!wmm_param)
@@ -949,25 +672,24 @@
}
static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
+ struct cfg80211_bss *cbss,
u32 bss_info_changed)
{
+ struct ieee80211_bss *bss = (void *)cbss->priv;
struct ieee80211_local *local = sdata->local;
- struct ieee80211_bss *bss = wk->bss;
bss_info_changed |= BSS_CHANGED_ASSOC;
/* set timing information */
- sdata->vif.bss_conf.beacon_int = bss->cbss.beacon_interval;
- sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
+ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
+ sdata->vif.bss_conf.timestamp = cbss->tsf;
sdata->vif.bss_conf.dtim_period = bss->dtim_period;
bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
- bss->cbss.capability, bss->has_erp_value, bss->erp_value);
+ cbss->capability, bss->has_erp_value, bss->erp_value);
- sdata->u.mgd.associated = bss;
- sdata->u.mgd.old_associate_work = wk;
- memcpy(sdata->u.mgd.bssid, bss->cbss.bssid, ETH_ALEN);
+ sdata->u.mgd.associated = cbss;
+ memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
/* just to be sure */
sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
@@ -1005,93 +727,7 @@
netif_carrier_on(sdata->dev);
}
-static enum rx_mgmt_action __must_check
-ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
-
- wk->tries++;
- if (wk->tries > IEEE80211_AUTH_MAX_TRIES) {
- printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n",
- sdata->name, wk->bss->cbss.bssid);
-
- /*
- * Most likely AP is not in the range so remove the
- * bss struct for that AP.
- */
- cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
-
- /*
- * We might have a pending scan which had no chance to run yet
- * due to work needing to be done. Hence, queue the STAs work
- * again for that.
- */
- ieee80211_queue_work(&local->hw, &ifmgd->work);
- return RX_MGMT_CFG80211_AUTH_TO;
- }
-
- printk(KERN_DEBUG "%s: direct probe to AP %pM (try %d)\n",
- sdata->name, wk->bss->cbss.bssid,
- wk->tries);
-
- /*
- * Direct probe is sent to broadcast address as some APs
- * will not answer to direct packet in unassociated state.
- */
- ieee80211_send_probe_req(sdata, NULL, wk->ssid, wk->ssid_len, NULL, 0);
-
- wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- run_again(ifmgd, wk->timeout);
-
- return RX_MGMT_NONE;
-}
-
-
-static enum rx_mgmt_action __must_check
-ieee80211_authenticate(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
-
- wk->tries++;
- if (wk->tries > IEEE80211_AUTH_MAX_TRIES) {
- printk(KERN_DEBUG "%s: authentication with AP %pM"
- " timed out\n",
- sdata->name, wk->bss->cbss.bssid);
-
- /*
- * Most likely AP is not in the range so remove the
- * bss struct for that AP.
- */
- cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
-
- /*
- * We might have a pending scan which had no chance to run yet
- * due to work needing to be done. Hence, queue the STAs work
- * again for that.
- */
- ieee80211_queue_work(&local->hw, &ifmgd->work);
- return RX_MGMT_CFG80211_AUTH_TO;
- }
-
- printk(KERN_DEBUG "%s: authenticate with AP %pM (try %d)\n",
- sdata->name, wk->bss->cbss.bssid, wk->tries);
-
- ieee80211_send_auth(sdata, 1, wk->auth_alg, wk->ie, wk->ie_len,
- wk->bss->cbss.bssid, NULL, 0, 0);
- wk->auth_transaction = 2;
-
- wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- run_again(ifmgd, wk->timeout);
-
- return RX_MGMT_NONE;
-}
-
-static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
- bool deauth)
+static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
@@ -1104,21 +740,11 @@
if (WARN_ON(!ifmgd->associated))
return;
- memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+ memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
ifmgd->associated = NULL;
memset(ifmgd->bssid, 0, ETH_ALEN);
- if (deauth) {
- kfree(ifmgd->old_associate_work);
- ifmgd->old_associate_work = NULL;
- } else {
- struct ieee80211_mgd_work *wk = ifmgd->old_associate_work;
-
- wk->state = IEEE80211_MGD_STATE_IDLE;
- list_add(&wk->list, &ifmgd->work_list);
- }
-
/*
* we need to commit the associated = NULL change because the
* scan code uses that to determine whether this iface should
@@ -1187,44 +813,6 @@
sta_info_destroy(sta);
}
-static enum rx_mgmt_action __must_check
-ieee80211_associate(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
-
- wk->tries++;
- if (wk->tries > IEEE80211_ASSOC_MAX_TRIES) {
- printk(KERN_DEBUG "%s: association with AP %pM"
- " timed out\n",
- sdata->name, wk->bss->cbss.bssid);
-
- /*
- * Most likely AP is not in the range so remove the
- * bss struct for that AP.
- */
- cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
-
- /*
- * We might have a pending scan which had no chance to run yet
- * due to work needing to be done. Hence, queue the STAs work
- * again for that.
- */
- ieee80211_queue_work(&local->hw, &ifmgd->work);
- return RX_MGMT_CFG80211_ASSOC_TO;
- }
-
- printk(KERN_DEBUG "%s: associate with AP %pM (try %d)\n",
- sdata->name, wk->bss->cbss.bssid, wk->tries);
- ieee80211_send_assoc(sdata, wk);
-
- wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
- run_again(ifmgd, wk->timeout);
-
- return RX_MGMT_NONE;
-}
-
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr *hdr)
{
@@ -1248,8 +836,8 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
const u8 *ssid;
- ssid = ieee80211_bss_get_ie(&ifmgd->associated->cbss, WLAN_EID_SSID);
- ieee80211_send_probe_req(sdata, ifmgd->associated->cbss.bssid,
+ ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+ ieee80211_send_probe_req(sdata, ifmgd->associated->bssid,
ssid + 2, ssid[1], NULL, 0);
ifmgd->probe_send_count++;
@@ -1263,12 +851,15 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
bool already = false;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
return;
if (sdata->local->scanning)
return;
+ if (sdata->local->tmp_channel)
+ return;
+
mutex_lock(&ifmgd->mtx);
if (!ifmgd->associated)
@@ -1330,88 +921,8 @@
}
EXPORT_SYMBOL(ieee80211_beacon_loss);
-static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk)
-{
- wk->state = IEEE80211_MGD_STATE_IDLE;
- printk(KERN_DEBUG "%s: authenticated\n", sdata->name);
-}
-
-
-static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
- struct ieee80211_mgmt *mgmt,
- size_t len)
-{
- u8 *pos;
- struct ieee802_11_elems elems;
-
- pos = mgmt->u.auth.variable;
- ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
- if (!elems.challenge)
- return;
- ieee80211_send_auth(sdata, 3, wk->auth_alg,
- elems.challenge - 2, elems.challenge_len + 2,
- wk->bss->cbss.bssid,
- wk->key, wk->key_len, wk->key_idx);
- wk->auth_transaction = 4;
-}
-
-static enum rx_mgmt_action __must_check
-ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
- struct ieee80211_mgmt *mgmt, size_t len)
-{
- u16 auth_alg, auth_transaction, status_code;
-
- if (wk->state != IEEE80211_MGD_STATE_AUTH)
- return RX_MGMT_NONE;
-
- if (len < 24 + 6)
- return RX_MGMT_NONE;
-
- if (memcmp(wk->bss->cbss.bssid, mgmt->sa, ETH_ALEN) != 0)
- return RX_MGMT_NONE;
-
- if (memcmp(wk->bss->cbss.bssid, mgmt->bssid, ETH_ALEN) != 0)
- return RX_MGMT_NONE;
-
- auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
- auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
- status_code = le16_to_cpu(mgmt->u.auth.status_code);
-
- if (auth_alg != wk->auth_alg ||
- auth_transaction != wk->auth_transaction)
- return RX_MGMT_NONE;
-
- if (status_code != WLAN_STATUS_SUCCESS) {
- list_del(&wk->list);
- kfree(wk);
- return RX_MGMT_CFG80211_AUTH;
- }
-
- switch (wk->auth_alg) {
- case WLAN_AUTH_OPEN:
- case WLAN_AUTH_LEAP:
- case WLAN_AUTH_FT:
- ieee80211_auth_completed(sdata, wk);
- return RX_MGMT_CFG80211_AUTH;
- case WLAN_AUTH_SHARED_KEY:
- if (wk->auth_transaction == 4) {
- ieee80211_auth_completed(sdata, wk);
- return RX_MGMT_CFG80211_AUTH;
- } else
- ieee80211_auth_challenge(sdata, wk, mgmt, len);
- break;
- }
-
- return RX_MGMT_NONE;
-}
-
-
static enum rx_mgmt_action __must_check
ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1423,23 +934,15 @@
ASSERT_MGD_MTX(ifmgd);
- if (wk)
- bssid = wk->bss->cbss.bssid;
- else
- bssid = ifmgd->associated->cbss.bssid;
+ bssid = ifmgd->associated->bssid;
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n",
sdata->name, bssid, reason_code);
- if (!wk) {
- ieee80211_set_disassoc(sdata, true);
- ieee80211_recalc_idle(sdata->local);
- } else {
- list_del(&wk->list);
- kfree(wk);
- }
+ ieee80211_set_disassoc(sdata);
+ ieee80211_recalc_idle(sdata->local);
return RX_MGMT_CFG80211_DEAUTH;
}
@@ -1460,7 +963,7 @@
if (WARN_ON(!ifmgd->associated))
return RX_MGMT_NONE;
- if (WARN_ON(memcmp(ifmgd->associated->cbss.bssid, mgmt->sa, ETH_ALEN)))
+ if (WARN_ON(memcmp(ifmgd->associated->bssid, mgmt->sa, ETH_ALEN)))
return RX_MGMT_NONE;
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
@@ -1468,96 +971,57 @@
printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
sdata->name, mgmt->sa, reason_code);
- ieee80211_set_disassoc(sdata, false);
+ ieee80211_set_disassoc(sdata);
ieee80211_recalc_idle(sdata->local);
return RX_MGMT_CFG80211_DISASSOC;
}
-static enum rx_mgmt_action __must_check
-ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
- struct ieee80211_mgmt *mgmt, size_t len,
- bool reassoc)
+static bool ieee80211_assoc_success(struct ieee80211_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len)
{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct sta_info *sta;
+ struct cfg80211_bss *cbss = wk->assoc.bss;
+ u8 *pos;
u32 rates, basic_rates;
- u16 capab_info, status_code, aid;
+ u16 capab_info, aid;
struct ieee802_11_elems elems;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
- u8 *pos;
u32 changed = 0;
int i, j, err;
bool have_higher_than_11mbit = false;
u16 ap_ht_cap_flags;
- /*
- * AssocResp and ReassocResp have identical structure, so process both
- * of them in this function.
- */
+ /* AssocResp and ReassocResp have identical structure */
- if (len < 24 + 6)
- return RX_MGMT_NONE;
-
- if (memcmp(wk->bss->cbss.bssid, mgmt->sa, ETH_ALEN) != 0)
- return RX_MGMT_NONE;
-
- capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
- status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
-
- printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x "
- "status=%d aid=%d)\n",
- sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
- capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
-
- pos = mgmt->u.assoc_resp.variable;
- ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
-
- if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
- elems.timeout_int && elems.timeout_int_len == 5 &&
- elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) {
- u32 tu, ms;
- tu = get_unaligned_le32(elems.timeout_int + 1);
- ms = tu * 1024 / 1000;
- printk(KERN_DEBUG "%s: AP rejected association temporarily; "
- "comeback duration %u TU (%u ms)\n",
- sdata->name, tu, ms);
- wk->timeout = jiffies + msecs_to_jiffies(ms);
- if (ms > IEEE80211_ASSOC_TIMEOUT)
- run_again(ifmgd, jiffies + msecs_to_jiffies(ms));
- return RX_MGMT_NONE;
- }
-
- if (status_code != WLAN_STATUS_SUCCESS) {
- printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
- sdata->name, status_code);
- wk->state = IEEE80211_MGD_STATE_IDLE;
- return RX_MGMT_CFG80211_ASSOC;
- }
+ capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not "
"set\n", sdata->name, aid);
aid &= ~(BIT(15) | BIT(14));
+ pos = mgmt->u.assoc_resp.variable;
+ ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
+
if (!elems.supp_rates) {
printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
sdata->name);
- return RX_MGMT_NONE;
+ return false;
}
- printk(KERN_DEBUG "%s: associated\n", sdata->name);
ifmgd->aid = aid;
- sta = sta_info_alloc(sdata, wk->bss->cbss.bssid, GFP_KERNEL);
+ sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
if (!sta) {
printk(KERN_DEBUG "%s: failed to alloc STA entry for"
" the AP\n", sdata->name);
- return RX_MGMT_CFG80211_ASSOC_ERROR;
+ return false;
}
set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC |
@@ -1641,22 +1105,19 @@
else
ieee80211_set_wmm_default(sdata);
+ local->oper_channel = wk->chan;
+
if (elems.ht_info_elem && elems.wmm_param &&
- (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
+ (sdata->local->hw.queues >= 4) &&
!(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
- wk->bss->cbss.bssid,
- ap_ht_cap_flags);
-
- /* delete work item -- must be before set_associated for PS */
- list_del(&wk->list);
+ cbss->bssid, ap_ht_cap_flags);
/* set AID and assoc capability,
* ieee80211_set_associated() will tell the driver */
bss_conf->aid = aid;
bss_conf->assoc_capability = capab_info;
- /* this will take ownership of wk */
- ieee80211_set_associated(sdata, wk, changed);
+ ieee80211_set_associated(sdata, cbss, changed);
/*
* Start timer to probe the connection to the AP now.
@@ -1665,7 +1126,7 @@
ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
mod_beacon_timer(sdata);
- return RX_MGMT_CFG80211_ASSOC;
+ return true;
}
@@ -1700,7 +1161,7 @@
return;
if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) &&
- (memcmp(mgmt->bssid, sdata->u.mgd.associated->cbss.bssid,
+ (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid,
ETH_ALEN) == 0)) {
struct ieee80211_channel_sw_ie *sw_elem =
(struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
@@ -1710,12 +1171,12 @@
static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgd_work *wk,
- struct ieee80211_mgmt *mgmt, size_t len,
- struct ieee80211_rx_status *rx_status)
+ struct sk_buff *skb)
{
+ struct ieee80211_mgmt *mgmt = (void *)skb->data;
struct ieee80211_if_managed *ifmgd;
- size_t baselen;
+ struct ieee80211_rx_status *rx_status = (void *) skb->cb;
+ size_t baselen, len = skb->len;
struct ieee802_11_elems elems;
ifmgd = &sdata->u.mgd;
@@ -1734,17 +1195,8 @@
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
- /* direct probe may be part of the association flow */
- if (wk && wk->state == IEEE80211_MGD_STATE_PROBE) {
- printk(KERN_DEBUG "%s: direct probe responded\n",
- sdata->name);
- wk->tries = 0;
- wk->state = IEEE80211_MGD_STATE_AUTH;
- WARN_ON(ieee80211_authenticate(sdata, wk) != RX_MGMT_NONE);
- }
-
if (ifmgd->associated &&
- memcmp(mgmt->bssid, ifmgd->associated->cbss.bssid, ETH_ALEN) == 0 &&
+ memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0 &&
ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
IEEE80211_STA_CONNECTION_POLL)) {
ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
@@ -1817,7 +1269,7 @@
if (!ifmgd->associated)
return;
- bssid = ifmgd->associated->cbss.bssid;
+ bssid = ifmgd->associated->bssid;
/*
* And in theory even frames from a different AP we were just
@@ -1956,9 +1408,6 @@
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
- case IEEE80211_STYPE_AUTH:
- case IEEE80211_STYPE_ASSOC_RESP:
- case IEEE80211_STYPE_REASSOC_RESP:
case IEEE80211_STYPE_DEAUTH:
case IEEE80211_STYPE_DISASSOC:
case IEEE80211_STYPE_ACTION:
@@ -1976,7 +1425,6 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_rx_status *rx_status;
struct ieee80211_mgmt *mgmt;
- struct ieee80211_mgd_work *wk;
enum rx_mgmt_action rma = RX_MGMT_NONE;
u16 fc;
@@ -1987,20 +1435,17 @@
mutex_lock(&ifmgd->mtx);
if (ifmgd->associated &&
- memcmp(ifmgd->associated->cbss.bssid, mgmt->bssid,
- ETH_ALEN) == 0) {
+ memcmp(ifmgd->associated->bssid, mgmt->bssid, ETH_ALEN) == 0) {
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_BEACON:
ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
rx_status);
break;
case IEEE80211_STYPE_PROBE_RESP:
- ieee80211_rx_mgmt_probe_resp(sdata, NULL, mgmt,
- skb->len, rx_status);
+ ieee80211_rx_mgmt_probe_resp(sdata, skb);
break;
case IEEE80211_STYPE_DEAUTH:
- rma = ieee80211_rx_mgmt_deauth(sdata, NULL,
- mgmt, skb->len);
+ rma = ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_DISASSOC:
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
@@ -2009,7 +1454,7 @@
/* XXX: differentiate, can only happen for CSA now! */
ieee80211_sta_process_chanswitch(sdata,
&mgmt->u.action.u.chan_switch.sw_elem,
- ifmgd->associated);
+ (void *)ifmgd->associated->priv);
break;
}
mutex_unlock(&ifmgd->mtx);
@@ -2030,62 +1475,11 @@
goto out;
}
- list_for_each_entry(wk, &ifmgd->work_list, list) {
- if (memcmp(wk->bss->cbss.bssid, mgmt->bssid, ETH_ALEN) != 0)
- continue;
-
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_PROBE_RESP:
- ieee80211_rx_mgmt_probe_resp(sdata, wk, mgmt, skb->len,
- rx_status);
- break;
- case IEEE80211_STYPE_AUTH:
- rma = ieee80211_rx_mgmt_auth(sdata, wk, mgmt, skb->len);
- break;
- case IEEE80211_STYPE_ASSOC_RESP:
- rma = ieee80211_rx_mgmt_assoc_resp(sdata, wk, mgmt,
- skb->len, false);
- break;
- case IEEE80211_STYPE_REASSOC_RESP:
- rma = ieee80211_rx_mgmt_assoc_resp(sdata, wk, mgmt,
- skb->len, true);
- break;
- case IEEE80211_STYPE_DEAUTH:
- rma = ieee80211_rx_mgmt_deauth(sdata, wk, mgmt,
- skb->len);
- break;
- }
- /*
- * We've processed this frame for that work, so it can't
- * belong to another work struct.
- * NB: this is also required for correctness because the
- * called functions can free 'wk', and for 'rma'!
- */
- break;
- }
-
mutex_unlock(&ifmgd->mtx);
- switch (rma) {
- case RX_MGMT_NONE:
- /* no action */
- break;
- case RX_MGMT_CFG80211_AUTH:
- cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, skb->len);
- break;
- case RX_MGMT_CFG80211_ASSOC:
- cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, skb->len);
- break;
- case RX_MGMT_CFG80211_DEAUTH:
+ if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
+ (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
- break;
- case RX_MGMT_CFG80211_ASSOC_ERROR:
- /* an internal error -- pretend timeout for now */
- cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid);
- break;
- default:
- WARN(1, "unexpected: %d", rma);
- }
out:
kfree_skb(skb);
@@ -2113,12 +1507,8 @@
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd;
struct sk_buff *skb;
- struct ieee80211_mgd_work *wk, *tmp;
- LIST_HEAD(free_work);
- enum rx_mgmt_action rma;
- bool anybusy = false;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
return;
if (local->scanning)
@@ -2149,7 +1539,7 @@
ifmgd->associated) {
u8 bssid[ETH_ALEN];
- memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+ memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
if (time_is_after_jiffies(ifmgd->probe_timeout))
run_again(ifmgd, ifmgd->probe_timeout);
@@ -2171,7 +1561,7 @@
printk(KERN_DEBUG "No probe response from AP %pM"
" after %dms, disconnecting.\n",
bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
- ieee80211_set_disassoc(sdata, true);
+ ieee80211_set_disassoc(sdata);
ieee80211_recalc_idle(local);
mutex_unlock(&ifmgd->mtx);
/*
@@ -2186,87 +1576,7 @@
}
}
-
- ieee80211_recalc_idle(local);
-
- list_for_each_entry_safe(wk, tmp, &ifmgd->work_list, list) {
- if (time_is_after_jiffies(wk->timeout)) {
- /*
- * This work item isn't supposed to be worked on
- * right now, but take care to adjust the timer
- * properly.
- */
- run_again(ifmgd, wk->timeout);
- continue;
- }
-
- switch (wk->state) {
- default:
- WARN_ON(1);
- /* fall through */
- case IEEE80211_MGD_STATE_IDLE:
- /* nothing */
- rma = RX_MGMT_NONE;
- break;
- case IEEE80211_MGD_STATE_PROBE:
- rma = ieee80211_direct_probe(sdata, wk);
- break;
- case IEEE80211_MGD_STATE_AUTH:
- rma = ieee80211_authenticate(sdata, wk);
- break;
- case IEEE80211_MGD_STATE_ASSOC:
- rma = ieee80211_associate(sdata, wk);
- break;
- }
-
- switch (rma) {
- case RX_MGMT_NONE:
- /* no action required */
- break;
- case RX_MGMT_CFG80211_AUTH_TO:
- case RX_MGMT_CFG80211_ASSOC_TO:
- list_del(&wk->list);
- list_add(&wk->list, &free_work);
- wk->tries = rma; /* small abuse but only local */
- break;
- default:
- WARN(1, "unexpected: %d", rma);
- }
- }
-
- list_for_each_entry(wk, &ifmgd->work_list, list) {
- if (wk->state != IEEE80211_MGD_STATE_IDLE) {
- anybusy = true;
- break;
- }
- }
- if (!anybusy &&
- test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request))
- ieee80211_queue_delayed_work(&local->hw,
- &local->scan_work,
- round_jiffies_relative(0));
-
mutex_unlock(&ifmgd->mtx);
-
- list_for_each_entry_safe(wk, tmp, &free_work, list) {
- switch (wk->tries) {
- case RX_MGMT_CFG80211_AUTH_TO:
- cfg80211_send_auth_timeout(sdata->dev,
- wk->bss->cbss.bssid);
- break;
- case RX_MGMT_CFG80211_ASSOC_TO:
- cfg80211_send_assoc_timeout(sdata->dev,
- wk->bss->cbss.bssid);
- break;
- default:
- WARN(1, "unexpected: %d", wk->tries);
- }
-
- list_del(&wk->list);
- kfree(wk);
- }
-
- ieee80211_recalc_idle(local);
}
static void ieee80211_sta_bcn_mon_timer(unsigned long data)
@@ -2375,12 +1685,7 @@
(unsigned long) sdata);
skb_queue_head_init(&ifmgd->skb_queue);
- INIT_LIST_HEAD(&ifmgd->work_list);
-
- ifmgd->capab = WLAN_CAPABILITY_ESS;
ifmgd->flags = 0;
- if (sdata->local->hw.queues >= 4)
- ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
mutex_init(&ifmgd->mtx);
@@ -2418,12 +1723,34 @@
}
/* config hooks */
+static enum work_done_result
+ieee80211_probe_auth_done(struct ieee80211_work *wk,
+ struct sk_buff *skb)
+{
+ if (!skb) {
+ cfg80211_send_auth_timeout(wk->sdata->dev, wk->filter_ta);
+ return WORK_DONE_DESTROY;
+ }
+
+ if (wk->type == IEEE80211_WORK_AUTH) {
+ cfg80211_send_rx_auth(wk->sdata->dev, skb->data, skb->len);
+ return WORK_DONE_DESTROY;
+ }
+
+ mutex_lock(&wk->sdata->u.mgd.mtx);
+ ieee80211_rx_mgmt_probe_resp(wk->sdata, skb);
+ mutex_unlock(&wk->sdata->u.mgd.mtx);
+
+ wk->type = IEEE80211_WORK_AUTH;
+ wk->probe_auth.tries = 0;
+ return WORK_DONE_REQUEUE;
+}
+
int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
struct cfg80211_auth_request *req)
{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
const u8 *ssid;
- struct ieee80211_mgd_work *wk;
+ struct ieee80211_work *wk;
u16 auth_alg;
switch (req->auth_type) {
@@ -2447,7 +1774,7 @@
if (!wk)
return -ENOMEM;
- wk->bss = (void *)req->bss;
+ memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);;
if (req->ie && req->ie_len) {
memcpy(wk->ie, req->ie, req->ie_len);
@@ -2455,66 +1782,76 @@
}
if (req->key && req->key_len) {
- wk->key_len = req->key_len;
- wk->key_idx = req->key_idx;
- memcpy(wk->key, req->key, req->key_len);
+ wk->probe_auth.key_len = req->key_len;
+ wk->probe_auth.key_idx = req->key_idx;
+ memcpy(wk->probe_auth.key, req->key, req->key_len);
}
ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
- memcpy(wk->ssid, ssid + 2, ssid[1]);
- wk->ssid_len = ssid[1];
+ memcpy(wk->probe_auth.ssid, ssid + 2, ssid[1]);
+ wk->probe_auth.ssid_len = ssid[1];
- wk->state = IEEE80211_MGD_STATE_PROBE;
- wk->auth_alg = auth_alg;
- wk->timeout = jiffies; /* run right away */
+ wk->probe_auth.algorithm = auth_alg;
+ wk->probe_auth.privacy = req->bss->capability & WLAN_CAPABILITY_PRIVACY;
- /*
- * XXX: if still associated need to tell AP that we're going
- * to sleep and then change channel etc.
- */
- sdata->local->oper_channel = req->bss->channel;
- ieee80211_hw_config(sdata->local, 0);
+ wk->type = IEEE80211_WORK_DIRECT_PROBE;
+ wk->chan = req->bss->channel;
+ wk->sdata = sdata;
+ wk->done = ieee80211_probe_auth_done;
- mutex_lock(&ifmgd->mtx);
- list_add(&wk->list, &sdata->u.mgd.work_list);
- mutex_unlock(&ifmgd->mtx);
-
- ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.work);
+ ieee80211_add_work(wk);
return 0;
}
+static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
+ struct sk_buff *skb)
+{
+ struct ieee80211_mgmt *mgmt;
+ u16 status;
+
+ if (!skb) {
+ cfg80211_send_assoc_timeout(wk->sdata->dev, wk->filter_ta);
+ return WORK_DONE_DESTROY;
+ }
+
+ mgmt = (void *)skb->data;
+ status = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+
+ if (status == WLAN_STATUS_SUCCESS) {
+ mutex_lock(&wk->sdata->u.mgd.mtx);
+ if (!ieee80211_assoc_success(wk, mgmt, skb->len)) {
+ mutex_unlock(&wk->sdata->u.mgd.mtx);
+ /* oops -- internal error -- send timeout for now */
+ cfg80211_send_assoc_timeout(wk->sdata->dev,
+ wk->filter_ta);
+ return WORK_DONE_DESTROY;
+ }
+ mutex_unlock(&wk->sdata->u.mgd.mtx);
+ }
+
+ cfg80211_send_rx_assoc(wk->sdata->dev, skb->data, skb->len);
+ return WORK_DONE_DESTROY;
+}
+
int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
struct cfg80211_assoc_request *req)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_mgd_work *wk, *found = NULL;
- int i, err;
+ struct ieee80211_bss *bss = (void *)req->bss->priv;
+ struct ieee80211_work *wk;
+ const u8 *ssid;
+ int i;
mutex_lock(&ifmgd->mtx);
-
- list_for_each_entry(wk, &ifmgd->work_list, list) {
- if (&wk->bss->cbss == req->bss &&
- wk->state == IEEE80211_MGD_STATE_IDLE) {
- found = wk;
- break;
- }
+ if (ifmgd->associated) {
+ mutex_unlock(&ifmgd->mtx);
+ return -EALREADY;
}
+ mutex_unlock(&ifmgd->mtx);
- if (!found) {
- err = -ENOLINK;
- goto out;
- }
-
- list_del(&found->list);
-
- wk = krealloc(found, sizeof(*wk) + req->ie_len, GFP_KERNEL);
- if (!wk) {
- list_add(&found->list, &ifmgd->work_list);
- err = -ENOMEM;
- goto out;
- }
-
- list_add(&wk->list, &ifmgd->work_list);
+ wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
+ if (!wk)
+ return -ENOMEM;
ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N;
@@ -2524,8 +1861,6 @@
req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104)
ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
- sdata->local->oper_channel = req->bss->channel;
- ieee80211_hw_config(sdata->local, 0);
if (req->ie && req->ie_len) {
memcpy(wk->ie, req->ie, req->ie_len);
@@ -2533,12 +1868,46 @@
} else
wk->ie_len = 0;
- if (req->prev_bssid)
- memcpy(wk->prev_bssid, req->prev_bssid, ETH_ALEN);
+ wk->assoc.bss = req->bss;
- wk->state = IEEE80211_MGD_STATE_ASSOC;
- wk->tries = 0;
- wk->timeout = jiffies; /* run right away */
+ memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);
+
+ /* new association always uses requested smps mode */
+ if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
+ if (ifmgd->powersave)
+ ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
+ else
+ ifmgd->ap_smps = IEEE80211_SMPS_OFF;
+ } else
+ ifmgd->ap_smps = ifmgd->req_smps;
+
+ wk->assoc.smps = ifmgd->ap_smps;
+ /*
+ * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
+ * We still associate in non-HT mode (11a/b/g) if any one of these
+ * ciphers is configured as pairwise.
+ * We can set this to true for non-11n hardware, that'll be checked
+ * separately along with the peer capabilities.
+ */
+ wk->assoc.use_11n = !(ifmgd->flags & IEEE80211_STA_DISABLE_11N);
+ wk->assoc.capability = req->bss->capability;
+ wk->assoc.wmm_used = bss->wmm_used;
+ wk->assoc.supp_rates = bss->supp_rates;
+ wk->assoc.supp_rates_len = bss->supp_rates_len;
+ wk->assoc.ht_information_ie =
+ ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_INFORMATION);
+
+ ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
+ memcpy(wk->assoc.ssid, ssid + 2, ssid[1]);
+ wk->assoc.ssid_len = ssid[1];
+
+ if (req->prev_bssid)
+ memcpy(wk->assoc.prev_bssid, req->prev_bssid, ETH_ALEN);
+
+ wk->type = IEEE80211_WORK_ASSOC;
+ wk->chan = req->bss->channel;
+ wk->sdata = sdata;
+ wk->done = ieee80211_assoc_done;
if (req->use_mfp) {
ifmgd->mfp = IEEE80211_MFP_REQUIRED;
@@ -2553,67 +1922,57 @@
else
ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
- ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.work);
-
- err = 0;
-
- out:
- mutex_unlock(&ifmgd->mtx);
- return err;
+ ieee80211_add_work(wk);
+ return 0;
}
int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
struct cfg80211_deauth_request *req,
void *cookie)
{
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_mgd_work *wk;
- const u8 *bssid = NULL;
- bool not_auth_yet = false;
+ struct ieee80211_work *wk;
+ const u8 *bssid = req->bss->bssid;
mutex_lock(&ifmgd->mtx);
- if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) {
+ if (ifmgd->associated == req->bss) {
bssid = req->bss->bssid;
- ieee80211_set_disassoc(sdata, true);
- } else list_for_each_entry(wk, &ifmgd->work_list, list) {
- if (&wk->bss->cbss == req->bss) {
- bssid = req->bss->bssid;
- if (wk->state == IEEE80211_MGD_STATE_PROBE)
- not_auth_yet = true;
+ ieee80211_set_disassoc(sdata);
+ mutex_unlock(&ifmgd->mtx);
+ } else {
+ bool not_auth_yet = false;
+
+ mutex_unlock(&ifmgd->mtx);
+
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (wk->type != IEEE80211_WORK_DIRECT_PROBE)
+ continue;
+ if (memcmp(req->bss->bssid, wk->filter_ta, ETH_ALEN))
+ continue;
+ not_auth_yet = true;
list_del(&wk->list);
- kfree(wk);
+ free_work(wk);
break;
}
- }
+ mutex_unlock(&local->work_mtx);
- /*
- * If somebody requests authentication and we haven't
- * sent out an auth frame yet there's no need to send
- * out a deauth frame either. If the state was PROBE,
- * then this is the case. If it's AUTH we have sent a
- * frame, and if it's IDLE we have completed the auth
- * process already.
- */
- if (not_auth_yet) {
- mutex_unlock(&ifmgd->mtx);
- __cfg80211_auth_canceled(sdata->dev, bssid);
- return 0;
+ /*
+ * If somebody requests authentication and we haven't
+ * sent out an auth frame yet there's no need to send
+ * out a deauth frame either. If the state was PROBE,
+ * then this is the case. If it's AUTH we have sent a
+ * frame, and if it's IDLE we have completed the auth
+ * process already.
+ */
+ if (not_auth_yet) {
+ __cfg80211_auth_canceled(sdata->dev, bssid);
+ return 0;
+ }
}
- /*
- * cfg80211 should catch this ... but it's racy since
- * we can receive a deauth frame, process it, hand it
- * to cfg80211 while that's in a locked section already
- * trying to tell us that the user wants to disconnect.
- */
- if (!bssid) {
- mutex_unlock(&ifmgd->mtx);
- return -ENOLINK;
- }
-
- mutex_unlock(&ifmgd->mtx);
-
printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n",
sdata->name, bssid, req->reason_code);
@@ -2640,7 +1999,7 @@
* to cfg80211 while that's in a locked section already
* trying to tell us that the user wants to disconnect.
*/
- if (&ifmgd->associated->cbss != req->bss) {
+ if (ifmgd->associated != req->bss) {
mutex_unlock(&ifmgd->mtx);
return -ENOLINK;
}
@@ -2648,7 +2007,7 @@
printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
sdata->name, req->bss->bssid, req->reason_code);
- ieee80211_set_disassoc(sdata, false);
+ ieee80211_set_disassoc(sdata);
mutex_unlock(&ifmgd->mtx);
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
new file mode 100644
index 0000000..a7bbfc4
--- /dev/null
+++ b/net/mac80211/offchannel.c
@@ -0,0 +1,168 @@
+/*
+ * Off-channel operation helpers
+ *
+ * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright 2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+/*
+ * inform AP that we will go to sleep so that it will buffer the frames
+ * while we scan
+ */
+static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ local->offchannel_ps_enabled = false;
+
+ /* FIXME: what to do when local->pspolling is true? */
+
+ del_timer_sync(&local->dynamic_ps_timer);
+ cancel_work_sync(&local->dynamic_ps_enable_work);
+
+ if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+ local->offchannel_ps_enabled = true;
+ local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+
+ if (!(local->offchannel_ps_enabled) ||
+ !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
+ /*
+ * If power save was enabled, no need to send a nullfunc
+ * frame because AP knows that we are sleeping. But if the
+ * hardware is creating the nullfunc frame for power save
+ * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
+ * enabled) and power save was enabled, the firmware just
+ * sent a null frame with power save disabled. So we need
+ * to send a new nullfunc frame to inform the AP that we
+ * are again sleeping.
+ */
+ ieee80211_send_nullfunc(local, sdata, 1);
+}
+
+/* inform AP that we are awake again, unless power save is enabled */
+static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (!local->ps_sdata)
+ ieee80211_send_nullfunc(local, sdata, 0);
+ else if (local->offchannel_ps_enabled) {
+ /*
+ * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
+ * will send a nullfunc frame with the powersave bit set
+ * even though the AP already knows that we are sleeping.
+ * This could be avoided by sending a null frame with power
+ * save bit disabled before enabling the power save, but
+ * this doesn't gain anything.
+ *
+ * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
+ * to send a nullfunc frame because AP already knows that
+ * we are sleeping, let's just enable power save mode in
+ * hardware.
+ */
+ local->hw.conf.flags |= IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ } else if (local->hw.conf.dynamic_ps_timeout > 0) {
+ /*
+ * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
+ * had been running before leaving the operating channel,
+ * restart the timer now and send a nullfunc frame to inform
+ * the AP that we are awake.
+ */
+ ieee80211_send_nullfunc(local, sdata, 0);
+ mod_timer(&local->dynamic_ps_timer, jiffies +
+ msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
+ }
+}
+
+void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ /* disable beaconing */
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
+
+ /*
+ * only handle non-STA interfaces here, STA interfaces
+ * are handled in ieee80211_offchannel_stop_station(),
+ * e.g., from the background scan state machine.
+ *
+ * In addition, do not stop monitor interface to allow it to be
+ * used from user space controlled off-channel operations.
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_MONITOR)
+ netif_stop_queue(sdata->dev);
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
+
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ /*
+ * notify the AP about us leaving the channel and stop all STA interfaces
+ */
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ netif_stop_queue(sdata->dev);
+ if (sdata->u.mgd.associated)
+ ieee80211_offchannel_ps_enable(sdata);
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
+
+void ieee80211_offchannel_return(struct ieee80211_local *local,
+ bool enable_beaconing)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ /* Tell AP we're back */
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.associated)
+ ieee80211_offchannel_ps_disable(sdata);
+ netif_wake_queue(sdata->dev);
+ }
+
+ /* re-enable beaconing */
+ if (enable_beaconing &&
+ (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT))
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 05e161c..47f8189 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -10,7 +10,6 @@
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_if_init_conf conf;
struct sta_info *sta;
unsigned long flags;
@@ -93,17 +92,14 @@
break;
}
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
/* disable beaconing */
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->vif.addr;
- drv_remove_interface(local, &conf);
+ drv_remove_interface(local, &sdata->vif);
}
/* stop hardware - this must stop RX */
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6cbf1a7..bfcf09e 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -289,7 +289,7 @@
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES)
continue;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (prev_dev) {
@@ -1945,6 +1945,7 @@
{
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
+ ieee80211_rx_result rxs;
if (!(rx->flags & IEEE80211_RX_RA_MATCH))
return RX_DROP_MONITOR;
@@ -1952,6 +1953,10 @@
if (ieee80211_drop_unencrypted(rx, mgmt->frame_control))
return RX_DROP_MONITOR;
+ rxs = ieee80211_work_rx_mgmt(rx->sdata, rx->skb);
+ if (rxs != RX_CONTINUE)
+ return rxs;
+
if (ieee80211_vif_is_mesh(&sdata->vif))
return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
@@ -2056,7 +2061,7 @@
skb->protocol = htons(ETH_P_802_2);
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type != NL80211_IFTYPE_MONITOR ||
@@ -2318,7 +2323,7 @@
}
if (!found_sta) {
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 66da0ab..365f409 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -29,16 +29,19 @@
ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len)
{
- return (void *)cfg80211_get_bss(local->hw.wiphy,
- ieee80211_get_channel(local->hw.wiphy,
- freq),
- bssid, ssid, ssid_len,
- 0, 0);
+ struct cfg80211_bss *cbss;
+
+ cbss = cfg80211_get_bss(local->hw.wiphy,
+ ieee80211_get_channel(local->hw.wiphy, freq),
+ bssid, ssid, ssid_len, 0, 0);
+ if (!cbss)
+ return NULL;
+ return (void *)cbss->priv;
}
static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss)
{
- struct ieee80211_bss *bss = (void *)cbss;
+ struct ieee80211_bss *bss = (void *)cbss->priv;
kfree(bss_mesh_id(bss));
kfree(bss_mesh_cfg(bss));
@@ -47,7 +50,9 @@
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss)
{
- cfg80211_put_bss((struct cfg80211_bss *)bss);
+ if (!bss)
+ return;
+ cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv));
}
struct ieee80211_bss *
@@ -59,6 +64,7 @@
struct ieee80211_channel *channel,
bool beacon)
{
+ struct cfg80211_bss *cbss;
struct ieee80211_bss *bss;
int clen;
s32 signal = 0;
@@ -68,13 +74,14 @@
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
signal = (rx_status->signal * 100) / local->hw.max_signal;
- bss = (void *)cfg80211_inform_bss_frame(local->hw.wiphy, channel,
- mgmt, len, signal, GFP_ATOMIC);
+ cbss = cfg80211_inform_bss_frame(local->hw.wiphy, channel,
+ mgmt, len, signal, GFP_ATOMIC);
- if (!bss)
+ if (!cbss)
return NULL;
- bss->cbss.free_priv = ieee80211_rx_bss_free;
+ cbss->free_priv = ieee80211_rx_bss_free;
+ bss = (void *)cbss->priv;
/* save the ERP value so that it is available at association time */
if (elems->erp_info && elems->erp_info_len >= 1) {
@@ -220,82 +227,9 @@
return true;
}
-/*
- * inform AP that we will go to sleep so that it will buffer the frames
- * while we scan
- */
-static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_local *local = sdata->local;
-
- local->scan_ps_enabled = false;
-
- /* FIXME: what to do when local->pspolling is true? */
-
- del_timer_sync(&local->dynamic_ps_timer);
- cancel_work_sync(&local->dynamic_ps_enable_work);
-
- if (local->hw.conf.flags & IEEE80211_CONF_PS) {
- local->scan_ps_enabled = true;
- local->hw.conf.flags &= ~IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- }
-
- if (!(local->scan_ps_enabled) ||
- !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
- /*
- * If power save was enabled, no need to send a nullfunc
- * frame because AP knows that we are sleeping. But if the
- * hardware is creating the nullfunc frame for power save
- * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
- * enabled) and power save was enabled, the firmware just
- * sent a null frame with power save disabled. So we need
- * to send a new nullfunc frame to inform the AP that we
- * are again sleeping.
- */
- ieee80211_send_nullfunc(local, sdata, 1);
-}
-
-/* inform AP that we are awake again, unless power save is enabled */
-static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_local *local = sdata->local;
-
- if (!local->ps_sdata)
- ieee80211_send_nullfunc(local, sdata, 0);
- else if (local->scan_ps_enabled) {
- /*
- * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
- * will send a nullfunc frame with the powersave bit set
- * even though the AP already knows that we are sleeping.
- * This could be avoided by sending a null frame with power
- * save bit disabled before enabling the power save, but
- * this doesn't gain anything.
- *
- * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
- * to send a nullfunc frame because AP already knows that
- * we are sleeping, let's just enable power save mode in
- * hardware.
- */
- local->hw.conf.flags |= IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- } else if (local->hw.conf.dynamic_ps_timeout > 0) {
- /*
- * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
- * had been running before leaving the operating channel,
- * restart the timer now and send a nullfunc frame to inform
- * the AP that we are awake.
- */
- ieee80211_send_nullfunc(local, sdata, 0);
- mod_timer(&local->dynamic_ps_timer, jiffies +
- msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
- }
-}
-
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
{
struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
bool was_hw_scan;
mutex_lock(&local->scan_mtx);
@@ -344,28 +278,7 @@
drv_sw_scan_complete(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated) {
- ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
- }
- } else
- netif_wake_queue(sdata->dev);
-
- /* re-enable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, true);
done:
ieee80211_recalc_idle(local);
@@ -377,8 +290,6 @@
static int ieee80211_start_sw_scan(struct ieee80211_local *local)
{
- struct ieee80211_sub_if_data *sdata;
-
/*
* Hardware/driver doesn't support hw_scan, so use software
* scanning instead. First send a nullfunc frame with power save
@@ -394,33 +305,15 @@
*/
drv_sw_scan_start(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* disable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
-
- /*
- * only handle non-STA interfaces here, STA interfaces
- * are handled in the scan state machine
- */
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_stop_queue(sdata->dev);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_stop_beaconing(local);
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
+ drv_flush(local, false);
+
ieee80211_configure_filter(local);
- /* TODO: start scan as soon as all nullfunc frames are ACKed */
ieee80211_queue_delayed_work(&local->hw,
&local->scan_work,
IEEE80211_CHANNEL_TIME);
@@ -433,7 +326,6 @@
struct cfg80211_scan_request *req)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
int rc;
if (local->scan_req)
@@ -463,11 +355,8 @@
local->scan_req = req;
local->scan_sdata = sdata;
- if (req != local->int_scan_req &&
- sdata->vif.type == NL80211_IFTYPE_STATION &&
- !list_empty(&ifmgd->work_list)) {
- /* actually wait for the work it's doing to finish/time out */
- set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+ if (!list_empty(&local->work_list)) {
+ /* wait for the work to finish/time out */
return 0;
}
@@ -526,7 +415,7 @@
/* check if at least one STA interface is associated */
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
@@ -564,56 +453,35 @@
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata;
-
- /*
- * notify the AP about us leaving the channel and stop all STA interfaces
- */
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_stop_queue(sdata->dev);
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_enable(sdata);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_stop_station(local);
__set_bit(SCAN_OFF_CHANNEL, &local->scanning);
+ /*
+ * What if the nullfunc frames didn't arrive?
+ */
+ drv_flush(local, false);
+ if (local->ops->flush)
+ *next_delay = 0;
+ else
+ *next_delay = HZ / 10;
+
/* advance to the next channel to be scanned */
- *next_delay = HZ / 10;
local->next_scan_state = SCAN_SET_CHANNEL;
}
static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-
/* switch back to the operating channel */
local->scan_channel = NULL;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
/*
- * notify the AP about us being back and restart all STA interfaces
+ * Only re-enable station mode interface now; beaconing will be
+ * re-enabled once the full scan has been completed.
*/
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, false);
__clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
@@ -727,7 +595,7 @@
/*
* Avoid re-scheduling when the sdata is going away.
*/
- if (!netif_running(sdata->dev)) {
+ if (!ieee80211_sdata_running(sdata)) {
ieee80211_scan_completed(&local->hw, true);
return;
}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index d1a77e7..47da552 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -359,6 +359,7 @@
{
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct station_info sinfo;
unsigned long flags;
int err = 0;
@@ -367,7 +368,7 @@
* something inserts a STA (on one CPU) without holding the RTNL
* and another CPU turns off the net device.
*/
- if (unlikely(!netif_running(sdata->dev))) {
+ if (unlikely(!ieee80211_sdata_running(sdata))) {
err = -ENETDOWN;
goto out_free;
}
@@ -408,6 +409,10 @@
spin_unlock_irqrestore(&local->sta_lock, flags);
+ sinfo.filled = 0;
+ sinfo.generation = local->sta_generation;
+ cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_ATOMIC);
+
#ifdef CONFIG_MAC80211_DEBUGFS
/*
* Debugfs entry adding might sleep, so schedule process
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 0c0850d..0ebcdda 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -351,7 +351,7 @@
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ac48c86..7bba49d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1418,6 +1418,10 @@
if (!local->ps_sdata)
return false;
+ /* No point if we're going to suspend */
+ if (local->quiescing)
+ return false;
+
return true;
}
@@ -1469,7 +1473,7 @@
list_for_each_entry_rcu(tmp_sdata, &local->interfaces,
list) {
- if (!netif_running(tmp_sdata->dev))
+ if (!ieee80211_sdata_running(tmp_sdata))
continue;
if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
continue;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index b019725..7e38858 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -468,7 +468,7 @@
case NL80211_IFTYPE_MESH_POINT:
break;
}
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
iterator(data, sdata->vif.addr,
&sdata->vif);
}
@@ -502,7 +502,7 @@
case NL80211_IFTYPE_MESH_POINT:
break;
}
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
iterator(data, sdata->vif.addr,
&sdata->vif);
}
@@ -881,30 +881,66 @@
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
- u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
- int i;
+ u8 *pos;
+ size_t offset = 0, noffset;
+ int supp_rates_len, i;
sband = local->hw.wiphy->bands[band];
pos = buffer;
+ supp_rates_len = min_t(int, sband->n_bitrates, 8);
+
*pos++ = WLAN_EID_SUPP_RATES;
- supp_rates_len = pos;
- *pos++ = 0;
+ *pos++ = supp_rates_len;
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
+ for (i = 0; i < supp_rates_len; i++) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
- if (esupp_rates_len) {
- *esupp_rates_len += 1;
- } else if (*supp_rates_len == 8) {
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- esupp_rates_len = pos;
- *pos++ = 1;
- } else
- *supp_rates_len += 1;
+ /* insert "request information" if in custom IEs */
+ if (ie && ie_len) {
+ static const u8 before_extrates[] = {
+ WLAN_EID_SSID,
+ WLAN_EID_SUPP_RATES,
+ WLAN_EID_REQUEST,
+ };
+ noffset = ieee80211_ie_split(ie, ie_len,
+ before_extrates,
+ ARRAY_SIZE(before_extrates),
+ offset);
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
+ offset = noffset;
+ }
- *pos++ = rate->bitrate / 5;
+ if (sband->n_bitrates > i) {
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = sband->n_bitrates - i;
+
+ for (; i < sband->n_bitrates; i++) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+ }
+
+ /* insert custom IEs that go before HT */
+ if (ie && ie_len) {
+ static const u8 before_ht[] = {
+ WLAN_EID_SSID,
+ WLAN_EID_SUPP_RATES,
+ WLAN_EID_REQUEST,
+ WLAN_EID_EXT_SUPP_RATES,
+ WLAN_EID_DS_PARAMS,
+ WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
+ };
+ noffset = ieee80211_ie_split(ie, ie_len,
+ before_ht, ARRAY_SIZE(before_ht),
+ offset);
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
+ offset = noffset;
}
if (sband->ht_cap.ht_supported) {
@@ -936,9 +972,11 @@
* that calculates local->scan_ies_len.
*/
- if (ie) {
- memcpy(pos, ie, ie_len);
- pos += ie_len;
+ /* add any remaining custom IEs */
+ if (ie && ie_len) {
+ noffset = ie_len;
+ memcpy(pos, ie + offset, noffset - offset);
+ pos += noffset - offset;
}
return pos - buffer;
@@ -1037,7 +1075,6 @@
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_if_init_conf conf;
struct sta_info *sta;
unsigned long flags;
int res;
@@ -1047,7 +1084,19 @@
/* restart hardware */
if (local->open_count) {
+ /*
+ * Upon resume hardware can sometimes be goofy due to
+ * various platform / driver / bus issues, so restarting
+ * the device may at times not work immediately. Propagate
+ * the error.
+ */
res = drv_start(local);
+ if (res) {
+ WARN(local->suspended, "Harware became unavailable "
+ "upon resume. This is could be a software issue"
+ "prior to suspend or a harware issue\n");
+ return res;
+ }
ieee80211_led_radio(local, true);
}
@@ -1056,12 +1105,8 @@
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_MONITOR &&
- netif_running(sdata->dev)) {
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->vif.addr;
- res = drv_add_interface(local, &conf);
- }
+ ieee80211_sdata_running(sdata))
+ res = drv_add_interface(local, &sdata->vif);
}
/* add STAs back */
@@ -1103,7 +1148,7 @@
/* Finally also reconfigure all the BSS information */
list_for_each_entry(sdata, &local->interfaces, list) {
u32 changed = ~0;
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
@@ -1131,7 +1176,7 @@
/* add back keys */
list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
+ if (ieee80211_sdata_running(sdata))
ieee80211_enable_keys(sdata);
ieee80211_wake_queues_by_reason(hw,
@@ -1252,3 +1297,59 @@
/* changed flag is auto-detected for this */
ieee80211_hw_config(local, 0);
}
+
+static bool ieee80211_id_in_list(const u8 *ids, int n_ids, u8 id)
+{
+ int i;
+
+ for (i = 0; i < n_ids; i++)
+ if (ids[i] == id)
+ return true;
+ return false;
+}
+
+/**
+ * ieee80211_ie_split - split an IE buffer according to ordering
+ *
+ * @ies: the IE buffer
+ * @ielen: the length of the IE buffer
+ * @ids: an array with element IDs that are allowed before
+ * the split
+ * @n_ids: the size of the element ID array
+ * @offset: offset where to start splitting in the buffer
+ *
+ * This function splits an IE buffer by updating the @offset
+ * variable to point to the location where the buffer should be
+ * split.
+ *
+ * It assumes that the given IE buffer is well-formed, this
+ * has to be guaranteed by the caller!
+ *
+ * It also assumes that the IEs in the buffer are ordered
+ * correctly, if not the result of using this function will not
+ * be ordered correctly either, i.e. it does no reordering.
+ *
+ * The function returns the offset where the next part of the
+ * buffer starts, which may be @ielen if the entire (remainder)
+ * of the buffer should be used.
+ */
+size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
+ const u8 *ids, int n_ids, size_t offset)
+{
+ size_t pos = offset;
+
+ while (pos < ielen && ieee80211_id_in_list(ids, n_ids, ies[pos]))
+ pos += 2 + ies[pos + 1];
+
+ return pos;
+}
+
+size_t ieee80211_ie_split_vendor(const u8 *ies, size_t ielen, size_t offset)
+{
+ size_t pos = offset;
+
+ while (pos < ielen && ies[pos] != WLAN_EID_VENDOR_SPECIFIC)
+ pos += 2 + ies[pos + 1];
+
+ return pos;
+}
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
new file mode 100644
index 0000000..ea89ed7
--- /dev/null
+++ b/net/mac80211/work.c
@@ -0,0 +1,1086 @@
+/*
+ * mac80211 work implementation
+ *
+ * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
+ * Copyright 2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2009, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "ieee80211_i.h"
+#include "rate.h"
+
+#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
+#define IEEE80211_AUTH_MAX_TRIES 3
+#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
+#define IEEE80211_ASSOC_MAX_TRIES 3
+#define IEEE80211_MAX_PROBE_TRIES 5
+
+enum work_action {
+ WORK_ACT_NONE,
+ WORK_ACT_TIMEOUT,
+ WORK_ACT_DONE,
+};
+
+
+/* utils */
+static inline void ASSERT_WORK_MTX(struct ieee80211_local *local)
+{
+ WARN_ON(!mutex_is_locked(&local->work_mtx));
+}
+
+/*
+ * We can have multiple work items (and connection probing)
+ * scheduling this timer, but we need to take care to only
+ * reschedule it when it should fire _earlier_ than it was
+ * asked for before, or if it's not pending right now. This
+ * function ensures that. Note that it then is required to
+ * run this function for all timeouts after the first one
+ * has happened -- the work that runs from this timer will
+ * do that.
+ */
+static void run_again(struct ieee80211_local *local,
+ unsigned long timeout)
+{
+ ASSERT_WORK_MTX(local);
+
+ if (!timer_pending(&local->work_timer) ||
+ time_before(timeout, local->work_timer.expires))
+ mod_timer(&local->work_timer, timeout);
+}
+
+static void work_free_rcu(struct rcu_head *head)
+{
+ struct ieee80211_work *wk =
+ container_of(head, struct ieee80211_work, rcu_head);
+
+ kfree(wk);
+}
+
+void free_work(struct ieee80211_work *wk)
+{
+ call_rcu(&wk->rcu_head, work_free_rcu);
+}
+
+static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len,
+ struct ieee80211_supported_band *sband,
+ u32 *rates)
+{
+ int i, j, count;
+ *rates = 0;
+ count = 0;
+ for (i = 0; i < supp_rates_len; i++) {
+ int rate = (supp_rates[i] & 0x7F) * 5;
+
+ for (j = 0; j < sband->n_bitrates; j++)
+ if (sband->bitrates[j].bitrate == rate) {
+ *rates |= BIT(j);
+ count++;
+ break;
+ }
+ }
+
+ return count;
+}
+
+/* frame sending functions */
+
+static void ieee80211_add_ht_ie(struct sk_buff *skb, const u8 *ht_info_ie,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_channel *channel,
+ enum ieee80211_smps_mode smps)
+{
+ struct ieee80211_ht_info *ht_info;
+ u8 *pos;
+ u32 flags = channel->flags;
+ u16 cap = sband->ht_cap.cap;
+ __le16 tmp;
+
+ if (!sband->ht_cap.ht_supported)
+ return;
+
+ if (!ht_info_ie)
+ return;
+
+ if (ht_info_ie[1] < sizeof(struct ieee80211_ht_info))
+ return;
+
+ ht_info = (struct ieee80211_ht_info *)(ht_info_ie + 2);
+
+ /* determine capability flags */
+
+ if (ieee80211_disable_40mhz_24ghz &&
+ sband->band == IEEE80211_BAND_2GHZ) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+
+ switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+ break;
+ }
+
+ /* set SM PS mode properly */
+ cap &= ~IEEE80211_HT_CAP_SM_PS;
+ switch (smps) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_NUM_MODES:
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:
+ cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ }
+
+ /* reserve and fill IE */
+
+ pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+ *pos++ = WLAN_EID_HT_CAPABILITY;
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+
+ /* capability flags */
+ tmp = cpu_to_le16(cap);
+ memcpy(pos, &tmp, sizeof(u16));
+ pos += sizeof(u16);
+
+ /* AMPDU parameters */
+ *pos++ = sband->ht_cap.ampdu_factor |
+ (sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+
+ /* MCS set */
+ memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+ pos += sizeof(sband->ht_cap.mcs);
+
+ /* extended capabilities */
+ pos += sizeof(__le16);
+
+ /* BF capabilities */
+ pos += sizeof(__le32);
+
+ /* antenna selection */
+ pos += sizeof(u8);
+}
+
+static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_work *wk)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *mgmt;
+ u8 *pos;
+ const u8 *ies;
+ size_t offset = 0, noffset;
+ int i, len, count, rates_len, supp_rates_len;
+ u16 capab;
+ struct ieee80211_supported_band *sband;
+ u32 rates = 0;
+
+ sband = local->hw.wiphy->bands[wk->chan->band];
+
+ /*
+ * Get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode)...
+ */
+ rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates,
+ wk->assoc.supp_rates_len,
+ sband, &rates);
+
+ skb = alloc_skb(local->hw.extra_tx_headroom +
+ sizeof(*mgmt) + /* bit too much but doesn't matter */
+ 2 + wk->assoc.ssid_len + /* SSID */
+ 4 + rates_len + /* (extended) rates */
+ 4 + /* power capability */
+ 2 + 2 * sband->n_channels + /* supported channels */
+ 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
+ wk->ie_len + /* extra IEs */
+ 9, /* WMM */
+ GFP_KERNEL);
+ if (!skb) {
+ printk(KERN_DEBUG "%s: failed to allocate buffer for assoc "
+ "frame\n", sdata->name);
+ return;
+ }
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+
+ capab = WLAN_CAPABILITY_ESS;
+
+ if (sband->band == IEEE80211_BAND_2GHZ) {
+ if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE))
+ capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
+ if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE))
+ capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
+ }
+
+ if (wk->assoc.capability & WLAN_CAPABILITY_PRIVACY)
+ capab |= WLAN_CAPABILITY_PRIVACY;
+
+ if ((wk->assoc.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
+ (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
+ capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
+
+ mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
+ memset(mgmt, 0, 24);
+ memcpy(mgmt->da, wk->filter_ta, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
+ memcpy(mgmt->bssid, wk->filter_ta, ETH_ALEN);
+
+ if (!is_zero_ether_addr(wk->assoc.prev_bssid)) {
+ skb_put(skb, 10);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_REASSOC_REQ);
+ mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
+ mgmt->u.reassoc_req.listen_interval =
+ cpu_to_le16(local->hw.conf.listen_interval);
+ memcpy(mgmt->u.reassoc_req.current_ap, wk->assoc.prev_bssid,
+ ETH_ALEN);
+ } else {
+ skb_put(skb, 4);
+ mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ASSOC_REQ);
+ mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
+ mgmt->u.assoc_req.listen_interval =
+ cpu_to_le16(local->hw.conf.listen_interval);
+ }
+
+ /* SSID */
+ ies = pos = skb_put(skb, 2 + wk->assoc.ssid_len);
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = wk->assoc.ssid_len;
+ memcpy(pos, wk->assoc.ssid, wk->assoc.ssid_len);
+
+ /* add all rates which were marked to be used above */
+ supp_rates_len = rates_len;
+ if (supp_rates_len > 8)
+ supp_rates_len = 8;
+
+ len = sband->n_bitrates;
+ pos = skb_put(skb, supp_rates_len + 2);
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos++ = supp_rates_len;
+
+ count = 0;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ if (++count == 8)
+ break;
+ }
+ }
+
+ if (rates_len > count) {
+ pos = skb_put(skb, rates_len - count + 2);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = rates_len - count;
+
+ for (i++; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+ }
+ }
+
+ if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
+ /* 1. power capabilities */
+ pos = skb_put(skb, 4);
+ *pos++ = WLAN_EID_PWR_CAPABILITY;
+ *pos++ = 2;
+ *pos++ = 0; /* min tx power */
+ *pos++ = wk->chan->max_power; /* max tx power */
+
+ /* 2. supported channels */
+ /* TODO: get this in reg domain format */
+ pos = skb_put(skb, 2 * sband->n_channels + 2);
+ *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
+ *pos++ = 2 * sband->n_channels;
+ for (i = 0; i < sband->n_channels; i++) {
+ *pos++ = ieee80211_frequency_to_channel(
+ sband->channels[i].center_freq);
+ *pos++ = 1; /* one channel in the subband*/
+ }
+ }
+
+ /* if present, add any custom IEs that go before HT */
+ if (wk->ie_len && wk->ie) {
+ static const u8 before_ht[] = {
+ WLAN_EID_SSID,
+ WLAN_EID_SUPP_RATES,
+ WLAN_EID_EXT_SUPP_RATES,
+ WLAN_EID_PWR_CAPABILITY,
+ WLAN_EID_SUPPORTED_CHANNELS,
+ WLAN_EID_RSN,
+ WLAN_EID_QOS_CAPA,
+ WLAN_EID_RRM_ENABLED_CAPABILITIES,
+ WLAN_EID_MOBILITY_DOMAIN,
+ WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
+ };
+ noffset = ieee80211_ie_split(wk->ie, wk->ie_len,
+ before_ht, ARRAY_SIZE(before_ht),
+ offset);
+ pos = skb_put(skb, noffset - offset);
+ memcpy(pos, wk->ie + offset, noffset - offset);
+ offset = noffset;
+ }
+
+ if (wk->assoc.use_11n && wk->assoc.wmm_used &&
+ local->hw.queues >= 4)
+ ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie,
+ sband, wk->chan, wk->assoc.smps);
+
+ /* if present, add any custom non-vendor IEs that go after HT */
+ if (wk->ie_len && wk->ie) {
+ noffset = ieee80211_ie_split_vendor(wk->ie, wk->ie_len,
+ offset);
+ pos = skb_put(skb, noffset - offset);
+ memcpy(pos, wk->ie + offset, noffset - offset);
+ offset = noffset;
+ }
+
+ if (wk->assoc.wmm_used && local->hw.queues >= 4) {
+ pos = skb_put(skb, 9);
+ *pos++ = WLAN_EID_VENDOR_SPECIFIC;
+ *pos++ = 7; /* len */
+ *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */
+ *pos++ = 0x50;
+ *pos++ = 0xf2;
+ *pos++ = 2; /* WME */
+ *pos++ = 0; /* WME info */
+ *pos++ = 1; /* WME ver */
+ *pos++ = 0;
+ }
+
+ /* add any remaining custom (i.e. vendor specific here) IEs */
+ if (wk->ie_len && wk->ie) {
+ noffset = wk->ie_len;
+ pos = skb_put(skb, noffset - offset);
+ memcpy(pos, wk->ie + offset, noffset - offset);
+ }
+
+ IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ ieee80211_tx_skb(sdata, skb);
+}
+
+static void ieee80211_remove_auth_bss(struct ieee80211_local *local,
+ struct ieee80211_work *wk)
+{
+ struct cfg80211_bss *cbss;
+ u16 capa_val = WLAN_CAPABILITY_ESS;
+
+ if (wk->probe_auth.privacy)
+ capa_val |= WLAN_CAPABILITY_PRIVACY;
+
+ cbss = cfg80211_get_bss(local->hw.wiphy, wk->chan, wk->filter_ta,
+ wk->probe_auth.ssid, wk->probe_auth.ssid_len,
+ WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY,
+ capa_val);
+ if (!cbss)
+ return;
+
+ cfg80211_unlink_bss(local->hw.wiphy, cbss);
+ cfg80211_put_bss(cbss);
+}
+
+static enum work_action __must_check
+ieee80211_direct_probe(struct ieee80211_work *wk)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ struct ieee80211_local *local = sdata->local;
+
+ wk->probe_auth.tries++;
+ if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) {
+ printk(KERN_DEBUG "%s: direct probe to %pM timed out\n",
+ sdata->name, wk->filter_ta);
+
+ /*
+ * Most likely AP is not in the range so remove the
+ * bss struct for that AP.
+ */
+ ieee80211_remove_auth_bss(local, wk);
+
+ return WORK_ACT_TIMEOUT;
+ }
+
+ printk(KERN_DEBUG "%s: direct probe to %pM (try %d)\n",
+ sdata->name, wk->filter_ta, wk->probe_auth.tries);
+
+ /*
+ * Direct probe is sent to broadcast address as some APs
+ * will not answer to direct packet in unassociated state.
+ */
+ ieee80211_send_probe_req(sdata, NULL, wk->probe_auth.ssid,
+ wk->probe_auth.ssid_len, NULL, 0);
+
+ wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ run_again(local, wk->timeout);
+
+ return WORK_ACT_NONE;
+}
+
+
+static enum work_action __must_check
+ieee80211_authenticate(struct ieee80211_work *wk)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ struct ieee80211_local *local = sdata->local;
+
+ wk->probe_auth.tries++;
+ if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) {
+ printk(KERN_DEBUG "%s: authentication with %pM"
+ " timed out\n", sdata->name, wk->filter_ta);
+
+ /*
+ * Most likely AP is not in the range so remove the
+ * bss struct for that AP.
+ */
+ ieee80211_remove_auth_bss(local, wk);
+
+ return WORK_ACT_TIMEOUT;
+ }
+
+ printk(KERN_DEBUG "%s: authenticate with %pM (try %d)\n",
+ sdata->name, wk->filter_ta, wk->probe_auth.tries);
+
+ ieee80211_send_auth(sdata, 1, wk->probe_auth.algorithm, wk->ie,
+ wk->ie_len, wk->filter_ta, NULL, 0, 0);
+ wk->probe_auth.transaction = 2;
+
+ wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ run_again(local, wk->timeout);
+
+ return WORK_ACT_NONE;
+}
+
+static enum work_action __must_check
+ieee80211_associate(struct ieee80211_work *wk)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ struct ieee80211_local *local = sdata->local;
+
+ wk->assoc.tries++;
+ if (wk->assoc.tries > IEEE80211_ASSOC_MAX_TRIES) {
+ printk(KERN_DEBUG "%s: association with %pM"
+ " timed out\n",
+ sdata->name, wk->filter_ta);
+
+ /*
+ * Most likely AP is not in the range so remove the
+ * bss struct for that AP.
+ */
+ if (wk->assoc.bss)
+ cfg80211_unlink_bss(local->hw.wiphy, wk->assoc.bss);
+
+ return WORK_ACT_TIMEOUT;
+ }
+
+ printk(KERN_DEBUG "%s: associate with %pM (try %d)\n",
+ sdata->name, wk->filter_ta, wk->assoc.tries);
+ ieee80211_send_assoc(sdata, wk);
+
+ wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
+ run_again(local, wk->timeout);
+
+ return WORK_ACT_NONE;
+}
+
+static enum work_action __must_check
+ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk)
+{
+ /*
+ * First time we run, do nothing -- the generic code will
+ * have switched to the right channel etc.
+ */
+ if (!wk->remain.started) {
+ wk->remain.started = true;
+ wk->timeout = jiffies + msecs_to_jiffies(wk->remain.duration);
+
+ cfg80211_ready_on_channel(wk->sdata->dev, (u64)wk, wk->chan,
+ wk->chan_type, wk->remain.duration,
+ GFP_KERNEL);
+
+ return WORK_ACT_NONE;
+ }
+
+ return WORK_ACT_TIMEOUT;
+}
+
+static void ieee80211_auth_challenge(struct ieee80211_work *wk,
+ struct ieee80211_mgmt *mgmt,
+ size_t len)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ u8 *pos;
+ struct ieee802_11_elems elems;
+
+ pos = mgmt->u.auth.variable;
+ ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
+ if (!elems.challenge)
+ return;
+ ieee80211_send_auth(sdata, 3, wk->probe_auth.algorithm,
+ elems.challenge - 2, elems.challenge_len + 2,
+ wk->filter_ta, wk->probe_auth.key,
+ wk->probe_auth.key_len, wk->probe_auth.key_idx);
+ wk->probe_auth.transaction = 4;
+}
+
+static enum work_action __must_check
+ieee80211_rx_mgmt_auth(struct ieee80211_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len)
+{
+ u16 auth_alg, auth_transaction, status_code;
+
+ if (wk->type != IEEE80211_WORK_AUTH)
+ return WORK_ACT_NONE;
+
+ if (len < 24 + 6)
+ return WORK_ACT_NONE;
+
+ auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
+ auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
+ status_code = le16_to_cpu(mgmt->u.auth.status_code);
+
+ if (auth_alg != wk->probe_auth.algorithm ||
+ auth_transaction != wk->probe_auth.transaction)
+ return WORK_ACT_NONE;
+
+ if (status_code != WLAN_STATUS_SUCCESS) {
+ printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n",
+ wk->sdata->name, mgmt->sa, status_code);
+ return WORK_ACT_DONE;
+ }
+
+ switch (wk->probe_auth.algorithm) {
+ case WLAN_AUTH_OPEN:
+ case WLAN_AUTH_LEAP:
+ case WLAN_AUTH_FT:
+ break;
+ case WLAN_AUTH_SHARED_KEY:
+ if (wk->probe_auth.transaction != 4) {
+ ieee80211_auth_challenge(wk, mgmt, len);
+ /* need another frame */
+ return WORK_ACT_NONE;
+ }
+ break;
+ default:
+ WARN_ON(1);
+ return WORK_ACT_NONE;
+ }
+
+ printk(KERN_DEBUG "%s: authenticated\n", wk->sdata->name);
+ return WORK_ACT_DONE;
+}
+
+static enum work_action __must_check
+ieee80211_rx_mgmt_assoc_resp(struct ieee80211_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ bool reassoc)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ struct ieee80211_local *local = sdata->local;
+ u16 capab_info, status_code, aid;
+ struct ieee802_11_elems elems;
+ u8 *pos;
+
+ /*
+ * AssocResp and ReassocResp have identical structure, so process both
+ * of them in this function.
+ */
+
+ if (len < 24 + 6)
+ return WORK_ACT_NONE;
+
+ capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
+ status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+ aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+
+ printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x "
+ "status=%d aid=%d)\n",
+ sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
+ capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
+
+ pos = mgmt->u.assoc_resp.variable;
+ ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
+
+ if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
+ elems.timeout_int && elems.timeout_int_len == 5 &&
+ elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) {
+ u32 tu, ms;
+ tu = get_unaligned_le32(elems.timeout_int + 1);
+ ms = tu * 1024 / 1000;
+ printk(KERN_DEBUG "%s: %pM rejected association temporarily; "
+ "comeback duration %u TU (%u ms)\n",
+ sdata->name, mgmt->sa, tu, ms);
+ wk->timeout = jiffies + msecs_to_jiffies(ms);
+ if (ms > IEEE80211_ASSOC_TIMEOUT)
+ run_again(local, wk->timeout);
+ return WORK_ACT_NONE;
+ }
+
+ if (status_code != WLAN_STATUS_SUCCESS)
+ printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n",
+ sdata->name, mgmt->sa, status_code);
+ else
+ printk(KERN_DEBUG "%s: associated\n", sdata->name);
+
+ return WORK_ACT_DONE;
+}
+
+static enum work_action __must_check
+ieee80211_rx_mgmt_probe_resp(struct ieee80211_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ struct ieee80211_rx_status *rx_status)
+{
+ struct ieee80211_sub_if_data *sdata = wk->sdata;
+ struct ieee80211_local *local = sdata->local;
+ size_t baselen;
+
+ ASSERT_WORK_MTX(local);
+
+ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+ if (baselen > len)
+ return WORK_ACT_NONE;
+
+ printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name);
+ return WORK_ACT_DONE;
+}
+
+static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
+ struct sk_buff *skb)
+{
+ struct ieee80211_rx_status *rx_status;
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_work *wk;
+ enum work_action rma = WORK_ACT_NONE;
+ u16 fc;
+
+ rx_status = (struct ieee80211_rx_status *) skb->cb;
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ fc = le16_to_cpu(mgmt->frame_control);
+
+ mutex_lock(&local->work_mtx);
+
+ list_for_each_entry(wk, &local->work_list, list) {
+ const u8 *bssid = NULL;
+
+ switch (wk->type) {
+ case IEEE80211_WORK_DIRECT_PROBE:
+ case IEEE80211_WORK_AUTH:
+ case IEEE80211_WORK_ASSOC:
+ bssid = wk->filter_ta;
+ break;
+ default:
+ continue;
+ }
+
+ /*
+ * Before queuing, we already verified mgmt->sa,
+ * so this is needed just for matching.
+ */
+ if (compare_ether_addr(bssid, mgmt->bssid))
+ continue;
+
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PROBE_RESP:
+ rma = ieee80211_rx_mgmt_probe_resp(wk, mgmt, skb->len,
+ rx_status);
+ break;
+ case IEEE80211_STYPE_AUTH:
+ rma = ieee80211_rx_mgmt_auth(wk, mgmt, skb->len);
+ break;
+ case IEEE80211_STYPE_ASSOC_RESP:
+ rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt,
+ skb->len, false);
+ break;
+ case IEEE80211_STYPE_REASSOC_RESP:
+ rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt,
+ skb->len, true);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ /*
+ * We've processed this frame for that work, so it can't
+ * belong to another work struct.
+ * NB: this is also required for correctness for 'rma'!
+ */
+ break;
+ }
+
+ switch (rma) {
+ case WORK_ACT_NONE:
+ break;
+ case WORK_ACT_DONE:
+ list_del_rcu(&wk->list);
+ break;
+ default:
+ WARN(1, "unexpected: %d", rma);
+ }
+
+ mutex_unlock(&local->work_mtx);
+
+ if (rma != WORK_ACT_DONE)
+ goto out;
+
+ switch (wk->done(wk, skb)) {
+ case WORK_DONE_DESTROY:
+ free_work(wk);
+ break;
+ case WORK_DONE_REQUEUE:
+ synchronize_rcu();
+ wk->started = false; /* restart */
+ mutex_lock(&local->work_mtx);
+ list_add_tail(&wk->list, &local->work_list);
+ mutex_unlock(&local->work_mtx);
+ }
+
+ out:
+ kfree_skb(skb);
+}
+
+static void ieee80211_work_timer(unsigned long data)
+{
+ struct ieee80211_local *local = (void *) data;
+
+ if (local->quiescing)
+ return;
+
+ ieee80211_queue_work(&local->hw, &local->work_work);
+}
+
+static void ieee80211_work_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, work_work);
+ struct sk_buff *skb;
+ struct ieee80211_work *wk, *tmp;
+ LIST_HEAD(free_work);
+ enum work_action rma;
+ bool remain_off_channel = false;
+
+ if (local->scanning)
+ return;
+
+ /*
+ * ieee80211_queue_work() should have picked up most cases,
+ * here we'll pick the the rest.
+ */
+ if (WARN(local->suspended, "work scheduled while going to suspend\n"))
+ return;
+
+ /* first process frames to avoid timing out while a frame is pending */
+ while ((skb = skb_dequeue(&local->work_skb_queue)))
+ ieee80211_work_rx_queued_mgmt(local, skb);
+
+ ieee80211_recalc_idle(local);
+
+ mutex_lock(&local->work_mtx);
+
+ list_for_each_entry_safe(wk, tmp, &local->work_list, list) {
+ /* mark work as started if it's on the current off-channel */
+ if (!wk->started && local->tmp_channel &&
+ wk->chan == local->tmp_channel &&
+ wk->chan_type == local->tmp_channel_type) {
+ wk->started = true;
+ }
+
+ if (!wk->started && !local->tmp_channel) {
+ /*
+ * TODO: could optimize this by leaving the
+ * station vifs in awake mode if they
+ * happen to be on the same channel as
+ * the requested channel
+ */
+ ieee80211_offchannel_stop_beaconing(local);
+ ieee80211_offchannel_stop_station(local);
+
+ local->tmp_channel = wk->chan;
+ local->tmp_channel_type = wk->chan_type;
+ ieee80211_hw_config(local, 0);
+ wk->started = true;
+ wk->timeout = jiffies;
+ }
+
+ /* don't try to work with items that aren't started */
+ if (!wk->started)
+ continue;
+
+ if (time_is_after_jiffies(wk->timeout)) {
+ /*
+ * This work item isn't supposed to be worked on
+ * right now, but take care to adjust the timer
+ * properly.
+ */
+ run_again(local, wk->timeout);
+ continue;
+ }
+
+ switch (wk->type) {
+ default:
+ WARN_ON(1);
+ /* nothing */
+ rma = WORK_ACT_NONE;
+ break;
+ case IEEE80211_WORK_ABORT:
+ rma = WORK_ACT_TIMEOUT;
+ case IEEE80211_WORK_DIRECT_PROBE:
+ rma = ieee80211_direct_probe(wk);
+ break;
+ case IEEE80211_WORK_AUTH:
+ rma = ieee80211_authenticate(wk);
+ break;
+ case IEEE80211_WORK_ASSOC:
+ rma = ieee80211_associate(wk);
+ break;
+ case IEEE80211_WORK_REMAIN_ON_CHANNEL:
+ rma = ieee80211_remain_on_channel_timeout(wk);
+ break;
+ }
+
+ switch (rma) {
+ case WORK_ACT_NONE:
+ /* might have changed the timeout */
+ run_again(local, wk->timeout);
+ break;
+ case WORK_ACT_TIMEOUT:
+ list_del_rcu(&wk->list);
+ synchronize_rcu();
+ list_add(&wk->list, &free_work);
+ break;
+ default:
+ WARN(1, "unexpected: %d", rma);
+ }
+ }
+
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (!wk->started)
+ continue;
+ if (wk->chan != local->tmp_channel)
+ continue;
+ if (wk->chan_type != local->tmp_channel_type)
+ continue;
+ remain_off_channel = true;
+ }
+
+ if (!remain_off_channel && local->tmp_channel) {
+ local->tmp_channel = NULL;
+ ieee80211_hw_config(local, 0);
+ ieee80211_offchannel_return(local, true);
+ /* give connection some time to breathe */
+ run_again(local, jiffies + HZ/2);
+ }
+
+ if (list_empty(&local->work_list) && local->scan_req)
+ ieee80211_queue_delayed_work(&local->hw,
+ &local->scan_work,
+ round_jiffies_relative(0));
+
+ mutex_unlock(&local->work_mtx);
+
+ ieee80211_recalc_idle(local);
+
+ list_for_each_entry_safe(wk, tmp, &free_work, list) {
+ wk->done(wk, NULL);
+ list_del(&wk->list);
+ kfree(wk);
+ }
+}
+
+void ieee80211_add_work(struct ieee80211_work *wk)
+{
+ struct ieee80211_local *local;
+
+ if (WARN_ON(!wk->chan))
+ return;
+
+ if (WARN_ON(!wk->sdata))
+ return;
+
+ if (WARN_ON(!wk->done))
+ return;
+
+ wk->started = false;
+
+ local = wk->sdata->local;
+ mutex_lock(&local->work_mtx);
+ list_add_tail(&wk->list, &local->work_list);
+ mutex_unlock(&local->work_mtx);
+
+ ieee80211_queue_work(&local->hw, &local->work_work);
+}
+
+void ieee80211_work_init(struct ieee80211_local *local)
+{
+ mutex_init(&local->work_mtx);
+ INIT_LIST_HEAD(&local->work_list);
+ setup_timer(&local->work_timer, ieee80211_work_timer,
+ (unsigned long)local);
+ INIT_WORK(&local->work_work, ieee80211_work_work);
+ skb_queue_head_init(&local->work_skb_queue);
+}
+
+void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_work *wk;
+
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (wk->sdata != sdata)
+ continue;
+ wk->type = IEEE80211_WORK_ABORT;
+ wk->started = true;
+ wk->timeout = jiffies;
+ }
+ mutex_unlock(&local->work_mtx);
+
+ /* run cleanups etc. */
+ ieee80211_work_work(&local->work_work);
+
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (wk->sdata != sdata)
+ continue;
+ WARN_ON(1);
+ break;
+ }
+ mutex_unlock(&local->work_mtx);
+}
+
+ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_work *wk;
+ u16 fc;
+
+ if (skb->len < 24)
+ return RX_DROP_MONITOR;
+
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ fc = le16_to_cpu(mgmt->frame_control);
+
+ list_for_each_entry_rcu(wk, &local->work_list, list) {
+ if (sdata != wk->sdata)
+ continue;
+ if (compare_ether_addr(wk->filter_ta, mgmt->sa))
+ continue;
+ if (compare_ether_addr(wk->filter_ta, mgmt->bssid))
+ continue;
+
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_AUTH:
+ case IEEE80211_STYPE_PROBE_RESP:
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
+ case IEEE80211_STYPE_DEAUTH:
+ case IEEE80211_STYPE_DISASSOC:
+ skb_queue_tail(&local->work_skb_queue, skb);
+ ieee80211_queue_work(&local->hw, &local->work_work);
+ return RX_QUEUED;
+ }
+ }
+
+ return RX_CONTINUE;
+}
+
+static enum work_done_result ieee80211_remain_done(struct ieee80211_work *wk,
+ struct sk_buff *skb)
+{
+ /*
+ * We are done serving the remain-on-channel command.
+ */
+ cfg80211_remain_on_channel_expired(wk->sdata->dev, (u64)wk,
+ wk->chan, wk->chan_type,
+ GFP_KERNEL);
+
+ return WORK_DONE_DESTROY;
+}
+
+int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, u64 *cookie)
+{
+ struct ieee80211_work *wk;
+
+ wk = kzalloc(sizeof(*wk), GFP_KERNEL);
+ if (!wk)
+ return -ENOMEM;
+
+ wk->type = IEEE80211_WORK_REMAIN_ON_CHANNEL;
+ wk->chan = chan;
+ wk->chan_type = channel_type;
+ wk->sdata = sdata;
+ wk->done = ieee80211_remain_done;
+
+ wk->remain.duration = duration;
+
+ *cookie = (u64)wk;
+
+ ieee80211_add_work(wk);
+
+ return 0;
+}
+
+int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata,
+ u64 cookie)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_work *wk, *tmp;
+ bool found = false;
+
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry_safe(wk, tmp, &local->work_list, list) {
+ if ((u64)wk == cookie) {
+ wk->timeout = jiffies;
+ found = true;
+ break;
+ }
+ }
+ mutex_unlock(&local->work_mtx);
+
+ if (!found)
+ return -ENOENT;
+
+ ieee80211_queue_work(&local->hw, &local->work_work);
+
+ return 0;
+}
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 8419971..d0ee290 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -94,21 +94,6 @@
If unsure, say N.
-config WIRELESS_OLD_REGULATORY
- bool "Old wireless static regulatory definitions"
- default n
- depends on CFG80211
- ---help---
- This option enables the old static regulatory information
- and uses it within the new framework. This option is available
- for historical reasons and it is advised to leave it off.
-
- For details see:
-
- http://wireless.kernel.org/en/developers/Regulatory
-
- Say N and if you say Y, please tell us why. The default is N.
-
config CFG80211_INTERNAL_REGDB
bool "use statically compiled regulatory rules database" if EMBEDDED
default n
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index a46ac6c..bf1737f 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -41,12 +41,45 @@
return result;
}
+struct ieee80211_channel *
+rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
+ int freq, enum nl80211_channel_type channel_type)
+{
+ struct ieee80211_channel *chan;
+ struct ieee80211_sta_ht_cap *ht_cap;
+
+ chan = ieee80211_get_channel(&rdev->wiphy, freq);
+
+ /* Primary channel not allowed */
+ if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
+ return NULL;
+
+ if (channel_type == NL80211_CHAN_HT40MINUS &&
+ chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
+ return NULL;
+ else if (channel_type == NL80211_CHAN_HT40PLUS &&
+ chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
+ return NULL;
+
+ ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
+
+ if (channel_type != NL80211_CHAN_NO_HT) {
+ if (!ht_cap->ht_supported)
+ return NULL;
+
+ if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
+ ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
+ return NULL;
+ }
+
+ return chan;
+}
+
int rdev_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *for_wdev,
int freq, enum nl80211_channel_type channel_type)
{
struct ieee80211_channel *chan;
- struct ieee80211_sta_ht_cap *ht_cap;
int result;
if (rdev_fixed_channel(rdev, for_wdev))
@@ -55,30 +88,10 @@
if (!rdev->ops->set_channel)
return -EOPNOTSUPP;
- chan = ieee80211_get_channel(&rdev->wiphy, freq);
-
- /* Primary channel not allowed */
- if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
+ chan = rdev_freq_to_chan(rdev, freq, channel_type);
+ if (!chan)
return -EINVAL;
- if (channel_type == NL80211_CHAN_HT40MINUS &&
- chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
- return -EINVAL;
- else if (channel_type == NL80211_CHAN_HT40PLUS &&
- chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
- return -EINVAL;
-
- ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
-
- if (channel_type != NL80211_CHAN_NO_HT) {
- if (!ht_cap->ht_supported)
- return -EINVAL;
-
- if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
- ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
- return -EINVAL;
- }
-
result = rdev->ops->set_channel(&rdev->wiphy, chan, channel_type);
if (result)
return result;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 35b7121..30ec95f 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -374,6 +374,9 @@
struct ieee80211_channel *
rdev_fixed_channel(struct cfg80211_registered_device *rdev,
struct wireless_dev *for_wdev);
+struct ieee80211_channel *
+rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
+ int freq, enum nl80211_channel_type channel_type);
int rdev_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *for_wdev,
int freq, enum nl80211_channel_type channel_type);
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index acaeaa7..94d151f 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -93,7 +93,18 @@
}
}
- WARN_ON(!bss);
+ /*
+ * We might be coming here because the driver reported
+ * a successful association at the same time as the
+ * user requested a deauth. In that case, we will have
+ * removed the BSS from the auth_bsses list due to the
+ * deauth request when the assoc response makes it. If
+ * the two code paths acquire the lock the other way
+ * around, that's just the standard situation of a
+ * deauth being requested while connected.
+ */
+ if (!bss)
+ goto out;
} else if (wdev->conn) {
cfg80211_sme_failed_assoc(wdev);
/*
@@ -680,3 +691,40 @@
}
}
}
+
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp)
+{
+ struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ nl80211_send_remain_on_channel(rdev, dev, cookie, chan, channel_type,
+ duration, gfp);
+}
+EXPORT_SYMBOL(cfg80211_ready_on_channel);
+
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+ u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ gfp_t gfp)
+{
+ struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ nl80211_send_remain_on_channel_cancel(rdev, dev, cookie, chan,
+ channel_type, gfp);
+}
+EXPORT_SYMBOL(cfg80211_remain_on_channel_expired);
+
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp)
+{
+ struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ nl80211_send_sta_event(rdev, dev, mac_addr, sinfo, gfp);
+}
+EXPORT_SYMBOL(cfg80211_new_sta);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7cb0d64..e3bee3c 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -141,6 +141,8 @@
[NL80211_ATTR_4ADDR] = { .type = NLA_U8 },
[NL80211_ATTR_PMKID] = { .type = NLA_BINARY,
.len = WLAN_PMKID_LEN },
+ [NL80211_ATTR_DURATION] = { .type = NLA_U32 },
+ [NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
};
/* policy for the attributes */
@@ -569,6 +571,7 @@
CMD(set_pmksa, SET_PMKSA);
CMD(del_pmksa, DEL_PMKSA);
CMD(flush_pmksa, FLUSH_PMKSA);
+ CMD(remain_on_channel, REMAIN_ON_CHANNEL);
if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
@@ -1639,7 +1642,7 @@
static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
int flags, struct net_device *dev,
- u8 *mac_addr, struct station_info *sinfo)
+ const u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
struct nlattr *sinfoattr, *txrate;
@@ -2550,12 +2553,6 @@
data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
-#ifdef CONFIG_WIRELESS_OLD_REGULATORY
- /* We ignore world regdom requests with the old regdom setup */
- if (is_world_regdom(data))
- return -EINVAL;
-#endif
-
r = regulatory_hint_user(data);
return r;
@@ -4289,6 +4286,143 @@
}
+static int nl80211_remain_on_channel(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
+ struct ieee80211_channel *chan;
+ struct sk_buff *msg;
+ void *hdr;
+ u64 cookie;
+ enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+ u32 freq, duration;
+ int err;
+
+ if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+ !info->attrs[NL80211_ATTR_DURATION])
+ return -EINVAL;
+
+ duration = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
+
+ /*
+ * We should be on that channel for at least one jiffie,
+ * and more than 5 seconds seems excessive.
+ */
+ if (!duration || !msecs_to_jiffies(duration) || duration > 5000)
+ return -EINVAL;
+
+ rtnl_lock();
+
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+ if (err)
+ goto unlock_rtnl;
+
+ if (!rdev->ops->remain_on_channel) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
+ channel_type = nla_get_u32(
+ info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
+ if (channel_type != NL80211_CHAN_NO_HT &&
+ channel_type != NL80211_CHAN_HT20 &&
+ channel_type != NL80211_CHAN_HT40PLUS &&
+ channel_type != NL80211_CHAN_HT40MINUS)
+ err = -EINVAL;
+ goto out;
+ }
+
+ freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ chan = rdev_freq_to_chan(rdev, freq, channel_type);
+ if (chan == NULL) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+ NL80211_CMD_REMAIN_ON_CHANNEL);
+
+ if (IS_ERR(hdr)) {
+ err = PTR_ERR(hdr);
+ goto free_msg;
+ }
+
+ err = rdev->ops->remain_on_channel(&rdev->wiphy, dev, chan,
+ channel_type, duration, &cookie);
+
+ if (err)
+ goto free_msg;
+
+ NLA_PUT_U64(msg, NL80211_ATTR_COOKIE, cookie);
+
+ genlmsg_end(msg, hdr);
+ err = genlmsg_reply(msg, info);
+ goto out;
+
+ nla_put_failure:
+ err = -ENOBUFS;
+ free_msg:
+ nlmsg_free(msg);
+ out:
+ cfg80211_unlock_rdev(rdev);
+ dev_put(dev);
+ unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
+static int nl80211_cancel_remain_on_channel(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
+ u64 cookie;
+ int err;
+
+ if (!info->attrs[NL80211_ATTR_COOKIE])
+ return -EINVAL;
+
+ rtnl_lock();
+
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+ if (err)
+ goto unlock_rtnl;
+
+ if (!rdev->ops->cancel_remain_on_channel) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
+
+ err = rdev->ops->cancel_remain_on_channel(&rdev->wiphy, dev, cookie);
+
+ out:
+ cfg80211_unlock_rdev(rdev);
+ dev_put(dev);
+ unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
@@ -4551,8 +4685,20 @@
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
-
+ {
+ .cmd = NL80211_CMD_REMAIN_ON_CHANNEL,
+ .doit = nl80211_remain_on_channel,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+ .doit = nl80211_cancel_remain_on_channel,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
+
static struct genl_multicast_group nl80211_mlme_mcgrp = {
.name = "mlme",
};
@@ -5140,6 +5286,89 @@
nlmsg_free(msg);
}
+static void nl80211_send_remain_on_chan_event(
+ int cmd, struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, chan->center_freq);
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, channel_type);
+ NLA_PUT_U64(msg, NL80211_ATTR_COOKIE, cookie);
+
+ if (cmd == NL80211_CMD_REMAIN_ON_CHANNEL)
+ NLA_PUT_U32(msg, NL80211_ATTR_DURATION, duration);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+}
+
+void nl80211_send_remain_on_channel(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp)
+{
+ nl80211_send_remain_on_chan_event(NL80211_CMD_REMAIN_ON_CHANNEL,
+ rdev, netdev, cookie, chan,
+ channel_type, duration, gfp);
+}
+
+void nl80211_send_remain_on_channel_cancel(
+ struct cfg80211_registered_device *rdev, struct net_device *netdev,
+ u64 cookie, struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type, gfp_t gfp)
+{
+ nl80211_send_remain_on_chan_event(NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+ rdev, netdev, cookie, chan,
+ channel_type, 0, gfp);
+}
+
+void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp)
+{
+ struct sk_buff *msg;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
+ if (!msg)
+ return;
+
+ if (nl80211_send_station(msg, 0, 0, 0, dev, mac_addr, sinfo) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+}
+
/* initialisation/exit functions */
int nl80211_init(void)
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index 44cc2a7..14855b8 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -59,4 +59,19 @@
struct net_device *netdev, const u8 *bssid,
gfp_t gfp);
+void nl80211_send_remain_on_channel(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp);
+void nl80211_send_remain_on_channel_cancel(
+ struct cfg80211_registered_device *rdev, struct net_device *netdev,
+ u64 cookie, struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type, gfp_t gfp);
+
+void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
+
#endif /* __NET_WIRELESS_NL80211_H */
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index dc13c3f..87ea60d 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -129,78 +129,6 @@
module_param(ieee80211_regdom, charp, 0444);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
-#ifdef CONFIG_WIRELESS_OLD_REGULATORY
-/*
- * We assume 40 MHz bandwidth for the old regulatory work.
- * We make emphasis we are using the exact same frequencies
- * as before
- */
-
-static const struct ieee80211_regdomain us_regdom = {
- .n_reg_rules = 6,
- .alpha2 = "US",
- .reg_rules = {
- /* IEEE 802.11b/g, channels 1..11 */
- REG_RULE(2412-10, 2462+10, 40, 6, 27, 0),
- /* IEEE 802.11a, channel 36..48 */
- REG_RULE(5180-10, 5240+10, 40, 6, 17, 0),
- /* IEEE 802.11a, channels 48..64 */
- REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_DFS),
- /* IEEE 802.11a, channels 100..124 */
- REG_RULE(5500-10, 5590+10, 40, 6, 20, NL80211_RRF_DFS),
- /* IEEE 802.11a, channels 132..144 */
- REG_RULE(5660-10, 5700+10, 40, 6, 20, NL80211_RRF_DFS),
- /* IEEE 802.11a, channels 149..165, outdoor */
- REG_RULE(5745-10, 5825+10, 40, 6, 30, 0),
- }
-};
-
-static const struct ieee80211_regdomain jp_regdom = {
- .n_reg_rules = 6,
- .alpha2 = "JP",
- .reg_rules = {
- /* IEEE 802.11b/g, channels 1..11 */
- REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
- /* IEEE 802.11b/g, channels 12..13 */
- REG_RULE(2467-10, 2472+10, 20, 6, 20, 0),
- /* IEEE 802.11b/g, channel 14 */
- REG_RULE(2484-10, 2484+10, 20, 6, 20, NL80211_RRF_NO_OFDM),
- /* IEEE 802.11a, channels 36..48 */
- REG_RULE(5180-10, 5240+10, 40, 6, 20, 0),
- /* IEEE 802.11a, channels 52..64 */
- REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_DFS),
- /* IEEE 802.11a, channels 100..144 */
- REG_RULE(5500-10, 5700+10, 40, 6, 23, NL80211_RRF_DFS),
- }
-};
-
-static const struct ieee80211_regdomain *static_regdom(char *alpha2)
-{
- if (alpha2[0] == 'U' && alpha2[1] == 'S')
- return &us_regdom;
- if (alpha2[0] == 'J' && alpha2[1] == 'P')
- return &jp_regdom;
- /* Use world roaming rules for "EU", since it was a pseudo
- domain anyway... */
- if (alpha2[0] == 'E' && alpha2[1] == 'U')
- return &world_regdom;
- /* Default, world roaming rules */
- return &world_regdom;
-}
-
-static bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
-{
- if (rd == &us_regdom || rd == &jp_regdom || rd == &world_regdom)
- return true;
- return false;
-}
-#else
-static inline bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
-{
- return false;
-}
-#endif
-
static void reset_regdomains(void)
{
/* avoid freeing static information or freeing something twice */
@@ -210,8 +138,6 @@
cfg80211_world_regdom = NULL;
if (cfg80211_regdomain == &world_regdom)
cfg80211_regdomain = NULL;
- if (is_old_static_regdom(cfg80211_regdomain))
- cfg80211_regdomain = NULL;
kfree(cfg80211_regdomain);
kfree(cfg80211_world_regdom);
@@ -1490,8 +1416,6 @@
return REG_INTERSECT;
case NL80211_REGDOM_SET_BY_DRIVER:
if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) {
- if (is_old_static_regdom(cfg80211_regdomain))
- return 0;
if (regdom_changes(pending_request->alpha2))
return 0;
return -EALREADY;
@@ -1528,8 +1452,7 @@
return -EAGAIN;
}
- if (!is_old_static_regdom(cfg80211_regdomain) &&
- !regdom_changes(pending_request->alpha2))
+ if (!regdom_changes(pending_request->alpha2))
return -EALREADY;
return 0;
@@ -2111,8 +2034,7 @@
* If someone else asked us to change the rd lets only bother
* checking if the alpha2 changes if CRDA was already called
*/
- if (!is_old_static_regdom(cfg80211_regdomain) &&
- !regdom_changes(rd->alpha2))
+ if (!regdom_changes(rd->alpha2))
return -EINVAL;
}
@@ -2311,15 +2233,8 @@
spin_lock_init(®_requests_lock);
spin_lock_init(®_pending_beacons_lock);
-#ifdef CONFIG_WIRELESS_OLD_REGULATORY
- cfg80211_regdomain = static_regdom(ieee80211_regdom);
-
- printk(KERN_INFO "cfg80211: Using static regulatory domain info\n");
- print_regdomain_info(cfg80211_regdomain);
-#else
cfg80211_regdomain = cfg80211_world_regdom;
-#endif
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_regdomain->alpha2);
if (err) {
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 12dfa62..0c2cbbe 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -601,7 +601,7 @@
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
struct iw_scan_req *wreq = NULL;
- struct cfg80211_scan_request *creq;
+ struct cfg80211_scan_request *creq = NULL;
int i, err, n_channels = 0;
enum ieee80211_band band;
@@ -694,8 +694,10 @@
/* translate "Scan for SSID" request */
if (wreq) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
- if (wreq->essid_len > IEEE80211_MAX_SSID_LEN)
- return -EINVAL;
+ if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) {
+ err = -EINVAL;
+ goto out;
+ }
memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len);
creq->ssids[0].ssid_len = wreq->essid_len;
}
@@ -707,12 +709,15 @@
err = rdev->ops->scan(wiphy, dev, creq);
if (err) {
rdev->scan_req = NULL;
- kfree(creq);
+ /* creq will be freed below */
} else {
nl80211_send_scan_start(rdev, dev);
+ /* creq now owned by driver */
+ creq = NULL;
dev_hold(dev);
}
out:
+ kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
}